CDR DTR Practice Test

CDR Dietetic Technician, Registered (DTR / NDTR) Examination

CDR DTR overview

  • 200 practice questions
  • 32 flashcards
  • 4 study guide topics
  • 36 key terms

What you'll study

  • Food and Nutrition Sciences
  • Nutrition Care for Individuals and Groups
  • Foodservice Systems
  • Management of Food and Nutrition Systems

The Nutrition and Dietetics Technician, Registered (NDTR) credential - commonly called the DTR - is the entry-level credential for technicians who work alongside registered dietitian nutritionists in clinical, community, and foodservice settings. NDTRs screen patients, collect nutrition data, implement care plans designed by an RDN, monitor food intake, and support foodservice operations, so the exam tests both nutrition science and the practical systems that deliver food to people. The examination is computer-delivered and multiple choice, organized around four broad content areas: food and nutrition sciences; nutrition care for individuals and groups; foodservice systems; and management of food and nutrition systems. Expect application questions rather than pure recall - scenarios asking what you would do first, which calculation applies, or why a procedure exists. Preparation works best as a staged build: master normal nutrition and metabolism, layer on medical nutrition therapy and the nutrition care process, then drill foodservice math (yields, conversions, production forecasting) and management concepts like staffing, budgeting, and quality improvement. Practice calculations until they are automatic, and rehearse the nutrition care process vocabulary. This page is an independent study resource and is not affiliated with, endorsed by, or connected to the Commission on Dietetic Registration or any credentialing body.

Common mistakes

When computing the percentage of calories from fat in a 24-hour recall, the candidate divides fat grams by total grams of food (or divides fat grams by total kcal) instead of converting fat grams to kilocalories first, and picks an answer that is roughly double or half the correct value.

'Percent fat' is memorized as a single step, and under time pressure the candidate reuses the percent-of-weight procedure from math class rather than remembering that fat yields 9 kcal/g while carbohydrate and protein yield 4 kcal/g.

What to do instead

Force the three-line setup on scratch paper every time: fat grams × 9 = fat kcal; carbohydrate grams × 4 + protein grams × 4 + fat kcal = total kcal; fat kcal ÷ total kcal = proportion. Sanity-check by noting that fat's kcal number should be more than twice its gram number.

On a nitrogen balance item, the candidate divides protein intake by 6.25 correctly but then subtracts only the measured urinary urea nitrogen, omitting the obligatory ~4 g/day of insensible and fecal nitrogen loss, so the client is called in positive balance when they are actually in negative balance.

The candidate remembers the 6.25 conversion factor because it is numeric and memorable, but treats the +4 g constant as an optional add-on rather than a fixed part of the equation.

What to do instead

Memorize the whole equation as one chunk, e.g., 'intake ÷ 6.25, minus urine urea N, minus 4.' Work three practice cases where the 4 g flips the sign of the balance, and check that any answer showing positive balance differs from the raw subtraction by about 4 g.

When calculating ideal or desirable body weight, the candidate applies 2.3 kg per inch starting from zero inches, or applies the male base weight to a female client, producing an IBW several kilograms off and propagating the error into the protein or fluid requirement.

The two-part structure of the formula (a fixed allowance for the first 5 feet plus a per-inch allowance) collapses into a single remembered number, and the sex-specific base weights (about 45.5 kg for women, 48.2 kg for men) are recalled as interchangeable.

What to do instead

Write the formula out in full each time before substituting: base weight for first 5 feet (sex-specific) + 2.3 kg for each inch over 5 feet. Anchor it with a memorized reference case (a 5-foot-0 female = 45.5 kg) and verify your answer is above that floor.

The candidate converts body weight in pounds to kilograms by multiplying by 2.2 instead of dividing, or drops the conversion entirely and multiplies a grams-per-kilogram protein or fluid requirement by the pound figure, then selects the largest, most 'generous' option on the list.

2.2 is remembered as 'the number you use for pounds and kilograms' without the direction being attached, and large computed answers feel clinically plausible, so nothing triggers a check.

What to do instead

Attach direction to the number verbally: 'kilograms are heavier, so the kilogram number is smaller.' Estimate first (a 180-lb client is a bit over 80 kg) and reject any answer that is not in that neighborhood before doing exact math.

The candidate identifies the correct nutrition diagnosis and then selects a nutrition intervention as the answer to a stem asking what should be done first, or selects an assessment activity for a stem that is describing monitoring and evaluation.

The candidate reads the clinical scenario and reacts to the disease state and the most familiar intervention, skipping the step of classifying which of the four Nutrition Care Process steps the question is actually testing.

What to do instead

Before looking at the options, write one word on scratch paper naming the NCP step the stem implies (assessment, diagnosis, intervention, monitoring/evaluation) and eliminate any option belonging to a different step. Treat 'first', 'initial', 'priority', and 'next' as explicit cues to the sequence.

In enteral feeding calculations, the candidate treats milliliters of water added for dilution as if it supplied calories, or forgets that free water from the formula counts toward the fluid goal and adds the full flush volume on top, overshooting the fluid prescription.

Water and formula are both measured in milliliters, so the units look interchangeable, and the formula's percent-free-water value is not top-of-mind during a timed exam.

What to do instead

Keep the two quantities physically separate on the page: one column for formula volume (the only source of kcal) and one column for water (dilution plus flushes, zero kcal). Subtract the formula's free water from the fluid goal before computing the flush.

The candidate answers a temperature-control item using 40 to 140 degrees Fahrenheit as the danger zone, or judges a food safe on temperature alone without considering how long it sat in that range.

Older study materials circulate widely and the round numbers 40 and 140 are easier to recall than the current 41 to 135 range, and time is treated as a separate topic rather than part of the same control.

What to do instead

Memorize the pair as one unit, '41 to 135 and two hours,' and rehearse it against cold holding (41 or below), hot holding (135 or above), and cooling (135 to 70 within two hours, then to 41 within four more). When an option cites a temperature, check whether the stem also gives a time you must use.

On a HACCP item, the candidate labels a cooking temperature as the critical control point itself, or orders verification before monitoring, or names a critical limit that is a monitoring procedure rather than a measurable boundary.

The seven principles are memorized as a list of words without a worked example, so the candidate cannot tell which noun belongs to which role when they appear in a scenario.

What to do instead

For each principle, hold one concrete anchor: hazard analysis, then CCP (the step), then critical limit (the number), then monitoring (who and how often), then corrective action, then verification, then recordkeeping. Practice by mapping a single cook-chill recipe step by step and labeling each item with its principle.

When computing staffing needs, the candidate calculates full-time equivalents by dividing total weekly labor hours by 8 instead of 40, or counts two 20-hour-per-week employees as 2.0 FTE, then chooses a headcount that is roughly five times too high or double the true FTE.

The candidate conflates 'hours in a workday' with 'hours in an FTE week' and treats headcount as interchangeable with FTE because both are described as 'staff.'

What to do instead

Define FTE once and reuse it: 1.0 FTE equals 40 paid hours per week. Convert every employee to hours, sum the hours, divide by 40, and then check whether the question asked for FTEs or for bodies scheduled, since those are different answers.

The candidate classifies salary, job security, and pleasant working conditions as motivators in a motivation-theory item, or reverses the order of needs in a hierarchy item, choosing the physiological need when the scenario describes a need for recognition.

Everyday intuition says pay motivates people, which conflicts with the two-factor theory the exam tests, and the candidate answers from intuition rather than from the model's own definitions.

What to do instead

Draw a two-column table from memory before the exam: motivators (achievement, recognition, responsibility, advancement, the work itself) versus hygiene factors (pay, policy, supervision, working conditions, security). For hierarchy items, identify the unmet need in the stem first and match it to the level rather than ranking needs abstractly.

Exam requirements can change. Confirm current details with the exam provider.

CDR DTR practice

200 questions. Each one lists the choices, the correct answer, and an explanation. With JavaScript, this list opens one question at a time. The checker at the top of this page saves progress in this browser when it is available.

  1. Question 1Food and Nutrition Sciences

    Using Atwater factors, approximately how many kilocalories are provided by 1 gram of carbohydrate?

    1. 4 kcal Correct answer.
    2. 7 kcal
    3. 9 kcal
    4. 2 kcal

    Explanation

    Carbohydrate and protein each yield about 4 kcal per gram, while fat yields about 9 kcal per gram and alcohol about 7 kcal per gram. These Atwater factors are used to estimate the energy content of foods and diets.

  2. Question 2Food and Nutrition Sciences

    Which group of vitamins is classified as fat-soluble?

    1. Vitamins A, C, E, and K
    2. Vitamin B6, folate, B12, and pantothenic acid
    3. Vitamin C, thiamin, riboflavin, and niacin
    4. Vitamins A, D, E, and K Correct answer.

    Explanation

    Vitamins A, D, E, and K are fat-soluble and are absorbed with dietary fat and stored in body tissues. The B-complex vitamins and vitamin C are water-soluble.

  3. Question 3Food and Nutrition Sciences

    Deficiency of vitamin C produces which condition?

    1. Beriberi
    2. Rickets
    3. Pellagra
    4. Scurvy Correct answer.

    Explanation

    Vitamin C is required for collagen synthesis, and deficiency causes scurvy with bleeding gums, poor wound healing, and petechiae. Rickets results from vitamin D deficiency, pellagra from niacin deficiency, and beriberi from thiamin deficiency.

  4. Question 4Food and Nutrition Sciences

    Which type of fiber is most responsible for lowering blood cholesterol by binding bile acids?

    1. Hemicellulose
    2. Insoluble cellulose
    3. Lignin
    4. Soluble pectin Correct answer.

    Explanation

    Soluble fibers such as pectin form gels and bind bile acids, increasing their excretion and lowering LDL cholesterol. Insoluble fibers such as cellulose and lignin mainly add bulk and promote laxation.

  5. Question 5Food and Nutrition Sciences

    The temperature danger zone in which bacteria multiply most rapidly in food is:

    1. 140°F to 165°F
    2. 41°F to 135°F Correct answer.
    3. 165°F to 212°F
    4. 0°F to 40°F

    Explanation

    Bacteria multiply most rapidly between 41°F and 135°F, so perishable foods should be kept out of this range. Below 41°F growth slows, and above 135°F most pathogens are inhibited or killed during cooking.

  6. Question 6Food and Nutrition Sciences

    Celiac disease is triggered by ingestion of which protein?

    1. Collagen
    2. Casein
    3. Gluten Correct answer.
    4. Albumin

    Explanation

    Celiac disease is an autoimmune enteropathy triggered by gluten proteins from wheat, barley, and rye. Casein, albumin, and collagen are not the trigger.

  7. Question 7Food and Nutrition Sciences

    A body mass index of 30 or greater in adults is classified as:

    1. Underweight
    2. Normal weight
    3. Overweight
    4. Obesity Correct answer.

    Explanation

    In adults, BMI 18.5–24.9 is normal, 25–29.9 is overweight, and 30 or greater is obesity. Values below 18.5 indicate underweight.

  8. Question 8Food and Nutrition Sciences

    In dysphagia diets, nectar-thick liquids are best described as:

    1. Slightly thickened and pourable Correct answer.
    2. Spoon-thick, holding their shape on a spoon
    3. Thin and watery, resembling regular liquids
    4. Solid foods only

    Explanation

    Nectar-thick liquids are mildly thickened so they pour slowly and are easier to control orally than thin liquids. Thin liquids are regular consistency, spoon-thick liquids are much thicker, and solid foods are not liquids.

  9. Question 9Food and Nutrition Sciences

    Which substance enhances nonheme iron absorption when consumed with a meal?

    1. Calcium
    2. Vitamin C Correct answer.
    3. Phytates
    4. Tannins in tea

    Explanation

    Vitamin C reduces ferric iron to ferrous iron and forms a soluble chelate, enhancing nonheme iron absorption. Calcium, tannins, and phytates inhibit absorption.

  10. Question 10Food and Nutrition Sciences

    Which factor most reduces calcium absorption?

    1. Lactose
    2. Vitamin D
    3. Dietary protein
    4. Oxalic acid Correct answer.

    Explanation

    Oxalic acid binds calcium to form insoluble calcium oxalate, reducing absorption; spinach and rhubarb are high in oxalate. Vitamin D, lactose, and adequate protein do not reduce calcium absorption.

  11. Question 11Food and Nutrition Sciences

    The glycemic index of a food is determined primarily by:

    1. Its fiber content alone
    2. Its protein content
    3. Its fat content
    4. The type and amount of carbohydrate Correct answer.

    Explanation

    The glycemic index compares the blood glucose response to a fixed amount of available carbohydrate, so the type of carbohydrate and its rate of digestion are key. Fat, protein, and fiber can modify the response but are not the basis of the index.

  12. Question 12Food and Nutrition Sciences

    Combining rice and beans improves protein quality because:

    1. Rice supplies all essential amino acids in adequate amounts
    2. Both foods are high in saturated fat
    3. They increase dietary fiber
    4. Beans supply amino acids that complement rice Correct answer.

    Explanation

    Cereals such as rice are low in lysine, while legumes are rich in lysine but low in methionine; eaten together they provide a more complete amino acid pattern. The combination does not depend on fat or fiber content.

  13. Question 13Food and Nutrition Sciences

    The first principle of HACCP is to:

    1. Monitor critical control points
    2. Establish critical limits
    3. Conduct a hazard analysis Correct answer.
    4. Verify procedures

    Explanation

    HACCP begins with hazard analysis to identify biological, chemical, and physical hazards, followed by determining critical control points, limits, monitoring, corrective actions, verification, and record keeping.

  14. Question 14Food and Nutrition Sciences

    On the Exchange Lists, one carbohydrate exchange provides approximately how many grams of carbohydrate?

    1. 10 g
    2. 15 g Correct answer.
    3. 25 g
    4. 20 g

    Explanation

    One carbohydrate exchange contains about 15 g of carbohydrate, 3 g of protein, and 80 kcal. This value is used for carbohydrate counting and meal planning.

  15. Question 15Food and Nutrition Sciences

    A food that provides 20% of the Daily Value for calcium per reference amount is considered:

    1. Low in calcium
    2. High in calcium Correct answer.
    3. A good source of calcium
    4. Calorie-free

    Explanation

    A food providing 20% or more of the Daily Value per reference amount is considered high in that nutrient; 10–19% is a good source. Low means 5% or less.

  16. Question 16Food and Nutrition Sciences

    Which hormone increases water reabsorption by the kidneys?

    1. Insulin
    2. Atrial natriuretic peptide
    3. Antidiuretic hormone Correct answer.
    4. Aldosterone

    Explanation

    Antidiuretic hormone increases water permeability in the renal collecting ducts, reducing urine output. Aldosterone promotes sodium reabsorption, atrial natriuretic peptide promotes sodium and water excretion, and insulin regulates glucose.

  17. Question 17Food and Nutrition Sciences

    Which factor tends to increase basal metabolic rate?

    1. Female sex
    2. Aging
    3. Fasting
    4. Lean body mass Correct answer.

    Explanation

    Lean body mass is metabolically active and raises basal metabolic rate, so muscular individuals have higher rates. Aging, fasting, and female sex are associated with lower basal metabolic rate.

  18. Question 18Food and Nutrition Sciences

    The DASH eating plan is primarily designed to:

    1. Treat kidney stones
    2. Increase iron absorption
    3. Lower blood pressure Correct answer.
    4. Increase saturated fat intake

    Explanation

    DASH emphasizes fruits, vegetables, low-fat dairy, and reduced sodium to lower blood pressure. It is not designed to treat kidney stones or increase iron absorption, and it limits saturated fat.

  19. Question 19Food and Nutrition Sciences

    For adult women, a waist circumference indicating increased cardiometabolic risk is greater than:

    1. 35 inches Correct answer.
    2. 25 inches
    3. 30 inches
    4. 45 inches

    Explanation

    Waist circumference above 35 inches in women and 40 inches in men indicates increased cardiometabolic risk. These cutoffs reflect abdominal adiposity independent of BMI.

  20. Question 20Food and Nutrition Sciences

    Absorption of vitamin B12 requires:

    1. Vitamin C
    2. Bile salts
    3. Intrinsic factor Correct answer.
    4. Pancreatic lipase

    Explanation

    Vitamin B12 requires intrinsic factor secreted by gastric parietal cells for absorption in the terminal ileum. Bile salts and pancreatic lipase aid fat digestion, and vitamin C aids iron absorption.

  21. Question 21Food and Nutrition Sciences

    The primary nutrition therapy for phenylketonuria is:

    1. Phenylalanine restriction with tyrosine supplementation Correct answer.
    2. A strict gluten-free diet
    3. A low-fat, high-carbohydrate diet
    4. Unrestricted protein intake with phenylalanine supplements

    Explanation

    PKU is a deficiency of phenylalanine hydroxylase, so phenylalanine must be restricted while tyrosine, the product of that enzyme, becomes conditionally essential and must be supplied. Unrestricted protein would worsen phenylalanine accumulation.

  22. Question 22Food and Nutrition Sciences

    Refeeding syndrome is characterized by which electrolyte shift after reintroduction of nutrition?

    1. Hypophosphatemia Correct answer.
    2. Hyperkalemia
    3. Hypercalcemia
    4. Hypernatremia

    Explanation

    Refeeding syndrome causes intracellular shifts of phosphate, potassium, and magnesium after carbohydrate reintroduction, with hypophosphatemia being characteristic. It can cause cardiac and respiratory failure if not monitored.

  23. Question 23Food and Nutrition Sciences

    A patient with a major burn injury is most likely to be in:

    1. Zero protein turnover
    2. Nitrogen equilibrium
    3. Negative nitrogen balance Correct answer.
    4. Positive nitrogen balance

    Explanation

    Catabolic stress such as burns increases protein breakdown and nitrogen excretion, producing negative nitrogen balance. Positive balance occurs in growth and recovery, and equilibrium occurs in healthy adults on adequate intake.

  24. Question 24Food and Nutrition Sciences

    Which complication is most associated with bolus enteral feedings delivered too rapidly?

    1. Constipation
    2. Hyperglycemia
    3. Dumping syndrome Correct answer.
    4. Dehydration

    Explanation

    Rapid bolus feeding can overwhelm digestive capacity and cause dumping syndrome with cramping, diarrhea, and hypotension. Slower drip or pump feeding reduces this risk.

  25. Question 25Food and Nutrition Sciences

    Essential fatty acid deficiency is best prevented by providing:

    1. Linoleic and alpha-linolenic acids Correct answer.
    2. Oleic and palmitoleic acids from adipose tissue
    3. Butyric and caproic acids
    4. Stearic and arachidic acids

    Explanation

    Linoleic acid (omega-6) and alpha-linolenic acid (omega-3) are essential because humans lack the desaturases to synthesize them. Oleic, stearic, and short-chain fatty acids can be synthesized or are not essential.

  26. Question 26Food and Nutrition Sciences

    How many kilocalories are provided by 1 gram of carbohydrate?

    1. 2
    2. 9
    3. 7
    4. 4 Correct answer.

    Explanation

    Carbohydrate and protein each provide about 4 kcal per gram, while fat provides 9 kcal per gram. Alcohol provides 7 kcal per gram but is not a nutrient. These factors are used in food energy calculations.

  27. Question 27Food and Nutrition Sciences

    Which vitamin is classified as fat-soluble?

    1. Vitamin D Correct answer.
    2. Folate
    3. Vitamin B12
    4. Vitamin C

    Explanation

    Vitamins A, D, E, and K are fat-soluble and require bile and micelles for absorption. Vitamin C and the B-complex vitamins, including B12 and folate, are water-soluble.

  28. Question 28Food and Nutrition Sciences

    The primary role of dietary protein is to:

    1. Carry fat-soluble vitamins in the blood
    2. Supply energy for immediate use
    3. Provide amino acids for tissue repair Correct answer.
    4. Serve as the main storage form of energy

    Explanation

    Protein supplies amino acids that are used to synthesize body proteins, enzymes, and other nitrogen-containing compounds. Energy production is a secondary role when carbohydrate and fat are insufficient. Fat, not protein, is the main storage form of energy.

  29. Question 29Food and Nutrition Sciences

    Water accounts for approximately what percentage of body weight in a healthy adult?

    1. 80% to 90%
    2. 20% to 30%
    3. 60% to 70% Correct answer.
    4. 40% to 50%

    Explanation

    Total body water is about 60% of body weight in adult men and about 50% to 55% in adult women. Lean tissue contains more water than adipose tissue, so body composition affects the percentage. Values outside this range suggest severe dehydration or overhydration.

  30. Question 30Food and Nutrition Sciences

    Which mineral is essential for the synthesis of thyroid hormones?

    1. Zinc
    2. Iodine Correct answer.
    3. Iron
    4. Calcium

    Explanation

    Iodine is incorporated into thyroxine (T4) and triiodothyronine (T3) in the thyroid gland. Deficiency leads to goiter and impaired growth and development. Iron, calcium, and zinc have other primary functions.

  31. Question 31Food and Nutrition Sciences

    For a woman with a normal prepregnancy BMI, the recommended total weight gain during pregnancy is:

    1. 37 to 54 lb
    2. 11 to 20 lb
    3. 5 to 10 lb
    4. 25 to 35 lb Correct answer.

    Explanation

    The Institute of Medicine recommends 25 to 35 lb total gain for women with a normal prepregnancy BMI. Underweight women are advised to gain 28 to 40 lb, and obese women 11 to 20 lb. Inadequate or excessive gain increases maternal and fetal risks.

  32. Question 32Food and Nutrition Sciences

    The temperature danger zone for bacterial growth in food is:

    1. 140°F to 200°F
    2. 0°F to 40°F
    3. 40°F to 140°F Correct answer.
    4. 200°F to 212°F

    Explanation

    Bacteria multiply most rapidly between 40°F and 140°F, so perishable foods should be kept outside this range. Refrigeration below 40°F slows growth, and holding hot foods above 140°F limits it. The range applies to food safety practice.

  33. Question 33Food and Nutrition Sciences

    Which nutrient is added to enriched grain products to help prevent neural tube defects?

    1. Vitamin E
    2. Calcium
    3. Folic acid Correct answer.
    4. Vitamin B12

    Explanation

    Folic acid is added to enriched flour and other grain products to reduce the risk of neural tube defects. Fortification programs increased folate intake in the population. Vitamin B12, vitamin E, and calcium are not added for this purpose.

  34. Question 34Food and Nutrition Sciences

    Soluble fiber lowers blood cholesterol primarily by:

    1. Increasing fecal excretion of bile acids Correct answer.
    2. Binding to dietary fat in the stomach
    3. Blocking cholesterol synthesis in the liver
    4. Stimulating pancreatic lipase release

    Explanation

    Soluble fiber binds bile acids in the intestine and increases their excretion. The liver then uses cholesterol to synthesize replacement bile acids, lowering serum LDL cholesterol. This is why oats, barley, and psyllium are recommended for cholesterol management.

  35. Question 35Food and Nutrition Sciences

    A deficiency of vitamin C results in which condition?

    1. Pellagra
    2. Scurvy Correct answer.
    3. Beriberi
    4. Rickets

    Explanation

    Vitamin C is required for collagen synthesis, and deficiency causes scurvy with bleeding gums, poor wound healing, and petechiae. Beriberi is caused by thiamin deficiency, pellagra by niacin deficiency, and rickets by vitamin D deficiency.

  36. Question 36Food and Nutrition Sciences

    The limiting amino acid in most legumes is:

    1. Lysine
    2. Methionine Correct answer.
    3. Tryptophan
    4. Leucine

    Explanation

    Legumes are typically low in methionine and cysteine but rich in lysine. Cereal grains are the opposite, which is why combining legumes with grains improves protein quality. The limiting amino acid is the one present in the shortest supply relative to needs.

  37. Question 37Food and Nutrition Sciences

    Which laboratory test is the most specific indicator of iron stores?

    1. Hemoglobin
    2. Mean corpuscular volume
    3. Hematocrit
    4. Serum ferritin Correct answer.

    Explanation

    Serum ferritin reflects the amount of iron stored in the body and falls early in iron depletion. Hemoglobin and hematocrit indicate anemia but not the size of iron stores. Mean corpuscular volume changes later as iron deficiency progresses.

  38. Question 38Food and Nutrition Sciences

    Liver glycogen is important because it:

    1. Maintains blood glucose between meals Correct answer.
    2. Synthesizes essential amino acids
    3. Provides a direct energy source for muscle contraction
    4. Stores fat for long-term energy

    Explanation

    The liver breaks down glycogen to release glucose into the blood, helping maintain blood glucose during fasting. Muscle glycogen is used locally for muscle contraction and does not directly raise blood glucose. Fat is stored in adipose tissue, and essential amino acids must come from the diet.

  39. Question 39Food and Nutrition Sciences

    Bile aids fat digestion by:

    1. Absorbing fatty acids into enterocytes
    2. Emulsifying fats into smaller droplets Correct answer.
    3. Hydrolyzing triglycerides into fatty acids
    4. Synthesizing chylomicrons

    Explanation

    Bile salts emulsify fat, breaking large fat globules into smaller droplets and increasing the surface area for pancreatic lipase. Lipase hydrolyzes triglycerides, and absorbed fatty acids are packaged into chylomicrons inside enterocytes. Bile itself does not hydrolyze fat.

  40. Question 40Food and Nutrition Sciences

    Edema is a characteristic feature of which form of protein-energy malnutrition?

    1. Marasmus
    2. Stunting
    3. Cachexia
    4. Kwashiorkor Correct answer.

    Explanation

    Kwashiorkor is a protein-deficient form of malnutrition characterized by edema, fatty liver, and skin changes. Marasmus results from severe overall energy and protein deficiency and causes wasting without edema. Stunting is chronic linear growth failure.

  41. Question 41Food and Nutrition Sciences

    The Mediterranean diet is characterized by a high intake of:

    1. Olive oil and plant foods Correct answer.
    2. Processed foods and sugar
    3. Full-fat dairy and eggs
    4. Red meat and butter

    Explanation

    The Mediterranean pattern emphasizes olive oil, fruits, vegetables, legumes, whole grains, fish, and nuts. It limits red meat, butter, and processed foods. This pattern is associated with lower cardiovascular risk.

  42. Question 42Food and Nutrition Sciences

    A food labeled 'reduced fat' must contain at least:

    1. 50% less fat than the reference food
    2. 33% less fat than the reference food
    3. No fat at all
    4. 25% less fat than the reference food Correct answer.

    Explanation

    The term 'reduced' means at least 25% less of the specified nutrient than the reference food. 'Low fat' means 3 g or less per reference amount, and 'fat free' means less than 0.5 g per reference amount. The 25% rule applies to other 'reduced' claims as well.

  43. Question 43Food and Nutrition Sciences

    Which vitamin is synthesized by bacteria in the human colon?

    1. Vitamin K Correct answer.
    2. Vitamin D
    3. Vitamin C
    4. Vitamin B12

    Explanation

    Gut bacteria synthesize vitamin K, which contributes to the body's vitamin K status along with dietary leafy greens. Vitamin C and B12 must come from the diet, and vitamin D is made in the skin or obtained from food. Colonic synthesis alone is not sufficient to meet all needs.

  44. Question 44Food and Nutrition Sciences

    Lactose intolerance results from a deficiency of which enzyme?

    1. Amylase
    2. Maltase
    3. Sucrase
    4. Lactase Correct answer.

    Explanation

    Lactase, located in the brush border of the small intestine, hydrolyzes lactose into glucose and galactose. When lactase activity is low, undigested lactose is fermented by colonic bacteria, causing gas, bloating, and diarrhea. Amylase, maltase, and sucrase digest other carbohydrates.

  45. Question 45Food and Nutrition Sciences

    Hyperglycemia during total parenteral nutrition is best managed by:

    1. Stopping all nutrition support
    2. Adjusting dextrose or adding insulin Correct answer.
    3. Increasing the lipid emulsion rate
    4. Administering a bolus of normal saline

    Explanation

    Hyperglycemia in TPN often reflects a dextrose infusion rate that exceeds the patient's tolerance. Reducing the dextrose concentration or adding insulin to the bag or via a separate infusion is appropriate. Lipids do not directly treat hyperglycemia, and stopping nutrition abruptly can cause rebound hypoglycemia.

  46. Question 46Food and Nutrition Sciences

    Maple syrup urine disease requires restriction of which amino acids?

    1. Lysine and arginine
    2. Phenylalanine and tyrosine metabolites
    3. Leucine, isoleucine, valine Correct answer.
    4. Methionine and cysteine

    Explanation

    Maple syrup urine disease is a defect in branched-chain alpha-keto acid dehydrogenase, causing accumulation of leucine, isoleucine, and valine. Treatment restricts these amino acids while meeting other protein needs. Phenylalanine restriction is used for phenylketonuria, not MSUD.

  47. Question 47Food and Nutrition Sciences

    Carnitine is required for:

    1. Synthesis of ketone bodies in the liver
    2. Transport of long-chain fatty acids Correct answer.
    3. Absorption of fat-soluble vitamins
    4. Conversion of glucose to glycogen

    Explanation

    Carnitine shuttles long-chain fatty acids across the inner mitochondrial membrane for beta-oxidation. Without carnitine, long-chain fatty acid oxidation is impaired. Ketone body synthesis, glycogenesis, and fat-soluble vitamin absorption do not require carnitine as a primary cofactor.

  48. Question 48Food and Nutrition Sciences

    Vitamin B6 is required for the conversion of:

    1. Beta-carotene to vitamin A
    2. Homocysteine to methionine
    3. Cholesterol to vitamin D
    4. Tryptophan to niacin Correct answer.

    Explanation

    Vitamin B6 is a coenzyme for kynureninase in the tryptophan-to-niacin pathway. Beta-carotene conversion requires vitamin A enzymes, vitamin D synthesis requires UV light, and homocysteine remethylation requires vitamin B12 and folate. B6 also participates in transamination and heme synthesis.

  49. Question 49Food and Nutrition Sciences

    Wernicke-Korsakoff syndrome is most commonly associated with a deficiency of:

    1. Riboflavin
    2. Niacin
    3. Thiamin Correct answer.
    4. Vitamin B6

    Explanation

    Thiamin deficiency, often seen in chronic alcohol use, causes Wernicke encephalopathy and Korsakoff psychosis. Thiamin is a coenzyme for glucose metabolism, and deficiency impairs brain energy use. Niacin, riboflavin, and vitamin B6 deficiencies cause different syndromes.

  50. Question 50Food and Nutrition Sciences

    A patient taking warfarin should maintain a consistent intake of which vitamin?

    1. Folate
    2. Vitamin C
    3. Vitamin K Correct answer.
    4. Vitamin B12

    Explanation

    Warfarin inhibits vitamin K epoxide reductase, reducing synthesis of vitamin K-dependent clotting factors. A consistent dietary intake of vitamin K prevents large swings in the international normalized ratio. Patients should not eliminate vitamin K but keep intake stable.

  51. Question 51Nutrition Care for Individuals and Groups

    An adult client has a body mass index (BMI) of 32.0 kg/m². How is this BMI classified?

    1. Overweight
    2. Normal weight
    3. Obesity class I Correct answer.
    4. Obesity class II

    Explanation

    A BMI of 30.0 to 34.9 kg/m² defines class I obesity. Class II begins at 35.0 and class III at 40.0.

  52. Question 52Nutrition Care for Individuals and Groups

    Which three elements make up a PES statement used in the nutrition diagnosis step?

    1. Plan, evaluation, screening
    2. Problem, etiology, signs Correct answer.
    3. Problem, energy, status
    4. Protein, energy, sodium

    Explanation

    A PES statement links the nutrition problem, its etiology (cause), and the defining signs and symptoms that support the problem. This structure keeps the diagnosis specific and measurable.

  53. Question 53Nutrition Care for Individuals and Groups

    What is the main limitation of the 24-hour dietary recall as an assessment method?

    1. It depends on the client's memory Correct answer.
    2. It is collected over three days
    3. It requires weighing all foods
    4. It records intake as foods are eaten

    Explanation

    A 24-hour recall asks the client to remember everything eaten in the past day, so accuracy depends on memory and portion estimation. Intake may also be atypical for that day.

  54. Question 54Nutrition Care for Individuals and Groups

    Which step comes first in the Nutrition Care Process?

    1. Nutrition diagnosis
    2. Nutrition intervention
    3. Nutrition assessment Correct answer.
    4. Nutrition monitoring and evaluation

    Explanation

    Nutrition assessment is the first step and gathers anthropometric, biochemical, clinical, and dietary data. Those data are then used to formulate the nutrition diagnosis.

  55. Question 55Nutrition Care for Individuals and Groups

    Which menu items are appropriate on a clear liquid diet?

    1. Oatmeal with milk
    2. Cream soup and crackers
    3. Scrambled eggs and toast
    4. Broth, gelatin, and clear juice Correct answer.

    Explanation

    Clear liquids are transparent at room temperature and leave little residue in the gastrointestinal tract. Broth, plain gelatin, and clear juices meet this definition.

  56. Question 56Nutrition Care for Individuals and Groups

    Hemoglobin A1c reflects a client's average blood glucose over which time frame?

    1. The previous 24 hours
    2. The previous 6 months
    3. The previous 7 days
    4. The previous 2 to 3 months Correct answer.

    Explanation

    HbA1c measures glucose bound to hemoglobin over the lifespan of red blood cells, roughly 2 to 3 months. It is therefore used to track long-term glycemic control rather than day-to-day changes.

  57. Question 57Nutrition Care for Individuals and Groups

    In carbohydrate counting, one carbohydrate choice provides how many grams of carbohydrate?

    1. 45 grams
    2. 30 grams
    3. 5 grams
    4. 15 grams Correct answer.

    Explanation

    One carbohydrate choice or exchange equals 15 grams of carbohydrate. Clients count choices across meals to match insulin or meet a prescribed carbohydrate budget.

  58. Question 58Nutrition Care for Individuals and Groups

    At what bed elevation should a client be positioned during and shortly after an enteral tube feeding?

    1. Sitting upright only at mealtimes
    2. Flat in bed
    3. Ten degrees of elevation
    4. Thirty to forty-five degrees Correct answer.

    Explanation

    Elevating the head of the bed 30 to 45 degrees during and after feeding reduces gastroesophageal reflux and aspiration risk. This position is maintained for about 30 minutes after an intermittent feeding.

  59. Question 59Nutrition Care for Individuals and Groups

    A stable adult weighing 70 kg needs an estimated 25 to 30 kcal/kg/day. What daily energy range does this provide?

    1. 1,050 to 1,400 kcal
    2. 1,400 to 1,750 kcal
    3. 1,750 to 2,100 kcal Correct answer.
    4. 2,450 to 2,800 kcal

    Explanation

    Multiply the weight by the kilocalorie factor: 70 kg × 25 = 1,750 kcal and 70 kg × 30 = 2,100 kcal. This range suits a stable adult without major stress or weight goals.

  60. Question 60Nutrition Care for Individuals and Groups

    A client with a stage 3 pressure injury has adequate energy intake. What protein intake is recommended to support wound healing?

    1. 1.25 to 1.5 g/kg/day Correct answer.
    2. 0.4 to 0.5 g/kg/day
    3. 0.6 to 0.8 g/kg/day
    4. 2.5 to 3.0 g/kg/day

    Explanation

    Pressure injuries raise protein needs to about 1.25 to 1.5 g/kg/day to support collagen synthesis and tissue repair. Intake should be reassessed as the wound heals.

  61. Question 61Nutrition Care for Individuals and Groups

    An 18-month-old's weight-for-age plots at the 3rd percentile on the growth chart. What is the best interpretation?

    1. Cannot be judged without BMI
    2. Above expected for age
    3. Below expected for age Correct answer.
    4. Average for age

    Explanation

    A weight-for-age at the 3rd percentile falls below the expected range and signals possible undernutrition, so further assessment of intake, growth trend, and health status is needed. Growth is judged by serial measurements, not a single BMI.

  62. Question 62Nutrition Care for Individuals and Groups

    Which pattern of intake is characteristic of the DASH eating plan?

    1. Very low carbohydrate intake
    2. High sodium and low potassium
    3. High saturated fat
    4. Fruits, vegetables, and low-fat dairy Correct answer.

    Explanation

    DASH emphasizes fruits, vegetables, whole grains, and low-fat dairy while limiting sodium, saturated fat, and sweets. The pattern is rich in potassium, calcium, and magnesium.

  63. Question 63Nutrition Care for Individuals and Groups

    Which counseling technique is characteristic of motivational interviewing?

    1. Confronting the client about poor choices
    2. Open-ended questions and reflective listening Correct answer.
    3. Giving detailed instructions without discussion
    4. Setting goals for the client without input

    Explanation

    Motivational interviewing uses open-ended questions, affirmations, reflections, and summaries to help clients articulate their own reasons for change. The counselor avoids confrontation and supports client-chosen goals.

  64. Question 64Nutrition Care for Individuals and Groups

    Why are thin liquids often restricted for a client with dysphagia?

    1. They reduce the swallowing reflex
    2. They provide too many calories
    3. Hard to control and easily aspirated Correct answer.
    4. They cause constipation

    Explanation

    Thin liquids flow rapidly and are difficult for a client with dysphagia to control in the mouth, so they are easily aspirated. Thickening slows the bolus and gives the swallow more time.

  65. Question 65Nutrition Care for Individuals and Groups

    Which statement describes a food allergy rather than a food intolerance?

    1. It always causes digestive upset only
    2. It is caused by an enzyme deficiency
    3. It is an immune response that can be rapid Correct answer.
    4. It never requires avoiding the food

    Explanation

    Food allergy is an immune-mediated reaction that can occur within minutes of ingestion and may involve skin, respiratory, or gastrointestinal symptoms. Intolerance is generally non-immune and often dose-related.

  66. Question 66Nutrition Care for Individuals and Groups

    A client takes in 15 g of nitrogen and excretes 18 g in a 24-hour period. What does this indicate?

    1. Nitrogen retention
    2. Zero balance
    3. Negative nitrogen balance Correct answer.
    4. Positive nitrogen balance

    Explanation

    Nitrogen balance equals nitrogen intake minus nitrogen losses. When losses exceed intake, the client is in negative nitrogen balance, which suggests catabolism or inadequate protein intake.

  67. Question 67Nutrition Care for Individuals and Groups

    A client with chronic kidney disease has hyperkalemia. Which food should the dietetic technician advise limiting?

    1. Banana Correct answer.
    2. White bread
    3. Apple
    4. White rice

    Explanation

    Bananas are high in potassium, so they are among the foods limited when serum potassium is elevated. Lower-potassium choices include apples, white rice, and white bread.

  68. Question 68Nutrition Care for Individuals and Groups

    Which nutrient is most likely to require a fortified food or supplement in a vegan eating pattern?

    1. Vitamin C
    2. Vitamin B12 Correct answer.
    3. Folate
    4. Fiber

    Explanation

    Vitamin B12 occurs naturally almost exclusively in animal foods, so vegans need fortified plant foods or a supplement. Plant foods are generally reliable sources of vitamin C, fiber, and folate.

  69. Question 69Nutrition Care for Individuals and Groups

    What daily folate intake is recommended during pregnancy?

    1. 600 micrograms DFE daily Correct answer.
    2. 150 micrograms DFE daily
    3. 1,200 micrograms DFE daily
    4. 4,000 micrograms DFE daily

    Explanation

    The RDA for folate during pregnancy is 600 micrograms DFE per day to support fetal neural tube development. A 4,000 microgram supplement is reserved for clients at high risk of a neural tube defect under medical guidance.

  70. Question 70Nutrition Care for Individuals and Groups

    How is food insecurity best described?

    1. Choosing foods with little variety
    2. Limited access to enough food due to resources Correct answer.
    3. Avoiding certain foods for health reasons
    4. Having reliable access to affordable food

    Explanation

    Food insecurity means limited or uncertain availability of nutritionally adequate food because of money or other resources. It is distinct from voluntary food restriction for health, cultural, or personal reasons.

  71. Question 71Nutrition Care for Individuals and Groups

    A client receives a formula with 1.5 kcal/mL at 80 mL/hr continuously for 24 hours. How many kilocalories are delivered?

    1. 3,600 kcal
    2. 2,880 kcal Correct answer.
    3. 2,400 kcal
    4. 1,920 kcal

    Explanation

    First multiply the concentration by the rate: 1.5 kcal/mL × 80 mL/hr = 120 kcal/hr. Then multiply by 24 hours to get 2,880 kcal per day.

  72. Question 72Nutrition Care for Individuals and Groups

    Using the Holliday-Segar method, what is the daily maintenance fluid need for a 26 kg child?

    1. 1,820 mL
    2. 1,620 mL Correct answer.
    3. 2,600 mL
    4. 1,300 mL

    Explanation

    Holliday-Segar provides 100 mL/kg for the first 10 kg, 50 mL/kg for the next 10 kg, and 20 mL/kg for each kilogram above 20. For 26 kg: 1,000 + 500 + 120 = 1,620 mL/day.

  73. Question 73Nutrition Care for Individuals and Groups

    Using the standard formula, what is the ideal body weight for a man who is 5 feet 10 inches tall?

    1. 178 lb
    2. 190 lb
    3. 166 lb Correct answer.
    4. 150 lb

    Explanation

    For men, ideal body weight is 106 lb for the first 5 feet plus 6 lb for each additional inch. Ten inches over 5 feet adds 60 lb, giving 166 lb.

  74. Question 74Nutrition Care for Individuals and Groups

    A client with an acute Crohn's disease flare has a serum albumin of 2.8 g/dL even though reported intake has been adequate. What is the most likely explanation?

    1. Excessive protein intake
    2. Iron deficiency
    3. Impaired swallowing
    4. Inflammation lowering albumin production Correct answer.

    Explanation

    Albumin is a negative acute-phase protein, so the liver reduces its synthesis during inflammation and moves resources to positive acute-phase proteins. A low value therefore does not by itself prove inadequate intake.

  75. Question 75Nutrition Care for Individuals and Groups

    A client cannot eat but has a fully functional gastrointestinal tract. Which approach to nutrition support is preferred?

    1. Parenteral nutrition carries no infection risk
    2. Enteral nutrition must always be given by bolus
    3. Parenteral nutrition preserves gut integrity better
    4. Enteral feeding is preferred if the gut works Correct answer.

    Explanation

    Enteral nutrition is preferred whenever the gastrointestinal tract can be used because it maintains mucosal integrity, supports immune function, and costs less. Parenteral nutrition is reserved for clients whose gut cannot function or be accessed.

  76. Question 76Nutrition Care for Individuals and Groups

    Which step of the Nutrition Care Process involves obtaining and interpreting anthropometric, biochemical, clinical, and dietary data?

    1. Nutrition diagnosis
    2. Nutrition intervention
    3. Nutrition monitoring and evaluation
    4. Nutrition assessment Correct answer.

    Explanation

    Nutrition assessment is the first step of the Nutrition Care Process and involves collecting and interpreting data from multiple domains, including anthropometric, biochemical, clinical, and dietary information. The later steps build on this assessment to identify and address nutrition problems.

  77. Question 77Nutrition Care for Individuals and Groups

    In a PES statement, what does the “E” stand for?

    1. Energy
    2. Etiology Correct answer.
    3. Evaluation
    4. Evidence

    Explanation

    A PES statement is formatted as Problem, Etiology, and Signs or Symptoms. The etiology component identifies the cause or contributing factors related to the nutrition problem.

  78. Question 78Nutrition Care for Individuals and Groups

    Which measurement is most specific for assessing abdominal obesity?

    1. Waist circumference Correct answer.
    2. Mid-upper arm circumference
    3. Body mass index
    4. Head circumference

    Explanation

    Waist circumference reflects fat distribution and central adiposity, which is associated with cardiometabolic risk. Body mass index reflects overall weight status but does not distinguish abdominal fat.

  79. Question 79Nutrition Care for Individuals and Groups

    Which laboratory test best reflects body iron stores in a client without acute inflammation?

    1. Prealbumin
    2. Serum albumin
    3. Ferritin Correct answer.
    4. Hemoglobin

    Explanation

    Ferritin is a storage protein for iron, and a low serum ferritin generally indicates depleted iron stores when inflammation is absent. Hemoglobin reflects functional iron status but can remain normal early in iron depletion.

  80. Question 80Nutrition Care for Individuals and Groups

    In the MyPlate model, which food groups should fill about one-half of the plate?

    1. Dairy and protein foods
    2. Grains and protein foods
    3. Grains and fruits
    4. Fruits and vegetables Correct answer.

    Explanation

    MyPlate divides the plate so that fruits and vegetables together occupy about one-half, while grains and protein foods each occupy about one-quarter. Dairy is pictured beside the plate.

  81. Question 81Nutrition Care for Individuals and Groups

    Which parameter should a client receiving insulin monitor to detect hypoglycemia?

    1. Body weight
    2. Blood glucose Correct answer.
    3. Hemoglobin A1c
    4. Serum albumin

    Explanation

    Blood glucose monitoring detects acute changes and is used to identify hypoglycemia in clients receiving insulin. Hemoglobin A1c reflects longer-term glycemia rather than an acute low glucose level.

  82. Question 82Nutrition Care for Individuals and Groups

    Fortification of enriched grain products in the United States was mandated primarily to reduce the incidence of which condition?

    1. Beriberi
    2. Pellagra
    3. Neural tube defects Correct answer.
    4. Scurvy

    Explanation

    Folic acid fortification of enriched grain products was introduced to increase folate intake and reduce the occurrence of neural tube defects in infants. The other conditions are associated with deficiencies of vitamin C, thiamin, or niacin.

  83. Question 83Nutrition Care for Individuals and Groups

    Which growth reference is recommended for monitoring the growth of children from birth to 2 years in the United States?

    1. WHO growth standards Correct answer.
    2. CDC growth charts
    3. Adult stature charts
    4. BMI-for-age charts

    Explanation

    The World Health Organization growth standards are recommended for children from birth through 2 years in the United States, while CDC growth charts are generally used for children older than 2 years. These references support consistent interpretation of infant growth.

  84. Question 84Nutrition Care for Individuals and Groups

    A client's weight decreased from 82 kg to 74 kg over 3 months. What is the percent weight loss?

    1. 10.8%
    2. 8.0%
    3. 12.0%
    4. 9.8% Correct answer.

    Explanation

    Percent weight loss is calculated as the amount lost divided by the previous weight, multiplied by 100. The loss is 8 kg, and 8 divided by 82 equals approximately 9.8%.

  85. Question 85Nutrition Care for Individuals and Groups

    Which grain is naturally gluten-free and appropriate for a client with celiac disease?

    1. Quinoa Correct answer.
    2. Rye
    3. Barley
    4. Wheat berries

    Explanation

    Quinoa is a naturally gluten-free pseudocereal and can be included in a gluten-free eating pattern. Barley, rye, and wheat contain gluten proteins that must be avoided in celiac disease.

  86. Question 86Nutrition Care for Individuals and Groups

    A client taking warfarin should receive counseling about which dietary practice?

    1. Avoid all green vegetables
    2. Keep vitamin K intake consistent Correct answer.
    3. Take vitamin K supplements daily
    4. Sharply increase vitamin K intake

    Explanation

    Warfarin interferes with vitamin K-dependent clotting factor synthesis, so a consistent dietary intake of vitamin K helps keep anticoagulation effects stable. Clients should not routinely avoid all green vegetables or add vitamin K supplements without prescriber guidance.

  87. Question 87Nutrition Care for Individuals and Groups

    A conscious client with diabetes has a blood glucose of 58 mg/dL. Which action is most appropriate initially?

    1. Provide 15 g fast-acting carbohydrate Correct answer.
    2. Give a high-protein snack
    3. Have the client exercise vigorously
    4. Administer insulin

    Explanation

    A blood glucose of 58 mg/dL indicates hypoglycemia in a client with diabetes. For a conscious client who can swallow, the initial response is to give about 15 g of fast-acting carbohydrate and then recheck glucose.

  88. Question 88Nutrition Care for Individuals and Groups

    A client with chronic kidney disease is prescribed a phosphate binder. When should the dietetic technician teach the client to take it?

    1. On an empty stomach in the morning
    2. Once daily at bedtime
    3. Only when phosphorus is elevated
    4. With meals and snacks Correct answer.

    Explanation

    Phosphate binders work by binding dietary phosphate in the gastrointestinal tract, so they are taken with meals and snacks. Taking them away from food limits their ability to reduce phosphate absorption.

  89. Question 89Nutrition Care for Individuals and Groups

    Which nutrition intervention is most appropriate for a client with heart failure and fluid retention?

    1. Restrict protein to 0.4 g/kg
    2. Liberalize sodium to improve appetite
    3. Reduce sodium intake as prescribed Correct answer.
    4. Increase potassium-containing salt substitutes

    Explanation

    Reducing sodium intake as prescribed helps limit fluid retention in heart failure. Potassium-containing salt substitutes can be hazardous in some clients, and routine severe protein restriction is not indicated for heart failure.

  90. Question 90Nutrition Care for Individuals and Groups

    An older adult with sarcopenia has adequate kidney function. Which protein intake is most appropriate to support muscle mass?

    1. 2.5 g/kg/day
    2. 0.6 g/kg/day
    3. 1.0 to 1.2 g/kg/day Correct answer.
    4. 0.4 g/kg/day

    Explanation

    Older adults with sarcopenia often need protein intake above the basic adult requirement, commonly around 1.0 to 1.2 g/kg/day, when kidney function is adequate. Very low intakes can worsen muscle loss, while extremely high intakes are not routinely recommended.

  91. Question 91Nutrition Care for Individuals and Groups

    Which two-item screening tool is commonly used to identify food insecurity in clinical settings?

    1. Patient Health Questionnaire-2
    2. Hunger Vital Sign Correct answer.
    3. Braden Scale
    4. Mini Nutritional Assessment

    Explanation

    The Hunger Vital Sign uses two brief statements about food adequacy and is widely used to screen for food insecurity in health care settings. The other tools screen for nutritional status, depression, or pressure injury risk.

  92. Question 92Nutrition Care for Individuals and Groups

    Which dietary assessment method is best suited for estimating a client's usual long-term intake of a specific nutrient?

    1. Single 24-hour dietary recall
    2. Food frequency questionnaire Correct answer.
    3. Observed meal intake
    4. One-day food diary

    Explanation

    A food frequency questionnaire asks about habitual intake over weeks or months, making it useful for estimating usual long-term nutrient intake. Single-day methods capture short-term intake and may not represent usual patterns.

  93. Question 93Nutrition Care for Individuals and Groups

    Which strategy best confirms that a client understands a new carbohydrate-counting plan?

    1. Raise the reading level of the handout
    2. Have the client sign an attendance sheet
    3. Use teach-back with the client Correct answer.
    4. Provide a pamphlet without discussion

    Explanation

    Teach-back asks the client to explain the plan in their own words, allowing the educator to confirm understanding and correct misunderstandings. Attendance, handout provision, or higher reading level does not demonstrate comprehension.

  94. Question 94Nutrition Care for Individuals and Groups

    Which client goal is written as a SMART objective?

    1. The client will try to lose weight as soon as possible
    2. Eat 3 vegetable servings daily for 2 weeks Correct answer.
    3. The client will understand a healthy diet
    4. The client will eat better

    Explanation

    A SMART objective is specific, measurable, achievable, relevant, and time-bound. Eating three vegetable servings daily for 2 weeks meets those criteria, whereas vague goals do not.

  95. Question 95Nutrition Care for Individuals and Groups

    What vitamin D supplementation is recommended for an exclusively breastfed infant beginning soon after birth?

    1. 200 IU/day
    2. 1000 IU/day
    3. 400 IU/day Correct answer.
    4. 100 IU/day

    Explanation

    Exclusively breastfed infants are recommended to receive 400 IU of vitamin D daily beginning soon after birth to support bone health. Breast milk alone does not provide sufficient vitamin D for this recommendation.

  96. Question 96Nutrition Care for Individuals and Groups

    A client with severe malnutrition is starting enteral feeding. Which electrolyte should be monitored most closely in the first week because of refeeding risk?

    1. Chloride
    2. Phosphate Correct answer.
    3. Sodium
    4. Calcium

    Explanation

    Refeeding syndrome is characterized most notably by hypophosphatemia as insulin release drives phosphate into cells during reintroduction of nutrition. Close monitoring and appropriate electrolyte replacement are essential in clients at high risk.

  97. Question 97Nutrition Care for Individuals and Groups

    A client receiving parenteral nutrition has an indirect calorimetry respiratory quotient of 1.15. What is the most likely interpretation?

    1. Carbohydrate overfeeding Correct answer.
    2. Underfeeding with fat oxidation
    3. Adequate fasting metabolism
    4. Measurement error from room air

    Explanation

    A respiratory quotient above 1.0 suggests net lipogenesis, which often reflects excess carbohydrate intake relative to energy needs. Values in the usual mixed-substrate range are closer to 0.7 to 1.0.

  98. Question 98Nutrition Care for Individuals and Groups

    For an adult who weighs 120 kg and has an ideal body weight of 66 kg, what is the adjusted body weight using 25% of the difference between actual and ideal body weight?

    1. 79.5 kg Correct answer.
    2. 72 kg
    3. 120 kg
    4. 66 kg

    Explanation

    Adjusted body weight is calculated as ideal body weight plus 25% of the difference between actual and ideal weight. The difference is 54 kg, 25% of 54 kg is 13.5 kg, and 66 plus 13.5 equals 79.5 kg.

  99. Question 99Nutrition Care for Individuals and Groups

    A client with mild acute pancreatitis is hemodynamically stable and has no vomiting. Which nutrition approach is preferred once pain and nausea are controlled?

    1. Place a nasogastric tube for enteral feeding
    2. Start parenteral nutrition immediately
    3. Begin a low-fat oral diet as tolerated Correct answer.
    4. Keep the client NPO for 7 days

    Explanation

    In mild acute pancreatitis, oral feeding with a low-fat diet can begin as tolerated once pain and nausea are controlled, rather than prolonged fasting. Parenteral nutrition is generally reserved for clients who cannot be fed enterally or orally.

  100. Question 100Nutrition Care for Individuals and Groups

    A client with cirrhosis and ascites has no hepatic encephalopathy. How should protein be provided?

    1. Use only plant protein sources
    2. Withhold protein until ascites resolves
    3. Restrict protein to 0.4 g/kg/day
    4. Provide 1.2 to 1.5 g/kg/day Correct answer.

    Explanation

    Clients with cirrhosis are often catabolic and need adequate protein, commonly around 1.2 to 1.5 g/kg/day, to support lean mass and healing. Severe protein restriction is not routinely indicated and can worsen malnutrition.

  101. Question 101Foodservice Systems

    Which temperature range represents the food safety danger zone for holding TCS foods?

    1. 41°F to 135°F (5°C to 57°C) Correct answer.
    2. 135°F to 165°F (57°C to 74°C)
    3. 0°F to 41°F (-18°C to 5°C)
    4. 165°F to 212°F (74°C to 100°C)

    Explanation

    Bacteria that cause foodborne illness multiply most rapidly between 41°F and 135°F. TCS foods therefore must be held either below 41°F or above 135°F. Time in this range should be minimized during preparation and service.

  102. Question 102Foodservice Systems

    Which practice does the FIFO inventory method require?

    1. Using the oldest stored product before newly received product Correct answer.
    2. Counting all inventory at month-end to set order quantities
    3. Placing newly received items in front so the newest stock is used first
    4. Discarding every product that reaches its printed use-by date

    Explanation

    FIFO stands for first in, first out, meaning older stock is used before newer stock. This rotation reduces spoilage and waste. Storage should be arranged so older items are physically accessible first.

  103. Question 103Foodservice Systems

    A standardized recipe in a foodservice operation ensures that:

    1. the menu can be changed daily without additional costing
    2. the same quality and yield are produced each time Correct answer.
    3. food cost is recalculated for every tray served
    4. the cook has freedom to vary ingredients for creativity

    Explanation

    A standardized recipe specifies exact ingredients, quantities, procedures, and yield so the product is consistent from batch to batch. Consistency supports cost control and customer satisfaction. It also allows accurate nutrient analysis for therapeutic diets.

  104. Question 104Foodservice Systems

    What is the minimum recommended time for scrubbing hands with soap during handwashing?

    1. 60 seconds
    2. 5 seconds
    3. 20 seconds Correct answer.
    4. 10 seconds

    Explanation

    Guidance calls for scrubbing hands with soap for about 20 seconds before rinsing and drying. The friction and duration together remove soil and microorganisms. Shorter scrubbing times do not achieve the same reduction.

  105. Question 105Foodservice Systems

    At receiving, a shipment of frozen chicken shows large ice crystals and soft spots. What is the appropriate action?

    1. Accept and freeze immediately
    2. Reject it as thawed and refrozen product Correct answer.
    3. Accept and use within one day
    4. Accept and re-check temperature after freezing

    Explanation

    Large ice crystals and soft spots indicate the product thawed and was refrozen, which signals temperature abuse and quality loss. Such shipments should be rejected at the dock. Rejecting protects both safety and food quality.

  106. Question 106Foodservice Systems

    In a three-compartment sink, the compartments are used in which order?

    1. Wash, rinse, sanitize Correct answer.
    2. Rinse, wash, sanitize
    3. Sanitize, wash, rinse
    4. Wash, sanitize, rinse

    Explanation

    Equipment is washed in detergent, rinsed to remove soil and detergent, then sanitized in the third compartment. Rinsing before sanitizing lets the sanitizer contact a clean surface. Sanitizer works poorly when soil or detergent residue remains.

  107. Question 107Foodservice Systems

    Standardized portion control primarily helps a foodservice operation to:

    1. shorten the time needed for dishwashing
    2. increase the variety of items offered
    3. reduce tray line staffing needs
    4. control food cost and nutrient content Correct answer.

    Explanation

    Serving a consistent portion size keeps the number of portions per recipe predictable, which controls food cost. It also keeps calories and nutrients consistent for therapeutic diets. Without portion control, both cost and nutrient content vary.

  108. Question 108Foodservice Systems

    Dry storage areas for canned and packaged goods should be kept at:

    1. 90°F to 100°F (32°C to 38°C)
    2. 50°F to 70°F (10°C to 21°C) Correct answer.
    3. 75°F to 85°F (24°C to 29°C)
    4. 30°F to 40°F (-1°C to 4°C)

    Explanation

    Dry storage should be cool, dry, and well ventilated, generally between 50°F and 70°F. Cooler temperatures slow quality loss in canned and packaged goods. High humidity and heat promote caking, off-flavors, and pests.

  109. Question 109Foodservice Systems

    In a HACCP plan, a critical control point is best described as:

    1. a location where finished products are held before service
    2. a point where an inspector verifies that records are complete
    3. a procedure for training employees on safety practices
    4. a step where a hazard can be prevented, eliminated, or reduced Correct answer.

    Explanation

    A critical control point is a step in the process where a control measure can prevent, eliminate, or reduce a food safety hazard to an acceptable level. Each CCP has measurable limits and is monitored. Not every step in a process is a CCP.

  110. Question 110Foodservice Systems

    On a menu engineering matrix, a menu item that is high in popularity but low in contribution margin is classified as a:

    1. star
    2. plowhorse Correct answer.
    3. puzzle
    4. dog

    Explanation

    Menu items are plotted by popularity and contribution margin. High popularity with low margin is a plowhorse, which sells well but earns little per item. Strategies include adjusting portion size, raising price slightly, or reducing ingredient cost.

  111. Question 111Foodservice Systems

    A cafeteria has food cost of $4,000 and food sales of $10,000 for the month. What is the food cost percentage?

    1. 40% Correct answer.
    2. 60%
    3. 25%
    4. 250%

    Explanation

    Food cost percentage equals food cost divided by food sales, multiplied by 100. Here, $4,000 divided by $10,000 equals 0.40, or 40%. This figure is compared with the operation's budgeted target.

  112. Question 112Foodservice Systems

    Which statement describes the cook-chill production system?

    1. Foods are served without any reheating step
    2. Foods are cooked and held hot until the next meal period
    3. Foods are portioned and chilled on the tray line
    4. Foods are cooked, rapidly chilled, and reheated later Correct answer.

    Explanation

    Cook-chill production cooks food, rapidly chills it to a safe temperature, and stores it under refrigeration until reheating and service. Rapid chilling shortens the time food spends in the danger zone. The extended holding period allows production to be separated from service.

  113. Question 113Foodservice Systems

    A production forecast for next week is best based on:

    1. past sales records adjusted for expected events and changes Correct answer.
    2. the previous day's menu only
    3. the number of employees scheduled for each day
    4. the vendor's minimum order requirements

    Explanation

    Forecasting uses historical sales data adjusted for predictable factors such as holidays, weather, and special events. Staffing and ordering decisions follow from the forecast. A forecast based only on one previous day ignores trends.

  114. Question 114Foodservice Systems

    To prevent cross-contamination in the kitchen, raw poultry should be:

    1. handled with the same gloves used for salads
    2. stored above ready-to-eat foods in the cooler
    3. prepared on a board reserved for raw meat Correct answer.
    4. cut on the same board as vegetables if the board is rinsed

    Explanation

    Using a dedicated or color-coded board for raw meat keeps pathogens away from ready-to-eat foods. Rinsing alone does not sanitize a cutting surface. Separate equipment and handwashing are core cross-contamination controls.

  115. Question 115Foodservice Systems

    A kitchen has labor cost of $6,000 and total revenue of $20,000. What is the labor cost percentage?

    1. 15%
    2. 30% Correct answer.
    3. 20%
    4. 25%

    Explanation

    Labor cost percentage equals labor cost divided by total revenue, multiplied by 100. Here, $6,000 divided by $20,000 equals 0.30, or 30%. Managers compare this with the operation's labor cost target.

  116. Question 116Foodservice Systems

    Meals per labor hour is calculated by dividing:

    1. meals served by the number of full-time employees
    2. total sales by labor hours worked
    3. labor hours by the number of meals served
    4. meals served by paid labor hours Correct answer.

    Explanation

    Meals per labor hour divides the number of meals served by the paid labor hours used to produce them. The result measures labor productivity and is compared with departmental benchmarks. A higher value indicates more meals produced per hour of labor.

  117. Question 117Foodservice Systems

    Staggered work schedules in a foodservice department are primarily used to:

    1. allow supervisors to avoid approving overtime
    2. reduce the number of full-time positions
    3. match staffing to peak workload periods Correct answer.
    4. give all employees identical days off

    Explanation

    Staggered scheduling starts and ends shifts at different times so more staff are present during production and service peaks. This improves labor productivity without overstaffing slow periods. It does not change the total number of positions.

  118. Question 118Foodservice Systems

    Compared with a conventional oven, a convection oven typically:

    1. requires a longer cooking time at the same temperature
    2. cannot be used for baked desserts
    3. heats food only from a bottom element
    4. cooks faster because a fan circulates heated air Correct answer.

    Explanation

    A fan moves heated air throughout the cavity, increasing heat transfer and reducing cooking time. Because browning is faster, recipes often call for a slightly lower temperature. Convection ovens are used for both entrees and baked goods.

  119. Question 119Foodservice Systems

    A purchase specification for a food product describes:

    1. the employee training required to prepare it
    2. the menu price to be charged for it
    3. the quality, size, and packaging standards required Correct answer.
    4. delivery schedule and invoice terms

    Explanation

    A specification states the measurable characteristics a product must meet, such as grade, size, pack, and labeling. Clear specifications let vendors bid on the same item and let the operation check deliveries against a standard. Pricing and delivery terms are handled in the purchase agreement.

  120. Question 120Foodservice Systems

    Which foodborne illness is most often linked to cooked meats and gravies held for long periods in the temperature danger zone?

    1. Staphylococcal intoxication
    2. Perfringens food poisoning Correct answer.
    3. Salmonellosis
    4. Listeriosis

    Explanation

    Clostridium perfringens forms heat-resistant spores that survive cooking and grow when foods cool slowly or are held warm for hours. Large batches of meat, stew, and gravy are classic vehicles. Rapid cooling and proper hot holding prevent growth.

  121. Question 121Foodservice Systems

    Which activity is an example of HACCP verification rather than monitoring?

    1. Checking sanitizer strength at the dish machine each hour
    2. Reviewing temperature logs and calibrating thermometers Correct answer.
    3. Taking corrective action when a cooler exceeds 41°F
    4. Recording the final cooking temperature of each batch

    Explanation

    Verification confirms that the HACCP plan is working as intended, which includes record review, thermometer calibration checks, and periodic testing. Monitoring is the scheduled observation or measurement taken at a CCP during production. Corrective action follows a deviation found during monitoring.

  122. Question 122Foodservice Systems

    A menu item has a standard food cost of $2.40, and the operation uses a pricing factor of 3.0. What selling price should be set?

    1. $9.60
    2. $5.40
    3. $4.80
    4. $7.20 Correct answer.

    Explanation

    The factor pricing method multiplies the standard food cost by the pricing factor: $2.40 × 3.0 = $7.20. The factor is derived from the operation's desired food cost percentage. The result should then be checked against competitors and customer expectations.

  123. Question 123Foodservice Systems

    Which characteristic distinguishes a commissary foodservice system from a conventional system?

    1. Only frozen convenience foods are used in production
    2. Assembly occurs before production is completed
    3. Food is prepared and served on the same premises
    4. Central production with distribution to satellite sites Correct answer.

    Explanation

    In a commissary system a central production kitchen prepares food that is transported to separate service sites. A conventional system produces and serves in the same location. The separation of production from service is the defining feature.

  124. Question 124Foodservice Systems

    A department budgeted $12,000 for food cost but actually spent $13,500. How should this variance be reported?

    1. $1,500 unfavorable Correct answer.
    2. $13,500 unfavorable
    3. $12,000 favorable
    4. $1,500 favorable

    Explanation

    Variance is the difference between budgeted and actual amounts: $13,500 − $12,000 = $1,500. Spending more than budgeted is an unfavorable variance for an expense line. Favorable variances occur when actual expense is below budget.

  125. Question 125Foodservice Systems

    A department serves 1,200 meals in a day using 150 paid labor hours, and its productivity target is 10 meals per labor hour. How does the department perform?

    1. 8 meals per labor hour, meeting the target
    2. 15 meals per labor hour, exceeding the target
    3. 8 meals per labor hour, falling short of the target Correct answer.
    4. 12 meals per labor hour, exceeding the target

    Explanation

    Meals per labor hour equals meals served divided by paid hours: 1,200 ÷ 150 = 8. The target is 10, so the department is below standard. Meeting the target would have required no more than 120 labor hours.

  126. Question 126Foodservice Systems

    Which foodservice system relies mainly on pre-prepared foods that are assembled and served with minimal on-site cooking?

    1. Commissary production system
    2. Conventional production system
    3. Assembly-serve system Correct answer.
    4. Cook-chill production system

    Explanation

    An assembly-serve system uses mostly pre-prepared or fully prepared foods, so the unit mainly assembles and serves them. Conventional systems perform most production on site, while commissary and cook-chill systems centralize or extend production in other ways.

  127. Question 127Foodservice Systems

    Potentially hazardous cold foods should be held at or below which temperature?

    1. 60°F (16°C)
    2. 41°F (5°C) Correct answer.
    3. 50°F (10°C)
    4. 55°F (13°C)

    Explanation

    Cold holding of potentially hazardous foods must keep product at 41°F (5°C) or below to limit bacterial growth. Temperatures above that range fall into the danger zone.

  128. Question 128Foodservice Systems

    Frozen foods should be stored at or below which temperature?

    1. 32°F (0°C)
    2. 20°F (-7°C)
    3. 0°F (-18°C) Correct answer.
    4. 10°F (-12°C) or colder

    Explanation

    Frozen storage should maintain food at 0°F (-18°C) or below to keep it solidly frozen and preserve quality. Temperatures above that can allow partial thawing and quality loss.

  129. Question 129Foodservice Systems

    Hot foods held for service should be maintained at or above which temperature?

    1. 120°F (49°C)
    2. 135°F (57°C) Correct answer.
    3. 130°F (54°C)
    4. 145°F (63°C)

    Explanation

    Hot holding must keep foods at 135°F (57°C) or above to prevent bacterial growth. Lower temperatures place the food in the temperature danger zone.

  130. Question 130Foodservice Systems

    Which check is most critical when receiving a delivery of frozen chicken?

    1. Time of day the delivery arrives
    2. Product temperature and thawing Correct answer.
    3. Number of delivery trucks at the dock
    4. Color and print style of packaging

    Explanation

    Frozen deliveries must be checked for product temperature and evidence of thawing or refreezing. These signs indicate possible temperature abuse and safety risk.

  131. Question 131Foodservice Systems

    First-in, first-out (FIFO) means that:

    1. most expensive inventory is used first
    2. newest inventory is used first
    3. oldest inventory is used first Correct answer.
    4. inventory closest to the door is used first

    Explanation

    FIFO requires using the oldest stock before newer stock so that food is rotated and spoilage is reduced. It is a basic inventory-control practice in foodservice.

  132. Question 132Foodservice Systems

    When planning a cycle menu for a hospital, the most important consideration is:

    1. the lowest possible food cost per meal
    2. the nutritional needs of patients Correct answer.
    3. the favorite recipes of the chef
    4. the length of the cafeteria serving line

    Explanation

    A hospital cycle menu must first support the nutritional and therapeutic needs of patients. Cost, staff preference, and serving-line length are secondary to meeting dietary requirements.

  133. Question 133Foodservice Systems

    The primary purpose of work simplification in a foodservice operation is to:

    1. purchase more equipment for each station
    2. add more staff positions to each work shift
    3. cut waste by removing needless steps Correct answer.
    4. increase the number of menu items offered daily

    Explanation

    Work simplification studies tasks to remove unnecessary motions, steps, and delays. The goal is more efficient use of labor and resources without reducing quality.

  134. Question 134Foodservice Systems

    If monitoring shows that a critical limit at a critical control point has not been met, what is the required next step?

    1. Recalibrate the thermometer only
    2. Continue production and check again later
    3. Take a documented corrective action Correct answer.
    4. Ignore the result if the food looks normal

    Explanation

    A critical limit failure requires an immediate, documented corrective action to prevent or eliminate the hazard. The action may include holding, rejecting, or reprocessing the food as appropriate.

  135. Question 135Foodservice Systems

    Which document is a typical HACCP monitoring record?

    1. Employee vacation request schedule
    2. Refrigeration temperature log Correct answer.
    3. Printed menu price list for guests
    4. Equipment purchase order form

    Explanation

    HACCP monitoring records document measured values, such as refrigerator temperatures, at specified frequencies. These records provide evidence that critical limits are being controlled.

  136. Question 136Foodservice Systems

    Cooked food must be cooled from 135°F to 70°F within how many hours?

    1. 1 hour
    2. 2 hours Correct answer.
    3. 4 hours
    4. 3 hours

    Explanation

    The two-stage cooling standard requires food to go from 135°F to 70°F within 2 hours. It must then cool from 70°F to 41°F within an additional 4 hours.

  137. Question 137Foodservice Systems

    Leftover food that will be hot-held must be reheated to what minimum internal temperature?

    1. 165°F (74°C) for 15 seconds Correct answer.
    2. 155°F (68°C) for 15 seconds
    3. 145°F (63°C) for 15 seconds
    4. 135°F (57°C) for at least 15 seconds

    Explanation

    Reheating food for hot holding requires reaching 165°F (74°C) for 15 seconds. This temperature provides a safety margin for foods that have already been cooked and cooled.

  138. Question 138Foodservice Systems

    A par stock level represents the:

    1. quantity needed between deliveries Correct answer.
    2. number of workers scheduled each shift
    3. total yearly sales forecast for the unit
    4. highest price paid for each item

    Explanation

    Par stock is the inventory quantity needed to cover expected use between deliveries, often with a safety margin. It helps prevent both shortages and excess stock.

  139. Question 139Foodservice Systems

    Inventory turnover is calculated by dividing cost of goods sold by:

    1. number of production employees
    2. total sales revenue
    3. average inventory value Correct answer.
    4. number of meals served each day

    Explanation

    Inventory turnover measures how often inventory is used or sold during a period. It is cost of goods sold divided by average inventory value.

  140. Question 140Foodservice Systems

    A café has fixed costs of $2,000 per month, an average selling price of $5 per meal, and variable costs of $3 per meal. What is the break-even point in meals?

    1. 1,000 meals Correct answer.
    2. 2,000 meals per month
    3. 400 meals
    4. 667 meals

    Explanation

    Break-even meals equal fixed costs divided by the contribution margin per meal. Here, $2,000 ÷ ($5 − $3) = 1,000 meals.

  141. Question 141Foodservice Systems

    A Gantt chart is most useful in foodservice for:

    1. calculating the monthly food cost percentage
    2. scheduling work tasks over time Correct answer.
    3. forecasting customer counts for each day
    4. evaluating menu item popularity

    Explanation

    A Gantt chart displays tasks along a timeline and helps managers schedule work and employees. It shows when activities start and finish and how they overlap.

  142. Question 142Foodservice Systems

    A straight-line flow in a kitchen layout is intended mainly to:

    1. expand the capacity of dry storage areas
    2. reduce backtracking and cross-traffic Correct answer.
    3. increase the number of seats in the dining room
    4. lower the selling prices on the menu

    Explanation

    A straight-line flow arranges work areas in sequence so food moves steadily from receiving to service. This reduces backtracking and crossing of clean and dirty paths.

  143. Question 143Foodservice Systems

    Which practice best conserves energy in a foodservice kitchen?

    1. Turn off unused equipment and lights Correct answer.
    2. Keep refrigerator doors open during prep
    3. Run dish machines with partial loads
    4. Leave ovens on all day for convenience

    Explanation

    Shutting off equipment and lights when they are not in use avoids unnecessary energy consumption. Full loads and closed refrigerator doors also conserve energy.

  144. Question 144Foodservice Systems

    Which action is the best first step in starting a foodservice waste-reduction program?

    1. Reduce staff training
    2. Conduct a waste audit Correct answer.
    3. Purchase new disposal equipment
    4. Increase menu prices

    Explanation

    A waste audit identifies what is being wasted, where it is generated, and in what amounts. That baseline allows the operation to target the most effective reduction strategies.

  145. Question 145Foodservice Systems

    A patient satisfaction survey is most useful to a foodservice director for:

    1. writing purchase specifications for vendors
    2. identifying services that need improvement Correct answer.
    3. setting the annual food and labor budget
    4. calculating the meals per labor hour ratio

    Explanation

    Satisfaction surveys reveal patient perceptions of food quality, timeliness, and service. The results help prioritize improvements in service delivery.

  146. Question 146Foodservice Systems

    In sous-vide production, which control is most important for preventing growth of anaerobic pathogens?

    1. Color and print of the vacuum bag
    2. Number of menu choices offered
    3. Time and temperature control Correct answer.
    4. Size and experience of kitchen staff

    Explanation

    Vacuum packaging removes oxygen and can favor anaerobic pathogens such as Clostridium botulinum. Strict time and temperature control is therefore essential for safety.

  147. Question 147Foodservice Systems

    A foodservice operation has food cost of $12,000, labor cost of $18,000, and total revenue of $50,000. What is the prime cost percentage?

    1. 36%
    2. 24%
    3. 50%
    4. 60% Correct answer.

    Explanation

    Prime cost is food cost plus labor cost, or $30,000. Dividing $30,000 by $50,000 gives a prime cost percentage of 60%.

  148. Question 148Foodservice Systems

    Raw shell eggs are a common source of which foodborne pathogen?

    1. Staphylococcus aureus
    2. Salmonella Correct answer.
    3. Clostridium botulinum
    4. Vibrio vulnificus

    Explanation

    Raw shell eggs are frequently associated with Salmonella, so they must be handled and cooked carefully. Pooling eggs and inadequate cooking increase the risk.

  149. Question 149Foodservice Systems

    An operation has revenue of $50,000, food cost of $15,000, labor cost of $20,000, and other expenses of $10,000. What is the profit?

    1. $5,000 Correct answer.
    2. $20,000
    3. $15,000
    4. $10,000

    Explanation

    Profit equals revenue minus all expenses. Here, $50,000 − $15,000 − $20,000 − $10,000 = $5,000.

  150. Question 150Foodservice Systems

    In a centralized tray assembly system, what is a major advantage?

    1. better temperature and tray accuracy Correct answer.
    2. greater duplication of serving equipment
    3. longer transport distances to patients
    4. more decentralized labor scheduling

    Explanation

    Centralized tray assembly brings production and tray setup into one controlled area. This supports consistent portioning, tray accuracy, and closer temperature control before distribution.

  151. Question 151Management of Food and Nutrition Systems

    Which management approach holds that employees are motivated primarily by social needs and by the norms of informal work groups?

    1. Bureaucratic management
    2. Human relations approach Correct answer.
    3. Contingency approach
    4. Scientific management

    Explanation

    The human relations approach grew out of the Hawthorne studies, which showed that social relationships and informal group norms strongly influence worker motivation and productivity. It encouraged participation, communication, and attention to employee needs. Scientific management instead focused on task efficiency and time-motion study.

  152. Question 152Management of Food and Nutrition Systems

    The number of employees who report directly to one supervisor is called the:

    1. Span of control Correct answer.
    2. Line authority
    3. Unity of command
    4. Chain of command

    Explanation

    Span of control refers to how many subordinates a manager directly supervises. A narrow span produces a tall organization with many management levels, while a wide span produces a flatter structure.

  153. Question 153Management of Food and Nutrition Systems

    A foodservice system in which food is produced in bulk, rapidly chilled, stored cold, and reheated at the service site is known as:

    1. Assembly-serve
    2. Cook-chill Correct answer.
    3. Commissary
    4. Conventional

    Explanation

    Cook-chill production cooks food in bulk, rapidly chills it to a safe cold temperature, holds it chilled, and rethermalizes it near service time. The rapid chilling step is the defining process control. Conventional systems, by contrast, prepare and serve food on the same premises with little holding.

  154. Question 154Management of Food and Nutrition Systems

    Potentially hazardous cold food must be held at or below which temperature?

    1. 32°F (0°C)
    2. 50°F (10°C)
    3. 45°F (7°C)
    4. 41°F (5°C) Correct answer.

    Explanation

    The FDA Food Code sets 41°F (5°C) as the maximum holding temperature for cold potentially hazardous food, keeping it out of the temperature danger zone. Holding at 45°F or 50°F allows rapid bacterial growth.

  155. Question 155Management of Food and Nutrition Systems

    A menu that repeats a set of daily menus on a defined schedule, such as every four weeks, is called a:

    1. À la carte menu
    2. Static menu
    3. Cycle menu Correct answer.
    4. Du jour menu

    Explanation

    A cycle menu repeats a planned series of daily menus on a set rotation, which supports forecasting, purchasing, and production planning. Static menus stay unchanged for long periods, and à la carte and du jour refer to pricing or daily-offering formats.

  156. Question 156Management of Food and Nutrition Systems

    Which budget is usually prepared first because projected sales volume drives most other budget figures?

    1. Cash-flow budget
    2. Sales (revenue) budget Correct answer.
    3. Capital budget
    4. Labor budget

    Explanation

    The sales or revenue budget establishes expected volume and income, and food, labor, and supply budgets are then built to support that volume. Capital and cash-flow budgets are derived later from operating plans.

  157. Question 157Management of Food and Nutrition Systems

    A manager who makes decisions alone and expects staff to comply without discussion is using which leadership style?

    1. Autocratic Correct answer.
    2. Transactional
    3. Laissez-faire
    4. Democratic

    Explanation

    Autocratic leaders centralize decision-making and expect compliance, which can be efficient in emergencies but may reduce staff engagement. Democratic leaders involve staff in decisions, and laissez-faire leaders give the group wide freedom.

  158. Question 158Management of Food and Nutrition Systems

    A document that invites suppliers to submit prices for specified products under stated terms is called a(n):

    1. Receiving report
    2. Purchase order
    3. Invitation to bid Correct answer.
    4. Requisition

    Explanation

    An invitation to bid, also called a request for quotation, solicits competitive prices before a supplier is selected. A purchase order is issued after the price and supplier are chosen, and a requisition is an internal request to buy.

  159. Question 159Management of Food and Nutrition Systems

    A department serves 4,200 meals in a month using 1,050 labor hours. What is the meals per labor hour (MPLH)?

    1. 3.75
    2. 2.5
    3. 4.0 Correct answer.
    4. 3.5

    Explanation

    Meals per labor hour equals meals served divided by labor hours paid or worked: 4,200 ÷ 1,050 = 4.0. This productivity measure rises when output increases without a matching increase in hours.

  160. Question 160Management of Food and Nutrition Systems

    A menu item sells for $8.00 and has a food cost of $2.40. What is its food cost percentage?

    1. 33%
    2. 24%
    3. 30% Correct answer.
    4. 40%

    Explanation

    Food cost percentage equals food cost divided by selling price: $2.40 ÷ $8.00 = 0.30, or 30%. This percentage is compared with the operation's target to judge pricing and cost control.

  161. Question 161Management of Food and Nutrition Systems

    When developing a production forecast for a hospital cafeteria, the most useful starting point is:

    1. Last year's overall food cost percentage
    2. The supplier's delivery schedule
    3. Previous sales records adjusted for known events and trends Correct answer.
    4. The number of items printed on the menu

    Explanation

    Forecasts are built from historical demand data adjusted for predictable influences such as day of week, holidays, weather, census changes, and special events. Cost percentages and delivery schedules do not estimate how much food to produce.

  162. Question 162Management of Food and Nutrition Systems

    The plan-do-check-act (PDCA) cycle is a tool used primarily for:

    1. Continuous quality improvement Correct answer.
    2. Employee recruitment
    3. Capital equipment purchasing
    4. Menu pricing

    Explanation

    PDCA structures improvement work: plan a change, carry it out on a small scale, check the results against measures, and act to standardize or revise. It is a core method in continuous quality improvement.

  163. Question 163Management of Food and Nutrition Systems

    A cook has been late three times in two weeks. Which action is most consistent with progressive discipline?

    1. Suspension without pay
    2. Documented verbal counseling Correct answer.
    3. Immediate termination
    4. Reassignment to another department

    Explanation

    Progressive discipline starts with the least severe step, typically documented verbal counseling, and escalates to written warnings, suspension, and termination only if behavior continues. Immediate termination or suspension would skip required steps.

  164. Question 164Management of Food and Nutrition Systems

    In a cook-chill operation, which step is a critical control point?

    1. Ordering packaging supplies
    2. Scheduling staff for the chill room
    3. Cooling food from 135°F to 70°F within 2 hours Correct answer.
    4. Posting handwashing signs

    Explanation

    A critical control point is a step where a measurable control can prevent, eliminate, or reduce a food safety hazard to an acceptable level. Time and temperature limits during cooling directly control pathogen growth. Staffing, ordering, and signage are prerequisite programs, not CCPs.

  165. Question 165Management of Food and Nutrition Systems

    Under the FIFO issuing method, which container of product should be used first?

    1. The largest container in stock
    2. The one with the earliest use-by or pack date Correct answer.
    3. The one with the lowest unit cost
    4. The one received most recently

    Explanation

    FIFO, first in first out, rotates stock so the oldest product is used before newer deliveries. The earliest use-by or pack date identifies the oldest stock and reduces spoilage and expired product.

  166. Question 166Management of Food and Nutrition Systems

    The traditional marketing mix consists of product, price, place, and:

    1. Positioning
    2. Profit
    3. People
    4. Promotion Correct answer.

    Explanation

    The classic four Ps of marketing are product, price, place, and promotion. People is part of the extended service marketing mix, while positioning is a strategy for shaping how customers perceive the brand.

  167. Question 167Management of Food and Nutrition Systems

    When selecting a new range for a hospital kitchen, the first consideration should be:

    1. The space available in the storeroom
    2. The color and finish
    3. The menu and production volume requirements Correct answer.
    4. The brand used by nearby hospitals

    Explanation

    Equipment selection begins with a needs assessment: the menu, volume, production method, and available utilities determine the required capacity and features. Brand popularity or appearance should be secondary to functional fit.

  168. Question 168Management of Food and Nutrition Systems

    A unit needs 3 employees on each of 3 shifts every day of the week. Each full-time employee works 5 shifts per week. How many full-time employees are needed to cover the schedule before adding relief for vacation and illness?

    1. 12
    2. 13 Correct answer.
    3. 9
    4. 21

    Explanation

    Weekly shifts required are 3 employees × 3 shifts × 7 days = 63 shifts. Dividing 63 by 5 shifts per employee gives 12.6, which must be rounded up to 13 employees to cover every shift.

  169. Question 169Management of Food and Nutrition Systems

    A supervisor rates nearly every employee as 'average,' even though performance varies widely. This rating error is called:

    1. Leniency error
    2. Central tendency error Correct answer.
    3. Halo effect
    4. Recency error

    Explanation

    Central tendency error occurs when a rater clusters all ratings around the middle of the scale to avoid extremes. Halo error lets one strong trait influence all ratings, leniency inflates ratings, and recency overweights recent events.

  170. Question 170Management of Food and Nutrition Systems

    Which federal agency publishes the Food Code that serves as the model for state and local food safety regulations?

    1. USDA
    2. EPA
    3. FDA Correct answer.
    4. CDC

    Explanation

    The FDA publishes the Food Code, a model regulation that state, local, and tribal agencies adopt or adapt. USDA regulates meat, poultry, and egg products, while CDC investigates foodborne illness and EPA oversees pesticides and water.

  171. Question 171Management of Food and Nutrition Systems

    For patient trays that must travel a long distance and arrive hot, the most appropriate delivery system is:

    1. Decentralized pantry service with no holding equipment
    2. Room-service trays carried by hand
    3. Insulated trays or pellets with heated carts Correct answer.
    4. Open tray carts without insulation

    Explanation

    Insulated trays, pellet systems, and heated carts are designed to hold food above 135°F during transport over long distances. Open carts and unheated service allow rapid heat loss into the danger zone.

  172. Question 172Management of Food and Nutrition Systems

    A foodservice department is 2% over its labor budget and 1% under its food budget. The most appropriate first step is to:

    1. Immediately raise menu prices by five percent
    2. Review overtime and scheduling records Correct answer.
    3. Eliminate all employee benefit programs
    4. Reduce all portion sizes by ten percent

    Explanation

    A labor overspend calls for diagnosing the cause, such as overtime, overstaffing, or scheduling inefficiency, before changing prices or benefits. Food cost is already favorable, so across-the-board portion cuts would not address the variance.

  173. Question 173Management of Food and Nutrition Systems

    Fixed costs are $60,000, the selling price per meal is $10, and variable cost per meal is $6. What is the break-even point in meals?

    1. 15,000 meals Correct answer.
    2. 10,000 meals
    3. 20,000 meals
    4. 6,000 meals

    Explanation

    Break-even in units equals fixed costs divided by contribution margin per unit. Here $60,000 ÷ ($10 − $6) = 15,000 meals. At that volume, total contribution covers fixed costs exactly.

  174. Question 174Management of Food and Nutrition Systems

    A kitchen produced 1,200 meals in 300 labor hours. After a workflow change, it produced 1,350 meals in the same 300 labor hours. What was the percentage increase in labor productivity?

    1. 12.5% Correct answer.
    2. 15.0%
    3. 11.1%
    4. 10.5%

    Explanation

    Productivity before the change was 1,200 ÷ 300 = 4.0 meals per hour and afterward 1,350 ÷ 300 = 4.5 meals per hour. The increase is (4.5 − 4.0) ÷ 4.0 = 0.125, or 12.5%.

  175. Question 175Management of Food and Nutrition Systems

    Budgeted revenue was $50,000 with food cost budgeted at 32%. Actual revenue was $52,000 and actual food cost was $17,500. What is the actual food cost percentage, and how does it compare with budget?

    1. 35.0%, unfavorable
    2. 33.7%, favorable
    3. 33.7%, unfavorable Correct answer.
    4. 32.0%, favorable

    Explanation

    Actual food cost percentage is $17,500 ÷ $52,000 = 0.337, or about 33.7%. Because the budget target was 32%, the actual percentage is higher and therefore unfavorable. Favorable would mean a lower percentage than budgeted.

  176. Question 176Management of Food and Nutrition Systems

    The number of subordinates who report directly to a single supervisor is known as the:

    1. span of control Correct answer.
    2. unity of command
    3. chain of command
    4. line authority

    Explanation

    Span of control describes how many employees report directly to one manager; a wide span creates a flatter structure and a narrow span adds layers of supervision. The other terms describe reporting relationships or authority, not the number of direct reports.

  177. Question 177Management of Food and Nutrition Systems

    A written statement that lists the duties, responsibilities, reporting relationships, and working conditions of a position is called a:

    1. job description Correct answer.
    2. job evaluation
    3. job analysis
    4. job specification

    Explanation

    A job description documents what the job entails, including duties and working conditions. A job specification instead states the qualifications the person must bring to the job.

  178. Question 178Management of Food and Nutrition Systems

    Which of the following is a variable cost in a hospital foodservice department?

    1. cost of raw food ingredients Correct answer.
    2. monthly rent for the cafeteria
    3. property insurance premiums
    4. depreciation of kitchen equipment

    Explanation

    Variable costs change in total in proportion to the volume of business; food is consumed in direct relation to the number of meals served. Depreciation, insurance, and rent are incurred regardless of volume and are fixed costs.

  179. Question 179Management of Food and Nutrition Systems

    The primary purpose of a standardized recipe is to:

    1. guarantee that the menu price covers all costs
    2. reduce the number of employees needed in production
    3. produce a consistent product and predictable yield Correct answer.
    4. allow cooks to substitute ingredients freely

    Explanation

    A standardized recipe specifies ingredients, quantities, procedures, and yield so the item turns out the same way every time and the number of portions is predictable. Consistency and known yield are what make it useful for costing, ordering, and production control.

  180. Question 180Management of Food and Nutrition Systems

    A menu that repeats a set sequence of daily menus over a defined period of days is called a:

    1. cycle menu Correct answer.
    2. à la carte menu
    3. static menu
    4. single-use menu

    Explanation

    A cycle menu repeats a fixed series of daily menus over a set number of days, which supports forecasting, purchasing, and production planning. A static menu offers the same items every day without a defined repeating cycle.

  181. Question 181Management of Food and Nutrition Systems

    Which document formally authorizes a supplier to ship a specified quantity of product at an agreed price?

    1. requisition
    2. credit memo
    3. purchase order Correct answer.
    4. invoice

    Explanation

    The purchase order is the buyer's written offer to purchase specified quantities at agreed prices and terms, and it authorizes the supplier to ship. It also becomes the reference document against which the delivery and invoice are checked.

  182. Question 182Management of Food and Nutrition Systems

    The management principle that each employee should be accountable to only one immediate supervisor is called:

    1. span of control
    2. division of labor
    3. unity of command Correct answer.
    4. delegation of authority

    Explanation

    Unity of command holds that a single supervisor prevents conflicting instructions and unclear accountability. Violations occur when, for example, a cook receives orders from both the production manager and the clinical manager.

  183. Question 183Management of Food and Nutrition Systems

    Under the Fair Labor Standards Act, non-exempt employees who work beyond 40 hours in a workweek must receive:

    1. compensatory time off in place of pay
    2. 1.5 times the regular rate for hours over 40 Correct answer.
    3. a shift differential for evening hours
    4. the regular hourly rate for every hour worked

    Explanation

    The FLSA requires overtime compensation of at least one and one-half times the employee's regular rate for hours worked beyond 40 in a workweek. Employers cannot substitute comp time for that overtime pay for non-exempt staff.

  184. Question 184Management of Food and Nutrition Systems

    A supervisor's rating of an employee is dominated by a serious error the employee made last week, even though performance earlier in the year was strong. This rating error is called:

    1. central tendency error
    2. recency error Correct answer.
    3. halo effect
    4. leniency error

    Explanation

    Recency error occurs when the most recent events are weighted disproportionately in an appraisal. Raters reduce it by keeping documented observations across the entire rating period rather than relying on memory.

  185. Question 185Management of Food and Nutrition Systems

    Before designing a training program for new trayline staff, the supervisor should first:

    1. conduct a needs assessment to identify gaps Correct answer.
    2. schedule sessions for all shifts
    3. select training videos and handouts
    4. evaluate trainees after the program

    Explanation

    Training design begins with a needs assessment that identifies the gap between required and actual performance. Content, methods, scheduling, and evaluation all follow from the specific gap that is documented.

  186. Question 186Management of Food and Nutrition Systems

    In ABC inventory classification, class A items are those that:

    1. are perishable and must be ordered daily
    2. are the least expensive items requiring little control
    3. account for most of the inventory value but few items Correct answer.
    4. are kept only for emergency use

    Explanation

    ABC classification sorts inventory by dollar usage. A items are the small proportion of items that account for most of the value and therefore receive the tightest control and most frequent review.

  187. Question 187Management of Food and Nutrition Systems

    Which is a disadvantage of centralized purchasing for a multi-unit foodservice system?

    1. Units lose flexibility in meeting local needs Correct answer.
    2. Purchasing records are duplicated at each unit
    3. Volume discounts are lost
    4. Standard specifications cannot be enforced

    Explanation

    Centralized purchasing gains volume discounts, uniform specifications, and consolidated records, but individual units may have less freedom to respond quickly to local product preferences or emergencies. Units can usually request exceptions, but the process adds time.

  188. Question 188Management of Food and Nutrition Systems

    To identify unnecessary steps and backtracking on a tray assembly line, the most useful tool is a:

    1. flow process chart Correct answer.
    2. Pareto chart
    3. Gantt chart
    4. balance sheet

    Explanation

    A flow process chart records each step, delay, and movement in a sequence so redundant steps and backtracking become visible. Work simplification then targets the non-value-adding elements for elimination or rearrangement.

  189. Question 189Management of Food and Nutrition Systems

    In management by objectives (MBO), performance goals are:

    1. set by top management and assigned downward
    2. reviewed only when an employee leaves
    3. set jointly by the supervisor and employee Correct answer.
    4. copied from published industry averages

    Explanation

    MBO is a participative process in which supervisor and employee agree on measurable objectives and then review progress against them at planned intervals. Joint goal setting is what distinguishes it from top-down target assignment.

  190. Question 190Management of Food and Nutrition Systems

    Which federal agency sets and enforces workplace safety and health standards in foodservice operations?

    1. Occupational Safety and Health Administration Correct answer.
    2. Environmental Protection Agency
    3. Food and Drug Administration
    4. US Department of Agriculture

    Explanation

    OSHA, within the Department of Labor, issues and enforces standards covering hazards such as slips, burns, machine guarding, and chemical exposure. FDA and USDA focus on food safety and labeling, and EPA regulates environmental matters.

  191. Question 191Management of Food and Nutrition Systems

    An operation that purchases mostly frozen, fully prepared entrées and only reheats and assembles them for service is best classified as which type of foodservice system?

    1. ready-prepared
    2. conventional
    3. assembly-serve Correct answer.
    4. commissary

    Explanation

    Assembly-serve (convenience) systems buy foods that are largely or fully prepared elsewhere and limit on-site work to assembly, reheating, and service. Conventional systems, by contrast, prepare foods from basic ingredients on the premises.

  192. Question 192Management of Food and Nutrition Systems

    A recipe calls for 10 pounds of cleaned, sliced carrots. If carrots have an 80% yield, how many pounds of raw carrots as purchased must be obtained?

    1. 10 pounds
    2. 8 pounds
    3. 12.5 pounds Correct answer.
    4. 15 pounds

    Explanation

    Divide the required edible portion by the yield percentage: 10 lb ÷ 0.80 = 12.5 lb of raw product as purchased. Yield percentages account for trim, peel, and other losses during preparation.

  193. Question 193Management of Food and Nutrition Systems

    A patient complains that the lunch tray arrived cold. The first step in resolving the complaint should be to:

    1. explain the tray delivery policy
    2. listen fully and document the details Correct answer.
    3. offer a meal voucher right away
    4. report the complaint to the director

    Explanation

    Service recovery begins with active listening and accurate documentation so the cause of the problem can be identified and corrected. Compensation and escalation follow only after the facts are known.

  194. Question 194Management of Food and Nutrition Systems

    Which action would most directly reduce overtime costs in a foodservice department?

    1. extending the serving period by 30 minutes
    2. scheduling more staff per shift
    3. cross-training staff to cover absences Correct answer.
    4. adding a second break to each shift

    Explanation

    Cross-training allows available employees to fill in for absent coworkers within their scheduled hours, reducing the need to hold others past 40 hours. Overtime arises mainly when coverage gaps are filled with extra hours from the same employees.

  195. Question 195Management of Food and Nutrition Systems

    Which practice best supports waste reduction in a hospital foodservice operation?

    1. discarding all leftovers at the end of each shift
    2. ordering in bulk without regard to shelf life
    3. tracking waste and adjusting batch sizes Correct answer.
    4. purchasing only single-serve, pre-portioned items

    Explanation

    Measuring waste by item and meal reveals where overproduction occurs, allowing cooks to reduce batch sizes and improve forecasting. Source reduction of this kind is preferred over disposal or recycling.

  196. Question 196Management of Food and Nutrition Systems

    A cafeteria has fixed costs of $80,000 per year, a selling price of $7.50 per meal, and variable cost of $4.50 per meal. How many meals must be sold to earn a profit of $20,000?

    1. 33,334 meals Correct answer.
    2. 50,000 meals
    3. 40,000 meals
    4. 26,667 meals

    Explanation

    Contribution margin per meal is $7.50 − $4.50 = $3.00. Required volume for a target profit is (fixed costs + target profit) ÷ contribution margin, or ($80,000 + $20,000) ÷ $3.00 ≈ 33,334 meals.

  197. Question 197Management of Food and Nutrition Systems

    In menu engineering, an item that has both high popularity and high contribution margin is classified as a:

    1. star Correct answer.
    2. dog
    3. puzzle
    4. plowhorse

    Explanation

    The menu engineering matrix combines popularity and contribution margin. Stars are high on both dimensions and are usually retained and promoted as they are.

  198. Question 198Management of Food and Nutrition Systems

    Checking trays for accuracy while they are being assembled is an example of which type of control?

    1. feedforward control
    2. budgetary control
    3. concurrent control Correct answer.
    4. feedback control

    Explanation

    Concurrent control acts on the process while work is happening, allowing immediate correction before the output reaches the customer. Feedforward control prevents problems before work begins, and feedback control evaluates results after completion.

  199. Question 199Management of Food and Nutrition Systems

    Benchmarking in foodservice management involves:

    1. auditing financial records for fraud
    2. comparing performance with best-practice operations Correct answer.
    3. surveying employee satisfaction once a year
    4. setting prices at the level charged by competitors

    Explanation

    Benchmarking measures an operation's processes and results against recognized high performers and uses the gap to set improvement targets. It is a structured comparison for learning, not a pricing or audit activity.

  200. Question 200Management of Food and Nutrition Systems

    Two ovens have different purchase prices and different annual operating costs over an expected service life of several years. Which method best accounts for the time value of money when comparing them?

    1. net present value Correct answer.
    2. first cost comparison
    3. simple rate of return
    4. payback period

    Explanation

    Net present value discounts all future cash flows to their present worth, so a higher purchase price can be weighed fairly against lower annual operating costs. Payback and first-cost methods ignore the timing of cash flows and the cost of capital.

CDR DTR flashcards

32 cards. Read the term and the definition here. The deck at the top of this page is optional.

Atwater factors
Carbohydrate and protein each provide 4 kcal per gram, fat provides 9 kcal per gram, and alcohol provides 7 kcal per gram; used to calculate food energy.
Protein RDA for adults
Healthy adults need 0.8 grams of protein per kilogram of body weight daily; needs rise with pregnancy, lactation, growth, and some illnesses.
Fat-soluble vitamins
Vitamins A, D, E, and K are absorbed with dietary fat, stored in liver and adipose tissue, and can accumulate to toxic levels with excess intake.
Water-soluble vitamins
B-complex vitamins and vitamin C dissolve in water, are largely excreted in urine rather than stored, and therefore require regular daily intake.
Glycemic index
A ranking of carbohydrate-containing foods by how much they raise blood glucose over about two hours compared with a reference food such as glucose.
AMDR for fat
Adults should obtain 20 to 35 percent of total daily calories from fat, according to the Acceptable Macronutrient Distribution Range.
Maillard reaction
A nonenzymatic browning reaction between amino acids and reducing sugars that develops brown color and flavor during baking, roasting, and frying.
Nutrient density
The amount of essential nutrients a food provides relative to its energy content; foods with more nutrients per calorie are more nutrient dense.
Nutrition Care Process steps
The four steps are nutrition assessment, nutrition diagnosis, nutrition intervention, and monitoring and evaluation; documentation often follows the ADIME format.
Body mass index formula
Body mass index equals weight in kilograms divided by height in meters squared; 25 to 29.9 is overweight and 30 or above is obese.
Hamwi ideal body weight
Quick estimate of ideal body weight: men 106 pounds for the first 5 feet plus 6 pounds per inch; women 100 pounds plus 5 pounds per inch.
Prealbumin versus albumin
Prealbumin has a half-life of about 2 to 3 days and reflects recent protein status; albumin's half-life is about 20 days and reflects longer-term status.
Clear liquid diet
Includes only transparent liquids such as broth, clear juice, gelatin, and tea; it leaves minimal residue and is used before procedures or when digestion must rest.
IDDSI framework
The International Dysphagia Diet Standardisation Initiative defines eight texture levels, 0 to 7, from thin liquids to regular foods, using validated fork and spoon tests.
Refeeding syndrome
A dangerous electrolyte shift after food is reintroduced to a malnourished person; phosphorus, potassium, and magnesium can drop sharply, so these are monitored and replaced.
Carbohydrate counting
A diabetes meal-planning method that totals grams of carbohydrate eaten; a common starting prescription is 45 to 60 grams per meal.
Temperature danger zone
The range from 41 F to 135 F (5 C to 57 C) in which bacteria multiply rapidly; cold foods are held at or below 41 F and hot foods at or above 135 F.
HACCP seven principles
Hazard analysis, determining critical control points, setting critical limits, monitoring, corrective actions, verification, and record keeping.
Two-stage cooling rule
Cool cooked food from 135 F to 70 F within two hours, then from 70 F to 41 F within four more hours, for six hours total.
Conventional foodservice system
Also called cook-serve; food is prepared and served on the same premises with little delay between production and service.
Commissary foodservice system
A central production kitchen prepares food that is transported to separate satellite units for final service; also called a central kitchen system.
FIFO rotation
First In, First Out: older stock is used before newer stock so that inventory is rotated and spoilage and waste are reduced.
Food cost percentage
Food cost divided by food sales, multiplied by 100; it shows the share of revenue spent on food and is used to monitor cost control.
Reheating temperature
Cooked food that is reheated for hot holding must reach 165 F (74 C) within two hours.
Maslow hierarchy of needs
Five levels of human needs, from physiological needs through safety, belonging, esteem, and self-actualization; lower needs generally must be satisfied first.
Herzberg two-factor theory
Hygiene factors such as pay and working conditions prevent dissatisfaction but do not motivate; motivators such as achievement and recognition produce satisfaction.
Break-even point
The volume at which revenue equals total cost, calculated as fixed costs divided by selling price per unit minus variable cost per unit.
Meals per labor hour
Total meals served divided by total productive labor hours; a standard productivity measure in foodservice operations.
FTE calculation
One full-time equivalent equals 40 paid hours per week; divide total paid hours by 40 to convert to FTE count.
Democratic leadership
A style in which the leader seeks staff input and shares decision making, while retaining accountability for the final outcome.
Capital budget
A plan for major long-term expenditures such as equipment and facility projects, typically with a useful life beyond one year.
Employee turnover rate
Separations divided by the average number of employees, multiplied by 100, over a stated period such as a year.

CDR DTR study guide

Food and Nutrition Sciences

Macronutrients and energy

Digestion, absorption, and metabolism of carbohydrate, protein, and fat anchor this domain. Memorize Atwater factors: carbohydrate 4 kcal/g, protein 4 kcal/g, fat 9 kcal/g, alcohol 7 kcal/g. Questions often bait alcohol as 9 kcal/g or protein as 4.2-both wrong. Know that fiber yields little usable energy in humans, that a maintenance protein estimate is about 0.8 g/kg, and that needs rise with catabolic stress (roughly 1.2–1.5 g/kg).

Micronutrients and bioavailability

Fat-soluble vitamins (A, D, E, K) require bile and dietary fat, are stored in the body, and carry toxicity risk. Water-soluble vitamins are excreted more readily, but B12 requires intrinsic factor, and high folate intake can mask B12 deficiency. Heme iron is absorbed far better than non-heme iron; vitamin C enhances non-heme absorption, while phytates, oxalates, tannins, and calcium inhibit it.

Food science and safety

Distinguish Maillard browning (reducing sugar plus amino group, dry heat) from caramelization (sugar alone). Starch gelatinizes with heat and water; proteins denature and coagulate. Microbial growth depends on moisture (water activity), pH (C. botulinum will not grow below pH 4.6), temperature, time, oxygen, and nutrients. The temperature danger zone is 41–135°F.

Trap to expect

Freezing is bacteriostatic, not bactericidal-it halts growth but does not sterilize food, and thawed food can spoil as if never frozen.

Rule of thumb

To check energy quickly, multiply grams by the Atwater factor: a snack with 30 g carbohydrate, 10 g protein, and 5 g fat supplies 120 + 40 + 45 = 205 kcal.

Nutrition Care for Individuals and Groups

The Nutrition Care Process

Use the four NCP steps in order: nutrition assessment, nutrition diagnosis (written as a PES statement-Problem, Etiology, Signs/Symptoms), intervention, and monitoring/evaluation. Screening comes before assessment: screening is a brief, validated risk check any trained staff member can complete, while assessment is a comprehensive review done by the RDN or the DTR under supervision. A frequent distractor swaps these two roles.

Assessment data

Organize findings as anthropometric, biochemical, clinical, and dietary (the “ABCDs”), plus food and nutrition history, medication and supplement use, and psychosocial and economic factors. Percent weight change over time, usual body weight, and edema status drive many interpretations.

DRI terms

EAR assesses adequacy of groups; RDA covers about 97–98% of individuals; AI is used when an EAR cannot be set; UL flags toxicity risk; AMDR gives acceptable macronutrient ranges.

Interventions and education

“If the gut works, use it”-enteral nutrition is preferred over parenteral when the GI tract functions. Know the stages-of-change model (precontemplation through maintenance) and use teach-back to verify learning, writing materials at roughly a sixth-grade reading level.

Traps

Do not confuse the DTR's implementation role with diagnosing or prescribing, and do not substitute headcount for assessment data when calculating needs.

Worked example

A 1.2 kcal/mL formula delivered at 1,200 mL/day supplies 1.2 × 1,200 = 1,440 kcal; at 50 g protein per liter, that is 0.05 × 1,200 = 60 g protein. Always multiply concentration by volume.

Foodservice Systems

Production systems

Know four systems and their trade-offs. Conventional (cook-serve) produces and serves on site-high labor, short holding time. Ready-prepared (cook-chill or cook-freeze) produces ahead and reheats, trading labor for equipment and energy. Commissary is a central production kitchen shipping to satellite serving sites. Assembly-serve buys mostly prepared items and only assembles them, minimizing skilled labor but raising food cost.

Food flow and HACCP

The flow is purchasing, receiving, storage, pre-preparation, production, holding, service, and disposal. HACCP has seven principles: conduct hazard analysis, determine critical control points, set critical limits, monitor, take corrective action, verify, and keep records. HACCP is a preventive process-control system, not a cleaning schedule-a classic distractor.

Temperatures

Hold cold food at 41°F or below and hot food at 135°F or above. Cook poultry to 165°F, ground meat to 155°F, and whole muscle to 145°F. Cool from 135°F to 70°F within 2 hours, then to 41°F within 4 additional hours. Reheat to 165°F within 2 hours.

Forecasting and standardization

Forecast from production sheets, census patterns, and historical data rather than guessing, and use standardized recipes so quality and cost stay consistent. Track yield percentage whenever trimming or cooking loss occurs.

Worked example

A standardized recipe yields 50 portions but 180 are needed, so the conversion factor is 180 ÷ 50 = 3.6. Multiply every ingredient by 3.6, then adjust seasoning cautiously because salt and spices do not always scale linearly.

Management of Food and Nutrition Systems

Functions and styles

Expect questions on the management functions-planning, organizing, staffing, directing, coordinating, reporting, and budgeting-plus leadership styles: autocratic, democratic, laissez-faire, situational, and transformational. Autocratic leadership is not automatically wrong; it suits emergencies and untrained staff. Know the difference between a job description (duties) and a job specification (qualifications), and the sequence of recruitment, selection, orientation, training, and performance appraisal.

Staffing math

One FTE equals 40 hours per week, or 2,080 hours per year. Headcount and FTE are not the same: three employees each scheduled 20 hours per week equal 60 ÷ 40 = 1.5 FTE. Productivity is commonly measured as meals per labor hour (MPLH) = meals served ÷ labor hours. Labor cost percentage = labor cost ÷ revenue. Variance = actual minus budget, and a cost below budget is favorable.

Budgets and quality

Operating budgets cover recurring expenses; capital budgets cover major equipment and construction. Quality improvement tools include PDSA cycles, benchmarking, root cause analysis, and Six Sigma; tray accuracy, customer satisfaction, and meal temperature at service are typical indicators.

Traps

Distinguish productivity (output per labor hour) from efficiency and from simple staffing ratios, and read carefully whether the question wants total labor cost or labor cost as a percent of revenue.

Rule of thumb

Before comparing staff to a budgeted position count, convert scheduled hours to FTE by dividing total weekly hours by 40. Example: 900 meals divided by 75 labor hours equals 12 meals per labor hour.

CDR DTR cheat sheet

Quick reference

Food and Nutrition Sciences

  • Energy values: carbohydrate 4 kcal/g, protein 4 kcal/g, fat 9 kcal/g, alcohol 7 kcal/g.

  • Adult AMDR: carbohydrate 45-65%, fat 20-35%, protein 10-35% of total energy.

  • Protein RDA for healthy adults is 0.8 g/kg body weight per day.

  • DRI categories: EAR (group assessment), RDA (covers 97-98% of individuals), AI (used when an RDA cannot be set), UL (highest intake unlikely to cause harm).

  • Fiber recommendation is 14 g per 1000 kcal, roughly 25 g/day for women and 38 g/day for men.

  • Fat-soluble vitamins A, D, E, K are stored in liver and adipose tissue; water-soluble B vitamins and C are excreted and need frequent intake.

  • Digestion sequence: salivary amylase begins starch breakdown, pepsin (activated by stomach acid) digests protein, and pancreatic lipase plus bile emulsify and digest fat in the small intestine.

  • Heat-labile nutrients include vitamin C and thiamin; riboflavin is destroyed by light.

  • Maillard browning involves amino acids plus reducing sugars under dry heat; caramelization involves sugars alone.

Quick reference

Nutrition Care for Individuals and Groups

  • Nutrition Care Process order: assessment -> nutrition diagnosis (PES statement) -> intervention -> monitoring and evaluation.

  • BMI = weight (kg) / height (m)^2; underweight <18.5, normal 18.5-24.9, overweight 25-29.9, obese 30 or greater.

  • Hamwi ideal body weight: men 106 lb for first 5 ft + 6 lb per inch; women 100 lb for first 5 ft + 5 lb per inch; acceptable range plus or minus 10%.

  • Percent weight change = (usual weight - current weight) / usual weight x 100; loss over 5% in 1 month or 10% in 6 months indicates nutrition risk.

  • Albumin half-life is about 20 days (longer-term status); prealbumin half-life is about 2-3 days (reflects acute change).

  • Diet progression for tolerance: clear liquid -> full liquid -> mechanical soft -> regular; pureed textures are used for dysphagia.

  • IDDSI uses eight levels: 0-4 for liquids (thin to extremely thick) and 3-7 for foods (liquidized to regular).

  • Refeeding risk: begin at a reduced rate (about 10-20 kcal/kg) and monitor and replace phosphorus, potassium, and magnesium.

  • Diabetes meal planning: carbohydrate counting with a common starting prescription of 45-60 g carbohydrate per meal.

Quick reference

Foodservice Systems

  • Temperature danger zone is 41-135 F (5-57 C); cold holding at or below 41 F, hot holding at or above 135 F.

  • Two-stage cooling: 135 F to 70 F within 2 hours, then 70 F to 41 F within 4 more hours (6 hours total).

  • Reheating for hot holding must reach 165 F within 2 hours.

  • HACCP seven principles in order: hazard analysis, determine CCPs, set critical limits, monitor, take corrective actions, verify, keep records.

  • Foodservice systems: conventional (cook-serve), commissary (central kitchen plus satellites), ready-prepared (cook-chill/cook-freeze), assembly-serve.

  • Food cost percentage = food cost / food sales x 100.

  • Stock rotation uses FIFO (first in, first out); receive refrigerated food at 41 F or below and frozen food at 0 F or below.

  • Menu types: static, single-use, cycle (repeats on a set schedule), and selective (offers multiple choices).

Quick reference

Management of Food and Nutrition Systems

  • Management functions: planning, organizing, staffing, directing, controlling.

  • Break-even units = fixed costs / (selling price per unit - variable cost per unit).

  • FTE = total paid hours / 40; meals per labor hour = meals served / productive labor hours.

  • Turnover rate = separations / average number of employees x 100.

  • Herzberg two-factor theory: hygiene factors (pay, conditions) prevent dissatisfaction; motivators (achievement, recognition) create satisfaction.

  • McGregor Theory X assumes workers dislike work and need close supervision; Theory Y assumes workers seek responsibility and self-direction.

  • Fixed costs do not change with volume (rent, insurance); variable costs change with volume (food, hourly labor).

  • Labor cost percentage = labor cost / total sales x 100.

  • Budget types: operating (annual day-to-day expenses) versus capital (long-term equipment and facility projects).

CDR DTR key terms

Basal metabolic rate

The energy the body uses at rest to keep vital functions going, measured while awake, fasting, and comfortable; it is usually the largest part of daily energy needs.

Bioavailability

The share of a nutrient eaten that is absorbed and can be used by the body; it depends on food form, other foods eaten, and the person's health.

Related: Essential amino acids
Essential amino acids

The nine amino acids the body cannot make in sufficient amounts and must get from food; missing any one limits protein building.

Related: Complementary proteins
Complementary proteins

Two or more plant foods whose amino acid patterns make up for each other's shortages when eaten together, providing a complete protein similar to animal sources.

Related: Essential amino acids
Glycemic index

A ranking of carbohydrate foods by how much they raise blood glucose two hours after a set portion is eaten, compared with a standard food.

Related: Carbohydrate counting
Dietary Reference Intakes

A set of nutrient reference values, including EAR, RDA, AI, UL, and AMDR, used to plan and assess diets of healthy people in specific age and sex groups.

Related: Tolerable Upper Intake Level
Tolerable Upper Intake Level

The highest average daily nutrient intake that is unlikely to cause harmful effects in almost all people in a defined group; intakes above it carry risk.

Related: Dietary Reference Intakes
Maillard reaction

A browning reaction between sugars and amino groups that occurs when foods are heated, creating brown color and savory flavors while reducing some available lysine.

Nutrition Care Process

A four-step problem-solving framework for dietetics work: nutrition assessment, nutrition diagnosis, nutrition intervention, and nutrition monitoring and evaluation.

Related: ADIME, Nutrition diagnosis
ADIME

A charting format that organizes notes as Assessment, Diagnosis, Intervention, and Monitoring/Evaluation, matching the steps of the Nutrition Care Process.

Related: Nutrition Care Process
Nutrition diagnosis

A clear statement of a nutrition problem that dietetics practitioners can treat, identified from assessment data and written in a standard problem-etiology-signs format.

Related: PES statement
PES statement

The three-part wording of a nutrition diagnosis: Problem, Etiology, and Signs/Symptoms, joined by 'related to' and 'as evidenced by' to show cause and proof.

Related: Nutrition diagnosis
Anthropometric measures

Body measurements such as height, weight, waist circumference, and skinfolds that are compared with standards to judge growth, body composition, and nutritional status.

Related: Body mass index
Body mass index

A screening number found by dividing weight in kilograms by height in meters squared; it estimates weight status but not body fat directly.

Related: Anthropometric measures
24-hour recall

A dietary assessment in which the client lists everything eaten and drunk in the past 24 hours; it is quick but may not reflect usual intake.

Dysphagia

Difficulty swallowing that can lead to choking or aspiration; managed with texture-modified foods and thickened liquids chosen after a swallowing evaluation.

Related: NPO
Enteral nutrition

Feeding liquid formula through a tube into the stomach or intestine when a person cannot eat enough by mouth but the digestive tract still works.

Related: Parenteral nutrition
Parenteral nutrition

Delivering nutrients directly into a vein, bypassing the digestive tract, for people who cannot absorb or safely use tube or oral feedings.

Related: Enteral nutrition
NPO

A medical order meaning 'nothing by mouth'; no food, fluids, or oral medications are given, often before surgery or when swallowing is unsafe.

Related: Dysphagia
Carbohydrate counting

A meal-planning method that adds up grams of carbohydrate eaten at meals and snacks so insulin or other treatment can be matched to intake.

Related: Glycemic index, Hemoglobin A1c
Hemoglobin A1c

A blood test showing the percentage of hemoglobin coated with glucose, which reflects average blood glucose over the past two to three months.

Related: Carbohydrate counting
HACCP

A preventive food safety system that identifies biological, chemical, and physical hazards and sets controls at points critical to keeping food safe.

Related: Critical control point
Critical control point

A step in food production where a control measure must be applied to prevent, remove, or lower a safety hazard to an acceptable level.

Related: HACCP
Temperature danger zone

The temperature range of roughly 41 to 135 degrees Fahrenheit (5 to 57 degrees Celsius) where bacteria multiply fastest; perishable foods should spend little time there.

Related: Time/temperature control for safety foods
Time/temperature control for safety foods

Foods that need time or temperature control to stop pathogen growth, such as meat, poultry, dairy, cooked rice, and cut melons.

Related: Temperature danger zone
Cross-contamination

The movement of harmful germs from one food, surface, or utensil to another, often through hands, cutting boards, or dripping juices.

Related: HACCP
Standardized recipe

A recipe that states exact ingredients, preparation steps, yield, portion size, and equipment so the same product and cost result every time.

Related: Yield
Yield

The usable amount of food left after trimming, cooking, or other losses; it is used to adjust how much raw food must be purchased.

Related: Standardized recipe
FIFO

An inventory rule meaning first in, first out: older stock is used before newer stock to cut spoilage, waste, and expired products.

Related: Inventory turnover
Full-time equivalent

A staffing measure where one full-time equivalent equals one full-time worker's hours, usually 40 per week; part-time hours are added and divided by that total.

Related: Productivity
Labor cost percentage

Labor expense divided by revenue and multiplied by 100; it shows how much of each sales dollar goes to wages and related costs.

Related: Variance
Variance

The difference between a budgeted amount and the actual amount; it is favorable when costs are below budget or revenue is above budget.

Related: Labor cost percentage
Productivity

Output divided by input, such as meals served per paid labor hour; it measures how efficiently staff and resources produce results.

Related: Full-time equivalent
Performance appraisal

A planned, periodic review of an employee's work against job standards, used to give feedback, set goals, and support pay or promotion decisions.

Related: Delegation
Delegation

Assigning a task and the authority to do it to a trained employee while the delegator keeps accountability for the result.

Related: Performance appraisal
Inventory turnover

Cost of food used divided by average inventory value; it shows how many times stock is replaced in a period and helps spot overstocking.

Related: FIFO

CDR DTR study plan

8 weeks · About 7 hours per week

Week 1

Food and Nutrition Sciences

  • Define digestion, absorption, and transport mechanisms for each macronutrient and trace the pathway from ingestion to cellular use

  • Calculate energy needs using Mifflin-St Jeor, Harris-Benedict, and indirect calorimetry values, then compare the three outputs for the same case

  • Explain glycolysis, TCA cycle, gluconeogenesis, lipolysis, and ketogenesis and state the hormonal triggers for each

  • Differentiate fiber types, glycemic response, protein quality measures (PDCAAS, DIAAS), and lipid classification by structure

  • Draw a one-page metabolic map linking fed-state and fasted-state pathways

Your checkpoint

Completed one-page hand-drawn metabolic map plus a 30-item self-quiz on macronutrient science scored and logged with corrections

Week 2

Food and Nutrition Sciences

  • Tabulate the function, deficiency signs, toxicity risk, and key food sources for 20 vitamins and minerals

  • Interpret water and electrolyte balance, acid-base relationships, and hydration assessment indicators

  • Identify nutrient-drug and nutrient-nutrient interactions for at least 12 common medication classes

  • Apply food science principles (Maillard browning, emulsification, pH effects, freezing/thawing) to predict nutrient retention and quality changes

  • Solve stoichiometry-style problems converting food composition data into nutrient intake values

Your checkpoint

A 25-row nutrient reference table (function, deficiency, toxicity, source) built from memory first, then verified and corrected

Week 3

Nutrition Care for Individuals and Groups

  • Apply the nutrition care process: assess, diagnose (write PES statements), intervene, monitor, and evaluate for 5 short vignettes

  • Interpret anthropometrics, biochemical indices, clinical signs, and dietary intake data to prioritize nutrition problems

  • Compare nutrient needs across the lifecycle (pregnancy, lactation, infancy, childhood, adolescence, older adulthood)

  • Write 10 correctly formatted PES diagnostic statements using approved terminology

  • Select and justify the appropriate malnutrition screening and assessment tool for a given setting

Your checkpoint

Ten PES statements written from vignettes, self-scored against an accuracy checklist at 90% or better

Week 4

Food and Nutrition Sciences & Nutrition Care for Individuals and Groups

  • Construct medical nutrition therapy plans for diabetes, cardiovascular disease, chronic kidney disease, and obesity using current evidence-based recommendations

  • Differentiate enteral and parenteral nutrition indications, formula selection, delivery routes, and complication monitoring

  • Apply behavior-change and counseling frameworks to build a realistic client education plan

  • Calculate tube feeding and TPN orders including goal rate, water flushes, and macronutrient distribution

  • Identify refeeding syndrome risk factors and outline monitoring parameters

Your checkpoint

Three complete written case studies (assessment through evaluation) plus a timed 40-question Domain 1 and 2 practice test with a written error analysis

Week 5

Foodservice Systems

  • Compare conventional, commissary, ready-prepared, and assembly-serve production systems on cost, labor, and quality tradeoffs

  • Build a HACCP plan with hazard analysis, critical control points, critical limits, monitoring, and corrective actions for one menu item

  • Apply food safety time-temperature standards, foodborne pathogen characteristics, and sanitation procedures to inspection scenarios

  • Calculate recipe yield, conversion factors, and portion cost for a standardized recipe

  • Evaluate equipment selection and layout decisions for workflow efficiency and energy use

Your checkpoint

A complete HACCP plan for a single high-risk menu item, including flow diagram, CCPs, limits, monitoring log, and corrective actions

Week 6

Management of Food and Nutrition Systems

  • Distinguish management functions, leadership styles, and motivational theories and match each to a workplace scenario

  • Draft a department operating budget with labor, food, and supply line items and compute variances from actuals

  • Apply human resource processes: recruitment, orientation, performance appraisal, discipline, and union/labor considerations

  • Design a quality improvement and customer satisfaction measurement approach for a foodservice operation

  • Compare regulatory, accreditation, and reimbursement requirements affecting nutrition services

Your checkpoint

A one-department operating budget with a written variance analysis of at least three line items and recommended corrective actions

Week 7

Food and Nutrition Sciences & Nutrition Care for Individuals and Groups & Foodservice Systems & Management of Food and Nutrition Systems

  • Complete a full-length timed mock examination under test-day conditions with no reference materials

  • Score by domain and rank weakest to strongest performance areas

  • Re-teach the two lowest-scoring content areas using targeted study blocks and new practice items

  • Build a personal error log categorizing misses as knowledge gap, misread question, or calculation error

  • Rehearse calculation set: energy needs, IBW, tube feeding, recipe yield, and budget variance under time pressure

Your checkpoint

Full mock exam score report by domain plus a categorized error log naming the top three recurring failure patterns

Week 8

Nutrition Care for Individuals and Groups & Management of Food and Nutrition Systems

  • Retarget the highest-yield weak areas identified in the error log with focused review and spaced retrieval practice

  • Answer 50 mixed rapid-fire items daily and review every rationale, right or wrong

  • Condense each domain into a single review sheet limited to facts you have personally missed

  • Simulate exam-day logistics: timing strategy, break planning, and question-flagging rules

  • Complete a final timed mock exam and verify performance is at or above target

Your checkpoint

Four one-page domain review sheets built only from personal missed items, plus a final timed mock exam scored at 80% or higher

Milestones

Week 2: Score 80% or better on a 30-item Domain 1 science quiz and confirm the nutrient reference table is complete with all corrections noted

Week 4: Complete all three case studies and score 75% or better on a timed 40-question Domain 1 and 2 practice test

Week 6: Submit the HACCP plan and operating budget deliverables, and score 75% or better on a 30-question Domain 3 and 4 practice test

Week 7: Finish the full-length timed mock exam and produce a domain-by-domain score report with three named weak areas

Week 8: Score 80% or higher on the final timed mock exam and confirm all four one-page review sheets are complete

CDR DTR exam day

Your checklist

Government-issued photo ID with your signature

The name on your ID must match the name in your CDR record exactly. Check the current CDR/Pearson VUE candidate handbook for the list of accepted ID forms and whether a second form of ID is required.

Appointment confirmation / authorization to test

Bring your appointment confirmation (printed or digital) and note your authorization-to-test number and appointment time so you can check in without delay.

Test center logistics

Write down the address, parking situation, and travel time. A dry run or a mapped route the day before removes morning-of guesswork.

Current CDR candidate handbook details

Confirm before test day: total number of items, testing time, break policy, ID policy, and how results are reported. These specifics change and should not be assumed.

Arrival plan with buffer

Plan to arrive at the testing center well before your appointment time (many centers recommend roughly 30 minutes) and confirm that recommended arrival window with the provider.

Nothing prohibited on your person

Leave phones, smartwatches, fitness trackers, notes, and study materials at home or in the car. Expect to use a provided locker for personal items.

Comfortable layers

Testing rooms are often cool and you will be seated for a long stretch; a light layer you can remove is safer than a single heavy outfit.

Glasses or contacts if you use them

Bring what you normally wear for screen reading, plus any medication you may need during the appointment after confirming the center's policy on bringing it in.

Snack and water for before/after

Eat a normal meal beforehand. Whether food or drink is allowed inside the testing room varies, so confirm the center's policy rather than assuming.

Calculator and scratch materials policy

Confirm in advance whether an on-screen calculator and scratch/dry-erase materials are provided at the workstation or whether you may bring your own approved items. Do not assume either way.

Review of the Code of Ethics for the Nutrition and Dietetics Profession

A light read-through the day before helps with items framed around professional conduct, scope of practice, and confidentiality.

Sleep and nutrition plan

Protect 7-8 hours of sleep for the two nights before. Do not plan an all-night cram session; fatigue costs more points than one extra hour of review gains.

Plan the day

72 hours before

Confirm the appointment time and location, verify that your ID name matches your CDR record exactly, and re-read the handbook sections on ID, breaks, and scoring. Resolve any discrepancy with the provider now, not at check-in.

72 hours before

Take one timed practice set under realistic conditions (same time of day, no phone, no pauses) to rehearse pacing and to identify the two or three domains still costing you the most points.

72 hours before

Shift from new content to consolidation: review your own notes, formulas, and food-service/management concepts you have already studied. Stop opening new resources.

48 hours before

Do targeted review of your weakest areas only. Cap study sessions at about 60-90 minutes with real breaks, and stop studying by early evening.

48 hours before

Start shifting your sleep schedule toward the wake-up time you will need on test day.

24 hours before

Pack your bag: ID, appointment confirmation, glasses, layers, snack. Confirm your route and leave time, and check for any travel or weather issues.

24 hours before

Do a short, gentle review (30-45 minutes) of summary sheets only. No new topics, no full-length practice test. Eat a normal dinner and go to bed at a reasonable hour.

Morning of

Eat a normal breakfast, hydrate, and leave with enough buffer to arrive early. Do not study in the car or lobby; last-minute cramming tends to increase anxiety.

At check-in

Present your ID and confirmation, store personal items in the locker, and follow the test administrator's sign-in and security instructions exactly.

During the test

Read the full instructions and confirm the item count and time remaining before you start. Read each question completely, including qualifiers such as 'first,' 'best,' and 'except.'

During the test

Answer every item. If a question is consuming too much time, flag it and move on; return to flagged items after you have secured the easier points. Confirm with the provider whether unanswered items are scored as incorrect.

During the test

If a break is offered, confirm whether the clock stops. Use scheduled breaks to stand, hydrate, and reset rather than to review content.

After the test

Follow the center's procedure for receiving your result and keep any paperwork. Confirm with CDR how and when official results are issued before you leave.

Rules to check

  • Your ID must be current, government-issued, and show a name that exactly matches your CDR record. If your name has changed, resolve the discrepancy with the provider before test day.

  • Electronic devices, notes, and study materials are not permitted in the testing room. Unauthorized items can lead to your session being terminated or your score being voided.

  • Arrive before your appointment time. Candidates who arrive late may be denied entry and may forfeit their fee; confirm the exact cutoff with the provider rather than assuming a grace period.

  • Follow all instructions from the test administrator and complete any confidentiality agreement honestly. You are bound not to disclose, discuss, or reproduce exam content afterward.

  • Breaks are governed by the provider's policy. Confirm in advance whether breaks are scheduled, whether the clock stops during them, and how unscheduled breaks affect your remaining time.

  • Scoring is criterion-referenced against a passing standard set through CDR's standard-setting process; you are not competing against other candidates, and a fixed percentage correct is not published. Confirm the current passing scaled score and score-report format in the handbook.

  • Retake eligibility, waiting periods, and fees are set by CDR and change over time. Confirm the current policy with the provider before you need it.

CDR DTR FAQ

How many CDR DTR practice questions are available?

The practice set has 200 CDR DTR questions. Each one includes the choices, the correct answer, and an explanation, and the set is free to read with no signup.

How many CDR DTR flashcards are available?

The flashcard set has 32 CDR DTR cards. Each card shows the term and its definition.

Which topics does the CDR DTR study material cover?

The CDR DTR study material has 4 sections, including Food and Nutrition Sciences, Nutrition Care for Individuals and Groups, and Foodservice Systems.

What format facts does the catalog list for the CDR DTR exam?

The catalog lists these item types: multiple choice and computer-based delivery at approved testing centers or via live remote proctoring for the CDR DTR exam.