FE Exam Practice Test

Fundamentals of Engineering (FE) exam

FE Exam overview

  • 200 practice questions
  • 32 flashcards
  • 10 study guide topics
  • 38 key terms

What you'll study

  • Mathematics10%
  • Probability and Statistics10%
  • Engineering Economics10%
  • Ethics and Professional Practice10%
  • Engineering Mechanics10%
  • Materials Science10%
  • Fluid Mechanics10%
  • Thermodynamics10%
  • Electrical and Computer Engineering10%
  • Safety, Health, and Environment10%

The Fundamentals of Engineering (FE) exam is generally the first step in the process of becoming a licensed professional engineer (P.E.). It is designed for recent graduates and for students who are close to finishing an undergraduate engineering degree from an EAC/ABET-accredited program. It is a computer-based exam administered year-round at NCEES-approved Pearson test centers, and candidates register and schedule through a MyNCEES account, choosing an exam location and then selecting from available dates; if the local choices do not suit them, they can browse dates at other approved test centers. The appointment is 6 hours long and includes a 2-minute nondisclosure agreement, an 8-minute tutorial, 5 hours and 20 minutes of exam time, and a 25-minute scheduled break. The exam contains 110 questions, and a $225 fee is payable directly to NCEES. Content spans foundational engineering subjects such as mathematics, probability and statistics, engineering economics, ethics and professional practice, mechanics, materials, fluid mechanics, thermodynamics, electrical and computer engineering, and safety, health, and environment, with depth depending on the discipline selected. Preparation usually means reviewing the exam specifications for your discipline, rebuilding core theory and unit discipline, and practicing timed problem sets. Results are reported as pass or fail, typically within 7–10 business days.

Common mistakes

Leaves the calculator in degree mode and then differentiates or integrates trigonometric functions, or evaluates inverse trig results, without converting the angle to radians.

Earlier statics or surveying-style problems trained the candidate to work in degrees, and the mode setting is not visible on the display during a fast-paced exam.

What to do instead

Before any calculus, series expansion, or trig identity, switch the calculator to radian mode and write 'rad' next to every angle symbol in the work. If a problem states degrees, convert explicitly (multiply by pi/180) rather than relying on the mode.

Uses a z critical value and divides by n when constructing a confidence interval from a small sample with an unknown population standard deviation.

The normal distribution is over-learned from introductory problems, and the t-distribution is treated as a minor variant rather than a required condition when sigma is unknown and n is small.

What to do instead

Apply a two-question check before every interval: is sigma known, and is n at least 30? If sigma is unknown and n is small, use t with n-1 degrees of freedom and compute s with the n-1 denominator.

Multiplies an annual cost by the number of years instead of using the correct annuity or gradient factor, or applies a per-year factor when the compounding period differs from the payment period.

Cash-flow timing is handled mentally rather than drawn, and nominal annual rates are used directly without converting to an effective rate per payment period.

What to do instead

Draw the cash-flow diagram with arrows at the actual time points before selecting a factor, and convert the nominal rate to an effective rate per payment period (i = (1 + r/m)^m - 1, or r/m for the payment period) before looking up any factor.

Selects the option that documents the issue and waits for a supervisor when the scenario involves an imminent threat to public health or safety, or picks the option that is merely legal rather than the one the engineering canon requires.

Workplace loyalty and legal-permissibility reasoning are over-weighted, and the candidate answers as a private employee rather than applying the profession's public-first duty.

What to do instead

Rank the answer choices against a fixed hierarchy: public health and safety first, then competence and honesty, then client and employer interests. When harm is imminent, choose the option that acts to prevent it, not the one that only reports or records it.

Sums forces or moments without a free-body diagram, omits a reaction moment at a fixed support, or assumes a truss member is zero-force without checking the joint equilibrium.

The candidate tries to save time by shortcutting the diagram, and sign conventions are chosen inconsistently between the horizontal and vertical directions.

What to do instead

Always sketch the free-body diagram with a labeled coordinate system before writing equations, and take moments about the point that passes through the most unknown force lines. Verify each claimed zero-force member by checking that the joint has only two members and no external load or reaction.

Applies Hooke's law or the elastic elongation formula to a stress that exceeds the yield strength, or mixes engineering stress and strain with true stress and strain.

The elastic formulas are the most practiced, and the yield strength check is skipped when the applied load is given directly rather than as a stress.

What to do instead

Compute the applied stress first and compare it to the yield strength before using any elastic relationship. If the stress exceeds yield, state that the deformation is plastic and use true stress/strain or the given hardening model; keep engineering and true quantities consistently labeled.

Combines gage pressure on one side of the energy or hydrostatics equation with absolute pressure on the other, or omits atmospheric pressure when the problem asks for an absolute value.

Problem statements often give gage readings while property tables and the ideal gas law require absolute values, and the reference is not tracked once numbers are substituted.

What to do instead

At the start of the solution, convert every pressure to one reference (usually absolute) and write 'abs' or 'gage' beside each value. Add or subtract atmospheric pressure explicitly in the final step if the requested answer uses a different reference.

Substitutes a Celsius temperature directly into the ideal gas law or an entropy expression, or flips the sign convention for work and heat between the first-law equation and the property tables.

Temperature is read off the problem statement without conversion, and different textbook sign conventions are blended within one solution.

What to do instead

Convert all temperatures to absolute units (kelvin or rankine) immediately after reading the problem, before any substitution. At the top of the work, write the chosen sign convention (for example, work positive out, heat positive in) and check every term against it.

Uses peak voltage or current in a power calculation for an AC circuit, or drops a milli/kilo prefix when substituting into Ohm's law or a reactance formula.

DC formulas are over-practiced and the AC distinction between peak and RMS is glossed over, while unit prefixes are converted mentally under time pressure.

What to do instead

For AC power, use RMS values and state explicitly whether the given value is peak or RMS before squaring. Convert every quantity to base SI units with a written factor (for example, 4.7 kilohms = 4.7 x 10^3 ohms) before substituting.

Selects personal protective equipment, such as a respirator or gloves, as the primary control for a hazard instead of an engineering or substitution control.

PPE is the most familiar control from field experience and is easy to picture, so it is chosen without walking through the control hierarchy.

What to do instead

Before selecting an answer, run the hierarchy of controls in order: elimination, substitution, engineering controls, administrative controls, then PPE. PPE is only correct as the primary answer when higher-level controls are shown to be infeasible in the scenario.

Exam requirements can change. Confirm current details with the exam provider.

FE Exam practice

200 questions. Each one lists the choices, the correct answer, and an explanation. With JavaScript, this list opens one question at a time. The checker at the top of this page saves progress in this browser when it is available.

  1. Question 1Mathematics

    Evaluate the limit: lim(x→2) (x² − 4)/(x − 2).

    1. 4 Correct answer.
    2. The limit does not exist
    3. 2
    4. 0

    Explanation

    Factor the numerator as (x − 2)(x + 2) and cancel the common factor (x − 2) for x ≠ 2, leaving x + 2. Substituting x = 2 into the simplified expression gives 4. The original quotient has a removable discontinuity at x = 2, but the two-sided limit still exists.

  2. Question 2Mathematics

    What is the derivative of f(x) = sin(3x) with respect to x?

    1. cos(3x)
    2. 3sin(3x)
    3. 3cos(3x) Correct answer.
    4. −3cos(3x)

    Explanation

    The chain rule states that d/dx f(g(x)) = f′(g(x))·g′(x). The outer function is sine, whose derivative is cosine, and the inner function 3x has derivative 3. Multiplying these together gives 3cos(3x).

  3. Question 3Mathematics

    What is the determinant of the matrix [[2, 1], [5, 3]]?

    1. 6
    2. 5
    3. 11
    4. 1 Correct answer.

    Explanation

    For a 2×2 matrix [[a, b], [c, d]] the determinant is ad − bc. Substituting the entries gives (2)(3) − (1)(5) = 6 − 5 = 1.

  4. Question 4Mathematics

    Express the product (3 + 2i)(1 − 4i) in the form a + bi.

    1. 11 + 10i
    2. 11 − 10i Correct answer.
    3. −5 − 10i
    4. 3 − 8i

    Explanation

    Expand term by term and use i² = −1: (3)(1) + (3)(−4i) + (2i)(1) + (2i)(−4i) = 3 − 12i + 2i + 8. Combining the real parts (3 + 8) and the imaginary parts (−12i + 2i) gives 11 − 10i.

  5. Question 5Mathematics

    A triangle has two sides of length 5 and 7 with an included angle of 60°. What is the length of the third side?

    1. 7
    2. √74
    3. √109
    4. √39 Correct answer.

    Explanation

    The law of cosines gives c² = a² + b² − 2ab·cos C. Substituting a = 5, b = 7, and C = 60° yields c² = 25 + 49 − 2(5)(7)(0.5) = 39, so c = √39 ≈ 6.24.

  6. Question 6Mathematics

    Evaluate the definite integral ∫₀² 3x² dx.

    1. 8 Correct answer.
    2. 4
    3. 6
    4. 12

    Explanation

    The antiderivative of 3x² is x³, since the derivative of x³ is 3x². Evaluating x³ at the upper limit 2 and subtracting its value at the lower limit 0 gives 8 − 0 = 8.

  7. Question 7Mathematics

    Evaluate the definite integral ∫₀¹ x·eˣ dx.

    1. e − 1
    2. e + 1
    3. 1 Correct answer.
    4. e

    Explanation

    Integration by parts with u = x and dv = eˣ dx gives ∫x·eˣ dx = x·eˣ − eˣ = (x − 1)eˣ. Evaluating this antiderivative at x = 1 gives 0, and at x = 0 gives −1, so the integral equals 0 − (−1) = 1.

  8. Question 8Mathematics

    A constant force F = (3, −2, 5) newtons acts through a displacement d = (2, 4, −1) meters. What is the work done by the force?

    1. −7 Correct answer.
    2. −3
    3. 9
    4. 19

    Explanation

    Work equals the dot product F·d, which is the sum of the componentwise products. Here 6 − 8 − 5 = −7 joules, meaning the force removes energy along this displacement.

  9. Question 9Mathematics

    A manufacturing process produces defective parts with probability 0.2, independently of one another. What is the probability that exactly 2 of 5 parts are defective?

    1. 0.4096
    2. 0.0512
    3. 0.2048 Correct answer.
    4. 0.8

    Explanation

    The binomial probability is C(n, k)·pᵏ·(1 − p)^(n − k). With n = 5, k = 2, and p = 0.2, this is 10 × 0.04 × 0.512 = 0.2048.

  10. Question 10Mathematics

    A quality characteristic is normally distributed with mean 50 and standard deviation 10. What is the probability that a single measurement is less than 60?

    1. 0.9772
    2. 0.6827
    3. 0.1587
    4. 0.8413 Correct answer.

    Explanation

    Standardize the value: z = (60 − 50)/10 = 1. From the standard normal table, the cumulative probability P(Z < 1) is approximately 0.8413.

  11. Question 11Mathematics

    Which of the following infinite series converges?

    1. ∑ 1/n³ Correct answer.
    2. ∑ 1/(n ln n)
    3. ∑ 1/n
    4. ∑ 1/√n

    Explanation

    A p-series ∑1/nᵖ converges exactly when p > 1. Of the choices, only 1/n³ has an exponent greater than 1, so it is the only convergent series listed.

  12. Question 12Mathematics

    Solve the initial value problem dy/dx = 2xy with y(0) = 3.

    1. y = e^(x²) + 1
    2. y = 3 + x²
    3. y = 3e^(x²) Correct answer.
    4. y = 3e^(2x)

    Explanation

    The equation is separable: dy/y = 2x dx, so ln y = x² + C. Applying the initial condition gives C = ln 3, hence y = 3e^(x²).

  13. Question 13Mathematics

    For f(x, y) = x²y³ + 2x, what is the mixed partial derivative ∂²f/∂x∂y?

    1. 2xy³ + 2
    2. 3x²y²
    3. 6x²y
    4. 6xy² Correct answer.

    Explanation

    Differentiating first with respect to y, treating x as a constant, gives ∂f/∂y = 3x²y². Differentiating that result with respect to x gives 6xy².

  14. Question 14Mathematics

    What is the area of the region bounded by y = x and y = x² between x = 0 and x = 1?

    1. 1/3
    2. 1/2
    3. 1/12
    4. 1/6 Correct answer.

    Explanation

    On the interval from 0 to 1 the line lies above the parabola, so the area is ∫₀¹ (x − x²) dx = x²/2 − x³/3 evaluated from 0 to 1. This gives 1/2 − 1/3 = 1/6.

  15. Question 15Mathematics

    A radioactive substance has a half-life of 5 years. What fraction of an initial sample remains after 15 years?

    1. 1/3
    2. 1/4
    3. 1/8 Correct answer.
    4. 1/16

    Explanation

    Each half-life multiplies the remaining amount by 1/2. Fifteen years spans three half-lives, so the remaining fraction is (1/2)³ = 1/8.

  16. Question 16Mathematics

    Solve the linear system 2x + 3y = 7 and x − y = 1 for (x, y).

    1. (3, −1)
    2. (1, 2)
    3. (2, 1) Correct answer.
    4. (0, 1)

    Explanation

    The second equation gives x = 1 + y. Substituting into the first yields 2(1 + y) + 3y = 7, so 5y = 5 and y = 1, which makes x = 2.

  17. Question 17Mathematics

    What are the eigenvalues of the matrix [[4, 1], [2, 3]]?

    1. 5 and 2 Correct answer.
    2. 4 and 3
    3. 7 and 2
    4. 10 and 1

    Explanation

    Eigenvalues satisfy λ² − (trace)λ + det = 0. The trace is 7 and the determinant is (4)(3) − (1)(2) = 10, so λ² − 7λ + 10 = 0 factors as (λ − 5)(λ − 2) = 0.

  18. Question 18Mathematics

    What is the Laplace transform of f(t) = t·e^(2t)?

    1. e^(2s)/s²
    2. 1/(s² − 4)
    3. 2/(s − 2)
    4. 1/(s − 2)² Correct answer.

    Explanation

    The transform of t is 1/s², and multiplying a function by e^(at) shifts the transform by replacing s with s − a. Applying a = 2 gives 1/(s − 2)², valid for s > 2.

  19. Question 19Mathematics

    Using the Maclaurin series for e^(x²), what is the coefficient of x⁴?

    1. 1
    2. 1/24
    3. 1/6
    4. 1/2 Correct answer.

    Explanation

    The Maclaurin series for eᵘ is Σ uⁿ/n!. Substituting u = x² gives Σ x^(2n)/n!, so the x⁴ term arises from n = 2 and has coefficient 1/2! = 1/2.

  20. Question 20Mathematics

    One step of the Newton–Raphson method is applied to f(x) = x² − 2 starting from x₀ = 1. What is x₁?

    1. 1.25
    2. 2
    3. 1.5 Correct answer.
    4. 1

    Explanation

    Newton–Raphson uses x₁ = x₀ − f(x₀)/f′(x₀). Here f(1) = −1 and f′(1) = 2, so x₁ = 1 − (−1)/2 = 1.5, which is closer to √2 than the starting guess.

  21. Question 21Probability and Statistics

    A component fails during a stress test with probability 0.35. What is the probability that the component does not fail during the test?

    1. 0.55
    2. 0.65 Correct answer.
    3. 1.00
    4. 0.35

    Explanation

    The complement rule states that P(A') = 1 - P(A) for any event A and its complement. Here the complement of 'fails' is 'does not fail', so the probability is 1 - 0.35 = 0.65. The two events together must account for the entire sample space, whose probability is 1.

  22. Question 22Probability and Statistics

    A discrete random variable X takes the value 1 with probability 0.2, the value 2 with probability 0.5, and the value 3 with probability 0.3. What is the expected value of X?

    1. 6.0
    2. 1.0
    3. 2.1 Correct answer.
    4. 2.0

    Explanation

    The expected value is the probability-weighted sum E[X] = sum of x times P(x). Computing gives 1(0.2) + 2(0.5) + 3(0.3) = 0.2 + 1.0 + 0.9 = 2.1. Each outcome must be weighted by its own probability rather than treated equally.

  23. Question 23Probability and Statistics

    A binomial random variable has n = 25 independent trials and success probability p = 0.2. What is the variance of this random variable?

    1. 2
    2. 4 Correct answer.
    3. 20
    4. 5

    Explanation

    For a binomial random variable the variance is np(1 - p). Substituting gives 25(0.2)(0.8) = 4. The mean is np = 5, which is a separate quantity from the variance.

  24. Question 24Probability and Statistics

    For a strongly right-skewed distribution of a data set, which statement about its center is true?

    1. The median exceeds the mean
    2. The mean exceeds the median Correct answer.
    3. The mean equals the variance
    4. The mean equals the median

    Explanation

    In a right-skewed distribution the long tail of large values pulls the mean toward the tail, while the median stays near the bulk of the data. Consequently the mean is greater than the median whenever the skew is to the right. The reverse ordering occurs for left-skewed data.

  25. Question 25Probability and Statistics

    In hypothesis testing, a Type I error occurs in which situation?

    1. Rejecting a true null hypothesis Correct answer.
    2. Accepting a true null hypothesis
    3. Rejecting a false null hypothesis
    4. Accepting a false null hypothesis

    Explanation

    A Type I error is a false rejection: the null hypothesis is actually true, but the sample evidence leads the analyst to reject it. Its probability is controlled by the significance level alpha. The complementary mistake, failing to reject a false null, is a Type II error.

  26. Question 26Probability and Statistics

    Two relays operate independently, and both must work for a system to function. Relay A works with probability 0.98 and relay B works with probability 0.95. What is the probability that the system functions?

    1. 0.931 Correct answer.
    2. 0.965
    3. 0.070
    4. 0.001

    Explanation

    For independent events the probability that both occur is the product of their probabilities. Therefore the system works with probability 0.98 times 0.95 = 0.931. Independence is essential here; the probabilities are not added.

  27. Question 27Probability and Statistics

    For two events A and B, P(A) = 0.5, P(B) = 0.4, and P(A and B) = 0.2. What is P(A given B)?

    1. 0.70
    2. 0.50 Correct answer.
    3. 0.20
    4. 0.40

    Explanation

    Conditional probability is defined as P(A|B) = P(A and B) / P(B). Substituting the given values gives 0.2 / 0.4 = 0.50. Dividing by P(B) restricts attention to the portion of the sample space where B has occurred.

  28. Question 28Probability and Statistics

    For two events A and B, P(A) = 0.4, P(B) = 0.5, and P(A and B) = 0.25. What is P(A or B)?

    1. 0.20
    2. 0.65 Correct answer.
    3. 0.25
    4. 0.90

    Explanation

    The general addition rule is P(A or B) = P(A) + P(B) - P(A and B), because the intersection is counted twice when the probabilities are added. Substituting gives 0.4 + 0.5 - 0.25 = 0.65. The subtraction is required whether or not the events are independent.

  29. Question 29Probability and Statistics

    A normally distributed random variable has mean 100 and standard deviation 15. Using a standard normal table, what is the probability that a single observation exceeds 130?

    1. 0.0228 Correct answer.
    2. 0.0456
    3. 0.1587
    4. 0.9772

    Explanation

    Standardizing gives z = (130 - 100)/15 = 2.00. The standard normal table gives P(Z < 2.00) = 0.9772, so the upper-tail probability is 1 - 0.9772 = 0.0228. The tail area above the z value is the requested probability.

  30. Question 30Probability and Statistics

    A population has standard deviation 12, and random samples of size 36 are drawn. What is the standard error of the sample mean?

    1. 2.0 Correct answer.
    2. 12
    3. 72
    4. 0.33

    Explanation

    The standard error of the sample mean is sigma divided by the square root of n. With sigma = 12 and n = 36, the square root of n is 6, so the standard error is 12/6 = 2.0. This quantity describes the spread of the sampling distribution of the mean.

  31. Question 31Probability and Statistics

    A sample of size 25 has mean 60. The population standard deviation is known to be 10, and the population is normal. What is the 95% confidence interval for the population mean?

    1. (56.00, 64.00)
    2. (56.71, 63.29)
    3. (56.08, 63.92) Correct answer.
    4. (58.04, 61.96)

    Explanation

    For a known sigma the interval is the sample mean plus or minus z times sigma divided by the square root of n. The standard error is 10/5 = 2, and the 95% critical value is 1.96, giving a margin of 3.92. The interval is therefore 60 plus or minus 3.92, or (56.08, 63.92).

  32. Question 32Probability and Statistics

    A sample consists of the five values 2, 4, 6, 8, and 10. What is the sample standard deviation?

    1. 2.828
    2. 10.000
    3. 2.000
    4. 3.162 Correct answer.

    Explanation

    The sample mean is 6, and the squared deviations are 16, 4, 0, 4, and 16, which sum to 40. Dividing by n - 1 = 4 gives a sample variance of 10, so the sample standard deviation is the square root of 10, approximately 3.162. Division by n - 1 rather than n makes the estimator unbiased.

  33. Question 33Probability and Statistics

    A simple linear regression of y on x yields a correlation coefficient of 0.80. Which statement correctly interprets this result?

    1. 64% of the variation in y is explained by the regression Correct answer.
    2. 64% of the data points fall on the regression line
    3. 80% of the variation in y is explained by the regression
    4. The slope of the regression line equals 0.80

    Explanation

    The coefficient of determination is the square of the correlation, so r-squared equals 0.80 squared, or 0.64. This means about 64% of the variability in the response variable is accounted for by the fitted linear relationship. The remaining variation is due to factors not captured by the model.

  34. Question 34Probability and Statistics

    How many distinct groups of 3 can be selected from a set of 8 items when order of selection does not matter?

    1. 56 Correct answer.
    2. 512
    3. 24
    4. 336

    Explanation

    Because order does not matter, the count is the number of combinations C(8,3) = 8! / (3! 5!) = 56. The denominator divided by 3! removes the repeated orderings of each group. Permutations would be used only if the order mattered.

  35. Question 35Probability and Statistics

    Calls arrive at a help desk according to a Poisson process with an average of 3 calls per hour. What is the probability of exactly 2 calls in a given hour?

    1. 0.149
    2. 0.224 Correct answer.
    3. 0.448
    4. 0.050

    Explanation

    The Poisson probability of exactly k events is e to the minus lambda times lambda to the k divided by k factorial. With lambda = 3 and k = 2, the result is e^-3 times 9 divided by 2, which equals 0.224. The factorial in the denominator accounts for the indistinguishability of the two events.

  36. Question 36Probability and Statistics

    The lifetime of a component follows an exponential distribution with a mean of 5 years. What is the probability that a component lasts more than 5 years?

    1. 0.632
    2. 0.368 Correct answer.
    3. 0.500
    4. 0.200

    Explanation

    For an exponential distribution with mean mu, the survival probability beyond time t is e to the minus t divided by mu. With t = 5 and mu = 5 the exponent is -1, giving e^-1 = 0.368. The distribution is memoryless, so the median lifetime is less than the mean.

  37. Question 37Probability and Statistics

    Machine A produces 60% of a plant's output with a 2% defect rate, and machine B produces the remaining 40% with a 5% defect rate. A randomly chosen item is found to be defective. What is the probability that it came from machine A?

    1. 0.600
    2. 0.333
    3. 0.375 Correct answer.
    4. 0.625

    Explanation

    Bayes' theorem reverses the conditional: P(A | defective) equals the joint probability of A and defective divided by the total defect probability. The numerator is 0.6 times 0.02 = 0.012, and the total is 0.012 + 0.4 times 0.05 = 0.032. The ratio 0.012/0.032 is 0.375.

  38. Question 38Probability and Statistics

    A study plans a 95% confidence interval for a population mean with known standard deviation 10. How many observations are needed so that the margin of error is no more than 2 units?

    1. 97 Correct answer.
    2. 25
    3. 96
    4. 385

    Explanation

    The margin of error equals z times sigma divided by the square root of n, so n equals the square of z times sigma divided by the margin. Substituting gives (1.96 times 10 divided by 2) squared, which equals 96.04. Sample size must be rounded up, so 97 observations are required.

  39. Question 39Probability and Statistics

    A hypothesis test returns a p-value of 0.03 for a test conducted at the 0.05 significance level. Which statement best interprets this p-value?

    1. The alternative hypothesis is true with probability 0.97
    2. The null hypothesis should not be rejected at this significance level
    3. The null hypothesis is true with probability 0.03
    4. A result this extreme is unlikely if the null hypothesis is true Correct answer.

    Explanation

    A p-value is the probability of obtaining a test statistic at least as extreme as the observed one, computed under the assumption that the null hypothesis holds. A value of 0.03 indicates such a result would be unusual under the null, and since 0.03 is below 0.05 the null is rejected. The p-value is not the probability that either hypothesis is true.

  40. Question 40Probability and Statistics

    A least-squares regression line fitted to data is y = 12.5 + 3.2x, where x is in meters and y is in kilograms. How should the slope be interpreted?

    1. x changes by 3.2 for each unit change in y
    2. y is predicted to be 3.2 when x equals 0
    3. y rises about 3.2 on average per unit rise in x Correct answer.
    4. y changes by 12.5 for each unit change in x

    Explanation

    In a linear model the slope is the expected change in the response variable for a one-unit increase in the predictor. Here a one-meter increase in x corresponds to an average predicted increase of 3.2 kilograms in y. The constant 12.5 is the predicted value of y when x equals zero.

  41. Question 41Engineering Economics

    A company borrows $5,000 at 8% per year simple interest for 3 years. What is the total interest paid over the 3 years?

    1. $1,200 Correct answer.
    2. $1,300
    3. $1,600
    4. $2,000

    Explanation

    Simple interest is computed only on the original principal, so total interest equals principal times rate times time: $5,000 x 0.08 x 3 = $1,200. No interest is earned on accrued interest.

  42. Question 42Engineering Economics

    A machine costs $50,000, has an estimated salvage value of $5,000, and a depreciable life of 5 years. Using straight-line depreciation, what is the annual depreciation charge?

    1. $8,000
    2. $10,000
    3. $9,000 Correct answer.
    4. $11,000

    Explanation

    Straight-line depreciation spreads the depreciable basis (cost minus salvage value) evenly over the life: ($50,000 - $5,000) / 5 = $9,000 per year. Salvage value must be removed from the basis before dividing.

  43. Question 43Engineering Economics

    An equipment purchase of $24,000 is expected to produce uniform annual savings of $6,000. What is the simple payback period?

    1. 5.0 years
    2. 4.0 years Correct answer.
    3. 2.5 years
    4. 3.0 years

    Explanation

    Simple payback is the initial investment divided by the uniform annual net cash flow: $24,000 / $6,000 = 4.0 years. It ignores the time value of money and any cash flows after payback.

  44. Question 44Engineering Economics

    A bank quotes a nominal annual interest rate of 12% compounded monthly. What is the effective annual interest rate?

    1. 12.36%
    2. 12.00%
    3. 12.55%
    4. 12.68% Correct answer.

    Explanation

    The monthly rate is 12%/12 = 1%, and the effective annual rate is (1 + 0.01)^12 - 1 = 0.1268, or 12.68%. Compounding more often than annually always makes the effective rate exceed the nominal rate.

  45. Question 45Engineering Economics

    $1,000 is deposited today in an account that earns 10% per year compounded annually. What is the account balance at the end of 5 years?

    1. $1,464.10
    2. $1,610.51 Correct answer.
    3. $1,500.00
    4. $1,771.56

    Explanation

    The single-payment compound amount factor applies: F = P(1 + i)^n = $1,000(1.10)^5 = $1,610.51. The growth includes interest earned on previously accrued interest.

  46. Question 46Engineering Economics

    In engineering economic analysis, the minimum acceptable rate of return (MARR) is best described as which of the following?

    1. The minimum acceptable rate of return for a project Correct answer.
    2. The average return earned by all projects currently underway
    3. The interest rate a firm pays on short-term borrowed funds
    4. The depreciation rate allowed by the tax authority

    Explanation

    The MARR is the hurdle rate a firm sets as the least return it will accept on an investment, reflecting its cost of capital and risk. A project is economically justified only when its rate of return meets or exceeds the MARR.

  47. Question 47Engineering Economics

    A project requires an initial investment of $40,000 and returns $12,000 per year for 5 years. At a MARR of 10% per year, what is the present worth of the project?

    1. $4,120
    2. $6,850
    3. $8,310
    4. $5,490 Correct answer.

    Explanation

    Discount the uniform annual returns with the series present worth factor: PW = -$40,000 + $12,000(P/A, 10%, 5) = -$40,000 + $12,000(3.7908) = -$40,000 + $45,490 = $5,490. A positive present worth means the project earns more than the MARR.

  48. Question 48Engineering Economics

    A perpetual endowment must pay out $10,000 per year forever. If the invested fund earns 8% per year, what amount must be deposited now to fund the payments?

    1. $100,000
    2. $150,000
    3. $125,000 Correct answer.
    4. $80,000

    Explanation

    For a perpetuity, the capitalized cost equals the annual payment divided by the interest rate: $10,000 / 0.08 = $125,000. The principal is never consumed because earnings cover the payout each year.

  49. Question 49Engineering Economics

    Maintenance on a system costs $2,000 in year 1 and increases by $500 each year through year 5. At an interest rate of 10% per year, what is the present worth of the maintenance costs?

    1. $12,450
    2. $10,500
    3. $9,800
    4. $11,013 Correct answer.

    Explanation

    The cash flow is a uniform series of $2,000 plus an arithmetic gradient of $500. PW = $2,000(P/A, 10%, 5) + $500(P/G, 10%, 5) = $2,000(3.7908) + $500(6.8618) = $7,582 + $3,431 = $11,013.

  50. Question 50Engineering Economics

    An investment of $10,000 today returns $4,000 per year for 3 years. What is the internal rate of return?

    1. 8.5%
    2. 9.7% Correct answer.
    3. 12.0%
    4. 11.2%

    Explanation

    Setting PW to zero gives $10,000 = $4,000(P/A, i, 3), so the factor must equal 2.5. Since (P/A, 9%, 3) = 2.531 and (P/A, 10%, 3) = 2.487, interpolating places the rate at about 9.7%.

  51. Question 51Engineering Economics

    A public project has a present worth of benefits of $800,000 and a present worth of total costs of $650,000, with operating and maintenance costs already included in the cost figure. What is the conventional benefit-cost ratio?

    1. 0.81
    2. 1.00
    3. 1.23 Correct answer.
    4. 1.85

    Explanation

    The conventional B/C ratio divides present worth of benefits by present worth of costs when O&M is already counted as a cost: $800,000 / $650,000 = 1.23. A ratio above 1.0 indicates the project is economically acceptable.

  52. Question 52Engineering Economics

    An asset costing $80,000 is classified as 5-year MACRS property. Using the half-year convention, what is the depreciation charge in year 1?

    1. $26,667
    2. $8,000
    3. $20,000
    4. $16,000 Correct answer.

    Explanation

    The first-year MACRS rate for 5-year property is 20.00%, reflecting the half-year convention that treats the asset as placed in service midway through the year. Applying that rate gives 0.20 x $80,000 = $16,000.

  53. Question 53Engineering Economics

    An investment earns a real return of 5% per year while inflation runs at 3% per year. What is the combined market interest rate?

    1. 8.00%
    2. 8.15% Correct answer.
    3. 7.85%
    4. 2.00%

    Explanation

    The market rate combines real return and inflation multiplicatively: (1.05)(1.03) - 1 = 1.0815 - 1 = 8.15%. Simply adding 5% and 3% slightly understates the true combined rate.

  54. Question 54Engineering Economics

    A machine costs $60,000, has a salvage value of $10,000 after 6 years, and costs $8,000 per year to operate. At a MARR of 12% per year, what is the equivalent annual worth of owning and operating the machine?

    1. -$23,900
    2. -$18,500
    3. -$20,100
    4. -$21,360 Correct answer.

    Explanation

    Convert each element to an annual amount: AW = -$60,000(A/P, 12%, 6) + $10,000(A/F, 12%, 6) - $8,000 = -$14,594 + $1,232 - $8,000 = -$21,362, or about -$21,360.

  55. Question 55Engineering Economics

    An asset costing $60,000 with a $4,000 salvage value and a 5-year life is depreciated using double declining balance. What is the depreciation charge in year 1?

    1. $14,400
    2. $12,000
    3. $18,000
    4. $24,000 Correct answer.

    Explanation

    Double declining balance uses twice the straight-line rate applied to the undepreciated book value: (2/5)(100%) = 40%, so year-1 depreciation is 0.40 x $60,000 = $24,000. Salvage value does not enter the year-1 calculation because book value is still well above it.

  56. Question 56Engineering Economics

    A bond with a $1,000 face value pays coupons of 6% of face value each year and matures in 10 years. If the market interest rate is 8% per year, what is the bond's present worth today?

    1. $866 Correct answer.
    2. $920
    3. $1,134
    4. $1,000

    Explanation

    The bond's value is the present worth of the coupon series plus the present worth of the face value: $60(P/A, 8%, 10) + $1,000(P/F, 8%, 10) = $60(6.7101) + $1,000(0.4632) = $403 + $463 = $866. Because the coupon rate is below the market rate, the bond sells at a discount.

  57. Question 57Engineering Economics

    Two mutually exclusive alternatives have 5-year lives and no salvage value. Alternative A costs $20,000 and yields $6,000 per year; Alternative B costs $30,000 and yields $8,500 per year. Which should be chosen at a MARR of 10% per year?

    1. Alternative B, because it has the larger annual benefit
    2. Alternative B, because its present worth is larger
    3. Neither, because both present worths are negative
    4. Alternative A, since incremental ROR is below MARR Correct answer.

    Explanation

    Both alternatives are acceptable on their own (PW of A is about $2,745 and PW of B about $2,222), so the choice depends on the incremental investment. The extra $10,000 in B buys $2,500 per year, giving a factor of 4.0 and an incremental rate of return near 7.9%, which is below the 10% MARR, so the increment is rejected and A is chosen.

  58. Question 58Engineering Economics

    A new asset costs $100,000 and is 5-year MACRS property with a 20% first-year rate. In year 1 it produces $50,000 of revenue and requires $15,000 of cash operating costs. With an effective tax rate of 40%, what is the after-tax cash flow in year 1?

    1. $29,000 Correct answer.
    2. $21,000
    3. $35,000
    4. $26,000

    Explanation

    Taxable income is $50,000 - $15,000 - $20,000 depreciation = $15,000, so tax is $6,000. After-tax cash flow is revenue minus cash costs minus tax: $50,000 - $15,000 - $6,000 = $29,000, which also equals ($15,000)(1 - 0.40) + $20,000.

  59. Question 59Engineering Economics

    A machine costs $80,000, has a 10-year life with no salvage value, and requires $20,000 per year in operating costs expressed in today's dollars. Inflation is 4% per year and the market MARR is 12% per year. What is the equivalent annual worth in constant dollars?

    1. -$33,000
    2. -$31,760 Correct answer.
    3. -$29,400
    4. -$34,160

    Explanation

    When cash flows are stated in constant dollars, discount at the real rate: (1.12/1.04) - 1 = 7.69%. Then AW = -$80,000(A/P, 7.69%, 10) - $20,000 = -$80,000(0.1470) - $20,000 = -$31,760.

  60. Question 60Engineering Economics

    A maintenance cost is $5,000 in year 1 and increases by 6% each year through year 8. At an interest rate of 10% per year, what is the present worth of these costs?

    1. $30,000
    2. $28,500
    3. $32,060 Correct answer.
    4. $35,200

    Explanation

    This is a geometric gradient series, so PW = A1[1 - (1+g)^n(1+i)^-n]/(i - g) = $5,000[1 - (1.06/1.10)^8]/0.04 = $5,000(6.412) = $32,060. The growth rate must be handled separately from the discount rate because the two compound against each other.

  61. Question 61Ethics and Professional Practice

    During construction, an engineer learns that a structural member already installed in an occupied building may be inadequate. Making public health, safety, and welfare paramount, what is the engineer's most appropriate action?

    1. Document the concern internally and defer to the contractor's field judgment.
    2. Notify the owner promptly and recommend protective measures for the occupants. Correct answer.
    3. Keep the finding confidential to avoid alarming the building's occupants and owner.
    4. Wait until the next scheduled project meeting to raise the issue with the team.

    Explanation

    The first canon of engineering ethics is that the safety, health, and welfare of the public are held paramount, above client relations and contractual convenience. When a credible safety concern is identified in an occupied structure, the engineer must promptly inform the responsible parties and recommend protective action. Internal documentation alone does not discharge that duty.

  62. Question 62Ethics and Professional Practice

    An engineer is offered a design assignment involving a technology the engineer has never used. Under professional practice rules, the engineer may accept the assignment only if:

    1. a technician familiar with the published literature is assigned to the work
    2. the engineer first gains competence through study or a qualified associate Correct answer.
    3. the client signs a waiver releasing the engineer from later liability claims
    4. the engineer's supervisor agrees to seal all of the resulting drawings

    Explanation

    Engineers are required to perform services only in areas of their competence, which may be satisfied by education, training, or experience obtained before or during the assignment. Associating with a competent expert is an accepted way to acquire the needed capability. Liability waivers and delegation to unqualified staff do not create competence.

  63. Question 63Ethics and Professional Practice

    An engineer is asked to seal drawings produced by an unlicensed designer. The engineer may properly seal the drawings only if the design work:

    1. was done under the engineer's responsible charge and checked by the engineer Correct answer.
    2. is accompanied by the designer's written statement of professional experience
    3. was completed using the firm's own software and standard drawing templates
    4. was reviewed informally by a colleague who is also a licensed engineer

    Explanation

    A seal and signature certify that the licensee was in responsible charge of the work, meaning it was prepared under the licensee's direct supervisory control and personally reviewed. Informal review by a third party or the designer's credentials do not satisfy that requirement. The engineer who seals must be able to stand behind the technical content.

  64. Question 64Ethics and Professional Practice

    A materials supplier whose products are being evaluated sends an engineer an expensive gift during the selection process. The engineer should:

    1. accept it and note the gift in the project's final report
    2. accept it and share it with the design team to avoid favoritism
    3. decline it because it could improperly influence the decision Correct answer.
    4. accept it because gifts of this type are customary in the industry

    Explanation

    Engineers must avoid accepting anything of value from parties whose products or services they evaluate, because such gifts create an appearance of impropriety and may compromise objective judgment. Declining the gift protects both the engineer and the selection process. Later disclosure does not cure the conflict created at the time of acceptance.

  65. Question 65Ethics and Professional Practice

    An engineer who has passed the PE examination but has not yet been licensed in the jurisdiction signs a report as "P.E." This action is:

    1. acceptable if a licensed colleague co-signs the same report later
    2. improper because it misrepresents the engineer's licensure status Correct answer.
    3. acceptable if the report is for internal company use only
    4. improper only if a client suffers a financial loss from the report

    Explanation

    Use of a professional title is restricted to individuals who hold an active license in the jurisdiction; passing an examination is not licensure. Claiming the title misrepresents credentials regardless of who reads the document. The violation occurs at the moment the false designation is used, not only when harm results.

  66. Question 66Ethics and Professional Practice

    An engineer completes a design for a client and is later asked by a competitor for the client's proprietary process data. The engineer should:

    1. refuse to release the data without the client's authorization Correct answer.
    2. release the data if the competitor promises to keep it confidential
    3. release the data once the engineer's contract with the client ends
    4. release a summary of the data but withhold the detailed calculations

    Explanation

    Information obtained in a professional engagement is confidential and may not be disclosed without the client's consent or a legal requirement to do so. This duty survives completion or termination of the contract. A competitor's promise of confidentiality is not a substitute for client authorization.

  67. Question 67Ethics and Professional Practice

    A consulting engineer owns a 30 percent interest in a construction firm that is bidding on a project the engineer is designing. The engineer should:

    1. sell the interest after the bids are opened and the contract is awarded
    2. resign from the project team without explaining the reason to the client
    3. continue the work and rely on the competitive bidding process to be fair
    4. disclose the ownership interest in writing to the client before proceeding Correct answer.

    Explanation

    Engineers must disclose any business association or interest that could reasonably be seen as creating a conflict of interest, and must obtain the client's informed consent before continuing. Full written disclosure lets the client decide how to manage the conflict. Quiet resignation or a delayed sale does not give the client that opportunity.

  68. Question 68Ethics and Professional Practice

    A firm's principal signs and seals foundation drawings produced by a designer who received no technical direction and whose work the principal never checked. This conduct is:

    1. unethical because the seal asserts responsible charge that was not exercised Correct answer.
    2. acceptable if the drawings are later reviewed during construction
    3. acceptable if the client agreed in advance to the arrangement
    4. acceptable if the designer has ten years of relevant drafting experience

    Explanation

    The seal represents that the licensee directed the work and reviewed it personally; a signature on unchecked work is a false certification. Neither the designer's experience nor client consent can create the missing supervisory control. Review during construction comes too late to validate the sealed design documents.

  69. Question 69Ethics and Professional Practice

    An engineer has documented evidence that a colleague altered soil test results to make a design appear adequate. The engineer's professional obligation is to:

    1. confront the colleague privately and drop the matter if an apology follows
    2. report the matter to the appropriate authority and protect the public Correct answer.
    3. keep silent because the colleague's supervisor holds final responsibility
    4. post the evidence on a professional networking site for peer review

    Explanation

    Falsified test data is a threat to public safety and a violation of professional conduct that must be reported to the appropriate authority, such as the licensing board or the responsible client official. A private apology does not correct the corrupted design basis. Public posting is not a proper substitute for reporting through established channels.

  70. Question 70Ethics and Professional Practice

    An engineer hired as an expert witness in a lawsuit should base testimony on:

    1. the prevailing view among the engineers employed by that party
    2. the arguments that best support the party who retained the engineer
    3. the technical facts and the engineer's competent professional judgment Correct answer.
    4. the opinion of the attorney who is directing the litigation strategy

    Explanation

    Testimony must be truthful, objective, and confined to the engineer's area of competence. The expert's duty is to the facts and to the profession, not to the outcome the retaining party prefers. An advocate's role belongs to counsel, not to the engineer.

  71. Question 71Ethics and Professional Practice

    Which activity best demonstrates compliance with the expectation that engineers maintain professional competency throughout their careers?

    1. Reviewing a project's budget before signing the final invoice
    2. Attending a company social event with the design team quarterly
    3. Renewing a license each year by paying the required fee on time
    4. Completing continuing education courses in the engineer's practice areas Correct answer.

    Explanation

    Maintaining competency requires ongoing technical and professional development relevant to the engineer's field of practice, typically through continuing education. Administrative tasks and social activities do not update technical knowledge. Licensure renewal is a legal formality, not evidence of current competence.

  72. Question 72Ethics and Professional Practice

    An engineer preparing a specification finds a well-detailed proprietary connection design in a competitor's published report and copies it into the project documents without attribution or permission. The action is:

    1. acceptable because the competitor published the design in a public document
    2. acceptable because technical information has no ownership once printed
    3. improper because another's intellectual property was used without credit Correct answer.
    4. improper only if the competitor's design later proves to be inadequate

    Explanation

    Engineers must not use the proprietary work of others without permission or proper acknowledgment, and must give credit for work they rely on. Publication in a report does not transfer ownership or grant a license to reuse. The impropriety exists independent of whether the copied design performs well.

  73. Question 73Ethics and Professional Practice

    An engineer wants to perform a small outside design job on weekends. Using the employer's computer, software, and drawing files for that job without permission is:

    1. acceptable if the outside work does not compete with the employer
    2. improper because employer resources are being used without consent Correct answer.
    3. improper only if the employer discovers the use and objects
    4. acceptable if the engineer completes the work outside of office hours

    Explanation

    Employer property, software licenses, and project files may not be used for personal business without the employer's consent. The duty is breached by the unauthorized use itself, not by the timing of the work or its competitive effect. Waiting for the employer to object reverses the required permission.

  74. Question 74Ethics and Professional Practice

    An engineering firm's advertisement states that it "guarantees approval of every permit application." This statement is:

    1. misleading only if a client later receives a permit denial
    2. misleading and therefore inconsistent with professional advertising rules Correct answer.
    3. acceptable if the firm has succeeded on most similar applications
    4. acceptable because the firm intends to provide excellent service

    Explanation

    Solicitation of work must be truthful and must not create unjustified expectations about results the firm does not control. Permit approval rests with the reviewing agency, so no firm can guarantee it. Good intentions or a strong past record do not make the claim accurate.

  75. Question 75Ethics and Professional Practice

    A prime design firm retains a specialty subconsultant for a portion of a project. Responsibility for the adequacy of the subconsultant's work rests with:

    1. the subconsultant alone, once the subconsultant's contract is signed
    2. the prime firm, which remains responsible for the overall design Correct answer.
    3. the client, because the client approves the subconsultant's fees
    4. the reviewing agency, because it issues the construction permit

    Explanation

    A firm that delegates a portion of its work retains responsibility to the client for the quality and coordination of the entire deliverable. The prime must select qualified subconsultants and review their work. Contractual arrangements among the parties do not shift that duty to the client or to the permitting agency.

  76. Question 76Ethics and Professional Practice

    An engineer's manager directs the engineer to specify a lower-grade material to cut cost, even though the change would reduce the structure's safety margin below the governing code. The engineer should:

    1. refuse, explain the code concern, and escalate the issue as needed Correct answer.
    2. comply because the manager holds the seal of the firm's principal
    3. make the change and record the manager's instruction in the project file
    4. make the change and request extra inspection during construction

    Explanation

    A directive that would produce a code-deficient, unsafe design cannot be followed, regardless of who issues it or what is documented. The engineer should clearly state the technical basis for refusing and pursue the issue through higher levels of the organization or the client. Documentation alone does not make an unsafe design acceptable.

  77. Question 77Ethics and Professional Practice

    An engineer licensed in State A is hired to design a building in State B, where the engineer holds no license. The engineer must:

    1. add a note on the drawings stating the engineer's State A status
    2. notify the State A board and proceed with the design work
    3. obtain licensure in State B before practicing there Correct answer.
    4. have a State B engineer review the drawings after completion

    Explanation

    Licensure is granted by each jurisdiction, and practice affecting a project in a state generally requires a license from that state, often obtained through comity. A license from another state does not authorize practice where the work is located. Disclosure of an out-of-state license does not cure the deficiency.

  78. Question 78Ethics and Professional Practice

    A firm agrees to pay a percentage of its engineering fee to an unlicensed marketing representative for each client the representative refers. This arrangement is:

    1. improper because paying for referrals of engineering work is prohibited Correct answer.
    2. acceptable if the representative's fee is disclosed to the client
    3. improper only if the representative also prepares design documents
    4. acceptable if the representative has a degree in engineering

    Explanation

    Professional practice rules prohibit paying commissions or fees to obtain engineering work, because compensation for securing work can compromise objectivity and mislead clients about how engineers are selected. Disclosure to the client does not cure the prohibition. Whether the representative also performs design work is a separate question.

  79. Question 79Ethics and Professional Practice

    Two years after a project's completion, an engineer discovers that an error in the engineer's own structural calculations was not caught during construction. The engineer should:

    1. keep the discovery private because the project's warranty period has ended
    2. discuss the error only with the engineer's attorney and liability insurer
    3. wait to act until a failure or distress is actually observed on site
    4. inform the owner promptly and recommend the needed evaluation Correct answer.

    Explanation

    An engineer who learns of an error in completed work that may affect safety has a duty to notify the affected parties promptly and recommend corrective action. Expiration of a warranty affects contractual remedies, not the professional duty to protect the public. Waiting for physical distress to appear allows a preventable hazard to persist.

  80. Question 80Ethics and Professional Practice

    While reviewing another firm's design, an engineer believes a beam is under-designed. In communicating this view, the engineer should:

    1. raise the concern only if the other firm agrees to accept the criticism
    2. describe the other firm's engineers as incompetent in the review memo
    3. withhold the concern to avoid conflict between the two firms
    4. state the technical basis for the concern in a factual, professional manner Correct answer.

    Explanation

    Technical criticism of another engineer's work is proper when it is supported by facts and expressed professionally, and it should be shared with the parties who need it. Personal attacks on competence are unprofessional and may themselves be a violation. Avoiding valid criticism to keep peace endangers the project.

  81. Question 81Engineering Mechanics

    Two forces, 3 kN and 4 kN, act at the same point on a body and are perpendicular to each other. What is the magnitude of their resultant?

    1. 5 kN Correct answer.
    2. 1 kN
    3. 7 kN
    4. 3.5 kN

    Explanation

    For two perpendicular forces, the resultant magnitude is the square root of the sum of the squares of the components, since they form the legs of a right triangle. Here sqrt(3^2 + 4^2) = 5 kN.

  82. Question 82Engineering Mechanics

    A force of 50 N is applied perpendicular to the handle of a wrench at a distance of 0.40 m from the center of the bolt. What is the magnitude of the moment about the bolt?

    1. 50 N·m
    2. 20 N·m Correct answer.
    3. 125 N·m
    4. 0.008 N·m

    Explanation

    The moment of a force about a point equals the force multiplied by the perpendicular distance from the point to the line of action. With M = Fd = 50 N × 0.40 m, the moment is 20 N·m.

  83. Question 83Engineering Mechanics

    A uniform beam 6 m long weighs 300 N and is supported at each end. A 600 N load hangs at the midspan. What is the vertical reaction at each support?

    1. 450 N Correct answer.
    2. 300 N
    3. 600 N
    4. 900 N

    Explanation

    The total downward load is the beam weight plus the applied load, 300 N + 600 N = 900 N. Because both the beam weight and the load act at midspan, the system is symmetric, so each support carries half the total, 450 N.

  84. Question 84Engineering Mechanics

    A particle starts from rest and moves in a straight line with a constant acceleration of 3 m/s² for 4 s. What is its speed at the end of this interval?

    1. 7.0 m/s
    2. 12 m/s Correct answer.
    3. 48 m/s
    4. 0.75 m/s

    Explanation

    For constant acceleration starting from rest, the speed is v = at. Substituting a = 3 m/s² and t = 4 s gives v = 12 m/s.

  85. Question 85Engineering Mechanics

    A net horizontal force of 20 N acts on a 5 kg block resting on a frictionless horizontal surface. What is the magnitude of the block's acceleration?

    1. 0.25 m/s²
    2. 4.0 m/s² Correct answer.
    3. 100 m/s²
    4. 25 m/s²

    Explanation

    Newton's second law states that the net force equals mass times acceleration, so a = F/m. Dividing 20 N by 5 kg gives 4.0 m/s².

  86. Question 86Engineering Mechanics

    A block weighing 100 N rests on a horizontal floor. The coefficient of static friction between the block and the floor is 0.30. What is the minimum horizontal force required to start the block sliding?

    1. 300 N
    2. 30 N Correct answer.
    3. 70 N
    4. 333 N

    Explanation

    On a horizontal surface the normal force equals the block's weight, 100 N. The maximum static friction is μsN = 0.30 × 100 N = 30 N, so a slightly larger applied force is needed to initiate motion.

  87. Question 87Engineering Mechanics

    A truss joint is formed by two members that meet at 90°, each inclined at 45° to the vertical. A downward vertical load of 10 kN is applied at the joint. Neglecting member weights, what is the magnitude of the force in each member?

    1. 7.07 kN Correct answer.
    2. 14.1 kN
    3. 10.0 kN
    4. 5.00 kN

    Explanation

    By symmetry each member carries half of the vertical load, so the vertical component in each is 5 kN. Since the member axis is at 45° to the vertical, F sin 45° = 5 kN, giving F = 7.07 kN, and the members are in compression.

  88. Question 88Engineering Mechanics

    A projectile is launched from level ground with an initial speed of 20 m/s at 30° above the horizontal. Neglecting air resistance and using g = 9.81 m/s², what horizontal distance does it travel before returning to ground level?

    1. 40.8 m
    2. 17.7 m
    3. 20.4 m
    4. 35.3 m Correct answer.

    Explanation

    For level ground the range is R = v₀² sin(2θ)/g. With v₀ = 20 m/s and 2θ = 60°, R = (400 × 0.866)/9.81 = 35.3 m.

  89. Question 89Engineering Mechanics

    A plane area has a centroidal moment of inertia of 2.0×10^6 mm^4 and an area of 500 mm². What is its moment of inertia about a parallel axis located 100 mm from the centroidal axis?

    1. 2.5×10^6 mm^4
    2. 2.0×10^6 mm^4
    3. 7.0×10^6 mm^4 Correct answer.
    4. 5.2×10^6 mm^4

    Explanation

    The parallel-axis theorem gives I = Ī + Ad², where Ī is the centroidal moment of inertia. The transfer term is 500 mm² × (100 mm)² = 5.0×10^6 mm^4, so I = 2.0×10^6 + 5.0×10^6 = 7.0×10^6 mm^4.

  90. Question 90Engineering Mechanics

    A block is released from rest and slides down a frictionless incline whose vertical height is 5.0 m. Using g = 9.81 m/s², what is its speed at the bottom of the incline?

    1. 14 m/s
    2. 49 m/s
    3. 7.0 m/s
    4. 9.9 m/s Correct answer.

    Explanation

    Conservation of energy for a frictionless surface gives ½mv² = mgh, so v = sqrt(2gh). Thus v = sqrt(2 × 9.81 × 5.0) = 9.9 m/s, independent of the incline angle.

  91. Question 91Engineering Mechanics

    A 0.20 kg ball moving horizontally at 15 m/s is struck and rebounds along the same line at 25 m/s in the opposite direction. What is the magnitude of the impulse delivered to the ball?

    1. 8.0 N·s Correct answer.
    2. 5.0 N·s
    3. 3.0 N·s
    4. 2.0 N·s

    Explanation

    Impulse equals the change in linear momentum, J = m(v₂ − v₁), and the velocity reversal means the change is 25 + 15 = 40 m/s in magnitude. Multiplying by 0.20 kg gives 8.0 N·s.

  92. Question 92Engineering Mechanics

    An automobile travels on a flat, unbanked circular curve of radius 50 m. If the coefficient of static friction between the tires and the road is 0.60 and g = 9.81 m/s², what is the maximum speed at which the car can negotiate the curve without skidding?

    1. 29.4 m/s
    2. 17.2 m/s Correct answer.
    3. 8.6 m/s
    4. 24.2 m/s

    Explanation

    On an unbanked curve, static friction supplies the centripetal force, so μsmg = mv²/r, giving v = sqrt(μsgr). Substituting yields v = sqrt(0.60 × 9.81 × 50) = 17.2 m/s.

  93. Question 93Engineering Mechanics

    A flywheel with a mass moment of inertia of 4.0 kg·m² about its axis of rotation is subjected to a net torque of 12 N·m. What is the angular acceleration of the flywheel?

    1. 0.33 rad/s²
    2. 48 rad/s²
    3. 3.0 rad/s² Correct answer.
    4. 12 rad/s²

    Explanation

    For rotation about a fixed axis, the equation of motion is ΣM = Iα. Solving gives α = 12 N·m / 4.0 kg·m² = 3.0 rad/s².

  94. Question 94Engineering Mechanics

    In a pin-connected frame, member AB has pins at both ends and carries no loads between its ends. The member is in equilibrium. In what direction does the force it exerts on the adjoining member act?

    1. Along the pin-to-pin axis Correct answer.
    2. The member carries no force
    3. Perpendicular to that axis
    4. At 30° to that axis

    Explanation

    A member loaded only at two points and in equilibrium is a two-force member, so the forces at its ends must be equal, opposite, and collinear. The line of action is therefore the line joining the two pins.

  95. Question 95Engineering Mechanics

    A block rests on an adjustable incline. The coefficient of static friction between the block and the incline is 0.40. At what incline angle does the block begin to slide?

    1. 15.0°
    2. 40.0°
    3. 21.8° Correct answer.
    4. 66.4°

    Explanation

    Sliding impends when the component of weight along the incline, mg sin θ, equals the maximum static friction, μs mg cos θ. This gives tan θ = μs, so θ = arctan(0.40) = 21.8°.

  96. Question 96Engineering Mechanics

    A semicircular area has a radius of 30 mm. What is the distance from its diameter to its centroid?

    1. 30.0 mm
    2. 10.0 mm
    3. 15.0 mm
    4. 12.7 mm Correct answer.

    Explanation

    For a semicircular area the centroid lies on the axis of symmetry at a distance of 4r/(3π) from the diameter. With r = 30 mm this gives 120/(3π) = 12.7 mm.

  97. Question 97Engineering Mechanics

    Two blocks of mass 6 kg and 4 kg hang from a light string passing over a pulley of moment of inertia 0.20 kg·m² and radius 0.10 m. The pulley rotates on a frictionless bearing and the string does not slip. Using g = 9.81 m/s², what is the acceleration of the blocks?

    1. 0.981 m/s²
    2. 1.96 m/s²
    3. 1.31 m/s²
    4. 0.654 m/s² Correct answer.

    Explanation

    Applying Newton's second law to both blocks and the rotating pulley gives a = (m₁ − m₂)g / (m₁ + m₂ + I/r²). The inertia term is 0.20/0.10² = 20 kg, so a = (2 × 9.81)/30 = 0.654 m/s².

  98. Question 98Engineering Mechanics

    A 20 kg crate starts from rest and slides 5.0 m down a 30° incline. The coefficient of kinetic friction is 0.25 and g = 9.81 m/s². What is the crate's speed after sliding the 5.0 m?

    1. 5.27 m/s Correct answer.
    2. 7.00 m/s
    3. 4.43 m/s
    4. 6.34 m/s

    Explanation

    The drop in height is 5.0 sin 30° = 2.5 m, so the potential energy released is 490.5 J. Friction removes μk mg cos 30° × 5.0 = 212.4 J, leaving 278.1 J of kinetic energy, hence v = sqrt(2 × 278.1/20) = 5.27 m/s.

  99. Question 99Engineering Mechanics

    A 4 kg block sliding at 6 m/s on a frictionless surface collides with a stationary 2 kg block, and the two stick together. How much kinetic energy is lost in the collision?

    1. 72 J
    2. 48 J
    3. 12 J
    4. 24 J Correct answer.

    Explanation

    Conservation of momentum gives v = (4 × 6)/(4 + 2) = 4 m/s after the perfectly inelastic collision. The initial kinetic energy is 72 J and the final is ½ × 6 × 4² = 48 J, so 24 J is lost.

  100. Question 100Engineering Mechanics

    A slender uniform rod of mass 3 kg and length 2 m is pivoted at one end and released from rest in a horizontal position. Using g = 9.81 m/s², what is its angular acceleration at the instant of release?

    1. 7.36 rad/s² Correct answer.
    2. 4.91 rad/s²
    3. 2.45 rad/s²
    4. 14.7 rad/s²

    Explanation

    At release the only moment about the pivot comes from weight acting at the rod's center, M = mg(L/2) = 3 × 9.81 × 1 = 29.43 N·m. With I = mL²/3 = 4.0 kg·m² for a rod about its end, α = M/I = 7.36 rad/s².

  101. Question 101Materials Science

    The atomic packing factor (APF) of the face-centered cubic (FCC) crystal structure is:

    1. 0.74 Correct answer.
    2. 0.68
    3. 0.52
    4. 0.34

    Explanation

    FCC has four atoms per unit cell and atoms touch along the face diagonal, giving a=4R/√2. Dividing the atom volume by the unit-cell volume yields an APF of 0.74, the maximum value achievable with spheres of equal size (also reached by HCP).

  102. Question 102Materials Science

    How many atoms are effectively contained within one body-centered cubic (BCC) unit cell?

    1. 1
    2. 8
    3. 4
    4. 2 Correct answer.

    Explanation

    A BCC cell has one atom at each of its eight corners and one atom at the body center. Each corner atom is shared by eight cells, so the count is 8(1/8) + 1 = 2 atoms per cell.

  103. Question 103Materials Science

    In crystalline solids, an edge dislocation is best classified as which type of defect?

    1. A line defect Correct answer.
    2. A point defect
    3. A planar defect
    4. A volume defect

    Explanation

    An edge dislocation is the termination of an extra half-plane of atoms, so its disregistry extends along a line (the dislocation line) through the crystal. Point defects are zero-dimensional, planar defects such as grain boundaries are two-dimensional, and volume defects are three-dimensional.

  104. Question 104Materials Science

    On a tensile engineering stress–strain curve, Young's modulus is obtained from the slope of the:

    1. post-necking region
    2. strain-hardening region
    3. linear elastic region Correct answer.
    4. toe region near the origin

    Explanation

    Young's modulus is the constant of proportionality between stress and strain in the linear elastic portion of the curve, so it equals the slope of that straight segment. The toe region reflects specimen seating and take-up of slack and must not be used.

  105. Question 105Materials Science

    The percent elongation measured at fracture in a tension test is used as a measure of a metal's:

    1. Creep resistance
    2. Ductility Correct answer.
    3. Hardness
    4. Toughness

    Explanation

    Percent elongation (together with percent reduction in area) quantifies how much plastic strain a material sustains before fracture, which is the definition of ductility. Toughness combines strength and ductility and requires energy absorption, not just strain.

  106. Question 106Materials Science

    In the iron–carbon system, an alloy is conventionally classified as cast iron rather than steel when its carbon content exceeds approximately:

    1. 4.3 wt% C
    2. 6.7 wt% C
    3. 2.1 wt% C Correct answer.
    4. 0.8 wt% C

    Explanation

    Steels are Fe–C alloys with up to about 2.1 wt% C, the maximum solubility of carbon in austenite; beyond that the alloy is cast iron. Cast irons typically contain 2.5–4 wt% C and often free graphite.

  107. Question 107Materials Science

    Copper has an FCC structure with a lattice parameter of 0.361 nm and an atomic weight of 63.55 g/mol. Its theoretical density is closest to:

    1. 4.49 g/cm³
    2. 8.97 g/cm³ Correct answer.
    3. 2.24 g/cm³
    4. 17.9 g/cm³

    Explanation

    Theoretical density is ρ = nA/(V_c N_A), where n = 4 atoms per FCC cell and V_c = (3.61×10⁻⁸ cm)³ = 4.71×10⁻²³ cm³. This gives ρ = (4)(63.55)/[(4.71×10⁻²³)(6.022×10²³)] ≈ 8.97 g/cm³, matching the handbook value for copper.

  108. Question 108Materials Science

    During a tensile test of a ductile metal, which event occurs at the point of maximum engineering stress?

    1. The specimen begins to deform elastically
    2. The true stress equals the engineering stress
    3. The true stress begins to decrease
    4. The engineering stress reaches its maximum as necking begins Correct answer.

    Explanation

    The engineering stress peaks at the ultimate tensile strength because the load-carrying capacity starts to fall once a neck forms. The true stress, computed from the instantaneous area, continues to rise until fracture.

  109. Question 109Materials Science

    An alloy of overall composition 30 wt% B lies in a two-phase region where the tie-line ends are at 15 wt% B and 60 wt% B. The mass fraction of the 60 wt% B phase is:

    1. 0.25
    2. 0.50
    3. 0.33 Correct answer.
    4. 0.67

    Explanation

    The lever rule gives the fraction of the phase on the opposite side of the overall composition: W = (30 − 15)/(60 − 15) = 15/45 = 0.33. The remaining 0.67 is the fraction of the 15 wt% B phase.

  110. Question 110Materials Science

    According to the Hall–Petch relationship, refining the grain size of a polycrystalline metal:

    1. Decreases the yield strength
    2. Leaves the yield strength unchanged
    3. Increases ductility without affecting strength
    4. Increases the yield strength Correct answer.

    Explanation

    Hall–Petch states σ_y = σ₀ + k d^(−1/2), so yield strength rises as grain diameter d decreases. More grain boundary area per unit volume impedes dislocation motion and pile-ups, raising the stress needed for yielding.

  111. Question 111Materials Science

    For a steel component in cyclic service, the fatigue endurance limit is best described as:

    1. The stress at which the first fatigue crack nucleates
    2. The stress amplitude below which fatigue life is unlimited Correct answer.
    3. The stress causing failure after a few thousand cycles
    4. The maximum stress endured in a single load cycle

    Explanation

    Below the endurance (fatigue) limit, an S–N curve becomes horizontal, so the material survives an indefinitely large number of cycles. Steels commonly show a true endurance limit, whereas many aluminum alloys do not.

  112. Question 112Materials Science

    A zinc fitting is coupled to a copper pipe in seawater. Which metal corrodes, and why?

    1. Zinc, because it is protected by the copper
    2. Copper, because it has the higher electrode potential
    3. Copper, because it is the cathodic member
    4. Zinc, because it has the lower electrode potential and is oxidized Correct answer.

    Explanation

    In a galvanic couple the metal with the more negative standard electrode potential (zinc, about −0.76 V vs. copper, about +0.34 V) becomes the anode and is oxidized. The anode corrodes while the cathode is protected, which is the basis of sacrificial anodes.

  113. Question 113Materials Science

    An amorphous thermoplastic polymer is heated to well above its glass transition temperature. Its behavior is best described as:

    1. Brittle and glassy
    2. Chemically cross-linked
    3. Fully crystalline
    4. Rubbery and compliant Correct answer.

    Explanation

    Above Tg, secondary bonding between chains weakens and segments can move cooperatively, so an amorphous thermoplastic becomes rubbery or leathery before flowing as a melt. Below Tg the same material is rigid and glassy.

  114. Question 114Materials Science

    Substitutional solute atoms that differ in atomic size from the host strengthen a metal primarily by:

    1. Enlarging the average grain size
    2. Local strain fields that impede dislocations Correct answer.
    3. Removing grain boundaries from the lattice
    4. Eliminating vacancies from the crystal

    Explanation

    Misfitting solute atoms create local tensile or compressive strain fields that interact with the strain field of a dislocation, pinning it and raising the stress needed to move it. This is solid-solution strengthening.

  115. Question 115Materials Science

    Creep becomes significant in most metals when the service temperature exceeds roughly:

    1. 0.2 Tm
    2. 0.4 Tm Correct answer.
    3. 1.0 Tm
    4. 0.1 Tm

    Explanation

    Creep is diffusion-controlled and becomes measurable above about 0.4 of the absolute melting temperature, where vacancy diffusion and dislocation climb are active. Below that homologous temperature, time-dependent deformation is usually negligible.

  116. Question 116Materials Science

    Ceramics typically fracture in a brittle manner at room temperature mainly because:

    1. Dislocation motion is restricted, so stress concentrates at flaws Correct answer.
    2. They contain no grain boundaries to blunt cracks
    3. They deform by easy dislocation glide under load
    4. They have low melting temperatures and soft lattices

    Explanation

    Ionic and covalent bonding in ceramics makes dislocation glide difficult, so plastic deformation cannot relieve stress concentrations at flaws. When the local stress intensity at a pore or microcrack exceeds the fracture toughness, the crack propagates catastrophically.

  117. Question 117Materials Science

    A steel plate with fracture toughness K_Ic = 50 MPa·m^(1/2) is loaded to 200 MPa in tension with a geometry factor Y = 1.0. The critical edge-crack depth for fast fracture is closest to:

    1. 20 mm Correct answer.
    2. 40 mm
    3. 5 mm
    4. 2 mm

    Explanation

    Setting K_Ic = Yσ√(πa) and solving gives a = (1/π)(K_Ic/(Yσ))² = (1/π)(50/200)² = 0.0199 m, about 20 mm. Cracks shorter than this value do not produce enough stress intensity to propagate at the applied stress.

  118. Question 118Materials Science

    The maximum possible Schmid factor for slip in a single crystal loaded in uniaxial tension is:

    1. 0.71
    2. 0.50 Correct answer.
    3. 0.25
    4. 1.00

    Explanation

    The resolved shear stress is τ = σ cosφ cosλ, and the product of the cosines is maximized when both angles are 45°, giving 0.5. Hence the resolved shear stress can never exceed half the applied tensile stress.

  119. Question 119Materials Science

    For a diffusion-controlled process, holding a specimen at temperature four times as long (all else unchanged) increases the characteristic diffusion distance by a factor of approximately:

    1. 4.0
    2. 2.0
    3. 1.4 Correct answer.
    4. 1.0

    Explanation

    Diffusion distance scales with the square root of time, x ≈ √(Dt). Quadrupling t multiplies x by √4 = 2? No - multiplying time by 4 gives √4 = 2.

  120. Question 120Materials Science

    In the Fe–Fe3C phase diagram, pearlite forms on cooling austenite at the eutectoid point, which is located at approximately:

    1. 4.3 wt% C and 1147 °C
    2. 0.76 wt% C and 727 °C Correct answer.
    3. 0.76 wt% C and 1147 °C
    4. 0.02 wt% C and 727 °C

    Explanation

    The eutectoid reaction γ → α + Fe3C occurs at 727 °C and 0.76 wt% C, producing the lamellar two-phase microstructure called pearlite. The 1147 °C reactions involve the eutectic (4.3 wt% C) and the maximum austenite carbon solubility (2.14 wt% C).

  121. Question 121Fluid Mechanics

    A liquid has a specific gravity of 1.25. What is its density? (Take the density of water as 1000 kg/m³.)

    1. 125 kg/m³
    2. 1250 kg/m³ Correct answer.
    3. 1025 kg/m³
    4. 1.25 kg/m³

    Explanation

    Specific gravity is defined as the ratio of a fluid's density to the density of water, so density equals specific gravity multiplied by 1000 kg/m³. Here 1.25 × 1000 kg/m³ = 1250 kg/m³.

  122. Question 122Fluid Mechanics

    A Newtonian oil of dynamic viscosity 0.5 Pa·s fills the gap between two large parallel plates. If the velocity gradient in the oil is 20 s⁻¹, what is the shear stress on the plates?

    1. 0.5 Pa
    2. 40 Pa
    3. 0.025 Pa
    4. 10 Pa Correct answer.

    Explanation

    For a Newtonian fluid the shear stress is the dynamic viscosity times the velocity gradient, τ = μ(du/dy). Substituting μ = 0.5 Pa·s and du/dy = 20 s⁻¹ gives τ = 10 Pa.

  123. Question 123Fluid Mechanics

    Clean water at 20 °C (surface tension 0.0728 N/m, contact angle assumed zero) rises in a vertical glass tube of 1.0 mm inside diameter. What is the capillary rise height?

    1. 14.9 mm
    2. 2.97 mm
    3. 29.7 mm Correct answer.
    4. 59.4 mm

    Explanation

    Capillary rise is h = 2σcosθ/(ρgr), where r is the tube radius, not the diameter. With r = 0.5 mm, h = 2(0.0728)/[(1000)(9.81)(0.0005)] ≈ 0.0297 m = 29.7 mm.

  124. Question 124Fluid Mechanics

    A mercury manometer (relative density 13.6) is connected to a water pipe and shows a column deflection of 200 mm. What gauge pressure does this represent in the pipe?

    1. 13.6 kPa
    2. 26.7 kPa Correct answer.
    3. 1.96 kPa
    4. 20.0 kPa

    Explanation

    The manometer deflection balances the pressure through p = ρ_Hg g h, with h the mercury column height. Using ρ = 13,600 kg/m³ gives p = 13,600 × 9.81 × 0.200 ≈ 26,700 Pa, or about 26.7 kPa.

  125. Question 125Fluid Mechanics

    A solid block floats in still water with 60 percent of its volume below the free surface. What is the specific gravity of the block?

    1. 0.40
    2. 1.67
    3. 0.67
    4. 0.60 Correct answer.

    Explanation

    For a floating body, the weight equals the weight of the displaced fluid, so the specific gravity of the body equals the fraction of its volume that is submerged. Thus the specific gravity is 0.60.

  126. Question 126Fluid Mechanics

    Water flows at 1.5 m/s through a 200 mm diameter pipe that gradually reduces to 100 mm diameter. What is the average velocity in the smaller section?

    1. 3.0 m/s
    2. 0.375 m/s
    3. 6.0 m/s Correct answer.
    4. 12.0 m/s

    Explanation

    For steady incompressible flow, continuity gives A₁V₁ = A₂V₂, so velocity scales with the inverse square of diameter. Since the diameter halves, the area falls by a factor of four and the velocity becomes 4 × 1.5 = 6.0 m/s.

  127. Question 127Fluid Mechanics

    Water flows in a horizontal pipe at 2 m/s where the pressure is 200 kPa. At a downstream section the velocity is 5 m/s. Neglecting losses, what is the pressure at the downstream section? (ρ = 1000 kg/m³.)

    1. 210.5 kPa
    2. 189.5 kPa Correct answer.
    3. 195.5 kPa
    4. 179.0 kPa

    Explanation

    Bernoulli's equation along a horizontal streamline gives p₂ = p₁ − ½ρ(V₂² − V₁²). Substituting the values gives 200,000 − 500(25 − 4) = 189,500 Pa, or 189.5 kPa.

  128. Question 128Fluid Mechanics

    A Pitot-static tube placed in a water stream measures a stagnation pressure difference of 20 kPa. What is the stream velocity? (ρ = 1000 kg/m³.)

    1. 4.47 m/s
    2. 6.32 m/s Correct answer.
    3. 40.0 m/s
    4. 20.0 m/s

    Explanation

    The stagnation pressure rise equals the dynamic pressure, Δp = ½ρV², so V = √(2Δp/ρ). Substituting gives V = √(2 × 20,000/1000) = √40 ≈ 6.32 m/s.

  129. Question 129Fluid Mechanics

    Water flows at 0.10 m³/s through a horizontal 90° reducing bend that turns the flow from a 200 mm diameter inlet to a 100 mm diameter outlet discharging to atmosphere. The inlet gauge pressure is 50 kPa. What is the magnitude of the force the water exerts on the bend in the direction of the incoming flow?

    1. 1.57 kN
    2. 1.89 kN Correct answer.
    3. 0.32 kN
    4. 3.18 kN

    Explanation

    The inlet velocity is 3.18 m/s and the outlet velocity is 12.7 m/s. Applying the momentum equation along the inlet direction, the force on the bend is p₁A₁ + ρQV₁ = (50,000)(0.0314) + (1000)(0.10)(3.18) ≈ 1571 + 318 ≈ 1.89 kN.

  130. Question 130Fluid Mechanics

    Water at 20 °C (kinematic viscosity 1.0 × 10⁻⁶ m²/s) flows at 1.0 m/s through a 50 mm diameter pipe. What is the Reynolds number?

    1. 5.0 × 10³
    2. 2.0 × 10⁴
    3. 5.0 × 10⁴ Correct answer.
    4. 5.0 × 10²

    Explanation

    The Reynolds number is Re = VD/ν. Substituting V = 1.0 m/s, D = 0.05 m, and ν = 1.0 × 10⁻⁶ m²/s gives Re = 50,000, so the flow is turbulent.

  131. Question 131Fluid Mechanics

    Water flows at 2 m/s through a 100 m long, 100 mm diameter pipe with Darcy friction factor 0.02. What is the friction head loss?

    1. 4.08 m Correct answer.
    2. 2.04 m
    3. 0.41 m
    4. 8.16 m

    Explanation

    Darcy-Weisbach gives h_f = f(L/D)(V²/2g). Substituting f = 0.02, L/D = 1000, and V²/2g = 4/19.62 = 0.204 m yields h_f ≈ 4.08 m.

  132. Question 132Fluid Mechanics

    A valve with a loss coefficient of 2.0 carries water at 3 m/s. What is the minor head loss across the valve?

    1. 0.92 m Correct answer.
    2. 1.83 m
    3. 0.46 m
    4. 3.00 m

    Explanation

    Minor losses are computed from h_m = K(V²/2g). With K = 2.0 and V²/2g = 9/19.62 = 0.459 m, the head loss is about 0.92 m.

  133. Question 133Fluid Mechanics

    Oil of dynamic viscosity 0.10 Pa·s flows in laminar, fully developed flow through a 20 mm diameter horizontal pipe 10 m long under a pressure drop of 8000 Pa. What is the discharge?

    1. 3.14 × 10⁻⁵ m³/s Correct answer.
    2. 3.14 × 10⁻⁶ m³/s
    3. 1.57 × 10⁻⁵ m³/s
    4. 3.14 × 10⁻⁴ m³/s

    Explanation

    Hagen-Poiseuille flow gives Q = πD⁴Δp/(128μL). Substituting D = 0.02 m, Δp = 8000 Pa, μ = 0.10 Pa·s, and L = 10 m gives Q ≈ 3.14 × 10⁻⁵ m³/s.

  134. Question 134Fluid Mechanics

    Two long pipes of the same length and roughness are connected in parallel between two reservoirs, one with 100 mm diameter and the other with 200 mm diameter. Assuming the same friction factor in both, what is the ratio of the discharge in the larger pipe to that in the smaller pipe?

    1. 8.00
    2. 2.00
    3. 5.66 Correct answer.
    4. 4.00

    Explanation

    Pipes in parallel have equal head loss, and with Darcy-Weisbach h_f ∝ fLV²/D, so V ∝ √D. Since Q = VA ∝ D²√D = D^2.5, the ratio is 2^2.5 ≈ 5.66.

  135. Question 135Fluid Mechanics

    A pump delivers 0.02 m³/s of water against a total head of 30 m with an overall efficiency of 75 percent. What shaft power is required? (ρ = 1000 kg/m³.)

    1. 7.85 kW Correct answer.
    2. 3.92 kW
    3. 10.5 kW
    4. 5.89 kW

    Explanation

    The water power is ρgQH, and the shaft power is that value divided by the efficiency. Thus P = (1000)(9.81)(0.02)(30)/0.75 ≈ 7850 W, or about 7.85 kW.

  136. Question 136Fluid Mechanics

    A rectangular channel 3 m wide carries water at a depth of 1.2 m on a slope of 0.001 with Manning n = 0.013. What is the discharge?

    1. 4.45 m³/s
    2. 6.68 m³/s Correct answer.
    3. 3.34 m³/s
    4. 8.90 m³/s

    Explanation

    For a rectangular section, A = 3.6 m² and P = 3 + 2(1.2) = 5.4 m, giving R = 0.667 m. Manning's equation Q = (A/n)R^(2/3)S^(1/2) then gives Q ≈ (3.6/0.013)(0.763)(0.0316) ≈ 6.68 m³/s.

  137. Question 137Fluid Mechanics

    Water flows at 2 m/s in a rectangular channel at a depth of 1.5 m. How is the flow classified?

    1. Supercritical flow
    2. Uniform flow
    3. Subcritical flow Correct answer.
    4. Critical flow

    Explanation

    The Froude number is Fr = V/√(gy) = 2/√(9.81 × 1.5) ≈ 0.52. Because Fr is less than 1, gravity waves travel faster than the flow and the flow is subcritical.

  138. Question 138Fluid Mechanics

    A 1:25 scale model of an open channel with a free surface is to be tested in the laboratory. Which similarity criterion must be satisfied so that model and prototype flows correspond?

    1. Froude number Correct answer.
    2. Euler number
    3. Mach number
    4. Reynolds number

    Explanation

    Free-surface flows are dominated by the balance between inertial and gravity forces, so geometric and dynamic similarity require equal Froude numbers. Reynolds similarity governs viscous-dominated internal flows and Mach similarity governs compressible flows.

  139. Question 139Fluid Mechanics

    Water at 4 m/s flows parallel to both sides of a smooth flat plate 2 m wide and 3 m long. If the average drag coefficient based on the wetted area is 0.005, what total drag force acts on the plate? (ρ = 1000 kg/m³.)

    1. 480 N Correct answer.
    2. 960 N
    3. 120 N
    4. 240 N

    Explanation

    Drag is F = ½ρV²C_D A, with A the total wetted area, which is 2 × (2 × 3) = 12 m² for both sides. Thus F = 0.5(1000)(16)(0.005)(12) = 480 N.

  140. Question 140Fluid Mechanics

    Water discharges through a 50 mm diameter sharp-edged orifice under a constant head of 3 m. If the discharge coefficient is 0.62, what is the flow rate?

    1. 12.0 L/s
    2. 5.79 L/s
    3. 15.1 L/s
    4. 9.34 L/s Correct answer.

    Explanation

    The orifice equation is Q = C_d A√(2gh), with A = π(0.025)² = 1.96 × 10⁻³ m² and √(2gh) = 7.67 m/s. This gives Q ≈ 0.62 × 1.96 × 10⁻³ × 7.67 ≈ 9.3 × 10⁻³ m³/s, or about 9.34 L/s.

  141. Question 141Thermodynamics

    A closed system receives 50 kJ of heat from its surroundings and performs 20 kJ of boundary work on the surroundings. What is the change in the internal energy of the system?

    1. 70 kJ decrease
    2. 30 kJ decrease
    3. 30 kJ increase Correct answer.
    4. 70 kJ increase

    Explanation

    The closed-system energy balance is ΔU = Q − W, with Q taken positive into the system and W positive out of the system. Substituting gives ΔU = 50 − 20 = 30 kJ, and the positive sign means the internal energy rises.

  142. Question 142Thermodynamics

    For an ideal gas with constant specific heats, which relation correctly links the specific heats at constant pressure and constant volume?

    1. cp / cv = R
    2. cp + cv = R
    3. cp · cv = R
    4. cp − cv = R Correct answer.

    Explanation

    The difference between the constant-pressure and constant-volume specific heats of an ideal gas equals its gas constant, cp − cv = R. This follows from the extra flow work an ideal gas performs when heated at constant pressure.

  143. Question 143Thermodynamics

    According to the Kelvin–Planck statement of the second law, which device is impossible to build?

    1. One that uses a working fluid that undergoes a phase change
    2. One that exchanges heat at a single temperature and produces no net work
    3. One that produces net work in a cycle using heat from one reservoir Correct answer.
    4. One that rejects heat to a low-temperature reservoir while producing work

    Explanation

    The Kelvin–Planck statement forbids any device operating in a cycle that receives heat from a single reservoir and delivers a net amount of work. Some heat must always be rejected to a lower-temperature sink, so a one-reservoir cyclic engine is impossible.

  144. Question 144Thermodynamics

    How is the quality x of a saturated liquid–vapor mixture defined?

    1. Total mass divided by total volume
    2. Mass of vapor divided by total mass Correct answer.
    3. Mass of liquid divided by total mass
    4. Volume of vapor divided by total volume

    Explanation

    Quality is a mass-based ratio: the mass of saturated vapor in the mixture divided by the total mass of the mixture. It ranges from 0 at saturated liquid to 1 at saturated vapor and is used to weight the saturated property values.

  145. Question 145Thermodynamics

    A Carnot heat engine operates between a source at 600 K and a sink at 300 K. What is its thermal efficiency?

    1. 100%
    2. 50% Correct answer.
    3. 67%
    4. 33%

    Explanation

    The Carnot efficiency depends only on the absolute reservoir temperatures through η = 1 − T_L/T_H. Here η = 1 − 300/600 = 0.50, or 50 percent.

  146. Question 146Thermodynamics

    For an ideal gas with constant specific heats undergoing an isentropic process, which relation is correct?

    1. P/T = constant
    2. Pv = constant
    3. Pv^k = constant Correct answer.
    4. Tv^k = constant

    Explanation

    Combining the ideal gas relation with the constant-entropy condition gives Pv^k = constant, where k = cp/cv. Equivalent forms are Tv^(k−1) = constant and T/P^((k−1)/k) = constant.

  147. Question 147Thermodynamics

    A rigid tank holds 2 kg of a saturated liquid–vapor water mixture with quality 0.25. If v_f = 0.001 m³/kg and v_g = 0.1 m³/kg, what is the tank volume?

    1. 0.0258 m³
    2. 0.0129 m³
    3. 0.200 m³
    4. 0.0515 m³ Correct answer.

    Explanation

    The mixture specific volume is v = v_f + x(v_g − v_f) = 0.001 + 0.25(0.099) = 0.02575 m³/kg. Multiplying by the 2 kg mass gives V = 0.0515 m³.

  148. Question 148Thermodynamics

    Air flows steadily through an adiabatic nozzle, and changes in potential energy are negligible. Which statement describes the energy balance?

    1. The pressure rise equals the kinetic energy increase per unit mass.
    2. The enthalpy remains constant because the nozzle is adiabatic.
    3. Enthalpy increases as the velocity of the air increases.
    4. Enthalpy drop equals kinetic energy rise per unit mass. Correct answer.

    Explanation

    For an adiabatic nozzle with no work and negligible potential energy change, the steady-flow energy equation reduces to h1 + V1²/2 = h2 + V2²/2. Any increase in kinetic energy is therefore supplied by a corresponding decrease in enthalpy.

  149. Question 149Thermodynamics

    A refrigerant flows steadily through an adiabatic capillary tube with negligible changes in kinetic and potential energy. Which property remains essentially constant across the device?

    1. Entropy
    2. Enthalpy Correct answer.
    3. Quality
    4. Pressure

    Explanation

    For an adiabatic throttling process with no work and negligible kinetic and potential energy changes, the steady-flow energy equation reduces to h1 = h2. Pressure drops and entropy rises, so enthalpy is the conserved property.

  150. Question 150Thermodynamics

    For any process occurring within an isolated system, what happens to the total entropy?

    1. It always decreases.
    2. It increases only for reversible processes.
    3. It always remains constant.
    4. It never decreases. Correct answer.

    Explanation

    The second law requires the entropy of an isolated system to increase for irreversible processes and remain unchanged for reversible ones, so it can never decrease. Any local entropy decrease must be more than offset by an increase elsewhere.

  151. Question 151Thermodynamics

    In a simple ideal Rankine cycle, the condenser pressure is lowered while all other conditions are held fixed. What is the typical effect?

    1. Net work output rises but turbine exit quality falls. Correct answer.
    2. The thermal efficiency is unaffected.
    3. The turbine exit quality rises and cycle efficiency falls.
    4. Pump work increases more than turbine work does.

    Explanation

    Lowering the condenser pressure lowers the saturation temperature at which heat is rejected, which increases the work produced in the turbine and raises cycle efficiency. The trade-off is a lower quality at the turbine exit, which can erode turbine blades.

  152. Question 152Thermodynamics

    For moist air, the dry-bulb and wet-bulb temperatures are measured to be equal. What does this indicate?

    1. The air is superheated.
    2. The relative humidity is zero.
    3. The dew point is below the dry-bulb temperature.
    4. The air is saturated with water vapor. Correct answer.

    Explanation

    Evaporative cooling lowers the wet-bulb temperature below the dry-bulb temperature whenever the air can accept more moisture. When the two temperatures coincide, no evaporation can occur, which means the air is at 100 percent relative humidity, that is, saturated.

  153. Question 153Thermodynamics

    A compressor has an isentropic efficiency of 80 percent and requires 100 kJ/kg of work in the ideal isentropic case. What is the actual work input?

    1. 120 kJ/kg
    2. 80 kJ/kg
    3. 125 kJ/kg Correct answer.
    4. 180 kJ/kg

    Explanation

    For a compressor, isentropic efficiency is the ideal work divided by the actual work, η_c = w_s/w_a. Rearranging gives w_a = 100/0.80 = 125 kJ/kg, since irreversibilities make the real compressor require more work than the ideal one.

  154. Question 154Thermodynamics

    An ideal air-standard Brayton cycle operates with a pressure ratio of 8 and k = 1.4. What is the approximate thermal efficiency?

    1. 45% Correct answer.
    2. 62%
    3. 36%
    4. 55%

    Explanation

    For an ideal Brayton cycle with constant specific heats, η = 1 − r_p^(−(k−1)/k). With r_p = 8 and (k−1)/k = 0.2857, 8^0.2857 ≈ 1.811, so η ≈ 1 − 0.552 ≈ 0.45.

  155. Question 155Thermodynamics

    A heat engine receives 500 kJ of heat from a source and rejects 300 kJ to a sink during each cycle. What is its thermal efficiency?

    1. 37.5%
    2. 60%
    3. 62.5%
    4. 40% Correct answer.

    Explanation

    Thermal efficiency is net work divided by heat input, and the net work equals 500 − 300 = 200 kJ. Thus η = 200/500 = 0.40, or 40 percent.

  156. Question 156Thermodynamics

    For an ideal gas, the enthalpy depends on which property or properties?

    1. Both pressure and temperature
    2. Temperature only Correct answer.
    3. Specific volume only
    4. Pressure only

    Explanation

    Because the internal energy of an ideal gas is a function of temperature alone and the product Pv equals RT, the enthalpy h = u + RT is also a function of temperature alone. This underlies the use of tabulated h(T) values for ideal gases.

  157. Question 157Thermodynamics

    One kilogram of air (cp = 1.005 kJ/kg·K, R = 0.287 kJ/kg·K) is heated at constant pressure from 300 K to 400 K. What is the entropy change of the air?

    1. 0.406 kJ/kg·K
    2. 0.289 kJ/kg·K Correct answer.
    3. 0.083 kJ/kg·K
    4. 0.207 kJ/kg·K

    Explanation

    For an ideal gas at constant pressure, Δs = cp ln(T2/T1), since the pressure term vanishes. Thus Δs = 1.005 ln(400/300) = 1.005(0.2877) ≈ 0.289 kJ/kg·K.

  158. Question 158Thermodynamics

    Steam enters an adiabatic turbine at 3 MPa and 400 °C with h = 3231 kJ/kg and s = 6.923 kJ/kg·K. It leaves at 10 kPa, where s_f = 0.649 kJ/kg·K and s_fg = 7.501 kJ/kg·K. What is the exit quality for an isentropic turbine?

    1. 0.76
    2. 0.92
    3. 0.836 Correct answer.
    4. 0.68

    Explanation

    An isentropic turbine has s2 = s1, and the exit state lies inside the saturation dome. Therefore x = (s2 − s_f)/s_fg = (6.923 − 0.649)/7.501 ≈ 0.836.

  159. Question 159Thermodynamics

    1000 kJ of heat is transferred from a reservoir at 500 K to a reservoir at 300 K, with both reservoirs held at constant temperature. What is the total entropy generated?

    1. 0.667 kJ/K
    2. 1.333 kJ/K Correct answer.
    3. 3.333 kJ/K
    4. 5.333 kJ/K

    Explanation

    The source loses entropy, ΔS_source = −1000/500 = −2 kJ/K, while the sink gains ΔS_sink = 1000/300 = 3.333 kJ/K. Summing the changes of the two reservoirs gives 1.333 kJ/K of entropy generated, consistent with an irreversible heat transfer across a finite temperature difference.

  160. Question 160Thermodynamics

    A Carnot refrigerator removes heat from a space at −10 °C and rejects heat to surroundings at 40 °C. What is its coefficient of performance?

    1. 0.19
    2. 4.26
    3. 6.26
    4. 5.26 Correct answer.

    Explanation

    The Carnot refrigerator COP is T_L/(T_H − T_L) using absolute temperatures, so 263 K/(313 K − 263 K) = 263/50 ≈ 5.26. This value is the upper bound for any refrigerator operating between these two temperatures.

  161. Question 161Electrical and Computer Engineering

    A 12 V ideal DC source is connected directly across a 4 Ω resistor. What power is dissipated in the resistor?

    1. 36 W Correct answer.
    2. 3 W
    3. 144 W
    4. 48 W

    Explanation

    The current is I = V/R = 12/4 = 3 A. Power is then P = I²R = 9 × 4 = 36 W, equivalently P = V²/R = 144/4.

  162. Question 162Electrical and Computer Engineering

    A 24 V DC source feeds a 6 kΩ resistor in series with a 3 kΩ resistor connected to ground. What are the Thevenin voltage and resistance seen across the 3 kΩ resistor?

    1. 8 V and 2 kΩ Correct answer.
    2. 12 V and 3 kΩ
    3. 8 V and 9 kΩ
    4. 16 V and 2 kΩ

    Explanation

    The open-circuit voltage is set by the divider: 24 × 3/(6+3) = 8 V. The Thevenin resistance is found by shorting the source, leaving 6 kΩ in parallel with 3 kΩ, which is 2 kΩ.

  163. Question 163Electrical and Computer Engineering

    A 10 µF capacitor is charged through a 10 kΩ resistor. What is the time constant of this RC circuit?

    1. 0.01 s
    2. 1 s
    3. 10 s
    4. 0.1 s Correct answer.

    Explanation

    The time constant of a series RC circuit is τ = RC. Substituting 10⁴ Ω and 10⁻⁵ F gives τ = 0.1 s.

  164. Question 164Electrical and Computer Engineering

    When a silicon pn junction is forward biased, which condition develops?

    1. Only drift current flows across the junction.
    2. The depletion region widens and the barrier rises.
    3. The depletion region narrows and diffusion dominates. Correct answer.
    4. The junction behaves as an open circuit.

    Explanation

    Forward bias opposes the built-in potential, so the depletion width shrinks and the potential barrier is lowered. The reduced barrier lets majority carriers diffuse across, and diffusion current dominates the small drift current.

  165. Question 165Electrical and Computer Engineering

    An ideal op-amp is wired as an inverting amplifier with input resistor 25 kΩ and feedback resistor 100 kΩ. For a 0.5 V input, what is the output voltage?

    1. +2.0 V
    2. -8.0 V
    3. -0.5 V
    4. -2.0 V Correct answer.

    Explanation

    The inverting configuration has gain -R_f/R_in = -100/25 = -4. Multiplying the 0.5 V input by -4 gives -2.0 V.

  166. Question 166Electrical and Computer Engineering

    Which expression is equivalent to (A·B)' ?

    1. (A + B)'
    2. A'·B'
    3. A' + B' Correct answer.
    4. A + B

    Explanation

    De Morgan's theorem states that the complement of a product equals the sum of the complements, so (A·B)' = A' + B'.

  167. Question 167Electrical and Computer Engineering

    A JK flip-flop has J = 1 and K = 1 applied, with a stable clock. What happens on the next active clock edge?

    1. It clears Q to 0.
    2. It toggles Q to the opposite state. Correct answer.
    3. It holds its previous state.
    4. It sets Q to 1.

    Explanation

    With both inputs high the flip-flop is in toggle mode, so each active clock edge flips the stored value. Holding requires J = K = 0, while set and reset require only one input high.

  168. Question 168Electrical and Computer Engineering

    In 8-bit two's complement, 0x64 and 0x64 are added and the 8-bit result is 0xC8. Which statement describes the outcome?

    1. 0xC8 is +72 and overflow occurred.
    2. 0xC8 is -56 and no overflow occurred.
    3. 0xC8 is +200, so the sum is valid.
    4. 0xC8 is -56 and overflow occurred. Correct answer.

    Explanation

    0x64 equals +100, so the true sum is +200, which exceeds the 8-bit signed maximum of +127. Interpreting 0xC8 as a signed byte gives -56, and adding two positive numbers to get a negative result signals overflow.

  169. Question 169Electrical and Computer Engineering

    A single-phase load draws 10 A rms at 230 V rms with a lagging power factor of 0.8. What is the average real power delivered to the load?

    1. 1840 W Correct answer.
    2. 2300 W
    3. 1472 W
    4. 1150 W

    Explanation

    Real power is P = V_rms·I_rms·cos φ, where cos φ is the power factor. Thus P = 230 × 10 × 0.8 = 1840 W.

  170. Question 170Electrical and Computer Engineering

    A lossless 50 Ω transmission line is terminated by a purely resistive 100 Ω load. What is the reflection coefficient at the load?

    1. 0.50
    2. 0.33 Correct answer.
    3. -0.33
    4. 2.00

    Explanation

    For a resistive termination the voltage reflection coefficient is Γ = (Z_L - Z_0)/(Z_L + Z_0). Substituting gives (100 - 50)/(100 + 50) = 50/150 = 0.33.

  171. Question 171Electrical and Computer Engineering

    A 200-turn coil links a flux that increases uniformly by 0.05 Wb in 0.1 s. What magnitude of emf is induced in the coil?

    1. 200 V
    2. 100 V Correct answer.
    3. 1 V
    4. 10 V

    Explanation

    Faraday's law gives |e| = N·dΦ/dt. The flux changes at 0.05/0.1 = 0.5 Wb/s, so e = 200 × 0.5 = 100 V.

  172. Question 172Electrical and Computer Engineering

    A silicon npn transistor is measured with V_BE = 0.7 V and V_CE = 0.2 V. In which region is it operating?

    1. Saturation Correct answer.
    2. Forward active
    3. Cutoff
    4. Reverse active

    Explanation

    In saturation both junctions are forward biased, which drives the collector-emitter voltage down to a small value of roughly 0.2 V. A forward-active device would instead show V_CE well above V_BE.

  173. Question 173Electrical and Computer Engineering

    A system has Laplace transform F(s) = 10/[s(s + 2)]. Assuming the final value theorem applies, what is the steady-state value of f(t)?

    1. The final value does not exist.
    2. 0
    3. 10
    4. 5 Correct answer.

    Explanation

    The final value theorem states that f(∞) = lim(s→0) s·F(s). Here s·F(s) = 10/(s + 2), which evaluates to 10/2 = 5 at s = 0. The poles at 0 and -2 lie in the left half-plane apart from the single pole at the origin, so the theorem is valid.

  174. Question 174Electrical and Computer Engineering

    A 25 kHz sinusoid is sampled at 44.1 kHz. At what frequency does the resulting alias appear?

    1. 5.9 kHz
    2. 22.05 kHz
    3. 19.1 kHz Correct answer.
    4. 25.0 kHz

    Explanation

    The Nyquist frequency is half the sampling rate, 22.05 kHz, and the input exceeds it. Aliasing folds the tone to |44.1 - 25| = 19.1 kHz.

  175. Question 175Electrical and Computer Engineering

    A causal discrete-time LTI system has poles at z = 0.5 and z = 1.05. How is the system classified?

    1. Marginally stable, since one pole lies on the unit circle
    2. Stable, since one pole lies inside the unit circle
    3. Unstable, since one pole lies outside the unit circle Correct answer.
    4. Stable, since both poles are real

    Explanation

    A causal system is bounded-input bounded-output stable only if all poles lie strictly inside the unit circle. The pole at 1.05 has magnitude greater than one, so the impulse response grows without bound.

  176. Question 176Electrical and Computer Engineering

    In a Mealy finite state machine, the output is a function of which quantities?

    1. The current input only
    2. The current state and the current input Correct answer.
    3. The current state only
    4. The previous state and the clock edge

    Explanation

    A Mealy machine computes its output combinationally from both the present state and the present input, so the output can change whenever the input changes. A Moore machine, by contrast, depends on the present state alone.

  177. Question 177Electrical and Computer Engineering

    A program executes three instruction classes: 40% ALU (1 cycle each), 30% load/store (4 cycles each), and 30% branch (2 cycles each). What is the average cycles per instruction?

    1. 2.33
    2. 7.0
    3. 1.9
    4. 2.2 Correct answer.

    Explanation

    The average CPI is the weighted sum of the per-class cycle counts: 0.40(1) + 0.30(4) + 0.30(2) = 0.4 + 1.2 + 0.6 = 2.2.

  178. Question 178Electrical and Computer Engineering

    A series RLC circuit uses a 1 H inductor and a 1 µF capacitor. At what frequency does it resonate?

    1. 15.9 kHz
    2. 1.59 kHz
    3. 159 Hz Correct answer.
    4. 15.9 Hz

    Explanation

    Series resonance occurs at f = 1/(2π√(LC)). With LC = 10⁻⁶, √(LC) = 10⁻³ s, giving f = 1/(2π × 10⁻³) ≈ 159 Hz.

  179. Question 179Electrical and Computer Engineering

    What condition must be met for an n-channel enhancement-mode MOSFET to conduct?

    1. A conducting channel already exists at zero gate-to-source voltage.
    2. Only the drain-to-source voltage controls channel formation.
    3. A negative gate-to-source voltage forms the channel.
    4. A gate-to-source voltage above the threshold forms an inversion channel. Correct answer.

    Explanation

    An enhancement-mode device has no built-in channel, so the gate must be driven above the threshold voltage to invert the surface and form one. In the triode and saturation regions the drain current then also depends on V_DS and on V_GS - V_th.

  180. Question 180Electrical and Computer Engineering

    A 10 µF capacitor is charged to 50 V. How much energy is stored?

    1. 12.5 mJ Correct answer.
    2. 50 mJ
    3. 25 mJ
    4. 1.25 mJ

    Explanation

    The stored energy is W = ½CV². Substituting gives 0.5 × 10 × 10⁻⁶ × 2500 = 0.0125 J, which is 12.5 mJ.

  181. Question 181Safety, Health, and Environment

    According to the hierarchy of controls, which strategy is the most effective way to reduce a workplace hazard?

    1. Providing training on safe work procedures
    2. Posting warning signs near the hazard
    3. Eliminating the hazard from the process Correct answer.
    4. Requiring workers to wear personal protective equipment

    Explanation

    The hierarchy ranks controls by reliability: elimination, substitution, engineering controls, administrative controls, and finally PPE. Elimination removes the hazard entirely, so worker exposure cannot occur regardless of human behavior. Controls that depend on worker action, such as signs and training, sit near the bottom of the hierarchy.

  182. Question 182Safety, Health, and Environment

    In a safety data sheet prepared under the OSHA Hazard Communication Standard, which information is provided in Section 8?

    1. First-aid measures, including symptoms and required treatment
    2. Fire-fighting measures, including suitable extinguishing media
    3. Exposure controls and personal protection Correct answer.
    4. Physical and chemical properties, including appearance and odor

    Explanation

    The Hazard Communication Standard prescribes a 16-section safety data sheet format, and Section 8 is titled Exposure Controls/Personal Protection. It contains occupational exposure limits, engineering controls, and recommended PPE. Physical properties appear in Section 9 and first-aid measures in Section 4.

  183. Question 183Safety, Health, and Environment

    Under OSHA injury and illness recordkeeping rules, how soon must an employer enter a newly recordable case on the OSHA 300 Log after learning of it?

    1. Ten calendar days
    2. Fourteen calendar days
    3. Three calendar days
    4. Seven calendar days Correct answer.

    Explanation

    The recordkeeping rule requires that each recordable injury or illness be entered on the OSHA 300 Log within seven calendar days of receiving information that the case occurred. The entry must be made even if the full extent of the injury is not yet known. Updates are made as additional information becomes available.

  184. Question 184Safety, Health, and Environment

    A fire involving a pool of burning gasoline is classified as which type of fire?

    1. Class C, which involves energized electrical equipment such as motors and wiring
    2. Class A, which involves ordinary combustible materials such as wood and paper
    3. Class B, which involves flammable liquids such as gasoline Correct answer.
    4. Class D, which involves combustible metals such as magnesium and sodium

    Explanation

    Fire classes are defined by the fuel involved, and flammable and combustible liquids and gases fall in Class B. Extinguisher selection must match the class, which is why aqueous film-forming foam or dry chemical rated for B is used on fuel fires. Water streams are inappropriate because they can spread the burning liquid.

  185. Question 185Safety, Health, and Environment

    Which duty belongs to the attendant stationed outside a permit-required confined space during entry operations?

    1. Keeping an accurate count of the authorized entrants in the space Correct answer.
    2. Closing and sealing the entry hatch while entrants are inside
    3. Performing the rescue inside the space without additional help
    4. Testing the atmosphere inside the space before each entry

    Explanation

    The permit-required confined space standard defines the attendant's role as monitoring and communication: the attendant stays outside, tracks how many entrants are inside, watches for changing conditions, and summons rescue services when needed. The attendant is not to enter the space to attempt a rescue. Pre-entry atmospheric testing is part of the entry preparation performed under the entry permit.

  186. Question 186Safety, Health, and Environment

    Under OSHA's lockout/tagout standard, who is authorized to remove a lock that an employee has applied to an energy-isolating device?

    1. Any supervisor familiar with the equipment
    2. The plant safety manager on duty
    3. Any maintenance worker on the same shift
    4. The employee who applied the lock Correct answer.

    Explanation

    Lockout protection belongs to the individual who applied the device, and only that authorized employee may remove it. If the employee is unavailable, the employer must have a specific procedure that includes verifying the employee is not exposed and notifying the employee before the lock is removed. This prevents unexpected energization while someone is working on the equipment.

  187. Question 187Safety, Health, and Environment

    A worker is exposed to 95 dBA for 4 hours and 85 dBA for the remaining 4 hours of an 8-hour shift. Using OSHA's 5 dB exchange rate, what is the equivalent 8-hour time-weighted average sound level?

    1. 88 dBA
    2. 95 dBA
    3. 93 dBA Correct answer.
    4. 98 dBA

    Explanation

    Each exposure is converted to a dose fraction using the permissible duration at that level: 4 hours allowed at 95 dBA and 8 hours allowed at 85 dBA, giving D = 4/4 + 4/8 = 1.5, or 150 percent. The TWA is then 16.61 log10(D/100) + 90, which equals about 93 dBA. That value exceeds the 90 dBA permissible exposure limit, so hearing protection and a hearing conservation program are required.

  188. Question 188Safety, Health, and Environment

    Under OSHA general industry rules, at what height above a lower level must employees be protected from falls on a walking-working surface with an unprotected edge?

    1. 6 feet (1.8 m)
    2. 10 feet (3.1 m)
    3. 4 feet (1.2 m) Correct answer.
    4. 5 feet (1.5 m)

    Explanation

    The walking-working surfaces standard requires fall protection at 4 feet in general industry. The 6-foot trigger applies to construction, 10 feet to scaffolds, and 5 feet to longshoring work. The applicable threshold depends on the industry standard that governs the task, not on the employer's preference.

  189. Question 189Safety, Health, and Environment

    Where must excavated material and equipment be kept relative to the edge of a trench?

    1. Directly on the edge to serve as a barrier
    2. At least 2 feet back from the edge Correct answer.
    3. At least 10 feet back from the edge
    4. At least 6 feet back from the edge

    Explanation

    The excavation standard requires that spoil, equipment, and other materials be kept at least 2 feet from the edge of the excavation. This setback reduces surcharge loading on the trench walls and keeps material from falling onto workers below. Mobile equipment and haul roads require additional evaluation because concentrated loads can trigger collapse.

  190. Question 190Safety, Health, and Environment

    How often must an employee who is required to use a tight-fitting respirator be fit tested?

    1. Annually Correct answer.
    2. Before initial use only
    3. Every three years
    4. Every six months

    Explanation

    The respiratory protection standard requires fit testing before initial use and at least annually thereafter. Additional fit testing is required when a different facepiece model or size is introduced or when changes such as weight gain, dental work, or scarring could affect the seal. Fit testing is separate from the medical evaluation and from the required training.

  191. Question 191Safety, Health, and Environment

    How often must an employer review and update the exposure control plan required by OSHA's bloodborne pathogens standard?

    1. Only after an exposure incident occurs
    2. Every six months
    3. Every three years
    4. At least annually Correct answer.

    Explanation

    The bloodborne pathogens standard requires that the written exposure control plan be reviewed and updated at least annually and whenever necessary to reflect new or modified tasks, procedures, or employee positions. The review is meant to keep the plan aligned with current work practices and technology. Waiting for an incident before updating leaves known gaps in place.

  192. Question 192Safety, Health, and Environment

    An investigation finds that a worker's hand was struck by a rotating shaft because the machine guard had been removed months earlier and never replaced. Which finding is the root cause rather than the direct cause?

    1. The machine guard had been removed months before the incident
    2. No procedure existed for verifying guard replacement Correct answer.
    3. The injury required stitches and one day away from work
    4. The employee's hand contacted the rotating shaft of the mixer

    Explanation

    Root causes are the underlying system deficiencies, such as missing procedures, inadequate training, or poor design, that allow unsafe conditions to persist. Correcting them prevents recurrence across the facility rather than at one machine. Contact with the shaft is the direct cause of the injury, and the medical treatment is the consequence.

  193. Question 193Safety, Health, and Environment

    On a construction site, which practice satisfies OSHA requirements for protecting employees who use temporary 120-volt, 15-ampere receptacles that are not part of the building's permanent wiring?

    1. Measuring the resistance of each tool housing once per year
    2. Using ground-fault circuit interrupter protection Correct answer.
    3. Requiring workers to wear insulating gloves when plugging in tools
    4. Posting a warning sign at each receptacle identifying the circuit

    Explanation

    Temporary receptacles on construction sites must be protected either by ground-fault circuit interrupters or by an assured equipment grounding conductor program with recorded tests. GFCI protection is the more common approach because it interrupts current at a low threshold. Gloves, signs, and periodic resistance checks do not provide the required automatic protection.

  194. Question 194Safety, Health, and Environment

    Under OSHA's HAZWOPER standard, which training is required before an employee may work at a hazardous waste site that poses a health hazard?

    1. No set hours, as long as the employee is supervised
    2. 24 hours of initial training
    3. 8 hours of initial training
    4. 40 hours of initial training Correct answer.

    Explanation

    General site workers at hazardous waste cleanup sites must complete 40 hours of off-site instruction and three days of supervised field experience before participating in hazardous waste operations. The 24-hour level applies to occasional site workers who do not disturb contaminated media. Refresher training of 8 hours is required annually thereafter.

  195. Question 195Safety, Health, and Environment

    Which oxygen concentration marks the threshold below which an atmosphere is classified as oxygen deficient?

    1. Below 19.5 percent by volume Correct answer.
    2. Below 16.0 percent by volume
    3. Below 12.5 percent by volume
    4. Below 23.5 percent by volume

    Explanation

    Atmospheric monitoring in confined spaces treats anything below 19.5 percent oxygen as oxygen deficient, while readings above 23.5 percent indicate oxygen enrichment. Both conditions are hazardous and require ventilation or other controls before entry. Lower values increase the risk of impaired judgment, loss of consciousness, and death.

  196. Question 196Safety, Health, and Environment

    What is the OSHA permissible exposure limit for respirable crystalline silica in general industry, expressed as an 8-hour time-weighted average?

    1. 50 micrograms per cubic meter Correct answer.
    2. 100 micrograms per cubic meter
    3. 25 micrograms per cubic meter
    4. 10 micrograms per cubic meter

    Explanation

    The respirable crystalline silica standard sets the permissible exposure limit at 50 micrograms per cubic meter as an 8-hour time-weighted average. An action level of 25 micrograms per cubic meter triggers exposure monitoring and, when exceeded, medical surveillance and increased controls. Employers must use engineering controls such as wet methods or local exhaust ventilation before relying on respirators.

  197. Question 197Safety, Health, and Environment

    A facility generates 1,500 kilograms of hazardous waste during a calendar month. Under RCRA, how is the facility classified for that month?

    1. Large quantity generator Correct answer.
    2. Conditionally exempt generator
    3. Very small quantity generator
    4. Small quantity generator

    Explanation

    Generator status is based on the quantity of hazardous waste produced in a calendar month: 1,000 kilograms or more is a large quantity generator, 100 to 1,000 kilograms is a small quantity generator, and less than 100 kilograms is a very small quantity generator. At 1,500 kilograms the facility exceeds the large quantity generator threshold. That status brings stricter accumulation time limits, contingency planning, and reporting requirements.

  198. Question 198Safety, Health, and Environment

    Under the SPCC rule, a non-exempt facility must prepare and implement a spill prevention plan when its aggregate aboveground oil storage capacity exceeds which threshold?

    1. 660 gallons
    2. 42,000 gallons
    3. 10,000 gallons
    4. 1,320 gallons Correct answer.

    Explanation

    The SPCC rule applies to non-exempt facilities with total aboveground oil storage capacity greater than 1,320 gallons in containers of 55 gallons or more. Facilities with only buried storage are regulated above 42,000 gallons of completely buried capacity. The rule also requires secondary containment and, for qualifying facilities, a certified plan.

  199. Question 199Safety, Health, and Environment

    A newly hired worker begins outdoor work in hot weather. Which practice best reduces the risk of heat illness during the first two weeks?

    1. Starting the worker at full workload so the body adapts quickly
    2. Restricting fluids until the end of the shift to limit cramping
    3. Issuing a cooling vest and keeping the worker in direct sun continuously
    4. Phasing in workload and heat exposure over one to two weeks Correct answer.

    Explanation

    Heat acclimatization develops over roughly one to two weeks of gradually increasing exposure and workload, so new and returning workers are the highest-risk group. The process must be paired with readily available cool water, scheduled rest breaks, and shaded recovery areas. Sudden full exposure overwhelms the body's ability to adapt.

  200. Question 200Safety, Health, and Environment

    Under OSHA's personal protective equipment standard, how must a workplace hazard assessment for PPE selection be handled?

    1. Certified in writing by the employer Correct answer.
    2. Repeated only after a recordable injury occurs
    3. Verified verbally by the employee's supervisor
    4. Performed by an outside safety consultant

    Explanation

    The employer must assess the workplace to determine whether hazards necessitate PPE and must communicate the selection decisions to affected employees. The assessment must be documented with a written certification that identifies the workplace evaluated, the person certifying, and the date. The standard does not require an outside consultant or restrict reassessment to post-injury events.

FE Exam flashcards

32 cards. Read the term and the definition here. The deck at the top of this page is optional.

Quadratic formula
For ax² + bx + c = 0, x = [−b ± √(b² − 4ac)]/(2a). The discriminant b² − 4ac gives two real roots if positive, one repeated root if zero, and a complex-conjugate pair if negative.
L'Hôpital's rule
When the limit of f(x)/g(x) takes the indeterminate form 0/0 or ∞/∞, the limit equals the limit of f'(x)/g'(x), provided that the latter limit exists.
Integration by parts
∫u dv = uv − ∫v du. Choose u as the factor that simplifies when differentiated, such as ln x or xⁿ, and let dv be the remaining part that is easy to integrate.
Dot product of vectors
A·B = |A||B|cos θ = AₓBₓ + A_yB_y + A_zB_z. It equals zero when the vectors are perpendicular and gives the component of one vector along the other.
Bayes' theorem
P(A|B) = P(B|A)·P(A)/P(B). It updates a prior probability P(A) with new evidence B, where the denominator is the total probability of the evidence.
Binomial distribution mean
For n independent trials each with success probability p, the binomial mean is np and the variance is np(1 − p); the standard deviation is the square root of that variance.
Standard error of the mean
SE = s/√n, where s is the sample standard deviation and n is the sample size. It estimates how widely sample means scatter about the true population mean.
Type I and Type II errors
A Type I error rejects a true null hypothesis and occurs with probability α, the chosen significance level. A Type II error fails to reject a false null, with probability β.
Capital recovery factor
A = P·[i(1 + i)ⁿ]/[(1 + i)ⁿ − 1]. It converts a present sum into an equivalent uniform end-of-period payment over n periods at interest rate i per period.
Effective annual interest rate
For a nominal rate r compounded m times per year, i_eff = (1 + r/m)^m − 1. As m becomes large the value approaches e^r − 1, the continuous-compounding limit.
Net present worth
Discount every cash flow to time zero using NPW = Σ CF_t/(1 + i)^t. A positive result means the project earns more than the minimum attractive rate of return.
Paramount professional obligation
Under the NSPE Fundamental Canons, engineers hold the safety, health, and welfare of the public paramount, perform services only in their areas of competence, and issue only objective, truthful public statements.
Signing and sealing limits
Engineers may sign and seal only documents they personally prepared or that were prepared under their direct supervisory control, and only for work within their demonstrated technical competence.
Conflict of interest disclosure
Engineers must disclose to clients or employers any known or potential conflict, such as a financial interest in a supplier, and may not take pay from more than one party for the same service without consent.
Static equilibrium conditions
A rigid body at rest satisfies ΣF = 0 and ΣM = 0 taken about any convenient point. In two dimensions these give three independent scalar equations for three unknowns.
Axial deformation formula
δ = FL/(AE), where F is the axial load, L the member length, A the cross-sectional area, and E the elastic modulus. It requires linear-elastic material and constant load and section.
Parallel axis theorem
I = I_c + A·d², where I_c is the moment of inertia about the centroidal axis parallel to the axis of interest, A the area, and d the perpendicular distance between the two axes.
Zero-force truss members
At a joint having only two non-collinear members and no external load or reaction, both members carry zero force; with three members where two are collinear, the third is zero.
Poisson's ratio
ν = −ε_lateral/ε_axial under uniaxial loading. Most metals fall near 0.25 to 0.35, and the value cannot exceed 0.5 for an isotropic material that preserves volume behavior.
Yield strength by offset method
On an engineering stress-strain curve, yield strength is found by drawing a line parallel to the elastic slope at 0.2 percent strain and reading the stress where it meets the curve.
Lever rule phase fractions
In a two-phase region, the mass fraction of a phase equals the length of the tie-line segment on the opposite side of the alloy composition divided by the total tie-line length.
Reynolds number criterion
Re = ρVD/μ = VD/ν. For flow in a circular pipe, Re below roughly 2100 indicates laminar flow, Re above roughly 4000 indicates turbulent flow, with transition between them.
Bernoulli equation
P/γ + V²/(2g) + z = constant along a streamline for steady, incompressible, frictionless flow. Each term is energy per unit weight, expressed as a head of fluid.
Buoyant force
By Archimedes' principle, F_b = γ·V_displaced, the weight of the displaced fluid. A floating body displaces a volume whose weight equals the body's own weight.
Carnot efficiency
η_max = 1 − T_L/T_H for a reversible engine operating between reservoirs at absolute temperatures T_L and T_H. No real engine between those reservoirs can exceed this value.
Steam quality
Quality x is the mass fraction of vapor in a saturated liquid-vapor mixture. Mixture properties follow v = v_f + x(v_g − v_f) and h = h_f + x·h_fg.
Isentropic ideal-gas relations
For an ideal gas with constant specific heats undergoing an isentropic process, T₂/T₁ = (P₂/P₁)^((k−1)/k) and P·v^k = constant, where k = c_p/c_v.
Thevenin equivalent circuit
Any linear two-terminal network can be replaced by a voltage source V_th in series with R_th, where V_th is the open-circuit voltage and R_th the resistance seen with independent sources deactivated.
RC time constant
In a series resistor-capacitor circuit, τ = RC is the time to reach about 63.2 percent of the total voltage change; after roughly five time constants the transient is essentially finished.
Balanced three-phase power
For a balanced three-phase load, P = √3·V_L·I_L·cos θ, where V_L and I_L are line voltage and line current and θ is the angle between phase voltage and phase current.
Hierarchy of hazard controls
Control effectiveness runs from elimination and substitution, through engineering controls and administrative controls, down to personal protective equipment, which is the least reliable option.
OSHA noise exposure limit
The permissible exposure limit is 90 dBA as an 8-hour time-weighted average, with an action level of 85 dBA and a 5 dB exchange rate that halves allowable exposure time.

FE Exam study guide

Mathematics

What to master

The FE mathematics scope is broad but shallow: vector algebra (dot and cross products, projections, unit vectors), analytic geometry (lines, planes, conics, distance formulas), single- and multivariable calculus (partial derivatives, multiple integrals, divergence, curl, line and surface integrals), linear algebra (matrix arithmetic, determinants, inverse, eigenvalues, solving linear systems by elimination), ordinary differential equations (separable, first-order linear with integrating factor, second-order constant-coefficient), and numerical methods (Newton-Raphson, trapezoidal and Simpson's rules, Euler's method).

Traps

  • Mixing degrees and radians: derivatives and series for trig functions assume radians.
  • Confusing gradient (scalar in, vector out), divergence (vector in, scalar out) and curl (vector in, vector out).
  • Sign errors when reversing definite-integral limits, and forgetting the constant of integration.
  • Assuming a matrix is invertible: check that det(A) is nonzero; eigenvalues come from det(A - lambda*I) = 0.
  • Newton-Raphson diverging or oscillating near a zero derivative -- the exam expects you to recognize when the method is unreliable.

Worked example

For the vector field F = (x^2, 3y, -z), the divergence is the sum of partials: d/dx(x^2) + d/dy(3y) + d/dz(-z) = 2x + 3 - 1 = 2x + 2. If a choice offers 2x + 3 + 1, you have been caught by the sign on the z-term.

Rule of thumb: check every antiderivative by differentiating it back, and sanity-check the magnitude and units of any numerical answer before choosing an option.

Probability and Statistics

What to master

Know the standard distributions and when each applies: binomial (fixed n, independent trials, constant p), Poisson (counts per unit time or space), normal (with z-scores and the empirical 68/95/99.7 rule), exponential (time between Poisson events), and the hypergeometric idea of sampling without replacement. Be fluent in combinations and permutations, conditional probability, independence, Bayes' theorem, expected value and variance, standard error, confidence intervals, hypothesis testing (Type I vs Type II error, p-value logic), and simple linear regression (slope, correlation coefficient, coefficient of determination).

Traps

  • P(A|B) is not P(B|A); Bayes questions hinge on reversing them correctly.
  • Sample standard deviation divides by (n - 1); population divides by n. The exam will offer both.
  • "At least one" is almost always easiest via the complement: 1 - P(none).
  • Without-replacement sampling changes p from draw to draw and invalidates the simple binomial formula.
  • Confidence level is not the probability that a computed interval contains the parameter in repeated sampling -- wording matters.

Worked example

A process yields 10% defective parts; three parts are drawn independently. P(at least one defective) = 1 - P(all good) = 1 - 0.9^3 = 1 - 0.729 = 0.271.

Rule of thumb: write down what is fixed (n, p) and whether sampling is with replacement before touching a formula; and convert every normal problem to a z-score with sigma of the mean, sigma/sqrt(n), when working with sample averages.

Engineering Economics

What to master

The core is the time value of money: single-payment factors (P/F, F/P), uniform-series factors (P/A, A/P, A/F, F/A), gradient and geometric-gradient factors, and the correct compounding convention (discrete annual vs nominal rate with m periods, effective annual rate = (1 + r/m)^m - 1). Then build cash flows and compare alternatives using present worth, annual worth, future worth, internal rate of return, payback period, and benefit-cost ratio. Understand depreciation (straight-line, MACRS), book value, replacement analysis, inflation-adjusted versus actual dollars, and the minimum attractive rate of return as the decision threshold.

Traps

  • Annuity due (payments at the beginning of the period) versus ordinary annuity (end). Standard factor tables are ordinary annuities; adjust by multiplying by (1 + i).
  • Salvage value is a cash inflow in the final period -- omitting it flips the answer.
  • Unequal service lives cannot be compared by present worth directly; use annual worth or a common study period.
  • IRR can have multiple roots or none when the cash flow changes sign more than once.
  • Nominal rates quoted with monthly compounding are not the effective annual rate.

Worked example

A $10,000 payment due in 5 years at 8% annual compound interest has present worth P = F/(1 + i)^n = 10,000/(1.08)^5 = 10,000/1.4693 = $6,806.

Rule of thumb: draw the cash flow diagram with arrows before selecting a factor -- the diagram prevents the begin/end-of-period and salvage-sign errors that cause most lost points here.

Ethics and Professional Practice

What to master

Know the structure of professional regulation: the state licensing board, the NCEES Model Law and Model Rules, the path to licensure (ABET-accredited degree, FE and PE exams, qualifying experience), comity, and the engineer's seal and signature. Study the canons: holding public health, safety and welfare paramount; competence in the field of practice; avoiding conflicts of interest; refusing and reporting bribery or improper gifts; preserving confidentiality of client information; objectivity and truthfulness in reports and testimony; and obligations to the profession through continuing education and mentoring. Also know the rules on advertising, competitive bidding, subordination of engineering judgment, ownership of designs and intellectual property, and sustainable development responsibilities.

Traps

  • "Follow the client's instruction" is almost always the wrong answer when it conflicts with public safety or a code.
  • Sealing drawings you did not prepare or directly supervise is a violation, even with the client's permission.
  • Confidentiality is not absolute: disclosure is appropriate (and sometimes required) where public safety or legal process demands it.
  • Accepting a gift from a vendor or contractor is treated as a conflict, not simple courtesy.
  • Failure to report a known violation by another engineer can itself be a violation.

Worked example

You discover a colleague's sealed structural calculations show an overloaded beam. Correct sequence: raise it with the colleague, then with the responsible supervisor, and escalate toward the board if the safety risk is not resolved -- the obligation flows to public protection, not to collegiality.

Rule of thumb: when two answers both sound ethical, choose the one that protects public health and safety and that you could defend in front of the licensing board.

Engineering Mechanics

What to master

Statics: free-body diagrams, equilibrium in two and three dimensions, support reactions (pin, roller, fixed), truss analysis by joints and sections, zero-force member identification, frames and machines, friction (static, kinetic, impending motion, belt friction), centroids, centers of mass, and area moments of inertia including the parallel-axis theorem. Dynamics: particle and rigid-body kinematics (rectilinear, curvilinear, rotational, relative motion), Newton's second law in normal/tangential and cylindrical coordinates, work-energy, impulse-momentum, impact and restitution, and basic vibration.

Traps

  • Forgetting a reaction component at a smooth roller (only normal force, no friction) or at a pin (two components).
  • Inconsistent sign conventions between the FBD and the equilibrium equations.
  • Mass versus weight: dynamics problems need m = W/g.
  • Using diameter where a formula requires radius, especially in moment-of-inertia and circular-motion terms.
  • Assuming a zero-force member exists without applying the two-member, no-load joint rule.

Worked example

A simply supported beam of span L carries a point load P at midspan. By symmetry each reaction is P/2, the maximum shear is P/2 and the maximum bending moment is PL/4.

Rule of thumb: the parallel-axis theorem is I = I_bar + A*d^2 -- add the area times the square of the offset to the centroidal moment of inertia, never the reverse.

Materials Science

What to master

Stress and strain in tension, compression and shear; the engineering stress-strain curve (proportional limit, elastic modulus, yield strength by the 0.2% offset method, ultimate tensile strength, fracture strain, toughness as area under the curve); Poisson's ratio and the relation G = E/[2(1 + nu)]; thermal expansion strain; hardness scales and their approximate correlation with strength; fatigue (S-N curves, endurance limit, stress concentration factors); creep and elevated-temperature behavior; ductile versus brittle fracture; phase diagrams and the iron-carbon system; heat treatment (annealing, quenching, tempering); corrosion mechanisms and protection; and properties of polymers, ceramics and composites.

Traps

  • Engineering stress uses the original area; true stress uses the instantaneous area. They diverge after yield.
  • Ductility is measured by percent elongation or reduction of area -- not by the ultimate strength.
  • Fatigue failures occur below the yield strength; a part can be safe statically and fail cyclically.
  • Unit discipline: MPa = N/mm^2 = 10^6 Pa; mixing ksi and MPa is a classic distractor.
  • Thermal stress appears only when expansion is restrained.

Worked example

A steel bar with E = 200 GPa carries 150 MPa of stress within the elastic range. Strain = stress/E = 150 x 10^6 / 200 x 10^9 = 7.5 x 10^-4 (dimensionless). Over a 2 m length the elongation is 1.5 mm.

Rule of thumb: check the computed stress against yield first -- if it exceeds yield, linear elastic formulas no longer apply and the answer choice based on Hooke's law is a trap.

Fluid Mechanics

What to master

Fluid properties (density, specific weight, viscosity, surface tension, vapor pressure), hydrostatic pressure distribution and manometry, forces on plane and curved submerged surfaces, buoyancy and stability, continuity and the Bernoulli/energy equation with head losses, the Reynolds number and laminar/turbulent classification, Darcy-Weisbach friction factors (Moody chart, laminar f = 64/Re), minor losses, pipe networks and parallel/series piping, pump and system curves (head, efficiency, NPSH, cavitation), open-channel flow (Manning's equation, Froude number), orifice and weir flow, and drag on immersed bodies.

Traps

  • Gauge versus absolute pressure: Bernoulli works consistently in either, but vapor-pressure comparisons need absolute.
  • Applying Bernoulli across a pump, turbine or friction loss without adding the head terms.
  • Using volumetric flow rate where velocity is needed (divide by area) and mixing diameter with radius.
  • Confusing the friction factor f with the loss coefficient K.
  • Unit weight of water: 9.81 kN/m^3 or 62.4 lb/ft^3 -- watch the unit system.

Worked example

Water at 1000 kg/m^3 and dynamic viscosity 1.0 x 10^-3 Pas flows at 2 m/s through a 0.05 m pipe. Re = rhoV*D/mu = (1000)(2)(0.05)/0.001 = 1.0 x 10^5, which is turbulent (laminar below roughly 2100).

Rule of thumb: compute the Reynolds number first in every pipe-flow problem; it selects the friction-factor correlation and tells you whether minor losses matter.

Thermodynamics

What to master

Properties and state (ideal gas law, compressibility, saturated and superheated tables, quality), the first law for closed systems (Q - W = delta U) and open systems (steady-flow energy equation with enthalpy), boundary work, specific heats and the relation cp - cv = R, polytropic processes, the second law and entropy, Carnot efficiency, Rankine and Brayton cycles with their efficiency-improving modifications (reheat, regeneration, superheat), refrigeration and heat pumps with COP, psychrometrics (dry-bulb, wet-bulb, humidity ratio, dew point), combustion basics, and heat transfer by conduction (Fourier), convection (Newton's law of cooling) and radiation (Stefan-Boltzmann).

Traps

  • Sign convention: work done by the system is positive in most FE texts -- check the convention implied by the answer choices.
  • Carnot and other thermal efficiencies require absolute temperature (kelvin or rankine).
  • COP can legitimately exceed 1; efficiency cannot.
  • Enthalpy, not internal energy, appears in steady-flow devices such as turbines and compressors.
  • Mixing mass flow rate with molar flow rate, or forgetting to convert to a per-unit-mass basis.

Worked example

A heat engine operates between 800 K and 300 K. The Carnot limit is eta = 1 - Tc/Th = 1 - 300/800 = 0.625, or 62.5%. Using 527 C and 27 C in the same formula would give a nonsense negative result.

Rule of thumb: sketch the system boundary and label every energy crossing before writing the first law -- most thermodynamics errors are bookkeeping errors, not property errors.

Electrical and Computer Engineering

What to master

Circuit fundamentals: Ohm's law, series/parallel reduction, Kirchhoff's current and voltage laws, node and mesh analysis, superposition, Thevenin and Norton equivalents, maximum power transfer. AC: phasors, impedance of R, L and C, RMS versus peak values, real/reactive/apparent power, power factor and correction, three-phase relationships (line vs phase voltage and current, total power = sqrt(3)V_LI_L*cos theta), transformers and turns ratio, and DC/AC motor basics. Electronics: ideal op-amp rules (no input current, zero differential voltage with negative feedback), diodes, transistors as switches. Digital: number systems and binary/hex conversion, two's complement, Boolean algebra and simplification, combinational logic, flip-flops, counters, and basic computer architecture concepts.

Traps

  • Quoting RMS where the problem specifies peak (V_rms = V_peak/sqrt(2) for sinusoids).
  • Mixing real power (W), reactive power (var) and apparent power (VA); only real power does work.
  • Assuming an ideal op-amp without negative feedback -- the virtual-short rule fails.
  • Sign errors in two's complement and in KVL loop directions.

Worked example

A single-phase load draws 10 A RMS at 240 V RMS with a power factor of 0.8 lagging. Real power P = VIcos theta = 240100.8 = 1920 W; apparent power is 2400 VA and reactive power is 1440 var.

Rule of thumb: convert everything to RMS and phasor form before combining impedances; then the real power is the real part of S = VI, and losses follow from I^2*R only.

Safety, Health, and Environment

What to master

The hierarchy of controls (elimination, substitution, engineering controls, administrative controls, PPE -- in that order of preference), hazard identification and risk assessment (risk as probability times consequence), job hazard analysis, lockout/tagout, confined-space entry, machine guarding, electrical safety, fall protection, and fire prevention. Industrial hygiene: routes of exposure, air sampling, time-weighted averages, permissible exposure limits and threshold limit values, noise exposure in dBA and the 5 dB exchange rate, heat stress, and ventilation. Environmental topics: Clean Air Act and Clean Water Act permitting, RCRA hazardous waste identification and manifesting, spill reporting, stormwater, air dispersion basics, and waste minimization. Also know Safety Data Sheets, hazard communication, incident investigation and root-cause analysis.

Traps

  • PPE is the last resort, not the first answer: engineering controls outrank administrative controls and PPE.
  • Noise is logarithmic -- doubling identical sources adds about 3 dBA, not double the dBA value.
  • A TWA must be weighted by hours of exposure and normalized to an 8-hour shift.
  • Concentration times time is dose; comparing a short high exposure directly to an 8-hour PEL is wrong without weighting.

Worked example

A worker is exposed to 85 dBA for 4 hours and 95 dBA for 4 hours. A proper noise dose weights each level by duration against its allowable time (roughly 8 h at 85 dBA); the 95 dBA segment alone carries a much shorter allowable duration, so the combined dose exceeds 100% even though neither segment ran a full shift.

Rule of thumb: control the hazard at the source before protecting the worker, and always convert measured exposures to shift-weighted values before comparing to a limit.

FE Exam cheat sheet

Quick reference

Mathematics

  • Quadratic formula: for ax² + bx + c = 0, x = [−b ± √(b² − 4ac)]/(2a); discriminant b² − 4ac > 0 gives two real roots, = 0 gives one repeated root, < 0 gives a complex-conjugate pair.

  • Differentiation rules: d/dx(xⁿ) = n·xⁿ⁻¹; product rule (uv)' = u'v + uv'; quotient rule (u/v)' = (u'v − uv')/v²; chain rule d/dx f(g(x)) = f'(g)·g'.

  • Integration: ∫xⁿ dx = xⁿ⁺¹/(n+1) + C for n ≠ −1; ∫(1/x) dx = ln|x| + C; ∫eᵃˣ dx = eᵃˣ/a + C; integration by parts ∫u dv = uv − ∫v du.

  • L'Hôpital's rule: if lim f/g gives 0/0 or ∞/∞, then lim f/g = lim f'/g', applied repeatedly as needed and valid only for those indeterminate forms.

  • Area between curves = ∫(upper − lower) dx between the intersection limits; solid of revolution (disk method) V = π∫[f(x)]² dx.

  • Vectors: A·B = |A||B|cos θ = AₓBₓ + A_yB_y + A_zB_z; |A×B| = |A||B|sin θ; A·B = 0 when perpendicular, A×B = 0 when parallel.

  • Triangle relations: law of sines a/sin A = b/sin B = c/sin C; law of cosines c² = a² + b² − 2ab cos C.

  • 2×2 matrix inverse: [[a,b],[c,d]]⁻¹ = (1/(ad − bc))·[[d,−b],[−c,a]], valid only when the determinant ad − bc ≠ 0.

  • Taylor series about x = a: f(x) = f(a) + f'(a)(x − a) + f''(a)(x − a)²/2! + f'''(a)(x − a)³/3! + …

Quick reference

Probability and Statistics

  • Addition rule: P(A ∪ B) = P(A) + P(B) − P(A ∩ B); for mutually exclusive events the intersection term is zero; for independent events P(A ∩ B) = P(A)P(B).

  • Conditional probability: P(A|B) = P(A ∩ B)/P(B); Bayes' theorem P(A|B) = P(B|A)P(A)/P(B).

  • Binomial: P(X = k) = C(n,k)pᵏ(1 − p)ⁿ⁻ᵏ; mean = np, variance = np(1 − p).

  • Poisson: P(X = k) = e^(−λ)λᵏ/k!; mean and variance both equal λ, used for counts of rare events in a fixed interval.

  • Exponential distribution: f(t) = λe^(−λt) for t ≥ 0; mean = 1/λ, variance = 1/λ², used for times between Poisson events.

  • Normal distribution: z = (x − μ)/σ; approximately 68.3%, 95.4%, and 99.7% of values lie within ±1σ, ±2σ, and ±3σ of the mean.

  • Confidence interval for a mean with known σ: x̄ ± z_(α/2)·σ/√n; the standard error of the mean is s/√n and the sample variance uses n − 1 in the denominator.

  • Hypothesis tests: α = P(Type I error) = rejecting a true null; β = P(Type II error) = failing to reject a false null; power = 1 − β.

  • Linear regression: slope b = Sxy/Sxx and intercept a = ȳ − b·x̄; the correlation coefficient r lies between −1 and +1, and r² is the fraction of variance explained.

Quick reference

Engineering Economics

  • Single-payment compounding: F = P(1 + i)ⁿ and P = F(1 + i)⁻ⁿ, with i per period and n the number of periods.

  • Uniform series: F = A[((1 + i)ⁿ − 1)/i]; P = A[((1 + i)ⁿ − 1)/(i(1 + i)ⁿ)]; A = P[i(1 + i)ⁿ/((1 + i)ⁿ − 1)].

  • Effective annual rate: i_a = (1 + r/m)^m − 1 for nominal rate r compounded m times per year; continuous compounding gives i_a = e^r − 1.

  • Net present worth: NPW = Σ CF_t/(1 + i)^t; a project is acceptable when NPW ≥ 0 at the minimum attractive rate of return, and alternatives are compared by NPW at equal analysis periods.

  • Annual worth: AW = NPW·[i(1 + i)ⁿ/((1 + i)ⁿ − 1)]; for equal lives, maximizing AW is equivalent to maximizing NPW.

  • Straight-line depreciation: D = (B − S)/n per year, where B is first cost, S salvage value, and n recovery period; book value after t years = B − t·D.

  • MACRS uses 200% declining balance switching to straight line for 3-, 5-, 7-, and 10-year property and 150% declining balance for 15- and 20-year property, with the half-year convention unless otherwise elected.

  • Simple payback period is the time for cumulative undiscounted cash inflows to equal the initial investment; it ignores cash flows after payback and the time value of money.

  • Inflation: market (combined) rate i_f relates to real rate i_r and inflation f by (1 + i_f) = (1 + i_r)(1 + f); use constant-value dollars with the real rate for consistent analysis.

Quick reference

Ethics and Professional Practice

  • NSPE Fundamental Canons: hold paramount the safety, health, and welfare of the public; perform services only in areas of competence; issue public statements only in an objective and truthful manner.

  • Additional canons: act for each employer or client as faithful agents or trustees, avoid deceptive acts, and conduct themselves honorably and lawfully so as to enhance the honor, reputation, and usefulness of the profession.

  • Engineers may sign and seal only plans and documents they prepared or that were prepared under their direct supervisory control, and only within their competence.

  • Conflicts of interest, including financial interests in suppliers or contractors, must be disclosed to the client or employer; compensation from more than one party for the same service requires full disclosure and consent.

  • Confidential information of clients and employers may not be revealed without consent, except where required by law or where public safety is endangered.

  • Engineers shall not accept, directly or indirectly, any gift, gratuity, or compensation from contractors, suppliers, or parties dealing with the employer in connection with work for which the engineer is responsible.

  • The standard of care is that of a reasonably prudent engineer under similar circumstances; it is not a warranty of perfection, and negligence is judged against that professional standard.

  • When an engineer's judgment is overruled and public safety is endangered, the engineer must inform the employer or client and, if necessary, notify the appropriate authority.

  • Professional obligations attach to the individual licensee; a supervisor's approval or a company policy does not relieve an engineer of personal responsibility for sealed work.

Quick reference

Engineering Mechanics

  • Static equilibrium of a rigid body: ΣF = 0 and ΣM = 0 about any point; in two dimensions this yields three independent equations (ΣFx, ΣFy, ΣM).

  • Dry friction: static friction satisfies f_s ≤ μ_s·N, with impending motion at f_s = μ_s·N; kinetic friction is f_k = μ_k·N and μ_k is generally less than μ_s.

  • Normal and shear stress: σ = F/A perpendicular to the area; τ = V/A parallel to the area; average bearing stress uses the projected contact area.

  • Hooke's law for uniaxial loading: σ = Eε, and axial deformation δ = FL/(AE) for a prismatic, linearly elastic member.

  • Torsion of a circular shaft: τ_max = Tc/J, and the angle of twist θ = TL/(JG), where J = πd⁴/32 for a solid circular shaft.

  • Beam bending: σ = Mc/I with c the distance from the neutral axis; the elastic curve satisfies d²y/dx² = M/(EI).

  • Parallel axis theorem: I = I_c + A·d², where d is the perpendicular distance between the centroidal axis and the parallel axis of interest.

  • Trusses: analyze with the method of joints or sections. At a joint with only two non-collinear members and no load, both members are zero-force members.

  • Projectile motion with no drag: horizontal range = v²sin(2θ)/g, maximum height = v²sin²θ/(2g), and time of flight = 2v·sin θ/g for level ground.

Quick reference

Materials Science

  • Engineering stress-strain curve: the slope in the linear region is the elastic modulus E; the proportional limit marks the end of linearity, followed by yield, ultimate strength, and fracture.

  • Ductility is reported as percent elongation or percent reduction in area; a material with less than about 5% elongation is generally considered brittle.

  • Poisson's ratio ν = −ε_lateral/ε_axial; for isotropic materials −1 < ν ≤ 0.5, and most metals fall near 0.25 to 0.35.

  • Isotropic elastic constants: G = E/[2(1 + ν)] and K = E/[3(1 − 2ν)]; specifying any two determines the third along with the others.

  • Fatigue: repeated cycling below the yield strength can cause failure; steel exhibits an endurance limit, while aluminum and most nonferrous alloys do not.

  • Creep is time-dependent deformation under sustained stress, significant at temperatures above roughly 0.4 of the absolute melting temperature.

  • Phase diagrams: use the lever rule to find phase fractions, mass fraction of a phase = (length of tie-line segment opposite that phase)/(total tie-line length).

  • Heat treatment: rapid quenching of austenite forms hard, brittle martensite; tempering after quench reduces hardness and restores toughness.

  • Corrosion: in a galvanic couple the more anodic metal corrodes; cathodic protection supplies electrons with a sacrificial anode or an impressed current.

Quick reference

Fluid Mechanics

  • Continuity for steady incompressible flow: A₁V₁ = A₂V₂; in general mass flow ṁ = ρAV is conserved.

  • Bernoulli along a streamline (steady, incompressible, frictionless): P/γ + V²/(2g) + z = constant; add head-loss and pump-head terms for real systems.

  • Reynolds number Re = ρVD/μ = VD/ν; in pipe flow Re < 2100 is laminar, Re > 4000 is turbulent, and 2100–4000 is transitional.

  • Darcy-Weisbach head loss: h_f = f·(L/D)·(V²/2g), with f from the Moody chart using relative roughness ε/D and Reynolds number.

  • Laminar pipe flow (Hagen-Poiseuille): h_f = 32μLV/(γD²) and f = 64/Re, independent of roughness.

  • Hydrostatics: P = γh; the resultant force on a plane submerged surface is F = γ·h_c·A acting at the center of pressure below the centroid.

  • Buoyancy: F_b = γ·V_displaced by Archimedes' principle; a floating body displaces its own weight in fluid.

  • Minor losses: h_m = K·V²/(2g), with K depending on the fitting, valve, or entrance/exit geometry.

  • Pump power required: P = γQH/η, where H is the total head added, Q the volume flow rate, and η the pump efficiency.

Quick reference

Thermodynamics

  • First law for a closed system: Q − W = ΔU; for a quasi-equilibrium process the boundary work is W = ∫P dV.

  • Ideal gas: PV = nRT with R = 8.314 J/(mol·K) or PV = mRT with R specific to the gas; also c_p − c_v = R and k = c_p/c_v.

  • Steady-flow energy equation: Q̇ − Ẇ = ṁ[(h₂ − h₁) + (V₂² − V₁²)/2 + g(z₂ − z₁)].

  • Second law: no heat engine operating between reservoirs at T_H and T_L can exceed the Carnot efficiency η = 1 − T_L/T_H, with absolute temperatures.

  • Entropy: ΔS = ∫δQ_rev/T, and the entropy change of an isolated system (ΔS_universe) must be greater than or equal to zero.

  • Refrigerators and heat pumps: COP_R = Q_L/W_in, COP_HP = Q_H/W_in, and COP_HP = COP_R + 1 for the same cycle.

  • Isentropic ideal-gas relations: T₂/T₁ = (P₂/P₁)^((k−1)/k) = (v₁/v₂)^(k−1), and Pv^k = constant.

  • Saturated mixture properties: quality x = (v − v_f)/(v_g − v_f), and h = h_f + x·h_fg; quality is undefined in the compressed-liquid and superheated-vapor regions.

Quick reference

Electrical and Computer Engineering

  • Ohm's law V = IR and power P = VI = I²R = V²/R; resistive elements convert electrical energy to heat.

  • Kirchhoff's laws: KCL states the algebraic sum of currents at a node is zero; KVL states the algebraic sum of voltages around a closed loop is zero.

  • Series resistances add directly, R_eq = ΣRᵢ; parallel resistances combine as 1/R_eq = Σ(1/Rᵢ).

  • Thevenin's theorem: any linear two-terminal network equals a voltage source V_th (open-circuit voltage) in series with R_th, the resistance seen with independent sources deactivated.

  • Capacitors: i = C·dv/dt with impedance 1/(jωC); inductors: v = L·di/dt with impedance jωL. Time constants are τ = RC and τ = L/R.

  • Steady-state sinusoidal quantities: V_rms = V_peak/√2; complex power S = V·I* = P + jQ, with power factor cos θ equal to P/|S|.

  • Balanced three-phase power: P = √3·V_L·I_L·cos θ, where V_L and I_L are line quantities and θ is the phase angle between phase voltage and phase current.

  • Ideal transformer: V₁/V₂ = N₁/N₂ and I₁/I₂ = N₂/N₁, with input apparent power equal to output apparent power.

  • Digital logic: NAND and NOR gates are functionally complete; De Morgan's laws state (A·B)' = A' + B' and (A + B)' = A'·B'.

Quick reference

Safety, Health, and Environment

  • Hierarchy of controls, most to least effective: elimination, substitution, engineering controls, administrative controls, then personal protective equipment.

  • OSHA noise: permissible exposure limit 90 dBA as an 8-hour time-weighted average, action level 85 dBA, and a 5 dB exchange rate (each 5 dB increase halves allowable exposure time).

  • Decibel arithmetic: doubling the number of identical sound sources increases the level by about 3 dB; adding a source 10 dB lower changes the total by only about 0.4 dB.

  • Flammability: a vapor-air mixture burns only between its lower and upper explosive limits; below the LEL the mixture is too lean, above the UEL too rich.

  • Fall protection thresholds: 4 ft in general industry, 6 ft in construction, and 10 ft for scaffolding, with guardrails, nets, or personal fall-arrest systems.

  • Permit-required confined spaces have a hazardous atmosphere, engulfment potential, or other serious hazards; entry requires atmospheric testing, isolation, and an attendant.

  • Exposure limits: TLV-TWA is an 8-hour average, TLV-STEL a 15-minute average, and TLV-C a ceiling that must never be exceeded; IDLH means immediate danger to life or health.

  • Environmental statutes: the Clean Air Act regulates emissions, the Clean Water Act regulates discharges through NPDES permits, and RCRA governs hazardous waste handling.

  • Hazard communication requires labels, safety data sheets, and training for each hazardous chemical in the workplace; lockout/tagout controls hazardous energy during servicing.

FE Exam key terms

Eigenvalue

A scalar that, when a square matrix multiplies a particular nonzero vector, produces the same result as multiplying that vector by the scalar. It identifies directions a linear transformation only stretches or shrinks.

Related: Partial derivative
Partial derivative

The rate of change of a function of several variables taken with respect to one variable while the others are held constant. It underlies optimization, error propagation, and multivariable rate problems.

Related: Eigenvalue
Taylor series

An expansion that writes a smooth function as an infinite sum of terms built from its derivatives at a single point. Truncated versions supply the linear and quadratic approximations used in analysis.

Trapezoidal rule

A numerical integration method that approximates the area under a curve by joining sample points with straight segments and summing the resulting trapezoids. Accuracy improves as the interval width decreases.

Related: Taylor series
Central limit theorem

A result stating that the mean of many independent random variables tends toward a normal distribution regardless of the underlying distribution, justifying normal-based confidence intervals and control charts.

Related: Confidence interval
Confidence interval

A range computed from sample data that is expected to contain the true population parameter with a stated probability. Its width narrows as sample size grows or variability falls.

Related: Central limit theorem
Type I error

Rejecting a null hypothesis that is actually true, commonly called a false positive. Its probability equals the significance level, alpha, chosen by the analyst before testing.

Related: Confidence interval
Present worth

The equivalent value today of a stream of future cash flows, obtained by discounting each flow at the minimum attractive rate of return. It lets alternatives be compared on a common time basis.

Related: Minimum attractive rate of return (MARR), Capitalized cost
Internal rate of return

The discount rate at which a project's net present value equals zero. An investment is acceptable when this rate exceeds the minimum attractive rate of return.

Related: Present worth, Minimum attractive rate of return (MARR)
Capitalized cost

The present worth of a project assumed to last indefinitely, computed as the initial cost plus the present worth of a repeating annual cost divided by the interest rate.

Related: Present worth
Minimum attractive rate of return (MARR)

The lowest rate of return a firm will accept before committing funds to a project. It reflects the cost of capital plus a margin for the risk of the investment.

Related: Internal rate of return, Present worth
Conflict of interest

A circumstance in which an engineer's financial, personal, or other interest could improperly influence professional judgment, or could appear to do so. It must be disclosed or avoided.

Related: Standard of care
Responsible charge

Direct control and personal supervision of engineering work by a licensed professional who reviews the design decisions and accepts accountability for the work of subordinates.

Related: Standard of care
Whistleblowing

Reporting an employer's or client's illegal, unsafe, or unethical conduct to an authority or the public, typically after internal channels fail. Many jurisdictions protect it when public safety is at stake.

Related: Conflict of interest
Standard of care

The degree of care and skill a reasonable, prudent engineer with similar training would exercise under comparable circumstances. It is the benchmark used when judging negligence claims.

Related: Responsible charge, Conflict of interest
Free-body diagram

A sketch of a body isolated from its surroundings that shows every applied force, moment, and support reaction acting on it, used to write equilibrium equations.

Related: Statically indeterminate, Factor of safety
Factor of safety

The ratio of a member's or material's capacity, such as yield or ultimate strength, to the load or stress expected in service. Values above one indicate margin against failure.

Related: Yield strength, Free-body diagram
Moment of inertia

A geometric property describing how an area's points are distributed about an axis. It quantifies resistance to bending, so a larger value corresponds to a stiffer beam.

Related: Free-body diagram
Statically indeterminate

Describing a structure or member with more unknown reactions than independent equilibrium equations, so compatibility of deformations or member stiffness must be used to solve for the forces.

Related: Free-body diagram
Yield strength

The stress at which a material begins to deform permanently, marking the end of elastic behavior on a stress-strain curve. It is often estimated by the 0.2 percent offset method.

Related: Fatigue, Factor of safety
Fatigue

Progressive failure of a material subjected to repeated or fluctuating stress cycles at levels below its static strength, usually beginning at a stress concentration or existing flaw.

Related: Yield strength, Creep
Creep

Time-dependent permanent deformation of a material held under constant stress. It becomes significant at elevated temperature and, for some polymers, even at room temperature.

Related: Fatigue
Phase diagram

A chart showing which phases of a material system are stable as functions of temperature, composition, and sometimes pressure. It guides alloy design and heat-treatment selection.

Related: Yield strength
Reynolds number

A dimensionless ratio of inertial forces to viscous forces in a flow. It indicates whether flow is laminar or turbulent and governs which friction correlation applies.

Related: Viscosity, Bernoulli equation
Bernoulli equation

An energy relation for steady, incompressible, frictionless flow along a streamline: the sum of pressure head, velocity head, and elevation head remains constant.

Related: Cavitation, Reynolds number
Viscosity

A fluid property measuring internal friction, that is, resistance of adjacent fluid layers to sliding past one another. Higher values mean greater resistance to flow and larger pressure losses.

Related: Reynolds number
Cavitation

Formation and violent collapse of vapor bubbles in a liquid where local pressure falls below vapor pressure, producing noise, vibration, and surface erosion in pumps, valves, and propellers.

Related: Bernoulli equation
First law of thermodynamics

The principle of energy conservation applied to a system: heat transferred in equals the change in stored energy plus the work done by the system.

Related: Enthalpy, Entropy
Entropy

A thermodynamic property measuring how dispersed energy is and how irreversible a process is. It increases for an isolated system whenever a real process takes place.

Related: First law of thermodynamics, Carnot efficiency
Carnot efficiency

The maximum thermal efficiency any heat engine can achieve between two reservoirs: one minus the ratio of the colder absolute temperature to the hotter one.

Related: Entropy
Enthalpy

A composite property equal to internal energy plus the product of pressure and volume. It is convenient for analyzing flow devices and constant-pressure heating processes.

Related: First law of thermodynamics
Kirchhoff's laws

Two circuit rules: currents entering a node sum to zero, and the voltage rises and drops around any closed loop sum to zero.

Related: Thevenin equivalent, Impedance
Thevenin equivalent

A replacement of a linear two-terminal network by one voltage source in series with one resistance, which produces the same response for any load connected to those terminals.

Related: Kirchhoff's laws
Power factor

The ratio of real power to apparent power in an alternating-current circuit, numerically equal to the cosine of the phase angle between voltage and current.

Related: Impedance
Impedance

The complex ratio of voltage to current in an alternating-current circuit, combining resistance and reactance and carrying both magnitude and phase information.

Related: Power factor, Kirchhoff's laws
Hierarchy of controls

A ranking of hazard controls by effectiveness, from elimination and substitution through engineering controls and administrative controls down to personal protective equipment.

Related: Permissible exposure limit (PEL)
Permissible exposure limit (PEL)

A regulatory ceiling on the concentration of a substance in workplace air, averaged over a stated period, to which a worker may lawfully be exposed.

Related: Hierarchy of controls
Lockout/tagout

A procedure that isolates and de-energizes equipment and attaches locks and warning tags so machinery cannot be started while servicing or maintenance is under way.

Related: Hierarchy of controls

FE Exam study plan

8 weeks · About 7 hours per week

Week 1

Mathematics

  • Solve 40 mixed algebra, trigonometry, and analytic geometry problems without a calculator shortcut sheet

  • Differentiate and integrate 20 functions covering product, quotient, chain, and integration-by-parts rules

  • Compute areas, centroids, and volumes of revolution for 8 plane and solid regions

  • Apply vector dot and cross products to 10 force, work, and moment problems

  • Solve 10 first-order and second-order linear differential equations with given initial conditions

Your checkpoint

A closed-book 35-question Mathematics timed set (60 min) scored at 80% or above, with every miss reworked in writing.

Week 2

Probability and Statistics & Mathematics

  • Compute descriptive statistics (mean, median, mode, variance, standard deviation) for 8 raw data sets

  • Apply binomial, Poisson, and normal distributions to 20 word problems and read z-tables and t-tables fluently

  • Construct 10 confidence intervals and perform 10 one- and two-sample hypothesis tests at stated significance levels

  • Fit a least-squares linear regression and interpret slope, intercept, and coefficient of determination for 5 data sets

  • Re-solve the 10 highest-error items from the Week 1 Mathematics set

Your checkpoint

A one-page handwritten formula card plus a 30-question Probability & Statistics set with all hypothesis-test conclusions stated in engineering language.

Week 3

Engineering Mechanics

  • Draw complete free-body diagrams and solve equilibrium for 15 statics systems including trusses, frames, and friction

  • Locate centroids and moments of inertia for 8 composite cross sections

  • Solve 12 kinematics and kinetics problems using Newton's second law, work-energy, and impulse-momentum

  • Compute stresses in axial, torsional, and bending members for 10 simple load cases

  • Work 8 circular-motion and projectile problems to a numeric answer with units checked

Your checkpoint

A 25-problem Mechanics solution packet where every problem shows a labeled free-body diagram or an explicitly stated governing equation.

Week 4

Fluid Mechanics

  • Convert and manipulate fluid properties (density, specific weight, viscosity, surface tension) across 15 unit-conversion problems

  • Apply the continuity and Bernoulli equations to 15 pipe and nozzle systems, including head loss terms

  • Compute Reynolds number and classify flow, then size a pipe for a target velocity in 6 design scenarios

  • Solve 8 hydrostatic pressure and submerged-gate force problems

  • Derive and apply the Darcy-Weisbach equation to 6 pipe-flow friction problems

Your checkpoint

Midpoint checkpoint: a 40-question mixed set drawn from Domains 1, 2, 5, and 7, completed in one 2-hour sitting with a written error log by domain.

Week 5

Thermodynamics

  • Apply the first law of thermodynamics to 12 closed-system and 10 open-system (steady-flow) control volumes

  • Evaluate ideal-gas processes (isothermal, isobaric, isochoric, adiabatic) for 10 cycles and compute work and heat

  • Compute entropy change for 8 reversible and irreversible processes and state whether each violates the second law

  • Determine thermal efficiency and coefficient of performance for 6 Rankine, Brayton, and refrigeration cycles

  • Solve 8 heat-transfer problems spanning conduction, convection, and radiation

Your checkpoint

A completed property and cycle diagram packet (T-s and P-v sketches for each of the 6 cycles) plus a 25-question Thermodynamics set at 75% or above.

Week 6

Electrical and Computer Engineering & Materials Science

  • Solve 12 DC and AC circuit problems using Ohm's law, Kirchhoff's laws, series-parallel reduction, and Thevenin equivalents

  • Compute power, impedance, and phase relationships in 8 RLC and three-phase circuits

  • Convert between number systems and evaluate 10 Boolean expressions using truth tables and Karnaugh maps

  • Classify 15 material properties (elastic modulus, yield strength, hardness, ductility, thermal conductivity) and match them to design requirements

  • Interpret a phase diagram and a stress-strain curve in 8 reading-comprehension items

  • Identify the dominant corrosion and failure modes in 6 described service scenarios

Your checkpoint

A single reference sheet covering circuits plus materials with 20 worked examples, and a 30-question combined set at 75% or above.

Week 7

Engineering Economics & Ethics and Professional Practice

  • Compute present worth, future worth, and annual worth for 12 cash-flow scenarios using the standard factor tables

  • Calculate rate of return, payback period, and benefit-cost ratio for 6 project alternatives and select the better one

  • Determine depreciation and after-tax cash flow for 5 asset scenarios under straight-line and MACRS

  • Apply the ASCE/NSPE canons to classify 15 short ethics scenarios as ethical, unethical, or ambiguous, citing the governing canon

  • Write a 150-word response to one ambiguous conflict-of-interest scenario using the Code of Ethics as the sole authority

Your checkpoint

An economics worked-problem set of 20 items plus a written ethics case analysis (one page) that names the specific canon applied at each decision point.

Week 8

Safety, Health, and Environment & Ethics and Professional Practice

  • Identify hazard categories, exposure routes, and required controls for 15 workplace scenarios using the hierarchy of controls

  • Apply OSHA recordkeeping, permissible exposure limit, and lockout/tagout concepts to 10 compliance questions

  • Select the correct personal protective equipment and confined-space or fall-protection procedure for 8 described tasks

  • Assemble a cumulative one-page master formula and reference sheet spanning all ten domains

  • Re-solve all previously logged error items across the eight weeks

Your checkpoint

Full-length timed practice exam completed in one sitting with a scored breakdown by domain and a written remediation list for any domain below 70%.

Milestones

Week 2: Mathematics timed set scored at 80% or above and the Probability & Statistics set completed, with a formula card in hand.

Week 4: Midpoint 40-question mixed set (Domains 1, 2, 5, 7) completed under a 2-hour time limit; every domain in that set at 65% or above.

Week 6: All of Domains 1, 2, 5, 7, 8, 9, and 6 have at least one scored practice set on record, and the combined Week 6 set is at 75% or above.

Week 8: Full-length practice exam finished, all ten domains scored and recorded, and no domain below 70%; any domain below 70% has a scheduled retake date before exam day.

FE Exam exam day

Your checklist

Valid, unexpired government-issued photo ID with your signature

Your first and last name on the ID must match your registration exactly. A driver's license or passport generally fits this requirement; check the provider's accepted-ID list if you plan to use something unusual.

Appointment confirmation details (date, time, test center address)

Have the confirmation saved or printed as directed by the provider. Whether a printed copy is required at the door varies by test center - confirm with the provider.

An approved calculator, verified against the current official list

Only specific models from a published approved list may be used, and no case or loose notes may accompany it. Approved-model lists change over time, so verify your exact model number on the provider's site the week of your exam.

A plan for personal items (phone, wallet, notes, watch)

Personal items are not permitted at the workstation and are typically stored in a provided locker. Expect to empty pockets and possibly be wanded or patted down.

No personal reference book, formula sheets, or printed notes

The exam supplies its own reference material on screen. Bringing your own copy into the test room is a violation. Study the on-screen version and its search function before test day.

Snack and water to leave in your locker

You can usually access the locker during the scheduled break, but not at the workstation.

Arrival plan with buffer time

Arrive well before your appointment - many centers recommend 30 minutes - to complete check-in without cutting into exam time. Confirm the center's specific arrival guidance with the provider.

Transportation, parking, and route confirmed

Do a dry run or check traffic and parking options the day before. An unfamiliar test center is a common cause of late arrival.

Dry-run practice with the on-screen handbook and calculator interface

Do at least one full timed practice session using only the digital reference and an approved calculator, so the interface feels routine on exam day.

A realistic pacing plan (questions per section, checkpoint times)

Know roughly how many minutes per question you can afford and which questions you will flag and return to rather than fight.

Review the candidate agreement / nondisclosure terms in advance

You will accept terms covering exam confidentiality at the workstation. Understand what that means regarding discussing exam content afterward.

Emergency contact and center phone number saved

If something goes wrong (illness, car trouble), call the test center or provider as early as possible; there may be reschedule options with fees or deadlines - confirm the policy with the provider.

Plan the day

72 hours before

Stop learning new material. Do one final timed practice session under exam-like conditions (approved calculator only, on-screen reference, no phone), then switch to light review of your own error log and formula-index locations in the digital handbook. Confirm your appointment time, test center address, and ID validity. Protect sleep - do not trade it for extra cramming.

48 hours before

Rehearse the on-screen reference handbook: practice locating key tables, unit conversions, and material properties quickly by search. Verify your calculator model against the current approved list and test the batteries. Prepare clothes in layers, since room temperature varies.

24 hours before

Pack your ID, calculator, confirmation, snack, and directions. Lay out clothes. Do a light 30-45 minute review of high-yield topics only - no new problem types. Eat a normal dinner, avoid heavy alcohol, and set two alarms. Aim for a full night's sleep; a late-night study session costs more than it gains.

Morning of

Eat a normal breakfast you tolerate well and hydrate modestly. Arrive at the center with buffer time, bring only what the provider permits, and expect ID check, a photo, a palm/vein scan or similar, and locker storage. Use the restroom before you sit down. At the workstation, take your time with the tutorial and the reference handbook orientation, and budget a minute to write down your pacing checkpoints on your scratch material.

During the test - first section

Work steadily; every question counts equally, and there is no penalty for a wrong answer, so never leave a blank if time is short. Do easy questions first within the section, flag hard ones, and return. Watch your checkpoint times rather than the clock per question. Verify units before selecting an answer - many distractors are unit errors.

During the scheduled break

Take it. Stand, move, drink water, eat a small snack, and use the restroom. Do not review exam content with anyone or scribble notes. During the break the clock generally stops, but unscheduled breaks usually do not stop the clock - confirm the rule with the provider before you rely on it.

During the test - second section

Expect to be unable to return to questions from the first section, so do not carry regret forward. Reset pacing, keep flagging and returning, and guard the final ten minutes for a scan of unanswered or flagged items. Answer everything before you submit.

After the exam

Note how you feel but avoid dissecting questions with other candidates - confidentiality terms apply. Results are typically released electronically by the provider after a processing period; confirm the expected timeline and how to access your score report in your account.

Rules to check

  • Bring the exact form of ID the provider specifies. It must be current, government-issued, and show a photo and your signature, with your name matching your registration. A mismatched or expired ID can bar you from testing and may forfeit your fee.

  • Only an approved calculator model is allowed, without case, cover, or notes. Center staff may inspect or swap it. Using an unapproved device is a testing-integrity violation.

  • Reference material, formula sheets, and your own notes are not permitted in the test room; use only the reference material supplied within the exam interface. Cell phones and smart devices must be silenced and stored, not merely pocketed.

  • You will accept a confidentiality/nondisclosure agreement before testing. Do not reproduce, discuss, or share exam content afterward in any form, including online forums.

  • The exam is scored on total correct answers across both sections with no penalty for guessing, so answer every question. The passing standard is set by the provider; do not attempt to convert a raw practice score into a predicted pass/fail.

  • You cannot return to a completed section once you have moved on, so resolve flagged items within each section before you submit it. Confirm the exact review-and-submit behavior with the provider, since interface details change.

  • The scheduled break is optional but recommended; unscheduled breaks may be permitted but typically do not stop your exam clock. Confirm the break policy, and what is allowed at the workstation, with the provider before test day.

  • Testing irregularities - leaving the camera view, accessing unauthorized materials, or disruptive behavior - can result in score cancellation. If a technical problem occurs, stop and raise your hand immediately so it is documented before you continue.

FE Exam FAQ

How many FE Exam practice questions are available?

The practice set has 200 FE Exam questions. Each one includes the choices, the correct answer, and an explanation, and the set is free to read with no signup.

How many FE Exam flashcards are available?

The flashcard set has 32 FE Exam cards. Each card shows the term and its definition.

Which topics does the FE Exam study material cover?

The FE Exam study material has 10 sections, including Mathematics, Probability and Statistics, and Engineering Economics.

What format facts does the catalog list for the FE Exam exam?

The catalog lists a duration of 320 minutes and these item types: computer-based for the FE Exam exam.