CompTIA Network+ Practice Test

CompTIA Network+ (N10-009)

CompTIA Network+ overview

  • 200 practice questions
  • 32 flashcards
  • 5 study guide topics
  • 40 key terms

What you'll study

  • Networking concepts23%
  • Network implementation20%
  • Network operations19%
  • Network security14%
  • Network troubleshooting24%

CompTIA Network+ is a vendor-neutral certification that validates foundational networking knowledge and hands-on skill. The current release, exam code N10-009 (version V9), launched on June 20, 2024, and assesses network connectivity, documentation, service configuration, data centers, cloud and virtual networking, monitoring, troubleshooting, and security hardening. The exam draws from five weighted domains: networking concepts (23%), network implementation (20%), network operations (19%), network security (14%), and network troubleshooting (24%). Candidates face a maximum of 90 questions, a mix of multiple-choice and performance-based items, in 90 minutes, and must score 720 on a 100-900 scale to pass. CompTIA recommends CompTIA A+ certification plus 9 to 12 months of hands-on experience in a junior network administrator or network support technician role, and positions the credential toward technical support, network operations, and system administration jobs. Preparation usually combines the published exam objectives, hands-on lab work with routers, switches, wireless and monitoring tools, and timed practice exams; CompTIA estimates 30-60 hours for its most comprehensive self-study product. This page is independent study material and is not affiliated with, endorsed by, or sponsored by CompTIA.

Common mistakes

Memorizes port numbers only in the number→protocol direction ("3389 = RDP") and then freezes when a scenario describes the service first ("a technician must reach a Windows host's graphical console remotely - which port must be allowed?"), or swaps near-identical pairs such as 389/636, 143/993, 80/8080, and 161/162.

Ports are usually drilled from a single flat list in one direction, so recognition works but recall does not, and paired secure/insecure services blur together because they were never studied as pairs.

What to do instead

Rebuild the deck bidirectionally (service→port and port→service) and study paired entries side by side (389 LDAP / 636 LDAPS, 143 IMAP / 993 IMAPS, 161 SNMP query / 162 SNMP trap, 20-21 FTP control+data / 22 SFTP). Add one scenario sentence to each card describing a real use case so the port is attached to a situation, not just a number.

Answers "which OSI layer" questions from the name of a device or protocol rather than from the fault symptom - for example choosing Layer 3 for a duplex mismatch or VLAN misconfiguration, Layer 7 for a TLS certificate error, or Layer 2 for a routing loop.

Candidates memorize layer names and one example device per layer, but exam items usually present a symptom (cable unplugged, bad transceiver, wrong default gateway, application timeout) and expect the layer where that symptom originates.

What to do instead

Build a two-column table of symptom→layer and practice classifying 20–30 symptoms rather than devices: physical damage/no link = 1, MAC/VLAN/duplex = 2, IP/addressing/routing = 3, port/firewall/segment = 4, session teardown = 5, encoding/encryption/format = 6, application behavior = 7. Note that TLS encryption is commonly attributed to Layer 6 while TLS-based protocols like HTTPS are Layer 7.

Computes subnet size or range incorrectly - counting the network and broadcast addresses as usable hosts (calling /26 "64 hosts" instead of 62), or failing to determine whether two given IP/mask pairs sit on the same subnet when the item asks whether traffic is routed or switched.

The 2^h formula is memorized without the "minus 2" for traditional IPv4 subnets, and same-subnet questions are answered by eyeballing the first three octets instead of ANDing against the mask.

What to do instead

Drill until the mask table is automatic ( /25=128, /26=64, /27=32, /28=16, /29=8, /30=4 blocks; usable = block minus 2), then practice the AND operation explicitly on pairs like 192.168.1.70/26 vs 192.168.1.130/26. For /31 and /32, remember the usable-host rule differs.

Confuses virtualization, cloud, and software-defined networking models - labeling a provider-managed virtual machine as PaaS, calling SaaS "infrastructure," or stating that SDN moves the forwarding function into the control plane (the reverse is true: forwarding stays in the data plane while the control plane is centralized).

The service models are learned as three words rather than as a responsibility split, and SDN is learned as a slogan rather than as a plane diagram, so plausible-sounding reversals look correct under time pressure.

What to do instead

Anchor each model to who manages what: IaaS = you manage the OS and up; PaaS = you manage only the app/code; SaaS = you manage only your data and access. Draw the SDN split once by hand - control plane decides, data plane forwards - and note that NFV virtualizes network functions while SDN centralizes control; they are complementary, not the same thing.

Picks the wrong wireless tradeoff - choosing 5 GHz as the band with the longest range and best wall penetration, assuming 2.4 GHz is faster because it is "more crowded," or matching a standard to the wrong band/throughput (e.g., attributing 802.11ac features to 2.4 GHz).

Band characteristics are memorized as adjectives rather than as a physical tradeoff, and standards are learned as a list of speeds without attaching each to its frequency, channel width, and MIMO characteristics.

What to do instead

Learn one sentence per band: lower frequency = longer range and better penetration but fewer non-overlapping channels (2.4 GHz: 1/6/11); higher frequency = more bandwidth and less interference but shorter range (5 GHz, 6 GHz). Then build a standards grid with columns for band, max channel width, and typical marketing speed, and fill it from memory weekly.

Selects cable media by category name alone and ignores the distance constraint in the question - recommending Cat 6 for 10 Gbps at 100 m, Cat 5e for 2.5/5 Gbps at full length, or single-mode fiber for a short intra-building run where multimode is the expected choice.

Candidates memorize "Cat 6a = 10G" as a slogan and drop the length qualifier, and fiber types are learned as connector shapes rather than as distance/optics tradeoffs.

What to do instead

Attach a distance to every copper standard you memorize (Cat 5e = 1 Gbps/100 m, Cat 6 = 10 Gbps to ~55 m, Cat 6a = 10 Gbps/100 m) and every fiber type (multimode for short-to-moderate runs inside a campus, single-mode for long-haul). Before answering, underline the distance in the stem and eliminate any option that cannot meet it.

Swaps RTO and RPO - stating that RPO is the time to restore service after an outage, or that RTO is how much data loss is tolerable - and then picking a backup-frequency answer for a question that actually asked about acceptable downtime.

Both are expressed in time units and both appear in the same disaster-recovery paragraph, so they are stored as one undifferentiated "recovery time" concept.

What to do instead

Fix the mnemonic to the object each one protects: RTO protects service availability (how long until we are back up), RPO protects data (how far back the last good copy may be, which sets backup frequency). When a stem says "the business can tolerate four hours of downtime," that is RTO; "no more than 15 minutes of transactions may be lost" is RPO.

Mixes up 802.1X and AAA roles - naming the switch or access point as the authentication server, or treating authentication, authorization, and accounting as interchangeable when a scenario distinguishes them.

802.1X is learned as "port security with a login," so the three-party exchange collapses into two parties, and AAA is learned as a single acronym rather than as three sequential functions.

What to do instead

Draw the 802.1X triangle once and label it precisely: supplicant (client) → authenticator (switch/AP, which only relays) → authentication server (RADIUS/TACACS+). Then write one line per A: authentication = who you are, authorization = what you may do, accounting = what you did and when. Check any answer that names the switch as the decision-maker.

Conflates attack types that share a symptom - answering "evil twin" for a rogue DHCP server, "phishing" for a targeted executive email (whaling/spear phishing), "DoS" for a botnet-driven flood (DDoS), or "on-path attack" for ARP spoofing that the question is testing as ARP poisoning.

These attacks are studied as a vocabulary list of names rather than as distinct mechanisms, so any answer containing a familiar security word looks right.

What to do instead

For each attack, memorize the mechanism in one clause (evil twin = fake AP broadcasting a real SSID; rogue DHCP = unauthorized server handing out leases/gateway; on-path = attacker relays traffic between two hosts; DDoS = many distributed sources). Group the phishing family by target: broad = phishing, specific individual = spear phishing, executive = whaling, voice channel = vishing, SMS = smishing.

Skips or reorders the CompTIA troubleshooting methodology - selecting "document findings" or "implement the solution" as an early step, or jumping straight to a fix without establishing and testing a theory - and answers the "next step" item with the technically effective action rather than the methodologically correct one.

Experienced candidates troubleshoot intuitively and answer with what they would actually do first on the job, which is often out of order relative to the seven-step model the exam is measuring.

What to do instead

Memorize the sequence verbatim: identify the problem (gather information, question the obvious, duplicate the problem if possible) → establish a theory of probable cause (question the obvious) → test the theory to determine cause → establish a plan of action and implement the solution → verify full system functionality and implement preventive measures → document findings, actions, and outcomes. For any "next step" item, locate where the scenario currently sits in the sequence before reading the options.

Exam requirements can change. Confirm current details with the exam provider.

CompTIA Network+ practice

200 questions. Each one lists the choices, the correct answer, and an explanation. With JavaScript, this list opens one question at a time. The checker at the top of this page saves progress in this browser when it is available.

  1. Question 1Networking concepts

    A router makes forwarding decisions based on IP addresses. At which OSI model layer does it primarily operate?

    1. Layer 3 Correct answer.
    2. Layer 1
    3. Layer 2
    4. Layer 4

    Explanation

    Routers operate at the network layer (Layer 3), where logical addressing and path selection occur. They examine destination IP addresses to forward packets between networks.

  2. Question 2Networking concepts

    Which TCP port is used by default for HTTPS?

    1. 443 Correct answer.
    2. 80
    3. 20
    4. 25

    Explanation

    HTTPS uses TCP 443 by default to carry HTTP over TLS. Other well-known ports include 80 for HTTP, 20/21 for FTP, and 25 for SMTP.

  3. Question 3Networking concepts

    Which device forwards frames based on destination MAC addresses?

    1. Firewall
    2. Router
    3. Hub
    4. Switch Correct answer.

    Explanation

    A switch learns MAC addresses and forwards frames only to the port where the destination MAC resides. Routers use IP addresses, hubs repeat to all ports, and firewalls filter by policy.

  4. Question 4Networking concepts

    Which address block is reserved for private use by RFC 1918?

    1. 11.0.0.0/8
    2. 172.15.0.0/16
    3. 172.16.0.0/12 Correct answer.
    4. 12.0.0.0/8

    Explanation

    RFC 1918 defines 10.0.0.0/8, 172.16.0.0/12, and 192.168.0.0/16 as private ranges. The 172.16.0.0/12 block spans 172.16.0.0 through 172.31.255.255.

  5. Question 5Networking concepts

    What is the primary function of DNS?

    1. Resolves names to IP addresses Correct answer.
    2. Routes packets between subnets
    3. Encrypts web traffic
    4. Assigns addresses automatically

    Explanation

    DNS is a hierarchical naming system that maps host names to IP addresses so clients can locate services. Address assignment is handled by DHCP, encryption by TLS, and routing by routers.

  6. Question 6Networking concepts

    Which value tells a host where to send traffic destined for a different network?

    1. The interface MAC address
    2. The default gateway Correct answer.
    3. The local subnet mask
    4. The preferred DNS server

    Explanation

    The default gateway is the router address a host uses when the destination lies outside its own subnet. The subnet mask distinguishes local from remote destinations, DNS resolves names, and MAC addresses are used only on the local link.

  7. Question 7Networking concepts

    What is the maximum throughput and distance supported by Cat 6a twisted-pair cable?

    1. 10 Gbps at 100 m Correct answer.
    2. 10 Gbps at 55 m
    3. 1 Gbps at 100 m
    4. 100 Mbps at 100 m

    Explanation

    Cat 6a is rated for 10 Gbps over 100 meters and has improved shielding to reduce crosstalk. Cat 6 reaches 10 Gbps only to 55 m, and Cat 5e supports 1 Gbps to 100 m.

  8. Question 8Networking concepts

    What does DHCP provide to network clients?

    1. Provides domain name resolution for clients
    2. Resolves MAC to IP addresses
    3. Filters traffic by TCP port
    4. Assigns IP settings automatically Correct answer.

    Explanation

    DHCP automatically delivers an IP address, subnet mask, default gateway, and DNS settings to clients through a lease. Name resolution is DNS, MAC-to-IP mapping is ARP, and port filtering is a firewall function.

  9. Question 9Networking concepts

    How many usable host addresses does a /27 IPv4 subnet provide?

    1. 14
    2. 30 Correct answer.
    3. 62
    4. 32

    Explanation

    A /27 leaves five host bits, producing 2^5 = 32 total addresses. Subtracting the network and broadcast addresses leaves 30 usable host addresses.

  10. Question 10Networking concepts

    What is the primary effect of placing switch ports into different VLANs?

    1. They increase the link speed
    2. They assign IP addresses automatically
    3. They isolate broadcast domains Correct answer.
    4. They encrypt traffic between ports

    Explanation

    Each VLAN is a separate Layer 2 broadcast domain, so broadcast traffic stays within its VLAN. Link speed is a physical property, encryption requires protocols such as IPsec or MACsec, and IP assignment is done by DHCP.

  11. Question 11Networking concepts

    A home router maps many internal private addresses to a single public address. Which technology performs this?

    1. VLAN
    2. PAT Correct answer.
    3. Static NAT
    4. ARP

    Explanation

    Port Address Translation, also called NAT overload, uses source port numbers to distinguish multiple internal sessions sharing one public IP address. Static NAT is one-to-one, ARP resolves MAC addresses, and VLANs segment Layer 2 traffic.

  12. Question 12Networking concepts

    How does traceroute identify each router along a path?

    1. DNS reverse lookups for each hop
    2. ARP cache inspection
    3. TTL expiration with ICMP Correct answer.
    4. TCP window scaling

    Explanation

    Traceroute sends packets with incrementally increasing TTL values, and each router that decrements the TTL to zero returns an ICMP Time Exceeded message identifying itself. DNS lookups may label hops but do not discover them.

  13. Question 13Networking concepts

    What is the role of ARP on an IPv4 network?

    1. Assigns IP addresses dynamically to hosts
    2. Resolves names to IP addresses
    3. Maps IPv4 addresses to MAC addresses Correct answer.
    4. Encrypts data between hosts

    Explanation

    ARP broadcasts a request for the MAC address that owns a given IPv4 address, and the reply is cached so frames can be delivered on the local link. DHCP assigns addresses, DNS resolves names, and encryption is unrelated.

  14. Question 14Networking concepts

    Compared with 2.4 GHz, which characteristic applies to the 5 GHz Wi-Fi band?

    1. Support for legacy 802.11b only
    2. Shorter range, more channels Correct answer.
    3. Higher microwave interference
    4. Longer range, better wall penetration

    Explanation

    Higher frequencies attenuate faster, so 5 GHz offers shorter range and poorer wall penetration but many more non-overlapping channels. The 2.4 GHz band is more susceptible to microwave and Bluetooth interference and is the only band used by 802.11b.

  15. Question 15Networking concepts

    Which protocol provides encrypted remote CLI access over TCP port 22?

    1. SNMP
    2. SSH Correct answer.
    3. RDP
    4. Telnet

    Explanation

    SSH uses TCP 22 and encrypts the session, replacing cleartext Telnet on TCP 23. SNMP uses UDP 161 and 162, while RDP uses TCP 3389.

  16. Question 16Networking concepts

    A packet exceeds the interface MTU and the DF bit is set. What happens?

    1. An ICMP error is returned Correct answer.
    2. It is converted to a broadcast
    3. It is dropped with no notification
    4. It is queued indefinitely

    Explanation

    With the DF bit set, the router cannot fragment the packet, so it drops it and returns an ICMP Destination Unreachable with Fragmentation Needed to the source. This message supports path MTU discovery.

  17. Question 17Networking concepts

    Which routing protocol is a link-state interior gateway protocol that uses the Dijkstra algorithm?

    1. BGP
    2. RIP
    3. EIGRP
    4. OSPF Correct answer.

    Explanation

    OSPF builds a topology database from link-state advertisements and runs the SPF (Dijkstra) algorithm to compute shortest paths. RIP is distance-vector, BGP is an exterior path-vector protocol, and EIGRP is an advanced distance-vector protocol.

  18. Question 18Networking concepts

    A switch port shows late collisions, CRC errors, and poor throughput. Which cause is most likely?

    1. Wrong subnet mask
    2. Incorrect DNS server
    3. Expired DHCP lease
    4. Duplex mismatch Correct answer.

    Explanation

    A duplex mismatch, where one side is full-duplex and the other half-duplex, produces collisions and CRC errors and severely reduces throughput. The other issues affect addressing or name resolution and do not cause frame errors.

  19. Question 19Networking concepts

    Which cloud service model delivers virtual machines and storage that the customer configures and manages?

    1. IaaS Correct answer.
    2. PaaS
    3. SaaS
    4. FaaS

    Explanation

    Infrastructure as a Service provides virtualized compute, storage, and networking, while the customer manages the operating system and applications. SaaS delivers finished applications, PaaS provides a managed runtime, and FaaS runs individual functions.

  20. Question 20Networking concepts

    A host has the address 169.254.10.5. What does this indicate?

    1. It received a manually assigned address
    2. It has a valid DHCP lease
    3. No DHCP server was reachable Correct answer.
    4. It is using a public address

    Explanation

    The 169.254.0.0/16 range is the link-local APIPA range that a host self-assigns when DHCP fails. Such an address permits only local communication and is not routable.

  21. Question 21Networking concepts

    What is the broadcast address of the subnet 172.16.4.0/22?

    1. 172.16.8.255
    2. 172.16.7.255 Correct answer.
    3. 172.16.4.255
    4. 172.16.5.255

    Explanation

    A /22 has a block size of 4 in the third octet, so the subnet spans 172.16.4.0 through 172.16.7.255. The broadcast address is the last address in that range, 172.16.7.255.

  22. Question 22Networking concepts

    How is the root bridge elected in Spanning Tree Protocol?

    1. By the highest port priority
    2. By the highest MAC address
    3. By the lowest IP address
    4. By the lowest bridge ID Correct answer.

    Explanation

    The bridge with the lowest bridge ID, which combines priority and MAC address, becomes the root bridge. Port priority influences which port forwards, and STP does not use IP addresses for election.

  23. Question 23Networking concepts

    Which statement describes BGP?

    1. It uses hop count as its primary metric
    2. It is an interior link-state protocol
    3. It is a distance-vector IGP
    4. It is an exterior path-vector protocol Correct answer.

    Explanation

    BGP is the exterior gateway protocol used between autonomous systems, and it selects paths using attributes rather than hop count. It is classified as a path-vector protocol.

  24. Question 24Networking concepts

    Which IPv6 prefix identifies link-local addresses?

    1. 2000::/3
    2. fe80::/10 Correct answer.
    3. fc00::/7
    4. ff00::/8

    Explanation

    IPv6 link-local addresses use the fe80::/10 prefix and are valid only on a single link. Global unicast uses 2000::/3, unique local uses fc00::/7, and multicast uses ff00::/8.

  25. Question 25Networking concepts

    In a software-defined network, what is the main function of the controller?

    1. It translates private addresses
    2. It centralizes control logic Correct answer.
    3. It forwards packets at line rate
    4. It supplies power to access points

    Explanation

    SDN separates the control plane from the data plane, and the controller computes and programs forwarding policy across the network. Switches perform the actual data-plane forwarding, while PoE and NAT are unrelated functions.

  26. Question 26Networking concepts

    A router forwards a packet toward a remote network by examining the destination IP address and choosing a path. Which OSI layer performs this function?

    1. Transport layer (Layer 4)
    2. Session layer (Layer 5)
    3. Network layer (Layer 3) Correct answer.
    4. Data link layer (Layer 2)

    Explanation

    Logical addressing and path selection between networks are handled at the network layer, where routers operate on IP addresses. Layer 2 deals with local frame delivery by MAC address, while layers 4 and 5 handle end-to-end transport and session management.

  27. Question 27Networking concepts

    Which address block is reserved for private use and is not routed across the public internet?

    1. 198.51.100.0/24
    2. 192.0.2.0/24
    3. 203.0.113.0/24
    4. 172.16.0.0/12 Correct answer.

    Explanation

    RFC 1918 defines three private ranges: 10.0.0.0/8, 172.16.0.0/12, and 192.168.0.0/16. Traffic using these addresses must be translated before it can reach the internet. The other blocks shown are documentation ranges, not private addressing.

  28. Question 28Networking concepts

    A client sends a name resolution query to a DNS server. Which transport port does the server listen on by default?

    1. TCP 389
    2. UDP 161
    3. UDP 53 Correct answer.
    4. TCP 123

    Explanation

    DNS listens on port 53 and uses UDP for standard queries and TCP for large responses and zone transfers. Port 123 belongs to NTP, 161 to SNMP, and 389 to LDAP.

  29. Question 29Networking concepts

    In a star topology, every host connects to a central switch. Which statement describes a key characteristic of this design?

    1. Traffic passes from host to host around a closed loop until it reaches the sender.
    2. Every host has a direct physical link to every other host on the segment.
    3. A central device failure isolates every connected host. Correct answer.
    4. All hosts share one coaxial backbone cable with terminators at both ends.

    Explanation

    In a star, each endpoint depends on the central device for connectivity, so a failure there disconnects the whole segment while individual cable faults affect only one host. Full-mesh designs link every host to every other host, and ring or bus designs use the other described layouts.

  30. Question 30Networking concepts

    Which of these protocols relies on UDP as its transport?

    1. HTTPS
    2. SSH
    3. FTP
    4. TFTP Correct answer.

    Explanation

    TFTP uses UDP port 69 because it favors low overhead over reliability and handles retransmission itself. SSH, HTTPS, and FTP all require the ordered, reliable byte stream that TCP provides.

  31. Question 31Networking concepts

    What is the purpose of NTP on a network?

    1. Maps MAC addresses to IP addresses on the local link
    2. Resolves host names into IP addresses
    3. Keeps device clocks synchronized to a common time source Correct answer.
    4. Assigns IP addresses to hosts on a local segment

    Explanation

    NTP exchanges timestamps over UDP port 123 so routers, servers, and clients agree on time, which keeps logs and certificates consistent. Address assignment belongs to DHCP, name resolution to DNS, and MAC-to-IP mapping to ARP.

  32. Question 32Networking concepts

    Which sequence is used to establish a TCP connection?

    1. SYN, SYN-ACK, ACK Correct answer.
    2. ACK, SYN, FIN
    3. SYN, FIN, ACK
    4. SYN, ACK, RST

    Explanation

    The three-way handshake begins with a SYN carrying the client's initial sequence number, is answered by a SYN-ACK from the server, and is completed by an ACK from the client. Data transfer begins only after this exchange completes.

  33. Question 33Networking concepts

    A trunk link between two switches carries traffic for several VLANs. Which standard inserts a VLAN identifier into the Ethernet frame?

    1. 802.1X
    2. 802.1Q Correct answer.
    3. 802.3ad
    4. 802.11

    Explanation

    802.1Q adds a four-byte tag containing a 12-bit VLAN ID so a single link can carry multiple VLANs. 802.1X handles port-based access control, 802.3ad covers link aggregation, and 802.11 covers wireless LANs.

  34. Question 34Networking concepts

    A network is addressed as 192.168.10.0/24. How many equal-sized /26 subnets can be created from it?

    1. 16
    2. 8
    3. 2
    4. 4 Correct answer.

    Explanation

    Borrowing two bits (from /24 to /26) yields 2^2 = 4 subnets, each with 64 addresses. Each step of two in the prefix length multiplies the subnet count by four.

  35. Question 35Networking concepts

    Which characteristic applies to single-mode fiber cabling?

    1. It is the least expensive option for links under 100 meters.
    2. It uses a core diameter of 50 or 62.5 micrometers.
    3. It carries one light path and supports links of many kilometers. Correct answer.
    4. It uses an LED light source and is limited to short building runs.

    Explanation

    Single-mode fiber has a small core that admits one propagation path, so laser signals travel long distances with little dispersion. Multimode fiber uses the larger 50 or 62.5 micrometer cores and LED or VCSEL sources for shorter runs within a building.

  36. Question 36Networking concepts

    A switch receives a frame whose destination MAC address is not present in its MAC address table. How does the switch handle it?

    1. It floods the frame out every other port in the VLAN. Correct answer.
    2. It holds the frame until the destination host sends a broadcast.
    3. It drops the frame and returns an ICMP unreachable error.
    4. It sends the frame back out the port on which it arrived.

    Explanation

    Unknown unicast frames are flooded within the ingress VLAN so the destination can respond and be learned; later frames are forwarded only to the learned port. The switch does not generate ICMP errors, and it never forwards a frame back out its ingress port.

  37. Question 37Networking concepts

    Which DNS record type identifies the mail servers that accept email for a domain?

    1. A
    2. PTR
    3. MX Correct answer.
    4. CNAME

    Explanation

    MX records list the hosts responsible for mail delivery for a domain, along with a preference value used to order them. A records map names to addresses, CNAMEs create aliases, and PTR records support reverse lookups.

  38. Question 38Networking concepts

    Which IEEE wireless standard operates only in the 5 GHz band?

    1. 802.11ac Correct answer.
    2. 802.11g
    3. 802.11n
    4. 802.11b

    Explanation

    802.11ac was defined solely for 5 GHz operation, while 802.11n can use either 2.4 GHz or 5 GHz. 802.11b and 802.11g operate only in 2.4 GHz.

  39. Question 39Networking concepts

    Which IEEE standard supplies roughly 30 watts of Power over Ethernet per port?

    1. 802.3af
    2. 802.3ad
    3. 802.3bz
    4. 802.3at Correct answer.

    Explanation

    802.3at, commonly called PoE+, delivers about 30 watts at the source port, roughly double the 15.4 watts of 802.3af. 802.3ad defines link aggregation and 802.3bz covers 2.5G/5G Ethernet.

  40. Question 40Networking concepts

    Which IPv6 prefix is reserved for unique local addressing?

    1. ff00::/8
    2. fc00::/7 Correct answer.
    3. 2000::/3
    4. 2001:db8::/32

    Explanation

    Unique local addresses use fc00::/7 and serve the same role as RFC 1918 private IPv4 space, remaining unroutable on the public internet. 2000::/3 is global unicast, ff00::/8 is multicast, and 2001:db8::/32 is reserved for documentation.

  41. Question 41Networking concepts

    A cloud service automatically adds virtual machines when demand rises and removes them as demand falls. Which characteristic does this describe?

    1. Multitenancy
    2. Elasticity Correct answer.
    3. High availability
    4. Measured service

    Explanation

    Elasticity is the ability to scale resources out and back in automatically as workload changes. High availability keeps services reachable during failures, multitenancy shares infrastructure among customers, and measured service refers to metered billing.

  42. Question 42Networking concepts

    Two switches are joined by four links bundled into one logical link with LACP. What is the primary benefit of this configuration?

    1. A single broadcast domain spanning both switches
    2. Automatic assignment of IP addresses on the link
    3. Increased aggregate bandwidth and link redundancy Correct answer.
    4. Encryption of the traffic between the two switches

    Explanation

    Link aggregation combines parallel links into one logical interface, so throughput scales with the number of member links and traffic continues if a member fails. It does not encrypt traffic or provide addressing, and broadcast domains are determined by VLAN configuration.

  43. Question 43Networking concepts

    A router has an OSPF route (administrative distance 110), a static route (administrative distance 1), and an eBGP route (administrative distance 20) toward the same destination prefix. Which route is installed in the routing table?

    1. The static route Correct answer.
    2. The eBGP route
    3. The OSPF route
    4. All three routes, shared equally

    Explanation

    When multiple sources offer the same prefix, the router prefers the lowest administrative distance, which ranks source trustworthiness. A static route with an AD of 1 beats eBGP at 20 and OSPF at 110, so only it is installed.

  44. Question 44Networking concepts

    Which summary route covers the four subnets 10.1.4.0/24 through 10.1.7.0/24?

    1. 10.1.0.0/21
    2. 10.1.4.0/23
    3. 10.1.6.0/23
    4. 10.1.4.0/22 Correct answer.

    Explanation

    The four /24 networks occupy the 10.1.4.0 to 10.1.7.255 range, which is a single block of 1024 addresses aligned on a /22 boundary. A /22 contains exactly four /24s, so 10.1.4.0/22 summarizes all of them.

  45. Question 45Networking concepts

    A receiving host advertises a TCP window size of zero. What does this signal to the sender?

    1. The next segment must be resent with a smaller MSS.
    2. The sender may continue at full rate until an ACK arrives.
    3. The receiver buffer is full and the sender must pause. Correct answer.
    4. The connection should be reset and re-established.

    Explanation

    The window field tells the sender how much buffer space remains, so a zero window means no data can be accepted and transmission stops until a window update arrives. It is part of flow control, distinct from congestion control and from connection teardown.

  46. Question 46Networking concepts

    A subnet must support at least 500 usable host addresses. Which prefix length satisfies the requirement with the least wasted address space?

    1. /23 Correct answer.
    2. /24
    3. /22
    4. /21

    Explanation

    Usable hosts equal 2^h - 2, so a /23 provides 512 addresses minus 2, or 510 usable hosts, which meets the requirement with the smallest block. A /24 provides only 254 usable addresses and would fall short.

  47. Question 47Network implementation

    Which IEEE standard defines 10 Gbps Ethernet over twisted-pair copper cabling?

    1. 10GBASE-ER
    2. 10GBASE-T Correct answer.
    3. 10GBASE-SR
    4. 10GBASE-LR

    Explanation

    10GBASE-T carries 10 Gbps over four pairs of twisted-pair copper, typically Cat 6 or Cat 6a, for distances up to 100 meters. The other designations in this family use optical fiber rather than copper.

  48. Question 48Network implementation

    Which frequency band is used by IEEE 802.11ac?

    1. 6 GHz only
    2. Both 2.4 GHz and 5 GHz
    3. 5 GHz only Correct answer.
    4. 2.4 GHz only

    Explanation

    802.11ac (Wi-Fi 5) is specified only for the 5 GHz band, which is why it offers wider channels and higher throughput than 2.4 GHz designs. Operation in 2.4 GHz comes from 802.11b/g/n, and 6 GHz support was added with 802.11ax (Wi-Fi 6E).

  49. Question 49Network implementation

    Which UDP ports does a DHCP server use to receive client requests and send replies?

    1. 161 and 162
    2. 68 and 69
    3. 53 and 67
    4. 67 and 68 Correct answer.

    Explanation

    DHCP servers listen on UDP port 67 and DHCP clients listen on UDP port 68, with relay agents forwarding messages between the two. Port 53 is used by DNS, and ports 161/162 by SNMP.

  50. Question 50Network implementation

    Which PoE standard provides up to 15.4 watts of power at the PSE port?

    1. 802.3bt Type 4
    2. 802.3at
    3. 802.3af Correct answer.
    4. 802.3bt Type 3

    Explanation

    802.3af, also called PoE Type 1, delivers up to 15.4 W at the power sourcing equipment and about 12.95 W at the powered device. 802.3at (Type 2) raises this to 30 W, while 802.3bt types provide 60 W or more.

  51. Question 51Network implementation

    What is the primary purpose of Spanning Tree Protocol on a switched network?

    1. To authenticate devices before they join a VLAN
    2. To aggregate multiple links into one logical link
    3. To route packets between VLANs
    4. To prevent Layer 2 switching loops Correct answer.

    Explanation

    STP elects a root bridge and places redundant ports into a blocking or discarding state, producing a loop-free logical topology so broadcast frames cannot circulate forever. Inter-VLAN routing and link aggregation are separate functions.

  52. Question 52Network implementation

    On an 802.1Q trunk, how are frames belonging to the native VLAN handled?

    1. They are tagged with VLAN ID 0
    2. They are always double-tagged
    3. They are transmitted untagged Correct answer.
    4. They are tagged with the highest VLAN ID on the trunk

    Explanation

    802.1Q inserts a tag into frames for every VLAN except the native VLAN, whose traffic crosses the trunk without a tag. Both ends of the trunk must agree on the native VLAN, or frames can be placed into the wrong VLAN at the far end.

  53. Question 53Network implementation

    Which fiber connector uses a 1.25 mm ferrule with a latching clip and is commonly found on SFP transceivers?

    1. F-type
    2. ST
    3. LC Correct answer.
    4. SC

    Explanation

    The LC connector uses a small 1.25 mm ferrule with a latch and is widely used on SFP and SFP+ optics and high-density patch panels. SC and ST use larger 2.5 mm ferrules, and F-type is a coaxial connector.

  54. Question 54Network implementation

    Which DNS record type maps a hostname to an IPv4 address?

    1. A Correct answer.
    2. PTR
    3. AAAA
    4. CNAME

    Explanation

    An A record resolves a fully qualified domain name to an IPv4 address, while AAAA does the same for IPv6. CNAME records alias one name to another, and PTR records support reverse lookups.

  55. Question 55Network implementation

    Which statement correctly describes OSPF?

    1. It is a path-vector protocol that uses TCP port 179
    2. It is a hybrid protocol that uses hop count as its metric
    3. It is a link-state interior gateway protocol Correct answer.
    4. It is a distance-vector exterior gateway protocol

    Explanation

    OSPF is a link-state interior gateway protocol that floods link-state advertisements and runs the Dijkstra shortest-path algorithm, using cost derived from interface bandwidth as its metric. Path-vector protocols with TCP 179 describe BGP, and hop-count metrics describe RIP.

  56. Question 56Network implementation

    Which transport protocol and port does BGP use to establish peering sessions?

    1. TCP 179 Correct answer.
    2. UDP 179
    3. UDP 520
    4. TCP 646

    Explanation

    BGP forms neighbor sessions over TCP port 179 so that updates are delivered reliably, then selects paths using attributes such as AS-path length and local preference. UDP is not used for BGP peering.

  57. Question 57Network implementation

    Which route entry in a routing table represents a default route?

    1. 0.0.0.0/0 Correct answer.
    2. 127.0.0.1/8
    3. 0.0.0.0/32
    4. 255.255.255.255/32

    Explanation

    A prefix of 0.0.0.0/0 has a zero-length mask and therefore matches every destination, so it is used only when no more specific route exists. It is commonly configured as a quad-zero route toward an ISP next hop.

  58. Question 58Network implementation

    How many bits does the VLAN identifier field occupy inside an 802.1Q tag?

    1. 12 bits Correct answer.
    2. 4 bits
    3. 16 bits
    4. 8 bits

    Explanation

    The 802.1Q tag is 4 bytes long and contains a 12-bit VLAN ID, which permits usable VLAN numbers from 1 through 4094. The tag also carries a 3-bit priority field used for class-of-service marking.

  59. Question 59Network implementation

    Which set lists the port states defined by Rapid Spanning Tree Protocol?

    1. Discarding, learning, forwarding Correct answer.
    2. Blocking, listening, learning, forwarding
    3. Disabled, blocking, listening, forwarding
    4. Learning, forwarding, blocking

    Explanation

    RSTP collapses the legacy 802.1D states into three: discarding, learning, and forwarding, and it converges quickly using a proposal and agreement handshake. The longer four-state lists describe classic STP behavior.

  60. Question 60Network implementation

    Which three 2.4 GHz channels are conventionally used as non-overlapping channels in North America?

    1. 2, 7, 12
    2. 1, 5, 9
    3. 1, 4, 8
    4. 1, 6, 11 Correct answer.

    Explanation

    In the North American channel plan, 2.4 GHz channels are 5 MHz apart while each 20 MHz signal spans about five channels, so only 1, 6, and 11 avoid overlapping energy. Channels 12 and 13 are not permitted in that regulatory domain.

  61. Question 61Network implementation

    Which key-exchange method does WPA3-Personal use for authentication?

    1. 802.1X with PEAP
    2. SAE (Dragonfly) Correct answer.
    3. WEP with open authentication
    4. WPA2-PSK with TKIP

    Explanation

    WPA3-Personal replaces the WPA2 preshared-key four-way handshake with SAE, a dragonfly-based exchange that provides forward secrecy and resists offline dictionary attacks against captured handshakes. WPA2-Enterprise-style methods rely on 802.1X instead.

  62. Question 62Network implementation

    Which feature lets many internal hosts share a single public IPv4 address at the same time?

    1. Port forwarding
    2. Static NAT
    3. Dynamic NAT
    4. PAT Correct answer.

    Explanation

    PAT, also called NAT overload, translates the source address and source port together so many inside hosts multiplex over one public address using unique port numbers. Static and dynamic NAT map addresses one-to-one and cannot scale this way.

  63. Question 63Network implementation

    Clients on VLAN 20 must obtain addresses from a DHCP server that resides on VLAN 30. What should be configured on the VLAN 20 gateway interface?

    1. A static route to the DHCP server
    2. A DHCP relay scope on the VLAN 30 gateway
    3. Proxy ARP on the VLAN 30 interface
    4. An IP helper address Correct answer.

    Explanation

    DHCP Discover messages are broadcasts, which routers do not forward by default, so an IP helper-address on the client-facing interface relays them as unicast to the remote server. The server then replies through the relay agent so the client can complete the lease.

  64. Question 64Network implementation

    Which transport protocol and port number does NTP use?

    1. TCP 123
    2. UDP 123 Correct answer.
    3. TCP 443
    4. UDP 161

    Explanation

    NTP servers listen on UDP port 123 and clients exchange timestamp packets with them to synchronize clocks. Port 161 belongs to SNMP and port 443 to HTTPS.

  65. Question 65Network implementation

    A switch port is manually configured for 100 Mbps full duplex while the connected device is left on auto-negotiation. Users report slow throughput and the interface shows late collisions and FCS errors. What is the most likely cause?

    1. An incorrect VLAN assignment
    2. A duplex mismatch Correct answer.
    3. A broadcast storm
    4. An STP topology change

    Explanation

    When one side is hard-set to full duplex and the other auto-negotiates, the auto-negotiating side typically falls back to half duplex, producing late collisions, FCS errors, and poor throughput. Both ends should be configured identically, preferably by leaving both on auto-negotiation.

  66. Question 66Network implementation

    Which combination provides centralized, per-user authentication for wireless clients joining an enterprise SSID?

    1. A captive portal with a preshared key
    2. 802.1X with a RADIUS server Correct answer.
    3. WPA2-Personal with a shared passphrase
    4. MAC filtering on the wireless controller

    Explanation

    WPA2- or WPA3-Enterprise uses 802.1X so each client authenticates with unique credentials to a RADIUS server, which can return per-user VLAN or role assignments. A preshared key is known by everyone and provides no individual accountability.

  67. Question 67Network implementation

    Three routers share an OSPF broadcast segment. R1 has priority 1; R2 has priority 100 and router ID 2.2.2.2; R3 has priority 100 and router ID 3.3.3.3. Which router becomes the designated router?

    1. R3 Correct answer.
    2. R1
    3. No DR is elected until the current DR fails
    4. R2

    Explanation

    OSPF elects the interface with the highest priority first and breaks ties with the highest router ID, so R3 defeats R2 despite identical priorities and beats R1's priority of 1. The election is not preemptive, so the result stands until the DR fails or the OSPF process restarts.

  68. Question 68Network implementation

    Four switches run STP with default priorities except SW2, which is configured with a bridge priority of 4096. Which switch becomes the root bridge?

    1. The switch elected by the least-cost path to the server
    2. SW2, because it has the lowest bridge ID Correct answer.
    3. The switch closest to the default gateway
    4. The switch with the highest MAC address

    Explanation

    The root bridge is the switch with the lowest bridge ID, which combines the 2-byte priority with the 6-byte MAC address. Lowering the priority below the default 32768 makes SW2 the root regardless of the other switches' MAC addresses.

  69. Question 69Network implementation

    A router's table contains 10.0.0.0/8 via R1, 10.20.0.0/16 via R2, 10.20.30.0/24 via R3, and 0.0.0.0/0 via R4. Where is a packet destined for 10.20.30.55 forwarded?

    1. R3 Correct answer.
    2. R1
    3. R2
    4. R4

    Explanation

    When multiple entries match a destination, the router chooses the route with the longest prefix, that is, the highest mask length. The /24 entry through R3 matches 10.20.30.55 more specifically than the /16, /8, or default route.

  70. Question 70Network implementation

    A frame arrives at SW1 on an access port assigned to VLAN 20 and must cross an 802.1Q trunk to SW2. VLAN 20 is not the native VLAN. What does SW1 do before transmitting the frame over the trunk?

    1. Encapsulates it in an ISL header
    2. Rewrites the source MAC address
    3. Forwards it untagged to the trunk
    4. Adds an 802.1Q tag for VLAN 20 Correct answer.

    Explanation

    On an 802.1Q trunk every VLAN except the native VLAN is identified by a tag inserted into the Ethernet frame, so the receiving switch can return the frame to the correct VLAN. Native VLAN frames are the only ones that cross untagged.

  71. Question 71Network implementation

    An engineer bundles four switch ports into an LACP port channel. Which condition must be true for the bundle to form properly?

    1. Identical speed and VLAN settings on each link Correct answer.
    2. Member links terminated on at least three switches
    3. A unique spanning-tree cost on every member link
    4. Each link assigned to a separate VLAN for load balancing

    Explanation

    LACP and PAgP require member interfaces to share consistent speed, duplex, and VLAN or trunking configuration; mismatches keep the bundle from forming or make it flap. The channel is treated as a single logical link, so STP does not see the members as redundant paths.

  72. Question 72Network implementation

    Which Ethernet standard specifies 10 Gbps operation over twisted-pair copper cabling for distances up to 100 meters?

    1. 10GBASE-T Correct answer.
    2. 10GBASE-LR
    3. 10GBASE-ER
    4. 10GBASE-SR

    Explanation

    10GBASE-T is the IEEE standard for 10 Gbps Ethernet over twisted-pair copper, supporting runs up to 100 m with Cat6a or better cabling. The other variants use fiber optics with different reach characteristics.

  73. Question 73Network implementation

    Which IPv6 address type delivers a single packet to every interface that has joined a specific group?

    1. Anycast
    2. Broadcast
    3. Unicast
    4. Multicast Correct answer.

    Explanation

    IPv6 multicast sends one packet to all interfaces that have joined the targeted multicast group. IPv6 has no broadcast type; anycast delivers to the nearest member of a group, and unicast targets one interface.

  74. Question 74Network implementation

    Which IEEE wireless standard introduced operation in the 6 GHz frequency band?

    1. 802.11g
    2. 802.11ax Correct answer.
    3. 802.11ac
    4. 802.11n

    Explanation

    Wi-Fi 6E extends 802.11ax to the 6 GHz band, adding clean spectrum and more channels. 802.11n and 802.11g operate in 2.4/5 GHz, and 802.11ac operates only in 5 GHz.

  75. Question 75Network implementation

    Which DNS record type identifies the mail server that accepts email for a domain?

    1. A
    2. CNAME
    3. PTR
    4. MX Correct answer.

    Explanation

    MX records point to the mail exchange hosts responsible for accepting email for a domain, with a preference value for ordering. A records map names to IPv4 addresses, CNAME creates an alias, and PTR supports reverse lookups.

  76. Question 76Network implementation

    A Layer 3 switch must route traffic between VLAN 10 and VLAN 20. Which configuration accomplishes this?

    1. Enable proxy ARP on the default gateway
    2. Create an EtherChannel between access ports
    3. Create a switched virtual interface per VLAN Correct answer.
    4. Configure an 802.1Q trunk between the two VLANs

    Explanation

    A Layer 3 switch routes between VLANs by assigning an IP address to an SVI for each VLAN and enabling IP routing. The SVI acts as the default gateway for hosts in that VLAN. Trunks and EtherChannels are Layer 2 constructs and do not by themselves route between subnets.

  77. Question 77Network implementation

    Which feature should be enabled on a switch access port connected to an end-user workstation so the port can begin forwarding immediately?

    1. Loop guard
    2. PortFast Correct answer.
    3. BPDU guard
    4. Root guard

    Explanation

    PortFast allows an access port to transition directly to the forwarding state, avoiding the normal STP listening and learning delays. It should be used only on ports connected to end devices, often together with BPDU guard to protect against loops.

  78. Question 78Network implementation

    Which protocol provides a shared virtual default gateway so hosts keep connectivity if one router fails?

    1. VRRP Correct answer.
    2. OSPF
    3. STP
    4. LACP

    Explanation

    VRRP presents a shared virtual IP and MAC address to hosts, and a backup router takes over if the master fails. This first-hop redundancy keeps the default gateway reachable without host reconfiguration.

  79. Question 79Network implementation

    Which IPv4 header field carries the DSCP value used for QoS classification?

    1. ToS Correct answer.
    2. Checksum
    3. Flags
    4. TTL

    Explanation

    The Type of Service byte in the IPv4 header contains the DSCP bits that mark a packet's forwarding class for QoS. Routers and switches read this marking to apply queuing and prioritization.

  80. Question 80Network implementation

    What is the maximum hop count a RIP route can use before the destination is considered unreachable?

    1. 31
    2. 255
    3. 16
    4. 15 Correct answer.

    Explanation

    RIP defines a maximum usable hop count of 15; a metric of 16 is treated as infinity and marks the route unreachable. This limits RIP to relatively small networks.

  81. Question 81Network implementation

    Which switch feature blocks DHCP offers arriving on untrusted ports to prevent rogue DHCP servers?

    1. Port security
    2. DHCP snooping Correct answer.
    3. IP source guard
    4. Dynamic ARP inspection

    Explanation

    DHCP snooping classifies ports as trusted or untrusted and drops DHCP server messages received on untrusted ports. It can also build a binding table that supports DAI and IP source guard.

  82. Question 82Network implementation

    Which IPsec protocol encrypts the packet payload to provide confidentiality?

    1. GRE
    2. ESP Correct answer.
    3. IKE
    4. AH

    Explanation

    ESP (Encapsulating Security Payload) provides confidentiality through encryption and can also offer integrity and authentication. AH provides integrity and authentication but not encryption; IKE negotiates security associations, and GRE is a tunneling protocol.

  83. Question 83Network implementation

    What is the primary function of VXLAN in a data center network?

    1. Replacing BGP with a distance-vector routing protocol
    2. Tunneling Layer 2 frames over a Layer 3 network Correct answer.
    3. Encrypting all traffic between separate data center sites
    4. Automatically assigning IPv6 addresses to virtual machines

    Explanation

    VXLAN encapsulates original Layer 2 frames inside UDP/IP packets so they can cross a routed Layer 3 underlay, using a 24-bit VNI to identify the overlay segment. This extends Layer 2 domains across a data center without large flat Layer 2 fabrics.

  84. Question 84Network implementation

    A router has connected routes for 172.16.0.0/24 through 172.16.7.0/24. Which summary route covers exactly these eight networks?

    1. 172.16.0.0/22
    2. 172.16.0.0/21 Correct answer.
    3. 172.16.0.0/23
    4. 172.16.0.0/20

    Explanation

    Eight /24 networks align on a /21 boundary (24 - 3 = 21), so 172.16.0.0/21 covers 172.16.0.0 through 172.16.7.255. A /22 would cover only four /24s, and a /20 would include more than the eight listed networks.

  85. Question 85Network implementation

    In the BGP best-path selection process, which attribute is evaluated first?

    1. Weight Correct answer.
    2. MED
    3. AS Path
    4. Local Preference

    Explanation

    Cisco BGP evaluates weight first among the common attributes, preferring the path with the highest weight. Local preference, locally originated routes, AS path length, origin, MED, and other tiebreakers are considered later.

  86. Question 86Network implementation

    Which IEEE PoE standard can deliver up to 90 W over four pairs of Ethernet cabling?

    1. 802.3af
    2. 802.3bt Correct answer.
    3. 802.3at
    4. 802.3az

    Explanation

    802.3bt (PoE++) defines Type 3 and Type 4 power levels, with Type 4 supporting up to 90 W at the PSE over four pairs. 802.3af provides up to 15.4 W, 802.3at up to 30 W, and 802.3az is an energy-efficiency standard.

  87. Question 87Network operations

    A technician needs to identify which physical switch port connects to a specific wall jack before replacing a patch cable. Which documentation artifact is most directly useful?

    1. An incident response runbook
    2. A QoS policy summary
    3. A change advisory board meeting charter
    4. A labeled physical topology diagram Correct answer.

    Explanation

    Physical topology diagrams document cabling paths, jack locations, and port assignments. They let technicians trace a connection without disrupting production services. Policy and incident documents do not record physical port-to-jack mappings.

  88. Question 88Network operations

    Which message does a DHCP client broadcast first when it needs to obtain an IP address?

    1. DHCPOFFER
    2. DHCPACK
    3. DHCPREQUEST
    4. DHCPDISCOVER Correct answer.

    Explanation

    DHCP uses the DORA sequence: Discover, Offer, Request, and Acknowledge. The client begins by broadcasting DHCPDISCOVER to locate available servers. The server then offers an address, the client requests it, and the server acknowledges the lease.

  89. Question 89Network operations

    What does an A record in DNS provide?

    1. It delegates a zone to another name server.
    2. It maps an IPv4 address to a hostname.
    3. It maps a hostname to an IPv4 address. Correct answer.
    4. It identifies the mail servers for a domain.

    Explanation

    An A record maps a fully qualified domain name to an IPv4 address. Reverse lookups use PTR records, while MX records identify mail servers and NS records identify name servers.

  90. Question 90Network operations

    Which syslog severity level is more severe than warning, which is level 4?

    1. 6, Informational
    2. 7, Debug
    3. 3, Error Correct answer.
    4. 5, Notice

    Explanation

    Syslog severity levels use lower numbers for more severe conditions. Warning is level 4, so level 3 Error is more severe. Levels 5 through 7 are progressively less severe.

  91. Question 91Network operations

    Which backup type copies all selected data every time it runs and does not depend on previous backups?

    1. Full Correct answer.
    2. Incremental
    3. Differential
    4. Snapshot

    Explanation

    A full backup copies all selected data each time it runs and is self-contained for restoration. Incremental and differential backups depend on a prior full backup. Snapshots capture a point-in-time state and may rely on underlying storage.

  92. Question 92Network operations

    Which tool verifies basic IP reachability by sending ICMP echo requests?

    1. ping Correct answer.
    2. traceroute
    3. netstat
    4. nslookup

    Explanation

    Ping sends ICMP echo requests and reports whether echo replies are received. It is commonly used to confirm that a host is reachable at the IP layer. Traceroute maps paths, nslookup queries DNS, and netstat shows local connections.

  93. Question 93Network operations

    What is the primary purpose of a rollback plan in change management?

    1. To schedule changes during business hours
    2. To measure packet loss after the change
    3. To restore the prior known-good state if the change fails Correct answer.
    4. To record the names of everyone who approved the change

    Explanation

    A rollback plan defines how to return a system to its previous working state when a change causes problems. It reduces downtime and gives responders a tested recovery path. Approval records and post-change measurements are separate change-management activities.

  94. Question 94Network operations

    Which device provides temporary battery power to networking equipment during a short power outage?

    1. Surge suppressor
    2. UPS Correct answer.
    3. PDU
    4. Generator

    Explanation

    An uninterruptible power supply contains batteries that provide immediate temporary power during an outage. A PDU distributes power, a surge suppressor only limits voltage spikes, and a generator typically takes longer to start and supports longer outages.

  95. Question 95Network operations

    Which SNMP message is sent by an agent without a preceding request from the manager?

    1. SetRequest
    2. GetRequest
    3. Trap Correct answer.
    4. GetResponse

    Explanation

    An SNMP trap is an unsolicited notification from an agent to a manager when an event occurs. GetRequest and SetRequest originate from the manager, and GetResponse answers a manager request.

  96. Question 96Network operations

    What does a NetFlow record primarily describe?

    1. A full packet capture including every payload byte and header
    2. A DNS zone transfer log entry
    3. A device configuration revision history entry
    4. A source-to-destination flow with ports and protocol Correct answer.

    Explanation

    NetFlow summarizes traffic as flows identified by source, destination, ports, protocol, and related counters. It does not capture full packet payloads. Flow data is used for traffic accounting, capacity planning, and anomaly detection.

  97. Question 97Network operations

    A network engineer needs to send copies of traffic from a production switch port to an analysis tool. Which feature should be configured?

    1. Link aggregation
    2. Storm control
    3. Port mirroring Correct answer.
    4. Spanning Tree Protocol

    Explanation

    Port mirroring copies traffic from one or more switch ports to a designated monitoring port. This allows an analyzer to inspect traffic without being inline. Link aggregation combines links, storm control limits broadcast floods, and STP prevents Layer 2 loops.

  98. Question 98Network operations

    Which metric states the maximum acceptable amount of data loss measured in time?

    1. RTO
    2. MTBF
    3. MTTR
    4. RPO Correct answer.

    Explanation

    Recovery point objective defines how much data loss, expressed as time, an organization can tolerate. It drives backup frequency and replication design. RTO concerns restoration time, while MTBF and MTTR describe reliability and repair.

  99. Question 99Network operations

    Which metric states the maximum acceptable time to restore a service after an outage?

    1. MTBF
    2. RTO Correct answer.
    3. MTTR
    4. RPO

    Explanation

    Recovery time objective defines the target time within which a service must be restored after disruption. It drives redundancy, staffing, and recovery procedures. RPO concerns data loss, while MTBF and MTTR are reliability measures.

  100. Question 100Network operations

    A service level agreement promises a mean time to repair of four hours. Which operational measure does this directly constrain?

    1. Percentage of packets dropped during the busiest peak hours
    2. Total number of incidents opened per month
    3. Average time from detection to service restoration Correct answer.
    4. Amount of backup data retained each week

    Explanation

    Mean time to repair measures the average elapsed time from failure or detection until service is restored. An SLA target for MTTR directly limits that average restoration time. Incident volume, packet loss, and backup retention are different operational metrics.

  101. Question 101Network operations

    What is the primary function of IP address management (IPAM)?

    1. Tracking address assignments and usage Correct answer.
    2. Encrypting management traffic between routers
    3. Balancing traffic across multiple WAN links
    4. Filtering inbound email by sender reputation

    Explanation

    IPAM systems track which addresses are assigned, reserved, or available across subnets. They help prevent duplicate assignments and support planning and auditing. Encryption, WAN balancing, and email filtering are unrelated functions.

  102. Question 102Network operations

    Why is consistent time synchronization important for network operations?

    1. It aligns log timestamps and authentication events Correct answer.
    2. It assigns VLAN IDs to switch ports
    3. It compresses log files automatically
    4. It increases the wireless signal strength for all clients

    Explanation

    Synchronized clocks make it possible to correlate events across devices, logs, and authentication systems. Accurate timestamps are essential for troubleshooting, forensics, and compliance. Time synchronization does not affect signal strength, log compression, or VLAN assignment.

  103. Question 103Network operations

    Why should network device configurations be backed up to an external repository?

    1. To reduce the size of routing tables
    2. To increase the device's RAM capacity
    3. To restore a device after failure or misconfiguration Correct answer.
    4. To eliminate the need for a formal change management process

    Explanation

    External configuration backups allow rapid restoration after hardware replacement, accidental changes, or corruption. They also provide a known-good reference for audits and comparisons. Backups do not add memory, replace change control, or shrink routing tables.

  104. Question 104Network operations

    Which action best ensures voice traffic receives low latency and low jitter?

    1. Classify voice traffic into a high-priority queue Correct answer.
    2. Disable QoS on WAN interfaces
    3. Place voice traffic in the default best-effort queue
    4. Apply a bandwidth limit to all voice packets

    Explanation

    QoS classification places voice packets into a high-priority queue so they are forwarded before less delay-sensitive traffic. Voice is sensitive to latency, jitter, and loss, so best-effort treatment is unsuitable. Disabling QoS or limiting all voice packets would degrade call quality.

  105. Question 105Network operations

    A DHCP client on a subnet with no local DHCP server needs an address. What must the router interface do?

    1. Block UDP port 67 and 68
    2. Assign a static address from its ARP table
    3. Act as a DNS forwarder
    4. Relay DHCP messages to a configured server Correct answer.

    Explanation

    A DHCP relay agent forwards client broadcasts to a DHCP server on another subnet. The router interface must be configured with the server address and an address on the client subnet. DNS forwarding and ARP tables do not provide DHCP service.

  106. Question 106Network operations

    How does a DHCP reservation identify the client that should always receive a specific address?

    1. By the client's DNS zone
    2. By the client's default gateway
    3. By the client's MAC address Correct answer.
    4. By the client's TCP window size

    Explanation

    A DHCP reservation binds a specific IP address to a client's MAC address. When that client requests a lease, the server returns the reserved address. DNS zones, TCP window size, and default gateway do not identify the client for reservation.

  107. Question 107Network operations

    A device has an MTBF of 1,000 hours and an MTTR of 10 hours. What is its approximate availability?

    1. 98.99%
    2. 99.01% Correct answer.
    3. 99.10%
    4. 99.00%

    Explanation

    Availability is calculated as MTBF divided by MTBF plus MTTR. Here, 1,000 divided by 1,010 equals about 0.9901, or 99.01%. The other values result from incorrect rounding or misapplying the formula.

  108. Question 108Network operations

    Which SNMPv3 security level provides both message authentication and payload encryption?

    1. authPriv Correct answer.
    2. noAuthNoPriv
    3. SNMPv2c community string
    4. authNoPriv

    Explanation

    SNMPv3 authPriv uses authentication to verify message integrity and origin and privacy to encrypt the payload. authNoPriv authenticates but does not encrypt, and noAuthNoPriv provides neither. SNMPv2c community strings are not an SNMPv3 security level.

  109. Question 109Network operations

    Which power design best protects a switch with dual power supplies from a single PDU failure?

    1. Connect one supply and leave the other unplugged
    2. Connect each supply to a separate PDU circuit Correct answer.
    3. Use a single surge suppressor for both supplies
    4. Connect both supplies to the same PDU

    Explanation

    Dual power supplies provide redundancy only when they draw power from independent sources. Connecting each supply to a separate PDU on a different circuit prevents one PDU failure from removing power from both supplies. Sharing a PDU or suppressor creates a single point of failure.

  110. Question 110Network operations

    Which port is commonly used for syslog over TLS?

    1. 162
    2. 6514 Correct answer.
    3. 4789
    4. 514

    Explanation

    Syslog over TLS commonly uses TCP port 6514 to protect log transport with encryption. Traditional syslog often uses UDP port 514, SNMP traps use port 162, and VXLAN uses port 4789.

  111. Question 111Network operations

    A switch port consistently reports late collisions. Which condition is the most likely cause?

    1. A duplex mismatch on the link Correct answer.
    2. A cable that is shorter than the minimum length
    3. An incorrect VLAN assignment
    4. A speed mismatch on a trunk

    Explanation

    Late collisions occur after the first 64 bytes of a frame and commonly indicate a duplex mismatch. One side may transmit while the other side is also transmitting, causing collisions beyond the normal collision window. Short cables, VLAN errors, and speed mismatches typically produce different symptoms.

  112. Question 112Network operations

    Which syslog severity level indicates that the system is unusable and carries the highest priority?

    1. Alert (severity 1)
    2. Critical (severity 2)
    3. Emergency (severity 0) Correct answer.
    4. Notification (severity 5)

    Explanation

    Syslog severities are numbered 0 through 7, and lower numbers are more severe. Severity 0, Emergency, means the system itself is unusable and is the most urgent message an agent can send.

  113. Question 113Network operations

    What is the primary role of a change advisory board (CAB)?

    1. To monitor network devices for faults after a change window closes
    2. To maintain the asset inventory of spare hardware in the data center
    3. To review proposed changes and approve or reject them Correct answer.
    4. To perform the technical implementation of approved network changes

    Explanation

    The CAB is a review body that assesses the risk, impact, and scheduling of proposed changes before they are authorized. Implementation is done by technicians under the approved change record, not by the board itself.

  114. Question 114Network operations

    A technician needs to identify which IP subnet and VLAN a newly installed file server belongs to. Which document should the technician consult?

    1. The cable labeling schedule for the data center
    2. The rack elevation diagram
    3. The logical network diagram Correct answer.
    4. The device's running configuration backup

    Explanation

    A logical topology diagram records addressing, subnets, VLANs, and device relationships independent of physical location. It is the standard reference for mapping an address plan to hosts and segments.

  115. Question 115Network operations

    An NTP server that is synchronized directly to an authoritative reference clock, such as a GPS receiver, operates at which stratum level?

    1. Stratum 0
    2. Stratum 3
    3. Stratum 1 Correct answer.
    4. Stratum 2

    Explanation

    Stratum 1 servers take their time directly from a stratum 0 reference device such as a GPS or atomic clock. Each additional layer of NTP hierarchy increments the stratum number by one.

  116. Question 116Network operations

    Which SNMP notification type requires the agent to receive a confirmation from the manager?

    1. GetBulk request
    2. Trap
    3. Inform request Correct answer.
    4. Set request

    Explanation

    An SNMP inform is an acknowledged notification; the agent retransmits it if the manager does not respond. A trap is the unacknowledged equivalent, sent once with no confirmation.

  117. Question 117Network operations

    A copper uplink shows steadily increasing CRC and input errors with no collision counters incrementing. Which cause is most likely?

    1. An incorrect default gateway on the attached host
    2. A duplex mismatch configured on the local link
    3. Broadcast storms caused by a switching loop
    4. A damaged cable or faulty connector Correct answer.

    Explanation

    CRC and frame check errors mean frames arrive corrupted at the physical layer, which points to cabling, connectors, or interference. A duplex mismatch would also drive up collision counters, and a loop or gateway error would not corrupt individual frames.

  118. Question 118Network operations

    Which field carries Layer 3 QoS markings that routers can honor without inspecting upper-layer headers?

    1. The IP identification field
    2. The TCP window size field
    3. The 802.1Q priority code point (PCP) field
    4. The DSCP field in the IP header Correct answer.

    Explanation

    DSCP occupies six bits of the former ToS byte in the IP header, so it is preserved across routed hops and readable by any Layer 3 device. Layer 2 markings such as PCP are stripped when frames are routed between segments.

  119. Question 119Network operations

    Which feature stops an unauthorized device from acting as a DHCP server on an access switch port?

    1. 802.1X port-based authentication
    2. Dynamic ARP inspection
    3. Port security with sticky MAC addresses
    4. DHCP snooping Correct answer.

    Explanation

    DHCP snooping marks ports as trusted or untrusted and drops DHCP server messages arriving on untrusted ports, which blocks rogue servers. It also builds the binding table used by other protections.

  120. Question 120Network operations

    What is the purpose of a first-hop redundancy protocol such as VRRP or HSRP?

    1. To prevent Layer 2 loops by blocking redundant switch links
    2. To load balance traffic across equal-cost paths to a destination
    3. To spread a single subnet's traffic across multiple VLANs
    4. To provide a virtual gateway address that survives a router failure Correct answer.

    Explanation

    First-hop redundancy protocols present hosts with a shared virtual IP and MAC address served by an active and a standby router. If the active router fails, the standby assumes the virtual address so hosts keep their configured gateway.

  121. Question 121Network operations

    Which description best characterizes a warm disaster recovery site?

    1. A fully equipped duplicate data center that can take over immediately with no data loss
    2. A cloud region that mirrors production in real time with automatic failover
    3. A site with hardware and connectivity ready but stale or no current data Correct answer.
    4. An empty space with power and cooling only, awaiting delivered equipment

    Explanation

    A warm site has the space, power, network, and usually hardware in place, but production data must be restored or refreshed before it can serve users. This places it between a cold site, which has almost nothing prepared, and a hot site, which is ready for immediate cutover.

  122. Question 122Network operations

    Three switches form a triangle. Switch A has priority 32768 and MAC 00:11:22:33:44:55, Switch B has priority 32768 and MAC 00:11:22:33:44:11, and Switch C has priority 4096 and MAC 00:11:22:33:44:99. Which switch becomes the Spanning Tree root bridge?

    1. Switch C, because it has the lowest bridge priority value Correct answer.
    2. No root is elected until the priorities are manually equalized
    3. Switch A, because it has the highest MAC address of the default-priority switches
    4. Switch B, because it has the lowest MAC address of the three

    Explanation

    Spanning Tree elects the bridge with the lowest bridge ID, and the bridge ID is composed of the priority first and the MAC address only as a tiebreaker. Switch C's priority of 4096 is lower than 32768, so it wins before the MAC addresses are ever compared.

  123. Question 123Network operations

    A switch provides a 370 W PoE budget. Twelve access points drawing 25.5 W each are already powered by it. How many additional 25.5 W access points can be powered within budget?

    1. Three
    2. Four
    3. Five
    4. Two Correct answer.

    Explanation

    Twelve access points consume 12 x 25.5 W = 306 W, leaving 64 W of headroom. Each additional unit needs 25.5 W, so only two more (51 W) fit before the budget would be exceeded.

  124. Question 124Network operations

    WAN link utilization has climbed from 40% to 85% of capacity over six weeks with no reported user complaints. What is the most appropriate operational response?

    1. Compare the trend to the baseline and plan an upgrade Correct answer.
    2. Increase the interface MTU so that more data fits per frame
    3. Reset the interface counters to clear the elevated readings
    4. Enable a routing protocol to reduce the number of hops

    Explanation

    A sustained upward trend against a documented performance baseline is the signal to forecast growth and schedule capacity changes before the link saturates. Reacting only after users complain leaves no lead time for procurement and maintenance windows.

  125. Question 125Network security

    An attacker reads customer records stored on a server but does not modify or delete them. Which element of the CIA triad was compromised?

    1. Confidentiality Correct answer.
    2. Non-repudiation
    3. Availability
    4. Integrity

    Explanation

    Confidentiality means information is disclosed only to authorized parties, so unauthorized reading of records is a confidentiality breach. Integrity concerns unauthorized changes to data, and availability concerns reliable access to data. Non-repudiation is a separate concept outside the CIA triad.

  126. Question 126Network security

    Which attack type is designed to consume a system's resources so that legitimate users can no longer reach it?

    1. Denial of service Correct answer.
    2. VLAN hopping
    3. Shoulder surfing
    4. Phishing

    Explanation

    A denial-of-service attack exhausts bandwidth, sessions, or processing capacity so that valid requests cannot be served. It targets availability rather than confidentiality or integrity. The other options are credential-theft or segmentation-bypass techniques.

  127. Question 127Network security

    A technician powers on a new managed switch and finds its management interface reachable with the vendor's documented login. What should be done first?

    1. Enable Telnet for remote administration
    2. Disable logging to reduce overhead
    3. Move the interface to VLAN 1
    4. Change the default administrator credentials Correct answer.

    Explanation

    Default credentials are published in vendor documentation and are the first thing an attacker tries, so they must be replaced before the device is connected to production. Enabling Telnet or staying on VLAN 1 would weaken security further. Logging should be retained, not disabled.

  128. Question 128Network security

    An employee receives an email that looks like it came from the IT department and asks them to click a link and re-enter their password. Which attack is this?

    1. Evil twin
    2. Phishing Correct answer.
    3. On-path attack
    4. Tailgating

    Explanation

    Phishing uses a fraudulent message that impersonates a trusted sender to harvest credentials or deliver malware. It relies on social engineering rather than technical interception. The other options describe wireless, physical, and traffic-interception attacks.

  129. Question 129Network security

    Which wireless security option provides the strongest protection for a small office that has no authentication server?

    1. WPA with TKIP
    2. WPA3-Personal Correct answer.
    3. WPA2-Personal
    4. WEP

    Explanation

    WPA3-Personal uses SAE, which resists offline dictionary attacks against captured handshakes, making it the strongest option among those listed. WEP and TKIP-based WPA are deprecated and broken. WPA2-Personal is still acceptable but weaker than WPA3.

  130. Question 130Network security

    A hardware token that displays a rotating one-time code belongs to which authentication factor category?

    1. Something you are
    2. Something you know
    3. Somewhere you are
    4. Something you have Correct answer.

    Explanation

    Factors are grouped as knowledge (something you know), possession (something you have), inherence (something you are), and location. A physical token is possessed by the user, so it is a possession factor. Combining it with a password satisfies multifactor authentication.

  131. Question 131Network security

    Where should a web server that must be reachable from the internet be placed?

    1. On the database server segment
    2. In a screened subnet (DMZ) Correct answer.
    3. On the management VLAN
    4. On the internal user VLAN

    Explanation

    A screened subnet, also called a DMZ, is a buffer segment reachable from the internet but isolated from internal hosts by filtering, so a compromised public server cannot directly reach internal systems. Placing the server on user, management, or database segments exposes those assets to internet-sourced attacks.

  132. Question 132Network security

    Which physical security control prevents tailgating by admitting only one person at a time into a secured area?

    1. Bollards
    2. Access control vestibule Correct answer.
    3. Badge reader with PIN
    4. Video surveillance system

    Explanation

    An access control vestibule, also called a mantrap, uses interlocking doors so that only one person can be inside at a time, defeating tailgating. Bollards stop vehicles, cameras record events after the fact, and badge readers authenticate a single credential but do not stop a second person from following through the door.

  133. Question 133Network security

    A packet capture shows that the MAC address mapped to the default gateway's IP address changes several times within a few minutes. Which attack does this indicate?

    1. VLAN hopping
    2. DHCP starvation
    3. ARP poisoning Correct answer.
    4. MAC flooding

    Explanation

    ARP poisoning sends forged ARP replies so that victims associate the gateway IP with the attacker's MAC, redirecting traffic through the attacker. The repeated MAC-to-IP changes are the signature of this attack. The other attacks target switch table capacity, VLAN boundaries, or DHCP pool exhaustion.

  134. Question 134Network security

    Which combination authenticates a device connected to a switch port before that port is placed into the production VLAN?

    1. 802.1AE with SNMPv3
    2. 802.1X with a RADIUS server Correct answer.
    3. 802.11i with a preshared key
    4. 802.1Q tagging with TACACS+

    Explanation

    802.1X is port-based network access control: the supplicant authenticates to an authenticator (the switch) that consults a RADIUS server, and the port stays in a restricted VLAN until authentication succeeds. 802.1Q is VLAN tagging, 802.11i is wireless security, and 802.1AE is MACsec encryption; none of these perform port admission.

  135. Question 135Network security

    Which switch feature drops DHCP offers arriving on ports that face user devices, preventing a rogue server from issuing leases?

    1. Port security
    2. DHCP snooping Correct answer.
    3. Dynamic ARP Inspection
    4. Storm control

    Explanation

    DHCP snooping classifies ports as trusted or untrusted and discards server messages such as OFFER and ACK that arrive on untrusted ports, so only the legitimate DHCP server can hand out addresses. Dynamic ARP Inspection validates ARP packets, storm control limits broadcast volume, and port security limits MAC addresses.

  136. Question 136Network security

    Which configuration change best prevents VLAN hopping through switch spoofing on a user-facing port?

    1. Place every user-facing port in the default VLAN
    2. Disable DTP and hard-code access mode Correct answer.
    3. Enable DTP on all user-facing ports for automatic negotiation
    4. Convert user ports to trunk links toward the distribution switch

    Explanation

    Switch spoofing works when a user port negotiates a trunk through DTP and the attacker can then tag frames for other VLANs. Hard-coding the port as an access port with DTP disabled removes the negotiation path. Leaving DTP enabled or creating trunks toward users preserves the vulnerability.

  137. Question 137Network security

    Which device inspects HTTP requests and blocks attempts to inject SQL code through web forms?

    1. A stateful packet filter
    2. A VPN concentrator
    3. A WAF Correct answer.
    4. A load balancer

    Explanation

    A web application firewall parses application-layer HTTP traffic and applies rules that detect and block injection, cross-site scripting, and similar payloads. A packet filter works at Layers 3 and 4, a load balancer distributes connections, and a VPN concentrator terminates tunnels; none understand HTTP payload semantics.

  138. Question 138Network security

    How does an intrusion prevention system differ from an intrusion detection system?

    1. It analyzes only flow records and never packet payloads
    2. It sits inline and can drop malicious traffic in real time Correct answer.
    3. It relies solely on vendor signature updates to detect attacks
    4. It is always placed outside the firewall at the internet edge

    Explanation

    An IPS is deployed inline so packets must pass through it, which lets it block or reset malicious traffic as it is detected. An IDS typically receives a copy of traffic through a SPAN or tap and can only alert. Signature use and placement vary in both technologies.

  139. Question 139Network security

    Which solution collects and correlates log data from firewalls, servers, and switches to alert on suspicious patterns?

    1. A syslog relay
    2. A packet broker
    3. A SIEM Correct answer.
    4. A load balancer

    Explanation

    A security information and event management system aggregates logs from many sources, normalizes them, and applies correlation rules so that events spanning multiple devices raise a single actionable alert. A syslog relay only forwards messages, a packet broker copies frames, and a load balancer distributes connections.

  140. Question 140Network security

    Which IPsec mode encapsulates the entire original IP packet inside a new IP header for gateway-to-gateway VPNs?

    1. Main mode
    2. Aggressive mode
    3. Tunnel mode Correct answer.
    4. Transport mode

    Explanation

    Tunnel mode encrypts the whole original packet and prepends a new IP header, so private addresses inside the tunnel are hidden from the transit network, which is what site-to-site VPNs require. Transport mode protects only the payload. Aggressive and main mode are IKE phase 1 negotiation modes, not IPsec encapsulation modes.

  141. Question 141Network security

    What is the primary security concern with split tunneling on a remote-access VPN?

    1. IPsec encryption is disabled when split tunneling is enabled
    2. Client internet traffic bypasses corporate security controls Correct answer.
    3. Users must re-authenticate for every internal application
    4. The VPN concentrator must assign two IP addresses to each client

    Explanation

    With split tunneling, only traffic destined for corporate subnets enters the tunnel while other traffic goes directly to the internet, so that traffic is not filtered or inspected by corporate security devices. Encryption of the tunneled traffic is unaffected, and address assignment and re-authentication are not inherent to split tunneling.

  142. Question 142Network security

    What is the purpose of deploying a honeypot on a network?

    1. To lure attackers and observe their activity Correct answer.
    2. To cache content closer to the requesting users
    3. To provide redundancy for authentication services
    4. To balance load across multiple web servers

    Explanation

    A honeypot is a decoy system with no production role, so any interaction with it is suspicious and can be studied to learn attacker tools and techniques while diverting attention from real assets. It does not cache, authenticate, or load balance. Honeypots are usually placed in an isolated segment to limit risk.

  143. Question 143Network security

    A scan reveals an unpatched public web server, and analysts estimate how likely and how damaging its exploitation would be. Which term describes that combined likelihood and impact?

    1. Exploit
    2. Vulnerability
    3. Threat
    4. Risk Correct answer.

    Explanation

    Risk expresses the probability that a threat will exploit a weakness multiplied by the impact if it does. A vulnerability is the weakness itself, a threat is a potential actor or event, and an exploit is the code or technique that takes advantage of the weakness.

  144. Question 144Network security

    Which attack fills a switch's forwarding table with bogus source MAC addresses so that it floods unicast frames out every port?

    1. MAC flooding Correct answer.
    2. ARP poisoning
    3. VLAN hopping
    4. DHCP starvation

    Explanation

    MAC flooding sends frames with many different source addresses, exhausting the CAM table, after which the switch cannot look up destinations and falls back to flooding frames. That lets an attacker on one port capture traffic meant for others. ARP poisoning, DHCP starvation, and VLAN hopping target different mechanisms.

  145. Question 145Network security

    Wireless clients keep dropping off an access point, and a capture shows forged deauthentication frames. Which measure best mitigates this?

    1. Lowering the AP transmit power
    2. Disabling SSID broadcast
    3. Enabling WEP with a 128-bit key
    4. Enabling 802.11w (PMF) Correct answer.

    Explanation

    Deauthentication frames are management frames, which legacy 802.11 networks send unauthenticated, so an attacker can spoof them. Protected Management Frames (802.11w) add integrity protection so forged management frames are rejected. WEP, SSID hiding, and power changes do not authenticate management frames.

  146. Question 146Network security

    Which protocol encrypts the full payload of device-administration traffic and separates authentication, authorization, and accounting for router and switch management?

    1. Kerberos
    2. RADIUS over UDP
    3. LDAP
    4. TACACS+ Correct answer.

    Explanation

    TACACS+ encrypts the entire packet body and treats authentication, authorization, and accounting as separate functions, which gives granular command-level control over network devices. RADIUS encrypts only the password field, and Kerberos and LDAP are directory or ticket-based services not designed for per-command device administration.

  147. Question 147Network security

    An internal server presents a certificate signed by its own private key. What happens when clients connect?

    1. Clients automatically trust it because it is X.509 compliant
    2. Clients reject it permanently and the session cannot be resumed
    3. Clients accept it only when the server also offers TLS 1.3
    4. Clients warn because no trusted CA has vouched for it Correct answer.

    Explanation

    Certificate trust comes from a chain to a CA in the client's trust store; a self-signed certificate has no such chain, so clients display a warning that the identity is unverified. The warning can be bypassed or the certificate can be imported into the trust store, so the connection is not permanently blocked. TLS version has no effect on trust.

  148. Question 148Network security

    Users report connecting to a wireless network with the correct SSID that redirects them to a fake login page. Which control best prevents this evil twin attack?

    1. Requiring EAP-TLS with server certificate validation Correct answer.
    2. Enabling MAC address filtering on the controller
    3. Increasing the WPA2-PSK passphrase to 30 characters
    4. Disabling SSID broadcast on the legitimate access point

    Explanation

    With EAP-TLS, the client validates the authentication server's certificate before sending credentials, so a rogue AP that cannot present a certificate chained to the trusted CA fails authentication. Hiding the SSID, filtering MAC addresses, and lengthening a preshared key do not prove the AP's identity to the client.

  149. Question 149Network security

    Which sequence reflects the standard order of incident response phases?

    1. Preparation, containment, detection and analysis, eradication, recovery, lessons learned
    2. Detection and analysis, preparation, containment, eradication, recovery, lessons learned
    3. Preparation, detection and analysis, containment, eradication, recovery, lessons learned Correct answer.
    4. Preparation, detection and analysis, eradication, containment, recovery, lessons learned

    Explanation

    Incident response begins with preparation, then moves through detection and analysis, containment, eradication, recovery, and finally post-incident activity such as lessons learned. Containment must follow analysis, and eradication of the root cause must follow containment. Recovery completes the technical response before the review.

  150. Question 150Network security

    Which characteristic distinguishes a worm from a virus?

    1. It hides inside a legitimate program and runs with that program's privileges
    2. It requires a user to open an infected file in order to spread
    3. It encrypts files and demands payment for the decryption key
    4. It spreads itself across networks without user interaction Correct answer.

    Explanation

    A worm is self-contained malware that propagates across hosts and networks on its own, exploiting reachable services or shared media without any user action. A virus, by contrast, needs a host file and some form of user execution to replicate. The defining test is therefore whether human interaction is required for propagation.

  151. Question 151Network security

    A technician downloads a firmware image and needs to confirm it is identical to the version the vendor released. Which action should the technician take?

    1. Encrypt the file with the vendor's public key before installing it
    2. Confirm the download was performed over an HTTPS connection
    3. Scan the file with the endpoint antivirus product before running it
    4. Compare the file's SHA-256 hash to the vendor's published value Correct answer.

    Explanation

    A cryptographic hash acts as a fixed-length fingerprint of a file's contents: any single-bit change produces a completely different digest, so matching the computed hash against the vendor's published value proves the file was not altered. Transport encryption and malware scanning answer different questions and cannot detect a modified but otherwise benign-looking image.

  152. Question 152Network security

    After a laptop is compromised, a security team wants every request to internal applications to be authenticated and authorized based on user identity and device health, regardless of where the request originates. Which approach best meets this requirement?

    1. Requiring users to rotate their passwords every 60 days
    2. Deploying identity-aware microsegmentation in a zero-trust model Correct answer.
    3. Placing all internal servers behind a stateful perimeter firewall
    4. Separating departments into VLANs with restricted trunk links

    Explanation

    Zero-trust design removes the assumption that being inside the network perimeter grants trust, and instead evaluates identity, device posture, and policy for each request to each resource. Microsegmentation enforces those per-flow decisions, which limits lateral movement from a compromised host. Perimeter firewalls and VLANs alone generally still permit internal host-to-host traffic once a device is on the inside.

  153. Question 153Network troubleshooting

    Users on a single workstation report that the NIC link indicator is dark and the operating system shows no network connection. Which OSI layer should be investigated first?

    1. Physical Correct answer.
    2. Network
    3. Data link
    4. Transport

    Explanation

    A dark link light means no electrical or optical signal exists between the NIC and the switch, which is a Layer 1 condition. The technician should check cabling, switch port status, and the NIC before moving up the stack.

  154. Question 154Network troubleshooting

    A technician has just terminated a new Cat 6 patch cable and needs to confirm that each pin on one connector maps correctly to the same pin on the other connector. Which tool is appropriate?

    1. Cable tester Correct answer.
    2. OTDR
    3. Protocol analyzer
    4. Tone generator

    Explanation

    A cable tester performs a wire-map check that verifies continuity and pin-to-pin mapping on copper cabling. It quickly identifies opens, shorts, and crossed pairs in a newly terminated cable.

  155. Question 155Network troubleshooting

    A Windows workstation reports an IPv4 address of 169.254.10.25. What does this address indicate?

    1. The DHCP server was not reachable Correct answer.
    2. A DNS server failure
    3. A successful DHCP lease renewal
    4. A static address assigned by the administrator

    Explanation

    The 169.254.0.0/16 range is the Automatic Private IP Addressing range, which a host self-assigns when it cannot obtain a lease from DHCP. The presence of such an address points to a DHCP reachability or configuration problem.

  156. Question 156Network troubleshooting

    Users on a switch port report slow throughput, and the switch counters show late collisions. Which configuration issue most commonly produces these symptoms?

    1. Duplex mismatch Correct answer.
    2. VLAN mismatch
    3. MTU mismatch
    4. DNS misconfiguration

    Explanation

    A duplex mismatch, such as one side set to full duplex and the other to half duplex, commonly produces late collisions and poor throughput. Both ends of a link should use the same duplex setting.

  157. Question 157Network troubleshooting

    A host can reach other devices on its local subnet but cannot reach any remote network. Its IP address and subnet mask are correct. Which setting should be verified first?

    1. DNS suffix
    2. Default gateway Correct answer.
    3. Duplex setting
    4. MAC address

    Explanation

    A host uses its default gateway to send traffic to destinations outside its local subnet. If local communication works but remote communication fails, the gateway address or reachability is the first logical check.

  158. Question 158Network troubleshooting

    A 2.4 GHz wireless access point serves an area near a break-room microwave. Users experience intermittent slowdowns whenever the microwave runs. Which action is most likely to improve performance?

    1. Shorten the Ethernet run to the AP
    2. Increase the AP transmit power
    3. Change the AP to a less congested channel Correct answer.
    4. Enable WPA3 encryption

    Explanation

    Microwave ovens emit radio-frequency energy in the 2.4 GHz band and can raise noise on nearby channels. Moving the AP to a less congested channel can improve the signal-to-noise ratio and reduce interference.

  159. Question 159Network troubleshooting

    Which command uses ICMP echo requests to test basic IP reachability to a host?

    1. netstat
    2. traceroute
    3. ping Correct answer.
    4. nslookup

    Explanation

    The ping utility sends ICMP echo requests and waits for echo replies, providing a basic test of IP reachability and round-trip time. It is commonly the first tool used to check connectivity to a specific address.

  160. Question 160Network troubleshooting

    What is the term for the gradual loss of signal strength as a signal travels over a copper cable?

    1. Latency
    2. Attenuation Correct answer.
    3. Crosstalk
    4. Electromagnetic interference

    Explanation

    Attenuation is the decrease in signal amplitude over distance and is a primary reason copper cable runs have length limits. It becomes more significant as cable length increases and signal frequency rises.

  161. Question 161Network troubleshooting

    A technician runs a traceroute to a web server. The first several hops respond, all later hops display asterisks, but the web site loads normally in a browser. What is the most likely explanation?

    1. The local DNS server is unreachable
    2. The client has an incorrect default gateway
    3. Intermediate devices are blocking ICMP TTL-expired replies Correct answer.
    4. The destination server is offline

    Explanation

    Traceroute relies on ICMP TTL-expired messages from intermediate routers; if those replies are filtered, hops appear as asterisks even though forwarded traffic still reaches the destination. The browser loading successfully confirms that end-to-end connectivity exists.

  162. Question 162Network troubleshooting

    Users can open a web site and load small pages, but large file downloads and some VPN connections stall. A ping test with the DF bit set succeeds for 1400-byte packets and fails for 1500-byte packets. What should the technician adjust?

    1. MTU or TCP MSS on the affected path Correct answer.
    2. DNS forwarders
    3. DHCP lease time
    4. Spanning Tree priority

    Explanation

    Successful small DF packets and failed larger DF packets indicate that the path cannot carry the assumed maximum packet size. Reducing the interface MTU or clamping TCP MSS prevents large packets from being silently dropped along the path.

  163. Question 163Network troubleshooting

    Clients on a subnet occasionally receive APIPA addresses during peak hours. The DHCP server is online, and the scope has no free leases. What is the best remediation?

    1. Restart the DNS service
    2. Extend or add a DHCP scope Correct answer.
    3. Change the wireless channel
    4. Disable the default gateway on clients

    Explanation

    Scope exhaustion occurs when all available addresses in a DHCP pool are leased, so additional clients self-assign APIPA addresses. Expanding the address pool or adding another scope restores available leases.

  164. Question 164Network troubleshooting

    Users can reach a server by IP address but cannot reach it by hostname. Other hosts resolve the name correctly. Which configuration on the affected workstation should be checked?

    1. Default gateway
    2. Duplex setting
    3. Preferred DNS server address Correct answer.
    4. Subnet mask

    Explanation

    Successful access by IP address indicates that routing and basic connectivity are working, while failure by hostname points to name resolution. The workstation's configured DNS server address is the first item to verify.

  165. Question 165Network troubleshooting

    A network experiences a broadcast storm, high switch CPU utilization, and rapidly changing MAC address tables. Which is the most likely cause?

    1. A misconfigured DNS record
    2. Duplicate IP addresses
    3. An expired DHCP lease
    4. A Layer 2 switching loop Correct answer.

    Explanation

    A Layer 2 loop causes broadcasts and unknown unicast frames to circulate repeatedly, producing broadcast storms and unstable MAC address tables. Spanning Tree Protocol is designed to prevent this by blocking redundant paths.

  166. Question 166Network troubleshooting

    Users walking between floors with laptops lose connectivity briefly even though each floor has an access point using the same SSID. Which change is most likely to improve roaming?

    1. Enable MAC filtering
    2. Assign different SSIDs per floor
    3. Disable SSID broadcast
    4. Adjust AP power and cell overlap Correct answer.

    Explanation

    Roaming works best when adjacent access points provide overlapping coverage with suitable signal strength so the client can move without a coverage gap. Tuning transmit power and cell overlap improves that transition.

  167. Question 167Network troubleshooting

    Two hosts are connected to the same switch and configured with addresses in the same subnet, but they cannot ping each other. Their switch ports are assigned to different VLANs. What is the most likely explanation?

    1. The DNS servers are misconfigured
    2. The switch is in Layer 3 mode
    3. The hosts have duplicate MAC addresses
    4. Layer 2 isolation between VLANs Correct answer.

    Explanation

    VLANs create separate Layer 2 broadcast domains, so ports in different VLANs cannot exchange frames directly even when the hosts use the same IP subnet. Communication between VLANs requires a Layer 3 device or inter-VLAN routing.

  168. Question 168Network troubleshooting

    Users report intermittent connectivity to a server. The ARP table on a client alternates between two different MAC addresses for the server's IP address. What is the most likely cause?

    1. An expired DHCP lease
    2. A duplex mismatch
    3. A failing DNS zone
    4. An IP address conflict Correct answer.

    Explanation

    ARP maps an IP address to a MAC address, so two different MAC addresses claiming the same IP address indicate a duplicate or conflicting IP assignment. This produces intermittent connectivity as the client's ARP entry changes.

  169. Question 169Network troubleshooting

    Which tool is designed to capture and decode network frames for protocol analysis?

    1. Protocol analyzer Correct answer.
    2. Tone generator
    3. Cable certifier
    4. Loopback plug

    Explanation

    A protocol analyzer, also called a packet sniffer, captures frames from the network and decodes protocol headers and payloads for troubleshooting. It is used to inspect retransmissions, malformed frames, and application behavior.

  170. Question 170Network troubleshooting

    Which tool is used to locate a break or high-loss splice in a fiber-optic cable by measuring reflected light?

    1. Cable tester
    2. OTDR Correct answer.
    3. Multimeter
    4. Tone generator

    Explanation

    An optical time-domain reflectometer sends light pulses into a fiber and measures reflections to locate breaks, splices, and high-loss points along the run. It is the standard tool for fiber fault location and characterization.

  171. Question 171Network troubleshooting

    Which metric describes the variation in packet arrival delay that can cause choppy VoIP audio?

    1. Bandwidth
    2. Latency
    3. Jitter Correct answer.
    4. Throughput

    Explanation

    Jitter is the variation in delay between packet arrivals, which can cause real-time traffic such as VoIP to sound choppy when packets arrive unevenly. A jitter buffer can compensate for some variation but cannot fix excessive delay spikes.

  172. Question 172Network troubleshooting

    A router has two routes to a destination: 10.1.0.0/16 via next hop A and 10.1.1.0/24 via next hop B. A packet is addressed to 10.1.1.50. Which route will the router use?

    1. The route with the lower administrative distance
    2. The 10.1.0.0/16 route via A
    3. Both routes equally
    4. The 10.1.1.0/24 route via B Correct answer.

    Explanation

    Routers use longest-prefix match first, so the more specific /24 route is selected over the covering /16 route for an address inside both. Administrative distance is considered only among routes to the same prefix.

  173. Question 173Network troubleshooting

    A firewall between two subnets drops return traffic for connections that clients initiate successfully. The return packets arrive on a different interface than the one the request left from. What is the most likely cause?

    1. An expired DHCP lease
    2. A duplex mismatch
    3. A DNS resolution failure
    4. Asymmetric routing Correct answer.

    Explanation

    Asymmetric routing occurs when forward and return traffic take different paths, so a stateful firewall may see return packets on an interface that does not match the session state and drop them. The fix is to make routing symmetric or adjust firewall handling.

  174. Question 174Network troubleshooting

    An IP camera reboots whenever a second camera is connected to the same PoE switch. The switch's total power budget is nearly consumed. What is the most likely cause?

    1. The switch port is set to half duplex
    2. The camera has a duplicate IP address
    3. The PoE power budget is exceeded Correct answer.
    4. The DNS server is unreachable

    Explanation

    PoE switches have a finite total power budget, and adding a device can exceed that budget, causing ports or devices to power-cycle. The technician should verify the switch budget and per-port power allocation before adding more powered devices.

  175. Question 175Network troubleshooting

    A wireless client shows a strong signal level but experiences frequent retransmissions and low throughput. A spectrum analyzer shows high noise near the AP. Which action best addresses the problem?

    1. Increase the AP's transmit power
    2. Reduce interference to improve the signal-to-noise ratio Correct answer.
    3. Disable DHCP on the wireless LAN
    4. Change the client's IP address

    Explanation

    A strong signal with high noise means the signal-to-noise ratio is poor, which leads to retransmissions and reduced throughput. Reducing interference, such as by changing channels or relocating the AP, improves SNR more effectively than increasing power alone.

  176. Question 176Network troubleshooting

    A cable certifier reports excessive near-end crosstalk on a newly installed Cat 6 run. Which condition is most likely to cause this?

    1. A run that exceeds 100 meters
    2. A missing default gateway
    3. A bend radius that is too tight
    4. Untwisted conductors at the termination Correct answer.

    Explanation

    Near-end crosstalk occurs when signal from one pair couples into another, and untwisted conductors near a connector or termination increase that coupling. Maintaining pair twists up to the termination point is important for controlling crosstalk.

  177. Question 177Network troubleshooting

    A packet capture shows numerous TCP retransmissions and duplicate ACKs on a WAN link, while average ping latency is low. Which condition best explains the reduced throughput?

    1. A VLAN mismatch on the access switch
    2. An incorrect subnet mask
    3. A DNS TTL that is set too high
    4. Packet loss causing congestion-window reduction Correct answer.

    Explanation

    Packet loss triggers TCP retransmissions and causes the sender to reduce its congestion window, lowering effective throughput even when average latency appears normal. Duplicate ACKs are a common signal of missing segments on the path.

  178. Question 178Network troubleshooting

    A technician must identify which port on a 48-port patch panel a specific office wall jack terminates on. Which tool should the technician use?

    1. A toner and probe Correct answer.
    2. A protocol analyzer
    3. An optical time-domain reflectometer
    4. A cable certifier

    Explanation

    A tone generator is connected to the cable at one end and injects an audible signal, and the inductive probe then traces that signal along the cable to the matching jack or panel port. This makes the pair the standard tool for locating an unlabeled cable among many.

  179. Question 179Network troubleshooting

    A Windows workstation was moved to a new subnet and now holds an address from its old subnet. Which command sequence forces the client to obtain a new address from DHCP?

    1. ipconfig /release then /renew Correct answer.
    2. ipconfig /flushdns
    3. netsh interface ipv4 show config
    4. route print

    Explanation

    The release command returns the current lease to the DHCP server, and the renew command then requests a fresh lease from the server serving the new subnet. Running them in sequence is the standard way to correct a stale lease after a move.

  180. Question 180Network troubleshooting

    A host can ping other hosts on its own subnet but cannot reach any host on the internet. Its configuration shows a valid IP address and subnet mask but no default gateway. Which cause fits this symptom?

    1. A default gateway is missing Correct answer.
    2. The subnet mask is incorrect
    3. The DNS server is unreachable
    4. The NIC is running at half duplex

    Explanation

    Traffic destined outside the local subnet must be handed to a router, and the host learns that router from the default gateway setting. Without one, the host cannot forward any off-subnet traffic even though local communication works.

  181. Question 181Network troubleshooting

    Which interface counter most directly indicates that frames were corrupted while crossing a copper Ethernet link?

    1. CRC/FCS error count Correct answer.
    2. Late collision counter
    3. Queue drop count
    4. Configured MTU

    Explanation

    CRC and FCS errors increment when the frame check sequence calculated at the receiver does not match the value in the frame, meaning the bits changed in transit. Common causes are damaged cabling, interference, or a duplex problem.

  182. Question 182Network troubleshooting

    Which utility lets a technician manually query a DNS server and inspect the records it returns for a hostname?

    1. nslookup Correct answer.
    2. telnet
    3. tracert
    4. netstat

    Explanation

    This tool sends a query directly to a DNS server and displays the answer records along with the server that responded, which makes it useful for verifying what a name server actually returns. The Linux equivalent is dig.

  183. Question 183Network troubleshooting

    A workstation's NIC link light and the matching switch port light are both off. Which OSI layer should be investigated first?

    1. Physical layer Correct answer.
    2. Transport layer
    3. Application layer
    4. Network layer

    Explanation

    Link lights reflect electrical signaling on the medium, which is layer 1. If no link is established, no higher-layer protocol can function, so the physical layer is checked first.

  184. Question 184Network troubleshooting

    Which command displays the ARP cache on a Windows workstation, showing IP-to-MAC mappings the host has learned?

    1. nslookup
    2. route print
    3. netstat -s
    4. arp -a Correct answer.

    Explanation

    The address resolution cache maps IPv4 addresses to MAC addresses for hosts on the local link, and this command lists those entries. Inspecting it helps confirm whether a host resolved the right hardware address.

  185. Question 185Network troubleshooting

    A copper cable run has failed, and the technician needs to know the distance to the break. Which tool sends a pulse down the cable and times the reflection to calculate that distance?

    1. Time-domain reflectometer Correct answer.
    2. Digital multimeter
    3. Optical power meter
    4. Cable certifier with wire-map report

    Explanation

    A time-domain reflectometer injects a pulse and measures how long its reflection takes to return, which yields the distance to an open or short on copper cabling. The same principle applied to light is used on fiber.

  186. Question 186Network troubleshooting

    Two 2.4 GHz access points are set to channels 1 and 3 and are mounted close together. Clients report slow throughput. Which change best reduces interference?

    1. Raise transmit power on both access points
    2. Enable WPA3 on both APs
    3. Set both APs to channel 3
    4. Set the APs to channels 1 and 6 Correct answer.

    Explanation

    In the 2.4 GHz band the non-overlapping channels are 1, 6, and 11; channels 1 and 3 overlap and cause adjacent-channel interference. Separating the APs onto non-overlapping channels reduces contention.

  187. Question 187Network troubleshooting

    A technician suspects a routing loop between several routers. Which symptom best supports that conclusion?

    1. DNS queries to external servers time out
    2. Ping replies show steadily increasing latency
    3. The ARP cache contains several duplicate entries
    4. Traceroute hops repeat and report TTL exceeded Correct answer.

    Explanation

    A packet caught in a loop is forwarded repeatedly while its TTL decrements until a router discards it and returns an ICMP time-exceeded message. A traceroute therefore shows the same routers appearing over and over.

  188. Question 188Network troubleshooting

    A switch port shut down automatically after the workstation MAC address learned on that port changed repeatedly. Which feature caused the shutdown?

    1. Storm control
    2. Port security Correct answer.
    3. BPDU guard
    4. DHCP snooping

    Explanation

    Port security limits which and how many MAC addresses may appear on a port and can place the port in an err-disabled state on a violation. Repeatedly changing source MACs exceeds that limit or triggers the violation action.

  189. Question 189Network troubleshooting

    A newly installed Cat 6 run between two offices is 140 meters long. Users report intermittent errors and low throughput. Which is the most likely cause?

    1. A duplex mismatch between switch and host
    2. Electromagnetic interference from nearby equipment
    3. An incorrect VLAN assignment on the port
    4. The cable run exceeds the maximum length Correct answer.

    Explanation

    Twisted-pair Ethernet specifies a maximum channel length of 100 meters; beyond that, attenuation and noise cause CRC errors and retransmissions that reduce throughput. The described length is a clear violation of the standard.

  190. Question 190Network troubleshooting

    Wireless clients authenticate to a corporate SSID through a RADIUS server using EAP-TLS. After the server's certificate expires, which symptom appears?

    1. Clients cannot authenticate to the SSID Correct answer.
    2. Clients associate at reduced data rates
    3. Clients roam repeatedly between access points
    4. Clients associate but receive APIPA addresses

    Explanation

    EAP-TLS requires the client to validate the authentication server's certificate as part of the TLS handshake. An expired certificate fails that validation, so the 802.1X exchange never completes and the client is denied access.

  191. Question 191Network troubleshooting

    An administrator moves a web server to a new public IP address and updates the DNS zone. External users still reach the old IP address. What is the most likely cause?

    1. The firewall is blocking HTTPS
    2. Resolvers cache the old address until the TTL expires Correct answer.
    3. The web server's default gateway is configured incorrectly
    4. The server's subnet mask is incorrect

    Explanation

    DNS answers are cached by resolvers for the duration of the record's TTL, so they continue returning the previous address until that timer expires. Lowering the TTL before a planned move reduces this window.

  192. Question 192Network troubleshooting

    VoIP calls sound choppy while large file transfers run on the same WAN link. Average latency is low but jitter is high. Which action best fixes this?

    1. Disable DHCP on the voice VLAN
    2. Configure QoS to prioritize voice traffic Correct answer.
    3. Replace all Cat 5e cabling with Cat 6 cabling
    4. Increase the MTU on the WAN link

    Explanation

    Jitter occurs when voice packets queue behind bursts of bulk data, so their arrival spacing varies. Marking voice with a high-priority class and giving it priority queuing keeps delay variation within acceptable limits.

  193. Question 193Network troubleshooting

    Clients on a remote subnet receive APIPA addresses. The DHCP server sits on another subnet and works correctly for other subnets, and the router interface facing the clients has no IP helper address configured. Which is the cause?

    1. The DHCP scope is exhausted
    2. The DHCP server's lease time is set too short
    3. The clients are configured with static addresses
    4. No DHCP relay is configured on the router Correct answer.

    Explanation

    DHCP discovery messages are broadcasts and do not cross routers, so a relay or helper address must forward them to the server. Without that configuration the server never sees the request and the clients fall back to link-local addressing.

  194. Question 194Network troubleshooting

    A packet capture on a client shows repeated SYN packets to a server with no SYN-ACK returned, while other clients connect to the same server successfully. Which is the most likely cause?

    1. The client NIC is running at half duplex
    2. The server's DNS record is stale
    3. The client's default gateway is wrong
    4. A firewall is blocking the port Correct answer.

    Explanation

    A SYN with no response means the connection attempt or its reply is being filtered somewhere along the path. Since other clients reach the same server, a rule blocking the destination port for this client is the likely culprit.

  195. Question 195Network troubleshooting

    A technician applies a fix, confirms that the user's problem is resolved, and closes the ticket. Which step of the troubleshooting methodology was skipped?

    1. Document findings, actions, and outcomes Correct answer.
    2. Establish a theory of probable cause
    3. Identify the problem
    4. Test the theory to determine the cause

    Explanation

    The methodology ends with recording what was found, what was changed, and the result, which builds a knowledge base for future incidents. Closing the ticket without that record skips the final step.

  196. Question 196Network troubleshooting

    A packet capture shows a server advertising a TCP receive window of zero while the client keeps sending window probes. What does this indicate?

    1. The receiving application is not draining its socket buffer Correct answer.
    2. Packets are being dropped by a congested link
    3. The sender's MTU is larger than the path MTU along the route
    4. The receiver is running a different TCP version

    Explanation

    A zero window tells the sender that the receiver's buffer is full and no more data can be accepted until the application reads what is already queued. The probes check for the moment the window reopens.

  197. Question 197Network troubleshooting

    In an open office, a laptop stays associated with a distant access point on the same channel instead of a nearby one, giving poor throughput. Which term and remedy fit this situation?

    1. Hidden node; enable RTS/CTS on the APs
    2. Co-channel interference; change the channel plan
    3. Near/far problem; increase antenna gain
    4. Sticky client; tune roaming thresholds Correct answer.

    Explanation

    A client that remains on its current access point well past the point where a better one is available is described as sticky. Adjusting RSSI roaming thresholds or reducing AP power encourages it to reassociate with the closer AP.

  198. Question 198Network troubleshooting

    Host A (10.1.1.10/24) can ping Host B (10.1.1.200/25), but Host B cannot ping Host A. Both are on the same switch and no router is involved. Which is the most likely cause?

    1. Host B's subnet mask treats A as remote Correct answer.
    2. Host A has a duplicate IP address
    3. ARP is disabled on Host A
    4. The switch port for B is assigned to the wrong VLAN

    Explanation

    With a /25 mask, Host B's range ends at 10.1.1.255 and begins at 10.1.1.128, so it considers 10.1.1.10 to be off-subnet and sends replies to a gateway that does not exist. Host A's /24 mask lets it reach B directly, producing one-way failure.

  199. Question 199Network troubleshooting

    IPv6 hosts on a VLAN have valid global addresses and can reach each other, but they cannot reach remote networks. Which is the most likely cause?

    1. The hosts received APIPA addresses
    2. Duplicate IPv6 addresses exist on the VLAN
    3. Router advertisements are blocked Correct answer.
    4. The DNS server address is incorrect

    Explanation

    IPv6 hosts learn their default router from router advertisements, or from DHCPv6 when configured that way. If advertisements are filtered, hosts keep working addresses and on-link connectivity but have no default route off the VLAN.

  200. Question 200Network troubleshooting

    A fiber link between two buildings shows high attenuation. The technician cleans both connectors and re-tests, but loss remains above the accepted level. Which is the most likely cause?

    1. The transceivers are configured for half duplex
    2. The switch port is err-disabled
    3. The cable is Cat 6a rather than fiber
    4. A tight bend or damaged splice exists along the run Correct answer.

    Explanation

    Once connector contamination is ruled out, excessive loss usually comes from the fiber itself: macrobending, a poor splice, or physical damage. An OTDR can pinpoint the location of the loss along the run.

CompTIA Network+ flashcards

32 cards. Read the term and the definition here. The deck at the top of this page is optional.

OSI Layer 3
Network layer; routes packets between networks using logical IP addresses. Routers operate here, and IP, ICMP, and routing protocols function at this layer.
TCP three-way handshake
Connection setup sequence: client sends SYN, server replies SYN-ACK, client sends ACK. It synchronizes sequence numbers before data transfer begins.
APIPA address range
169.254.0.0/16; a host self-assigns this link-local address when DHCP is unavailable. It cannot route beyond the local subnet.
Private IPv4 ranges
10.0.0.0/8, 172.16.0.0/12, and 192.168.0.0/16 are non-routable on the internet and require NAT for external communication.
DNS MX record
Mail exchanger record; identifies the mail server responsible for accepting email for a domain, with a preference value for prioritization.
IPv6 link-local prefix
fe80::/10; automatically configured on every IPv6 interface for communication on the local link only and never forwarded by routers.
Usable hosts formula
For a subnet with h host bits, usable host addresses equal 2^h minus 2, subtracting the network and broadcast addresses.
Cat6a maximum distance
Cat6a supports 10 Gbps Ethernet up to 100 meters on copper cabling and has stricter shielding to reduce crosstalk than Cat6.
DHCP DORA process
Discover, Offer, Request, Acknowledge. Client broadcasts Discover, server Offers an address, client Requests it, server Acknowledges the lease.
802.1Q VLAN tag
A 4-byte tag inserted into Ethernet frames that carries a 12-bit VLAN ID, allowing trunk links to carry multiple VLANs.
STP purpose
Spanning Tree Protocol blocks redundant switch paths to prevent Layer 2 loops and broadcast storms while maintaining a loop-free topology.
Wi-Fi 6 standard
IEEE 802.11ax; operates in 2.4 GHz and 5 GHz bands, improves efficiency in dense environments using OFDMA and MU-MIMO.
NAT overload
Also called PAT; maps many private IP addresses to one public IP address using different source port numbers.
SD-WAN characteristic
Software-defined WAN centrally manages and prioritizes traffic across multiple WAN links such as broadband, MPLS, and cellular.
SNMP traps
Unsolicited notifications sent by an SNMP agent to a manager on UDP port 162 when a defined event occurs.
RTO vs RPO
Recovery time objective is maximum acceptable downtime; recovery point objective is maximum acceptable data loss measured in time.
3-2-1 backup rule
Keep three copies of data, on two different media types, with one copy stored offsite or offline.
Syslog default port
UDP 514; syslog messages carry severity levels from 0 emergency through 7 debug for centralized logging.
Full backup
Copies all selected data every time, allowing simplest restoration but requiring the most storage and backup time.
Incremental backup
Copies only data changed since the last backup of any type; restoration requires the last full backup plus every incremental since.
CIA triad
Confidentiality protects data from unauthorized disclosure, integrity prevents unauthorized modification, and availability ensures timely access to resources.
RADIUS port numbers
UDP 1812 for authentication and authorization, UDP 1813 for accounting; commonly used for centralized AAA for network access.
TACACS+ protocol
Cisco-developed AAA protocol that uses TCP port 49 and separates authentication, authorization, and accounting functions.
Stateful firewall
Tracks active connections in a state table and permits return traffic that matches an established session.
IDS vs IPS
An IDS detects and alerts on suspicious traffic; an IPS sits inline and can block or drop malicious traffic.
IPsec ESP
Encapsulating Security Payload provides confidentiality and integrity by encrypting packet payloads; AH provides integrity but no encryption.
802.1X
Port-based network access control that authenticates devices through a supplicant, authenticator, and authentication server before allowing LAN access.
APIPA indicates
A 169.254.x.x address on a host usually means the DHCP server was unreachable or failed to respond.
Traceroute purpose
Maps the path packets take to a destination and shows per-hop latency, helping locate routing loops or failed links.
DNS troubleshooting command
nslookup or dig queries DNS servers directly to verify name resolution and record values independent of local browser cache.
Duplex mismatch symptom
Late collisions and poor throughput occur when one side is full duplex and the other half duplex on the same link.
Jitter
Variation in packet delay over time; high jitter degrades real-time voice and video even when average latency is acceptable.

CompTIA Network+ study guide

Networking Concepts: Models, Ports, and Addressing

Layered models

Know the OSI layers in order - Physical, Data Link, Network, Transport, Session, Presentation, Application - and map devices and protocol data units to them. Switches and MAC addresses live at Layer 2; routers and IP packets at Layer 3; TCP/UDP ports and segments at Layer 4. The TCP/IP model compresses this into link, internet, transport, and application, so a question may ask for the OSI equivalent of a TCP/IP layer.

Ports and protocols

Memorize service ports cold: SSH 22, Telnet 23, SMTP 25, DNS 53, DHCP 67/68, HTTP 80, HTTPS 443, LDAP 389 (636 for LDAPS), SMB 445, RDP 3389, SNMP 161 with traps on 162. DNS uses UDP for ordinary queries and TCP for large responses and zone transfers.

Addressing

IPv4 private ranges are 10.0.0.0/8, 172.16.0.0/12, and 192.168.0.0/16; 127.0.0.0/8 is loopback and 169.254.0.0/16 is link-local (APIPA). In any subnet the all-zeros host is the network address and the all-ones host is broadcast. IPv6 is 128 bits, has no broadcast (multicast replaces it), and uses fe80::/10 for link-local.

Traps

Questions often ask for usable hosts rather than total addresses, or present an OSI layer for a function that spans layers - TLS, for example, is usually described at the transport/session boundary. A multilayer switch routes at Layer 3, so "switch = Layer 2 only" is not always safe.

Rule of thumb

For IPv4, usable hosts = 2^(32 − prefix) − 2, except /31 point-to-point links (2 usable) and /32 host routes. Establish the block size first, then count network and broadcast as unusable.

Network Implementation: Routing, Switching, Wireless, and Physical Plant

Routing

Distinguish static routes from dynamic protocols. Distance-vector protocols choose by hop count or composite metric, while link-state protocols build a topology database and run shortest-path calculations; BGP carries routes between autonomous systems. Administrative distance decides between sources when multiple routes to the same prefix exist.

Switching

Access ports belong to one VLAN; trunk ports carry many VLANs with 802.1Q tags. Spanning Tree prevents Layer 2 loops by blocking redundant links, and RSTP converges faster. Link aggregation (EtherChannel/LACP) adds bandwidth and redundancy. Port mirroring feeds monitoring tools.

Wireless

Know the 802.11 family at a high level, the difference between 2.4, 5, and 6 GHz, and why 2.4 GHz channels 1, 6, and 11 are the non-overlapping set. WPA2 and WPA3 protect the air link; SSIDs identify networks and BSSIDs identify radios. Survey for coverage and interference before deployment.

Physical and services

Copper categories differ in supported distance and speed; single-mode fiber goes farther than multimode. Power over Ethernet has power budgets that must be checked per switch. NAT/PAT translates addresses at a boundary, and DHCP relay forwards requests across subnets.

Traps

A host in one VLAN that cannot reach a DHCP server in another usually needs an L3 gateway or router-on-a-stick, the VLAN allowed on the trunk, and a DHCP relay address. A native VLAN mismatch or a trunk missing the VLAN produces exactly this symptom. Wireless questions often mislead with channel width rather than channel overlap.

Worked example

Users in VLAN 10 cannot get addresses from a server in VLAN 20. Verify the SVI or subinterface for VLAN 10 exists, the trunk allows both VLANs, and the gateway interface carries ip helper-address pointing to the server. Test with a static address first to separate DHCP failure from routing failure.

Network Operations: Monitoring, Documentation, and Continuity

Monitoring and telemetry

SNMP polls agents on UDP 161 and receives traps on 162; MIBs define the object tree and OIDs identify individual values. Syslog on UDP 514 centralizes event messages with severity levels from 0 (emergency) to 7 (debug). Flow tools such as NetFlow, sFlow, and IPFIX summarize who talked to whom, while packet capture records the actual bytes. Establish baselines so anomalies are measurable.

Documentation and change control

Maintain physical and logical diagrams, an IP addressing schema, rack elevations, and cable labeling. Every change should have a record, a rollback plan, and an approval path. Configuration management means versioned golden configurations and controlled patching.

Continuity and recovery

Recovery objectives drive design. RTO is how long a service may be down; RPO is how much data may be lost, measured backward from the failure. Backups may be full, incremental, or differential, and restore chains differ. Cold, warm, and hot sites trade cost against recovery speed. Test plans with tabletop exercises, and track SLA metrics such as MTTR and MTBF.

Traps

Questions frequently swap RTO and RPO. Remember that a differential backup needs only the last full plus the latest differential, while incremental restores require every increment in sequence. NetFlow is metadata, not full packet capture. SNMP traps are pushed; polling is pulled. Syslog severity numbers run opposite to intuition: lower numbers are more severe.

Rule of thumb

Ask "how fast must we be back?" for RTO and "how much data can we lose?" for RPO. If the scenario describes acceptable data loss in minutes, that number is the RPO, no matter how the question phrases downtime.

Network Security: Threats, Controls, and Secure Access

Frameworks and threats

Anchor decisions in confidentiality, integrity, and availability. Threat actors range from insiders to organized crime, and social engineering remains effective: phishing by email, vishing by phone, smishing by text, plus tailgating and shoulder surfing. Technical attacks include DoS/DDoS, on-path interception, spoofing, ARP and DNS poisoning, VLAN hopping, evil twin access points, deauthentication floods, and credential stuffing.

Controls and hardening

Apply least privilege and role-based access, require multifactor authentication, and segment networks so a compromise stays contained. Disable unused ports and services, change defaults, and patch. Port security, DHCP snooping, and dynamic ARP inspection defend Layer 2. 802.1X provides port-based access control with a supplicant, authenticator, and authentication server. NAC checks device posture before admission.

Defensive devices

A stateful firewall tracks connections; an IDS detects and alerts; an IPS can block inline. A WAF protects web applications specifically. Zero trust removes implicit trust based on network location, and SASE combines cloud-delivered security with wide-area connectivity.

Encryption and wireless

Symmetric encryption is fast and used for bulk data; asymmetric keys solve key exchange and signatures. IPsec uses AH for integrity and ESP for confidentiality. WPA3 adds SAE and protected management frames, which mitigate deauthentication attacks.

Traps

Encryption alone does not authenticate a peer. Deauthentication frames are management frames, so protected management frames matter. An evil twin is a rogue AP using a legitimate SSID, not merely an unsecured network. An IDS does not stop traffic by default.

Rule of thumb

When credentials are suspected compromised, the first response is to revoke sessions and enforce MFA, then reset the password - not simply to change the password and hope the session dies.

Network Troubleshooting: Method and Tools

Method

Work a consistent loop: identify the problem and gather information, establish a theory, test it, plan and implement a fix, verify full functionality, and document. Choose a direction - top-down from the application, bottom-up from the physical layer, or divide-and-conquer from the middle. Change one variable at a time so results stay interpretable.

Tools

Ping tests reachability and round-trip time. Traceroute reveals the path and where it stops. ipconfig, ifconfig, or ip show addressing, and nslookup or dig query DNS directly. arp exposes the local resolution table. netstat or ss shows listening ports and connections. Wireshark or tcpdump captures packets, while a cable tester, toner probe, and OTDR cover copper and fiber plant. A Wi-Fi analyzer reveals channel overlap, RSSI, and SNR.

Symptom patterns

A 169.254 address means DHCP was unreachable - check VLAN, trunk, relay, and scope exhaustion. If IP pings work but names fail, suspect DNS. If the gateway answers but remote hosts do not, suspect routing, NAT, or a firewall. Intermittent performance can be latency, jitter, or loss; test each separately. Duplicate IP addresses, subnet mask mismatches, and wrong default gateways produce partial connectivity that looks like random failure.

Traps

Questions blur "cannot reach the internet" with "DNS is broken." Test by pinging a public IP, then a name. High latency is not the same as high jitter, and neither is packet loss. A link light does not guarantee correct duplex or VLAN assignment.

Worked example

A user receives 169.254.x.x. Confirm the physical link, then the access VLAN, then that the trunk allows it, then the relay address, and finally the DHCP scope. If a static address works, the fault is DHCP delivery rather than routing.

Rule of thumb

If pinging the default gateway fails, stop investigating DNS and applications - the problem is local or Layer 2/3.

CompTIA Network+ cheat sheet

Quick reference

Networking Concepts

  • OSI layers: 1 Physical (bits), 2 Data Link (frames, MAC), 3 Network (packets, IP), 4 Transport (segments, TCP/UDP), 5 Session, 6 Presentation, 7 Application.

  • TCP is connection-oriented and uses SYN, SYN-ACK, ACK; UDP is connectionless with no delivery guarantee.

  • Common ports: 22 SSH, 23 Telnet, 25 SMTP, 53 DNS, 80 HTTP, 443 HTTPS, 67/68 DHCP, 161/162 SNMP, 3389 RDP.

  • Private IPv4: 10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16; APIPA: 169.254.0.0/16; loopback: 127.0.0.0/8.

  • Usable hosts per subnet = 2^h - 2, where h is the number of host bits; number of subnets = 2^n, where n is borrowed bits.

  • IPv6 is 128 bits; no broadcast; link-local fe80::/10; loopback ::1; multicast ff00::/8.

  • DNS records: A (IPv4), AAAA (IPv6), CNAME (alias), MX (mail), TXT (text/policy), PTR (reverse), NS (name server).

  • Cloud service models: IaaS provides infrastructure, PaaS provides development platform, SaaS provides applications.

  • Star topology uses a central switch; mesh provides redundant paths; hub-and-spoke centralizes traffic through a hub site.

Quick reference

Network Implementation

  • Cat5e supports 1 Gbps to 100 m; Cat6 supports 10 Gbps to 55 m; Cat6a supports 10 Gbps to 100 m.

  • Fiber: single-mode (SMF) has a small core and long reach; multimode (MMF) has a larger core and shorter reach.

  • DHCP DORA: Discover, Offer, Request, Acknowledge.

  • VLANs divide a switch into separate broadcast domains; 802.1Q trunk tags carry multiple VLANs between switches.

  • STP/RSTP prevents Layer 2 loops by blocking redundant paths; RSTP converges faster than STP.

  • 802.11 standards: a 5 GHz 54 Mbps, b 2.4 GHz 11 Mbps, g 2.4 GHz 54 Mbps, n 2.4/5 GHz MIMO, ac 5 GHz, ax Wi-Fi 6.

  • NAT translates private to public addresses; PAT/overload uses source ports to share one public IP.

  • Routing: OSPF is link-state, BGP is path-vector for internet routes, EIGRP is advanced distance-vector.

  • SDN separates the control plane from the data plane; SD-WAN manages multiple WAN links centrally.

Quick reference

Network Operations

  • SNMP uses UDP 161 for queries and UDP 162 for traps; syslog commonly uses UDP 514.

  • RTO is maximum acceptable downtime; RPO is maximum acceptable data loss.

  • 3-2-1 backup: 3 copies, 2 media types, 1 offsite or offline.

  • Full backup copies all data; incremental copies changes since last backup of any type; differential copies changes since last full.

  • Restore chain: full + all incrementals since that full, or full + latest differential.

  • Monitoring metrics: latency, jitter, packet loss, bandwidth, throughput, utilization, and error rate.

  • Documentation set includes network diagrams, IP address management, asset inventory, baselines, and change records.

  • Configuration management uses versioned golden configurations and rollback plans.

  • Patch management cycles: identify, test, approve, deploy, verify.

Quick reference

Network Security

  • CIA triad: confidentiality, integrity, availability.

  • AAA: authentication verifies identity, authorization grants permissions, accounting logs activity.

  • RADIUS uses UDP 1812/1813; TACACS+ uses TCP 49 and separates AAA functions.

  • Symmetric encryption (AES) uses one shared key; asymmetric encryption (RSA/ECC) uses a public/private key pair.

  • Stateful firewalls track connections; stateless firewalls filter per packet; WAF protects web applications.

  • IDS detects and alerts; IPS is inline and can block.

  • IPsec: AH provides integrity/authentication without encryption; ESP provides confidentiality and integrity.

  • 802.1X uses supplicant, authenticator, and authentication server for port-based access control.

  • Common attacks: DoS/DDoS, MITM/on-path, spoofing, phishing, ARP poisoning, VLAN hopping.

Quick reference

Network Troubleshooting

  • Troubleshooting sequence: identify problem, establish theory, test theory, plan action, implement, verify, document.

  • 169.254.x.x indicates DHCP failure; 0.0.0.0 or no address indicates link/configuration issue.

  • Ping tests ICMP reachability; traceroute/tracert maps path and per-hop latency.

  • nslookup/dig query DNS directly; ipconfig /flushdns clears local DNS cache.

  • ipconfig/ifconfig shows IP, mask, gateway; netstat shows connections/listening ports; arp shows IP-to-MAC mappings.

  • Duplex mismatch causes late collisions and poor throughput; verify both ends match full/half duplex.

  • Wireless issues: interference, channel overlap, low SNR, roaming misconfiguration, and wrong security settings.

  • High jitter and packet loss degrade VoIP/video more than average latency alone.

  • Escalate with documented symptoms, tests performed, and recent changes; use change control for fixes.

CompTIA Network+ key terms

OSI model

A seven-layer reference model describing how data travels from an application on one device to an application on another, with each layer handling a distinct job such as framing, addressing, routing, or delivery.

Related: Encapsulation
Encapsulation

The process of wrapping data with protocol headers as it moves down a network stack, so each layer receives the information it needs to deliver and decode the payload correctly.

Related: OSI model
Subnet mask

A 32-bit value that tells a host which portion of an IPv4 address identifies the network and which portion identifies the host, letting devices decide whether traffic is local or must be routed.

Related: CIDR notation, Default gateway
CIDR notation

A shorthand for writing an IP network using a slash and a prefix length, such as /24, where the number states how many leading bits belong to the network portion of the address.

Related: Subnet mask
VLAN

A logical grouping of switch ports or devices that behaves like its own separate network, keeping broadcast traffic contained without requiring dedicated physical hardware for each group.

Related: Broadcast domain, Managed switch
Default gateway

The router address a host sends traffic to when the destination is not on the local subnet; without a correct gateway, a device reaches local peers but nothing beyond them.

Related: Subnet mask, Traceroute
NAT

A technique that rewrites IP addresses in packet headers as traffic crosses a router, letting many private hosts share one public address and hiding internal addressing from outside networks.

Related: Default gateway
DNS

A hierarchical, distributed naming system that translates human-readable host names into IP addresses so clients can locate servers without knowing their numeric addresses in advance.

DHCP

A protocol that automatically supplies clients with an IP address, subnet mask, default gateway, and DNS servers from a pool, removing the need to configure each device by hand.

Related: DNS, Default gateway
ARP

A protocol used on IPv4 local networks to map a known IP address to the hardware MAC address of the device that owns it, so frames can be delivered on the segment.

Related: Broadcast domain
Broadcast domain

Every device that receives a frame sent to the broadcast address of a network segment; routers and VLANs create boundaries that stop broadcasts from spreading further.

Related: VLAN, ARP
Managed switch

A network switch that administrators can configure and monitor, offering features such as VLANs, port mirroring, link aggregation, and spanning tree control that unmanaged switches lack.

Related: VLAN, Spanning Tree Protocol (STP)
Spanning Tree Protocol (STP)

A Layer 2 protocol that prevents switching loops by electing a root bridge and blocking redundant paths, keeping a loop-free topology that can still fail over when a link drops.

Related: Managed switch, Link aggregation (LACP)
Link aggregation (LACP)

An IEEE standard that lets two devices negotiate bundling several physical links into one logical link, adding bandwidth and redundancy while avoiding the forwarding problems of accidental loops.

Related: Spanning Tree Protocol (STP)
PoE

A feature that delivers both data and electrical power over a standard Ethernet cable, letting devices such as access points, cameras, and phones run without a separate power outlet.

Related: Wireless access point
Wireless access point

A device that bridges wireless clients onto a wired network, broadcasting one or more SSIDs and managing radio channels, security settings, and client associations for its coverage area.

Related: PoE, 802.1X
Single-mode fiber

Optical cable with a very narrow core that carries a single light path, supporting long distances and high bandwidth; it typically uses laser optics rather than cheaper LED transmitters.

Related: OTDR
SD-WAN

A software-defined approach to wide area networking that centrally manages traffic across multiple links such as broadband, MPLS, and cellular, steering each application over the best available path.

SNMP

A protocol for polling and receiving alerts from network devices, where an agent on each device reports values from a management information base to a central monitoring station.

Related: Syslog, Baseline
Syslog

A standard for sending log messages from network devices to a central server, giving administrators one place to search events, retain records, and trigger alerts on patterns.

Related: SNMP
NetFlow

A feature that summarizes traffic flows through a router or switch, recording source, destination, ports, and byte counts so analysts can see who is talking to whom and how much.

Related: Baseline, Packet capture
Baseline

A recorded snapshot of normal performance and configuration captured when a system is healthy, used later to judge whether current behavior is a real fault or ordinary variation.

Related: SNMP, NetFlow
RPO and RTO

Paired recovery targets: the recovery point objective is the maximum tolerable data loss measured in time, while the recovery time objective is the maximum acceptable time to restore service after an outage.

Related: SLA
SLA

A formal agreement between a provider and a customer that states expected service levels, such as uptime percentages, latency limits, and the remedies owed when those targets are missed.

Related: RPO and RTO
Change management

A controlled process for proposing, reviewing, scheduling, and documenting modifications to network systems, intended to reduce outages caused by unplanned or untested alterations.

Related: Baseline
Stateful firewall

A security device that tracks active connections and permits return traffic automatically, deciding on packets using session state, addresses, ports, and configured policy rather than judging each packet alone.

Related: DMZ, Least privilege
IDS/IPS

A monitoring system that inspects traffic for attack signatures or anomalies; an IDS only alerts, while an IPS sits inline and can block the traffic it flags.

Related: Packet capture, Stateful firewall
IPsec VPN

A set of protocols that encrypts and authenticates traffic between sites or remote users over an untrusted network, commonly using IKE for key exchange and ESP for the protected payload.

Related: DMZ
802.1X

A port-based access control standard that keeps a switch port or wireless association closed until the connecting device proves its identity to an authentication server.

Related: RADIUS, Wireless access point
RADIUS

A central authentication protocol that verifies user or device credentials for network access and returns authorization attributes, commonly paired with 802.1X on switches and wireless controllers.

Related: 802.1X
DMZ

A segmented network sitting between the internet and the internal network, hosting public-facing servers so that a compromise there does not give attackers direct access to internal systems.

Related: Stateful firewall
Zero trust

A security model that grants no implicit trust based on network location; every request is authenticated, authorized, and logged, and access is limited to the minimum required.

Related: Least privilege, 802.1X
Least privilege

The practice of giving each user, service, or device only the permissions it needs to do its job, limiting the damage that a stolen credential or compromised account can cause.

Related: Zero trust
Ping

A utility that sends ICMP echo requests to a target and reports whether replies arrive and how long they take, giving a quick test of basic reachability and round-trip time.

Related: Traceroute
Traceroute

A tool that reveals the routers along the path to a destination by sending packets with increasing hop limits and recording where each probe expires, helping locate where traffic is lost.

Related: Ping
Packet capture

The recording of actual frames or packets on an interface for later analysis, showing protocol details, retransmissions, and errors that summary statistics alone cannot reveal.

Related: NetFlow, IDS/IPS
TDR

A copper cable test that sends a pulse down the wire and measures reflections to estimate the distance to a break or short, helping technicians locate a fault rather than merely confirm one.

Related: OTDR
OTDR

An instrument that injects light pulses into a fiber link and analyzes reflected and scattered light to measure loss, locate splices and breaks, and report distance along the cable.

Related: TDR, Single-mode fiber
Duplex mismatch

A condition where two connected interfaces disagree about full- versus half-duplex operation, producing collisions, late collisions, and poor throughput that worsen as traffic rises.

Related: Jitter
Jitter

Variation in the delay between packets arriving at a destination; small amounts are harmless to file transfers but cause choppy voice and video where timing matters.

Related: Ping, Duplex mismatch

CompTIA Network+ study plan

8 weeks · About 7 hours per week

Week 1

Networking concepts

  • Name all seven OSI layers in order and list at least two protocols or devices that operate at each layer

  • Match 25 common TCP/UDP ports to their services and state whether each is TCP, UDP, or both

  • Compare star, mesh, hub-and-spoke, and spine-leaf topologies by cost, redundancy, and fault isolation

  • Distinguish IaaS, PaaS, and SaaS plus public, private, and hybrid deployment models using one real-world example each

  • Differentiate north-south from east-west traffic and identify where each appears in a cloud design

Your checkpoint

A self-built 25-row port/protocol/layer reference table, self-quizzed to 90% or better without notes

Week 2

Networking concepts

  • Convert between binary, dotted-decimal, and CIDR notation for IPv4 addresses without a calculator

  • Classify addresses as private, public, loopback, link-local, or APIPA and state when each is used

  • Calculate network ID, broadcast address, and usable host range for /24 through /30 subnets

  • Identify the purpose of A, AAAA, CNAME, MX, TXT, and PTR records and describe DHCP DORA steps in order

  • Summarize IPv6 addressing types (global unicast, link-local, multicast, anycast) and compare to IPv4 equivalents

Your checkpoint

A completed 20-problem subnetting and addressing worksheet scored at 85% or higher with work shown

Week 3

Network troubleshooting

  • Apply the structured troubleshooting methodology (identify, establish theory, test, plan, implement, verify, document) in writing to three separate fault scenarios

  • Diagnose physical-layer faults by symptom, including duplex mismatch, cable length limits, crosstalk, attenuation, and incorrect connector type

  • Interpret the output of ping, traceroute, ipconfig/ifconfig, nslookup/dig, arp, netstat, and tcpdump-style captures

  • Distinguish attenuation, latency, jitter, and packet loss and select the metric that explains a given user complaint

Your checkpoint

A 10-entry triage log that maps each symptom to an OSI layer, the tools used, and the confirmed root cause

Week 4

Network troubleshooting & Network implementation

  • Troubleshoot switching faults including VLAN misassignment, STP loops, port security violations, and MAC flapping

  • Troubleshoot wireless faults including channel overlap, interference, roaming failures, and authentication mismatch

  • Compare static and dynamic routing and identify the cause of asymmetric or looping routes from a routing table

  • Sequence the physical installation steps for a small office, including rack placement, power, cooling, and cable management

Your checkpoint

A timed 40-question Domain 1 and Domain 5 practice set completed at 80% or better, with every missed item rewritten as a corrected note card

Week 5

Network implementation

  • Design a VLAN and subnet plan for a three-department office including trunk and access port assignments

  • Compare 802.11 standards and select appropriate bands, channels, and channel widths for a given interference scenario

  • Distinguish router, switch, firewall, load balancer, and proxy functions and place each correctly in a sample topology

  • Configure a DHCP scope, reservation, and DNS server assignment conceptually and explain the effect of each setting

  • Compare SD-WAN, MPLS, broadband, and cellular WAN options by cost, redundancy, and latency

Your checkpoint

A labeled network diagram plus a one-page configuration sheet covering VLANs, IP ranges, DHCP scope, wireless SSID/band/channel, and WAN link choice

Week 6

Network operations & Network implementation

  • Produce documentation artifacts: physical and logical diagrams, IP address management table, and change-management record

  • Select appropriate monitoring metrics and alert thresholds for bandwidth, interface errors, uptime, and device health

  • Compare high-availability approaches including load balancing, NIC teaming, VRRP/HSRP, and redundant power and links

  • Differentiate backup types (full, incremental, differential, snapshot) and state recovery point and recovery time implications

  • Explain how configuration management, patching cadence, and automated rollback reduce operational risk

Your checkpoint

A mock network operations package for one site: diagram, IPAM table, monitoring/threshold plan, backup schedule, and a completed change record

Week 7

Network security

  • Differentiate attack types including phishing, on-path, VLAN hopping, ARP spoofing, DoS, and insider threat by mechanism and indicator

  • Apply device hardening: disable unused ports and services, change defaults, enable SSH over Telnet, and enforce least privilege

  • Distinguish IDS from IPS, and stateful firewall from stateless ACL, by placement and traffic-handling behavior

  • Compare authentication and access controls including MFA, RADIUS, TACACS+, 802.1X, and role-based access

  • Describe the purpose of a site survey-free logical security zone (DMZ, guest, management) and which traffic each permits

Your checkpoint

A 15-item hardening checklist applied item-by-item to a lab router, switch, and wireless AP, with pass/fail noted and fixes recorded

Week 8

Networking concepts & Network troubleshooting & Network implementation & Network operations & Network security

  • Re-score every previously missed practice item and confirm each is now answered correctly with reasoning

  • Complete two full-length timed practice exams under exam conditions

  • Build a one-page memory sheet covering ports, subnetting shortcuts, wireless standards, and troubleshooting order

  • Identify the weakest two objectives from practice results and re-drill them with focused recall sessions

Your checkpoint

Two full-length practice exams scored at 85% or better, plus a completed one-page memory sheet and a ranked weak-objective list

Milestones

Week 2: Ports/protocols table recalled at 90% or better and subnetting worksheet at 85% or better - Domain 1 foundation is solid before moving on

Week 4: Timed 40-question Domain 1 plus Domain 5 set scored at 80% or better, with all misses converted into corrected note cards

Week 6: Network diagram and operations package complete, and a mixed 30-question Domain 2 plus Domain 3 set scored at 80% or better

Week 7: Hardening checklist fully applied with all failures remediated and re-verified

Week 8: Two full-length timed practice exams at 85% or better across all five domains, with no domain below 75%

CompTIA Network+ exam day

Your checklist

Primary photo ID with signature

Bring a current, unexpired government-issued ID that shows both your photo and your signature (driver's license, passport, or similar). Your name on the ID must match your registration exactly. Confirm with the provider which specific documents they accept at your location.

Second form of identification

CompTIA exam delivery typically asks for more than one ID, at least one of which is a government photo ID with signature. Have a second signed ID (bank card, credit card, or another document with your name and signature) available, and confirm the exact requirement with the provider before test day.

Appointment confirmation and exam code

Carry your appointment confirmation (printed or on paper, since phones usually go into a locker) with the exam code N10-009, date, time, and test-center address or online session link.

Travel and arrival plan

Know the route, parking, and building/floor of the test center, or the room you will use for an online-proctored session. Build in buffer for traffic, security screening, and check-in.

Online-proctored setup tested in advance

If testing remotely, run the delivery vendor's system test on the same computer, camera, microphone, and network you will use on test day, and confirm the room and desk requirements with the provider.

Knowledge of the exam format

N10-009 allows a maximum of 90 questions in 90 minutes with a passing scaled score of 720 on a 100-900 scale. Expect multiple-choice (single and multiple response), drag-and-drop, and performance-based items.

Scratch material plan

Test centers normally supply an erasable board or paper that the proctor collects afterward. For online sessions, confirm with the provider exactly which writing materials (if any) are permitted before you sit down.

Restroom and hydration done beforehand

There is generally no scheduled break and the timer keeps running, so use the restroom and drink water before check-in rather than mid-exam. Confirm the provider's break policy.

Phone and smartwatch plan

Decide where your phone, smartwatch, and any other device will stay. They cannot be in the testing room; test centers usually provide a locker, and online sessions require them out of the room entirely.

Comfort and focus basics

Dress in layers because room temperature varies, eat a normal meal beforehand, and protect your sleep the night before rather than cramming late.

Plan the day

72 hours before

Re-read the official exam objectives list and mark your three weakest domains. Do one timed practice set under real conditions, then stop introducing brand-new topics.

72 hours before

Reconfirm the appointment date, time, location or online session details, and your ID documents against your registration name. Resolve any mismatch now, since name problems at check-in can cost you the appointment.

48 hours before

Do targeted review of high-yield memorization: common port numbers and protocols, IPv4/IPv6 addressing and subnetting math, wireless standards, Ethernet and fiber cable specs, and troubleshooting methodology.

24 hours before

Light review only - skim your own summary sheet of formulas and tables. Do not take a full practice exam the night before; it adds fatigue without adding knowledge.

24 hours before

Pack your IDs, appointment confirmation, and directions. If testing online, re-run the system test, clear the desk, and confirm the room can be closed off and is free of notes and screens.

Night before

Set two alarms, aim for a normal night's sleep, and stop studying at a reasonable hour.

Morning of

Eat a normal meal, arrive at the test center roughly 15-30 minutes early (or log in early for an online session), and avoid last-minute cramming in the parking lot or lobby.

During the test - opening

Accept the candidate agreement, then take a few minutes to write down reference tables (subnet masks, port list, wireless standards) on your scratch material before the clock pressure builds.

During the test - pacing

With up to 90 questions in 90 minutes you have about one minute per item. Performance-based items take longer, so budget for them and do not let a single simulation consume ten minutes.

During the test - strategy

Answer every question; there is no penalty for a wrong answer. Flag anything you are unsure of and move on, then return to flagged items with the time you have left.

During the test - wording

Read for qualifiers such as BEST, FIRST, MOST LIKELY, and EXCEPT. On multiple-response items, count how many answers are requested before submitting.

After the test

Note the pass/fail result and the section-level breakdown on your score report, and keep the report for your records and for any employer reimbursement process.

Rules to check

  • Identification must match your registration exactly. Bring the required ID forms; if your name differs from the registration, correct it with the provider before test day. Confirm the provider's exact ID policy rather than assuming.

  • No notes, books, printed material, phones, smartwatches, or other devices are allowed in the testing room. Test centers typically provide storage; unauthorized items in the room can void your exam.

  • There is generally no scheduled break and the timer does not pause. If you leave the room, you may be subject to re-check on return and the clock keeps running - confirm the provider's break rules.

  • Scoring is pass/fail against a scaled score: 100-900, with 720 required to pass Network+ N10-009. Your score report also shows performance by domain, which is useful feedback if you must retest.

  • You accepted a candidate agreement that prohibits disclosing, reproducing, or discussing exam content. Do not post questions, PBQ scenarios, or answer dumps; doing so can invalidate your certification.

  • If you need a testing accommodation, request it through the certification provider well before your appointment; accommodations are not arranged at the counter on test day.

  • If you must reschedule or cancel, do it as early as possible - providers impose a cutoff window after which the fee is forfeited. Confirm the current cutoff with the provider.

  • If you do not pass, a waiting period applies before you can retake the same exam, and you pay the full exam fee again. Confirm the current retake window with the provider.

CompTIA Network+ FAQ

How many CompTIA Network+ practice questions are available?

The practice set has 200 CompTIA Network+ questions. Each one includes the choices, the correct answer, and an explanation, and the set is free to read with no signup.

How many CompTIA Network+ flashcards are available?

The flashcard set has 32 CompTIA Network+ cards. Each card shows the term and its definition.

Which topics does the CompTIA Network+ study material cover?

The CompTIA Network+ study material has 5 sections, including Networking Concepts: Models, Ports, and Addressing, Network Implementation: Routing, Switching, Wireless, and Physical Plant, and Network Operations: Monitoring, Documentation, and Continuity.

What format facts does the catalog list for the CompTIA Network+ exam?

The catalog lists a duration of 90 minutes and these item types: multiple choice and performance-based for the CompTIA Network+ exam.