PiCAT overview

  • 199 practice questions
  • 32 flashcards
  • 10 study guide topics
  • 39 key terms

What you'll study

  • General Science10%
  • Arithmetic Reasoning10%
  • Word Knowledge10%
  • Paragraph Comprehension10%
  • Mathematics Knowledge10%
  • Electronics Information10%
  • Auto Information10%
  • Shop Information10%
  • Mechanical Comprehension10%
  • Assembling Objects10%

PiCAT stands for Pending Internet Computerized Adaptive Test - the unproctored version of the CAT-ASVAB. Because it can be taken from anywhere with an internet connection, it can be a practical alternative for applicants who live far from a MEPS or MET site. Unlike the ASVAB, it does not need to be taken at a MEPS or MET site, and there are no time limits for the individual subtests. The content parallels the ASVAB's subject areas: general science, arithmetic reasoning, word knowledge, paragraph comprehension, mathematics knowledge, electronics information, auto information, shop information, mechanical comprehension, and assembling objects. Once an applicant's PiCAT score is verified, it becomes the ASVAB score of record. You must get an access code from a military recruiter; the code expires 30 days after it is issued, and a test you have started must be completed within 48 hours. Most applicants should plan on 2 to 3 hours. Prepare by practicing each subject area, then rehearse working straight through without interruptions, since the proctored verification test is designed to check that your performance is consistent.

Common mistakes

Setting up a rate or proportion correctly but plugging in numbers without converting units first - e.g., computing earnings per hour and then multiplying by a time given in minutes, or adding a distance in feet to one in miles.

Under time pressure the numbers get grabbed in the order they appear in the prompt, and the unit labels get skimmed past because they aren't part of the arithmetic.

What to do instead

Write the unit next to every number before computing, and carry units through the multiplication so they cancel. If the leftover unit isn't the one the question asks for, convert before dividing.

Distributing a negative sign across a parenthetical incorrectly, e.g., rewriting -(x - 3) as -x - 3, and then solving the rest of the equation correctly from a wrong first line.

The minus sign in front of parentheses is visually small and gets processed as 'subtract the first term only'; the rest of the problem then feels routine, so no alarm goes off.

What to do instead

Rewrite every subtraction as 'plus the negative' before distributing, then check by substituting a simple number such as x = 2 into both the original and the rewritten expression.

Picking an answer choice that shares a root or a general theme with the target word (e.g., choosing 'lively' for 'vivacious' when the stem needs 'animated' in a specific sense) rather than the choice that fits the same part of speech and register.

Words that look or sound related feel familiar, and familiarity gets misread as correctness when the candidate is choosing quickly.

What to do instead

Cover the choices, write your own synonym first, then match. For each finalist, say the word aloud in a short sentence and check that its part of speech and tone fit.

Answering an inference or 'the author would most likely agree' question from personal opinion or outside knowledge instead of from what the passage actually supports.

The topic is often familiar, so the brain supplies an answer from memory and the passage is only skimmed for confirmation.

What to do instead

Before looking at the choices, locate and underline the one or two sentences that license the answer. If no sentence supports it, the choice is wrong no matter how true it is in real life.

Treating parallel resistors or parallel branches like series ones - adding resistances straight across, or assuming current is the same through parallel branches instead of voltage being the same.

The series formulas are learned first and repeated more, so they surface automatically even when the diagram shows branches.

What to do instead

Identify series versus parallel before touching numbers: for parallel resistance use the reciprocal sum, and sanity-check that the total is smaller than the smallest individual resistor.

Blaming the battery for a no-crank condition without checking the rest of the starting circuit, and skipping the simple test of whether the lights work and whether there is a click.

The battery is the most familiar component, so it becomes the default suspect, and the symptom description gets read as a conclusion rather than as evidence.

What to do instead

Trace the energy path in order - battery terminals and grounds, then cables, then solenoid/starter - and use each symptom as a test result that eliminates or confirms one link at a time.

Selecting a saw or fastener by general appearance rather than by the specific job - reaching for a ripsaw on a crosscut, or driving a screw where a nail is called for.

The tools sit side by side in memory and the tooth count or thread type is a detail that was never tied to a function.

What to do instead

Learn each tool paired with its job and one distinguishing feature: coarse teeth and long cuts for ripping along the grain, fine teeth for crosscuts, threads for holding in material you may need to remove later.

Assuming the larger gear, pulley, or piston turns or moves faster, when the larger one actually turns more slowly while delivering more force.

Bigger intuitively reads as 'more' and 'faster', and the trade-off between speed and force isn't linked to the visual.

What to do instead

For any machine, state what is constant (teeth engaged, belt speed, work in equals work out) and derive speed and force from that. Bigger driven gear means slower output and greater torque.

Trying to mentally rotate the entire assembled object at once, getting lost halfway, and then guessing based on which shape looks most similar overall.

Holding a full 3D object in working memory is beyond what most people can do accurately in a few seconds, so the attempt collapses and gets replaced with a guess.

What to do instead

Ignore the global shape. Match one distinctive connection point at a time - joint type, tab and slot shape, the angle where two pieces meet - and eliminate any choice that contradicts even a single connection.

Replacing a stated scientific fact with everyday intuition, such as assuming heavier objects fall faster in a vacuum, that heat and temperature are the same quantity, or that sound travels better through a gas than a solid.

Everyday experience is vivid and automatic, and it fills the gap before a recalled principle can be retrieved.

What to do instead

For each missed item, write one sentence naming the principle that governs it and one counterintuitive consequence of that principle; review those paired statements rather than rereading the definition.

Exam requirements can change. Confirm current details with the exam provider.

PiCAT practice

199 questions. Each one lists the choices, the correct answer, and an explanation. With JavaScript, this list opens one question at a time. The checker at the top of this page saves progress in this browser when it is available.

  1. Question 1General Science

    Which cell organelle is the main site of ATP production in a eukaryotic cell?

    1. Ribosome
    2. Golgi apparatus
    3. Mitochondrion Correct answer.
    4. Nucleus

    Explanation

    Mitochondria carry out cellular respiration, using oxygen and glucose to generate most of the cell's ATP. Ribosomes build proteins, the nucleus stores genetic material, and the Golgi apparatus packages and ships proteins.

  2. Question 2General Science

    What is the chemical symbol for potassium?

    1. P
    2. Po
    3. Pt
    4. K Correct answer.

    Explanation

    Potassium's symbol comes from its Latin name, kalium. Symbols are not always the first letters of the English name, so the Latin root must be recognized.

  3. Question 3General Science

    Which unit is used to measure force in the International System of Units?

    1. Joule
    2. Newton Correct answer.
    3. Watt
    4. Pascal

    Explanation

    The newton is the SI unit of force, defined as the force that accelerates one kilogram at one meter per second squared. The other units measure energy, power, and pressure respectively.

  4. Question 4General Science

    In which layer of Earth's atmosphere does nearly all weather occur?

    1. Thermosphere
    2. Stratosphere
    3. Mesosphere
    4. Troposphere Correct answer.

    Explanation

    The troposphere is the lowest atmospheric layer and contains most of the atmosphere's water vapor, so clouds, storms, and precipitation form there. Temperature generally decreases with altitude in this layer.

  5. Question 5General Science

    Which structure is the largest organ of the human body?

    1. Lungs
    2. Skin Correct answer.
    3. Liver
    4. Brain

    Explanation

    The skin is the body's largest organ by both surface area and weight, forming the protective outer covering. It also helps regulate temperature and sensation.

  6. Question 6General Science

    Which planet in our solar system is the largest?

    1. Jupiter Correct answer.
    2. Neptune
    3. Saturn
    4. Earth

    Explanation

    Jupiter is the largest planet, with a mass greater than all the other planets combined. Saturn is second, while Earth and Neptune are much smaller.

  7. Question 7General Science

    A solution with a pH of 3 is best described as which of the following?

    1. Strongly basic
    2. Acidic Correct answer.
    3. Neutral
    4. Weakly basic

    Explanation

    The pH scale runs from 0 to 14, with values below 7 acidic and values above 7 basic. A pH of 3 is well below 7, so the solution is acidic.

  8. Question 8General Science

    A net force of 20 newtons acts on a 4-kilogram object. What is the object's acceleration?

    1. 5 m/s² Correct answer.
    2. 80 m/s²
    3. 0.2 m/s²
    4. 24 m/s²

    Explanation

    Newton's second law states that acceleration equals net force divided by mass. Dividing 20 N by 4 kg gives 5 m/s².

  9. Question 9General Science

    During photosynthesis, plants take in carbon dioxide and water and release which gas as a byproduct?

    1. Oxygen Correct answer.
    2. Carbon monoxide
    3. Nitrogen
    4. Hydrogen

    Explanation

    Photosynthesis uses light energy to convert carbon dioxide and water into glucose, releasing oxygen from the splitting of water molecules. Nitrogen and hydrogen are not products of this process.

  10. Question 10General Science

    Rock that forms when molten material cools and solidifies is classified as which type?

    1. Igneous Correct answer.
    2. Sedimentary
    3. Metamorphic
    4. Mineral

    Explanation

    Igneous rock forms from the cooling and crystallization of magma or lava. Sedimentary rock forms from compacted deposits, and metamorphic rock forms when existing rock is altered by heat and pressure.

  11. Question 11General Science

    What is the approximate speed of light in a vacuum?

    1. 3 × 10^6 m/s
    2. 3 × 10^10 m/s
    3. 3 × 10^8 m/s Correct answer.
    4. 3 × 10^5 m/s

    Explanation

    Light travels at about 300,000 kilometers per second, which is 3 × 10^8 meters per second. This constant sets the upper limit for the speed of information in the universe.

  12. Question 12General Science

    The atomic number of an element is equal to the number of which particles in its atoms?

    1. Neutrons
    2. Protons Correct answer.
    3. Energy levels
    4. Electrons plus neutrons

    Explanation

    The atomic number is defined by the number of protons in the nucleus and determines the element's identity. Neutrons may vary among isotopes, and energy levels are arrangements of electrons.

  13. Question 13General Science

    Which body system transports oxygen, nutrients, and wastes throughout the body?

    1. Skeletal
    2. Circulatory Correct answer.
    3. Digestive
    4. Endocrine

    Explanation

    The circulatory system, driven by the heart, moves blood through vessels to deliver oxygen and nutrients and to carry away wastes. The other systems handle digestion, hormone signaling, and structural support.

  14. Question 14General Science

    In a food web, organisms that make their own food from sunlight are called which of the following?

    1. Predators
    2. Consumers
    3. Producers Correct answer.
    4. Decomposers

    Explanation

    Producers, such as plants and algae, convert light energy into chemical energy through photosynthesis. Consumers eat other organisms, and decomposers break down dead matter.

  15. Question 15General Science

    Heat transfer through direct contact between two objects is known as which process?

    1. Radiation
    2. Conduction Correct answer.
    3. Evaporation
    4. Convection

    Explanation

    Conduction transfers heat through direct molecular collisions within or between materials in contact. Convection moves heat with fluid currents, and radiation transfers heat through electromagnetic waves.

  16. Question 16General Science

    The change of a substance from a gas to a liquid is called which of the following?

    1. Melting
    2. Sublimation
    3. Condensation Correct answer.
    4. Evaporation

    Explanation

    Condensation occurs when a gas loses energy and its particles draw together to form a liquid. Evaporation is the reverse process, sublimation goes from solid to gas, and melting goes from solid to liquid.

  17. Question 17General Science

    Two pea plants heterozygous for flower color (Bb × Bb) are crossed, where purple (B) is dominant to white (b). What fraction of the offspring is expected to have white flowers?

    1. 3/4
    2. 1/4 Correct answer.
    3. 0
    4. 1/2

    Explanation

    A Bb × Bb cross produces genotypes in a 1 BB : 2 Bb : 1 bb ratio. Only the bb genotype shows the recessive white trait, so one quarter of the offspring are expected to be white.

  18. Question 18General Science

    A 6-ohm resistor and a 3-ohm resistor are connected in parallel. What is the equivalent resistance of the pair?

    1. 4.5 ohms
    2. 2 ohms Correct answer.
    3. 9 ohms
    4. 1.5 ohms

    Explanation

    For parallel resistors, the reciprocals add: 1/6 + 1/3 = 1/2, so the equivalent resistance is the reciprocal of 1/2, which is 2 ohms. The equivalent resistance of a parallel network is always less than the smallest individual resistance.

  19. Question 19General Science

    How many moles of water are present in 36 grams of H2O? (The molar mass of water is 18 grams per mole.)

    1. 36 mol
    2. 18 mol
    3. 2 mol Correct answer.
    4. 0.5 mol

    Explanation

    Moles equal mass divided by molar mass. Dividing 36 grams by 18 grams per mole gives 2 moles of water.

  20. Question 20General Science

    The Moon keeps the same side facing Earth at all times mainly because which of the following is true?

    1. Earth's gravity prevents the Moon from spinning
    2. The Moon's far side is permanently dark
    3. Its rotation period equals its orbital period around Earth Correct answer.
    4. The Moon does not rotate on its axis

    Explanation

    The Moon rotates once for every orbit it completes around Earth, a condition called synchronous rotation or tidal locking. Because the two periods match, the same hemisphere always faces Earth.

  21. Question 21Arithmetic Reasoning

    A jacket originally priced at $80 is on sale for 25% off. What is the sale price?

    1. $20
    2. $55
    3. $60 Correct answer.
    4. $65

    Explanation

    The discount is 25% of $80, or 0.25 × 80 = $20. The sale price is the original price minus the discount: 80 − 20 = $60.

  22. Question 22Arithmetic Reasoning

    Which decimal is equal to 3/8?

    1. 0.38
    2. 0.26
    3. 2.67
    4. 0.375 Correct answer.

    Explanation

    A fraction can be converted to a decimal by dividing the numerator by the denominator: 3 ÷ 8 = 0.375.

  23. Question 23Arithmetic Reasoning

    A crate holds 24 cans. How many cans are in 15 crates?

    1. 340
    2. 240
    3. 300
    4. 360 Correct answer.

    Explanation

    Multiply the number of cans per crate by the number of crates: 24 × 15 = 24 × 10 + 24 × 5 = 240 + 120 = 360.

  24. Question 24Arithmetic Reasoning

    Mia scored 82, 90, 76, and 88 on four tests. What is her average score?

    1. 86
    2. 84 Correct answer.
    3. 85
    4. 88

    Explanation

    The average is the sum of the scores divided by the number of tests: 82 + 90 + 76 + 88 = 336, and 336 ÷ 4 = 84.

  25. Question 25Arithmetic Reasoning

    How many ounces are in 3.5 pounds? (1 pound = 16 ounces)

    1. 48
    2. 52
    3. 56 Correct answer.
    4. 44

    Explanation

    Multiply the number of pounds by the number of ounces in a pound: 3.5 × 16 = 56 ounces.

  26. Question 26Arithmetic Reasoning

    How much simple interest does $500 earn at 4% annual interest for 1 year?

    1. $80
    2. $200
    3. $40
    4. $20 Correct answer.

    Explanation

    Simple interest is principal × rate × time: 500 × 0.04 × 1 = $20.

  27. Question 27Arithmetic Reasoning

    The ratio of boys to girls in a class is 3:5. If there are 24 boys, how many girls are there?

    1. 36
    2. 32
    3. 45
    4. 40 Correct answer.

    Explanation

    Each part of the ratio represents 24 ÷ 3 = 8 students. The number of girls is 5 parts, so 5 × 8 = 40.

  28. Question 28Arithmetic Reasoning

    A stock price rises from $40 to $50. What is the percent increase?

    1. 20%
    2. 25% Correct answer.
    3. 10%
    4. 15%

    Explanation

    Percent increase is the change divided by the original amount: (50 − 40) ÷ 40 = 10 ÷ 40 = 0.25, or 25%.

  29. Question 29Arithmetic Reasoning

    A machine produces 150 parts in 3 hours. At the same rate, how many parts does it produce in 8 hours?

    1. 500
    2. 450
    3. 400 Correct answer.
    4. 350

    Explanation

    The unit rate is 150 ÷ 3 = 50 parts per hour. In 8 hours the machine produces 50 × 8 = 400 parts.

  30. Question 30Arithmetic Reasoning

    A car travels 180 miles in 3 hours. At the same speed, how far will it travel in 5 hours?

    1. 300 miles Correct answer.
    2. 240 miles
    3. 360 miles
    4. 270 miles

    Explanation

    The speed is 180 ÷ 3 = 60 miles per hour. In 5 hours the car travels 60 × 5 = 300 miles.

  31. Question 31Arithmetic Reasoning

    A recipe for 4 servings uses 3 cups of rice. How many cups are needed for 10 servings?

    1. 7
    2. 6
    3. 7.5 Correct answer.
    4. 8

    Explanation

    Set up a proportion: 3 cups / 4 servings = x cups / 10 servings. Solving gives x = (3 × 10) ÷ 4 = 7.5 cups.

  32. Question 32Arithmetic Reasoning

    Evaluate: 8 + 2 × (5 − 3)^2

    1. 12
    2. 18
    3. 16 Correct answer.
    4. 40

    Explanation

    Following order of operations, first evaluate the parentheses: 5 − 3 = 2. Then apply the exponent: 2^2 = 4. Then multiply: 2 × 4 = 8. Finally add: 8 + 8 = 16.

  33. Question 33Arithmetic Reasoning

    A tank is 2/3 full. After 12 gallons are added, it is 5/6 full. What is the tank's capacity?

    1. 48 gallons
    2. 60 gallons
    3. 72 gallons Correct answer.
    4. 84 gallons

    Explanation

    The added water is the difference in fullness: 5/6 − 2/3 = 5/6 − 4/6 = 1/6 of the tank. Since 1/6 of the capacity is 12 gallons, the capacity is 12 × 6 = 72 gallons.

  34. Question 34Arithmetic Reasoning

    A $60 item is discounted 20%, and then 6% sales tax is added to the discounted price. What is the total cost?

    1. $55.20
    2. $52.00
    3. $48.00
    4. $50.88 Correct answer.

    Explanation

    The discounted price is 60 × 0.80 = $48. Tax is then applied to that price: 48 × 1.06 = $50.88.

  35. Question 35Arithmetic Reasoning

    A rectangle has a length of 12 feet and a width of 5 feet. What is its perimeter?

    1. 120 feet
    2. 60 feet
    3. 34 feet Correct answer.
    4. 17 feet

    Explanation

    Perimeter of a rectangle is 2(length + width): 2(12 + 5) = 2(17) = 34 feet.

  36. Question 36Arithmetic Reasoning

    A shirt costs $45 after a 25% discount. What was the original price?

    1. $60 Correct answer.
    2. $70
    3. $56.25
    4. $65

    Explanation

    After a 25% discount, the sale price is 75% of the original. So original = 45 ÷ 0.75 = $60.

  37. Question 37Arithmetic Reasoning

    A price is increased by 20%, and then the new price is decreased by 20%. The final price is what percent of the original price?

    1. 104%
    2. 98%
    3. 100%
    4. 96% Correct answer.

    Explanation

    Multiply the percent factors: 1.20 × 0.80 = 0.96, so the final price is 96% of the original price.

  38. Question 38Arithmetic Reasoning

    Pipe A can fill a tank in 6 hours, and pipe B can fill it in 12 hours. Working together, how long will they take?

    1. 9 hours
    2. 3 hours
    3. 4 hours Correct answer.
    4. 4.5 hours

    Explanation

    Add their rates: 1/6 + 1/12 = 2/12 + 1/12 = 3/12 = 1/4 tank per hour. At that rate, filling one tank takes 4 hours.

  39. Question 39Arithmetic Reasoning

    A student scored 80 on each of 3 tests and 90 on each of 2 tests. What is the overall average score?

    1. 85
    2. 86
    3. 84 Correct answer.
    4. 82

    Explanation

    Use a weighted average: (3 × 80 + 2 × 90) ÷ 5 = (240 + 180) ÷ 5 = 420 ÷ 5 = 84.

  40. Question 40Arithmetic Reasoning

    If 3/5 of a number is 45, what is 2/3 of that number?

    1. 45
    2. 30
    3. 60
    4. 50 Correct answer.

    Explanation

    First find the number: 45 ÷ (3/5) = 45 × 5/3 = 75. Then take 2/3 of 75: (2/3) × 75 = 50.

  41. Question 41Word Knowledge

    Choose the word that most nearly means ABUNDANT.

    1. fragile
    2. rare
    3. hidden
    4. ample Correct answer.

    Explanation

    Abundant describes something that exists in large quantity or supply. Ample carries the same sense of being more than enough, so it is the closest synonym. Sentences with clues such as 'plenty of' or 'a great deal' usually signal this meaning.

  42. Question 42Word Knowledge

    Choose the word that is most nearly opposite in meaning to EXPAND.

    1. stretch
    2. enlarge
    3. explain
    4. shrink Correct answer.

    Explanation

    To expand is to grow larger, spread out, or increase in size. An antonym must move in the other direction and mean to become smaller, which is what shrink expresses.

  43. Question 43Word Knowledge

    In the sentence 'The arid landscape supported few plants,' the word arid most nearly means:

    1. humid
    2. dry Correct answer.
    3. fertile
    4. cold

    Explanation

    The phrase 'supported few plants' is a context clue pointing to a lack of water. Arid means extremely dry, which explains why little vegetation grows there.

  44. Question 44Word Knowledge

    The prefix pre- in the word preview means:

    1. again
    2. against
    3. after
    4. before Correct answer.

    Explanation

    A preview is a showing that happens before the main event, so the prefix pre- means before. English uses other prefixes for the remaining ideas, such as re- for again and post- for after.

  45. Question 45Word Knowledge

    RAPID most nearly means:

    1. loud
    2. quick Correct answer.
    3. weak
    4. steady

    Explanation

    Rapid describes something that happens with great speed. Quick is the closest synonym, as in 'a rapid response' and 'a quick response.'

  46. Question 46Word Knowledge

    Which word is most nearly opposite in meaning to GENEROUS?

    1. polite
    2. kind
    3. wealthy
    4. stingy Correct answer.

    Explanation

    Generous describes a person who gives freely and shares with others. Its opposite is a person unwilling to give, which is the meaning of stingy.

  47. Question 47Word Knowledge

    CANDID most nearly means:

    1. humorous
    2. cautious
    3. angry
    4. frank Correct answer.

    Explanation

    Candid means honest and direct in speech, holding nothing back. Frank carries exactly that sense of open, straightforward expression, as in 'a candid answer.'

  48. Question 48Word Knowledge

    Choose the word that best completes the sentence: The music had a calming ____ on the restless recruits.

    1. effect Correct answer.
    2. affected
    3. affect
    4. effective

    Explanation

    The sentence needs a noun meaning 'result or influence,' and effect is that noun. Affect is normally a verb meaning to influence, so it cannot follow the article 'a' as the object of 'had.'

  49. Question 49Word Knowledge

    In the word fearless, the suffix -less means:

    1. without Correct answer.
    2. able to
    3. full of
    4. similar to

    Explanation

    A fearless person is one who is without fear, so the suffix -less means 'lacking' or 'without.' The opposite suffix -ful, as in fearful, means 'full of.'

  50. Question 50Word Knowledge

    In the sentence 'The sergeant's terse reply ended the conversation,' terse most nearly means:

    1. cheerful
    2. confused
    3. brief Correct answer.
    4. lengthy

    Explanation

    The clue that the reply 'ended the conversation' suggests it was short and cut things off. Terse means brief and to the point, often in a way that seems abrupt.

  51. Question 51Word Knowledge

    Which word is most nearly opposite in meaning to OBSOLETE?

    1. useless
    2. broken
    3. modern Correct answer.
    4. ancient

    Explanation

    Obsolete describes something no longer in use because it is out of date. The clearest opposite is modern, meaning current and up to date.

  52. Question 52Word Knowledge

    The Latin root bene-, as in benefit, means:

    1. poorly
    2. well Correct answer.
    3. against
    4. before

    Explanation

    A benefit is something good or helpful, and the root bene- means well or good. The root mal-, as in malfunction, carries the opposite meaning of badly.

  53. Question 53Word Knowledge

    VACANT most nearly means:

    1. empty Correct answer.
    2. crowded
    3. locked
    4. noisy

    Explanation

    A vacant room or seat is one that is not occupied. Empty is the closest synonym, as in 'a vacant apartment.'

  54. Question 54Word Knowledge

    Which word has the most negative connotation?

    1. confident
    2. assured
    3. proud
    4. arrogant Correct answer.

    Explanation

    Connotation is the feeling a word carries beyond its literal meaning. Arrogant suggests an overbearing sense of superiority, which is far more negative than the other choices.

  55. Question 55Word Knowledge

    Choose the word that best completes the sentence: The second squad performed ____ than the first.

    1. well
    2. better Correct answer.
    3. good
    4. best

    Explanation

    The word 'than' signals a comparison between two things, which requires the comparative form better. Best is superlative and is used when comparing three or more; good and well are not comparative forms.

  56. Question 56Word Knowledge

    OBTAIN most nearly means:

    1. acquire Correct answer.
    2. lose
    3. refuse
    4. hide

    Explanation

    To obtain something is to come to have it, usually through effort. Acquire means to gain possession of something, making it the closest match.

  57. Question 57Word Knowledge

    The Greek root chron-, as in chronological, means:

    1. place
    2. time Correct answer.
    3. order
    4. number

    Explanation

    A chronological list arranges events by when they happened, and the root chron- specifically means time. Words such as chronic and synchronize share that same root.

  58. Question 58Word Knowledge

    LACONIC most nearly means:

    1. brief Correct answer.
    2. generous
    3. gloomy
    4. talkative

    Explanation

    Laconic describes speech that uses very few words, often seeming blunt or dry. Brief captures that sense of shortness, as in 'a laconic reply.'

  59. Question 59Word Knowledge

    Which sentence uses the word imply correctly?

    1. I imply from your tone that you disagree.
    2. The memo implied that the deadline had moved. Correct answer.
    3. He implied the data to draw a conclusion.
    4. Her speech infered that changes were coming.

    Explanation

    To imply is to suggest something indirectly, so the speaker or writer does the implying while the listener draws the conclusion. The memo is the source of the suggestion, making 'implied' correct there. Infer works in the other direction and describes what a receiver concludes.

  60. Question 60Word Knowledge

    Which word is most nearly opposite in meaning to PRODIGAL?

    1. generous
    2. abundant
    3. lavish
    4. thrifty Correct answer.

    Explanation

    Prodigal describes reckless, wasteful spending, as in the biblical 'prodigal son.' Its opposite is a habit of saving and spending carefully, which is the meaning of thrifty.

  61. Question 61Paragraph Comprehension

    Honeybees communicate the location of food through a movement called the waggle dance. A bee that has found nectar returns to the hive and runs in a figure-eight pattern. The angle of the dance's straight run points toward the food relative to the sun, and the length of the run indicates distance. What is the passage mainly about?

    1. How bees share food locations Correct answer.
    2. Why honeybees prefer nectar to pollen
    3. The life cycle of a honeybee colony
    4. How honeybees build their honeycombs

    Explanation

    Main-idea questions ask for the point that the whole passage supports, not a single detail. Every sentence here describes how the waggle dance conveys direction and distance to other bees.

  62. Question 62Paragraph Comprehension

    The first public library in the small town opened in 1911 in a converted storefront. It held about 800 books, all donated by residents. Within five years, demand had grown so much that the town raised funds to construct a brick building that still serves as the library today. According to the passage, where did the library operate when it first opened?

    1. In a converted storefront Correct answer.
    2. In a brick building
    3. In a private home
    4. In a local school

    Explanation

    Detail questions are answered by information stated directly in the passage. The opening sentence says the library opened "in a converted storefront."

  63. Question 63Paragraph Comprehension

    After the storm, the crew worked to clear the debris from the road. Fallen branches and shattered signs lay scattered across both lanes. As used in the passage, the word "debris" most nearly means

    1. puddles
    2. wreckage Correct answer.
    3. vehicles
    4. road markings

    Explanation

    Vocabulary-in-context items are solved with nearby clues. The second sentence names the debris as "fallen branches and shattered signs" lying across the road, so the word refers to broken wreckage.

  64. Question 64Paragraph Comprehension

    To make a simple bird feeder, coat a pinecone with peanut butter, roll it in birdseed, and hang it from a branch with string. Place it where cats cannot reach. The author's main purpose is to

    1. give instructions for a project Correct answer.
    2. describe the habits of backyard birds
    3. explain why peanut butter attracts birds
    4. persuade readers to buy a bird feeder

    Explanation

    Purpose is signaled by the imperative verbs "coat," "roll," "hang," and "place," which walk the reader through steps in order. A series of ordered commands indicates a how-to passage.

  65. Question 65Paragraph Comprehension

    Maria looked at the darkened windows of the bakery and checked her watch again. She had left the house early to buy fresh rolls for breakfast, but the sign on the door was still turned to "Closed." What can be inferred about Maria?

    1. She works at the bakery.
    2. She forgot to bring money.
    3. She arrived before the shop opened. Correct answer.
    4. She decided to buy bread elsewhere.

    Explanation

    An inference must follow from clues the passage actually provides. A darkened shop, a "Closed" sign, and a repeated check of the time together imply she got there before opening hours.

  66. Question 66Paragraph Comprehension

    The new community pool opened in June. It has six lap lanes and a shallow area for children. The water is kept at a comfortable 82 degrees, and the locker rooms are spotless. Which statement from the passage expresses an opinion rather than a fact?

    1. "It has six lap lanes and a shallow area for children."
    2. "The new community pool opened in June."
    3. "The locker rooms are spotless." Correct answer.
    4. "The water is kept at a comfortable 82 degrees."

    Explanation

    A fact can be checked or measured; an opinion is a judgment someone makes. "Spotless" rates cleanliness on a personal scale, while opening dates, lane counts, and water temperature can all be verified.

  67. Question 67Paragraph Comprehension

    During sleep, the brain does not simply rest. It replays patterns of activity from the day, strengthening the connections that form memories. Students who sleep after studying a new skill perform it better the next day than those who stay awake the same number of hours. Researchers therefore suggest that a good night's rest is part of studying, not a break from it. Which statement best expresses the main idea?

    1. Students should study only in the evening.
    2. Memory depends mostly on the amount of time spent studying.
    3. Sleep actively helps the brain consolidate new learning. Correct answer.
    4. Sleep reduces the brain's overall activity.

    Explanation

    A main idea must account for the entire passage, not one sentence. The passage explains that the sleeping brain replays the day's patterns and strengthens memory connections, and it concludes that rest belongs to studying.

  68. Question 68Paragraph Comprehension

    The museum's newest exhibit displays tools used by farmers a century ago. Beside each plow and scythe hangs a photograph of the family that donated it. Visitors often linger longest at a worn wooden butter churn whose handle is smoothed from decades of use. What can be inferred about the exhibit?

    1. It displays modern farm machinery.
    2. It focuses on the history of museums.
    3. It highlights the families behind the objects. Correct answer.
    4. It was assembled without any public donations.

    Explanation

    Inference questions ask what the details point to without saying outright. Photographs of donating families and visitors pausing at a well-worn churn all suggest the exhibit is as much about people as about tools.

  69. Question 69Paragraph Comprehension

    Critics initially dismissed the bridge design as impractical, but the engineer's meticulous calculations eventually silenced doubters. Every stress point had been tested, and no detail had been left to chance. As used in the passage, "meticulous" most nearly means

    1. quickly completed
    2. extremely careful Correct answer.
    3. widely criticized
    4. overly expensive

    Explanation

    The following sentence acts as a definition: every stress point was tested and no detail left to chance. That description of thoroughness points to extreme care.

  70. Question 70Paragraph Comprehension

    The town's decision to remove the old oak from the square was shortsighted. The tree had shaded summer concerts for three generations, and the plan to replace it with a row of young saplings ignores what decades of growth provide. A parking lot is not an improvement. The tone of the passage is best described as

    1. critical and harsh Correct answer.
    2. anxious and fearful
    3. amused and playful
    4. neutral and detached

    Explanation

    Tone is revealed by word choice. Terms such as "shortsighted," "ignores," and the flat assertion that a parking lot is not an improvement all convey strong disapproval.

  71. Question 71Paragraph Comprehension

    First, the town council collected comments from residents about the dangerous intersection. Next, engineers surveyed traffic patterns and drafted three possible fixes. After a public hearing, the council chose the roundabout option, which will be built next spring. According to the passage, what happened immediately before the council chose the roundabout?

    1. The roundabout was constructed.
    2. Engineers drafted three possible fixes.
    3. A public hearing was held. Correct answer.
    4. Residents submitted their comments.

    Explanation

    Sequence questions follow the order signaled by words like "first," "next," and "after." The phrase "After a public hearing, the council chose" places the hearing directly before the decision.

  72. Question 72Paragraph Comprehension

    Because the region received half its usual rainfall, the reservoir dropped to its lowest level in twenty years. The city responded by limiting lawn watering to two days a week and by offering rebates for replacing grass with native plants. According to the passage, what caused the city to limit lawn watering?

    1. The construction of a new reservoir
    2. A shortage of rainfall Correct answer.
    3. A rise in water prices
    4. Complaints from homeowners

    Explanation

    Cause-and-effect questions look for stating words such as "because" and "responded by." The opening clause identifies reduced rainfall as the cause, and the city's restrictions are the effect.

  73. Question 73Paragraph Comprehension

    Unlike the printed encyclopedia, which took years to update, the online database can be corrected within hours of an error being reported. However, the printed version was reviewed by a team of editors before publication, while the online entries vary widely in how carefully they are checked. How does the passage compare the two sources?

    1. Online updates come faster but review is less consistent. Correct answer.
    2. The online database is slower but more reliable.
    3. Both sources are reviewed by the same team of editors.
    4. The printed version updates faster and is more accurate.

    Explanation

    Comparison passages set up matched contrasts. Here speed favors the online database, while consistent pre-publication review favors the printed encyclopedia.

  74. Question 74Paragraph Comprehension

    Each summer, the lake's shallow coves warm faster than its deeper center. Fish move into the coves to feed, and anglers follow them. By August, the coves are crowded with boats, and the deeper water is nearly empty of both fish and fishermen. What would most likely happen if a cool, cloudy week lowered the coves' temperature in August?

    1. Fish would move back toward deeper water. Correct answer.
    2. The lake's deep water would also cool quickly.
    3. Anglers would stop fishing on the lake entirely.
    4. The coves would become warmer than before.

    Explanation

    A prediction question asks what follows from the stated pattern. The passage ties fish to the warm coves, so removing that warmth removes the reason the fish gathered there.

  75. Question 75Paragraph Comprehension

    Many people assume that bats are blind. In fact, most bats can see, and some navigate largely by sight. The phrase "blind as a bat" has no basis in biology. The author's main purpose is to

    1. explain how bats build their homes
    2. describe the many species of bats
    3. persuade readers to protect bats
    4. correct a false belief about bats Correct answer.

    Explanation

    Phrases like "Many people assume" followed by "In fact" signal that the writer is setting a mistaken belief straight. The closing line about having no basis in biology confirms the corrective intent.

  76. Question 76Paragraph Comprehension

    The city planted 4,000 trees along its streets over five years to reduce summer heat. Sensors showed that shaded blocks were up to six degrees cooler than bare ones. Maintenance costs, however, ran higher than expected, and the program now depends on volunteers to water young trees. Which sentence best summarizes the passage?

    1. The city spent far too much money on its tree program.
    2. Sensors are the best way to measure urban heat.
    3. Volunteers should plant more trees in cities.
    4. A tree program cooled streets but raised upkeep costs. Correct answer.

    Explanation

    A summary must cover the whole passage, including any turn signaled by "however." This passage reports both a measured benefit and an unexpected cost, which only one option captures.

  77. Question 77Paragraph Comprehension

    For years, the diary was dismissed as a forgery because its ink matched a brand sold only after the author's death. A recent analysis, however, found that the paper was manufactured decades before the ink, and that the ink's formula was available to a small number of laboratories at the time the diary was written. The manuscript's defenders now argue that the ink evidence proves far less than skeptics claim. Which conclusion is best supported by the passage?

    1. The ink evidence no longer settles the diary's authenticity. Correct answer.
    2. The paper was made after the author's death.
    3. The diary has been proven genuine.
    4. The skeptics have withdrawn their objections entirely.

    Explanation

    A supported conclusion must stay within what the passage establishes. The new finding shows the ink was obtainable when the diary was written, which weakens the forgery case without proving the diary real.

  78. Question 78Paragraph Comprehension

    The committee's report runs to three hundred pages and cites four hundred sources, yet it never states a conclusion. It catalogs every opinion ever offered on the matter without weighing any of them. One admires the effort, but a reader looking for guidance will close the report no wiser than before. The author's attitude toward the report is best described as

    1. admiring but disappointed Correct answer.
    2. indifferent and bored
    3. enthusiastic and admiring
    4. outright hostile

    Explanation

    Attitude questions require balancing every signal in the passage. The concession "One admires the effort" grants respect, while "never states a conclusion" and "no wiser than before" register disappointment.

  79. Question 79Paragraph Comprehension

    Supporters of the new rail line argue that it will reduce highway congestion because commuters will leave their cars at home. That reasoning assumes commuters have a practical way to reach the stations. In most of the region's suburbs, no bus route passes within two miles of a proposed station, and parking is limited to a few hundred spaces. What point is the author making about the supporters' argument?

    1. Highway congestion is not a real problem.
    2. The argument ignores a condition it depends on. Correct answer.
    3. The rail line should be built in a different region.
    4. The rail line will certainly reduce congestion.

    Explanation

    This is an argument-analysis item: the author names an unstated requirement of the supporters' reasoning and then shows that the requirement is unmet in the suburbs. The point is that the reasoning rests on an assumption that may fail.

  80. Question 80Paragraph Comprehension

    The senator's speech was a patchwork quilt of borrowed phrases: a line from a campaign ad here, a slogan from a rival's platform there, stitched together without a common design. Listeners could recognize nearly every piece but could not say what the whole was meant to cover. The comparison to a patchwork quilt suggests that the speech was

    1. warm and personal in tone
    2. too short to convey a message
    3. carefully planned and unified
    4. a mix of parts without coherence Correct answer.

    Explanation

    Figurative comparisons must be read through the surrounding explanation. A quilt is made of unrelated scraps, and the passage spells this out with "without a common design" and listeners unable to say what the whole meant.

  81. Question 81Mathematics Knowledge

    The decimal 0.6 is equivalent to which fraction written in lowest terms?

    1. 5/3
    2. 3/50
    3. 3/5 Correct answer.
    4. 1/6

    Explanation

    The decimal 0.6 means six tenths, which can be written as 6/10. Dividing the numerator and denominator by their common factor 2 reduces it to 3/5, and no smaller factor is shared.

  82. Question 82Mathematics Knowledge

    Evaluate the expression 8 + 2 × 5.

    1. 50
    2. 40
    3. 18 Correct answer.
    4. 15

    Explanation

    Order of operations requires multiplication before addition. Multiplying 2 by 5 gives 10, and adding 8 gives 18.

  83. Question 83Mathematics Knowledge

    A rectangle has a length of 9 centimeters and a width of 4 centimeters. What is its area?

    1. 13
    2. 26
    3. 18
    4. 36 Correct answer.

    Explanation

    The area of a rectangle equals length times width. Multiplying 9 by 4 gives 36 square centimeters.

  84. Question 84Mathematics Knowledge

    What is the arithmetic mean of the numbers 4, 8, 10, and 14?

    1. 9 Correct answer.
    2. 10
    3. 14
    4. 36

    Explanation

    The mean is found by adding all the values and dividing by how many there are. The sum is 4 + 8 + 10 + 14 = 36, and 36 divided by 4 equals 9.

  85. Question 85Mathematics Knowledge

    Round the number 7.846 to the nearest hundredth.

    1. 7.9
    2. 7.85 Correct answer.
    3. 7.8
    4. 7.84

    Explanation

    The hundredths digit is 4, and the digit immediately to its right is 6. Because 6 is 5 or greater, the hundredths digit is increased by one, producing 7.85.

  86. Question 86Mathematics Knowledge

    If 3 pounds of apples cost $4.50, what is the cost of 7 pounds at the same rate?

    1. $12.00
    2. $10.00
    3. $9.00
    4. $10.50 Correct answer.

    Explanation

    Divide $4.50 by 3 pounds to get a unit price of $1.50 per pound. Multiplying $1.50 by 7 pounds gives $10.50.

  87. Question 87Mathematics Knowledge

    Solve for x: 5x − 7 = 3x + 9.

    1. 8 Correct answer.
    2. 4
    3. 1
    4. 6

    Explanation

    Subtract 3x from both sides to get 2x − 7 = 9, then add 7 to both sides to get 2x = 16. Dividing both sides by 2 gives x = 8.

  88. Question 88Mathematics Knowledge

    Simplify the expression (3^4 · 3^2) ÷ 3^3.

    1. 243
    2. 27 Correct answer.
    3. 9
    4. 81

    Explanation

    When multiplying powers with the same base, add the exponents to get 3^6, then subtract the exponent of the divisor to get 3^3. Since 3 × 3 × 3 = 27, the expression simplifies to 27.

  89. Question 89Mathematics Knowledge

    A right triangle has legs measuring 6 inches and 8 inches. What is the length of the hypotenuse?

    1. 100
    2. 10 Correct answer.
    3. 8
    4. 14

    Explanation

    The Pythagorean theorem states that the square of the hypotenuse equals the sum of the squares of the legs. Here 6² + 8² = 36 + 64 = 100, and the square root of 100 is 10.

  90. Question 90Mathematics Knowledge

    A town's population grows from 250 to 300 residents. What is the percent increase?

    1. 12%
    2. 17%
    3. 25%
    4. 20% Correct answer.

    Explanation

    The increase is 300 − 250 = 50, and percent change compares that increase to the original value. Dividing 50 by 250 gives 0.20, which is a 20% increase.

  91. Question 91Mathematics Knowledge

    A board measures 4.5 feet long. How many inches long is the board?

    1. 54 Correct answer.
    2. 48
    3. 45
    4. 52

    Explanation

    There are 12 inches in one foot, so multiply the number of feet by 12. Computing 4.5 × 12 gives 54 inches.

  92. Question 92Mathematics Knowledge

    Solve the inequality 2x + 5 < 13.

    1. x > 9
    2. x < 9
    3. x > 4
    4. x < 4 Correct answer.

    Explanation

    Subtract 5 from both sides to get 2x < 8, then divide both sides by the positive number 2, which keeps the inequality pointing the same way. The result is x < 4.

  93. Question 93Mathematics Knowledge

    A carpenter uses two-thirds of a 12-foot board. How many feet of the board are left?

    1. 6
    2. 8
    3. 4 Correct answer.
    4. 3

    Explanation

    Two-thirds of 12 feet is 8 feet, which is the amount used. Subtracting that from the original 12 feet leaves 4 feet.

  94. Question 94Mathematics Knowledge

    A bag contains 5 red, 3 blue, and 2 green marbles. If one marble is drawn at random, what is the probability that it is blue?

    1. 3/5
    2. 3/10 Correct answer.
    3. 3/8
    4. 1/3

    Explanation

    Probability equals the number of favorable outcomes divided by the total number of outcomes. The bag holds 5 + 3 + 2 = 10 marbles, and 3 of them are blue, so the probability is 3/10.

  95. Question 95Mathematics Knowledge

    A circle has a radius of 5 centimeters. What is its area in terms of pi?

    1. 50π
    2. 25π Correct answer.
    3. 5π
    4. 10π

    Explanation

    The area of a circle is π times the square of the radius. Squaring 5 gives 25, so the area is 25π square centimeters.

  96. Question 96Mathematics Knowledge

    Simplify the expression √50 + √18.

    1. 15√2
    2. 68
    3. 4√17
    4. 8√2 Correct answer.

    Explanation

    Factor each radicand into a perfect square times a remaining factor: √50 = 5√2 and √18 = 3√2. Adding the like radicals gives 5√2 + 3√2 = 8√2.

  97. Question 97Mathematics Knowledge

    The equation x² − 7x + 10 = 0 has two solutions. What is the sum of those solutions?

    1. 7 Correct answer.
    2. −7
    3. 10
    4. 5

    Explanation

    For a quadratic in the form x² + bx + c = 0, the sum of the roots equals −b. Here b is −7, so the sum of the solutions is 7, which can be checked against the roots 2 and 5.

  98. Question 98Mathematics Knowledge

    A right circular cylinder has a radius of 3 meters and a height of 10 meters. What is its volume in terms of pi?

    1. 60π
    2. 300π
    3. 90π Correct answer.
    4. 30π

    Explanation

    The volume of a cylinder is π times the square of the radius times the height. Squaring 3 gives 9, and multiplying by the height 10 gives 90, so the volume is 90π cubic meters.

  99. Question 99Mathematics Knowledge

    If 8 workers can build a wall in 12 days, how long will the same job take 6 workers working at the same rate?

    1. 15 days
    2. 16 days Correct answer.
    3. 9 days
    4. 14 days

    Explanation

    The job requires 8 × 12 = 96 worker-days of labor. Dividing that total by 6 workers gives 16 days, which makes sense because fewer workers take longer.

  100. Question 100Electronics Information

    A circuit has a 12-volt source connected across a 4-ohm resistor. What current flows through the resistor?

    1. 48 A
    2. 16 A
    3. 0.33 A
    4. 3 A Correct answer.

    Explanation

    Ohm's law states that current equals voltage divided by resistance (I = V/R). Dividing 12 volts by 4 ohms gives 3 amperes.

  101. Question 101Electronics Information

    A resistor is marked with the color bands brown, black, red, and gold. What is its nominal value?

    1. 10 kilohms
    2. 1 kilohm Correct answer.
    3. 100 ohms
    4. 10 ohms

    Explanation

    In the four-band code the first two bands give digits (brown = 1, black = 0) and the third band is the multiplier (red = 100). This yields 10 x 100 = 1000 ohms, or 1 kilohm, with gold indicating a 5 percent tolerance.

  102. Question 102Electronics Information

    Three resistors of 10 ohms, 20 ohms, and 30 ohms are connected in series. What is the total resistance of the combination?

    1. 60 ohms Correct answer.
    2. 30 ohms
    3. 600 ohms
    4. 10 ohms

    Explanation

    In a series circuit the total resistance is the sum of the individual resistances, since the same current passes through each one. Adding 10 + 20 + 30 gives 60 ohms.

  103. Question 103Electronics Information

    Two 100-ohm resistors are connected in parallel. What is the equivalent resistance of the pair?

    1. 150 ohms
    2. 50 ohms Correct answer.
    3. 200 ohms
    4. 100 ohms

    Explanation

    For two equal resistors in parallel, the equivalent resistance is half of one resistor's value because the product-over-sum formula gives (100 x 100)/(100 + 100) = 50 ohms. Parallel paths always yield a total lower than the smallest branch.

  104. Question 104Electronics Information

    A 120-volt circuit draws 2 amperes of current. How much power does the circuit consume?

    1. 60 W
    2. 0.017 W
    3. 240 W Correct answer.
    4. 122 W

    Explanation

    Electrical power equals voltage multiplied by current (P = V x I). Multiplying 120 volts by 2 amperes gives 240 watts.

  105. Question 105Electronics Information

    In what unit is capacitance measured?

    1. siemens
    2. ohms
    3. farads Correct answer.
    4. henries

    Explanation

    Capacitance is the ability to store charge per unit of voltage, and its unit is the farad. One farad equals one coulomb of stored charge per volt.

  106. Question 106Electronics Information

    What is the primary function of a diode in a circuit?

    1. Convert a varying DC level into a steady DC level
    2. Amplify a weak signal
    3. Permit current flow in essentially one direction Correct answer.
    4. Store electrical charge temporarily

    Explanation

    A diode is a semiconductor junction that conducts readily in one direction and blocks flow in the reverse direction. This one-way behavior makes it the basic element of rectification and polarity protection.

  107. Question 107Electronics Information

    An inductor in a circuit opposes any change in which quantity?

    1. Voltage
    2. Resistance
    3. Capacitance
    4. Current Correct answer.

    Explanation

    An inductor stores energy in a magnetic field, and that field resists changes in the current through the coil. This is why current in an inductive circuit cannot change instantaneously.

  108. Question 108Electronics Information

    A sine wave has a frequency of 60 hertz. What is its period?

    1. About 16.7 milliseconds Correct answer.
    2. 0.6 seconds
    3. 6 milliseconds
    4. 60 milliseconds

    Explanation

    Period is the reciprocal of frequency (T = 1/f). One divided by 60 hertz equals about 0.0167 seconds, or 16.7 milliseconds.

  109. Question 109Electronics Information

    A transformer has 100 turns on its primary and 400 turns on its secondary. If 120 volts AC is applied to the primary, what voltage appears across the secondary?

    1. 480 V Correct answer.
    2. 120 V
    3. 240 V
    4. 30 V

    Explanation

    The voltage ratio of a transformer equals the turns ratio (Vsecondary/Vprimary = Nsecondary/Nprimary). With a 4-to-1 turns step-up, 120 volts becomes 480 volts.

  110. Question 110Electronics Information

    A transistor is most commonly used in electronic circuits to do which of the following?

    1. Shift an AC signal to a different frequency
    2. Rectify alternating current into direct current
    3. Amplify signals or act as an electronic switch Correct answer.
    4. Hold a magnetic field constant

    Explanation

    By controlling a large current with a small input, a transistor can amplify a signal or operate as a fast switch. These two roles underlie nearly all modern electronic circuits.

  111. Question 111Electronics Information

    Adding a pentavalent impurity, such as phosphorus, to pure silicon produces which type of material?

    1. An N-type semiconductor Correct answer.
    2. A P-type semiconductor
    3. An insulator
    4. An intrinsic semiconductor

    Explanation

    A pentavalent atom donates an extra electron to the crystal, so the material gains free electrons as the majority carrier. Such donor-doped material is called N-type because the majority carriers are negative.

  112. Question 112Electronics Information

    A series circuit is powered by a 9-volt battery. Two resistors drop 3 volts and 4 volts respectively. What is the voltage drop across the third series resistor?

    1. 1 V
    2. 2 V Correct answer.
    3. 7 V
    4. 9 V

    Explanation

    Kirchhoff's voltage law states that the sum of the voltage drops around a closed loop equals the source voltage. The two known drops total 7 volts, so the third resistor must account for 9 - 7 = 2 volts.

  113. Question 113Electronics Information

    What is the purpose of the ground conductor in a three-wire AC power cord?

    1. It carries the normal return current during operation
    2. It provides a low-resistance path to earth for fault current Correct answer.
    3. It steps the line voltage down to a safer level
    4. It filters high-frequency noise from the supply

    Explanation

    The equipment grounding conductor normally carries no current. If a fault energizes the metal chassis, it gives fault current a low-impedance path to earth so the breaker or fuse trips quickly.

  114. Question 114Electronics Information

    In the American Wire Gauge system, what happens as the gauge number decreases from 12 to 10?

    1. The wire becomes thinner and carries less current
    2. The wire becomes a better electrical insulator
    3. The wire becomes longer
    4. The wire becomes thicker and can carry more current Correct answer.

    Explanation

    AWG numbers are inversely related to conductor size, so a smaller number means a larger diameter. Larger diameter lowers resistance and raises the current-carrying capacity.

  115. Question 115Electronics Information

    An AND gate produces a HIGH output only under which condition?

    1. The inputs are at different logic levels
    2. At least one input is HIGH
    3. All inputs are LOW
    4. All inputs are HIGH Correct answer.

    Explanation

    The AND function requires every input to be true before the output becomes true. A single LOW input forces the output LOW regardless of the other inputs.

  116. Question 116Electronics Information

    A capacitor is connected across a 60-hertz AC source. If the frequency is doubled while capacitance stays the same, what happens to the capacitive reactance?

    1. It is quadrupled
    2. It remains unchanged
    3. It is halved Correct answer.
    4. It is doubled

    Explanation

    Capacitive reactance is given by Xc = 1/(2 x pi x f x C), so it is inversely proportional to frequency. Doubling the frequency halves the reactance.

  117. Question 117Electronics Information

    A full-wave bridge rectifier is fed from a 60-hertz AC line. At what frequency does the ripple appear in the rectified output?

    1. 30 Hz
    2. 0 Hz
    3. 60 Hz
    4. 120 Hz Correct answer.

    Explanation

    A full-wave rectifier conducts on both halves of the input cycle, producing two output pulses per input cycle. Sixty hertz input therefore yields a 120-hertz ripple.

  118. Question 118Electronics Information

    A 12-volt source is connected across a 6-kilohm resistor in series with a 3-kilohm resistor. What voltage appears across the 3-kilohm resistor?

    1. 8 V
    2. 3 V
    3. 4 V Correct answer.
    4. 6 V

    Explanation

    The divider ratio is the resistance of interest divided by the total resistance, or 3 k divided by 9 k, which is one third. One third of 12 volts is 4 volts.

  119. Question 119Electronics Information

    A sine wave has a peak voltage of about 170 volts. What is its RMS value?

    1. 340 V
    2. 85 V
    3. 120 V Correct answer.
    4. 240 V

    Explanation

    For a sine wave, RMS voltage equals peak voltage divided by the square root of 2, which is about 0.707. Multiplying 170 volts by 0.707 gives roughly 120 volts RMS.

  120. Question 120Auto Information

    What is the main job of engine oil in a car engine?

    1. Increase the fuel octane rating
    2. Cool the tires while driving
    3. Lubricate moving engine parts Correct answer.
    4. Clean the windshield glass

    Explanation

    Oil forms a film between moving parts so metal surfaces slide on fluid rather than grinding together, reducing friction and wear. It also carries away some heat and suspended dirt, but lubrication is its primary function.

  121. Question 121Auto Information

    Which fluid carries heat away from the engine and releases it through the radiator?

    1. Power steering fluid
    2. Brake fluid
    3. Coolant Correct answer.
    4. Engine oil

    Explanation

    Coolant, usually a mix of antifreeze and water, circulates through the block and head, absorbs combustion heat, and dumps it to the air at the radiator. Its high boiling point and freeze protection let it work in all seasons.

  122. Question 122Auto Information

    When jump-starting a car, which terminals are joined by the red cable?

    1. Either post to either post
    2. Positive post to positive post Correct answer.
    3. Negative post to negative post
    4. Positive post to negative post

    Explanation

    The red cable is the positive lead, so it connects the positive post of the good battery to the positive post of the dead battery. The black cable then completes the circuit through negative and a ground point.

  123. Question 123Auto Information

    Tire pressure readings are most accurate when the tires are in which condition?

    1. Whenever the tires feel warm
    2. Before the car has been driven Correct answer.
    3. After a long highway drive
    4. While the engine is running

    Explanation

    Tires are specified as cold, meaning they have not been driven for a few hours. Rolling friction heats the air inside, raising pressure and giving a falsely high reading.

  124. Question 124Auto Information

    Which tool uses a long handle to apply extra leverage when breaking loose a rusted bolt?

    1. A flare nut wrench
    2. A torque wrench
    3. A feeler gauge
    4. A breaker bar Correct answer.

    Explanation

    A breaker bar is a long, non-ratcheting handle that multiplies force at the socket, which is why it is used to crack loose stubborn fasteners. A torque wrench is then used to tighten to a specified value.

  125. Question 125Auto Information

    Which underhood tank should be filled with windshield washer solvent?

    1. The tank marked with an oil can icon
    2. The tank marked with a brake drum icon
    3. The tank marked with a thermometer icon
    4. The tank marked with a windshield symbol Correct answer.

    Explanation

    Reservoir caps carry standard icons that identify their contents, and the windshield-and-spray symbol marks washer solvent. Matching the icon prevents topping off the wrong system.

  126. Question 126Auto Information

    A brake pedal that feels spongy and sinks toward the floor most likely indicates what condition?

    1. Low tire pressure
    2. Worn brake pads
    3. A loose lug nut
    4. Air in the hydraulic lines Correct answer.

    Explanation

    Brake fluid is nearly incompressible, but trapped air compresses under pressure, so the pedal feels soft and travels farther. The system must be bled to remove the air.

  127. Question 127Auto Information

    A battery warning light comes on while the car is being driven. What does this most likely mean?

    1. The battery is fully charged
    2. The headlights were left on
    3. The alternator is not charging Correct answer.
    4. The starter motor draws too much current

    Explanation

    With the engine running, the light signals that charging voltage has fallen below what the alternator should supply. The car is then running off battery reserve and will eventually stall or fail to restart.

  128. Question 128Auto Information

    What symptom results from a cooling system thermostat stuck in the open position?

    1. The engine overheats within a few minutes
    2. The coolant boils out of the overflow tank
    3. The engine warms up slowly and heat is weak Correct answer.
    4. The radiator fan never turns on

    Explanation

    An open thermostat lets coolant circulate through the radiator all the time, so the engine takes far too long to reach operating temperature. The cabin heater also blows only lukewarm air because the coolant never gets hot enough.

  129. Question 129Auto Information

    A spark plug gapped much wider than specification will most likely cause which problem?

    1. The fuel pump will run continuously
    2. The battery will not hold a charge
    3. The engine idles faster than normal
    4. The engine may misfire under load Correct answer.

    Explanation

    A wider gap raises the voltage needed to jump it, and under cylinder pressure that demand can exceed what the ignition coil can deliver. The result is a misfire, most noticeable during acceleration or heavy load.

  130. Question 130Auto Information

    Which complaint points to worn shock absorbers or struts?

    1. The steering wheel shakes at idle
    2. The transmission slips when shifting
    3. The body keeps bouncing after a bump Correct answer.
    4. The brake pedal pulses when stopping

    Explanation

    Dampers control spring oscillation, so when they wear out the springs keep rebounding and the body floats or bounces several times after a bump. The vehicle may also nosedive when braking or lean heavily in turns.

  131. Question 131Auto Information

    How is automatic transmission fluid normally checked on a vehicle with a dipstick?

    1. Engine running, transmission in park, fluid hot Correct answer.
    2. Engine off, transmission in neutral, fluid cold
    3. Engine running, transmission in drive, fluid cold
    4. Engine off, transmission in park, fluid hot

    Explanation

    Most dipstick-equipped automatics are checked on level ground with the engine idling in park and the fluid at normal operating temperature. At that point the fluid is fully circulated and expanded, so the reading matches the marks on the stick.

  132. Question 132Auto Information

    Blue-gray smoke from the tailpipe is a sign of what condition?

    1. The engine is running too rich
    2. Coolant is entering the cylinders
    3. Oil is being burned in the engine Correct answer.
    4. The catalytic converter is new

    Explanation

    Blue-gray exhaust means oil is reaching the combustion chambers, typically past worn valve guides or piston rings. The oil burns and leaves the characteristic bluish haze plus a possible oil smell.

  133. Question 133Auto Information

    Which symptom is typical of a clogged fuel filter?

    1. A rapid clicking from the starter
    2. Loss of power at high speed and stalling Correct answer.
    3. A steady squeal from the front wheels
    4. Hard shifting from first to second gear

    Explanation

    A restricted filter cannot flow enough fuel when demand is high, so the engine starves and loses power, hesitates, or stalls. It may idle acceptably and only act up under acceleration or at highway speed.

  134. Question 134Auto Information

    What is the correct way to clean the white, crusty corrosion from battery terminals?

    1. Soak them in clean motor oil
    2. Rinse them with gasoline
    3. Scrub them with baking soda and water Correct answer.
    4. Coat them with brake fluid

    Explanation

    The crust is acidic sulfate, so a baking soda and water paste neutralizes it and a brush lifts it away. The terminals are then rinsed, dried, and protected with a light coating of terminal grease.

  135. Question 135Auto Information

    A high-pitched squeal from a serpentine belt right after a cold start usually means what?

    1. The belt is worn, glazed, or loose Correct answer.
    2. The battery is overcharging
    3. The water pump bearing is new
    4. The power steering pump is failing

    Explanation

    A glazed, hardened, or under-tensioned belt slips on its pulleys, producing a squeal that is often loudest on a cold, damp start. Checking belt condition and the automatic tensioner usually confirms the cause.

  136. Question 136Auto Information

    A car's headlights are dim at idle but brighten noticeably when the engine is revved. What does this indicate?

    1. The dimmer switch is defective
    2. The headlight bulbs are the wrong type
    3. The charging system output is too low at idle Correct answer.
    4. The battery cables are too short

    Explanation

    Brightness follows system voltage, so the change with engine speed points to the alternator producing too little current at idle. A slipping belt, worn alternator, or bad ground can all lower output until rpm rises.

  137. Question 137Auto Information

    A vehicle pulls to the left, and the left front tire shows heavy wear along its inner edge. What is the most likely cause?

    1. Low tire pressure in the rear tires
    2. A sticking front brake caliper
    3. Excessive negative camber on that wheel Correct answer.
    4. A weak front strut on the right side

    Explanation

    Camber tilts the top of the wheel inward, loading the inner shoulder of the tire, which wears that edge and can also cause a pull. An alignment check confirms the angle before the tire is ruined.

  138. Question 138Auto Information

    Engine oil that drains out milky or tan after a coolant loss suggests what failure?

    1. A worn serpentine belt
    2. A clogged air filter
    3. A faulty fuel injector
    4. A blown head gasket Correct answer.

    Explanation

    Coolant and oil are supposed to stay in separate passages, so a milky emulsion means they are mixing, usually across a failed head gasket or a cracked casting. The condition also causes white exhaust smoke and unexplained coolant loss.

  139. Question 139Auto Information

    The ABS warning light stays on in a car whose brakes otherwise feel normal. What does this mean?

    1. The parking brake is stuck applied
    2. ABS is disabled; normal brakes still work Correct answer.
    3. The brake fluid reservoir is overfilled
    4. The brakes will not function at all

    Explanation

    An ABS lamp means the controller has detected a fault and disabled the anti-lock function, while conventional hydraulic braking remains available. The vehicle will stop normally but may skid on slick surfaces until the fault is repaired.

  140. Question 140Shop Information

    Which measuring tool is designed to measure the inside diameter of a pipe?

    1. Inside caliper Correct answer.
    2. Feeler gauge
    3. Combination square
    4. Outside caliper

    Explanation

    Inside calipers have legs that face outward so they can be adjusted to touch the inner walls of a bore or pipe, and the gap is then measured with a rule. Outside calipers do the opposite, measuring outer dimensions.

  141. Question 141Shop Information

    In a shop, safety glasses are worn primarily to protect the eyes from which hazard?

    1. Inhalation of toxic fumes
    2. Hearing damage from noise
    3. Flying chips and debris Correct answer.
    4. Burns from hot metal

    Explanation

    Safety glasses are impact protection; they shield the eyes from flying chips, sparks, dust, and fragments thrown off by tools. Hazards such as fumes and noise require different protective equipment.

  142. Question 142Shop Information

    A bolt is marked 1/4-20 UNC. What does the 20 represent?

    1. Bolt length in inches
    2. Material of the bolt
    3. Threads per inch Correct answer.
    4. Grade rating

    Explanation

    In unified thread callouts the number after the diameter gives the number of threads per inch, so a 1/4-20 bolt has 20 threads in every inch of length. Bolt length would be a separate dimension.

  143. Question 143Shop Information

    A hacksaw is the correct hand tool for cutting which material?

    1. Cardboard
    2. Sheet rubber
    3. Wood with the grain
    4. Metal Correct answer.

    Explanation

    A hacksaw uses a fine-tooth, hardened blade held under tension and is intended for cutting metal stock such as pipe, rod, and angle. Softer materials tend to clog its fine teeth.

  144. Question 144Shop Information

    What is the safest practice when changing the bit in a corded electric drill?

    1. Leave the chuck key in place
    2. Wear loose sleeves
    3. Hold the workpiece by hand
    4. Unplug the drill first Correct answer.

    Explanation

    Removing power at the plug guarantees the drill cannot start while your hands are on the chuck, which is the reason for the safety rule. Chuck keys also must be removed immediately after use, and loose clothing can catch in rotating tools.

  145. Question 145Shop Information

    Which of these metals is classified as ferrous?

    1. Copper
    2. Brass
    3. Steel Correct answer.
    4. Aluminum

    Explanation

    Ferrous simply means the material contains iron as its principal element, and steel is an alloy of iron and carbon. Aluminum, copper, and brass contain no iron.

  146. Question 146Shop Information

    On a 0-to-1 inch outside micrometer, the spindle turns 3 full revolutions past zero and the thimble reads 12. What is the measurement?

    1. 0.312 in
    2. 0.112 in
    3. 0.087 in Correct answer.
    4. 0.075 in

    Explanation

    Each full revolution of the spindle advances the measuring faces 0.025 in, so 3 revolutions equal 0.075 in, and each thimble division adds 0.001 in, so 12 divisions equal 0.012 in. Adding them gives 0.087 in.

  147. Question 147Shop Information

    Which drill bit should be selected to bore a hole in a concrete block?

    1. Auger bit
    2. Center drill
    3. Brad-point bit
    4. Masonry bit Correct answer.

    Explanation

    Masonry bits have a carbide insert that survives the abrasive, chipping action needed for concrete and brick, and they are used with a hammer drill. The other bits listed are made for wood or metal.

  148. Question 148Shop Information

    A tap is used in the shop to perform which operation?

    1. Remove a broken bolt
    2. Cut external threads on a rod
    3. Enlarge a hole without cutting threads
    4. Cut internal threads in a hole Correct answer.

    Explanation

    Taps are threaded cutting tools that are turned into a drilled hole to form internal threads for a bolt or screw. External threads on a rod are cut with a die.

  149. Question 149Shop Information

    A rip saw blade is designed for cutting wood in which direction?

    1. Along the grain Correct answer.
    2. Only through plywood
    3. Across the grain
    4. Only through nonferrous metal

    Explanation

    A rip saw has chisel-like teeth that cut with the grain, making long lengthwise cuts. A crosscut saw uses knife-like teeth to sever fibers across the grain.

  150. Question 150Shop Information

    What is the purpose of flux when soldering two metal parts together?

    1. Mark the joint for inspection
    2. Cool the joint as it forms
    3. Remove oxidation from the metal Correct answer.
    4. Increase the strength of the solder joint

    Explanation

    Flux chemically cleans the surfaces and blocks oxygen while the joint is heated, so solder can wet and bond to bare metal. It does not add strength itself; the filler metal does that.

  151. Question 151Shop Information

    Why is a center punch used before drilling a hole?

    1. Mark the hole location Correct answer.
    2. Remove a rivet head
    3. Enlarge an existing hole
    4. Check a 90-degree angle

    Explanation

    A struck center punch leaves a small conical dimple that guides the drill point and keeps the bit from walking across the surface. Layout lines alone often cannot hold a spinning drill in place.

  152. Question 152Shop Information

    The decimal equivalent of 0.375 inch is which fraction?

    1. 1/4 in
    2. 1/2 in
    3. 5/16 in
    4. 3/8 in Correct answer.

    Explanation

    Dividing 3 by 8 gives 0.375, so 3/8 in is the fractional equivalent. Converting in the other direction means dividing the numerator by the denominator.

  153. Question 153Shop Information

    What does cutting fluid do when drilling a hole in steel?

    1. Soften the metal being drilled
    2. Prevent the drill from cutting
    3. Cool the tool and clear chips Correct answer.
    4. Increase the drill speed

    Explanation

    Cutting fluid carries heat away from the drill point and work, lubricates the chip flow, and helps flush chips out of the flutes. This extends tool life and improves hole finish.

  154. Question 154Shop Information

    What is the function of a lock washer placed under a nut?

    1. Spread the load over a larger area
    2. Provide a smooth bearing surface
    3. Increase the clamping length
    4. Resist loosening from vibration Correct answer.

    Explanation

    A split or toothed lock washer is designed to bite into the nut and work surface so the fastener resists backing off under vibration. Spreading load and providing a smooth seat are jobs for a flat washer.

  155. Question 155Shop Information

    How close should the tool rest be set to the wheel on a bench grinder?

    1. 1/8 inch Correct answer.
    2. 1/2 inch
    3. 1 inch
    4. 2 inches

    Explanation

    The tool rest should be kept within about 1/8 inch of the wheel so a workpiece cannot be pulled down into the gap and jammed. The tongue guard above the wheel follows a similar close-clearance rule.

  156. Question 156Shop Information

    A drawing is made at a scale of 1:4. A feature measures 3 inches on the drawing. What is the actual size of the feature?

    1. 12 in Correct answer.
    2. 7 in
    3. 0.75 in
    4. 3 in

    Explanation

    A scale of 1:4 means one unit on the drawing represents four units on the real part. Multiplying the drawn length by 4 gives 3 x 4 = 12 inches.

  157. Question 157Shop Information

    Which heat-treatment process hardens steel by heating it and then cooling it rapidly?

    1. Normalizing
    2. Tempering
    3. Annealing
    4. Quenching Correct answer.

    Explanation

    Quenching cools austenitized steel quickly in water, oil, or air to trap a hard martensitic structure. Annealing and normalizing cool slowly to soften or refine the structure, and tempering is a milder reheating done after hardening.

  158. Question 158Shop Information

    A bolt is specified as 3/8-16 UNC. How many threads are contained in a 1-1/2 inch length of that bolt?

    1. 12
    2. 16
    3. 24 Correct answer.
    4. 48

    Explanation

    The 16 in the callout means 16 threads per inch, so a 1-1/2 inch length holds 16 x 1.5 = 24 threads. Multiplying threads per inch by the length gives the count.

  159. Question 159Shop Information

    Which file cut removes metal most quickly when roughing out a workpiece?

    1. Single-cut file
    2. Wood rasp
    3. Double-cut file Correct answer.
    4. Curved-tooth file

    Explanation

    A double-cut file has two rows of teeth crossing each other, producing small chips and fast stock removal. Single-cut files have one row of teeth and are used for finishing and sharpening.

  160. Question 160Mechanical Comprehension

    In a first-class lever, where is the fulcrum located?

    1. At the effort end of the bar
    2. Between the effort and the load Correct answer.
    3. At the load end of the bar
    4. Outside the load, past the bar

    Explanation

    A first-class lever places the pivot point between the applied effort and the resistance being moved, as with a seesaw or a crowbar. The relative distances from the fulcrum then set the force advantage.

  161. Question 161Mechanical Comprehension

    A single fixed pulley is used to raise a load. Ignoring friction, what is its ideal mechanical advantage?

    1. 1 Correct answer.
    2. 4
    3. 0.5
    4. 2

    Explanation

    A fixed pulley only redirects the effort; the rope tension on both sides equals the applied force, so no force is multiplied. Its ideal mechanical advantage is therefore 1.

  162. Question 162Mechanical Comprehension

    How does an inclined plane reduce the force needed to raise an object?

    1. It decreases the weight of the object
    2. It shortens the distance the object travels
    3. It removes friction from the object
    4. It spreads the lift over a longer path Correct answer.

    Explanation

    A ramp trades force for distance: the same amount of work is done, but over a longer path, so the force required at any moment is smaller. The object's weight itself does not change.

  163. Question 163Mechanical Comprehension

    Two external gears mesh with each other. If the driver gear turns clockwise, the driven gear turns...

    1. It does not rotate
    2. Clockwise
    3. At half speed in the same direction
    4. Counterclockwise Correct answer.

    Explanation

    When two gears mesh externally, their teeth push against each other at the contact point, so the gears rotate in opposite directions. A clockwise driver therefore produces a counterclockwise driven gear.

  164. Question 164Mechanical Comprehension

    A heavy crate is slid across four different floors. Which floor produces the greatest friction force?

    1. Oiled metal
    2. Rough concrete Correct answer.
    3. Polished steel
    4. Wet ice

    Explanation

    Sliding friction depends on how rough and interlocking the contacting surfaces are. Rough concrete grips the crate far more than smooth or lubricated surfaces.

  165. Question 165Mechanical Comprehension

    A uniform wooden ruler balances on a pencil placed at its exact middle. Where is the ruler's center of gravity?

    1. At its lower end
    2. Slightly above the pencil
    3. At its midpoint Correct answer.
    4. At its heavier end

    Explanation

    For a uniform object, weight is distributed evenly, so the total weight acts at the geometric center. The ruler balances where its center of gravity sits directly over the support.

  166. Question 166Mechanical Comprehension

    A lever has an effort arm of 2.0 m and a load arm of 0.5 m. What is its ideal mechanical advantage?

    1. 0.25
    2. 4 Correct answer.
    3. 2.5
    4. 1.5

    Explanation

    The ideal mechanical advantage of a lever is the effort arm divided by the load arm. Here 2.0 m ÷ 0.5 m gives 4, meaning the lever multiplies force four times.

  167. Question 167Mechanical Comprehension

    A single movable pulley supports a load on two rope segments. Ignoring friction and the pulley's weight, its ideal mechanical advantage is...

    1. 4
    2. 0.5
    3. 1
    4. 2 Correct answer.

    Explanation

    A movable pulley hangs on two segments of the same rope, so the load is shared between them and each segment carries half the load. The effort needed is therefore half the load, giving an ideal mechanical advantage of 2.

  168. Question 168Mechanical Comprehension

    A 200 N crate is pushed up a frictionless ramp 4 m long that rises 1 m. What effort force parallel to the ramp is needed?

    1. 200 N
    2. 50 N Correct answer.
    3. 800 N
    4. 25 N

    Explanation

    The ideal mechanical advantage of a ramp is its length divided by its height, here 4 ÷ 1 = 4. Dividing the load by this advantage gives 200 N ÷ 4 = 50 N of effort.

  169. Question 169Mechanical Comprehension

    A 30-tooth driver gear meshes with a 10-tooth driven gear. If the driver turns at 60 rpm, the driven gear turns at...

    1. 60 rpm
    2. 20 rpm
    3. 30 rpm
    4. 180 rpm Correct answer.

    Explanation

    Driven speed equals driver speed multiplied by the ratio of driver teeth to driven teeth: 60 × (30 ÷ 10) = 180 rpm. The small driven gear must turn faster to keep pace with the large driver.

  170. Question 170Mechanical Comprehension

    In a hydraulic press, the input piston has an area of 5 cm² and the output piston has an area of 50 cm². A force of 100 N on the input piston produces what output force?

    1. 1000 N Correct answer.
    2. 500 N
    3. 100 N
    4. 10 N

    Explanation

    Pressure applied to a confined fluid is transmitted undiminished, so force scales with piston area. The output force is 100 N × (50 ÷ 5) = 1000 N.

  171. Question 171Mechanical Comprehension

    A wheel and axle has a wheel radius of 30 cm and an axle radius of 5 cm. Ignoring friction, its ideal mechanical advantage is...

    1. 0.17
    2. 6 Correct answer.
    3. 5
    4. 35

    Explanation

    For a wheel and axle, the ideal mechanical advantage is the wheel radius divided by the axle radius. That gives 30 cm ÷ 5 cm = 6.

  172. Question 172Mechanical Comprehension

    A machine receives 500 J of work and delivers 400 J of useful work. What is its efficiency?

    1. 80% Correct answer.
    2. 100%
    3. 20%
    4. 125%

    Explanation

    Efficiency compares useful output work with total input work: 400 J ÷ 500 J = 0.80, or 80%. The remaining 100 J is lost mainly to friction.

  173. Question 173Mechanical Comprehension

    A force of 50 N is applied perpendicular to a wrench handle 0.40 m from the bolt. What torque is produced about the bolt?

    1. 20 N·m Correct answer.
    2. 2.0 N·m
    3. 12.5 N·m
    4. 200 N·m

    Explanation

    Torque equals force times the perpendicular distance from the pivot: 50 N × 0.40 m = 20 N·m. Applying the force perpendicular maximises the turning effect.

  174. Question 174Mechanical Comprehension

    A force of 600 N is spread evenly over an area of 0.20 m². What pressure is exerted?

    1. 1200 Pa
    2. 300 Pa
    3. 3000 Pa Correct answer.
    4. 120 Pa

    Explanation

    Pressure is force divided by area: 600 N ÷ 0.20 m² = 3000 Pa. Spreading a force over a larger area reduces the pressure.

  175. Question 175Mechanical Comprehension

    A motor does 1200 J of work in 4.0 s. What is its power output?

    1. 1200 W
    2. 3000 W
    3. 300 W Correct answer.
    4. 4800 W

    Explanation

    Power is the rate of doing work, calculated as work divided by time: 1200 J ÷ 4.0 s = 300 W. Doing the same work faster would raise the power.

  176. Question 176Mechanical Comprehension

    A gear train has a 20-tooth driver turning a 40-tooth gear. A 10-tooth gear on the same shaft as the 40-tooth gear then drives a 50-tooth output gear. If the driver turns at 300 rpm, the output gear turns at...

    1. 60 rpm
    2. 150 rpm
    3. 30 rpm Correct answer.
    4. 600 rpm

    Explanation

    Each meshing pair changes speed by the ratio of its tooth counts. The first pair slows the shaft by 40 ÷ 20 = 2, giving 150 rpm; the second slows it by 50 ÷ 10 = 5, giving 150 ÷ 5 = 30 rpm.

  177. Question 177Mechanical Comprehension

    In a block and tackle, pulling 6.0 m of rope raises a 400 N load 1.0 m. The effort applied is 100 N. What is the efficiency of the system?

    1. 67% Correct answer.
    2. 40%
    3. 150%
    4. 25%

    Explanation

    Efficiency compares useful work out with work put in. Useful work is 400 N × 1.0 m = 400 J; input work is 100 N × 6.0 m = 600 J; the ratio is 400 ÷ 600, about 67%.

  178. Question 178Mechanical Comprehension

    A 400 N crate is pushed across a level floor at constant speed by a horizontal force of 200 N. What is the coefficient of kinetic friction between crate and floor?

    1. 0.40
    2. 0.50 Correct answer.
    3. 2.0
    4. 0.25

    Explanation

    At constant speed the pushing force exactly balances friction, so friction is 200 N. On a level floor the normal force equals the weight, 400 N, and the coefficient is 200 ÷ 400 = 0.50.

  179. Question 179Mechanical Comprehension

    A uniform 4.0 m beam weighs 200 N and is supported at both ends. A 600 N load hangs 1.0 m from the left end. What is the upward reaction at the left support?

    1. 400 N
    2. 550 N Correct answer.
    3. 250 N
    4. 600 N

    Explanation

    Take moments about the right support: the left reaction acts at 4.0 m, the beam's weight at 2.0 m, and the load at 3.0 m. So R × 4.0 = 200 × 2.0 + 600 × 3.0 = 2200, giving R = 550 N.

  180. Question 180Assembling Objects

    One part of an assembly ends in a round peg 1.5 cm in diameter. Which feature on the mating part will hold that peg snugly?

    1. A round hole of 1.5 cm diameter Correct answer.
    2. A round hole of 2 cm diameter
    3. A round hole of 1 cm diameter
    4. A square slot measuring 1.5 cm on a side

    Explanation

    A peg seats snugly only in an opening of the same shape and the same size. Matching the 1.5 cm diameter gives full contact around the peg with no looseness or interference.

  181. Question 181Assembling Objects

    A flat panel has three evenly spaced slots along its right edge. Which mating part will join with it along that edge?

    1. A part with three tabs spaced to match the slots Correct answer.
    2. A part with two evenly spaced tabs along one edge
    3. A part with three slots along one edge
    4. A part with four evenly spaced tabs

    Explanation

    Each slot on one piece must receive exactly one tab from the other, and the spacing of the tabs must line up with the spacing of the slots. Three matching tabs satisfy both conditions.

  182. Question 182Assembling Objects

    A rectangular panel measures 4 cm by 3 cm. Which single piece, joined along an entire edge, completes it to a 4 cm by 6 cm rectangle?

    1. A 6 cm by 4 cm rectangle
    2. A 4 cm by 6 cm rectangle
    3. A 3 cm by 3 cm square
    4. A 4 cm by 3 cm rectangle Correct answer.

    Explanation

    The finished rectangle keeps the panel's 4 cm width and needs a total height of 6 cm, so 3 cm of height is still missing. The added piece must therefore be 4 cm by 3 cm, with its 4 cm edge against the panel's 4 cm edge.

  183. Question 183Assembling Objects

    A puzzle piece is picked up, turned 90 degrees, and set back down. Which feature of the piece is unchanged by that turn?

    1. The direction its longest edge faces
    2. The lengths of its edges Correct answer.
    3. The corner that points upward
    4. Its position on the table

    Explanation

    Rotation changes only orientation and position, not the size or shape of the piece. Edge lengths, angles, and area all survive a rotation intact.

  184. Question 184Assembling Objects

    In a flat assembly, three pieces meet at one point with no gap and no overlap. Two of the angles at that point measure 90 degrees and 135 degrees. What is the third angle?

    1. 135 degrees Correct answer.
    2. 45 degrees
    3. 180 degrees
    4. 90 degrees

    Explanation

    Angles meeting at a point with no gap and no overlap total 360 degrees. Subtracting 90 and 135 from 360 leaves 135 degrees for the third piece.

  185. Question 185Assembling Objects

    A piece ends in a triangular tab. Which socket on the mating piece will receive it?

    1. A round hole measuring the same width
    2. A triangular notch that matches in size Correct answer.
    3. A triangular notch half the size
    4. A square notch of the same width

    Explanation

    A tab seats only in a notch of the same outline and the same dimensions. A triangular notch of matching size gives full contact along all three sides of the tab.

  186. Question 186Assembling Objects

    Two congruent right triangles with legs 5 cm and 12 cm are joined along their hypotenuses. What shape do they form?

    1. A square 12 cm on a side
    2. A rectangle 13 cm by 5 cm
    3. A parallelogram with sides 5 cm and 13 cm
    4. A rectangle 5 cm by 12 cm Correct answer.

    Explanation

    Joining two congruent right triangles along the hypotenuse places the two right angles at opposite corners, and the legs become the sides. The result is a rectangle whose sides are the two legs, 5 cm and 12 cm, with the hypotenuse as its diagonal.

  187. Question 187Assembling Objects

    A rectangular panel 10 cm by 14 cm is cut into three pieces with no waste. Two of the pieces have areas of 40 square cm and 55 square cm. What is the area of the third piece?

    1. 95 square cm
    2. 35 square cm
    3. 140 square cm
    4. 45 square cm Correct answer.

    Explanation

    Cutting with no waste conserves area, so the pieces must add up to the panel's area of 140 square cm. Subtracting 40 and 55 from 140 leaves 45 square cm.

  188. Question 188Assembling Objects

    Four congruent equilateral triangles are joined edge to edge with no overlap. Which figure can they make?

    1. A regular hexagon with sides equal to the triangle sides
    2. A square with sides equal to the triangle sides
    3. An equilateral triangle with sides twice as long Correct answer.
    4. A rectangle twice as long as it is wide

    Explanation

    Three triangles placed corner to corner around a shared point leave a triangular gap that the fourth triangle fills exactly. The result is a larger equilateral triangle whose side is twice the side of a small triangle.

  189. Question 189Assembling Objects

    A square has one corner cut off by a straight cut joining the midpoints of the two sides that meet at that corner. How many sides does the resulting shape have?

    1. 3
    2. 4
    3. 5 Correct answer.
    4. 6

    Explanation

    The cut shortens two existing sides but does not remove them, and it introduces one new straight edge across the corner. Four original sides plus one new edge give five sides.

  190. Question 190Assembling Objects

    One piece of an assembly has a convex arc of radius 4 cm along its edge, bulging outward. To make a tight joint, what must the mating edge have?

    1. A concave arc of radius 4 cm Correct answer.
    2. A convex arc of radius 4 cm
    3. A concave arc of radius 2 cm
    4. A straight edge 4 cm long

    Explanation

    A mating edge is the complement of the edge it meets: a bulge pairs with a hollow of the same curvature. A concave arc of radius 4 cm nests against the convex arc with full contact.

  191. Question 191Assembling Objects

    A cube is unfolded into a flat net of six squares. Two of the squares in the net touch at only one corner point. When the net is folded back into a cube, how do those two faces meet?

    1. They are opposite faces that never touch
    2. They become the same face
    3. They share a full edge
    4. They touch at one corner only Correct answer.

    Explanation

    Folding preserves which parts of the pattern are in contact. Squares that meet only at a point in the flat net end up sharing only that corner point on the cube, with no shared edge.

  192. Question 192Assembling Objects

    A square sheet is folded in half, then folded in half again, giving four layers. One hole is punched through all four layers at a spot away from every fold. How many holes are in the sheet when it is unfolded?

    1. 2
    2. 8
    3. 1
    4. 4 Correct answer.

    Explanation

    Each punch passes through every layer, and each layer becomes a separate region of the unfolded sheet. Four layers produce four holes, arranged symmetrically about the fold lines.

  193. Question 193Assembling Objects

    A rectangle is cut into two pieces along a straight line, and the pieces are rearranged to form a different shape with no overlap and no gaps. Which quantity is identical for both shapes?

    1. The perimeter
    2. The number of sides
    3. The length of the longest side
    4. The total area Correct answer.

    Explanation

    Rearranging pieces moves them without stretching or removing any material, so the amount of surface covered stays the same. Perimeter, side count, and longest side can all change because the outline changes.

  194. Question 194Assembling Objects

    A joint requires a tab shaped like an isosceles triangle with a 4 cm base and a 3 cm height. Which socket matches it?

    1. A right triangle with legs 3 cm and 4 cm
    2. An isosceles triangle with a 3 cm base and a 4 cm height
    3. An equilateral triangle 4 cm on each side
    4. Isosceles triangle, base 4 cm, height 3 cm Correct answer.

    Explanation

    A matching socket must repeat the tab's outline and its two dimensions. An isosceles triangle with the same base and the same height gives a congruent shape.

  195. Question 195Assembling Objects

    Two identical squares are joined along one full edge to make a single flat piece. How many sides does the outline of the new piece have?

    1. 4 Correct answer.
    2. 6
    3. 8
    4. 7

    Explanation

    The shared edge becomes interior and no longer counts as part of the outline. The remaining boundary is a rectangle, which has four sides.

  196. Question 196Assembling Objects

    A cube has one corner sliced off by a flat cut passing through the midpoints of the three edges that meet at that corner. How many faces does the new solid have?

    1. 7 Correct answer.
    2. 4
    3. 8
    4. 6

    Explanation

    The cut trims three faces but leaves each of them present, so the original six faces all survive. The cut also creates one new triangular face at the corner, for a total of seven.

  197. Question 197Assembling Objects

    Two congruent right triangles with legs 3 cm and 4 cm (hypotenuse 5 cm) are joined along one of their 3 cm legs to form a single triangle. What are the side lengths of the new triangle?

    1. 5 cm, 5 cm, 8 cm Correct answer.
    2. 3 cm, 3 cm, 4 cm
    3. 4 cm, 4 cm, 3 cm
    4. 5 cm, 5 cm, 6 cm

    Explanation

    Joining along the 3 cm leg places the two 4 cm legs end to end, forming an 8 cm base, while the shared 3 cm leg becomes the altitude. The two hypotenuses of 5 cm become the sloping sides, so the triangle measures 5, 5, and 8 cm.

  198. Question 198Assembling Objects

    Two jigsaw pieces must join along edges built from three features: a bump, a straight run, and a notch. Reading left to right, one piece has 2 cm bump, 3 cm straight, 2 cm notch. Which edge will mate with it?

    1. 2 cm bump, 2 cm straight, 3 cm notch
    2. 2 cm bump, 3 cm straight, 2 cm notch
    3. 3 cm bump, 2 cm straight, 3 cm notch
    4. 2 cm notch, 3 cm straight, 2 cm bump Correct answer.

    Explanation

    A mating edge is the complement of the one it meets: each bump must face a notch of the same length, and the lengths must appear in the same order along the joint. Reading in the same direction, the partner edge is therefore notch, straight, bump with lengths 2, 3, 2.

  199. Question 199Assembling Objects

    An irregular piece is taken from a two-part assembly, flipped over like a pancake, and offered back to the same joint. Why may it no longer fit?

    1. Mirroring reverses handedness, so bumps and notches trade places Correct answer.
    2. Flipping changes the angles between its edges
    3. Flipping changes the piece's area
    4. Flipping changes the lengths of its edges

    Explanation

    A flip produces a mirror image, and mirror images cannot be turned into the original by any rotation. Features that stuck out now sit where recesses are needed, so the joint no longer closes.

PiCAT flashcards

32 cards. Read the term and the definition here. The deck at the top of this page is optional.

Photosynthesis equation
Plants use light energy to convert carbon dioxide and water into glucose and oxygen: 6CO₂ + 6H₂O → C₆H₁₂O₆ + 6O₂.
pH scale
A measure of acidity ranging from 0 to 14: values below 7 are acidic, 7 is neutral, and values above 7 are basic or alkaline.
Weight versus mass
Mass is the amount of matter in an object and stays constant; weight is the gravitational force on that mass and changes with gravity.
Arithmetic mean
Add all the values in a data set, then divide the total by how many values there are; the result is the average, or arithmetic mean.
Percent change formula
Percent change equals the new value minus the old value, divided by the old value, then multiplied by 100 to make it a percent.
Distance-rate-time relationship
Distance traveled equals rate (speed) multiplied by time: d = rt. Rearranged, rate = d ÷ t and time = d ÷ r.
Combined work rate
When two workers or machines work together, add their individual rates in jobs per hour, then divide one job by that combined rate.
Root 'spect'
The Latin root spect means to look or see, as in inspect (look into), spectator (one who watches), and perspective (a way of seeing).
Prefix 'bene-'
The prefix bene- means good or well, as in beneficial (producing good), benevolent (wishing good), and benediction (a spoken blessing).
Contrast context clues
Words such as but, although, and however signal a contrast, so an unfamiliar word near them often means the opposite of nearby wording.
Main idea
The central point the author develops throughout a passage; it is broader than any single detail and often stated in the first or last sentence.
Valid inference
A conclusion logically supported by the passage's details but not stated directly; it must not contradict the text or rely on outside assumptions.
Author's purpose
The reason a passage was written, commonly to inform, persuade, entertain, or describe, which shapes the tone and the details chosen.
Pythagorean theorem
In a right triangle, the square of the hypotenuse equals the sum of the squares of the other two sides: a² + b² = c².
Slope formula
The slope of a line through two points is the change in y divided by the change in x: m = (y₂ − y₁) ÷ (x₂ − x₁).
Area of a circle
The area enclosed by a circle equals pi times the radius squared: A = πr². Its circumference is 2πr.
Zero and negative exponents
Any nonzero number raised to the zero power equals 1; a negative exponent gives the reciprocal, so x⁻ⁿ equals 1 ÷ xⁿ.
Ohm's law
Voltage equals current multiplied by resistance: V = IR. If any two of the three values are known, the third can be calculated.
Electrical power formulas
Power in watts equals voltage times current (P = VI); it also equals current squared times resistance (P = I²R).
Parallel circuit resistance
In a parallel circuit the voltage across each branch is equal, and total resistance follows 1/R = 1/R₁ + 1/R₂ and so on.
Diode function
A diode conducts current in only one direction, acting as a one-way valve; an LED is a diode that emits light when forward-biased.
Four-stroke engine cycle
A gasoline engine repeats intake, compression, power, and exhaust strokes; the spark plug fires near the end of compression to start the power stroke.
Alternator purpose
Driven by an engine belt, the alternator generates electricity to recharge the battery and run the vehicle's electrical system while the engine operates.
Engine cooling system
Coolant circulates through the engine and radiator; the thermostat opens at a set temperature to control flow and hold the engine at operating temperature.
Saw teeth per inch
Blades with fewer teeth per inch cut faster and rougher, while blades with more teeth per inch cut slower and leave a smoother finish.
Pilot hole purpose
A small hole drilled before driving a screw or nail; it prevents wood from splitting, guides the fastener, and eases driving near edges.
Sandpaper grit number
Lower grit numbers are coarser and remove material quickly, while higher grit numbers are finer and produce a smooth finish for final sanding.
Lever mechanical advantage
For a lever, mechanical advantage equals effort arm length divided by resistance arm length; a longer effort arm multiplies the applied force.
Movable pulley advantage
A single movable pulley supports the load with two rope segments, giving a mechanical advantage of 2 so half the force lifts the load.
Hydraulic pressure principle
Pressure applied to a confined fluid is transmitted equally in all directions; force equals pressure times area, so a larger piston lifts more.
Mental rotation strategy
Mentally turn the piece in the same direction as the answer choices; rotations keep the part's shape, while mirrored versions are always wrong.
Matching tabs and slots
Locate unique tabs, notches, and slots on each piece and confirm the assembled figure has a matching receiver in the correct position.

PiCAT study guide

General Science

What to know

General Science is a broad survey compressed into a few dozen questions, so breadth beats depth. Review five clusters. Biology: cell parts, prokaryotes versus eukaryotes, photosynthesis and respiration, DNA and simple inheritance, major body systems. Chemistry: atomic structure, the periodic table, states of matter, mixtures versus compounds, acids and bases. Physics: Newton's three laws, speed versus velocity versus acceleration, forms of energy, work and power. Earth science: rock types, the water cycle, plate tectonics, weather fronts. Astronomy: planet order and why seasons occur.

Traps

  • Absolute words. Choices containing always or never are usually wrong because most science statements have exceptions.
  • Near-miss vocabulary: mass versus weight, mitosis versus meiosis, a compound versus a mixture, weathering versus erosion.
  • Reversed reactions. Photosynthesis consumes carbon dioxide and water and releases oxygen; cellular respiration does the opposite.
  • Seasons come from axial tilt, not from distance to the Sun.

Rule of thumb

Density is the calculation to memorize: density = mass ÷ volume. It settles any floating or sinking question without extra theory.

Worked example

A block has a mass of 60 g and a volume of 20 cm³. Density = 60 ÷ 20 = 3 g/cm³. Because that exceeds the 1 g/cm³ of water, the block sinks. If a choice offers 0.33, that is volume ÷ mass, the inverted fraction, and it is a common distractor.

Arithmetic Reasoning

What to know

Arithmetic Reasoning is word problems, not bare computation. The arithmetic is usually easy; the real test is translation. Expect percentages and percent change, ratios and proportions, unit rates, averages, distance = rate × time, work rates, simple interest, and money or measurement conversions. Everything is solvable without a calculator, so correct answers are usually round numbers.

Traps

  • Percent of versus percent change. Percent change is always measured against the original amount, not the new one.
  • Unit mismatch. Minutes hidden inside hours and cents hidden inside dollars cause more wrong answers than any other error.
  • Answering the wrong quantity, such as finding what was used when the question asks what remains.
  • Weighted averages. A group of 10 averaging 80 combined with a group of 30 averaging 90 is not 85.
  • Distractor answers that match a partial step of the problem.

Rule of thumb

Write the units next to every number before computing, and convert first, solve second. If your answer's units do not match the units the question asks for, stop and re-read.

Worked example

A car travels 150 miles in 3 hours. At the same speed, how far does it go in 5 hours? Rate = 150 ÷ 3 = 50 miles per hour. Distance = 50 × 5 = 250 miles. Trap answers include 90 (adding the hours) and 30 (150 ÷ 5). Naming the rate in miles per hour makes the correct operation obvious.

Word Knowledge

What to know

Word Knowledge asks for the closest meaning of a word, either standing alone or inside a short sentence. Tested words range from common to moderately formal, so build three tools. First, word parts: prefixes such as bene- (good), mal- (bad), circum- (around), in- (not), and roots such as aud (hear), cred (believe), dic (speak), fer (carry), lum (light), mit (send). Second, context clues: definition, contrast, example, and cause-and-effect signals. Third, word charge: is the word positive, negative, or neutral?

Traps

  • Near synonyms with the wrong intensity: irritated, angry, and furious are not interchangeable.
  • Familiar words with a second meaning: grave means serious, novel means new, table can mean to postpone.
  • Look-alikes and sound-alikes: eminent versus imminent, compliment versus complement.
  • A choice that matches the topic of the sentence but not the meaning of the target word.

Rule of thumb

Substitute each choice into the sentence and read it back at full speed. If two choices still seem right, pick the one with the same intensity and grammatical form as the original word.

Worked example

Despite his candid remarks, the audience found him refreshing. Candid means open and honest. The distractor harsh fits the tone but not the meaning; frank is exact. Note that despite signals contrast, so the audience's reaction was positive where you might expect offense.

Paragraph Comprehension

What to know

Paragraph Comprehension asks about main idea, supporting details, inference, vocabulary in context, author's purpose, and tone. Passages are short, so nearly every sentence carries weight.

Read the question stem first so you know what to hunt for. Then identify the topic and the sentence that states the point. For inference questions, the right answer is a small, safe step beyond the text, never a leap. For tone, watch adjectives and verbs: a writer who calls a plan costly and rushed is critical, even without saying so.

Traps

  • True but irrelevant. A detail lifted from the passage that does not answer the question asked.
  • Overreach. Choices that draw conclusions the passage never supports.
  • Extreme language. Words such as all, never, only, and proves usually mark a wrong choice.
  • Confusing main idea with best title or with the author's purpose, all of which can be asked.
  • Vocabulary items where the everyday meaning of a word is wrong for this passage.

Rule of thumb

For main idea, apply the cover test: if this sentence were the headline, would it cover the whole passage? If it fits only one paragraph, it is a detail.

Worked example

Recycling programs often fail not because people are unwilling, but because bins are confusing. Clear labels raised participation by a third in one city.

  • Main idea: confusing labels, not unwillingness, limit recycling.
  • Wrong choice: recycling is unpopular. That contradicts the passage.
  • Valid inference: better labeling can raise participation, which follows directly from the cited result.

Mathematics Knowledge

What to know

Mathematics Knowledge is straight math without a story. Expect fractions and decimals, order of operations, exponents and roots, solving equations and inequalities, factoring, systems of equations, and geometry: angles, triangles, circles, perimeter, area, and volume.

Memorize the core formulas: area of a triangle ½bh, circle area πr² and circumference 2πr, rectangle area lw, box volume lwh, triangle angles sum to 180°, Pythagorean theorem a² + b² = c², and slope = rise ÷ run.

Traps

  • Order of operations, especially dividing before subtracting.
  • Distributing a negative: −(x − 3) becomes −x + 3, not −x − 3.
  • Squaring a binomial: (x + 3)² = x² + 6x + 9, never x² + 9.
  • Negative exponents: x⁻² = 1/x².
  • Being handed a diameter when the formula needs a radius.
  • Mixing up perimeter and area, or forgetting to convert units first.

Rule of thumb

Substitute your answer back into the original equation. On multiple choice, you can also plug each answer choice in from the start, which is often faster than solving.

Worked example

Solve 3(x − 4) = 2x + 5. Distribute: 3x − 12 = 2x + 5. Subtract 2x from both sides: x − 12 = 5. Add 12: x = 17. Check: 3(17 − 4) = 39 and 2(17) + 5 = 39. Both sides agree, so 17 is correct.

Electronics Information

What to know

Electronics Information covers how basic circuits and components behave. Voltage is electrical pressure, current is the flow of charge in amperes, and resistance opposes flow in ohms. Ohm's law links them: V = I × R. Power is P = V × I, which also appears as I²R or V²/R.

Series circuits have one path: current is the same everywhere, voltages add, and resistances add. Parallel circuits give each branch the full source voltage: branch currents add, and total resistance is smaller than the smallest branch.

Know the parts: resistor limits current, capacitor stores charge and blocks DC, inductor stores energy in a magnetic field, diode is a one-way valve, transistor switches or amplifies. Also review AC versus DC, conductors versus insulators, and the resistor color order: black 0, brown 1, red 2, orange 3, yellow 4, green 5, blue 6, violet 7, gray 8, white 9.

Traps

  • Swapping current and voltage in a definition.
  • Adding resistances in a parallel circuit, or forgetting to invert after summing reciprocals.
  • Mixing milliamps and amps; 250 mA is 0.25 A.

Rule of thumb

An open path means no current at all. Check continuity before you calculate anything.

Worked example

A 12-volt source drives a 4-ohm resistor. I = V ÷ R = 12 ÷ 4 = 3 A. Power P = V × I = 12 × 3 = 36 W. Put a second 4-ohm resistor in series and total resistance is 8 ohms, so current drops to 1.5 A and total power to 18 W.

Auto Information

What to know

Auto Information tests how a car works and how to keep it running. The centerpiece is the four-stroke cycle: intake (air and fuel enter), compression (the piston squeezes the mixture), power (the spark ignites it and drives the piston down), and exhaust (gases leave).

Know the major systems: fuel and air intake, ignition, cooling (radiator, thermostat, water pump, coolant), lubrication (oil pump, oil filter), exhaust, electrical (battery, starter, alternator), brakes (disc and drum), steering and suspension, and drivetrain (clutch or torque converter, transmission, differential).

Routine maintenance facts appear often: check tire pressure cold, rotate tires, change oil and filter on schedule, replace brake pads before metal contacts metal, and never open a hot radiator.

Traps

  • Confusing the battery's job (storing charge, cranking) with the alternator's (charging while the engine runs).
  • Mixing up coolant and oil functions. Coolant carries heat away; oil lubricates and also helps cool moving parts.
  • Assuming a car that cranks but will not start has a dead battery. Cranking proves the battery and starter work.

Rule of thumb

Diagnose by symptom. No crank points to battery, cables, or starter; a single click points to the solenoid or connections; cranking without firing points to fuel, spark, or timing.

Worked example

An engine overheats after ten minutes of driving. Coolant is low and the upper radiator hose stays cold. A cold upper hose suggests a thermostat stuck closed, blocking coolant flow to the radiator. Topping off coolant without replacing the thermostat only repeats the failure.

Shop Information

What to know

Shop Information covers tools, materials, fasteners, and safe practice. For measuring: tape measure, steel rule, try square, combination square, caliper. For cutting: crosscut saw for cutting across the grain, rip saw for cutting with the grain, hacksaw for metal, chisel for joinery. For drilling and driving: drill bits, pilot holes, countersinking, and screwdrivers matched to the screw head. For fastening: nails hold by friction and shear, screws hold by their threads and can be removed, and bolts with washers clamp materials together.

Materials matter too: hardwood versus softwood, plywood's alternating grain layers for strength, MDF for smooth painted surfaces, and ferrous versus nonferrous metals.

Traps

  • Using the wrong tool: a screwdriver as a chisel, pliers as a wrench, or a wood saw on metal.
  • Choosing a nail for a joint that later has to come apart.
  • Ignoring grain direction when planning a cut.
  • Safety details: unplug before changing a blade, clamp the work, and keep blades sharp, because dull blades cause more injuries than sharp ones.

Rule of thumb

Drill a pilot hole slightly narrower than the screw shank before driving a screw near the end of a board. It prevents splitting and produces a straighter drive.

Worked example

You must join two pine boards that may later be disassembled. Nails tear the wood on removal and glue is permanent, so use wood screws with pilot holes. If the head must sit flush, countersink first, then drive the screw.

Mechanical Comprehension

What to know

Mechanical Comprehension asks how forces, motion, and simple machines behave. Master mechanical advantage, levers, pulleys, gears, inclined planes, torque, pressure, and friction.

Levers. First class: fulcrum between effort and load (seesaw). Second class: load between fulcrum and effort (wheelbarrow). Third class: effort between fulcrum and load (tweezers). Mechanical advantage equals effort arm divided by load arm.

Pulleys. A fixed pulley only changes direction. A movable pulley halves the effort, and advantage equals the number of rope segments supporting the load.

Gears. Meshing gears turn in opposite directions. The larger gear turns more slowly and delivers more torque. Gear ratio equals driven teeth divided by driving teeth.

Pressure equals force divided by area, so a narrow tip concentrates force. Torque equals force times distance from the pivot.

Traps

  • Counting pulleys instead of the rope strands supporting the load.
  • Forgetting that meshing gears reverse direction.
  • Assuming a longer lever needs more force; it needs less.
  • Mixing torque with pressure, or force with work.

Rule of thumb

For any machine, compare the distance the effort moves with the distance the load moves. Whatever you gain in force, you pay back in distance.

Worked example

A lever has a 2 m effort arm and a 0.5 m load arm. Mechanical advantage = 2 ÷ 0.5 = 4. A 50 N push lifts a 200 N load, but the effort end must travel four times as far as the load rises.

Assembling Objects

What to know

Assembling Objects tests spatial visualization, not shop knowledge. Two formats dominate: choosing which pieces will join to form a target shape, and choosing which completed figure results when the given pieces are rotated and connected. Pieces are drawn in different orientations, so you must rotate them mentally.

Method: find a distinctive feature on each piece, such as an angled cut, notch, tab, hole, or curved edge, and match it to the target. Work one connection at a time, and eliminate a choice the moment a feature fails to line up.

Traps

  • Mirror images. A piece that looks rotated but is actually flipped is almost always wrong. Rotation preserves the arrangement of features; reflection reverses it.
  • Pieces that differ in size or proportion from the target.
  • Overlapping parts drawn so they appear to share a single edge.
  • Pieces that fit individually but overlap or leave a gap once joined.

Rule of thumb

Track one landmark, such as the corner with the notch, and follow where it lands after rotation. If the notch ends up on the wrong side of the joined figure, the choice is a reflection and must be rejected.

Worked example

An L-shaped bracket has a hole near the inside corner, but the target shows the hole at the outside. Any choice that keeps the hole near the inside corner is a mirror image, so discard it. The correct answer is the version rotated 180 degrees, which moves the hole to the outside while preserving the shape.

PiCAT cheat sheet

Quick reference

General Science

  • Water boils at 100 °C (212 °F) and freezes at 0 °C (32 °F) at standard atmospheric pressure.

  • Photosynthesis: 6CO₂ + 6H₂O + light energy → C₆H₁₂O₆ + 6O₂, occurring in chloroplasts with the aid of chlorophyll.

  • Force = mass × acceleration (F = ma); weight = mass × gravitational acceleration (W = mg).

  • Earth's atmosphere is about 78% nitrogen, 21% oxygen, and 1% argon, carbon dioxide, and other gases.

  • pH below 7 is acidic, pH 7 is neutral, and pH above 7 is basic (alkaline).

  • The speed of light in a vacuum is about 3 × 10⁸ meters per second.

  • Density = mass ÷ volume; an object denser than a fluid sinks in it, and one less dense floats.

  • Newton's third law: for every action force there is an equal and opposite reaction force.

Quick reference

Arithmetic Reasoning

  • Average = sum of all values ÷ number of values.

  • Percent change = (new value − old value) ÷ old value × 100.

  • Distance = rate × time; rate = distance ÷ time; time = distance ÷ rate.

  • Part = percent × whole, with the percent converted to a decimal (35% of 80 = 0.35 × 80 = 28).

  • Simple interest = principal × annual rate × time in years.

  • Combined work rate = sum of the individual rates; time working together = 1 ÷ combined rate.

  • To convert units, multiply by a fraction equal to 1 that places the desired unit on top so unwanted units cancel.

  • Profit = revenue − cost; total cost = unit price × quantity plus any fixed fees.

Quick reference

Word Knowledge

  • Prefixes: un-/dis-/non- (not), re- (again), pre- (before), post- (after), sub- (under), inter- (between), anti- (against).

  • Common roots: -spect- (look), -dict- (say), -ject- (throw), -port- (carry), -cred- (believe), -bene- (good), -mal- (bad).

  • Suffixes: -tion and -ment form nouns; -ous, -ful, and -ive form adjectives; -ize and -ify form verbs; -ly forms adverbs.

  • Contrast signals such as but, although, however, and unlike often mean the answer is the opposite of a nearby word.

  • Definition clues follow dashes, commas, or phrases such as "that is" and "in other words."

  • A positive connotation suggests approval and a negative connotation suggests disapproval, even when literal meanings are similar.

  • On antonym questions, eliminate any choice that means the same as the stem word before selecting.

Quick reference

Paragraph Comprehension

  • The main idea is the point the whole passage supports; it is broader than any single detail but narrower than the topic alone.

  • Topic sentences most often appear as the first or last sentence of a paragraph.

  • Detail questions are answered by locating the exact sentence; the correct choice restates it without adding claims.

  • A valid inference follows logically from stated details and requires no outside information.

  • Signal words: first, next, then, finally indicate sequence; because, therefore, as a result indicate cause and effect.

  • Tone words classify an author's attitude as positive, negative, or neutral (for example critical, admiring, objective).

  • Eliminate choices that are too broad, too narrow, or absolute (always, never, all) when the passage qualifies its claim.

Quick reference

Mathematics Knowledge

  • Triangle area = ½ × base × height; circle area = πr²; circumference = 2πr.

  • Pythagorean theorem: a² + b² = c², where c is the hypotenuse of a right triangle.

  • Slope m = (y₂ − y₁)/(x₂ − x₁); slope-intercept form is y = mx + b.

  • Quadratic formula: x = [−b ± √(b² − 4ac)] ÷ 2a for ax² + bx + c = 0.

  • Exponent rules: xᵃ·xᵇ = xᵃ⁺ᵇ; (xᵃ)ᵇ = xᵃᵇ; x⁰ = 1; x⁻ᵃ = 1/xᵃ.

  • Angles in a triangle sum to 180°, in a quadrilateral to 360°, and on a straight line to 180°.

  • Volume: rectangular solid V = lwh; cylinder V = πr²h; cube V = s³.

  • FOIL: (x + a)(x + b) = x² + (a + b)x + ab; (a + b)² = a² + 2ab + b².

  • Median is the middle value of ordered data; mode is the value that appears most often.

Quick reference

Electronics Information

  • Ohm's law: V = IR, where V is volts, I is amperes, and R is ohms.

  • Power: P = VI = I²R = V²/R, measured in watts.

  • Series circuit: R_total = R₁ + R₂ + …; current is the same through every component and voltages add.

  • Parallel circuit: 1/R_total = 1/R₁ + 1/R₂ + …; voltage is the same across each branch and branch currents add.

  • Resistor color digits: black 0, brown 1, red 2, orange 3, yellow 4, green 5, blue 6, violet 7, gray 8, white 9.

  • A capacitor (farads) stores charge and opposes changes in voltage; an inductor (henries) opposes changes in current.

  • A diode conducts in one direction only; a transistor can amplify a signal or act as an electronic switch.

  • Copper and silver are good conductors, while rubber, glass, and plastic are insulators.

Quick reference

Auto Information

  • Four-stroke cycle order: intake, compression, power, exhaust.

  • Most passenger vehicles use a 12-volt battery with the negative terminal connected to the chassis (negative ground).

  • The alternator recharges the battery and supplies electrical power while the engine runs; the starter cranks the engine.

  • The cooling system circulates coolant through the engine and radiator, and the thermostat controls flow to regulate temperature.

  • Engine oil lubricates moving parts, carries away heat, and suspends contaminants; the oil filter traps particles.

  • Brakes are hydraulic: pedal pressure pressurizes brake fluid, which pushes calipers or wheel cylinders against rotors or drums.

  • Check tire pressure when tires are cold; pressure is measured in psi and specified on the vehicle placard.

Quick reference

Shop Information

  • Wear safety glasses for cutting, drilling, and chipping, and keep guards in place on power tools.

  • Lower sandpaper grit numbers are coarser and remove material fast; higher numbers are finer and produce a smooth finish.

  • Saw blades with fewer teeth per inch cut faster and rougher; more teeth per inch cut slower and smoother.

  • Drill a pilot hole smaller than the screw shank to prevent splitting and to guide fasteners near board edges.

  • Screws hold better than nails in wood and can be removed; nails rely on friction and drive faster.

  • A combination square checks 90° and 45° angles; calipers measure inside, outside, and depth dimensions precisely.

  • Cut wood along the grain with a ripsaw and across the grain with a crosscut saw; use a fine-tooth hacksaw for metal.

Quick reference

Mechanical Comprehension

  • Lever mechanical advantage = effort arm length ÷ resistance arm length.

  • A single fixed pulley changes direction only (MA = 1); a single movable pulley has a mechanical advantage of 2.

  • Inclined plane mechanical advantage = length of the incline ÷ height of the incline.

  • Gear ratio = teeth on driven gear ÷ teeth on driving gear; a larger driven gear turns slower with greater torque.

  • Work = force × distance; power = work ÷ time.

  • Efficiency = (useful output work ÷ total input work) × 100%.

  • In hydraulics, pressure = force ÷ area and is transmitted equally in all directions (Pascal's principle).

  • Torque = force × perpendicular distance from the pivot; friction increases with rougher surfaces and greater normal force.

Quick reference

Assembling Objects

  • A rotation preserves the shape of a piece; a mirror image cannot be rotated into a match, so reject reflected options.

  • Identify unique features such as tabs, slots, holes, and notches, then trace where each must connect in the assembled figure.

  • Anchor on the piece that appears unchanged in the answer choices, then position the remaining pieces relative to it.

  • Match line lengths and joint angles; a mismatched angle rules out that choice.

  • Count the pieces: an option showing more or fewer pieces than given is incorrect.

  • Reject options in which parts overlap or occupy space the original pieces cannot share.

Quick reference

General Science

  • Water boils at 100 °C (212 °F) and freezes at 0 °C (32 °F) at standard atmospheric pressure.

  • Photosynthesis: 6CO₂ + 6H₂O + light energy → C₆H₁₂O₆ + 6O₂, occurring in chloroplasts with the aid of chlorophyll.

  • Force = mass × acceleration (F = ma); weight = mass × gravitational acceleration (W = mg).

  • Earth's atmosphere is about 78% nitrogen, 21% oxygen, and 1% argon, carbon dioxide, and other gases.

  • pH below 7 is acidic, pH 7 is neutral, and pH above 7 is basic (alkaline).

  • The speed of light in a vacuum is about 3 × 10⁸ meters per second.

  • Density = mass ÷ volume; an object denser than a fluid sinks in it, and one less dense floats.

  • Newton's third law: for every action force there is an equal and opposite reaction force.

Quick reference

Arithmetic Reasoning

  • Average = sum of all values ÷ number of values.

  • Percent change = (new value − old value) ÷ old value × 100.

  • Distance = rate × time; rate = distance ÷ time; time = distance ÷ rate.

  • Part = percent × whole, with the percent converted to a decimal (35% of 80 = 0.35 × 80 = 28).

  • Simple interest = principal × annual rate × time in years.

  • Combined work rate = sum of the individual rates; time working together = 1 ÷ combined rate.

  • To convert units, multiply by a fraction equal to 1 that places the desired unit on top so unwanted units cancel.

  • Profit = revenue − cost; total cost = unit price × quantity plus any fixed fees.

Quick reference

Word Knowledge

  • Prefixes: un-/dis-/non- (not), re- (again), pre- (before), post- (after), sub- (under), inter- (between), anti- (against).

  • Common roots: -spect- (look), -dict- (say), -ject- (throw), -port- (carry), -cred- (believe), -bene- (good), -mal- (bad).

  • Suffixes: -tion and -ment form nouns; -ous, -ful, and -ive form adjectives; -ize and -ify form verbs; -ly forms adverbs.

  • Contrast signals such as but, although, however, and unlike often mean the answer is the opposite of a nearby word.

  • Definition clues follow dashes, commas, or phrases such as "that is" and "in other words."

  • A positive connotation suggests approval and a negative connotation suggests disapproval, even when literal meanings are similar.

  • On antonym questions, eliminate any choice that means the same as the stem word before selecting.

Quick reference

Paragraph Comprehension

  • The main idea is the point the whole passage supports; it is broader than any single detail but narrower than the topic alone.

  • Topic sentences most often appear as the first or last sentence of a paragraph.

  • Detail questions are answered by locating the exact sentence; the correct choice restates it without adding claims.

  • A valid inference follows logically from stated details and requires no outside information.

  • Signal words: first, next, then, finally indicate sequence; because, therefore, as a result indicate cause and effect.

  • Tone words classify an author's attitude as positive, negative, or neutral (for example critical, admiring, objective).

  • Eliminate choices that are too broad, too narrow, or absolute (always, never, all) when the passage qualifies its claim.

Quick reference

Mathematics Knowledge

  • Triangle area = ½ × base × height; circle area = πr²; circumference = 2πr.

  • Pythagorean theorem: a² + b² = c², where c is the hypotenuse of a right triangle.

  • Slope m = (y₂ − y₁)/(x₂ − x₁); slope-intercept form is y = mx + b.

  • Quadratic formula: x = [−b ± √(b² − 4ac)] ÷ 2a for ax² + bx + c = 0.

  • Exponent rules: xᵃ·xᵇ = xᵃ⁺ᵇ; (xᵃ)ᵇ = xᵃᵇ; x⁰ = 1; x⁻ᵃ = 1/xᵃ.

  • Angles in a triangle sum to 180°, in a quadrilateral to 360°, and on a straight line to 180°.

  • Volume: rectangular solid V = lwh; cylinder V = πr²h; cube V = s³.

  • FOIL: (x + a)(x + b) = x² + (a + b)x + ab; (a + b)² = a² + 2ab + b².

  • Median is the middle value of ordered data; mode is the value that appears most often.

Quick reference

Electronics Information

  • Ohm's law: V = IR, where V is volts, I is amperes, and R is ohms.

  • Power: P = VI = I²R = V²/R, measured in watts.

  • Series circuit: R_total = R₁ + R₂ + …; current is the same through every component and voltages add.

  • Parallel circuit: 1/R_total = 1/R₁ + 1/R₂ + …; voltage is the same across each branch and branch currents add.

  • Resistor color digits: black 0, brown 1, red 2, orange 3, yellow 4, green 5, blue 6, violet 7, gray 8, white 9.

  • A capacitor (farads) stores charge and opposes changes in voltage; an inductor (henries) opposes changes in current.

  • A diode conducts in one direction only; a transistor can amplify a signal or act as an electronic switch.

  • Copper and silver are good conductors, while rubber, glass, and plastic are insulators.

Quick reference

Auto Information

  • Four-stroke cycle order: intake, compression, power, exhaust.

  • Most passenger vehicles use a 12-volt battery with the negative terminal connected to the chassis (negative ground).

  • The alternator recharges the battery and supplies electrical power while the engine runs; the starter cranks the engine.

  • The cooling system circulates coolant through the engine and radiator, and the thermostat controls flow to regulate temperature.

  • Engine oil lubricates moving parts, carries away heat, and suspends contaminants; the oil filter traps particles.

  • Brakes are hydraulic: pedal pressure pressurizes brake fluid, which pushes calipers or wheel cylinders against rotors or drums.

  • Check tire pressure when tires are cold; pressure is measured in psi and specified on the vehicle placard.

Quick reference

Shop Information

  • Wear safety glasses for cutting, drilling, and chipping, and keep guards in place on power tools.

  • Lower sandpaper grit numbers are coarser and remove material fast; higher numbers are finer and produce a smooth finish.

  • Saw blades with fewer teeth per inch cut faster and rougher; more teeth per inch cut slower and smoother.

  • Drill a pilot hole smaller than the screw shank to prevent splitting and to guide fasteners near board edges.

  • Screws hold better than nails in wood and can be removed; nails rely on friction and drive faster.

  • A combination square checks 90° and 45° angles; calipers measure inside, outside, and depth dimensions precisely.

  • Cut wood along the grain with a ripsaw and across the grain with a crosscut saw; use a fine-tooth hacksaw for metal.

Quick reference

Mechanical Comprehension

  • Lever mechanical advantage = effort arm length ÷ resistance arm length.

  • A single fixed pulley changes direction only (MA = 1); a single movable pulley has a mechanical advantage of 2.

  • Inclined plane mechanical advantage = length of the incline ÷ height of the incline.

  • Gear ratio = teeth on driven gear ÷ teeth on driving gear; a larger driven gear turns slower with greater torque.

  • Work = force × distance; power = work ÷ time.

  • Efficiency = (useful output work ÷ total input work) × 100%.

  • In hydraulics, pressure = force ÷ area and is transmitted equally in all directions (Pascal's principle).

  • Torque = force × perpendicular distance from the pivot; friction increases with rougher surfaces and greater normal force.

Quick reference

Assembling Objects

  • A rotation preserves the shape of a piece; a mirror image cannot be rotated into a match, so reject reflected options.

  • Identify unique features such as tabs, slots, holes, and notches, then trace where each must connect in the assembled figure.

  • Anchor on the piece that appears unchanged in the answer choices, then position the remaining pieces relative to it.

  • Match line lengths and joint angles; a mismatched angle rules out that choice.

  • Count the pieces: an option showing more or fewer pieces than given is incorrect.

  • Reject options in which parts overlap or occupy space the original pieces cannot share.

Quick reference

General Science

  • Water boils at 100 °C (212 °F) and freezes at 0 °C (32 °F) at standard atmospheric pressure.

  • Photosynthesis: 6CO₂ + 6H₂O + light energy → C₆H₁₂O₆ + 6O₂, occurring in chloroplasts with the aid of chlorophyll.

  • Force = mass × acceleration (F = ma); weight = mass × gravitational acceleration (W = mg).

  • Earth's atmosphere is about 78% nitrogen, 21% oxygen, and 1% argon, carbon dioxide, and other gases.

  • pH below 7 is acidic, pH 7 is neutral, and pH above 7 is basic (alkaline).

  • The speed of light in a vacuum is about 3 × 10⁸ meters per second.

  • Density = mass ÷ volume; an object denser than a fluid sinks in it, and one less dense floats.

  • Newton's third law: for every action force there is an equal and opposite reaction force.

Quick reference

Arithmetic Reasoning

  • Average = sum of all values ÷ number of values.

  • Percent change = (new value − old value) ÷ old value × 100.

  • Distance = rate × time; rate = distance ÷ time; time = distance ÷ rate.

  • Part = percent × whole, with the percent converted to a decimal (35% of 80 = 0.35 × 80 = 28).

  • Simple interest = principal × annual rate × time in years.

  • Combined work rate = sum of the individual rates; time working together = 1 ÷ combined rate.

  • To convert units, multiply by a fraction equal to 1 that places the desired unit on top so unwanted units cancel.

  • Profit = revenue − cost; total cost = unit price × quantity plus any fixed fees.

Quick reference

Word Knowledge

  • Prefixes: un-/dis-/non- (not), re- (again), pre- (before), post- (after), sub- (under), inter- (between), anti- (against).

  • Common roots: -spect- (look), -dict- (say), -ject- (throw), -port- (carry), -cred- (believe), -bene- (good), -mal- (bad).

  • Suffixes: -tion and -ment form nouns; -ous, -ful, and -ive form adjectives; -ize and -ify form verbs; -ly forms adverbs.

  • Contrast signals such as but, although, however, and unlike often mean the answer is the opposite of a nearby word.

  • Definition clues follow dashes, commas, or phrases such as "that is" and "in other words."

  • A positive connotation suggests approval and a negative connotation suggests disapproval, even when literal meanings are similar.

  • On antonym questions, eliminate any choice that means the same as the stem word before selecting.

Quick reference

Paragraph Comprehension

  • The main idea is the point the whole passage supports; it is broader than any single detail but narrower than the topic alone.

  • Topic sentences most often appear as the first or last sentence of a paragraph.

  • Detail questions are answered by locating the exact sentence; the correct choice restates it without adding claims.

  • A valid inference follows logically from stated details and requires no outside information.

  • Signal words: first, next, then, finally indicate sequence; because, therefore, as a result indicate cause and effect.

  • Tone words classify an author's attitude as positive, negative, or neutral (for example critical, admiring, objective).

  • Eliminate choices that are too broad, too narrow, or absolute (always, never, all) when the passage qualifies its claim.

Quick reference

Mathematics Knowledge

  • Triangle area = ½ × base × height; circle area = πr²; circumference = 2πr.

  • Pythagorean theorem: a² + b² = c², where c is the hypotenuse of a right triangle.

  • Slope m = (y₂ − y₁)/(x₂ − x₁); slope-intercept form is y = mx + b.

  • Quadratic formula: x = [−b ± √(b² − 4ac)] ÷ 2a for ax² + bx + c = 0.

  • Exponent rules: xᵃ·xᵇ = xᵃ⁺ᵇ; (xᵃ)ᵇ = xᵃᵇ; x⁰ = 1; x⁻ᵃ = 1/xᵃ.

  • Angles in a triangle sum to 180°, in a quadrilateral to 360°, and on a straight line to 180°.

  • Volume: rectangular solid V = lwh; cylinder V = πr²h; cube V = s³.

  • FOIL: (x + a)(x + b) = x² + (a + b)x + ab; (a + b)² = a² + 2ab + b².

  • Median is the middle value of ordered data; mode is the value that appears most often.

Quick reference

Electronics Information

  • Ohm's law: V = IR, where V is volts, I is amperes, and R is ohms.

  • Power: P = VI = I²R = V²/R, measured in watts.

  • Series circuit: R_total = R₁ + R₂ + …; current is the same through every component and voltages add.

  • Parallel circuit: 1/R_total = 1/R₁ + 1/R₂ + …; voltage is the same across each branch and branch currents add.

  • Resistor color digits: black 0, brown 1, red 2, orange 3, yellow 4, green 5, blue 6, violet 7, gray 8, white 9.

  • A capacitor (farads) stores charge and opposes changes in voltage; an inductor (henries) opposes changes in current.

  • A diode conducts in one direction only; a transistor can amplify a signal or act as an electronic switch.

  • Copper and silver are good conductors, while rubber, glass, and plastic are insulators.

Quick reference

Auto Information

  • Four-stroke cycle order: intake, compression, power, exhaust.

  • Most passenger vehicles use a 12-volt battery with the negative terminal connected to the chassis (negative ground).

  • The alternator recharges the battery and supplies electrical power while the engine runs; the starter cranks the engine.

  • The cooling system circulates coolant through the engine and radiator, and the thermostat controls flow to regulate temperature.

  • Engine oil lubricates moving parts, carries away heat, and suspends contaminants; the oil filter traps particles.

  • Brakes are hydraulic: pedal pressure pressurizes brake fluid, which pushes calipers or wheel cylinders against rotors or drums.

  • Check tire pressure when tires are cold; pressure is measured in psi and specified on the vehicle placard.

Quick reference

Shop Information

  • Wear safety glasses for cutting, drilling, and chipping, and keep guards in place on power tools.

  • Lower sandpaper grit numbers are coarser and remove material fast; higher numbers are finer and produce a smooth finish.

  • Saw blades with fewer teeth per inch cut faster and rougher; more teeth per inch cut slower and smoother.

  • Drill a pilot hole smaller than the screw shank to prevent splitting and to guide fasteners near board edges.

  • Screws hold better than nails in wood and can be removed; nails rely on friction and drive faster.

  • A combination square checks 90° and 45° angles; calipers measure inside, outside, and depth dimensions precisely.

  • Cut wood along the grain with a ripsaw and across the grain with a crosscut saw; use a fine-tooth hacksaw for metal.

Quick reference

Mechanical Comprehension

  • Lever mechanical advantage = effort arm length ÷ resistance arm length.

  • A single fixed pulley changes direction only (MA = 1); a single movable pulley has a mechanical advantage of 2.

  • Inclined plane mechanical advantage = length of the incline ÷ height of the incline.

  • Gear ratio = teeth on driven gear ÷ teeth on driving gear; a larger driven gear turns slower with greater torque.

  • Work = force × distance; power = work ÷ time.

  • Efficiency = (useful output work ÷ total input work) × 100%.

  • In hydraulics, pressure = force ÷ area and is transmitted equally in all directions (Pascal's principle).

  • Torque = force × perpendicular distance from the pivot; friction increases with rougher surfaces and greater normal force.

Quick reference

Assembling Objects

  • A rotation preserves the shape of a piece; a mirror image cannot be rotated into a match, so reject reflected options.

  • Identify unique features such as tabs, slots, holes, and notches, then trace where each must connect in the assembled figure.

  • Anchor on the piece that appears unchanged in the answer choices, then position the remaining pieces relative to it.

  • Match line lengths and joint angles; a mismatched angle rules out that choice.

  • Count the pieces: an option showing more or fewer pieces than given is incorrect.

  • Reject options in which parts overlap or occupy space the original pieces cannot share.

PiCAT key terms

photosynthesis

The process by which green plants use sunlight, water, and carbon dioxide to make sugar and release oxygen. Chlorophyll in the leaves captures the light energy that drives the reaction.

Related: ecosystem
density

How much mass is packed into a given volume of a material, usually calculated as mass divided by volume. A dense object feels heavy for its size and tends to sink in water.

ecosystem

A community of living things together with the nonliving surroundings they depend on, such as soil, water, and climate. Organisms in it interact through food chains and natural cycles.

Related: photosynthesis
evaporation

The change of a liquid into a gas at its surface, which happens faster when the liquid is warm or exposed to moving air. It is one stage of the water cycle.

percentage

A number expressed as a part of 100. To find a percentage of a quantity, change the percent to a decimal and multiply, so 25% of 80 is 0.25 times 80.

Related: ratio
ratio

A comparison of two quantities by division, often written as a fraction or with a colon. A ratio of 3 to 4 means three parts of the first amount for every four of the second.

Related: percentage, unit rate
mean

The average found by adding all the values in a set and dividing by how many values there are. It is pulled up or down by unusually large or small numbers.

unit rate

A rate in which the second quantity is one unit, such as miles per one hour or dollars per one pound. It makes comparisons easy because everything is measured against a single unit.

Related: ratio
synonym

A word that has the same or nearly the same meaning as another word, such as quick and fast. Synonym questions ask you to choose the answer closest in meaning to the given word.

Related: antonym
antonym

A word that means the opposite of another word, such as hot and cold. Antonym questions ask you to choose the answer that reverses the meaning of the given word.

Related: synonym
prefix

A word part attached to the front of a root word that changes its meaning, such as un- in unhappy or pre- in preview. Knowing common prefixes helps you decode unfamiliar words.

Related: context clue
context clue

A hint about a word's meaning that comes from the other words and sentences around it. Examples include definitions, examples, contrasts, and cause-and-effect statements in the passage.

Related: prefix
main idea

The central point that a paragraph or passage is about, usually stated or hinted at in a single sentence. Every other sentence should support or explain it.

Related: supporting detail
inference

A conclusion you reach by combining information in the passage with what you already know, even though the writer does not state it directly. Inferences must be supported by the text.

Related: main idea
supporting detail

A fact, example, or reason a writer includes to explain or prove the main idea. Details answer questions such as who, what, when, where, and why.

Related: main idea
prime number

A whole number greater than 1 whose only factors are 1 and itself, such as 2, 3, 5, 7, and 11. Numbers with more factors, like 12, are called composite.

variable

A letter or symbol that stands for an unknown or changing number in an expression or equation. Solving an equation usually means finding the value of the variable.

Related: exponent
exponent

A small number written above and to the right of a base that tells how many times the base is multiplied by itself. In 3 squared, the exponent 2 means 3 times 3.

Related: variable
perimeter

The total distance around the outside of a flat shape, found by adding the lengths of all its sides. For a rectangle it is twice the length plus twice the width.

Pythagorean theorem

The rule that in a right triangle the square of the hypotenuse equals the sum of the squares of the other two sides, written a squared plus b squared equals c squared. It finds a missing side.

Related: exponent
voltage

The electrical pressure that pushes charges through a circuit, measured in volts. A higher voltage can push more current through the same amount of resistance.

Related: current, resistance
current

The flow of electric charge through a conductor, measured in amperes. It is what actually does work in a circuit, such as lighting a bulb or turning a motor.

Related: voltage, resistance
resistance

The opposition to the flow of electric current, measured in ohms. More resistance means less current for a given voltage, and some electrical energy is converted into heat.

Related: current, voltage
series circuit

A circuit in which all parts are connected in a single path, so the same current flows through every component. If one part breaks, the whole circuit stops working.

Related: current
combustion

The burning of a fuel with oxygen to release heat and gases, which is what happens inside an engine cylinder. In a car engine, gasoline vapor mixed with air is ignited by the spark plug.

transmission

The gearbox and related parts that send power from the engine to the wheels at a suitable speed and force for driving conditions. It lets the engine run efficiently at different road speeds.

alternator

A belt-driven device that turns the engine's rotation into electricity to charge the battery and run the car's electrical systems while the engine is running.

radiator

A set of tubes and fins that releases engine heat into the air, cooling the liquid coolant that circulates through the engine. It is the main part of a car's cooling system.

caliper

A measuring tool with two adjustable jaws used to measure the inside, outside, or depth of an object. Many calipers have a scale or dial read to a fraction of an inch or a millimeter.

drill bit

A cutting tool with flutes and a pointed tip that is turned by a drill to make round holes in wood, metal, or plastic. Its size and material must match the work.

torque wrench

A wrench that measures and limits how much twisting force is applied to a fastener, so bolts are tightened to a specified tightness without being overstressed or stripped.

kerf

The narrow slot of material removed by a saw blade as it cuts. It makes the cut slightly wider than the blade and must be allowed for when cutting to a marked line.

lever

A rigid bar that turns on a fixed point to lift or move a load. A small force applied far from the pivot can balance a large load placed close to it.

Related: fulcrum, mechanical advantage
fulcrum

The fixed point or pivot on which a lever turns. Moving the fulcrum changes the balance of force and distance, and therefore changes the lever's mechanical advantage.

Related: lever
pulley

A wheel with a grooved rim and a rope or belt running over it, used to change the direction of a pull or to lift heavy loads with less effort. Several pulleys increase the advantage.

Related: mechanical advantage
mechanical advantage

The number of times a machine multiplies the effort force you put in. A machine with an advantage of 4 lets you lift a load with about one quarter of the force.

Related: lever, pulley
rotation

A turning of a figure or object around a point or axis. In assembly questions, a rotated part keeps its shape and proportions but faces a different direction.

Related: mirror image
mirror image

A reversed copy of a shape, as if seen in a mirror, where left and right are swapped. A mirrored part cannot be turned into the original by rotation alone.

Related: rotation
exploded view

A drawing that shows the parts of an object pulled apart along their assembly lines, so you can see how they fit together and in what order they go.

Related: rotation

PiCAT study plan

8 weeks · About 7 hours per week

Week 1

Arithmetic Reasoning & Mathematics Knowledge

  • Solve 100 arithmetic word problems covering percentages, ratios, unit rates, and averages, pacing at 75 seconds per item by week's end

  • Convert 40 fraction-decimal-percent triples without a calculator until you clear 90% accuracy on a timed set

  • Compute perimeter, area, circumference, and volume for 30 mixed figures from memory, writing the formula before each answer

  • Set up and solve 25 one- and two-step equations, showing the inverse operation on every line

Your checkpoint

A scored, timed 30-question arithmetic-and-math diagnostic with every missed item tagged by error cause (misread, formula, calculation, concept)

Week 2

Mathematics Knowledge & Mechanical Comprehension

  • Solve 40 linear equations and inequalities and graph 10 of them on a number line

  • Apply exponent, square root, and factoring rules to 30 expressions without reference notes

  • Explain in writing how a lever, a pulley system, and an inclined plane trade force for distance, using two worked numeric examples apiece

  • Calculate mechanical advantage and efficiency for 20 simple-machine scenarios and check each against an answer key

  • Define the six classic simple machines from memory and match each to two real-world devices

Your checkpoint

A single-page formula sheet covering algebra rules and simple-machine relationships, self-quizzed cold to 100% recall

Week 3

Mechanical Comprehension & Electronics Information

  • Draw and label five series and five parallel circuits, then compute total resistance, current, and voltage drop for 20 problems

  • State Ohm's law and the power equation verbally and solve 15 items for the unknown variable

  • Decode resistor color bands for 20 resistors and write each value with tolerance

  • Solve 15 gear-train and pulley-ratio problems and verify each with a second method

  • Identify 25 electronic components by symbol and state the function of each

Your checkpoint

A 40-item circuits-and-mechanics problem set completed at 85% or better with worked solutions for every miss

Week 4

Auto Information & Shop Information

  • Label 30 automotive systems and components and state the job of each in one sentence

  • Sequence the four-stroke engine cycle and describe the valve and piston state during each stroke

  • Name 25 hand tools and 10 power tools from descriptions, plus one safety rule for each power tool

  • Match 20 fasteners, thread types, and measuring tools to the job they are used for

  • Distinguish the procedures for measuring with a tape, a caliper, and a micrometer in three short written steps each

Your checkpoint

A tool-and-auto identification quiz scored at 90% or better, with every wrong item re-drilled to a perfect retake

Week 5

General Science & Assembling Objects

  • Define 60 general science terms spanning biology, chemistry, physics, and earth science

  • Summarize cell structure, ecosystems, atomic structure, and the water cycle in one paragraph each, from memory

  • Solve 30 assembling-object problems by naming the rotation or flip applied to each piece

  • Sketch the joined result for 15 two-piece rotation and mirror combinations before checking the answer

  • Recite the metric prefixes and three states of matter conversions without notes

Your checkpoint

A 50-item science-and-assembling-objects quiz scored at 80% or better, with a list of the 10 terms you missed most

Week 6

Word Knowledge & Paragraph Comprehension

  • Learn 100 high-frequency vocabulary words in context sentences and quiz them in four sets of 25

  • Infer meaning for 40 unfamiliar words using prefix, suffix, and root analysis alone

  • Work 20 reading passages, underlining the stated main idea and striking two wrong choices with a written reason before answering

  • Distinguish stated versus implied information in 15 passages by labeling each correct answer S or I

  • Paraphrase 10 short paragraphs in a single sentence each to practice restating rather than copying

Your checkpoint

A 100-word vocabulary log self-tested at 85% plus 20 timed reading passages answered at 80% or better

Week 7

Electronics Information & Mechanical Comprehension

  • Re-solve every item missed in the Week 3 and Week 4 sets and write a one-sentence cause for each fix

  • Complete 30 harder electronics items involving combination circuits and power calculations at 90% or better

  • Complete 25 mixed mechanical-advantage problems covering levers, pulleys, gears, and hydraulics at 90% or better

  • Run the auto-and-shop flashcard deck to zero errors in a single pass

  • Drill 20 questions per day from the two domains you scored lowest on, rotating daily

Your checkpoint

A repair log proving 90% or better mastery on retests of electronics, mechanical comprehension, auto, and shop material

Week 8

General Science & Word Knowledge

  • Complete two full-length timed practice tests under exam conditions and score both

  • Review every miss from both tests and group them into concept, careless, and pacing errors

  • Run 10-minute daily flashcard sprints on science terms and vocabulary to hold retention

  • Rehearse a pacing plan: how many minutes to allot per question block and when to guess and move on

  • Retake one full section per day from your two weakest domains until each clears 80%

Your checkpoint

A final score sheet comparing both full-length practice tests, with a written list of the three habits that cost you the most points

Milestones

Week 2: Clear 75% on a 25-question arithmetic-and-math quiz taken cold and without a calculator

Week 4: Score 75% or better on a 40-question mixed quiz covering arithmetic, math knowledge, mechanical, electronics, auto, and shop

Week 6: Finish a full-length 110-question practice test, record the score, and name your three weakest domains

Week 8: Raise your full-length practice score at least 10 points over the Week 6 baseline and clear 80% in every domain you flagged as weakest

PiCAT exam day

Your checklist

Government-issued photo ID

Bring the exact ID your recruiter or test site specified, such as a driver's license, passport, or state ID. needs_review: confirm accepted ID forms and whether a second form of ID is required.

Appointment confirmation and access instructions

Bring a printed or saved confirmation, your recruiter's name and phone number, and any access code or login instructions. needs_review: confirm whether any access code is time-limited or single-use.

Testing location and arrival time

Confirm the address, building entrance, parking, and reporting time, and plan to arrive early as instructed.

Recruiter contact information

Save your recruiter's phone number so you can report delays, technical problems, or last-minute questions.

Glasses, contacts, or hearing aids if you normally use them

Bring any corrective devices you rely on so testing conditions match how you normally see and hear.

Medications, water, and a snack

Take prescribed medication as directed and bring water or a snack only if permitted. needs_review: confirm the site's food, drink, and medication policy.

Comfortable clothing in layers

Dress comfortably and in layers because testing-room temperatures can vary.

Scratch paper and pencil

If testing at a facility, scratch paper and pencil are usually provided; if testing remotely, confirm what blank materials are allowed. needs_review: confirm whether you may supply your own scratch paper and pencil.

Reliable computer, internet, and quiet room for a remote test

If your test is remote, use a quiet, well-lit space with stable internet, a charged device, and a charger. needs_review: confirm whether your test is remote or in person and what technology requirements apply.

No phone, smartwatch, calculator, notes, or books

Leave these secured or turned off as instructed; do not bring unauthorised aids into the testing area.

Transportation and backup plan

Arrange your ride or transit in advance and identify a backup option in case of traffic or scheduling problems.

Sleep and light review plan

Aim for normal sleep and limit yourself to light review of arithmetic and word knowledge; avoid late-night cramming.

Plan the day

72 hours before

Confirm your appointment date, time, location, reporting instructions, and ID requirements with your recruiter or test provider.

72 hours before

Confirm whether the test is remote or in person and review any technology, login, or materials requirements. needs_review: confirm these details with the provider.

72 hours before

Arrange transportation, identify a backup contact, and gather the items on your checklist.

24 hours before

Pack your ID, confirmation, and any permitted materials; charge devices and test your login or access steps if testing remotely.

24 hours before

Avoid alcohol and late nights, do only light review, set alarms, and confirm your departure plan.

Morning of

Eat a normal breakfast, hydrate, take prescribed medication as directed, dress comfortably, and leave with enough time to arrive early as instructed.

Morning of

Secure your phone and other electronics as instructed, use the restroom before testing, and review any on-screen or proctor instructions carefully.

During the test

Follow all proctor or on-screen instructions, read each question carefully, and use scratch paper only if permitted.

During the test

Take breaks only when offered or authorized, and report any technical problem immediately instead of trying to fix it yourself.

During the test

Remember that the test is adaptive and may not let you skip or return to earlier questions; confirm the navigation rules before you begin. needs_review: confirm answer-review and skipping rules with the provider.

After the test

Ask about score verification and next steps, including whether a confirmation test at a military entrance processing station is required. needs_review: confirm your specific verification requirement with your recruiter.

Rules to check

  • Bring acceptable government-issued photo ID; you may be denied admission without it. needs_review: confirm the exact ID policy with your recruiter or test provider.

  • Do not use phones, smartwatches, calculators, notes, books, or other unauthorised aids; follow all proctor or on-screen instructions.

  • Do not talk, share test content, or copy questions; misconduct or suspected cheating can void your scores.

  • Breaks are generally limited to those offered or authorized by the proctor; raise your hand or use the approved method if you need assistance. needs_review: confirm the break policy for your test setting.

  • The test is adaptive, so question difficulty adjusts to your performance; answer every question and do not expect to return to earlier items unless the system allows it.

  • There is generally no penalty for guessing on ASVAB-family tests, but confirm scoring details with your provider before you begin. needs_review: confirm guessing and scoring rules.

  • Your PiCAT score may need to be verified with a confirmation test at a military entrance processing station; if verification is not completed, you may need to take the full ASVAB. needs_review: confirm your verification requirement with your recruiter.

  • Arrive on time and follow scheduling instructions; late arrival may require rescheduling. needs_review: confirm the late-arrival policy with your provider.

PiCAT FAQ

How many PiCAT practice questions are available?

The practice set has 199 PiCAT questions. Each one includes the choices, the correct answer, and an explanation, and the set is free to read with no signup.

How many PiCAT flashcards are available?

The flashcard set has 32 PiCAT cards. Each card shows the term and its definition.

Which topics does the PiCAT study material cover?

The PiCAT study material has 10 sections, including General Science, Arithmetic Reasoning, and Word Knowledge.

What format facts does the catalog list for the PiCAT exam?

The catalog lists these item types: computerized adaptive, unproctored, and internet-delivered for the PiCAT exam.