SPI Practice Test

Sonography Principles and Instrumentation (SPI)

SPI overview

  • 200 practice questions
  • 32 flashcards
  • 3 study guide topics
  • 40 key terms

What you'll study

  • Physical Principles and Instrumentation34%
  • Doppler and Hemodynamics33%
  • Quality Assurance, Safety and Artifacts33%

The Sonography Principles and Instrumentation (SPI) examination is the physics-and-instrumentation exam within the Inteleos/ARDMS certification family. It is aimed at sonographers, vascular technologists, and physicians who need to demonstrate that they understand how ultrasound equipment generates, displays, and measures information - not anatomy or pathology. Content generally centers on the behavior of sound in tissue, transducer construction and selection, beam formation and focusing, signal processing and image display, axial and lateral resolution, artifacts, Doppler principles and hemodynamics, bioeffects, and quality assurance and instrument safety. Because the official exam page could not be retrieved when this material was compiled (the address returned a 404 error page), verifiable logistics such as item count, time limit, fee, passing standard, retake rules, and published domain weights are not stated here; confirm them on the current official Inteleos/ARDMS page before you register. Preparation usually combines a dedicated physics text, hands-on review of machine controls and knobology, and repeated practice with calculation-style items such as attenuation, pulse repetition frequency, Nyquist limit, and Doppler shift. This guide is independent study material and is not affiliated with, endorsed by, or sponsored by Inteleos or ARDMS.

Common mistakes

When asked which control or parameter determines axial resolution, the candidate answers 'beam width' or 'focal zone,' and when asked about lateral resolution answers 'pulse duration' or 'number of cycles in the pulse.'

Both axial and lateral resolution improve as transmitted frequency rises, so the two blur together under exam pressure and the candidate substitutes whichever factor comes to mind first.

What to do instead

Anchor each resolution to the one physical quantity that governs it: axial resolution = spatial pulse length / 2 = (cycles x wavelength)/2, so it is set by frequency, bandwidth, and damping; lateral resolution = beam width, so it is set by frequency, aperture, and focusing. Use the classic groupings - axial/longitudinal/range/radial/depth (LARRD) versus lateral/azimuthal/transverse/angular (LATA) - and always attach the 'divide by 2' to the axial formula.

The candidate states that turning up overall gain or adjusting time-gain compensation increases the acoustic output delivered to the patient, or recommends lowering gain as the way to reduce patient exposure.

Both gain knobs visibly brighten the image, which makes them feel like 'more power,' and the exam deliberately pairs a display change with the exposure question.

What to do instead

Sort controls into two bins. Receiver-side (overall gain, TGC, compression/dynamic range, gray-scale map) changes only how returning echoes are displayed and has no effect on exposure. Transmitter-side (output power, pulse amplitude, PRF in some modes) changes exposure and moves the thermal and mechanical indices. For an exposure question, the only correct lever is output power / transmit intensity.

In calculation items the candidate solves for pulse repetition period or reflector depth without the round-trip factor of two, or mixes kHz with Hz, MHz with Hz, or milliseconds with microseconds and reports a value off by a factor of 2, 1000, or 10^6.

The exam supplies numbers in whichever units make the arithmetic tidy, and under time pressure the candidate plugs values straight into the formula without a unit-and-geometry check.

What to do instead

Before computing, write the formula with units attached and say the trip out loud: depth d = c x t / 2 because the pulse travels to the reflector and back; maximum PRF for a given depth = c / (2d); Nyquist limit = PRF / 2. Convert everything to meters, seconds, and hertz first, then convert the answer back. A quick sanity check (soft tissue at 1540 m/s means about 13 microseconds per centimeter of round trip) catches most order-of-magnitude errors.

The candidate measures a vessel at a Doppler angle of 70-85 degrees, leaves the angle correction at zero or sets it to the wrong value, and then reports the resulting low velocity shift as the true velocity.

The spectral display looks crisp at a steep angle because the sample volume stays in the vessel, so nothing signals that the cosine term has collapsed toward zero.

What to do instead

Remember the shift is proportional to the cosine of the angle: at 0 degrees the cosine is 1, at 60 degrees it is 0.5, at 90 degrees it is 0 (no detectable shift). Uncorrected or under-corrected measurements systematically underestimate velocity - an uncorrected 60-degree reading is half the true value. Keep the angle at or below 60 degrees, use a steerable or angled approach when the vessel runs perpendicular, and verify that the angle cursor parallels the vessel wall, not the beam direction.

To correct aliasing, the candidate recommends decreasing the PRF, increasing depth of field, or raises transmitted frequency, and also believes continuous-wave Doppler can alias.

Aliasing is remembered only as 'the waveform wraps around,' without linking it to the Nyquist limit and to the inverse relationship between PRF and imaging depth.

What to do instead

State the rule chain: aliasing occurs when the Doppler shift exceeds the Nyquist limit (PRF/2); the maximum PRF is limited by depth because PRF = c/(2d), so increasing depth lowers the available PRF and worsens aliasing; a higher transmitted frequency raises the Doppler shift and also worsens aliasing. Effective fixes are raising the PRF scale, shifting the baseline, lowering transmitted frequency, increasing the Doppler angle toward 60 degrees, using a higher-velocity scale preset, or switching to continuous wave - which has no range resolution but cannot alias because it has no sampling PRF.

The candidate places the Doppler sample volume against the vessel wall or straddling the wall, keeps a large gate in a small vessel, or tries to eliminate aliasing with the wall filter, and then misreads the resulting spectral broadening or low-velocity clutter as true flow.

Wall filter and sample-gate size both change the appearance of the spectrum, so their distinct purposes get merged; the candidate also forgets that flow profile depends on vessel size and branching.

What to do instead

Keep the sample volume at the center of the lumen and no wider than the vessel, because in laminar (parabolic) flow the center holds the highest velocities and the steepest, cleanest spectral edge; sample near the wall and you record the slow, broadened edge. Know that the wall filter removes high-amplitude, low-frequency signals from moving walls and tissue - it does not fix aliasing and it can hide genuinely slow flow. Distinguish parabolic laminar flow (small, straight vessels) from the flatter plug profile of large vessels and from the disturbed, broadened flow seen distal to a stenosis or at a bifurcation.

For quality-assurance items the candidate answers with generic pass/fail numbers or a fixed schedule instead of the baseline principle, and cannot match a phantom target type (dead zone, vertical or horizontal distance accuracy, axial or lateral resolution, uniformity, maximum depth of visualization) to the parameter it actually measures.

Quality assurance reads as administrative housekeeping, so it gets skimmed; the phantom targets all look like the same pins and cylinders in a description.

What to do instead

Learn the frame: the acceptance test on installation establishes the baseline, every later test is a comparison against that baseline rather than against a universal number, and testing repeats after transducer change, repair, or service. Then pair each phantom feature with its purpose: the near-field group of targets tests the dead zone, the measured spacings test vertical and horizontal distance accuracy, closely spaced target pairs test axial versus lateral resolution, the anechoic cylindrical targets test uniformity and beam/slice-thickness behavior, and the deepest visible target establishes maximum depth of penetration. Set gain and TGC reproducibly before measuring so the comparison is meaningful.

The candidate assumes one passing check covers the whole system, or that quality assurance is limited to image appearance, so they omit the individual transducer-by-transducer requirement, mechanical and electrical inspection, and documentation of results.

Quality assurance is pictured as 'does the picture look okay today,' which excludes the equipment and record-keeping components the exam tests.

What to do instead

Treat quality assurance as a documented program per transducer and per imaging preset, repeated on a schedule and after any repair, and covering equipment condition (cables, lens and face integrity, element dropouts on the uniformity image), electrical and mechanical safety, image quality metrics against baseline, and retained records that allow trend detection rather than a single yes/no verdict.

The candidate treats the thermal index and mechanical index as interchangeable, says the mechanical index measures temperature rise, or claims the mechanical index increases as transmitted frequency increases at the same pressure.

Both indices appear as small on-screen numbers that the operator is told to watch, so their distinct physical meaning and their opposite direction of dependence are easy to blur.

What to do instead

Separate them by mechanism and by formula. The mechanical index estimates cavitation risk and equals peak rarefactional (negative) pressure in MPa divided by the square root of frequency in MHz - because frequency is in the denominator, a higher frequency lowers the mechanical index for the same pressure. The thermal index estimates temperature rise and is the ratio of acoustic power to the power needed to raise tissue 1 degree Celsius, reported as soft-tissue, bone, or cranial variants. Know the regulatory ceilings commonly cited (mechanical index at or below 1.9, general thermal index at or below 6, ophthalmic thermal index at or below 1) and that both indices are reduced by lowering output power - not by adjusting receiver gain.

The candidate labels an artifact from its appearance alone - calling a comet tail 'shadowing,' calling ring-down 'reverberation from two strong reflectors,' calling acoustic enhancement 'through-transmission shadowing,' or failing to recognize that a propagation-speed error shifts a structure axially rather than laterally.

Artifacts are memorized as a list of names and pictures instead of as consequences of specific physical mechanisms, so near-misses become coin flips.

What to do instead

Group artifacts by mechanism and reason from the mechanism. Attenuation-based: shadowing behind a strongly attenuating or reflecting structure, and enhancement behind a weakly attenuating fluid. Reflection/reverberation-based: evenly spaced reverberation between two strong reflectors, comet tail from a small highly reflective structure, ring-down from resonant gas, and mirror image from a large curved reflector. Refraction-based: edge shadowing and duplicate images at curved interfaces. Assumption-violation based: propagation-speed error displacing a reflector along the beam axis, range ambiguity with high PRF, slice-thickness or beam-width partial volume, and grating/side-lobe clutter appearing off-axis. Also keep the intensity descriptors straight for safety questions: spatial peak temporal average and spatial average temporal average describe different exposures, and spatial peak pulse average is the highest of the set.

Exam requirements can change. Confirm current details with the exam provider.

SPI practice

200 questions. Each one lists the choices, the correct answer, and an explanation. With JavaScript, this list opens one question at a time. The checker at the top of this page saves progress in this browser when it is available.

  1. Question 1Physical Principles and Instrumentation

    Which property of a sound wave is determined solely by the source and remains unchanged as the wave passes from one medium into another?

    1. Wavelength
    2. Propagation speed
    3. Frequency Correct answer.
    4. Acoustic impedance

    Explanation

    Frequency is set by the pulser/transducer and is unchanged when the wave enters a new medium. Wavelength and propagation speed both change with the medium because they are linked by the equation speed = frequency x wavelength.

  2. Question 2Physical Principles and Instrumentation

    The time required for one complete cycle of a sound wave is called the:

    1. wavelength
    2. duty factor
    3. pulse duration
    4. period Correct answer.

    Explanation

    The period is the duration of a single cycle and is the reciprocal of frequency. Wavelength is a distance, while duty factor and pulse duration describe pulsed-wave timing rather than a single cycle.

  3. Question 3Physical Principles and Instrumentation

    Through which of the following media does ultrasound travel fastest?

    1. Bone Correct answer.
    2. Fat
    3. Soft tissue
    4. Air

    Explanation

    Propagation speed increases as a medium becomes stiffer and less compressible. Bone is the stiffest of these media, so sound travels through it at roughly 4000 m/s or more, compared with about 1540 m/s in soft tissue.

  4. Question 4Physical Principles and Instrumentation

    The pulse repetition period of a pulsed-wave system equals the sum of the:

    1. pulse duration and spatial pulse length
    2. wave period and wavelength
    3. duty factor and pulse duration
    4. pulse duration and listening time Correct answer.

    Explanation

    The pulse repetition period is measured from the start of one pulse to the start of the next, so it includes both the transmit time (pulse duration) and the receive or listening time. It is the reciprocal of the pulse repetition frequency.

  5. Question 5Physical Principles and Instrumentation

    Which transducer component is designed to reduce reflection at the boundary between the transducer and the skin?

    1. Matching layer Correct answer.
    2. Backing layer
    3. Piezoelectric element
    4. Acoustic lens

    Explanation

    The matching layer has an impedance between that of the element and soft tissue, which reduces the reflection at the interface and improves transmission. Its thickness is typically one quarter of the wavelength in the matching material.

  6. Question 6Physical Principles and Instrumentation

    The piezoelectric effect refers to the:

    1. conversion of electricity into sound and back Correct answer.
    2. conversion of light energy into electrical energy
    3. conversion of sound energy into thermal energy
    4. conversion of heat energy into electrical energy

    Explanation

    A piezoelectric crystal changes shape when a voltage is applied (transmit) and produces a voltage when deformed by returning echoes (receive). This two-way energy conversion is the basis of all ultrasound transducers.

  7. Question 7Physical Principles and Instrumentation

    Which display mode plots echo amplitude as vertical spikes along a single line of sight?

    1. Color Doppler
    2. A-mode Correct answer.
    3. M-mode
    4. B-mode

    Explanation

    In A-mode (amplitude mode) the x-axis represents depth and the y-axis represents echo amplitude, producing a spike display. It was the earliest display format and is still used in some ophthalmic and echo-ranging measurements.

  8. Question 8Physical Principles and Instrumentation

    The damping (backing) material of a pulsed transducer primarily:

    1. reduces the number of cycles per pulse Correct answer.
    2. increases the emitted acoustic power
    3. improves the lateral resolution of the beam
    4. widens the beam in the elevation plane

    Explanation

    The backing block absorbs energy from the rear face of the crystal and mechanically damps ringing, so the pulse contains fewer cycles and has a broader bandwidth. A shorter pulse directly improves axial resolution.

  9. Question 9Physical Principles and Instrumentation

    A reflector returns an echo that is 100 times weaker than the transmitted intensity. What is this difference in decibels?

    1. 100 dB
    2. 20 dB Correct answer.
    3. 40 dB
    4. 10 dB

    Explanation

    Decibels are calculated as 10 log of the intensity ratio, so 10 log(100) = 20 dB. A factor of 100 in intensity therefore corresponds to a 20 dB change.

  10. Question 10Physical Principles and Instrumentation

    An echo returns 65 microseconds after transmission. Assuming a propagation speed of 1540 m/s in soft tissue, the reflector is located at a depth of approximately:

    1. 2.5 cm
    2. 5 cm Correct answer.
    3. 10 cm
    4. 13 cm

    Explanation

    The round-trip distance equals speed times time: 1540 m/s x 65 microseconds is about 10 cm. Because the sound traveled to the reflector and back, the depth is half of that, or about 5 cm.

  11. Question 11Physical Principles and Instrumentation

    Axial resolution is determined by the:

    1. spatial pulse length Correct answer.
    2. transducer diameter
    3. length of the focal zone
    4. beam width in the scan plane

    Explanation

    Two reflectors aligned along the beam can be separated only if they are farther apart than half the spatial pulse length. Shorter pulses therefore produce better axial resolution.

  12. Question 12Physical Principles and Instrumentation

    Which change would improve axial resolution?

    1. Using a broadband transducer with heavy damping Correct answer.
    2. Moving the focal zone deeper into the tissue
    3. Selecting a lower frequency imaging transducer for penetration
    4. Increasing the acoustic output power of the system

    Explanation

    Axial resolution depends on spatial pulse length, which equals the number of cycles multiplied by wavelength. Heavy damping and broad bandwidth shorten the pulse, and a higher frequency shortens the wavelength, both improving axial resolution.

  13. Question 13Physical Principles and Instrumentation

    Lateral resolution is best:

    1. only in the far field
    2. at the transducer face
    3. where the beam is narrowest Correct answer.
    4. throughout the entire beam

    Explanation

    Lateral resolution depends on beam width, so it is optimal at the focal zone where the beam is narrowest. Away from the focus the beam widens and lateral resolution degrades.

  14. Question 14Physical Principles and Instrumentation

    Elevation (slice-thickness) resolution is determined mainly by the:

    1. Receive gain
    2. Pulse duration
    3. Element height Correct answer.
    4. Doppler angle

    Explanation

    The dimension of the element perpendicular to the scan plane, together with a fixed acoustic lens, sets the elevation beam width and therefore the slice thickness. Thin slices require a short element height and a well-placed elevation focus.

  15. Question 15Physical Principles and Instrumentation

    Increasing the selected imaging depth on a scanner will generally:

    1. decrease the frame rate Correct answer.
    2. increase the frame rate
    3. increase the pulse repetition frequency
    4. reduce the duty factor to zero

    Explanation

    Deeper imaging lengthens the listening time needed for echoes to return, which increases the pulse repetition period and lowers the pulse repetition frequency. With a fixed number of lines per frame, a lower PRF means fewer frames can be produced each second.

  16. Question 16Physical Principles and Instrumentation

    Tissue harmonic imaging improves image quality primarily because harmonic signals:

    1. are stronger than the fundamental at every depth in tissue
    2. arise mainly in the strongest central part of the beam Correct answer.
    3. are generated only when a contrast agent is present
    4. have a lower frequency than the transmitted fundamental

    Explanation

    Harmonics arise from nonlinear propagation, which is greatest where the beam intensity is highest, so they are generated predominantly in the central beam and at depth. Because weak side-lobe and near-field echoes produce few harmonics, the harmonic image shows less clutter and better contrast.

  17. Question 17Physical Principles and Instrumentation

    A Doppler angle of 60 degrees produces a Doppler shift that is what fraction of the maximum possible shift for the same flow?

    1. Three quarters
    2. Equal to the maximum
    3. One half Correct answer.
    4. One quarter

    Explanation

    The Doppler equation includes the cosine of the angle between the beam and flow. The cosine of 60 degrees is 0.5, so the measured shift is half of what would be recorded at zero degrees.

  18. Question 18Physical Principles and Instrumentation

    Aliasing in spectral Doppler occurs when the Doppler shift exceeds:

    1. half the pulse repetition frequency Correct answer.
    2. the transmitted frequency
    3. the frame rate
    4. twice the pulse repetition frequency

    Explanation

    The Nyquist limit equals half the pulse repetition frequency, and Doppler shifts above this value are incorrectly displayed on the opposite side of the baseline. Raising the PRF, lowering the transmitted frequency, or increasing the Doppler angle can eliminate aliasing.

  19. Question 19Physical Principles and Instrumentation

    Increasing the color Doppler packet size (ensemble length) will:

    1. remove aliasing
    2. improve temporal resolution
    3. increase the color frame rate
    4. reduce the color frame rate Correct answer.

    Explanation

    A larger packet means more pulses must be transmitted along each color line, so more time is required to build each frame and the frame rate falls. The trade-off is more accurate velocity estimation.

  20. Question 20Physical Principles and Instrumentation

    Which change most improves the signal-to-noise ratio when imaging a deep structure?

    1. Increasing the acoustic output power Correct answer.
    2. Increasing the receiver gain
    3. Decreasing the pulse repetition frequency
    4. Switching to a higher frequency probe

    Explanation

    Signal-to-noise ratio improves only when the returning echo signal is strengthened relative to noise. Raising output power increases the transmitted intensity and therefore the echo amplitude, provided ALARA limits are respected.

  21. Question 21Physical Principles and Instrumentation

    Two media have acoustic impedances of 4 MRayl and 8 MRayl. At normal incidence, the fraction of intensity reflected at the interface is approximately:

    1. About 44%
    2. About 67%
    3. About 33%
    4. About 11% Correct answer.

    Explanation

    The intensity reflection coefficient equals the square of the impedance difference divided by the impedance sum. Here (8-4)/(8+4) = 0.33, and squaring gives about 0.11, so roughly 11% of the intensity is reflected.

  22. Question 22Physical Principles and Instrumentation

    A 5 MHz transducer operating in soft tissue produces a wavelength of approximately:

    1. 0.77 mm
    2. 3.1 mm
    3. 0.31 mm Correct answer.
    4. 0.15 mm

    Explanation

    Wavelength equals propagation speed divided by frequency, so 1540 m/s divided by 5,000,000 Hz gives about 0.000308 m, or 0.31 mm. This is a useful rule-of-thumb value for a 5 MHz probe in soft tissue.

  23. Question 23Physical Principles and Instrumentation

    Using an attenuation coefficient of 0.5 dB/cm/MHz, the attenuation of a 5 MHz beam after traveling 4 cm in soft tissue is approximately:

    1. 2 dB
    2. 20 dB
    3. 5 dB
    4. 10 dB Correct answer.

    Explanation

    Total attenuation equals the coefficient multiplied by frequency and path length: 0.5 x 5 x 4 = 10 dB. Note that this is a one-way attenuation figure; an echo must travel the path twice, so round-trip attenuation would be 20 dB.

  24. Question 24Physical Principles and Instrumentation

    The quality factor (Q factor) of a pulsed transducer is inversely related to the:

    1. bandwidth of the transducer Correct answer.
    2. acoustic impedance of the matching layer
    3. pulse repetition frequency
    4. wavelength in soft tissue

    Explanation

    Q factor is defined as the resonant frequency divided by the bandwidth, so a wide bandwidth gives a low Q factor and a short pulse. Highly damped, broadband transducers therefore have low Q values.

  25. Question 25Physical Principles and Instrumentation

    Which control amplifies returning echoes differently depending on their depth?

    1. Display dynamic range
    2. Acoustic output power
    3. Time gain compensation Correct answer.
    4. Overall receiver gain

    Explanation

    Time gain compensation applies progressively greater amplification to later-arriving echoes so that deeper reflectors appear equally bright despite greater attenuation. Overall gain, by contrast, amplifies all echoes by the same amount.

  26. Question 26Physical Principles and Instrumentation

    If the frequency of a continuous sound wave is doubled, the period of the wave:

    1. is unchanged
    2. is doubled
    3. increases fourfold
    4. is halved Correct answer.

    Explanation

    Period is the time required for one complete cycle and equals the reciprocal of frequency (T = 1/f). Doubling the frequency therefore halves the period. Period and frequency are always inversely related, independent of amplitude or intensity.

  27. Question 27Physical Principles and Instrumentation

    In soft tissue, the propagation speed of sound is determined primarily by:

    1. tissue stiffness and density
    2. the acoustic power of the beam
    3. the transmitted acoustic frequency Correct answer.
    4. the angle of incidence at a boundary

    Explanation

    Speed is a property of the medium, described by c = square root of (bulk modulus divided by density). Stiffer media conduct sound faster, while denser media slow it down. Frequency, power, and beam angle do not alter the propagation speed through a given medium.

  28. Question 28Physical Principles and Instrumentation

    If the amplitude of a sound wave is tripled while the frequency is held constant, the intensity becomes:

    1. 27 times greater
    2. 6 times greater
    3. 9 times greater Correct answer.
    4. 3 times greater

    Explanation

    Intensity is proportional to the square of the pressure amplitude. Tripling the amplitude therefore multiplies intensity by 3 squared, which is 9. Frequency does not enter this relationship.

  29. Question 29Physical Principles and Instrumentation

    For specular reflection at a large, smooth interface, the angle of reflection is:

    1. smaller than the angle of incidence when speed increases
    2. equal to the angle of refraction
    3. always 90 degrees to the incident beam
    4. equal to the angle of incidence measured from the normal Correct answer.

    Explanation

    Specular reflection obeys the law that the angle of reflection equals the angle of incidence, both measured from the normal to the interface. The reflected beam returns on the same side of the interface as the incident beam. Refraction, by contrast, involves transmission into the second medium.

  30. Question 30Physical Principles and Instrumentation

    Absorption of ultrasound in tissue refers to the:

    1. bending of the beam where propagation speed changes
    2. conversion of acoustic energy into heat Correct answer.
    3. redirection of sound by small scatterers
    4. partial reflection at an impedance boundary

    Explanation

    Absorption is the portion of attenuation in which acoustic energy is converted into heat within the tissue. Together with reflection and scattering, it accounts for the total attenuation of the beam. Absorption increases with frequency and with depth traveled.

  31. Question 31Physical Principles and Instrumentation

    Which Doppler technique avoids aliasing because it does not sample the returning signal at discrete intervals?

    1. Color Doppler
    2. Continuous-wave Doppler Correct answer.
    3. Duplex spectral Doppler
    4. Pulsed-wave Doppler

    Explanation

    Aliasing occurs when a sampled signal exceeds the Nyquist limit imposed by the pulse repetition frequency. Continuous-wave Doppler transmits and receives simultaneously and processes the returning signal continuously, so no sampling limit applies. Pulsed and color techniques all remain subject to the Nyquist limit.

  32. Question 32Physical Principles and Instrumentation

    The wall filter in a Doppler system is used to:

    1. eliminate low-frequency echoes from stationary tissue Correct answer.
    2. remove high-velocity signals from the display
    3. increase the Doppler angle correction applied by the operator
    4. reduce the transmitted acoustic power

    Explanation

    Strong, low-frequency Doppler shifts arise from moving vessel walls and surrounding tissue and can obscure the flow signal. The wall filter rejects these low-frequency, high-amplitude components. Setting the filter too high can also remove genuine slow flow.

  33. Question 33Physical Principles and Instrumentation

    Increasing the overall receiver gain will:

    1. change the transmitted acoustic power
    2. amplify only echoes returning from deep structures
    3. improve axial resolution
    4. amplify all returning echoes by the same amount Correct answer.

    Explanation

    Overall gain is applied uniformly in the receiver, so every returning echo is boosted by the same factor. It improves brightness but does not correct for depth-dependent attenuation, which is the job of time-gain compensation. Receiver gain also cannot alter the transmitted pulse or resolution.

  34. Question 34Physical Principles and Instrumentation

    What is the wavelength of a 3 MHz beam traveling in soft tissue? Assume a propagation speed of 1540 m/s.

    1. approximately 0.51 mm Correct answer.
    2. approximately 1.5 mm
    3. approximately 4.6 mm
    4. approximately 0.31 mm

    Explanation

    Wavelength equals propagation speed divided by frequency. Dividing 1540 m/s by 3,000,000 Hz gives 0.000513 m, or about 0.51 mm. Wavelength shrinks as frequency rises.

  35. Question 35Physical Principles and Instrumentation

    What is the highest pulse repetition frequency that avoids range ambiguity when the deepest structure of interest is 5 cm deep? Assume c = 1540 m/s.

    1. 1,540 Hz
    2. 15,400 Hz Correct answer.
    3. 7,700 Hz
    4. 30,800 Hz

    Explanation

    An echo must complete a round trip of twice the depth, or 10 cm, before the next pulse is emitted. Using PRF = c/(2d) gives 1540 divided by 0.1 m, or 15,400 Hz. Higher PRFs would cause echoes from one pulse to arrive after the next pulse has been sent.

  36. Question 36Physical Principles and Instrumentation

    A pulsed wave has a pulse duration of 1 microsecond and a pulse repetition period of 1 millisecond. The duty factor is:

    1. 0.0001
    2. 0.01
    3. 1.0
    4. 0.001 Correct answer.

    Explanation

    Duty factor is the fraction of time the transducer is transmitting, calculated as pulse duration divided by pulse repetition period. Dividing 1 microsecond by 1000 microseconds gives 0.001. Duty factor is therefore always a small number for pulsed imaging.

  37. Question 37Physical Principles and Instrumentation

    A 5 MHz transducer in soft tissue emits pulses that contain 2 cycles. The spatial pulse length is approximately:

    1. 1.20 mm
    2. 0.15 mm
    3. 0.31 mm
    4. 0.62 mm Correct answer.

    Explanation

    Spatial pulse length equals the number of cycles in the pulse multiplied by the wavelength. At 5 MHz in soft tissue the wavelength is about 0.31 mm, so two cycles occupy about 0.62 mm. Fewer cycles and higher frequencies shorten the pulse.

  38. Question 38Physical Principles and Instrumentation

    Using an attenuation coefficient of 0.5 dB/cm/MHz, what thickness of soft tissue attenuates a 4 MHz beam by 6.9 dB?

    1. about 13.8 cm
    2. about 3.5 cm Correct answer.
    3. about 1.7 cm
    4. about 6.9 cm

    Explanation

    At 4 MHz the coefficient is 0.5 times 4, or 2 dB per centimeter. Dividing the 6.9 dB loss by 2 dB/cm gives about 3.5 cm, which is one half-value layer. Each additional 3.5 cm removes another 6.9 dB, halving the intensity again.

  39. Question 39Physical Principles and Instrumentation

    Refraction of an ultrasound beam at a tissue boundary occurs because:

    1. the acoustic impedance mismatch at the boundary is very large
    2. the propagation speed differs between the two media Correct answer.
    3. the second medium attenuates the beam more strongly
    4. the beam is scattered by small reflectors at the boundary

    Explanation

    Refraction is a change in beam direction caused by a difference in propagation speed between two media at a non-perpendicular incidence. The relationship is described by Snell's law. Scattering, reflection, and attenuation involve other physical mechanisms.

  40. Question 40Physical Principles and Instrumentation

    Which structure acts as a Rayleigh scatterer for a 5 MHz beam in soft tissue?

    1. A fetal femur
    2. The aortic wall
    3. A red blood cell Correct answer.
    4. The diaphragm

    Explanation

    Rayleigh scattering applies when the reflector is much smaller than the wavelength, and it increases strongly with frequency. At 5 MHz the wavelength in soft tissue is about 0.31 mm, so cells of roughly 7 micrometers behave as Rayleigh scatterers. Large structures such as the diaphragm and bone reflect specularly.

  41. Question 41Physical Principles and Instrumentation

    The rejection control on a scanner:

    1. increases the transmitted pulse amplitude
    2. amplifies deep echoes more than shallow ones
    3. shifts the focal zone toward the far field
    4. removes low-level echoes below a chosen threshold Correct answer.

    Explanation

    Rejection sets a minimum echo amplitude that will be displayed, discarding weaker signals such as electronic noise. Raising rejection cleans the background but can also erase genuine low-level echoes. It is a display processing function and does not change the transmitted pulse.

  42. Question 42Physical Principles and Instrumentation

    For a fixed transducer diameter, decreasing the operating frequency will:

    1. leave the far-field beam width unchanged
    2. make the far-field beam diverge more Correct answer.
    3. shorten the near field
    4. make the far-field beam diverge less

    Explanation

    Beam divergence is described by the sine of the divergence angle being proportional to wavelength divided by aperture. Lower frequency means longer wavelength, so the beam spreads more widely in the far field. The near-field length, which is proportional to aperture squared divided by wavelength, actually lengthens.

  43. Question 43Physical Principles and Instrumentation

    The mechanical index is calculated as:

    1. spatial peak temporal average intensity divided by 100 mW/cm squared
    2. total acoustic power divided by the beam cross-sectional area
    3. peak positive pressure multiplied by the center frequency in MHz
    4. peak negative pressure divided by the square root of frequency Correct answer.

    Explanation

    The mechanical index estimates the likelihood of cavitation and is defined as the peak rarefactional (negative) pressure in megapascals divided by the square root of the center frequency in megahertz. Higher peak negative pressure raises the index, while higher frequency lowers it. Intensity-based quantities relate to thermal risk instead.

  44. Question 44Physical Principles and Instrumentation

    The matching layer of a pulsed transducer serves to:

    1. damp crystal vibration to shorten the pulse
    2. electrically isolate the crystal from the patient
    3. focus the beam at a selected depth
    4. reduce the impedance mismatch between crystal and tissue Correct answer.

    Explanation

    The matching layer has an impedance intermediate between the crystal and soft tissue, improving transmission of sound across that interface. This reduces reflection losses at the face of the transducer. Damping and focusing are handled by other components.

  45. Question 45Physical Principles and Instrumentation

    Compression of the echo signal before display:

    1. widens the dynamic range of the signal
    2. selectively amplifies echoes according to their depth
    3. has no effect on the displayed gray scale
    4. narrows the range of echo amplitudes displayed Correct answer.

    Explanation

    Echo amplitudes span a range far wider than a display can show, so compression logarithmically reduces that range. Weak echoes are boosted relative to strong ones, allowing both to appear in the same gray-scale image. Depth-selective amplification is a separate function.

  46. Question 46Physical Principles and Instrumentation

    A piezoelectric crystal propagates sound at 4000 m/s. To resonate at 5 MHz, the crystal thickness should be approximately:

    1. 1.6 mm
    2. 0.4 mm Correct answer.
    3. 0.2 mm
    4. 0.8 mm

    Explanation

    A crystal resonates when its thickness equals one half-wavelength of sound in the crystal material. The wavelength is 4000 m/s divided by 5,000,000 Hz, or 0.8 mm, so the half-wavelength thickness is 0.4 mm. Higher frequencies therefore require thinner crystals.

  47. Question 47Physical Principles and Instrumentation

    An unfocused 5 MHz transducer has an element radius of 1 cm. Its near-field length in soft tissue is approximately:

    1. 0.32 cm
    2. 3.2 cm
    3. 32 cm Correct answer.
    4. 8 cm

    Explanation

    Near-field length equals the square of the element radius divided by the wavelength. The wavelength at 5 MHz is about 0.031 cm, so 1 cm squared divided by 0.031 cm gives roughly 32 cm. A larger aperture or higher frequency lengthens the near field.

  48. Question 48Physical Principles and Instrumentation

    A scanner calibrated for 1540 m/s displays a reflector at 10 cm depth in a medium where sound actually travels at 1450 m/s. The true depth of the reflector is approximately:

    1. 11.0 cm
    2. 9.4 cm Correct answer.
    3. 10.6 cm
    4. 8.5 cm

    Explanation

    The scanner converts echo time to distance using an assumed speed, so depth is proportional to the speed actually traveled. Multiplying 10 cm by 1450/1540 gives about 9.4 cm. When the true speed is lower than the assumed speed, the machine overestimates depth.

  49. Question 49Physical Principles and Instrumentation

    A 4 MHz pulse in soft tissue contains 3 cycles. The axial resolution is approximately:

    1. 0.96 mm
    2. 1.2 mm
    3. 0.39 mm
    4. 0.58 mm Correct answer.

    Explanation

    Axial resolution equals half the spatial pulse length. At 4 MHz the wavelength is about 0.385 mm, so three cycles occupy about 1.16 mm, and half of that is roughly 0.58 mm. Fewer cycles per pulse improve axial resolution.

  50. Question 50Physical Principles and Instrumentation

    If the maximum pulse repetition frequency is 9,625 Hz and each frame contains 100 lines, the highest possible frame rate is:

    1. 192 Hz
    2. 96 Hz Correct answer.
    3. 770 Hz
    4. 48 Hz

    Explanation

    The time available per frame is shared among all lines, so frame rate equals PRF divided by the number of lines per frame. Dividing 9,625 Hz by 100 gives about 96 frames per second. Increasing line density or depth lowers the achievable frame rate.

  51. Question 51Physical Principles and Instrumentation

    Which statement describes the direct piezoelectric effect?

    1. An electrical voltage applied to a crystal changes its thickness and generates sound.
    2. A crystal converts electrical energy entirely into heat at its resonant frequency.
    3. A mechanical force applied to a crystal produces an electrical voltage across its faces. Correct answer.
    4. A crystal heated above its Curie temperature regains its polarized structure.

    Explanation

    The direct piezoelectric effect is the conversion of mechanical pressure into an electrical charge, which is how a transducer converts returning echoes into a signal. The converse effect is the conversion of an applied voltage into mechanical deformation, which is how the transmitted pulse is produced.

  52. Question 52Physical Principles and Instrumentation

    A piezoelectric element is heated well above its Curie temperature. The most likely result is that the element will:

    1. lose its piezoelectric properties Correct answer.
    2. become an effective acoustic matching layer
    3. develop a much wider bandwidth
    4. permanently double its resonant frequency

    Explanation

    The Curie temperature is the point at which the aligned dipoles of a ferroelectric crystal become randomized, so the material loses its piezoelectric behavior. The element must be repolarized by cooling it in a strong electric field before it can be used again.

  53. Question 53Physical Principles and Instrumentation

    The purpose of acoustic coupling gel applied between the transducer and the skin is to:

    1. provide a refracting surface at the skin
    2. remove the air gap that would otherwise reflect most of the sound Correct answer.
    3. raise the frequency of the transmitted pulse
    4. reduce the intensity reaching deeper tissues

    Explanation

    The large impedance difference between gas and soft tissue causes nearly all sound at an air interface to be reflected. Gel has an impedance close to that of soft tissue, so it fills the gap and allows the beam to enter the body.

  54. Question 54Physical Principles and Instrumentation

    Which display mode records the position of reflecting interfaces along a single line of sight as a function of time?

    1. C-mode
    2. B-mode
    3. A-mode
    4. M-mode Correct answer.

    Explanation

    Motion mode plots echo position on the vertical axis against time on the horizontal axis, producing a tracing of moving structures such as valve leaflets. Amplitude and brightness modes display depth information at a single instant rather than motion over time.

  55. Question 55Physical Principles and Instrumentation

    Adding damping material to a pulsed transducer element:

    1. increases sensitivity and lengthens the pulse
    2. increases the Q factor and narrows the bandwidth
    3. leaves the pulse unchanged but lowers the resonant frequency
    4. shortens the pulse and widens the bandwidth Correct answer.

    Explanation

    Damping (backing) material absorbs energy and quickly stops crystal vibration, reducing the number of cycles in each pulse. A shorter pulse widens the bandwidth and improves axial resolution, although sensitivity is reduced.

  56. Question 56Physical Principles and Instrumentation

    Which change would produce a narrower bandwidth?

    1. Driving the element with a shorter electrical spike
    2. Increasing the number of cycles within each pulse Correct answer.
    3. Adding a more attenuating backing block
    4. Decreasing the Q factor of the element

    Explanation

    Bandwidth and pulse length are inversely related: more cycles per pulse means a longer pulse and a narrower range of frequencies. Fewer cycles, produced by heavier damping, produces a shorter pulse with a wider bandwidth.

  57. Question 57Physical Principles and Instrumentation

    Lateral resolution is determined primarily by:

    1. the spatial pulse length
    2. the pulse duration and damping
    3. the beam width at the depth of interest Correct answer.
    4. the pulse repetition frequency

    Explanation

    Lateral (azimuthal) resolution describes the ability to distinguish two reflectors side by side and is equal to the beam diameter at that depth. It is best at the focal zone and can be improved by focusing or by using a higher frequency to produce a narrower beam.

  58. Question 58Physical Principles and Instrumentation

    The function of time gain compensation is to:

    1. compensate for attenuation so that similar reflectors at different depths appear equally bright Correct answer.
    2. match the impedance of the transducer to the skin surface
    3. lower the pulse repetition frequency for deeper structures
    4. remove aliasing from the spectral Doppler display

    Explanation

    Echoes from greater depths are weaker because the beam is attenuated on the way out and back. Time gain compensation applies progressively greater amplification at later arrival times so that identical reflectors are displayed with similar brightness regardless of depth.

  59. Question 59Physical Principles and Instrumentation

    Using the read magnification control on a frozen image:

    1. improves spatial resolution by acquiring additional scan lines
    2. narrows the transmitted beam in the region of interest
    3. enlarges stored pixels without adding new information Correct answer.
    4. increases the frame rate within the magnified region

    Explanation

    Read magnification is a post-processing function that enlarges pixels already stored in memory, so it cannot improve resolution. By contrast, write (acoustic) magnification rescans a smaller region with a full complement of lines, which does improve resolution in that region.

  60. Question 60Physical Principles and Instrumentation

    A convex acoustic lens focuses the ultrasound beam because:

    1. it converts longitudinal waves into transverse waves at the lens surface
    2. it absorbs the outer portions of the beam more than the center
    3. sound travels faster through the thicker center, so the central wavefront moves ahead of the edges Correct answer.
    4. it raises the frequency of the central rays above that of the edge rays

    Explanation

    By Huygens' principle the transmitted wavefront is the sum of many small wavelets whose timing depends on the path they travel. In a convex lens of higher propagation speed, the thicker center delays less and the wavefront becomes concave, so the beam converges at the focal point.

  61. Question 61Physical Principles and Instrumentation

    A display memory that stores 6 bits per pixel can present how many shades of gray?

    1. 64 Correct answer.
    2. 12
    3. 32
    4. 6

    Explanation

    Each bit doubles the number of possible levels, so the number of shades equals 2 raised to the number of bits. Six bits therefore provide 2 to the sixth power, or 64, distinct gray levels per pixel.

  62. Question 62Physical Principles and Instrumentation

    Tissue harmonic imaging improves image quality mainly because the harmonic signals:

    1. originate in the matching layer of the transducer
    2. arise in tissue with a narrower beam and fewer side-lobe artifacts Correct answer.
    3. have a lower frequency than the fundamental and penetrate more deeply
    4. are stronger than the fundamental at all depths

    Explanation

    Harmonics are created by nonlinear propagation within tissue, and their amplitude is greatest where the fundamental beam is most intense. This produces a narrower effective beam with reduced side lobes and clutter, improving lateral resolution and contrast even though the harmonic echoes are weaker.

  63. Question 63Physical Principles and Instrumentation

    In soft tissue, the elevational (slice-thickness) resolution of a standard one-dimensional linear array is determined mainly by:

    1. the number of channels in the beam former
    2. the height of the elements and the elevation focus Correct answer.
    3. the pulse repetition frequency and line density
    4. the spatial pulse length of the transmitted pulse

    Explanation

    Slice thickness is set by the element height and the fixed elevation lens or mirror, and in a conventional array it cannot be changed by the operator. Multi-row (1.5D) arrays add electronic control of elevation focusing to reduce slice thickness.

  64. Question 64Physical Principles and Instrumentation

    A pulse has a spatial peak temporal average intensity of 200 mW/cm² and a duty factor of 0.002. Its spatial peak pulse average intensity is:

    1. 10 mW/cm²
    2. 0.4 mW/cm²
    3. 400 W/cm²
    4. 100 W/cm² Correct answer.

    Explanation

    Temporal average intensity equals pulse average intensity multiplied by the duty factor, so the pulse average equals 200 mW/cm² divided by 0.002, which is 100,000 mW/cm² or 100 W/cm². Pulsed beams therefore combine very high peak intensities with low time-averaged intensities.

  65. Question 65Physical Principles and Instrumentation

    A beam strikes an interface at 30 degrees from the normal while traveling from a medium with a speed of 1540 m/s into one with a speed of 3080 m/s. The transmitted angle is:

    1. 60 degrees
    2. 90 degrees Correct answer.
    3. 30 degrees
    4. 15 degrees

    Explanation

    Snell's law gives sin of the transmitted angle as the ratio of the speeds times the sine of the incident angle: 2.0 times 0.5 equals 1.0, so the transmitted angle is 90 degrees and the beam travels along the interface. This incident angle is the critical angle, beyond which total internal reflection occurs.

  66. Question 66Physical Principles and Instrumentation

    At perpendicular incidence, an interface separates media with acoustic impedances of 1.35 and 1.65 MRayl. The intensity reflection coefficient is approximately:

    1. 20%
    2. 0.1%
    3. 1% Correct answer.
    4. 10%

    Explanation

    The intensity reflection coefficient equals the square of the difference in impedance divided by the sum: (0.30 divided by 3.00) squared equals 0.01, or 1%. The remaining 99% of the intensity is transmitted, so a small impedance mismatch allows most of the beam to pass.

  67. Question 67Physical Principles and Instrumentation

    Pulsed Doppler is performed at a depth of 10 cm in soft tissue, with a propagation speed of 1540 m/s and a pulse repetition frequency set to the maximum possible for that depth. The Nyquist limit is:

    1. 1,925 Hz
    2. 3,850 Hz Correct answer.
    3. 15,400 Hz
    4. 7,700 Hz

    Explanation

    The maximum PRF for a 10 cm depth is the propagation speed divided by twice the depth, which is 1540 divided by 0.20 m, or 7700 Hz. The Nyquist limit equals half the PRF, so Doppler shifts above 3850 Hz will alias.

  68. Question 68Physical Principles and Instrumentation

    Using the typical soft-tissue attenuation of 0.5 dB/cm/MHz, what is the half-value layer thickness for a 5 MHz beam?

    1. 1.2 cm Correct answer.
    2. 0.6 cm
    3. 6.0 cm
    4. 2.4 cm

    Explanation

    The half-value layer is the path length over which intensity falls by 3 dB, so it equals 3 dB divided by the attenuation coefficient expressed in dB/cm. At 5 MHz the coefficient is 0.5 × 5 = 2.5 dB/cm, giving 3 / 2.5 = 1.2 cm. Higher frequencies have larger coefficients and therefore thinner half-value layers.

  69. Question 69Doppler and Hemodynamics

    At which angle between the ultrasound beam and the direction of blood flow is the Doppler frequency shift greatest?

    1. 45 degrees
    2. 60 degrees
    3. 0 degrees Correct answer.
    4. 90 degrees

    Explanation

    The Doppler shift is proportional to the cosine of the angle between the beam and flow. Cosine is greatest at 0 degrees, so the detected shift is maximal when the beam is parallel to flow.

  70. Question 70Doppler and Hemodynamics

    For clinical Doppler velocity measurements, the beam-to-vessel angle should ideally be kept at or below what value?

    1. 15 degrees
    2. 90 degrees
    3. 60 degrees Correct answer.
    4. 30 degrees

    Explanation

    Doppler velocity is calculated with the cosine of the beam-to-vessel angle, and cosine changes rapidly near 90 degrees. Keeping the angle at or below 60 degrees limits the error caused by inaccurate angle correction.

  71. Question 71Doppler and Hemodynamics

    Which Doppler mode is not subject to aliasing because it does not use discrete pulses?

    1. Color Doppler
    2. Pulsed wave Doppler
    3. Continuous wave Doppler Correct answer.
    4. Power Doppler

    Explanation

    Continuous wave Doppler transmits and receives continuously, so it is not limited by the Nyquist sampling threshold. It can therefore display very high velocities without aliasing.

  72. Question 72Doppler and Hemodynamics

    The Nyquist limit is equal to which portion of the pulse repetition frequency?

    1. Equal to
    2. One-half Correct answer.
    3. One-quarter
    4. Twice

    Explanation

    According to the sampling theorem, a pulsed system can unambiguously detect Doppler shifts only up to half the pulse repetition frequency. This threshold is called the Nyquist limit.

  73. Question 73Doppler and Hemodynamics

    In standard color Doppler display, flow moving toward the transducer is conventionally encoded as which color?

    1. Blue
    2. Green
    3. Yellow
    4. Red Correct answer.

    Explanation

    The standard color map uses red for flow toward the transducer and blue for flow away from it, often remembered as BART. The color map can be inverted, but this is the conventional default.

  74. Question 74Doppler and Hemodynamics

    According to the simplified Bernoulli equation, the pressure gradient across a stenosis is calculated as which expression when velocity is in m/s?

    1. 4v
    2. v squared divided by 4
    3. 4 times v squared Correct answer.
    4. 2v

    Explanation

    The simplified Bernoulli equation is pressure gradient equals 4 times the square of velocity. This relationship is used to estimate the pressure drop across a stenosis from the peak velocity.

  75. Question 75Doppler and Hemodynamics

    Normal Doppler flow in a patent lower extremity vein is best described as which pattern?

    1. Continuous and nonphasic
    2. Phasic with respiration Correct answer.
    3. Absent during inspiration
    4. Purely pulsatile

    Explanation

    Normal venous flow varies with respiration because intrathoracic and intra-abdominal pressures change during the respiratory cycle. This produces a phasic pattern rather than continuous or strongly pulsatile flow.

  76. Question 76Doppler and Hemodynamics

    Which Doppler technique is least dependent on the angle between the beam and blood flow?

    1. Pulsed wave spectral Doppler
    2. Color Doppler
    3. Continuous wave spectral Doppler
    4. Power Doppler Correct answer.

    Explanation

    Power Doppler encodes the amplitude or integrated power of the Doppler signal rather than the mean frequency shift. This makes it less angle dependent and more sensitive to low flow, although it does not show flow direction.

  77. Question 77Doppler and Hemodynamics

    Which adjustment is most likely to eliminate aliasing on a pulsed wave spectral Doppler tracing?

    1. Raise the pulse repetition frequency Correct answer.
    2. Increase the transmitted frequency
    3. Increase the Doppler gain
    4. Increase the sample volume depth

    Explanation

    Aliasing occurs when the Doppler shift exceeds the Nyquist limit, which is half the pulse repetition frequency. Raising the PRF increases the Nyquist limit and allows higher velocities to be displayed without wrap-around.

  78. Question 78Doppler and Hemodynamics

    The Doppler frequency shift is directly proportional to which parameter?

    1. Transmitted frequency Correct answer.
    2. Pulse repetition frequency
    3. Doppler gain
    4. Depth of the sample volume

    Explanation

    The Doppler equation shows that the frequency shift is proportional to the transmitted frequency, the blood velocity, and the cosine of the Doppler angle. Depth, PRF, and gain do not change the physical shift for a given velocity and angle.

  79. Question 79Doppler and Hemodynamics

    If the Doppler angle is 60 degrees, the detected frequency shift is what fraction of the shift that would be detected at 0 degrees for the same flow?

    1. Equal
    2. One-half Correct answer.
    3. Twice
    4. One-fourth

    Explanation

    The frequency shift is proportional to the cosine of the Doppler angle. The cosine of 60 degrees is 0.5, so the detected shift is half of what it would be at 0 degrees.

  80. Question 80Doppler and Hemodynamics

    As the Doppler sample volume is moved deeper into tissue during pulsed wave Doppler, what happens to the maximum available pulse repetition frequency?

    1. It becomes equal to the Nyquist limit
    2. It decreases Correct answer.
    3. It remains unchanged
    4. It increases

    Explanation

    Pulsed Doppler must wait for echoes to return before sending another pulse. A deeper sample volume lengthens the round-trip time, so the maximum PRF that can be used without range ambiguity decreases.

  81. Question 81Doppler and Hemodynamics

    Continuous wave Doppler can interrogate flow at high velocities without aliasing, but it has which major limitation?

    1. It requires a very low PRF
    2. It cannot detect low velocities
    3. It has no range resolution Correct answer.
    4. It cannot measure velocity direction

    Explanation

    Continuous wave Doppler receives echoes from the entire beam path at all times, so it cannot determine the depth of the detected flow. It provides velocity information but lacks range resolution.

  82. Question 82Doppler and Hemodynamics

    Spectral broadening of a pulsed Doppler waveform is most consistent with which flow condition?

    1. Laminar flow
    2. Turbulent flow Correct answer.
    3. Flow perpendicular to the beam
    4. Absence of flow

    Explanation

    Turbulent flow contains a wide range of velocities and directions within the sample volume. This produces a broadened Doppler spectrum instead of a narrow, well-defined envelope.

  83. Question 83Doppler and Hemodynamics

    What is the primary purpose of the wall filter in Doppler ultrasound?

    1. To remove high-velocity signals from the center of the vessel
    2. To increase the pulse repetition frequency during spectral acquisition
    3. To suppress low-frequency signals from moving vessel walls Correct answer.
    4. To correct the Doppler angle automatically during measurement

    Explanation

    Moving vessel walls and surrounding tissue produce strong, low-frequency Doppler signals that can obscure blood flow. The wall filter removes these low-shift, high-amplitude signals.

  84. Question 84Doppler and Hemodynamics

    Shifting the spectral Doppler baseline is most useful for which purpose?

    1. Removing the wall filter entirely
    2. Improving lateral resolution at depth
    3. Increasing the transmitted frequency
    4. Reducing aliasing on the display Correct answer.

    Explanation

    Baseline shift repositions the displayed velocity range so that higher velocities in one direction can be shown without wrap-around. It does not change the actual PRF or eliminate aliasing physically.

  85. Question 85Doppler and Hemodynamics

    Enlarging the color Doppler box while all other settings remain unchanged has what effect?

    1. It decreases the color frame rate Correct answer.
    2. It increases the Nyquist limit
    3. It eliminates aliasing
    4. It increases the color frame rate

    Explanation

    A larger color box requires more pulses and processing per frame, so the color frame rate falls. This tradeoff is important when trying to capture rapidly changing flow.

  86. Question 86Doppler and Hemodynamics

    Which vessel typically shows a low-resistance Doppler waveform with continuous forward diastolic flow?

    1. Internal carotid artery Correct answer.
    2. Resting femoral artery
    3. External carotid artery
    4. Brachial artery

    Explanation

    The internal carotid artery supplies the brain, a low-resistance vascular bed, so it normally shows continuous forward flow throughout diastole. Vessels supplying resting muscle or the face typically have higher resistance.

  87. Question 87Doppler and Hemodynamics

    The resistive index (RI) is calculated using which formula?

    1. (PSV - EDV)/PSV Correct answer.
    2. PSV/EDV
    3. (PSV + EDV)/PSV
    4. EDV/PSV

    Explanation

    The resistive index compares the difference between peak systolic and end-diastolic velocities to the peak systolic velocity. It is calculated as peak systolic velocity minus end-diastolic velocity, divided by peak systolic velocity.

  88. Question 88Doppler and Hemodynamics

    According to Poiseuille's law, volume flow through a vessel is proportional to which power of the vessel radius?

    1. Fourth power Correct answer.
    2. Third power
    3. First power
    4. Second power

    Explanation

    Poiseuille's law states that volume flow is proportional to the fourth power of the vessel radius. Small changes in radius therefore produce large changes in flow.

  89. Question 89Doppler and Hemodynamics

    A pulsed Doppler system uses a 5 MHz transducer, a PRF of 5 kHz, and a 0-degree angle. What is the highest blood velocity that can be displayed without aliasing? (Use c = 1540 m/s.)

    1. 77 cm/s
    2. 154 cm/s
    3. 38 cm/s Correct answer.
    4. 19 cm/s

    Explanation

    The Nyquist limit is half the PRF, or 2500 Hz. Rearranging the Doppler equation gives velocity equal to the Nyquist limit times c divided by twice the transmitted frequency, which is about 0.385 m/s, or 38 cm/s.

  90. Question 90Doppler and Hemodynamics

    To avoid aliasing at a peak velocity of 1.0 m/s with a 2 MHz transducer at 0 degrees, what PRF is required? (Use c = 1540 m/s.)

    1. About 5.2 kHz Correct answer.
    2. About 10.4 kHz
    3. About 1.3 kHz
    4. About 2.6 kHz

    Explanation

    At 0 degrees, the maximum unaliased velocity equals PRF times c divided by four times the transmitted frequency. Rearranging gives a required PRF of about 4 times 2,000,000 times 1.0 divided by 1540, or roughly 5.2 kHz.

  91. Question 91Doppler and Hemodynamics

    A 3 MHz probe insonates blood moving at 50 cm/s directly toward it at 0 degrees. What Doppler shift is detected? (Use c = 1540 m/s.)

    1. About 3.90 kHz
    2. About 0.97 kHz
    3. About 1.95 kHz Correct answer.
    4. About 7.80 kHz

    Explanation

    The Doppler shift equals twice the transmitted frequency times velocity times cosine of the angle, divided by the speed of sound. Substituting 3 MHz, 0.5 m/s, and a cosine of 1 gives about 1948 Hz, or roughly 1.95 kHz.

  92. Question 92Doppler and Hemodynamics

    A Doppler mirror-image artifact appears as a duplicate vessel signal at twice the depth of the real vessel. What most commonly produces this artifact?

    1. A Doppler angle of 90 degrees
    2. An excessively low wall filter
    3. A very high pulse repetition frequency
    4. A strong reflector along the beam path Correct answer.

    Explanation

    A strong reflector can cause the Doppler signal to travel an extra round trip before returning to the transducer. The system interprets this longer travel time as a duplicate signal at twice the true depth.

  93. Question 93Doppler and Hemodynamics

    A vessel with a 1.0 cm diameter has a mean blood velocity of 50 cm/s. What is the approximate volume flow? (Area of a circle = pi times r squared.)

    1. About 0.4 L/min
    2. About 2.4 L/min Correct answer.
    3. About 24 L/min
    4. About 39 L/min

    Explanation

    The radius is 0.5 cm, so the cross-sectional area is about 0.785 cm squared. Multiplying by the mean velocity of 50 cm/s gives about 39 cm cubed per second, which converts to approximately 2.4 L/min.

  94. Question 94Doppler and Hemodynamics

    At what Doppler angle does the detected frequency shift become zero?

    1. 30 degrees
    2. 0 degrees
    3. 90 degrees Correct answer.
    4. 60 degrees

    Explanation

    The Doppler shift is proportional to the cosine of the angle between the beam and blood flow. The cosine of 90 degrees is zero, so no detectable shift is produced.

  95. Question 95Doppler and Hemodynamics

    Which limitation is associated with power Doppler imaging?

    1. It does not display flow direction Correct answer.
    2. It always aliases at low velocities
    3. It cannot detect low-velocity flow
    4. It requires a sterile probe cover

    Explanation

    Power Doppler displays the amplitude of Doppler signals rather than their velocity or direction. It is sensitive to slow flow but cannot show whether flow is toward or away from the transducer.

  96. Question 96Doppler and Hemodynamics

    Which feature is characteristic of continuous wave Doppler?

    1. It raises the PRF above the Nyquist limit
    2. It uses a single crystal in pulse-echo mode
    3. It gates returning echoes at multiple selected depths
    4. It uses separate crystals continuously Correct answer.

    Explanation

    Continuous wave Doppler uses one crystal to transmit continuously and another to receive continuously. This allows high-velocity measurement without aliasing but provides no depth resolution.

  97. Question 97Doppler and Hemodynamics

    In vascular ultrasound, what does duplex imaging mean?

    1. B-mode imaging combined with Doppler Correct answer.
    2. Color Doppler without spectral display
    3. Spectral Doppler without imaging
    4. Power Doppler with contrast

    Explanation

    Duplex ultrasound combines real-time B-mode imaging with Doppler interrogation. The B-mode image guides placement of the Doppler sample volume or color box.

  98. Question 98Doppler and Hemodynamics

    On a standard color Doppler map, what does red typically indicate?

    1. Flow away from the transducer
    2. Turbulent flow only
    3. Flow toward the transducer Correct answer.
    4. Flow at 90 degrees to the beam

    Explanation

    By convention, the standard color map assigns red to flow toward the transducer and blue to flow away. The assignment can be reversed by changing the color map.

  99. Question 99Doppler and Hemodynamics

    On a spectral Doppler display, what does the baseline represent?

    1. Mean velocity
    2. Nyquist limit
    3. Zero velocity Correct answer.
    4. Peak systolic velocity

    Explanation

    The baseline marks the zero-frequency-shift position on the spectral display. Waveforms above and below it indicate flow in opposite directions relative to the transducer.

  100. Question 100Doppler and Hemodynamics

    What does the position of the Doppler sample gate determine?

    1. The wall filter cutoff value
    2. Depth of velocity sampling Correct answer.
    3. The thermal index of the study
    4. The color map that is selected

    Explanation

    The sample gate is placed along the Doppler beam at the depth where velocities are measured. Moving the gate changes which portion of the vessel or jet is interrogated.

  101. Question 101Doppler and Hemodynamics

    A triphasic arterial Doppler waveform most likely indicates which condition?

    1. An arteriovenous fistula
    2. A severe stenotic lesion
    3. Normal high resistance Correct answer.
    4. A low-resistance flow pattern

    Explanation

    A triphasic waveform has a sharp systolic peak, early diastolic flow reversal, and late diastolic forward flow. This pattern is typical of a normal high-resistance artery supplying a resting limb.

  102. Question 102Doppler and Hemodynamics

    Aliasing occurs when the Doppler shift exceeds which limit?

    1. Twice the pulse repetition frequency
    2. Half the pulse repetition frequency Correct answer.
    3. The transducer frequency
    4. The wall filter setting

    Explanation

    The Nyquist limit equals half the pulse repetition frequency. When the Doppler shift exceeds this limit, the displayed velocity wraps to the opposite side of the scale.

  103. Question 103Doppler and Hemodynamics

    At a fixed PRF and angle, what happens when transducer frequency is increased for a given blood velocity?

    1. Shift decreases and aliasing is less likely
    2. Doppler shift is unchanged
    3. Aliasing is eliminated
    4. Shift increases and aliasing is more likely Correct answer.

    Explanation

    The Doppler shift is directly proportional to the transmitted frequency. A higher frequency therefore produces a larger shift and makes aliasing more likely at the same PRF.

  104. Question 104Doppler and Hemodynamics

    Increasing color Doppler line density while other settings are unchanged has what effect?

    1. It increases the Nyquist limit
    2. It increases frame rate
    3. It reduces frame rate Correct answer.
    4. It eliminates aliasing

    Explanation

    More color lines must be processed to create each frame, which takes more time. The result is a lower color frame rate.

  105. Question 105Doppler and Hemodynamics

    If the angle cursor is set to 60 degrees but the true Doppler angle is 30 degrees, how is the reported velocity affected?

    1. Unchanged
    2. Reported as zero
    3. Overestimated Correct answer.
    4. Underestimated

    Explanation

    The machine divides by the cosine of the set angle. Because the cosine of 60 degrees is smaller than the cosine of 30 degrees, the denominator is too small and the calculated velocity is too high.

  106. Question 106Doppler and Hemodynamics

    Turbulent flow is generally expected when the Reynolds number exceeds approximately which value?

    1. 500
    2. 10000
    3. 2000 Correct answer.
    4. 100

    Explanation

    In straight tubes, flow tends to become turbulent when the Reynolds number exceeds about 2000. Higher values indicate a greater likelihood of turbulence.

  107. Question 107Doppler and Hemodynamics

    If a vessel diameter decreases by half and flow is steady, what happens to average velocity at the narrowing?

    1. It remains unchanged
    2. It quadruples Correct answer.
    3. It doubles
    4. It halves

    Explanation

    By the continuity equation, flow equals area times velocity. Halving the diameter reduces area to one quarter, so velocity must increase fourfold to maintain the same flow.

  108. Question 108Doppler and Hemodynamics

    The pulsatility index (PI) is calculated using which formula?

    1. PSV / EDV, the systolic-diastolic ratio
    2. (PSV - EDV) / PSV, which is the resistive index
    3. (PSV - EDV) / mean velocity Correct answer.
    4. (PSV - EDV) / EDV, a diastolic ratio

    Explanation

    The pulsatility index equals the difference between peak systolic and end-diastolic velocity divided by mean velocity. It reflects the degree of pulsatility in the waveform.

  109. Question 109Doppler and Hemodynamics

    Loss of normal respiratory phasicity in a lower extremity vein most suggests which finding?

    1. A normal physiologic variant
    2. Arterial occlusion distal to it
    3. Distal signal attenuation
    4. Proximal obstruction Correct answer.

    Explanation

    Normal limb venous flow varies with respiration because pressure changes are transmitted from the right heart. Continuous, nonphasic flow suggests an obstruction between the sample site and the heart.

  110. Question 110Doppler and Hemodynamics

    What is the effect of setting the wall filter too high during venous spectral Doppler?

    1. Slow venous flow may be removed Correct answer.
    2. Aliasing in the spectral trace is eliminated
    3. The sample volume depth increases substantially
    4. The Doppler angle is corrected automatically

    Explanation

    The wall filter rejects low-frequency Doppler shifts, including those from slow blood flow. If the cutoff is too high, low-velocity venous signals can be filtered out of the display.

  111. Question 111Doppler and Hemodynamics

    On a color Doppler variance map, what does a bright green or yellow color usually represent?

    1. Turbulent flow Correct answer.
    2. Flow toward the transducer
    3. Flow at exactly 90 degrees
    4. Absence of flow

    Explanation

    Variance maps add a color such as green or yellow to indicate a wide range of velocities within the sample. This is commonly seen with turbulence or disturbed flow.

  112. Question 112Doppler and Hemodynamics

    Increasing the size of the pulsed Doppler sample volume most likely causes which change?

    1. More spectral broadening Correct answer.
    2. A noticeably narrower spectral trace
    3. A higher Nyquist limit overall
    4. Elimination of wall motion artifact

    Explanation

    A larger sample volume includes a wider range of blood velocities and may also include vessel wall motion. This produces a broader, more filled-in spectral waveform.

  113. Question 113Doppler and Hemodynamics

    Why is the color box steered in a linear array during vascular imaging?

    1. To increase the pulse repetition frequency automatically
    2. To eliminate the need for angle correction
    3. To reduce the thermal index of the study
    4. To obtain a useful Doppler angle Correct answer.

    Explanation

    Vessels that run parallel to the skin are nearly perpendicular to an unsteered linear beam, producing little Doppler shift. Steering the color box creates an oblique angle so flow can be detected.

  114. Question 114Doppler and Hemodynamics

    A tardus-parvus waveform is found distal to a stenosis. Which feature best describes it?

    1. High-velocity turbulent jet
    2. Sharp systolic peak with diastolic reversal
    3. Dampened upstroke with low velocity Correct answer.
    4. Absent diastolic flow

    Explanation

    Downstream of a hemodynamically significant stenosis, the systolic upstroke becomes delayed and dampened. The waveform is described as tardus-parvus because of the slow acceleration and low peak velocity.

  115. Question 115Doppler and Hemodynamics

    What is the main trade-off when using high pulse repetition frequency Doppler to raise the Nyquist limit?

    1. Reduced Doppler angle accuracy
    2. Range ambiguity from multiple depths Correct answer.
    3. An increased wall filter cutoff value
    4. Loss of Doppler shift sensitivity overall

    Explanation

    High-PRF Doppler emits pulses so rapidly that echoes from one pulse may return after the next pulse has been sent. The system can then assign echoes to the wrong depth, producing range ambiguity.

  116. Question 116Doppler and Hemodynamics

    Why does spectral Doppler generally produce a higher thermal index than B-mode at similar output?

    1. It concentrates energy at one gate Correct answer.
    2. It uses a lower transducer frequency
    3. It has no adjustable wall filter
    4. It always uses continuous wave

    Explanation

    Pulsed spectral Doppler dwells at a selected gate and repeatedly insonates the same region. This higher time-averaged intensity can raise the thermal index compared with a sweeping B-mode image.

  117. Question 117Doppler and Hemodynamics

    In color Doppler, autocorrelation is used primarily to estimate which parameter?

    1. The thermal index
    2. Mean velocity, variance Correct answer.
    3. The wall filter cutoff
    4. The transducer frequency

    Explanation

    Color Doppler uses autocorrelation of consecutive echoes to estimate mean velocity and variance. These estimates are then converted into the color display.

  118. Question 118Doppler and Hemodynamics

    When measuring peak velocity in a stenotic jet, placing the sample gate just proximal to the narrowing most likely produces what result?

    1. A tardus-parvus waveform pattern
    2. Complete elimination of spectral broadening
    3. Underestimation of peak velocity Correct answer.
    4. Overestimation of the true peak velocity

    Explanation

    The highest velocity occurs at the narrowest point of the stenosis. A gate placed proximal to the narrowing samples pre-stenotic flow and therefore underestimates the true jet velocity.

  119. Question 119Doppler and Hemodynamics

    On a standard color velocity map, which color conventionally represents flow directed toward the transducer?

    1. Red Correct answer.
    2. Blue
    3. Yellow
    4. Green

    Explanation

    Standard color maps follow the BART convention (blue away, red toward), so flow approaching the transducer is displayed in red, with color brightness increasing with velocity magnitude toward the top of the scale.

  120. Question 120Doppler and Hemodynamics

    A Doppler beam intersects a vessel at an angle of 90 degrees. What Doppler shift will be detected?

    1. A shift equal to the transmitted frequency
    2. Half the true shift
    3. Maximum positive shift
    4. Zero shift Correct answer.

    Explanation

    The Doppler equation contains a cosine term for the angle between beam and flow; at 90 degrees the cosine is zero, so no measurable shift is produced even though blood is moving. This is why the angle must be kept well below 90 degrees, ideally 60 degrees or less.

  121. Question 121Doppler and Hemodynamics

    Which statement best describes power Doppler imaging?

    1. It displays flow direction with a bipolar color scale
    2. It has a higher frame rate than color Doppler
    3. It measures peak velocity quantitatively
    4. It is relatively independent of the Doppler angle Correct answer.

    Explanation

    Power Doppler encodes the integrated amplitude (power) of the Doppler signal rather than mean velocity, so its display changes little with the beam-to-vessel angle. It does not show direction and is more sensitive to slow flow, but it is also more vulnerable to motion.

  122. Question 122Doppler and Hemodynamics

    Which vessel normally demonstrates a low-resistance spectral Doppler waveform with continuous forward diastolic flow?

    1. External carotid artery
    2. Brachial artery at rest
    3. Internal carotid artery Correct answer.
    4. Resting common femoral artery

    Explanation

    Low-resistance waveforms are seen in vessels supplying organs that need constant perfusion, such as the brain, kidneys, and liver; the internal carotid artery therefore shows abundant diastolic forward flow.

  123. Question 123Doppler and Hemodynamics

    Which limitation is intrinsic to continuous-wave Doppler?

    1. It cannot be displayed alongside a B-mode image
    2. It requires a range gate positioned on the vessel
    3. It cannot determine the depth of the flow producing the signal Correct answer.
    4. It cannot measure velocities above 2 m/s

    Explanation

    Continuous-wave Doppler transmits and receives simultaneously along the entire beam line, so echoes from all depths are mixed together and no depth information is available. This absence of range resolution is what allows it to measure very high velocities without aliasing.

  124. Question 124Doppler and Hemodynamics

    A 5 MHz transducer insonates blood moving at 50 cm/s with a Doppler angle of 60 degrees. Using a propagation speed of 1540 m/s, what Doppler shift is produced?

    1. About 400 Hz
    2. About 3,200 Hz
    3. About 800 Hz
    4. About 1,600 Hz Correct answer.

    Explanation

    The Doppler equation gives fd = 2 x f0 x v x cos(theta) / c = 2 x 5,000,000 x 0.5 x 0.5 / 1540, which is approximately 1,620 Hz.

  125. Question 125Doppler and Hemodynamics

    Which change will most reduce the frame rate of a color Doppler image?

    1. Reducing the imaging depth
    2. Increasing the color ensemble length Correct answer.
    3. Narrowing the color box width
    4. Reducing the number of scan lines in the box

    Explanation

    Frame rate depends on how many pulses must be transmitted per scan line; lengthening the color ensemble (packet) size multiplies the pulses sent along each line and therefore lowers the frame rate.

  126. Question 126Doppler and Hemodynamics

    A spectral Doppler tracing shows the spectral window completely filled in. Which factor most likely explains this finding?

    1. A Doppler angle of 70 degrees
    2. A wall filter set to a very low value
    3. A sample volume spanning the entire vessel lumen Correct answer.
    4. A small sample volume placed at the vessel center

    Explanation

    A sample volume that covers the full lumen collects a wide range of velocities, from slow flow near the walls to faster flow in the center, and these are displayed together, filling the spectral window. Spectral broadening can also reflect turbulence, but sample-volume size is the common technical cause.

  127. Question 127Doppler and Hemodynamics

    A spectral tracing shows a peak systolic velocity of 80 cm/s and an end-diastolic velocity of 20 cm/s. What is the resistive index?

    1. 0.60
    2. 0.75 Correct answer.
    3. 0.25
    4. 1.33

    Explanation

    The resistive index is (peak systole minus end diastole) divided by peak systole, so (80 - 20) / 80 = 0.75.

  128. Question 128Doppler and Hemodynamics

    If a vessel's radius doubles while the pressure gradient and blood viscosity remain constant, volume flow changes by what factor?

    1. 2
    2. 4
    3. 16 Correct answer.
    4. 8

    Explanation

    Poiseuille's law states that volume flow is proportional to the fourth power of the radius; doubling the radius therefore multiplies flow by 2 to the fourth power, or 16.

  129. Question 129Doppler and Hemodynamics

    During a normal Valsalva maneuver, what happens to flow in the common femoral vein?

    1. Velocity increases markedly
    2. Flow diminishes or temporarily ceases Correct answer.
    3. Flow becomes strongly pulsatile
    4. Flow reverses for the entire maneuver

    Explanation

    Valsalva raises intra-abdominal pressure, which opposes venous return from the legs, so the spectral signal dampens or briefly stops and then resumes with release. This normal response is used to confirm that the vein communicates freely with the abdomen.

  130. Question 130Doppler and Hemodynamics

    Color appears outside the vessel lumen whenever the sonographer moves the transducer. What is this called?

    1. Range ambiguity artifact
    2. Flash artifact Correct answer.
    3. Mirror-image artifact
    4. Aliasing artifact

    Explanation

    Motion of the transducer or of tissue within the color box produces low-amplitude Doppler shifts that are written as color, causing a burst of color outside the vessel known as flash, or motion, artifact. It is reduced by minimizing transducer movement, lowering color gain, or using a higher wall filter.

  131. Question 131Doppler and Hemodynamics

    Excessive color Doppler receiver gain most typically produces which appearance?

    1. Color filling tissue outside the vessel lumen Correct answer.
    2. Color disappearing from within the vessel lumen
    3. Aliasing at the center of the vessel
    4. A marked increase in color frame rate

    Explanation

    Too much color gain amplifies low-level noise and weak Doppler signals from surrounding tissue, so color blooms outside the vessel walls. Gain should be reduced until color just fills the lumen without extending beyond it.

  132. Question 132Doppler and Hemodynamics

    A vessel of 1.0 cm diameter carries flow with a time-averaged mean velocity of 20 cm/s. What is the approximate volume flow?

    1. About 940 mL/min Correct answer.
    2. About 240 mL/min
    3. About 470 mL/min
    4. About 1,900 mL/min

    Explanation

    Volume flow equals time-averaged mean velocity times cross-sectional area. The area is pi x (0.5 cm) squared, or 0.785 cm squared, so flow is 20 x 0.785 = 15.7 mL/s, which is roughly 940 mL/min.

  133. Question 133Doppler and Hemodynamics

    The velocity proximal to a stenosis is 1 m/s and the peak velocity within the stenosis is 3 m/s. Using the simplified Bernoulli equation, what is the pressure gradient across the narrowing?

    1. 36 mmHg
    2. 8 mmHg
    3. 16 mmHg
    4. 32 mmHg Correct answer.

    Explanation

    When the proximal velocity is not negligible, the simplified Bernoulli relation is applied as 4 x (stenotic velocity squared minus proximal velocity squared), here 4 x (9 - 1) = 32 mmHg.

  134. Question 134Doppler and Hemodynamics

    In the superficial veins of the lower extremity, reflux is generally considered present when reversed flow persists longer than which duration?

    1. 1.0 s
    2. 0.5 s Correct answer.
    3. 2.0 s
    4. 0.1 s

    Explanation

    Reflux thresholds are shorter for superficial veins than for deep veins because normal superficial valves close quickly; reversed flow lasting more than about 0.5 s in a superficial vein is accepted as abnormal. Deep veins use a longer threshold of roughly 1 s.

  135. Question 135Quality Assurance, Safety and Artifacts

    The thermal index displayed on an ultrasound system is an estimate of which of the following?

    1. Likelihood of inertial cavitation in gas-containing tissue
    2. Total acoustic power emitted by the transducer
    3. Depth at which beam intensity is halved
    4. Potential temperature rise from absorbed acoustic energy Correct answer.

    Explanation

    The thermal index compares attenuated acoustic power with the power needed to raise tissue temperature by 1 degree Celsius, so it estimates the potential for heating at a given location. It is a relative ratio, not a direct measurement of emitted power, and cavitation risk is described by the mechanical index.

  136. Question 136Quality Assurance, Safety and Artifacts

    The mechanical index is most closely associated with which bioeffect?

    1. Acoustic streaming in blood vessels
    2. Cavitation from inertial bubble collapse Correct answer.
    3. Tissue heating from prolonged exposure
    4. Absorption of energy by bone

    Explanation

    The mechanical index is calculated from peak rarefactional pressure divided by the square root of frequency and is intended to indicate the likelihood of cavitation. Heating and bone absorption are addressed by the thermal indices rather than the mechanical index.

  137. Question 137Quality Assurance, Safety and Artifacts

    In the context of diagnostic ultrasound, the ALARA principle states that exposure should be:

    1. reduced only when the thermal index exceeds 1.0
    2. adjusted upward until tissue harmonics appear
    3. set to the default preset for each examination type
    4. as low as reasonably achievable Correct answer.

    Explanation

    ALARA requires the operator to keep acoustic output and examination time as low as reasonably achievable while still obtaining the needed diagnostic information. There is no fixed index threshold below which exposure is automatically acceptable, and default presets are not necessarily minimized.

  138. Question 138Quality Assurance, Safety and Artifacts

    A fluid-filled structure demonstrates multiple horizontal lines spaced at equal intervals at increasing depths. Which artifact does this describe?

    1. Mirror image
    2. Comet tail
    3. Acoustic shadowing
    4. Reverberation Correct answer.

    Explanation

    Reverberation occurs when the pulse bounces repeatedly between the transducer and a strong reflector, producing a series of echoes at multiples of the reflector distance. The equal spacing is the hallmark of this artifact.

  139. Question 139Quality Assurance, Safety and Artifacts

    Increased echo brightness is seen deep to a simple cyst relative to adjacent tissue at the same depth. This finding is called:

    1. Slice thickness artifact
    2. Posterior acoustic enhancement Correct answer.
    3. Ring-down artifact
    4. Edge shadowing

    Explanation

    Fluid attenuates sound less than solid tissue, so echoes returning from behind a cyst are stronger than those from adjacent tissue at the same depth, producing posterior acoustic enhancement. This is a useful confirmatory sign of a fluid-filled structure.

  140. Question 140Quality Assurance, Safety and Artifacts

    A clean posterior acoustic shadow is most likely produced by which structure?

    1. A simple cyst
    2. The urinary bladder
    3. A patent blood vessel
    4. A gallstone Correct answer.

    Explanation

    Strongly reflecting or attenuating structures such as calculi, calcifications, and bone block sound transmission and create a shadow deep to them. Fluid-filled structures show through-transmission and enhancement instead.

  141. Question 141Quality Assurance, Safety and Artifacts

    The primary purpose of a sonographic quality assurance program is to:

    1. verify that billing codes match the examinations performed
    2. ensure consistent equipment performance and image quality Correct answer.
    3. increase patient throughput in the department
    4. document personnel credentials for accreditation

    Explanation

    Quality assurance programs use routine testing, phantoms, and record keeping to detect equipment degradation before it affects patient care. Credentialing and billing compliance are separate administrative processes, and throughput is not a quality measure.

  142. Question 142Quality Assurance, Safety and Artifacts

    Which action is appropriate for routine care of a diagnostic ultrasound transducer?

    1. Immersing the entire probe in disinfectant after every abdominal examination
    2. Cleaning the faceplate with an abrasive pad to remove gel
    3. Inspecting the housing and cable for cracks before each use Correct answer.
    4. Storing the probe with the cable tightly coiled around the housing

    Explanation

    Routine inspection of the housing, lens, and cable identifies defects that can degrade the image or create an electrical or infection-control hazard. Immersion tolerance and cleaning agents must follow the manufacturer's instructions, and abrasive or tightly coiled storage damages the device.

  143. Question 143Quality Assurance, Safety and Artifacts

    During a third-trimester obstetric examination, the focal zone lies at a fetal bone surface. Which thermal index does the system display?

    1. TIS
    2. MI
    3. TIB Correct answer.
    4. TIC

    Explanation

    The bone thermal index (TIB) is displayed when bone lies in the beam path at or near the focal zone, as in later pregnancy when the beam intersects fetal bone at the focus. TIS applies to soft tissue at the focus, and TIC applies when bone is at the transducer entrance, as in transcranial scanning.

  144. Question 144Quality Assurance, Safety and Artifacts

    For general diagnostic applications other than ophthalmic, the FDA upper limit for the mechanical index is:

    1. 6.0
    2. 1.0
    3. 1.9 Correct answer.
    4. 0.23

    Explanation

    The FDA upper limit for the mechanical index in general applications is 1.9, with a corresponding thermal index limit of 6.0. Ophthalmic applications carry much lower limits because of the presence of gas-like and fluid-filled structures in the eye.

  145. Question 145Quality Assurance, Safety and Artifacts

    Which of the following system controls changes the acoustic output delivered to the patient?

    1. Time-gain compensation
    2. Displayed image depth
    3. Receiver gain
    4. Acoustic output power Correct answer.

    Explanation

    Only the acoustic power control alters the amplitude of the transmitted pulse and therefore patient exposure. Receiver gain, time-gain compensation, and depth settings change how returning echoes are processed and displayed without changing the emitted beam.

  146. Question 146Quality Assurance, Safety and Artifacts

    In a tissue-equivalent phantom, which measurement evaluates the system's ability to separate two reflectors aligned along the axis of the beam?

    1. Elevational resolution
    2. Penetration depth
    3. Axial resolution Correct answer.
    4. Lateral resolution

    Explanation

    Axial resolution describes the minimum separation detectable between two reflectors lying along the beam path and depends mainly on pulse duration and spatial pulse length. Tests use closely spaced targets in line with the beam, whereas lateral and elevational targets lie perpendicular to it.

  147. Question 147Quality Assurance, Safety and Artifacts

    Echoes that appear immediately adjacent to the transducer face and obscure superficial structures describe which artifact?

    1. Dead zone artifact Correct answer.
    2. Acoustic enhancement
    3. Range ambiguity
    4. Far-field dropout

    Explanation

    The dead zone is a region of reverberation and ring-down within the probe and coupling gel that produces spurious echoes in the first few millimeters of tissue. The result is loss of detail in superficial structures, which can be minimized with a standoff pad.

  148. Question 148Quality Assurance, Safety and Artifacts

    Echoes returning from a strong reflector located outside the main beam are displayed as if they arose along the central axis. This describes:

    1. Posterior acoustic shadowing
    2. Side lobe artifact Correct answer.
    3. Mirror-image artifact
    4. Reverberation

    Explanation

    Side lobes and grating lobes are off-axis emissions that can insonify strong reflectors outside the main beam; the system assumes all returning echoes came from the central axis and places them at the wrong location. This produces spurious echoes that may fill an otherwise anechoic structure.

  149. Question 149Quality Assurance, Safety and Artifacts

    Low-level echoes appear to fill a structure that is subsequently confirmed to be anechoic. The most likely explanation is:

    1. Slice thickness artifact Correct answer.
    2. Range ambiguity
    3. Acoustic enhancement
    4. Comet-tail artifact

    Explanation

    Slice thickness artifact occurs because the beam has a finite thickness in the elevational plane, so echoes from adjacent tissue are superimposed on the fluid-filled structure. It is recognized by movement of the internal echoes as the beam is angled through the structure.

  150. Question 150Quality Assurance, Safety and Artifacts

    Spectral Doppler tracing shows the peak velocity wrapping below the baseline. Which adjustment best corrects this problem?

    1. Lower the wall filter to zero
    2. Increase the PRF (scale) Correct answer.
    3. Increase receiver gain
    4. Steer the beam to 90 degrees

    Explanation

    Aliasing occurs when the Doppler shift exceeds the Nyquist limit, which is half the pulse repetition frequency. Raising the scale or PRF increases the Nyquist limit so the peak shift can be displayed without wrapping.

  151. Question 151Quality Assurance, Safety and Artifacts

    Which structure classically produces a comet-tail artifact?

    1. A simple hepatic cyst
    2. Gas within the bowel
    3. Cholesterol crystals Correct answer.
    4. A calcified gallstone

    Explanation

    Comet tail is a form of reverberation arising from small, highly reflective structures such as cholesterol crystals in gallbladder adenomyomatosis or from metallic objects. It appears as a narrow band of echoes that tapers with depth.

  152. Question 152Quality Assurance, Safety and Artifacts

    A vessel imaged above the diaphragm appears to be duplicated below the diaphragm, where no real vessel exists. This is:

    1. Mirror-image artifact Correct answer.
    2. Range ambiguity
    3. Ring-down artifact
    4. Reverberation within the liver

    Explanation

    A large specular reflector such as the diaphragm can act as a mirror, so echoes travel an extra round trip before returning to the transducer. The added path length makes the duplicate appear deeper than the reflector.

  153. Question 153Quality Assurance, Safety and Artifacts

    Vertical bands of alternating bright and dark echoes appear across the entire image and persist when the transducer is not moved. This most likely represents:

    1. Comet-tail artifact
    2. Slice thickness artifact
    3. Acoustic enhancement
    4. Electrical interference Correct answer.

    Explanation

    Electrical interference produces a herringbone or banded pattern that is not related to the anatomy being scanned and often resolves when the interfering source is removed or shielded. Its presence across the whole image and independence from probe movement distinguish it from acoustic artifacts.

  154. Question 154Quality Assurance, Safety and Artifacts

    Which exposure condition most favors a thermal bioeffect?

    1. Low acoustic output with high receiver gain
    2. A short pulse duration with a low duty factor
    3. A high peak pressure in tissue containing gas nuclei
    4. A high duty factor with high time-averaged intensity Correct answer.

    Explanation

    Tissue heating depends on time-averaged intensity, absorption, beam area, and exposure duration, so long pulses and high duty factors favor temperature elevation. Peak pressure and gas nuclei relate to cavitation rather than to heating.

  155. Question 155Quality Assurance, Safety and Artifacts

    Which combination of conditions most favors inertial cavitation?

    1. Low frequency, high peak pressure, and gas nuclei Correct answer.
    2. Low frequency with low peak pressure and high receiver gain
    3. High frequency with continuous wave and high duty factor
    4. High frequency, low peak pressure, fully degassed tissue

    Explanation

    The cavitation threshold decreases as frequency falls, as peak rarefactional pressure rises, and when gas nuclei are present in the tissue or contrast agent. Higher frequencies raise the threshold and make cavitation less likely.

  156. Question 156Quality Assurance, Safety and Artifacts

    During annual performance testing, a phantom shows that the displayed distance between two reflectors is consistently greater than their known separation. This finding most strongly indicates:

    1. An error in depth calibration Correct answer.
    2. A reduction in acoustic output
    3. Degraded axial resolution
    4. An error in the TGC slope

    Explanation

    Distance accuracy is verified using targets of known separation; a consistent proportional error indicates that the system's depth scale or assumed propagation speed is incorrect. This is a calibration problem requiring service correction rather than a display or output adjustment.

  157. Question 157Quality Assurance, Safety and Artifacts

    A structure lying deep to a region of fatty tissue is displayed deeper than its true position. The most likely explanation is:

    1. Posterior acoustic enhancement
    2. Acoustic shadowing
    3. Propagation speed error Correct answer.
    4. Range ambiguity

    Explanation

    Ultrasound systems assume a propagation speed of 1,540 m/s; fat conducts sound at about 1,450 m/s, so the round-trip time is longer than expected and the reflector is placed deeper on the display. The effect also distorts the shape and thickness of structures such as the liver.

  158. Question 158Quality Assurance, Safety and Artifacts

    When the pulse repetition frequency is too high for the depth being imaged, echoes from an earlier pulse are received after a later pulse has been transmitted and are assigned an incorrect shallow depth. This artifact is called:

    1. Mirror-image artifact
    2. Side lobe artifact
    3. Range ambiguity Correct answer.
    4. Aliasing

    Explanation

    Range ambiguity occurs when the interval between pulses is shorter than the round-trip time to the deepest structure, so returning echoes are misinterpreted as belonging to the most recent pulse. Reducing the pulse repetition frequency or limiting the field of view prevents it.

  159. Question 159Quality Assurance, Safety and Artifacts

    During a contrast-enhanced ultrasound study, which adjustment best preserves microbubbles while maintaining contrast enhancement?

    1. Lower the mechanical index Correct answer.
    2. Increase the frame rate to its maximum
    3. Switch to continuous-wave transmission
    4. Increase the mechanical index to 1.9

    Explanation

    Microbubble agents are disrupted by high peak rarefactional pressures, so contrast-specific modes use low mechanical index settings to preserve the bubbles for continuous enhancement. High mechanical index exposures are used deliberately when bubble destruction is desired.

  160. Question 160Quality Assurance, Safety and Artifacts

    The ALARA principle in diagnostic ultrasound requires that acoustic exposure be:

    1. minimized while preserving diagnostic information Correct answer.
    2. applied only after a thermal index alarm
    3. fixed at the system default output setting
    4. maximized to improve image contrast

    Explanation

    ALARA stands for as low as reasonably achievable. The operator should use the lowest output and shortest exposure time that still produce the diagnostic information needed. Default settings are not automatically ALARA for every patient.

  161. Question 161Quality Assurance, Safety and Artifacts

    A fluid-filled cyst transmits sound with little attenuation, so tissues deep to the cyst appear brighter. This artifact is called:

    1. ring-down artifact
    2. acoustic shadowing
    3. reverberation
    4. posterior acoustic enhancement Correct answer.

    Explanation

    Fluid attenuates sound less than surrounding soft tissue, so echoes returning from deep tissues are stronger and appear brighter. This through-transmission effect is posterior acoustic enhancement.

  162. Question 162Quality Assurance, Safety and Artifacts

    Which on-screen index estimates the temperature rise in soft tissue when no bone is at the focal zone?

    1. thermal index for cranial bone (TIC)
    2. mechanical index (MI)
    3. thermal index for bone (TIB)
    4. thermal index for soft tissue (TIS) Correct answer.

    Explanation

    The soft-tissue thermal index, TIS, estimates heating in soft tissue when bone is not at the focus. TIB and TIC are used when bone is at the focus or in cranial applications.

  163. Question 163Quality Assurance, Safety and Artifacts

    Brief bursts of color across the entire color Doppler image caused by rapid transducer movement are called:

    1. twinkling
    2. aliasing
    3. motion ghost
    4. flash artifact Correct answer.

    Explanation

    Flash artifact is a color Doppler artifact produced by sudden transducer or tissue motion. It appears as brief color flashes that are not confined to a vessel.

  164. Question 164Quality Assurance, Safety and Artifacts

    In a tissue-equivalent phantom, which measurement determines the closest distance from the transducer at which echoes can be resolved?

    1. lateral resolution
    2. dead zone Correct answer.
    3. focal zone length
    4. dynamic range

    Explanation

    The dead zone is the near-field region where the transducer cannot separate close echoes from the pulse itself. It is measured as the minimum distance at which resolvable echoes begin.

  165. Question 165Quality Assurance, Safety and Artifacts

    Which element is essential in a quality assurance program when an equipment problem is identified?

    1. a new transducer purchase order
    2. deletion of the test from the schedule
    3. verbal notification to the sonographer
    4. documented corrective action with follow-up testing Correct answer.

    Explanation

    Quality assurance requires that problems be documented, corrected, and then retested to confirm the fix. Verbal notification alone does not provide a traceable record.

  166. Question 166Quality Assurance, Safety and Artifacts

    Which practice best supports patient safety during a diagnostic ultrasound examination?

    1. using the highest output for every patient
    2. ignoring the displayed thermal index
    3. scanning for as long as the room is available
    4. limiting scanning time to diagnostic need Correct answer.

    Explanation

    Exposure depends on output and time, so scanning only as long as needed reduces dose. The operator should monitor displayed safety indices while optimizing the image.

  167. Question 167Quality Assurance, Safety and Artifacts

    An artifact that appears as a series of parallel bands behind gas and results from resonant vibration of bubbles is:

    1. slice-thickness artifact
    2. ring-down artifact Correct answer.
    3. mirror-image artifact
    4. shadowing artifact

    Explanation

    Ring-down artifact occurs when gas bubbles resonate after the pulse and continue to emit sound. The system displays this as a series of parallel bands deep to the gas.

  168. Question 168Quality Assurance, Safety and Artifacts

    A curved interface bends the sound beam so that a structure appears duplicated or displaced laterally. This artifact is caused by:

    1. attenuation
    2. aliasing
    3. cavitation
    4. refraction Correct answer.

    Explanation

    Refraction is a change in beam direction when sound crosses an interface between media with different propagation speeds. A curved refracting interface can displace or duplicate the apparent position of structures.

  169. Question 169Quality Assurance, Safety and Artifacts

    If sound travels faster through a solid mass than the assumed soft-tissue speed of 1540 m/s, the mass will appear:

    1. deeper than its true location
    2. shallower than its true location Correct answer.
    3. anechoic
    4. wider than its true width

    Explanation

    The system converts echo return time to depth using an assumed speed of 1540 m/s. If sound actually travels faster, echoes return sooner and the structure is placed too shallowly.

  170. Question 170Quality Assurance, Safety and Artifacts

    Which transducer design feature most reduces grating lobe artifacts?

    1. increasing element spacing
    2. subdicing the elements Correct answer.
    3. raising the pulse repetition frequency
    4. increasing the transmit power

    Explanation

    Grating lobes arise from periodic spacing of array elements. Subdicing divides each element into smaller subelements, which suppresses these off-axis lobes.

  171. Question 171Quality Assurance, Safety and Artifacts

    In a tissue-equivalent phantom, which measurement determines the greatest depth at which echo signals can still be detected?

    1. dead zone
    2. contrast resolution
    3. penetration depth Correct answer.
    4. axial resolution

    Explanation

    Penetration depth is the maximum depth at which useful echoes remain detectable in the phantom. It reflects system sensitivity and attenuation under the test conditions.

  172. Question 172Quality Assurance, Safety and Artifacts

    Alternating red and blue color Doppler signal behind a rough calcification, without true flow, is called:

    1. aliasing
    2. twinkling artifact Correct answer.
    3. flash artifact
    4. motion ghost

    Explanation

    Twinkling artifact is a rapidly alternating color signal seen behind rough, strongly reflecting structures such as calcifications. It does not represent true blood flow.

  173. Question 173Quality Assurance, Safety and Artifacts

    Which condition most lowers the threshold for inertial cavitation?

    1. gas bodies or microbubbles Correct answer.
    2. lower peak rarefactional pressure
    3. higher transducer frequency
    4. increased tissue attenuation

    Explanation

    Inertial cavitation requires gas nuclei that can expand and collapse. Pre-existing gas bodies, including contrast microbubbles, greatly lower the pressure needed to initiate it.

  174. Question 174Quality Assurance, Safety and Artifacts

    The mechanical index is most directly related to which acoustic quantity?

    1. temporal-average intensity
    2. spatial-peak pulse-average intensity
    3. peak rarefactional pressure Correct answer.
    4. total acoustic power

    Explanation

    MI is based on the peak rarefactional pressure and frequency. It is intended to estimate the potential for nonthermal cavitation effects.

  175. Question 175Quality Assurance, Safety and Artifacts

    Which device is used to measure the total acoustic power output of a transducer?

    1. hydrophone scanning tank
    2. radiation force balance Correct answer.
    3. string Doppler phantom
    4. tissue-equivalent phantom

    Explanation

    A radiation force balance measures the force exerted by the acoustic beam, which is converted to total acoustic power. Hydrophones map pressure fields rather than total power.

  176. Question 176Quality Assurance, Safety and Artifacts

    A phantom image shows poor differentiation of low-level echoes from background. Which system setting should be evaluated?

    1. color write priority
    2. pulse repetition frequency
    3. Doppler gain
    4. dynamic range Correct answer.

    Explanation

    Dynamic range controls the range of echo amplitudes that are displayed and compressed. An inappropriate setting can reduce visible low-level contrast.

  177. Question 177Quality Assurance, Safety and Artifacts

    Which quality assurance test uses a moving string or belt target?

    1. Doppler velocity accuracy Correct answer.
    2. dead-zone measurement
    3. thermal index calibration
    4. axial resolution measurement

    Explanation

    A moving string or belt provides a known target velocity for checking Doppler accuracy. The measured velocity is compared with the known speed of the moving target.

  178. Question 178Quality Assurance, Safety and Artifacts

    Acoustic streaming is best described as:

    1. a thermal effect from absorbed energy
    2. fluid flow produced by acoustic radiation force Correct answer.
    3. reflection at an impedance boundary
    4. bubble collapse during inertial cavitation

    Explanation

    Acoustic streaming is bulk fluid movement caused by radiation force from the sound beam. It is a mechanical bioeffect rather than a heating effect.

  179. Question 179Quality Assurance, Safety and Artifacts

    Which intensity parameter is most closely associated with tissue heating?

    1. peak rarefactional pressure
    2. temporal-average intensity Correct answer.
    3. mechanical index
    4. pulse repetition frequency

    Explanation

    Heating depends on energy deposited over time, so time-averaged intensity is the key parameter. Peak rarefactional pressure and MI relate more to cavitation.

  180. Question 180Quality Assurance, Safety and Artifacts

    The mechanical index is calculated as peak rarefactional pressure divided by the square root of which parameter?

    1. ultrasound frequency Correct answer.
    2. pulse duration
    3. tissue attenuation
    4. beam width

    Explanation

    The MI formula uses peak rarefactional pressure divided by the square root of the center frequency. Higher frequency lowers MI for the same negative pressure.

  181. Question 181Quality Assurance, Safety and Artifacts

    Why does a high mechanical index increase the risk of inertial cavitation?

    1. It produces stronger negative pressure for bubble collapse. Correct answer.
    2. It reduces the peak rarefactional pressure.
    3. It increases the number of scan lines per frame.
    4. It raises the time-averaged intensity and heats tissue.

    Explanation

    High MI reflects a large peak rarefactional pressure. The strong negative phase expands gas bubbles, which then collapse violently during the positive phase.

  182. Question 182Quality Assurance, Safety and Artifacts

    Which phantom test evaluates the system's ability to distinguish low-contrast objects from surrounding background?

    1. axial resolution
    2. lateral resolution
    3. contrast resolution Correct answer.
    4. dead zone

    Explanation

    Contrast resolution describes the ability to detect objects whose echo amplitude differs only slightly from background. Phantoms with low-contrast targets test this capability.

  183. Question 183Quality Assurance, Safety and Artifacts

    The thermal index displayed on an ultrasound system is best described as:

    1. estimated microbubble destruction
    2. measured peak negative pressure
    3. estimated temperature rise in degrees Celsius Correct answer.
    4. measured total acoustic power

    Explanation

    The thermal index estimates the temperature rise under a specified tissue model, expressed in degrees Celsius. It guides the operator in managing thermal exposure.

  184. Question 184Quality Assurance, Safety and Artifacts

    During QA testing, a transducer is found to have delamination of its face. What is the most appropriate action?

    1. document the finding and retest in one year
    2. continue use but increase output
    3. clean the face and return it to service
    4. remove it from service until repaired Correct answer.

    Explanation

    Delamination is a physical defect that can degrade the acoustic beam and may pose an electrical or infection-control risk. The transducer should be taken out of service until repaired or replaced.

  185. Question 185Quality Assurance, Safety and Artifacts

    The ALARA principle in ultrasound practice means keeping exposure:

    1. at the lowest output that yields any image
    2. as low as reasonably achievable Correct answer.
    3. constant for every patient and examination
    4. at the maximum output the system allows

    Explanation

    ALARA is a guiding principle stating that exposure should be kept as low as reasonably achievable while still obtaining the needed diagnostic information. It applies to all imaging modes and requires balancing output and scanning time against the clinical question.

  186. Question 186Quality Assurance, Safety and Artifacts

    Which displayed index estimates the potential for cavitation?

    1. Thermal index for bone
    2. Thermal index for soft tissue
    3. Thermal index for cranial
    4. Mechanical index Correct answer.

    Explanation

    The mechanical index estimates the likelihood of cavitation from peak rarefactional pressure and frequency. A higher mechanical index indicates greater potential for mechanical bioeffects.

  187. Question 187Quality Assurance, Safety and Artifacts

    Which on-screen index estimates temperature rise in soft tissue when no bone is in the beam path?

    1. TIS Correct answer.
    2. TIC
    3. TIB
    4. MI

    Explanation

    TIS estimates temperature rise in soft tissue when bone is not in the beam path. TIB applies when bone is at or near the focus, and TIC applies to transcranial examinations.

  188. Question 188Quality Assurance, Safety and Artifacts

    A fluid-filled cyst appears brighter deep to its posterior wall. This is:

    1. mirror-image artifact
    2. comet-tail reverberation
    3. posterior acoustic shadowing
    4. acoustic enhancement Correct answer.

    Explanation

    Fluid attenuates sound less than surrounding tissue, so echoes returning from deep to a cyst are stronger, producing acoustic enhancement. It is a normal propagation artifact.

  189. Question 189Quality Assurance, Safety and Artifacts

    What is the minimum processing level for a transducer used in endocavitary examinations?

    1. Soap and water washing only
    2. Sterilization by autoclave
    3. Low-level disinfection
    4. High-level disinfection Correct answer.

    Explanation

    Endocavitary transducers contact mucous membranes and are semi-critical devices, requiring at least high-level disinfection between patients. Low-level disinfection or washing alone is insufficient, and autoclaving would destroy the probe.

  190. Question 190Quality Assurance, Safety and Artifacts

    Which thermal index is displayed when the beam passes through bone at the soft-tissue–bone interface?

    1. TIC
    2. MI
    3. TIS
    4. TIB Correct answer.

    Explanation

    When the beam intersects bone at a soft-tissue–bone interface, the system displays TIB because bone absorbs more and heats preferentially. TIS is used when no bone is in the path, and TIC for transcranial scanning.

  191. Question 191Quality Assurance, Safety and Artifacts

    What is the FDA upper limit for the displayed mechanical index in general diagnostic imaging?

    1. 1.9 Correct answer.
    2. 6.0
    3. 0.23
    4. 1.0

    Explanation

    The FDA sets an upper limit of 1.9 for the mechanical index in general diagnostic ultrasound, with a lower limit for ophthalmic examinations. Values above this require specific justification.

  192. Question 192Quality Assurance, Safety and Artifacts

    Why is a low mechanical index used during contrast-enhanced ultrasound?

    1. To improve color Doppler sensitivity
    2. To preserve the microbubbles Correct answer.
    3. To reduce the thermal index to zero
    4. To increase the displayed frame rate

    Explanation

    Microbubbles are fragile; a low mechanical index reduces acoustic pressure so the contrast agent survives longer and its nonlinear signals can be detected. High mechanical index values are used deliberately to destroy bubbles for flash-replenishment imaging.

  193. Question 193Quality Assurance, Safety and Artifacts

    Echoes from a strong reflector appear inside a fluid-filled structure located off the beam's main axis. This is caused by:

    1. range ambiguity
    2. reverberation
    3. side lobes Correct answer.
    4. refraction

    Explanation

    Side lobes are off-axis beams emitted by the transducer that can generate echoes from strong reflectors outside the main beam, placing them incorrectly within a fluid structure. Grating lobes are a related but distinct off-axis effect.

  194. Question 194Quality Assurance, Safety and Artifacts

    A strong reflector appears at an incorrect shallower depth because echoes from a previous pulse arrive during the current listening period. This is:

    1. shadowing
    2. range ambiguity Correct answer.
    3. mirror image
    4. comet tail

    Explanation

    Range ambiguity occurs when echoes from a previous pulse return after the next pulse is emitted, so the system assigns them an incorrect shallower depth. It is more likely with a high pulse repetition frequency or very deep reflectors.

  195. Question 195Quality Assurance, Safety and Artifacts

    Which phantom test evaluates elevational (slice-thickness) resolution?

    1. A thin fluid-filled sheet target Correct answer.
    2. A moving string target
    3. A calibrated power meter
    4. A low-contrast gray-scale phantom

    Explanation

    Elevational resolution is assessed with a thin fluid-filled sheet or channel target; the thinnest sheet still resolved indicates slice thickness. A moving string tests velocity accuracy, a low-contrast phantom tests contrast resolution, and a power meter measures acoustic output.

  196. Question 196Quality Assurance, Safety and Artifacts

    Which electrical safety measurement assesses current that could flow through a patient from the transducer?

    1. Patient leakage current Correct answer.
    2. Mechanical index
    3. Measured acoustic output power
    4. Doppler shift

    Explanation

    Patient leakage current is the current that could flow through the patient via the transducer or patient connections, and it is checked during electrical safety testing. Acoustic output, mechanical index, and Doppler shift are not electrical safety measurements.

  197. Question 197Quality Assurance, Safety and Artifacts

    When should acceptance testing of a new ultrasound system be performed?

    1. Before its first clinical use Correct answer.
    2. Only after a transducer is replaced
    3. After the first year of service
    4. Whenever the image appears degraded

    Explanation

    Acceptance testing establishes baseline performance before a new system or transducer is used clinically, so later changes can be detected. It is not delayed one year or performed only after failures.

  198. Question 198Quality Assurance, Safety and Artifacts

    A structure above a strong curved reflector appears duplicated deeper on the image. This is:

    1. off-axis side lobe artifact
    2. posterior acoustic shadowing
    3. range ambiguity artifact
    4. mirror-image artifact Correct answer.

    Explanation

    A strong, smooth reflector can act like a mirror, producing a duplicate of a structure at a greater depth; the artifact is called mirror image. It differs from shadowing, side lobe artifacts, and range ambiguity.

  199. Question 199Quality Assurance, Safety and Artifacts

    Echoes from a bright structure adjacent to a cyst appear within the cyst because the beam is wide in the elevational plane. This is:

    1. posterior acoustic enhancement
    2. posterior acoustic shadowing
    3. slice-thickness artifact Correct answer.
    4. comet-tail reverberation artifact

    Explanation

    Slice-thickness artifact occurs because the beam has finite width in the elevational plane, so bright echoes adjacent to a cyst can be included within the cyst's display. It is not enhancement, comet tail, or shadowing.

  200. Question 200Quality Assurance, Safety and Artifacts

    Which factor most directly determines the displayed thermal index?

    1. The displayed depth and the color Doppler scale
    2. The square of the displayed mechanical index
    3. Attenuated acoustic power at the tissue depth Correct answer.
    4. The transducer center frequency and the frame rate

    Explanation

    Thermal index is the ratio of estimated attenuated acoustic power to the power needed to raise tissue temperature by 1°C, so attenuated power at the tissue level is the key determinant. Frequency, depth, and frame rate influence output but do not directly define the thermal index.

SPI flashcards

32 cards. Read the term and the definition here. The deck at the top of this page is optional.

Soft tissue propagation speed
Ultrasound travels through average soft tissue at approximately 1540 meters per second, or 1.54 millimeters per microsecond. This assumed constant underlies all depth and distance calculations.
Wavelength equation
Wavelength equals propagation speed divided by frequency. In soft tissue, wavelength in millimeters equals 1.54 divided by frequency in megahertz, so higher frequency gives a shorter wavelength.
Acoustic impedance
Impedance is tissue density multiplied by propagation speed, expressed in rayleighs. A large impedance mismatch at an interface causes strong reflection and little transmission.
Axial resolution equation
Axial resolution equals spatial pulse length divided by two, or wavelength times cycles per pulse divided by two. Shorter pulses and higher frequencies improve axial resolution.
Piezoelectric effect
Certain crystals such as lead zirconate titanate convert applied voltage into mechanical vibration and convert returning vibration back into voltage, letting one element both transmit and receive.
Curie temperature
The temperature above which a piezoelectric crystal loses its polarization and stops producing ultrasound. Heating a transducer above this point permanently reduces its efficiency.
Matching layer thickness
A layer one-quarter wavelength thick placed at the transducer face. It provides intermediate impedance between crystal and skin, reducing reflection and increasing transmitted intensity.
Backing (damping) material
Material behind the crystal that absorbs rearward sound and stops crystal ringing. It shortens the pulse, broadens bandwidth, and improves axial resolution at the cost of sensitivity.
Frame rate equation
Frame rate equals pulse repetition frequency divided by the number of pulses per frame. Deeper imaging, wider sectors, and higher line density all lower the frame rate.
Harmonic imaging
The transducer transmits at the fundamental frequency and receives echoes at twice that frequency. Harmonics arise within tissue and improve lateral resolution while reducing side-lobe clutter.
Doppler shift equation
The Doppler shift equals twice the transmitted frequency times flow velocity times the cosine of the angle, divided by propagation speed. The shift is maximal at zero degrees.
Nyquist limit
The highest Doppler shift that can be displayed without aliasing, equal to half the pulse repetition frequency. Shifts above this value wrap to the opposite side of the display.
Doppler aliasing
A wraparound error on spectral or color Doppler occurring when the Doppler shift exceeds the Nyquist limit, so peak velocities appear on the opposite channel or as a color reversal.
Continuous wave Doppler
Two separate crystals transmit and receive continuously, so there is no pulse and no aliasing. It detects the highest velocities but has no depth discrimination along the beam.
Resistive index
Peak systolic velocity minus end-diastolic velocity, divided by peak systolic velocity. Values near zero indicate low-resistance flow; values approaching one indicate high-resistance flow.
Bernoulli equation
The pressure gradient across a stenosis is approximately four times the square of the peak velocity in meters per second, allowing severity to be estimated from a Doppler measurement.
Continuity equation
Volume flow equals cross-sectional area multiplied by velocity. Because flow is constant along a vessel, velocity increases wherever the cross-sectional area narrows.
Power Doppler
Displays the amplitude of the Doppler signal rather than its frequency shift. It is angle independent, does not alias, and detects slow flow, but shows no direction or velocity.
Wall filter
A high-pass filter that removes strong, low-frequency Doppler signals originating from moving vessel walls and cardiac motion. Excessive filtering can eliminate genuine slow-flow signals.
Tissue-mimicking phantom
A test object with known attenuation, propagation speed, and target positions, used to measure resolution, distance accuracy, and sensitivity. Its cyst-like and solid targets simulate tissue contrast.
Dead zone
The near-field distance from the transducer face to the first resolvable echo. It reflects ring-down and pulse duration, and a long dead zone hides shallow structures.
Distance accuracy tolerance
Measured distances on a phantom should agree with true values within about two percent or two millimeters, whichever is greater, confirming correct depth calibration of the system.
Uniformity test
Evaluates whether echo brightness is consistent across the whole image at a fixed depth. Bright or dark vertical bands reveal time-gain compensation errors or failed transducer elements.
Anechoic cyst contrast test
Measures the ability to detect and display a fluid-filled target against background tissue. Loss of contrast resolution appears as fill-in of the cyst interior.
Transducer element dropout
Failure of individual transducer elements produces vertical bands of missing or reduced echoes in the image, most easily detected with a uniformity phantom.
Thermal index
An estimate of temperature rise from absorbed ultrasound, calculated as output power divided by the power needed to raise tissue one degree Celsius. Subscripts denote soft tissue, bone, or cranial.
Mechanical index
Peak rarefactional pressure in megapascals divided by the square root of frequency in megahertz. Higher values increase the likelihood of cavitation, especially when gas bodies are present.
Inertial cavitation
Bubble collapse during the compression phase of an ultrasound wave, producing high local temperatures and shock waves. The threshold falls sharply when contrast microbubbles are present.
Reverberation artifact
Equally spaced false echoes produced when sound bounces repeatedly between two strong reflectors, such as the transducer face and a needle or a layer of fat.
Acoustic shadowing
Reduced echoes deep to a highly attenuating or strongly reflecting structure such as bone, calculus, or gas, appearing as a dark band below the object.
Mirror image artifact
A duplicate of a structure appearing beyond a strong specular reflector, such as the diaphragm, because the reflector acts as a mirror and the extra path length is not recognized.
ALARA principle
As low as reasonably achievable: ultrasound exposure is kept to the minimum that yields diagnostic information, using the lowest acceptable output and the shortest scanning time.

SPI study guide

Physical Principles and Instrumentation

Wave math you must own

Diagnostic ultrasound is a mechanical, longitudinal wave. Average soft-tissue propagation speed is 1540 m/s (1.54 mm/µs). Wavelength λ = c/f and period T = 1/f: higher frequency means shorter wavelength, shorter period, and less penetration. Attenuation in soft tissue is roughly 0.5 dB/cm/MHz, so a 5 MHz beam loses about 2.5 dB per centimeter and 5 MHz reaches roughly half as deep as 2.5 MHz.

Decibels and intensity

Intensity is power per unit area (W/cm²) and is proportional to amplitude squared. A 3 dB change doubles or halves intensity (1.41× pressure); 10 dB is a tenfold intensity change; 20 dB is a tenfold amplitude change. Match the descriptor to the question: SPTA is the spatial peak, temporal average intensity used in thermal bioeffects discussions, while SPPA describes peak pressure.

Pulses and resolution

Spatial pulse length = λ × number of cycles in the pulse, and axial resolution = SPL/2. Lateral resolution is beam width, narrowest at the focal zone. Frame rate = PRF ÷ lines per frame, so depth, line density, and color box size all trade against temporal resolution. Duty factor = pulse duration × PRF.

Traps

Mixing up axial (SPL-determined) and lateral (beam-width) resolution; assuming TGC changes frequency; believing write zoom improves resolution (it enlarges stored pixels, while read zoom re-scans with finer line spacing); forgetting harmonics improve lateral resolution at the cost of penetration.

Worked example

5 MHz, 3-cycle pulse: λ = 1.54/5 = 0.308 mm; SPL = 3 × 0.308 = 0.92 mm; axial resolution = 0.46 mm.

Doppler and Hemodynamics

The Doppler equation

fd = (2 × f0 × v × cosθ) / c. The factor of 2 accounts for the round trip. Shift is greatest at 0° or 180° and vanishes at 90°, so keep the angle at or below 60°. Common calculation errors: using mean velocity when peak is requested, omitting the cosine term, or entering frequency in kHz.

Aliasing

Pulsed-wave and color Doppler alias when the shift exceeds the Nyquist limit (PRF/2). Remedies: raise PRF by imaging shallower, using fewer gates, or shrinking the color box; lower the baseline; steer toward a larger angle; transmit at a lower frequency; or switch to continuous wave. CW has no aliasing but no range resolution-it reports the highest velocity anywhere along the line.

Hemodynamics

Continuity: A1V1 = A2V2, so velocity increases through a stenosis. Poiseuille flow varies with the fourth power of radius, so small caliber changes cause large resistance changes. The simplified Bernoulli equation, ΔP = 4v², estimates the pressure drop across a narrowing. Laminar flow produces a narrow spectral band; turbulence broadens and may mirror the spectrum. A Reynolds number above roughly 2000 indicates turbulent flow. Resistive index = (PSV − EDV)/PSV; high-resistance beds such as resting limb arteries show little diastolic flow.

Traps

Confusing power Doppler (amplitude-based, no direction, no aliasing) with color velocity mapping. Remember spectral broadening also comes from a sample volume that is too large, not only from turbulence.

Worked example

3 MHz, 60°, peak velocity 100 cm/s: fd = 2 × 3,000,000 × 1.0 × 0.5 / 1540 ≈ 1950 Hz. Avoiding aliasing requires PRF above 2 × 1950 ≈ 3900 Hz.

Quality Assurance, Safety and Artifacts

Quality Assurance

Purpose and baseline

QA confirms that a system still performs as it did at acceptance and catches drift before it affects patients. Baseline values are recorded at installation and compared on a schedule (daily, monthly, annual, after transducer replacement or repair). Tests use tissue-equivalent phantoms with known 1540 m/s propagation speed and approximately 0.5 dB/cm/MHz attenuation.

Standard measurements

Axial resolution is the closest two reflectors along the beam that remain separate and is governed by spatial pulse length. Lateral resolution is the closest two side-by-side targets that remain separate and is governed by beam width. Dead zone is the nearest detectable echo, reflecting pulse length and ring-down. Maximum sensitivity (penetration) is the deepest visible echo at fixed settings. Uniformity compares brightness of identical targets at different depths and lateral positions; focal discrepancies suggest element failure or TGC malfunction. Distance accuracy compares a caliper reading with known pin spacing, typically with a tolerance of about 2% or 2 mm. Anechoic target detectability and gray-scale/dynamic-range targets assess contrast resolution.

Wider QA duties

Electrical safety testing, leakage current checks, transducer lens and cable inspection for cracks or delamination, monitor and printer calibration, and archiving of images. Accreditation programs such as ACR and AIUM require documented annual physics surveys.

Traps

Confusing distance accuracy with resolution (they are separate tests); changing machine settings between serial measurements, which invalidates comparison; scanning a phantom at an incorrect temperature, which shifts propagation speed; assuming a single passing test replaces ongoing monitoring.

Worked example

Two pins are specified 5.0 cm apart; the caliper reads 4.8 cm. Error = 0.2/5.0 = 4%, which exceeds a 2% tolerance, so the system warrants service before clinical use.

Safety and Artifacts

Output quantities

Acoustic output is described by pressure, intensity, power, and the mechanical index. SPTA intensity is the key thermal metric. Thermal index estimates temperature rise: TIS for soft tissue, TIB for bone at the focus, TIC for cranial bone. A TI of 1 approximates a 1°C elevation. Mechanical index = peak rarefactional pressure (MPa) ÷ √(f in MHz) and indexes cavitation risk. FDA limits for general use are MI ≤ 1.9, ISPTA ≤ 720 mW/cm², and TI ≤ 6, with tighter limits for ophthalmic and fetal scanning. ALARA governs every examination.

Bioeffects

Thermal effects arise from absorption and grow with exposure time, frequency, and output. Mechanical effects include stable cavitation, in which bubbles oscillate steadily, and inertial cavitation, in which bubbles collapse, producing high local pressures and free radicals. Gas bodies-lung, bowel, and especially microbubble contrast agents-lower the cavitation threshold. Spectral and color Doppler typically carry higher output than B-mode, so reduce dwell time and output when not needed.

Artifacts to recognize

Reverberation produces equally spaced echoes; comet tail and ring-down arise from two strong reflectors or resonance; mirror images appear behind a strong specular reflector such as the diaphragm; shadowing and acoustic enhancement reflect attenuation differences; refraction causes edge shadowing and duplicate images; side-lobe and grating-lobe clutter place echoes in wrong locations; slice thickness widens structures; speed error displaces structures along the beam; high-PRF range ambiguity places far echoes near the top of the image.

Worked example

Peak rarefactional pressure of 2.5 MPa at 4 MHz gives MI = 2.5/√4 = 1.25. That is below 1.9, but ALARA still requires the lowest output and shortest exposure that answer the clinical question.

SPI cheat sheet

Quick reference

Physical Principles and Instrumentation

  • Propagation speed in average soft tissue is 1540 m/s (1.54 mm/microsecond); wavelength in millimeters = 1.54 divided by frequency in MHz.

  • Attenuation averages about 0.5 dB per centimeter per megahertz, so total attenuation (dB) = 0.5 x frequency (MHz) x path length (cm).

  • Acoustic impedance = tissue density x propagation speed; intensity reflection coefficient = [(Z2 - Z1) / (Z2 + Z1)] squared.

  • Axial resolution = spatial pulse length / 2 = (wavelength x number of cycles per pulse) / 2; higher frequency and heavier damping shorten the pulse.

  • Lateral resolution is beam width, narrowest at the focal zone; it improves with higher frequency, larger aperture, and a lower f-number.

  • Elevational (slice-thickness) resolution is usually the poorest dimension and is fixed by the lens or by a 1.5-D array's elevation aperture.

  • Backing (damping) material shortens ring-down, lowers Q, and broadens bandwidth; the quarter-wave matching layer improves transmission from crystal into tissue.

  • Frame rate = pulse repetition frequency / number of pulses per frame (lines per frame); greater depth, wider sector, and higher line density each lower frame rate.

  • Receiver order is amplification, time-gain compensation, compression, demodulation, and rejection; scan conversion and postprocessing occur in the display stage.

Quick reference

Doppler and Hemodynamics

  • Doppler shift = (2 x transmitted frequency x velocity x cosine of angle) / propagation speed; the shift is maximal at 0 degrees and zero at 90 degrees.

  • Doppler angle should be kept at 60 degrees or less, because cosine changes steeply near 90 degrees and small angle errors create large velocity errors.

  • Nyquist limit = pulse repetition frequency / 2, the highest displayable shift; a shift above it aliases (wraps to the opposite channel or reverses in color).

  • Aliasing is reduced by raising PRF or scale, lowering transmitted frequency, shifting the baseline, or switching to continuous wave Doppler.

  • Continuous wave Doppler has no aliasing and no depth discrimination; pulsed Doppler provides a depth-selective sample gate but is subject to aliasing and range ambiguity.

  • Resistive index = (peak systolic - end-diastolic velocity) / peak systolic velocity; pulsatility index = (peak systolic - end-diastolic) / time-averaged mean velocity.

  • Pressure gradient across a narrowing is approximately 4 x velocity squared (Bernoulli); by continuity (A1V1 = A2V2), velocity rises where cross-sectional area falls.

  • Wall filters remove high-amplitude, low-frequency clutter from vessel wall and cardiac motion, but over-filtering erases genuine slow-flow signals.

  • Power Doppler encodes Doppler amplitude: it is angle independent, does not alias, and detects slow flow, but shows no direction or velocity; Reynolds number above about 2000 indicates turbulence.

Quick reference

Quality Assurance

  • Tissue-mimicking phantoms provide known attenuation, propagation speed, target depths, and cyst-like or solid lesions for reproducible measurements.

  • Axial resolution is the minimum separable reflector spacing along the beam; lateral resolution is measured across the beam at a stated depth.

  • Depth calibration should agree with true distance within about 2% or 2 mm, whichever is greater.

  • Dead zone is the distance from the transducer face to the first resolvable echo; a long dead zone obscures superficial structures.

  • Uniformity testing checks echo brightness across the image at fixed depth; vertical bands indicate failed elements and horizontal gradients indicate TGC errors.

  • Sensitivity (maximum penetration) is the deepest visible reflector at a given output, and anechoic cyst contrast tests contrast resolution.

  • Baseline QA is performed at installation, then on a scheduled interval such as semiannually, and always after transducer repair, drop, or replacement.

  • Transducer inspection looks for lens cracks, delamination, pitting, cable damage, and element failure, since these degrade images before electronics fail.

  • The output display standard requires real-time display of thermal and mechanical indices, supporting ALARA-based power reduction.

Quick reference

Safety and Artifacts

  • Thermal index estimates temperature rise as output power divided by the power needed to raise tissue 1 degree C; TIS is soft tissue, TIB bone at focus, TIC cranial.

  • Mechanical index = peak rarefactional pressure (MPa) / square root of frequency (MHz); values above roughly 0.5 raise cavitation concern when gas bodies exist.

  • FDA limits for general imaging: derated ISPTA at or below 720 mW/cm2 and MI at or below 1.9; ophthalmic limits are far lower (ISPTA 50 mW/cm2, MI 0.23, TI 1.0).

  • Stable cavitation is bubble oscillation; inertial cavitation is bubble collapse producing shock waves and local heating, with a lower threshold in the presence of contrast agent.

  • Reverberation produces equally spaced false echoes between two strong reflectors; comet tail and ring-down arise from fluid or gas traps.

  • Shadowing is reduced echogenicity deep to high-attenuation structures such as bone or calculi; enhancement is increased echogenicity deep to low-attenuation fluid.

  • Mirror image artifact duplicates a structure beyond a strong specular reflector (for example the diaphragm) because the extra path is not accounted for.

  • Speed-error artifact occurs when a tissue segment conducts faster or slower than the assumed 1540 m/s, displacing structures and refracting the beam.

  • Side lobes and grating lobes return echoes from off-axis reflectors that are displayed as if located along the main beam; color flash and twinkle artifacts arise from motion and rough calcific surfaces.

SPI key terms

Piezoelectric effect

The property of certain crystals and ceramics to change shape when an alternating voltage is applied, producing sound waves, and to generate a voltage when returning echoes deform them.

Related: Harmonic imaging
Acoustic impedance

The resistance of a medium to sound travel, calculated as density multiplied by propagation speed. Large differences in impedance between two tissues cause strong reflections at their boundary.

Related: Attenuation, Propagation speed
Attenuation

The loss of sound energy as a beam travels through tissue, caused by absorption, reflection, and scattering. It increases with depth and with higher transducer frequency.

Related: Time gain compensation, Acoustic shadowing, Acoustic enhancement
Propagation speed

How fast sound travels through a medium, determined by its stiffness and density. In soft tissue it averages about 1,540 meters per second, while in bone and air it differs greatly.

Related: Acoustic impedance, Attenuation
Spatial pulse length

The physical length of one pulse measured from its front to its back, equal to the number of cycles multiplied by the wavelength. Shorter pulses give better axial resolution.

Related: Axial resolution, Pulse repetition frequency
Axial resolution

The ability to show two reflectors lying along the beam path as separate echoes. It equals half the spatial pulse length and improves with higher frequency and fewer cycles per pulse.

Related: Spatial pulse length, Lateral resolution
Lateral resolution

The ability to distinguish two reflectors lying side by side, perpendicular to the beam. It is best at the focal zone and worsens with greater depth or a wider beam.

Related: Focal zone, Axial resolution
Focal zone

The region of the sound beam where it is narrowest and image detail is sharpest. Its position and length are set by the element's curvature or by electronic focusing.

Related: Lateral resolution, Frame rate
Pulse repetition frequency

The number of ultrasound pulses emitted per second. Higher values allow faster frame rates but reduce the maximum depth that can be imaged before range ambiguity occurs.

Related: Frame rate, Nyquist limit, Aliasing
Duty factor

The fraction of time the transducer is actively transmitting compared with the total pulse repetition period. Continuous-wave Doppler has a duty factor of 1.0; imaging modes are far lower.

Related: Pulse repetition frequency, Continuous-wave Doppler
Dynamic range

The ratio, usually stated in decibels, between the strongest and weakest signals a system can handle or display. Choosing it appropriately affects image contrast and displayed echo brightness.

Related: Bit depth, Time gain compensation
Time gain compensation

A control that increases amplification of echoes returning from greater depths to offset attenuation, so that similar reflectors appear with similar brightness across the image.

Related: Attenuation, Dynamic range
Frame rate

The number of complete images produced per second. It falls when imaging depth, line density, or the number of focal zones is increased.

Related: Pulse repetition frequency, Focal zone
Harmonic imaging

A technique that listens for echoes at twice the transmitted frequency, generated as sound travels through tissue. It improves contrast and reduces haze without the need for contrast agents.

Related: Attenuation
Bit depth

The number of binary bits used to store each echo sample's amplitude, which determines how many shades of gray the displayed image can potentially show.

Related: Dynamic range
Doppler shift

The change in frequency between transmitted sound and echoes returning from moving red blood cells. The shift is proportional to blood velocity and to the cosine of the Doppler angle.

Related: Doppler angle, Continuous-wave Doppler
Doppler angle

The angle between the ultrasound beam and the direction of blood flow. Shifts are converted to accurate velocities only when this angle is 60 degrees or less.

Related: Doppler shift, Color Doppler
Continuous-wave Doppler

A mode using separate elements to transmit and receive without pausing, so it detects flow at any depth along the beam but cannot localize where that flow occurs.

Related: Pulsed-wave Doppler, Duty factor
Pulsed-wave Doppler

A mode that transmits short pulses and listens only during a chosen time window, allowing flow velocity to be measured at a specific depth selected by the operator.

Related: Sample volume, Nyquist limit, Aliasing
Nyquist limit

The highest Doppler shift that can be displayed without ambiguity, equal to half the pulse repetition frequency. Shifts above it appear on the wrong side of the baseline.

Related: Aliasing, Pulse repetition frequency
Aliasing

The wrap-around of a Doppler waveform or color map when the shift exceeds the Nyquist limit, showing peak velocities on the opposite side of the baseline or as a color reversal.

Related: Nyquist limit, Color Doppler
Wall filter

A high-pass filter that removes strong, low-frequency Doppler shifts coming from slow-moving vessel walls and surrounding tissue so that blood flow signals stand out more clearly.

Related: Color Doppler, Power Doppler
Color Doppler

A mode that displays mean flow velocity across a region of interest as a color map, typically red toward and blue away from the transducer, with brightness indicating speed.

Related: Aliasing, Wall filter, Power Doppler
Power Doppler

A mode that displays the strength of Doppler signals rather than their frequency shift, making it more sensitive to slow flow but unable to show direction or velocity.

Related: Color Doppler, Wall filter
Sample volume

The small gate in pulsed-wave Doppler, positioned along the beam, from which returning echoes are accepted. Its length sets the depth range over which flow is measured.

Related: Pulsed-wave Doppler, Doppler angle
Tissue-equivalent phantom

A test object made of material that mimics soft tissue attenuation and speed, containing targets of known position and size, used to check system performance over time.

Related: Uniformity, Vertical distance accuracy, Sensitivity
Sensitivity

A system's ability to detect weak echoes from deep structures. It is tested by finding the greatest depth at which echoes remain visible at a fixed output setting.

Related: Tissue-equivalent phantom, Dead zone
Dead zone

The region immediately in front of the transducer where echoes cannot be resolved because the pulse has not yet ended, so very superficial structures may be missed.

Related: Axial resolution, Sensitivity
Uniformity

The evenness of brightness across an image made while scanning a uniform test object. Uneven areas point to element failures, focusing problems, or gain errors.

Related: Tissue-equivalent phantom, Sensitivity
Vertical distance accuracy

How closely a depth measured on the display matches the true depth of a target, checked using phantom pins placed at known separations.

Related: Tissue-equivalent phantom
Preventive maintenance

Scheduled inspection, cleaning, and testing of scanners and transducers to catch problems early and keep image quality and safety within accepted limits.

Related: Tissue-equivalent phantom, Sensitivity
ALARA

As Low As Reasonably Achievable: the principle of using the lowest acoustic output and the shortest exposure time that still yields a diagnostic result, limiting patient exposure.

Related: Thermal index, Mechanical index
Thermal index

An estimate of the temperature rise tissue may experience from absorbed sound, calculated as acoustic output power divided by the power needed to raise tissue temperature by one degree Celsius.

Related: ALARA, SPTA intensity
Mechanical index

An indicator of the likelihood of cavitation, calculated as the peak negative pressure in megapascals divided by the square root of the frequency in megahertz.

Related: Cavitation, ALARA
Cavitation

The formation, oscillation, or collapse of gas bubbles in tissue or contrast agents when exposed to sound, which can damage nearby cells at high intensities.

Related: Mechanical index
SPTA intensity

Spatial peak temporal average intensity: the highest intensity within the beam averaged over time. It is the value most closely linked to thermal bioeffects.

Related: Thermal index, ALARA
Reverberation artifact

Multiple false echoes appearing behind a strong reflector at evenly spaced depths, caused by sound bouncing back and forth between the reflector and the transducer.

Related: Mirror image artifact, Acoustic shadowing
Acoustic shadowing

A darker region behind a structure that reflects or absorbs most of the sound, such as bone or a gallstone, because little energy reaches the tissue beyond it.

Related: Acoustic enhancement, Attenuation
Acoustic enhancement

Increased brightness behind a fluid-filled structure that weakens sound less than the surrounding tissue, so tissues deeper than the fluid return stronger echoes.

Related: Acoustic shadowing, Attenuation
Mirror image artifact

A duplicate of a real structure appearing on the far side of a strong reflector, created when sound bounces off the reflector before reaching the true object.

Related: Reverberation artifact

SPI study plan

8 weeks · About 7 hours per week

Week 1

Physical Principles and Instrumentation

  • Define and distinguish the wave parameters (frequency, period, wavelength, amplitude, power, intensity, speed) and state how each changes when the sound travels from one medium to another

  • Compute propagation speed, wavelength, and period from given values without a calculator shortcut sheet

  • Apply the decibel system to express intensity and amplitude ratios and to solve attenuation-in-dB problems using the 0.5 dB/cm/MHz rule

  • Explain acoustic impedance and predict the relative size of a reflection at soft-tissue, bone, and air interfaces

  • Describe reflection, refraction, scattering, and absorption, and rank tissues by attenuation

Your checkpoint

A one-page handwritten formula sheet (speed, wavelength, dB, attenuation, impedance, half-value layer) self-tested by reciting it from memory with no errors

Week 2

Physical Principles and Instrumentation

  • Compare continuous wave and pulsed wave transducers by duty factor, bandwidth, Q factor, and the effect on axial resolution

  • Explain piezoelectric effect, element material properties, and the function of matching layer, backing material, and acoustic lens

  • Differentiate axial, lateral, elevational, and temporal resolution and state the instrument determinant of each

  • Describe beam formation, focal zone, near/far field (Fresnel/Fraunhofer), and how aperture, frequency, and focusing alter beam width

  • Sequence the signal path through the beam former, receiver, amplifier, demodulator, and scan converter, and classify each control as pre- or post-processing

Your checkpoint

A labeled hand-drawn diagram of the pulse-echo signal path with each resolution type and its determinant annotated, checked against a written accuracy list

Week 3

Physical Principles and Instrumentation & Doppler and Hemodynamics

  • Explain image formation for each display mode (A, B, M, 2D) and describe how frame rate, line density, depth, and field of view trade off against temporal resolution

  • Calculate frame rate, PRF, PRP, and duty factor from given depth and line-count values

  • State the Doppler equation and identify which variables the technologist can and cannot control

  • Contrast continuous wave and pulsed wave Doppler by range resolution, maximum velocity detectable, and typical clinical use

  • Interpret the spectral waveform display: baseline, scale, direction, window, and the meaning of spectral broadening

Your checkpoint

A 20-question self-written quiz on frame rate/PRF calculations and Doppler equation variables, scored at 85% or better on a closed-book retake

Week 4

Doppler and Hemodynamics

  • Predict and explain aliasing from PRF, Nyquist limit, frequency, depth, and angle, and list at least five corrective actions in order of preference

  • Describe color Doppler and color power Doppler by principle, advantages, limitations, and frame-rate cost

  • Apply the Doppler angle correction rule and evaluate the error introduced at 60 degrees versus steeper angles

  • Relate pressure gradient, Bernoulli equation, continuity equation, and resistance to spectral waveform shape and pulsatility

  • Distinguish high-resistance from low-resistance waveforms and identify normal versus abnormal spectral findings at common vascular and cardiac sites

Your checkpoint

A written table of 10 clinical scenarios listing the suspected Doppler problem (aliasing, angle error, wall filter, gain too high, etc.), the corrective control, and the expected effect on the waveform

Week 5

Quality Assurance, Safety and Artifacts

  • Explain the mechanisms of bioeffects (thermal and mechanical/cavitation) and the conditions that favor each

  • Interpret thermal index and mechanical index values and apply the ALARA principle to adjust output, dwell time, and mode

  • Recall the key regulatory and advisory output limits (TI, MI, intensity, and the 8-hour exposure concept) and identify which are not under operator control

  • List and explain the components of a routine quality assurance program including phantom tests, uniformity, and dead-zone checks

  • Identify the causes and correct display of the major artifacts: reverberation, comet tail, shadowing, enhancement, mirror image, speed error, and slice-thickness

Your checkpoint

A two-column artifact-and-safety study card set (minimum 15 entries) matching each artifact or bioeffect term to its cause and its fix, verified by a peer or answer key

Week 6

Quality Assurance, Safety and Artifacts & Doppler and Hemodynamics

  • Design a monthly QA schedule that specifies which parameter is measured, with what device, and against what acceptance threshold

  • Explain receiver/display test metrics: sensitivity, uniformity, axial and lateral resolution, max depth, and vertical/horizontal distance accuracy

  • Diagnose system faults from image appearance (dropout, banding, dead elements, electrical interference) and state the escalation step

  • Re-derive Doppler correction actions and safety trade-offs for high-output modes such as spectral Doppler and color Doppler

  • Combine safety, artifact recognition, and Doppler settings into a single troubleshooting decision sequence

Your checkpoint

A completed mock QA log covering 10 simulated image defects, each with a probable cause, a verification test, and a pass/fail threshold

Week 7

Physical Principles and Instrumentation & Doppler and Hemodynamics & Quality Assurance, Safety and Artifacts

  • Rank your weakest five subtopics from prior weeks' scores and rebuild each from first principles

  • Solve mixed calculation sets spanning attenuation, frame rate, Nyquist, PRF, and resolution under a 1-minute-per-question limit

  • Write and answer 30 original questions that combine two domains (for example, an artifact question that depends on transducer physics)

  • Re-teach the highest-yield concepts aloud from memory and correct any self-identified gaps

  • Rehearse instrument control adjustments by predicting the effect of each knob on image and Doppler display

Your checkpoint

A written error log of at least 25 missed items with the corrected reasoning and the underlying principle, reviewed to zero remaining open entries

Week 8

Physical Principles and Instrumentation & Doppler and Hemodynamics & Quality Assurance, Safety and Artifacts

  • Complete three timed full-length practice exams under test-day conditions and score each immediately

  • Recompute every missed calculation and classify each remaining error as knowledge, calculation, or misread

  • Recite the full formula sheet plus the safety limit values from memory with no errors

  • Review only high-yield summaries and the week-7 error log for the final two days; avoid new material

  • Confirm test-day logistics, timing strategy, and a plan for flagging and returning to uncertain items

Your checkpoint

Three scored practice exams with a final error analysis showing at least 85% on the last attempt and no unresolved calculation errors

Milestones

Week 2: Recite the complete formula sheet from memory and score 90% or better on a self-made 25-question Domain 1 physics quiz without notes

Week 4: Score 80% or better on a closed-book Domain 2 Doppler and hemodynamics quiz, including at least five aliasing and angle-correction scenarios

Week 6: Score 80% or better on a combined Domain 3 safety, artifact, and QA quiz and produce a complete, correctly thresholded QA log

Week 7: Error log has no open entries and mixed-domain timed calculation sets average 80% or better

Week 8: Third timed full-length practice exam scores 85% or better with balanced performance across all three domains

SPI exam day

Your checklist

Government-issued photo ID

Bring a current, unexpired photo ID. The name on the ID should match your registration record exactly; if your name has changed, confirm with the provider (ARDMS/Pearson VUE) how to handle it before test day. Confirm which ID forms are accepted at your specific testing center.

Appointment confirmation details

Have your appointment confirmation number, test date/time, and testing-center address available (digital or printed). Confirm in advance whether your center requires a printed copy.

Verified testing-center location and route

Look up the exact address, parking situation, and transit options a few days ahead. Do a dry run if the center is unfamiliar, and plan a buffer for traffic and security check-in.

Arrival time plan

Plan to arrive well before your scheduled start time. Seating is usually first-come within your appointment slot, and check-in (ID check, photo, security screening, locker assignment) takes time. Confirm the recommended arrival window with the provider.

Approved accommodations documentation (if applicable)

If you requested testing accommodations, confirm approval ahead of time and check with the provider whether you need to bring any approval documentation or reference number on test day.

Personal items plan

Most centers do not allow phones, watches, notes, or study materials in the testing room; small lockers are typically provided. Confirm your center's rules and leave unnecessary valuables at home or in the car.

Calculator / scratch material expectations

The SPI includes some instrumentation calculations, so clarify ahead of time whether an on-screen calculator, physical calculator, or erasable note board is provided and what is prohibited. Do not bring your own calculator unless the provider confirms it is allowed.

Medications, glasses, and comfort items

Bring glasses/contact lens supplies and any medication you may need during the appointment. Tell the proctor about items you need to keep with you; some items may require inspection or approval.

Light one-page formula/concept review sheet

Use it only in the final days of study, never at the center. Focus on the relationships you are most likely to need (e.g., how frequency, period, wavelength, propagation speed, and attenuation relate; decibel and intensity relationships; axial and lateral resolution drivers).

Sleep, food, and hydration plan

Protect sleep in the 48 hours before the exam, eat a normal meal beforehand, and moderate caffeine so you are alert but not jittery during a long multiple-choice session.

Time-management plan

Know roughly how many questions and how much time you will have (confirm the exact format and time limit with the provider, as these details can change) and decide in advance how you will pace yourself and use flags.

Post-exam plan

Decide how you will receive results and what you will do if you need to retest. Confirm score-report timing, retake windows, and any waiting period with the provider rather than assuming.

Plan the day

Final 72 hours

Verify your appointment date, time, and location; confirm ID name match and any accommodation approvals. Switch from new material to consolidation: review your own summary sheet, redo missed practice questions, and stop studying new topics. Keep sleep and meal times steady.

Final 24 hours

Pack your ID and confirmation details, confirm the route and parking, set two alarms, and lay out clothes. Do a short, low-stress review of key relationships and image-formation concepts, then stop. Avoid cramming new material or a late night.

Morning of the exam

Eat a normal meal, hydrate moderately, and leave with a generous buffer. Arrive early for check-in and security screening. Avoid last-minute studying in the parking lot, which tends to raise anxiety more than it helps. Use the restroom before you are seated.

During the test

Read each question completely, including qualifiers such as 'most likely' or 'except.' For calculation items, write down knowns, check units, and sanity-check the magnitude of your answer. Answer easier items first, flag and return to harder ones, and keep an eye on the clock so you are not rushed at the end. If the format allows, ensure every question is answered before time expires.

Rules to check

  • Bring valid government-issued photo ID; the name must match your registration. If it does not match, contact the provider before test day-do not expect the center to resolve it for you.

  • Arrive at or before your scheduled time. Late arrival can result in denial of entry and loss of your exam fee; confirm the exact late-arrival policy with the provider.

  • Expect a closed-book exam. Phones, watches, notes, and study materials are not permitted in the testing room; personal items are typically stored in a provided locker.

  • Breaks are usually available, but the clock generally does not stop during unscheduled breaks. Confirm break rules for your specific appointment and plan hydration accordingly.

  • Scores are reported as pass/fail based on a scaled score with a passing standard set by the credentialing body, not a simple percentage of correct answers. Confirm the current scoring and reporting details with the provider.

  • You will likely be asked to accept a confidentiality or non-disclosure agreement covering exam content. Do not reproduce, discuss, or share specific exam questions afterward.

  • Accommodations and rescheduling generally must be arranged in advance through the provider and may involve fees or time windows. Confirm deadlines and costs before making any changes.

  • If you are unsure whether something is permitted-calculator, notes, extra ID, medical items-ask the provider before test day rather than assuming the proctor will allow it.

SPI FAQ

How many SPI practice questions are available?

The practice set has 200 SPI questions. Each one includes the choices, the correct answer, and an explanation, and the set is free to read with no signup.

How many SPI flashcards are available?

The flashcard set has 32 SPI cards. Each card shows the term and its definition.

Which topics does the SPI study material cover?

The SPI study material covers Physical Principles and Instrumentation, Doppler and Hemodynamics, and Quality Assurance, Safety and Artifacts.