ARRT Radiography Practice Test

ARRT Radiography Certification and Registration Examination

ARRT Radiography overview

  • 200 practice questions
  • 32 flashcards
  • 5 study guide topics
  • 37 key terms

What you'll study

  • Patient Care and Education20%
  • Image Production - Equipment and Image Acquisition20%
  • Image Production - Image Evaluation20%
  • Procedures20%
  • Radiation Protection20%

ARRT certification and registration in Radiography is a credential that, in ARRT's words, "recognize[s] individuals who are qualified to perform the role of a radiographer." Most radiologic technologists enter the profession through this discipline, producing images of patients' internal organs, soft tissues, and bones with X-ray equipment and assisting radiologists with procedures such as fluoroscopic imaging or gastrointestinal exams that use contrast media. It is intended for students graduating from a recognized educational program in radiography who apply through ARRT's primary eligibility pathway, and it is distinct from state licensure, which is handled separately. Earning the credential requires meeting requirements in three areas: education, ethics, and examination. ARRT publishes three documents that define the exam and the training behind it - the Didactic and Clinical Competency Requirements, the Examination Content Specifications, and the Task Inventory - with a version "through February 28, 2027" and a revised version "effective March 1, 2027" for each. To prepare, read all three documents, confirm which version applies to your test date, review the application overview and primary eligibility pathway handbook, and build a study plan around the topic outline in the content specifications rather than around question banks alone.

Common mistakes

When a scenario describes a patient with a specific communication barrier (deaf, aphasic, non-English speaking, visually impaired, pediatric), the candidate answers by picking the technique used for a different barrier - e.g., choosing 'speak louder and slower' or 'use a sign language interpreter' for an aphasic patient who cannot produce or comprehend language.

Communication adaptations are studied as a flat bullet list ('speak clearly, use an interpreter, use written instructions') so nothing links each technique to the impairment it actually solves; under time pressure the most familiar-sounding option wins.

What to do instead

Build a 5x5 grid: barrier down the side, accommodation across the top, and be able to justify one cell for each pair. Anchor rules: aphasic = yes/no and picture boards, not written sentences; deaf = written instructions or interpreter, not shouting; non-English = trained medical interpreter, not a family member; visually impaired = verbal description and physical guidance; pediatric = explain at the child's level plus prepare the caregiver.

On a contrast reaction item, the candidate selects a drug (diphenhydramine, epinephrine) or a diagnostic step (get a repeat image) as the first action, or assigns a moderate reaction (hives, mild bronchospasm) to the severe category that requires emergency resuscitation.

Reaction categories are memorized as symptom lists without a matching action ladder, so the first-response ordering (stop, assess ABCs, call for help, then per protocol) is never rehearsed.

What to do instead

Practice a three-column table - mild / moderate / severe - with symptoms and first action in each row. Lock in the first action for every reaction: stop the injection and assess airway, breathing, circulation before any drug. Note that urticaria and mild nausea are mild; facial/laryngeal edema and hypotension are severe.

Applying the 15% rule or the exposure maintenance formula with the operation reversed - dividing mAs when distance increases, or doubling mAs when kVp is raised.

Both rules are memorized as sentence fragments ('kVp up, mAs down') without the direction of the trade-off, and the squared distance term invites inverting the ratio.

What to do instead

Rehearse with numbers: distance doubled -> mAs x4 (mAs2 = mAs1 x (D2/D1)^2); kVp +15% -> mAs halved, receptor exposure held constant, contrast reduced. Always write the ratio with the new value on top and check whether the answer moves in the direction physics demands (more distance must mean more mAs).

Placing the thicker or denser part of the anatomy under the anode side of the tube, or misstating which end of the tube is the cathode when predicting the heel effect.

The heel effect is learned as a definition ('x-rays are more intense toward the cathode') without a body-positioning application, and the anode/cathode ends of the housing look interchangeable on a diagram.

What to do instead

Use one anchor phrase - 'cathode to the thick part' - and immediately apply it in three settings: AP thoracic spine and femur (thicker hip toward cathode), and mammography (chest wall toward cathode). Recall that the anode is the positive, angled, rotating disc side, so the intensity falls off on the anode side.

Changing grid ratio, grid frequency, or adding/removing a grid without compensating mAs, or compensating with kVp instead of mAs.

Grids are filed under 'scatter and contrast' while mAs compensation lives under 'exposure math,' so the two facts are never linked; conversion factors are memorized as bare numbers with no unit attached.

What to do instead

Memorize the grid conversion factor ladder (no grid 1, 5:1 = 2, 6:1 = 3, 8:1 = 4, 12:1 = 5, 16:1 = 6) and make the rule explicit: a grid change is an exposure change, so mAs is multiplied by the new CF divided by the old CF. Contrast and scatter are the kVp-adjacent effects; receptor exposure is the mAs effect.

Treating a high exposure indicator as a good image, or reading a deviation index as a measure of patient dose rather than of receptor exposure relative to the target.

Film-era thinking carries over - darker used to mean more exposure and was visible; in digital, brightness is processed away, so the candidate has no visual cue and substitutes a feeling for the number.

What to do instead

Fix three facts: DI is 10 log(EI/target EI), so DI +3 is roughly double the target receptor exposure and DI -3 is roughly half; +/-3 is the accepted working range, with a consistent trend outside it requiring a technique or processor check; DI reflects receptor exposure, not absorbed dose to the patient. When an item shows a DI outside range, the answer is correction of technique, not acceptance.

Misdiagnosing grid errors - calling a uniform loss of brightness across the whole image 'off-center grid,' or calling a one-sided loss 'off-level' - and confusing grid cutoff with motion, aliasing, or improper collimation.

The three grid errors are taught together with the same phrase ('loss of density') and are never separated by the pattern's geometry, which is the only feature that distinguishes them.

What to do instead

Learn the patterns as a set: off-level (tilted grid) = uniform loss over the entire image; lateral decentering = loss on one side, increasing toward that edge; focus-grid distance outside the focal range = loss at both lateral edges with a properly exposed center. Then rule out motion (blur, not brightness) and aliasing (moiré pattern from a grid frequency conflict).

Mixing up which projection demonstrates which structure - e.g., naming Caldwell when asked for the projection that best shows the maxillary sinuses, or Waters when asked for the orbits - and confusing PA-axial, AP-axial, and Townes projections of the skull.

Projections are memorized as a list of named positions attached to a body part, not as an answer to 'what does this projection free up or superimpose?' so similar-sounding eponyms blur together.

What to do instead

Pair every projection with the single structure it is best for: Waters = maxillary sinuses and facial bones; Caldwell = orbits and frontal sinus; SMV/submentovertex = zygomatic arches; Townes = occipital bone and dorsum sellae; PA axial (Haas) = occipital bone and foramen magnum. Drill the pairing in both directions (structure -> projection and projection -> structure).

Mixing dose-limit units and qualifiers - quoting the public limit as the occupational limit, giving the fetal limit as a total-pregnancy figure with no monthly qualifier, or stating a value in mSv when the question supplies rem (or the reverse).

The limits are studied as a number table without units or time bases attached, and the arithmetic conversion (1 rem = 10 mSv) is never practiced, so plausible-looking numbers cannot be screened out.

What to do instead

Store every limit as value + unit + time base in one line: occupational effective 50 mSv (5 rem)/yr; lens 150 mSv (15 rem)/yr on older NCRP guidance (newer guidance is lower - check the standard the exam cites); extremities/skin 500 mSv (50 rem)/yr; fetus 0.5 mSv (0.05 rem)/month and 5 mSv (0.5 rem) total gestation; public 1 mSv (0.1 rem)/yr. On any item, first circle the unit and the time base, then compare.

Choosing a patient-dose-reduction action that actually does nothing for the tissue in the beam - e.g., claiming gonadal shielding or tighter collimation lowers the dose to the anatomy being irradiated, or claiming that added filtration raises receptor exposure.

Dose-reduction tools are memorized as a list of 'good things' with no mechanism attached, so the candidate cannot tell which part of the dose each one removes.

What to do instead

Attach a mechanism to each tool: collimation reduces the volume irradiated and the scatter reaching the IR, but not the dose to tissue inside the field; gonadal shielding attenuates the primary beam to shielded tissue only and must never obscure essential anatomy; filtration removes low-energy photons, hardening the beam and raising HVL while lowering patient dose and (all else equal) receptor exposure; distance reduces exposure by the inverse square. Match the mechanism to the wording of the stem before selecting.

Exam requirements can change. Confirm current details with the exam provider.

ARRT Radiography practice

200 questions. Each one lists the choices, the correct answer, and an explanation. With JavaScript, this list opens one question at a time. The checker at the top of this page saves progress in this browser when it is available.

  1. Question 1Patient Care and Education

    Which combination of identifiers is acceptable when confirming a patient's identity before an imaging procedure?

    1. The patient's age and current diagnosis
    2. The room number and bed assignment
    3. The examination ordered and the time scheduled
    4. The patient's full name and date of birth Correct answer.

    Explanation

    Institutional policy requires at least two identifiers, and the patient's own verbal statement of name plus a second identifier such as date of birth or medical record number is standard. Identifiers must be tied to the individual, not to a location, diagnosis, or schedule. The patient should state the information when possible rather than simply agreeing to a name read aloud.

  2. Question 2Patient Care and Education

    When should a radiographer perform hand hygiene?

    1. Only when the hands are visibly soiled
    2. Before and after each patient contact Correct answer.
    3. Only after contact with blood or body fluids
    4. Only before invasive procedures

    Explanation

    Hand hygiene is the single most effective way to prevent transmission of microorganisms and is required before and after every patient contact and after glove removal. Alcohol-based rub or soap and water is used even when gloves were worn, because gloves can have small defects and contamination occurs during removal. Visible soiling specifically requires soap and water rather than alcohol rub.

  3. Question 3Patient Care and Education

    Which range represents a normal resting respiratory rate for an adult?

    1. 8 to 11 breaths per minute
    2. 12 to 20 breaths per minute Correct answer.
    3. 24 to 30 breaths per minute
    4. 4 to 8 breaths per minute

    Explanation

    A normal adult respiratory rate is approximately 12 to 20 breaths per minute. Rates below 12 indicate bradypnea and rates above 20 indicate tachypnea, either of which should be reported before starting or continuing a procedure. Respiratory rate is counted for a full 60 seconds because irregular breathing is easily missed with shorter counts.

  4. Question 4Patient Care and Education

    Before assisting a patient from a wheelchair onto the radiographic table, the radiographer should:

    1. Ask the patient to stand while the brakes are still released
    2. Lock the brakes and swing the footrests to the side Correct answer.
    3. Tilt the chair back so the front wheels lift off the floor
    4. Leave the footrests down so the patient can push off them

    Explanation

    Locking the wheels prevents the chair from rolling as the patient shifts weight, and moving the footrests aside clears the path for the feet and avoids tripping. The chair should be positioned parallel and as close to the table as possible. A gait belt is used for patients who are unsteady.

  5. Question 5Patient Care and Education

    Which action best protects the radiographer's back when moving a patient?

    1. Twisting the trunk while lifting
    2. Bending at the waist to reach the patient
    3. Holding the patient at arm's length
    4. Keeping the patient close to the body Correct answer.

    Explanation

    Holding the load close to the body shortens the lever arm and reduces the compressive force on the lumbar spine. The worker should bend at the knees and hips, keep the trunk upright, and avoid twisting while loaded. Wide, stable footing and assistance or a lift device should be used whenever the load exceeds safe limits.

  6. Question 6Patient Care and Education

    Which technique best confirms that a patient understands preprocedure instructions?

    1. Asking whether the patient has any questions
    2. Having the patient restate the instructions Correct answer.
    3. Speaking slowly and loudly to the patient
    4. Giving a written brochure at the end of the visit

    Explanation

    Teach-back, in which the patient explains the instructions in their own words, reveals gaps in understanding that a yes or no question will miss. Patients frequently say they understand out of politeness. Written material supplements but does not replace verification of comprehension.

  7. Question 7Patient Care and Education

    A 3-year-old child is scheduled for an abdominal radiograph. Which approach is most appropriate?

    1. Having the parent leave the room to limit distraction
    2. Explaining the procedure using correct medical terminology
    3. Letting a parent stay close and using simple, concrete words Correct answer.
    4. Requiring the child to lie still without any assistance

    Explanation

    Preschool children think literally and respond to short, concrete explanations, and a familiar caregiver nearby reduces fear and improves cooperation. Immobilization devices and a short exposure time compensate for limited ability to hold still. Medical terminology and separation from the parent increase distress.

  8. Question 8Patient Care and Education

    A patient's coworker telephones the department and asks about the patient's examination results. What is the appropriate response?

    1. Referring the caller to the radiologist's personal telephone
    2. Confirming whether the patient is currently in the department
    3. Giving the results if the caller says he is a family member
    4. Explaining that patient information cannot be released Correct answer.

    Explanation

    Protected health information may be shared only with those involved in the patient's care or as authorized in writing by the patient. Even confirming that a person is present in the facility discloses protected information. The caller should be told that details cannot be discussed and directed to the patient or the ordering provider.

  9. Question 9Patient Care and Education

    Which action is the radiographer's responsibility regarding informed consent for a contrast procedure?

    1. Judging whether the patient is competent to give consent
    2. Explaining the risks and benefits and obtaining the signature
    3. Witnessing the signature only when a family member asks
    4. Confirming that a signed consent form is in the record Correct answer.

    Explanation

    Obtaining informed consent, including the discussion of risks, benefits, and alternatives, is the responsibility of the physician who will perform the procedure. The radiographer verifies that consent has been obtained and documented and may witness the patient's signature. Determining competence and disclosing procedural risk fall outside the radiographer's scope.

  10. Question 10Patient Care and Education

    Which precaution is required in an area where a patient is receiving oxygen by nasal cannula?

    1. Removing smoking materials and open flames from the room Correct answer.
    2. Grounding all electrical equipment to the oxygen cylinder
    3. Storing the cylinder flat on the floor beside the patient
    4. Lubricating the regulator fittings with an oil-based gel

    Explanation

    Oxygen supports combustion, so open flames, smoking materials, and spark-producing devices must be kept away from the patient and the equipment. Cylinders must be secured upright, not left lying on the floor. Oil and grease must never contact oxygen fittings because they can ignite.

  11. Question 11Patient Care and Education

    A patient becomes pale and diaphoretic with a falling blood pressure after standing. Which position is most appropriate?

    1. Prone with the head turned to the side
    2. Seated upright with the feet dependent
    3. Side-lying with the head lowered below the hips
    4. Supine with the legs elevated Correct answer.

    Explanation

    Supine positioning with the legs elevated promotes venous return to the heart and brain and is the standard response to a hypotensive or presyncopal episode. Vital signs are reassessed and the event is reported. The patient is not allowed to stand again until stable, and a safe transport method is arranged.

  12. Question 12Patient Care and Education

    Which practice is required when imaging a patient in protective (reverse) isolation?

    1. Wearing a mask on entry and keeping the door closed Correct answer.
    2. Allowing visitors with colds to enter if they wear a mask
    3. Reusing disposable supplies between visits to save cost
    4. Wearing gloves only when touching the patient's skin

    Explanation

    Protective isolation shields an immunocompromised patient from organisms carried by staff, visitors, and the environment. Staff wear a mask on entry, perform hand hygiene, and use dedicated equipment, and the door stays closed to limit airflow from the corridor. Anyone with symptoms of infection is excluded from the room.

  13. Question 13Patient Care and Education

    A radiographer accidentally touches a sterile drape with a bare hand. The correct action is to:

    1. Treat the field as contaminated and replace the drape Correct answer.
    2. Spray the area with disinfectant and continue
    3. Put on sterile gloves and proceed with the setup
    4. Continue if the contact lasted only a moment

    Explanation

    Any contact between a nonsterile object and a sterile field renders the field contaminated, and the affected items must be replaced. Sterile technique cannot be restored by spraying, and gloves worn after the break do not correct it. The contaminated material is discarded and the setup begun again.

  14. Question 14Patient Care and Education

    When administering a cleansing enema before a barium study, the solution should be:

    1. Cooled, to slow bowel motility and cramping
    2. At room temperature, with the bag held at eye level
    3. Heated to 120 degrees Fahrenheit to speed the flow
    4. Warm, with the bag 12 to 18 inches above the hip Correct answer.

    Explanation

    Solution warmed to about 105 degrees Fahrenheit (40.5 degrees Celsius) and delivered from a bag 12 to 18 inches above the patient allows gravity to control the rate and limits cramping. Solution that is too hot burns the mucosa and too cold causes severe cramping. Raising the bag higher increases the flow rate and cramping.

  15. Question 15Patient Care and Education

    A patient arrives with an indwelling urinary catheter and drainage bag. During the examination, the bag should be:

    1. Raised above the bladder to speed drainage
    2. Hung below the level of the bladder Correct answer.
    3. Clamped and disconnected for the examination
    4. Placed on the table beside the patient

    Explanation

    Gravity drainage requires the bag to remain below bladder level so that urine does not flow backward into the bladder and introduce organisms. The tubing is kept free of loops and kinks and is not disconnected. The bag is never placed on the floor or on the examining table beside the patient.

  16. Question 16Patient Care and Education

    When a restraint is applied to keep a patient safely positioned for a procedure, the radiographer must:

    1. Tie the restraint out of the patient's reach
    2. Leave the patient alone to reduce stimulation
    3. Attach the strap to the side rail of the table
    4. Check circulation and remove it as soon as possible Correct answer.

    Explanation

    Restraints are used only when less restrictive measures fail, must be released and removed as soon as the procedure permits, and require monitoring of pulse, color, temperature, and sensation in the restrained limb. They are secured to the frame of the table, not to movable parts. The patient is never left unattended while restrained.

  17. Question 17Patient Care and Education

    Which adjustment is most appropriate when imaging an older adult with thin, fragile skin?

    1. Applying extra tape to secure the cassette
    2. Keeping the room cool to reduce perspiration
    3. Speaking loudly in case the patient is hard of hearing
    4. Using padding and avoiding tape on the skin Correct answer.

    Explanation

    Aging skin is thin, loses subcutaneous padding, and tears easily, so pressure points are padded and tape is kept off the skin when possible. Shearing forces should be minimized during transfers. Hearing should be assessed individually rather than assumed to be poor.

  18. Question 18Patient Care and Education

    A patient scheduled for an upper gastrointestinal series reports eating breakfast two hours ago. The radiographer should:

    1. Give the patient water to help empty the stomach
    2. Proceed with the examination as ordered
    3. Perform the study but increase the kilovoltage
    4. Notify the radiologist and delay the procedure Correct answer.

    Explanation

    Recent food in the stomach obscures mucosal detail and creates a risk of vomiting and aspiration, so the procedure is rescheduled or delayed. The radiologist is informed of the deviation from preparation instructions. Giving additional fluids does not empty the stomach promptly.

  19. Question 19Patient Care and Education

    Which action is appropriate for a patient with a documented latex allergy?

    1. Using latex-free gloves, tourniquet, and cuff Correct answer.
    2. Wearing powdered latex gloves but not touching the skin
    3. Rinsing latex gloves with water before use
    4. Asking the patient to bring their own supplies

    Explanation

    Latex-safe care requires removing all natural rubber latex items, including gloves, tourniquets, blood pressure cuffs, and adhesive products, from the patient's environment. Aerosolized glove powder can also trigger reactions. The allergy should be flagged and the patient scheduled to minimize exposure to latex dust from previous cases.

  20. Question 20Patient Care and Education

    A patient who speaks little English needs instructions for a barium swallow. The best approach is to:

    1. Giving written English instructions and proceeding
    2. Using a trained interpreter and checking understanding Correct answer.
    3. Having the patient's young child interpret
    4. Asking a bilingual coworker to translate quickly

    Explanation

    Qualified medical interpreters preserve accuracy and confidentiality and are required for meaningful communication and consent. Untrained ad hoc interpreters may omit or distort instructions. Teach-back with the interpreter confirms that the patient can actually follow the directions.

  21. Question 21Patient Care and Education

    Which set of findings most suggests an anaphylactic reaction to iodinated contrast rather than a vasovagal reaction?

    1. Hives with wheezing and a rapid heart rate Correct answer.
    2. Warmth and redness confined to the injection site
    3. A slow heart rate with cold, clammy skin
    4. Nausea with a normal pulse and blood pressure

    Explanation

    Anaphylaxis is an immunoglobulin E mediated reaction producing urticaria, bronchospasm, and hypotension with a compensatory tachycardia. Vasovagal reactions produce bradycardia with pale, clammy skin and are self-limited once the patient is supine. Anaphylaxis requires immediate epinephrine and emergency support.

  22. Question 22Patient Care and Education

    During a power injection, a patient reports severe pain and burning at the intravenous site. The appropriate response is to:

    1. Flush the cannula with saline and complete the injection
    2. Stop, aspirate residual contrast, and notify the radiologist Correct answer.
    3. Massage the site so the contrast disperses into tissue
    4. Apply a warm compress and continue the study

    Explanation

    Pain and burning during injection indicate extravasation, and the injection must be stopped immediately. Gentle aspiration through the cannula removes some residual contrast, and the radiologist directs further care, which generally includes limb elevation and cold compresses. The site is documented and the patient is monitored for swelling, blistering, and neurovascular changes.

  23. Question 23Patient Care and Education

    A patient with diabetes becomes shaky, sweaty, and confused just before the examination, and the blood glucose reads 52 mg/dL. The appropriate action is to:

    1. Withholding all food and rechecking glucose in 30 minutes
    2. Giving a diet soda and continuing the examination
    3. Giving oral glucose if the patient can swallow Correct answer.
    4. Starting the examination quickly so the patient can eat afterward

    Explanation

    Glucose below 70 mg/dL with shakiness, diaphoresis, and altered mental status indicates hypoglycemia, which is treated with a fast-acting carbohydrate when the patient can swallow safely. Diet beverages contain no sugar and will not raise glucose. If the patient cannot swallow or is unresponsive, emergency assistance is summoned and intravenous glucose or glucagon is given.

  24. Question 24Patient Care and Education

    Which practice is correct when suctioning a patient's tracheostomy?

    1. Applying suction continuously while inserting the catheter
    2. Suctioning for 30 seconds to clear secretions fully
    3. Using the largest catheter that fits the stoma
    4. Limiting each pass to about 10 seconds Correct answer.

    Explanation

    Suction is applied only during withdrawal and each pass is limited to roughly 10 seconds to prevent hypoxia and mucosal trauma. The patient is allowed to recover and is oxygenated between passes. Sterile technique is used, and the catheter is rotated gently as it is withdrawn.

  25. Question 25Patient Care and Education

    A patient with a chest tube and water-seal drainage unit must be moved onto the radiographic table. The radiographer should:

    1. Keep the unit upright and below the level of the chest Correct answer.
    2. Disconnect the tubing from the patient during the move
    3. Clamp the tube during the transfer
    4. Set the unit on the table beside the patient

    Explanation

    The drainage unit must stay upright and below chest level so that fluid drains by gravity and does not siphon back into the pleural space. The unit travels with the patient and the tubing is kept free of kinks and dependent loops. Clamping or disconnecting the system can cause tension pneumothorax or contamination.

  26. Question 26Patient Care and Education

    When should the radiographer perform hand hygiene?

    1. Before and after contact with each patient Correct answer.
    2. Only when gloves will not be worn
    3. Only after contact with blood or body fluids
    4. At the start of the shift and before meals

    Explanation

    Hand hygiene is required before and after every patient contact and after touching blood, body fluids, or contaminated equipment, whether or not gloves are used. Gloves do not replace hand hygiene, and hand hygiene is not limited to the start of a shift or to visibly soiled contact.

  27. Question 27Patient Care and Education

    Which action correctly identifies a patient before a radiographic examination?

    1. Ask the patient whether this is the right department
    2. Match the name on the requisition with the room number
    3. Rely on the name printed on the examination request
    4. Verify two identifiers, such as name and date of birth Correct answer.

    Explanation

    The standard is active verification of two patient-specific identifiers, such as full name and date of birth, checked against the request and the identification band. Room numbers, department names, and the requisition alone are not acceptable identifiers.

  28. Question 28Patient Care and Education

    A patient seated in a wheelchair must be moved onto the radiographic table. The radiographer should first:

    1. Ask the patient to stand while the chair is moved away
    2. Lock the wheels and raise the footrests Correct answer.
    3. Tilt the chair back toward the table
    4. Have the patient push up from the armrests first

    Explanation

    The wheelchair is stabilized by locking the wheels and the footrests are raised so the patient's feet are not caught as the patient stands. Standing a patient beside an unlocked chair or asking for a push-up before the chair is secured invites a fall.

  29. Question 29Patient Care and Education

    A patient who is hard of hearing needs instructions for a chest radiograph. The radiographer should:

    1. Speak more slowly with the face turned away
    2. Face the patient and speak clearly, using written cues Correct answer.
    3. Use gestures only and skip verbal instructions
    4. Speak in a loud shout from behind the patient

    Explanation

    Facing the patient allows lip reading and visual cues, and writing key instructions reinforces understanding. Shouting, hiding the face, or relying on gestures alone reduces comprehension and cooperation.

  30. Question 30Patient Care and Education

    A patient begins to have a tonic-clonic seizure during an examination. The radiographer should:

    1. Restrain the limbs until the movements stop
    2. Insert a tongue blade between the teeth
    3. Leave the patient alone to summon the physician
    4. Protect the patient from injury and time the seizure Correct answer.

    Explanation

    Care during a seizure focuses on safety: lower the patient, clear nearby objects, cushion the head, and time the event while summoning help. Nothing is placed in the mouth and the limbs are not restrained, because restraint can cause injury.

  31. Question 31Patient Care and Education

    A patient of childbearing age scheduled for an abdominal radiograph says she may be pregnant. The radiographer should:

    1. Perform the examination because the physician ordered it
    2. Ask the patient to sign a waiver and then proceed
    3. Change the order to a fluoroscopic study instead
    4. Stop and consult the radiologist before proceeding Correct answer.

    Explanation

    When pregnancy status is uncertain, the examination is paused so that pregnancy can be verified and the radiologist can weigh the clinical benefit against fetal risk. A signed waiver or a change in modality does not resolve the underlying question.

  32. Question 32Patient Care and Education

    A radiographer sustains a needlestick injury while disposing of a needle. The radiographer should:

    1. Apply a tourniquet above the puncture site
    2. Wait to see whether symptoms develop before reporting
    3. Wash the site and report the exposure immediately Correct answer.
    4. Squeeze the site and finish the procedure first

    Explanation

    The site is washed with soap and water and the exposure is reported at once so that postexposure evaluation and prophylaxis can begin promptly. Delaying the report or manipulating the wound delays care and may worsen outcome.

  33. Question 33Patient Care and Education

    An unaccompanied 15-year-old arrives for an elective contrast examination. Consent for the procedure must be obtained from:

    1. A parent or legal guardian Correct answer.
    2. The patient, if the patient seems mature enough
    3. Any adult who accompanies the patient
    4. The radiographer assigned to the room

    Explanation

    A minor generally cannot give legal consent for an elective procedure, so consent is obtained from a parent or legal guardian unless a specific legal provision applies. The radiographer does not provide consent and does not judge a minor's maturity to consent.

  34. Question 34Patient Care and Education

    Which instruction is appropriate for a patient after a barium enema?

    1. Expect dark, tarry stools for one week
    2. Increase fluid intake and report if no bowel movement occurs Correct answer.
    3. Restrict fluids until the barium has passed
    4. Return at once if the stools are chalky white

    Explanation

    Barium is eliminated by drinking extra fluids and, when ordered, a laxative; retention of barium is a concern, so absence of a bowel movement must be reported. Chalky or light-colored stool is an expected finding from barium, not a reason to return.

  35. Question 35Patient Care and Education

    Which practice is correct when a patient must receive oxygen from a portable cylinder during transport?

    1. Coat the valve threads with petroleum jelly to ease connection
    2. Store the cylinder loosely beside the patient's head
    3. Secure the cylinder upright in a holder or cart Correct answer.
    4. Lay the cylinder flat on the stretcher during transport

    Explanation

    Cylinders are secured upright in a holder or cart so they cannot fall and damage the valve, and they are kept away from grease, oil, and heat. Petroleum products and unsecured cylinders both create fire and injury hazards.

  36. Question 36Patient Care and Education

    A female patient scheduled for a pelvic radiograph asks that a female staff member stay in the room. The radiographer should:

    1. Ask the patient to sign a release before continuing
    2. Continue the examination without addressing the request
    3. Explain that hospital policy does not allow observers
    4. Arrange for a female staff member to stay as requested Correct answer.

    Explanation

    Requests for a chaperone are honored whenever possible to protect the patient's privacy, comfort, and dignity, and the arrangement is documented. Dismissing the request or requiring a release ignores the patient's right to feel safe during the examination.

  37. Question 37Patient Care and Education

    Thirty minutes before a scheduled procedure, a patient asks the radiographer for pain medication. The radiographer should:

    1. Explain that an order is needed and notify the nurse Correct answer.
    2. Tell the patient that nothing can be done at this time
    3. Delay the examination until the patient feels better
    4. Provide an analgesic from the department stock

    Explanation

    Administering medication requires a valid order and falls outside the radiographer's independent scope, so the request is relayed to the nurse or physician responsible for the patient. Supplying stock medication or dismissing the request is inappropriate.

  38. Question 38Patient Care and Education

    A patient with suspected active pulmonary tuberculosis needs a portable chest radiograph. Which precaution does the radiographer follow?

    1. Perform the examination without added precautions
    2. Wear an N95 respirator and mask the patient Correct answer.
    3. Wear gloves and a gown but no respiratory protection
    4. Have the patient wear an N95 respirator for the exposure

    Explanation

    Tuberculosis spreads by the airborne route, so the radiographer wears a fit-tested N95 respirator and the patient wears a surgical mask during transport and contact; the portable examination is performed in a negative-pressure room when available. Gloves and gown alone do not protect against inhaled droplet nuclei.

  39. Question 39Patient Care and Education

    A patient with reduced kidney function who takes metformin is scheduled for a contrast-enhanced CT. The radiographer should:

    1. Proceed because metformin does not interact with contrast
    2. Cancel the study and tell the patient to stop metformin for a week
    3. Give the patient extra oral fluids before the injection
    4. Notify the physician so metformin can be withheld per protocol Correct answer.

    Explanation

    In patients with impaired renal function, metformin is typically withheld at the time of iodinated contrast administration and for about 48 hours afterward, with renal function rechecked before it is resumed. The decision belongs to the ordering physician, and the radiographer's role is to ensure the team is aware.

  40. Question 40Patient Care and Education

    A patient scheduled for an elective contrast study reports hives after contrast in the past. The most appropriate action is to:

    1. Administer diphenhydramine before the injection
    2. Cancel the study permanently and note the allergy
    3. Inform the radiologist so premedication can be considered Correct answer.
    4. Proceed without comment, since hives are not serious

    Explanation

    A prior urticarial reaction is a risk factor for a repeat reaction, so the radiologist is informed and may order premedication, an alternative agent, or a different study. Premedication reduces but does not eliminate risk, and the radiographer does not prescribe or administer drugs independently.

  41. Question 41Image Production - Equipment and Image Acquisition

    Which x-ray tube component is responsible for the thermionic emission of electrons?

    1. Rotating anode disc
    2. Induction stator
    3. Tungsten filament Correct answer.
    4. Glass envelope

    Explanation

    Thermionic emission occurs at the filament, which is part of the cathode; when heated by a current it releases electrons that form the tube current. Those electrons are accelerated across the tube and strike the anode to produce x-rays. The stator and envelope serve only to rotate the anode and maintain the vacuum.

  42. Question 42Image Production - Equipment and Image Acquisition

    Which exposure factor primarily controls the total number of x-rays produced during an exposure?

    1. Added filtration
    2. Milliampere-seconds Correct answer.
    3. Source-to-image distance
    4. Focal spot size

    Explanation

    The number of photons emitted is proportional to the product of tube current and exposure time, so mAs governs beam quantity and receptor exposure. It does not change the energy of the individual photons. Kilovoltage, by contrast, governs beam energy and penetrability.

  43. Question 43Image Production - Equipment and Image Acquisition

    An exposure of 70 kVp at 20 mAs produces acceptable receptor exposure. Using the 15% rule, what mAs maintains the same exposure if kVp is increased to approximately 80 kVp?

    1. 30 mAs
    2. 10 mAs Correct answer.
    3. 20 mAs
    4. 40 mAs

    Explanation

    The 15% rule states that raising kVp by about 15% roughly doubles receptor exposure, so mAs must be halved to keep exposure constant. Halving 20 mAs yields 10 mAs. Leaving mAs unchanged would double exposure.

  44. Question 44Image Production - Equipment and Image Acquisition

    The anode heel effect causes x-ray beam intensity to be greatest on which side of the beam?

    1. Anode side of the tube
    2. Central ray of the beam
    3. Cathode side of the tube Correct answer.
    4. Perpendicular to the cathode-anode axis

    Explanation

    Because photons are produced a short distance inside the anode, those traveling toward the cathode side pass through less anode material and are attenuated less. Beam intensity is therefore highest toward the cathode. Positioning the thicker body part toward the cathode side makes use of the more intense portion of the beam.

  45. Question 45Image Production - Equipment and Image Acquisition

    Compared with a 5:1 grid of the same frequency, a 12:1 grid will do which of the following?

    1. Remove less scatter and require lower mAs
    2. Remove more scatter and require higher mAs Correct answer.
    3. Remove more scatter and require lower mAs
    4. Remove the same amount of scatter with no mAs change

    Explanation

    Grid ratio is the height of the lead strips divided by the width of the interspace material. A higher ratio intercepts more scattered photons at steeper angles but also absorbs more primary photons, so mAs must be increased to preserve receptor exposure.

  46. Question 46Image Production - Equipment and Image Acquisition

    Detective quantum efficiency describes which property of an image receptor?

    1. How much it magnifies the anatomy being imaged
    2. How rapidly it can be read between successive exposures
    3. How many pixels it contains per unit area
    4. How efficiently it converts radiation into signal Correct answer.

    Explanation

    Detective quantum efficiency compares the signal-to-noise ratio squared at the output with that at the input of the receptor. It quantifies how effectively incident radiation is converted into useful image signal. A receptor with higher DQE can produce a diagnostic image with less radiation.

  47. Question 47Image Production - Equipment and Image Acquisition

    Increasing kVp while keeping mAs constant produces which change in the image?

    1. Unchanged contrast with reduced receptor exposure
    2. Longer-scale contrast and greater receptor exposure Correct answer.
    3. Shorter-scale contrast with increased receptor exposure
    4. Shorter-scale contrast and reduced receptor exposure

    Explanation

    Kilovoltage sets the maximum and average energy of the beam. A higher kVp makes the beam more penetrating, raises receptor exposure at constant mAs, and produces more scatter and more transmitted gray tones, which lengthens the contrast scale.

  48. Question 48Image Production - Equipment and Image Acquisition

    A radiograph shows a gradual loss of density from the center of the image toward one edge. Which is the most likely cause?

    1. Lateral decentering of the grid Correct answer.
    2. Patient motion during the exposure
    3. Improper collimation of the field
    4. Underexposure of the image receptor

    Explanation

    Grid cutoff occurs when primary photons are absorbed by the lead strips because the beam is not aligned with them, as with decentering or tilt. Because the misalignment increases with distance from the center of the grid, the density loss is progressive toward the affected edge.

  49. Question 49Image Production - Equipment and Image Acquisition

    A radiographic grid is placed between the patient and the image receptor primarily to do what?

    1. Absorb scatter before it reaches the receptor Correct answer.
    2. Improve detail by reducing focal spot blur
    3. Reduce patient dose by limiting the radiation field
    4. Increase the intensity of the primary beam

    Explanation

    Scattered photons carry no useful positional information and fog the receptor, lowering contrast. The lead strips of a grid are angled to transmit primary photons while absorbing those that arrive at an angle. The result is improved contrast, at the cost of higher mAs.

  50. Question 50Image Production - Equipment and Image Acquisition

    Which is the main disadvantage of using an air gap instead of a grid to control scatter?

    1. It cannot be used with automatic exposure control
    2. It substantially increases patient dose
    3. It increases magnification of the anatomy Correct answer.
    4. It reduces the spatial resolution of the image

    Explanation

    An air gap allows scattered photons to diverge away from the receptor before reaching it. However, the required object-to-image distance increases geometric magnification of the anatomy. Increasing SID can offset this but also requires greater mAs by the inverse square law.

  51. Question 51Image Production - Equipment and Image Acquisition

    Reducing the collimated field size while keeping all other exposure factors constant will do which of the following?

    1. Decrease scatter and reduce patient dose Correct answer.
    2. Increase scatter reaching the image receptor
    3. Increase patient dose but improve contrast
    4. Decrease recorded detail and increase noise

    Explanation

    Scatter is generated within the volume of tissue irradiated, so restricting the field to the anatomy of interest reduces the volume producing scatter. Less scatter reaching the receptor improves contrast, and less irradiated tissue lowers patient dose.

  52. Question 52Image Production - Equipment and Image Acquisition

    Adding filtration to the x-ray beam has which effect on the image and the patient?

    1. Increased patient dose and decreased contrast
    2. Reduced patient dose and decreased contrast Correct answer.
    3. Increased patient dose and increased contrast
    4. Reduced patient dose and increased contrast

    Explanation

    Filtration preferentially absorbs low-energy photons that would otherwise be absorbed in the patient without contributing to the image. Removing them lowers patient dose and hardens the beam, which reduces subject contrast and produces a longer scale.

  53. Question 53Image Production - Equipment and Image Acquisition

    Moiré artifact on a computed radiography image is most likely caused by which of the following?

    1. Grid frequency aliasing with the pixel matrix Correct answer.
    2. Excessive laser power applied during plate readout
    3. A dirty light guide in the reader
    4. Backscatter from the cassette backing

    Explanation

    When the spatial frequency of the grid's lead strips approaches the sampling frequency of the pixel matrix, the two patterns interfere and produce a coarse, wavy aliasing pattern. Matching grid frequency to the detector or removing the grid eliminates the artifact.

  54. Question 54Image Production - Equipment and Image Acquisition

    If the source-to-image distance is increased while the object-to-image distance stays the same, what happens to magnification?

    1. Magnification increases
    2. Magnification is unchanged
    3. Magnification becomes equal to one
    4. Magnification decreases Correct answer.

    Explanation

    Magnification equals SID divided by source-to-object distance. Increasing SID while the object stays the same distance above the receptor increases the source-to-object distance, so the ratio moves closer to 1 and magnification falls.

  55. Question 55Image Production - Equipment and Image Acquisition

    What is the function of the ionization chamber in an automatic exposure control system?

    1. It ends the exposure at a preset receptor dose Correct answer.
    2. It measures the heat load on the anode
    3. It adjusts kVp automatically for patient thickness
    4. It filters low-energy photons from the beam

    Explanation

    The ionization chamber sits between the patient and the receptor and monitors radiation exiting the patient. When the preset charge, and therefore the desired receptor dose, is reached, the system terminates the exposure. This keeps receptor exposure consistent as patient thickness varies.

  56. Question 56Image Production - Equipment and Image Acquisition

    Selecting the small focal spot instead of the large focal spot produces which result?

    1. Increased geometric unsharpness
    2. Shorter exposure times for a given mAs
    3. Improved spatial resolution Correct answer.
    4. Greater anode heat capacity

    Explanation

    Geometric unsharpness is proportional to focal spot size, so a smaller focal spot produces a smaller penumbra and sharper recorded detail. The trade-off is reduced heat capacity, which limits the mA that can be used and lengthens exposure times.

  57. Question 57Image Production - Equipment and Image Acquisition

    The shortest exposure time an automatic exposure control system is capable of producing is called which of the following?

    1. Phototimer calibration time
    2. Backup time
    3. Density control time
    4. Minimum response time Correct answer.

    Explanation

    Minimum response time reflects how quickly the system can terminate the exposure once the receptor dose is reached. It defines the lower limit of exposure time the AEC can deliver. If the required time falls below this limit, the image will be overexposed.

  58. Question 58Image Production - Equipment and Image Acquisition

    An exposure is made at 80 kVp, 300 mA, and 0.1 s using a three-phase, 12-pulse generator. How many heat units does this exposure generate?

    1. 4800 HU
    2. 3384 HU Correct answer.
    3. 2400 HU
    4. 3240 HU

    Explanation

    Heat units are calculated as kVp times mA times time times a waveform factor. For a three-phase, 12-pulse generator the factor is 1.41, so 80 × 300 × 0.1 × 1.41 equals approximately 3384 HU. The factor accounts for the greater output efficiency of multiphase rectification.

  59. Question 59Image Production - Equipment and Image Acquisition

    In computed radiography, what is the function of the photostimulable phosphor plate?

    1. It holds a latent image that a laser later reads Correct answer.
    2. It stores the image as a permanent silver image
    3. It amplifies light photons in a scintillator layer
    4. It converts x-rays directly into an electrical signal

    Explanation

    X-ray photons excite electrons in the phosphor into metastable traps, forming a latent image proportional to the radiation received. During readout a scanning laser releases the stored energy as light, which is detected and digitized. The plate is then erased and reused.

  60. Question 60Image Production - Equipment and Image Acquisition

    An object appears 4 cm long on an image made at 100 cm SID with the object 20 cm above the image receptor. What is the true length of the object?

    1. 5.0 cm
    2. 3.0 cm
    3. 2.5 cm
    4. 3.2 cm Correct answer.

    Explanation

    Magnification factor equals SID divided by source-to-object distance, which is 100 ÷ 80 or 1.25. True size is image size divided by the magnification factor, so 4 ÷ 1.25 equals 3.2 cm.

  61. Question 61Image Production - Equipment and Image Acquisition

    Which detector converts x-ray energy directly into an electrical charge without a light-producing step?

    1. Cesium iodide flat panel
    2. Amorphous selenium flat panel Correct answer.
    3. Photostimulable phosphor plate
    4. Xenon gas ionization detector

    Explanation

    Direct-conversion flat panels use a photoconductor such as amorphous selenium that converts absorbed x-rays into electron-hole pairs. A thin-film transistor array then collects the charge directly, avoiding the light spread that occurs in indirect systems.

  62. Question 62Image Production - Equipment and Image Acquisition

    A digital system has a target exposure index of 200. An image is acquired with an exposure index of 400. What is the deviation index?

    1. +3.0 Correct answer.
    2. +2.0
    3. −3.0
    4. −0.3

    Explanation

    The deviation index equals 10 times the base-10 logarithm of the actual exposure index divided by the target index. Here 400 ÷ 200 equals 2, and the log of 2 is about 0.3, giving a deviation index of approximately +3.0. This indicates roughly twice the target receptor exposure.

  63. Question 63Image Production - Equipment and Image Acquisition

    A detector with a smaller pixel pitch produces which of the following?

    1. Higher spatial resolution than a larger pitch Correct answer.
    2. A larger field of view at the same matrix
    3. Lower spatial resolution and a smaller matrix
    4. Greater scatter rejection and less noise

    Explanation

    Pixel pitch is the distance between the centers of adjacent pixels. A smaller pitch samples the image more finely within the same field of view, which increases spatial resolution. It also generally reduces the fill factor and can increase noise per pixel.

  64. Question 64Image Production - Equipment and Image Acquisition

    An acceptable image results at a 100 cm SID using 10 mAs. What mAs maintains the same receptor exposure at 200 cm?

    1. 40 mAs Correct answer.
    2. 80 mAs
    3. 10 mAs
    4. 5 mAs

    Explanation

    Beam intensity varies inversely with the square of the distance. Doubling the SID quarters the intensity reaching the receptor, so mAs must increase fourfold. Four times 10 mAs is 40 mAs.

  65. Question 65Image Production - Equipment and Image Acquisition

    Compared with single-phase generators, high-frequency generators produce which of the following?

    1. A smaller effective focal spot at the same mA
    2. A more constant potential with higher output Correct answer.
    3. A longer exposure time for the same mAs
    4. A lower average photon energy for the same kVp

    Explanation

    High-frequency generators rectify and smooth the voltage waveform into a nearly constant potential. Because the voltage stays near peak, the beam has a higher average energy and greater output for the same kVp and mAs than a single-phase generator.

  66. Question 66Image Production - Equipment and Image Acquisition

    What is the function of the cathode filament in an x-ray tube?

    1. It emits electrons by thermionic emission Correct answer.
    2. It absorbs scattered radiation before it reaches the detector
    3. It filters low-energy photons from the beam
    4. It converts electrons into x-ray photons

    Explanation

    The filament is heated by an electric current, and electrons are released from its surface by thermionic emission. These electrons are then accelerated toward the anode to produce x-rays at the target. The other listed functions belong to the anode target, the grid, or added filtration.

  67. Question 67Image Production - Equipment and Image Acquisition

    What is the primary purpose of rotating the anode during an x-ray exposure?

    1. To align the electron beam with the collimator
    2. To increase the voltage across the tube
    3. To distribute heat over a larger target area Correct answer.
    4. To increase the effective focal spot size

    Explanation

    Rotation spreads electron bombardment around a circular track on the anode, which increases the area available for heat dissipation. This allows higher exposures and helps prevent target damage. Tube voltage and collimation are controlled by other components.

  68. Question 68Image Production - Equipment and Image Acquisition

    In the x-ray circuit, what is the function of rectification?

    1. To store electrical charge for the duration of the exposure
    2. To measure the tube current
    3. To change alternating current to unidirectional current Correct answer.
    4. To step up the incoming voltage

    Explanation

    Rectifiers allow current to flow in only one direction, producing a unidirectional high voltage across the x-ray tube. This prevents reverse current flow during the alternating cycle. Voltage step-up is performed by transformers, current is measured by a meter, and charge storage is a capacitor function.

  69. Question 69Image Production - Equipment and Image Acquisition

    Increasing the window width on a displayed digital radiograph produces which change?

    1. Increased spatial resolution
    2. Reduced contrast Correct answer.
    3. Increased brightness
    4. Reduced noise

    Explanation

    Window width determines the range of pixel values that are mapped to the available gray levels. A wider window assigns more values to gray shades, which lowers displayed contrast. Brightness is controlled by window level, while spatial resolution and noise are established at acquisition.

  70. Question 70Image Production - Equipment and Image Acquisition

    Because of the anode heel effect, which part of the patient should be positioned toward the cathode side of the x-ray tube?

    1. The part farthest from the image receptor
    2. The thinner body part
    3. The part closest to the image receptor
    4. The thicker body part Correct answer.

    Explanation

    The heel effect causes x-ray beam intensity to be greater toward the cathode side of the tube. Positioning the thicker anatomy toward the cathode helps equalize receptor exposure across the image. Object-to-image distance changes magnification, not the orientation of the heel effect.

  71. Question 71Image Production - Equipment and Image Acquisition

    The effective focal spot is smaller than the actual focal spot because of which principle?

    1. Inverse square law
    2. Anode heel effect
    3. Line-focus principle Correct answer.
    4. Reciprocity law

    Explanation

    The line-focus principle describes how an angled anode target projects a smaller focal spot toward the patient than the actual area bombarded by electrons. This improves spatial resolution without reducing the heat capacity of the target. The inverse square law concerns distance and intensity, while the heel effect concerns intensity variation across the beam.

  72. Question 72Image Production - Equipment and Image Acquisition

    At very low kVp settings, the space charge effect in an x-ray tube tends to do which of the following?

    1. Increase the number of x-ray photons produced per electron
    2. Reduce the anode rotation speed
    3. Limit the tube current that can be achieved Correct answer.
    4. Eliminate the need for rectification

    Explanation

    Electrons emitted by the filament form a cloud near the cathode, and their mutual repulsion opposes further emission. This space charge effect limits the tube current that can be achieved, especially at low tube voltage. It does not increase photon production, remove the need for rectification, or affect anode rotation.

  73. Question 73Image Production - Equipment and Image Acquisition

    A digital image with a bit depth of 10 bits can display how many distinct shades of gray?

    1. 256
    2. 100
    3. 1024 Correct answer.
    4. 512

    Explanation

    Bit depth defines the number of binary bits used to represent each pixel value. A 10-bit system provides 2 raised to the 10th power, or 1024, possible gray levels. An 8-bit system, by comparison, provides 256 levels.

  74. Question 74Image Production - Equipment and Image Acquisition

    In a computed radiography plate, the latent image is stored primarily as which of the following?

    1. A chemical silver image
    2. A charge pattern on a thin-film transistor array
    3. Trapped electrons in the phosphor layer Correct answer.
    4. A magnetic pattern in the support layer

    Explanation

    X-ray exposure excites electrons in the photostimulable phosphor and traps them in metastable energy levels. The stored charge pattern is later released by laser stimulation during plate reading. Chemical silver images belong to film, and thin-film transistor arrays belong to direct digital detectors.

  75. Question 75Image Production - Equipment and Image Acquisition

    Why are cesium iodide scintillators in indirect flat-panel detectors grown as needle-like crystals?

    1. To eliminate the need for a thin-film transistor array
    2. To guide light toward the photodiode and reduce lateral spread Correct answer.
    3. To increase detective quantum efficiency by absorbing more scatter
    4. To convert x-rays directly into electrical charge

    Explanation

    Needle-like cesium iodide crystals act somewhat like fiber-optic channels, directing emitted light toward the photodiode. This limits lateral light spread and improves spatial resolution. Cesium iodide is an indirect converter because it first produces light, and a thin-film transistor array is still needed to read the signal.

  76. Question 76Image Production - Equipment and Image Acquisition

    Which change will increase the geometric unsharpness (penumbra) of a radiograph?

    1. Decreasing the focal spot size
    2. Increasing the object-to-image distance Correct answer.
    3. Increasing the source-to-image distance
    4. Decreasing the object-to-image distance

    Explanation

    Geometric unsharpness increases with larger focal spot size and larger object-to-image distance, and it decreases as source-to-image distance increases. Moving the object farther from the image receptor therefore increases penumbra. The other listed changes reduce blur.

  77. Question 77Image Production - Equipment and Image Acquisition

    With automatic exposure control engaged, the mA is changed from 200 to 400 while all other exposure factors remain constant. What is the expected result?

    1. The exposure time doubles
    2. The receptor exposure is halved
    3. The receptor exposure doubles
    4. The exposure time is halved Correct answer.

    Explanation

    Automatic exposure control terminates the exposure when the preset receptor exposure is reached. Doubling mA doubles the rate of exposure, so the system shortens the exposure time to deliver the same total receptor exposure. Therefore, receptor exposure remains essentially unchanged.

  78. Question 78Image Production - Equipment and Image Acquisition

    A digital detector has a 2048 x 2048 matrix and is used with a 40 cm field of view. What is the approximate pixel size?

    1. 1.0 mm
    2. 0.5 mm
    3. 0.2 mm Correct answer.
    4. 2.0 mm

    Explanation

    Pixel size is calculated by dividing the field of view by the matrix size. A 40 cm field equals 400 mm, and 400 mm divided by 2048 is approximately 0.195 mm, or about 0.2 mm. The other values would require a much smaller matrix for the same field of view.

  79. Question 79Image Production - Equipment and Image Acquisition

    A flat-panel detector element has a low fill factor. Which consequence is most directly expected?

    1. Improved spatial resolution from larger pixels
    2. Elimination of quantum mottle
    3. A higher maximum tube voltage
    4. Less x-ray signal collected per pixel Correct answer.

    Explanation

    Fill factor is the fraction of each pixel area that is sensitive to x-rays and can collect signal. A low fill factor means less of the pixel contributes to signal collection, which reduces the signal available and can lower detective quantum efficiency. It does not eliminate noise or alter the tube voltage capability.

  80. Question 80Image Production - Equipment and Image Acquisition

    The modulation transfer function (MTF) of a radiographic imaging system describes which of the following?

    1. The maximum patient dose that is allowed for a particular examination
    2. The efficiency of x-ray absorption in the detector
    3. How well contrast is transferred at different spatial frequencies Correct answer.
    4. The number of gray levels the display can show

    Explanation

    MTF measures how faithfully contrast is reproduced as spatial frequency changes. A system with better MTF preserves contrast in small structures and therefore demonstrates better resolution performance. Gray levels relate to bit depth, and absorption efficiency relates to quantum detection efficiency.

  81. Question 81Image Production - Image Evaluation

    With all other exposure factors held constant, which factor primarily controls the brightness (density) of a radiograph?

    1. Focal spot size
    2. kVp
    3. SID
    4. mAs Correct answer.

    Explanation

    Brightness/density is directly proportional to the number of photons reaching the receptor, which is controlled by mAs. kVp alters both quantity and penetration and is used mainly to control contrast, while SID and focal spot affect geometry rather than the primary exposure level.

  82. Question 82Image Production - Image Evaluation

    An image taken at 70 kVp is repeated at 90 kVp with mAs unchanged. The repeat image will most likely show:

    1. greater magnification
    2. higher subject contrast
    3. lower (longer-scale) contrast Correct answer.
    4. improved spatial resolution

    Explanation

    Higher kVp increases beam penetration so that differences in tissue attenuation produce smaller exposure differences at the receptor, resulting in a longer grayscale and lower contrast. Spatial resolution and magnification are geometric or detector properties unaffected by this change.

  83. Question 83Image Production - Image Evaluation

    The ability of an imaging system to render two small objects that lie close together as separate structures is called:

    1. contrast resolution
    2. spatial resolution Correct answer.
    3. latitude
    4. temporal resolution

    Explanation

    Spatial resolution describes the smallest separation at which two objects can still be distinguished and is governed mainly by pixel size and focal spot blur. Contrast resolution refers to distinguishing objects of similar attenuation, not similar position.

  84. Question 84Image Production - Image Evaluation

    The most effective way to reduce blur caused by voluntary or involuntary patient motion is to:

    1. increase the OID
    2. shorten the exposure time Correct answer.
    3. use a larger focal spot
    4. increase the SID

    Explanation

    Motion blur depends on how far the patient moves during the exposure, so a shorter exposure time limits the distance moved while the beam is on. SID and focal spot changes affect geometric sharpness, not patient movement.

  85. Question 85Image Production - Image Evaluation

    If the object-to-image receptor distance is increased while the SID remains constant, the resulting image will:

    1. show decreased magnification
    2. show decreased shape distortion
    3. show increased receptor exposure
    4. show increased magnification Correct answer.

    Explanation

    Magnification depends on the ratio of SID to source-to-object distance; moving the object farther from the receptor shortens the source-to-object distance and enlarges the projected image. Receptor exposure is governed by mAs, kVp, and distance from the source, not by OID.

  86. Question 86Image Production - Image Evaluation

    Restricting the x-ray beam to the area of clinical interest primarily serves to:

    1. reduce scattered radiation reaching the image receptor Correct answer.
    2. increase the effective focal spot size
    3. decrease beam filtration
    4. increase spatial resolution

    Explanation

    Smaller fields irradiate less tissue, so less scatter is produced and less reaches the receptor, improving contrast and reducing patient dose. Collimation does not change pixel size, focal spot size, or filtration.

  87. Question 87Image Production - Image Evaluation

    An image made with a focused grid shows a generalized decrease in receptor exposure across the entire field. The most likely cause is that the grid was:

    1. placed with its tube side facing the receptor Correct answer.
    2. used with too high a grid ratio for the kVp
    3. used at a shorter SID than its focal range
    4. positioned laterally off center

    Explanation

    A focused grid placed upside down causes the lead strips to angle away from the beam, so they absorb primary radiation across the whole image and produce a uniform density loss. Off-center or off-focus positioning typically causes cutoff that is worse toward one side.

  88. Question 88Image Production - Image Evaluation

    Geometric unsharpness (penumbra) is reduced by:

    1. increasing the exposure time
    2. increasing the OID
    3. using a larger focal spot
    4. using the smallest available focal spot Correct answer.

    Explanation

    Penumbra is proportional to focal spot size and OID and inversely proportional to source-to-object distance, so a smaller focal spot produces a sharper edge. Increasing OID or focal spot size enlarges the penumbra.

  89. Question 89Image Production - Image Evaluation

    An object lies 10 cm above the image receptor and the SID is 100 cm. The magnification factor is approximately:

    1. 1.25
    2. 2.00
    3. 1.11 Correct answer.
    4. 0.90

    Explanation

    The source-to-object distance is 100 cm minus 10 cm, or 90 cm, and magnification factor equals SID divided by source-to-object distance (100/90 = 1.11). The image is therefore slightly larger than the object.

  90. Question 90Image Production - Image Evaluation

    A computed radiography image displays a deviation index of -3. This indicates that the receptor exposure was approximately:

    1. one-third of the target value
    2. twice the target value
    3. within the acceptable range
    4. half of the target value Correct answer.

    Explanation

    The deviation index is a logarithmic scale in which each unit represents a factor of about 1.26, so a DI of -3 corresponds to roughly half the target exposure. Negative values indicate underexposure and positive values overexposure.

  91. Question 91Image Production - Image Evaluation

    A digital image histogram shows a large spike at the maximum pixel value. This most likely indicates:

    1. underexposure of the entire image
    2. clipping of high-signal areas with loss of data Correct answer.
    3. grid misalignment
    4. excessive spatial resolution

    Explanation

    Pixel values that reach the maximum digital limit are clipped, so structural information in those bright regions is lost. A spike at the top of the histogram is the signature of this saturation.

  92. Question 92Image Production - Image Evaluation

    Foreshortening of an anatomic structure on a radiograph occurs when the structure is:

    1. far from the image receptor
    2. angled relative to the receptor plane Correct answer.
    3. centered in the x-ray beam
    4. parallel to the image receptor plane

    Explanation

    When a part is inclined relative to the receptor, its projected length is shorter than its true length, which is called foreshortening. Parallel positioning with a perpendicular central ray preserves true shape.

  93. Question 93Image Production - Image Evaluation

    Two soft-tissue structures with very similar attenuation are best distinguished by a system with:

    1. a small matrix with large pixels
    2. high contrast resolution and low noise Correct answer.
    3. a large focal spot
    4. low mAs and high kVp technique

    Explanation

    Detecting small attenuation differences requires good low-contrast resolution combined with low noise so that subtle signal differences are not masked. Larger pixels, low mAs, and large focal spots all degrade the ability to see such differences.

  94. Question 94Image Production - Image Evaluation

    The air-gap technique reduces scatter reaching the receptor by:

    1. increasing the collimated field size
    2. decreasing the SID
    3. increasing the distance between the patient and the image receptor Correct answer.
    4. increasing the kVp

    Explanation

    Scattered photons diverge in all directions, so increasing the patient-to-receptor distance allows many of them to miss the receptor while the primary beam continues toward it. The increased OID must be offset because it also magnifies the image.

  95. Question 95Image Production - Image Evaluation

    The primary purpose of a repeat (reject) analysis program is to:

    1. evaluate individual technologist speed
    2. document patient dose for billing purposes
    3. identify the frequency and causes of unacceptable images so they can be reduced Correct answer.
    4. compare equipment from different vendors

    Explanation

    Repeat analysis tabulates rejected images by cause, revealing recurring problems such as positioning errors, artifacts, or technique errors so corrective action can be taken. It is a quality improvement tool rather than a billing or personnel monitoring activity.

  96. Question 96Image Production - Image Evaluation

    A CR image shows a faint image from a previous examination superimposed on the current image. The cause is:

    1. grid frequency aliasing
    2. incomplete erasure of the imaging plate Correct answer.
    3. incorrect histogram selection
    4. detector element failure

    Explanation

    The photostimulable plate must be erased after reading; if erasure is incomplete, residual signal from the prior exposure appears as a faint ghost image. This is sometimes called plate memory or ghosting.

  97. Question 97Image Production - Image Evaluation

    Decreasing the window width on a displayed digital image will:

    1. increase the displayed contrast Correct answer.
    2. decrease the displayed contrast
    3. change the raw exposure data
    4. increase the displayed brightness

    Explanation

    Window width determines the range of pixel values mapped to the display grayscale; narrowing that range steepens the mapping and increases displayed contrast. Processing of the displayed image does not alter the acquired raw data or exposure level.

  98. Question 98Image Production - Image Evaluation

    To minimize shape distortion of a body part, the part should be positioned so that:

    1. the part is parallel and the central ray is perpendicular Correct answer.
    2. the central ray is angled 15 degrees to the part
    3. the part is placed far from the receptor
    4. the part is rotated 45 degrees to the receptor

    Explanation

    Shape distortion is minimized when the object plane is parallel to the receptor and the central ray is perpendicular to both, so the projected image matches the true shape. Angulation or rotation of the part produces elongation or foreshortening.

  99. Question 99Image Production - Image Evaluation

    The spatial resolution of an imaging system is commonly expressed in units of:

    1. decibels
    2. Hounsfield units
    3. line pairs per millimeter Correct answer.
    4. milligray per second

    Explanation

    Resolution is reported as the number of line pairs that can be distinguished per millimeter, with higher values indicating better detail. Milligray per second, Hounsfield units, and decibels measure other quantities.

  100. Question 100Image Production - Image Evaluation

    A digital image appears grainy and noisy throughout. The most likely cause is:

    1. a very short OID
    2. excessive collimation
    3. a high grid ratio
    4. insufficient mAs Correct answer.

    Explanation

    Too few photons reaching the receptor produce quantum mottle, which appears as grainy noise and degrades low-contrast detail. Reducing collimation, increasing OID, or using a grid without compensating exposure would worsen rather than correct the problem.

  101. Question 101Image Production - Image Evaluation

    An object measures 4.0 cm on the image, and the magnification factor is 1.25. The actual size of the object is:

    1. 5.0 cm
    2. 4.25 cm
    3. 2.5 cm
    4. 3.2 cm Correct answer.

    Explanation

    Actual size equals image size divided by the magnification factor, so 4.0 cm divided by 1.25 gives 3.2 cm. Multiplying by the factor instead would enlarge the value rather than correct for magnification.

  102. Question 102Image Production - Image Evaluation

    A 0.6 mm focal spot is used with an OID of 10 cm and a source-to-object distance of 90 cm. The geometric penumbra is approximately:

    1. 6.7 mm
    2. 0.54 mm
    3. 0.067 mm Correct answer.
    4. 0.67 mm

    Explanation

    Penumbra equals focal spot size multiplied by OID divided by source-to-object distance: 0.6 x 10 / 90, which equals about 0.067 mm. The small result reflects the short OID relative to the long source-to-object distance.

  103. Question 103Image Production - Image Evaluation

    A technique of 10 mAs at 70 kVp produces an acceptable image without a grid. What mAs would maintain receptor exposure if an 8:1 grid is added at the same kVp?

    1. 30 mAs
    2. 80 mAs
    3. 40 mAs Correct answer.
    4. 20 mAs

    Explanation

    An 8:1 grid has a conversion factor of 4, so the original mAs must be multiplied by 4 to compensate for the absorbed scatter and primary radiation. Using a smaller multiplier would leave the image underexposed.

  104. Question 104Image Production - Image Evaluation

    A CR image displays a fine, wavy moiré pattern across the entire field. The most likely cause is:

    1. patient motion during exposure
    2. grid aliasing in the plate reader Correct answer.
    3. detector element failure
    4. double exposure of the plate

    Explanation

    When the grid's lead strip frequency is close to the plate reader's sampling frequency, the two interact to create a moiré or aliasing pattern. The fix is to use a grid with a different frequency or to orient it appropriately.

  105. Question 105Image Production - Image Evaluation

    Which statement correctly describes the modulation transfer function of an imaging system?

    1. It describes contrast preservation at each spatial frequency Correct answer.
    2. It quantifies quantum mottle at low dose
    3. It measures brightness uniformity across the field
    4. It describes how much scatter the receptor absorbs

    Explanation

    The MTF plots how well the system transfers signal contrast from the object to the image as a function of spatial frequency, with values falling off at higher frequencies. It is a measure of detail fidelity rather than of scatter, uniformity, or noise.

  106. Question 106Image Production - Image Evaluation

    A radiograph produced with high kVp and low subject contrast is best described as having:

    1. long-scale contrast Correct answer.
    2. increased magnification
    3. high spatial resolution
    4. short-scale contrast

    Explanation

    High kVp increases beam penetrability, so more attenuation differences are recorded as shades of gray, producing long-scale (low) contrast. Short-scale contrast is associated with lower kVp and a narrower range of densities.

  107. Question 107Image Production - Image Evaluation

    The most effective way to reduce motion unsharpness in an uncooperative patient is to:

    1. use the shortest exposure time Correct answer.
    2. increase the object-to-image distance
    3. reduce the milliamperage
    4. decrease the source-to-image distance

    Explanation

    Motion unsharpness is proportional to the time the patient moves during exposure, so the shortest possible exposure time minimizes blur. Increasing OID or decreasing SID worsens geometric unsharpness.

  108. Question 108Image Production - Image Evaluation

    Subject contrast on a radiograph is determined primarily by:

    1. the display window width setting
    2. the physical size of the focal spot
    3. the grid ratio selected for the exam
    4. tissue attenuation differences Correct answer.

    Explanation

    Subject contrast depends on differences in attenuation among tissues and on the energy of the x-ray beam. Focal spot size and grid ratio affect other image qualities, while window width is a display adjustment.

  109. Question 109Image Production - Image Evaluation

    An anatomic side marker is placed on a radiograph primarily to:

    1. indicate the grid ratio selected for the exposure
    2. identify patient side and orientation Correct answer.
    3. document the exposure index for the image
    4. measure the magnification factor of the part

    Explanation

    Side markers identify the patient's right or left side and the orientation of the part, helping prevent wrong-side interpretation errors. They do not measure exposure, grid ratio, or magnification.

  110. Question 110Image Production - Image Evaluation

    On a PA chest radiograph, the medial ends of the clavicles are not equidistant from the spinous process. This finding indicates:

    1. patient rotation Correct answer.
    2. inadequate inspiration
    3. motion during exposure
    4. excessive kilovoltage

    Explanation

    Clavicular symmetry relative to the spinous process is the standard check for rotation on a PA chest image. Unequal distances indicate that the patient is rotated rather than centered.

  111. Question 111Image Production - Image Evaluation

    A PA chest radiograph shows 8 posterior ribs above the diaphragm. This is best evaluated as:

    1. rotation of the thorax
    2. excessive inspiration
    3. inadequate inspiration Correct answer.
    4. acceptable inspiration

    Explanation

    Adequate inspiration on a PA chest image is usually indicated by 9 to 10 posterior ribs visible above the diaphragm. Only 8 posterior ribs suggests inadequate inspiration.

  112. Question 112Image Production - Image Evaluation

    In computed radiography, the spatial resolution of the image is primarily limited by the:

    1. the grid ratio employed
    2. the display window width
    3. laser beam spot size Correct answer.
    4. the focal spot size used

    Explanation

    In CR, the laser beam spot size and the sampling of the photostimulable phosphor plate determine the achievable spatial resolution. Grid ratio and focal spot affect other aspects of image quality.

  113. Question 113Image Production - Image Evaluation

    A detector with a high detective quantum efficiency (DQE) will, compared with a lower-DQE detector:

    1. demonstrate greater geometric distortion
    2. have a lower contrast resolution
    3. produce a higher SNR at the same dose Correct answer.
    4. require a higher radiation dose for the same noise

    Explanation

    DQE describes how efficiently a detector converts incident radiation into useful signal, so a higher DQE yields a higher signal-to-noise ratio at the same dose. It is a measure of dose efficiency, not geometric distortion.

  114. Question 114Image Production - Image Evaluation

    Changing from a 5:1 grid to a 12:1 grid, with all other factors unchanged, will:

    1. increase contrast and require a higher mAs Correct answer.
    2. increase spatial resolution
    3. reduce patient dose
    4. decrease contrast and require a lower mAs

    Explanation

    A higher grid ratio removes more scattered radiation before it reaches the receptor, which increases contrast. Because more primary radiation is also absorbed, mAs must be increased to maintain receptor exposure.

  115. Question 115Image Production - Image Evaluation

    Increasing the window level on a displayed digital image will:

    1. make the image appear darker Correct answer.
    2. increase image contrast
    3. make the image appear brighter
    4. decrease image contrast

    Explanation

    Window level controls the brightness mapping of pixel values. Raising the level maps more values below the display range, so the image appears darker. Contrast is controlled mainly by window width.

  116. Question 116Image Production - Image Evaluation

    Excessive edge enhancement applied to a digital radiograph may produce:

    1. halos at tissue interfaces Correct answer.
    2. increased quantum mottle
    3. grid cutoff
    4. geometric magnification

    Explanation

    Edge enhancement increases high-frequency contrast and can create overshoot or halo artifacts at boundaries between tissues. It does not create scatter, grid cutoff, or geometric magnification.

  117. Question 117Image Production - Image Evaluation

    A direct-conversion DR detector with a low fill factor will most likely show:

    1. a decrease in patient radiation dose
    2. an increase in scatter production
    3. reduced resolution and signal capture Correct answer.
    4. an increase in contrast resolution

    Explanation

    Fill factor is the fraction of each pixel area that is sensitive to the signal. A low fill factor reduces the captured signal and can degrade spatial resolution.

  118. Question 118Image Production - Image Evaluation

    A flat-panel DR system produces a straight, vertical band of decreased signal at the same location on every image. The most likely cause is:

    1. a detector column defect Correct answer.
    2. voluntary patient motion
    3. random quantum mottle
    4. peripheral grid cutoff

    Explanation

    A fixed, straight band of abnormal signal that appears in the same location on every image indicates a detector element or column defect. Artifacts from motion or scatter vary with the examination.

  119. Question 119Image Production - Image Evaluation

    A digital detector has pixels that are 0.2 mm wide. Its Nyquist frequency is approximately:

    1. 10.0 line pairs per millimeter
    2. 5.0 line pairs per millimeter
    3. 2.5 line pairs per millimeter Correct answer.
    4. 1.25 line pairs per millimeter

    Explanation

    The Nyquist frequency is calculated as 1 divided by twice the pixel size in millimeters. For a 0.2 mm pixel, 1/(2 × 0.2) equals 2.5 line pairs per millimeter.

  120. Question 120Image Production - Image Evaluation

    A digital radiograph displays a narrow range of pixel values concentrated in the middle of the histogram. The most appropriate postprocessing to improve display contrast is to:

    1. increase the grid ratio
    2. apply a narrower window Correct answer.
    3. apply a wider window width
    4. reduce the receptor exposure

    Explanation

    A narrower window width expands the displayed gray scale over a smaller range of pixel values, increasing displayed contrast. Exposure and grid ratio are acquisition factors and cannot be corrected by display windowing.

  121. Question 121Procedures

    On a standard PA chest radiograph, the central ray is centered at the level of which vertebra?

    1. T3
    2. T10
    3. L1
    4. T7 Correct answer.

    Explanation

    The PA chest central ray is perpendicular to the image receptor and centered at the level of T7, roughly 7 to 8 inches below the vertebra prominens. This centering includes the apices through the costophrenic angles on a 14 x 17 inch receptor.

  122. Question 122Procedures

    For a supine AP abdomen (KUB), the central ray should be centered at the level of which structure?

    1. The iliac crests Correct answer.
    2. The pubic symphysis
    3. The xiphoid process
    4. The greater trochanters

    Explanation

    The supine AP abdomen is centered perpendicular to the image receptor at the level of the iliac crests, which places the kidneys, ureters, and bladder region within a 14 x 17 inch field. The resulting radiograph should extend from the diaphragm to the symphysis pubis.

  123. Question 123Procedures

    For a PA projection of the hand, the central ray is directed to which joint?

    1. The third metacarpophalangeal joint Correct answer.
    2. The first metacarpophalangeal joint
    3. The radiocarpal joint
    4. The second metacarpophalangeal joint

    Explanation

    The PA hand is centered to the third metacarpophalangeal joint with the central ray perpendicular to the image receptor. Centering on the mid-hand ensures all phalanges, metacarpals, and the carpal region fit the receptor.

  124. Question 124Procedures

    When positioning a patient for an AP pelvis, the lower limbs should be:

    1. Crossed at the ankles
    2. Internally rotated 15 to 20 degrees Correct answer.
    3. Externally rotated 45 degrees
    4. Flexed 90 degrees at the knees and hips

    Explanation

    Internal rotation of the lower limbs 15 to 20 degrees places the femoral necks parallel with the image receptor so they appear in profile rather than foreshortened. It also rotates the greater trochanters clear of the femoral necks.

  125. Question 125Procedures

    Which contrast agent is the appropriate choice for a gastrointestinal study when a bowel perforation is suspected?

    1. A gadolinium-based contrast agent
    2. An iodinated water-soluble agent Correct answer.
    3. Carbon dioxide gas
    4. A barium sulfate suspension

    Explanation

    A water-soluble iodinated agent is used when perforation is suspected because it is absorbed and excreted if it leaks into the peritoneal cavity. Barium in the peritoneum incites a severe granulomatous peritonitis and is contraindicated in this setting.

  126. Question 126Procedures

    Which projection of the shoulder demonstrates the greater tubercle in profile?

    1. AP external rotation Correct answer.
    2. AP internal rotation
    3. Transthoracic lateral
    4. Grashey projection

    Explanation

    External rotation of the arm on an AP shoulder places the greater tubercle in profile on the lateral aspect of the humeral head. Internal rotation instead profiles the lesser tubercle.

  127. Question 127Procedures

    Which paranasal sinus group is best demonstrated on a Waters projection?

    1. Frontal sinuses
    2. Sphenoid sinuses
    3. Maxillary sinuses Correct answer.
    4. Ethmoid sinuses

    Explanation

    The Waters projection positions the OML at 37 degrees to the image receptor with the MSP perpendicular, projecting the petrous ridges below the maxillary sinuses. This makes it the standard view for maxillary sinus evaluation.

  128. Question 128Procedures

    For a lateral chest radiograph, the patient's arms should be:

    1. Elevated above the head Correct answer.
    2. Rested on the hips
    3. Extended down and forward
    4. Crossed over the chest

    Explanation

    Elevating the arms above the head or resting the forearms on a support rotates the humeri and scapulae clear of the lung fields. This prevents soft tissue superimposition over the upper thorax.

  129. Question 129Procedures

    The open-mouth (odontoid) projection of the cervical spine is performed primarily to demonstrate which structures?

    1. C6 and C7
    2. C1 and C2 Correct answer.
    3. The cervicothoracic junction
    4. C3 through C5

    Explanation

    Opening the mouth clears the mandible and maxilla from the field so the dens, the lateral masses of C1, and the atlantoaxial joints are demonstrated. The central ray is directed through the open mouth with a slight cephalad angle.

  130. Question 130Procedures

    During a single-contrast upper GI series, which position best demonstrates the duodenal loop?

    1. RAO
    2. LAO
    3. Right lateral
    4. LPO Correct answer.

    Explanation

    The LPO position opens the duodenal loop away from the stomach and spine, allowing barium filling of the entire C-loop to be seen. It is also the position of choice for patients with a hypersthenic habitus.

  131. Question 131Procedures

    The primary purpose of applying ureteral compression during an excretory urogram is to:

    1. Reduce patient radiation dose
    2. Speed the excretion of contrast
    3. Distend the renal pelvis and calyces Correct answer.
    4. Prevent patient motion

    Explanation

    Compression bands applied over the distal ureters impede drainage so contrast accumulates and distends the renal pelves and calyces. This improves visualization of the collecting system during the nephrotomographic and early filling phases.

  132. Question 132Procedures

    The Grashey projection of the shoulder is intended to demonstrate:

    1. The coracoid process
    2. The glenohumeral joint space Correct answer.
    3. The greater tubercle in profile
    4. The acromioclavicular joint

    Explanation

    The Grashey view rotates the patient 35 to 45 degrees so the central ray passes parallel to the plane of the glenoid, opening the glenohumeral joint space. It is used to assess joint space narrowing, dislocation, and degenerative change.

  133. Question 133Procedures

    On an oblique lumbar spine radiograph, the structure known as the 'ear' of the scotty dog corresponds to which anatomic part?

    1. Transverse process
    2. Superior articular process Correct answer.
    3. Inferior articular process
    4. Pars interarticularis

    Explanation

    On a 45 degree oblique lumbar image the superior articular process forms the ear of the scotty dog, the inferior articular process forms the front leg, the pars forms the neck, and the transverse process forms the nose. A defect in the neck indicates spondylolysis.

  134. Question 134Procedures

    Which position best demonstrates the rectum and sigmoid colon during a barium enema?

    1. Trendelenburg
    2. Supine
    3. Prone Correct answer.
    4. Right lateral decubitus

    Explanation

    In the prone position barium flows into the posterior and inferior portions of the colon, filling the rectum and sigmoid. The supine position instead fills the transverse colon and the more anterior segments.

  135. Question 135Procedures

    For an AP projection of the elbow, the forearm should be:

    1. Neutral
    2. Pronated
    3. Supinated Correct answer.
    4. Partially pronated

    Explanation

    Full supination on the AP elbow places the radial head, radial tuberosity, and capitellum in the correct relationship without radial crossover. The hand is palm up with the epicondyles parallel to the image receptor.

  136. Question 136Procedures

    A trauma patient with a suspected cervical spine injury cannot be moved from the stretcher. The initial lateral cervical spine radiograph should be obtained:

    1. Cross-table in the dorsal decubitus position Correct answer.
    2. Standing with weights in both hands
    3. Seated upright with the head rotated 45 degrees
    4. Supine with a 15-degree cephalad angle

    Explanation

    When the patient cannot be upright or turned, a horizontal beam is used with the patient supine to produce a cross-table lateral, which avoids moving the injured spine. Images are evaluated for alignment, and all seven cervical vertebrae plus the C7-T1 junction should be included.

  137. Question 137Procedures

    The Pigg-O-Stat device is used for which of the following?

    1. Supporting a patient during a skull examination
    2. Positioning a patient for a barium enema
    3. Shielding the gonads during a pelvis examination
    4. Immobilizing an infant for a chest radiograph Correct answer.

    Explanation

    The Pigg-O-Stat is a pediatric immobilizer that holds an infant upright with the arms elevated for chest and abdominal radiography. It permits an erect projection while providing restraint and radiation protection.

  138. Question 138Procedures

    Which wrist projection is used specifically to demonstrate the scaphoid?

    1. AP with a 15-degree caudad angle
    2. Lateral with the wrist in extreme flexion
    3. PA with ulnar deviation and cephalad angle Correct answer.
    4. PA with radial deviation and a 15-degree angle

    Explanation

    Ulnar deviation straightens the scaphoid and the 10 to 15 degree cephalad tube angle projects it clear of the other carpal bones. The scaphoid is best evaluated with this dedicated view plus a PA and lateral of the wrist.

  139. Question 139Procedures

    Which patient position is routinely used for an esophagram to project the esophagus clear of the vertebral column?

    1. RAO Correct answer.
    2. Supine AP
    3. LAO
    4. Left lateral

    Explanation

    The RAO position places the esophagus between the vertebral column and the heart, providing a clear view of the barium-filled lumen. The patient is generally examined upright so gravity assists the barium column.

  140. Question 140Procedures

    Why is a myelographic table tilted during a lumbar myelogram?

    1. Reduce patient radiation dose
    2. Direct the flow of contrast Correct answer.
    3. Prevent nausea and vomiting
    4. Improve the patient's comfort

    Explanation

    Hyperbaric contrast medium sinks, so elevating or lowering the head of the table controls where the contrast column pools within the subarachnoid space. This allows the radiologist to fill and evaluate the desired levels while keeping contrast away from the cranial vault.

  141. Question 141Procedures

    Intervertebral foramina of the thoracic spine are best demonstrated on which projection?

    1. Lateral projection Correct answer.
    2. PA oblique at 45 degrees
    3. AP projection
    4. AP oblique at 45 degrees

    Explanation

    Thoracic foramina are directed laterally and are therefore demonstrated on the lateral projection of the thoracic spine. Cervical foramina open obliquely and require 45 degree oblique projections instead.

  142. Question 142Procedures

    The submentovertex (SMV) projection is used primarily to demonstrate:

    1. Zygomatic arches Correct answer.
    2. Maxillary sinuses
    3. Internal auditory canals
    4. Optic foramina

    Explanation

    With the IOML parallel to the image receptor and the central ray perpendicular, the SMV projects the zygomatic arches free of superimposition and also shows the sphenoid sinus. The arches appear as bilateral, laterally curving bony structures.

  143. Question 143Procedures

    A lateral cervical spine radiograph does not include the C7-T1 junction because of shoulder superimposition. Which projection should be added?

    1. Swimmer's lateral projection Correct answer.
    2. Lateral projection with weights
    3. Open-mouth odontoid projection
    4. AP axial projection

    Explanation

    The Swimmer's lateral abducts one arm and superimposes it away from the lower cervical spine, allowing the C7-T1 junction to be seen. It is a compensatory projection used when the standard lateral fails to show all seven vertebrae.

  144. Question 144Procedures

    To project the petrous ridges into the lower third of the orbits on a Waters projection, the head must be positioned with the:

    1. OML at 37 degrees to the IR Correct answer.
    2. MSP at 45 degrees to the IR
    3. IOML parallel to the IR
    4. OML perpendicular to the IR

    Explanation

    Placing the OML at 37 degrees to the image receptor with the MSP perpendicular to the receptor drops the petrous ridges into the lower third of the orbits. This frees the maxillary sinuses from petrous superimposition.

  145. Question 145Procedures

    The contrast medium used for a myelogram is best described as:

    1. An oil-based iodine suspension
    2. A gadolinium-based agent
    3. A barium sulfate suspension
    4. A water-soluble nonionic agent Correct answer.

    Explanation

    Myelography uses a low-osmolar, water-soluble, nonionic iodinated contrast agent that is absorbed from the subarachnoid space and excreted by the kidneys. This formulation minimizes neurotoxicity and reduces the risk of seizures.

  146. Question 146Procedures

    What is the recommended source-to-image receptor distance for a PA projection of the chest?

    1. 72 inches (183 cm) Correct answer.
    2. 40 inches (102 cm)
    3. 60 inches (152 cm)
    4. 48 inches (122 cm)

    Explanation

    A 72-inch (183-cm) SID is standard for PA and lateral chest radiography. The longer distance reduces magnification of the heart and improves recorded detail.

  147. Question 147Procedures

    To what degree is the knee flexed for a lateral projection of the knee?

    1. 20 to 30 degrees Correct answer.
    2. 45 to 60 degrees
    3. 10 to 15 degrees
    4. 90 degrees

    Explanation

    Flexing the knee 20 to 30 degrees opens the joint space and allows the femoral condyles to be superimposed for a true lateral. Greater flexion would rotate the patella and distort the joint.

  148. Question 148Procedures

    Which projection of the foot demonstrates the metatarsals free of superimposition?

    1. AP
    2. Lateral
    3. Medial oblique Correct answer.
    4. Lateral oblique

    Explanation

    Medial rotation of the foot (about 30 degrees) for the AP oblique projection separates the metatarsal shafts. They are then seen without overlapping.

  149. Question 149Procedures

    For an AP supine abdomen, the central ray should be centered at the level of the:

    1. iliac crests Correct answer.
    2. symphysis pubis
    3. lower rib margin
    4. xiphoid process

    Explanation

    The iliac crests correspond to approximately L4-L5 and serve as the centering point for an AP abdomen. This level includes the diaphragm superiorly and the symphysis pubis inferiorly.

  150. Question 150Procedures

    For an AP projection of the cervical spine, the central ray is angled:

    1. 15 degrees caudad
    2. 15 degrees cephalad Correct answer.
    3. 0 degrees (perpendicular)
    4. 20 degrees caudad

    Explanation

    A 15-degree cephalad angle parallels the central ray with the intervertebral disc spaces, which slope downward anteriorly in the lower cervical spine. Without the angle the spaces appear closed.

  151. Question 151Procedures

    An RPO projection of the cervical spine demonstrates which intervertebral foramina?

    1. Left
    2. Right Correct answer.
    3. Neither; only a lateral projection shows them
    4. Both right and left

    Explanation

    In an RPO (anterior oblique) cervical projection, the right side is closest to the image receptor. The intervertebral foramina nearest the image receptor, the right ones, are demonstrated.

  152. Question 152Procedures

    For an AP projection of the pelvis, the lower limbs are internally rotated 15 degrees to:

    1. place the greater trochanters in profile Correct answer.
    2. separate the femoral heads from the acetabula
    3. open the sacroiliac joints
    4. place the lesser trochanters in profile

    Explanation

    Internal rotation of the lower limbs brings the greater trochanters into profile laterally. This prevents foreshortening of the femoral neck and demonstrates its full length.

  153. Question 153Procedures

    For a lateral projection of the skull, which line is perpendicular to the image receptor?

    1. Acanthiomeatal line
    2. Mentomeatal line
    3. Infraorbitomeatal line
    4. Interpupillary line Correct answer.

    Explanation

    With the midsagittal plane parallel to the image receptor, the interpupillary line is perpendicular to it and the infraorbitomeatal line is parallel to the transverse axis. This prevents rotation of the skull.

  154. Question 154Procedures

    For an AP mortise projection of the ankle, the leg is rotated:

    1. Laterally 15 to 20 degrees
    2. No rotation is required
    3. Medially 15 to 20 degrees Correct answer.
    4. Medially 45 degrees

    Explanation

    Medial rotation of 15 to 20 degrees places the medial and lateral malleoli parallel to the image receptor. This opens the mortise joint space.

  155. Question 155Procedures

    During a double-contrast upper GI examination, which position best demonstrates the gastric fundus?

    1. Right lateral
    2. LPO Correct answer.
    3. RAO
    4. Prone

    Explanation

    In the LPO position, barium coats the fundus while air distends it. This gives the double-contrast demonstration of the fundus.

  156. Question 156Procedures

    For a PA projection of the chest, the patient's shoulders are rolled forward to:

    1. reduce magnification of the heart
    2. open the intervertebral disc spaces
    3. increase thoracic kyphosis
    4. move the scapulae clear of the lung fields Correct answer.

    Explanation

    Rolling the shoulders forward rotates the scapulae laterally and away from the lung fields. This prevents them from obscuring the upper lung zones.

  157. Question 157Procedures

    Which radiograph best demonstrates a small pneumothorax?

    1. PA chest on full expiration Correct answer.
    2. PA chest on full inspiration
    3. AP chest supine
    4. Lateral chest

    Explanation

    An expiratory chest radiograph reduces lung volume and increases lung density. The contrast between the pleural air and the denser lung makes a small pneumothorax easier to detect.

  158. Question 158Procedures

    A trauma patient with a suspected hip fracture cannot be turned or moved from the supine position. Which projection is most appropriate?

    1. Cross-table lateral projection Correct answer.
    2. Ventral decubitus projection
    3. Frog-leg lateral projection
    4. AP with 15-degree internal rotation

    Explanation

    A cross-table lateral uses a horizontal beam and can be obtained with the patient supine. This avoids moving the patient and risking displacement of the fracture.

  159. Question 159Procedures

    Which projection best demonstrates the patellofemoral joint space?

    1. PA oblique projection of the knee
    2. Lateral projection of the knee
    3. AP projection of the knee
    4. Tangential (Merchant) projection Correct answer.

    Explanation

    The tangential (Merchant) projection directs the central ray along the patellofemoral joint with the knee flexed. This profiles the joint space between the patella and femur.

  160. Question 160Procedures

    Which position best demonstrates a small amount of free intraperitoneal air in a patient who cannot stand?

    1. Prone
    2. Supine
    3. Right lateral decubitus
    4. Left lateral decubitus Correct answer.

    Explanation

    With the patient on the left side, free air rises to the right flank above the liver, where it is demonstrated with a horizontal beam. This is the preferred position when the patient cannot be upright.

  161. Question 161Radiation Protection

    Which three principles make up the cardinal rules of radiation protection for the radiographer?

    1. ALARA, dose limits, and monitoring
    2. Collimation, filtration, and shielding
    3. kVp, mAs, and filtration
    4. Time, distance, and shielding Correct answer.

    Explanation

    Occupational protection is achieved by limiting the time spent near the source, maximizing the distance from the source, and placing appropriate shielding between the operator and the source. These three principles apply to every exposure, including fluoroscopy and mobile radiography.

  162. Question 162Radiation Protection

    The annual occupational effective dose limit recommended by the NCRP for a radiographer is:

    1. 150 mSv (15 rem)
    2. 50 mSv (5 rem) Correct answer.
    3. 500 mSv (50 rem)
    4. 5 mSv (0.5 rem)

    Explanation

    The NCRP recommends an annual effective dose limit of 50 mSv (5 rem) for occupationally exposed workers. This value applies to the whole body and is intended to keep stochastic risk acceptably low over a working lifetime.

  163. Question 163Radiation Protection

    The effective dose limit for a member of the general public from all man-made sources, excluding medical exposure, is:

    1. 0.5 mSv per year
    2. 50 mSv per year
    3. 1 mSv per year Correct answer.
    4. 5 mSv per year

    Explanation

    The recommended annual effective dose limit for individual members of the public is 1 mSv (0.1 rem). Medical exposures of the individual are excluded from this accounting.

  164. Question 164Radiation Protection

    For a general-purpose x-ray unit operating above 70 kVp, the minimum total filtration required is:

    1. 2.0 mm Al equivalent
    2. 0.5 mm Al equivalent
    3. 1.5 mm Al equivalent
    4. 2.5 mm Al equivalent Correct answer.

    Explanation

    Units that operate above 70 kVp must have a minimum total filtration of 2.5 mm Al equivalent. Added filtration preferentially removes low-energy photons that would otherwise be absorbed in the patient without contributing to the image.

  165. Question 165Radiation Protection

    The primary purpose of gonadal shielding during a radiographic examination is to:

    1. Increase image contrast at the gonads
    2. Reduce scatter reaching the image receptor
    3. Reduce dose to radiosensitive gonadal tissue Correct answer.
    4. Shorten the required exposure time

    Explanation

    Gonadal shielding limits the dose delivered to the most radiosensitive reproductive tissue, thereby reducing the potential for hereditary effects. It is applied whenever the gonads lie in or near the useful beam and the shield will not obscure diagnostic information.

  166. Question 166Radiation Protection

    When a radiographer wears a single personnel dosimeter, it should be worn:

    1. On the wrist of the dominant hand
    2. At waist level beneath the lead apron
    3. At collar level outside the lead apron Correct answer.
    4. Attached to the control panel of the tube

    Explanation

    A single monitor is worn at collar level outside the protective apron so that it estimates dose to the head and neck, which are unshielded and receive the highest occupational exposure. When two monitors are used, the collar badge is worn outside the apron and a second badge is worn at the waist beneath it.

  167. Question 167Radiation Protection

    A stochastic effect of ionizing radiation is one in which:

    1. The effect appears only after a single large exposure
    2. Damage is restricted to the lens of the eye
    3. Severity increases with dose above a threshold
    4. Probability of occurrence increases with dose without a threshold Correct answer.

    Explanation

    Stochastic effects, such as cancer induction and heritable genetic effects, are probabilistic: the chance of occurrence rises with dose while severity does not depend on dose, and no true threshold is assumed. This is the basis for the ALARA philosophy.

  168. Question 168Radiation Protection

    The ALARA principle requires that radiation exposure be:

    1. Measured with a dosimeter during every exposure
    2. Eliminated completely in every examination
    3. Held below the limit set for the general public
    4. Kept as low as reasonably achievable Correct answer.

    Explanation

    ALARA means that all exposures should be kept as low as reasonably achievable, taking economic and social factors into account. It applies even when doses are already well below regulatory limits.

  169. Question 169Radiation Protection

    The recommended equivalent dose limit to the embryo-fetus of a declared pregnant radiographer is:

    1. 15 mSv per month
    2. 5 mSv per month
    3. 50 mSv per month
    4. 0.5 mSv per month Correct answer.

    Explanation

    The NCRP recommends that the equivalent dose to the embryo-fetus from occupational exposure not exceed 0.5 mSv in any month and not exceed 5 mSv over the entire gestation. The radiographer should declare the pregnancy in writing so that monitoring and work assignments can be adjusted.

  170. Question 170Radiation Protection

    The exposure rate at 1 m from a radiation source is 100 mGy/hr. What is the exposure rate at 4 m from the same source?

    1. 25 mGy/hr
    2. 50 mGy/hr
    3. 1.56 mGy/hr
    4. 6.25 mGy/hr Correct answer.

    Explanation

    Intensity follows the inverse square law, so it varies inversely with the square of the distance. Increasing distance from 1 m to 4 m is a factor of four, so the intensity is divided by 16, giving 6.25 mGy/hr.

  171. Question 171Radiation Protection

    An x-ray beam has a half-value layer of 2 mm Al. What thickness of aluminum reduces the beam intensity to 12.5% of its original value?

    1. 2 mm Al
    2. 5 mm Al
    3. 4 mm Al
    4. 6 mm Al Correct answer.

    Explanation

    Each half-value layer removes 50% of the remaining photons, so 12.5% transmission equals three half-value layers (100% to 50% to 25% to 12.5%). With an HVL of 2 mm Al, three layers require 6 mm Al.

  172. Question 172Radiation Protection

    If kVp is increased by 15% and mAs is reduced by one half, the result is that:

    1. Receptor exposure is unchanged and patient dose increases
    2. Receptor exposure decreases and patient dose decreases
    3. Receptor exposure doubles and patient dose increases
    4. Receptor exposure is unchanged and patient dose decreases Correct answer.

    Explanation

    A 15% increase in kVp approximately doubles receptor exposure, so halving mAs restores the original exposure level. Because fewer x-rays are required to achieve that exposure, the absorbed dose to the patient is reduced.

  173. Question 173Radiation Protection

    Reducing the collimated field size from 14 x 17 inches to 8 x 10 inches, with technique adjusted to maintain receptor exposure, will:

    1. Reduce patient dose and scatter Correct answer.
    2. Increase patient dose and image contrast
    3. Reduce patient dose and magnify the image
    4. Increase patient dose and reduce scatter

    Explanation

    Smaller fields irradiate a smaller volume of tissue, so both the patient's integral dose and the amount of scattered radiation produced decrease. Less scatter also improves image contrast.

  174. Question 174Radiation Protection

    Changing from an 8:1 grid to a 16:1 grid while maintaining the same receptor exposure will:

    1. Reduce patient dose
    2. Increase patient dose Correct answer.
    3. Reduce the required mAs
    4. Have no effect on patient dose

    Explanation

    A higher grid ratio removes more scattered radiation, so more mAs is required to maintain receptor exposure. The increased mAs raises the absorbed dose to the patient.

  175. Question 175Radiation Protection

    Protective aprons used in general radiography must provide a minimum lead equivalent of:

    1. 0.25 mm Pb
    2. 0.5 mm Pb Correct answer.
    3. 0.75 mm Pb
    4. 0.35 mm Pb

    Explanation

    A minimum of 0.5 mm lead equivalent is required for protective aprons used during general radiographic and fluoroscopic procedures. Aprons should be inspected annually and with fluoroscopy for cracks and defects.

  176. Question 176Radiation Protection

    The maximum permitted leakage radiation from an x-ray tube housing is:

    1. 0.1 mGy/hr at 1 m
    2. 1 mGy/hr at 1 m Correct answer.
    3. 10 mGy/hr at 0.5 m
    4. 5 mGy/hr at 1 m

    Explanation

    Leakage radiation from the tube housing must not exceed 1 mGy (100 mR) per hour at 1 m from the source when the tube is operated at its maximum rated conditions. This limit protects both the patient and personnel from radiation that escapes outside the useful beam.

  177. Question 177Radiation Protection

    For mobile radiography, the minimum source-to-skin distance is:

    1. 15 inches (38 cm)
    2. 12 inches (30 cm) Correct answer.
    3. 6 inches (15 cm)
    4. 18 inches (45 cm)

    Explanation

    Mobile and portable units must maintain a source-to-skin distance of at least 12 inches (30 cm) to limit skin dose and preserve image quality. Fixed fluoroscopic units require a minimum of 15 inches.

  178. Question 178Radiation Protection

    Which fluoroscopic feature reduces dose by displaying the most recently acquired image without additional radiation exposure?

    1. Last-image hold Correct answer.
    2. Continuous cine recording
    3. High-level control mode
    4. Magnification mode

    Explanation

    Last-image hold allows the physician to study the final frame while the beam is off, reducing fluoroscopic time and therefore both patient and personnel dose. It is one of the most effective dose-reduction tools in fluoroscopy.

  179. Question 179Radiation Protection

    Which technique change best reduces radiation dose for a small pediatric patient?

    1. Use a higher-ratio grid
    2. Remove the grid and use higher kVp Correct answer.
    3. Decrease source-to-image distance
    4. Increase mAs and decrease kVp

    Explanation

    Small patients produce little scatter, so the grid can often be removed, allowing a higher kVp and much lower mAs. This substantially reduces absorbed dose while preserving image quality.

  180. Question 180Radiation Protection

    A patient who undergoes a prolonged fluoroscopic procedure develops skin erythema several weeks later. This reaction is classified as:

    1. An indirect effect of ionization
    2. A stochastic effect
    3. A deterministic effect Correct answer.
    4. A somatic genetic effect

    Explanation

    Deterministic effects, also called tissue reactions, have a threshold and their severity increases with dose. Skin erythema appearing weeks after a high-dose procedure is a classic deterministic response.

  181. Question 181Radiation Protection

    Dose area product (DAP) is expressed in units of:

    1. C/kg
    2. mSv
    3. mGy
    4. Gy·cm² Correct answer.

    Explanation

    Dose area product combines the dose in air with the area of the beam, so its units are dose multiplied by area (Gy·cm²). It is a practical indicator of total patient risk in fluoroscopy because it captures both dose and field size.

  182. Question 182Radiation Protection

    A barrier designed to attenuate only leakage radiation and scattered radiation is classified as:

    1. A secondary barrier Correct answer.
    2. An occupancy barrier
    3. A controlled-area barrier
    4. A primary barrier

    Explanation

    Primary barriers must stop the useful beam and are placed where the beam can strike, such as the floor under a table or a wall behind a wall stand. Secondary barriers protect against leakage and scatter and require less lead because those radiations are far less intense.

  183. Question 183Radiation Protection

    Effective dose is calculated by:

    1. Averaging dose across all tissues
    2. Dividing dose by a weighting factor
    3. Summing weighted tissue doses Correct answer.
    4. Multiplying dose by exposure time

    Explanation

    Effective dose multiplies the equivalent dose in each irradiated tissue by that tissue's weighting factor and sums the products. The result reflects the overall radiation detriment and allows comparison of exposures involving different body parts.

  184. Question 184Radiation Protection

    The exposure linearity test requires that the output per mAs at adjacent mA stations vary by no more than:

    1. 20%
    2. 10% Correct answer.
    3. 5%
    4. 15%

    Explanation

    Exposure linearity requires that the exposure per mAs stay within 10% across adjacent mA stations when other factors are held constant. This protects the patient from unintended overexposure when technique settings are changed.

  185. Question 185Radiation Protection

    During fluoroscopy, the patient is the main source of occupational exposure because:

    1. The table transmits the primary beam
    2. The image receptor emits stored energy
    3. Leakage radiation escapes the tube housing
    4. Scattered photons leave the patient in all directions Correct answer.

    Explanation

    X-rays interacting in the patient's tissues by Compton scatter are deflected in every direction, including toward the operator standing at the tableside. This is why distance from the patient and shielding between the operator and the patient are more important than shielding near the tube.

  186. Question 186Radiation Protection

    The SI unit of absorbed dose is the:

    1. gray Correct answer.
    2. becquerel
    3. sievert
    4. coulomb per kilogram

    Explanation

    Absorbed dose is the energy deposited per unit mass and is expressed in gray, where 1 Gy equals 1 joule per kilogram. The sievert is used for equivalent and effective dose, the becquerel for radioactivity, and coulomb per kilogram for exposure in air.

  187. Question 187Radiation Protection

    The annual occupational effective dose limit for a radiographer is:

    1. 500 mSv (50 rem)
    2. 50 mSv (5 rem) Correct answer.
    3. 150 mSv (15 rem)
    4. 5 mSv (0.5 rem)

    Explanation

    The recommended annual effective dose limit for occupationally exposed workers is 50 mSv (5 rem). The 150 mSv value applies to the lens of the eye, and 500 mSv applies to the skin and extremities.

  188. Question 188Radiation Protection

    The largest contributor to natural background radiation exposure in the United States is:

    1. radon gas Correct answer.
    2. internal radionuclides
    3. terrestrial radiation
    4. cosmic radiation

    Explanation

    Radon and its decay products account for roughly half of the average natural background dose in the United States. Cosmic radiation, terrestrial radiation, and internally deposited radionuclides contribute smaller portions.

  189. Question 189Radiation Protection

    Gonadal shielding is applied primarily to:

    1. reduce dose to the reproductive organs Correct answer.
    2. shield the radiographer from primary radiation
    3. improve contrast in the pelvic image
    4. reduce scatter reaching the image receptor

    Explanation

    Gonadal shielding reduces radiation dose to the radiosensitive reproductive organs and therefore lowers the genetic risk from the examination. It is not used to improve contrast or to protect the radiographer from primary radiation.

  190. Question 190Radiation Protection

    The annual equivalent dose limit for the lens of the eye of an occupationally exposed radiographer is:

    1. 500 mSv (50 rem)
    2. 50 mSv (5 rem)
    3. 15 mSv (1.5 rem)
    4. 150 mSv (15 rem) Correct answer.

    Explanation

    The annual equivalent dose limit for the lens of the eye is 150 mSv (15 rem). The 50 mSv value is the whole-body effective dose limit, and 500 mSv is the limit for skin and extremities.

  191. Question 191Radiation Protection

    The annual effective dose limit for a member of the general public is:

    1. 50 mSv (5 rem)
    2. 5 mSv (0.5 rem)
    3. 1 mSv (0.1 rem) Correct answer.
    4. 0.1 mSv (0.01 rem)

    Explanation

    The annual effective dose limit for the general public is 1 mSv (0.1 rem). This limit is lower than the occupational limit because the public includes children and other more radiosensitive individuals.

  192. Question 192Radiation Protection

    A general-purpose x-ray tube operated above 70 kVp must have a minimum total filtration of:

    1. 2.5 mm Al Correct answer.
    2. 3.5 mm Al
    3. 0.5 mm Al
    4. 1.5 mm Al

    Explanation

    Total filtration includes inherent filtration plus added filtration, and units operating above 70 kVp require at least 2.5 mm aluminum equivalent. Adequate filtration removes low-energy photons that would otherwise increase patient skin dose without contributing to the image.

  193. Question 193Radiation Protection

    The radiation weighting factor (quality factor) for alpha particles is:

    1. 1
    2. 2
    3. 20 Correct answer.
    4. 5

    Explanation

    Alpha particles are high-LET radiation and have a radiation weighting factor of 20, reflecting their greater biological effectiveness per unit absorbed dose. X-rays and gamma rays have a weighting factor of 1.

  194. Question 194Radiation Protection

    The cumulative fluoroscopic timer must sound an audible alarm after:

    1. 5 minutes of fluoroscopy time Correct answer.
    2. 30 seconds of fluoroscopy time
    3. 1 minute of fluoroscopy time
    4. 10 minutes of fluoroscopy time

    Explanation

    Fluoroscopic equipment must provide a cumulative timer that alarms after 5 minutes of fluoroscopy time. The timer helps the operator track total beam-on time and supports the ALARA principle.

  195. Question 195Radiation Protection

    In fluoroscopy, selecting a magnification mode typically:

    1. reduces scatter to the image receptor
    2. increases patient dose Correct answer.
    3. has no effect on patient dose
    4. decreases patient dose by narrowing the beam

    Explanation

    Magnification uses a smaller portion of the image receptor's input area, so the exposure rate must increase to maintain brightness. This concentrates radiation on a smaller area and increases patient dose.

  196. Question 196Radiation Protection

    For a chest radiograph, changing from AP to PA projection generally reduces dose to the:

    1. lungs
    2. breast tissue Correct answer.
    3. heart
    4. thoracic spine

    Explanation

    In the PA projection, breast tissue is closer to the image receptor and farther from the entrance surface, so it receives a lower dose than in the AP projection. This is a key reason PA chest positioning is preferred when the patient can cooperate.

  197. Question 197Radiation Protection

    Pulsed fluoroscopy reduces patient dose primarily by:

    1. removing the added filtration
    2. reducing the number of x-ray pulses per second Correct answer.
    3. shortening the source-to-skin distance
    4. increasing the kVp during each pulse

    Explanation

    Pulsed fluoroscopy reduces dose by producing fewer x-ray pulses per second, lowering the total beam-on time. Increasing kVp, shortening distance, or removing filtration would not reduce dose in this way.

  198. Question 198Radiation Protection

    In fluoroscopy, the maximum exposure rate permitted in the high-level control mode is:

    1. 10 R/min (0.1 Gy/min)
    2. 5 R/min (0.05 Gy/min)
    3. 40 R/min (0.4 Gy/min)
    4. 20 R/min (0.2 Gy/min) Correct answer.

    Explanation

    High-level control allows fluoroscopic exposure rates up to 20 R/min (0.2 Gy/min) and requires continuous intentional activation by the operator. Standard fluoroscopy is limited to 10 R/min, so the high-level value is double that.

  199. Question 199Radiation Protection

    The annual equivalent dose limit for the skin and extremities of an occupationally exposed worker is:

    1. 500 mSv (50 rem) Correct answer.
    2. 1 mSv (0.1 rem)
    3. 150 mSv (15 rem)
    4. 50 mSv (5 rem)

    Explanation

    The annual equivalent dose limit for the skin and extremities is 500 mSv (50 rem). The lens of the eye has a lower limit, and the whole-body effective dose limit is 50 mSv.

  200. Question 200Radiation Protection

    Using a risk estimate of about 5% per sievert, an effective dose of 10 mSv corresponds to an additional fatal cancer risk of approximately:

    1. 1 in 2,000 Correct answer.
    2. 1 in 1,000
    3. 1 in 100,000
    4. 1 in 2

    Explanation

    A risk of 5% per sievert equals 0.05 per 1,000 mSv, so 10 mSv yields 0.0005, or 1 in 2,000. This illustrates why effective dose is used to express stochastic risk.

ARRT Radiography flashcards

32 cards. Read the term and the definition here. The deck at the top of this page is optional.

Normal adult heart rate
The typical resting heart rate for an adult is 60 to 100 beats per minute; below 60 is bradycardia and above 100 is tachycardia.
Nasal cannula oxygen flow
A nasal cannula delivers oxygen at 1 to 6 liters per minute, producing an inspired oxygen concentration of approximately 24% to 44%.
Sterile field border rule
The outer 1-inch (2.5 cm) border of a sterile drape is considered non-sterile, and any item touching it or held below table level is contaminated.
Airborne precautions requirements
Airborne precautions require a negative-pressure room with a closed door and an N95 respirator for staff, and are used for tuberculosis, measles, and varicella.
Contrast premedication schedule
A patient with a prior contrast reaction typically receives prednisone 50 mg by mouth at 13, 7, and 1 hour before, plus diphenhydramine 50 mg one hour before.
Extravasation first response
When contrast extravasates, stop the injection, disconnect the tubing, elevate the limb, apply a compress per policy, and document and monitor the site.
Fifteen percent rule
Increasing kVp by 15% doubles receptor exposure, so mAs is halved; decreasing kVp by 15% halves exposure, so mAs must be doubled.
Density maintenance formula
The relationship mAs1 divided by mAs2 equals (SID2 divided by SID1) squared keeps receptor exposure constant when the source-to-image distance changes.
Heat unit calculation
Heat units equal kVp times mA times seconds times a waveform factor of 1.0 for single-phase full-wave and high-frequency generators, and about 1.35 to 1.41 for three-phase.
Grid conversion factors
To maintain exposure when adding a grid, multiply mAs by 2 for 5:1, 3 for 6:1, 4 for 8:1, 5 for 12:1, and 6 for 16:1.
Anode heel effect
X-ray intensity is lower on the anode side of the beam, so the thicker portion of the anatomy should be placed toward the cathode side.
Magnification factor formula
Magnification equals source-to-image distance divided by source-to-object distance; increasing object-to-image distance or decreasing SID increases magnification and reduces detail.
Minimum total filtration
X-ray tubes operating above 70 kVp require at least 2.5 mm aluminum equivalent total filtration, while units limited to 70 kVp require 0.5 to 1.5 mm.
Deviation index formula
The deviation index equals ten times the base-ten logarithm of exposure index divided by target exposure index; values within plus or minus three are acceptable.
Quantum mottle cause
A grainy, mottled appearance results from too few x-ray photons reaching the receptor, usually from insufficient mAs, excessive filtration, or a high speed class.
Brightness versus receptor exposure
Brightness is the luminance displayed on a digital monitor and is adjusted at the workstation, unlike film density, which was controlled by the exposure reaching the film.
Subject contrast determinants
Subject contrast depends on the thickness, density, and atomic number of the tissues being imaged, along with kVp and the presence of contrast medium.
Rotation on PA chest
Equidistant clavicular heads and symmetric sternoclavicular joints indicate no rotation, while asymmetry between the two sides indicates patient rotation.
Spatial resolution definition
Spatial resolution is the ability to image small objects that have high subject contrast, improved by small focal spots, short object-to-image distance, and no motion.
Sternal angle landmark
The sternal angle, or angle of Louis, lies at the T4–T5 level at the carina and is used for centering thoracic spine and chest projections.
Iliac crest landmark
The iliac crest corresponds to the L4–L5 level, which is also approximately the level of the umbilicus and is used to center lumbar spine and abdominal studies.
Barium contraindication
Barium sulfate is contraindicated when bowel perforation or obstruction is suspected; a water-soluble iodinated agent such as Gastrografin is used instead.
PA chest positioning
The PA chest is performed at 72 inches SID with the patient upright, chin elevated, and shoulders rolled forward to move the scapulae off the lung fields.
Double-contrast barium enema
Barium plus air distends the colon and coats the mucosa so small polyps can be seen; it is contraindicated in toxic megacolon and suspected perforation.
Orbitomeatal line definition
The orbitomeatal line runs from the outer canthus of the eye to the external auditory meatus, and the infraorbitomeatal line runs from the infraorbital margin to the meatus.
Nonionic contrast advantage
Nonionic, low-osmolar iodinated contrast produces fewer osmolality-related side effects and less chemotoxicity than ionic agents, but it costs more.
Occupational dose limit
The annual effective dose limit for radiation workers is 50 mSv (5 rem), with a lens-of-eye limit of 150 mSv and a skin and extremity limit of 500 mSv.
Public dose limit
The annual effective dose limit for the general public is 1 mSv (0.1 rem), and the limit for an embryo-fetus of a declared pregnant worker is 0.5 mSv per month.
ALARA principle
ALARA means keeping exposures as low as reasonably achievable, balancing every dose reduction measure against the image quality required for an accurate diagnosis.
Inverse square law distance
Radiation intensity is inversely proportional to the square of the distance from the source, so doubling the distance reduces the dose rate to one quarter.
Dosimeter placement
A whole-body personnel dosimeter is worn at collar level outside the lead apron, and a second badge may be worn beneath the apron to estimate dose to shielded tissues.
Fluoroscopy cumulative timer
Fluoroscopic equipment must signal the operator after 5 minutes of cumulative fluoroscopic exposure during a procedure so that dose can be assessed and limited.

ARRT Radiography study guide

Patient Care and Education

Core concepts

Patient care questions usually test process discipline, not obscure trivia. Every encounter begins with two independent identifiers - name plus date of birth or medical record number - stated by the patient, not read off the requisition. Room number, position, and the wristband alone are never sufficient. Confirm pregnancy status per policy, verify allergies before any contrast medium, and remember that informed consent is the physician's responsibility; the technologist may witness a signature but does not explain risks or benefits.

Communication must be age-appropriate and documented. Explain what will happen, how long it takes, and what the patient must do. Use teach-back for breathing instructions. For pediatric patients, use the least restraint necessary and allow a parent present when policy permits.

Know standard precautions: hand hygiene before and after every patient, gloves for contact with blood or body fluids, and additional isolation precautions per the posted signage. Sterile technique requires that sterile surfaces touch only sterile surfaces and that the field remain above waist level and in view.

Prepare for emergencies: recognize anaphylactoid contrast reactions (urticaria, wheezing, hypotension), know where the crash cart, oxygen, and suction are, and call for help before beginning treatment. A baseline set of vital signs matters for patients prone to hypotension.

Traps

  • Selecting the wrong patient because two people share a name - always ask, never offer.
  • Explaining risks to obtain "consent" yourself.
  • Discussing findings or a diagnosis with the patient.
  • Skipping hand hygiene because gloves are worn.
  • Transferring a patient alone when a second person is available.

Rule of thumb

Two-identifier rule: if you cannot confirm two identifiers from a source independent of the requisition, stop the exam.

Example: A patient in a wheelchair says, "I'm here for my knee." Confirm name and date of birth against the armband and have the patient state them.

Image Production: Equipment and Image Acquisition

Core concepts

In the tube, the cathode filament emits electrons; the actual focal spot is the bombarded area and the effective focal spot is its projection. A smaller effective focal spot sharpens detail but concentrates heat. Anode angle and the line-focus principle explain the anode heel effect: the beam is less intense on the anode side, so place thicker anatomy under the cathode.

mA × time = mAs, which controls photon quantity and therefore receptor exposure and patient dose. kVp controls penetration and photon energy and influences contrast: higher kVp generally means lower contrast, more scatter, and lower patient dose for equal receptor exposure. Filtration (about 2.5 mm Al equivalent total) removes low-energy photons; HVL describes beam quality.

Geometry drives recorded detail: SID, OID, and focal spot size matter, and magnification rises with the OID/SOD ratio.

Grids are described by ratio and frequency; off-level or off-center grids cause cutoff. AEC terminates exposure at a preset receptor exposure, with density controls trimmable and a backup timer as a safety net.

Digital systems: CR uses photostimulable phosphor plates; DR uses flat panels with direct or indirect conversion. Pixel size, matrix size, and fill factor set spatial resolution; DQE describes conversion efficiency.

Traps

  • Believing mAs changes contrast - it changes quantity, not the energy spectrum shape.
  • Forgetting the inverse-square law when SID changes.
  • Assuming higher kVp always raises dose (it lowers it when mAs is reduced).
  • Ignoring the heel effect on large body parts.
  • Confusing actual with effective focal spot.

Rule of thumb

15% kVp rule: raising kVp about 15% while halving mAs keeps receptor exposure roughly constant and lowers patient dose.

Example: 70 kVp at 20 mAs becomes 80 kVp at 10 mAs.

Image Production: Image Evaluation

Core concepts

Image evaluation asks two questions: is the image diagnostic, and does it meet acceptance criteria? Assess correct patient and part, positioning and alignment, collimation, marker placement, exposure (brightness/density), contrast, spatial resolution, distortion, and artifacts.

In digital imaging, receptor exposure is decoupled from display brightness. Read the exposure indicator: CR reports an EI; DR reports a deviation index, DI = 10 log(EI/EI target). DI 0 is on target, +3 is about twice the target exposure, and −3 is about half. An overexposed digital image can look perfectly acceptable on the monitor, so never judge dose by appearance alone.

Noise comes from quantum mottle when too few photons reach the receptor; electronic noise dominates at very low exposure. Contrast depends on kVp, scatter, part thickness, and window/level settings. Motion and misalignment cause blur; tube angulation causes shape distortion (foreshortening or elongation); excess OID causes magnification.

Common artifacts include grid lines, panel or plate defects, clothing and jewelry, processing errors, and ghosting. Repeat analysis classifies rejects as technique, positioning, motion, equipment, or processing.

Pathology alters attenuation: additive processes (sclerosis, effusion, mass) need more exposure; destructive processes (osteoporosis, emphysema, lytic lesions) need less.

Traps

  • Calling a digital image "too dark" when it is windowed incorrectly.
  • Treating EI or DI as a measure of patient dose - it is an exposure index.
  • Missing collimation that excludes required anatomy.
  • Blaming motion on the patient without checking immobilization.
  • Overlooking a missing or reversed side marker.

Rule of thumb

If DI falls outside roughly ±3, investigate the cause before repeating, and document it.

Example: DI = −3 on a lateral knee means the receptor received about half the target exposure - check collimation and mAs.

Procedures

Core concepts

Procedures questions test projection selection, landmarks, and adaptation. Know the routines: chest PA and lateral (upright, 72-inch SID, full inspiration, apices through costophrenic angles); abdomen supine, upright, or decubitus (upright includes diaphragm to symphysis pubis); extremities with AP, oblique, and lateral views, including both joints when the long bone is the study; spine with appropriate SID and obliques; skull and sinus series; GI and GU contrast studies; and mobile or fluoroscopic examinations.

Positioning principles: place the part closest to the receptor, center the part to the receptor, align the beam perpendicular, rotate the patient precisely, and collimate to the anatomy. Breathing instructions matter: full inspiration for chest, suspended expiration for abdomen or when motion must be stopped.

Contrast exams require allergy screening, consent by the physician, bowel preparation per protocol, and knowledge of barium versus water-soluble iodinated media. Fluoroscopy adds dynamic evaluation and higher occupational dose - wear a lead apron, use pulsed or low-dose modes, and collimate tightly.

Adapt to the patient: trauma (do not move suspected fractures; use cross-table laterals), pediatrics (short exposure times, immobilization, careful shielding), and geriatrics (skin fragility, hearing loss, positioning aids). Document any deviation from the routine.

Traps

  • Confusing AP and PA chest - PA reduces heart magnification and breast/thyroid dose.
  • Ordering a decubitus view without a horizontal beam.
  • Removing splints or dressings without an order.
  • Omitting the second joint on a long-bone image.
  • Insisting on an upright abdomen when the patient cannot stand - use a decubitus instead.

Rule of thumb

Center, collimate, then confirm: part–receptor alignment, perpendicular beam, and all required anatomy in the field before exposing.

Example: For a suspected hip fracture, obtain an AP hip/pelvis and a cross-table (dorsal decubitus) lateral rather than rolling the patient.

Radiation Protection

Core concepts

Protection content is heavily tested because it is regulatory and quantitative. Know ALARA and the three cardinal principles: time, distance, and shielding. Exposure falls with the inverse square of distance - double the distance, quarter the dose.

Occupational limits as commonly taught from NCRP guidance: effective dose 50 mSv (5 rem) per year; lens 150 mSv (15 rem) per year; extremity and skin 500 mSv (50 rem) per year. Public exposure: 1 mSv (0.1 rem) per year; embryo/fetus: 5 mSv (0.5 rem) over gestation. Limits are annual, not lifetime cumulative caps, and exclude background radiation and the worker's own medical exposure as a patient.

Protective practice: collimate to the part, use the highest kVp consistent with needed contrast while reducing mAs, avoid repeats, follow shielding policy, and stand behind a barrier during mobile exams. Never hold a patient unless it is a genuine emergency, and then wear lead and have the exposure documented.

Personnel monitoring: badges are worn at collar level outside the apron, with a second badge under the apron when dose is expected to be high. Pregnant workers may voluntarily declare pregnancy to receive dose monitoring.

Know the vocabulary: primary versus secondary (scatter and leakage) radiation; ESE, DAP, and effective dose measure different quantities. Pediatric patients carry higher risk per unit dose - reduce mAs and collimate aggressively.

Traps

  • Treating the 50 mSv limit as a cumulative lifetime maximum.
  • Wearing the primary badge under a lead apron.
  • Assuming a lead apron eliminates all dose.
  • Choosing low kVp "for safety" - it raises patient dose.
  • Ignoring scatter from the patient as an operator dose source.

Rule of thumb

Distance beats shielding: step back before reaching for an apron.

Example: Moving from 1 m to 2 m from a scatter source cuts exposure to roughly 25%.

ARRT Radiography cheat sheet

Quick reference

Patient Care and Education

  • Normal adult vital signs: heart rate 60–100 beats/min, respirations 12–20/min, oral temperature 36.1–37.8 °C (97–100 °F), blood pressure below 120/80 mmHg.

  • Oxygen delivery: nasal cannula 1–6 L/min (24–44% FiO2), simple face mask 6–10 L/min (35–55%), nonrebreather mask 10–15 L/min (60–95%).

  • Orthopnea is difficulty breathing when supine, so the patient is imaged upright or semi-upright; dyspnea is labored breathing in any position.

  • Informed consent requires capacity, disclosure of risks/benefits/alternatives, comprehension, and voluntariness; the radiographer witnesses the signature but does not obtain consent.

  • Contrast premedication for a prior reactor: prednisone 50 mg by mouth at 13, 7, and 1 hour before injection, plus diphenhydramine 50 mg by mouth 1 hour before.

  • Transmission-based precautions: contact (gown and gloves), droplet (surgical mask, private room), airborne (N95 respirator, negative-pressure room, closed door).

  • Over-the-needle catheter gauges are inverse to size: 14–18 G for rapid fluid or power-injected contrast, 22–24 G for routine small-volume injections.

  • Extravasation response: stop the injection, disconnect tubing, elevate the limb, apply a compress per department policy, then document and monitor the site.

  • Surgical asepsis: a sterile field is contaminated by contact with its 1-inch outer border, the table edge, non-sterile persons, or any item held below waist level.

Quick reference

Image Production - Equipment and Image Acquisition

  • mAs controls receptor exposure (photon quantity); kVp controls contrast and penetrability. A 15% increase in kVp doubles receptor exposure, so halve the mAs.

  • Density maintenance formula: mAs1/mAs2 = (SID2/SID1)²; inverse square law: intensity is proportional to 1 divided by distance squared.

  • Heat units: HU = kVp × mA × seconds × waveform factor, where factor is 1.0 for single-phase full-wave and high-frequency, 1.35 for three-phase 6-pulse, 1.41 for 12-pulse.

  • Grid conversion factors (mAs multiplier): no grid 1, 5:1 = 2, 6:1 = 3, 8:1 = 4, 12:1 = 5, 16:1 = 6.

  • Anode heel effect: intensity is lower on the anode side of the beam, so the thicker portion of the anatomy is placed toward the cathode side.

  • Magnification factor = SID ÷ SOD; increasing object-to-image distance or decreasing SID enlarges the image and reduces recorded detail.

  • Minimum total filtration is 2.5 mm aluminum equivalent for units operating above 70 kVp; 0.5–1.5 mm Al equivalent for units limited to 70 kVp or less.

  • AEC uses ionization chambers to terminate exposure at a preset receptor dose; minimum response time sets the shortest possible exposure, and density controls shift the calibration ±.

  • Detector metrics: fill factor and DQE describe conversion efficiency, MTF describes resolution; collimating to the anatomy lowers scatter, raises contrast, and reduces patient dose.

Quick reference

Image Production - Image Evaluation

  • Deviation index: DI = 10 log10(EI ÷ target EI); a DI within ±3 is acceptable, while a larger magnitude indicates over- or underexposure requiring review or repeat.

  • Quantum mottle (noise) is caused by too few photons reaching the receptor: low mAs, high speed class, excessive filtration, or excessive distance.

  • Spatial resolution improves with a small focal spot, short object-to-image distance, long SID, small pixel pitch, and patient immobilization.

  • Size distortion is caused by magnification; shape distortion is caused by misalignment of tube, part, and receptor, producing elongation or foreshortening.

  • Subject contrast depends on tissue thickness, density, and atomic number plus kVp and contrast medium; displayed contrast can be altered by post-processing.

  • Rotation on a PA chest: equidistant clavicular heads and symmetric sternoclavicular joints indicate no rotation; asymmetry indicates rotation.

  • Scatter production increases with higher kVp, larger field size, greater patient thickness, and no grid; scatter adds fog and lowers image contrast.

  • Adequacy criteria: anatomy of interest fully included, collimation visible, no motion, correct centering and rotation, adequate inspiration (9–10 posterior ribs on chest), exposure indicator in range.

  • CR histogram error occurs when the beam is not collimated to the anatomy of interest or when unexpected material is on the plate, shifting the values of interest and the exposure indicator.

Quick reference

Procedures

  • PA chest: 72-inch (183 cm) SID, upright, chin elevated, shoulders rolled forward, centering at T7, exposure at the end of the second full inspiration.

  • Positioning levels: jugular notch T2–T3, sternal angle (angle of Louis) T4–T5, xiphoid process T9–T10, iliac crest L4–L5, ASIS S1–S2.

  • Barium sulfate is contraindicated when perforation or obstruction is suspected; a water-soluble iodinated agent (Gastrografin) is used instead.

  • Double-contrast barium enema: barium coats the mucosa while air distends the colon, demonstrating small polyps; contraindicated in toxic megacolon and suspected perforation.

  • Skull lines: OML runs from the outer canthus to the external auditory meatus; IOML runs from the infraorbital margin to the EAM; GAL runs from glabella to alveolar process.

  • Nonionic low-osmolar iodinated contrast has lower osmolality and chemotoxicity, produces fewer adverse reactions, and costs more than ionic agents.

  • Arthrography injects contrast, sometimes with air for double contrast, into a joint capsule; most commonly performed on the shoulder and knee.

  • Esophagram evaluates swallowing and esophageal motility; an upper GI series with barium evaluates the stomach and duodenum, typically with the patient NPO for 8 hours beforehand.

Quick reference

Radiation Protection

  • Dose limits (NCRP): occupational effective dose 50 mSv/yr (5 rem); lens of eye 150 mSv/yr; skin and extremities 500 mSv/yr; general public 1 mSv/yr; embryo-fetus 0.5 mSv in any month.

  • ALARA: exposures are kept as low as reasonably achievable by weighing dose reduction against the image quality needed for diagnosis.

  • Cardinal principles: minimize time, maximize distance (dose falls with the square of distance), and use shielding such as lead aprons and barriers.

  • Personnel monitoring: the whole-body dosimeter is worn at collar level outside the lead apron; a second badge worn under the apron estimates dose to the protected tissues.

  • Fluoroscopy: the cumulative timer alarms at 5 minutes of fluoroscopic exposure; last-image hold and pulsed fluoroscopy reduce patient and staff dose.

  • Collimation and added filtration reduce patient dose, whereas grids, higher mAs, and repeat exposures increase it.

  • Protective aprons and thyroid shields must be at least 0.5 mm lead equivalent, attenuating roughly 90% of scattered radiation at diagnostic energies.

  • Entrance skin exposure is highest at the skin surface and decreases with depth, while dose area product reflects the total radiation energy delivered to the patient.

ARRT Radiography key terms

Informed consent

A patient's voluntary agreement to a procedure after being told its purpose, risks, benefits, alternatives, and the consequences of refusing. It is obtained by the person who will actually perform the procedure.

Medical asepsis

Practices that lower the number of microorganisms and prevent their spread, such as hand hygiene, clean gloves, and disinfecting surfaces. It is used for every patient contact, not only invasive procedures.

Related: Surgical asepsis
Surgical asepsis

Also called sterile technique: keeping objects and the immediate area completely free of microorganisms. It is required for invasive tasks such as urinary catheter insertion, wound care, or any procedure that breaks the skin.

Related: Medical asepsis
Vasovagal response

A sudden reflex drop in heart rate and blood pressure that causes fainting. Common triggers are pain, anxiety, prolonged standing, or the sight of blood; the patient should be eased to the floor or a bed.

Related: Anaphylaxis
Extravasation

Leakage of injected contrast medium or fluid out of the vein and into the surrounding soft tissue. Signs include pain, swelling, and tightness at the site; the injection must be stopped right away.

Related: Anaphylaxis
Anaphylaxis

A severe, rapid, whole-body allergic reaction marked by hives, swelling, wheezing, and falling blood pressure. It is a medical emergency requiring epinephrine and activation of the emergency response team.

Related: Vasovagal response, Extravasation
mAs

Milliampere-seconds, the product of tube current and exposure time. It sets the number of x-ray photons produced, so it mainly controls how much radiation reaches the receptor and how much dose the patient receives.

Related: kVp, Quantum mottle, Exposure indicator
kVp

Kilovoltage peak, the maximum voltage applied across the x-ray tube. It sets photon energy and beam penetration, so raising kVp increases penetration and scatter while lowering subject contrast.

Related: mAs, Filtration
Focal spot

The small area on the anode where x-rays are produced. A smaller focal spot sharpens recorded detail but limits the tube current that can safely be used.

Related: Anode heel effect, Magnification
Anode heel effect

X-ray intensity is lower on the anode side of the beam because photons are absorbed within the anode. The thicker part of the patient is therefore placed toward the cathode side of the tube.

Related: Focal spot
Filtration

Aluminum placed in the beam path that absorbs low-energy photons before they reach the patient. It lowers skin dose and raises average beam energy, a change described as beam hardening.

Related: kVp, Collimation
Grid

A plate of lead strips separated by spacer material, placed between the patient and the image receptor to absorb scattered radiation. It improves contrast but requires an increase in mAs.

Related: Collimation, kVp
Automatic exposure control

Ionization chambers that measure radiation reaching the receptor and end the exposure once a preset amount is received. Correct chamber selection and accurate centering are needed or the exposure will be wrong.

Related: mAs, Exposure indicator
Detector quantum efficiency

The percentage of x-ray photons striking a detector that actually contribute to the image signal. A higher value means the system needs less radiation to produce a diagnostic image.

Related: Quantum mottle, mAs
Source-to-image receptor distance

The distance from the focal spot to the image receptor. It affects magnification and receptor exposure, with beam intensity changing according to the inverse square law.

Related: Object-to-image receptor distance, Magnification, Inverse square law
Object-to-image receptor distance

The gap between the part being imaged and the image receptor. A larger gap increases magnification and geometric blur, so it is kept as small as practical.

Related: Source-to-image receptor distance, Magnification
Spatial resolution

The ability of an imaging system to show two small objects that lie close together as separate. It is often measured in line pairs per millimeter and perceived as sharpness of detail.

Related: Focal spot, Object-to-image receptor distance, Magnification
Contrast resolution

The ability to distinguish tissues that differ only slightly in x-ray attenuation. Digital systems offer wide contrast resolution, which allows windowing to reveal subtle differences.

Related: Grid, kVp
Quantum mottle

Graininess or speckle caused by too few x-ray photons reaching the receptor. It is reduced by increasing mAs and is a sign that the exposure was inadequate.

Related: mAs, Detector quantum efficiency
Exposure indicator

A number reported by a digital system that reflects how much radiation reached the receptor. Values outside the acceptable range mean the image is over- or underexposed and may need repeating.

Related: mAs, Automatic exposure control
Histogram

A graph showing how many pixels carry each brightness value. In computed radiography, processing uses the histogram to set the display scale applied to the image.

Related: Exposure indicator, Window width and level
Artifact

Any mark or structure on an image that does not represent the patient's anatomy, such as a plate scratch, clothing snap, or grid error. Artifacts can hide disease or be mistaken for it.

Related: Exposure indicator, Grid
Window width and level

Display controls on a digital image. Window width adjusts contrast and window level adjusts brightness; changing them alters how the image looks without changing the raw data.

Related: Contrast resolution, Histogram
Magnification

The increase in apparent size of a structure on an image compared with its true size. It grows when object-to-image receptor distance increases or source-to-image receptor distance decreases, and it always reduces recorded detail.

Related: Source-to-image receptor distance, Object-to-image receptor distance, Spatial resolution
Central ray

The portion of the x-ray beam traveling along the middle of the collimated field and leaving the tube housing at its center. Positioning instructions specify where this ray should be aimed.

Related: Anatomical position, Oblique projection
Anatomical position

The standard reference posture: body upright, face forward, arms at the sides with palms forward, and legs together. Position terms such as supine and oblique are described relative to it.

Related: Supine, Oblique projection
Supine

Lying face up on the back. It is used for many abdomen, chest, and skull routines, and it changes how abdominal organs and gas sit compared with an upright view.

Related: Trendelenburg position, Anatomical position
Trendelenburg position

Lying supine with the head lower than the feet. It is used to move contrast material or air toward the upper body and is also used in some emergency situations.

Related: Supine, Positive contrast media
Positive contrast media

A substance such as barium sulfate or an iodinated solution that attenuates x-rays more than soft tissue does, so it appears white. It is used to outline hollow structures.

Related: Trendelenburg position, Supine
Oblique projection

A view taken with the body or body part rotated rather than straight front-to-back or side-to-side. It is described by which surface or angle faces the image receptor.

Related: Anatomical position, Central ray
ALARA

As Low As Reasonably Achievable: the principle of keeping radiation dose to patients and workers as low as practical while still obtaining the information needed for diagnosis.

Related: Collimation, Gonadal shielding, Effective dose
Effective dose

A dose value in sieverts reflecting the overall cancer and genetic risk from a partial or whole-body exposure. Each tissue is weighted according to its sensitivity to radiation.

Related: ALARA, Occupational dose limit
Inverse square law

X-ray intensity decreases with the square of the distance from the source. Doubling the distance from the tube cuts the intensity to one quarter of its original value.

Related: Source-to-image receptor distance, ALARA
Collimation

Limiting the x-ray field to the area of interest using shutters. Smaller fields reduce patient dose, improve contrast by reducing scatter, and are required by regulation.

Related: ALARA, Grid
Gonadal shielding

A lead or lead-equivalent shield placed over the reproductive organs during an examination. It is used when the shield will not cover the area of clinical interest or interfere with the procedure.

Related: ALARA, Collimation
Primary barrier

A protective barrier designed to be struck by the useful x-ray beam, such as the wall behind the image receptor in a radiographic room. It must be thicker than a secondary barrier.

Related: Occupational dose limit, ALARA
Occupational dose limit

The annual limit for radiation workers, 50 mSv (5 rem) to the whole body in a year, with lower limits for the lens of the eye and extremities. It applies in addition to natural background exposure.

Related: Effective dose, Primary barrier

ARRT Radiography study plan

8 weeks · About 7 hours per week

Week 1

Image Production - Equipment and Image Acquisition

  • Trace current flow through the x-ray circuit from line voltage through the autotransformer, step-up transformer, rectifier bank, and tube, labeling each component's function

  • Calculate mAs from mA and exposure time, and predict how changes in mA, time, and kVp alter receptor exposure

  • Explain the purpose of the rotating anode, focal spot selection, and the anode heel effect, and predict which end of the image receives less exposure

  • Differentiate single-phase, three-phase, and high-frequency generators by waveform shape, ripple percentage, and output efficiency

Your checkpoint

Hand-drawn, fully labeled x-ray circuit diagram plus a score of 80% or higher on a 25-question Domain 2 quiz

Week 2

Image Production - Equipment and Image Acquisition & Image Production - Image Evaluation

  • Apply the prime exposure factors (kVp, mAs, SID, OID) to predict effects on brightness, contrast, spatial resolution, and distortion

  • Calculate new exposure values using the 15% rule and the inverse square law in written scenarios

  • Describe automatic exposure control operation, backup timer function, photocell selection, and the causes of overexposure and underexposure

  • Evaluate grid ratio, grid frequency, and grid errors (off-level, off-center, upside-down, off-focus) in terms of contrast and receptor exposure

Your checkpoint

Completed exposure-factor reference table (each factor change mapped to its image effect) plus a score of 80% or higher on a 30-question mixed Domain 2/3 quiz

Week 3

Image Production - Image Evaluation & Procedures

  • Identify the cause and correction for at least 12 common artifacts, including motion, double exposure, grid cutoff, and processing/plate errors

  • Evaluate text-described images against established positioning criteria: demonstration of required anatomy, collimation margins, marker placement, and patient identification

  • Describe standard projections and centering points for the chest, abdomen, and upper and lower extremities

  • Justify repeat or rejection decisions using evaluation criteria rather than guesswork

Your checkpoint

Artifact cause-to-correction table covering 12 artifacts plus a score of 80% or higher on a 25-question image-evaluation quiz

Week 4

Procedures

  • Describe routine and special projections for the spine, pelvis, skull, and contrast studies, including patient preparation and contraindications

  • Select appropriate immobilization, exposure factors, and shielding for trauma, pediatric, and geriatric patients

  • Explain how pathology and patient condition modify standard positioning routines

  • Sequence procedural steps for common fluoroscopic and contrast examinations

Your checkpoint

Positioning summary cards for 20 high-frequency examinations plus a score of 78% or higher on a 60-question mixed Domain 2/3/4 exam

Week 5

Patient Care and Education & Radiation Protection

  • Explain patient identification, informed consent, confidentiality, and documentation responsibilities in radiographic practice

  • Describe safe transfer, immobilization, and monitoring of patients with IV lines, catheters, oxygen, and other support devices

  • Convert between dose units (Gy, Sv, mGy, mrem) and state occupational and public dose limits

  • Apply time-distance-shielding and the inverse square law to calculate relative dose in given scenarios

Your checkpoint

One-page dose-limit and unit-conversion reference card plus a score of 80% or higher on a 30-question Domain 1/5 quiz

Week 6

Radiation Protection

  • Describe how collimation, filtration, gonadal shielding, and exposure factor selection reduce patient dose

  • Differentiate primary radiation from scatter and select proper protective apparel by lead equivalence

  • Explain personnel monitoring with OSL and TLD dosimeters, dose reporting, and pregnancy disclosure procedures

  • Identify the sources of repeat exposures and state strategies to reduce repeat rates

Your checkpoint

Written radiation-protection checklist for a general radiography department plus a score of 85% or higher on a 30-question Domain 5 quiz

Week 7

Patient Care and Education & Image Production - Image Evaluation & Procedures

  • Re-test the two lowest-scoring domains from previous quizzes and correct every missed item with a written rationale

  • Integrate patient care and radiation protection decisions into procedure-based scenarios

  • Recite positioning and evaluation criteria for the most frequently missed examinations without notes

  • Build a personal error log categorizing mistakes by domain and content type

Your checkpoint

Completed error log with a written rationale for every missed item and a score of 80% or higher on a 50-question cumulative re-test

Week 8

Image Production - Equipment and Image Acquisition & Image Production - Image Evaluation & Procedures & Radiation Protection & Patient Care and Education

  • Complete two timed, full-length practice exams under test-day conditions

  • Review each missed item to its underlying concept rather than memorizing the answer

  • Verify recall of exposure-factor math, dose limits, and positioning landmarks using flashcards

  • Finalize a test-day plan covering timing strategy, flagging, and guessing rules

Your checkpoint

Two completed full-length practice exams with a final score of 80% or higher on the second attempt and a finalized one-page test-day strategy sheet

Milestones

Week 2: Score 80% or higher on the first mixed Domain 2/3 quiz and explain the 15% rule and inverse square law aloud without notes

Week 4: Score 78% or higher on the 60-question mixed exam and hold 20 completed positioning cards

Week 6: Score 85% or higher on the Domain 5 quiz and state all occupational and public dose limits from memory

Week 8: Score 80% or higher on a second full-length timed practice exam with all missed items logged and rationalized

ARRT Radiography exam day

Your checklist

Appointment confirmation and testing location details

Print or save the confirmation showing date, time, and full street address of the test center. Confirm the delivery vendor and check-in procedure with ARRT/the vendor, since scheduling and center policies can change. (Needs review: confirm current vendor and appointment details with the provider.)

Primary photo ID that is unexpired and signed

A government-issued photo ID with your signature, with your name matching your ARRT record exactly. Check the expiration date now, not on exam morning.

Second form of identification

Bring a backup ID (for example a second government ID or a signed card) in case two forms are required. (Needs review: confirm the exact number and acceptable types of ID with ARRT/the vendor before exam day.)

Your ARRT identification number and login information

Know your candidate/ARRT ID number; the staff may ask for it at check-in. Do not rely on your phone to look it up, since phones are not permitted in the testing room.

Directions, parking, and a transit backup plan

Do a dry run or map the route, identify parking or the nearest transit stop, and add a buffer for traffic. Know the building entrance and floor.

A plan to arrive about 30 minutes early

Early arrival allows time for check-in, ID verification, and locker use. Confirm the center's recommended arrival window with the provider. (Needs review: confirm the exact arrival/check-in cutoff, since late arrivals may be refused.)

Leave prohibited items behind or plan for locker storage

Phones, smartwatches, fitness trackers, notes, study cards, and personal calculators are not allowed in the testing room. Plan where they will go before you walk in.

No personal scratch paper or calculator

Writing surfaces and any permitted calculator functions are provided at the workstation. Confirm what is supplied at your center. (Needs review: confirm permitted aids with the provider.)

Comfort items for before and after the exam only

Layered clothing in case the room is cold, water and a snack for after the exam, and any needed medication taken beforehand. Food and drink generally stay outside the testing room.

Approved testing accommodations, if you need them

Accommodations must be requested and approved in advance through ARRT before scheduling. Confirm your approval status well ahead of exam day. (Needs review: confirm accommodation procedures and deadlines with ARRT.)

Eyeglasses or contacts you actually use

If you wear corrective lenses for screen reading, bring them. Do not plan to squint at a monitor for hours.

A short, low-stress review sheet of weak topics

One or two pages maximum of high-yield concepts in your weakest content areas, reviewed before you leave home. Do not plan to study inside the center.

Plan the day

Final 72 hours

Re-read your appointment confirmation and the ARRT candidate handbook rules. Verify your ID expiration dates and that your name matches your registration. Confirm the center address, parking, and arrival time. Do only light, targeted review of two or three weak content areas, using the same question formats you will see. Stop heavy new-material study. Protect your sleep schedule starting now.

Final 72 hours - logistics

Pack your ID(s), confirmation, and comfort items in one bag. Charge nothing you plan to bring into the room, because you cannot bring it in. Arrange transportation and, if needed, childcare or work coverage so exam morning is uncomplicated. If you have a scheduling or name-change issue, contact ARRT/the vendor immediately rather than on exam day.

Final 24 hours

No cramming and no new topics. Do one short review pass of your weak-topic sheet, then stop. Eat a normal meal, avoid excess caffeine and alcohol, set two alarms, and go to bed at your usual time. Recheck the address and your departure time.

Exam morning

Eat a normal breakfast, hydrate, take routine medications, and dress in layers. Leave earlier than the map says. Arrive about 30 minutes early for check-in and ID verification, store prohibited items in a locker or vehicle, and use the restroom before you are seated.

During the test - opening minutes

Read the on-screen instructions and note the time limit and question count. Take a breath and settle. Answer the early questions at a steady pace rather than racing.

During the test - pacing

Budget roughly one minute per question, adjusting to the actual item count and time limit after checking the on-screen timer. Confirm current exam length and time limit with ARRT. (Needs review: exact item count and time limit.) Use the flag/skip feature: answer what you know, flag long or uncertain items, and return to them.

During the test - middle and end

Take any permitted break only if you need it, and know whether the clock runs during it. Answer every question - there is no penalty for guessing on ARRT exams, so never leave blanks. In the last 10–15 minutes, stop starting new long items and review flagged questions.

After the test

You typically receive a preliminary result at the center; official results and score reporting come from ARRT. Confirm how and when results are released. (Needs review: confirm the current results-release process and timing with ARRT.) Do not discuss specific exam content with anyone afterward.

Rules to check

  • ID rules: bring valid, unexpired identification with your name matching your registration exactly. If your legal name has changed, update your record with ARRT before exam day - do not expect the center to resolve it. Confirm the required number and types of ID with ARRT/the vendor. (Needs review.)

  • Confidentiality: ARRT exam content is confidential. Do not record, copy, photograph, discuss, or share exam questions or answers with anyone, including other candidates or study groups. Doing so can void your score and trigger ethics action.

  • Permitted aids only: use only the writing surface, calculator, and other aids provided at the workstation. Personal notes, reference material, phones, smartwatches, and other devices must stay outside the testing room; a vibrating or visible device can end your session.

  • Breaks: follow the proctor's instructions on breaks and on whether the exam clock keeps running while you are away. Confirm the break policy for your exam with the provider rather than assuming. (Needs review.)

  • Report problems immediately: if the computer malfunctions, the screen freezes, the room is distracting, or another candidate disturbs you, raise your hand and tell the proctor at the time rather than after the exam.

  • Scoring and guessing: ARRT reports results on a scaled score basis with a passing standard set by ARRT, and there is no penalty for incorrect answers, so answer every item. Confirm the current passing standard and score-reporting method with ARRT. (Needs review: exact pass point and scale.)

  • Follow the proctor and ARRT Rules of Ethics: comply with all staff instructions, remain in the testing area until dismissed, and do not communicate with other candidates during the exam. Misconduct can result in score cancellation and eligibility consequences.

ARRT Radiography FAQ

How many ARRT Radiography practice questions are available?

The practice set has 200 ARRT Radiography questions. Each one includes the choices, the correct answer, and an explanation, and the set is free to read with no signup.

How many ARRT Radiography flashcards are available?

The flashcard set has 32 ARRT Radiography cards. Each card shows the term and its definition.

Which topics does the ARRT Radiography study material cover?

The ARRT Radiography study material has 5 sections, including Patient Care and Education, Image Production: Equipment and Image Acquisition, and Image Production: Image Evaluation.