RPSGT Practice Test

Registered Polysomnographic Technologist (RPSGT)

RPSGT overview

  • 200 practice questions
  • 32 flashcards
  • 4 study guide topics
  • 38 key terms

What you'll study

  • Patient and equipment preparation for polysomnographic testing25%
  • Polysomnographic data acquisition and monitoring25%
  • Scoring, interpretation, and report generation25%
  • Therapeutic interventions, patient safety, and professional standards25%

The Registered Polysomnographic Technologist (RPSGT) credential is awarded by the Board of Registered Polysomnographic Technologists (BRPT), an independent nonprofit certification board that describes itself as setting the professional standard for sleep health professionals. First administered in 1979, the RPSGT is described by BRPT as the internationally recognized gold standard certification for sleep professionals; 16,728 certifications were current as of March 25, 2026, and BRPT reports credential holders in 34 countries.

The credential is intended for people already working in sleep technology who are ready to demonstrate full clinical competency: performing and scoring sleep studies, applying clinical knowledge in real-world settings, and meeting professional standards for patient care. Candidates need clinical experience in polysomnography, relevant education or training, and a current BLS certification or equivalent; BRPT offers multiple eligibility pathways based on training and experience.

Exam content specifications and domain weighting are published in the RPSGT Exam Blueprint. BRPT also provides study guides aligned to the current blueprint, recommended readings, and online practice exams in the same format as the real exam, while eligibility rules, exam procedures, and day-of-test requirements appear in the RPSGT Candidate Handbook. The credential must be renewed every 5 years.

Common mistakes

Places EOG and chin EMG electrodes from a memorized list rather than from anatomical landmarks - swapping left/right eye channels, placing eye electrodes on the brow, or putting the chin electrodes on the jawline instead of the submental/mentalis area - and then can't recognize the resulting out-of-phase or attenuated signals.

Candidates memorize channel names as abbreviations (LOC, ROC, Chin1/2) without ever anchoring them to bony landmarks, so a stem that describes placement in words (rather than showing a picture) exposes the gap.

What to do instead

Rebuild placement from landmarks every time you study: left eye electrode roughly 1 cm above and 1 cm lateral to the left outer canthus, right eye electrode 1 cm below and 1 cm lateral to the right outer canthus (so the eyes move in opposite directions on the tracing), and chin EMG electrodes under the lower lip along the midline on the mentalis, with a second chin channel offset a couple of centimeters for a bipolar pair. Quiz yourself by describing placements aloud without notes.

Skips or rushes the pre-study patient assessment - no medication and substance history (benzodiazepines, SSRIs, opioids, alcohol, caffeine), no review of prior studies or PAP use, no documentation of presenting symptoms - and then cannot interpret an unusual night or answer a question about how a drug would change the record.

Setup is treated as a purely technical task, and under time pressure the interview is the first thing dropped.

What to do instead

Use a fixed intake checklist every time: medications and timing, caffeine/alcohol/nicotine, sleep schedule and naps, prior PSG/MSLT results, PAP or oral appliance use, comorbidities, and current symptoms. Practice stating, for a given drug class, which stage or event type it is likely to shift.

Accepts whatever signal appears - failing to measure and correct electrode impedance, and skipping or faking the biocalibration (asking the patient to blink, look up/down/left/right, clench, sniff, breathe, move each leg) before lights out.

The tracing 'looks fine' on screen, so the step feels optional; candidates also underestimate how many exam items hinge on recognizing a technically invalid record.

What to do instead

Make impedance measurement and biocalibration non-negotiable and know the acceptance criteria cold (keep impedances low and balanced; high impedance drives artifact and baseline sway). Learn the purpose of each biocalibration maneuver - which channel it should deflect and in which polarity - so you can spot a misconnected or dead channel before the study starts.

Sees artifact on the tracing (60 Hz interference, sweat/sway, electrode pop, pulse or ECG artifact in the EEG, snore vibration in the chin) but neither corrects it nor documents what was done, and cannot name a likely cause when asked.

Pattern recognition without a troubleshooting loop: candidates learn what artifact looks like but never practice 'identify → likely cause → action → document.'

What to do instead

Build a two-column table you can recite: artifact signature → cause and corrective action (check/replace the electrode and its impedance, re-prep the skin, reposition the wire away from movement, adjust the patient's position, verify reference and ground). Always timestamp a tech note when you intervene, so the record shows why the data changed.

Misapplies recording parameters - wrong filter settings for the channel type, wrong derivations for the EEG montage, or failure to verify that the intended channels are actually being acquired - and then misreads the resulting tracing.

Parameters are treated as default settings that 'someone else' configured, so the candidate never learns why a low-frequency or high-frequency filter setting changes the appearance of slow waves, sweat artifact, or EMG.

What to do instead

Learn the standard settings as a matched set (EEG and EOG recorded with a low-frequency filter around 0.3 Hz and a high-frequency filter around 35 Hz; EMG with a wider high-frequency band; ECG filtered separately) and learn the consequence of moving each one. For montages, be able to state which electrode is the active and which is the reference in each derivation and what a reversed connection would look like.

Scores arousals on the strength of a brief EEG speed-up alone - not confirming a sustained abrupt shift of at least 3 seconds, not requiring a stretch of stable sleep beforehand, and not requiring a concurrent increase in chin EMG when the shift occurs in REM.

The '3 seconds' number is the only part that gets memorized; the conditional REM rule and the stable-sleep prerequisite are forgotten because they only appear in edge cases.

What to do instead

Score arousals with a three-question checklist every time: (1) is there an abrupt frequency shift lasting at least 3 seconds? (2) was there adequate stable sleep immediately before it? (3) if this is REM, is there a simultaneous chin EMG rise? Only then count it and mark it.

Botches stage-continuation and stage-transition rules - scoring N2 in an epoch with no K-complex or spindle and no qualifying continuation, keeping a patient in REM through an arousal or a stretch of elevated chin EMG, or ending N2/N3 at the wrong boundary.

Stage rules are conditional and order-dependent, so candidates who memorize single facts rather than a decision sequence misapply them at transitions, which is exactly where exam items cluster.

What to do instead

Write out a decision tree per stage and run epochs through it in order (wake rules first, then N1/N2/N3/REM entry and continuation tests). Specifically drill the continuation clauses: what keeps a patient in N2 when no spindle or K-complex appears, and what keeps a patient in REM when rapid eye movements are absent.

Computes summary indices against the wrong denominator or conflates them - dividing events by total recording time instead of total sleep time, treating AHI and RDI as the same number, or reporting an oxygen desaturation index as if it were an apnea-hypopnea index.

The formulas look interchangeable on paper, and candidates rarely practice computing them from a stripped-down data set.

What to do instead

Fix the definitions by hand once: apnea-hypopnea index = apneas plus hypopneas divided by hours of sleep; respiratory disturbance index adds respiratory effort-related arousals to that numerator; desaturation index comes from oximetry events alone. Then practice with a made-up night's totals (events, sleep time, recording time) and compute all three from the same numbers.

Titrates positive airway pressure by reflex - bumping pressure for every event on the screen without separating obstructive from central events, without checking whether the events occurred in REM or supine, and without stating the endpoints that define a completed titration.

The mechanics of changing pressure are easy to learn, so the decision logic and stopping criteria get skipped.

What to do instead

Memorize the titration goal as a list you can recite: abolish apneas, hypopneas, respiratory effort-related arousals, and snoring; keep oxyhemoglobin saturation at or above the accepted target; ensure the endpoints are met in REM and in the supine position. Separately learn what to do when events persist despite pressure or when the events are central rather than obstructive - that is a different clinical path, not a higher pressure.

Treats the safety and professionalism content as filler and cannot answer scenario items - what to do in a medical emergency in the lab, how to handle oxygen and fire risk, how to protect patient confidentiality and study data, or when a finding is critical enough to escalate to the physician rather than wait for the morning report.

This domain is broad and non-technical, so it gets deferred to 'later' and never systematically reviewed.

What to do instead

Study these as short, testable protocols: the lab's emergency response sequence and how to summon help without abandoning the patient; oxygen handling and ignition-source rules; infection control and equipment cleaning between patients; confidentiality rules for records and images; and a clear list of critical findings (significant arrhythmia, severe desaturation, seizure, behavioral emergency) that require immediate notification rather than documentation alone.

Exam requirements can change. Confirm current details with the exam provider.

RPSGT practice

200 questions. Each one lists the choices, the correct answer, and an explanation. With JavaScript, this list opens one question at a time. The checker at the top of this page saves progress in this browser when it is available.

  1. Question 1Patient and equipment preparation for polysomnographic testing

    Which action best prepares the skin before attaching a surface electrode?

    1. Warm the site with a heating pad
    2. Cover the site with a protective dressing
    3. Apply a moisturizing lotion to the site
    4. Cleanse with alcohol and gently abrade the site Correct answer.

    Explanation

    Alcohol removes surface oils, and light abrasion reduces the high-resistance outer layer of skin. Together these steps lower impedance and improve signal quality. Lotions and dressings interfere with adhesion and electrical contact.

  2. Question 2Patient and equipment preparation for polysomnographic testing

    Which pair of EOG electrode positions is standard for a sleep study?

    1. Above the right canthus and below the left canthus Correct answer.
    2. On each mastoid process behind the ears
    3. Both electrodes on the chin, spaced about 3 cm apart
    4. At the nasion and at the inion

    Explanation

    Standard EOG electrodes sit near the outer canthi, one offset above and one below. This arrangement makes the eyes produce out-of-phase deflections during vertical and horizontal movements.

  3. Question 3Patient and equipment preparation for polysomnographic testing

    Chin EMG electrodes are typically placed in which location?

    1. On the mastoid processes behind each ear
    2. Midline submental region Correct answer.
    3. On the forehead just above the eyebrows
    4. Over each masseter muscle on the jaw

    Explanation

    Submental placement along the midline over the bony chin captures genioglossus muscle tone. It also minimizes artifact from jaw movement and keeps the electrodes away from major facial muscles.

  4. Question 4Patient and equipment preparation for polysomnographic testing

    Which site is preferred for placing a pulse oximeter probe?

    1. The earlobe of a patient with poor peripheral perfusion
    2. The arm with an automatic blood pressure cuff
    3. A warm, well-perfused index finger Correct answer.
    4. A finger with acrylic nail polish

    Explanation

    Fingertip probes work best on warm, well-perfused digits with clear light transmission. Sites with inflating cuffs, poor perfusion, or nail polish produce unreliable readings.

  5. Question 5Patient and equipment preparation for polysomnographic testing

    Which room condition is most appropriate for a sleep study?

    1. Brightly lit for technologist visibility
    2. Warm and humid to promote drowsiness
    3. Noisy enough to mask outside sounds
    4. Dark, quiet, and comfortably cool Correct answer.

    Explanation

    A dark, quiet, comfortably cool room supports sleep onset and maintenance. Excess light, heat, humidity, and noise all fragment sleep and can alter the study results.

  6. Question 6Patient and equipment preparation for polysomnographic testing

    Before attaching sensors, the technologist should first:

    1. Apply all electrodes without speaking to save time
    2. Explain each sensor and answer questions Correct answer.
    3. Ask the patient to sign a waiver refusing information
    4. Turn off the lights and leave the room

    Explanation

    Informed explanation before sensor application supports patient cooperation and respects consent. It also reduces anxiety, which can affect sleep onset and study quality.

  7. Question 7Patient and equipment preparation for polysomnographic testing

    Which placement describes a modified lead II ECG for polysomnography?

    1. One electrode on each ankle
    2. Both electrodes on the right shoulder
    3. One electrode on the forehead and one on the chin
    4. Below the right clavicle and left lower ribs Correct answer.

    Explanation

    A modified lead II uses one electrode below the right clavicle and one over the lower left rib cage. This axis produces a clear QRS complex for detecting arrhythmias and cardiac artifact.

  8. Question 8Patient and equipment preparation for polysomnographic testing

    How is the body position sensor typically used during a sleep study?

    1. Attached to the bed frame to detect movement
    2. Worn on the wrist like a watch
    3. Placed under the pillow to detect head turning
    4. Secured to the chest to detect posture Correct answer.

    Explanation

    The position sensor is secured to the torso so it can detect supine, prone, and lateral postures. Body position is essential for scoring respiratory events, which vary with posture.

  9. Question 9Patient and equipment preparation for polysomnographic testing

    What impedance reading is generally acceptable for EEG electrodes before recording?

    1. 50 kΩ or less
    2. 20 kΩ or less
    3. 5 kΩ or less Correct answer.
    4. 100 kΩ or less

    Explanation

    Acceptable EEG electrode impedance is generally 5 kΩ or less. Higher values indicate poor contact, which increases noise and artifact. Sites reading above 10 kΩ usually need re-preparation.

  10. Question 10Patient and equipment preparation for polysomnographic testing

    Fpz is marked at what percentage of the nasion-inion distance above the nasion?

    1. 50%
    2. 10% Correct answer.
    3. 25%
    4. 75%

    Explanation

    In the 10-20 system, the frontal pole electrode Fpz lies 10% of the nasion-inion distance above the nasion. The vertex, Cz, lies at the 50% point.

  11. Question 11Patient and equipment preparation for polysomnographic testing

    On the midline, Cz is located at the point that is:

    1. 25% behind the nasion
    2. At the eyebrow line
    3. Midway between nasion and inion Correct answer.
    4. 10% above the inion

    Explanation

    Cz is the vertex electrode, found at the midpoint of the nasion-inion line. It also lies midway between the preauricular points on the coronal plane.

  12. Question 12Patient and equipment preparation for polysomnographic testing

    For a long overnight recording on a patient with oily hair, which technique best secures EEG electrodes?

    1. Collodion, well ventilated Correct answer.
    2. Adhesive tape over dry electrodes
    3. Water-soluble paste only
    4. An elastic headband, no paste

    Explanation

    Collodion provides a durable bond that withstands movement and oily hair over a full night. Because it contains volatile solvents, it must be used with adequate ventilation.

  13. Question 13Patient and equipment preparation for polysomnographic testing

    Which sensor is preferred for detecting hypopneas during polysomnography?

    1. Thermistor
    2. Pulse oximeter
    3. Snore microphone
    4. Nasal pressure transducer Correct answer.

    Explanation

    A nasal pressure transducer detects the subtle pressure changes of partial airflow obstruction. It is therefore more sensitive than a thermistor for identifying hypopneas.

  14. Question 14Patient and equipment preparation for polysomnographic testing

    Where is the snore sensor usually placed?

    1. On the forehead
    2. On the earlobe
    3. On the chest
    4. Over the larynx Correct answer.

    Explanation

    The snore sensor is placed on the neck over the larynx so it can pick up vibrations from snoring. This location provides a clear acoustic signal during sleep.

  15. Question 15Patient and equipment preparation for polysomnographic testing

    How should respiratory effort belts be positioned?

    1. Both belts over the upper chest
    2. Both belts around the hips
    3. One around the neck and one around the waist
    4. Lower rib cage and umbilicus Correct answer.

    Explanation

    One belt is placed over the lower rib cage to record thoracic effort and one at the umbilicus to record abdominal effort. Comparing the two helps distinguish obstructive from central events.

  16. Question 16Patient and equipment preparation for polysomnographic testing

    What instruction about caffeine should be given before an overnight sleep study?

    1. Take caffeine only if you feel drowsy during the test
    2. Avoid caffeine for at least several hours before bedtime Correct answer.
    3. Drink coffee at bedtime to fall asleep faster
    4. Caffeine has no effect on sleep and can be used freely

    Explanation

    Caffeine is a stimulant with a half-life of several hours, so it can delay sleep onset and fragment sleep. Patients are typically asked to avoid it for several hours before the study.

  17. Question 17Patient and equipment preparation for polysomnographic testing

    When fitting a CPAP mask, the technologist should:

    1. Fit supine and check for leaks at treatment pressure Correct answer.
    2. Tighten the straps as much as possible to prevent leaks
    3. Choose the largest mask available to ensure a seal
    4. Fit the mask while the patient is standing and the device is off

    Explanation

    Mask fit is assessed with the patient supine and the device at treatment pressure, because tissue position and airflow change the seal. Leak checks at that point allow proper strap adjustment.

  18. Question 18Patient and equipment preparation for polysomnographic testing

    Before recording begins, biologic calibration is performed to:

    1. Measure the patient's blood pressure and pulse
    2. Confirm each channel responds to a signal Correct answer.
    3. Test the patient's hearing and vision
    4. Set the room temperature

    Explanation

    Biologic calibration confirms that each channel responds appropriately to a known physiologic signal. It verifies electrode integrity and amplifier function before data collection.

  19. Question 19Patient and equipment preparation for polysomnographic testing

    Two adjacent EEG electrodes show identical signals and very low impedance. What is the most likely cause?

    1. The amplifier gain is too high
    2. The patient is sweating
    3. The electrodes are placed too far apart
    4. Conductive gel has bridged the electrodes Correct answer.

    Explanation

    When gel or paste connects two electrodes, current flows between them and their signals become nearly identical. This bridging produces falsely low impedance and must be corrected by cleaning and re-preparing the sites.

  20. Question 20Patient and equipment preparation for polysomnographic testing

    After a sleep study, reusable electrodes should be:

    1. Disinfected according to the manufacturer's instructions Correct answer.
    2. Cleaned with a dry cloth only
    3. Stored without cleaning until the next patient
    4. Rinsed with water only

    Explanation

    Reusable electrodes contact skin and biologic material, so they require disinfection between patients. Following the manufacturer's instructions ensures effective cleaning without damaging the electrode.

  21. Question 21Patient and equipment preparation for polysomnographic testing

    If the nasion-inion distance is 34 cm, how far above the nasion should Fpz be marked?

    1. 6.8 cm
    2. 17 cm
    3. 10.2 cm
    4. 3.4 cm Correct answer.

    Explanation

    Fpz lies at 10% of the nasion-inion distance above the nasion. Ten percent of 34 cm is 3.4 cm. The 50% point (17 cm) would mark Cz.

  22. Question 22Patient and equipment preparation for polysomnographic testing

    Despite cleaning, an electrode reads 15 kΩ. What is the best next step?

    1. Begin recording and adjust the amplifier gain
    2. Remove the electrode and leave the channel open
    3. Tape the electrode down more tightly
    4. Re-prep and refill the cup with gel Correct answer.

    Explanation

    An impedance of 15 kΩ indicates poor electrical contact. Re-preparing the skin and refilling the electrode cup with fresh gel addresses the underlying cause. Adjusting gain or tape does not correct a high-resistance connection.

  23. Question 23Patient and equipment preparation for polysomnographic testing

    When preparing a young child for polysomnography, which approach is most appropriate?

    1. Use child-sized sensors and let a caregiver stay Correct answer.
    2. Perform all preparation while the child is asleep without consent
    3. Use only adult-sized sensors to simplify setup
    4. Skip the EEG electrodes to reduce preparation time

    Explanation

    Pediatric patients require appropriately sized sensors for reliable contact and comfort. Allowing a caregiver to remain nearby reduces distress and improves cooperation during setup.

  24. Question 24Patient and equipment preparation for polysomnographic testing

    Why should all medications, including over-the-counter products, be documented before a sleep study?

    1. To determine the room temperature
    2. To calculate the CPAP pressure
    3. To decide which sensors to skip
    4. Drugs can alter sleep and affect scoring Correct answer.

    Explanation

    Many medications, including sedatives, stimulants, and antidepressants, change sleep architecture and can affect staging and event interpretation. A complete medication list lets the interpreter account for these effects.

  25. Question 25Patient and equipment preparation for polysomnographic testing

    An EEG channel shows sharp, regular artifact matching the heart rate. Which action is most appropriate?

    1. Increase the high-frequency filter to remove all EEG activity
    2. Remove the ECG electrodes to eliminate the artifact
    3. Re-prep high-impedance sites and check the reference Correct answer.
    4. Ask the patient to hold their breath

    Explanation

    Pulse artifact usually reflects a poor or misplaced reference electrode or high-impedance site picking up cardiac activity. Re-preparing those sites and verifying the reference typically resolves the artifact. Filtering or removing ECG monitoring would compromise the study.

  26. Question 26Patient and equipment preparation for polysomnographic testing

    What is the primary purpose of gently abrading the skin at an EEG electrode site before applying the electrode?

    1. To increase the amplitude of the recorded EEG signal
    2. To sterilize the skin surface before electrode placement
    3. To lower impedance by removing skin oils and debris Correct answer.
    4. To make the electrode adhesive dry more quickly

    Explanation

    Light abrasion removes the outer dead skin layer and oils, lowering electrical resistance between the electrode and skin so a stable signal can be recorded. It is not intended to sterilize the skin or change the brain signal itself.

  27. Question 27Patient and equipment preparation for polysomnographic testing

    Where are the standard leg EMG electrodes placed?

    1. Over the gastrocnemius muscle belly
    2. Over the quadriceps tendon just above the knee
    3. Over the Achilles tendon at the ankle
    4. Over the anterior tibialis, 2 to 3 cm apart Correct answer.

    Explanation

    Leg EMG for sleep staging is recorded from the anterior tibialis, with two electrodes placed along the muscle belly separated by a few centimeters. This placement captures the tibialis anterior contractions typical of periodic limb movements.

  28. Question 28Patient and equipment preparation for polysomnographic testing

    Which hair preparation instruction is appropriate before an overnight sleep study?

    1. Apply a light conditioner to reduce tangling
    2. Use hair oil to protect the scalp during the study
    3. Leave the hair unwashed to preserve its natural protective oils
    4. Wash the hair and avoid conditioner, oils, and styling products Correct answer.

    Explanation

    Clean, product-free hair allows electrodes to adhere and keeps impedance low. Conditioners, oils, and styling products leave a film that interferes with adhesion and electrical contact.

  29. Question 29Patient and equipment preparation for polysomnographic testing

    Before applying adhesive electrodes or tape, the technologist should ask the patient about:

    1. Usual sleep position and bedtime
    2. Dietary restrictions and food allergies
    3. History of snoring and daytime sleepiness
    4. Allergies to adhesives or latex Correct answer.

    Explanation

    Adhesive and latex allergies can cause skin reactions and must be identified before electrode application so alternative materials can be used. Sleep position and snoring are relevant to the study but do not guide immediate skin safety.

  30. Question 30Patient and equipment preparation for polysomnographic testing

    A male patient has dense chest hair at the ECG electrode sites. What should the technologist do?

    1. Clip the hair at the electrode sites Correct answer.
    2. Move the ECG electrodes to the abdomen to avoid the hair
    3. Apply the electrodes directly over the chest hair
    4. Apply extra conductive paste to the hair at the sites

    Explanation

    Hair prevents good skin contact and raises impedance; clipping the hair at the site allows reliable electrode adhesion. Shaving is not required and may cause skin irritation. Moving ECG electrodes to the abdomen alters the standard lead placement.

  31. Question 31Patient and equipment preparation for polysomnographic testing

    What instruction about alcohol should be given before an overnight sleep study?

    1. Avoid alcohol on the day of the study Correct answer.
    2. Only beer is permitted before the study
    3. Alcohol is permitted until bedtime
    4. Drink a small amount to help with sleep onset

    Explanation

    Alcohol can worsen sleep-disordered breathing and alter sleep architecture, so patients are generally asked to avoid it on the day of the study. It is not used as a sleep aid in the laboratory.

  32. Question 32Patient and equipment preparation for polysomnographic testing

    If an EEG electrode becomes loose after application, what is the best action?

    1. Tape over the loose electrode without removing it
    2. Increase the amplifier gain for that channel
    3. Re-prepare the site and reapply the electrode Correct answer.
    4. Record the channel as artifact for the entire night

    Explanation

    A loose electrode produces unstable impedance and artifact; the site must be cleaned and prepared again before reapplication. Taping over it or changing gain does not restore a reliable connection.

  33. Question 33Patient and equipment preparation for polysomnographic testing

    What is the main purpose of the 10-20 measurement system?

    1. To measure sleep stages automatically
    2. To determine the best pulse oximeter site
    3. To standardize EEG electrode placement across patients Correct answer.
    4. To calculate the required CPAP pressure for the patient

    Explanation

    The 10-20 system uses proportional skull measurements to place electrodes in reproducible locations, allowing recordings to be compared across patients and laboratories. It does not determine CPAP pressure or sleep stage.

  34. Question 34Patient and equipment preparation for polysomnographic testing

    Which set of derivations is included in the standard AASM EEG montage for polysomnography?

    1. A1-A2, Cz-Oz, and F7-F8
    2. T3-T4, P3-P4, and Fz-Cz
    3. F4-M1, C4-M1, and O2-M1 Correct answer.
    4. Fp1-Fp2, C3-C4, and O1-O2

    Explanation

    The recommended EEG derivations for sleep staging are frontal, central, and occipital channels referred to the mastoid: F4-M1, C4-M1, and O2-M1. The other sets are not the standard AASM sleep montage.

  35. Question 35Patient and equipment preparation for polysomnographic testing

    Which placement describes the standard EOG derivations used in polysomnography?

    1. Both EOG electrodes placed above the eyebrows and referred to each other
    2. Left above the left eyebrow; right below the right eye; referred to Cz
    3. Left below the left canthus; right above the right canthus; opposite mastoids Correct answer.
    4. Both EOG electrodes placed at the outer canthi and referred to the chin

    Explanation

    Standard EOG uses electrodes placed below the left outer canthus and above the right outer canthus, referred to the opposite mastoid, so eye movements appear out of phase. The other placements do not follow the recommended derivation.

  36. Question 36Patient and equipment preparation for polysomnographic testing

    What is the purpose of applying a 50 µV calibration signal at the start of a polysomnogram?

    1. To measure the patient's pain threshold
    2. To set the room temperature for sleep
    3. To verify channel gain and sensitivity Correct answer.
    4. To test the patient's hearing threshold before sleep

    Explanation

    A known calibration voltage allows the technologist to confirm that amplifiers and display settings produce the expected deflection for each channel. It does not assess sensory function or environmental conditions.

  37. Question 37Patient and equipment preparation for polysomnographic testing

    A patient arrives with long acrylic fingernails. What is the best action for pulse oximetry?

    1. Remove the acrylic nail with solvent before applying the probe
    2. Increase the alarm limits so false alarms are less likely
    3. Place the probe on a finger with the longest nail
    4. Use an alternate finger or site not covered by acrylic Correct answer.

    Explanation

    Acrylic nails can block light transmission and reduce oximeter accuracy; selecting a different finger or an alternate site improves signal quality. Removing the nail with solvent is not the technologist's role in routine setup.

  38. Question 38Patient and equipment preparation for polysomnographic testing

    Before a CPAP titration study, how should the technologist verify the device?

    1. Ask the patient to breathe into the mask
    2. Set the pressure to the maximum value and observe
    3. Disconnect the humidifier and run the device
    4. Check the delivered pressure with a manometer Correct answer.

    Explanation

    A manometer confirms that the CPAP unit delivers the prescribed pressure before the study begins. Patient breathing or maximum pressure settings do not verify calibration.

  39. Question 39Patient and equipment preparation for polysomnographic testing

    How should the pulse oximeter cable be secured to the patient?

    1. Coil it tightly around the finger to keep it short
    2. Wrap it around the patient's neck
    3. Tape it tightly directly to the skin
    4. Leave a slack loop and use strain relief Correct answer.

    Explanation

    A slack loop prevents traction on the probe and reduces the risk of skin injury or signal loss if the patient moves. Tight taping or coiling can impair circulation and damage the probe.

  40. Question 40Patient and equipment preparation for polysomnographic testing

    How should reusable respiratory sensors be processed between patients?

    1. Rinse with water only
    2. Clean and disinfect per manufacturer instructions Correct answer.
    3. Store them without cleaning if visibly dry
    4. Sterilize them in an autoclave regardless of material

    Explanation

    Reusable sensors must be cleaned and disinfected following the manufacturer's validated method to prevent cross-contamination and avoid damage. Autoclaving may destroy heat-sensitive components.

  41. Question 41Patient and equipment preparation for polysomnographic testing

    A patient reports a latex allergy. Which action is most appropriate during setup?

    1. Apply a barrier cream and use the usual supplies
    2. Use standard latex gloves but avoid touching the patient
    3. Use latex-free gloves and latex-free electrodes and tape Correct answer.
    4. Ask the patient to bring their own electrodes

    Explanation

    Latex-free supplies prevent allergic reactions in sensitized patients. Barrier cream or avoiding contact does not reliably prevent exposure.

  42. Question 42Patient and equipment preparation for polysomnographic testing

    Chin EMG electrodes are placed over which muscle?

    1. The frontalis muscle
    2. The trapezius muscle
    3. The mentalis or submental muscle group Correct answer.
    4. The masseter muscle

    Explanation

    Chin EMG for sleep staging is recorded from the mentalis/submental muscles, which show characteristic tone changes across sleep. The masseter, frontalis, and trapezius are not the standard chin EMG sites.

  43. Question 43Patient and equipment preparation for polysomnographic testing

    Where are the mastoid reference electrodes placed?

    1. At the tip of the nose
    2. Over the mastoid process behind each ear Correct answer.
    3. On the forehead at the midline Fpz position
    4. On the chin at the mentalis

    Explanation

    M1 and M2 are placed over the left and right mastoid processes behind the ears and serve as references for EEG and EOG derivations. Forehead, nose, and chin sites are used for other sensors.

  44. Question 44Patient and equipment preparation for polysomnographic testing

    How should the technologist mark EEG electrode sites before application?

    1. Measure and mark each site with a soft pencil Correct answer.
    2. Use the patient's hair part as the only guide
    3. Mark only the occipital sites before application
    4. Estimate the positions without measuring the skull

    Explanation

    Accurate 10-20 placement requires measurement from landmarks such as nasion and inion, with sites marked before skin preparation. Estimating or marking only one region leads to inconsistent derivations.

  45. Question 45Patient and equipment preparation for polysomnographic testing

    Why is the nasion-inion distance measured during EEG setup?

    1. To determine the pulse oximeter site
    2. To assess the patient's hearing level
    3. To locate 10-20 electrode positions proportionally Correct answer.
    4. To calculate the required CPAP pressure for titration

    Explanation

    The nasion-inion distance provides the midline reference needed to calculate proportional electrode positions. It is not used for CPAP pressure or oximetry.

  46. Question 46Patient and equipment preparation for polysomnographic testing

    Which practice best reduces the risk of electrical shock to a patient during polysomnography?

    1. Ground equipment properly and use isolated patient leads Correct answer.
    2. Attach all electrodes before turning on the equipment
    3. Use extension cords without ground connections to simplify setup
    4. Increase the amplifier gain to the maximum

    Explanation

    Proper grounding and isolated patient-connected leads limit current that could reach the patient. Maximum gain, ungrounded extension cords, and improper power-up sequence increase risk.

  47. Question 47Patient and equipment preparation for polysomnographic testing

    A pulse oximeter shows a poor waveform and a reading of 88%. What is the first action?

    1. Increase the oxygen flow immediately
    2. Document the value as hypoxemia and notify the physician
    3. Replace the oximeter with a new device
    4. Check probe placement and peripheral perfusion Correct answer.

    Explanation

    A poor waveform suggests the reading is unreliable, so the technologist should first verify probe position and perfusion before acting on the value. Documenting or treating an artifact as hypoxemia can lead to inappropriate care.

  48. Question 48Patient and equipment preparation for polysomnographic testing

    A patient with a known adhesive allergy requires EEG electrodes for an overnight study. Which approach is best?

    1. Skip EEG recording for the night
    2. Apply collodion to create a protective barrier over the skin
    3. Use hypoallergenic electrodes and an alternative adhesive dressing Correct answer.
    4. Use the standard adhesive and remove electrodes early

    Explanation

    Avoiding the allergen is the priority; hypoallergenic electrodes and alternative dressings allow recording while reducing skin reaction. Standard adhesive or collodion can trigger the allergy.

  49. Question 49Patient and equipment preparation for polysomnographic testing

    A patient with a thick beard has high chin EMG impedance after standard preparation. What is the best next step?

    1. Move the electrodes to the forehead
    2. Clip the hair, cleanse and abrade the site, then reapply Correct answer.
    3. Increase the EMG gain to compensate
    4. Accept the impedance because chin EMG is not important

    Explanation

    Facial hair interferes with skin contact; clipping and re-preparing the site improves impedance before considering other changes. Increasing gain or moving to the forehead does not correct the electrode-skin interface.

  50. Question 50Patient and equipment preparation for polysomnographic testing

    What is the correct sequence for preparing an EEG electrode site?

    1. Abrade, apply the electrode, then cleanse the site
    2. Wipe dry, apply the electrode, then abrade the site
    3. Apply paste, cleanse, then abrade the site
    4. Cleanse, abrade, wipe dry, then apply the electrode Correct answer.

    Explanation

    The site should be cleaned, lightly abraded, and dried before electrode application so the adhesive and conductive medium bond to a stable surface. Applying the electrode before preparation traps oils and debris.

  51. Question 51Polysomnographic data acquisition and monitoring

    Which set of derivations makes up the primary EEG montage recommended by the AASM for scoring sleep?

    1. Fz-Cz, Cz-Pz, Pz-Oz
    2. T3-M2, C3-M1, T4-M1
    3. F3-M2, C3-M2, O1-M2
    4. F4-M1, C4-M1, O2-M1 Correct answer.

    Explanation

    The recommended sleep montage uses right-sided frontal, central, and occipital derivations referred to the left mastoid (M1), with left-sided derivations to M2 kept as backups. Central channels are needed to see spindles and K-complexes, and occipital channels to see alpha rhythm.

  52. Question 52Polysomnographic data acquisition and monitoring

    In the standard AASM EOG montage, where is electrode E1 placed?

    1. 1 cm above the left outer canthus
    2. 1 cm below the left outer canthus Correct answer.
    3. 1 cm below the right outer canthus
    4. over the left inner canthus

    Explanation

    E1 sits 1 cm below the left outer canthus and E2 sits 1 cm above the right outer canthus, each referred to the opposite mastoid. This diagonal arrangement places the two electrodes on opposite sides of the eyes so that conjugate eye movements produce out-of-phase deflections.

  53. Question 53Polysomnographic data acquisition and monitoring

    What is the maximum electrode impedance generally considered acceptable for a sleep recording according to AASM guidelines?

    1. ≤ 1 kΩ
    2. ≤ 5 kΩ Correct answer.
    3. ≤ 50 kΩ
    4. ≤ 20 kΩ

    Explanation

    AASM guidelines specify that electrode impedance should be 5 kΩ or less before recording begins. Low impedance reduces 60 Hz interference and improves the common mode rejection of the amplifier.

  54. Question 54Polysomnographic data acquisition and monitoring

    Which filter settings are standard for the chin EMG channel?

    1. 1 Hz and 15 Hz
    2. 0.1 Hz and 70 Hz
    3. 10 Hz and 100 Hz Correct answer.
    4. 0.3 Hz and 35 Hz

    Explanation

    Chin EMG uses a low-frequency filter of 10 Hz and a high-frequency filter of 100 Hz. The relatively high low-frequency setting removes slow baseline sway and EEG/EOG bleed-through while preserving muscle activity.

  55. Question 55Polysomnographic data acquisition and monitoring

    Which filter settings are standard for the EEG channels during a sleep study?

    1. 10 Hz to 100 Hz
    2. 1 Hz to 70 Hz
    3. 0.1 Hz to 15 Hz
    4. 0.3 Hz to 35 Hz Correct answer.

    Explanation

    EEG is recorded with a low-frequency filter of 0.3 Hz and a high-frequency filter of 35 Hz. This band passes delta through beta activity while limiting slow baseline sway and high-frequency muscle artifact.

  56. Question 56Polysomnographic data acquisition and monitoring

    How is snoring typically detected during a polysomnogram?

    1. With a piezoelectric belt around the chest
    2. With a nasal pressure cannula
    3. With a microphone or vibration sensor at the neck Correct answer.
    4. With a thermistor at the nares

    Explanation

    Snoring is recorded with a microphone or vibration sensor taped at the neck over the larynx or trachea. The signal is used to document snoring and to help identify upper airway resistance events.

  57. Question 57Polysomnographic data acquisition and monitoring

    Where is the body position sensor placed for a sleep study?

    1. Worn on the patient's chest or abdomen Correct answer.
    2. Clipped to the headboard of the bed
    3. Attached to the CPAP tubing
    4. Taped to the mattress beneath the shoulders

    Explanation

    The position sensor is worn on the patient's body, usually at the chest or abdomen, so that it moves with the patient. It is calibrated at the start of the study so the supine, prone, left, and right positions are correctly identified.

  58. Question 58Polysomnographic data acquisition and monitoring

    Where are the ECG electrodes placed for a routine sleep study?

    1. On the forehead and mastoid
    2. On the lateral calves
    3. On the upper chest below the clavicles Correct answer.
    4. On the wrists and ankles

    Explanation

    A single modified lead II is obtained with one electrode below the right clavicle and one on the left lower chest or below the left clavicle. This configuration gives a clear QRS complex for rhythm monitoring without interfering with respiration.

  59. Question 59Polysomnographic data acquisition and monitoring

    EEG activity of interest extends up to 35 Hz. What is the minimum sampling rate needed to digitize it without aliasing?

    1. 35 Hz
    2. 17.5 Hz
    3. 70 Hz Correct answer.
    4. 350 Hz

    Explanation

    The Nyquist theorem requires a sampling rate of at least twice the highest frequency of interest. For a 35 Hz upper limit, the minimum rate is therefore 70 Hz, and clinical systems sample well above this for safety.

  60. Question 60Polysomnographic data acquisition and monitoring

    A slow, rolling baseline sway appears in several EEG channels of a patient who is warm and perspiring. Which measure most directly reduces this artifact?

    1. Reducing the sensitivity to 1 µV/mm
    2. The low-frequency filter, typically set at 0.3 Hz Correct answer.
    3. A 60 Hz notch filter
    4. A high-frequency filter set at 70 Hz

    Explanation

    Sweat produces a very slow potential change, so it is attenuated by the low-frequency (high-pass) filter rather than by high-frequency or notch filters. Cooling the patient and drying the skin also help.

  61. Question 61Polysomnographic data acquisition and monitoring

    A 60 Hz artifact appears in one EEG channel while the remaining channels are clean. What is the most likely cause?

    1. The patient is sweating beneath the electrode
    2. The high-frequency filter is set too low
    3. The oximeter averaging time is set too short
    4. The impedance at that one electrode is high Correct answer.

    Explanation

    Line interference appears when the two amplifier inputs pick up unequal amounts of 60 Hz noise, most often because one electrode has high impedance or a poor connection. Re-preparing or re-securing that electrode usually clears the artifact.

  62. Question 62Polysomnographic data acquisition and monitoring

    Rhythmic sharp transients are seen in the EEG channels. Which observation best confirms that they are ECG artifact?

    1. They occur only during inspiration and are absent in expiration
    2. They disappear when the patient is asked to open the eyes widely
    3. They coincide with the QRS complexes in the ECG channel Correct answer.
    4. They change in frequency with the chin EMG tone

    Explanation

    ECG artifact appears when the cardiac signal reaches the EEG electrodes, so each transient lines up in time with a QRS complex on the ECG channel. Moving the reference or repositioning the head leads often reduces it.

  63. Question 63Polysomnographic data acquisition and monitoring

    Respiratory inductance plethysmography belts estimate breathing by measuring:

    1. temperature change in airflow at the nares
    2. pressure change at the nasal opening
    3. chest and abdominal volume change Correct answer.
    4. oxygen saturation of arterial blood

    Explanation

    Each RIP belt contains a wire whose inductance changes as the belt stretches, so the signal reflects the cross-sectional area of the chest or abdomen. Comparing the two belts helps distinguish obstructive from central events.

  64. Question 64Polysomnographic data acquisition and monitoring

    Compared with an oronasal thermistor, why is a nasal pressure transducer preferred for detecting hypopneas?

    1. It is placed on the chest to detect respiratory effort
    2. It is unaffected by mouth breathing
    3. It measures temperature change more precisely
    4. It is more sensitive to small changes in airflow Correct answer.

    Explanation

    The nasal pressure transducer detects the pressure changes of airflow and responds to much smaller flows than a thermistor, which is why it is the recommended sensor for hypopneas. Thermistors remain useful for detecting complete cessation of airflow in apneas.

  65. Question 65Polysomnographic data acquisition and monitoring

    The pulse oximeter tracing shows frequent dropouts and an erratic plethysmographic waveform. Which is the most likely cause?

    1. Poor peripheral perfusion or motion at the probe site Correct answer.
    2. An excessively long averaging time
    3. A low-frequency filter set too high
    4. A sampling rate that is too low for the EEG

    Explanation

    An erratic plethysmographic waveform with dropouts usually reflects a poor optical signal, from cold digits, poor perfusion, motion, nail polish, or probe malalignment. Repositioning the probe on another digit and warming the hand typically restores a stable signal.

  66. Question 66Polysomnographic data acquisition and monitoring

    Which is an example of a biologic calibration performed at the start of a sleep study?

    1. Documenting room temperature and humidity at lights out
    2. Recording the amplifier's internal reference voltage
    3. Having the patient move the eyes and clench the jaw Correct answer.
    4. Applying a square-wave signal to verify amplifier gain

    Explanation

    Biologic calibration uses signals generated by the patient, such as eye movements, jaw clenching, snoring, and breathing, to confirm that each channel responds appropriately. The technologist labels these maneuvers so the tracings can be verified before recording begins.

  67. Question 67Polysomnographic data acquisition and monitoring

    Where are the submental EMG electrodes placed?

    1. Over the masseter muscle at the angle of the jaw
    2. On the forehead just above the eyebrows
    3. Below the mandible near the midline Correct answer.
    4. On the anterior neck directly over the carotid artery

    Explanation

    Submental electrodes sit just below the mandible close to the midline, over the submentalis muscle, and away from the carotid pulse. Two active electrodes are placed on either side of midline with a reference, so that chin tone reflects genioglossus and submentalis activity.

  68. Question 68Polysomnographic data acquisition and monitoring

    What is the purpose of the square-wave calibration signal applied before recording?

    1. To test the snore microphone response
    2. To measure the patient's skin impedance
    3. To verify amplifier gain and channel alignment Correct answer.
    4. To determine the pulse oximeter averaging time

    Explanation

    The square-wave calibration signal is applied to all channels so the technologist can confirm that each amplifier has the correct gain and that the pens or traces align at a known deflection. It is a machine calibration and does not involve the patient.

  69. Question 69Polysomnographic data acquisition and monitoring

    An oronasal thermistor detects airflow by sensing:

    1. sound energy generated in the upper airway
    2. pressure oscillations generated at the nasal opening during airflow
    3. temperature change between inspiration and expiration Correct answer.
    4. movement of the chest wall during respiration

    Explanation

    A thermistor changes resistance with temperature, so it records the difference between the cooler inspired air and the warmer expired air. It is a reliable apnea sensor but is less sensitive than a pressure transducer for partial airflow reduction.

  70. Question 70Polysomnographic data acquisition and monitoring

    An amplifier's common mode rejection ratio describes its ability to:

    1. remove low-frequency baseline sway from the tracing
    2. convert analog signals into digital form
    3. suppress signals common to both inputs Correct answer.
    4. amplify signals that appear equally at both inputs

    Explanation

    A differential amplifier amplifies the difference between its two inputs and rejects whatever is identical at both. The common mode rejection ratio expresses how well that shared signal, such as 60 Hz pickup, is suppressed.

  71. Question 71Polysomnographic data acquisition and monitoring

    In a standard EEG derivation, the active electrode (input 1) becomes more negative than the reference (input 2). By convention, the trace deflects:

    1. downward
    2. to the baseline
    3. in alternating directions
    4. upward Correct answer.

    Explanation

    EEG convention displays negativity at input 1 relative to input 2 as an upward deflection. Knowing this rule lets the technologist identify the source of a signal, such as eye movements or a focal transient, from its polarity.

  72. Question 72Polysomnographic data acquisition and monitoring

    Changing the EEG low-frequency filter from 0.1 Hz to 0.3 Hz will:

    1. increase the high-frequency cutoff and reduce EMG artifact
    2. decrease the time constant and attenuate slow activity Correct answer.
    3. have no effect on the appearance of the tracing
    4. increase the time constant and let more slow activity through

    Explanation

    The time constant is inversely proportional to the low-frequency cutoff, so raising the setting from 0.1 Hz to 0.3 Hz shortens the time constant and removes more slow baseline activity. This makes slow waves look flatter and can alter the appearance of delta activity.

  73. Question 73Polysomnographic data acquisition and monitoring

    End-tidal CO2 monitoring during a sleep study is most useful for:

    1. confirming the severity of obstructive sleep apnea during the night
    2. detecting hypoventilation in children or with opioids Correct answer.
    3. measuring the loop gain of the ventilatory control system
    4. quantifying the number of leg movements per hour

    Explanation

    Capnography identifies hypoventilation by showing a rise in end-tidal CO2 or an inadequate waveform, which is particularly important in children and in patients taking opioids or with neuromuscular disease. It supplements, rather than replaces, airflow and effort monitoring.

  74. Question 74Polysomnographic data acquisition and monitoring

    Why is a low-pass anti-aliasing filter applied before the analog-to-digital converter?

    1. To block frequencies above half the sampling rate Correct answer.
    2. To equalize electrode impedance across all the channels
    3. To remove 60 Hz electrical interference from the tracing
    4. To increase the amplitude of low-frequency components in the signal

    Explanation

    Frequencies higher than half the sampling rate would fold back into the recording as false slow waves, a phenomenon called aliasing. The anti-aliasing filter removes those frequencies before digitization so the sampled signal is faithful.

  75. Question 75Polysomnographic data acquisition and monitoring

    An abrupt, near-vertical deflection with a sudden baseline shift appears in one EEG channel and then the tracing partly recovers. This most likely represents:

    1. a sweat artifact
    2. a 60 Hz interference
    3. an ECG artifact
    4. an electrode pop Correct answer.

    Explanation

    An electrode pop is caused by a sudden change in impedance, usually from electrode movement, drying paste, or a loose connection. It appears as an abrupt step or spike with a baseline shift and is corrected by re-securing or replacing the electrode.

  76. Question 76Polysomnographic data acquisition and monitoring

    In the 10-20 electrode placement system, which electrode is located at the midline vertex of the head?

    1. Oz
    2. Pz
    3. Cz Correct answer.
    4. Fz

    Explanation

    Cz is the midline central electrode and sits at the vertex where the sagittal and coronal planes intersect. The other midline electrodes lie anterior or posterior to it.

  77. Question 77Polysomnographic data acquisition and monitoring

    During impedance testing, which value is the maximum generally acceptable for a scalp EEG electrode in a sleep study?

    1. 1 kΩ
    2. 50 kΩ
    3. 10 kΩ
    4. 5 kΩ Correct answer.

    Explanation

    Guidelines recommend keeping EEG, EOG, and EMG electrode impedances at or below 5 kΩ. Higher impedances increase susceptibility to artifact and should prompt reapplication.

  78. Question 78Polysomnographic data acquisition and monitoring

    Which filter settings are standard for the chin EMG channel during a polysomnogram?

    1. 0.1 Hz low-frequency and 15 Hz high-frequency
    2. 1 Hz low-frequency and 70 Hz high-frequency
    3. 10 Hz low-frequency and 100 Hz high-frequency Correct answer.
    4. 0.3 Hz low-frequency and 35 Hz high-frequency

    Explanation

    Chin EMG is recorded with a low-frequency filter near 10 Hz and a high-frequency filter near 100 Hz. This preserves muscle activity while limiting slow drift and high-frequency noise.

  79. Question 79Polysomnographic data acquisition and monitoring

    The EOG channels in a polysomnogram are designed primarily to record which signal?

    1. Eye movements Correct answer.
    2. Cardiac rhythm
    3. Muscle tone
    4. Airflow

    Explanation

    EOG electrodes placed near the eyes record the corneo-retinal potential, which changes with eye position. They also pick up some frontal EEG activity.

  80. Question 80Polysomnographic data acquisition and monitoring

    In a standard referential EEG montage for sleep, left-sided EEG electrodes are usually referenced to which electrode?

    1. Left mastoid (M1)
    2. Ground
    3. Right mastoid (M2) Correct answer.
    4. Cz

    Explanation

    Left-sided derivations are referenced to the contralateral right mastoid (M2), while right-sided derivations are referenced to the left mastoid (M1). This keeps the reference relatively inactive.

  81. Question 81Polysomnographic data acquisition and monitoring

    Which epoch length is standard for displaying and scoring a polysomnogram?

    1. 10 seconds
    2. 20 seconds
    3. 60 seconds
    4. 30 seconds Correct answer.

    Explanation

    Sleep is staged in 30-second epochs, which is the standard display and scoring interval in polysomnography.

  82. Question 82Polysomnographic data acquisition and monitoring

    Which site is preferred for placing a pulse oximeter probe during a routine sleep study?

    1. Finger Correct answer.
    2. Forehead
    3. Toe
    4. Earlobe

    Explanation

    The finger is the standard site because it provides a strong pulsatile signal and is convenient for overnight recording. Earlobe and forehead are alternatives when finger perfusion is poor.

  83. Question 83Polysomnographic data acquisition and monitoring

    What is the main purpose of the ground electrode in a polysomnographic recording?

    1. To measure respiratory effort
    2. To record muscle tone
    3. To provide a common reference that reduces electrical interference Correct answer.
    4. To detect body position

    Explanation

    The ground electrode does not enter a differential derivation; it provides a common zero reference that helps reject common-mode interference such as 60 Hz noise.

  84. Question 84Polysomnographic data acquisition and monitoring

    The 10-20 system of electrode placement is based on measurements taken from which landmarks?

    1. Vertex, forehead, and neck
    2. Mastoids and occiput only
    3. Nasion, inion, and preauricular points Correct answer.
    4. Eyes, ears, and chin

    Explanation

    The 10-20 system uses the nasion, inion, and left and right preauricular points to define proportional distances across the skull. Electrodes are placed at 10% or 20% intervals between these landmarks.

  85. Question 85Polysomnographic data acquisition and monitoring

    An EEG electrode shows an impedance of 12 kΩ while the others are below 5 kΩ. What is the most appropriate action?

    1. Continue recording because the value is acceptable
    2. Prepare the skin and reapply the electrode Correct answer.
    3. Increase the amplifier gain
    4. Change the high-frequency filter

    Explanation

    Impedances above 5 kΩ are more susceptible to artifact and should be corrected. Cleaning and prepping the skin and reapplying the electrode with fresh conductive paste usually lowers impedance.

  86. Question 86Polysomnographic data acquisition and monitoring

    The standard EOG placement, with one electrode below and one above the horizontal plane of the eyes, is designed to detect which eye movements?

    1. Only vertical movements
    2. Only blinks
    3. Both horizontal and vertical movements Correct answer.
    4. Only horizontal movements

    Explanation

    The asymmetric placement around the eyes allows the EOG to capture both horizontal and vertical eye movements, including slow rolling eye movements and blinks.

  87. Question 87Polysomnographic data acquisition and monitoring

    A 60 Hz notch filter is applied to an EEG channel. What is its intended effect?

    1. Remove all frequencies below 60 Hz
    2. Attenuate a narrow band of electrical interference at 60 Hz Correct answer.
    3. Increase the amplitude of 60 Hz activity
    4. Remove all frequencies above 60 Hz

    Explanation

    A notch filter sharply attenuates a narrow frequency band, typically 50 or 60 Hz, to suppress line-noise interference without broadly filtering the EEG.

  88. Question 88Polysomnographic data acquisition and monitoring

    An EMG signal contains frequencies up to 100 Hz. What is the minimum sampling rate needed to digitize it without aliasing?

    1. 100 Hz
    2. 400 Hz
    3. 200 Hz Correct answer.
    4. 50 Hz

    Explanation

    The Nyquist theorem requires a sampling rate at least twice the highest frequency present. A signal containing 100 Hz therefore needs at least 200 Hz.

  89. Question 89Polysomnographic data acquisition and monitoring

    A 12-bit analog-to-digital converter can represent a signal using how many discrete levels?

    1. 4096 Correct answer.
    2. 1024
    3. 65536
    4. 256

    Explanation

    Bit depth determines the number of levels as 2 raised to the number of bits. For 12 bits, 2^12 equals 4096 levels.

  90. Question 90Polysomnographic data acquisition and monitoring

    A slow, rhythmic wave appears in a single EEG channel at exactly the same rate as the patient's heartbeats and does not appear in neighboring channels. What is the most likely explanation?

    1. 60 Hz interference
    2. Sweat artifact
    3. Muscle artifact
    4. Pulse artifact Correct answer.

    Explanation

    A pulse artifact is a slow wave time-locked to the heartbeat that typically appears in one electrode placed over a pulsating vessel. It usually resolves when the electrode is moved.

  91. Question 91Polysomnographic data acquisition and monitoring

    Which statement best describes a bipolar EEG montage?

    1. Each channel displays the average of all electrodes
    2. Each channel displays the difference between two adjacent scalp electrodes Correct answer.
    3. Each channel displays one electrode against a common reference
    4. Each channel displays the ground potential

    Explanation

    In a bipolar montage, each channel records the voltage difference between two scalp electrodes, usually adjacent ones in a chain. This arrangement helps localize focal activity through phase reversals.

  92. Question 92Polysomnographic data acquisition and monitoring

    An EEG signal of 50 µV is displayed at a sensitivity of 7 µV/mm. What deflection height will it produce?

    1. About 50 mm
    2. About 7.1 mm Correct answer.
    3. About 3.5 mm
    4. About 14 mm

    Explanation

    Deflection height equals amplitude divided by sensitivity. Dividing 50 µV by 7 µV/mm gives approximately 7.1 mm.

  93. Question 93Polysomnographic data acquisition and monitoring

    What is the effect of setting the EEG high-frequency filter to 35 Hz?

    1. Frequencies above 35 Hz are attenuated Correct answer.
    2. A narrow band at 35 Hz is removed
    3. Frequencies below 35 Hz are attenuated
    4. All frequencies are amplified equally

    Explanation

    The high-frequency filter, or low-pass filter, attenuates activity above its cutoff. A 35 Hz setting reduces faster activity while preserving the EEG range of interest.

  94. Question 94Polysomnographic data acquisition and monitoring

    Which signal is used to estimate respiratory effort by measuring pressure changes in the lower esophagus?

    1. Pulse oximetry
    2. Snoring microphone
    3. Esophageal pressure Correct answer.
    4. End-tidal CO2

    Explanation

    An esophageal pressure catheter measures intrathoracic pressure swings and provides a sensitive index of respiratory effort. It is useful when effort must be distinguished from airflow limitation.

  95. Question 95Polysomnographic data acquisition and monitoring

    Why are silver/silver chloride (Ag/AgCl) electrodes commonly used for sleep EEG recordings?

    1. They have a stable, low half-cell potential and low drift Correct answer.
    2. They are radiopaque
    3. They amplify the signal internally
    4. They require no conductive paste

    Explanation

    Ag/AgCl electrodes provide a stable electrode-electrolyte interface, which minimizes baseline drift and offset potentials. This stability improves recording quality over long periods.

  96. Question 96Polysomnographic data acquisition and monitoring

    An EEG low-frequency filter is set to 0.3 Hz. What is the approximate time constant?

    1. 0.53 seconds Correct answer.
    2. 0.1 seconds
    3. 1.0 second
    4. 3.3 seconds

    Explanation

    The time constant is calculated as 1 divided by 2πf. For 0.3 Hz, 1/(2π × 0.3) is approximately 0.53 seconds.

  97. Question 97Polysomnographic data acquisition and monitoring

    A 40 Hz signal is sampled at 60 Hz. At what frequency will it appear in the digitized record?

    1. 10 Hz
    2. 40 Hz
    3. 20 Hz Correct answer.
    4. 100 Hz

    Explanation

    The Nyquist frequency for a 60 Hz sampling rate is 30 Hz. Because 40 Hz exceeds it, the signal aliases to the difference between the sampling rate and the signal frequency, or 20 Hz.

  98. Question 98Polysomnographic data acquisition and monitoring

    A differential amplifier has a gain of 1000. Input 1 is +50 µV and input 2 is −20 µV. What is the output voltage?

    1. 100 mV
    2. 50 mV
    3. 30 mV
    4. 70 mV Correct answer.

    Explanation

    The differential input is (+50 µV) minus (−20 µV), which equals 70 µV. Multiplying by the gain of 1000 gives 70,000 µV, or 70 mV.

  99. Question 99Polysomnographic data acquisition and monitoring

    In a bipolar montage, a focal negative discharge at electrode C4 will produce which pattern in the channels that include C4?

    1. A phase reversal between the channel ending at C4 and the channel beginning at C4 Correct answer.
    2. Attenuation of all channels equally
    3. Identical in-phase waves in all channels
    4. A 60 Hz artifact in the C4 channels

    Explanation

    In a bipolar chain, a focal negativity at a shared electrode causes the two channels that share it to deflect in opposite directions. This phase reversal helps localize the focus.

  100. Question 100Polysomnographic data acquisition and monitoring

    The distance from nasion to inion is 36 cm. Using the 10-20 system, how far from the nasion is Cz located?

    1. 18 cm Correct answer.
    2. 10.8 cm
    3. 21.6 cm
    4. 14.4 cm

    Explanation

    Cz lies at 50% of the nasion-inion distance along the midline. Multiplying 0.50 by 36 cm gives 18 cm.

  101. Question 101Scoring, interpretation, and report generation

    In adult polysomnography, sleep stages are assigned using epochs of what standard duration?

    1. 20 seconds
    2. 60 seconds
    3. 15 seconds
    4. 30 seconds Correct answer.

    Explanation

    Adult sleep studies are staged in 30-second epochs, and every epoch must receive exactly one stage. A 30-second epoch yields two epochs per minute and 120 epochs per hour of recording.

  102. Question 102Scoring, interpretation, and report generation

    Which finding in an epoch best supports scoring stage W in an adult whose eyes are closed?

    1. Alpha rhythm in occipital derivations for more than 50% of the epoch Correct answer.
    2. Sleep spindles occupying at least 20% of the epoch
    3. Vertex sharp waves in central channels for more than half of the epoch
    4. Slow eye movements in the EOG channels for more than half of the epoch

    Explanation

    Stage W is scored when alpha rhythm is present over the occipital region for more than 50% of the epoch in an individual who generates alpha. Alpha is best seen in O1-M2 and O2-M1 derivations.

  103. Question 103Scoring, interpretation, and report generation

    Which description correctly defines a K-complex?

    1. A sharply contoured 4-7 Hz wave occurring over the occipital region
    2. A well-delineated negative sharp wave immediately followed by a positive component lasting at least 0.5 second Correct answer.
    3. A train of 2-6 Hz waves over the frontal region lasting at least 1 second
    4. A burst of 11-16 Hz activity lasting at least 0.5 second

    Explanation

    A K-complex is a biphasic wave with an initial negative deflection followed by a positive component, with total duration of at least 0.5 second and maximal expression over frontal derivations. It must stand out from the background EEG.

  104. Question 104Scoring, interpretation, and report generation

    What is the minimum duration required for a sleep spindle to be scored?

    1. 0.1 second
    2. 0.5 second Correct answer.
    3. 0.25 second
    4. 2 seconds

    Explanation

    A sleep spindle must be a distinct train of 11-16 Hz activity lasting at least 0.5 second, usually maximal over central derivations. Shorter bursts are not scored as spindles for staging purposes.

  105. Question 105Scoring, interpretation, and report generation

    Slow wave activity must occupy at least what percentage of an epoch to score stage N3?

    1. 30%
    2. 50%
    3. 10%
    4. 20% Correct answer.

    Explanation

    Stage N3 is scored when waves of 0.5-2 Hz with peak-to-peak amplitude greater than 75 microvolts occupy 20% or more of the epoch, which equals 6 seconds of a 30-second epoch. The amplitude is measured over the frontal derivations.

  106. Question 106Scoring, interpretation, and report generation

    Which combination of findings is required to score stage R?

    1. Alpha rhythm in occipital channels with slow eye movements
    2. Slow wave activity over 20% of the epoch with low chin EMG tone
    3. Low-amplitude mixed-frequency EEG with K-complexes and high chin EMG tone
    4. Low-amplitude mixed-frequency EEG, low chin EMG tone, and rapid eye movements Correct answer.

    Explanation

    Stage R requires all three elements: low-amplitude mixed-frequency EEG, lowest chin EMG tone of the study, and rapid eye movements. Once R is established, it can continue without eye movements as long as tone remains low.

  107. Question 107Scoring, interpretation, and report generation

    The abrupt EEG frequency shift that defines a cortical arousal must last at least how long?

    1. 5 seconds
    2. 2 seconds
    3. 3 seconds Correct answer.
    4. 1 second

    Explanation

    An arousal is scored when there is an abrupt shift of EEG frequency, including alpha, theta, or frequencies greater than 16 Hz (but not spindles), lasting at least 3 seconds. In stage R an accompanying chin EMG increase is also required.

  108. Question 108Scoring, interpretation, and report generation

    An obstructive apnea is scored when airflow falls by at least what percentage of baseline for at least 10 seconds?

    1. 90% Correct answer.
    2. 30%
    3. 50%
    4. 70%

    Explanation

    Apneas require a 90% or greater drop in the peak signal excursion of airflow lasting at least 10 seconds. The event is obstructive when respiratory effort continues or increases during the period of reduced airflow.

  109. Question 109Scoring, interpretation, and report generation

    Under the recommended AASM rule, which set of criteria defines a hypopnea?

    1. A 90% or greater airflow reduction for at least 10 seconds with an arousal
    2. A 30% or greater airflow reduction for at least 10 seconds with a 4% desaturation only
    3. A 50% or greater airflow reduction for at least 10 seconds with a 4% desaturation
    4. A 30% or greater airflow reduction for at least 10 seconds with a 3% desaturation or an arousal Correct answer.

    Explanation

    The recommended hypopnea rule requires a 30% or greater drop in airflow lasting at least 10 seconds, accompanied by a 3% or greater oxygen desaturation or an arousal. The alternative acceptable rule substitutes a 4% desaturation requirement.

  110. Question 110Scoring, interpretation, and report generation

    A 12-second event shows absent airflow with absent thoracoabdominal effort. How should it be scored?

    1. Mixed apnea
    2. Central apnea Correct answer.
    3. Obstructive apnea
    4. Hypopnea

    Explanation

    Absent airflow with absent respiratory effort identifies a central apnea. A mixed apnea would show absent effort initially followed by resumption of effort before airflow returns.

  111. Question 111Scoring, interpretation, and report generation

    Periodic limb movements are scored when at least four consecutive limb movements occur with onset-to-onset intervals of what duration?

    1. 20 to 120 seconds
    2. 10 to 60 seconds
    3. 5 to 90 seconds Correct answer.
    4. 0.5 to 10 seconds

    Explanation

    A periodic limb movement series requires at least four consecutive movements, each lasting 0.5 to 10 seconds, with onset-to-onset intervals between 5 and 90 seconds. The movements are typically measured with anterior tibialis EMG.

  112. Question 112Scoring, interpretation, and report generation

    When scoring an arousal during stage R, which additional requirement applies?

    1. The frequency shift must last at least 10 seconds
    2. The arousal must be accompanied by a 3% desaturation
    3. A K-complex must immediately precede the frequency shift
    4. There must be a concurrent increase in chin EMG lasting at least 1 second Correct answer.

    Explanation

    Because REM sleep is characterized by low chin EMG tone, an arousal in stage R requires a simultaneous increase in chin EMG amplitude lasting at least 1 second. Arousals in NREM sleep do not require an EMG change.

  113. Question 113Scoring, interpretation, and report generation

    More than 15 seconds of a 30-second epoch are obscured by movement artifact, but alpha rhythm is visible for 3 seconds. How should the epoch be scored?

    1. Stage R
    2. Stage N2
    3. Stage N1
    4. Stage W Correct answer.

    Explanation

    When a major body movement obscures more than 15 seconds of an epoch, the presence of alpha rhythm for any portion of that epoch is sufficient to score it as stage W. If no alpha were present, the epoch would be staged according to neighboring epochs.

  114. Question 114Scoring, interpretation, and report generation

    A study documents 480 minutes in bed and 360 minutes of total sleep time. What is the sleep efficiency?

    1. 90%
    2. 70%
    3. 75% Correct answer.
    4. 80%

    Explanation

    Sleep efficiency equals total sleep time divided by time in bed, multiplied by 100. Here 360 divided by 480 equals 0.75, or 75%.

  115. Question 115Scoring, interpretation, and report generation

    A report includes 60 apneas, 30 hypopneas, and a total sleep time of 6 hours. What is the apnea-hypopnea index?

    1. 10 events per hour
    2. 20 events per hour
    3. 15 events per hour Correct answer.
    4. 18 events per hour

    Explanation

    The AHI is the total number of apneas plus hypopneas divided by total sleep time in hours. Here 90 events divided by 6 hours equals 15 events per hour.

  116. Question 116Scoring, interpretation, and report generation

    The pre-event baseline SpO2 is 96%. Which nadir value first satisfies a 3% desaturation criterion?

    1. 95%
    2. 94%
    3. 93% Correct answer.
    4. 96%

    Explanation

    A 3% desaturation is scored when the nadir falls at least 3 percentage points below the pre-event baseline, so a baseline of 96% requires a nadir of 93% or lower. The desaturation is measured against the stable baseline preceding the event.

  117. Question 117Scoring, interpretation, and report generation

    Alpha rhythm used to determine stage W is best identified in which derivations?

    1. C4-M1
    2. E1-M2
    3. O2-M1 Correct answer.
    4. F4-M1

    Explanation

    Alpha rhythm is maximally expressed over the occipital region, so occipital derivations such as O1-M2 and O2-M1 are used to judge whether alpha occupies more than 50% of an epoch. Frontal and central derivations are used for slow waves and spindles.

  118. Question 118Scoring, interpretation, and report generation

    Alpha rhythm attenuates after the first 8 seconds of an epoch and is replaced by low-amplitude mixed-frequency EEG with slow eye movements. How should the epoch be scored?

    1. Stage N1 Correct answer.
    2. Stage W
    3. Stage N2
    4. Stage R

    Explanation

    Stage W requires alpha rhythm for more than 50% of the epoch, which is not met here since alpha occupies only 8 seconds. Attenuation of alpha with low-amplitude mixed-frequency activity and slow eye movements marks the transition to stage N1.

  119. Question 119Scoring, interpretation, and report generation

    A patient is already in stage N2. The next epoch shows low-amplitude mixed-frequency EEG with no K-complexes, spindles, or slow waves, and no arousal or body movement occurs. How is the epoch scored?

    1. Stage N3
    2. Stage N2 Correct answer.
    3. Stage W
    4. Stage N1

    Explanation

    Once N2 has begun, it continues in epochs lacking K-complexes and spindles until an arousal, a transition to W, N3, or R, or a major body movement followed by slow eye movements occurs. The absence of N2-defining waveforms alone does not end the stage.

  120. Question 120Scoring, interpretation, and report generation

    A breathing sequence shows increasing respiratory effort that ends in an arousal, with airflow falling about 20% and no desaturation criterion met. How is this scored?

    1. Central apnea
    2. Cheyne-Stokes respiration
    3. Respiratory effort-related arousal Correct answer.
    4. Hypopnea

    Explanation

    A respiratory effort-related arousal is a progressive increase in respiratory effort terminating in an arousal that does not meet the criteria for apnea or hypopnea. A 20% airflow reduction falls below the 30% threshold for hypopnea.

  121. Question 121Scoring, interpretation, and report generation

    An epoch of stage N2 contains 8 seconds of 0.5-2 Hz activity at 90 microvolts peak-to-peak plus two K-complexes. How should the epoch be scored?

    1. Stage R
    2. Stage N2
    3. Stage N3 Correct answer.
    4. Stage N1

    Explanation

    Stage N3 requires slow waves of 0.5-2 Hz and greater than 75 microvolts to occupy at least 20% of the epoch, which equals 6 seconds in a 30-second epoch. Eight seconds of qualifying slow wave activity meets the threshold even though the epoch also contains N2 features.

  122. Question 122Scoring, interpretation, and report generation

    An arousal occurs out of stage N2, and the following epochs show low-amplitude mixed-frequency EEG without K-complexes, spindles, or slow waves. How should those epochs be scored?

    1. Continue as stage N2
    2. Stage W
    3. Stage N1 Correct answer.
    4. Stage R

    Explanation

    An arousal from N2 followed by low-amplitude mixed-frequency EEG without K-complexes or spindles marks a transition to stage N1. Scoring returns to N2 only when a K-complex or sleep spindle reappears.

  123. Question 123Scoring, interpretation, and report generation

    How many consecutive cycles of crescendo-decrescendo central respiratory events are required to score Cheyne-Stokes respiration?

    1. 2
    2. 10
    3. 3 Correct answer.
    4. 5

    Explanation

    Cheyne-Stokes respiration requires at least three consecutive cycles of a crescendo-decrescendo pattern of central apneas or hypopneas. The cycle duration must be at least 40 seconds to qualify.

  124. Question 124Scoring, interpretation, and report generation

    A patient is already established in stage R. An epoch shows low chin EMG tone and low-amplitude mixed-frequency EEG but no rapid eye movements. How is the epoch scored?

    1. Stage N1
    2. Stage W
    3. Stage N2
    4. Stage R Correct answer.

    Explanation

    Once REM sleep is established, it continues in epochs with low chin EMG tone and low-amplitude mixed-frequency EEG even when rapid eye movements are absent. Rapid eye movements are not required in every REM epoch.

  125. Question 125Scoring, interpretation, and report generation

    During stage R, the chin EMG shows a brief 2-second burst of muscle activity but tone otherwise remains at its lowest level, and rapid eye movements are present. How is the epoch scored?

    1. Stage R Correct answer.
    2. Stage W
    3. Stage N1
    4. Stage N2

    Explanation

    Transient muscle activity lasting less than the arousal-related duration does not end REM sleep when background chin tone remains low and REM features persist. The epoch continues to be scored as stage R.

  126. Question 126Scoring, interpretation, and report generation

    Standard polysomnographic staging assigns one sleep stage to each scoring epoch. How long is a single scoring epoch?

    1. 10 seconds
    2. 15 seconds
    3. 60 seconds
    4. 30 seconds Correct answer.

    Explanation

    Scoring is performed in 30-second epochs, and every epoch receives exactly one stage even when features of more than one stage are present. The 30-second page is the fixed unit to which all stage-percentage rules (such as the 20% slow-wave rule) are referenced.

  127. Question 127Scoring, interpretation, and report generation

    Which peak-to-peak amplitude threshold must a 0.5 to 2 Hz wave exceed to be counted as a slow wave for stage N3 scoring?

    1. 25 µV
    2. 50 µV
    3. 120 µV
    4. 75 µV Correct answer.

    Explanation

    A wave qualifies as a slow wave when its frequency is 0.5 to 2 Hz and its peak-to-peak amplitude exceeds 75 µV, measured from the frontal derivations. Waves below that amplitude are not counted toward the 20% epoch requirement regardless of frequency.

  128. Question 128Scoring, interpretation, and report generation

    What minimum duration must a K-complex have in order to be scored?

    1. 2 seconds
    2. 0.5 second Correct answer.
    3. 1 second
    4. 0.1 second

    Explanation

    A K-complex is a well-delineated negative sharp wave immediately followed by a positive component that stands out from background EEG and lasts at least 0.5 second. The 0.5-second minimum separates true K-complexes from briefer sharp transients.

  129. Question 129Scoring, interpretation, and report generation

    Sleep latency as reported on a polysomnogram is measured from lights out to which point?

    1. The first epoch of any sleep stage Correct answer.
    2. The first K-complex recorded during the study
    3. The first epoch scored as stage R
    4. The first spindle of the night

    Explanation

    Sleep latency ends at the first epoch scored as any sleep stage, whichever stage that is. It is distinct from REM latency, which begins at sleep onset and ends at the first epoch of stage R.

  130. Question 130Scoring, interpretation, and report generation

    The arousal index reported at the end of a study expresses the number of arousals per what denominator?

    1. Per hour of total sleep time Correct answer.
    2. Per epoch of recorded sleep
    3. Per minute of stage R
    4. Per hour of lights-out recording time

    Explanation

    Arousal index equals the total number of arousals divided by hours of total sleep time, consistent with other sleep-based indices such as the apnea-hypopnea index. Using time in bed or recording time would dilute the value with wake periods.

  131. Question 131Scoring, interpretation, and report generation

    In the standard AASM electrode montage, the left eye EOG electrode is referred to which electrode?

    1. M1
    2. C4
    3. O1
    4. M2 Correct answer.

    Explanation

    The left eye electrode is referred to the right mastoid (E1-M2), while the right eye electrode is referred to the left mastoid (E2-M1). This contralateral referencing helps produce out-of-phase deflections for conjugate eye movements.

  132. Question 132Scoring, interpretation, and report generation

    In a healthy adult, stage R occupies approximately what percentage of total sleep time?

    1. 2 to 5%
    2. 20 to 25% Correct answer.
    3. 45 to 55%
    4. 13 to 23%

    Explanation

    Normal adult sleep architecture places REM sleep at roughly 20 to 25% of total sleep time. The other listed ranges correspond to N1, N3, and N2 respectively.

  133. Question 133Scoring, interpretation, and report generation

    A report lists an overall apnea-hypopnea index of 22 events per hour. How is this obstructive sleep apnea severity categorized?

    1. Moderate Correct answer.
    2. Severe
    3. Mild
    4. Normal

    Explanation

    Severity bands are 5 to under 15 per hour for mild, 15 to 30 per hour for moderate, and greater than 30 per hour for severe. An index of 22 falls in the moderate range.

  134. Question 134Scoring, interpretation, and report generation

    Wake after sleep onset (WASO) in a standard report represents which interval?

    1. All wake time between lights out and lights on
    2. Wake time recorded after lights on
    3. Wake time between sleep onset and lights on Correct answer.
    4. Wake time between lights out and sleep onset

    Explanation

    WASO counts only the wake epochs that occur after the first epoch of sleep and before lights on. Wake before sleep onset is reported separately as sleep latency, and time after lights on is outside the recording period.

  135. Question 135Scoring, interpretation, and report generation

    REM latency is calculated as the interval from sleep onset to which point?

    1. The time of the first body movement
    2. The first epoch scored as stage R Correct answer.
    3. The end of the first REM period
    4. The first sleep spindle of the night

    Explanation

    REM latency begins at the first epoch of any sleep stage and ends at the first epoch scored as stage R. It therefore measures how long the patient takes to reach REM after falling asleep.

  136. Question 136Scoring, interpretation, and report generation

    Sleep spindles used to identify stage N2 consist of a train of waves at what frequency?

    1. 4 to 7 Hz
    2. 0.5 to 2 Hz
    3. 11 to 16 Hz Correct answer.
    4. 20 to 30 Hz

    Explanation

    Spindles are trains of distinct waves at 11 to 16 Hz, most often 12 to 14 Hz, lasting at least 0.5 second and maximal over central derivations. Slower frequencies describe slow waves or theta activity rather than spindles.

  137. Question 137Scoring, interpretation, and report generation

    Which description best characterizes the slow eye movements that support scoring of stage N1?

    1. Conjugate, sinusoidal, initial deflection over 500 ms Correct answer.
    2. Irregular rapid movements with high chin tone
    3. Vertical movements at 1 Hz linked to blinks
    4. Sharply peaked conjugate movements with deflection under 500 ms

    Explanation

    Slow eye movements are conjugate, reasonably regular, sinusoidal excursions whose initial deflection lasts longer than 500 ms. This contrasts with the rapid eye movements of stage R, which are sharply peaked with an initial deflection under 500 ms.

  138. Question 138Scoring, interpretation, and report generation

    When two different sleep stages each occupy a substantial portion of one epoch, how is that epoch staged?

    1. The lighter of the two stages
    2. The stage that follows in the next epoch
    3. The stage occupying the greatest portion Correct answer.
    4. The stage occupying the final 15 seconds

    Explanation

    Each epoch is assigned the stage that occupies the greatest proportion of the 30 seconds. The stage of the following epoch and the concept of a lighter stage play no role in this decision.

  139. Question 139Scoring, interpretation, and report generation

    Before an abrupt EEG frequency shift can be scored as an arousal during stage N2, how much stable sleep must immediately precede it?

    1. 15 seconds
    2. 30 seconds
    3. 10 seconds Correct answer.
    4. 3 seconds

    Explanation

    An arousal requires at least 10 seconds of stable sleep immediately before the abrupt shift, which ensures that the shift is a true transient rather than part of ongoing instability. The shift itself must last at least 3 seconds.

  140. Question 140Scoring, interpretation, and report generation

    A 12-second sequence shows progressively increasing respiratory effort that ends in an arousal, while airflow drops only about 20% and oxygen saturation does not fall. How should this be scored?

    1. Central apnea with absent effort
    2. Respiratory effort-related arousal Correct answer.
    3. Obstructive hypopnea meeting desaturation criteria
    4. A normal respiratory sequence

    Explanation

    A sequence of increasing respiratory effort lasting at least 10 seconds that terminates in an arousal, without meeting apnea or hypopnea criteria, is scored as a respiratory effort-related arousal. The 20% airflow reduction is insufficient for hypopnea and effort is clearly present.

  141. Question 141Scoring, interpretation, and report generation

    To be scored as a leg movement, the anterior tibialis EMG deflection must rise at least how far above the baseline?

    1. 8 µV Correct answer.
    2. 25 µV
    3. 75 µV
    4. 3 µV

    Explanation

    A leg movement must produce an EMG increase of at least 8 µV above the resting baseline and last 0.5 to 10 seconds. The 8 µV criterion is what separates true movements from low-level background fluctuation.

  142. Question 142Scoring, interpretation, and report generation

    A study with 7 hours of total sleep time contains 84 oxygen desaturations meeting the scoring criteria. What is the oxygen desaturation index?

    1. 12 per hour Correct answer.
    2. 84 per hour
    3. 21 per hour
    4. 8 per hour

    Explanation

    The oxygen desaturation index divides the number of qualifying desaturations by hours of total sleep time, so 84 divided by 7 equals 12 per hour. The index is expressed per hour of sleep, not as a raw count.

  143. Question 143Scoring, interpretation, and report generation

    In a patient who generates no alpha rhythm, which finding supports scoring an epoch as stage W?

    1. Eye blinks at 0.5 to 2 Hz Correct answer.
    2. Slow sinusoidal eye movements
    3. Vertex sharp waves
    4. Sleep spindles

    Explanation

    When alpha rhythm cannot be used, wakefulness is identified by blinks at 0.5 to 2 Hz, reading eye movements, or irregular conjugate eye movements accompanied by normal or high chin EMG tone. These features are absent in established sleep.

  144. Question 144Scoring, interpretation, and report generation

    During a 4-minute period of wakefulness after lights on, the patient shows repeated 15-second airflow reductions with 4% desaturations. How should these be handled?

    1. Scored as hypopneas because desaturation criteria are met
    2. Scored as apneas if airflow is absent
    3. Not scored, because events are scored only during sleep Correct answer.
    4. Scored but excluded from the AHI

    Explanation

    Respiratory events are scored only during sleep, so episodes occurring after lights on are not scored regardless of desaturation. Wakefulness commonly produces irregular breathing that would otherwise inflate event counts.

  145. Question 145Scoring, interpretation, and report generation

    Which filter settings are recommended for routine EEG channels on a diagnostic polysomnogram?

    1. 10 Hz and 100 Hz
    2. 0.1 Hz and 15 Hz
    3. 0.3 Hz and 35 Hz Correct answer.
    4. 1 Hz and 70 Hz

    Explanation

    EEG channels use a low-frequency filter of 0.3 Hz and a high-frequency filter of 35 Hz, which preserves slow waves while removing higher-frequency artifact. Chin EMG uses a much higher low-frequency setting, typically 10 Hz.

  146. Question 146Scoring, interpretation, and report generation

    An epoch contains 10 seconds of 1 Hz activity at 70 µV peak-to-peak in the frontal derivations; the remainder shows spindles and K-complexes. How should the epoch be scored?

    1. Stage N3
    2. Stage N1
    3. Stage W
    4. Stage N2 Correct answer.

    Explanation

    The waves fail the slow-wave amplitude criterion because they do not exceed 75 µV, so no slow-wave time accrues toward the 20% requirement. With spindles and K-complexes present and no qualifying slow waves, the epoch remains stage N2.

  147. Question 147Scoring, interpretation, and report generation

    A study records 90 obstructive apneas, 30 central apneas, and 45 hypopneas during 7.5 hours of total sleep time. What is the apnea-hypopnea index?

    1. 12 events per hour
    2. 24 events per hour
    3. 16 events per hour
    4. 22 events per hour Correct answer.

    Explanation

    All apneas, whether obstructive or central, plus all hypopneas are summed and divided by hours of total sleep time. The total of 165 events divided by 7.5 hours equals 22 events per hour.

  148. Question 148Scoring, interpretation, and report generation

    A patient has 30 leg movements associated with arousals during 5 hours of total sleep time. What is the periodic limb movement arousal index?

    1. 3 per hour
    2. 150 per hour
    3. 30 per hour
    4. 6 per hour Correct answer.

    Explanation

    The PLM arousal index counts only those leg movements followed by an arousal and divides by hours of total sleep time. Thirty such movements over 5 hours gives 6 per hour.

  149. Question 149Scoring, interpretation, and report generation

    A report shows an overall apnea-hypopnea index of 6 per hour but a supine index of 38 per hour, with only 25 minutes of supine sleep. Which interpretation is most appropriate?

    1. A technically inadequate study
    2. Normal study because overall AHI is below 15
    3. Position-dependent obstructive sleep apnea Correct answer.
    4. Central sleep apnea

    Explanation

    A large discrepancy between the overall index and the supine index indicates that events cluster in the supine position, a common pattern of position-dependent obstructive sleep apnea. The overall value is diluted by the short supine time and understates severity in that posture.

  150. Question 150Scoring, interpretation, and report generation

    A report lists a central apnea index of 18, an obstructive apnea index of 4, and a hypopnea index of 3 per hour. Which interpretation fits best?

    1. Mixed apnea of equal contributions
    2. Cheyne-Stokes respiration is confirmed
    3. Predominantly central sleep apnea Correct answer.
    4. Predominantly obstructive sleep apnea

    Explanation

    Central apneas clearly outnumber obstructive apneas and hypopneas, so the disorder is characterized as predominantly central. Identifying a central predominance does not by itself establish a specific pattern such as Cheyne-Stokes respiration.

  151. Question 151Therapeutic interventions, patient safety, and professional standards

    During an overnight study, supplemental oxygen is generally indicated when the SpO2 remains at or below which level for five minutes or more?

    1. 94%
    2. 88% Correct answer.
    3. 85%
    4. 80%

    Explanation

    Practice parameters direct the technologist to consider supplemental oxygen when oxyhemoglobin saturation stays at or below 88% for five minutes or longer. Treating at this threshold corrects prolonged hypoxemia without exposing the patient to unnecessary oxygen.

  152. Question 152Therapeutic interventions, patient safety, and professional standards

    Which action is unsafe for a patient receiving supplemental oxygen in the sleep laboratory?

    1. Covering the patient with a cotton blanket
    2. Applying a petroleum-based ointment to the nares Correct answer.
    3. Using a water-based lubricant on the nares
    4. Running a heated humidifier with the oxygen source

    Explanation

    Petroleum-based products are flammable and can ignite in an oxygen-enriched environment, so water-based lubricants must be substituted. Oxygen itself does not burn, but it accelerates combustion of oils, fabrics, and other fuels.

  153. Question 153Therapeutic interventions, patient safety, and professional standards

    Which measure is the single most effective way to prevent transmission of infection between patients in the sleep center?

    1. Disinfecting the bed rails once each morning
    2. Performing hand hygiene before and after contact Correct answer.
    3. Wearing gloves for every patient contact
    4. Spraying alcohol sanitizer on reusable sensors

    Explanation

    Hand hygiene is the cornerstone of standard precautions and interrupts the main route of cross-transmission in healthcare settings. Gloves supplement but never replace hand washing.

  154. Question 154Therapeutic interventions, patient safety, and professional standards

    During a CPAP titration, at what point should the technologist typically raise the pressure?

    1. When obstructive events or snoring persist at the current pressure Correct answer.
    2. When central apneas appear for the first time
    3. Only when the patient falls into REM sleep
    4. Whenever the patient reports any mask discomfort

    Explanation

    Titration proceeds by increasing pressure while obstructive apneas, hypopneas, flow limitation, snoring, or respiratory-effort-related arousals persist. Pressure is raised in small increments and stopped once the airway is controlled in all sleep stages and positions.

  155. Question 155Therapeutic interventions, patient safety, and professional standards

    Which patient is most likely to benefit from bilevel PAP rather than fixed CPAP?

    1. A patient with an AHI of 6 who has no daytime symptoms
    2. A patient with mild positional OSA and no comorbid illness
    3. A patient with obesity hypoventilation who cannot tolerate high CPAP Correct answer.
    4. A patient whose apnea resolves at 5 cm H2O

    Explanation

    Bilevel PAP is used when the CPAP pressure required is high and poorly tolerated, or when ventilation must be supported, as in obesity hypoventilation syndrome. It delivers separate inspiratory and expiratory pressures to ease exhalation.

  156. Question 156Therapeutic interventions, patient safety, and professional standards

    Adaptive servo-ventilation should be avoided in which patient?

    1. A patient with symptomatic heart failure and an ejection fraction of 40% Correct answer.
    2. A patient with central sleep apnea taking chronic opioids
    3. A patient with treatment-emergent central apnea on CPAP
    4. A patient with Cheyne-Stokes respiration and an ejection fraction of 55%

    Explanation

    ASV is contraindicated in patients with symptomatic heart failure and a left ventricular ejection fraction of 45% or less who have predominantly central sleep apnea, because of increased cardiovascular mortality in that population. Other central apnea populations remain candidates for the therapy.

  157. Question 157Therapeutic interventions, patient safety, and professional standards

    How should supplemental oxygen be introduced into a PAP circuit?

    1. Inject it into the air intake of the PAP device
    2. Attach a bleed-in adapter at the mask Correct answer.
    3. Run the tubing into the humidifier chamber
    4. Tape the tubing over the exhalation port

    Explanation

    Oxygen is blended in at the patient end of the circuit so the delivered fraction is predictable and the device is not pressurized with oxygen. Connecting oxygen at the machine intake or enclosing it inside the device creates a serious fire risk.

  158. Question 158Therapeutic interventions, patient safety, and professional standards

    Which usage pattern typically meets the payer definition of PAP adherence?

    1. At least 2 hours per night on every night
    2. At least 4 hours per night on 70% of nights Correct answer.
    3. At least 6 hours per night on 70% of nights
    4. At least 4 hours per night on 50% of nights

    Explanation

    Most US payers define adherence as PAP use of at least 4 hours per night on at least 70% of nights during a 30-day period. Meeting this benchmark supports continued coverage of the device.

  159. Question 159Therapeutic interventions, patient safety, and professional standards

    A patient on PAP reports air blowing into the eyes from the top of the mask. What should the technologist do first?

    1. Increase the prescribed pressure
    2. Refit the cushion and adjust strap tension Correct answer.
    3. End the titration for the night
    4. Exchange the device for a bilevel machine

    Explanation

    Eye leak usually reflects an improperly seated cushion or over-tightened straps that deform the seal. Refitting and modest strap adjustment resolve most leaks before any change in therapy is considered.

  160. Question 160Therapeutic interventions, patient safety, and professional standards

    A patient on high CPAP develops bloating, belching, and abdominal discomfort. Which intervention is most appropriate?

    1. Adding supplemental oxygen to the circuit
    2. Placing the patient flat in the supine position
    3. Reduce the pressure or switch to bilevel PAP Correct answer.
    4. Raising the pressure to splint the airway open

    Explanation

    Aerophagia results from air being forced past the esophageal sphincter at higher pressures. Lowering the pressure, using bilevel support, or applying positional measures reduces the swallowing of air.

  161. Question 161Therapeutic interventions, patient safety, and professional standards

    A patient panics and pulls off the mask shortly after PAP is started. Which approach is most appropriate?

    1. Tell the patient that discomfort is not a valid reason to stop
    2. Discontinue PAP permanently for this patient
    3. Try a nasal pillow mask and awake desensitization Correct answer.
    4. Increase the pressure so the patient adjusts faster

    Explanation

    Claustrophobia improves with a lower-profile interface and gradual habituation while the patient is awake. Building tolerance in short trials is more effective than forcing full-night use.

  162. Question 162Therapeutic interventions, patient safety, and professional standards

    A patient's AHI is 14 in the supine position and 2 in non-supine positions. Which option is most reasonable to discuss?

    1. Immediate tracheostomy referral
    2. Positional therapy to avoid supine sleep Correct answer.
    3. Fixed CPAP at 15 cm H2O for all positions
    4. Yearly overnight oximetry with no treatment

    Explanation

    When events are concentrated in the supine position and the non-supine AHI is normal, positional therapy is a legitimate alternative for a motivated patient. Its success depends on reliably avoiding supine sleep.

  163. Question 163Therapeutic interventions, patient safety, and professional standards

    Which statement about a mandibular advancement device is accurate?

    1. It is the preferred therapy for severe OSA with heart failure
    2. A dentist advances the mandible to open the airway Correct answer.
    3. It is contraindicated in every patient with mild OSA
    4. It requires an in-laboratory pressure titration

    Explanation

    Oral appliances are custom-fitted by a dental provider trained in sleep medicine and gradually advanced to enlarge the pharyngeal airway. Follow-up testing then confirms whether the device controls the apnea.

  164. Question 164Therapeutic interventions, patient safety, and professional standards

    Which finding supports candidacy for hypoglossal nerve stimulation?

    1. Complete concentric palatal collapse on sleep endoscopy
    2. An AHI of 65 with predominantly central events
    3. CPAP intolerance with moderate OSA and a BMI under 32 Correct answer.
    4. A body mass index of 40 kg/m2 with severe OSA

    Explanation

    Hypoglossal nerve stimulation is indicated for CPAP-intolerant adults with moderate-to-severe OSA who are not markedly obese and who lack complete concentric collapse of the palate. Appropriate anatomy and implant candidacy are confirmed before surgery.

  165. Question 165Therapeutic interventions, patient safety, and professional standards

    A patient with delayed sleep phase syndrome asks how to shift sleep earlier. Which recommendation is most appropriate?

    1. Staying in a dark room throughout the morning
    2. Bright light exposure in the evening hours
    3. Morning bright light with a gradually earlier bedtime Correct answer.
    4. Sleeping late on weekends to repay sleep debt

    Explanation

    Morning bright light advances the circadian pacemaker, and gradually moving the bedtime earlier consolidates that shift. Evening light would delay the rhythm further.

  166. Question 166Therapeutic interventions, patient safety, and professional standards

    Which instruction reflects stimulus control therapy for insomnia?

    1. Read and watch television in bed to relax before sleep
    2. Extend time in bed to increase the opportunity for sleep
    3. Leave the bed if awake for about 20 minutes Correct answer.
    4. Take a long afternoon nap to reduce sleep pressure at night

    Explanation

    Stimulus control re-establishes the bed as a cue for sleep by restricting it to sleep and intimacy and by leaving the bed when wakefulness persists. This breaks the learned association between the bed and arousal.

  167. Question 167Therapeutic interventions, patient safety, and professional standards

    A caller identifying themselves as the patient's adult child asks for the sleep study results. What is the appropriate response?

    1. Mail a copy to any address the caller supplies
    2. Read the results aloud if the caller verifies the date of birth
    3. Provide a summary because family members are permitted access
    4. Decline without the patient's written authorization Correct answer.

    Explanation

    Protected health information may be disclosed only with the patient's written authorization or as otherwise permitted by law. A family relationship alone confers no right of access.

  168. Question 168Therapeutic interventions, patient safety, and professional standards

    A patient is found on the floor after an unwitnessed fall. What should the technologist do first?

    1. Assess the patient, then document and report Correct answer.
    2. Complete the incident report before touching the patient
    3. Call the family before checking the patient
    4. Return the patient to bed and omit documentation

    Explanation

    The immediate priority is patient assessment and care; documentation and incident reporting follow once the patient is safe. Incident reports support quality improvement and risk management.

  169. Question 169Therapeutic interventions, patient safety, and professional standards

    Which practice is correct for reusable PAP interfaces between patients?

    1. Rinse the mask in water and hand it to the next patient
    2. Wipe only the humidifier chamber and reuse the rest
    3. Sterilize the tubing in an autoclave after every night
    4. Clean and disinfect per the manufacturer's instructions Correct answer.

    Explanation

    Reusable devices must be cleaned and receive the level of disinfection specified by the manufacturer between patients. Following validated manufacturer instructions keeps the device both safe and undamaged.

  170. Question 170Therapeutic interventions, patient safety, and professional standards

    The technologist finds the patient unresponsive with a strong pulse and shallow breathing. What is the appropriate action?

    1. Wait several minutes to see whether the patient arouses
    2. Give the patient water to drink
    3. Call for help and support the airway and breathing Correct answer.
    4. Start chest compressions immediately

    Explanation

    An unresponsive patient with a pulse but inadequate breathing needs emergency activation, airway positioning, and ventilatory support. Compressions are reserved for a patient without a pulse.

  171. Question 171Therapeutic interventions, patient safety, and professional standards

    Which practice lowers the risk of electrical injury in the sleep laboratory?

    1. Removing the ground prong when an outlet has no third hole
    2. Daisy-chaining power strips along the wall
    3. Inspecting cords and using grounded three-prong plugs Correct answer.
    4. Resting a beverage on top of a recording unit

    Explanation

    Grounded plugs and intact cords protect both patient and staff from shock and are part of routine equipment safety checks. Damaged or modified cords should be removed from service.

  172. Question 172Therapeutic interventions, patient safety, and professional standards

    Which approach is appropriate when fitting PAP for a young child?

    1. Skip titration and prescribe a fixed pressure of 12 cm H2O
    2. Use child-sized interfaces and include the caregiver Correct answer.
    3. Apply adult pressure targets without adjustment
    4. Exclude the caregiver from the room during setup

    Explanation

    Pediatric PAP depends on properly sized interfaces and on caregiver support, which improves tolerance and adherence. Pressures must be individually titrated rather than borrowed from adult protocols.

  173. Question 173Therapeutic interventions, patient safety, and professional standards

    A patient arrives for a study with a tracheostomy and a portable ventilator. What should the technologist do?

    1. Confirm ventilator settings and emergency equipment with the provider Correct answer.
    2. Remove the ventilator for the night to simplify scoring
    3. Cap the tracheostomy during sleep
    4. Cancel the study; tracheostomy patients cannot be studied

    Explanation

    Ventilator-dependent patients require confirmation of settings, backup power, and emergency equipment before recording begins. The technologist monitors rather than alters prescribed ventilatory support.

  174. Question 174Therapeutic interventions, patient safety, and professional standards

    How is the RPSGT credential maintained after initial certification?

    1. Renewal every five years with continuing education Correct answer.
    2. It renews annually on payment of a fee alone
    3. It is a lifetime certification that never needs renewal
    4. It is renewed every 10 years by examination

    Explanation

    Recertification occurs on a five-year cycle and requires continuing education credits that demonstrate ongoing competence in sleep technology. Recertification may also be achieved by re-examination.

  175. Question 175Therapeutic interventions, patient safety, and professional standards

    A confused patient keeps trying to climb out of bed during the night. Which action is most appropriate?

    1. Give an over-the-counter sleep aid to promote drowsiness
    2. Lower the bed and monitor the patient closely Correct answer.
    3. Apply soft wrist restraints for the rest of the night
    4. Leave the room dark and check on the patient once an hour

    Explanation

    Less restrictive measures such as lowering the bed, reducing fall distance, and increasing supervision are tried before restraints are considered. Restraints require a provider order and are never applied by the technologist independently.

  176. Question 176Therapeutic interventions, patient safety, and professional standards

    During a CPAP titration, a patient reports nasal dryness and congestion, and the heated humidifier is currently off. What is the most appropriate action?

    1. Discontinue the study and reschedule the patient
    2. Turn on the heated humidifier and adjust the setting for comfort Correct answer.
    3. Change to a full-face mask immediately
    4. Increase the CPAP pressure by 2 cm H2O

    Explanation

    Heated humidification adds moisture to the delivered airflow and directly relieves dryness-related nasal congestion and discomfort. It is a first-line, non-invasive adjustment that does not alter the prescribed pressure.

  177. Question 177Therapeutic interventions, patient safety, and professional standards

    Which action is required immediately before the technologist handles a patient's PAP interface or performs any direct patient care?

    1. Donning a fluid-resistant gown
    2. Performing hand hygiene Correct answer.
    3. Applying a clean pair of gloves only
    4. Wiping the interface with an alcohol pad

    Explanation

    Hand hygiene is the single most effective infection-control measure and is required before and after direct patient contact and before handling equipment that touches the patient.

  178. Question 178Therapeutic interventions, patient safety, and professional standards

    What oxygen saturation range is generally targeted during a PAP titration?

    1. 90% or higher Correct answer.
    2. 80% to 85%
    3. 86% to 89%
    4. Exactly 100%

    Explanation

    Titration aims to maintain oxygenation at or above 90% throughout the study. Persistent desaturation below this threshold indicates that additional pressure or supplemental oxygen is needed.

  179. Question 179Therapeutic interventions, patient safety, and professional standards

    A patient reports that the starting PAP pressure feels too forceful when trying to fall asleep. Which device feature is designed to address this?

    1. Ramp Correct answer.
    2. Backup rate
    3. Trigger sensitivity
    4. Inspiratory time maximum

    Explanation

    The ramp feature begins at a lower pressure and gradually increases to the prescribed level, allowing the patient to fall asleep before full pressure is reached.

  180. Question 180Therapeutic interventions, patient safety, and professional standards

    Which bilevel setting delivers a mandatory breath when the patient fails to initiate one?

    1. Inspiratory positive airway pressure
    2. Backup rate Correct answer.
    3. Rise time
    4. Cycle sensitivity

    Explanation

    The backup rate provides a set number of mandatory breaths per minute so that ventilation is maintained when the patient does not trigger spontaneous breaths.

  181. Question 181Therapeutic interventions, patient safety, and professional standards

    An employer calls the sleep laboratory asking to confirm that an employee was seen there. What is the appropriate response?

    1. Confirm only the date of the visit
    2. Decline to confirm or deny until the patient provides written authorization Correct answer.
    3. Read the appointment time from the scheduling log
    4. Confirm the visit if the caller provides the employee identification number

    Explanation

    Even the fact that a patient was seen is protected health information. It cannot be disclosed to an employer without the patient's written authorization, regardless of the caller's stated purpose.

  182. Question 182Therapeutic interventions, patient safety, and professional standards

    Which action best reduces fall risk for an older patient who must use the restroom overnight?

    1. Assist the patient and keep the call light within reach Correct answer.
    2. Keep the room fully dark to promote sleep
    3. Raise the bed to its highest position
    4. Apply soft limb restraints

    Explanation

    Assisted ambulation with an accessible call light addresses the most common fall scenario, unassisted nighttime toileting. Environmental modification and supervision are preferred over restraint.

  183. Question 183Therapeutic interventions, patient safety, and professional standards

    Which practice reflects appropriate documentation in the sleep laboratory?

    1. Recording events as they occur with the time, intervention, and patient response Correct answer.
    2. Omitting routine interventions to keep the record concise
    3. Recording entries at the end of the shift from memory
    4. Using another technologist's login when busy

    Explanation

    Contemporaneous entries that include time, action taken, and patient response create an accurate and defensible record. Reconstructing events later introduces error and weakens credibility.

  184. Question 184Therapeutic interventions, patient safety, and professional standards

    A patient with severe OSA cannot tolerate CPAP at 15 cm H2O despite repeated mask refits and humidification. Which option is most appropriate to discuss?

    1. Positional therapy alone
    2. Stopping treatment permanently
    3. Upper airway surgery as first-line therapy
    4. Bilevel positive airway pressure Correct answer.

    Explanation

    Bilevel PAP delivers separate inspiratory and expiratory pressures, which lowers expiratory work and improves tolerance when high CPAP pressures are not tolerated.

  185. Question 185Therapeutic interventions, patient safety, and professional standards

    For which patient is auto-titrating PAP least appropriate?

    1. A patient with mild OSA who wants automatic pressure adjustment
    2. A patient who needs a periodic pressure recheck
    3. A patient with treatment-emergent central sleep apnea Correct answer.
    4. A patient who travels frequently and prefers a compact device

    Explanation

    Auto-titrating devices respond to events by raising pressure, which can worsen central sleep apnea and obscure the pattern. A fixed pressure or a device with a backup rate is generally preferred when central events are present.

  186. Question 186Therapeutic interventions, patient safety, and professional standards

    A patient with claustrophobia cannot tolerate a full-face mask. Which interface is most reasonable to try next?

    1. Nasal pillows Correct answer.
    2. A larger full-face mask
    3. A helmet-style interface
    4. A total face mask that covers the eyes

    Explanation

    Nasal pillows sit at the nares and leave most of the face uncovered, which typically reduces the sensation of enclosure that drives claustrophobia.

  187. Question 187Therapeutic interventions, patient safety, and professional standards

    Which instruction reflects sleep restriction therapy?

    1. Remain in bed in the morning until fully rested
    2. Take a two-hour nap every afternoon
    3. Limit time in bed to near the average total sleep time, then extend gradually as sleep efficiency improves Correct answer.
    4. Go to bed earlier each night until sleep improves

    Explanation

    Sleep restriction compresses time in bed to match actual sleep ability, which increases sleep drive and efficiency. Time is then titrated upward as consolidation improves.

  188. Question 188Therapeutic interventions, patient safety, and professional standards

    A patient traveling east across six time zones asks how to use melatonin for jet lag. What guidance is appropriate?

    1. Take melatonin every night for at least a month
    2. Melatonin has no role in jet lag management
    3. Take melatonin each morning at the destination
    4. Take melatonin in the evening at the destination for a few days Correct answer.

    Explanation

    Evening melatonin at the destination helps advance circadian timing after eastward travel, when the body clock runs later than local time. Short-term use around arrival is the usual approach.

  189. Question 189Therapeutic interventions, patient safety, and professional standards

    A technologist working permanent night shifts wants to improve daytime sleep. Which light exposure strategy is appropriate?

    1. Bright light during the night shift and dim light on the morning commute home Correct answer.
    2. Bright light in the afternoon before the shift
    3. Complete darkness during the entire shift
    4. Avoiding all light exposure at all times

    Explanation

    Bright light during the night shift supports alertness and circadian adaptation, while limiting morning light prevents the clock from being pulled back toward a daytime schedule.

  190. Question 190Therapeutic interventions, patient safety, and professional standards

    At the start of a shift, a technologist suspects that a coworker is impaired by alcohol. What is the appropriate action?

    1. Confront the coworker privately and drop the matter
    2. Report the concern through the chain of command according to facility policy Correct answer.
    3. Ask the evening patients to reschedule
    4. Cover the coworker's assignments quietly for the night

    Explanation

    Suspected impairment is a patient safety issue that must be reported through established channels so that patients are protected and the coworker can receive appropriate assistance.

  191. Question 191Therapeutic interventions, patient safety, and professional standards

    A patient scheduled for a titration says they do not understand why a mask will be used. What should the technologist do?

    1. Proceed because the physician already ordered the study
    2. Postpone the study without further discussion
    3. Tell the patient that consent was obtained at scheduling
    4. Explain the purpose, risks, benefits, and alternatives, and confirm the patient agrees to proceed Correct answer.

    Explanation

    Informed consent requires that the patient understands the purpose of the procedure, its risks and benefits, and available alternatives before it begins.

  192. Question 192Therapeutic interventions, patient safety, and professional standards

    A patient experiences a generalized seizure in bed during the night. What is the appropriate action?

    1. Protect the patient from injury, avoid restraint, time the event, and call for help Correct answer.
    2. Leave the room to obtain a basin of water
    3. Hold the limbs firmly to stop the movements
    4. Place a spoon between the teeth to protect the tongue

    Explanation

    Seizure first aid focuses on protecting the patient from injury, avoiding restraint, timing the event, and summoning assistance. Nothing should be placed in the mouth.

  193. Question 193Therapeutic interventions, patient safety, and professional standards

    Which practice is correct when supplemental oxygen is in use in the sleep laboratory?

    1. Post no-smoking signage and keep oxygen away from open flames and heat sources Correct answer.
    2. Store cylinders horizontally next to the room heater
    3. Apply petroleum jelly to the nares to prevent dryness
    4. Permit smoking only when a window is open

    Explanation

    Oxygen accelerates combustion, so ignition sources must be eliminated and signage posted. Cylinders must be secured upright and kept away from heat.

  194. Question 194Therapeutic interventions, patient safety, and professional standards

    A patient develops redness and skin breakdown over the nasal bridge after several nights of PAP use. Which action is most appropriate?

    1. Tighten the headgear to reduce movement
    2. Discontinue PAP therapy permanently
    3. Refit the mask, consider a different cushion or interface, and protect the skin Correct answer.
    4. Apply a snug bandage over the area and continue

    Explanation

    Pressure injury from an interface is managed by reducing focal pressure through refitting, alternative cushion types, and skin protection while maintaining therapy.

  195. Question 195Therapeutic interventions, patient safety, and professional standards

    An overweight patient with newly diagnosed OSA is starting PAP therapy. Which adjunctive recommendation is most appropriate?

    1. Delay all follow-up until symptoms worsen
    2. Sleep in the supine position every night
    3. Increase evening alcohol intake to aid relaxation
    4. Pursue gradual weight loss along with PAP use Correct answer.

    Explanation

    Weight loss reduces AHI and improves overall cardiometabolic health, and it is recommended as an adjunct to PAP rather than a replacement for it.

  196. Question 196Therapeutic interventions, patient safety, and professional standards

    A patient's PAP device shows a persistently high leak and the patient reports worsening daytime sleepiness. What is the most appropriate first step?

    1. Replace the device with a different model
    2. Review the leak data and inspect the mask, headgear, and circuit for the source Correct answer.
    3. Raise the prescribed pressure to compensate for the leak
    4. Dismiss the leak because the device adjusts automatically

    Explanation

    Large leak degrades pressure delivery and event detection, so the source must be identified and corrected before any other change. Data review plus a physical inspection localizes the problem.

  197. Question 197Therapeutic interventions, patient safety, and professional standards

    A manager asks a technologist to document a titration that was not actually performed so the study can be billed. What is the appropriate response?

    1. Refuse the request and report it through the compliance channel Correct answer.
    2. Document it as requested because the manager approved
    3. Ask a coworker to sign the entry instead
    4. Document a partial study to reduce the charge

    Explanation

    Documenting a service that was not provided is fraud. The technologist must refuse and report the request through the organization's compliance process.

  198. Question 198Therapeutic interventions, patient safety, and professional standards

    Which task falls within the scope of practice of an RPSGT working in a sleep laboratory?

    1. Performing a PAP titration according to the physician's protocol Correct answer.
    2. Diagnosing obstructive sleep apnea
    3. Ordering a sleep study for a patient
    4. Prescribing a PAP pressure for home use

    Explanation

    Technologists perform attended titrations and related monitoring under physician direction and protocol. Diagnosis, prescribing, and ordering are reserved for licensed clinicians.

  199. Question 199Therapeutic interventions, patient safety, and professional standards

    During a titration, a patient develops chest pain with diaphoresis and nausea. What is the appropriate action?

    1. Stop the titration, summon emergency help, and provide care per protocol Correct answer.
    2. Ask the patient to wait until the morning technologist arrives
    3. Continue the study and document the symptoms
    4. Give the patient an antacid and reassess in one hour

    Explanation

    Chest pain with diaphoresis and nausea suggests acute cardiac ischemia, which is a medical emergency. The study is terminated and emergency response is activated immediately.

  200. Question 200Therapeutic interventions, patient safety, and professional standards

    A patient on the second night of a titration asks the technologist to lower the pressure because it feels uncomfortable. What is the appropriate response?

    1. Turn off the device and let the patient sleep without therapy
    2. Reduce the pressure to whatever the patient finds comfortable
    3. Instruct the patient to adjust the pressure at home
    4. Explain that the pressure is prescribed and contact the ordering clinician with the concern Correct answer.

    Explanation

    The technologist may adjust pressure only within the parameters of the physician's order or protocol. Concerns outside that scope are communicated to the ordering clinician.

RPSGT flashcards

32 cards. Read the term and the definition here. The deck at the top of this page is optional.

EEG electrode impedance limit
Before polysomnography, each EEG electrode impedance should be at or below 5 kΩ; higher impedance increases noise and artifact.
C4-M1 derivation
The C4-M1 EEG channel is the primary central derivation recommended by AASM, with C3-M2 as its backup for sleep staging.
EOG electrode placement
E1 is placed 1 cm below and 1 cm lateral to the left outer canthus; E2 is 1 cm above and 1 cm lateral to the right outer canthus.
Chin EMG placement
Three chin electrodes are used: one midline 1 cm above the inferior mandible edge and two 2 cm below and 2 cm lateral to midline.
Leg EMG placement
Surface electrodes over the anterior tibialis muscles are placed 2-3 cm apart, with bilateral recording recommended to detect periodic limb movements.
Bio-calibration maneuvers
Bio-calibration documents eye movements, blinks, jaw clench, sniffs, leg movements, and breathing before lights out to verify signal integrity.
End-tidal CO2 normal
End-tidal carbon dioxide monitoring normally reads 35-45 mmHg; values outside this range may indicate hypoventilation or hyperventilation.
Modified ECG lead
A single modified ECG lead is placed on the chest to optimize R-wave detection and identify arrhythmias during polysomnography.
EEG filter settings
Standard EEG filters for polysomnography are a low-frequency filter of 0.3 Hz and a high-frequency filter of 35 Hz.
EMG filter settings
Chin EMG is typically recorded with a low-frequency filter of 10 Hz and a high-frequency filter of 100 Hz.
Arousal scoring rule
An arousal is an abrupt EEG frequency shift lasting at least 3 seconds; during REM it also requires a simultaneous chin EMG increase lasting at least 1 second.
Apnea definition
An apnea is a drop in airflow of at least 90% from baseline lasting at least 10 seconds, scored as obstructive, central, or mixed.
Hypopnea definition
A hypopnea is at least a 30% airflow reduction lasting 10 seconds or more with a 3% oxygen desaturation or an arousal.
Periodic limb movement rule
PLMS are scored when at least four consecutive leg movements last 0.5-10 seconds and are separated by 5-90 seconds.
N3 slow-wave threshold
Stage N3 requires slow waves of 0.5-2 Hz and greater than 75 µV peak-to-peak occupying at least 20% of the epoch.
REM chin EMG
REM sleep requires low chin EMG tone, low-amplitude mixed-frequency EEG, and rapid eye movements, with transient muscle twitches allowed.
Epoch length
Sleep is scored in 30-second epochs, and each epoch is assigned a single stage based on the majority pattern or specific transition rules.
Sleep onset definition
Sleep onset is the first epoch scored as any sleep stage, typically N1, N2, or REM, after lights out.
Stage W alpha rule
Stage W is scored when alpha rhythm occupies more than 50% of the epoch in an individual with occipital alpha.
N2 continuation rule
N2 continues until an arousal, transition to W, N3, or REM, or a major body movement followed by slow eye movements.
AHI severity categories
An apnea-hypopnea index of 5-15 is mild, 15-30 is moderate, and greater than 30 is severe obstructive sleep apnea.
Desaturation threshold
A respiratory desaturation is scored when SpO2 falls at least 3% from the preceding baseline value.
SOREMP definition
A sleep-onset REM period is REM sleep occurring within 15 minutes of sleep onset, often seen in narcolepsy and sleep deprivation.
PLM index formula
The periodic limb movement index equals the number of PLMS divided by hours of sleep, typically reported separately for adults and children.
CPAP titration goal
CPAP pressure is titrated to eliminate obstructive apneas, hypopneas, snoring, and desaturations during supine and REM sleep.
PAP adherence criterion
Common adherence criteria require CPAP use of at least 4 hours per night on at least 70% of nights.
ASV indication
Adaptive servo-ventilation is used for central sleep apnea, particularly Cheyne-Stokes respiration, by adjusting pressure support to stabilize ventilation.
Positional therapy
Positional therapy limits supine sleep using devices or alarms and is considered when apnea is substantially worse in the supine position.
Fall precautions
Patients at risk for falls require bed rails, assistance with ambulation, and prompt response to alarms during overnight polysomnography.
Hand hygiene standard
Hand hygiene before and after patient contact and between electrode applications reduces transmission of pathogens in the sleep laboratory.
HIPAA privacy rule
The HIPAA Privacy Rule protects individually identifiable health information and limits its use and disclosure without patient authorization.
Informed consent
Informed consent requires explaining the procedure, risks, benefits, alternatives, and the patient's right to withdraw before testing.

RPSGT study guide

Patient and Equipment Preparation for Polysomnographic Testing

Before the patient arrives

Preparation starts at scheduling. Confirm the indication, obtain informed consent, and collect a sleep diary (usually 1–2 weeks) plus a full medication list - sedatives, stimulants, opioids, and antidepressants all reshape the tracing (many antidepressants suppress REM and increase chin EMG tone). Ask about caffeine, alcohol, and nicotine, and screen for allergies (latex, adhesive). Instruct the patient to wash and dry the hair, avoid lotions or gels, keep usual sleep–wake habits, and follow the ordering provider's instructions about holding or continuing medications. Document everything; a study whose medication status is unknown may be uninterpretable.

Sensors and the electrode–skin interface

A routine montage includes EEG (F4-M1, C4-M1, O2-M1 with backups), EOG (E1-M2, E2-M1 - referenced to the opposite mastoid), chin EMG (submental, with redundancy), leg EMG (tibialis anterior), modified lead II ECG, nasal pressure and oronasal thermal airflow, thoracic and abdominal effort, pulse oximetry, snore, and body position. Skin preparation is the single biggest determinant of signal quality: mild abrasion plus degreasing, then measure impedance at each electrode. Values below about 5 kΩ are the working target; anything above roughly 10 kΩ should be redone before lights out.

Traps in questions

Distinguish disinfection from sterilization; distinguish DC (calibration) channel checks from physiologic calibration; remember impedance is measured after application, not before. A high-impedance electrode is a preparation problem, not a paste problem.

Rule of thumb

If a channel looks noisy or flat, re-check the electrode–skin interface first - prep and impedance explain more bad channels than amplifier settings do.

Polysomnographic Data Acquisition and Monitoring

Acquisition settings

The amplifier must be set so the signals of interest are faithfully captured. EEG is sampled at a minimum of 200 Hz and commonly 500 Hz; the Nyquist principle requires sampling at least twice the highest frequency you intend to record, which is why anti-aliasing filters exist. Typical filter settings: EEG and EOG low-frequency 0.3 Hz, high-frequency 35 Hz; EMG low 10 Hz, high 100 Hz; ECG low 0.3 Hz, high 70 Hz. EEG sensitivity is conventionally 7 µV/mm, with a 30-second page (time base 30 mm/s) so one screen equals one scoring epoch. Pulse oximetry averaging is typically 3 seconds - longer averaging falsely smooths desaturations.

Live monitoring

The technologist is not a passive observer. Verify each channel is physiologic before lights out (ask the patient to blink, swallow, breathe deeply, move a foot). Watch for sweating (slow rolling baseline), 60-Hz interference (ground or impedance problem - a notch filter hides but does not fix it), pulse and ECG artifact, and lost signals. Check the plethysmographic waveform, not just the saturation number: a bad waveform yields a bad SpO2. Note every intervention, position change, and oxygen adjustment with a time stamp so the scorer can reconcile the record.

Traps in questions

Changing sensitivity alters displayed amplitude, not the underlying frequency. Filtering out 60 Hz does not eliminate the source. A flat channel usually means a disconnected lead or a failed sensor, not a sleeping patient.

Rule of thumb

Time-stamped, real-time technologist notes are worth more than hours of retrospective video review - annotate as it happens.

Scoring, Interpretation, and Report Generation

Staging rules

Scoring uses 30-second epochs, assigned by the majority of the epoch. Wake: alpha rhythm over the occipital region for more than half the epoch (with eyes closed). N1: alpha replaced by low-amplitude mixed-frequency activity, slow eye movements, vertex sharp waves. N2: a K-complex or sleep spindle in the epoch or the preceding epoch, without an intervening arousal. N3: ≥20% of the epoch occupied by slow waves (0.5–2 Hz, >75 µV). R: low-amplitude mixed-frequency EEG, rapid eye movements, and the lowest chin EMG of the study.

Events

An arousal is an abrupt shift in EEG frequency lasting at least 3 seconds, preceded by at least 10 seconds of stable sleep; in REM it also requires a concurrent chin EMG increase. An apnea is a ≥90% reduction in airflow for ≥10 seconds; a hypopnea is a ≥30% reduction for ≥10 seconds with a ≥3% desaturation or an arousal. AHI is events per hour of sleep; RDI adds respiratory effort–related arousals. Periodic limb movements require at least four consecutive movements of 0.5–10 seconds with intervals of 5–90 seconds. Pediatric hypopnea criteria and obstructive apnea definitions differ from adult rules - read the age of the patient first.

Traps

Do not score by event count when the rule is epoch-based, and vice versa. Distinguish central from obstructive by effort, not by airflow. Remember desaturations lag the event by roughly 20–30 seconds.

Rule of thumb

When a desaturation appears, look backward about half a minute to find the respiratory event that caused it.

Therapeutic Interventions, Patient Safety, and Professional Standards

Positive airway pressure and titration

During a PAP titration the technologist raises pressure until apneas, hypopneas, hypoxemia, and arousals are eliminated, with the goal of covering supine REM sleep. A split-night study is generally appropriate when the diagnostic portion shows an AHI ≥40 in the first 2 hours, or 20–40 with clinical judgment, and at least 3 hours remain for titration. Bilevel PAP is used for CPAP intolerance or hypoventilation. Adaptive servoventilation is contraindicated in central sleep apnea with symptomatic heart failure and ejection fraction ≤45%. Supplemental oxygen is bled into the PAP circuit, never substituted for pressure. Other therapies include oral appliances, positional therapy, hypoglossal nerve stimulation, weight management, and CBT-I; MSLT for suspected narcolepsy follows an adequate overnight PSG.

Safety

Anticipate falls (bed rails, call bell, low bed), screen for latex allergy, and keep oxygen away from open flame and petroleum products. Follow standard precautions and equipment disinfection protocols, and know the emergency plan and location of emergency equipment.

Professional standards

Practice within scope, maintain licensure and credentialing, protect confidentiality, and document objectively. Interrater reliability targets - roughly 90% for staging and 80% for event scoring in many QA programs - reflect that scoring is a calibrated skill, not a personal opinion.

Traps

Questions often test the split-night hour thresholds, the ASV contraindication, and the rule that PAP is not started or changed during an MSLT.

Rule of thumb

Never declare an optimal pressure without evidence that supine REM sleep was actually treated.

RPSGT cheat sheet

Quick reference

Patient and Equipment Preparation for Polysomnographic Testing

  • AASM EEG montage: F4-M1, C4-M1, O2-M1 as primary; F3-M2, C3-M2, O1-M2 as backups; EOG E1-M2 and E2-M2; chin EMG with three electrodes.

  • Electrode impedance target is ≤5 kΩ; impedance checks are documented before recording and after any electrode repair.

  • E1 sits 1 cm below and 1 cm lateral to the left outer canthus; E2 sits 1 cm above and 1 cm lateral to the right outer canthus.

  • Chin EMG: one midline electrode 1 cm above the inferior edge of the mandible; two electrodes 2 cm below and 2 cm lateral to midline.

  • Leg EMG: surface electrodes 2-3 cm apart over the anterior tibialis; bilateral recording is recommended for PLM detection.

  • Bio-calibration includes eyes open, eyes closed, left/right gaze, blinks, jaw clench, sniff, leg movements, and breathing.

  • End-tidal CO2 normal range is 35-45 mmHg; transcutaneous CO2 is an alternative for pediatric or ventilation monitoring.

  • A single modified ECG lead on the chest is used to maximize R-wave detection and identify cardiac arrhythmias.

  • Oximetry sampling should provide a stable SpO2 waveform; signal averaging time affects detection of brief desaturations.

Quick reference

Polysomnographic Data Acquisition and Monitoring

  • EEG filter settings: low-frequency 0.3 Hz, high-frequency 35 Hz; EOG 0.3-35 Hz; chin EMG 10-100 Hz.

  • AASM recommends at least 200 Hz sampling for EEG, EOG, EMG, and ECG; airflow and oximetry can be sampled at lower rates.

  • Arousal: abrupt EEG frequency shift ≥3 seconds; in REM, a concurrent chin EMG increase ≥1 second is required.

  • Apnea: ≥90% airflow reduction for ≥10 seconds; obstructive if effort persists, central if effort is absent, mixed if both patterns occur.

  • Hypopnea: ≥30% airflow reduction for ≥10 seconds with ≥3% desaturation or an arousal.

  • PLMS: ≥4 consecutive leg movements, each 0.5-10 seconds, separated by 5-90 seconds.

  • Stage N3: slow waves 0.5-2 Hz and >75 µV occupying ≥20% of the epoch.

  • REM: low-amplitude mixed-frequency EEG, low chin EMG tone, and rapid eye movements; transient muscle activity may persist.

  • MSLT: four or five naps at 2-hour intervals; mean sleep latency ≤8 minutes is abnormal; SOREMP is REM within 15 minutes.

Quick reference

Scoring, Interpretation, and Report Generation

  • Scoring uses 30-second epochs; each epoch receives one stage based on the predominant pattern and transition rules.

  • Sleep onset is the first epoch of any sleep stage after lights out.

  • Stage W: alpha rhythm >50% of the epoch in patients with occipital alpha; without alpha, use eye blinks, reading eye movements, or high chin EMG.

  • N1: low-amplitude mixed-frequency EEG, slow eye movements, and vertex sharp waves; no sleep spindles or K-complexes.

  • N2 begins with a K-complex unassociated with arousal or a sleep spindle in the first half of the epoch or last half of the preceding epoch.

  • N3: ≥20% of the epoch occupied by slow waves of 0.5-2 Hz and >75 µV.

  • REM: low-amplitude mixed-frequency EEG, low chin EMG, and rapid eye movements; chin EMG may show brief twitches.

  • AHI = apneas plus hypopneas per hour of sleep; 5-15 is mild, 15-30 is moderate, and >30 is severe.

  • Report includes study indication, technical quality, sleep architecture, respiratory events, PLM index, ECG findings, and diagnostic impression.

Quick reference

Therapeutic Interventions, Patient Safety, and Professional Standards

  • CPAP titration endpoint: elimination of obstructive apneas, hypopneas, snoring, and desaturations in supine REM sleep.

  • PAP adherence is commonly defined as ≥4 hours per night on ≥70% of nights; Medicare uses a 30-day compliance window.

  • BiPAP is used when high CPAP pressure is poorly tolerated or ventilation is inadequate; ASV targets central sleep apnea and Cheyne-Stokes respiration.

  • Oxygen therapy is added when SpO2 remains <90% despite adequate PAP pressure.

  • Positional therapy is indicated when the AHI is at least twice as high in the supine position as in the nonsupine position.

  • Fall precautions include bed rails, call-light access, assisted ambulation, and alarm response.

  • Infection control: hand hygiene before and after contact and between patients; disinfect reusable electrodes per manufacturer instructions.

  • Professional standards include informed consent, HIPAA confidentiality, accurate documentation, and adherence to the BRPT code of ethics.

  • Emergencies: maintain suction, oxygen, bag-valve-mask, and AED access; activate EMS for chest pain, severe dyspnea, or unresponsiveness.

RPSGT key terms

Polysomnography

A continuous overnight recording of brain waves, eye movements, muscle tone, breathing, oxygen levels, and heart rhythm used to diagnose sleep disorders and to evaluate response to treatment.

Related: Biocalibration, Electrode impedance, Apnea-hypopnea index
Electrode impedance

The opposition to current flow at the skin-electrode interface, measured in ohms before recording begins; high values indicate poor contact and must be lowered by cleaning, light abrasion, or conductive paste.

Related: Biocalibration, Artifact, Differential amplifier
Biocalibration

A pre-recording check in which the patient performs instructed maneuvers such as eye blinks, jaw clenching, and leg lifts so the technologist can confirm each channel responds and is labeled correctly.

Related: Electrooculogram, Chin EMG, Anterior tibialis EMG
10-20 system

An international method of locating scalp electrodes by measuring from bony landmarks so that positions such as C3, C4, O1, and O2 are consistent from patient to patient and between recordings.

Related: Alpha rhythm, K-complex
Epworth Sleepiness Scale

A short questionnaire in which the patient rates the chance of dozing in eight everyday situations, producing a score from 0 to 24 that screens for excessive daytime sleepiness.

Related: Multiple sleep latency test, Sleep onset latency
Differential amplifier

A circuit that amplifies the voltage difference between two active inputs while canceling voltages common to both, which is why each polysomnographic channel records activity between an exploring and a reference electrode.

Related: Electrode impedance, Artifact, Sensitivity
Sampling rate

The number of times per second an analog signal is measured and stored digitally; it must be at least twice the highest frequency of interest to avoid distorting the waveform.

Related: Notch filter, Sensitivity
Notch filter

A narrow filter that removes signal at one specific frequency, usually 50 or 60 Hz, to reduce electrical mains interference without disturbing the surrounding EEG, EOG, and EMG frequencies.

Related: Artifact, Sampling rate
Time constant

A low-frequency filter setting that determines how quickly a slowly changing signal decays toward baseline; short values remove slow waves, while longer values preserve them for accurate EEG and respiratory recording.

Related: Sensitivity, Slow-wave sleep
Sensitivity

The amount of amplification applied to a signal, usually expressed as microvolts per millimeter of display height, which determines how large a waveform appears on the screen.

Related: Differential amplifier, Time constant
Pulse oximetry

A noninvasive method that uses light absorption through a finger or earlobe probe to estimate arterial oxygen saturation and pulse rate continuously throughout the night.

Related: Oxygen desaturation index, Artifact
Nasal pressure transducer

A cannula placed at the nostrils that senses airflow by converting pressure changes into an electrical signal; it detects hypopneas better than a thermistor because it is more sensitive.

Related: Thermistor, Hypopnea, Respiratory inductance plethysmography
Thermistor

A sensor placed at the nose and mouth that changes resistance with temperature, registering the difference between warm exhaled air and cooler inhaled air in order to mark airflow.

Related: Nasal pressure transducer, Obstructive apnea
Respiratory inductance plethysmography

A method using elastic belts around the chest and abdomen whose inductance changes with circumference, allowing estimation of respiratory effort and detection of paradoxical thoracoabdominal movement.

Related: Thermistor, Central apnea, Obstructive apnea
Chin EMG

Surface electrodes placed under the chin that record muscle tone, helping to identify wakefulness, the atonia of REM sleep, arousals, and movements during the night.

Related: REM latency, Arousal, Biocalibration
Anterior tibialis EMG

Surface electrodes placed on the lower legs that record muscle activity, allowing detection of periodic limb movements and other leg movements during sleep.

Related: Periodic limb movements of sleep, Arousal
Electrooculogram

Electrodes placed near the outer canthi of both eyes that record eye movements and help identify wakefulness, the slow eye movements of sleep onset, and the rapid eye movements of REM sleep.

Related: Biocalibration, REM latency
Artifact

Any recorded signal that comes from a source other than the intended biological activity, such as sweat, movement, electrical interference, or a loose electrode, and must be recognized before scoring.

Related: Electrode impedance, Notch filter, Differential amplifier
Arousal

An abrupt shift of EEG frequency during sleep lasting at least three seconds, with a concurrent rise in muscle tone required during REM, that fragments sleep even when the patient does not fully wake.

Related: Chin EMG, Respiratory effort-related arousal, Wake after sleep onset
Hypopnea

A reduction in airflow lasting at least ten seconds that is accompanied by a fall in oxygen saturation or by an arousal, scored only when the flow signal drops by the required percentage.

Related: Apnea-hypopnea index, Nasal pressure transducer, Oxygen desaturation index
Obstructive apnea

A complete pause in airflow lasting at least ten seconds while respiratory effort continues, showing that the upper airway is blocked rather than that the drive to breathe has stopped.

Related: Central apnea, Respiratory inductance plethysmography, Apnea-hypopnea index
Central apnea

A pause in airflow lasting at least ten seconds with no respiratory effort, indicating that the brain temporarily failed to signal the muscles that produce breathing.

Related: Obstructive apnea, Respiratory inductance plethysmography, Positive airway pressure titration
Apnea-hypopnea index

The number of apneas plus hypopneas divided by the hours of sleep, used to grade sleep apnea severity as mild, moderate, or severe and to guide treatment decisions.

Related: Hypopnea, Obstructive apnea, Oxygen desaturation index
Respiratory effort-related arousal

A run of increasing respiratory effort ending in an arousal after at least ten seconds that does not meet criteria for an apnea or hypopnea; scoring often requires a pressure-based flow signal or esophageal manometry.

Related: Arousal, Hypopnea
Oxygen desaturation index

The number of oxygen desaturations of at least three or four percent per hour of recording, an oximetry-based measure commonly used to screen for sleep-disordered breathing.

Related: Pulse oximetry, Apnea-hypopnea index
Sleep efficiency

Total sleep time divided by time in bed and multiplied by 100, expressing what percentage of the time spent in bed was actually spent asleep.

Related: Wake after sleep onset, Sleep onset latency
Sleep onset latency

The time from lights out to the first epoch scored as sleep, a key measure on the overnight study and the primary endpoint of the multiple sleep latency test.

Related: Multiple sleep latency test, Sleep efficiency
Wake after sleep onset

The total minutes spent awake after sleep has begun and before final awakening, reflecting sleep fragmentation and difficulty staying asleep through the night.

Related: Sleep efficiency, Arousal
REM latency

The time from sleep onset to the first epoch of REM sleep; a very short latency suggests narcolepsy or another condition in which REM sleep is disinhibited.

Related: Chin EMG, Multiple sleep latency test
K-complex

A sharply negative then positive EEG wave lasting at least half a second and maximal over frontal regions, marking stage N2 sleep and sometimes elicited by a sudden sound.

Related: Sleep spindle, Slow-wave sleep
Sleep spindle

A burst of 11 to 16 Hz activity lasting at least half a second, usually maximal over central regions, that helps define stage N2 sleep and reflects thalamocortical activity.

Related: K-complex, 10-20 system
Slow-wave sleep

Stage N3 sleep, defined by waves of 0.5 to 2 Hz and more than 75 microvolts occupying at least 20 percent of an epoch, and associated with deep, restorative sleep.

Related: K-complex, Time constant
Alpha rhythm

A background rhythm of 8 to 13 Hz seen over the occipital regions when the eyes are closed, whose presence and attenuation on eye opening help identify wakefulness.

Related: Sleep onset latency, 10-20 system
Periodic limb movements of sleep

Repetitive, stereotyped leg movements lasting 0.5 to 10 seconds that occur in series during sleep, scored from the anterior tibialis EMG and summarized by a movement index.

Related: Anterior tibialis EMG, Arousal
Positive airway pressure titration

A supervised study in which the delivered pressure is adjusted until apneas, hypopneas, and desaturations are eliminated while the patient remains comfortable and asleep in all body positions.

Related: Positive airway pressure adherence, Central apnea, Mask leak
Positive airway pressure adherence

The degree to which a patient uses positive airway pressure as prescribed, usually judged by average nightly hours of use and the percentage of nights the device was used.

Related: Positive airway pressure titration, Mask leak
Mask leak

Unintended escape of air at the interface between mask and face, which lowers delivered pressure, disturbs sleep, and can produce artifacts or unreliable airflow and pressure readings.

Related: Positive airway pressure titration, Artifact
Multiple sleep latency test

A daytime test of four or five nap opportunities spaced two hours apart that measures mean sleep latency and the presence of sleep-onset REM periods, used mainly to evaluate narcolepsy.

Related: Sleep onset latency, REM latency, Epworth Sleepiness Scale

RPSGT study plan

8 weeks · About 8 hours per week

Week 1

Patient and equipment preparation for polysomnographic testing

  • Label the 10–20 electrode sites on a partner or mannequin and state the cortical region underlying each of 8 standard derivations from memory

  • Measure and mark head sites within ±1 cm and verify impedance below 5 kΩ on every channel before recording

  • Perform a complete biocalibration sequence and document the expected appearance of EEG, EOG, chin EMG, snore, limb, airflow, effort, and oximetry signals

  • Deliver a 10-minute scripted patient orientation covering sensor attachment, test expectations, and responses to two common patient anxieties

Your checkpoint

Timed 45-minute mock hookup of a full PSG montage with a completed impedance log showing all channels ≤5 kΩ

Week 2

Patient and equipment preparation for polysomnographic testing & Polysomnographic data acquisition and monitoring

  • Position and secure airflow (thermistor and pressure transducer), effort belts, oximeter probe, snore microphone, and limb electrodes per published placement standards

  • Select and justify low-frequency, high-frequency, and notch filter settings for each channel type during a recording

  • Diagnose and correct five common recording artifacts by identifying the source, adjusting the setup, and re-verifying the signal

  • Fit, leak-test, and troubleshoot three PAP interfaces on a partner and record the leak and comfort findings

Your checkpoint

Artifact troubleshooting log covering 10 cases, each with cause, corrective action, and post-correction verification note

Week 3

Polysomnographic data acquisition and monitoring

  • Identify stage-defining waveforms (alpha rhythm, vertex sharp waves, K-complexes, sleep spindles, slow waves, rapid eye movements) across 50 practice epochs

  • Distinguish cerebral activity from sweat, pulse, muscle, and electrode-pop artifact in 20 mixed examples

  • Confirm sampling rate, sensitivity, and display time base for each signal and explain how each affects waveform readability

  • Write a technologist technical note for five events captured during acquisition

Your checkpoint

Annotated 50-epoch teaching set, self-scored, with ≥90% agreement against a verified answer key

Week 4

Polysomnographic data acquisition and monitoring & Scoring, interpretation, and report generation

  • Score 30 consecutive epochs by stage, applying stage-transition and major-body-movement rules

  • Apply the arousal rule (abrupt shift of ≥3 seconds with 10 seconds of stability required in REM) to a mixed epoch set

  • Score respiratory events using a consistent hypopnea definition and state which desaturation/arousal criterion was applied

  • Compute apnea-hypopnea index, arousal index, and sleep efficiency from a scored record

Your checkpoint

Fully staged 30-epoch record with three computed indices and ≥85% stage agreement with a reference scoring

Week 5

Scoring, interpretation, and report generation

  • Score periodic limb movements and calculate the limb movement index with arousal association

  • Identify Cheyne-Stokes respiration, hypoventilation, and periodic breathing patterns and select the correct scoring rule for each

  • Differentiate cardiac arrhythmia from ECG artifact when only a single modified lead is available

  • Draft a complete report containing staging table, event indices, technical comments, and a five-sentence clinical impression

Your checkpoint

Mock PSG report with staging summary, AHI, PLMI, arousal index, and impression, self-audited against a scoring checklist

Week 6

Scoring, interpretation, and report generation & Therapeutic interventions, patient safety, and professional standards

  • Score a five-nap MSLT, calculating mean sleep latency and counting sleep-onset REM periods under the applicable rules

  • Apply maintenance of wakefulness test scoring and state how its interpretation differs from the MSLT

  • Evaluate a titration record for pressure changes, leak, residual events, and positional effects, then recommend a pressure

  • Match complex breathing patterns to the appropriate therapy modality and justify the selection

Your checkpoint

Scored MSLT plus a titration worksheet ending in a written pressure recommendation with supporting rationale

Week 7

Therapeutic interventions, patient safety, and professional standards

  • Compare indications and contraindications for fixed CPAP, auto-titrating PAP, bilevel, and servo-ventilation in a written summary table

  • Sequence the response to a seizure, a cardiac event, a fire, and an oxygen hazard during an overnight study

  • Apply infection-control, hand-hygiene, and patient-confidentiality requirements to three realistic lab scenarios

  • Design a patient education script addressing mask fit, adherence tracking, and two barriers to long-term use

Your checkpoint

One-page emergency and safety reference card plus a 10-point adherence counseling script

Week 8

Patient and equipment preparation for polysomnographic testing & Polysomnographic data acquisition and monitoring & Scoring, interpretation, and report generation & Therapeutic interventions, patient safety, and professional standards

  • Complete two timed 100-question practice exams under test-day conditions

  • Classify every missed item by domain and subtopic to expose residual weak areas

  • Re-study the two lowest-scoring subtopics and re-answer the missed items untimed

  • Recite a one-page rules summary (staging, arousals, respiratory events, MSLT) from memory without notes

Your checkpoint

Error log with domain-level breakdown and a second practice exam score of ≥80%

Milestones

Week 2: Complete a full hookup and biocalibration unaided in under 60 minutes with all impedances ≤5 kΩ

Week 4: Achieve ≥85% stage-scoring agreement on a 30-epoch set and correctly compute AHI, arousal index, and sleep efficiency

Week 6: Independently score an MSLT and a titration study and state a defensible pressure recommendation

Week 8: Score ≥80% on a timed 100-question practice exam with an error log covering all four domains

RPSGT exam day

Your checklist

Government-issued photo ID with your signature

Bring the original (not a photocopy or photo on your phone). A driver's license, state ID, passport, or military ID is typical. The first and last name on the ID should match your registration exactly - confirm the accepted ID list and name-match rule with the testing vendor before exam day.

Appointment confirmation / authorization to test

Bring the confirmation email or letter from the testing vendor, printed or accessible offline. Format requirements vary by vendor - confirm with the provider whether a printed copy is required.

Verified testing center logistics

Confirm the exact address, parking or transit options, building security/check-in procedure, and the arrival time the vendor recommends (commonly 15–30 minutes before the appointment - verify your specific window).

Approved accommodations documentation, if applicable

If you were granted extra time, a separate room, or other accommodations, bring the approval letter and confirm in advance how the center will apply it. Accommodation requests generally must be approved well before test day - check the provider's deadline.

Plan for prohibited personal items

Phones, smartwatches, notes, and study materials are almost always barred from the testing room. Decide in advance where they will go (car, locker, or left at home). Confirm the vendor's storage and electronics policy.

Do not bring your own scratch paper, calculator, or notes

Testing centers typically supply any permitted materials and collect them afterward. Confirm what the vendor provides rather than assuming you may bring your own.

Comfort items that are usually allowed

Layers (test rooms are often cold), glasses if you wear contacts, and any medication you may need. Confirm the vendor's rules on food, drink, and medication in the testing room before relying on them.

Know the exam blueprint and your weak domains

Review the current content outline published by the credentialing board and note the 2–3 domains where your practice scores are lowest. Target those in the final 72 hours instead of re-reading everything.

Confirm exam length, time limit, and scoring method

Look up the current number of items, total seat time, whether breaks are built in, how the passing standard is set, and when results are released. These details change - verify them in the official candidate handbook rather than relying on secondhand information.

Protected sleep and a realistic arrival buffer

Plan to sleep at your normal time for the two nights before the exam and build in extra travel time. Fatigue reliably degrades performance on long multiple-choice exams.

Plan the day

72 hours out

Re-read the official candidate handbook for ID, arrival, prohibited-item, break, and scoring rules. Reconfirm your appointment date, time, and location. Do focused review of your two or three weakest blueprint domains and one timed practice set to rehearse pacing. Stop introducing brand-new material.

48–72 hours out

Check that your photo ID is current, undamaged, and that the name matches your registration. If anything mismatches, contact the credentialing board or testing vendor immediately - name discrepancies are a common cause of being turned away.

24 hours out

Light review only - skim your own summary notes and the equations or normal-value ranges you keep missing. Pack your ID, confirmation, and accommodation letter. Plan your route and backup route, check the weather, and set two alarms. Avoid heavy cramming and alcohol; go to bed at your usual time.

Morning of

Eat a normal breakfast, hydrate modestly, and avoid a large caffeine jump if you are not habituated to it. Leave with a buffer so a delay does not cost you the appointment. Do not study in the waiting area - it increases anxiety more than it adds knowledge.

At check-in

Present your ID and confirmation, store prohibited items as directed, and follow the proctor's sign-in and security steps. Ask the proctor to confirm how breaks work and whether the clock stops during them before you begin.

During the test

Do a quick scan of the interface and confirm the item count and remaining time. Answer every item - there is generally no penalty for guessing on this type of exam, but confirm that in the handbook. For long stems, read the question line first, then the scenario. Flag uncertain items and return to them if the platform allows review. Take any offered break to stand and reset rather than pushing through a mental slump.

Final minutes

Check for unanswered items and any flags you meant to revisit. Change an answer only when you can point to a specific reason - first-instinct answers are usually right. Submit deliberately and confirm the submission screen before leaving.

After the exam

Note how results are delivered (on-screen, by email, or posted to your account) and the timeline for official score reporting. Do not discuss specific exam content with others - most credentialing exams are covered by a confidentiality agreement.

Rules to check

  • Bring valid government-issued photo ID with your signature, and make sure the name matches your registration exactly. If you have recently changed your name, resolve the mismatch with the credentialing board before test day.

  • Arrive by the vendor's stated check-in time. Arriving late can result in being denied entry and forfeiting your fee - confirm the exact cutoff with the provider, as it varies.

  • Leave phones, smartwatches, and all study materials outside the testing room. Even having a device accessible during an unscheduled break can be treated as a testing irregularity.

  • Follow the vendor's break policy as explained at check-in. Do not assume the timer pauses during breaks - in many testing systems it does not, so verify first.

  • Treat exam content as confidential. Do not reproduce, discuss, or share specific questions, including in study groups or online forums.

  • Ask the proctor for clarification on logistics (bathroom, break, interface) but never for help interpreting a question. Proctors cannot explain content.

  • Understand the scoring model before you sit: this exam is reported as pass/fail against a set standard, not as a percentile against other candidates. Confirm the current passing standard and retake policy in the official handbook.

  • If a technical problem or distraction occurs during your exam, raise your hand immediately and ask the proctor to document it. Reporting after you leave is much harder to remedy.

RPSGT FAQ

How many RPSGT practice questions are available?

The practice set has 200 RPSGT questions. Each one includes the choices, the correct answer, and an explanation, and the set is free to read with no signup.

How many RPSGT flashcards are available?

The flashcard set has 32 RPSGT cards. Each card shows the term and its definition.

Which topics does the RPSGT study material cover?

The RPSGT study material has 4 sections, including Patient and Equipment Preparation for Polysomnographic Testing, Polysomnographic Data Acquisition and Monitoring, and Scoring, Interpretation, and Report Generation.

What format facts does the catalog list for the RPSGT exam?

The catalog lists these item types: multiple choice for the RPSGT exam.