TX Cosmetology Practice Test

Texas Cosmetology Operator License Examination

TX Cosmetology overview

  • 200 practice questions
  • 32 flashcards
  • 5 study guide topics
  • 40 key terms

What you'll study

  • Sanitation, Disinfection, and Safety20%
  • Hair Care and Haircutting20%
  • Nail Care20%
  • Skin Care20%
  • Texas Cosmetology Laws and Rules20%

The Texas Cosmetology Operator license is a Texas state credential administered under the Texas Department of Licensing and Regulation (TDLR), the agency that regulates barbering and cosmetology in Texas. TDLR states that its Barbering and Cosmetology rules and regulations focus on health, safety and sanitation with the aim of preventing cuts, burns, infections and the transmission of contagious diseases - so a candidate should expect the licensing exam to reflect that safety-first emphasis rather than styling trends alone. The credential is intended for people who want to work lawfully as cosmetology operators in Texas establishments, and the same TDLR program also licenses establishments, schools, and instructors, each with their own renewal and application paths. Preparation should combine classroom and practical training with close reading of the Texas laws and administrative rules that TDLR publishes, including its scope of practice guides and common code violation materials used in inspections. TDLR directs applicants to a dedicated Exam Information page, to out-of-state applicant guidance, and to student permit hour information; candidates should consult those official pages for current scheduling, fees, and scoring, because those details are not published on the pages summarized here. This study platform is independent and is not affiliated with TDLR.

Common mistakes

When a question asks how to handle reusable implements after a client, the candidate selects 'wash with soap and water and dry' or 'wipe with disinfectant spray' instead of cleaning then fully immersing in an EPA-registered hospital-grade disinfectant.

Everyday shop habits and everyday vocabulary blur 'clean,' 'sanitize,' and 'disinfect.' Candidates recognize the word 'clean' in an answer choice and stop reading.

What to do instead

Build a three-rung ladder and drill it until automatic: clean (soap and water, removes debris) then disinfect (EPA-registered hospital-grade, tuberculocidal, full immersion) then sterilize (autoclave, only for items that will penetrate skin). Any answer that stops at soap and water for a skin-contact implement is wrong.

The candidate answers a disinfection-time question with a memorized number of minutes instead of 'the contact time stated on the manufacturer's label.'

Study guides quote familiar round numbers, so the candidate anchors on a number and treats the label instruction as a vague non-answer.

What to do instead

Memorize the rule as a sentence, not a number: implements stay submerged for the full contact time on the product label. When a choice says 'per manufacturer's directions' or 'per label contact time,' treat it as the strong default answer for disinfection questions.

On scenario questions that ask what to do FIRST (blood spill, chemical in the eye, client reaction, broken tool), the candidate picks a later correct step - such as applying a bandage or disposing of waste - rather than the first action, which is usually to stop the service and protect yourself.

Candidates read the scenario, mentally jump to the dramatic middle of the event, and answer the question they imagined rather than the one worded on the page.

What to do instead

Before choosing, underline or silently repeat the qualifier (FIRST, NEXT, BEST, EXCEPT). For any exposure scenario, rank actions in this order: stop service, gloves/eye protection, remove the substance or control the hazard, then clean and disinfect, then dispose. Choose the earliest item in that chain.

The candidate picks the wrong elevation angle for a described haircut - answering 45 degrees for a uniformly layered cut, or 90 degrees for a graduated cut - because the angles were memorized as a list without the shape they produce.

Angles are abstract numbers with no visual anchor, so they get scrambled under time pressure.

What to do instead

Redraw a four-row table from memory until it is automatic: 0 degrees = blunt/one-length, 45 degrees = graduated, 90 degrees = uniform layers, 180 degrees = long layers. Sketch the finger position next to each angle and redo the table weekly.

The candidate mixes up texture, density, and porosity, giving 'high density' as the answer when the question describes hair that absorbs and releases moisture quickly, or answering that the medulla holds pigment when the question is about strength and color.

The terms are learned as a glossary block in one chapter, so they are stored together and retrieved interchangeably.

What to do instead

Convert each term into a test the candidate performs: density = how many hairs per square inch, texture = diameter of a single strand, porosity = how fast a strand takes in and holds water, elasticity = whether a wet strand stretches and returns. Also link structure to job: cuticle protects, cortex gives strength and holds color, medulla is often absent in fine hair.

For a whirlpool foot spa or pedicure basin, the candidate selects 'wipe the basin with disinfectant and dry' or 'rinse and refill' instead of the full drain, clean, fill with disinfectant solution, and circulate for the labeled contact time, then drain and dry.

The basin looks like a hard surface, so the candidate applies the implement or countertop rule. The exam tests a separate, more demanding protocol.

What to do instead

Study basins as their own category. Chain: drain and remove debris, clean all surfaces and the screen or jet parts, refill with disinfectant at label dilution, circulate for the full label contact time, drain and dry before the next client. If a choice mentions circulating solution through the unit, it is usually the right one.

The candidate treats methyl methacrylate (MMA) liquid monomer as an acceptable nail product as long as the room is ventilated, or fails to flag it when it appears in a scenario.

The candidate has seen MMA used informally in shops and reasons from observed practice instead of the rule, and the answer choice is often worded with a plausible 'if ventilated' condition.

What to do instead

Memorize the flat rule: MMA monomer is not permitted for use on clients. Ventilation never makes a prohibited product permissible. Any answer that allows MMA - 'only for tips,' 'only with gloves,' 'only if the client requests it' - is wrong.

On skin care questions the candidate recommends a thorough treatment (exfoliation, deep cleansing, waxing, extractions) for a client described with inflamed, irritated, recently treated, or retinoid/isotretinoin-using skin.

The candidate equates the best answer with the most active, most impressive service, and does not scan the scenario for the contraindication detail that changes the plan.

What to do instead

Read the client description first and mark any red flag (inflammation, broken skin, recent chemical peel, prescription retinoid or isotretinoin, sunburn, undiagnosed condition). A red flag means the answer is to decline, postpone, or refer - not to adapt the treatment. Practice by writing the contraindication list and matching each item to a service it rules out.

The candidate answers licensing questions from shop folklore - assuming cosmetology licenses need continuing education hours to renew, guessing the renewal cycle, or picking 'the health department' as the licensing agency.

Rules get repeated incorrectly in the workplace, and the candidate never checks the source, so the wrong version feels familiar on exam day.

What to do instead

Build and re-copy a one-page fact sheet from the Texas Department of Licensing and Regulation rules: agency name, the 1,000-hour operator training requirement, minimum age of 17, two-year license renewal, continuing education requirements as currently written, license displayed at the workstation, and the rule chapter citation. Re-verify each line against the official TDLR rules before the test rather than trusting memory.

When a question involves a service that approaches the edge of the license, the candidate chooses the most thorough or most profitable-sounding option - such as diagnosing a scalp or skin condition, treating a condition medically, or performing a service outside the licensed scope - instead of the option that stays in scope and refers out.

The candidate assumes the exam rewards the most complete service, when the rules reward the most conservative, in-scope action.

What to do instead

Adopt a scope filter: if an answer involves diagnosing, prescribing, or treating a disease, or performing a procedure the license does not cover, eliminate it before comparing the rest. The correct choice is typically to stop, refer to a physician or other licensed professional, and document.

Exam requirements can change. Confirm current details with the exam provider.

TX Cosmetology practice

200 questions. Each one lists the choices, the correct answer, and an explanation. With JavaScript, this list opens one question at a time. The checker at the top of this page saves progress in this browser when it is available.

  1. Question 1Sanitation, Disinfection, and Safety

    In a salon, what does sanitation mean?

    1. Removing visible dirt and debris from surfaces Correct answer.
    2. Sealing implements in a closed cabinet
    3. Destroying all microorganisms including spores
    4. Applying an EPA-registered hospital disinfectant

    Explanation

    Sanitation is the cleaning step: washing with soap and warm water, and using an abrasive cleaner when needed, to remove all visible dirt and debris. It does not kill microorganisms; that is the job of disinfection, and sterilization goes further still. Sanitation must always happen before an item is disinfected.

  2. Question 2Sanitation, Disinfection, and Safety

    What is the minimum length of time a cosmetologist should lather the hands and wrists when washing?

    1. 5 seconds
    2. 2 minutes
    3. 10 minutes
    4. 20 seconds Correct answer.

    Explanation

    Thorough handwashing with soap and warm running water requires about 20 seconds of lathering, cleaning under the nails and between the fingers. This is the single most effective way to prevent the spread of infection between clients. Hands should also be washed before gloving and immediately after gloves are removed.

  3. Question 3Sanitation, Disinfection, and Safety

    A disinfectant label states that the product is EPA-registered. What does this indicate?

    1. It may safely be combined with other chemicals
    2. It is approved for use on human skin
    3. It is registered with the federal agency that regulates disinfectant claims Correct answer.
    4. It has been proven to sterilize every implement

    Explanation

    The Environmental Protection Agency reviews and registers disinfectants, so the registration number shows the manufacturer's efficacy and safety claims have met federal requirements. Salons should use an EPA-registered hospital disinfectant that is bactericidal, virucidal, and fungicidal. Registration does not mean the product is safe for skin or may be mixed with other chemicals.

  4. Question 4Sanitation, Disinfection, and Safety

    Which item must be thrown away after use on a single client?

    1. Metal cuticle pusher
    2. Glass disinfectant jar
    3. Autoclave tray
    4. Wooden emery board Correct answer.

    Explanation

    Porous items such as wooden sticks, emery boards, foam buffers, and cotton cannot be reliably cleaned and disinfected, so they are used once and discarded. Nonporous metal and glass items can be cleaned, disinfected, and reused. Reusing a porous item risks transferring microbes between clients.

  5. Question 5Sanitation, Disinfection, and Safety

    What is the first protective step when cleaning up a blood spill?

    1. Put on disposable gloves Correct answer.
    2. Spray disinfectant directly on the hands
    3. Rinse the area with hot water only
    4. Wipe the area quickly with bare hands

    Explanation

    Blood and body fluids must never be contacted with bare hands; disposable gloves are put on before cleanup begins. The spill is then absorbed, the area cleaned with soap and water, and the surface disinfected according to the label. Hands are washed immediately after gloves are removed.

  6. Question 6Sanitation, Disinfection, and Safety

    Which practice is safe when using electrical equipment in a salon?

    1. Pulling the cord to unplug an appliance
    2. Running cords across a walkway
    3. Unplugging equipment by gripping the plug Correct answer.
    4. Using a hair dryer with wet hands

    Explanation

    Gripping the plug itself when disconnecting protects the cord from fraying and prevents a shock hazard. Cords should be kept away from water and traffic areas, and equipment should be inspected for damage before use. Pulling on the cord stresses the wiring and can expose conductors.

  7. Question 7Sanitation, Disinfection, and Safety

    What information does a Safety Data Sheet (SDS) provide?

    1. State licensing exam requirements
    2. Product hazards and safe handling Correct answer.
    3. The salon's appointment schedule
    4. The client's medical history

    Explanation

    An SDS is supplied by the manufacturer for each chemical product and summarizes its hazards, safe handling, first-aid measures, and spill response. Salons keep these sheets accessible for employees who work with the products. Reviewing the SDS helps staff choose the right protective equipment and respond correctly to accidents.

  8. Question 8Sanitation, Disinfection, and Safety

    A disinfectant label specifies a ten-minute contact time. This means implements must be:

    1. Rinsed after ten seconds of soaking
    2. Fully immersed for ten minutes Correct answer.
    3. Wiped once and allowed to air dry
    4. Soaked for ten minutes in plain water

    Explanation

    Contact time is the full period an item must remain wet and immersed in the disinfectant for the product to work as tested. Removing implements early allows surviving microorganisms to remain on the surface. The label's contact time, dilution, and temperature must all be followed.

  9. Question 9Sanitation, Disinfection, and Safety

    Which statement best describes disinfection?

    1. Removes only visible dirt and oil
    2. Freshens the air in the treatment room
    3. Destroys all microbial life including spores
    4. Kills most microbes but not spores Correct answer.

    Explanation

    Disinfection destroys or reduces most pathogenic microorganisms on hard, nonporous surfaces, but bacterial spores generally survive. Sterilization is the stronger process that destroys all microbial life, including spores. Cleaning, which removes visible debris, comes before either process.

  10. Question 10Sanitation, Disinfection, and Safety

    What must be done to an implement before it goes into the disinfectant solution?

    1. Sprayed with air freshener
    2. Washed, rinsed, and dried Correct answer.
    3. Rinsed in hot water and left wet
    4. Wiped once with a dry towel

    Explanation

    Implements must be scrubbed with soap and warm water, rinsed, and thoroughly dried before immersion, because organic residue and water dilute the disinfectant. Skipping this step lets debris shield microbes from the chemical. Only clean, dry implements go into the disinfecting jar.

  11. Question 11Sanitation, Disinfection, and Safety

    Why must a foam nail buffer be discarded rather than disinfected?

    1. Disinfectant dissolves the foam
    2. State law bans foam buffers
    3. Its porous surface shelters microbes Correct answer.
    4. Buffers cost too little to soak

    Explanation

    Porous materials absorb moisture and trap microorganisms in spaces the disinfectant cannot penetrate, so they cannot be reliably disinfected. Items such as foam buffers, wooden sticks, and cotton are therefore used once and discarded. Nonporous items are the ones that can be cleaned and disinfected for reuse.

  12. Question 12Sanitation, Disinfection, and Safety

    Quaternary ammonium compounds are best described as:

    1. Low-toxicity surface disinfectants Correct answer.
    2. Spore-killing sterilants
    3. Fumigants released into the air
    4. Corrosive acids for metal tools

    Explanation

    Quats are a large group of disinfectants that are generally non-toxic, non-corrosive, and well suited to nonporous salon surfaces and implements. They are not effective against bacterial spores and are not sterilants. Phenols are the group that is more corrosive and harsher on skin.

  13. Question 13Sanitation, Disinfection, and Safety

    What is the main hazard of phenol disinfectants?

    1. They can burn skin and damage eyes Correct answer.
    2. They evaporate into harmless vapor
    3. They are flammable at room temperature
    4. They sterilize by steam pressure

    Explanation

    Phenols are caustic and can injure skin, eyes, and mucous membranes, so gloves and eye protection are needed and the product must be used only as labeled. They are effective against a broad range of organisms, including tuberculosis bacteria, but that potency comes with handling risks. Containers should be kept closed and away from skin contact.

  14. Question 14Sanitation, Disinfection, and Safety

    For a blood spill on a hard floor, household bleach is commonly diluted at:

    1. 1 part bleach to 100 parts water
    2. 1 part bleach to 10 parts water Correct answer.
    3. No dilution; full strength
    4. 1 part bleach to 1 part water

    Explanation

    A roughly 1:10 dilution of household bleach in water is the standard concentration for disinfecting blood-contaminated hard surfaces after the spill has been absorbed and cleaned. Stronger solutions do not improve results and increase fume and corrosion hazards. The area is left wet for the required contact time.

  15. Question 15Sanitation, Disinfection, and Safety

    Universal precautions mean that the cosmetologist:

    1. Treats all blood and body fluids as infectious Correct answer.
    2. Disinfects tools once at the end of the day
    3. Wears gloves only if the client asks
    4. Treats only blood as infectious

    Explanation

    Under universal precautions every client's blood and body fluids are handled as if they carry infectious organisms, because a carrier may show no symptoms. This drives consistent glove use, handwashing, and tool processing for every service. Disinfection must occur after each client, not once a day.

  16. Question 16Sanitation, Disinfection, and Safety

    An autoclave destroys microorganisms using:

    1. Low-pressure chemical vapor
    2. Steam under pressure Correct answer.
    3. Dry heat at room temperature
    4. Ultraviolet light

    Explanation

    An autoclave uses pressurized steam at high temperature to sterilize implements, killing bacteria, viruses, fungi, and spores. Items must first be cleaned and dried, and the chamber must not be overloaded. Ultraviolet cabinets and ultrasonic units are not substitutes for sterilization.

  17. Question 17Sanitation, Disinfection, and Safety

    What is the purpose of an ultrasonic cleaner?

    1. Loosen debris before soaking Correct answer.
    2. Sharpen metal implements
    3. Sterilize implements completely
    4. Purify the air in the salon

    Explanation

    An ultrasonic unit uses sound waves to shake loose debris from small crevices, but it is a cleaning aid, not a disinfectant or sterilant. Implements still must be disinfected or sterilized afterward. Only items that have been cleaned can be effectively disinfected.

  18. Question 18Sanitation, Disinfection, and Safety

    After implements are disinfected and dried, they should be stored:

    1. In a clean, closed container Correct answer.
    2. Submerged in disinfectant indefinitely
    3. In a drawer with soiled towels
    4. In an open tray on the station

    Explanation

    Disinfected implements are kept in a clean, covered container so dust, hair, and splashes cannot recontaminate them. Open storage exposes them to the salon environment and cross-contamination. Leaving metal tools indefinitely in disinfectant can corrode or damage them.

  19. Question 19Sanitation, Disinfection, and Safety

    Bleach mixed with ammonia produces:

    1. Toxic chloramine gas Correct answer.
    2. A harmless cleaning foam
    3. A sterilizing solution
    4. A stronger disinfectant

    Explanation

    Bleach and ammonia react to release chloramine gas, which can cause severe respiratory injury, so the two must never be combined. Cleaning chemicals should be used exactly as labeled and never mixed casually. Salon work areas should also be ventilated when chemicals are in use.

  20. Question 20Sanitation, Disinfection, and Safety

    Towels and linens used during a service must be:

    1. Shared among family members
    2. Spritzed with disinfectant and reused
    3. Reused if they look clean
    4. Laundered after each client Correct answer.

    Explanation

    Linens contact skin, hair, and possibly body fluids, so they are used once and then laundered with detergent and hot water before reuse. Disinfectant spray does not substitute for laundering. Soiled linens are kept in a closed container away from clean supplies.

  21. Question 21Sanitation, Disinfection, and Safety

    A disinfectant labeled hospital-grade must be:

    1. Bactericidal, virucidal, and fungicidal Correct answer.
    2. Approved for use on skin
    3. Effective only when heated
    4. Able to destroy bacterial spores

    Explanation

    Hospital-grade products carry claims for killing bacteria, viruses, and fungi, and many also carry a tuberculocidal claim. Spore destruction is a sterilization claim and is beyond the definition of a disinfectant. These products are for surfaces and implements, not for skin.

  22. Question 22Sanitation, Disinfection, and Safety

    Which process is required to destroy bacterial spores?

    1. Soaking in quaternary ammonium
    2. Exposure to ultraviolet light
    3. Wiping with 70 percent alcohol
    4. Sterilization Correct answer.

    Explanation

    Bacterial spores are highly resistant and survive ordinary disinfection; only sterilization, such as autoclaving, reliably destroys them. Disinfectants reduce most pathogens but leave spores intact. This is why items that penetrate skin must be handled at the sterilization level where required.

  23. Question 23Sanitation, Disinfection, and Safety

    Adding extra water to a disinfectant concentrate beyond the label dilution will:

    1. Have no effect on killing power
    2. Weaken it below the effective concentration Correct answer.
    3. Improve penetration of porous tools
    4. Shorten the required contact time

    Explanation

    Disinfectants are tested and registered at specific dilutions, so over-diluting lowers the active ingredient below the level proven to kill pathogens. The label dilution, temperature, and contact time must all be followed exactly. More concentrated is not better either, since it increases chemical hazards without improving efficacy.

  24. Question 24Sanitation, Disinfection, and Safety

    A cuticle nipper nicks a client and contacts blood. What is the correct handling?

    1. Clean it, then soak in a hospital disinfectant Correct answer.
    2. Wipe it with 70 percent alcohol and continue the service
    3. Rinse it under running water and set it aside to dry
    4. Soak it in soapy water until the end of the day

    Explanation

    An implement contaminated with blood must be cleaned of all debris, dried, and then completely immersed in an EPA-registered hospital disinfectant for the label's contact time. Wiping or rinsing alone does not disinfect. The incident should also be documented and the client's skin cared for appropriately.

  25. Question 25Sanitation, Disinfection, and Safety

    Why must a disinfectant be kept in its original labeled container rather than an unlabeled spray bottle?

    1. Spray bottles cannot hold disinfectant
    2. Labels make the product work better
    3. Labels identify the product and its hazards Correct answer.
    4. Unlabeled bottles lose their strength

    Explanation

    Without a label, workers cannot confirm what the chemical is, how to dilute it, what protective equipment is needed, or what to do after an accidental exposure. Keeping products in labeled containers is a basic safety requirement in the salon. Secondary containers should always be labeled when product is transferred.

  26. Question 26Sanitation, Disinfection, and Safety

    At a minimum, how long should hands be lathered with soap during handwashing?

    1. 5 seconds
    2. 20 seconds Correct answer.
    3. 10 seconds
    4. 2 minutes

    Explanation

    Hands should be lathered with soap and warm running water for at least 20 seconds, covering palms, backs, between the fingers, and under the nails. This contact time is what allows soap to lift and rinse away soil and transient microorganisms.

  27. Question 27Sanitation, Disinfection, and Safety

    Which action is an example of cleaning rather than disinfecting?

    1. Placing shears in an autoclave
    2. Spraying a styling chair with a disinfectant
    3. Soaking nippers in a hospital-grade disinfectant
    4. Scrubbing a sink with soap and water Correct answer.

    Explanation

    Cleaning is the physical removal of visible soil, debris, and some microorganisms using soap and water or detergent. It must be done before disinfection, but by itself it does not kill pathogens.

  28. Question 28Sanitation, Disinfection, and Safety

    A cosmetologist has just mopped the salon floor and it is still visibly wet. What is the correct action?

    1. Mop only after the last client of the day has gone
    2. Place a wet-floor warning sign at the edge of the wet area Correct answer.
    3. Direct clients around the area without any signage
    4. Leave the floor to air-dry and warn clients verbally as they pass

    Explanation

    Wet floors are a leading cause of slips and falls in salons, so a visible warning sign must mark the hazard until the surface is dry. Verbal warnings or gestures alone do not reliably protect clients who are not looking at the floor.

  29. Question 29Sanitation, Disinfection, and Safety

    An electrical fire starts at a dryer station. Which extinguisher class is designed for energized electrical equipment?

    1. Class B
    2. Class D
    3. Class C Correct answer.
    4. Class A

    Explanation

    Class C extinguishers use nonconductive agents such as carbon dioxide or dry chemical, so they can be applied to energized electrical equipment without shocking the user. Water-based Class A extinguishers are unsafe on live circuits.

  30. Question 30Sanitation, Disinfection, and Safety

    What is the main limitation of 70% isopropyl alcohol as an implement disinfectant?

    1. It must be mixed with water before each use
    2. It evaporates quickly and is unreliable for soaking Correct answer.
    3. It leaves a sticky residue that must be scrubbed off
    4. It corrodes stainless steel on contact

    Explanation

    Alcohol flashes off rapidly, so it cannot maintain the wet contact time a disinfectant label requires, and it is neutralized by organic matter such as hair and skin debris. For these reasons it is not the preferred immersion disinfectant for implements.

  31. Question 31Sanitation, Disinfection, and Safety

    A nail technician finishes a service while wearing disposable gloves. What is the correct practice?

    1. Turn the gloves inside out and store them in a drawer
    2. Wash and dry the gloves for the next client
    3. Spray the gloves with disinfectant and remove them
    4. Discard the gloves, then wash hands Correct answer.

    Explanation

    Disposable gloves are single-use; they are removed and thrown away after each client, and hands are washed before and after. Gloves can develop tiny tears during a service, so hand hygiene is still required after removal.

  32. Question 32Sanitation, Disinfection, and Safety

    What is the correct way to describe an ultraviolet light cabinet used in a salon?

    1. It sanitizes but cannot be relied on to disinfect Correct answer.
    2. It disinfects any implement, including porous files
    3. It replaces chemical disinfection for nippers and shears
    4. It sterilizes implements if they are left in for 24 hours

    Explanation

    Ultraviolet cabinets reduce surface microorganisms but light does not reach every surface evenly, so the process is considered sanitizing only. Porous items cannot be disinfected by any method and must be discarded after use.

  33. Question 33Sanitation, Disinfection, and Safety

    After several clients, the disinfectant jar looks cloudy and contains hair clippings. What should the cosmetologist do?

    1. Add extra concentrate to strengthen the solution
    2. Discard it, clean the jar, mix fresh solution Correct answer.
    3. Top off the jar with fresh disinfectant
    4. Strain out the hair and keep using the solution

    Explanation

    Visible cloudiness or debris signals that organic soil has built up and is neutralizing the active ingredient, so the solution is no longer reliable. The jar must be emptied, washed and rinsed, dried, and refilled with a freshly mixed batch at the label dilution.

  34. Question 34Sanitation, Disinfection, and Safety

    A client arrives for a manicure with a red, swollen, oozing area around one nail. What should the technician do?

    1. Decline service and refer the client to a physician Correct answer.
    2. Disinfect the area thoroughly and continue the manicure
    3. Cover the area with a bandage and proceed with the manicure
    4. Wear two pairs of gloves and complete the service

    Explanation

    Redness, swelling, and drainage suggest a bacterial or fungal infection, which is a contraindication for service in a salon. The cosmetologist is not licensed to treat disease and should refer the client to a physician rather than work over the area.

  35. Question 35Sanitation, Disinfection, and Safety

    Single-use items that have contacted a client's blood should be:

    1. soaked in disinfectant overnight and reused once
    2. double-bagged and sealed in a labeled waste container Correct answer.
    3. rinsed in the sink and discarded with salon linens
    4. placed in the regular trash inside the service area

    Explanation

    Blood-contaminated disposable items are potentially infectious and must be placed in a sealed, labeled container for proper disposal, following bloodborne pathogen rules. They are never rinsed into the plumbing or reused.

  36. Question 36Sanitation, Disinfection, and Safety

    A technician washes a disinfectant jar with soap, rinses it once, and refills it with a quaternary ammonium solution. Why can residual soap film be a problem?

    1. It can inactivate the disinfectant's active ingredient Correct answer.
    2. It dilutes the solution beyond the label ratio
    3. It speeds up evaporation and shortens the solution's life
    4. It makes the solution too alkaline for stainless steel

    Explanation

    Quaternary ammonium compounds are cationic, and anionic soap residue can bind with and neutralize them, reducing germ-killing power. Jars and basins must be washed, thoroughly rinsed, and dried before a fresh solution is mixed.

  37. Question 37Sanitation, Disinfection, and Safety

    Why is a clean, single-use neck strip placed between the client's neck and the cape?

    1. It holds the cape fastened securely at the front
    2. It keeps the shared cape from touching the skin Correct answer.
    3. It protects the cape from bleach and tint stains
    4. It keeps the cape from absorbing spilled water

    Explanation

    A neck strip acts as a barrier so the reusable cape does not contact one client after another, which would transfer skin cells, oils, and possible pathogens. The strip is used once and discarded, while the cape is laundered or replaced between clients.

  38. Question 38Sanitation, Disinfection, and Safety

    A nail technician works with monomer liquid all day. Which control best limits exposure to its vapors?

    1. A fan that blows air across the table toward the client
    2. Opening a window on the far side of the salon
    3. Burning a scented candle near the station
    4. Local exhaust ventilation at the worktable Correct answer.

    Explanation

    Source-capture ventilation at the worktable removes vapors before they reach the technician's breathing zone, which is the most effective engineering control. General room air movement and masking scents only spread or hide the vapors.

  39. Question 39Sanitation, Disinfection, and Safety

    Which practice best reduces physical strain during a long day of haircutting?

    1. Leaning forward over the client to see the guide line
    2. Holding the shears in a tight, locked grip all day
    3. Setting chair height so wrists stay neutral Correct answer.
    4. Standing in one fixed position to keep the arms steady

    Explanation

    Adjusting the client's chair height and keeping the wrists in a neutral position keeps the body in proper alignment and reduces repetitive strain. Fixed posture, leaning, and a locked grip increase fatigue and the risk of musculoskeletal injury.

  40. Question 40Sanitation, Disinfection, and Safety

    Which statement about a whirlpool foot spa used for pedicures is correct?

    1. Cleaning and disinfecting the basin after every client Correct answer.
    2. Adding disinfectant to the soak water protects each client
    3. Draining and refilling the basin with water is enough
    4. The basin needs disinfecting only at day's end

    Explanation

    Pedicure equipment harbors debris and biofilm in the basin, screen, and impeller, so it must be cleaned and disinfected between clients following manufacturer instructions. Skipping this step can spread bacteria and fungi from one client to the next.

  41. Question 41Hair Care and Haircutting

    Which tool is used to remove bulk from a section without shortening the overall length?

    1. Thinning shears Correct answer.
    2. Blunt shears
    3. Straight razor
    4. Taper comb

    Explanation

    Thinning shears have one cutting blade and one comb-like blade, so they cut only a portion of the hairs in a section, reducing bulk while leaving length. They are used on interior sections, not on the perimeter line, and are not meant to create a visible line.

  42. Question 42Hair Care and Haircutting

    Cutting every subsection at zero-degree elevation produces which result?

    1. Uniform layers
    2. Graduated layers
    3. One-length blunt Correct answer.
    4. Long layers

    Explanation

    Zero-degree elevation means the hair is held flat against the head with no lift, so all hair arrives at the same cutting line. The result is a solid, one-length shape with a heavy perimeter and no interior layering.

  43. Question 43Hair Care and Haircutting

    What is the name of the first section that is cut and that sets the length for the rest of the haircut?

    1. Perimeter
    2. Cross-check
    3. Section
    4. Guideline Correct answer.

    Explanation

    A guideline, or guide, is the initial cut whose length and angle every following subsection is matched to. Without a clear guide, the shape drifts and the finished cut is unbalanced.

  44. Question 44Hair Care and Haircutting

    In what condition should hair be for razor cutting?

    1. Bone dry and curly
    2. Damp and uncombed
    3. Wet and lubricated Correct answer.
    4. Clean and blown out

    Explanation

    A razor requires a smooth, slick surface to glide; hair is therefore cut wet and coated with a lubricating product. Cutting dry hair with a razor drags, pulls, and produces a ragged, uneven edge.

  45. Question 45Hair Care and Haircutting

    Which partings divide the head into the standard four haircutting sections?

    1. Temple to temple, then crown to nape
    2. Nape upward to the crown, then side to side
    3. Front hairline to nape, ear to ear Correct answer.
    4. Ear to ear only, then nape to crown

    Explanation

    The standard four sections are made with a center parting from the front hairline to the nape and a parting from the top of one ear across the crown to the other ear. These partings give four workable quadrants that keep the cut balanced.

  46. Question 46Hair Care and Haircutting

    How does the clipper-over-comb technique work?

    1. Comb is used only to blend the nape
    2. Clippers shorten the comb teeth first
    3. Comb guides the shears, not the clippers
    4. Comb lifts hair and clippers cut over it Correct answer.

    Explanation

    The comb is placed flat against the head and lifted to the desired level; the clippers then travel across the comb's teeth, using the comb as a guide. This allows short, blended lengths to be created close to the scalp, such as in fades and taper cuts.

  47. Question 47Hair Care and Haircutting

    What is the purpose of texturizing a haircut?

    1. Adds length to the ends
    2. Removes bulk and adds movement Correct answer.
    3. Makes the perimeter heavier
    4. Sets hair in a shape

    Explanation

    Texturizing techniques such as point cutting and notching remove small amounts of hair from interior or end areas, which lightens the shape and lets the hair move. It does not change the overall length of the cut.

  48. Question 48Hair Care and Haircutting

    What is the purpose of a neck strip when a client is caped?

    1. It cushions the neck during shampooing
    2. A sanitary barrier at the skin Correct answer.
    3. It holds the cape closed at the front
    4. It marks the intended neckline length

    Explanation

    The neck strip is placed between the cape and the client's skin so the cape never touches the client directly. This satisfies the rule that a clean barrier be used for each client and keeps the cape from contacting skin or hair.

  49. Question 49Hair Care and Haircutting

    Which elevation produces a graduated shape?

    1. Graduated Correct answer.
    2. Blunt one-length
    3. Long layers
    4. Uniform layers

    Explanation

    Graduation is built at approximately 45 degrees of elevation, where each subsection is cut slightly shorter than the one below it. The stacked lengths create weight at the perimeter that tapers toward the crown.

  50. Question 50Hair Care and Haircutting

    A stylist directs hair forward to a guide at the front to preserve length along the perimeter. Which technique is being used?

    1. Sectioning
    2. Cross-checking
    3. Notching
    4. Overdirection Correct answer.

    Explanation

    Overdirection means combing the hair away from its natural position and into a stationary guide, which shifts weight and preserves length where the hair is directed. It is commonly used at the front hairline to keep a perimeter line longer.

  51. Question 51Hair Care and Haircutting

    What is the purpose of cross-checking a finished haircut?

    1. Testing tension before blending
    2. Removing excess bulk at the crown
    3. Verifying balance against the pattern Correct answer.
    4. Setting perimeter before layering

    Explanation

    Cross-checking means cutting or combing the hair in a direction opposite to the original pattern to confirm both sides match. Any discrepancy shows immediately, so the stylist can correct it before finishing.

  52. Question 52Hair Care and Haircutting

    In a layered cut, hair from each new subsection is combed up to the previous subsection and cut to match it. The previous subsection functions as a what?

    1. Traveling guide Correct answer.
    2. Perimeter guide
    3. Interior guide
    4. Stationary guide

    Explanation

    A traveling guide moves forward with the cut because each newly cut subsection becomes the reference for the next one. This is how layers stay continuous and evenly blended across the head.

  53. Question 53Hair Care and Haircutting

    A client has a strong cowlick at the front hairline. What is the best cutting approach?

    1. Leave extra length and follow the growth Correct answer.
    2. Straighten it chemically before cutting
    3. Cut that area last, against the growth
    4. Cut it shorter to pull it into line

    Explanation

    Hair that grows away from the rest of the section will stand up if cut to the same line, so extra length is left and the cut follows the natural direction of growth. Cutting it shorter only makes the pattern more obvious.

  54. Question 54Hair Care and Haircutting

    Why must tension be kept even while cutting a subsection?

    1. Uneven tension gives uneven lines Correct answer.
    2. Loose hair cuts faster
    3. Tension controls the elevation used
    4. Tension protects the blade edge

    Explanation

    Hair that is held slack or overstretched arrives at a different point on the cutting line, and it also springs back after release. Consistent, moderate tension keeps every subsection aligned with the guide.

  55. Question 55Hair Care and Haircutting

    What effect does a one-length blunt cut have on fine, straight hair?

    1. Makes it appear thinner
    2. Creates a fuller appearance Correct answer.
    3. Reduces the perimeter weight
    4. Adds visible soft texture

    Explanation

    A blunt cut places all the ends on a single solid line, so the perimeter looks denser. On fine hair this creates the impression of more mass and thickness.

  56. Question 56Hair Care and Haircutting

    Which statement describes slide cutting?

    1. Razor work only
    2. Chipping into the ends
    3. Sliding open shears down Correct answer.
    4. Cutting a flat line

    Explanation

    Slide cutting uses partially opened shears that are closed while sliding along the strand, removing length and blending in one motion. It is done on wet hair and is avoided where the hair is fragile or the line must stay solid.

  57. Question 57Hair Care and Haircutting

    How is point cutting performed?

    1. Razor slices through the ends
    2. Clippers cut over a comb
    3. Shears cut a flat line at the ends
    4. Shear tips cut down into the ends Correct answer.

    Explanation

    Point cutting inserts the tips of the shears vertically into the ends of a section, which softens the line and removes small amounts of weight. The effect is blending and movement rather than a solid edge.

  58. Question 58Hair Care and Haircutting

    Approximately how long does a number 2 clipper guard leave the hair?

    1. 1/4 inch Correct answer.
    2. 1/8 inch
    3. 3/8 inch
    4. 1/2 inch

    Explanation

    Guard numbers correspond to eighths of an inch, so a number 2 guard leaves about two eighths, or one quarter inch, of hair. A number 1 leaves 1/8 inch and a number 3 leaves 3/8 inch.

  59. Question 59Hair Care and Haircutting

    Which best describes a fade?

    1. A blunt line at the nape
    2. A layered top with a hard part
    3. One uniform length overall
    4. A gradual shorter-to-longer blend Correct answer.

    Explanation

    A fade tapers from very short hair at the hairline or nape upward into longer lengths, with no visible line of demarcation. The transition must be built gradually, often with clipper-over-comb and repeated guard changes.

  60. Question 60Hair Care and Haircutting

    Compared with shears, a razor used on wet hair tends to leave ends that are what?

    1. Heavier and thicker
    2. Softer and tapered Correct answer.
    3. Harder and more solid
    4. Shorter and rigid

    Explanation

    The razor slices at an angle along the strand, so each hair ends in a tapered point rather than a blunt cross-section. That tapering produces softer, more feathered ends and a lighter perimeter.

  61. Question 61Hair Care and Haircutting

    A stylist wants a solid back perimeter on a graduated bob while building weight in the interior. Which pairing is correct?

    1. 0 degrees at the perimeter, 45 degrees in the interior Correct answer.
    2. 45 degrees at the perimeter, 90 degrees in the interior
    3. 90 degrees at the perimeter, 45 degrees in the interior
    4. 45 degrees at the perimeter, 0 degrees in the interior

    Explanation

    The perimeter is cut at zero degrees so all ends fall on one solid line, and the interior subsections are then elevated to about 45 degrees to stack length and create graduation. Reversing the elevations lifts the perimeter and removes the solid edge.

  62. Question 62Hair Care and Haircutting

    How should hair with poor elasticity be handled during a haircut?

    1. Use minimal tension and sharp tools Correct answer.
    2. Razor cut it to soften the ends
    3. Stretch it firmly to control the line
    4. Cut it against the growth pattern

    Explanation

    Hair with poor elasticity stretches and does not return to its original length, so even moderate tension can leave the finished line uneven once the hair relaxes. Light tension and sharp implements minimize stress and keep the cut accurate.

  63. Question 63Hair Care and Haircutting

    Which elevation creates a long-layered shape while preserving the perimeter length?

    1. 45 degrees
    2. 0 degrees
    3. 90 degrees
    4. 180 degrees Correct answer.

    Explanation

    Long layers are cut at 180 degrees, with hair held up and over the top of the head so only the outermost layers are shortened. The hair near the perimeter is left at its original length, creating length with movement at the crown.

  64. Question 64Hair Care and Haircutting

    Which describes channel cutting?

    1. A straight slit cut into a section Correct answer.
    2. V-shaped snips along the ends
    3. Removing a wedge at the crown
    4. Clipper blending above the occipital

    Explanation

    Channel cutting removes a straight, narrow strip of hair from within a section, creating a hollow channel that reduces weight and allows movement. Notching, by contrast, uses V-shaped cuts along the ends.

  65. Question 65Hair Care and Haircutting

    A stylist notices that the shears fold and bend the hair instead of cutting it cleanly. What is the most appropriate first step?

    1. Adjust the tension screw slightly Correct answer.
    2. Oil the pivot with clipper oil
    3. Resharpen the blades by hand
    4. Replace the finger rest

    Explanation

    Shears that fold hair usually have blades that are not meeting properly because the pivot tension is too loose or too tight. A small adjustment to the tension screw restores the blade contact before any decision about sharpening is made.

  66. Question 66Hair Care and Haircutting

    Which reference point marks the highest point on the top of the head?

    1. Apex Correct answer.
    2. Nape
    3. Parietal ridge
    4. Occipital bone

    Explanation

    The apex is the highest point of the skull and is used when establishing length, balance, and sectioning in a haircut. The other landmarks sit lower on the head and serve different design purposes.

  67. Question 67Hair Care and Haircutting

    What is the primary purpose of thinning shears?

    1. To shorten the hair quickly before a precision cut
    2. To create a solid, blunt perimeter line
    3. To remove bulk without shortening the length Correct answer.
    4. To build a graduated weight line at the nape

    Explanation

    Thinning shears have one straight blade and one notched blade, so a single close cuts only part of the hair in a section. This reduces bulk and weight while leaving the overall length and outline intact.

  68. Question 68Hair Care and Haircutting

    Which hair property describes how many hairs grow per square inch of scalp?

    1. Density Correct answer.
    2. Elasticity
    3. Porosity
    4. Texture

    Explanation

    Density is the number of hairs per square inch of scalp, which tells the stylist how much hair is available in a given area. It influences how large the subsections should be for control during cutting.

  69. Question 69Hair Care and Haircutting

    Which term describes the angle at which a subsection is lifted away from the head before cutting?

    1. Elevation Correct answer.
    2. Cross-checking
    3. Distribution
    4. Sectioning

    Explanation

    Elevation, also called projection, is the angle at which hair is held away from the head and is the main control for where weight builds in a cut. Changing elevation changes the shape without changing the guide length.

  70. Question 70Hair Care and Haircutting

    A stylist holds every subsection at 90 degrees from the curve of the head, parallel to the floor, and cuts each to the same guide. Which shape results?

    1. Uniform layers Correct answer.
    2. Graduation
    3. Long layers
    4. A one-length bob

    Explanation

    At 90 degrees the hair is projected straight out from the head, so every layer ends up the same length and the shape is uniform all over. Lower elevations build weight, while elevations above 90 degrees create longer layers.

  71. Question 71Hair Care and Haircutting

    As a stylist works across the head, each new subsection is cut to the length of the section just completed, and the guide moves along with the cut. Which guideline is being used?

    1. Interior guideline
    2. Stationary guideline
    3. Perimeter guideline
    4. Traveling guideline Correct answer.

    Explanation

    A traveling guideline moves with the cut: the section just finished becomes the guide for the next one, so length follows the shape being built around the head. A stationary guideline, by contrast, stays fixed in one place throughout the cut.

  72. Question 72Hair Care and Haircutting

    Which texturizing method removes small V-shaped pieces from the ends of a subsection to create a chunkier, more separated finish?

    1. Slicing
    2. Notching Correct answer.
    3. Slithering
    4. Blunt cutting

    Explanation

    Notching uses the points of the shears to take small V-shaped bites out of the ends, leaving a visibly separated, chunkier edge. Techniques that slide along the strand produce softer, less defined ends.

  73. Question 73Hair Care and Haircutting

    Hair stretches when wet and returns to its resting length as it dries. What should a stylist remember when cutting wet hair?

    1. Wet hair must be cut shorter to allow for shrinkage
    2. Wet hair should be held at 45 degrees for accuracy
    3. Wet hair holds its shape well and needs no tension
    4. The finished length will look shorter once the hair dries Correct answer.

    Explanation

    Because wet hair is stretched, it snaps back to a shorter length as it dries, so a cut that looks correct on wet hair can finish shorter than expected. Stylists allow extra length and verify the result on dry hair.

  74. Question 74Hair Care and Haircutting

    What does the tension screw on a pair of professional shears control?

    1. The size of the finger rest
    2. The angle of the cutting edge
    3. The pressure between the blades Correct answer.
    4. The length of the cut

    Explanation

    The tension screw adjusts how firmly the two blades press together, which affects the smoothness of the cut and the wear on the tool. It should be checked regularly and adjusted with the correct tool so the shears neither bind nor fold the hair.

  75. Question 75Hair Care and Haircutting

    Which term describes gradually shortening the hair so that one area of a cut blends smoothly into another?

    1. Cross-checking
    2. Tapering Correct answer.
    3. Slithering
    4. Sectioning

    Explanation

    Tapering reduces length gradually across a section so it merges with the surrounding hair, as at a neckline or sideburn. It is a blending effect rather than a texturizing or preparation step.

  76. Question 76Hair Care and Haircutting

    Which cutting method holds the hair between the fingers and closes the shears straight across the subsection to produce a solid edge?

    1. Club cutting Correct answer.
    2. Slide cutting
    3. Freehand cutting
    4. Point cutting

    Explanation

    Club cutting, also called blunt cutting, closes the shears fully across a subsection held between the fingers, producing a solid straight line. It is the foundation of one-length and heavy perimeter shapes.

  77. Question 77Hair Care and Haircutting

    In the scissor-over-comb technique, what is the role of the comb?

    1. It creates a graduated weight line at the nape
    2. It lifts and holds the hair for the shears Correct answer.
    3. It measures the length against the last subsection
    4. It shields the scalp from the shear points

    Explanation

    The comb lifts and supports the hair at a chosen height so the shears can cut against the teeth, which allows short, close blending at areas like the nape and sides. The comb acts as the guide while the shears perform the cutting.

  78. Question 78Hair Care and Haircutting

    A stylist wants to lighten a thick, blunt cut without changing the perimeter line. Which approach is best?

    1. Thin interior sections away from the perimeter Correct answer.
    2. Slide-cut the perimeter at zero elevation
    3. Cut the perimeter shorter to release weight
    4. Razor the crown sections to release bulk

    Explanation

    Removing weight several inches away from the scalp and perimeter lightens the interior while the outer line stays solid and unchanged. Any technique applied directly on the perimeter or outline alters the visible shape.

  79. Question 79Hair Care and Haircutting

    A client with a strong wave pattern requests long layers. Why should the hair be cut in natural fall rather than over-directed?

    1. It prevents the ends from becoming blunt
    2. It lets the wave sit where it will fall when styled Correct answer.
    3. Overdirection causes the hair to grow back unevenly
    4. It keeps every subsection exactly the same length

    Explanation

    Cutting in natural fall means the hair is combed down in the direction it grows and dries, so the wave rests where it actually falls. Over-directing pulls the wave out of position, and the layers can look uneven once the hair dries and resumes its pattern.

  80. Question 80Hair Care and Haircutting

    A client with a flat crown and a prominent occipital bone wants a short cut that looks balanced. Which approach is best?

    1. Cut the crown shorter than the occipital bone area
    2. Add weight at the occipital, leave the crown longer Correct answer.
    3. Cut the entire head to one uniform length at the nape
    4. Use a short guard over the whole head for evenness

    Explanation

    Leaving extra length at the crown gives the hair something to build volume with, while weight at the prominent occipital bone smooths that transition and balances the profile. Cutting everything uniformly or too short emphasizes the flat area.

  81. Question 81Nail Care

    The nail plate is composed mainly of which protein?

    1. Melanin
    2. Collagen
    3. Elastin
    4. Keratin Correct answer.

    Explanation

    The nail plate is built from tightly packed, hardened keratinized cells produced by the matrix. Keratin is the same structural protein found in hair and the outer layers of skin.

  82. Question 82Nail Care

    Which structure produces the cells that become the nail plate?

    1. Nail bed
    2. Lunula
    3. Nail matrix Correct answer.
    4. Sidewall

    Explanation

    The matrix is the active growth area at the base of the nail, and the keratinized cells it produces harden and move forward to form the plate. Damage to the matrix can permanently alter the shape of the nail.

  83. Question 83Nail Care

    What is the whitish, half-moon-shaped area visible at the base of the nail called?

    1. Cuticle
    2. Nail fold
    3. Free edge
    4. Lunula Correct answer.

    Explanation

    The lunula is the pale, crescent-shaped section of the matrix seen through the nail plate at the base. It appears lighter because the cells there are not yet fully flattened and hardened.

  84. Question 84Nail Care

    Which implement is designed to gently push back the eponychium during a manicure?

    1. Nail nipper
    2. Nail pusher Correct answer.
    3. Curette
    4. Nail brush

    Explanation

    A nail pusher has a curved, spatula-like tip made to loosen and push back the eponychium without cutting it. It should be used gently and at a shallow angle to avoid damaging the matrix area.

  85. Question 85Nail Care

    The living skin that overlaps and protects the base of the nail plate is the:

    1. Nail root
    2. Lunula
    3. Eponychium Correct answer.
    4. Hyponychium

    Explanation

    The eponychium is the living skin at the base of the nail that overlaps the plate and helps seal out debris and microbes. The thin dead tissue that clings to the plate is the cuticle.

  86. Question 86Nail Care

    Redness, swelling and pus around the edge of a nail most likely indicate:

    1. Leukonychia
    2. Koilonychia
    3. Paronychia Correct answer.
    4. Onycholysis

    Explanation

    Paronychia is a bacterial infection of the skin folds around the nail, marked by redness, heat, swelling and pus. A cosmetologist should not perform a service on the inflamed area and should refer the client for medical care.

  87. Question 87Nail Care

    Which implement is used to shorten the free edge of the nail?

    1. Cuticle nipper
    2. Nail brush
    3. Nail clippers Correct answer.
    4. Nail buffer

    Explanation

    Nail clippers have curved cutting jaws sized to trim the free edge of fingernails or toenails cleanly. Cutting tools must be cleaned and disinfected after every client.

  88. Question 88Nail Care

    Which massage movement consists of light, continuous, gliding strokes along the arm?

    1. Tapotement
    2. Effleurage Correct answer.
    3. Friction
    4. Petrissage

    Explanation

    Effleurage uses slow, gliding strokes that follow the direction of the muscle fibers and is usually used to begin and end a massage. It relaxes the client and helps the technician assess the tissue.

  89. Question 89Nail Care

    On average, how fast do fingernails grow?

    1. About 1 inch per month
    2. About 1/8 inch per year
    3. About 1/8 inch per month Correct answer.
    4. About 1/2 inch per month

    Explanation

    Fingernails typically grow about 1/8 inch (roughly 3 mm) per month, and toenails grow more slowly. Growth is faster in summer, in younger people, and on the nails of the dominant hand.

  90. Question 90Nail Care

    A client has a deep horizontal groove in the nail plate that is growing out with the nail. What most likely caused it?

    1. A chronic fungal infection of the nail bed
    2. Filing the free edge in both directions
    3. An injury that halted matrix growth Correct answer.
    4. Improper use of a cuticle remover

    Explanation

    A horizontal depression that grows forward is a Beau's line, produced when a severe illness or injury temporarily stops matrix activity. Because the plate keeps growing, the groove moves outward with it over time.

  91. Question 91Nail Care

    Onychorrhexis is best described as:

    1. Split or brittle nails Correct answer.
    2. Thickening of the nail plate
    3. Separation of the nail plate from the bed
    4. An ingrown nail

    Explanation

    Onychorrhexis means abnormal brittleness with splitting and peeling of the nail plate, often linked to harsh chemicals, repeated wetting and drying, or excessive filing. Treatments focus on moisturizing and protecting the nail.

  92. Question 92Nail Care

    A nail plate that has loosened and separated from the nail bed without inflammation is called:

    1. Onychauxis
    2. Onycholysis Correct answer.
    3. Onychogryphosis
    4. Onychophagy

    Explanation

    Onycholysis is the painless detachment of the plate from the bed, often beginning at the free edge. It can follow trauma, aggressive cleaning under the nail, or certain skin conditions, and the exposed bed should be kept dry and protected.

  93. Question 93Nail Care

    Nails that are thin and curve upward like a spoon are described as:

    1. Leukonychia
    2. Onychatrophia
    3. Pterygium
    4. Koilonychia Correct answer.

    Explanation

    Koilonychia is a spoon-shaped nail with a concave surface, sometimes associated with iron deficiency or with occupational softening of the plate. It is a condition to note and refer, not to correct with product.

  94. Question 94Nail Care

    After a manicure on a client with a suspected nail infection, reusable metal implements should be:

    1. Wiped with a towel and put away
    2. Cleaned, then soaked in hospital disinfectant Correct answer.
    3. Rinsed in warm water and air dried
    4. Sprayed with alcohol and used on the next client

    Explanation

    Reusable implements must first be scrubbed clean of debris, then completely immersed in an EPA-registered hospital-grade disinfectant for the time stated on the label. Spraying or wiping alone does not meet contact-time requirements for disinfection.

  95. Question 95Nail Care

    A nail form is used during a sculptured nail service to:

    1. Hold the nail tip while the glue dries
    2. File the free edge to a smooth finish
    3. Shield the surrounding skin from primer fumes
    4. Support and shape the extension being built Correct answer.

    Explanation

    A form is fitted under the free edge to create a temporary platform that holds the product while it is shaped and cured. It is removed once the extension has set.

  96. Question 96Nail Care

    What is the purpose of nail primer in an acrylic enhancement service?

    1. To remove oils left on the natural nail
    2. To add a glossy shine to the finished nail
    3. To speed up the setting of the monomer
    4. To improve adhesion to the natural nail Correct answer.

    Explanation

    Primer is applied in a thin coat to the natural plate to improve the bond between the nail and the acrylic product. Excess primer should be avoided because it can cause the product to lift or the client to feel a burning sensation.

  97. Question 97Nail Care

    In a two-part acrylic system, the liquid component is called the:

    1. Monomer Correct answer.
    2. Initiator
    3. Primer
    4. Polymer

    Explanation

    The liquid is the monomer and the powder is the polymer; when they are mixed, the initiator in the powder starts the hardening reaction. The correct ratio of liquid to powder determines the strength and set time of the product.

  98. Question 98Nail Care

    Which nail shape has straight sides that end in slightly rounded corners?

    1. Stiletto
    2. Round
    3. Oval
    4. Squoval Correct answer.

    Explanation

    The squoval shape combines a square free edge with softened corners, which reduces snagging while keeping a squared look. Shape is chosen based on the client's nail bed and lifestyle.

  99. Question 99Nail Care

    Cuticle nippers are properly used to:

    1. Buff the nail plate until smooth
    2. Thin out a thick toenail
    3. Push back the eponychium
    4. Trim a hangnail and dead skin Correct answer.

    Explanation

    Nippers have small, sharp jaws intended for snipping a loose hangnail or a small tag of dead tissue. They should never be used to cut living tissue or to reduce the thickness of the plate.

  100. Question 100Nail Care

    How long should reusable implements typically remain fully immersed in a hospital-grade disinfectant?

    1. 1 minute
    2. 10 minutes Correct answer.
    3. 5 minutes
    4. 3 minutes

    Explanation

    Implements are immersed for the full contact time listed on the product label, which for most hospital-grade disinfectants is about 10 minutes. Shortening the time means organisms may survive and be passed to the next client.

  101. Question 101Nail Care

    On which condition must a cosmetologist decline the nail service and refer the client to a physician?

    1. Dry, brittle nails with mild peeling
    2. Redness, swelling and pain around the nail Correct answer.
    3. Ridges running lengthwise on the nails
    4. A single white spot on the nail plate

    Explanation

    Signs of infection or inflammation, such as redness, heat, swelling and pain, are contraindications because the service could spread infection or worsen the tissue. These clients belong in medical care, not the salon chair.

  102. Question 102Nail Care

    Lengthwise ridges on an older client's nails are most likely:

    1. A sign of a contagious fungal infection
    2. Caused by filing in one direction
    3. A normal change associated with aging Correct answer.
    4. Evidence of matrix damage from injury

    Explanation

    Longitudinal ridges become more common with age as growth slows and the plate's surface changes. They are not contagious and can be smoothed lightly and camouflaged with polish.

  103. Question 103Nail Care

    Green-black discoloration beneath a lifted nail plate is usually caused by:

    1. A vitamin deficiency
    2. A reaction to nail polish
    3. Fungal spores beneath the free edge
    4. A Pseudomonas bacterial infection Correct answer.

    Explanation

    The green color comes from pigment produced by Pseudomonas bacteria that thrive in the dark, moist space under a lifted plate. The area should be referred for treatment and the service withheld until it resolves.

  104. Question 104Nail Care

    A client asks to have an acrylic extension removed. What is the safest approach?

    1. File the surface, then soak in acetone Correct answer.
    2. Lift the edge with a metal pusher
    3. Soak in warm soapy water first
    4. Clip off the extension with nippers

    Explanation

    The surface is filed down to break the seal, then the product is soaked off with acetone following the manufacturer's directions. Forcing or prying the product off can strip layers of the natural plate.

  105. Question 105Nail Care

    The primary function of the hyponychium is to:

    1. Seal the area under the free edge Correct answer.
    2. Attach the nail bed to the bone
    3. Supply blood to the nail matrix
    4. Produce new nail cells at the base

    Explanation

    The hyponychium is the thickened skin beneath the free edge that forms a seal against dirt and microbes. Aggressive cleaning under the nail can break this seal and open the way to infection.

  106. Question 106Nail Care

    The whitish, half-moon-shaped area visible at the base of the nail plate is called the:

    1. Hyponychium
    2. Eponychium
    3. Mantle
    4. Lunula Correct answer.

    Explanation

    The lunula is the pale half-moon at the proximal end of the nail plate, formed by the portion of the matrix that shows through the plate. It looks lighter because the cells there are not yet fully flattened and keratinized.

  107. Question 107Nail Care

    Which massage movement consists of kneading and squeezing the muscles and soft tissue?

    1. Tapotement
    2. Effleurage
    3. Vibration
    4. Petrissage Correct answer.

    Explanation

    Petrissage is a kneading, squeezing and lifting movement that works the deeper muscle and soft tissue. It is normally performed after the light gliding strokes of effleurage have warmed the area.

  108. Question 108Nail Care

    The coarseness of a nail file's abrasive surface is indicated by its:

    1. Color of the handle
    2. Grit number Correct answer.
    3. Country of manufacture
    4. Overall length in inches

    Explanation

    Abrasive boards and files are graded by grit number: the lower the number, the coarser the surface. A high number such as 240 is fine and is used for finishing and smoothing the free edge.

  109. Question 109Nail Care

    A small strip of torn skin along the side of a nail is known as a:

    1. Leukonychia
    2. Paronychia
    3. Onychophagy
    4. Hangnail Correct answer.

    Explanation

    A hangnail, or agnail, is a narrow strip of dead skin torn loose along the sidewall or base of the nail. It should be clipped off cleanly with nippers and the area moisturized rather than pulled.

  110. Question 110Nail Care

    What is the main purpose of applying a base coat before nail polish?

    1. To speed up the drying time of the polish coats
    2. To improve adhesion and prevent staining Correct answer.
    3. To harden the free edge so it will not break
    4. To add a high-gloss shine over the finished color

    Explanation

    A base coat creates a bonding layer that helps the polish grip the plate and shields the keratin from pigments that could stain it. It also fills minor surface irregularities so the color applies evenly.

  111. Question 111Nail Care

    A client with diabetes asks for a pedicure. The safest approach is to:

    1. Work gently and avoid cutting the skin Correct answer.
    2. Soak the feet in hot water for ten minutes
    3. Apply a medicated callus remover first
    4. Refuse all foot services for this client

    Explanation

    Clients with diabetes heal slowly and are prone to infection, so service must be gentle with no cutting of live tissue. Any cut, wound or sign of infection is referred to a physician.

  112. Question 112Nail Care

    A monomer-heavy acrylic bead that is too wet will most likely:

    1. Bond more strongly to the plate
    2. Shrink and set unevenly Correct answer.
    3. Set with a smooth, glossy surface
    4. Cure too hard and become brittle

    Explanation

    A bead with too much liquid and too little powder cures with shrinkage and an uneven surface and may not polymerize fully. A properly balanced bead stays where it is placed and sets with minimal shrinkage.

  113. Question 113Nail Care

    The correct way to remove a gel polish manicure is to:

    1. Soak the nails in warm water and peel the gel away
    2. Lift the edges with a nipper and peel the product off
    3. File the surface, soak in acetone, then push gently Correct answer.
    4. Scrape the gel off with the pointed end of a file

    Explanation

    Gel polish must be broken down before removal: file off the shine, soak in acetone, then gently push the softened product off the plate. Any pulling or scraping removes layers of natural nail along with the product.

  114. Question 114Nail Care

    A client's nail plate is covered with tiny pits, like the surface of a thimble. This most often suggests:

    1. Nail psoriasis Correct answer.
    2. A fungal infection
    3. A vitamin deficiency
    4. Normal aging

    Explanation

    Thimble-like pitting is a classic sign of nail psoriasis, which disrupts the matrix where the plate is formed. It is a medical condition, so the cosmetologist provides only cosmetic care and refers the client for diagnosis.

  115. Question 115Nail Care

    Which item may be cleaned and disinfected and then used again on another client?

    1. An orangewood stick
    2. An emery board
    3. A single-use foam toe separator
    4. A metal cuticle pusher Correct answer.

    Explanation

    Only implements made of nonporous material such as stainless steel can be cleaned, disinfected and reused. Porous items absorb moisture and contaminants, cannot be reliably disinfected, and must be discarded after one client.

  116. Question 116Nail Care

    Nail tips are bonded to the natural nail with:

    1. Primer
    2. Petroleum jelly
    3. Acetone
    4. Adhesive glue Correct answer.

    Explanation

    Nail tips are attached with a cyanoacrylate adhesive that sets quickly on the natural plate. Only a small drop is needed, and the tip is then blended into the plate to hide the seam.

  117. Question 117Nail Care

    Why should the cuticle be pushed back gently rather than cut away?

    1. Cutting it changes the shape of the free edge
    2. Cutting makes the nail plate grow faster
    3. The cuticle seals the nail base against infection Correct answer.
    4. Pushing back removes the lunula

    Explanation

    The cuticle and eponychium form a living seal that keeps bacteria and moisture out of the matrix area. Cutting it opens a pathway for infection, so it is pushed back gently and only clearly dead tissue is trimmed.

  118. Question 118Nail Care

    A client with no history of injury has a dark brown streak running lengthwise along the nail plate from the matrix. The cosmetologist should:

    1. Treat the area with an antifungal soak
    2. Cover the streak with an opaque polish
    3. Refer the client to a physician Correct answer.
    4. Buff the streak away with a fine-grit block

    Explanation

    A lengthwise dark band that begins at the matrix in an uninjured nail may signal a serious condition such as melanoma. Cosmetologists do not diagnose or treat, so the service is declined and the client is referred to a physician.

  119. Question 119Nail Care

    Methyl methacrylate (MMA) is prohibited for use in nail enhancements because it:

    1. Costs more than ethyl methacrylate
    2. Causes severe allergic reactions and nail damage Correct answer.
    3. Has a strong odor that clients usually find unpleasant
    4. Cures too slowly under a UV lamp

    Explanation

    MMA is not approved for cosmetic nail products because it can cause severe allergic sensitization, contact dermatitis and lasting damage to the nail plate. Ethyl methacrylate is the accepted monomer for liquid-and-powder systems.

  120. Question 120Nail Care

    Permanent damage to the nail matrix will most likely result in:

    1. Thicker but otherwise normal nail growth
    2. A darker lunula that fades with time
    3. A permanently deformed nail plate Correct answer.
    4. A temporary white spot that grows out

    Explanation

    The matrix produces the cells that become the nail plate, so injury there shows up as a lasting groove or deformity in everything that grows out. Minor marks such as white spots come from lesser trauma to the plate itself and grow out normally.

  121. Question 121Skin Care

    How many primary layers make up the skin?

    1. Four
    2. Two
    3. Three Correct answer.
    4. Five

    Explanation

    The skin has three primary layers: the epidermis, the dermis, and the subcutaneous layer, also called the hypodermis. Each layer has distinct tissues and functions, ranging from barrier protection to fat insulation.

  122. Question 122Skin Care

    Which layer of the epidermis is the outermost?

    1. Stratum granulosum
    2. Stratum corneum Correct answer.
    3. Stratum spinosum
    4. Stratum basale

    Explanation

    The stratum corneum is the outermost epidermal layer, composed of flattened, keratinized cells that form the skin's protective barrier. These cells are continuously shed and replaced from below.

  123. Question 123Skin Care

    In sunscreen labeling, SPF stands for:

    1. Sunburn protection fluid
    2. Solar prevention filter
    3. Skin protection formula
    4. Sun protection factor Correct answer.

    Explanation

    SPF stands for sun protection factor, a measure of how much UV radiation is needed to produce a burn on protected skin compared with unprotected skin. Higher SPF values indicate more protection, but reapplication is still required.

  124. Question 124Skin Care

    Which gland produces the sebum involved in acne?

    1. Sebaceous Correct answer.
    2. Sudoriferous
    3. Ceruminous
    4. Apocrine

    Explanation

    Sebaceous glands secrete sebum, an oily substance that can combine with dead skin cells and block follicles, leading to acne. Sebum production is influenced by hormones.

  125. Question 125Skin Care

    Healthy skin is normally:

    1. Neutral
    2. Slightly acidic Correct answer.
    3. Strongly alkaline
    4. Slightly alkaline

    Explanation

    Healthy skin has an acid mantle with a pH around 4.5 to 5.5. This slightly acidic environment helps limit bacterial growth and supports barrier function.

  126. Question 126Skin Care

    The Fitzpatrick scale is used to classify:

    1. Comedone severity
    2. Skin porosity
    3. Reaction to UV light Correct answer.
    4. Lymphatic drainage rate

    Explanation

    The Fitzpatrick scale classifies skin by its tendency to burn or tan after ultraviolet exposure. It ranges from type I, which always burns, to type VI, which is deeply pigmented.

  127. Question 127Skin Care

    A client whose face is shiny across the forehead, nose, and chin with enlarged pores most likely has:

    1. Sensitive skin
    2. Normal skin
    3. Dry skin
    4. Oily skin Correct answer.

    Explanation

    Shine across the T-zone with enlarged pores is typical of oily skin, which produces excess sebum. Normal skin has balanced oil and moisture, while dry skin lacks oil.

  128. Question 128Skin Care

    What is the first step in a basic facial service?

    1. Cleanse the skin Correct answer.
    2. Extract comedones
    3. Apply a mask
    4. Exfoliate

    Explanation

    A facial begins with cleansing to remove makeup, oil, and surface debris so later products can work effectively. Exfoliation, extraction, and masks follow cleansing.

  129. Question 129Skin Care

    New skin cells are produced primarily in which epidermal layer?

    1. Stratum basale Correct answer.
    2. Stratum corneum
    3. Stratum granulosum
    4. Stratum lucidum

    Explanation

    Mitosis occurs mainly in the stratum basale, the deepest epidermal layer, where new cells push older cells upward. As cells move toward the surface, they flatten and keratinize.

  130. Question 130Skin Care

    Which cells produce melanin?

    1. Melanocytes Correct answer.
    2. Keratinocytes
    3. Fibroblasts
    4. Langerhans cells

    Explanation

    Melanocytes in the stratum basale produce melanin, the pigment that gives skin color and helps absorb UV radiation. Melanin is transferred to surrounding keratinocytes.

  131. Question 131Skin Care

    Desincrustation is performed mainly to:

    1. Increase collagen production
    2. Reduce visible redness quickly
    3. Soften sebum for extraction Correct answer.
    4. Numb the skin for comfort

    Explanation

    Desincrustation uses galvanic current with an alkaline product to soften sebum and keratin plugs, making extraction easier. It is not a collagen-stimulating or anesthetic treatment.

  132. Question 132Skin Care

    Which mask is generally best for an oily, acne-prone client?

    1. Wax mask
    2. Clay mask Correct answer.
    3. Gel mask with oil
    4. Rich cream mask

    Explanation

    Clay masks absorb excess oil and draw out impurities, making them suited to oily and acne-prone skin. Cream masks are richer and better for dry skin.

  133. Question 133Skin Care

    A product labeled comedogenic is one that:

    1. Adds fragrance
    2. Reduces wrinkles
    3. Exfoliates dead cells
    4. Tends to clog pores Correct answer.

    Explanation

    Comedogenic describes an ingredient or product with a tendency to plug pores and contribute to comedones. Noncomedogenic products are formulated to reduce that risk.

  134. Question 134Skin Care

    Hyaluronic acid works mainly as a:

    1. Astringent
    2. Emollient
    3. Sunscreen
    4. Humectant Correct answer.

    Explanation

    Hyaluronic acid is a humectant, meaning it attracts and holds water in the skin. Emollients soften skin, while astringents temporarily tighten it.

  135. Question 135Skin Care

    When is the best time to perform comedo extraction during a facial?

    1. Before the skin has been cleansed
    2. After cleansing and softening Correct answer.
    3. After the final sunscreen layer
    4. Before any warm steam is used

    Explanation

    Extractions are performed after cleansing and after the skin has been softened with warm steam or desincrustation. Extracting too early can damage tissue and be painful.

  136. Question 136Skin Care

    A client with active rosacea should generally avoid:

    1. Cool compresses applied gently
    2. Broad-spectrum sunscreen daily
    3. Gentle cleansing with lukewarm water
    4. Hot steam and direct heat Correct answer.

    Explanation

    Rosacea involves chronic redness and flushing, and heat, hot steam, and spicy foods can trigger flare-ups. Gentle, cooling care and sun protection are preferred.

  137. Question 137Skin Care

    Sunscreen should be reapplied during prolonged sun exposure approximately every:

    1. Six hours
    2. Eight hours
    3. Two hours Correct answer.
    4. Twelve hours

    Explanation

    Sunscreen should be reapplied about every two hours during prolonged sun exposure and after swimming or heavy sweating. No sunscreen remains fully effective all day.

  138. Question 138Skin Care

    Which ingredient is an alpha hydroxy acid (AHA)?

    1. Retinol
    2. Benzoyl peroxide
    3. Salicylic acid
    4. Glycolic acid Correct answer.

    Explanation

    Glycolic acid, derived from sugarcane, is a common alpha hydroxy acid used for superficial exfoliation. Salicylic acid is a beta hydroxy acid.

  139. Question 139Skin Care

    Facial massage movements are generally performed:

    1. Downward and inward
    2. In circles over the eyes
    3. Upward and outward Correct answer.
    4. Only on the nose

    Explanation

    Facial massage generally follows the direction of muscle fibers with upward and outward strokes. This supports circulation and avoids dragging tissue downward.

  140. Question 140Skin Care

    Telangiectasia appears as:

    1. Dilated capillaries Correct answer.
    2. Small dark spots
    3. Deep scars
    4. Flakes of dead skin

    Explanation

    Telangiectasia is the visible dilation of small blood vessels near the skin surface, appearing as red or purple lines. Technicians should avoid aggressive pressure and heat over these areas.

  141. Question 141Skin Care

    What is the key difference between dry skin and dehydrated skin?

    1. Dry skin lacks water; dehydrated skin lacks oil
    2. Dry skin lacks oil; dehydrated skin lacks water Correct answer.
    3. Dry skin is always oily; dehydrated skin is always normal
    4. Dry skin affects only older adults; dehydrated skin affects only teens

    Explanation

    Dry skin is a skin type lacking sufficient oil, while dehydration is a temporary condition lacking water that can occur in any skin type. A client can be oily and dehydrated at the same time.

  142. Question 142Skin Care

    A client on the Fitzpatrick scale who always burns and never tans is which type?

    1. Type IV
    2. Type I Correct answer.
    3. Type III
    4. Type II

    Explanation

    Fitzpatrick type I is very fair and always burns, never tans. Type II usually burns but can tan minimally, and higher types tan more readily.

  143. Question 143Skin Care

    In the ABCDE warning signs of melanoma, the letter B stands for:

    1. Bleeding from the spot
    2. Uneven border Correct answer.
    3. Blistering or crusting
    4. Burning or stinging

    Explanation

    The ABCDE signs are asymmetry, border irregularity, color variation, diameter larger than a pencil eraser, and evolving changes. Border irregularity refers to uneven or ragged edges.

  144. Question 144Skin Care

    How does an emollient differ from a humectant?

    1. An emollient exfoliates; a humectant cleanses
    2. An emollient softens skin; a humectant attracts water Correct answer.
    3. An emollient blocks UV; a humectant adds color
    4. An emollient attracts water; a humectant seals the surface

    Explanation

    Humectants attract and bind water, while emollients fill spaces between skin cells to soften and smooth the surface. Many moisturizers combine both types of ingredients.

  145. Question 145Skin Care

    Milia differ from open comedones because milia are:

    1. Closed cysts with no pore opening Correct answer.
    2. Open pores filled with oxidized sebum
    3. Contagious viral lesions
    4. Caused by bacteria only

    Explanation

    Milia are small, closed, keratin-filled cysts with no pore opening, often seen around the eyes and cheeks. Open comedones, or blackheads, have a pore opening and dark oxidized sebum.

  146. Question 146Skin Care

    The acid mantle of the skin is formed mainly by a mixture of:

    1. Sebum and sweat Correct answer.
    2. Water and sodium chloride
    3. Collagen and elastin
    4. Keratin and melanin

    Explanation

    Sebum from the sebaceous glands mixes with sweat on the skin surface to form a slightly acidic film called the acid mantle. This film helps protect the skin from bacteria and maintains a pH of about 4.5 to 5.5.

  147. Question 147Skin Care

    Which layer of the skin contains blood vessels, nerve endings, and glands?

    1. Dermis Correct answer.
    2. Stratum basale
    3. Epidermis
    4. Stratum corneum

    Explanation

    The dermis is the middle layer of the skin and houses blood vessels, nerves, sweat glands, and sebaceous glands. The epidermis is avascular, so it does not contain blood vessels or glands.

  148. Question 148Skin Care

    Sebaceous glands are most closely associated with which structure?

    1. Apocrine glands
    2. Melanocytes
    3. Eccrine sweat ducts
    4. Hair follicles Correct answer.

    Explanation

    Sebaceous glands are usually attached to hair follicles and secrete sebum onto the skin surface. Sebum lubricates the skin and contributes to the acid mantle.

  149. Question 149Skin Care

    Which vitamin is commonly used in skin care to promote cell turnover and reduce the appearance of fine lines?

    1. Vitamin A Correct answer.
    2. Vitamin C
    3. Vitamin K
    4. Vitamin E

    Explanation

    Vitamin A and its derivatives, called retinoids, speed up cell turnover and are used in anti-aging products. They can also increase sun sensitivity, so daily sunscreen is important.

  150. Question 150Skin Care

    A client with oily skin and blackheads would benefit most from an exfoliant containing which ingredient?

    1. Jojoba oil
    2. Titanium dioxide
    3. Salicylic acid Correct answer.
    4. Hyaluronic acid

    Explanation

    Salicylic acid is a beta hydroxy acid that is oil soluble, so it can penetrate pores and help dissolve sebum and dead cells. This makes it useful for blackheads and oily, acne-prone skin.

  151. Question 151Skin Care

    A client who uses a retinol product at night should be advised to:

    1. Use a sunscreen daily Correct answer.
    2. Apply the retinol before sun exposure
    3. Exfoliate with a scrub every morning
    4. Skip moisturizer to avoid dilution

    Explanation

    Retinoids can make the skin more sensitive to ultraviolet radiation, so daily broad-spectrum sunscreen is essential. Retinol is typically applied at night and followed with moisturizer to reduce irritation.

  152. Question 152Skin Care

    During a facial, steam is typically used to:

    1. Soften sebum before extraction Correct answer.
    2. Permanently reduce enlarged pore size
    3. Reduce redness associated with rosacea
    4. Sterilize the skin surface completely

    Explanation

    Warm steam softens sebum and loosens dead cells, making comedo extraction easier and less traumatic. Steam does not permanently change pore size or sterilize the skin.

  153. Question 153Skin Care

    A Wood's lamp is used during skin analysis primarily to:

    1. Reveal dehydration and sun damage Correct answer.
    2. Magnify individual pores for viewing
    3. Determine the client's Fitzpatrick type
    4. Measure the skin's surface temperature

    Explanation

    A Wood's lamp emits ultraviolet light that causes some skin conditions and residues to fluoresce. Estheticians use it to help identify dehydration, sun damage, and pigmentation differences.

  154. Question 154Skin Care

    A small, solid elevation of the skin, such as an inflamed acne lesion, is called a:

    1. Vesicle
    2. Macule
    3. Pustule
    4. Papule Correct answer.

    Explanation

    A papule is a small, solid, raised lesion without pus. A pustule, by contrast, contains visible pus.

  155. Question 155Skin Care

    The SPF number on a sunscreen label indicates the level of protection against:

    1. Blue light
    2. Infrared rays
    3. UVB rays Correct answer.
    4. UVA rays

    Explanation

    SPF stands for sun protection factor and measures how well a product protects against UVB rays, which cause sunburn. UVA protection is indicated separately, often as broad-spectrum or PA rating.

  156. Question 156Skin Care

    Which condition is a contraindication for performing a facial treatment?

    1. Dry skin
    2. Sensitive skin
    3. Closed comedones
    4. An active cold sore Correct answer.

    Explanation

    An active cold sore is a contagious viral infection, and treating the area can spread the virus and irritate the lesion. Facials should be postponed until the cold sore has healed.

  157. Question 157Skin Care

    Vitamin C is added to many skin care products primarily because it:

    1. Acts as an antioxidant Correct answer.
    2. Provides SPF 30 sun protection
    3. Increases sebum production significantly
    4. Thickens the stratum corneum

    Explanation

    Vitamin C is an antioxidant that helps neutralize free radicals and can reduce the appearance of hyperpigmentation. It does not replace sunscreen or increase sebum.

  158. Question 158Skin Care

    The primary cause of extrinsic skin aging is:

    1. Sun exposure Correct answer.
    2. Hormonal changes
    3. Poor circulation
    4. Genetic inheritance

    Explanation

    Extrinsic aging is driven mainly by external factors, especially ultraviolet radiation from the sun. Intrinsic aging, by contrast, is related to genetics and the passage of time.

  159. Question 159Skin Care

    A pearly, translucent nodule with rolled edges on sun-exposed skin is most characteristic of:

    1. Basal cell carcinoma Correct answer.
    2. Actinic keratosis lesion
    3. Malignant melanoma of the skin
    4. Squamous cell carcinoma

    Explanation

    Basal cell carcinoma often appears as a pearly or waxy bump with rolled edges, commonly on sun-exposed areas. Any suspicious lesion should be referred to a physician for diagnosis.

  160. Question 160Skin Care

    Patchy brown pigmentation on the cheeks and forehead that is often triggered by hormones and sun exposure is known as:

    1. Freckles
    2. Melasma Correct answer.
    3. Seborrheic keratosis
    4. Vitiligo

    Explanation

    Melasma is characterized by symmetrical brown patches, often on the cheeks, forehead, and upper lip, and is linked to hormonal changes and sun exposure. Sun protection is essential for managing it.

  161. Question 161Texas Cosmetology Laws and Rules

    Which state agency currently administers and enforces the Texas cosmetology licensing law?

    1. The Texas Cosmetology Commission
    2. The Texas Commission on Environmental Quality
    3. The Texas Department of Licensing and Regulation Correct answer.
    4. The Texas Health and Human Services Commission

    Explanation

    The former Texas Cosmetology Commission was abolished and its licensing and enforcement duties were transferred to the Texas Department of Licensing and Regulation (TDLR). TDLR now issues cosmetology, esthetician, manicurist, and related licenses and inspects salons and schools.

  162. Question 162Texas Cosmetology Laws and Rules

    What is the minimum age for a person to be issued a Texas cosmetology license?

    1. 16 years
    2. 18 years
    3. 21 years
    4. 17 years Correct answer.

    Explanation

    Texas requires an applicant for a cosmetology license to be at least 17 years of age, in addition to meeting the training and examination requirements. A person younger than 17 cannot be licensed even if all hours are complete.

  163. Question 163Texas Cosmetology Laws and Rules

    Which product is approved for disinfecting reusable cosmetology implements between clients?

    1. A UV light cabinet used for twenty minutes
    2. An EPA-registered hospital-grade disinfectant Correct answer.
    3. Soap and water followed by air drying
    4. Rubbing alcohol applied with a cotton ball

    Explanation

    Reusable implements must be cleaned and then disinfected with an EPA-registered hospital-grade disinfectant used according to the manufacturer's directions. Cleaning removes debris, but disinfection with an approved product is the required second step.

  164. Question 164Texas Cosmetology Laws and Rules

    Before beginning a service on a new client, a licensee must do which of the following?

    1. Rinse hands in disinfectant solution
    2. Apply hand sanitizer only
    3. Wash hands with soap and warm water Correct answer.
    4. Wipe hands with a clean dry towel

    Explanation

    Hands must be washed with soap and water before serving each client and after using the restroom or handling contaminated items. Hand hygiene protects both the licensee and the client from cross-contamination.

  165. Question 165Texas Cosmetology Laws and Rules

    How must towels and linens used during services be handled?

    1. Shared among staff members throughout the day
    2. Laundered once at the end of each week
    3. Reused until they become visibly soiled
    4. Replaced with a clean towel for each client Correct answer.

    Explanation

    A clean towel or linen must be used for each client, and soiled linens must be kept in a closed container until laundered. Using one towel for multiple clients spreads microorganisms.

  166. Question 166Texas Cosmetology Laws and Rules

    A person wants to open a shop where haircutting and nail services will be sold to the public. What must the business obtain?

    1. A city cosmetology permit with no state license
    2. A salon license issued by TDLR Correct answer.
    3. A surety bond posted with the county
    4. A registration filed only if more than three employees are hired

    Explanation

    Any establishment where cosmetology services are performed for the public must hold a current salon license from TDLR, in addition to each individual practitioner holding a personal license. City permits do not replace the state salon license.

  167. Question 167Texas Cosmetology Laws and Rules

    How often must a Texas cosmetology license be renewed?

    1. Every five years
    2. Every year
    3. Every two years Correct answer.
    4. Every three years

    Explanation

    Texas cosmetology and related licenses are renewed on a two-year cycle. A licensee who continues to work after the expiration date is practicing without a valid license.

  168. Question 168Texas Cosmetology Laws and Rules

    The Texas statutes governing cosmetology are located in which chapter of the Occupations Code?

    1. Occupations Code, Chapter 1602 Correct answer.
    2. Health & Safety Code, Chapter 431
    3. Occupations Code, Chapter 53
    4. Business & Commerce Code, Chapter 51

    Explanation

    Cosmetology is regulated under Occupations Code, Chapter 1602, with detailed requirements carried in the administrative rules. Chapter 53 of the same code deals generally with license regulation and disciplinary procedures.

  169. Question 169Texas Cosmetology Laws and Rules

    How many clock hours of instruction must a Texas cosmetology (operator) student complete before taking the licensing examination?

    1. 1,500 hours Correct answer.
    2. 2,000 hours
    3. 1,200 hours
    4. 1,000 hours

    Explanation

    The cosmetology curriculum requires 1,500 clock hours of instruction completed at a licensed school. Hours must be documented by the school before the student may be scheduled for the licensing exam.

  170. Question 170Texas Cosmetology Laws and Rules

    How many clock hours are required in the esthetician curriculum in Texas?

    1. 500 hours
    2. 750 hours Correct answer.
    3. 1,500 hours
    4. 1,000 hours

    Explanation

    The esthetician program requires 750 clock hours of instruction, reflecting a narrower scope of practice than full cosmetology. Completion must be certified by the licensed school.

  171. Question 171Texas Cosmetology Laws and Rules

    How many clock hours are required in the Texas manicurist curriculum?

    1. 450 hours
    2. 900 hours
    3. 300 hours
    4. 600 hours Correct answer.

    Explanation

    Manicurist students must complete 600 clock hours in a licensed school before being eligible for the licensing exam. The manicurist license is limited to nail and hand/foot care services.

  172. Question 172Texas Cosmetology Laws and Rules

    Detailed sanitation, licensing, and school requirements for Texas cosmetology appear in which title and chapter of the Texas Administrative Code?

    1. Title 22, Chapter 119
    2. Title 40, Chapter 60
    3. Title 16, Chapter 85
    4. Title 16, Chapter 83 Correct answer.

    Explanation

    The cosmetology administrative rules are codified at 16 Texas Administrative Code, Chapter 83. These rules implement the Occupations Code chapter and are what inspectors enforce on site.

  173. Question 173Texas Cosmetology Laws and Rules

    A nail technician uses emery boards and buffing blocks in her work. How must these items be handled between clients?

    1. Washed with soap and reused after air drying
    2. Discarded after a single use or given to the client Correct answer.
    3. Disinfected with alcohol and reused after drying
    4. Stored in a closed jar and reused until worn out

    Explanation

    Porous items such as emery boards, buffing blocks, and foam toe separators cannot be reliably cleaned and disinfected, so they must be discarded after one client or given to that client. Only nonporous implements can be disinfected and reused.

  174. Question 174Texas Cosmetology Laws and Rules

    A metal comb falls onto the salon floor during a service. Before it can be used again, the comb must be:

    1. Rinsed under running water
    2. Set aside for the next client
    3. Cleaned and disinfected Correct answer.
    4. Wiped on a clean towel

    Explanation

    Any implement that contacts the floor or a contaminated surface must be cleaned and then disinfected before it touches a client again. A water rinse or towel wipe does not remove microorganisms.

  175. Question 175Texas Cosmetology Laws and Rules

    A client's ear is nicked and bleeding during a haircut. What is the correct response?

    1. Cover the spill with a clean towel and finish the haircut
    2. Blot the spill with a towel and continue the service
    3. Rinse the area with warm water and resume cutting
    4. Wear gloves, absorb the spill, and disinfect the area Correct answer.

    Explanation

    Blood and body fluids must be handled under bloodborne-pathogen precautions: gloves are worn, the spill is absorbed and removed, the surface is disinfected with a hospital-grade product, and hands are washed afterward. Waste goes into a closed container.

  176. Question 176Texas Cosmetology Laws and Rules

    How often must a whirlpool pedicure basin be cleaned and disinfected?

    1. Once at the end of each week
    2. Once at the end of each day
    3. Only when the basin looks soiled
    4. After each client, per manufacturer instructions Correct answer.

    Explanation

    Pedicure equipment must be drained, cleaned, and disinfected after every client using the product and procedure specified by the manufacturer. A daily or weekly schedule allows residue and organisms to build up between clients.

  177. Question 177Texas Cosmetology Laws and Rules

    When may a TDLR inspector enter and inspect a licensed salon?

    1. Only during hours the salon has appointments booked
    2. At any time during business hours, with no notice Correct answer.
    3. Only with a warrant issued by a district court
    4. Only after written notice of at least 24 hours

    Explanation

    TDLR representatives may inspect a licensed salon during its business hours without advance notice to verify compliance with licensing and sanitation rules. Licensees accept this condition when they accept a license.

  178. Question 178Texas Cosmetology Laws and Rules

    Which of the following services falls within the lawful scope of an esthetician license in Texas?

    1. Cutting and styling hair
    2. Applying facial masks and performing waxing Correct answer.
    3. Giving a permanent wave
    4. Applying hair color

    Explanation

    Estheticians are licensed for skin care, makeup, and hair removal services such as facials and waxing. Haircutting and chemical hair services require a cosmetology license.

  179. Question 179Texas Cosmetology Laws and Rules

    A licensed salon is sold to a new owner who keeps the same name and staff. What happens to the salon license?

    1. It automatically transfers to the new owner along with the business
    2. It remains valid until the end of the calendar year
    3. The new owner must obtain a new salon license Correct answer.
    4. It can be amended by mailing in a small transfer fee

    Explanation

    A salon license is issued to a specific owner for a specific location and is not transferable. A change of ownership requires the new owner to apply for and obtain a salon license before operating.

  180. Question 180Texas Cosmetology Laws and Rules

    Before a newly hired stylist begins serving clients, the salon owner should:

    1. Collect a copy of the stylist's school diploma
    2. Verify that the stylist holds a current Texas license Correct answer.
    3. Accept a verbal statement that the stylist is licensed
    4. Have the stylist sign a liability waiver

    Explanation

    A salon may not allow anyone to perform cosmetology services without a current license, so the owner must confirm licensure before the employee begins work. Relying on a diploma or a verbal claim does not establish a valid license.

  181. Question 181Texas Cosmetology Laws and Rules

    Which statement correctly describes students enrolled in a licensed Texas cosmetology school?

    1. Allowed to work unsupervised after 500 clock hours
    2. Paid minimum wage by the school for each client served
    3. Supervised by a licensed instructor and unpaid Correct answer.
    4. Limited to practicing on other enrolled students only

    Explanation

    Students may perform services on the public only in a licensed school and only under the supervision of a licensed instructor, and they may not be paid for those services. Their work is part of the required curriculum.

  182. Question 182Texas Cosmetology Laws and Rules

    Who administers the written and practical licensing examinations for Texas cosmetology applicants?

    1. TDLR staff at the Austin headquarters
    2. The Cosmetology Advisory Board
    3. A TDLR-approved testing vendor Correct answer.
    4. Local community college instructors

    Explanation

    TDLR contracts with an approved testing vendor to schedule and administer the licensing exams, while TDLR retains authority over licensing decisions. The advisory board recommends policy but does not test applicants.

  183. Question 183Texas Cosmetology Laws and Rules

    A stylist rents a booth in a licensed salon and serves her own clients. Which statement is accurate?

    1. The renter must hold a current license and follow sanitation rules Correct answer.
    2. The renter may work on an expired license while the salon is licensed
    3. The salon's license covers the renter's services while on the premises
    4. The renter needs a license only if she subleases her booth to others

    Explanation

    Each person who performs cosmetology services, including a booth renter, must hold a personal license and must follow the sanitation and safety rules. The salon license does not substitute for an individual license.

  184. Question 184Texas Cosmetology Laws and Rules

    A stylist's license expired four months ago and she keeps taking clients while her renewal is unprocessed. Her conduct is:

    1. Permitted as long as the salon's license is current
    2. Unlicensed practice subject to enforcement action Correct answer.
    3. Permitted while a renewal application is pending with TDLR
    4. Allowed if the late fee is paid within 90 days

    Explanation

    Practicing with an expired license is unlicensed practice and can result in administrative penalties and criminal exposure. A pending renewal does not restore the right to practice until the license is actually renewed.

  185. Question 185Texas Cosmetology Laws and Rules

    A client seeking a chemical relaxer has visible irritation and open sores on the scalp. The licensee should:

    1. Decline the service and refer the client to a physician Correct answer.
    2. Proceed using a gentler product and monitor the scalp
    3. Apply an over-the-counter ointment and then continue
    4. Perform the service and note the sores in a client record

    Explanation

    A licensee may not perform a service on broken or infected skin and may not diagnose or treat a skin condition. The correct action is to decline the service and refer the client to a physician for evaluation.

  186. Question 186Texas Cosmetology Laws and Rules

    Which state agency is responsible for issuing cosmetology licenses and enforcing the Texas cosmetology laws and rules?

    1. Texas State Board of Barbers and Cosmetologists
    2. Texas Department of Licensing and Regulation Correct answer.
    3. Texas Department of State Health Services
    4. Texas Commission on Barbering and Cosmetology

    Explanation

    Cosmetology licensing and enforcement in Texas are handled by the Texas Department of Licensing and Regulation (TDLR), which administers Occupations Code Chapter 1602 and the rules in 16 Texas Administrative Code Chapter 83. The former cosmetology commission was abolished and its functions moved to TDLR, which is advised by a cosmetology advisory board.

  187. Question 187Texas Cosmetology Laws and Rules

    Before beginning a service on each client, a licensee must:

    1. wash the hands with soap and water Correct answer.
    2. wipe the hands with a disinfectant towel
    3. put on a fresh pair of disposable gloves
    4. apply an alcohol-based hand sanitizer

    Explanation

    Texas sanitation rules require a licensee to thoroughly wash the hands with soap and water before serving each client and after using the restroom, eating, or handling soiled items. Gloves and sanitizers do not replace handwashing as the required step between clients.

  188. Question 188Texas Cosmetology Laws and Rules

    Which service may a licensed manicurist lawfully perform in Texas?

    1. performing a facial with extractions
    2. applying artificial nail extensions Correct answer.
    3. giving a haircut with clippers
    4. applying a chemical hair relaxer

    Explanation

    The manicurist license authorizes nail care, including manicures, pedicures, nail extensions, and similar nail services. Cutting and chemically relaxing hair fall under the cosmetology license, and facial skin care falls under the esthetician license.

  189. Question 189Texas Cosmetology Laws and Rules

    A person who teaches students in a licensed Texas cosmetology school must hold which license?

    1. a cosmetology school license
    2. a salon manager license
    3. a cosmetology operator license
    4. a cosmetology instructor license Correct answer.

    Explanation

    Only a person holding a current cosmetology instructor license may provide instruction to students in a licensed school. The operator license authorizes services on the public but not teaching, and the school license covers the facility itself.

  190. Question 190Texas Cosmetology Laws and Rules

    Implements that will be reused on clients must be cleaned and then disinfected with:

    1. an alcohol-based hand sanitizer solution
    2. a mixture of household bleach and dish soap
    3. a quaternary ammonium floor cleaner
    4. an EPA-registered tuberculocidal disinfectant Correct answer.

    Explanation

    Reusable implements must be washed, rinsed, and completely immersed in an EPA-registered hospital-grade disinfectant that carries a tuberculocidal claim, following the manufacturer's contact time. Improvised products or cleaners not labeled for instrument disinfection do not meet the rule.

  191. Question 191Texas Cosmetology Laws and Rules

    A salon owner opens a second location across town under the same business name. What is required?

    1. a separate establishment license for the new location Correct answer.
    2. No action is needed because the business name is unchanged
    3. a new cosmetology operator license for each stylist
    4. only a change-of-address notice to TDLR

    Explanation

    Each physical location where cosmetology services are offered to the public must hold its own establishment (salon) license. A change-of-address notice does not license a new location, and individual practitioner licenses are separate from the establishment license.

  192. Question 192Texas Cosmetology Laws and Rules

    A cosmetologist licensed in another state moves to Texas and wants to work in a salon. Which statement is accurate?

    1. The person may work in Texas for 90 days while a Texas license application is pending
    2. The person may qualify for a Texas license by endorsement Correct answer.
    3. The out-of-state license cannot be used, so the person must enroll in a Texas cosmetology school
    4. The person may practice as long as the out-of-state license is displayed in the salon

    Explanation

    Texas allows an applicant who holds a license in another jurisdiction to obtain a Texas license by endorsement when the other jurisdiction's requirements are substantially equivalent. A person must hold the Texas license before performing services for the public here.

  193. Question 193Texas Cosmetology Laws and Rules

    After a haircut is completed, the hair clippings must be:

    1. left on the floor until the next client arrives
    2. swept into a corner until the end of the day
    3. placed in a covered, closed container Correct answer.
    4. pushed under the styling chair until closing

    Explanation

    Clippings and other waste must be removed promptly and placed in a covered, closed container so the work area stays sanitary. Waste may not be allowed to accumulate on the floor or in open piles between clients.

  194. Question 194Texas Cosmetology Laws and Rules

    Which practice meets Texas sanitation requirements for linens used in a salon?

    1. brushing off a towel and reusing it
    2. using a clean towel and cape for each client Correct answer.
    3. storing soiled towels in an open hamper
    4. spraying a used towel with disinfectant

    Explanation

    A clean towel and a clean cape must be used for each client, and soiled linens must be kept in a closed container until laundered. Brushing off or spot-spraying a used towel does not make it clean.

  195. Question 195Texas Cosmetology Laws and Rules

    A licensee is preparing to renew a Texas cosmetology license. Which statement about continuing education is accurate?

    1. Texas does not require continuing education for cosmetology license renewal Correct answer.
    2. Only cosmetology instructors must complete continuing education
    3. Twelve hours of continuing education must be completed every two years
    4. Continuing education hours must be approved by a licensed school

    Explanation

    Texas does not impose a continuing education requirement for renewal of a cosmetology, esthetician, manicurist, or instructor license. Renewal is based on submitting a timely application and the required fee.

  196. Question 196Texas Cosmetology Laws and Rules

    TDLR may take disciplinary action against a licensee for which conduct?

    1. declining to serve a client who arrives late
    2. working at more than one licensed salon
    3. charging prices higher than nearby salons
    4. practicing in a way that endangers public health and safety Correct answer.

    Explanation

    Grounds for discipline include unsanitary practices, unsafe services, unlicensed activity, and other violations that threaten the public. Setting prices and scheduling decisions are business matters, and a licensee may work in more than one licensed establishment.

  197. Question 197Texas Cosmetology Laws and Rules

    What is the maximum administrative penalty TDLR may assess for a single violation of the cosmetology laws?

    1. $5,000 Correct answer.
    2. $100
    3. $1,000
    4. $500

    Explanation

    TDLR's statutory authority allows an administrative penalty of up to $5,000 for each violation of a law or rule it enforces. The penalty amount within that range is set case by case based on factors such as seriousness and history.

  198. Question 198Texas Cosmetology Laws and Rules

    A salon is cited for unsanitary conditions and continues operating the same way for several days afterward. How are these continuing violations treated?

    1. a single violation may be counted once every 30 days
    2. each day the violation continues may be a separate violation Correct answer.
    3. violations are counted only when a follow-up inspection occurs
    4. only the first violation is counted, no matter how long it lasts

    Explanation

    When a violation continues after notice, each day it persists may be treated as a separate violation, which increases exposure to penalties. Correcting the condition promptly stops the violations from accumulating.

  199. Question 199Texas Cosmetology Laws and Rules

    A salon has a licensed esthetician on staff but no manicurist working that day. The esthetician performs a manicure on a walk-in client. This conduct is:

    1. acceptable if the client signs a consent form
    2. acceptable if the esthetician has more than one year of experience
    3. acceptable because both licenses are issued by TDLR
    4. a violation, because a manicure is outside an esthetician's scope of practice Correct answer.

    Explanation

    Each license authorizes only the services within its scope; an esthetician may provide skin care services but not nail services. Experience, client consent, or the fact that both licenses come from TDLR does not expand the scope.

  200. Question 200Texas Cosmetology Laws and Rules

    Which of the following is required of a licensed cosmetology establishment?

    1. an outdoor drying area for linens
    2. a handwashing facility with hot and cold running water Correct answer.
    3. a separate break room for employees
    4. a cash register at each work station

    Explanation

    An establishment must provide adequate handwashing facilities with hot and cold running water so licensees can wash before each client and after contamination. Break rooms, outdoor drying areas, and station cash registers are not licensing requirements.

TX Cosmetology flashcards

32 cards. Read the term and the definition here. The deck at the top of this page is optional.

Cleaning
The removal of visible dirt, oil, and debris from a surface or implement using soap, detergent, and water; it is the required first step before any disinfection.
Disinfection
The use of a chemical agent to destroy most pathogenic microorganisms on hard, nonporous surfaces; it does not kill bacterial spores and does not work on porous items.
Sterilization
A process that destroys all microbial life, including bacterial spores, on an object; in salons it is limited to items designed for it, such as certain metal implements.
Contact time
The length of time a cleaned implement must stay fully submerged and wet in disinfectant, as stated on the product label, to achieve the claimed kill level.
Porous implements
Items such as nail files, buffers, wooden sticks, cotton, and sponges that absorb liquid and cannot be disinfected; they must be discarded after use or given to the client.
Safety Data Sheet
A document supplied with a salon chemical that lists its hazards, safe handling, first-aid measures, and spill response; it must be accessible in the workplace.
Blood spill procedure
Stop the service, don gloves, clean the area with soap and water, disinfect with an EPA-registered hospital disinfectant, and place contaminated materials in a closed container.
Whirlpool foot spa log
A written record kept by the salon showing the date, time, and method used to clean and disinfect the pedicure basin after each client, available for inspection.
Cuticle
The outermost layer of the hair shaft, made of overlapping transparent scales that protect the cortex; it opens with alkalinity and heat and closes with acidity.
Cortex
The middle layer of the hair, containing melanin and most of the hair's strength and elasticity; chemical and physical changes to hair occur mainly here.
Anagen phase
The active growth phase of the hair cycle, lasting roughly two to seven years, during which cells in the follicle divide and the hair lengthens.
Telogen phase
The resting phase of the hair cycle, lasting about three months, at the end of which the old hair sheds and a new hair begins to grow.
Hair pH
Hair and scalp sit at about pH 4.5 to 5.5; alkaline solutions swell the shaft and raise the cuticle, while acidic solutions contract it and add shine.
Graduated haircut
A cut built with 45-degree elevation, producing lengths that increase from the perimeter upward and creating a stacked or wedge-shaped line.
Patch test
A small application of aniline-derivative hair color on the skin, performed 24 to 48 hours before the service, to detect an allergic reaction.
Matrix
The area at the base of the nail where new nail cells are produced; damage to the matrix permanently affects the shape and growth of the nail plate.
Lunula
The whitish, half-moon area at the base of the nail plate; it is the visible portion of the matrix and appears lighter because cells are not yet fully keratinized.
Onychomycosis
A fungal infection of the nail plate causing thickening, discoloration, and lifting; it is a disease, so the client is referred to a physician rather than treated in the salon.
Paronychia
An infection or inflammation of tissue around the nail fold, usually from bacteria entering through a cut or torn cuticle; it is red, swollen, and often painful.
Nail plate growth rate
The nail plate grows from the matrix at roughly one-eighth inch (about 3 mm) per month, faster in summer, on the dominant hand, and in younger people.
Epidermis
The outermost, avascular layer of skin; its surface is the stratum corneum, made of flattened keratinized cells that limit water loss and block microorganisms.
Dermis
The layer beneath the epidermis that contains collagen and elastin fibers, blood vessels, nerves, sweat glands, and sebaceous glands; it supplies the skin with nutrients.
Acid mantle
The slightly acidic film on the skin surface, about pH 4.5 to 5.5, formed by sebum and sweat; it inhibits bacteria and helps maintain barrier function.
Fitzpatrick scale
A six-point classification of skin types based on response to ultraviolet exposure, used to estimate burning and tanning tendency and guide treatment and sun protection choices.
Effleurage
A massage stroke using light, gliding movements of the palms or fingers, used to begin and end a facial massage and to apply product evenly over the skin.
TDLR
The Texas Department of Licensing and Regulation, the state agency that licenses cosmetologists, estheticians, manicurists, salons, and schools and enforces the cosmetology rules.
Occupations Code Chapter 1602
The Texas statute titled Cosmetology that sets licensing requirements, scope of practice, and enforcement authority for the cosmetology industry in the state.
16 TAC Chapter 83
The Texas Administrative Code chapter containing TDLR's cosmetology rules, including sanitation standards, license requirements, school operations, and inspection procedures.
Establishment license
A license issued by TDLR for a salon location; the salon may not legally provide cosmetology services until the license is current and posted for clients to see.
License display rule
Texas rules require a licensee to keep the individual license displayed at the workstation while performing services, and salons must post the establishment license conspicuously.
Unlicensed practice
Providing cosmetology services for compensation without a valid Texas license, or employing an unlicensed person in a salon; it carries administrative penalties and criminal liability.
Student practice rule
A student enrolled in a licensed cosmetology school may perform services only under instructor supervision and may not accept payment from the client for those services.

TX Cosmetology study guide

Sanitation, Disinfection, and Safety

Core distinctions

Cleaning removes visible soil, product residue, and oils. Disinfection destroys most pathogenic microorganisms on nonporous surfaces and implements. Sterilization destroys all microbial life and is not the routine salon standard. Texas rules require implements to be cleaned before disinfection; a disinfectant cannot penetrate hair, skin oil, or product residue. Use an EPA-registered hospital-grade disinfectant according to the label’s contact time. Porous items, such as cotton, wooden sticks, and some files, are single-use or disposable. Nonporous metal or plastic tools may be disinfected if the label allows. Keep clean and dirty tools separate.

Safety

Practice handwashing, wear gloves for blood or body fluids, use eye protection when splashing is possible, ventilate chemical areas, keep SDS information available, label containers, and avoid eating or drinking at the station. For blood exposure, stop the service, put on gloves, clean the wound, and disinfect contaminated tools and surfaces with a product labeled for bloodborne pathogens. Follow the salon’s exposure policy.

Traps

Questions often show a tool placed directly into disinfectant without cleaning, a UV cabinet called a disinfectant, disinfectant “topped off” without label directions, or towels reused between clients. Contact time is commonly ignored.

Worked example

Clippers with a nonporous blade and no visible blood: remove hair, wash with soap and water, dry, apply the EPA-registered hospital-grade disinfectant per label, wait the full contact time, dry, and store in a clean covered area. If blood is present, use gloves and a disinfectant with a bloodborne-pathogen claim.

Rule of thumb: clean first, disinfect second, and follow the label contact time.

Hair Care and Haircutting

Hair fundamentals

Know the cuticle as the protective outer layer, the cortex as the strength and pigment layer, and the medulla as the center, which is not always present. Growth cycles include anagen (active), catagen (transition), and telogen (rest and shedding). Before service, assess porosity, elasticity, density, scalp condition, and client history. Shampoo lifts dirt and oil; conditioner lowers friction and improves manageability. Wet hair stretches and may shrink after drying, so tension and length checks matter.

Haircutting

Use clean capes and neck strips, and sanitize tools. Establish a guide, section consistently, control elevation and tension, and cross-check. Elevation controls graduation and layers: low elevation builds weight; high elevation removes weight. Blunt shears cut cleanly; dull shears crush or bend hair. Razors and clippers require correct tension and blade care.

Traps

Uneven results often come from inconsistent subsection size, wet-cutting without accounting for shrinkage, cutting before consulting, excessive tension, or skipping cross-check. Do not diagnose scalp disease; refer suspicious conditions.

Worked example

For a uniform layer: part a central vertical section, take a mobile guide at 90 degrees, cut parallel to the guide, work side to side with the same elevation, then cross-check diagonally. If one side is longer, re-establish the guide rather than chase the line.

Rule of thumb: keep subsections no wider than your comb, and let elevation and the guide do the work.

Nail Care

Anatomy and scope

Know the nail plate, nail bed, matrix, cuticle, eponychium, hyponychium, and lunula. The matrix produces the plate; injury can cause permanent distortion. The cuticle is living tissue at the proximal nail fold, so do not cut it. Distinguish cosmetic conditions from signs of disease such as redness, swelling, pus, discoloration, or separation. Manicurists do not diagnose; refer suspicious findings.

Service safety

Sanitize hands, inspect nails and skin, and use single-use files and buffers or disinfected nonporous implements. Clean implements before disinfection. File natural nails in one direction to reduce splitting, and use an appropriate grit. Avoid over-drilling with e-files: keep the bit moving, control heat, and stop if the client feels pain. Acrylic and gel products need ventilation; monomer is flammable, and skin contact should be avoided.

Traps

Common errors include cutting living cuticle, filing aggressively back and forth, using the same porous file on multiple clients, diagnosing fungus, ignoring red swollen nail folds, or applying product over infection.

Worked example

A client has slight separation at the free edge but no redness or pus. Do not diagnose. Provide a gentle service only if there are no signs of infection, avoid packing product into the separation, and refer if it worsens. If pus or swelling is present, stop and refer.

Rule of thumb: no cutting living tissue, no diagnosis, and no shared porous implements.

Skin Care

Skin basics

Know the epidermis, dermis, and subcutaneous layer. The barrier function protects against water loss and irritants; over-exfoliation damages it. Assess skin type and condition, allergies, medications, and recent treatments. Fitzpatrick type guides sun sensitivity, not permission for a service. Services include cleansing, exfoliation, masks, massage, and waxing. Patch-test products per manufacturer and keep records.

Contraindications and safety

Do not treat active infection, open lesions, severe inflammation, or contagious conditions; refer. Waxing is risky for clients using isotretinoin, tretinoin or other retinoids, or those with recent chemical peels or laser treatments, because skin may tear. Extractions should be limited to superficial, noninflamed lesions; do not squeeze cystic or inflamed acne. Massage is contraindicated with fever, contagious illness, uncontrolled conditions, or recent injury. Use gloves, clean linens, single-use applicators, and ventilation.

Traps

Waxing over retinoid-treated skin, extracting inflamed acne, using dirty spatulas, diagnosing skin disease, or treating a client with a cold sore are frequent question traps.

Worked example

A client using isotretinoin asks for brow waxing. Do not wax; explain the risk of fragile skin and tearing, offer tweezing only if appropriate and permitted, and document the referral or consultation. If a lesion is inflamed, do not extract it.

Rule of thumb: when in doubt, do not treat; refer and document.

Texas Cosmetology Laws and Rules

Regulatory frame

Texas cosmetology is regulated by the Texas Department of Licensing and Regulation (TDLR) under Texas Occupations Code Chapter 1602 and TDLR rules in 16 Texas Administrative Code Chapter 83. Know license categories, scope of practice, salon and school licensing, sanitation standards, and renewal and continuing education obligations. A person may perform only services within their license. A salon must hold a current license and display required postings; licensees must keep licenses available. Booth renters and independent contractors still need individual licenses and must work in a licensed salon. Sanitation duties follow the rules regardless of pay structure.

Traps

Do not assume a chair-rental arrangement removes licensing. A salon license is not a personal license and is not freely transferable to a new owner or location. Performing outside scope, ignoring expiration, allowing unlicensed practice, or failing to post required notices are common violations. Rules and fees change, so verify current TDLR requirements rather than memorizing outdated numbers.

Worked example

A booth renter wants to take walk-ins in a friend’s shop. Check that the renter has a current license, the shop has a current salon license, the services are within scope, and sanitation supplies and postings are present. If any item is missing, do not perform the service.

Rule of thumb: check license, licensed salon, scope of practice, and sanitation before every service.

TX Cosmetology cheat sheet

Quick reference

Sanitation, Disinfection, and Safety

  • Cleaning removes visible dirt, oil, and debris with soap and water; disinfection destroys most pathogenic organisms on nonporous surfaces; sterilization destroys all microbial life, including spores.

  • Implements that contact blood or could contact blood must be cleaned, then fully immersed in an EPA-registered hospital-grade disinfectant labeled tuberculocidal, following the label's contact time.

  • Contact time is the number of minutes an item must remain submerged and wet in the disinfectant; it is set by the product label, not by salon preference.

  • Porous items such as nail files, buffers, wooden sticks, cotton, sponges, and porous foot files cannot be effectively disinfected and must be discarded after use or given to the client.

  • Blood or body-fluid spill procedure: stop the service, put on gloves, clean the area with soap and water, disinfect with an EPA-registered hospital disinfectant, and place contaminated materials in a covered container.

  • Hands are washed with soap and water before and after every client; hand sanitizer is not a substitute when hands are visibly soiled.

  • Whirlpool foot spas are drained, cleaned, and disinfected after each client according to the manufacturer's instructions, and the cleaning record must be available for inspection.

  • Chemicals are kept in labeled containers, and a Safety Data Sheet (SDS) for each product used in the salon must be accessible.

  • Electrical tools must be UL-listed and inspected for frayed cords; appliances are unplugged before cleaning and kept away from water sources.

Quick reference

Hair Care and Haircutting

  • Hair has three layers: the cuticle (outer protective scales), the cortex (middle layer holding melanin and most of the hair's strength and elasticity), and the medulla (central core, sometimes absent).

  • Hair and scalp pH is approximately 4.5 to 5.5; alkaline products swell the hair and raise the cuticle, while acidic products contract the hair and smooth the cuticle.

  • Growth cycle phases: anagen (active growth, lasts years), catagen (transition, a few weeks), telogen (resting and shedding, about three months).

  • Elevation angle determines the cut: 0 degrees produces a one-length cut, 45 degrees a graduated cut, 90 degrees a uniformly layered cut, and 180 degrees a long-layered cut.

  • Wet hair stretches roughly 40 to 50 percent of its length before breaking, compared with about 20 percent when dry, so wet hair is more fragile under tension.

  • Shampoo is worked into the scalp with the pads of the fingers, not the nails; conditioner is applied mainly from mid-shaft to the ends.

  • Aniline-derivative (oxidative) hair color requires a patch test 24 to 48 hours before application, per the manufacturer's directions.

  • Point cutting, slide cutting, and notching remove bulk or blend weight without creating a blunt line and are performed on the ends or interior, not at the scalp line.

  • Blow-dryer airflow is directed from scalp toward ends, following the cuticle direction, to produce a smooth finish.

Quick reference

Nail Care

  • Nail structures include the nail plate, nail bed, matrix (which produces the plate), lunula (visible portion of the matrix), eponychium, hyponychium, free edge, sidewalls, and nail folds.

  • The nail plate grows from the matrix at about one-eighth inch (approximately 3 mm) per month; growth is faster in summer, on the dominant hand, and in younger clients.

  • The eponychium is living tissue and is not cut; it is softened and pushed back, and nippers are used only on hangnails or clearly dead tissue.

  • Conditions not treated in the salon include onychomycosis (fungal infection), paronychia (infection of the nail fold), and onycholysis (plate separation); the client is referred to a physician.

  • Metal implements are cleaned and fully immersed in disinfectant after each client; porous files and buffers are single-use or kept by the client.

  • Pedicure equipment: after every client, drain and clean the basin with soap and water, then disinfect with an EPA-registered disinfectant for the label's contact time, and record the cleaning.

  • Polish is applied in thin coats (base coat, two color coats, top coat); thick coats dry unevenly and trap solvent, causing bubbles and smudging.

  • In sculptured nails, the monomer-to-polymer ratio controls set time and strength; an overly wet bead shrinks and lifts, while an overly dry bead is brittle.

  • Excessive filing or drilling thins the nail plate and can cause sensitivity, lifting, and infection; the plate is not reduced below its natural thickness.

Quick reference

Skin Care

  • The epidermis is the avascular outer layer; the dermis contains blood vessels, nerves, glands, and collagen; the subcutaneous layer is fat and insulation.

  • The acid mantle of skin is about pH 4.5 to 5.5; alkaline cleansers strip it and increase dryness and irritation.

  • Skin types are normal, dry, oily, combination, and sensitive; the Fitzpatrick scale (I through VI) classifies sun reactivity and burning tendency.

  • Exfoliants are mechanical (scrubs, brushes) or chemical: AHA/glycolic acid works mainly at the surface, while BHA/salicylic acid penetrates oil-filled pores.

  • Contraindications for facial services include open lesions, sunburn, recent laser or waxing, active cold sores, and known product allergy.

  • Waxing technique: test wax temperature, apply in the direction of hair growth, hold the skin taut, and remove against the direction of growth.

  • Massage movements are effleurage (gliding), petrissage (kneading), tapotement (tapping), friction, and vibration; facial movements generally travel upward and outward.

  • Extractions are performed only on softened, prepared skin with proper technique and are avoided on inflamed, cystic, or broken skin.

  • Sunscreen of SPF 30 or higher, reapplied about every two hours outdoors, reduces photoaging and skin cancer risk.

Quick reference

Texas Cosmetology Laws and Rules

  • Cosmetology in Texas is governed by Texas Occupations Code Chapter 1602 and administered through rules in 16 Texas Administrative Code Chapter 83.

  • The Texas Department of Licensing and Regulation (TDLR) issues and renews cosmetology licenses for cosmetologists, estheticians, and manicurists, as well as establishment and school licenses.

  • A salon may not operate without a current establishment license, and that license must be posted where clients can see it.

  • A licensee must keep the individual license displayed at the workstation while providing services.

  • TDLR representatives may enter and inspect a licensed salon or school during business hours without prior notice to check compliance with licensing and sanitation rules.

  • Performing cosmetology services for compensation without a license, or allowing an unlicensed person to work in a salon, is a violation subject to administrative penalties and criminal charges.

  • Continuing education hours required for renewal are set by TDLR rule and must be completed and documented before the license expires.

  • A student in a licensed school may perform services only under instructor supervision and may not accept payment from the client for those services.

  • Working on an expired license is unlicensed practice; the license must be renewed before its expiration date to continue working.

TX Cosmetology key terms

Sanitation

Cleaning surfaces and tools with soap and water or detergent to remove visible dirt, oil, and many germs. It reduces contamination but does not destroy all pathogens, so it comes before disinfection.

Related: Disinfection, Cross-contamination
Disinfection

Using an EPA-registered hospital-grade product on cleaned nonporous implements to destroy most disease-causing organisms. It does not kill all bacterial spores, so it is not the same as sterilization.

Related: Sanitation, Sterilization, Contact time
Sterilization

A process that destroys all microorganisms, including bacterial spores, on an implement. In salons it is used mainly for metal tools and is usually done with steam under pressure in an autoclave.

Related: Disinfection, Nonporous implement
EPA-registered hospital-grade disinfectant

A product approved by the Environmental Protection Agency for use in healthcare settings. The label lists the pathogens it kills and the contact time required for salon use on nonporous tools.

Related: Disinfection, Contact time
Contact time

The number of minutes an implement must stay completely wet with disinfectant, as stated on the product label. Shortening this time means pathogens may survive and the tool is not properly disinfected.

Related: EPA-registered hospital-grade disinfectant, Disinfection
Porous implement

A tool or material that absorbs liquid, such as wooden sticks, cotton, or paper files. Because disinfectant cannot penetrate it, a porous item must be discarded after one client rather than reused.

Related: Nonporous implement, Cross-contamination
Nonporous implement

A hard, smooth tool that does not absorb liquids, such as metal shears, combs, or glass. It can be cleaned, disinfected, and reused when salon rules are followed.

Related: Porous implement, Disinfection
Cross-contamination

The spread of germs from one person or object to another by hands, tools, linens, or surfaces. Proper handwashing, cleaning, and disinfection break this chain in the salon.

Related: Sanitation, Universal precautions
Universal precautions

A safety practice of treating all blood and body fluids as if they carry infectious disease. It means wearing gloves and using barriers for every client, not only those who look sick.

Related: Bloodborne pathogens, Cross-contamination
Bloodborne pathogens

Disease-causing microorganisms carried in blood, such as hepatitis B, hepatitis C, and HIV. Salon workers prevent exposure by using gloves, barriers, and safe handling of sharp tools.

Related: Universal precautions, Cross-contamination
Elevation

The angle at which a strand of hair is held away from the head while cutting. Low elevation builds weight and length; higher elevation creates layers and removes weight.

Related: Blunt cut, Graduated haircut, Uniform layers
Blunt cut

A cut in which all hair is held at zero elevation and cut at one length, creating a solid, heavy perimeter line. It is also called a one-length cut.

Related: Elevation, Graduated haircut
Graduated haircut

A cut that uses slight elevation, often at the back, so hair is stacked shorter at the perimeter and longer toward the crown. It creates a wedge or stacked shape with weight at the bottom.

Related: Elevation, Uniform layers
Uniform layers

A layered cut in which hair is held at 90 degrees from the head throughout, so all layers are the same length. It adds movement and removes bulk evenly.

Related: Elevation, Graduated haircut
Sectioning

Dividing the hair into organized working areas with clips and partings before a service. Good sectioning keeps cuts balanced and makes the service faster and safer.

Related: Elevation
Clipper-over-comb

A cutting technique in which a comb is used as a guard and the clipper runs over it to shorten hair. It is common for tapering and blending short haircuts.

Related: Elevation
Texturizing

Removing bulk or creating irregular lengths so hair has movement, softness, or a piecey look. It is done with thinning shears, a razor, or point cutting and should not be overused.

Related: Elevation
Hair porosity

The ability of hair to absorb and hold moisture, rated low, normal, or high. High porosity hair takes in moisture quickly but loses it fast and needs gentle conditioning.

Relaxer

A chemical product with a high pH that straightens curly or wavy hair by breaking bonds in the hair. It requires careful timing, patch testing, and a neutralizer to stop the process.

Related: Neutralizer
Neutralizer

A low-pH shampoo used after a relaxer to stop the chemical action and help restore the hair's normal pH. It must be used completely or the hair can continue to break.

Related: Relaxer
Nail plate

The visible hard part of the nail made of keratin, covering the nail bed. It protects the fingertip and its appearance can show health or disease.

Related: Nail bed, Matrix
Nail bed

The skin directly beneath the nail plate. It looks pink because it contains many blood vessels, and it supports the nail plate as it grows.

Related: Nail plate, Matrix
Matrix

The area at the base of the nail where new cells form and push forward to create the nail plate. Injury or disease here can permanently affect nail growth.

Related: Nail plate, Nail bed
Cuticle

The thin, dead tissue that seals the base of the nail plate to the skin. It should be softened and pushed back gently, not cut, to avoid infection.

Related: Eponychium
Eponychium

The living skin at the base of the nail that many people mistakenly call the cuticle. It protects the nail matrix and should never be cut during a manicure.

Related: Cuticle
Onychomycosis

A fungal infection of the nail that can cause thickening, discoloration, and separation from the nail bed. A nail technician should not treat it and should refer the client to a physician.

Related: Nail plate
Nail primer

A liquid applied to the natural nail plate before acrylic or gel enhancements to improve adhesion. It must be used sparingly and kept off skin and eyes.

Related: Nail plate
Epidermis

The outer, thinnest layer of skin and the body's first barrier against infection and water loss. It has no blood vessels and its outer cells are constantly shed and replaced.

Related: Dermis
Dermis

The middle layer of skin, containing nerves, blood vessels, oil and sweat glands, and collagen. It gives skin strength and supplies the epidermis with nutrients.

Related: Epidermis, Sebaceous glands
Sebaceous glands

Oil glands in the skin, usually attached to hair follicles, that produce sebum. Sebum lubricates skin and hair and can contribute to acne when follicles become blocked.

Related: Sudoriferous glands, Comedone
Sudoriferous glands

Sweat glands in the skin that help regulate body temperature. Eccrine glands are found over most of the body, while apocrine glands are in the underarms and genital area.

Related: Sebaceous glands
Comedone

A hair follicle blocked by oil and dead skin cells. An open comedone is a blackhead; a closed comedone is a whitehead, and squeezing it can cause inflammation or scarring.

Related: Sebaceous glands
Fitzpatrick scale

A six-point scale that classifies skin by color and how it responds to sun exposure, from very fair to deeply pigmented. It helps estheticians choose safe treatment intensity and sun protection advice.

TDLR

The Texas Department of Licensing and Regulation, the state agency that issues cosmetology licenses and enforces salon rules. It inspects salons and can fine or discipline license holders.

Related: 16 TAC Chapter 83, Administrative penalty
16 TAC Chapter 83

The part of the Texas Administrative Code that contains the official cosmetology rules, including licensing, sanitation, and scope of practice. Licensees are expected to know and follow it.

Related: TDLR, Scope of practice
Scope of practice

The services and tasks a person may legally perform under a specific license type, such as cosmetologist, esthetician, or nail technician. Doing work outside that scope can lead to discipline.

Related: TDLR, 16 TAC Chapter 83
Continuing education

Approved training hours a licensee must complete before renewing a Texas cosmetology license. The required hours and approved providers are set by TDLR rules.

Related: License renewal
License renewal

The process of keeping a Texas cosmetology license active by paying the required fee and meeting continuing education and other rules before the expiration date.

Related: Continuing education, TDLR
Booth rental

An arrangement in which a licensed professional rents space in a salon and works as an independent contractor rather than an employee. The salon must still follow sanitation and licensing rules.

Related: Scope of practice
Administrative penalty

A money fine that TDLR can impose on a licensee or salon for breaking cosmetology laws or rules. It is one form of disciplinary action and may be appealed.

Related: TDLR

TX Cosmetology study plan

8 weeks · About 6 hours per week

Week 1

Sanitation, Disinfection, and Safety

  • Sort 25 salon tools, implements, and surfaces into noncritical, semicritical, and critical categories and name the required level of control for each.

  • Write out, without notes, the two-step cleaning-then-disinfecting procedure and the label contact time for quats, bleach, and hospital-grade disinfectants.

  • Distinguish sanitation, disinfection, and sterilization and give one salon example of each.

  • Identify five workplace hazards (slips, cord and electrical, chemical mixing, blood or body-fluid exposure, ergonomics) and state the required corrective action for each.

Your checkpoint

One-page 'Levels of Control' chart with 25 items correctly sorted and contact times listed; self-checked to 90% accuracy.

Week 2

Sanitation, Disinfection, and Safety & Texas Cosmetology Laws and Rules

  • Apply blood-exposure and contaminated-waste procedures to five written scenarios and select the correct response for each.

  • Map the structure of Texas Occupations Code Chapter 1602 and the TDLR cosmetology rules, marking where sanitation, licensing, and scope-of-practice requirements sit.

  • Define each license and shop type (cosmetologist, esthetician, manicurist, instructor, salon) and state what each may and may not perform.

  • Rewrite each Domain 1 safety procedure as a Texas rule citation so every habit you practice matches the requirement.

Your checkpoint

25-question mixed quiz on Domains 1 and 5 scored at 80% or higher, with each missed item rewritten as a correct statement.

Week 3

Hair Care and Haircutting

  • Analyze hair and scalp (texture, density, porosity, elasticity, scalp condition) across five written case profiles and record findings.

  • Match shampoo, conditioner, and treatment type and pH range to each analyzed hair condition.

  • Diagram the four basic haircut structures plus the sectioning, parting, and distribution lines used to build each.

  • Explain how haircutting and chemical-service tools are cleaned and disinfected between clients.

Your checkpoint

Completed hair analysis worksheet for five cases with a justified product and service recommendation for each.

Week 4

Hair Care and Haircutting & Texas Cosmetology Laws and Rules

  • Sequence a relaxer, permanent wave, and color service end to end, including patch test, strand test, and client release steps.

  • Apply Texas rules on client records, patch-test documentation, and salon sanitation to ten scenario items.

  • Calculate processing times and select developer or relaxer strength and neutralizing steps for three case profiles.

  • Review every missed item from Weeks 1 through 3 and rewrite each as a rule or procedure statement.

Your checkpoint

Timed 40-question quiz on Domains 1, 2, and 5 scored at 80% or higher, with a remediation list of no more than five items.

Week 5

Nail Care

  • Label the structures of the natural nail and surrounding skin from memory.

  • Differentiate nail disorders and infections from conditions a manicurist may service, and name the ones requiring physician referral.

  • Sequence a complete manicure and pedicure, including client screening, implement handling, and disinfection between clients.

  • State the safety, storage, and ventilation requirements for acrylics, gels, and monomer use.

Your checkpoint

30 self-made flashcards on nail anatomy, disorders, and disinfection, sorted into 'refer' and 'service' piles at 90% accuracy.

Week 6

Nail Care & Skin Care

  • Describe proper removal of nail tips, wraps, and enhancements without damaging the natural nail.

  • Identify the layers and functions of the skin and match each skin type to appropriate product selection.

  • Classify primary and secondary skin lesions and list those that are contraindications to service.

  • Compare nail and skin sanitation requirements and note where they differ.

Your checkpoint

Hand-drawn, fully labeled skin diagram reproduced from memory plus a lesion classification list covering 15 examples.

Week 7

Skin Care

  • Sequence a basic facial from consultation and cleansing through exfoliation, extractions, massage, masking, and sun protection.

  • Match each massage manipulation to its intended effect and identify areas to avoid.

  • Screen five client profiles for contraindications and state the correct course of action for each.

  • Explain how facial equipment, implements, and linens are cleaned and disinfected between clients.

Your checkpoint

Timed 30-question skin care quiz scored at 85% or higher plus a one-page facial protocol checklist.

Week 8

Texas Cosmetology Laws and Rules

  • Recite Texas licensure requirements, renewal cycle, continuing education, and salon sanitation rule requirements without notes.

  • Translate the ten most-missed items from Weeks 1 through 7 into rule-based statements and re-test on them.

  • Complete two full-length timed practice exams under test-day conditions.

  • Build a final one-page summary sheet with one high-yield fact per domain.

Your checkpoint

Two timed mixed practice exams scored at 85% or higher, with a one-page error log and a final summary sheet.

Milestones

Week 2: Domain 1 self-test at 85% or higher and a completed laws/rules outline covering licensing, sanitation, and scope of practice.

Week 4: 80% or higher on the timed 40-question quiz covering Domains 1, 2, and 5, with a remediation list of five or fewer items.

Week 6: 85% or higher across the nail and skin quizzes combined, and no unresolved 'refer vs. service' errors on the disorder sort.

Week 8: Two full-length practice exams at 85% or higher and an error log showing no concept missed more than once.

TX Cosmetology exam day

Your checklist

Unexpired government-issued photo ID

Bring a state driver's license, state ID card, passport, or military ID. The name must match your exam registration exactly; if your name has changed, confirm with the provider which documentation resolves the mismatch before test day.

Appointment confirmation or admission document

Print or save the confirmation showing your name, appointment time, and test location. Some providers require the eligibility or admission letter, so confirm with the provider which documents you must present at check-in.

Approved supply kit

Obtain the provider's current practical supply list and pack only those items in the container allowed. Whether the provider supplies the kit or you must bring your own varies by site, so confirm with the provider.

Mannequin or practice head requirements

Confirm with the provider whether a mannequin/head is supplied at the station or whether you must bring one, and what hair length or type is required.

Dress code compliant clothing

Professional attire or a uniform, closed-toe shoes, and hair pulled back away from the face. Confirm the specific dress code and whether a lab coat or apron is required with the provider.

Clean, short nails and minimal jewelry

Keep nails short and clean and remove rings, bracelets, watches, and dangling jewelry so they do not interfere with services or sanitation steps.

Water and a light snack

Bring water in a sealed container and a small snack if the site permits food and drink. Confirm the site's policy, since some testing rooms prohibit outside items.

Travel and parking plan

Confirm the address, parking availability, and check-in time the day before. Plan to arrive well before your appointment; many providers deny entry to late candidates, so confirm the late-arrival policy with the provider.

Sanitation sequence review

Rehearse the setup and sanitation steps you will be scored on: hand washing, station disinfection, tool sanitation, and proper disposal. Practical scoring typically hinges on these required steps, not just the finished look.

Timed section practice

Review each service section and its time limit so you can finish within the clock. Confirm current time limits and section list with the provider, as these can be updated.

Exam fee receipt or payment method

Confirm whether your exam fee was prepaid through your registration or is collected at the site, and which payment methods the site accepts.

Plan the day

72 hours before

Reread the provider's candidate bulletin and your appointment confirmation. Confirm the supply list, dress code, ID requirements, and check-in time with the provider. Pack your kit and inspect every tool for cleanliness and function, replacing anything broken. Run at least one full timed walkthrough of the sections.

24 hours before

Pack your bag: ID, confirmation, kit, clothing, water, snack. Confirm the location, parking, and travel time, and set two alarms. Do not start using new products or tools the night before. Get a full night of sleep.

Morning of

Eat a real meal and hydrate. Dress to the confirmed dress code, pull hair back, and remove jewelry. Leave earlier than the map estimates. Arrive before the check-in time and have your ID and confirmation in hand.

At check-in

Follow staff instructions, present your ID and documents, and store personal items where directed. Listen to the orientation and ask procedural questions before the test begins, not during a section.

During the test

Work section by section at the pace you practiced. Sanitize your hands and station at the required points, keep your tools organized, and do not skip a required step to save time. Watch the clock and leave yourself time to clean up. Do not talk to or watch other candidates.

After the test

Follow the provider's checkout instructions, retrieve your belongings, and confirm how and when results are issued. Do not discuss specific test content with other candidates.

Rules to check

  • Present an unexpired government-issued photo ID with a name matching your registration. Candidates without acceptable ID are typically turned away; confirm acceptable alternate documents with the provider in advance.

  • Arrive by the stated check-in time. Late arrivals may be denied entry and forfeit the fee, so confirm the provider's late-arrival policy before test day.

  • Phones, smart watches, and other electronic devices are not permitted in the testing area. Leave them secured as directed.

  • No talking, coaching, or observing other candidates during the test. Communicate only with examiners, and only for procedural clarifications.

  • Sanitation steps and safety procedures are scored, and skipping required steps can cost points or result in failure. Perform them visibly and in the required order.

  • Breaks are only at times the examiners announce. Do not leave the testing area without permission.

  • Scoring is based on the provider's checklist of required steps and finished results for each section. Results and retake procedures are issued by the provider, so confirm the timeline and any retake rules with them.

  • If you must reschedule, follow the provider's notice requirements; short-notice changes often carry a fee or forfeiture. Confirm the exact window with the provider.

TX Cosmetology FAQ

How many TX Cosmetology practice questions are available?

The practice set has 200 TX Cosmetology questions. Each one includes the choices, the correct answer, and an explanation, and the set is free to read with no signup.

How many TX Cosmetology flashcards are available?

The flashcard set has 32 TX Cosmetology cards. Each card shows the term and its definition.

Which topics does the TX Cosmetology study material cover?

The TX Cosmetology study material has 5 sections, including Sanitation, Disinfection, and Safety, Hair Care and Haircutting, and Nail Care.

What format facts does the catalog list for the TX Cosmetology exam?

The catalog lists these item types: multiple choice for the TX Cosmetology exam.