ASVAB Practice Test

ASVAB Career Exploration Program (ASVAB CEP)

ASVAB overview

  • 200 practice questions
  • 32 flashcards
  • 8 study guide topics
  • 40 key terms

What you'll study

  • General Science (GS)12.5%
  • Arithmetic Reasoning (AR)12.5%
  • Word Knowledge (WK)12.5%
  • Paragraph Comprehension (PC)12.5%
  • Mathematics Knowledge (MK)12.5%
  • Electronics Information (EI)12.5%
  • Auto & Shop Information (AS)12.5%
  • Mechanical Comprehension (MC)12.5%

The ASVAB Career Exploration Program (ASVAB CEP) is a career-planning program sponsored by the Department of Defense. It is not simply a pass/fail test: the program pairs a validated aptitude test with an interest assessment, and the results feed career-planning tools that help participants compare their measured skills and interests against real occupations and post-secondary routes - college, certifications, apprenticeships, licensures, and more. The program is built for students in 10th grade or above, along with the educators, counselors, and parents who support them. Participation is arranged through schools: students ask their counselor when the ASVAB CEP is being offered locally, and if their school is not hosting a session, the counselor can coordinate participation at another area school with the local Education Services Specialist. Homeschool students contact the counselor at the local school where they are eligible to take part in sports and other activities. The assessment itself is multiple choice and spans eight areas: General Science, Arithmetic Reasoning, Word Knowledge, Paragraph Comprehension, Mathematics Knowledge, Electronics Information, Auto & Shop Information, and Mechanical Comprehension. Because the public program site does not publish item counts, time limits, or a fee, treat your school's test administrator as the authority for scheduling details, and prepare with broad review across all eight areas rather than drilling a single one.

Common mistakes

Immediately calculating with the numbers in an arithmetic word problem before defining the unknown or writing an equation, especially on multi-step percent, ratio, and work problems.

Time pressure makes the numbers feel actionable, and mental arithmetic hides an incorrect setup.

What to do instead

Write 'Let x = ...' and one equation with units before calculating; after solving, substitute the answer back into the original sentence to check it.

Choosing a vocabulary answer because the word looks familiar or matches the topic, without checking its part of speech and exact meaning in the sentence.

Quick recognition feels efficient, and distractors are often near-synonyms with the wrong connotation or grammar.

What to do instead

Cover the choices, predict a synonym, label the needed part of speech, then eliminate any choice that does not fit the sentence's meaning and tone.

Selecting a paragraph-comprehension choice that is true in real life or a reasonable inference but is not explicitly supported by the passage.

Prior knowledge and plausible-sounding options pull attention away from the actual text.

What to do instead

For each choice, point to the line or phrase that proves it; if no textual evidence exists, eliminate it and distinguish 'stated' from 'inferred.'

Evaluating expressions such as -3^2 as 9, or canceling terms across a plus sign, for example treating (x+2)/2 as x+1.

Memorized shortcuts and order-of-operations slips replace structural rules under time pressure.

What to do instead

Rewrite with parentheses, show one operation per line, and test with a number; remember exponentiation before negation and never cancel across addition.

Treating current as something 'used up' by each resistor in a series circuit, so later components are assumed to receive less current.

The water-pressure analogy is overextended, and voltage drop is confused with current drop.

What to do instead

Draw the series loop, label the current as the same at every point, compute voltage drops with V=IR, and use KVL to check that drops sum to the source voltage.

Believing higher-octane fuel increases engine power or is required in every engine.

Advertising and the word 'premium' imply superior performance rather than resistance to knock.

What to do instead

Learn octane rating as anti-knock resistance; use the manufacturer-specified fuel and connect high compression ratio or forced induction to higher octane need.

Guessing pulley or lever force by intuition rather than counting supporting strands or lever arms, such as assuming any movable pulley halves the effort.

Visual complexity and missing geometry make mechanical advantage seem obvious when it is not.

What to do instead

Count the rope segments supporting the movable load, compute mechanical advantage as load divided by effort or torque as force times distance, and check units.

Answering general-science items from everyday belief rather than scientific fact, such as 'sound travels faster in air than in water' or 'arteries always carry oxygenated blood.'

Plausible misconceptions are reinforced by casual language and incomplete prior instruction.

What to do instead

Keep a misconception-correction list and, for each fact, state the mechanism, such as denser media transmitting sound faster or the pulmonary artery carrying deoxygenated blood.

Converting decimal hours or mixed units incorrectly, for example treating 1.5 hours as 1 hour 50 minutes or mixing feet and inches in one calculation.

Familiar notation hides the base-60 time system and inconsistent units.

What to do instead

Convert every quantity to one unit before operating, use dimensional analysis, and write each conversion factor as a fraction that cancels unwanted units.

Using diameter instead of radius in circle formulas, or confusing area and perimeter formulas for common shapes.

Formula recall under time pressure and unlabeled diagrams invite substitution errors.

What to do instead

Write the formula first, label radius and diameter on the figure, and check that an area answer has square units while a perimeter answer has linear units.

Exam requirements can change. Confirm current details with the exam provider.

ASVAB practice

200 questions. Each one lists the choices, the correct answer, and an explanation. With JavaScript, this list opens one question at a time. The checker at the top of this page saves progress in this browser when it is available.

  1. Question 1General Science (GS)

    Which organelle is the main site of ATP production in a eukaryotic cell?

    1. Lysosome
    2. Golgi apparatus
    3. Ribosome
    4. Mitochondrion Correct answer.

    Explanation

    Mitochondria carry out aerobic respiration, using oxygen to release energy from glucose and store it in ATP molecules. Cells with high energy demands, such as muscle cells, contain large numbers of mitochondria.

  2. Question 2General Science (GS)

    Which planet is often called the Red Planet because iron oxide dust on its surface gives it a reddish color?

    1. Jupiter
    2. Mercury
    3. Venus
    4. Mars Correct answer.

    Explanation

    Mars appears reddish because its surface rocks and dust contain iron oxide, or rust. It is the fourth planet from the Sun and is smaller than Earth.

  3. Question 3General Science (GS)

    Which process changes a liquid into a gas throughout the entire liquid, not just at its surface?

    1. Condensation
    2. Boiling Correct answer.
    3. Sublimation
    4. Freezing

    Explanation

    Boiling occurs when a liquid's vapor pressure equals the surrounding pressure, so bubbles of vapor form throughout the liquid and rise to the surface. Evaporation, by contrast, happens only at the surface and at temperatures below the boiling point.

  4. Question 4General Science (GS)

    Which is the largest organ of the human body?

    1. Liver
    2. Lungs
    3. Skin Correct answer.
    4. Brain

    Explanation

    The skin is the body's largest organ by both surface area and mass. It serves as a barrier against pathogens, helps regulate temperature, and contains sensory receptors.

  5. Question 5General Science (GS)

    In a food chain, which organisms capture sunlight and convert it into chemical energy?

    1. Producers Correct answer.
    2. Primary consumers
    3. Decomposers
    4. Secondary consumers

    Explanation

    Producers, such as green plants and algae, use photosynthesis to convert light energy into chemical energy stored in sugars. All other feeding levels depend on the energy the producers capture.

  6. Question 6General Science (GS)

    Which mineral is the hardest on the Mohs hardness scale?

    1. Diamond Correct answer.
    2. Topaz
    3. Quartz
    4. Corundum

    Explanation

    The Mohs scale ranks minerals by their ability to scratch one another, from talc at 1 to diamond at 10. Diamond is the hardest naturally occurring mineral because of the strong covalent bonding of its carbon atoms.

  7. Question 7General Science (GS)

    What is the chemical symbol for sodium?

    1. Sd
    2. Na Correct answer.
    3. So
    4. N

    Explanation

    Chemical symbols come from element names, often from Latin or other historical sources. Sodium's symbol is Na, from the Latin word natrium.

  8. Question 8General Science (GS)

    Which of these materials is a good conductor of electricity?

    1. Copper Correct answer.
    2. Glass
    3. Rubber
    4. Dry wood

    Explanation

    Metals such as copper conduct electricity well because their outer electrons are loosely held and can move freely through the material. Rubber, glass, and dry wood hold their electrons tightly and act as insulators.

  9. Question 9General Science (GS)

    Which two substances do plants take in to carry out photosynthesis?

    1. Carbon dioxide and water Correct answer.
    2. Carbon dioxide and oxygen
    3. Oxygen and glucose
    4. Nitrogen and water

    Explanation

    Using light energy trapped by chlorophyll, plants combine carbon dioxide from the air with water from the soil to produce glucose, releasing oxygen as a byproduct. The glucose stores the captured energy.

  10. Question 10General Science (GS)

    A rocket moves forward by expelling hot gases backward. Which principle best explains this motion?

    1. Archimedes' principle
    2. Newton's third law Correct answer.
    3. Newton's first law
    4. Newton's law of universal gravitation

    Explanation

    Newton's third law states that every action has an equal and opposite reaction. The rocket pushes gas backward, and the gas pushes the rocket forward with an equal force.

  11. Question 11General Science (GS)

    Which statement describes a solution with a pH of 3?

    1. It has equal concentrations of hydrogen and hydroxide ions.
    2. It is basic and contains excess hydroxide ions.
    3. It is acidic and has excess hydrogen ions. Correct answer.
    4. It is neutral.

    Explanation

    The pH scale runs from 0 to 14, with values below 7 indicating acidic solutions. A pH of 3 means the solution has a relatively high concentration of hydrogen ions compared with pure water, which has a pH of 7.

  12. Question 12General Science (GS)

    In a DNA molecule, adenine on one strand pairs with which base on the opposite strand?

    1. Thymine Correct answer.
    2. Adenine
    3. Cytosine
    4. Guanine

    Explanation

    DNA bases pair by complementary shape and hydrogen bonding: adenine pairs with thymine, and guanine pairs with cytosine. This consistent pairing lets one strand serve as a template for copying the other.

  13. Question 13General Science (GS)

    Which type of blood vessel carries blood away from the heart?

    1. Capillaries
    2. Lymph vessels
    3. Arteries Correct answer.
    4. Veins

    Explanation

    Arteries carry blood away from the heart and branch into smaller vessels that lead to capillary beds. Their thick, elastic walls help them withstand the pressure created by each heartbeat.

  14. Question 14General Science (GS)

    In which layer of Earth's atmosphere does nearly all weather occur?

    1. Thermosphere
    2. Mesosphere
    3. Stratosphere
    4. Troposphere Correct answer.

    Explanation

    The troposphere is the lowest layer of the atmosphere and contains most of its water vapor and air. Heating from below creates the vertical mixing and pressure differences that produce clouds, storms, and other weather.

  15. Question 15General Science (GS)

    A pad of steel wool is sealed inside a jar of air and allowed to rust completely. The total mass of the sealed jar and its contents will be:

    1. impossible to predict
    2. greater than before rusting
    3. less than before rusting
    4. the same as before rusting Correct answer.

    Explanation

    In a closed system, matter is conserved during a chemical change; atoms are only rearranged into new compounds. The iron combines with oxygen already present inside the jar, so no mass enters or leaves.

  16. Question 16General Science (GS)

    As a roller coaster car rolls down from the top of a hill, most of its stored energy is converted into which form?

    1. Chemical energy
    2. Electrical energy
    3. Kinetic energy Correct answer.
    4. Nuclear energy

    Explanation

    An object raised above the ground has gravitational potential energy, which decreases as it descends. That stored energy is converted mainly into kinetic energy, so the car speeds up.

  17. Question 17General Science (GS)

    Bile, which helps break fats into smaller droplets, is produced by which organ?

    1. Gallbladder
    2. Pancreas
    3. Stomach
    4. Liver Correct answer.

    Explanation

    The liver produces bile, which is stored and concentrated in the gallbladder before being released into the small intestine. Bile salts emulsify fats, increasing the surface area available to fat-digesting enzymes.

  18. Question 18General Science (GS)

    A relationship between two species in which both individuals benefit is called:

    1. parasitism
    2. commensalism
    3. predation
    4. mutualism Correct answer.

    Explanation

    Mutualism is a symbiotic relationship that benefits both partners, such as bees obtaining nectar while pollinating flowers. Each species gains something that improves its survival or reproduction.

  19. Question 19General Science (GS)

    If a sound wave's frequency increases while its speed stays the same, what happens to its wavelength?

    1. It increases.
    2. It doubles.
    3. It decreases. Correct answer.
    4. It stays the same.

    Explanation

    Wave speed equals frequency multiplied by wavelength. If the speed is fixed and the frequency rises, the wavelength must shrink to keep the product constant.

  20. Question 20General Science (GS)

    Which group of elements is chemically unreactive because its atoms have complete outer electron shells?

    1. Noble gases Correct answer.
    2. Alkaline earth metals
    3. Halogens
    4. Alkali metals

    Explanation

    Noble gases such as helium and neon have full valence shells, so they neither gain nor lose electrons readily. This stable configuration makes them largely inert under ordinary conditions.

  21. Question 21General Science (GS)

    New oceanic crust is created along which type of plate boundary?

    1. Subduction zones
    2. Deep-sea trenches
    3. Mid-ocean ridges Correct answer.
    4. Continental interiors

    Explanation

    Mid-ocean ridges are divergent boundaries where plates pull apart and magma rises to fill the gap. The magma cools to form new seafloor that spreads outward from the ridge.

  22. Question 22General Science (GS)

    Water moves across a cell membrane from a region of lower solute concentration to a region of higher solute concentration without the cell using energy. This movement is called:

    1. phagocytosis
    2. active transport
    3. osmosis Correct answer.
    4. facilitated diffusion

    Explanation

    Osmosis is the diffusion of water through a selectively permeable membrane down its own concentration gradient. Because it follows the gradient, no cellular energy is required.

  23. Question 23General Science (GS)

    Water boils at a much higher temperature than hydrogen sulfide (H2S), even though the two molecules have similar shapes. What best explains this?

    1. Water molecules are heavier than hydrogen sulfide molecules.
    2. Hydrogen bonds between water molecules must be broken. Correct answer.
    3. Water contains ionic bonds that are hard to break.
    4. Water molecules have a lower molar mass than hydrogen sulfide molecules.

    Explanation

    Oxygen is more electronegative than sulfur, so water molecules form strong hydrogen bonds with one another. Boiling requires breaking many of these attractions, which takes considerably more energy.

  24. Question 24General Science (GS)

    Two 6-ohm resistors are connected in series across a 12-volt battery. What current flows through the circuit?

    1. 1 A Correct answer.
    2. 12 A
    3. 2 A
    4. 4 A

    Explanation

    In a series circuit the resistances add, giving a total of 12 ohms. Ohm's law then gives current as voltage divided by resistance, or 12 V divided by 12 ohms, which equals 1 A.

  25. Question 25General Science (GS)

    In the reaction 2H2 + O2 -> 2H2O, how many grams of water can be produced from 4.0 g of H2 when oxygen is plentiful?

    1. 36 g Correct answer.
    2. 32 g
    3. 18 g
    4. 4 g

    Explanation

    Hydrogen has a molar mass of about 2 g/mol, so 4.0 g is 2.0 mol of H2. The balanced equation shows each mole of H2 yields one mole of water, and 2 mol of water at 18 g/mol equals 36 g.

  26. Question 26Arithmetic Reasoning (AR)

    What is 15% of 200?

    1. 20
    2. 60
    3. 45
    4. 30 Correct answer.

    Explanation

    Convert the percent to a decimal by dividing by 100, so 15% = 0.15. Multiplying 0.15 by 200 gives 30.

  27. Question 27Arithmetic Reasoning (AR)

    A car travels 180 miles on 6 gallons of gas. What is its rate in miles per gallon?

    1. 30 Correct answer.
    2. 24
    3. 48
    4. 36

    Explanation

    A unit rate is found by dividing the total distance by the total number of gallons. Here 180 ÷ 6 = 30 miles per gallon.

  28. Question 28Arithmetic Reasoning (AR)

    A recipe calls for 3/4 cup of sugar. If you make half the recipe, how much sugar is needed?

    1. 1/4 cup
    2. 3/2 cups
    3. 1/2 cup
    4. 3/8 cup Correct answer.

    Explanation

    Making half the recipe means multiplying each amount by 1/2. So 3/4 × 1/2 = 3/8 cup.

  29. Question 29Arithmetic Reasoning (AR)

    What is the average of 4, 8, 10, and 14?

    1. 8
    2. 9 Correct answer.
    3. 7
    4. 8.5

    Explanation

    The average is the sum of the values divided by how many values there are. The sum is 4 + 8 + 10 + 14 = 36, and 36 ÷ 4 = 9.

  30. Question 30Arithmetic Reasoning (AR)

    A shirt costs $24.50. If you pay with a $30 bill, how much change should you receive?

    1. $6.00
    2. $5.00
    3. $5.50 Correct answer.
    4. $6.50

    Explanation

    Subtract the cost from the amount paid to find the change. $30.00 − $24.50 = $5.50.

  31. Question 31Arithmetic Reasoning (AR)

    A rectangle is 9 meters long and 4 meters wide. What is its perimeter?

    1. 72 m
    2. 36 m
    3. 26 m Correct answer.
    4. 13 m

    Explanation

    The perimeter of a rectangle is 2 times the length plus 2 times the width. So 2(9) + 2(4) = 18 + 8 = 26 meters.

  32. Question 32Arithmetic Reasoning (AR)

    If 3 pounds of apples cost $4.50, how much do 5 pounds cost at the same rate?

    1. $8.50
    2. $7.50 Correct answer.
    3. $6.50
    4. $7.00

    Explanation

    Find the unit price first: $4.50 ÷ 3 = $1.50 per pound. Then multiply $1.50 by 5 pounds to get $7.50.

  33. Question 33Arithmetic Reasoning (AR)

    How many minutes are there in 2.5 hours?

    1. 140
    2. 150 Correct answer.
    3. 125
    4. 120

    Explanation

    Each hour contains 60 minutes, so multiply the number of hours by 60. 2.5 × 60 = 150 minutes.

  34. Question 34Arithmetic Reasoning (AR)

    A jacket regularly priced at $80 is on sale for 25% off. What is the sale price?

    1. $60 Correct answer.
    2. $65
    3. $55
    4. $20

    Explanation

    The discount is 25% of $80, which is 0.25 × 80 = $20. Subtracting the discount from the original price gives $80 − $20 = $60.

  35. Question 35Arithmetic Reasoning (AR)

    A train travels at a steady 60 miles per hour for 2 hours and 15 minutes. How far does it travel?

    1. 150 mi
    2. 120 mi
    3. 135 mi Correct answer.
    4. 180 mi

    Explanation

    Convert 2 hours 15 minutes to 2.25 hours. Then multiply the speed by the time: 60 × 2.25 = 135 miles.

  36. Question 36Arithmetic Reasoning (AR)

    Pipe A can fill a tank in 6 hours, and pipe B can fill the same tank in 3 hours. Working together, how long will they take to fill the tank?

    1. 2 hours Correct answer.
    2. 4.5 hours
    3. 1.5 hours
    4. 9 hours

    Explanation

    Add the work rates: 1/6 + 1/3 = 1/6 + 2/6 = 1/2 tank per hour. The reciprocal of that combined rate gives 2 hours to fill one tank.

  37. Question 37Arithmetic Reasoning (AR)

    The sum of three consecutive integers is 84. What is the largest of the three integers?

    1. 26
    2. 28
    3. 29 Correct answer.
    4. 27

    Explanation

    Let the integers be n, n + 1, and n + 2. Their sum is 3n + 3 = 84, so 3n = 81 and n = 27. The largest integer is then 29.

  38. Question 38Arithmetic Reasoning (AR)

    A sum of $240 is divided between two people in the ratio 3:5. How much does the person with the larger share receive?

    1. $180
    2. $150 Correct answer.
    3. $120
    4. $90

    Explanation

    The ratio 3:5 has 8 equal parts, so one part is $240 ÷ 8 = $30. The larger share is 5 parts, or 5 × $30 = $150.

  39. Question 39Arithmetic Reasoning (AR)

    A product's price rises from $40 to $50. What is the percent increase?

    1. 50%
    2. 25% Correct answer.
    3. 20%
    4. 10%

    Explanation

    Percent increase equals the change divided by the original amount, times 100. The change is $10, and 10 ÷ 40 × 100 = 25%.

  40. Question 40Arithmetic Reasoning (AR)

    A circular garden has a radius of 5 meters. Using 3.14 for pi, what is its area?

    1. 31.4 m²
    2. 78.5 m² Correct answer.
    3. 15.7 m²
    4. 157 m²

    Explanation

    The area of a circle is found with the formula A = pi × r². With r = 5, r² = 25, so 3.14 × 25 = 78.5 square meters.

  41. Question 41Arithmetic Reasoning (AR)

    The average of five numbers is 12. Four of the numbers are 8, 10, 14, and 15. What is the fifth number?

    1. 11
    2. 12
    3. 13 Correct answer.
    4. 15

    Explanation

    If the average of five numbers is 12, their total is 5 × 12 = 60. The four known numbers add to 47, so the fifth number is 60 − 47 = 13.

  42. Question 42Arithmetic Reasoning (AR)

    How much simple interest is earned on $1,200 at an annual rate of 5% for 2 years?

    1. $1,320
    2. $60
    3. $240
    4. $120 Correct answer.

    Explanation

    Simple interest is principal × rate × time. Here $1,200 × 0.05 × 2 = $120.

  43. Question 43Arithmetic Reasoning (AR)

    A solution is 20% acid. How many liters of pure acid are in 15 liters of the solution?

    1. 5 L
    2. 12 L
    3. 3 L Correct answer.
    4. 2 L

    Explanation

    The amount of acid is 20% of the total volume. Multiply 0.20 by 15 liters to get 3 liters of acid.

  44. Question 44Arithmetic Reasoning (AR)

    A board 8 feet long is cut into pieces that are each 6 inches long. How many pieces are produced?

    1. 24
    2. 16 Correct answer.
    3. 12
    4. 8

    Explanation

    First convert feet to inches: 8 × 12 = 96 inches. Then divide by the length of each piece: 96 ÷ 6 = 16 pieces.

  45. Question 45Arithmetic Reasoning (AR)

    A dealer buys a bicycle for $400 and sells it for $460. What is the percent profit based on the cost?

    1. 6%
    2. 20%
    3. 12%
    4. 15% Correct answer.

    Explanation

    Profit is $460 − $400 = $60. Percent profit is profit divided by cost, so 60 ÷ 400 × 100 = 15%.

  46. Question 46Arithmetic Reasoning (AR)

    Worker A can complete a job in 12 days, and worker B can complete it in 18 days. They work together for 4 days, then A leaves. How many more days does B need to finish the job alone?

    1. 8 days Correct answer.
    2. 6 days
    3. 4 days
    4. 10 days

    Explanation

    The combined rate is 1/12 + 1/18 = 5/36 of the job per day. In 4 days they finish 20/36 = 5/9 of the job, leaving 4/9. At B's rate of 1/18 per day, the remaining work takes (4/9) ÷ (1/18) = 8 days.

  47. Question 47Arithmetic Reasoning (AR)

    How many liters of a 30% salt solution must be mixed with 20 liters of a 10% salt solution to obtain a 20% salt solution?

    1. 30 L
    2. 20 L Correct answer.
    3. 40 L
    4. 10 L

    Explanation

    Let x be the liters of 30% solution. The acid balance is 0.30x + 0.10(20) = 0.20(x + 20). Solving gives 0.10x = 2, so x = 20 liters.

  48. Question 48Arithmetic Reasoning (AR)

    A father is currently 3 times as old as his son. In 12 years, he will be twice as old as his son. How old is the son now?

    1. 8
    2. 18
    3. 12 Correct answer.
    4. 10

    Explanation

    Let the son's age be s, so the father is 3s. In 12 years the equation is 3s + 12 = 2(s + 12), which simplifies to 3s + 12 = 2s + 24, so s = 12.

  49. Question 49Arithmetic Reasoning (AR)

    A price is increased by 20% and then the new price is reduced by 20%. What is the overall change?

    1. rises 4%
    2. falls 4% Correct answer.
    3. no change
    4. falls 2%

    Explanation

    After a 20% increase the price is 1.20 times the original, and a 20% decrease multiplies that by 0.80. The net factor is 1.20 × 0.80 = 0.96, which is a 4% decrease from the original price.

  50. Question 50Arithmetic Reasoning (AR)

    How many different two-person committees can be formed from a group of 6 people?

    1. 15 Correct answer.
    2. 36
    3. 12
    4. 30

    Explanation

    Choose 2 people from 6, and divide by 2 because the order of the pair does not matter. The count is (6 × 5) ÷ 2 = 15.

  51. Question 51Word Knowledge (WK)

    The word abundant most nearly means

    1. deliberately hidden
    2. easily broken
    3. scarce in supply
    4. plentiful Correct answer.

    Explanation

    Abundant describes something that exists in large quantity, so plentiful is the closest match. The word traces to a Latin root meaning 'to overflow,' which reinforces the idea of more than enough.

  52. Question 52Word Knowledge (WK)

    The word commence most nearly means

    1. begin Correct answer.
    2. repeat
    3. finish
    4. delay

    Explanation

    Commence means to start or begin something, as in 'the ceremony will commence at noon.' The related noun commencement, used for graduation ceremonies, reinforces the idea of a beginning.

  53. Question 53Word Knowledge (WK)

    In the word bicycle, the prefix bi- means

    1. many
    2. half
    3. one
    4. two Correct answer.

    Explanation

    The prefix bi- comes from Latin and means 'two,' as in bicycle (two wheels) and bilingual (two languages). Knowing common prefixes gives a reliable clue to the meaning of unfamiliar words.

  54. Question 54Word Knowledge (WK)

    The word brief most nearly means

    1. difficult
    2. cheerful
    3. short Correct answer.
    4. lengthy

    Explanation

    Brief means lasting only a short time or using only a few words, so short is the closest match. A brief meeting, for example, is a quick one.

  55. Question 55Word Knowledge (WK)

    The word vacant most nearly means

    1. noisy
    2. crowded
    3. empty Correct answer.
    4. expensive

    Explanation

    Vacant means not occupied or containing nothing, so empty fits best. A vacant apartment, for instance, has no tenants living in it.

  56. Question 56Word Knowledge (WK)

    Which word is most nearly opposite in meaning to ancient?

    1. famous
    2. historic
    3. modern Correct answer.
    4. distant

    Explanation

    Ancient describes something very old, so its opposite must describe something belonging to the present day, which is modern. Antonym questions ask you to reverse the meaning rather than match it.

  57. Question 57Word Knowledge (WK)

    In the word fearless, the suffix -less means

    1. full of
    2. again
    3. without Correct answer.
    4. before

    Explanation

    The suffix -less means 'without,' so fearless means without fear. The same pattern appears in careless (without care) and hopeless (without hope).

  58. Question 58Word Knowledge (WK)

    The word depart most nearly means

    1. delay
    2. remain
    3. arrive
    4. leave Correct answer.

    Explanation

    To depart is to go away from a place, so leave is the closest meaning. A departing train is one that is pulling out of the station.

  59. Question 59Word Knowledge (WK)

    The word obsolete most nearly means

    1. hard to pronounce
    2. out of date Correct answer.
    3. brand new
    4. widely praised

    Explanation

    Obsolete describes something no longer in use because a newer replacement has taken its place, so out of date fits best. A typewriter is an obsolete tool for writing letters.

  60. Question 60Word Knowledge (WK)

    The word futile most nearly means

    1. productive
    2. tiring
    3. fruitless Correct answer.
    4. costly

    Explanation

    Futile means incapable of producing a useful result, so fruitless is the best match. A futile effort accomplishes nothing no matter how long it is continued.

  61. Question 61Word Knowledge (WK)

    A meticulous worker is best described as

    1. dishonest in most matters
    2. quick to lose his temper
    3. careless about small details
    4. attentive to detail Correct answer.

    Explanation

    Meticulous describes a person who gives extreme care and attention to small details. A meticulous record keeper, for example, checks every entry twice.

  62. Question 62Word Knowledge (WK)

    The word candid most nearly means

    1. secretive
    2. honest Correct answer.
    3. doubtful
    4. rude

    Explanation

    Candid means frank, open, and honest in what one says. A candid answer tells the truth even when the truth is uncomfortable.

  63. Question 63Word Knowledge (WK)

    To endorse a proposal is to

    1. question it
    2. approve it Correct answer.
    3. reject it
    4. imitate it

    Explanation

    To endorse something is to give it public support or approval, as when a celebrity endorses a product. The word implies a positive judgment about what is endorsed.

  64. Question 64Word Knowledge (WK)

    The word diminish most nearly means

    1. brighten
    2. lessen Correct answer.
    3. divide
    4. expand

    Explanation

    To diminish is to make or become smaller in size, amount, or importance, so lessen is the best match. The phrase 'diminishing returns' describes each added effort yielding less.

  65. Question 65Word Knowledge (WK)

    The word inevitable most nearly means

    1. unlikely to occur
    2. extremely dangerous
    3. immediate and sudden
    4. certain to happen Correct answer.

    Explanation

    Inevitable describes something that cannot be avoided, so it is certain to happen. The traditional example is that death and taxes are inevitable.

  66. Question 66Word Knowledge (WK)

    A legacy is something that is

    1. passed down from the past Correct answer.
    2. eagerly awaited by many people
    3. newly invented or created
    4. strictly forbidden by law

    Explanation

    A legacy is something handed down from an ancestor or from the past, such as money, property, or a tradition. The word carries a strong sense of inheritance.

  67. Question 67Word Knowledge (WK)

    The word vague most nearly means

    1. lengthy
    2. unclear Correct answer.
    3. precise
    4. honest

    Explanation

    Vague describes something expressed without clear detail, so unclear is the closest match. A vague answer leaves the listener unsure of what exactly was meant.

  68. Question 68Word Knowledge (WK)

    In the sentence 'The supervisor's terse reply ended the conversation,' the word terse most nearly means

    1. hard to follow
    2. warm and welcoming
    3. loud and angry
    4. brief and abrupt Correct answer.

    Explanation

    Terse means using very few words in a way that seems abrupt or unfriendly, which explains why the conversation stopped. Context clues such as 'ended the conversation' signal a curt, clipped response.

  69. Question 69Word Knowledge (WK)

    In the phrase 'a prompt reply,' the word prompt most nearly means

    1. hesitant
    2. cheerful
    3. quick Correct answer.
    4. delayed

    Explanation

    As an adjective, prompt means done without delay, so quick fits best. The same word can act as a verb meaning to remind someone, so the surrounding words decide the meaning.

  70. Question 70Word Knowledge (WK)

    In the sentence 'The mediator helped resolve the dispute,' the word resolve most nearly means

    1. repeat
    2. create
    3. settle Correct answer.
    4. avoid

    Explanation

    To resolve a dispute is to bring it to an end or find a solution, so settle is the best match. The noun form, resolve, means firm determination, showing again that context determines meaning.

  71. Question 71Word Knowledge (WK)

    The word lucid most nearly means

    1. hard to believe
    2. easy to follow Correct answer.
    3. extremely lucky
    4. brightly colored

    Explanation

    Lucid means clear and readily understood, whether describing writing, an explanation, or a person's thinking. It can also describe a moment of mental clarity, as in a lucid interval.

  72. Question 72Word Knowledge (WK)

    A person who is ambivalent about a decision is

    1. extremely confident
    2. indifferent to the outcome
    3. openly hostile
    4. having mixed feelings Correct answer.

    Explanation

    Ambivalent describes holding two conflicting feelings about the same thing at once, so mixed feelings captures it exactly. Crucially, the word does not mean simply not caring.

  73. Question 73Word Knowledge (WK)

    To equivocate is to

    1. speak vaguely to avoid committing Correct answer.
    2. exaggerate for dramatic effect
    3. state a position plainly and directly
    4. argue a point loudly

    Explanation

    To equivocate is to use ambiguous language so as to avoid committing to a clear position. The related adjective equivocal describes a statement that can be read in more than one way.

  74. Question 74Word Knowledge (WK)

    The word censure most nearly means

    1. express formal disapproval Correct answer.
    2. praise someone publicly and warmly
    3. ignore a problem completely
    4. measure something precisely

    Explanation

    As a verb, censure means to criticize or condemn officially and strongly, and as a noun it names that formal condemnation. It is stronger and more official than ordinary criticism.

  75. Question 75Word Knowledge (WK)

    The word pragmatic most nearly means

    1. stubborn
    2. practical Correct answer.
    3. idealistic
    4. theoretical

    Explanation

    Pragmatic describes an approach based on practical results rather than theory or ideals, so practical is the best match. A pragmatic decision favors what works over what would be perfect in principle.

  76. Question 76Paragraph Comprehension (PC)

    Many people think of the desert as empty, but it is full of life. Cactus roots spread wide and shallow so they can soak up rain quickly. Lizards burrow underground to escape the midday heat. Even the tiny kangaroo rat can go its whole life without drinking water, getting moisture from seeds instead. What is the main idea of the passage?

    1. Deserts receive very little rainfall each year.
    2. All desert animals must burrow to survive.
    3. Cactus plants are the most important desert organisms.
    4. Deserts support many kinds of living things. Correct answer.

    Explanation

    The main idea is the broad point that the supporting details add up to. Each example here - cactus roots, burrowing lizards, the kangaroo rat - shows a different way living things survive in the desert.

  77. Question 77Paragraph Comprehension (PC)

    The library will extend its weekend hours starting next month. On Saturdays it will open at 9 a.m. instead of 10 a.m., and on Sundays it will stay open until 8 p.m. instead of 6 p.m. The change was requested by students who said they needed more time to study for evening classes. According to the passage, why is the library changing its hours?

    1. To match nearby bookstore hours
    2. To allow time for building repairs
    3. To cut the cost of staff overtime
    4. To give students more study time Correct answer.

    Explanation

    When a question asks why something happens according to the passage, the answer must be stated in the text. The passage directly names students who wanted more time for evening study.

  78. Question 78Paragraph Comprehension (PC)

    The old bridge was deemed unsafe after inspectors found cracks in its support beams. City officials voted to cordon off the roadway and begin repairs immediately, warning that the structure could fail under heavy traffic. As used in the passage, what does "cordon off" most nearly mean?

    1. Repair completely
    2. Widen for traffic
    3. Block access to Correct answer.
    4. Inspect closely

    Explanation

    Context clues show the roadway is unsafe and about to be repaired, so officials would keep people away from it. "Cordon off" therefore means to close off or block access.

  79. Question 79Paragraph Comprehension (PC)

    To make pour-over coffee, first boil water and let it cool slightly. Place a paper filter in the cone and rinse it with hot water. Add the ground coffee, then pour a small amount of water over the grounds and wait for them to swell. Finally, slowly pour the rest of the water in circles and let it drain. According to the passage, what should be done right after adding the ground coffee?

    1. Boil the water again for several minutes
    2. Pour the rest of the water all at once
    3. Rinse the paper filter a second time
    4. Pour a little water and let it sit Correct answer.

    Explanation

    Order-of-events questions are answered by locating the step asked about and reading what comes next. The passage places "pour a small amount of water" and waiting for the grounds to swell immediately after adding the coffee.

  80. Question 80Paragraph Comprehension (PC)

    When the town's only factory closed, hundreds of workers lost their jobs within a week. Within a month, two restaurants on Main Street had shut their doors, and the local hardware store cut its staff in half. The mayor announced a job fair, but few new positions were available. Which conclusion is best supported by the passage?

    1. The job fair solved the town's unemployment problem.
    2. The factory closed because of a labor strike.
    3. Restaurants on Main Street were the first to close.
    4. The factory's closing hurt other local businesses. Correct answer.

    Explanation

    A valid conclusion must follow from details actually given. The sequence of the factory closing followed by restaurant closures and staff cuts points to a ripple effect on other businesses.

  81. Question 81Paragraph Comprehension (PC)

    Before you throw away that worn-out wooden chair, consider what a few hours of work can do. Sand the frame, tighten the joints with glue, and apply a fresh coat of paint. For less than the price of a new chair, you can keep a sturdy piece of furniture out of the landfill. What is the author's main purpose in this passage?

    1. To describe how wooden chairs are manufactured
    2. To explain why landfills are a growing problem
    3. To compare prices at several furniture stores
    4. To urge readers to repair old furniture Correct answer.

    Explanation

    Purpose is revealed by the verbs and the overall thrust of the passage. Directing the reader to "consider," "sand," and "apply" shows the author is trying to persuade readers to fix rather than discard.

  82. Question 82Paragraph Comprehension (PC)

    Clouds form when warm, moist air rises and cools. As the air cools, water vapor condenses onto tiny particles of dust, forming droplets so small they stay suspended in the air. Billions of these droplets together make a cloud visible from the ground. According to the passage, what causes water vapor to condense?

    1. The droplets growing heavy enough to fall
    2. The presence of strong winds
    3. The cooling of rising moist air Correct answer.
    4. The weight of dust particles

    Explanation

    Cause-and-effect questions require matching the stated cause to the stated result. The passage says condensation happens "as the air cools," making cooling the cause.

  83. Question 83Paragraph Comprehension (PC)

    The company's new policy allows employees to work from home two days each week. Staff must still attend meetings in person on Mondays and submit a weekly progress report every Friday. Managers say the arrangement has reduced commuting costs without lowering productivity. According to the passage, which requirement remains for employees working from home?

    1. They must file a weekly report. Correct answer.
    2. They must give up their assigned desks.
    3. They must come to the office every day.
    4. They must work fewer hours each week.

    Explanation

    Detail questions are answered by locating the exact statement in the text. The passage says staff must submit a weekly progress report every Friday, which is the requirement that remains.

  84. Question 84Paragraph Comprehension (PC)

    The new community center is a real gem. Its bright reading room is stocked with books for every age, the gym is spotless, and the staff greet visitors with genuine warmth. I only wish the city had built it years ago. What is the tone of the passage?

    1. Humorous
    2. Critical
    3. Enthusiastic Correct answer.
    4. Indifferent

    Explanation

    Tone reflects the writer's attitude, shown through word choice. Praising phrases such as "a real gem," "bright," and "genuine warmth" signal strong approval.

  85. Question 85Paragraph Comprehension (PC)

    Unlike the honeybee, which lives in large colonies with a single queen, the solitary bee builds its own nest and provides for its young alone. Solitary bees are often better pollinators of certain wild plants because they visit a wider variety of flowers. According to the passage, how do solitary bees differ from honeybees?

    1. They nest and raise young alone. Correct answer.
    2. They pollinate fewer kinds of plants.
    3. They live in larger colonies than honeybees.
    4. They produce more honey each year.

    Explanation

    Comparison questions ask you to match the distinguishing trait assigned to each subject. The passage contrasts the honeybee's large colony with the solitary bee that nests and cares for young by itself.

  86. Question 86Paragraph Comprehension (PC)

    For three weeks the garden received no rain. The soil cracked, the leaves of the tomato plants curled inward, and the few flowers that appeared dropped off without producing fruit. Then, after a single long storm, new blossoms opened within days. What can the reader infer from the passage?

    1. The storm destroyed the remaining tomato plants.
    2. The garden was planted too late in the season.
    3. Tomato plants never need to be watered by hand.
    4. Dry soil kept the plants from bearing fruit. Correct answer.

    Explanation

    An inference must be a reasonable step beyond the text, supported by its details. Loss of blossoms during the dry spell and new blossoms right after rain point to lack of water as the cause of no fruit.

  87. Question 87Paragraph Comprehension (PC)

    Historians once pictured the medieval village as isolated and self-sufficient, with little contact beyond the next field. Records of market fairs, traveling peddlers, and seasonal laborers tell a different story. Even a remote village was tied to a web of trade that carried salt, iron, and cloth across hundreds of miles. Which statement best expresses the main point of the passage?

    1. Market fairs were held only in large cities.
    2. Salt and iron were the only goods traded in the Middle Ages.
    3. Villages were more tied to trade than historians thought. Correct answer.
    4. Medieval villages were entirely cut off from trade.

    Explanation

    The main point is what the whole passage is arguing, usually signaled by a contrast like "once pictured" versus "a different story." The passage corrects the old image of isolation with evidence of wide trade networks.

  88. Question 88Paragraph Comprehension (PC)

    The researchers gave half the volunteers a pill containing caffeine and the other half a pill with no active ingredient. Neither group knew which pill they had received. Both groups then completed a timed puzzle. The group given the caffeine finished, on average, nearly a minute faster. Which statement is best supported by the passage?

    1. The volunteers were unaware of what they took. Correct answer.
    2. The volunteers who took the inactive pill refused to finish.
    3. The researchers knew which volunteers took the caffeine.
    4. Caffeine makes every person solve puzzles more quickly.

    Explanation

    The best-supported statement stays within what the passage states or clearly implies. The text explicitly reports that neither group knew which pill it received, which is the defining feature of the study's design.

  89. Question 89Paragraph Comprehension (PC)

    Supporters of the new rail line point to reduced traffic and shorter commutes. Critics counter that the projected cost has already doubled and that ridership estimates were based on unusually high fuel prices. Both sides agree on one point: the current bus system cannot keep pace with the region's growth. Which statement best describes how the passage presents the debate?

    1. It proves that the bus system is adequate for the region.
    2. It summarizes both sides and a point of agreement. Correct answer.
    3. It shows that critics have no evidence for their claims.
    4. It argues that the rail line should be canceled.

    Explanation

    Identifying how an argument is structured means tracking who says what. The passage gives supporters' claims, critics' claims, and a shared concern without endorsing either side.

  90. Question 90Paragraph Comprehension (PC)

    The senator's speech was lengthy but thin on specifics. She spoke for nearly an hour about the importance of education, yet offered no numbers, no timelines, and no plan for funding the programs she described. As used in the passage, what does "thin on specifics" most nearly mean?

    1. Delivered in a short amount of time
    2. Focused on a single subject
    3. Lacking concrete details Correct answer.
    4. Spoken in a quiet voice

    Explanation

    The phrase is clarified by the list that follows it. "No numbers, no timelines, and no plan" all describe an absence of concrete details, which defines being thin on specifics.

  91. Question 91Paragraph Comprehension (PC)

    The water treatment plant begins by pulling water from the river through a screen that traps large debris. The water then moves to a tank where chemicals cause dirt to clump and settle. Next, it passes through filters that remove remaining particles, and finally chlorine is added before the water is stored for use. According to the passage, when is chlorine added?

    1. While the dirt is settling in the tank
    2. After the water passes through filters Correct answer.
    3. Before the water passes through filters
    4. Before the water enters the screen

    Explanation

    Sequence questions are solved by following the signal words in order. The passage uses "Next" for filtering and "finally" for adding chlorine, placing chlorine last.

  92. Question 92Paragraph Comprehension (PC)

    The Arctic tern makes one of the longest migrations of any animal. Each year it travels from its breeding grounds in the Arctic to the Antarctic and back, a round trip of roughly 44,000 miles. The birds follow winding routes over the ocean, catching fish along the way. According to the passage, how far does the Arctic tern travel in a round trip?

    1. About 4,400 miles
    2. About 440 miles
    3. About 44,000 miles Correct answer.
    4. About 440,000 miles

    Explanation

    This is a straightforward detail question, so the answer must match the figure stated in the text exactly. The passage gives roughly 44,000 miles for the round trip.

  93. Question 93Paragraph Comprehension (PC)

    The museum opened in 1974 in a former post office. Its collection includes more than 12,000 photographs of the region. Visitors often say that the second-floor gallery is the most beautiful room in the city. Which of these statements from the passage expresses an opinion rather than a fact?

    1. The collection contains more than 12,000 photographs of the region.
    2. The museum building once served as a post office.
    3. The second-floor gallery is the city's most beautiful room. Correct answer.
    4. The museum first opened to the public in 1974.

    Explanation

    A fact can be verified, while an opinion expresses a judgment that reasonable people could dispute. Calling a room "the most beautiful" in the city is a personal evaluation that cannot be checked or proven.

  94. Question 94Paragraph Comprehension (PC)

    Bees do more than make honey. As they move from flower to flower collecting nectar, they carry pollen with them, which allows many plants to produce fruit and seeds. Without bees and other pollinators, farmers would struggle to grow almonds, apples, and squash. What is the main idea of the passage?

    1. Almonds and apples are difficult to grow.
    2. Honey is the most valuable product of bees.
    3. Farmers should keep their own beehives.
    4. Bees are essential to plant reproduction. Correct answer.

    Explanation

    The main idea is the central point the details support. Pollen transfer, fruit and seed production, and the warning about crops all combine to show how important bees are to plant reproduction.

  95. Question 95Paragraph Comprehension (PC)

    Maya checked the sky, then grabbed her umbrella and a heavy coat before leaving for the train station. The forecast on her phone had shown a line of dark clouds moving in from the west all morning. Why did Maya take an umbrella and coat?

    1. The train station was closed.
    2. She was going to the beach.
    3. She planned to stay overnight.
    4. She expected bad weather. Correct answer.

    Explanation

    A simple inference links the clues given to the action taken. Dark clouds on the forecast explain why she took both an umbrella and a heavy coat.

  96. Question 96Paragraph Comprehension (PC)

    When a heavy truck passes, the windows of the old house rattle. The truck's engine and tires send vibrations through the ground, and those vibrations travel into the house's foundation and up through the walls, setting the glass in motion. According to the passage, why do the windows rattle?

    1. Vibrations reach the glass through the walls. Correct answer.
    2. The windows are loosely attached to the frames.
    3. The truck's horn is too loud for the neighborhood.
    4. The house's foundation is made of wood.

    Explanation

    The passage traces a clear chain of cause and effect. Vibrations from the truck pass through the ground, foundation, and walls before shaking the glass.

  97. Question 97Paragraph Comprehension (PC)

    Freshwater and saltwater fish face opposite problems. A freshwater fish tends to absorb too much water through its skin, so it produces large amounts of dilute urine. A saltwater fish loses water to its surroundings and must drink constantly to replace it. What is the main idea of the passage?

    1. The two kinds of fish manage water in opposite ways. Correct answer.
    2. All fish produce unusually large amounts of dilute urine.
    3. Freshwater fish drink much more water than saltwater fish.
    4. Saltwater fish are generally healthier than freshwater fish.

    Explanation

    The first sentence states the idea the rest of the passage explains. One fish gains too much water and excretes it, while the other loses water and drinks to replace it, which is an opposite problem.

  98. Question 98Paragraph Comprehension (PC)

    The advertisement promised a "revolutionary" vacuum that would "change cleaning forever." The fine print, however, revealed that the device weighed nearly twenty pounds, needed a new filter every month, and carried a one-year warranty, while the competitor's model offered five. What does the passage suggest about the advertised vacuum?

    1. It is the lightest vacuum on the market.
    2. Its advertising exaggerates its advantages. Correct answer.
    3. It has a longer warranty than its competitor.
    4. Its filters never need to be replaced.

    Explanation

    Suggestions come from the contrast between the ad's claims and the fine print. "Revolutionary" is undercut by a heavy weight, frequent filter changes, and a shorter warranty, implying the ad overstates its benefits.

  99. Question 99Paragraph Comprehension (PC)

    Some argue that standardized tests measure nothing but the ability to take tests. That charge has merit when a test rewards memorization over reasoning. Yet a well-designed test can reveal patterns that a single teacher, seeing only one class, might miss. The problem, then, is not testing itself but the quality of the tests we choose. Which statement best captures the author's position?

    1. Tests that reward memorization are the most useful.
    2. Teachers cannot learn anything from a single class.
    3. Standardized tests should be abolished entirely.
    4. Testing is valuable when the tests are well designed. Correct answer.

    Explanation

    The author's position appears in the concluding claim, signaled by "The problem, then, is not testing itself but..." This shows the author supports testing while criticizing poor test design.

  100. Question 100Paragraph Comprehension (PC)

    In a study of two neighborhoods, residents of the first reported walking to shops an average of four times a week; residents of the second reported walking about once a week. The first neighborhood has narrow streets and sidewalks on every block, while the second is crossed by a six-lane highway and has few crosswalks. Which conclusion is best supported by the passage?

    1. Residents of the second neighborhood own more cars.
    2. Street design may influence how often residents walk. Correct answer.
    3. Walking is unhealthy in neighborhoods near highways.
    4. The first neighborhood has more shops than the second.

    Explanation

    A supported conclusion must follow from the evidence presented and be stated with appropriate caution. The paired differences in walking rates and street features point to a possible link without proving cause.

  101. Question 101Mathematics Knowledge (MK)

    What is the value of the expression 3 + 4 × 2² ?

    1. 49
    2. 28
    3. 19 Correct answer.
    4. 14

    Explanation

    The order of operations requires evaluating exponents before multiplication and addition. Here 2² = 4, then 4 × 4 = 16, and finally 3 + 16 = 19.

  102. Question 102Mathematics Knowledge (MK)

    What is 3/4 - 1/6 written in simplest form?

    1. 11/12
    2. 5/12
    3. 7/12 Correct answer.
    4. 2/10

    Explanation

    Rewrite both fractions with the least common denominator, 12: 3/4 = 9/12 and 1/6 = 2/12. Subtracting gives 9/12 - 2/12 = 7/12, which is already in lowest terms.

  103. Question 103Mathematics Knowledge (MK)

    A jacket regularly priced at $80 is on sale at 15% off. How large is the discount in dollars?

    1. $12 Correct answer.
    2. $15
    3. $8
    4. $20

    Explanation

    To find a percent of a number, change the percent to a decimal and multiply: 0.15 × 80 = 12. The discount is therefore $12.

  104. Question 104Mathematics Knowledge (MK)

    A rectangular garden measures 9 meters by 4 meters. What is its perimeter?

    1. 26 m Correct answer.
    2. 13 m
    3. 36 m
    4. 22 m

    Explanation

    The perimeter of a rectangle is 2(length + width), so here it is 2(9 + 4) = 2(13) = 26 meters.

  105. Question 105Mathematics Knowledge (MK)

    Which expression is equivalent to x³ · x⁴ ?

    1. x¹²
    2. 2x⁷
    3. x³ + x⁴
    4. x⁷ Correct answer.

    Explanation

    When multiplying powers that share the same base, keep the base and add the exponents: x³ · x⁴ = x^(3 + 4) = x⁷.

  106. Question 106Mathematics Knowledge (MK)

    A square has an area of 64 square inches. What is the length of one side?

    1. 32 in
    2. 4 in
    3. 8 in Correct answer.
    4. 16 in

    Explanation

    The area of a square equals the side length squared, so the side length is the square root of the area: √64 = 8 inches.

  107. Question 107Mathematics Knowledge (MK)

    What is the mean of the numbers 4, 9, 11, and 16?

    1. 9
    2. 13
    3. 10 Correct answer.
    4. 40

    Explanation

    The mean is the sum of the values divided by how many values there are: (4 + 9 + 11 + 16) ÷ 4 = 40 ÷ 4 = 10.

  108. Question 108Mathematics Knowledge (MK)

    For the equation 5x = 45, what is the value of x?

    1. 225
    2. 9 Correct answer.
    3. 50
    4. 40

    Explanation

    Isolate x by dividing both sides by the coefficient 5: x = 45 ÷ 5 = 9.

  109. Question 109Mathematics Knowledge (MK)

    What is the slope of the line that passes through the points (2, 3) and (6, 11)?

    1. 4
    2. 2 Correct answer.
    3. -2
    4. 1/2

    Explanation

    Slope is the change in y divided by the change in x: (11 - 3) ÷ (6 - 2) = 8 ÷ 4 = 2.

  110. Question 110Mathematics Knowledge (MK)

    Solve for x: 3x - 7 = 5x + 9.

    1. 1
    2. -1
    3. -8 Correct answer.
    4. 8

    Explanation

    Gather the variable terms on one side and the constants on the other: 3x - 5x = 9 + 7, so -2x = 16 and x = -8.

  111. Question 111Mathematics Knowledge (MK)

    A triangle has a base of 12 centimeters and a height of 7 centimeters. What is its area?

    1. 84 cm²
    2. 19 cm²
    3. 21 cm²
    4. 42 cm² Correct answer.

    Explanation

    The area of a triangle is one-half times the base times the height: (1/2)(12)(7) = 42 square centimeters.

  112. Question 112Mathematics Knowledge (MK)

    A circle has a radius of 6 centimeters. What is its area in terms of π?

    1. 36π cm² Correct answer.
    2. 12π cm²
    3. 144π cm²
    4. 6π cm²

    Explanation

    The area of a circle is πr², so substituting r = 6 gives π × 6² = 36π square centimeters.

  113. Question 113Mathematics Knowledge (MK)

    Which expression is equivalent to 2(3x + 4) - 5x ?

    1. x + 8 Correct answer.
    2. x + 4
    3. 6x + 8
    4. 11x + 8

    Explanation

    Distribute the 2 to get 6x + 8 - 5x, then combine like terms: 6x - 5x = x, leaving x + 8.

  114. Question 114Mathematics Knowledge (MK)

    Which product of two binomials equals x² - 5x + 6 ?

    1. (x+2)(x+3)
    2. (x-2)(x-3) Correct answer.
    3. (x-1)(x-6)
    4. (x-2)(x+3)

    Explanation

    You need two numbers that multiply to +6 and add to -5; those numbers are -2 and -3, so the factorization is (x - 2)(x - 3).

  115. Question 115Mathematics Knowledge (MK)

    If 3 pounds of nails cost $7.50, how much do 5 pounds cost at the same rate?

    1. $12.50 Correct answer.
    2. $15.00
    3. $10.00
    4. $11.50

    Explanation

    Set up the unit rate: $7.50 ÷ 3 = $2.50 per pound. Multiplying by 5 pounds gives 5 × $2.50 = $12.50.

  116. Question 116Mathematics Knowledge (MK)

    If x + y = 10 and x - y = 4, what is the value of x?

    1. 6
    2. 14
    3. 3
    4. 7 Correct answer.

    Explanation

    Adding the two equations eliminates y: 2x = 14, so x = 7. Substituting back gives y = 3, which satisfies both equations.

  117. Question 117Mathematics Knowledge (MK)

    A rectangular box has a length of 4 feet, a width of 5 feet, and a height of 6 feet. What is its volume in cubic feet?

    1. 30
    2. 60
    3. 15
    4. 120 Correct answer.

    Explanation

    The volume of a rectangular box is length × width × height = 4 × 5 × 6 = 120 cubic feet.

  118. Question 118Mathematics Knowledge (MK)

    Which number correctly expresses 0.00042 in scientific notation?

    1. 4.2 × 10⁻⁴ Correct answer.
    2. 4.2 × 10⁻⁵
    3. 0.042 × 10⁻¹
    4. 4.2 × 10⁴

    Explanation

    Scientific notation writes a number as a value between 1 and 10 multiplied by a power of 10. Moving the decimal point 4 places to the right gives 4.2, so the exponent must be -4.

  119. Question 119Mathematics Knowledge (MK)

    A right triangle has legs of length 6 and 8. What is the length of its hypotenuse?

    1. 14
    2. 7
    3. 10 Correct answer.
    4. 2

    Explanation

    The Pythagorean theorem states a² + b² = c², so here 36 + 64 = 100 and c = √100 = 10.

  120. Question 120Mathematics Knowledge (MK)

    Two angles of a triangle measure 45° and 65°. What is the measure of the third angle?

    1. 80°
    2. 70° Correct answer.
    3. 110°
    4. 60°

    Explanation

    The three interior angles of any triangle add to 180°, so the third angle is 180° - 45° - 65° = 70°.

  121. Question 121Mathematics Knowledge (MK)

    What are the solutions of the equation 2x² - 5x - 3 = 0 ?

    1. x = 1/2 or x = -3
    2. x = -1/2 or x = 3 Correct answer.
    3. x = 3 or x = 1/2
    4. x = -3 or x = -1/2

    Explanation

    The quadratic formula with a = 2, b = -5, and c = -3 gives x = (5 ± √(25 + 24)) / 4 = (5 ± 7)/4, so x = 3 or x = -1/2. Factoring the expression as (2x + 1)(x - 3) confirms these roots.

  122. Question 122Mathematics Knowledge (MK)

    For which values of x is the inequality -3x + 4 > 19 true?

    1. x < 5
    2. x > 5
    3. x > -5
    4. x < -5 Correct answer.

    Explanation

    Subtract 4 from both sides to obtain -3x > 15, then divide both sides by -3. Dividing an inequality by a negative number reverses the direction of the inequality symbol, so the result is x < -5.

  123. Question 123Mathematics Knowledge (MK)

    What is √50 + √18 expressed in simplest radical form?

    1. 2√17
    2. 16√2
    3. 68
    4. 8√2 Correct answer.

    Explanation

    Simplify each radical before adding: √50 = √(25 · 2) = 5√2 and √18 = √(9 · 2) = 3√2. Like radicals add by combining coefficients, so 5√2 + 3√2 = 8√2.

  124. Question 124Mathematics Knowledge (MK)

    If f(x) = 2x² - 3x + 1, what is the value of f(-2)?

    1. 11
    2. -1
    3. 15 Correct answer.
    4. 3

    Explanation

    Substitute -2 for every x: 2(-2)² - 3(-2) + 1 = 2(4) + 6 + 1 = 8 + 6 + 1 = 15.

  125. Question 125Mathematics Knowledge (MK)

    One pipe can fill a tank in 6 hours, and a second pipe can fill it in 12 hours. Working together, how long will they take to fill the tank?

    1. 3 hours
    2. 18 hours
    3. 9 hours
    4. 4 hours Correct answer.

    Explanation

    Add the work rates: 1/6 + 1/12 = 2/12 + 1/12 = 3/12 = 1/4 of the tank per hour. The time needed for one whole tank is the reciprocal of the combined rate, which is 4 hours.

  126. Question 126Electronics Information (EI)

    A 4 Ω resistor is connected across a 12 V source. What current flows through the resistor?

    1. 16 A
    2. 48 A
    3. 3 A Correct answer.
    4. 0.33 A

    Explanation

    Ohm's law states that current equals voltage divided by resistance (I = V/R). Dividing 12 V by 4 Ω gives 3 A.

  127. Question 127Electronics Information (EI)

    Three resistors of 10 Ω, 20 Ω, and 30 Ω are connected in series. What is the total resistance?

    1. 30 Ω
    2. 60 Ω Correct answer.
    3. 600 Ω
    4. 40 Ω

    Explanation

    In a series circuit the total resistance is the sum of the individual resistances. Adding 10 + 20 + 30 gives 60 Ω.

  128. Question 128Electronics Information (EI)

    A device draws 2 A when connected to a 120 V source. What power does it consume?

    1. 120 W
    2. 240 W Correct answer.
    3. 480 W
    4. 360 W

    Explanation

    Electrical power equals voltage multiplied by current (P = VI). Multiplying 120 V by 2 A gives 240 W.

  129. Question 129Electronics Information (EI)

    Which best describes the normal function of a diode?

    1. Stores electric charge
    2. Conducts in one direction only Correct answer.
    3. Amplifies a signal
    4. Conducts equally in both directions

    Explanation

    A diode is a semiconductor device that acts as a one-way valve for current, allowing flow from anode to cathode. In the reverse direction it blocks current.

  130. Question 130Electronics Information (EI)

    Which statement describes alternating current (AC)?

    1. It reverses direction periodically Correct answer.
    2. It exists only inside batteries
    3. It has constant magnitude and direction
    4. It flows in one direction only

    Explanation

    Alternating current periodically reverses direction, typically following a sine wave. Direct current, by contrast, flows steadily in one direction.

  131. Question 131Electronics Information (EI)

    What is the purpose of a fuse in a circuit?

    1. It stores energy for later use
    2. It melts when current is too high Correct answer.
    3. It converts alternating current to direct current
    4. It increases the circuit voltage

    Explanation

    A fuse contains a metal element that melts when current exceeds its rating, opening the circuit and preventing damage. It must be replaced after it operates.

  132. Question 132Electronics Information (EI)

    Which of these materials is an electrical insulator?

    1. Copper
    2. Glass Correct answer.
    3. Aluminum
    4. Silver

    Explanation

    Insulators have tightly bound electrons that do not move freely, so they resist current flow. Glass is an insulator, while the metals listed are conductors.

  133. Question 133Electronics Information (EI)

    The capacitance of a capacitor is measured in which unit?

    1. Volt
    2. Henry
    3. Ohm
    4. Farad Correct answer.

    Explanation

    Capacitance is measured in farads, named after Michael Faraday. One farad equals one coulomb of stored charge per volt.

  134. Question 134Electronics Information (EI)

    Two 6 Ω resistors are connected in parallel. What is the equivalent resistance?

    1. 12 Ω
    2. 6 Ω
    3. 0.33 Ω
    4. 3 Ω Correct answer.

    Explanation

    For two equal resistors in parallel, the equivalent resistance is half of one resistor's value. Dividing 6 Ω by 2 gives 3 Ω.

  135. Question 135Electronics Information (EI)

    A resistor has color bands brown, black, and red, with red acting as the multiplier. What is its resistance?

    1. 100 Ω
    2. 1,000 Ω Correct answer.
    3. 10,000 Ω
    4. 10 Ω

    Explanation

    Brown stands for 1, black stands for 0, and red means multiply by 100. Combining the digits gives 10 × 100 = 1,000 Ω.

  136. Question 136Electronics Information (EI)

    As the frequency of an AC signal increases, the reactance of a capacitor:

    1. Increases
    2. Stays the same
    3. Decreases Correct answer.
    4. Becomes zero

    Explanation

    Capacitive reactance is inversely proportional to frequency, following Xc = 1/(2πfC). A higher frequency therefore produces a lower reactance.

  137. Question 137Electronics Information (EI)

    A transformer has 200 turns on its primary and 50 turns on its secondary. If 120 V AC is applied to the primary, what is the secondary voltage?

    1. 30 V Correct answer.
    2. 120 V
    3. 480 V
    4. 60 V

    Explanation

    The voltage ratio equals the turns ratio: Vs/Vp = Ns/Np. Here 50/200 = 0.25, so the secondary voltage is 120 V × 0.25 = 30 V.

  138. Question 138Electronics Information (EI)

    What is a relay?

    1. A switch operated by a coil Correct answer.
    2. A type of capacitor
    3. A variable resistor
    4. A device that converts AC to DC

    Explanation

    A relay uses an electromagnet coil to operate mechanical contacts, letting a small control current switch a larger load. It also isolates the control circuit from the load circuit.

  139. Question 139Electronics Information (EI)

    A signal has a frequency of 60 Hz. What is its period?

    1. 60 ms
    2. 16.7 ms Correct answer.
    3. 6 ms
    4. 0.6 ms

    Explanation

    Period is the reciprocal of frequency: T = 1/f. Dividing 1 by 60 Hz gives about 0.0167 s, or 16.7 ms.

  140. Question 140Electronics Information (EI)

    A transistor can be used to do which of the following?

    1. Convert AC to DC
    2. Measure current
    3. Amplify or switch Correct answer.
    4. Store magnetic energy

    Explanation

    A transistor lets a small control current regulate a larger current, so it can amplify signals or act as an electronic switch. These are its two main roles in circuits.

  141. Question 141Electronics Information (EI)

    Three 1.5 V cells are connected in series. What is the total voltage?

    1. 1.5 V
    2. 0.5 V
    3. 3 V
    4. 4.5 V Correct answer.

    Explanation

    Cells connected in series add their voltages together. Adding 1.5 V + 1.5 V + 1.5 V gives 4.5 V.

  142. Question 142Electronics Information (EI)

    To measure current through a component with a multimeter, the meter should be connected:

    1. In parallel with the component
    2. Across the power supply
    3. To ground only
    4. In series with the circuit Correct answer.

    Explanation

    An ammeter must carry the current being measured, so it is placed in series with the circuit. Connecting it in parallel can short the circuit and blow the meter's fuse.

  143. Question 143Electronics Information (EI)

    What is the main property of an inductor?

    1. Stores charge in an electric field
    2. Allows current in one direction
    3. Opposes change in voltage
    4. Opposes change in current Correct answer.

    Explanation

    An inductor stores energy in a magnetic field and opposes any change in the current through it. Its opposition, called inductive reactance, increases with frequency.

  144. Question 144Electronics Information (EI)

    A resistor's fourth color band is gold. What tolerance does this indicate?

    1. ±2%
    2. ±10%
    3. ±5% Correct answer.
    4. ±1%

    Explanation

    A gold tolerance band indicates ±5%. A silver band indicates ±10%, and a missing fourth band means ±20%.

  145. Question 145Electronics Information (EI)

    Which is the correct technique for making a soldered connection?

    1. Use a low-power iron and hold it on the joint for several minutes
    2. Heat the joint and apply solder to the heated joint Correct answer.
    3. Apply solder before heating the joint
    4. Melt solder on the iron tip, then carry it to the joint

    Explanation

    A good solder joint forms when the parts themselves are hot enough to melt the solder. Heating the joint first and then feeding solder into it produces a smooth, reliable connection.

  146. Question 146Electronics Information (EI)

    At a junction, 3 A and 2 A flow into the node. One outgoing branch carries 4 A. What current flows in the other outgoing branch?

    1. 2 A
    2. 1 A Correct answer.
    3. 9 A
    4. 5 A

    Explanation

    Kirchhoff's current law says the total current entering a junction equals the total current leaving it. The total entering is 3 + 2 = 5 A, so the unknown branch carries 5 − 4 = 1 A.

  147. Question 147Electronics Information (EI)

    A 12 V source is connected across a 10 kΩ and a 20 kΩ resistor in series. What is the voltage across the 20 kΩ resistor?

    1. 12 V
    2. 6 V
    3. 8 V Correct answer.
    4. 4 V

    Explanation

    In a series circuit the voltage divides in proportion to resistance. The 20 kΩ resistor carries 20/(10+20) = 2/3 of the total resistance, so it drops 12 V × 2/3 = 8 V.

  148. Question 148Electronics Information (EI)

    An AC waveform has a peak voltage of about 170 V. What is its RMS voltage?

    1. 120 V Correct answer.
    2. 85 V
    3. 170 V
    4. 340 V

    Explanation

    For a sine wave, RMS voltage equals peak voltage divided by √2, or about 1.414. Dividing 170 V by 1.414 gives approximately 120 V.

  149. Question 149Electronics Information (EI)

    A logic gate's output is LOW only when both of its inputs are HIGH. Which gate is it?

    1. NOR
    2. NAND Correct answer.
    3. AND
    4. OR

    Explanation

    A NAND gate is an AND gate followed by an inverter, so it outputs LOW only when every input is HIGH. For all other input combinations its output is HIGH.

  150. Question 150Electronics Information (EI)

    Two 10 µF capacitors are connected in series. What is the total capacitance?

    1. 0.2 µF
    2. 10 µF
    3. 20 µF
    4. 5 µF Correct answer.

    Explanation

    Capacitors in series combine like resistors in parallel: 1/Ct = 1/C1 + 1/C2. For two equal 10 µF capacitors, the total is 10/2 = 5 µF.

  151. Question 151Auto & Shop Information (AS)

    A torque wrench is used mainly to

    1. tighten fasteners to a set torque Correct answer.
    2. stretch a bolt before installing it
    3. measure the diameter of a bolt
    4. cut new threads on a metal rod

    Explanation

    A torque wrench measures the twisting force applied to a fastener so it can be tightened to the manufacturer's specification. Too little torque lets parts loosen, while too much can stretch or snap the fastener.

  152. Question 152Auto & Shop Information (AS)

    At which point in the four-stroke cycle does the spark plug fire?

    1. near the end of the compression stroke Correct answer.
    2. as the piston moves down on the power stroke
    3. during the intake stroke
    4. during the exhaust stroke

    Explanation

    The spark fires just before the piston reaches top dead center on the compression stroke, so the burning mixture pushes the piston down through the power stroke. Ignition at any other point would fight the piston's motion and cost power.

  153. Question 153Auto & Shop Information (AS)

    Which list shows the four strokes of a four-stroke engine in the correct order?

    1. intake, compression, power, exhaust Correct answer.
    2. intake, exhaust, compression, power
    3. power, intake, compression, exhaust
    4. compression, power, exhaust, intake

    Explanation

    Each cylinder draws in the air-fuel mixture, compresses it, burns it to push the piston down, and then pushes out the exhaust. That cycle takes two crankshaft revolutions in a four-stroke engine.

  154. Question 154Auto & Shop Information (AS)

    Which protection is most important when using a bench grinder?

    1. safety glasses or a face shield Correct answer.
    2. earmuffs rated for high noise levels
    3. a disposable dust mask over the nose
    4. a heavy rubber apron over the chest

    Explanation

    A grinder throws hot metal chips and abrasive grit at high speed, so eye and face protection matters most. A face shield worn over safety glasses gives the best coverage.

  155. Question 155Auto & Shop Information (AS)

    A Phillips screwdriver is made to fit

    1. a cross-shaped recess Correct answer.
    2. a six-pointed star recess
    3. a square recess
    4. a single straight slot

    Explanation

    A Phillips driver has a tapered cross-shaped tip that fits a matching recess and tends to cam out under excess torque. A slotted driver fits a single straight slot, and a Torx driver fits a star-shaped recess.

  156. Question 156Auto & Shop Information (AS)

    With the engine running, which part keeps the battery charged?

    1. the starter motor
    2. the radiator fan
    3. the fuel pump
    4. the alternator Correct answer.

    Explanation

    The alternator is spun by a belt and generates current that runs the electrical loads and recharges the battery while the engine runs. The starter only cranks the engine and draws current from the battery.

  157. Question 157Auto & Shop Information (AS)

    A typical 50/50 engine coolant mixture is half water and half

    1. antifreeze Correct answer.
    2. motor oil
    3. gasoline
    4. brake fluid

    Explanation

    Antifreeze is blended with water so the mixture resists freezing, resists boiling, and carries corrosion inhibitors. Water alone can freeze in the block, boil over, and promote rust.

  158. Question 158Auto & Shop Information (AS)

    A motor oil labeled 10W-30 is best described as

    1. a multigrade oil rated for cold and heat Correct answer.
    2. a single-grade oil intended for warm weather use
    3. an oil that must be premixed with gasoline
    4. an oil intended for winter use only

    Explanation

    The number before the W rates cold-weather flow and the number after it rates viscosity at operating temperature. A multigrade oil resists thickening when cold and thinning when hot better than a single-grade oil does.

  159. Question 159Auto & Shop Information (AS)

    Air gets into a vehicle's hydraulic brake system. The brake pedal will most likely feel

    1. locked in the released position
    2. exactly the same as before
    3. firmer and stops higher up
    4. spongy and may travel farther Correct answer.

    Explanation

    Brake fluid is nearly incompressible, but air bubbles compress under pressure, so part of the pedal travel is spent squeezing them instead of moving the brake pistons. That produces a spongy, low pedal that is corrected by bleeding the system.

  160. Question 160Auto & Shop Information (AS)

    On a disc brake, the part that squeezes the pads against the spinning rotor is the

    1. wheel cylinder
    2. proportioning valve
    3. master cylinder
    4. caliper Correct answer.

    Explanation

    The caliper straddles the rotor and holds the pads; hydraulic pressure pushes its piston so the pads clamp the rotor and create friction. Drum brakes use wheel cylinders, and the master cylinder creates pressure for the whole system.

  161. Question 161Auto & Shop Information (AS)

    A micrometer is the best choice for measuring

    1. electrical resistance in a circuit
    2. tire tread depth in millimeters
    3. a shim's thickness to 0.001 inch Correct answer.
    4. the speed of a spinning shaft

    Explanation

    A micrometer's calibrated screw lets it read very small distances, typically to 0.001 inch or 0.01 mm, which suits measuring shim thickness. Tread depth uses a dedicated gauge, and electrical resistance is read with a multimeter.

  162. Question 162Auto & Shop Information (AS)

    A driving gear with 10 teeth turns a driven gear with 30 teeth. The driven gear

    1. stays still while the driving gear turns
    2. turns at the same speed as the driving gear
    3. turns one-third as fast as the driving gear Correct answer.
    4. turns three times as fast as the driving gear

    Explanation

    The speed ratio is driven teeth divided by driving teeth, or 30 divided by 10, which is 3, so the large gear turns one-third as fast as the small one. Torque is multiplied by the same 3:1 factor.

  163. Question 163Auto & Shop Information (AS)

    Tread wear indicator bars molded into a tire's grooves show

    1. when the tire is worn out Correct answer.
    2. the tire's maximum load rating
    3. the correct inflation pressure
    4. how much the wheel is misaligned

    Explanation

    The wear bars sit at the minimum legal tread depth; when the tread is worn level with them, the tire can no longer channel water well and should be replaced. They do not measure pressure, load capacity, or alignment.

  164. Question 164Auto & Shop Information (AS)

    The main job of shock absorbers is to

    1. keep the tires inflated to the recommended pressure
    2. align the front wheels while driving
    3. raise the vehicle's ride height when loaded
    4. damp spring bounce and keep tires on the road Correct answer.

    Explanation

    Shock absorbers are dampers: they resist the springs' oscillation so the body settles after a bump and the tires stay in contact with the road. The springs carry the weight, so shocks do not set ride height.

  165. Question 165Auto & Shop Information (AS)

    With the engine off, a digital multimeter reads 12.6 volts across the battery terminals. This most nearly means the battery is

    1. completely discharged
    2. being overcharged by the alternator
    3. at a normal state of charge Correct answer.
    4. shorted internally

    Explanation

    A fully charged 12-volt battery at rest reads about 12.6 volts, roughly 2.1 volts for each of its six cells. With the engine running, the charging system should hold about 13.5 to 14.5 volts.

  166. Question 166Auto & Shop Information (AS)

    A catalytic converter reduces

    1. the noise made by the exhaust system
    2. the amount of oil the engine burns
    3. pressure that builds in the fuel tank
    4. harmful exhaust emissions Correct answer.

    Explanation

    The converter's catalyst promotes reactions that turn carbon monoxide and unburned hydrocarbons into carbon dioxide and water, and nitrogen oxides into nitrogen. It changes exhaust chemistry only; oil use, tank pressure, and sound are separate systems.

  167. Question 167Auto & Shop Information (AS)

    On an interference engine, the timing belt breaks while the engine is running. The most likely result is

    1. only the charging system stops working
    2. bent valves and possible piston damage Correct answer.
    3. the engine stalls but restarts normally
    4. the brake system loses pressure

    Explanation

    In an interference engine, valves and pistons occupy the same space at different points in the cycle, so losing the timing belt lets the pistons strike open valves. The usual result is bent valves, and sometimes damaged pistons or cylinder heads.

  168. Question 168Auto & Shop Information (AS)

    On a manual-transmission car, engine speed rises but the car gains speed slowly, especially on hills. The most likely cause is

    1. low tire pressure
    2. a clogged air filter
    3. worn brake pads dragging
    4. a slipping clutch Correct answer.

    Explanation

    Rising engine speed without a matching rise in road speed means the clutch disc is not passing torque to the transmission, which is typical of a worn disc, a weak pressure plate, or oil contamination. Dragging brakes or low tires would slow the car but would not let the engine rev freely.

  169. Question 169Auto & Shop Information (AS)

    A fully charged battery cranks the starter slowly, and the headlights dim sharply while cranking. The most likely cause is

    1. excess resistance in the battery cables Correct answer.
    2. a stuck-open thermostat
    3. a worn brake rotor
    4. an overfilled cooling system

    Explanation

    A battery that is charged but cannot deliver starter current usually has excessive resistance at the terminals or inside the cables, which causes a large voltage drop under load. Cleaning and tightening the connections is the first check before load-testing the battery and starter.

  170. Question 170Auto & Shop Information (AS)

    Many engines require cylinder head bolts to be tightened in a set sequence and in stages mainly to

    1. save time during assembly
    2. keep the bolts from rusting in place
    3. avoid having to use a torque wrench
    4. prevent head warping and uneven clamping Correct answer.

    Explanation

    Tightening from the center outward in steps spreads the clamping force evenly across the gasket, which prevents head distortion and leaks. Tightening in one pass can cock the head or crush the gasket unevenly.

  171. Question 171Auto & Shop Information (AS)

    Coarse sandpaper, such as 40 grit, is used mainly to

    1. polish metal to a mirror shine
    2. seal bare wood before painting
    3. remove wood quickly Correct answer.
    4. put a final smooth finish on the wood

    Explanation

    Grit numbers rate abrasive particle size: low numbers cut fast and are used for shaping and removing stock. High numbers produce smooth surfaces and are used for finishing.

  172. Question 172Auto & Shop Information (AS)

    Which tool is best for turning a large threaded steel pipe?

    1. a hacksaw
    2. a torque wrench
    3. an adjustable wrench
    4. a pipe wrench Correct answer.

    Explanation

    A pipe wrench's serrated jaws bite into smooth round pipe and grip harder as force is applied to the handle. Adjustable wrenches fit hex fasteners, torque wrenches control fastener torque, and a hacksaw only cuts.

  173. Question 173Auto & Shop Information (AS)

    When driving a large wood screw into hardwood, drilling a pilot hole first mainly helps to

    1. make the screw head sit flush with the surface
    2. raise the screw's holding power above spec
    3. harden the screw threads
    4. keep the wood from splitting Correct answer.

    Explanation

    A pilot hole slightly smaller than the screw's core gives the threads wood to cut into while leaving room for the shank, which reduces driving torque and keeps hardwood from splitting. It does not change the screw's rated holding power.

  174. Question 174Auto & Shop Information (AS)

    Soldering differs from welding in that soldering

    1. melts the edges of the base metals
    2. uses a lower-melting filler metal Correct answer.
    3. requires no heat at all
    4. works only on steel and iron

    Explanation

    Soldering and brazing melt a filler that flows into the joint without melting the parts being joined, whereas welding melts the base metal itself. Solder melts at a lower temperature than brazing filler.

  175. Question 175Auto & Shop Information (AS)

    A squealing noise from the front of an engine that gets louder when the air conditioner is switched on usually points to

    1. low engine oil level
    2. a leaking radiator hose
    3. a worn spark plug
    4. a loose or glazed drive belt Correct answer.

    Explanation

    A squeal that appears or worsens when an accessory loads the belt points to a belt that is loose, glazed, or worn, so it slips on its pulleys. Checking belt tension, condition, and the automatic tensioner is the usual next step.

  176. Question 176Mechanical Comprehension (MC)

    Where is the fulcrum of a first-class lever located?

    1. At the end of the bar where the effort is applied
    2. At the end of the bar nearest the load
    3. Directly beneath the heaviest part of the load
    4. Between the effort force and the load Correct answer.

    Explanation

    Levers are grouped into classes by the order of fulcrum, load, and effort. A first-class lever, such as a crowbar or a seesaw, always has its pivot between the effort and the load. That arrangement lets the lever reverse the direction of the effort as well as multiply it.

  177. Question 177Mechanical Comprehension (MC)

    A single fixed pulley is used to raise a load. What does this pulley provide?

    1. A reduction in the work that must be done
    2. A mechanical advantage of two
    3. A change in the direction of the effort Correct answer.
    4. A gain in the speed at which the load rises

    Explanation

    A fixed pulley is anchored in place, so the rope simply passes over it. The effort equals the load, giving a mechanical advantage of one, but pulling down raises the load upward. It changes direction only, not force, work, or speed.

  178. Question 178Mechanical Comprehension (MC)

    Two spur gears mesh directly together. If the driver gear turns clockwise, the driven gear turns in which direction?

    1. Clockwise at the same speed
    2. Clockwise, but more slowly
    3. In whichever direction it is pushed
    4. Counterclockwise Correct answer.

    Explanation

    Where the teeth of two gears touch, the tooth faces slide past one another in opposite directions. As a result, meshed gears always rotate opposite ways. Speed and torque depend on the tooth counts, but the reversal of direction does not.

  179. Question 179Mechanical Comprehension (MC)

    A doorknob is an example of which simple machine?

    1. A wedge
    2. An inclined plane
    3. A wheel and axle Correct answer.
    4. A movable pulley

    Explanation

    A knob is a wheel attached to a smaller shaft, the axle, and both turn together about the same center. Turning the wide knob through a large distance turns the narrow shaft through a short distance with greater torque. This is the defining action of a wheel and axle.

  180. Question 180Mechanical Comprehension (MC)

    Why does a sharp knife cut more easily than a dull one?

    1. Its narrow edge creates much greater pressure Correct answer.
    2. It applies a smaller force to the material
    3. It reduces friction between the blade and the material
    4. Its wide edge spreads the force over more area

    Explanation

    Pressure equals force divided by area. A sharp edge concentrates the same hand force on a very small area, producing very high pressure that severs the material. A dull edge spreads the force, lowering the pressure.

  181. Question 181Mechanical Comprehension (MC)

    Which change makes a tall bookcase less likely to tip over?

    1. Widening its base Correct answer.
    2. Making it taller and lighter
    3. Raising its center of gravity
    4. Adding weight near the top

    Explanation

    An object tips when its center of gravity moves outside the area of its base. A wider base extends the tipping point farther from the center, so the object must lean much further before it falls. Lowering the center of gravity also helps, but widening the base is what increases the margin of stability.

  182. Question 182Mechanical Comprehension (MC)

    Oil is added between two sliding metal surfaces mainly to do which of the following?

    1. Increase the pressure between the surfaces
    2. Increase the mechanical advantage of the parts
    3. Increase the force of gravity on the parts
    4. Reduce the friction between the surfaces Correct answer.

    Explanation

    A lubricant forms a thin film that keeps the surfaces from touching directly, so sliding friction is replaced by much lower fluid friction. Less friction means less heat, less wear, and less force needed to keep the parts moving. Lubrication does not change the geometry of a machine or its weight.

  183. Question 183Mechanical Comprehension (MC)

    As a weather balloon rises high into the atmosphere, what happens to the air pressure outside it?

    1. It decreases gradually Correct answer.
    2. It stays exactly the same
    3. It increases steadily
    4. It falls to zero at once

    Explanation

    Atmospheric pressure comes from the weight of the air above a point. The higher you go, the less air remains overhead, so the pressure falls. The decrease is smooth and gradual because the atmosphere thins out with altitude rather than ending abruptly.

  184. Question 184Mechanical Comprehension (MC)

    A 12-foot ramp rises 3 feet from one end to the other. Ignoring friction, what is the mechanical advantage of the ramp?

    1. 36
    2. 3
    3. 4 Correct answer.
    4. 9

    Explanation

    For an inclined plane, mechanical advantage equals the length of the slope divided by its vertical rise. Here 12 feet divided by 3 feet gives 4, meaning the load feels one-fourth of its weight along the ramp. The ramp does not reduce the total work; it spreads it over a longer distance.

  185. Question 185Mechanical Comprehension (MC)

    A lever has an effort arm of 6 feet and a load arm of 1.5 feet. Ignoring friction, what is its mechanical advantage?

    1. 2
    2. 4.5
    3. 7.5
    4. 4 Correct answer.

    Explanation

    A lever's mechanical advantage is the effort arm length divided by the load arm length. Dividing 6 feet by 1.5 feet gives 4, so the lever multiplies the applied effort four times. This ratio holds regardless of the units used, as long as both arms are measured the same way.

  186. Question 186Mechanical Comprehension (MC)

    A worker pushes a crate with a steady force of 50 pounds through a distance of 4 feet in the direction of the force. How much work is done?

    1. 54 foot-pounds
    2. 12.5 foot-pounds
    3. 800 foot-pounds
    4. 200 foot-pounds Correct answer.

    Explanation

    Work equals force multiplied by the distance moved in the direction of that force. Here 50 pounds times 4 feet gives 200 foot-pounds. If the force were applied at an angle, only the component along the motion would count.

  187. Question 187Mechanical Comprehension (MC)

    A motor lifts a 200-pound weight 5 feet in 4 seconds. What is the motor's power output?

    1. 50 foot-pounds per second
    2. 250 foot-pounds per second Correct answer.
    3. 800 foot-pounds per second
    4. 160 foot-pounds per second

    Explanation

    Power is the rate of doing work, so first find the work and then divide by time. Lifting 200 pounds through 5 feet requires 1,000 foot-pounds. Dividing that by 4 seconds gives 250 foot-pounds per second.

  188. Question 188Mechanical Comprehension (MC)

    In a hydraulic press, a force of 50 pounds is applied to a piston with an area of 2 square inches. The pressure is transmitted to a piston with an area of 20 square inches. What force does the larger piston exert?

    1. 5 pounds
    2. 500 pounds Correct answer.
    3. 250 pounds
    4. 100 pounds

    Explanation

    Pascal's principle says pressure applied to a confined fluid is transmitted undiminished throughout it. The pressure is 50 pounds divided by 2 square inches, or 25 pounds per square inch. Multiplying that pressure by the 20-square-inch area gives 500 pounds.

  189. Question 189Mechanical Comprehension (MC)

    A mechanic wants to loosen a tight bolt using the same steady pull. Which wrench choice produces the greatest turning effect?

    1. A shorter wrench with a thicker handle
    2. A wrench made of a lighter metal
    3. A longer wrench Correct answer.
    4. A wrench with a larger head

    Explanation

    Torque equals force multiplied by the perpendicular distance from the pivot to the line of the force. Lengthening the wrench increases that distance, so the same pull produces more torque. Handle thickness, head size, and material weight do not change the lever arm.

  190. Question 190Mechanical Comprehension (MC)

    A spring stretches 2 inches when a 10-pound weight hangs from it. Within its elastic limit, how far will the same spring stretch with a 30-pound weight?

    1. 4 inches
    2. 6 inches Correct answer.
    3. 12 inches
    4. 3 inches

    Explanation

    Within the elastic limit, a spring's stretch is directly proportional to the applied force. The spring stretches 2 inches for each 10 pounds, so 30 pounds produces three times that stretch. Doubling or tripling the load doubles or triples the extension.

  191. Question 191Mechanical Comprehension (MC)

    A movable pulley system supports a 300-pound load with three rope segments pulling upward. Ignoring friction and the weight of the pulleys, what effort is required?

    1. 100 pounds Correct answer.
    2. 150 pounds
    3. 900 pounds
    4. 300 pounds

    Explanation

    Each rope segment supporting the load carries an equal share of the weight. With three supporting segments, the effort is the load divided by three. Dividing 300 pounds by 3 gives 100 pounds of effort.

  192. Question 192Mechanical Comprehension (MC)

    A solid object will float in a liquid when which of the following is true?

    1. The object is denser than the liquid
    2. The object is completely sealed shut
    3. The object is less dense than the liquid Correct answer.
    4. The object weighs more than the liquid it displaces

    Explanation

    Buoyant force equals the weight of the fluid displaced by the object. If the object's overall density is lower than the liquid's, the displaced fluid weighs more than the object and it floats. If the object is denser, it displaces less than its own weight and sinks.

  193. Question 193Mechanical Comprehension (MC)

    A machine is supplied with 500 foot-pounds of work and delivers 400 foot-pounds of useful work. What is its efficiency?

    1. 20 percent
    2. 100 percent
    3. 80 percent Correct answer.
    4. 125 percent

    Explanation

    Efficiency is useful work output divided by total work input, expressed as a percent. Dividing 400 by 500 gives 0.8, or 80 percent. The remaining 20 percent is lost mainly to friction and to moving the machine's own parts.

  194. Question 194Mechanical Comprehension (MC)

    A screw has 8 threads per inch. How far does it advance into the wood during one complete turn?

    1. One inch
    2. One-eighth of an inch Correct answer.
    3. One-sixteenth of an inch
    4. Eight inches

    Explanation

    A screw is an inclined plane wrapped around a cylinder, and its pitch is the distance advanced per full turn. That distance is the reciprocal of the number of threads per inch. Dividing 1 inch by 8 threads gives one-eighth of an inch per turn.

  195. Question 195Mechanical Comprehension (MC)

    A 100-pound crate slides across a level floor, and the coefficient of sliding friction between the crate and floor is 0.3. What is the friction force acting on the crate?

    1. 300 pounds
    2. 33 pounds
    3. 30 pounds Correct answer.
    4. 3 pounds

    Explanation

    On a level surface the normal force equals the crate's weight, and friction equals the coefficient of friction multiplied by that normal force. Multiplying 0.3 by 100 pounds gives 30 pounds. The friction force opposes the sliding motion.

  196. Question 196Mechanical Comprehension (MC)

    A 12-tooth gear turning at 120 revolutions per minute drives a 36-tooth gear. At what speed does the driven gear turn?

    1. 40 rpm Correct answer.
    2. 60 rpm
    3. 120 rpm
    4. 360 rpm

    Explanation

    Meshed gears move the same number of teeth per minute, so speed varies inversely with tooth count. The driven gear has 36 divided by 12, or three times as many teeth, so it turns one-third as fast. One-third of 120 rpm is 40 rpm, while its torque is three times as great.

  197. Question 197Mechanical Comprehension (MC)

    A hoist has an ideal mechanical advantage of 5 and is 80 percent efficient. What effort is required to lift a 400-pound load?

    1. 80 pounds
    2. 100 pounds Correct answer.
    3. 125 pounds
    4. 64 pounds

    Explanation

    Efficiency reduces the ideal advantage: the actual mechanical advantage is 5 times 0.8, or 4. The required effort is therefore 400 pounds divided by 4, which is 100 pounds. The extra effort above the frictionless value of 80 pounds overcomes friction in the hoist.

  198. Question 198Mechanical Comprehension (MC)

    Brass and steel strips of equal length are bonded together to make a bimetallic strip, and brass expands more than steel when heated. How does the strip bend as it warms?

    1. It remains straight because both metals are heated equally
    2. It bends toward the steel side Correct answer.
    3. It bends toward the brass side
    4. It flexes back and forth as it heats

    Explanation

    The two metals are heated equally, but brass lengthens more, so the brass side becomes the longer outer curve of the bend. The shorter steel side forms the inside of the curve. The strip therefore curves toward the steel.

  199. Question 199Mechanical Comprehension (MC)

    A 150-pound child sits 4 feet from the fulcrum of a balanced seesaw. How far from the fulcrum must a 100-pound child sit on the other side?

    1. 4 feet
    2. 6 feet Correct answer.
    3. 8 feet
    4. 2.7 feet

    Explanation

    A seesaw balances when the torque on each side is equal, meaning weight times distance matches on both sides. The first child produces 150 times 4, or 600 foot-pounds of torque. Dividing 600 by 100 pounds gives 6 feet for the lighter child.

  200. Question 200Mechanical Comprehension (MC)

    A pulley system has a mechanical advantage of 4. To raise a load 1 foot, how much rope must be pulled, and why?

    1. 1 foot, because pulleys do not affect distance
    2. 4 feet, because distance is traded for force Correct answer.
    3. 4 feet, because machines create energy
    4. One-quarter foot, because force is multiplied four times

    Explanation

    A machine multiplies force only by making the effort move through a proportionally longer distance, so work input equals work output. With an advantage of 4, the effort must move 4 feet to raise the load 1 foot. Machines never create energy; they only redistribute force and distance.

ASVAB flashcards

32 cards. Read the term and the definition here. The deck at the top of this page is optional.

Photosynthesis equation
Carbon dioxide plus water plus light energy yields glucose and oxygen: 6CO2 + 6H2O + light -> C6H12O6 + 6O2; chloroplasts carry out this process in plants.
Atomic number
The number of protons in an atom's nucleus; it determines the element's identity and equals the electron count in a neutral atom.
pH scale
A 0-to-14 scale of hydrogen-ion concentration; below 7 is acidic, 7 is neutral, and above 7 is basic; each unit represents a tenfold change.
Rock types
Igneous rock forms from cooling magma or lava; sedimentary rock forms from compacted or cemented sediments; metamorphic rock forms from existing rock changed by heat and pressure.
Percent formula
Part equals percent times whole. Convert the percent to a decimal before multiplying; to find a percent change, divide the change by the original amount and multiply by 100.
Average formula
Average equals the sum of all values divided by the number of values. Rearranged, total equals average times count, which helps find missing totals.
Distance formula
Distance equals rate times time. Equivalent forms are rate equals distance divided by time, and time equals distance divided by rate, using consistent units.
Simple interest formula
Interest equals principal times annual interest rate times time in years, written I = P × r × t; express the rate as a decimal, not a percent.
Prefix pre-
A prefix meaning before or earlier, as in preview, predict, and prehistoric; recognizing it helps determine a word's meaning from its parts.
Suffix -ology
A suffix meaning the study of or science of, as in biology, geology, and psychology; words ending this way usually name fields of knowledge.
Contrast context clue
A clue using words such as but, although, however, or unlike to signal that an unfamiliar word means the opposite of a nearby word or idea.
Root bene
A Latin root meaning good or well, seen in benefit, benevolent, and benefactor; it usually gives a positive meaning to the word.
Main idea
The central point a passage communicates about its topic; supporting details explain or prove it, and it is often stated near the beginning or end.
Inference
A conclusion logically supported by details in a passage but not directly stated; valid inferences stay close to the text rather than adding unsupported assumptions.
Author's purpose
The reason a writer produces a text, commonly to inform, persuade, entertain, or explain; content, tone, and language help identify which purpose is primary.
Fact versus opinion
A fact is a statement that can be verified with evidence; an opinion expresses a judgment, belief, or feeling and often includes evaluative words.
Pythagorean theorem
In a right triangle, the square of the hypotenuse equals the sum of the squares of the other two sides: a² + b² = c², where c is the hypotenuse.
Slope formula
The slope of a line through two points is the change in y divided by the change in x: m = (y2 − y1)/(x2 − x1); horizontal lines have slope zero.
Area of a circle
The area enclosed by a circle equals pi times the radius squared, A = πr²; circumference equals two times pi times the radius.
Quadratic formula
For ax² + bx + c = 0, solutions are x = [−b ± √(b² − 4ac)]/(2a), provided a is not zero; the discriminant b² − 4ac indicates root type.
Ohm's law
Voltage equals current times resistance, V = I × R; rearranged, current equals voltage divided by resistance and resistance equals voltage divided by current.
Electrical power formula
Power in watts equals voltage times current, P = V × I; using Ohm's law, it also equals current squared times resistance or voltage squared divided by resistance.
Series circuit
A circuit with one path: current is the same through all components, total resistance is the sum of resistances, and voltage divides among the components.
Parallel circuit
A circuit with multiple paths: voltage is the same across each branch, total current divides among branches, and total resistance is less than the smallest branch resistance.
Four-stroke engine
A gasoline engine cycle with intake, compression, power, and exhaust strokes; the spark plug ignites the compressed air-fuel mixture during the power stroke.
Alternator function
An engine-driven generator that produces electricity to run a vehicle's electrical systems and recharge the battery while the engine is running.
Fuse purpose
A protective device containing a metal strip that melts and opens the circuit when current exceeds its rating, preventing overheating or fire; replace it with the same rating.
Brake caliper
A hydraulic component that squeezes brake pads against a spinning disc rotor to create friction and slow or stop a vehicle.
Mechanical advantage
The ratio of output force to input force in a machine, or output distance to input distance; a value greater than one means the machine multiplies force.
First-class lever
A lever with the fulcrum between the effort and the load, such as a seesaw or crowbar; it can change force direction and provide mechanical advantage.
Gear ratio
The number of teeth on the driven gear divided by the number on the driving gear; a larger driven gear turns slower but delivers more torque.
Hydraulic pressure
Pressure equals force divided by area; in a hydraulic system, pressure is transmitted equally, so a larger piston area produces a larger output force.

ASVAB study guide

General Science

What the questions cover

General Science tests breadth, not depth. Expect life science (cell structures, photosynthesis and respiration, DNA and heredity, ecosystems, human body systems), chemistry (atomic structure, the periodic table, physical vs chemical change, states of matter, acids and bases), physics (Newton's laws, work and energy, heat transfer, waves, simple circuits), and earth/space science (the water cycle, rock types, plate tectonics, seasons, moon phases, planets).

Traps to watch

  • Reversing reactants and products: photosynthesis takes in carbon dioxide and water and releases oxygen and glucose; respiration does the reverse.
  • Confusing mass and weight. Mass is the amount of matter and does not change with location; weight is a force that changes with gravity.
  • Reading the pH scale backwards. Below 7 is acidic, above 7 is basic, and each whole step is a tenfold change in hydrogen ion concentration.
  • Mixing up independent and dependent variables, or calling a hypothesis a theory.
  • Confusing mitosis (body cells, two identical daughter cells) with meiosis (sex cells, four cells with half the chromosomes).

Rule of thumb

Density links mass and volume and appears constantly: density = mass divided by volume. A block with a mass of 40 g and a volume of 5 cm cubed has a density of 8 g per cm cubed. Asked whether it floats in water (1 g per cm cubed), the answer is no, because 8 is greater than 1. Write the units first, then divide.

Arithmetic Reasoning

Core skills

Most Arithmetic Reasoning items are dressed-up versions of a few templates: percent change, rates (distance = rate times time), proportions, averages, work rates, simple interest, and unit conversions. Translate each sentence into an equation before computing, and label every number with its unit.

Traps

  • Percent of versus percent more than. A 20 percent increase multiplies by 1.20; a 20 percent decrease multiplies by 0.80. They do not cancel out.
  • Average speed is total distance divided by total time, not the average of the two speeds.
  • Mixed units: minutes paired with hours, or cents paired with dollars.
  • Chained fractions. After spending one third, two thirds remain; spending one quarter of that remainder leaves three quarters of two thirds, not one half of the original.
  • Work problems add rates, not times. If one pipe fills a tank in 3 hours and another in 6 hours, together they fill 1/3 + 1/6 = 1/2 tank per hour, so 2 hours total.
  • Of versus more than and part-to-part versus part-to-whole ratios.

Worked example

A car travels 120 miles outbound at 60 mph and returns at 40 mph. Total distance is 240 miles. Time outbound is 2 hours and time back is 3 hours, so total time is 5 hours. Average speed = 240 divided by 5 = 48 mph, not 50. Whenever a problem gives two speeds over equal distances, expect the answer to be lower than the simple average.

Word Knowledge

What is tested

Word Knowledge asks for the closest meaning, usually a synonym and occasionally an antonym. Words range from common to fairly advanced, so the winning strategy combines vocabulary with elimination.

How to attack an unknown word

  1. Cover the choices and predict a meaning from the sentence or the word itself.
  2. Break the word into parts. Prefixes and roots carry most of the meaning: bene- means good, mal- means bad, cred- means believe, dict- means say, ject- means throw, spec- means look. Endings signal part of speech: -ous and -ful are usually adjectives, -tion signals a noun, -ize signals a verb.
  3. Judge the charge. Is the word positive, negative, or neutral? Frugal is neutral-positive (careful with money); stingy is negative.
  4. Eliminate choices that are related but not equivalent, the wrong part of speech, or too extreme.

Traps

  • Picking a word you have seen alongside the tested word rather than one with the same meaning.
  • Choosing the antonym when the stem asks for the same meaning.
  • Ignoring multiple meanings: grave can mean serious or a burial place; in isolation, pick the most common sense.
  • Choosing a term that is noticeably narrower or broader than the original.

Rule of thumb

If two answers look right, choose the one that could replace the word in a sentence without changing the meaning, and prefer the less dramatic option. Distractors on this test are often more extreme than the correct answer.

Paragraph Comprehension

The four question types

  1. Main idea or author's purpose: what the passage as a whole is about.
  2. Detail: a fact stated directly in the text.
  3. Inference: a small, necessary conclusion the text supports.
  4. Vocabulary in context and tone: what a word means here, or how the author feels.

Method

Read the passage once at a normal pace for the gist, then read the stem and locate the relevant lines. For main idea questions, check the topic sentence (often first or last) and test your answer against every paragraph. If it only fits one paragraph, it is a detail, not the main idea. For vocabulary in context, substitute each option back into the sentence and see which preserves the meaning.

Traps

  • True statements the passage never makes. Every answer must be traceable to the text.
  • Extreme wording: always, never, all, proves. These are usually wrong on inference and tone items.
  • A detail offered as the main idea, or a broad summary offered for a detail question.
  • Answering from outside knowledge instead of the passage.
  • Misreading stems that contain EXCEPT or NOT.

Worked example

Passage: Desert plants conserve water in several ways. Some store it in thick stems. Others have small or waxy leaves that limit evaporation. A few drop their leaves entirely during drought.

Question: what is the main idea? Desert plants have multiple water-saving adaptations fits all three sentences. Some desert plants drop their leaves is a detail, and deserts are the driest biome is outside the text.

Mathematics Knowledge

Content map

Mathematics Knowledge is straight computation: fractions and decimals, percents, exponents and roots, order of operations, factoring, linear equations and inequalities, systems of equations, quadratics, and geometry covering angles, triangles, the Pythagorean theorem, circles, area, and volume.

Traps

  • Order of operations: exponents before multiplication, multiplication before addition; work parentheses from the inside out.
  • Negative signs. Minus 3 squared is minus 9, but negative 3 in parentheses squared is positive 9. Subtracting a negative adds.
  • Distribution: 3(x - 4) = 3x - 12, not 3x - 4.
  • Percent change = (new - old) divided by old, times 100. A 25 percent increase means multiplying by 1.25.
  • Geometry: know radius versus diameter, and remember triangle area is one half base times height, where the height is perpendicular to the base.
  • Dividing an inequality by a negative number flips the sign.
  • Angle facts: angles in a triangle sum to 180 degrees, a straight line is 180, and vertical angles are equal.

Worked example

Solve 3(x - 4) = 2x + 5. Distribute: 3x - 12 = 2x + 5. Subtract 2x from both sides: x - 12 = 5. Add 12: x = 17. Check by substituting: 3(13) = 39 and 2(17) + 5 = 39. Substituting back is the fastest way to catch a sign slip or a distribution error.

Electronics Information

Core relationships

Voltage (V, volts) is electrical pressure; current (I, amperes) is the flow; resistance (R, ohms) opposes it. Ohm's law: V = IR. Power: P = VI, and by substitution P = I squared times R, or V squared divided by R. Energy in watt-hours equals watts times hours.

Circuits

  • Series: one path. Current is the same everywhere, voltage divides across the loads, and resistances add.
  • Parallel: multiple paths. Voltage is the same across each branch, current divides, and total resistance is less than the smallest branch.

Components

A resistor limits current; a capacitor stores charge in an electric field; an inductor stores energy in a magnetic field; a diode allows current in one direction only; a transistor amplifies or switches; a transformer changes AC voltage; a fuse or breaker opens the circuit on overload. AC reverses direction (household current), DC flows one way (batteries). Copper, silver, and aluminum conduct; rubber, glass, and plastic insulate.

Traps

  • Confusing power with energy; watt-hours, not watts, measure consumption.
  • Reversing the series and parallel rules.
  • Resistor color code order: black 0, brown 1, red 2, orange 3, yellow 4, green 5, blue 6, violet 7, gray 8, white 9.
  • Assuming a capacitor stores current rather than charge.

Worked example

A 12 V source across a 4 ohm resistor: I = V divided by R = 12 divided by 4 = 3 A. Power = V times I = 12 times 3 = 36 W.

Auto & Shop Information

Automotive essentials

The four-stroke cycle repeats intake, compression, power, exhaust. The power stroke follows the spark plug firing just after compression. Know the supporting systems: ignition (battery, coil, spark plugs), cooling (coolant, radiator, water pump, thermostat), lubrication (oil pump, filter), fuel delivery, and exhaust. The drivetrain runs clutch or torque converter, transmission, driveshaft, and differential. Brakes are hydraulic: master cylinder, lines, calipers or wheel cylinders, with disc brakes squeezing pads against a rotor. The battery starts the car, but once the engine runs the alternator powers the electrical system and recharges the battery.

Shop knowledge

Match the tool to the job: open-end and box-end wrenches, sockets and ratchets, a torque wrench for specified tightness, screwdrivers, pliers, hacksaw, files, taps and dies for cutting threads, and measuring tools such as the micrometer, caliper, and feeler gauge.

Traps

  • Mixing up the stroke order, or naming intake as the power stroke.
  • Believing the battery powers the car while the engine is running.
  • Cross-threading bolts, or over-tightening without a torque specification.
  • Mixing metric and SAE sizes.
  • Safety items: eye protection, disconnecting power before electrical work, and never using a wrench as a hammer.

Rule of thumb

Right tool, right size, right torque. A wrench that fits snugly prevents rounded bolt heads, the most common avoidable shop error.

Mechanical Comprehension

The six simple machines

Lever, pulley, wheel and axle, inclined plane, wedge, and screw. Mechanical advantage is output force divided by input force; it multiplies force at the cost of distance.

  • Levers: first class has the fulcrum between load and effort (seesaw); second class has the load between (wheelbarrow); third class has the effort between (rake). Balance: effort times effort arm equals load times load arm.
  • Pulleys: a fixed pulley changes direction only and has a mechanical advantage of 1. Each additional rope segment supporting a movable pulley adds 1, so count the ropes pulling up on the moving block.
  • Gears: meshing gears turn in opposite directions, and the gear ratio equals the ratio of teeth.
  • Pressure equals force divided by area, so a small area creates high pressure, which is why a sharp knife cuts.

Other concepts

Friction opposes motion and lowers real mechanical advantage. Hydraulic systems transmit pressure equally in all directions, so a larger output piston gives a force advantage. An object floats when it displaces its own weight in fluid, and stability depends on the center of gravity.

Traps

  • Counting the rope you pull instead of the ropes holding the load.
  • Assuming connected gears turn the same way.
  • Confusing pressure with force when area changes.
  • Forgetting that friction makes real machines less efficient than the ideal calculation.

Worked example

A 10 lb weight sits 2 ft from a fulcrum. To balance it with an effort 4 ft from the fulcrum: 10 times 2 = effort times 4, so effort = 5 lb.

ASVAB cheat sheet

Quick reference

General Science (GS)

  • Cell theory states that all living things are made of cells, cells are the basic unit of life, and new cells arise from existing cells.

  • Photosynthesis: 6CO2 + 6H2O + light energy -> C6H12O6 + 6O2; this process occurs in chloroplasts and stores energy in glucose.

  • Atomic number equals the number of protons; mass number equals protons plus neutrons; isotopes have the same protons but different neutrons.

  • pH scale runs from 0 to 14: below 7 is acidic, 7 is neutral, and above 7 is basic; each unit is a tenfold change in hydrogen-ion concentration.

  • Igneous rock forms from cooling magma or lava; sedimentary rock forms from compacted or cemented sediments; metamorphic rock forms from heat and pressure.

  • Water cycle processes include evaporation, condensation, precipitation, runoff, and transpiration.

  • Arteries carry blood away from the heart; veins carry blood toward the heart; capillaries are thin exchange vessels.

  • Newton's first law: an object at rest or in uniform motion stays that way unless acted on by a net external force.

Quick reference

Arithmetic Reasoning (AR)

  • Percent: part = percent × whole; convert the percent to a decimal before multiplying.

  • Percent change = (new value − old value) / old value × 100; a negative result is a decrease.

  • Average = sum / count; total = average × count.

  • Distance = rate × time; rate = distance / time; time = distance / rate.

  • Simple interest: I = P × r × t, where r is the annual rate as a decimal and t is time in years.

  • Work rates: combined rate = sum of individual rates; time together = 1 / (1/a + 1/b).

  • Proportion: a/b = c/d implies ad = bc; use matching units on each side.

  • Mixture problems: amount of solute = concentration × total volume; conserve solute totals when combining solutions.

Quick reference

Word Knowledge (WK)

  • Prefix pre- means before; post- means after; anti- means against; pro- means for or forward.

  • Suffix -ology means study of; -ism means practice or doctrine; -able means capable of; -less means without.

  • Definition context clues often follow a comma, dash, the word or, or the phrase that is.

  • Contrast clues use but, although, however, or unlike to signal an opposite meaning nearby.

  • Roots: bene = good, mal = bad, ver = truth, aud = hear, cred = believe, chron = time, bio = life, geo = earth.

  • Word charge positive, negative, or neutral narrows answer choices when the sentence tone is clear.

  • Homophones: affect is usually a verb, effect is usually a noun; accept means receive, except means exclude.

  • Synonyms have similar meanings; antonyms have opposite meanings; eliminate choices that do not match the sentence's logic.

Quick reference

Paragraph Comprehension (PC)

  • Main idea is the central point about the topic; supporting details explain or prove it, and it is often stated near the beginning or end.

  • Inference is a conclusion supported by text details but not directly stated; it must stay close to the passage.

  • Tone is the author's attitude, revealed by word choice, imagery, and sentence structure.

  • Fact is verifiable with evidence; opinion is a judgment, belief, or feeling and often uses evaluative words.

  • Sequence clues include first, then, next, finally, before, after, and dates.

  • Compare/contrast signal words include similarly, unlike, whereas, on the other hand, and both.

  • Cause/effect signal words include because, due to, therefore, as a result, and consequently.

  • Author's purpose is commonly to inform, persuade, entertain, or explain; content and language identify the primary purpose.

Quick reference

Mathematics Knowledge (MK)

  • Slope-intercept form: y = mx + b; slope m = (y2 − y1)/(x2 − x1).

  • Area: rectangle = lw; triangle = 1/2 bh; circle = πr²; circumference = 2πr.

  • Volume: rectangular prism = lwh; cylinder = πr²h; sphere = 4/3 πr³.

  • Pythagorean theorem: a² + b² = c² for a right triangle, where c is the hypotenuse.

  • Quadratic formula: x = [−b ± √(b² − 4ac)] / (2a) for ax² + bx + c = 0, a ≠ 0.

  • Exponent rules: x^a x^b = x^(a+b); (x^a)^b = x^(ab); x^0 = 1 for x ≠ 0; x^−a = 1/x^a.

  • Common conversions: 1/2 = 0.5 = 50%; 1/4 = 0.25 = 25%; 3/4 = 0.75 = 75%.

  • Mean = sum/count; median = middle value when ordered; mode = most frequent value.

Quick reference

Electronics Information (EI)

  • Ohm's law: V = IR; I = V/R; R = V/I.

  • Power: P = VI; P = I²R; P = V²/R.

  • Series circuit: R_total = R1 + R2 + ...; current is the same; voltage divides.

  • Parallel circuit: 1/R_total = 1/R1 + 1/R2 + ...; voltage is the same; current divides.

  • Resistor color code: black 0, brown 1, red 2, orange 3, yellow 4, green 5, blue 6, violet 7, gray 8, white 9; gold ±5%, silver ±10%.

  • Capacitor stores energy in an electric field; unit is the farad; it blocks steady DC and passes AC.

  • Inductor stores energy in a magnetic field; unit is the henry; it opposes changes in current.

  • AC frequency in the United States is 60 Hz; DC has constant polarity; a diode allows current mainly in one direction.

  • Digital logic: AND is true only when all inputs are true; OR is true when any input is true; NOT inverts the input.

Quick reference

Auto & Shop Information (AS)

  • Four-stroke engine cycle: intake, compression, power, exhaust; the spark plug ignites the compressed air-fuel mixture in a gasoline engine.

  • Engine oil lubricates, cools, cleans, and seals; check level with the dipstick on a level surface with the engine off.

  • Battery stores chemical energy; the alternator charges the battery and powers electrical systems while the engine runs.

  • Hydraulic brakes transmit pressure through fluid; disc brakes use calipers and pads; drum brakes use shoes.

  • Coolant/antifreeze raises the boiling point and lowers the freezing point; never open a hot radiator.

  • Tire rotation promotes even wear; alignment adjusts camber, caster, and toe; balancing reduces vibration.

  • A fuse protects a circuit by melting when current exceeds its rating; replace it with the same rating and never bypass it.

  • Manual transmission: the clutch disengages the engine from the transmission during gear changes.

  • Shop safety: disconnect power before repair, use personal protective equipment, and keep flammables away from sparks.

Quick reference

Mechanical Comprehension (MC)

  • Mechanical advantage = output force / input force; for a lever it also equals effort arm / load arm.

  • Lever classes: first class has fulcrum between effort and load; second class has load between; third class has effort between.

  • Pulley: a fixed pulley changes direction but gives no mechanical advantage; a movable pulley has MA = 2; a block and tackle has MA = number of supporting ropes.

  • Inclined plane MA = length / height; a wedge is a moving inclined plane; a screw is an inclined plane wrapped around a cylinder.

  • Gear ratio = driven gear teeth / driver gear teeth; a larger driven gear turns slower and delivers more torque.

  • Pressure = force / area; in a hydraulic press, force ratio equals piston area ratio.

  • Work = force × distance; power = work / time; the unit of power is the watt.

  • Efficiency = output work / input work × 100%; it is never greater than 100%.

  • Torque = force × lever arm distance measured perpendicular to the force.

ASVAB key terms

Photosynthesis

The process by which green plants use sunlight, water, and carbon dioxide to make sugar and release oxygen. Chlorophyll in the leaves captures the light energy that drives the reaction.

Related: Ecosystem
Kinetic energy

The energy an object has because it is moving. It increases with both mass and speed, so a heavier or faster object carries more of it.

Related: Friction
Atom

The smallest unit of an element that still has that element's properties. It consists of a nucleus of protons and neutrons surrounded by electrons.

Related: Conductor
pH

A scale from 0 to 14 that describes how acidic or basic a solution is. Below 7 is acidic, 7 is neutral, and above 7 is basic.

Related: Ecosystem
Ecosystem

All the living things in an area plus the nonliving surroundings they interact with, such as soil, water, and climate. Energy and nutrients cycle among these parts.

Related: Photosynthesis
Percent

A way of expressing a number as a part of 100. For example, 25 percent means 25 out of every 100, or one quarter of the whole.

Related: Ratio, Proportion
Ratio

A comparison of two quantities by division, often written as a fraction or with a colon. It tells how much of one thing there is for each unit of another.

Related: Proportion, Rate
Mean (average)

The arithmetic average: add all the values in a set and divide by how many values there are. It is one way to describe the center of a data set.

Related: Ratio
Rate

A ratio that compares two quantities with different units, such as miles per hour or dollars per pound. It tells how one quantity changes relative to another.

Related: Ratio, Unit conversion
Unit conversion

Changing a measurement from one unit to another without changing its value, usually by multiplying by a fraction equal to one, such as 12 inches over 1 foot.

Related: Ratio, Rate
Proportion

An equation stating that two ratios are equal. Solving one usually means finding a missing value in a comparison, such as 3/4 = x/12.

Related: Ratio, Percent
Synonym

A word that means the same as, or nearly the same as, another word. For example, 'big' and 'large' are synonyms.

Related: Antonym, Connotation
Antonym

A word that means the opposite of another word. For example, 'hot' is an antonym of 'cold,' and 'expand' is an antonym of 'shrink.'

Related: Synonym
Prefix

A word part attached to the front of a root or base word that changes its meaning, such as 'un-' in 'unfair' or 'pre-' in 'preview.'

Related: Context clue
Context clue

Information in the words and sentences around an unfamiliar word that helps you figure out its meaning, such as a definition, example, contrast, or cause-and-effect relationship.

Related: Inference, Prefix
Connotation

The feelings or associations a word suggests beyond its dictionary meaning. 'Cheap' and 'inexpensive' have similar meanings but very different connotations.

Related: Synonym, Tone
Main idea

The central point a paragraph or passage is trying to make. Other sentences usually support or explain it, and it is often stated in a topic sentence.

Related: Supporting detail, Inference
Inference

A conclusion you reach by combining details in a passage with what you already know. It is not stated directly but is strongly suggested by the text.

Related: Main idea, Context clue
Supporting detail

A fact, example, statistic, or reason that backs up the main idea of a passage. Details answer questions like who, what, when, where, or why.

Related: Main idea
Tone

The writer's attitude toward the subject, revealed through word choice and details. It might be serious, humorous, sarcastic, objective, or critical.

Related: Connotation, Main idea
Variable

A letter or symbol that stands for an unknown or changing number in an expression or equation, such as x in 3x + 5 = 20.

Related: Order of operations
Exponent

A small number written above and to the right of a base that tells how many times the base is multiplied by itself. In 2 to the third power, the exponent 3 means 2 x 2 x 2.

Related: Order of operations, Prime number
Prime number

A whole number greater than 1 whose only positive factors are 1 and itself. Examples include 2, 3, 5, 7, and 11; the number 1 is not prime.

Related: Exponent
Order of operations

The agreed sequence for evaluating an expression: parentheses first, then exponents, then multiplication and division left to right, then addition and subtraction left to right.

Related: Exponent, Variable
Slope

A measure of how steep a line is, found by dividing the vertical change by the horizontal change between two points. It describes the line's rate of change.

Related: Ratio, Rate
Area

The amount of surface a flat shape covers, measured in square units such as square inches or square meters. Formulas differ by shape, such as length times width for a rectangle.

Related: Pressure
Voltage

The electrical pressure that pushes charges through a circuit, measured in volts. A higher voltage can push more current through the same amount of resistance.

Related: Current, Resistance, Ohm's law
Current

The flow of electric charge through a conductor, measured in amperes. It is the rate at which charge moves past a point in a circuit.

Related: Voltage, Ohm's law
Resistance

The opposition to the flow of electric current in a material, measured in ohms. More resistance means less current for a given voltage.

Related: Ohm's law, Conductor
Ohm's law

The relationship stating that voltage equals current times resistance. If you know any two of these three values, you can calculate the third.

Related: Voltage, Current, Resistance
Series circuit

A circuit in which components are connected end to end so the same current flows through each one. If one part breaks, the whole circuit stops working.

Related: Current, Resistance
Conductor

A material that lets electric charge flow through it easily, usually because it has loosely held electrons. Copper and aluminum are common examples.

Related: Resistance, Current
Torque

A twisting force that tends to rotate an object, calculated as force times the distance from the pivot. Mechanics measure it in pound-feet or newton-meters.

Related: Gear ratio, Mechanical advantage
Gear ratio

The comparison of the number of teeth on a driving gear to the number on a driven gear. It determines the changes in speed and turning force.

Related: Torque, Mechanical advantage
Four-stroke cycle

The sequence an internal combustion engine repeats: intake, compression, power, and exhaust. The piston moves down and up twice to complete one full cycle.

Related: Torque
Micrometer

A precision measuring tool with a calibrated screw used to measure small thicknesses or diameters, often to the nearest thousandth of an inch or hundredth of a millimeter.

Mechanical advantage

The number of times a machine multiplies the force you apply. It equals the output force divided by the input force, or effort distance divided by resistance distance.

Related: Lever, Friction
Pressure

Force applied over a given area, measured in units such as pounds per square inch. The same force creates more pressure when concentrated on a smaller area.

Related: Area, Mechanical advantage
Friction

A force that resists motion when two surfaces touch and slide or try to slide past each other. It converts some of the motion into heat.

Related: Mechanical advantage, Torque
Lever

A rigid bar that pivots on a fixed point called a fulcrum. Levers multiply force or increase speed depending on where the load and effort are placed.

Related: Mechanical advantage, Torque

ASVAB study plan

8 weeks · About 6 hours per week

Week 1

General Science (GS) & Word Knowledge (WK)

  • Take one full-length timed practice test and record a raw score for all eight domains to set per-domain targets.

  • Build a 120-card General Science deck covering life science, earth and space science, chemistry, and physics.

  • Write 50 vocabulary cards, each pairing the word with a definition and an original sentence that uses it.

  • Rework every missed General Science question from the baseline test and write a one-line reason the correct answer is right.

Your checkpoint

A baseline score sheet listing all eight domain scores plus a 170-card deck (120 General Science, 50 Word Knowledge) reviewed at least twice.

Week 2

General Science (GS) & Mathematics Knowledge (MK)

  • Drill the General Science deck to at least 85% recall on two consecutive self-quizzes.

  • Write a one-page formula sheet covering percents, ratios, exponents, and basic geometry.

  • Solve 60 Mathematics Knowledge practice items without a calculator and tag each miss by error type.

  • Review 10 vocabulary cards daily using spaced repetition.

Your checkpoint

A one-page formula sheet plus a log of 60 solved Mathematics Knowledge items with error types marked.

Week 3

Mathematics Knowledge (MK) & Arithmetic Reasoning (AR)

  • Solve 80 Mathematics Knowledge items across algebra, geometry, and number properties with no calculator.

  • Translate 40 arithmetic word problems into an equation before computing anything.

  • Recite from memory the formulas for circle area and circumference, triangle area, and rectangle and cylinder volume.

  • Continue 10 vocabulary cards daily to protect the vocabulary gains from weeks 1 and 2.

Your checkpoint

A 40-problem word-problem set in which every problem shows the equation written before the arithmetic.

Week 4

Arithmetic Reasoning (AR) & Mathematics Knowledge (MK)

  • Complete three timed Arithmetic Reasoning sets of 15 to 20 questions and record both accuracy and time per question.

  • Solve mixed ratio, rate, work, and percent-change problems until accuracy holds at 80% or better.

  • Retake a timed Mathematics Knowledge section and compare the score to the week 2 baseline.

  • List the five error patterns that caused the most missed problems and write a fix for each.

Your checkpoint

A tracking sheet showing Mathematics Knowledge score change from baseline and Arithmetic Reasoning accuracy plus time per question across three timed sets.

Week 5

Word Knowledge (WK) & Paragraph Comprehension (PC)

  • Grow the vocabulary deck to 200 words, adding a synonym and an antonym to each entry.

  • Practice context-clue strategy on 100 words presented inside sentences.

  • Read five short nonfiction passages and write a one-sentence main idea for each.

  • Answer 40 Paragraph Comprehension questions and label each wrong answer as main idea, detail, inference, or vocabulary in context.

Your checkpoint

A 200-word vocabulary deck plus a labeled error log covering 40 Paragraph Comprehension questions.

Week 6

Electronics Information (EI) & Mechanical Comprehension (MC)

  • Diagram series and parallel circuits and compute resistance and current using Ohm's law.

  • Memorize the schematic symbols for 20 common electronic components.

  • Work out mechanical advantage for levers, pulleys, and inclined planes with fully shown calculations.

  • Solve 50 Electronics Information and 40 Mechanical Comprehension practice items.

Your checkpoint

A 20-symbol reference sheet plus worked solutions for 10 circuit problems and 10 mechanical-advantage problems.

Week 7

Auto & Shop Information (AS) & Electronics Information (EI)

  • Identify 30 hand tools and 15 power tools by name, function, and safe use.

  • Explain the four-stroke engine cycle and the purpose of the major automotive systems.

  • Match 25 automotive parts to their functions.

  • Re-work the Electronics Information items missed in week 6 until each is answered correctly twice.

Your checkpoint

A 45-item tool-and-parts identification log, self-quizzed to at least 90% accuracy.

Week 8

General Science (GS) & Arithmetic Reasoning (AR) & Word Knowledge (WK) & Paragraph Comprehension (PC) & Mathematics Knowledge (MK) & Electronics Information (EI) & Auto & Shop Information (AS) & Mechanical Comprehension (MC)

  • Take two full-length timed practice tests under exam conditions.

  • Review every missed item from both tests and add 30 new cards covering those gaps.

  • Re-drill all decks to at least 90% recall.

  • Write a one-page test-day plan covering pacing per section, when to guess, and the order you will work.

Your checkpoint

Two completed full-length practice tests with scores recorded and a one-page test-day plan.

Milestones

Week 2: General Science deck at 85% recall on two consecutive quizzes and a one-page math formula sheet completed.

Week 4: At least 80% on a timed Mathematics Knowledge section and Arithmetic Reasoning averaging 90 seconds or less per question.

Week 6: Circuit and mechanical-advantage worked solutions complete, with 20 schematic symbols recalled from memory.

Week 8: Two full-length timed tests taken, all eight domain scores recorded, and every deck at 90% recall or better.

ASVAB exam day

Your checklist

Government-issued photo ID

Bring an original, unexpired ID such as a driver's license, passport, or state ID. The name must match your registration. Confirm accepted forms and whether a second ID is required with your recruiter or test coordinator. needs_review for any secondary ID requirement.

Social Security card or number

Often needed for military processing, but requirements vary by session. Confirm with your recruiter or test coordinator whether you must bring the card or just know the number. needs_review.

Appointment or registration confirmation

Bring a printed or saved confirmation if one was issued, plus the test site address, check-in time, and a contact phone number. Confirm what your provider actually requires.

Test-site logistics plan

Confirm parking, building entrance, security screening, and arrival time. Plan to arrive early enough to check in without rushing, and confirm the site's late-arrival policy.

Comfortable clothing and layers

Wear comfortable clothing and follow any dress code from the test site. A light layer helps with room temperature. Confirm any dress-code rules in advance. needs_review if you are unsure.

Glasses, contacts, or hearing aids if needed

Bring any vision or hearing aid you normally use. Tell the proctor about accommodations before the test. Confirm accommodation procedures with the provider in advance.

Allowed snack and water

Confirm the site's food and drink policy before bringing anything. Eat a normal breakfast even if snacks are not allowed in the testing room. needs_review.

Prohibited-items plan

Leave calculators, notes, phones, smartwatches, and other unauthorized electronics at home or store them exactly as directed. Confirm the current prohibited-items list with the provider.

Writing materials only if instructed

Do not bring your own scratch paper or pencil unless the provider tells you to. Confirm whether the test site supplies writing materials. needs_review.

Medication or medical-break plan

If you take prescription medication or may need a medical break, confirm the procedure with the test coordinator before test day. Do not improvise at the site. needs_review.

Sleep and transportation backup

Set alarms, arrange your ride or transit, and identify a backup plan. Being rested and on time matters more than last-minute cramming.

Plan the day

Final 72 hours

Confirm test date, arrival time, location, ID and document requirements, and prohibited-item policy with your recruiter or test coordinator. Write down the contact number.

Final 72 hours

Check whether your test is computer-adaptive or paper-and-pencil, and review the section order and timing from official instructions.

Final 72 hours

Take one short timed practice set, then stop heavy study. Focus on pacing and directions rather than trying to learn new content.

Final 72 hours

Plan transportation and a backup route. Check traffic, weather, parking, or transit schedules so you know exactly how you will arrive.

24 hours before

Pack your ID, confirmation, glasses or contacts, hearing aids, and any allowed snack or water. Lay out comfortable clothes.

24 hours before

Confirm food and drink rules, medication procedures, and break policies. Prepare only what is allowed.

24 hours before

Do a light review of test directions and your pacing strategy. Avoid cramming and avoid staying up late.

24 hours before

Set two alarms, aim for a full night's sleep, and avoid alcohol or unusual late caffeine.

Morning of

Eat a normal breakfast and hydrate. Avoid trying new foods or energy drinks before the test.

Morning of

Arrive at the instructed time, allowing extra time for check-in and security. Bring only allowed items.

Morning of

Turn off your phone and smartwatch and store them as directed. Use the restroom before the test starts.

During the test

Listen to proctor instructions, read each question carefully, and use scratch paper only if it is allowed and provided.

During the test

Pace yourself. If the format does not allow returning to previous questions, answer each item carefully as it comes; confirm the format rules before you begin.

During the test

If you must guess, answer every item if the format allows. ASVAB scoring is generally based on correct answers with no separate penalty for wrong answers, but confirm current official policy.

During the test

Raise your hand for breaks, illness, or equipment problems. Do not leave the room without permission.

Rules to check

  • Bring a valid, unexpired government-issued photo ID with a name matching your registration. Confirm accepted forms and any secondary ID requirement with the test coordinator.

  • Follow the prohibited-items list: no phones, smartwatches, calculators, notes, or unauthorized electronics in the testing room. Store or turn off items exactly as directed.

  • Arrive on time. Late arrival may result in denial or rescheduling, so confirm the site's late-arrival policy in advance.

  • Do not cheat, talk during the test, or share test content. Follow all proctor instructions and test-security rules.

  • Breaks are controlled by the proctor. Ask before leaving your seat; unauthorized breaks may end your session. Confirm the break policy for your test site.

  • Calculators are not allowed on the ASVAB. Confirm whether scratch paper or a pencil is provided and use only approved materials.

  • The ASVAB is not pass/fail. Your AFQT and line scores are derived from specific subtests, and each service sets its own requirements. Confirm score use and validity with your recruiter.

  • If you need a medical accommodation, prescription medication, or a break for a medical condition, arrange it with the provider before test day. Do not improvise at the site.

ASVAB FAQ

How many ASVAB practice questions are available?

The practice set has 200 ASVAB questions. Each one includes the choices, the correct answer, and an explanation, and the set is free to read with no signup.

How many ASVAB flashcards are available?

The flashcard set has 32 ASVAB cards. Each card shows the term and its definition.

Which topics does the ASVAB study material cover?

The ASVAB study material has 8 sections, including General Science, Arithmetic Reasoning, and Word Knowledge.

What format facts does the catalog list for the ASVAB exam?

The catalog lists these item types: multiple choice for the ASVAB exam.