CySA+ overview

  • 200 practice questions
  • 32 flashcards
  • 4 study guide topics
  • 38 key terms

What you'll study

  • Security Operations34%
  • Vulnerability Management26%
  • Incident Response24%
  • Reporting and Communication16%

CompTIA Cybersecurity Analyst (CySA+) is an intermediate-level, vendor-neutral certification that validates the practical skills needed to detect, analyze, and respond to security threats in a security operations center. It sits on the CompTIA Cybersecurity Career Pathway between Security+ and SecurityX, and is aimed at analysts with roughly four years of hands-on experience in a SOC analyst (Level 2) or vulnerability analyst role, or three to four years of related information security experience or equivalent training. Typical job roles include security analyst, SOC analyst, vulnerability analyst, threat intelligence analyst, and incident responder. The current exam, V4 (CS0-004), is organized into four domains: Security Operations (34%), Vulnerability Management (26%), Incident Response (24%), and Reporting and Communication (16%), with added emphasis on cloud environments, AI-assisted detection, zero trust, and risk-based vulnerability prioritization. Candidates face up to 85 questions in 165 minutes - multiple-choice, drag-and-drop, and performance-based items - and must score 750 on a 100–900 scale. Because the performance-based questions reward applied skill, preparation should pair structured study with hands-on practice in log analysis, vulnerability assessment, and incident investigation.

Common mistakes

Prioritizing remediation from the CVSS base score alone, such as patching a low-value lab host first while ignoring an internet-facing business-critical asset with a known exploited vulnerability.

Candidates memorize CVSS as a severity number and forget that risk depends on exposure, asset criticality, exploit likelihood, and compensating controls.

What to do instead

Practice ranking findings by contextual risk: known exploited status, exploit prediction, internet exposure, data sensitivity, business function, and existing controls. Be able to justify the priority in one sentence.

Treating every vulnerability scanner finding as confirmed exploitable and recommending emergency patching without validation.

Scanner output is often confused with proof of exploitability, and exam scenarios test whether the candidate distinguishes discovery from validation.

What to do instead

Separate discovery from validation. Know when to use authenticated scans, manual verification, exploit intelligence, or penetration testing, and when risk acceptance or mitigation is appropriate.

Selecting a log or telemetry source that cannot answer the question, such as using NetFlow to identify a malicious process name on an endpoint or antivirus logs to reconstruct lateral movement.

Candidates memorize tool categories but not the specific evidence each source contains.

What to do instead

For each scenario, ask what artifact would prove the claim: EDR process lineage, SIEM correlation, DNS logs, proxy logs, flow records, authentication logs, or file integrity monitoring. Match the evidence to the question.

Escalating every high-severity SIEM alert as a confirmed incident without triage, or closing an alert as a false positive after checking only one indicator.

Alert severity is mistaken for incident confirmation, and single-indicator reasoning replaces corroboration and scoping.

What to do instead

Triage by corroborating multiple indicators, checking asset criticality, determining scope, and applying policy. Distinguish false positive, benign true positive, and confirmed incident before escalation.

Jumping directly to eradication or recovery after detecting malware, such as deleting files or rebuilding a host before containment and scoping are complete.

Action bias and memorized cleanup steps cause candidates to skip phase order and lose evidence or miss additional compromised systems.

What to do instead

Follow the incident response lifecycle: contain first when needed, preserve evidence, scope the incident, eradicate the root cause, validate, recover, and conduct post-incident review. Know that the immediate first action depends on safety and policy.

Powering off a compromised machine or imaging the disk before collecting volatile memory and network state.

Normal IT troubleshooting habits conflict with forensic order of volatility, and candidates confuse containment with shutdown.

What to do instead

Apply order of volatility: capture memory, running processes, network connections, and other volatile data first when policy allows. Isolate the network without powering off, and document hashes and chain of custody.

Confusing containment with eradication, such as disabling a compromised account and declaring the incident resolved while attacker persistence remains.

The terms overlap in practice, and pressure to close an incident encourages premature resolution.

What to do instead

Define phase outputs explicitly: containment limits spread, eradication removes the actor and artifacts, recovery restores operations, and post-incident activity captures lessons learned. Verify persistence is removed before recovery.

Writing the same technical narrative for executives and analysts, burying business impact and required decisions under packet captures and command-line output.

Candidates answer what happened technically but not why it matters or what decision makers must do.

What to do instead

Tailor the report to the audience: executive summary with business impact, risk, and decisions needed; technical appendix with evidence, timeline, root cause, affected assets, and recommendations.

Omitting escalation and notification obligations when an incident involves personal data, regulated information, or third-party systems.

Candidates focus on technical response and forget legal, privacy, regulatory, management, and communication requirements.

What to do instead

Know the incident severity matrix, escalation paths, and legal or regulatory triggers. In scenarios, state who must be notified, who owns communications, and whether breach notification timelines apply.

Reporting vulnerability metrics inaccurately, such as equating the number of findings with risk or citing MTTR without defining start and stop points, then recommending 'patch everything' instead of measurable risk reduction.

Candidates misuse common security metrics and do not connect remediation reporting to business objectives.

What to do instead

Define each metric precisely, use trends and baselines, report remediation rates, exposure reduction, SLA compliance, and accepted risk. Tie recommendations to measurable risk reduction and business priorities.

Exam requirements can change. Confirm current details with the exam provider.

CySA+ practice

200 questions. Each one lists the choices, the correct answer, and an explanation. With JavaScript, this list opens one question at a time. The checker at the top of this page saves progress in this browser when it is available.

  1. Question 1Security Operations

    During incident response, which data source should be collected first according to the order of volatility?

    1. Files stored on the hard disk
    2. Backups stored on tape
    3. Logs archived to a remote syslog server
    4. Contents of RAM Correct answer.

    Explanation

    The order of volatility prioritizes data that changes or disappears fastest, starting with CPU registers and cache, then RAM and swap, then network state, disk, remote logs, and backups. Collecting RAM first preserves volatile evidence such as running processes and network connections.

  2. Question 2Security Operations

    What is the primary purpose of maintaining a chain of custody for digital evidence?

    1. To record who handled evidence and when to preserve its admissibility Correct answer.
    2. To compress evidence to save storage space
    3. To encrypt evidence so unauthorized users cannot read it
    4. To automatically analyze evidence for malware

    Explanation

    A chain of custody documents every transfer and access of evidence, showing that it was handled without alteration. This record supports the reliability and admissibility of evidence in legal or disciplinary proceedings.

  3. Question 3Security Operations

    An analyst images a suspect disk and computes a SHA-256 hash before and after analysis. What does matching hashes demonstrate?

    1. The disk contained no malware
    2. The suspect used full-disk encryption
    3. The evidence has not been altered since acquisition Correct answer.
    4. The image can be safely deleted

    Explanation

    A cryptographic hash acts as a fingerprint; matching values before and after analysis show that the image is bit-for-bit unchanged. Hash integrity does not prove the absence of malware or encryption.

  4. Question 4Security Operations

    In vulnerability management, what is a false positive?

    1. A vulnerability reported by a scanner that does not actually exist on the target Correct answer.
    2. A vulnerability that is exploited in the wild
    3. A real vulnerability that the scanner fails to report
    4. A vulnerability that has no available patch

    Explanation

    A false positive is a finding that the scanner reports but that is not present or not exploitable on the target. False negatives are the opposite: real issues the scanner misses.

  5. Question 5Security Operations

    A workstation is confirmed to be infected with ransomware and is actively encrypting files. Which action is the best immediate containment step?

    1. Run a full antivirus scan on the workstation
    2. Reimage the workstation immediately
    3. Restore the workstation from backup
    4. Isolate the workstation from the network Correct answer.

    Explanation

    Containment aims to stop the spread; isolating the host prevents ransomware from reaching network shares or other systems. Reimaging and restoring are eradication or recovery actions and should follow containment.

  6. Question 6Security Operations

    What is the primary goal of the lessons-learned phase of incident response?

    1. To determine which employee to terminate
    2. To restore systems to normal operation
    3. To identify improvements to processes and controls after an incident Correct answer.
    4. To calculate the exact financial loss

    Explanation

    Lessons learned reviews the incident to improve future prevention, detection, and response. It focuses on process and control gaps rather than blame or exact loss calculation.

  7. Question 7Security Operations

    Which Windows Security event ID indicates a failed logon attempt?

    1. 4672
    2. 4624
    3. 4688
    4. 4625 Correct answer.

    Explanation

    Windows Security event 4625 records a failed logon. Event 4624 records successful logon, 4672 records special privileges assigned, and 4688 records process creation.

  8. Question 8Security Operations

    What is the main advantage of a credentialed vulnerability scan over an uncredentialed scan?

    1. It automatically exploits discovered vulnerabilities
    2. It cannot produce false positives
    3. It requires no network access to the target
    4. It provides more accurate detection of missing patches and local misconfigurations Correct answer.

    Explanation

    Credentialed scans log on to the target and can inspect local patch levels, registry settings, and installed software, producing more accurate results. They still require network access and can still generate false positives.

  9. Question 9Security Operations

    A legal team notifies security that litigation is pending and certain logs must be preserved. What should the security team do first?

    1. Delete all logs to reduce legal exposure
    2. Suspend routine log rotation and deletion for the specified systems Correct answer.
    3. Continue normal log retention without changes
    4. Encrypt the logs and discard the keys

    Explanation

    A legal hold requires preserving potentially relevant data and stopping routine destruction such as log rotation or deletion. The scope of preserved systems and data should follow legal guidance.

  10. Question 10Security Operations

    Which of the following is the best example of a tactic, technique, and procedure (TTP) rather than an indicator of compromise?

    1. A file hash of a known malware sample
    2. An IP address associated with a known botnet
    3. A domain name used for phishing
    4. Use of PowerShell to download and execute a payload Correct answer.

    Explanation

    TTPs describe adversary behavior and methodology, such as using PowerShell for download and execution. IP addresses, hashes, and domains are atomic indicators that can change quickly.

  11. Question 11Security Operations

    Which pair of standards is commonly used to exchange cyber threat intelligence in a structured, automated way?

    1. SAML and OAuth
    2. SNMP and Syslog
    3. STIX and TAXII Correct answer.
    4. DNSSEC and HTTPS

    Explanation

    STIX provides a structured language for threat intelligence, and TAXII defines a transport protocol for exchanging it. The other pairs serve network management, authentication, or DNS/web security.

  12. Question 12Security Operations

    A vulnerability has a CVSS base vector of AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H. What does this indicate?

    1. It is remotely exploitable with low complexity and no privileges or user interaction Correct answer.
    2. It requires local access and high privileges
    3. It cannot be exploited over the network
    4. It affects only availability

    Explanation

    AV:N means network exploitable, AC:L low complexity, PR:N no privileges required, and UI:N no user interaction. C:H, I:H, and A:H indicate high impact to confidentiality, integrity, and availability.

  13. Question 13Security Operations

    An analyst runs an Nmap scan and sees port 22 open with service SSH, port 80 open with HTTP, and port 443 open with HTTPS. Which conclusion is best supported?

    1. The host is likely running a web server with remote administration enabled Correct answer.
    2. The host has no network services
    3. The host is a database server
    4. The host is definitely compromised

    Explanation

    Open ports identify services that are listening; SSH plus HTTP/HTTPS suggests remote administration and a web server. Open ports alone do not prove compromise or reveal the host's full role.

  14. Question 14Security Operations

    EDR output shows winword.exe spawning powershell.exe with an encoded command. What is the most likely interpretation?

    1. Normal Microsoft Word update behavior
    2. A hardware driver installation
    3. A possible malicious macro is executing PowerShell Correct answer.
    4. A routine DNS lookup

    Explanation

    Microsoft Word does not normally spawn PowerShell, especially with encoded commands. This parent-child relationship is a common sign of a malicious macro or exploit launching a payload.

  15. Question 15Security Operations

    Hosts on the network make regular HTTPS connections to the same external IP every 60 seconds with small, consistent payloads. Which activity does this most likely represent?

    1. A scheduled software update check
    2. Normal NTP time synchronization
    3. Command-and-control beaconing Correct answer.
    4. DNS zone transfer

    Explanation

    Repeated, periodic small connections to the same external endpoint are characteristic of malware beaconing to command-and-control infrastructure. NTP uses UDP 123, updates are less rigidly periodic, and zone transfers use DNS TCP 53.

  16. Question 16Security Operations

    A DNS log shows many long, random-looking subdomain queries to a single domain, such as a1b2c3.example.com. What should the analyst suspect?

    1. DNS tunneling or data exfiltration Correct answer.
    2. A misconfigured DHCP server
    3. A legitimate reverse DNS lookup
    4. A denial-of-service attack against the DNS server

    Explanation

    Long, random subdomains sent to one domain can encode data in DNS queries, a common tunneling or exfiltration technique. Legitimate reverse lookups use PTR records and are not random subdomain floods.

  17. Question 17Security Operations

    After containing a malware outbreak, the team removes the malware and closes the initial access vector. Which incident response phase does this describe?

    1. Lessons learned
    2. Preparation
    3. Eradication Correct answer.
    4. Recovery

    Explanation

    Eradication removes the malicious code and the root cause, such as the exploited vulnerability or compromised account. Recovery then restores normal operations and validates that systems are clean.

  18. Question 18Security Operations

    A SIEM rule alerts when more than 10 failed logons for the same account occur within 5 minutes from different source IPs. What type of attack does this rule best detect?

    1. SQL injection
    2. A distributed brute-force attack Correct answer.
    3. Cross-site scripting
    4. ARP spoofing

    Explanation

    Multiple failed authentication attempts for one account in a short window indicate password guessing, such as brute force or credential stuffing. The rule correlates authentication events rather than web or network-layer attacks.

  19. Question 19Security Operations

    An email header shows SPF fail, DKIM fail, and DMARC fail, but the display name matches the CEO. What is the best conclusion?

    1. The email is likely spoofed and should be treated as phishing Correct answer.
    2. The email is definitely legitimate because the display name matches
    3. The email was sent from an internal server
    4. The failure is caused by the recipient's mailbox being full

    Explanation

    SPF, DKIM, and DMARC failures indicate the sending domain was not authenticated; a matching display name is easily forged. Such messages should be treated as suspected phishing until verified.

  20. Question 20Security Operations

    Two vulnerabilities have the same CVSS base score. One has a public exploit available and is actively exploited in the wild. Which should be prioritized first?

    1. The vulnerability with no known exploit
    2. The one with the lower CVSS temporal score
    3. The vulnerability with known active exploitation Correct answer.
    4. Both should be ignored until the next annual scan

    Explanation

    Risk prioritization considers threat context, not just base score. Active exploitation and public exploit availability increase the likelihood and urgency of remediation.

  21. Question 21Security Operations

    A vulnerability has a high CVSS base score but a low EPSS score and no known exploitation. How should an analyst interpret this?

    1. EPSS replaces the need for patching
    2. The CVSS score is invalid
    3. The vulnerability is guaranteed to be exploited soon
    4. The vulnerability is severe in theory but less likely to be exploited in the near term Correct answer.

    Explanation

    EPSS estimates the probability that a vulnerability will be exploited in the wild in the near term. A high CVSS with low EPSS and no known exploitation suggests high theoretical severity but lower immediate likelihood, though remediation should still be planned.

  22. Question 22Security Operations

    Which process behavior is most suspicious on a Linux web server?

    1. A web server process spawning a shell that connects to an external IP Correct answer.
    2. The package manager installing security updates
    3. The cron daemon executing a scheduled backup script
    4. The SSH daemon accepting a login from an administrator

    Explanation

    A web server process spawning an interactive shell and making an outbound connection is a common indicator of a web shell or remote code execution. Normal administrative and maintenance processes do not typically produce that parent-child chain.

  23. Question 23Security Operations

    An analyst observes a workstation uploading 10 GB to an unfamiliar cloud storage domain at 2 a.m. while the user is offline. What is the most likely explanation?

    1. DNS resolution failure
    2. Normal software patching
    3. Data exfiltration Correct answer.
    4. Printer driver update

    Explanation

    Large outbound transfers to an unfamiliar destination outside business hours and user activity suggest unauthorized data exfiltration. Patching and driver updates do not typically involve large uploads to unknown cloud storage.

  24. Question 24Security Operations

    Which approach best describes hypothesis-driven threat hunting?

    1. Proactively searching for evidence of a specific adversary behavior based on threat intelligence Correct answer.
    2. Reviewing firewall rules for compliance
    3. Running a vulnerability scan and patching all findings
    4. Waiting for SIEM alerts before investigating

    Explanation

    Threat hunting starts with a hypothesis about adversary behavior, often derived from threat intelligence, and proactively searches telemetry for evidence. It is not reactive alert triage or compliance review.

  25. Question 25Security Operations

    A suspicious process is running on a server, but its executable file has been deleted from disk. Which artifact is most useful for determining what the process was doing?

    1. The DNS zone file
    2. A memory capture of the server Correct answer.
    3. The firewall rule set
    4. The disk image of the server

    Explanation

    When the executable is deleted from disk, the running process and its code, strings, and network connections may still exist in memory. A memory capture preserves that volatile evidence for analysis.

  26. Question 26Security Operations

    Which protocol do many network devices use to send event logs to a centralized SIEM?

    1. SNMP trap messages
    2. SMTP email relay
    3. NTP time synchronization
    4. Syslog Correct answer.

    Explanation

    Syslog is the standard protocol for transporting event messages from network devices and servers to a central collector. It carries facility and severity information that a SIEM can parse and correlate.

  27. Question 27Security Operations

    What is the primary security benefit of deploying a honeypot?

    1. It provides early warning of attacks. Correct answer.
    2. It filters outbound email messages for sensitive content.
    3. It authenticates users who connect to wireless networks.
    4. It encrypts all data stored on production servers.

    Explanation

    A honeypot is a decoy system with no legitimate production use, so any interaction with it is suspicious. It provides early warning and can reveal attacker tools or techniques before real assets are affected.

  28. Question 28Security Operations

    What does NetFlow primarily record about network traffic?

    1. Connection metadata such as addresses and byte counts Correct answer.
    2. The complete payload of every packet for later replay and analysis
    3. The decrypted content of every TLS session on the network
    4. User keystrokes captured from monitored endpoint devices

    Explanation

    NetFlow exports metadata about flows, including source and destination addresses, ports, protocol, and byte and packet counts. It does not capture full packet payloads, so content analysis requires packet capture.

  29. Question 29Security Operations

    What does inclusion in the CISA Known Exploited Vulnerabilities catalog indicate?

    1. The vulnerability is confirmed to have been exploited in the wild Correct answer.
    2. The vulnerability has a CVSS base score greater than 9.0 and a network attack vector
    3. The vulnerability affects only operating systems that are past end-of-life support
    4. The vulnerability can be remediated only by physically replacing the affected hardware

    Explanation

    The KEV catalog lists vulnerabilities that have been observed being exploited in the wild. It is used to prioritize remediation because exploitation is confirmed, not merely theoretical.

  30. Question 30Security Operations

    Which Windows Security event ID records a successful logon?

    1. 4688
    2. 4625
    3. 4624 Correct answer.
    4. 5140

    Explanation

    Event ID 4624 is generated when an account successfully logs on. The logon type field in the event distinguishes interactive, network, and other logon methods.

  31. Question 31Security Operations

    What is the primary role of a security orchestration, automation, and response (SOAR) platform?

    1. To provide a managed detection and response service staffed by a third-party vendor
    2. To encrypt endpoint disks and manage the associated recovery keys
    3. To automate response tasks through playbooks Correct answer.
    4. To replace all human analysts with fully autonomous decision-making systems

    Explanation

    SOAR platforms coordinate security tools and execute playbooks that automate repetitive investigation and response steps. This reduces response time and lets analysts focus on decisions requiring judgment.

  32. Question 32Security Operations

    What is the purpose of detonating a suspicious file in a sandbox?

    1. To permanently remove the file from the production network
    2. To distribute it to other hosts for testing
    3. To observe its behavior in an isolated environment Correct answer.
    4. To calculate its MD5 hash for the file inventory

    Explanation

    A sandbox executes the file in an isolated environment and records its behavior, such as file changes, network connections, and process creation. This provides behavioral evidence without risking production systems.

  33. Question 33Security Operations

    Which control is designed to alert when a critical system file is modified?

    1. Security awareness training
    2. Data loss prevention
    3. File integrity monitoring Correct answer.
    4. Network access control

    Explanation

    File integrity monitoring baselines critical files and alerts when their content, permissions, or attributes change. It is commonly used to detect tampering with system binaries and configuration files.

  34. Question 34Security Operations

    Authentication logs show a user account logging in from New York and then from Singapore eight minutes later. Which detection should this trigger?

    1. Password spraying attack
    2. Impossible travel Correct answer.
    3. ARP spoofing attack
    4. Kerberoasting attack

    Explanation

    The two locations are too far apart to travel between within eight minutes, so the logins cannot both be legitimate from the same user. This pattern is called impossible travel and may indicate compromised credentials.

  35. Question 35Security Operations

    A packet capture shows thousands of TCP SYN packets from spoofed source addresses, with no completed handshakes. Which attack does this indicate?

    1. Pass-the-hash
    2. SYN flood Correct answer.
    3. SQL injection
    4. DNS amplification

    Explanation

    A SYN flood exhausts connection state by sending many half-open connection requests without completing the TCP handshake. Spoofed sources make the final ACK unlikely, which is characteristic of the attack.

  36. Question 36Security Operations

    What is the primary purpose of the MITRE ATT&CK framework?

    1. To define approved encryption algorithms for data at rest
    2. To assign CVSS base scores to software vulnerabilities
    3. To catalog adversary tactics and techniques Correct answer.
    4. To certify organizations against an international security standard

    Explanation

    ATT&CK organizes observed adversary behavior into tactics and techniques, giving defenders a common vocabulary for detection and threat hunting. It is not a scoring system or certification standard.

  37. Question 37Security Operations

    Which metric estimates the probability that a vulnerability will be exploited in the next 30 days?

    1. CVSS
    2. CVE
    3. EPSS Correct answer.
    4. CWE

    Explanation

    The Exploit Prediction Scoring System (EPSS) produces a probability score for exploitation in the near term. It complements severity scoring by helping teams prioritize vulnerabilities that are more likely to be attacked.

  38. Question 38Security Operations

    Which Windows artifact is most useful for determining whether a program executed on a host?

    1. Prefetch files Correct answer.
    2. Pagefile backing store
    3. Hosts file mappings
    4. SAM account database

    Explanation

    Prefetch files are created when programs execute and record details such as the executable path and run count. This makes them valuable for confirming execution during forensic analysis.

  39. Question 39Security Operations

    On a Linux server, which file typically records authentication successes and failures?

    1. /var/www/html/access.log
    2. /etc/passwd
    3. /etc/fstab
    4. /var/log/auth.log Correct answer.

    Explanation

    On many Linux distributions, authentication events are written to /var/log/auth.log, or to /var/log/secure on some systems. These entries include logon successes, failures, and privilege escalation through sudo.

  40. Question 40Security Operations

    Which activity is best identified by reviewing web proxy logs?

    1. Outbound web requests by internal users Correct answer.
    2. Disk partition layout on a workstation
    3. Local file permission changes on a server
    4. Memory allocation by a kernel driver

    Explanation

    Web proxy logs record outbound HTTP and HTTPS requests, including URLs, user agents, and source users or hosts. They are useful for identifying suspicious downloads, command-and-control callbacks, and policy violations.

  41. Question 41Security Operations

    EDR alerts that a non-standard process opened a handle to lsass.exe with read access. What activity is most likely?

    1. Disk defragmentation
    2. Credential dumping Correct answer.
    3. DNS zone transfer
    4. Print spooler crash

    Explanation

    LSASS stores credential material, so a non-standard process reading its memory is a common sign of credential dumping tools such as Mimikatz. Defragmentation, spooler crashes, and DNS zone transfers do not require reading LSASS.

  42. Question 42Security Operations

    A threat hunter forms a hypothesis that attackers may use scheduled tasks for persistence and searches endpoint telemetry for evidence. What is this activity called?

    1. Vulnerability scanning
    2. Asset inventory
    3. Penetration testing
    4. Threat hunting Correct answer.

    Explanation

    Threat hunting is a proactive, hypothesis-driven search for evidence of compromise that may not have triggered existing alerts. It differs from scanning, testing, and inventory, which have different primary purposes.

  43. Question 43Security Operations

    What is the primary security benefit of network segmentation?

    1. It limits lateral movement between systems Correct answer.
    2. It eliminates the need for user authentication
    3. It increases the maximum speed of internet links
    4. It automatically patches operating systems

    Explanation

    Segmentation divides the network into zones with controlled traffic paths, which limits how far an attacker can move after compromising one host. It does not replace authentication, patching, or bandwidth planning.

  44. Question 44Security Operations

    What is the primary purpose of data loss prevention (DLP)?

    1. To detect and block inbound malware downloads
    2. To authenticate users before they access email
    3. To encrypt all network traffic between switches
    4. To block unauthorized transfers of sensitive data Correct answer.

    Explanation

    DLP inspects data in motion, at rest, or in use and applies policy to prevent sensitive information from leaving authorized boundaries. It focuses on data confidentiality rather than inbound malware or link encryption.

  45. Question 45Security Operations

    Why would a security team configure TLS inspection on a forward proxy?

    1. To decrypt HTTPS traffic for threat inspection Correct answer.
    2. To replace the need for endpoint antivirus software
    3. To prevent users from visiting any external websites
    4. To increase the strength of server-side encryption keys

    Explanation

    TLS inspection decrypts outbound HTTPS sessions at the proxy so security controls can examine the content for malware, data exfiltration, or policy violations. The proxy then re-encrypts traffic to the destination.

  46. Question 46Security Operations

    A domain controller logs event 4769 with RC4 encryption for several service accounts from one workstation in a short period. Which attack is most likely?

    1. Kerberoasting Correct answer.
    2. DCSync
    3. Golden Ticket
    4. LLMNR poisoning

    Explanation

    Kerberoasting requests service tickets for service accounts and then attempts to crack the ticket encryption offline. A burst of 4769 events with weak RC4 encryption from one host is a characteristic sign.

  47. Question 47Security Operations

    A memory analysis shows a running process whose executable path does not exist on disk and whose memory contains a PE header. What does this most likely indicate?

    1. A normal Windows update
    2. Process injection Correct answer.
    3. A scheduled backup job
    4. A disk fragmentation issue

    Explanation

    A process with no corresponding executable on disk and executable code in memory suggests code was injected or reflectively loaded. This is a common malware technique for evading file-based detection.

  48. Question 48Security Operations

    An analyst finds a large password-protected RAR archive in a user's temp directory containing many documents, and outbound traffic to a cloud storage site follows. Which stage of the attack does this represent?

    1. Privilege escalation
    2. Data staging Correct answer.
    3. Initial access
    4. Reconnaissance

    Explanation

    Collecting and compressing files into an archive before sending them out is data staging, which immediately precedes exfiltration. The outbound transfer to cloud storage supports the exfiltration interpretation.

  49. Question 49Security Operations

    Which CVSS metric group reflects characteristics that change over time, such as exploit code maturity and remediation level?

    1. Scope metric
    2. Temporal metrics Correct answer.
    3. Environmental metrics
    4. Base metrics

    Explanation

    Temporal metrics adjust the score for factors that can change as time passes, including exploit code maturity, remediation level, and report confidence. Base metrics describe intrinsic properties, and environmental metrics reflect the organization's context.

  50. Question 50Security Operations

    A SIEM rule shows one account authenticating to many servers over SMB within a few minutes from a single workstation. What should the analyst investigate first?

    1. Lateral movement Correct answer.
    2. A physical break-in at the data center
    3. A DNS zone transfer request
    4. A ransomware file encryption event

    Explanation

    A single account rapidly authenticating to many servers over SMB is consistent with credential reuse to move laterally. The analyst should identify the account, source host, and accessed systems before containment.

  51. Question 51Security Operations

    In syslog, which severity level indicates the highest priority?

    1. Emergency (severity 0) Correct answer.
    2. Informational (severity 6)
    3. Warning (severity 4)
    4. Debug (severity 7)

    Explanation

    Syslog severity levels range from 0 to 7, with lower numbers representing more severe conditions. Severity 0 is Emergency and indicates the system is unusable, making it the highest priority.

  52. Question 52Security Operations

    A file integrity monitoring (FIM) tool alerts that a critical server's /etc/passwd file changed outside a maintenance window. What is the tool primarily designed to detect?

    1. Unauthorized changes to monitored files Correct answer.
    2. Network bandwidth spikes
    3. Failed authentication attempts
    4. Malware signatures loaded in memory

    Explanation

    FIM establishes a baseline of file attributes and content hashes, then alerts when monitored files change. This helps identify unauthorized tampering with critical system or configuration files.

  53. Question 53Security Operations

    An analyst notices that events from a firewall and a domain controller appear out of order in the SIEM by several minutes. Which control should be verified first?

    1. DNS forwarder configuration
    2. SIEM rule severity thresholds
    3. NTP synchronization on the sources Correct answer.
    4. Firewall rule ordering

    Explanation

    SIEM correlation depends on consistent timestamps across log sources. Clock skew caused by missing or blocked NTP usually makes events appear out of order and can break sequence-based detections.

  54. Question 54Security Operations

    A vulnerability scanner reports no issues on a server, but a manual review finds an unpatched service. What does this represent?

    1. True negative
    2. False positive
    3. False negative Correct answer.
    4. True positive

    Explanation

    A false negative occurs when a detection control fails to identify a real issue that is present. In vulnerability scanning, this means a vulnerable service exists but the scanner did not report it.

  55. Question 55Security Operations

    What is the primary purpose of deploying a honeypot in a DMZ?

    1. To provide high availability for public web servers
    2. To lure attackers and observe their activity Correct answer.
    3. To replace the need for an intrusion prevention system
    4. To store backups of critical systems

    Explanation

    A honeypot is a decoy system with no legitimate production role, so any interaction with it is suspicious. It is used to attract attackers, collect indicators, and study techniques without exposing real assets.

  56. Question 56Security Operations

    A security team needs reliable full-duplex packet capture from a busy core switch link for incident analysis. Which approach is best?

    1. Enable syslog forwarding from the switch
    2. Use a SPAN port for all capture traffic
    3. Insert a network TAP on the link Correct answer.
    4. Collect NetFlow records from the router

    Explanation

    A network TAP passively copies all traffic on a link, including full-duplex traffic, without competing for switch resources. SPAN ports can drop packets under heavy load and may not capture all frames reliably.

  57. Question 57Security Operations

    NetFlow records show a workstation sending 8 GB to an external IP every night at 2 a.m. over TCP 443, while normal daily use is under 200 MB. What should the analyst suspect first?

    1. A scheduled backup that is failing silently
    2. A routing loop causing retransmissions
    3. Data exfiltration Correct answer.
    4. DHCP scope exhaustion on the subnet

    Explanation

    Large, recurring outbound transfers at off-hours to an external address are a common sign of data exfiltration. The use of TCP 443 can indicate an attempt to blend in with normal encrypted web traffic.

  58. Question 58Security Operations

    Which task is the best candidate for automation in a SOAR playbook?

    1. Approving a firewall change outside policy
    2. Writing the final root cause analysis
    3. Enriching alerts with threat intelligence Correct answer.
    4. Deciding whether to notify law enforcement

    Explanation

    SOAR automation works best for repeatable, low-judgment tasks such as querying threat intelligence and appending context to an alert. High-impact legal, policy, and final analytical decisions should remain with humans.

  59. Question 59Security Operations

    A threat hunter wants to test whether adversaries are using living-off-the-land binaries to download payloads. Which hypothesis is most actionable?

    1. Certutil.exe may fetch payloads from remote URLs Correct answer.
    2. Attackers may target our new firewall vendor
    3. Attackers may use any available tool at any time
    4. Attackers may eventually stop attacking

    Explanation

    An actionable hunting hypothesis is specific enough to translate into observable telemetry, such as certutil.exe command lines containing URL-related flags. It can then be tested with process creation and network logs.

  60. Question 60Security Operations

    An IDS that baselines normal traffic and alerts on deviations is using which detection method?

    1. Reputation-based detection
    2. Protocol-based detection
    3. Anomaly-based detection Correct answer.
    4. Signature-based detection

    Explanation

    Anomaly-based detection learns a baseline of normal activity and flags behavior that statistically deviates from it. This can catch novel activity but often requires tuning to control false positives.

  61. Question 61Security Operations

    Proxy logs show a user-agent string 'Mozilla/5.0 (compatible; MSIE 6.0; Windows NT 5.1)' from a Linux server making requests to a newly registered domain. What is the most likely concern?

    1. The traffic may be malware hiding as a browser Correct answer.
    2. The server is running an outdated browser version
    3. The domain is too new for DNSSEC
    4. The proxy is caching too aggressively

    Explanation

    A Linux server normally has no reason to present an old Internet Explorer user-agent. Combined with a newly registered domain, this suggests malware or an implant attempting to blend in with browser traffic.

  62. Question 62Security Operations

    Windows Security event 4624 records logon type 3. What does this indicate?

    1. A service startup
    2. An interactive console logon
    3. A Remote Desktop logon
    4. A network logon to a file share Correct answer.

    Explanation

    Logon type 3 is a network logon, commonly seen when a user or system accesses a shared folder or other network resource. Type 2 is interactive, type 5 is service, and type 10 is Remote Desktop.

  63. Question 63Security Operations

    Which Sysmon event ID records process creation with hashes and parent process information?

    1. Event ID 3
    2. Event ID 1 Correct answer.
    3. Event ID 11
    4. Event ID 7

    Explanation

    Sysmon Event ID 1 is Process Create and includes the image path, command line, user, parent process, and file hashes. It is a core data source for endpoint process analysis.

  64. Question 64Security Operations

    Two servers have the same critical vulnerability. Server A is internet-facing and processes payments; Server B is an isolated test lab. Which factor should most influence remediation order?

    1. The CVSS base score alone
    2. The number of listening network ports on each host
    3. Business criticality and exposure Correct answer.
    4. The amount of free disk space

    Explanation

    CVSS base score describes technical severity but not the business context of the asset. Remediation should prioritize systems whose compromise would have the greatest business impact and whose exposure makes exploitation more likely.

  65. Question 65Security Operations

    A critical medical device cannot be patched for a known vulnerability. Which action is the best compensating control?

    1. Isolate the device on a restricted VLAN Correct answer.
    2. Lower the CVSS score in the scanner
    3. Disable the device and accept downtime
    4. Ignore the finding because it is a medical device

    Explanation

    Compensating controls reduce risk when the primary fix is not feasible, such as restricting network access to the vulnerable device. Segmenting the device on a VLAN with strict access control limits exposure while preserving clinical function.

  66. Question 66Security Operations

    An alert shows a scheduled task created on a server that runs a Base64-encoded PowerShell command each hour. Which ATT&CK tactic is most directly represented?

    1. Discovery
    2. Credential access
    3. Persistence Correct answer.
    4. Collection

    Explanation

    Scheduled tasks are commonly used to maintain recurring execution after the initial compromise, which is a persistence technique in ATT&CK. The encoded PowerShell also supports execution, but the scheduled task itself is primarily about maintaining presence.

  67. Question 67Security Operations

    An analyst reviewing a packet capture sees a host repeatedly send TCP SYN packets to a range of destination ports, receiving RST/ACK from closed ports and SYN/ACK from a few open ports, all within seconds. What activity is indicated?

    1. A SYN flood denial of service
    2. A TCP port scan Correct answer.
    3. A normal backup transfer
    4. A DNS cache poisoning attempt

    Explanation

    Sequential SYNs to many destination ports with RST/ACK or SYN/ACK responses are the signature of TCP port scanning. The goal is to discover which services are listening on the target.

  68. Question 68Security Operations

    In the Diamond Model of Intrusion Analysis, which four features are connected by each event?

    1. Confidentiality, integrity, availability, accountability
    2. Prevention, detection, response, recovery
    3. Adversary, capability, infrastructure, victim Correct answer.
    4. Source, destination, protocol, payload

    Explanation

    The Diamond Model describes an intrusion event through four core features: adversary, capability, infrastructure, and victim. These features are connected by relationships that analysts can pivot across during intelligence analysis.

  69. Question 69Vulnerability Management

    A scanner reports a host as fully patched, but the host actually runs a vulnerable service the scanner failed to detect. What is this called?

    1. A false negative Correct answer.
    2. A true negative
    3. A false positive
    4. A true positive

    Explanation

    A false negative occurs when a scanner fails to detect a vulnerability that is actually present. A false positive is the opposite: the scanner reports a problem that does not exist.

  70. Question 70Vulnerability Management

    What does a CVE identifier represent?

    1. A unique ID for a disclosed flaw Correct answer.
    2. A vendor patch tracking number
    3. A configuration benchmark identifier
    4. A threat actor naming convention

    Explanation

    CVE identifiers are unique, standardized names assigned to publicly disclosed cybersecurity vulnerabilities so tools and teams can refer to the same flaw consistently. They are not vendor patch numbers or configuration benchmarks.

  71. Question 71Vulnerability Management

    Which action is an example of remediating a software vulnerability?

    1. Documenting the risk and continuing operations
    2. Installing the vendor patch Correct answer.
    3. Isolating the host on a segmented VLAN
    4. Blocking exploit traffic at the firewall

    Explanation

    Remediation fixes the underlying vulnerability, typically by applying the vendor patch or upgrade that removes the flaw. Blocking traffic, isolating the host, or accepting the risk are mitigation, compensating, or acceptance actions rather than remediation.

  72. Question 72Vulnerability Management

    Which scanning approach uses software installed on the host to assess it continuously, even when it is off the corporate network?

    1. Passive network monitoring
    2. Agent-based scanning Correct answer.
    3. External attack surface scanning
    4. Uncredentialed network scanning

    Explanation

    Agent-based scanning installs a small agent on the host, so the host can be assessed continuously even when it is remote or off the corporate network. Network-based methods require reachability and often credentials.

  73. Question 73Vulnerability Management

    An organization finds a vulnerability in an internal system where availability is far less important than confidentiality. Which CVSS scoring element should be adjusted to reflect this?

    1. Temporal score
    2. Exploitability sub-score
    3. Base score
    4. Environmental score Correct answer.

    Explanation

    Environmental metrics adjust the score for the organization's specific deployment, including modified impact weights for confidentiality, integrity, and availability. Base and temporal metrics do not capture the relative importance of a system's data.

  74. Question 74Vulnerability Management

    What does an EPSS score estimate?

    1. The likelihood that a scanner finding is a false positive
    2. The severity of the vulnerability on a 0-10 scale
    3. The probability of exploitation within 30 days Correct answer.
    4. The number of hosts affected by the vulnerability

    Explanation

    EPSS estimates the probability that a vulnerability will be exploited in the wild within the next 30 days. It is a predictive score, not a severity rating or an indicator of false positives.

  75. Question 75Vulnerability Management

    A vulnerability appears in the CISA Known Exploited Vulnerabilities catalog. What does this indicate?

    1. It is a vulnerability with a CVSS score above 9.0
    2. It is a vulnerability affecting only legacy systems
    3. It is known to be exploited in the wild Correct answer.
    4. It is a vulnerability fully patched by the vendor

    Explanation

    The KEV catalog lists vulnerabilities that CISA has confirmed are actively exploited in the wild. Inclusion is a strong signal to prioritize remediation regardless of CVSS score alone.

  76. Question 76Vulnerability Management

    Which SCAP component provides a standardized language for machine-readable vulnerability and configuration checks?

    1. CCE
    2. OVAL Correct answer.
    3. CVE
    4. CVSS

    Explanation

    OVAL is the SCAP language for expressing machine-readable vulnerability and configuration checks. CVE names vulnerabilities, CCE names configuration items, and CVSS scores severity.

  77. Question 77Vulnerability Management

    A production database server becomes unresponsive during a full vulnerability scan. Which change best preserves scan coverage while reducing impact?

    1. Increase scan concurrency to finish faster
    2. Schedule scanning in a maintenance window Correct answer.
    3. Run the scan uncredentialed to reduce load
    4. Exclude the database server from all future scans

    Explanation

    Scheduling scans during a maintenance window reduces business impact while preserving coverage. Excluding the host or weakening the scan creates blind spots, and increasing concurrency typically worsens the load.

  78. Question 78Vulnerability Management

    A high-severity vulnerability with a known public exploit is 45 days past its remediation SLA and remains unpatched. What should the vulnerability management team do?

    1. Escalate and apply a compensating control Correct answer.
    2. Wait for the next scheduled scan to reassess
    3. Lower the severity so the SLA no longer applies
    4. Close the finding because the SLA has passed

    Explanation

    Missed remediation SLAs for an exploited vulnerability should be escalated through the risk process, with a compensating control applied until remediation is complete. Closing, waiting, or downgrading the severity hides the risk rather than managing it.

  79. Question 79Vulnerability Management

    A scanner reports a vulnerable service on a host, but the system owner states the service is not installed. What should the analyst do first?

    1. Delete the finding to avoid noise
    2. Immediately patch the host based on the finding
    3. Verify the finding directly on the host Correct answer.
    4. Report the system owner for noncompliance

    Explanation

    The first step in triaging a disputed finding is validation: check the host directly and rescan with credentials to confirm whether the service exists. Patching or deleting before validation can waste effort or hide a real issue.

  80. Question 80Vulnerability Management

    Which type of scan compares host settings against a hardening baseline such as the CIS Benchmarks?

    1. A compliance scan Correct answer.
    2. A web application scan
    3. A threat intelligence feed
    4. A penetration test

    Explanation

    Configuration compliance scans compare host settings to a hardening baseline such as CIS Benchmarks or DISA STIGs. They focus on settings, not on exploit testing or threat data.

  81. Question 81Vulnerability Management

    Which activity best helps an organization discover internet-facing assets missing from its asset inventory?

    1. Reviewing internal DHCP logs
    2. Auditing local administrator accounts
    3. Scanning owned external IPs/domains Correct answer.
    4. Reviewing the patch management console

    Explanation

    External attack surface scanning enumerates an organization's owned IP ranges and domains from the internet, revealing exposed assets that may be missing from the inventory. Internal logs and consoles cannot discover external assets the organization does not know about.

  82. Question 82Vulnerability Management

    Which scanner type is designed to detect flaws such as SQL injection and reflected XSS in a running web application?

    1. A configuration compliance scanner
    2. A network vulnerability scanner
    3. A static code analyzer
    4. A dynamic web application scanner Correct answer.

    Explanation

    A dynamic web application scanner tests a running application by sending crafted requests to detect flaws such as SQL injection and reflected XSS. Static analyzers inspect source code without executing it.

  83. Question 83Vulnerability Management

    A CVSS v3.1 vector includes S:C. What does the Scope metric indicate?

    1. It affects only data confidentiality
    2. It can impact resources outside the component Correct answer.
    3. It requires valid credentials
    4. It requires physical access to the affected device

    Explanation

    Changed scope (S:C) means the vulnerability can affect resources beyond the security scope of the vulnerable component. Unchanged scope (S:U) means impact is confined to that component.

  84. Question 84Vulnerability Management

    Business leaders decide to keep a vulnerable legacy application running because replacement is too expensive. Which risk response is this, and what should accompany the decision?

    1. Risk avoidance by decommissioning the system
    2. Risk acceptance with formal sign-off Correct answer.
    3. Risk mitigation by applying the vendor patch
    4. Risk transference by purchasing cyber insurance

    Explanation

    Keeping a vulnerable system because replacement is too costly is risk acceptance, which should be documented with formal business sign-off and a review date. Avoidance removes the system, mitigation fixes or reduces the flaw, and transference shifts financial risk.

  85. Question 85Vulnerability Management

    A critical vulnerability cannot be patched because the vendor no longer supports the product. Which action is a compensating control?

    1. Ignoring the finding until the next scan
    2. Removing the asset from the CMDB
    3. Applying an unauthorized third-party patch
    4. Deploying a WAF rule to block the exploit Correct answer.

    Explanation

    A compensating control reduces the risk of exploitation when the vulnerability cannot be fixed directly. A WAF rule that blocks the known exploit vector is a valid compensating control, while unauthorized patches and documentation changes are not.

  86. Question 86Vulnerability Management

    A container image built from an outdated base image contains known vulnerable packages. Which practice best prevents such images from reaching production?

    1. Scanning images in CI/CD and failing critical builds Correct answer.
    2. Scanning images only after 30 days in production
    3. Relying on host antivirus to detect vulnerable packages
    4. Manually reviewing the Dockerfile once per year

    Explanation

    Scanning container images in the CI/CD pipeline and failing builds with critical findings prevents vulnerable images from being deployed. Post-deployment scanning, host antivirus, and annual manual review are too late or too infrequent.

  87. Question 87Vulnerability Management

    A scanner reports a vulnerable library inside a third-party application, even though the operating system package with the same library is fully patched. What is the most likely explanation?

    1. The OS patch also updated the bundled copy
    2. The library is not actually vulnerable
    3. The scanner is misreporting bundled libraries
    4. The application bundles its own copy of the library Correct answer.

    Explanation

    Third-party applications often ship their own copies of libraries, so patching the OS package does not update the bundled version. The application vendor must release an updated build, or the bundled library must be replaced.

  88. Question 88Vulnerability Management

    Which combination of factors best supports risk-based vulnerability prioritization?

    1. CVSS severity alone
    2. The number of findings reported by the scanner
    3. Severity, exploit evidence, and criticality Correct answer.
    4. The alphabetic order of CVE identifiers

    Explanation

    Risk-based prioritization combines intrinsic severity, evidence of exploitation (such as KEV or EPSS), and the business criticality of the affected asset. Severity alone or raw finding counts ignore exposure and business context.

  89. Question 89Vulnerability Management

    After applying a patch, what is the most reliable way to confirm the vulnerability is remediated?

    1. Wait for the next annual scan
    2. Rescan credentialed and confirm the finding is gone Correct answer.
    3. Assume the patch worked because it installed cleanly
    4. Check that the vendor website lists the fix

    Explanation

    Validation requires rescanning the host with credentials and confirming the specific finding no longer appears. A clean installation or a vendor advisory does not prove the host is actually remediated.

  90. Question 90Vulnerability Management

    Which statement best distinguishes a penetration test from a vulnerability scan?

    1. A penetration test chains flaws to show real impact Correct answer.
    2. A vulnerability scan requires no tools
    3. A penetration test only lists missing patches
    4. A vulnerability scan exploits flaws to prove impact

    Explanation

    A penetration test simulates an attacker and often chains multiple weaknesses to demonstrate business impact, while a vulnerability scan enumerates potential weaknesses. Scanners generally do not prove exploitability end to end.

  91. Question 91Vulnerability Management

    An analyst needs the most authoritative information about which product versions a vendor patch addresses. Which source should be consulted?

    1. An anonymous paste site
    2. A general cybersecurity news blog
    3. A social media post from a researcher
    4. The vendor's official security advisory Correct answer.

    Explanation

    The vendor's official security advisory is authoritative for affected versions, fixed versions, and workarounds. News blogs, social posts, and anonymous sources may be useful early signals but are not authoritative.

  92. Question 92Vulnerability Management

    Which data source is most useful for determining the business criticality of an asset during vulnerability prioritization?

    1. Configuration management database Correct answer.
    2. The scanner's plugin update log
    3. The firewall's denied connection log
    4. The DNS resolver cache

    Explanation

    The CMDB records the asset's role, owner, and business context, which are needed to weigh a finding by business criticality. Scanner logs, firewall logs, and DNS caches do not describe business value.

  93. Question 93Vulnerability Management

    In CVSS v3.1, which metric group contains values that change over time and can adjust a base score, such as the maturity of exploit code?

    1. Base
    2. Impact
    3. Temporal Correct answer.
    4. Environmental

    Explanation

    The temporal metric group adjusts the base score for factors that evolve after publication, including exploit code maturity, remediation level, and report confidence. Base metrics are intrinsic to the flaw, while environmental metrics describe the adopting organization's own deployment.

  94. Question 94Vulnerability Management

    A security feed lists the identifier CVE-2025-1337. What does this identifier uniquely describe?

    1. A publicly disclosed vulnerability Correct answer.
    2. A benchmark misconfiguration rule
    3. A threat actor campaign
    4. A vendor-specific patch release

    Explanation

    CVE identifiers are assigned to specific publicly disclosed vulnerabilities so that scanners, vendors, and analysts can refer to the same flaw consistently. They identify the flaw itself, not the fix, the configuration check, or the adversary.

  95. Question 95Vulnerability Management

    When prioritizing vulnerabilities, an analyst estimates risk by combining which two factors?

    1. Exposure and patch age
    2. Likelihood and impact Correct answer.
    3. Confidentiality and integrity
    4. Severity and vendor count

    Explanation

    Risk is conventionally expressed as the probability that a threat will exploit a weakness multiplied by the magnitude of harm if it succeeds. Severity scores are only one input into the likelihood half of that estimate.

  96. Question 96Vulnerability Management

    A legacy application cannot be patched for a known remote code execution flaw because the vendor no longer supports it. The team places the host behind a strictly enforced application-aware firewall rule. What is this an example of?

    1. Risk transfer
    2. Scan tuning
    3. Patch rollback
    4. Compensating control Correct answer.

    Explanation

    A compensating control reduces the likelihood or impact of a vulnerability when the primary remediation cannot be applied. It must be documented, tested, and paired with a formal risk acceptance for the residual exposure.

  97. Question 97Vulnerability Management

    A vulnerability is described as a zero-day. Which condition defines it?

    1. The vendor patched the flaw within one day of disclosure
    2. An exploit exists before the vendor releases a fix Correct answer.
    3. The flaw was discovered during an internal audit
    4. The flaw has a maximum CVSS base score

    Explanation

    A zero-day is exploited while the vendor still has no patch or mitigation available, so defenders have no vendor-supplied fix at the moment of attack. The term describes the absence of a remedy, not the severity of the flaw or how it was found.

  98. Question 98Vulnerability Management

    What is the primary purpose of a software bill of materials (SBOM) in vulnerability management?

    1. To record the licensing cost of each application
    2. To certify that an application is free of vulnerabilities
    3. To document the source code review findings
    4. To list the components and versions inside a product Correct answer.

    Explanation

    An SBOM enumerates the libraries, packages, and versions that compose a product, letting teams quickly determine whether a newly disclosed flaw in a dependency affects them. It supports supply chain and transitive dependency analysis.

  99. Question 99Vulnerability Management

    A team schedules full infrastructure vulnerability scans for Saturday at 02:00 rather than during business hours. What is the primary reason?

    1. Scans produce more accurate results on an idle network
    2. To limit the operational impact on production systems Correct answer.
    3. Weekend scanning is required by PCI DSS
    4. Scanners require the network to be offline to detect hosts

    Explanation

    Active scanning generates substantial traffic and consumes host resources, so organizations schedule scans when business impact is lowest and change activity is unlikely. Accuracy depends on factors such as credentials and scanner configuration, not on network idleness.

  100. Question 100Vulnerability Management

    Which action is a remediation rather than a mitigation?

    1. Applying the vendor's patch for the flaw Correct answer.
    2. Blocking inbound access to the vulnerable port
    3. Restricting access with a network ACL
    4. Adding a virtual patch at the WAF

    Explanation

    Remediation eliminates the underlying weakness, typically by patching or reconfiguring the affected component. Mitigations reduce exposure or impact while the flaw still exists in the code and must be maintained indefinitely.

  101. Question 101Vulnerability Management

    A vulnerability has a moderate CVSS base score of 6.5 but an EPSS score in the 94th percentile. How should the analyst interpret this?

    1. The vulnerability is a false positive and should be closed
    2. The flaw is likely to be exploited soon Correct answer.
    3. The flaw is confirmed exploited on this network
    4. The CVSS score must be recalculated

    Explanation

    EPSS estimates the probability that a vulnerability will be exploited in the wild within the next 30 days, ranked against all scored vulnerabilities. Pairing it with CVSS separates flaws that are likely to be attacked from those that are merely severe on paper.

  102. Question 102Vulnerability Management

    Two hosts share the same unpatched vulnerability. One is a developer sandbox and the other is the database server holding customer payment data. Which factor most directly justifies patching the database server first?

    1. Scan frequency
    2. Exploit code maturity
    3. Patch availability
    4. Asset criticality Correct answer.

    Explanation

    Prioritization combines vulnerability severity with the business value and data sensitivity of the affected asset, so identical flaws can carry very different risk. Asset criticality supplies the impact half of that calculation.

  103. Question 103Vulnerability Management

    A scanner reports a host as fully patched, but the analyst later confirms that an outdated, vulnerable service is running on it. What does this represent?

    1. A true positive
    2. A risk acceptance
    3. A false negative Correct answer.
    4. A false positive

    Explanation

    A false negative occurs when a scan fails to detect a weakness that is genuinely present, leaving a real exposure untreated and unreported. It is the inverse of a false positive, which reports a weakness that does not exist.

  104. Question 104Vulnerability Management

    What does a CIS Benchmark provide to a vulnerability management program?

    1. Consensus hardening baselines for secure configuration Correct answer.
    2. A list of exploited vulnerabilities observed in the wild
    3. A standardized format for sharing threat intelligence
    4. A scoring system for asset business value

    Explanation

    CIS Benchmarks are consensus-developed configuration baselines for operating systems, applications, and cloud services, used to find and remediate misconfigurations. They are prescriptive hardening guidance rather than exploit feeds or scoring models.

  105. Question 105Vulnerability Management

    Which role does OVAL play within the SCAP framework?

    1. It expresses system-state checks in machine-readable form Correct answer.
    2. It scores vulnerabilities using environmental metrics
    3. It assigns unique identifiers to individual configuration items
    4. It encrypts assessment results in transit

    Explanation

    OVAL provides a standardized, machine-readable language for describing system state and checks, so different tools can evaluate the same definitions consistently. SCAP bundles OVAL with other components such as CVE, CPE, CCE, and CVSS.

  106. Question 106Vulnerability Management

    A business unit cannot remediate a finding within the required SLA because the fix would break a critical interface. What is the correct next step in a governed vulnerability management program?

    1. Silently extend the due date
    2. Close the finding as a false positive
    3. Remove the asset from scan scope
    4. File a documented risk exception Correct answer.

    Explanation

    When remediation is not feasible within the SLA, the residual risk must be formally accepted by an accountable owner with compensating controls and a review date recorded. Documented exceptions preserve visibility for governance, audit, and later follow-up.

  107. Question 107Vulnerability Management

    A web application scanner crawls only the login page and reports almost no findings, even though the application has many authenticated features. What is the most likely cause?

    1. The application uses HTTPS rather than HTTP
    2. The scanner is configured with excessive request throttling
    3. The scanner is running from an untrusted network segment
    4. The scan was not configured with authentication credentials Correct answer.

    Explanation

    A crawler can only reach functionality it is permitted to access, so authenticated areas require valid session credentials or a recorded login sequence. Without them, most of the attack surface is never exercised and results are misleadingly clean.

  108. Question 108Vulnerability Management

    Which practice most effectively keeps known vulnerabilities out of production container workloads?

    1. Relying on the base image vendor to patch running containers
    2. Scanning the running host OS once per quarter
    3. Scanning images at build time and blocking noncompliant deploys Correct answer.
    4. Scanning only the container's exposed network ports

    Explanation

    Containers are immutable and short-lived, so the reliable control is to scan the image artifact early and gate deployment on the result, then rebuild from patched base images. Running containers are replaced rather than patched in place.

  109. Question 109Vulnerability Management

    Which metric best indicates whether a vulnerability management program is keeping up with remediation over time?

    1. Number of scans run per month
    2. Total number of findings in the current scan
    3. Count of assets in the inventory
    4. Median time to remediate by severity Correct answer.

    Explanation

    Time-to-remediate trends, reported per severity tier, show whether findings are being closed within SLA and whether the backlog is shrinking or growing. Raw finding counts and scan volumes measure activity rather than remediation effectiveness.

  110. Question 110Vulnerability Management

    A public proof-of-concept exploit is released for a vulnerability that previously had none. Which CVSS change occurs?

    1. The base score is recalculated
    2. The environmental score decreases
    3. The impact sub-score increases
    4. The temporal score increases Correct answer.

    Explanation

    Base metrics are intrinsic and stay fixed once published, while temporal metrics reflect the current state of exploitation and remediation. Moving from unproven to proof-of-concept raises the exploit code maturity value, which increases the temporal score.

  111. Question 111Vulnerability Management

    An analyst overlays the CISA Known Exploited Vulnerabilities catalog and vendor advisories onto scanner output. What is the primary benefit?

    1. It eliminates the need for credentialed scanning
    2. It reduces the total number of assets that must be scanned
    3. It prioritizes flaws exploited in the wild Correct answer.
    4. It converts findings into false positives

    Explanation

    Correlating findings with exploitation intelligence separates flaws that are actively attacked from those that are only theoretical, which drives remediation order. It changes prioritization, not what the scanner is able to detect.

  112. Question 112Vulnerability Management

    A CVSS v3.1 vector includes S:C, meaning Scope is Changed. What does that indicate?

    1. The attacker must first change a system configuration
    2. Impact is confined to the vulnerable component
    3. The attack must be launched from a different network segment
    4. Impact may extend to components beyond the vulnerable one Correct answer.

    Explanation

    Scope: Changed means the vulnerable component and the impacted component sit under different security authorities, so impact is assessed against the second component. Scope: Unchanged means both components share the same security authority.

  113. Question 113Vulnerability Management

    Which identifier type classifies an underlying weakness pattern, such as a buffer overflow, rather than a specific product or a single instance of a flaw?

    1. CVSS
    2. CWE Correct answer.
    3. CPE
    4. CVE

    Explanation

    CWE is a taxonomy of software weakness types, so it groups many individual vulnerabilities that share the same root cause. CVE names one specific instance, CPE names a product, and CVSS conveys severity.

  114. Question 114Vulnerability Management

    Before scanning a manufacturing network that includes programmable logic controllers, which precaution is most important?

    1. Disabling the firewall between IT and OT zones
    2. Running the scan from the corporate wireless network
    3. Increasing scan aggressiveness to finish quickly
    4. Verifying that probing cannot disrupt OT devices Correct answer.

    Explanation

    Many industrial control devices are sensitive to unexpected traffic and can fail or enter unsafe states when probed aggressively. Passive monitoring or vendor-approved active checks should be used so that availability and safety are preserved.

  115. Question 115Vulnerability Management

    An organization runs short-lived cloud instances that often terminate before the next scheduled network scan. Which approach gives the most reliable vulnerability visibility?

    1. Relying on quarterly external perimeter scans
    2. Scanning the subnet more frequently with a network appliance
    3. Increasing the scan window to 24 hours a day
    4. Installing a scanning agent that reports at boot Correct answer.

    Explanation

    Agent-based scanning runs on the host itself and can evaluate and report during an instance's brief lifetime, which scheduled network sweeps cannot guarantee. This is why agents are favored for elastic, autoscaling, and ephemeral environments.

  116. Question 116Vulnerability Management

    Which advantage does passive network monitoring offer over active vulnerability scanning on a sensitive production segment?

    1. It eliminates the need for an asset inventory
    2. It observes real traffic without injecting packets Correct answer.
    3. It can confirm exploitability of each detected flaw
    4. It discovers unpatched software by reading host registries

    Explanation

    Passive analysis mirrors traffic and builds an inventory of observed hosts, services, and protocols without sending probes that could disturb fragile systems. It cannot read local patch state or verify that a flaw is exploitable.

  117. Question 117Vulnerability Management

    Which identifier standard describes a class of software weakness, such as cross-site scripting or improper input validation, rather than one specific vulnerable product version?

    1. CVSS
    2. CVE
    3. CPE
    4. CWE Correct answer.

    Explanation

    CWE is a taxonomy of weakness types that groups recurring design and coding flaws into categories, so it is used to describe the class of defect rather than an individual occurrence in a product. CVE entries, by contrast, are assigned to specific disclosed vulnerabilities in specific products. Analysts use CWE to reason about root causes and secure-coding patterns.

  118. Question 118Vulnerability Management

    A business-critical legacy application runs on an internally exposed server, and the vendor confirms no patch exists for a known remote code execution flaw in one of its bundled libraries. The application cannot be replaced this year. Which action best aligns with vulnerability management practice?

    1. Rescan the host with exploit plugins enabled to demonstrate the risk to management
    2. Remove the finding from the scanner report so the metrics reflect only fixable issues
    3. Document a risk exception with compensating controls and a review date Correct answer.
    4. Raise the finding's severity to critical and keep it open until the application is replaced

    Explanation

    When a vulnerability cannot be remediated, the accepted practice is to record a formal exception that identifies the compensating controls in place, the residual risk owner, and a review or expiry date so the item is revisited rather than forgotten. This keeps the finding visible in risk reporting while assigning accountability. Suppressing or inflating the finding does not manage the risk.

  119. Question 119Vulnerability Management

    A manufacturing site needs to assess vulnerabilities on a segment of legacy industrial controllers that cannot tolerate active probing or authentication attempts. Which scanning approach is most appropriate?

    1. Passive monitoring of mirrored traffic to identify exposed services Correct answer.
    2. Credentialed scans run during a scheduled maintenance window
    3. Unauthenticated scans using aggressive timing templates
    4. Agent-based scans installed directly on each controller

    Explanation

    Passive monitoring inspects a copy of network traffic and builds an inventory of hosts, services, and versions without sending any packets to the fragile devices, so it yields vulnerability insight with no risk of disruption. Active techniques, whether credentialed or aggressive, can stall or crash embedded controllers that were never designed to handle scan traffic. Choose the least intrusive method that meets the assessment objective.

  120. Question 120Vulnerability Management

    An analyst reviews a vulnerability with a CVSS base score of 8.1. In the organization's deployment, exploitation requires an existing authenticated session and the component sits behind a segmented jump host. Which CVSS metric group should be used to reflect these organization-specific conditions in the score?

    1. Temporal
    2. Supplemental
    3. Base
    4. Environmental Correct answer.

    Explanation

    Environmental metrics exist precisely to adjust the base score for conditions that are specific to the consuming organization, such as modified attack vectors, mitigation controls, and the importance of the affected asset. Base metrics capture intrinsic characteristics of the vulnerability as published and are not altered by local architecture. Selecting the right metric group keeps the reported score aligned with actual exposure.

  121. Question 121Incident Response

    Which phase of the NIST incident response life cycle includes developing the incident response plan, training staff, and acquiring tools?

    1. Preparation Correct answer.
    2. Detection and analysis
    3. Containment, eradication, and recovery
    4. Post-incident activity

    Explanation

    Preparation builds incident response capability before an event occurs, including plans, training, tools, and communication paths. The other phases occur during or after an actual incident.

  122. Question 122Incident Response

    Which statement best describes a security incident?

    1. A threat to confidentiality, integrity, or availability Correct answer.
    2. A software flaw that has a published proof-of-concept exploit
    3. A documented policy that defines acceptable use of company assets
    4. A routine log entry that has no security impact

    Explanation

    A security incident is an event that actually or potentially harms confidentiality, integrity, or availability. Routine events, vulnerabilities, and policies are not incidents by themselves.

  123. Question 123Incident Response

    What is the primary purpose of a tabletop exercise in incident response?

    1. To scan the network for missing patches, weak passwords, and misconfigurations
    2. To restore production systems from verified backups after a major outage
    3. To practice roles and communications in a simulated scenario Correct answer.
    4. To test the technical accuracy of forensic imaging and hashing tools

    Explanation

    A tabletop exercise is a discussion-based simulation that tests roles, decision-making, and communication under realistic incident conditions. It is not a technical restoration, forensic validation, or scanning exercise.

  124. Question 124Incident Response

    What is the main purpose of an incident response playbook?

    1. To give predefined steps for a specific incident type Correct answer.
    2. To list every asset and its assigned owner
    3. To record the final root cause of past incidents
    4. To replace the need for analyst judgment during an incident

    Explanation

    A playbook provides predefined, repeatable steps for handling a specific incident type, such as phishing or ransomware. It standardizes actions but does not replace analyst judgment or serve as an asset inventory.

  125. Question 125Incident Response

    Which metric tracks the average time from initial detection to incident closure?

    1. Mean time to resolve (MTTR) Correct answer.
    2. Mean time to detect (MTTD)
    3. Recovery point objective (RPO)
    4. Mean time between failures (MTBF)

    Explanation

    MTTR measures elapsed time from detection or incident start through resolution. MTTD measures detection delay, MTBF measures reliability between failures, and RPO defines tolerable data loss.

  126. Question 126Incident Response

    Which evidence source best captures running processes and active network connections on a live host?

    1. A memory dump Correct answer.
    2. A full disk image
    3. A vulnerability scan report
    4. A firewall rule export

    Explanation

    Volatile memory contains the process table, network connections, loaded modules, and other live state that is lost on shutdown. A disk image captures stored data but not active runtime state.

  127. Question 127Incident Response

    What is the purpose of a write blocker during forensic acquisition?

    1. To prevent writes to the source media Correct answer.
    2. To verify that the acquired image matches the original
    3. To encrypt the forensic image at rest
    4. To speed up copying large disk images

    Explanation

    A write blocker allows read-only access so the acquisition process cannot alter the source media. Hash comparison verifies integrity after acquisition but does not physically prevent writes.

  128. Question 128Incident Response

    An organization's email system is suspected to be compromised. Which communication method should the incident response team use for coordination?

    1. A shared document in the email platform
    2. A prearranged out-of-band channel Correct answer.
    3. The affected email server's chat feature
    4. The corporate email distribution list

    Explanation

    If email is suspected compromised, the team should use a prearranged out-of-band channel such as a phone bridge or separate messaging system. Channels hosted on the affected platform may be monitored or unavailable.

  129. Question 129Incident Response

    An analyst confirms that a database server exposed customer personal data. Who should be notified first according to most incident response plans?

    1. Legal and privacy compliance teams Correct answer.
    2. The database vendor's support line
    3. The public relations vendor
    4. All affected customers directly

    Explanation

    A confirmed PII exposure triggers legal and privacy obligations, so legal and compliance teams should assess notification requirements first. Public relations, customer notices, and vendors follow based on that assessment.

  130. Question 130Incident Response

    A SIEM alert fires for suspicious PowerShell use on a workstation. What should the analyst do first?

    1. Immediately reimage the workstation
    2. Close the alert as a false positive
    3. Disable the user's account without reviewing any endpoint evidence
    4. Validate it by reviewing process and command-line evidence Correct answer.

    Explanation

    Triage should validate the alert by examining process, command-line, and related endpoint evidence before taking disruptive action. Reimaging, disabling accounts, or closing the alert prematurely can destroy evidence or miss a real compromise.

  131. Question 131Incident Response

    Which Windows logon type indicates a network logon commonly associated with SMB lateral movement?

    1. Type 3 Correct answer.
    2. Type 5
    3. Type 2
    4. Type 10

    Explanation

    Logon type 3 records a network logon, such as access to a shared folder or SMB service. Type 2 is interactive, type 5 is service, and type 10 is Remote Desktop.

  132. Question 132Incident Response

    Which Sysmon event ID records a network connection?

    1. Event ID 1
    2. Event ID 7
    3. Event ID 3 Correct answer.
    4. Event ID 11

    Explanation

    Sysmon Event ID 3 records a network connection, including source and destination details. Event ID 1 is process creation, 7 is image load, and 11 is file creation.

  133. Question 133Incident Response

    NetFlow records show a server sending 40 GB to an external IP overnight. Which additional question should the analyst answer to assess data exfiltration?

    1. Whether the external IP responds to ping
    2. Whether the server's disk is encrypted
    3. Whether the destination is an approved backup service Correct answer.
    4. Whether the server has endpoint antivirus installed and updated

    Explanation

    NetFlow provides volume and endpoint metadata but not content, so the analyst must determine whether the destination is authorized, such as a sanctioned backup service. Antivirus status, ping response, and disk encryption do not establish whether the transfer was legitimate.

  134. Question 134Incident Response

    A user reports a suspicious email. What should the analyst do first to preserve evidence?

    1. Delete the message from the user's mailbox and empty the trash
    2. Collect the original message with headers and attachments Correct answer.
    3. Reply to the sender asking for confirmation
    4. Forward the email to all staff as a warning

    Explanation

    The original message with full headers and attachments preserves sender, routing, and payload evidence for analysis and blocking. Forwarding, deleting, or replying can alter or destroy evidence.

  135. Question 135Incident Response

    Finance receives an email from the CEO requesting an urgent wire transfer. What is the best response?

    1. Verify the request using a known phone number Correct answer.
    2. Process the transfer because the display name matches the CEO
    3. Reply to the email to confirm the request
    4. Forward the email to the finance team for approval

    Explanation

    Business email compromise often spoofs display names, so the request should be verified through a separate, known channel such as a phone number on file. Replying or forwarding within email may reach the attacker or rely on a compromised channel.

  136. Question 136Incident Response

    A web service is saturated by a large volumetric DDoS attack. Which action best mitigates impact while preserving evidence?

    1. Reboot the web server repeatedly
    2. Block all inbound traffic at the host firewall
    3. Engage ISP scrubbing and capture traffic summaries Correct answer.
    4. Delete web server logs to free disk space and improve performance

    Explanation

    Upstream scrubbing filters attack traffic before it reaches the service, while traffic summaries preserve evidence. Rebooting, blocking all inbound traffic, or deleting logs can worsen availability or destroy evidence.

  137. Question 137Incident Response

    An account is confirmed compromised and the attacker is actively using it. Which containment step is most appropriate?

    1. Disable the account and revoke active sessions Correct answer.
    2. Add the account to a privileged admin group
    3. Reset the password at the next scheduled rotation
    4. Delete the account and recreate it later

    Explanation

    Disabling the account and revoking active sessions immediately cuts off attacker access, including existing tokens or sessions. Waiting for rotation, increasing privileges, or deleting the account fails to stop access or harms evidence.

  138. Question 138Incident Response

    After eradicating malware from a server, what should be done before returning it to production?

    1. Verify indicators are gone and monitor for recurrence Correct answer.
    2. Remove all logging to reduce performance impact
    3. Reconnect it to the network and close the incident
    4. Restore the server from an older image without scanning

    Explanation

    Recovery requires confirming that eradication was successful and monitoring for signs of recurrence before normal operations resume. Older unscanned images may reintroduce malware, and closing the incident early risks missing persistence.

  139. Question 139Incident Response

    Two incidents occur at the same time: one involves a single test server with no data, the other involves a payroll database with employee PII. Which factor should drive severity ranking?

    1. The physical location of the servers and their network segment
    2. The number of analysts currently on shift and their experience
    3. The age of the operating system and the patch level of each server
    4. The sensitivity of the data and the scope of exposure Correct answer.

    Explanation

    Incident severity is driven primarily by business impact, including data sensitivity and the scope of exposure. Location, staffing, and OS age may affect response but are not the main severity drivers.

  140. Question 140Incident Response

    How does a SOAR platform most improve incident response?

    1. It guarantees that no incident will recur
    2. Automating repetitive enrichment and containment tasks Correct answer.
    3. It replaces the need for a documented incident response plan
    4. It provides automatic backups of all endpoints

    Explanation

    SOAR platforms orchestrate workflows that automate repetitive enrichment, notification, and containment actions. They support a documented plan but do not replace it, guarantee prevention, or serve as endpoint backup.

  141. Question 141Incident Response

    In a file system timeline, which MAC time changes when the file content is modified?

    1. Modified time Correct answer.
    2. Access time
    3. Changed time
    4. Creation time

    Explanation

    Modified time records when file content changes. Access time records reads, changed time records metadata or MFT entry changes, and creation time records when the file was created.

  142. Question 142Incident Response

    Which Windows artifact can show that a program executed even if the executable has since been deleted?

    1. The page file
    2. The DNS cache
    3. Prefetch files Correct answer.
    4. The hosts file

    Explanation

    Prefetch files record application execution and referenced files, which can reveal that a program ran even after deletion. Hosts and DNS cache relate to name resolution, and the page file is not a reliable execution record.

  143. Question 143Incident Response

    Which registry location is commonly examined to determine which USB storage devices have been connected to a Windows system?

    1. HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
    2. HKLM\SYSTEM\CurrentControlSet\Enum\USBSTOR Correct answer.
    3. HKCU\Software\Microsoft\Windows\CurrentVersion\Run
    4. HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters

    Explanation

    The USBSTOR key enumerates USB mass storage devices that have been connected to the system. The Tcpip key holds network configuration, the Run key lists autostart programs, and Winlogon holds logon configuration.

  144. Question 144Incident Response

    During timeline reconstruction, event times from a server in UTC and a workstation in local time appear out of order. What should the analyst do?

    1. Use only the most recent events
    2. Discard all events from one of the systems
    3. Assume the server clock is correct
    4. Normalize timestamps to a common time zone Correct answer.

    Explanation

    Timeline accuracy requires converting timestamps to a common time zone, typically UTC, and accounting for possible clock skew. Discarding events or assuming one clock is correct can hide the initial compromise.

  145. Question 145Incident Response

    Which Windows logging capability records PowerShell script block content for forensic review?

    1. DNS client debug logging
    2. Security logon auditing
    3. Windows Firewall logging
    4. Script block logging Correct answer.

    Explanation

    PowerShell script block logging records script content, typically as Event ID 4104, which is valuable for investigating malicious commands. Firewall, logon, and DNS logs capture different activity and not script text.

  146. Question 146Incident Response

    Which sequence lists the phases of the NIST incident response lifecycle in the correct order?

    1. Preparation; detection and analysis; post-incident activity; containment, eradication, and recovery review
    2. Preparation; detection and analysis; containment, eradication, and recovery; post-incident activity Correct answer.
    3. Detection and analysis; preparation; containment, eradication, and recovery; post-incident activity review
    4. Preparation; containment and eradication; detection and analysis; recovery and post-incident activity review

    Explanation

    The NIST lifecycle begins with preparation, moves into detection and analysis, then containment, eradication, and recovery, and closes with post-incident activity. Containment and eradication cannot precede detection and analysis, because the scope of the compromise must be understood first.

  147. Question 147Incident Response

    In incident response terminology, which statement best describes an event?

    1. Any observable occurrence in a system or network Correct answer.
    2. A violation of an explicit security policy by a user
    3. A failed security control identified during an audit
    4. A confirmed breach involving sensitive data records

    Explanation

    An event is any observable occurrence in a system or network, such as a logon or a firewall block, and most events are benign. An incident is a specific type of event that actually or imminently threatens security policy or acceptable use.

  148. Question 148Incident Response

    What is the primary purpose of an incident response playbook?

    1. It records post-incident lessons learned for later audits and reviews
    2. It gives predefined, repeatable steps for a specific incident type Correct answer.
    3. It documents the chain of custody record for every piece of evidence collected
    4. It removes the need to maintain a standing incident response team

    Explanation

    A playbook encodes pre-approved, repeatable procedures for a defined scenario such as ransomware or business email compromise. This shortens decision time and keeps responses consistent across analysts and shifts.

  149. Question 149Incident Response

    What is the main purpose of running a tabletop exercise with the incident response team?

    1. It validates plans and role assignments through discussion Correct answer.
    2. It confirms failover of production workloads to the secondary site
    3. It measures how quickly analysts close real security tickets
    4. It satisfies the requirement to notify regulators within 72 hours

    Explanation

    A tabletop exercise is discussion-based: participants walk through a scenario and test whether the plan, roles, and decision paths hold up without touching production. It surfaces gaps in communication and authority before a real incident exposes them.

  150. Question 150Incident Response

    During a major incident, who coordinates response activities, approves containment decisions, and controls escalation?

    1. The vendor support engineer who maintains the affected platform
    2. The first analyst who observed the alert in the SIEM
    3. The incident commander assigned to the incident Correct answer.
    4. The manager of the business unit that owns the affected server

    Explanation

    The incident commander owns overall coordination, decision-making, and escalation for the incident, regardless of who found it. Technical analysts, business owners, and vendors provide input but do not hold the coordination authority.

  151. Question 151Incident Response

    A service report states the average elapsed time from incident detection until the affected service is fully restored. Which metric is being described?

    1. Mean time to repair (MTTR) Correct answer.
    2. Mean time between failures (MTBF)
    3. Mean time to acknowledge (MTTA)
    4. Mean time to detect (MTTD)

    Explanation

    MTTR measures elapsed time from detection or acknowledgement through full restoration of the service. MTTD stops at the moment of detection, and MTBF measures uptime between failures rather than recovery duration.

  152. Question 152Incident Response

    Why does an incident response plan designate a single spokesperson for communication with media and customers?

    1. It reduces the number of staff that must be available during an incident
    2. It keeps external messaging consistent and controls disclosure Correct answer.
    3. It ensures that every technical detail is shared with all employees
    4. It removes the need to document decisions taken during the response

    Explanation

    A single designated voice prevents conflicting statements and controls what information leaves the organization during a sensitive event. Technical staff can then focus on response while legal and messaging concerns are managed centrally.

  153. Question 153Incident Response

    A finance file server is confirmed compromised and is performing lateral SMB scanning, but month-end close requires the share to stay reachable from finance workstations. Which containment action is most appropriate?

    1. Leave the server online unchanged and continue monitoring until the month-end close period ends
    2. Reimage the server immediately and restore its data from the previous night's verified backup
    3. Power off the server immediately so that all active scanning and connections stop at once
    4. Restrict its network access to the finance workstations and block all other flows Correct answer.

    Explanation

    Containment should stop the spread while preserving business-critical function, so access is narrowed to only the hosts that genuinely need it. Powering off or reimaging destroys volatile evidence and disrupts the required service before the compromise is fully scoped.

  154. Question 154Incident Response

    An investigation confirms that a database of customer records was copied by an intruder. Which party should determine whether regulators and affected customers must be notified?

    1. The SOC analyst who confirmed the data was copied
    2. The first-line help desk supervisor on duty at the time
    3. The managed security service provider's shift lead
    4. Legal and privacy counsel for the organization Correct answer.

    Explanation

    Notification duties depend on legal and regulatory obligations that vary by jurisdiction and data type, so counsel makes that determination. Security's job is to provide accurate facts about what data was affected so counsel can decide.

  155. Question 155Incident Response

    At the same time, the SOC has an alert for commodity adware on an office workstation and an alert for credential-dumping behavior on a domain controller. How should the alerts be prioritized?

    1. The domain controller alert, because identity infrastructure is at risk estate-wide Correct answer.
    2. The adware, because the workstation belongs to a senior executive assistant
    3. The adware, because malware on an endpoint spreads faster than credential theft
    4. Both equally, because severity is determined only by the priority value of the alert rule

    Explanation

    Triage weighs asset criticality and the potential blast radius as well as the alert itself. Credential dumping on a domain controller threatens every account and system in the domain, far outweighing commodity adware on a single endpoint.

  156. Question 156Incident Response

    After a lengthy incident, the team finds that a noisy SIEM rule had generated hundreds of false positives per day and had hidden the actual malicious events. Which post-incident action addresses this most directly?

    1. Raise the severity of the rule so it is reviewed faster next time
    2. Increase the retention period for raw logs on the SIEM platform
    3. Tune the rule logic and add compensating detections Correct answer.
    4. Disable the SIEM rule permanently to reduce analyst workload

    Explanation

    Post-incident review should feed back into detection engineering so that noisy logic is refined while coverage of the real behavior is preserved. Simply removing or escalating the rule leaves the organization blind or overloaded rather than better defended.

  157. Question 157Incident Response

    What is the main reason for submitting a suspicious binary to a sandbox before deciding on containment?

    1. It reveals runtime behavior and network indicators safely Correct answer.
    2. It produces a court-admissible hash value of the file for evidence
    3. It removes the malware from the endpoint automatically
    4. It identifies which user downloaded the file first

    Explanation

    Dynamic analysis in an isolated environment shows what the sample actually does: files touched, registry changes, and command-and-control destinations. Those behavioral indicators support both scoping and containment decisions.

  158. Question 158Incident Response

    A cloud engineer reports that an EC2 instance is compromised and wants to terminate it immediately. What should the IR team do first to preserve evidence?

    1. Terminate the instance and rely on the cloud provider's logs
    2. Capture memory and take an EBS volume snapshot of the instance Correct answer.
    3. Detach the instance from its security group and wait for approval
    4. Reboot the instance so that the malicious process is cleared

    Explanation

    Terminating an instance destroys its memory, disk state, and local artifacts permanently. Capturing volatile memory and snapshotting the attached volumes first preserves evidence while still allowing containment afterwards.

  159. Question 159Incident Response

    A forensic examiner chooses the E01 format instead of a raw dd image for a disk acquisition. Which characteristic does E01 add to the acquired image?

    1. Faster acquisition because the disk sectors are read in parallel
    2. Guaranteed admissibility of the image in every court jurisdiction
    3. Embedded metadata and compression in the image file Correct answer.
    4. Automatic decryption of any encrypted volumes on the disk

    Explanation

    E01 is a structured container that stores case metadata alongside the image data and supports compression, unlike a flat raw image. Raw images are a byte-for-byte stream and carry no internal case information.

  160. Question 160Incident Response

    The team must determine whether a compromised server sent data to an external host over the past month, but full packet capture was never enabled. Which data source is most useful?

    1. Windows application event logs held on the server
    2. Antivirus scan history stored on the local endpoint
    3. NetFlow or other network metadata records Correct answer.
    4. The server's local DNS cache entries and host file

    Explanation

    Flow records retain source, destination, byte counts, and timing for connections, which is enough to spot large transfers to external hosts. They do not hold payload content, but they cover the long time window that packet capture cannot.

  161. Question 161Incident Response

    A compromised web server has been contained and cleaned. What should be verified before the server is returned to production?

    1. That the server has been rebooted at least twice since the cleaning was completed
    2. That the initial access vector is closed and no residual indicators remain Correct answer.
    3. That the written incident report has been signed off by the business owner of the server
    4. That the antivirus signature database on the server has been updated to the latest release

    Explanation

    Recovery should only begin once the root cause has been eliminated, otherwise the same access path allows immediate reinfection. Verification includes confirming the fix for the entry point and scanning for leftover artifacts before restoring service.

  162. Question 162Incident Response

    Ransomware has taken down the order-fulfillment platform and IT restoration is expected to take four days. Which plan lets staff keep taking orders through manual, documented workarounds in the meantime?

    1. The vulnerability management plan
    2. The disaster recovery plan
    3. The business continuity plan Correct answer.
    4. The incident response plan

    Explanation

    Business continuity focuses on keeping critical business functions operating, often through manual workarounds, while IT recovery is underway. The disaster recovery plan addresses restoring the technology itself rather than sustaining the business process.

  163. Question 163Incident Response

    An analyst wants to stop a compromised laptop from communicating with the network while still being able to push investigation queries to its agent. Which containment method fits?

    1. Unplugging the laptop's network cable
    2. Network containment from the EDR console Correct answer.
    3. Disabling the laptop's local firewall profile
    4. Shutting the laptop down and removing its disk

    Explanation

    EDR network containment blocks ordinary network traffic while keeping the agent's management channel open for queries and collection. Physically disconnecting or powering off the host severs that management path and loses volatile state.

  164. Question 164Incident Response

    Investigators confirm that an attacker forged Kerberos tickets using the krbtgt account hash. Besides rotating other compromised credentials, which remediation is required?

    1. Rejoining every domain-joined host in the estate to a newly built Active Directory forest
    2. Adding every service account in the domain to the Protected Users security group
    3. Resetting the krbtgt account password twice, with replication between resets Correct answer.
    4. Disabling Kerberos pre-authentication on all domain controllers in the site

    Explanation

    Forged tickets remain valid until the krbtgt key changes and the old keys are purged from replication, which requires two resets with domain replication in between. A single reset leaves a window in which previously issued forged tickets are still accepted.

  165. Question 165Incident Response

    Windows event logs on a compromised server show that the Security log was cleared shortly after the attacker's first logon. How should the investigator interpret and handle this?

    1. It is likely anti-forensic activity; rely on centralized or forwarded copies Correct answer.
    2. It is routine log-retention behavior on servers and can be treated as a benign event
    3. It means the incident can no longer be investigated using any available data
    4. It proves that the attacker had physical access to the server's console port

    Explanation

    Clearing the Security log immediately after initial access is a strong indicator of deliberate defense evasion rather than normal retention. Investigators then pivot to forwarded logs, SIEM copies, and other sources that the attacker could not reach locally.

  166. Question 166Incident Response

    While containing one infected workstation, an analyst finds a malicious scheduled task that also exists on several servers. What should the team do before starting mass eradication?

    1. Wait for the next scheduled antivirus scan cycle to report which hosts are affected
    2. Delete the task from the hosts identified so far and continue with the original case
    3. Sweep the estate for the task and related indicators to establish full scope Correct answer.
    4. Rebuild the hosts identified so far from a standard image and close the ticket

    Explanation

    Eradication is only reliable after the full population of affected hosts is known, otherwise the malware re-seeds from hosts that were never cleaned. A targeted sweep for the artifact and associated indicators defines that scope before remediation begins.

  167. Question 167Incident Response

    A volumetric DDoS attack is saturating the organization's internet circuit, and internal firewall rules are not reducing the inbound traffic. Which response is most appropriate?

    1. Block the attacking source addresses at the internal firewall as they are identified
    2. Disable the internet-facing service completely until the attack traffic stops
    3. Engage the ISP or a scrubbing service to filter traffic upstream Correct answer.
    4. Increase the bandwidth of the circuit so that the attack traffic can be absorbed

    Explanation

    When the circuit itself is saturated, filtering must happen upstream of the organization's link, which means ISP or scrubbing-center intervention. Local filtering cannot help because the malicious traffic has already consumed the available bandwidth.

  168. Question 168Incident Response

    An attacker used stolen credentials to reach a cloud file-sharing service and downloaded documents through its normal API. Signature-based detection produced no alerts. Which detection approach is most likely to identify this activity?

    1. Scanning the endpoint for known exploit kit payloads
    2. Baselining user behavior to flag abnormal volume or timing of access Correct answer.
    3. Matching downloaded file hashes against a threat-intelligence malware feed
    4. Blocking all access to cloud file-sharing services at the web proxy

    Explanation

    When an attacker uses valid credentials and legitimate APIs, there are no malicious files or signatures to match, so detection must rest on behavior that deviates from a user's normal pattern. Volume, timing, and location baselining exposes the anomaly.

  169. Question 169Reporting and Communication

    A security manager wants a metric that signals increasing risk before incidents occur. Which type of metric should be used?

    1. A key risk indicator Correct answer.
    2. A service level objective
    3. A mean time to remediate
    4. A key performance indicator

    Explanation

    Key risk indicators are forward-looking measures that show whether exposure is rising, so leaders can act before an incident occurs. Key performance indicators report how well an existing process is already executing and are backward-looking by comparison.

  170. Question 170Reporting and Communication

    Which content belongs in the executive summary of a penetration test report?

    1. Command syntax used during testing
    2. Business risk themes and priorities Correct answer.
    3. Full packet captures for every exploit tested
    4. Raw tool output for every finding

    Explanation

    The executive summary is written for decision-makers and should translate findings into business risk and clear priorities. Technical artifacts belong in the detailed body or appendix, not in the summary.

  171. Question 171Reporting and Communication

    Under the GDPR, within what period must a controller notify the supervisory authority of a personal data breach likely to result in a risk to data subjects?

    1. 30 days
    2. 24 hours
    3. 72 hours Correct answer.
    4. 48 hours

    Explanation

    The GDPR requires a controller to notify the supervisory authority without undue delay and, where feasible, within 72 hours of becoming aware of a qualifying personal data breach. Notification to affected data subjects follows where the breach is likely to result in high risk.

  172. Question 172Reporting and Communication

    Which metric is defined as the average elapsed time from the start of an incident until the affected service is restored?

    1. Mean time to detect
    2. Mean time between failures
    3. Dwell time
    4. Mean time to repair Correct answer.

    Explanation

    Mean time to repair measures the average elapsed time from the start of an incident until service is restored. It is a restoration measure and is distinct from detection and reliability measures.

  173. Question 173Reporting and Communication

    A threat intelligence report is marked TLP:RED. Who may the recipient share it with?

    1. Any trusted partner in the same sector
    2. Only the named recipients Correct answer.
    3. Anyone, provided the source is credited
    4. Any member of their own organization

    Explanation

    Under the traffic light protocol, TLP:RED designates information restricted to the named recipients only, with no further dissemination. Any wider sharing requires the source's explicit permission.

  174. Question 174Reporting and Communication

    Which metric best shows how much of the organization's known asset inventory has been assessed for vulnerabilities?

    1. Number of open critical findings
    2. Number of scans run per week
    3. Percentage of assets scanned Correct answer.
    4. Average CVSS score of findings

    Explanation

    Coverage measures the share of known assets that were actually assessed, which shows whether blind spots exist in the program. Finding counts and scan frequency say nothing about how much of the inventory was reached.

  175. Question 175Reporting and Communication

    What is the primary purpose of an incident escalation and notification matrix?

    1. To list approved forensic imaging tools
    2. To record the technical steps taken during containment
    3. To rank vulnerabilities by their CVSS base score
    4. To define who is contacted and when Correct answer.

    Explanation

    An escalation and notification matrix documents the contacts, triggers, and timing for informing stakeholders during an incident. It exists to make notification decisions fast and consistent under pressure.

  176. Question 176Reporting and Communication

    Which element makes a technical incident report reproducible by another analyst?

    1. A summary written for the board of directors
    2. Timestamps, log excerpts, and indicators Correct answer.
    3. A list of recommended policy changes
    4. An estimate of the incident's financial cost

    Explanation

    Reproducibility requires the evidence and context another analyst needs to repeat the analysis, such as timestamps, relevant log excerpts, and indicators. Executive summaries and cost estimates are interpretive rather than reproducible.

  177. Question 177Reporting and Communication

    A CISO must report quarterly to the board on the vulnerability management program. Which measure best communicates program effectiveness?

    1. Share of critical findings remediated within SLA Correct answer.
    2. Number of vulnerability scans scheduled by the operations team during the quarter
    3. Count of raw scanner findings exported from the vulnerability platform each month
    4. Total number of vulnerabilities detected in the quarter across all environments

    Explanation

    Boards need outcome-oriented measures tied to agreed targets, such as the share of critical findings fixed within SLA, ideally shown as a trend. Raw volume counts grow with inventory size and scanning frequency and do not indicate whether risk is being reduced.

  178. Question 178Reporting and Communication

    A scan produces 3,000 findings across 600 hosts. What is the most useful way to present them to remediation owners?

    1. Grouped by business unit and asset criticality Correct answer.
    2. A single list sorted by CVSS base score
    3. A raw export of all plugin output for each host, delivered as one spreadsheet per owner
    4. A count of findings per operating system version across the estate, updated weekly

    Explanation

    Remediation owners act on systems they are accountable for, so grouping findings by business unit and asset criticality makes ownership and priority obvious. Presenting raw or purely score-sorted data pushes the analysis back onto the reader.

  179. Question 179Reporting and Communication

    Monthly reports show a flat total vulnerability count but a steadily rising count of critical findings on internet-facing hosts. How should the analyst interpret this?

    1. The scanning tool is producing duplicate results
    2. The remediation program is fully effective
    3. Risk is increasing despite a stable backlog Correct answer.
    4. The critical findings should be excluded because the total count is unchanged

    Explanation

    A stable total can mask a shift in composition; rising critical findings on internet-facing hosts means the exposure that matters most is growing. Reports should therefore track severity and asset context alongside totals.

  180. Question 180Reporting and Communication

    A quarterly report will be shared with a wide internal audience and contains customer account numbers. What should be done before distribution?

    1. Publish it on the internal wiki with read access for all staff
    2. Redact or tokenize the account numbers Correct answer.
    3. Attach the full dataset so recipients can verify the findings
    4. Replace the report with a verbal briefing

    Explanation

    Reports should carry only the data each audience needs, and personal or account data should be masked or tokenized before wide distribution. Redaction preserves the analytical value while limiting unnecessary exposure.

  181. Question 181Reporting and Communication

    During an active incident, executives ask for updates every 30 minutes. What is the best communication approach?

    1. Silence until the root cause is confirmed and the report is finalized
    2. Short updates on impact, actions, and next milestone Correct answer.
    3. Forwarding the raw SIEM alert queue to the executive distribution list
    4. Full technical detail from the forensic logs each time a new artifact is found, so leadership stays informed of every step

    Explanation

    Executive updates during an incident should be brief, regular, and framed around business impact, current actions, and the next decision point. Detailed forensic artifacts and raw alerts slow leadership without improving their decisions.

  182. Question 182Reporting and Communication

    When reporting a newly discovered vulnerability to the affected software vendor, which practice reflects coordinated disclosure?

    1. Publishing full exploit code the same day the vendor is contacted
    2. Agreeing a remediation deadline before public details Correct answer.
    3. Sharing the details only with the vendor's competitors
    4. Withholding the finding from the vendor until a patch is released by someone else

    Explanation

    Coordinated disclosure gives the vendor a reasonable, mutually agreed window, commonly around 90 days, to remediate before details become public. Publishing exploit code immediately or holding the finding indefinitely defeats that balance.

  183. Question 183Reporting and Communication

    A business-critical application runs on an operating system the vendor no longer supports. What should the report recommend the business owner do?

    1. Close the finding because no patch exists
    2. Apply an unrelated vendor patch and mark the finding remediated, since the system is isolated from the internet
    3. Hide the finding from the report until the system is retired
    4. Accept the residual risk with compensating controls Correct answer.

    Explanation

    When a platform is end-of-life, no patch will arrive, so the finding stays open until the system is retired or replaced. The report should document compensating controls and record a formal risk acceptance by the accountable business owner.

  184. Question 184Reporting and Communication

    Which metric trend best demonstrates that a new detection capability has improved the security operations center?

    1. A falling mean time to detect incidents Correct answer.
    2. A rising number of alerts per analyst per shift
    3. An increasing volume of raw log data ingested per day
    4. A rising number of open incidents at month end

    Explanation

    Improved detection shows up as a shorter interval between an event and its discovery, so a falling mean time to detect is the direct evidence. Alert volume, open incidents, and log ingestion all rise with activity and say nothing about detection quality.

  185. Question 185Reporting and Communication

    A critical vulnerability on a payment server passes its 15-day remediation SLA without a fix. What should the report do?

    1. Delete it from the report until a patch becomes available
    2. Wait for the next quarterly cycle and re-evaluate whether the finding still exists on the host
    3. Lower its severity so that the SLA no longer applies to the finding
    4. Flag it as an SLA exception for owner action Correct answer.

    Explanation

    Reporting should surface SLA exceptions so accountable owners can approve, escalate, or fund a compensating control. Metrics that quietly drop or downgrade overdue items destroy the credibility of the report.

  186. Question 186Reporting and Communication

    A SOC shift lead needs a continuously refreshed view of open incidents and queue depth. Which reporting artifact fits best?

    1. A quarterly board presentation
    2. A real-time operational dashboard Correct answer.
    3. A post-incident after-action report
    4. An annual program report

    Explanation

    Operational decisions are made continuously, so a shift lead needs a live view of queue depth and open incidents. Periodic and retrospective reports serve planning and governance instead.

  187. Question 187Reporting and Communication

    An incident report states that a phishing email led to credential theft. Which addition best supports preventing recurrence?

    1. The names of the analysts who handled the case
    2. The total number of emails blocked that week
    3. A timeline of every alert generated by the SIEM during the investigation, with the full text of each rule
    4. The control gaps that allowed the logon Correct answer.

    Explanation

    Prevention depends on identifying the control failures that allowed the attack to succeed, such as missing multifactor authentication or inadequate filtering. Naming individuals or listing volumes does not change future outcomes.

  188. Question 188Reporting and Communication

    An investigation suggests an employee in finance is exfiltrating data. Who should receive the interim findings?

    1. The entire security team, posted in the team chat channel
    2. All staff in the finance department so they can watch for anomalies
    3. Legal counsel and a limited need-to-know group Correct answer.
    4. The company's external marketing agency, for reputation planning

    Explanation

    Suspected insider cases are handled on a strict need-to-know basis, typically with legal counsel directing the investigation to preserve privilege and avoid tipping off the subject. Broad internal sharing risks evidence destruction and legal exposure.

  189. Question 189Reporting and Communication

    An industry benchmark shows the organization has more critical vulnerabilities than the median, but it patches faster than the median. What is the most accurate conclusion?

    1. Exposure is higher but response is above average Correct answer.
    2. The organization is failing because its finding count exceeds the median
    3. The organization should report only the patching metric to stakeholders to avoid confusion, since the finding count is unfavorable
    4. The benchmark is invalid because patching speed and finding counts cannot both be measured in the same program

    Explanation

    External benchmarks compare counts that are heavily influenced by inventory size and scan frequency, while remediation speed reflects program execution. The correct reading combines both measures rather than choosing the flattering one.

  190. Question 190Reporting and Communication

    Two findings have equal CVSS base scores: one is on an isolated test host, the other on an internet-facing server holding regulated data. How should the report rank them?

    1. The test host ranks higher because isolation prevents detection
    2. Neither should be ranked until the vendor publishes a patch for both findings, since remediation cannot begin sooner
    3. Equally, because the CVSS base score is identical
    4. The regulated-data server ranks higher Correct answer.

    Explanation

    Risk ranking combines technical severity with asset context such as exposure, data sensitivity, and business function. Identical base scores therefore produce different priorities in a report.

  191. Question 191Reporting and Communication

    A team marks a critical finding as remediated after applying a patch. What should the closure report include to substantiate that claim?

    1. A verbal confirmation from the system owner
    2. A rescan or retest showing the finding is gone Correct answer.
    3. A note that the patch was released by the vendor and that the risk should therefore be considered addressed from the release date onward
    4. The change ticket number alone

    Explanation

    Closure should rest on evidence that the finding no longer reproduces, which normally means re-scanning or retesting the affected asset. Assertions and documentation alone do not demonstrate remediation.

  192. Question 192Reporting and Communication

    External counsel asks the security team to conduct a forensic review related to pending litigation. How should the team handle reporting?

    1. Post the findings to the internal incident wiki for transparency
    2. Publish findings in the normal monthly security report
    3. Send raw findings directly to the opposing party's counsel
    4. Route findings through counsel under privilege Correct answer.

    Explanation

    When counsel directs an investigation in anticipation of litigation, findings are routed through counsel so attorney-client privilege and work-product protections can apply. Ordinary reporting channels can waive those protections and expose the material.

  193. Question 193Reporting and Communication

    A threat intelligence report includes a confidence rating for each finding. Why does this matter to the recipients?

    1. It signals how much weight to give each finding Correct answer.
    2. It determines the severity score that the vulnerability scanner assigns to the affected asset
    3. It replaces the need for sourcing information because the rating itself conveys evidentiary strength
    4. It guarantees the finding is accurate enough to build a blocking rule without validation

    Explanation

    Confidence ratings tell recipients how much reliance to place on each finding, so they can prioritize validation and response effort. Confidence is separate from severity and does not remove the need for sourcing or validation.

  194. Question 194Reporting and Communication

    A threat intelligence report received from a partner is marked TLP:RED. What does this marking require of the recipient?

    1. The content may be shared with anyone in the recipient's sector.
    2. The content may be published once it is 24 hours old.
    3. The content may be shared only with government agencies.
    4. The content is limited to the named recipients only. Correct answer.

    Explanation

    TLP:RED is the most restrictive marking: dissemination is confined to the specific individuals named or present when the information was exchanged. Recipients may not forward it further, even inside their own organization, without the source's explicit permission.

  195. Question 195Reporting and Communication

    A CSIRT must brief the board of directors on a recent breach. Which content is most appropriate for that briefing?

    1. Business impact, current status, and decisions needed. Correct answer.
    2. The full YARA rule set used to scan endpoints for the malware.
    3. Raw log excerpts of the attacker's command-and-control traffic.
    4. A packet capture showing the initial exploitation of the server.

    Explanation

    Executive audiences need to understand impact, current state, and the decisions or resources they must approve, so briefings are framed in business terms. Technical artifacts belong in the analyst-level report or an appendix and obscure the risk information leadership must act on.

  196. Question 196Reporting and Communication

    An analyst at an EU-based company confirms at 09:00 on Monday that attackers exfiltrated a database of customer personal data. Under GDPR, when must the supervisory authority be notified?

    1. Within 30 days, once the forensic investigation is complete.
    2. Without undue delay and within 72 hours of awareness. Correct answer.
    3. Within 24 hours of confirming the exfiltration.
    4. Only after affected customers have been notified first.

    Explanation

    GDPR Article 33 requires notification to the supervisory authority without undue delay and, where feasible, within 72 hours of the controller becoming aware of the breach. Completion of a full forensic report is not a precondition for that notification.

  197. Question 197Reporting and Communication

    A vulnerability management lead must show leadership whether remediation commitments are being met. Which metric best serves that purpose?

    1. Number of authenticated scans completed per month
    2. Total count of vulnerabilities detected this quarter
    3. Percentage of critical findings remediated within SLA Correct answer.
    4. Average CVSS base score of all currently open findings

    Explanation

    SLA compliance measures outcomes against an agreed commitment, so it shows whether risk is actually being reduced on schedule and can be compared across reporting periods. Raw counts, scan volumes, and average scores describe activity or inventory rather than whether commitments were honored.

  198. Question 198Reporting and Communication

    Midway through an incident, analysts suspect the corporate email service is attacker-controlled. How should the incident commander coordinate the response team?

    1. Use the pre-agreed out-of-band channel, e.g., a phone bridge. Correct answer.
    2. Post updates in the company-wide chat channel used by all staff.
    3. Continue using email but encrypt every message with S/MIME.
    4. Wait for email to be restored before sharing further updates.

    Explanation

    The communication plan should name an out-of-band channel that does not depend on potentially compromised infrastructure, so coordination survives even if the attacker is reading or altering messages. Encrypting traffic does not help when the endpoint or mailbox itself is under attacker control.

  199. Question 199Reporting and Communication

    Reporters begin calling the security desk while an incident is still being contained. What is the correct handling of these inquiries?

    1. Confirm the incident but withhold the names of affected systems.
    2. Provide the reporters with the investigating analyst's notes.
    3. Refer all inquiries to the designated spokesperson. Correct answer.
    4. Decline to respond and state that no incident occurred.

    Explanation

    The crisis communication plan routes external inquiries to a trained spokesperson so a single approved message reaches the public. Analysts who confirm, deny, or speculate create legal and reputational exposure and may contradict later official statements.

  200. Question 200Reporting and Communication

    A penetration test rates a payment application as critically vulnerable, but the application owner says a WAF rule makes exploitation impossible and asks the analyst to downgrade the finding. What is the best action?

    1. Escalate directly to the regulator as a reportable breach.
    2. Rescan the application until the finding no longer appears.
    3. Validate the WAF rule, then document risk acceptance. Correct answer.
    4. Downgrade the finding because the owner accepts the risk.

    Explanation

    A compensating control can reduce residual risk, but only after the analyst verifies that it actually blocks the tested attack path. The agreed decision must then be recorded as a formal risk acceptance so accountability is traceable if the control later fails or is disabled.

CySA+ flashcards

32 cards. Read the term and the definition here. The deck at the top of this page is optional.

SIEM
A centralized platform that ingests logs from many sources, normalizes and correlates events, and alerts when activity matches detection rules.
MITRE ATT&CK
A knowledge base of adversary tactics (goals) and techniques (methods) built from real-world observations, used to map detections and prioritize threat hunting.
Cyber Kill Chain
A seven-phase intrusion model: reconnaissance, weaponization, delivery, exploitation, installation, command and control, and actions on objectives.
Windows Event ID 4625
Records a failed logon attempt on Windows; repeated 4625 events from one source can indicate brute-force or password-spray activity.
SPF
Sender Policy Framework: a DNS TXT record listing IP addresses authorized to send mail for a domain, checked by receivers against the envelope sender.
DMARC
A policy built on SPF and DKIM that tells receivers how to handle failing mail (none, quarantine, or reject) and where to send aggregate reports.
EDR
Endpoint detection and response: an agent that records host telemetry, detects malicious behavior, and supports response actions such as host isolation and process termination.
Threat hunting
A proactive, hypothesis-driven search through telemetry for threats that existing detections missed; it is analyst-initiated rather than alert-driven.
CVSS
An open framework that scores vulnerability severity from 0 to 10 using base, temporal, and environmental metrics; the base score combines exploitability and impact.
CVSS severity ranges
0.0 none; 0.1–3.9 low; 4.0–6.9 medium; 7.0–8.9 high; 9.0–10.0 critical. These bands are used to set remediation SLAs.
EPSS
Exploit Prediction Scoring System: a 0–1 score estimating the probability that a vulnerability will be exploited in the wild within the next 30 days.
CISA KEV
Known Exploited Vulnerabilities catalog: a list of CVEs with confirmed in-the-wild exploitation; US federal agencies must remediate listed items by the due date.
CVE
A unique public identifier for a specific vulnerability, formatted CVE-YYYY-NNNN and assigned by a CVE Numbering Authority.
CWE
A taxonomy of software weakness types, such as CWE-79 for cross-site scripting, describing root-cause classes rather than individual vulnerabilities.
Credentialed scan
An authenticated vulnerability scan that logs into hosts, enabling deeper configuration and patch inventory with fewer false positives than an unauthenticated scan.
Compensating control
An alternative safeguard that reduces risk when a vulnerability cannot be patched, such as a WAF, network segmentation, virtual patching, or disabling the vulnerable service.
NIST IR phases
Preparation; Detection and Analysis; Containment, Eradication, and Recovery; Post-Incident Activity - the four phases in NIST SP 800-61.
Order of volatility
Evidence collection priority from most to least volatile: CPU registers and cache, RAM and swap, network state, disk, logs, and backups.
Chain of custody
A documented record of who collected, handled, and transferred evidence, when and why, including cryptographic hashes that prove the evidence was not altered.
Containment
Limiting incident spread through actions such as isolating hosts, disabling accounts, blocking IPs, segmenting networks, or revoking tokens, while balancing business impact.
Eradication
Removing the root cause of an incident: deleting malware, eliminating persistence, patching the exploited vulnerability, and resetting compromised credentials before recovery.
Tabletop exercise
A discussion-based rehearsal of a simulated incident with stakeholders, used to test roles, decision-making, communication, and plan gaps without production impact.
GDPR breach notification
Requires notifying the supervisory authority within 72 hours of becoming aware of a personal data breach, unless it is unlikely to risk individuals' rights.
Lessons learned
A post-incident review that identifies what worked and what failed, producing corrective actions and updates to the incident response plan.
MTTD
Mean Time to Detect: the average time from an incident's occurrence to its detection, calculated as total detection time divided by the number of incidents.
MTTR
Mean Time to Respond or Recover: the average time to contain and remediate incidents, calculated as total response time divided by incident count.
Executive summary
A non-technical report section covering business impact, risk, and decisions required, written for leadership without raw logs or deep technical jargon.
Risk register
A living record of identified risks with likelihood, impact, score, owner, treatment option, and current status, reviewed on a defined cadence.
PCI DSS
A payment card industry standard that requires controls for cardholder data, including quarterly external vulnerability scans by an approved scanning vendor and annual penetration testing.
Data classification
Labeling data by sensitivity, commonly public, internal, confidential, and restricted, to determine handling, encryption, retention, and reporting requirements.
Communication plan
Defines stakeholders, message owners, approved channels, update cadence, and escalation thresholds for incident and vulnerability reporting.
Post-incident report
Documents the incident timeline, root cause, impact, evidence, containment actions, and corrective actions, tailored in detail to each audience.

CySA+ study guide

Security Operations

Security Operations

Security Operations questions on the CySA+ exam test whether you can say what a given control actually does, not whether you recognize a product name. Start with the detection stack: host-based telemetry (HIDS/EDR agents collecting process, file-integrity, registry, and command-line data) versus network-based telemetry (NIDS/NIPS signatures, flow analysis, full packet capture). Know the plumbing - syslog and its severity levels, SNMP traps, NetFlow/IPFIX versus full pcap, and the difference between a SPAN/mirror port and a physical network TAP. A hardware TAP is passive and lossless; a SPAN port can be oversubscribed and silently drop frames, which is a favorite exam distinction.

Expect items on indicator types: atomic (IP address, file hash, domain - trivial for an attacker to rotate), computed (a regex or byte pattern in a URI), and behavioral (a process spawning an encoded PowerShell command). Atomic indicators are cheap to change, so behavioral, TTP-based detection outlasts them.

Email and network hardening appear constantly: SPF authorizes sending IPs for a domain, DKIM cryptographically signs headers and body, and DMARC sets policy plus alignment and generates reports on top of the first two. Mixing these up loses the item.

Other recurring topics: honeypots (low vs. high interaction), sandboxing, DLP, NAC, segmentation and zero trust, TLS inspection, and SOAR automation for tier-1 triage. Automation trap: a playbook that auto-blocks on a single low-fidelity alert creates outages - enrich first, then act.

Worked example. A syslog message arrives with severity 5. Syslog runs 0 (emergency) to 7 (debug), and lower numbers are more severe. So 5 is "notice": notable but normal. Severity 2 would be critical. Candidates routinely invert this scale.

Vulnerability Management

Vulnerability Management

Vulnerability management items are mostly about scoping and interpretation: what the tool actually measured, and what the number actually means.

First, identify. Asset inventory and attack-surface mapping come before scanning - you cannot claim coverage for hosts you never enumerated. Know credentialed (authenticated) versus non-credentialed scanning: credentialed scans read installed packages, registry keys, and patch levels, producing far fewer false positives, but require a properly scoped service account. Agent-based scanning reaches roaming laptops and cloud instances a network scanner never sees. Distinguish vulnerability scanning from penetration testing (a scanner reports; a pentester chains exploits) and from compliance/baseline scanning (checking hosts against a defined configuration standard such as SCAP or STIG content), which is not the same as a full vulnerability assessment.

Second, interpret severity. CVSS is a severity score, not a risk score - it carries no asset value, exposure, or data sensitivity. Base metrics are intrinsic; temporal metrics reflect exploit maturity and remediation level; environmental metrics let you adjust for your own deployment. Scope-changed vectors (S:C) are a common trap because they alter how the base formula is applied. Bands: 0.0 none, 0.1–3.9 low, 4.0–6.9 medium, 7.0–8.9 high, 9.0–10.0 critical. EPSS estimates near-term exploitation probability; use it with CVSS and asset criticality instead of triaging on base score alone.

Third, respond: remediate (patch), mitigate (compensating control), transfer, or formally accept. Validate findings before mass action - scanners produce both false positives (flagging a patched host) and false negatives (missing a vulnerable one).

Worked example. A scanner reports CVSS 9.8 on an internet-facing VPN appliance and 9.8 on an isolated lab printer. Identical base scores, wildly different risk. Rule of thumb: CVSS tells you how bad the flaw is; risk is that severity filtered through exposure, criticality, and exploitation likelihood (EPSS or CISA KEV).

Incident Response

Incident Response

The incident response domain rewards knowing the process order and what evidence you may destroy at each step. The canonical lifecycle: Preparation → Detection/Identification → Containment → Eradication → Recovery → Post-incident activity (lessons learned). Containment precedes eradication, and containment is often temporary - isolate the host, sinkhole the domain, disable the account, block the hash - before full eradication such as reimaging, patching, and removing persistence.

Evidence handling is heavily tested. Preserve, don't "clean." Never power off a suspected compromised host to stop malware: pulling the network cable or disabling the switch port preserves volatile memory and logs while limiting spread, and that is almost always the intended answer. Follow the order of volatility: CPU registers and cache → RAM → swap/pagefile → network state (ARP, connections) → running processes and temp files → disk → remote logs → backups and archives. Capture the most volatile first. Use write blockers, hash images before and after acquisition, and record every handoff on a chain-of-custody form with who, what, when, and why.

Triage and severity classification drive escalation. Know which incidents demand legal, HR, or law-enforcement involvement: insider threat, exposure of PII or PHI, and any suspected criminal activity. Communication plans define who speaks to whom, on what cadence, and who is authorized to speak to media and regulators - engineers do not notify the press.

Traps: confusing a containment action with an eradication action, assuming "delete the file" is remediation, skipping validation during recovery, and treating lessons learned as optional. Tabletop exercises are a Preparation activity, not a post-incident one.

Worked example. An analyst finds ransomware actively encrypting a file server. The best immediate action is to isolate the host from the network at the switch - not shut it down, and not start deleting encrypted files - because isolation limits lateral spread while preserving memory and logs for root-cause analysis.

Reporting and Communication

Reporting and Communication

This domain tests whether you can translate technical findings for three audiences: executives (risk, cost, business impact), operations (what to fix and in what order), and legal/regulators (obligations and deadlines). The most common error is audience mismatch - a forty-page packet-capture analysis is not an executive summary, and a one-line "we patched it" is not a compliance record.

Know the contents of an incident report: executive summary, timeline with timestamps and time zone, scope and impact (systems, data, customers), root cause, indicators of compromise, actions taken, current status, lessons learned, and prioritized recommendations. Vulnerability reporting should include scan scope and coverage, counts by severity, aging and trend over time, exceptions and accepted risk, and performance against remediation SLAs.

Metrics are frequently tested. MTTD is time to detect (incident start to detection), MTTA is time to acknowledge, and MTTR is time to respond or remediate - usually detection to recovery. Definitions vary by organization, so the correct exam answer is the conceptually right one: detection speed versus resolution speed. Also expect patch compliance rate, scan coverage percentage, false-positive rate, and count of overdue critical findings.

Compliance deadlines are worth memorizing: GDPR requires notifying the supervisory authority within 72 hours of becoming aware of a personal data breach, with affected individuals notified without undue delay where there is high risk. Breach-notification laws, PCI DSS, HIPAA, and contractual SLAs differ - legal counsel owns the determination, not the SOC analyst.

Data classification governs sharing: label and handle PII, PHI, and confidential material per policy, and redact sensitive artifacts in reports.

Worked example. Malware first appears at 09:00, the SOC alerts at 09:45, and the host is clean and back in service at 12:30. MTTD = 45 minutes. MTTR measured from detection = 2 h 45 m; measured from incident start = 3 h 30 m. Always state your definition, because the number changes.

CySA+ cheat sheet

Quick reference

Security Operations

  • MITRE ATT&CK tactics in order: Reconnaissance, Resource Development, Initial Access, Execution, Persistence, Privilege Escalation, Defense Evasion, Credential Access, Discovery, Lateral Movement, Collection, Command and Control, Exfiltration, Impact.

  • Cyber Kill Chain phases: Reconnaissance → Weaponization → Delivery → Exploitation → Installation → Command and Control → Actions on Objectives.

  • Windows logon events: 4624 = successful logon; 4625 = failed logon; 4648 = explicit credential use; 4672 = special privileges assigned; 4720 = account created; 7045 = service installed.

  • Linux authentication logs: /var/log/auth.log on Debian-based systems or /var/log/secure on RHEL-based systems; auditd provides syscall-level auditing.

  • SPF authorizes sending IPs; DKIM signs headers and body with a domain key; DMARC aligns SPF/DKIM and sets p=none, p=quarantine, or p=reject with reporting addresses.

  • Order of volatility (RFC 3227): CPU registers and cache > RAM and swap > network state > disk > logs > backups; collect most volatile first.

  • IDS detection methods: signature-based matches known patterns (low false positives, misses novel attacks); anomaly-based baselines normal behavior and flags deviations (higher false positives).

  • IoCs are artifacts such as hashes, IPs, and domains; TTPs are adversary behaviors. TTP-based detection remains effective longer than IOC-based detection.

Quick reference

Vulnerability Management

  • CVSS v3.1 base score ranges: 0.0 none; 0.1–3.9 low; 4.0–6.9 medium; 7.0–8.9 high; 9.0–10.0 critical.

  • CVSS base metrics: Attack Vector, Attack Complexity, Privileges Required, User Interaction, Scope, Confidentiality, Integrity, Availability.

  • EPSS outputs a 0–1 probability of exploitation within 30 days; higher EPSS combined with a CISA KEV listing indicates priority remediation.

  • CISA KEV = confirmed known exploited vulnerabilities; CVE = specific vulnerability identifier; CWE = weakness class; CPE = product naming convention.

  • Risk = likelihood × impact; remediation priority combines severity, exploitability (EPSS/KEV), asset criticality, and exposure.

  • Credentialed scans authenticate to hosts for deeper inventory and fewer false positives; uncredentialed scans see only network-reachable services.

  • Scan modes: active sends probes and can disrupt fragile systems; passive observes traffic without sending packets; agent-based runs locally on the host.

  • Patch workflow: inventory → scan → prioritize → test → approve → deploy → verify → rescan.

  • Compensating controls when patching is not possible: WAF, network segmentation, virtual patching, disabling the vulnerable service, or enforcing MFA.

Quick reference

Incident Response

  • NIST SP 800-61 phases: Preparation; Detection and Analysis; Containment, Eradication, and Recovery; Post-Incident Activity.

  • PICERL sequence: Preparation, Identification, Containment, Eradication, Recovery, Lessons Learned.

  • Order of volatility for evidence: CPU/cache → RAM/swap → network state → disk → logs → backups; hash evidence at collection with SHA-256.

  • Containment options: isolate host via EDR, disable account, block IP/domain, segment VLAN, revoke tokens; power off only if volatile data is not needed.

  • Eradication removes the root cause (malware, persistence, exploited vulnerability); recovery restores from known-good state and monitors for recurrence.

  • Chain-of-custody record fields: evidence ID, description, collector, date/time, location, hash, and transfer log.

  • Breach notification timelines: GDPR 72 hours to supervisory authority; HIPAA 60 days from discovery; SEC material incident 4 business days.

  • Severity decision inputs: data sensitivity, number of affected hosts, business criticality, active versus contained status, and regulatory scope.

Quick reference

Reporting and Communication

  • MTTD = total detection time ÷ number of incidents; MTTR = total response or recovery time ÷ number of incidents.

  • Report audiences: executives need business impact and decisions; technical teams need timeline, IOCs, and remediation steps; legal/regulatory need scope and notification status.

  • Post-incident report contents: executive summary, timeline, root cause, impact, evidence, containment actions, lessons learned, corrective actions.

  • Metrics: MTTD, MTTR, MTBF, SLA compliance, false positive rate, patch latency, vulnerability reopen rate.

  • Regulatory mapping: GDPR (personal data, 72 hours), HIPAA (PHI, 60 days), PCI DSS (card data, quarterly ASV scans), SOX (financial controls).

  • Data classification tiers commonly: public, internal, confidential, restricted; classification drives handling, encryption, and reporting requirements.

  • Communication plan defines stakeholders, message owners, approved channels, update cadence, and escalation thresholds.

  • Risk register fields: risk ID, description, likelihood, impact, score, owner, treatment (accept/mitigate/transfer/avoid), status.

CySA+ key terms

SIEM

A platform that collects and correlates log and event data from many sources so analysts can detect suspicious patterns, investigate alerts, and keep searchable records for compliance.

Related: SOAR, EDR, Threat hunting
SOAR

Software that automates routine security tasks and coordinates separate tools through playbooks, letting analysts respond to alerts faster and more consistently than manual handling alone.

Related: SIEM, Playbook
EDR

Endpoint detection and response software on hosts that records process and file activity, flags malicious behavior, and can isolate or investigate a compromised machine remotely.

Related: SIEM, Threat hunting
UEBA

Analytics that model normal behavior for users and devices, then surface deviations such as unusual logon times or data access that may indicate a compromised account or insider misuse.

Related: SIEM, Threat hunting
NetFlow

Summarized metadata about network conversations, including source, destination, ports, and byte counts, used to spot unusual traffic patterns without capturing full packet contents.

Related: Network segmentation, SIEM
Honeypot

A decoy system or service placed on the network to attract attackers, alert defenders to unauthorized activity, and reveal tactics without exposing real production assets.

Related: Threat hunting, DNS sinkhole
DNS sinkhole

A control that redirects queries for known malicious domains to a harmless internal address, blocking command-and-control traffic and revealing infected hosts that keep trying to resolve them.

Related: Honeypot, SIEM
Threat hunting

A proactive, hypothesis-driven search through telemetry for attacker activity that existing alerts missed, rather than waiting for a detection to fire.

Related: MITRE ATT&CK, EDR, SIEM
MITRE ATT&CK

A public knowledge base of adversary tactics and techniques organized by attacker goal, used to map detections, find coverage gaps, and describe intrusions in shared language.

Related: Threat hunting, STIX/TAXII
STIX/TAXII

STIX is a structured format for describing threat indicators, and TAXII is the transport protocol used to exchange those descriptions automatically between security platforms and intelligence providers.

Related: MITRE ATT&CK, SIEM
Network segmentation

Dividing a network into smaller zones with controlled traffic between them, which limits how far an intruder can move and reduces the impact of a compromise.

Related: NetFlow, Containment
Vulnerability scan

An automated assessment that compares systems against known weakness signatures and configuration checks, producing findings that still need validation and prioritization before remediation.

Related: Credentialed scan, False positive (scan), CVSS
Credentialed scan

A scan that logs into each host with read-only credentials, giving deeper visibility into installed software and missing patches than an external, unauthenticated view can provide.

Related: Vulnerability scan, Patch management
CVSS

A standardized scoring system that rates vulnerability severity using metrics such as attack vector, complexity, and impact, producing a base score from zero to ten.

Related: CVE, EPSS
CVE

A unique public identifier assigned to a specific disclosed vulnerability, allowing vendors, scanners, and analysts to refer to the same flaw consistently.

Related: CVSS, Vulnerability scan
EPSS

A data-driven estimate of the probability that a given vulnerability will be exploited in the wild within the next 30 days, used to help rank remediation work.

Related: CVSS, Patch management
False positive (scan)

A finding that reports a weakness which does not actually exist on the system, often caused by version mismatches or incomplete detection logic, and which should be verified first.

Related: Vulnerability scan, Credentialed scan
Asset inventory

An authoritative record of hardware, software, and data assets with owners and criticality, forming the scope that scanning and vulnerability management depend on.

Related: Vulnerability scan, Risk register
Attack surface

The total set of entry points and exposed services an adversary could use to reach a system, including internet-facing hosts, APIs, remote access, and user endpoints.

Related: Vulnerability scan, Network segmentation
Compensating control

An alternative safeguard that reduces risk when a vulnerability cannot be patched directly, such as isolating a legacy host behind a firewall or adding extra monitoring.

Related: Patch management, Risk register, Network segmentation
Patch management

The process of testing, approving, deploying, and verifying software updates across assets on a schedule, closing known vulnerabilities before attackers can use them.

Related: Vulnerability scan, EPSS, Compensating control
Penetration test

An authorized, goal-oriented attack simulation that chains weaknesses together to show real business impact, differing from a scan because humans validate and exploit findings.

Related: Vulnerability scan, Attack surface
Incident response plan

A documented set of roles, procedures, and communication paths that guides an organization through detecting, containing, eradicating, and recovering from a security incident.

Related: Containment, Eradication, Playbook
Containment

The response phase where the spread of an incident is limited by isolating hosts, blocking traffic, or disabling accounts while evidence and business needs are considered.

Related: Eradication, Network segmentation, Incident response plan
Eradication

Removing the root cause of an incident, such as deleting malware, closing the exploited vulnerability, and resetting compromised credentials, before recovery begins.

Related: Containment, Patch management
Lessons learned

A structured post-incident review that examines what happened, how well response worked, and which detection, process, or control changes should follow.

Related: Incident response plan, Executive summary
Chain of custody

A documented, unbroken record of who collected, handled, and stored evidence and when, supporting its integrity if findings are used in legal or disciplinary proceedings.

Related: Forensic image, Order of volatility
Order of volatility

A guideline for collecting the most perishable evidence first, such as memory and active network connections, before slower-changing data like disks and backups.

Related: Forensic image, Chain of custody
Forensic image

A bit-for-bit copy of a storage device or memory space, verified by hash, that preserves evidence while allowing analysis without altering the original.

Related: Chain of custody, Order of volatility
Playbook

A predefined, step-by-step procedure for handling a specific type of incident or alert, giving responders consistent actions and decision points under pressure.

Related: Incident response plan, SOAR, Containment
Tabletop exercise

A discussion-based rehearsal in which stakeholders walk through a simulated incident to test plans, roles, and communications without touching production systems.

Related: Incident response plan, Lessons learned
Executive summary

A short, nontechnical opening section of a report that states what happened, the business impact, and the recommended actions for senior decision makers.

Related: Lessons learned, Risk register
MTTD

The average time between an incident actually occurring and being detected, a key metric that shows how well monitoring and alerting perform.

Related: SIEM, MTTR
MTTR

The average time taken to fix a vulnerability or restore normal service after an incident, used to gauge response efficiency and set service targets.

Related: MTTD, SLA, Patch management
SLA

A formal agreement defining expected service levels, such as response times or remediation deadlines, against which security and IT performance is measured and reported.

Related: MTTR, Risk register
Risk register

A living log of identified risks with owners, likelihood, impact, and treatment status, used to track and communicate decisions consistently across the organization.

Related: Compensating control, Executive summary, SLA
Breach notification

The legal or contractual duty to inform regulators, customers, or partners within set timeframes when personal or sensitive data is confirmed exposed.

Related: Data classification, Incident response plan
Data classification

Labeling information by sensitivity and handling requirements so controls, access, and reporting are applied consistently to protect the most valuable data.

Related: Breach notification, Risk register

CySA+ study plan

8 weeks · About 7 hours per week

Week 1

Security Operations

  • Map every Domain 1 objective to a one-page personal note and flag gaps in logging and network telemetry coverage

  • Stand up a free SIEM or log-analysis lab and ingest at least three distinct log sources

  • Write five working correlation queries that detect brute-force authentication, port scanning, and anomalous outbound traffic

  • Reconstruct from memory the telemetry-to-tool mapping across flow data, packet capture, proxy logs, and DNS logs

Your checkpoint

A Domain 1 lab notebook containing five tested detection queries and a log-source coverage table

Week 2

Security Operations

  • Compare agent-based and agentless endpoint telemetry and select the right approach for three given scenarios

  • Build an IOC-matching workflow against a threat intel feed and assign a confidence rating to each indicator

  • Rank identity and access monitoring controls by detection value, including MFA anomalies, impossible travel, and privilege escalation

  • Walk through two SOAR playbooks and identify which manual steps are candidates for automation

Your checkpoint

A one-page threat-intel-to-detection pipeline diagram plus twenty flashcards covering endpoint, identity, and automation objectives

Week 3

Vulnerability Management

  • Differentiate credentialed from non-credentialed scanning and justify a scan mode choice for three scenarios

  • Score ten sample findings with CVSS v3.1 base metrics and defend each vector string

  • Separate false positives, true positives, and false negatives using a supplied test data set

  • Map common scan outputs such as CVE identifiers, CPE strings, and configuration benchmark results to the correct vulnerability management lifecycle stage

Your checkpoint

A scoring worksheet of ten justified CVSS vectors plus a written false-positive triage log

Week 4

Vulnerability Management

  • Prioritize a 25-item finding list using a method that combines CVSS, asset criticality, and threat context

  • Draft remediation SLAs by severity tier and defend each timeline against business constraints

  • Select compensating controls that reduce residual risk when patching is not feasible

  • Compare scan cadence options against continuous monitoring and compliance-driven testing requirements

Your checkpoint

A prioritized remediation plan for a 25-item synthetic finding list with SLAs, owners, and compensating controls

Week 5

Incident Response

  • Classify incidents against a severity matrix and justify each escalation decision

  • State the evidence-handling rule that applies at each phase of the incident response lifecycle

  • Order volatile evidence collection correctly for a compromised workstation scenario

  • Differentiate containment strategies such as host isolation, network segmentation, and account disablement by blast radius

Your checkpoint

A written incident triage playbook containing a severity matrix and an ordered evidence-collection checklist

Week 6

Incident Response

  • Trace a lateral-movement scenario through log data and identify the detection gaps exposed

  • Distinguish eradication from recovery and list the validation criteria required before returning a host to service

  • Map common attack techniques to the specific data sources that would reveal them

  • Draft a post-incident review template capturing root cause, lessons learned, and control updates

Your checkpoint

A completed tabletop incident report for a ransomware scenario covering containment through lessons learned

Week 7

Reporting and Communication

  • Translate technical findings into risk statements tailored to executive and technical audiences

  • Assign metric types such as MTTD, MTTR, and detection coverage to the audience that should receive them

  • Apply data-handling and disclosure rules to a breach-notification scenario

  • Draft a vulnerability report that includes business impact, supporting evidence, and a recommended action

Your checkpoint

Two versions of the same incident summary: a one-page executive brief and a supporting technical appendix

Week 8

Security Operations & Vulnerability Management & Incident Response & Reporting and Communication

  • Re-test every objective flagged as weak in weeks 1 through 7 and close the remaining gaps

  • Complete two timed full-length practice exams and trace each miss back to its root cause

  • Recite from memory the incident response lifecycle, the vulnerability management lifecycle, and the CVSS base metric groups

  • Build a one-page pre-exam reference sheet of thresholds, formulas, and acronyms

Your checkpoint

Two timed practice exam score sheets with a fully resolved miss log and a one-page reference sheet

Milestones

Week 2: Recall 30 Domain 1 terms on a closed-book self-quiz at 90% accuracy and have five working detection queries saved

Week 4: Score at least 80% on a 60-question practice set covering Domains 1 and 2 and log every missed objective on a review sheet

Week 6: Complete the ransomware tabletop report unaided and sequence all incident response phases correctly without notes

Week 7: Produce both report versions for the same incident and pass an audience-fit checklist for each

Week 8: Score 85% or higher on two consecutive timed full-length practice exams before scheduling the real exam

CySA+ exam day

Your checklist

Primary photo ID

Bring an original, unexpired government-issued ID with photo and signature; the name must match your exam appointment. Confirm exact accepted forms with CompTIA/Pearson VUE. [needs_review]

Secondary ID

Bring a second original, unexpired ID as required by the provider. Acceptable secondary forms vary, so confirm the exact rule before exam day. [needs_review]

Appointment confirmation

Save the date, time, test-center address or online check-in link, and confirmation number offline so you can access them without relying on email.

Arrival plan

For a test center, plan to arrive at least 15-30 minutes early; for online proctoring, begin check-in early. Confirm the provider's exact recommended timing. [needs_review]

Online system test

If testing online, run the proctoring system test in advance and verify webcam, microphone, speakers, internet, and browser compatibility.

Account credentials

Know your CompTIA/Pearson VUE login and reset the password before exam day; keep credentials secure but accessible.

Travel and logistics backup

Plan your route, parking or transit, and a backup plan; check weather and traffic the day before.

Personal items plan

Leave prohibited items at home or plan for locker storage. Confirm what the test center or online proctor allows. [needs_review]

Clothing and accessories

Wear comfortable layers and avoid smartwatches, fitness trackers, and unnecessary jewelry. Confirm accessory rules with the provider. [needs_review]

Rest and fuel

Sleep well, eat a normal meal, and hydrate; avoid heavy caffeine or unfamiliar supplements on exam day.

Light review only

Skim the official exam objectives and your weak-domain notes; do not try to learn new topics in the final hours.

Time-strategy reminder

Plan to flag PBQs or long questions, keep a steady pace, and leave time to review marked items before submitting.

Plan the day

Final 72 hours

Confirm appointment details and ID requirements; run the online system test if applicable; plan travel; review official objectives and weak domains; practice a few PBQs under timed conditions; protect your sleep schedule.

24 hours before

Recheck confirmation, location or online link, IDs, and weather; prepare clothes and permitted items; charge devices; do light review only; set two alarms; avoid new topics and heavy cramming.

Morning of

Eat and hydrate; bring required IDs; arrive early or start online check-in early; use the restroom before check-in; silence and store your phone; stay calm and avoid last-minute group discussion.

During the test

Read the candidate agreement and tutorial; note the timer; flag PBQs or uncertain items and return to them; answer every question; use only provided scratch materials; review flagged items if time remains; submit deliberately.

Rules to check

  • Bring original, unexpired ID, and ensure the name matches your appointment. Expired or photocopied ID is generally not accepted; confirm the exact ID policy with the provider.

  • Follow all proctor instructions. Unauthorized materials, phones, smartwatches, or notes in the testing area can lead to removal or score cancellation.

  • There are generally no scheduled breaks; if you leave the testing area, the timer may continue and re-entry may be restricted. Confirm the break policy with the provider.

  • The exam is pass/fail with a scaled score; for CySA+ CS0-003 the passing score is 750 on a 100-900 scale. Confirm current scoring details with CompTIA.

  • You will likely accept a candidate agreement or NDA; do not share, record, or reconstruct exam content.

  • Late arrival can result in denied entry or forfeiture of fees; know the provider's cutoff and reschedule rules. Confirm with the provider.

  • If testing online, clear your desk, scan your room if asked, use only one monitor, and keep your face visible; confirm online-proctoring rules in advance.

  • If you need accommodations or have questions about permitted items, arrange them before exam day with the provider.

CySA+ FAQ

How many CySA+ practice questions are available?

The practice set has 200 CySA+ questions. Each one includes the choices, the correct answer, and an explanation, and the set is free to read with no signup.

How many CySA+ flashcards are available?

The flashcard set has 32 CySA+ cards. Each card shows the term and its definition.

Which topics does the CySA+ study material cover?

The CySA+ study material has 4 sections, including Security Operations, Vulnerability Management, and Incident Response.

What format facts does the catalog list for the CySA+ exam?

The catalog lists a duration of 165 minutes and these item types: multiple choice (single- and multiple-response), drag-and-drop activities, and performance-based questions (PBQs) for the CySA+ exam.