RBT Practice Test

Registered Behavior Technician (RBT) Examination

RBT overview

  • 200 practice questions
  • 32 flashcards
  • 6 study guide topics
  • 40 key terms

What you'll study

  • Measurement17%
  • Assessment17%
  • Skill Acquisition17%
  • Behavior Reduction17%
  • Documentation and Reporting16%
  • Professional Conduct and Ethics16%

The Registered Behavior Technician® (RBT®) certification is a paraprofessional credential in behavior analysis issued by the Behavior Analyst Certification Board (BACB). RBTs assist in delivering behavior-analytic services and practice under the direction and close supervision of an RBT Supervisor and/or an RBT Requirements Coordinator who is responsible for their work. The credential is intended for technicians who carry out direct, hands-on implementation of behavior plans written and overseen by a qualified supervisor, rather than for independent practice. Because RBTs are the people most often delivering day-to-day instruction and data collection, exam content is built around practical fieldwork: measuring behavior accurately, conducting and assisting with assessments, teaching new skills, reducing challenging behavior, documenting and reporting what happened, and behaving ethically under the RBT Ethics Code (2.0). To prepare, start with the official RBT Handbook, which the BACB lists as updated June 29, 2026, and review the RBT Ethics Code (2.0) and the Recent and Upcoming Changes to BACB Requirements page. The BACB also directs candidates to the 2026 RBT Requirements Changes, the Guidance for Meeting RBT Requirements During the 2026 Transition, the In-Service Training Requirements page, and the December 2023 BACB Newsletter for details on new requirements and the 2026 exam. Pair that reading with supervised practice and fluency drills on measurement and documentation.

Common mistakes

Computes interobserver agreement with the wrong formula for the method named in the question - e.g., dividing agreements by the number of intervals when the scenario describes total-count IOA, or reporting occurrence-only agreement as if it were trial-by-trial IOA.

Candidates memorize the phrase 'agreements divided by total times 100' without attaching it to a specific IOA method, and under time pressure they grab the first formula that comes to mind instead of the one the item specifies.

What to do instead

Before calculating, write down what is being compared: counts (smaller total divided by larger total), intervals (agreements divided by total intervals), or trials (agreements divided by total trials). Then multiply by 100 and check that the answer is between 0% and 100%.

Selects a measurement procedure that does not match what the question says the data are needed for - for example, choosing partial-interval recording when the item asks for the exact number of times a behavior occurred, or choosing frequency for a behavior with no clear onset and offset such as pacing.

Definitions of continuous and discontinuous measurement are memorized as vocabulary rather than as answers to the question 'what information does this method give you?' So any method whose name sounds like 'recording' gets chosen.

What to do instead

Read the stem and state the required output in one word first - count, duration, latency, or estimate. Then pick the method that produces that output: event recording for count, duration recording for time, latency for time to onset, whole/partial interval or momentary time sampling only when an estimate of occurrence across time is acceptable.

Mistakes one preference assessment for another - labeling a free-operant observation as a paired-stimulus or forced-choice assessment, or calling a multiple-stimulus-without-replacement probe a 'free operant' because the client 'freely chose' an item.

The names are learned as a list rather than as descriptions of the arrangement, and the phrase 'the client chose' appears in several procedures, which triggers the wrong label.

What to do instead

Identify two features in the stem before answering: how many items are available at a time (one pair, an array, or the whole environment) and whether access is contingent on a selection or just observed. Two items at a time means forced choice; an array presented repeatedly with selected items removed means MSWO; observation with no structured trials means free operant.

Confuses indirect and descriptive assessment with experimental functional analysis - for example, choosing 'functional analysis' for an item that describes caregiver interviews, record review, and scatterplot data, or choosing 'indirect assessment' for an item where a therapist systematically manipulates antecedents and consequences.

All three are filed under 'figuring out the function,' and candidates answer based on the words 'function' or 'assessment' rather than on whether the variables were observed, reported, or manipulated.

What to do instead

Scan the stem for the verb describing what was done. If someone was asked or records were read, it is indirect. If behavior was watched in the natural setting with no manipulation, it is descriptive. If conditions were arranged and compared, it is a functional analysis.

Reverses chaining procedures - describing forward chaining when the learner is taught the final step first while the trainer completes all earlier steps, or describing backward chaining as starting from the beginning of the task analysis.

Both procedures are taught as 'chaining' and the direction word is treated as a label rather than as a description of which step the learner performs independently.

What to do instead

Ask one question: which step does the learner do on his own in the first teaching session? First step independently with the rest prompted means forward chaining; last step independently with earlier steps done for him means backward chaining.

Mixes up prompt-fading strategies or prompt types - calling a least-to-most sequence 'most-to-least' because the prompt got stronger, confusing a gestural prompt with a model, or describing time delay as a fading procedure when the stem describes adding a prompt after the instruction with a gradually increasing wait.

Prompt terms are learned as a vocabulary list, and the directionality of 'least' and 'most' is easy to invert under pressure, especially when the stem describes the prompt changing across trials.

What to do instead

Draw the sequence on scratch paper as a ladder: write the prompt level used on trial one and on the last trial, then check whether it moved up or down. For time delay, confirm the stem mentions a wait interval before the prompt rather than a change in prompt strength.

Chooses the wrong differential reinforcement procedure - answering DRO when the stem reinforces a specified alternative behavior, DRI when the stem reinforces a lower rate of the same behavior, or DRA when the stem reinforces behavior that cannot occur at the same time as the target.

The four acronyms differ by one letter and are recalled as a set, so candidates match on the word 'differential' or on the general idea of 'reinforcing something else.'

What to do instead

Name exactly what is being reinforced in the stem. Reinforcing a specific alternative behavior is DRA; reinforcing a behavior physically incompatible with the target is DRI; reinforcing the absence of the target for an interval is DRO; reinforcing a reduced rate of the same target is DRL.

Recommends abandoning or altering an extinction procedure when the client shows a temporary increase in response intensity, or selects punishment-based procedures as the default first step because the behavior is dangerous or disruptive.

The extinction burst looks like treatment failure in a written scenario, and candidates are drawn to the answer that makes the discomfort stop rather than the answer that is technically correct.

What to do instead

Treat an increase in rate, intensity, or variety at the start of extinction as an expected and temporary effect: the correct action is to continue implementing the plan as written and report the change to the supervising behavior analyst. For any question asking for a first intervention, prefer reinforcement-based strategies and reserve punishment for items that state less intrusive options have failed.

Records data with subjective or interpretive language ('was frustrated,' 'had a bad day,' 'acted out') and reconstructs session data at the end of the shift from memory rather than recording at the time of occurrence.

Narrative charting habits from other fields carry over, and end-of-shift data entry feels efficient when sessions are busy, so the numbers get estimated after the fact.

What to do instead

Write only what a camera could capture: observable actions, quoted statements, and measurable values with the time and setting. Record each response as it occurs or immediately after the trial, and if data are missed, note the gap honestly rather than filling it in later.

Accepts a request outside the RBT role - revising a behavior intervention plan, changing reinforcement schedules, or answering a parent's clinical question with advice - or discusses a client by name in a public place or on social media.

The desire to be helpful and the closeness of in-home and school settings blur role boundaries, and confidentiality lapses usually happen in casual moments rather than deliberate ones.

What to do instead

When a decision requires clinical judgment, implement the plan as written and route the request to the supervising behavior analyst with a factual report of what was observed. Share client information only with those who need it for service delivery, and use initials or a client code in any message that leaves the file.

Exam requirements can change. Confirm current details with the exam provider.

RBT practice

200 questions. Each one lists the choices, the correct answer, and an explanation. With JavaScript, this list opens one question at a time. The checker at the top of this page saves progress in this browser when it is available.

  1. Question 1Measurement

    A teacher wants to know how many times a student leaves their seat during a 30-minute lesson. Which measurement procedure is most appropriate?

    1. Momentary time sampling at 5-minute marks
    2. Event recording of each occurrence Correct answer.
    3. Duration recording of each occurrence
    4. Latency recording from lesson start

    Explanation

    Event recording (frequency counting) tallies each instance of a discrete behavior and is used when the behavior has a clear beginning and end. Counting each instance directly answers the teacher's question about how many times the behavior occurred.

  2. Question 2Measurement

    Which measure captures the total amount of time a learner engages in a behavior from its onset to its offset?

    1. Latency to the first response
    2. Total duration of the behavior Correct answer.
    3. Interresponse time between episodes
    4. Rate of responding per minute

    Explanation

    Duration recording starts a timing device when the behavior begins and stops it when the behavior ends, producing the length of each episode. Summing episodes gives total duration, the dimension of time engaged in behavior.

  3. Question 3Measurement

    A teacher says "please sit down" and starts a stopwatch, stopping it when the student is seated. Which measure is being recorded?

    1. Response latency Correct answer.
    2. Duration of the request
    3. Rate of compliance
    4. Interresponse time

    Explanation

    Latency is the elapsed time between the presentation of a stimulus or instruction and the beginning of the response. Here the stopwatch runs from the instruction to the initiation of sitting, which is latency to respond.

  4. Question 4Measurement

    Which is the best example of permanent product recording?

    1. Timing tantrums with a stopwatch
    2. Tallying every hand raise during a lesson
    3. Counting finished worksheets left in the tray Correct answer.
    4. Marking intervals in which behavior occurred

    Explanation

    Permanent product recording measures the tangible outcome or residue the behavior leaves behind, which can be examined after the behavior has ended. Completed worksheets are a physical product that can be counted without observing the behavior as it happens.

  5. Question 5Measurement

    In partial-interval recording, an interval is scored as an occurrence when the behavior:

    1. occurred at least once before the interval began
    2. is occurring at the final second of the interval
    3. occurs at any point during the interval Correct answer.
    4. occurs for the entire length of the interval

    Explanation

    Partial-interval recording scores an interval if the behavior occurs at least once at any moment within that interval, regardless of how long it lasts. It therefore captures brief or sporadic occurrences within the interval.

  6. Question 6Measurement

    Compared with continuous direct observation, whole-interval recording tends to:

    1. underestimate how often the behavior occurs Correct answer.
    2. match the true value exactly
    3. have no consistent relationship to the true value
    4. overestimate how often the behavior occurs

    Explanation

    Whole-interval recording scores an interval only when the behavior persists for the entire interval, so any interval containing brief or interrupted behavior is scored as no occurrence. This systematically produces lower estimates than continuous measurement.

  7. Question 7Measurement

    A staff member watches a client only at the last moment of each 5-minute interval and records whether the behavior is happening right then. This is:

    1. partial-interval recording
    2. event recording
    3. whole-interval recording
    4. momentary time sampling Correct answer.

    Explanation

    Momentary time sampling requires observing only at a specific instant, typically the end of each interval, and recording whether the behavior is occurring at that moment. Behavior at other points within the interval is not recorded.

  8. Question 8Measurement

    On a line graph, the horizontal axis (x-axis) usually represents:

    1. the dimension of behavior being measured
    2. the passage of time or successive sessions Correct answer.
    3. the number of responses per minute
    4. the percentage of intervals scored

    Explanation

    By convention the x-axis displays time, such as sessions, days, or dates, moving left to right. The behavior measure itself is plotted on the vertical axis.

  9. Question 9Measurement

    Observer A records 20 responses and Observer B records 18 responses in the same session. Using total count interobserver agreement, agreement is:

    1. 95%
    2. 80%
    3. 90% Correct answer.
    4. 111%

    Explanation

    Total count IOA divides the smaller count by the larger count and multiplies by 100. Here 18 divided by 20 equals 0.90, or 90% agreement.

  10. Question 10Measurement

    Two observers score the same 20 intervals and agree on 15 of them. Interval-by-interval interobserver agreement is:

    1. 75% Correct answer.
    2. 70%
    3. 80%
    4. 85%

    Explanation

    Interval-by-interval IOA divides the number of intervals with agreement by the total number of intervals and multiplies by 100. With 15 agreements out of 20 intervals, agreement is 75%.

  11. Question 11Measurement

    Observer A times a behavior episode at 60 seconds and Observer B times the same episode at 54 seconds. Duration-based interobserver agreement is:

    1. 84%
    2. 90% Correct answer.
    3. 95%
    4. 80%

    Explanation

    Duration IOA is calculated by dividing the shorter recorded duration by the longer recorded duration and multiplying by 100. Here 54 divided by 60 equals 0.90, or 90% agreement.

  12. Question 12Measurement

    Two observers consistently produce the same scores, but both differ from the value recorded by a calibrated measurement device. This pattern shows:

    1. low accuracy and low reliability
    2. high accuracy and high reliability
    3. high accuracy and low reliability
    4. high reliability and low accuracy Correct answer.

    Explanation

    Reliability refers to consistency between observers, while accuracy refers to agreement with the true value. Observers who agree with one another but not with the calibrated standard are consistent but inaccurate.

  13. Question 13Measurement

    Baseline data show a steadily increasing trend for a behavior the intervention is designed to increase. The behavior analyst should:

    1. discard the baseline data and restart the graph
    2. start the intervention immediately to save sessions
    3. keep collecting baseline until the data stabilize Correct answer.
    4. average the baseline points and begin intervention

    Explanation

    A baseline that is trending in the direction the intervention is expected to produce makes it impossible to attribute later change to treatment. Baseline should continue until the data are stable or the trend runs opposite to the expected treatment effect.

  14. Question 14Measurement

    The overall direction of a data path across sessions on a line graph is called the:

    1. trend Correct answer.
    2. level
    3. range
    4. variability

    Explanation

    Trend describes the direction of the data path over time, such as increasing, decreasing, or flat. Level refers to the average value of the data within a phase, and variability refers to how much the points scatter.

  15. Question 15Measurement

    A supervisor asks you to record the time between two consecutive instances of the same behavior. You are measuring:

    1. interresponse time Correct answer.
    2. duration per occurrence
    3. rate of responding
    4. response latency

    Explanation

    Interresponse time is the elapsed time between the end of one instance of a behavior and the start of the next instance of that same behavior. It indexes how closely spaced the responses are.

  16. Question 16Measurement

    One student raises a hand 10 times in a 10-minute session, and another raises a hand 10 times in a 50-minute session. Which measure allows direct comparison of the two students?

    1. Duration per occurrence
    2. Frequency count
    3. Rate per minute Correct answer.
    4. Latency to the first response

    Explanation

    Rate expresses the count of responses per unit of time, which standardizes data collected across sessions of different lengths. Because the two sessions differ in length, raw counts alone cannot be compared fairly.

  17. Question 17Measurement

    A behavior occurs briefly a few times per session, but each occurrence is scored under 10-second partial-interval recording. Compared with true duration, the data will most likely:

    1. underestimate the amount of behavior
    2. equal the true duration
    3. be unrelated to the true duration
    4. overestimate the amount of behavior Correct answer.

    Explanation

    Partial-interval recording credits an entire interval for any occurrence within it, so a response lasting a second or two inflates the estimated proportion of time engaged in behavior. This overestimation grows when intervals are long relative to the behavior.

  18. Question 18Measurement

    Across three intervals, Observer A records 4, 6, and 2 responses, while Observer B records 4, 3, and 2. Mean count-per-interval interobserver agreement is:

    1. 83% Correct answer.
    2. 75%
    3. 90%
    4. 100%

    Explanation

    Count-per-interval IOA is computed for each interval by dividing the smaller count by the larger count, then averaging across intervals. The three ratios are 4/4, 3/6, and 2/2, giving 100%, 50%, and 100%, which average to about 83%.

  19. Question 19Measurement

    Which statement is the best example of an operational definition?

    1. Jayden hits or kicks others hard enough to be heard Correct answer.
    2. Jayden is aggressive whenever he is upset during work time
    3. Jayden feels angry and frustrated during work time
    4. Jayden has a bad temper on most school days

    Explanation

    An operational definition describes observable, measurable behavior in concrete terms so that different observers can agree on what counts. Specifying the topography, such as hitting or kicking another person, makes the behavior directly observable and countable.

  20. Question 20Measurement

    A vertical line drawn on a line graph to mark where one phase ends and the next begins is a:

    1. data path
    2. condition change line Correct answer.
    3. level line
    4. trend line

    Explanation

    Condition change lines separate phases such as baseline and intervention on a graph so that changes in the data can be read against phase changes. They are typically drawn as vertical lines at the point where conditions changed.

  21. Question 21Measurement

    A student responded correctly on 16 of 20 practice trials. The percent of opportunities with a correct response is:

    1. 80% Correct answer.
    2. 90%
    3. 75%
    4. 85%

    Explanation

    Percent of opportunities is calculated by dividing the number of correct responses by the total number of opportunities and multiplying by 100. Here 16 divided by 20 equals 0.80, or 80%.

  22. Question 22Measurement

    A behavior analyst must measure off-task behavior during a 40-minute independent work period. The behavior has no clear onset or offset, and episodes are brief and frequent. Which measurement approach is most practical?

    1. Duration per occurrence for each episode
    2. Latency to the first off-task episode
    3. Partial-interval recording in short intervals Correct answer.
    4. Permanent product count of unfinished items

    Explanation

    When a behavior lacks clear boundaries and occurs in brief, frequent episodes, interval recording provides a practical estimate of occurrence without requiring continuous timing. Partial-interval scoring in short intervals captures any occurrence within each interval.

  23. Question 23Measurement

    Intervention data show a highly variable data path that overlaps baseline, and staff report the intervention is being delivered inconsistently. The most appropriate next step is to:

    1. begin a different intervention immediately
    2. conclude the intervention was ineffective and stop it
    3. remove the outlying data points from the graph
    4. check implementation fidelity and keep collecting data Correct answer.

    Explanation

    When data are variable and the procedure is not being delivered as designed, treatment integrity must be assessed before drawing conclusions about effectiveness. Continuing data collection allows the effects of improved implementation to be evaluated.

  24. Question 24Measurement

    Best practice for interobserver agreement requires that a second observer collects data:

    1. at the end of the month from memory
    2. whenever the behavior looks unusually frequent
    3. only on sessions the primary observer found difficult
    4. independently during randomly selected sessions Correct answer.

    Explanation

    IOA is meaningful when observers record independently across a representative, randomly selected portion of sessions so that neither observer can influence the other. Scheduling checks in advance and avoiding cues about when agreement is being assessed protects the accuracy of the estimate.

  25. Question 25Measurement

    Why do behavior analysts collect baseline data before starting an intervention?

    1. to identify the function of the behavior
    2. to satisfy funders and nothing more
    3. to select effective reinforcers for the program
    4. to provide a comparison for later intervention data Correct answer.

    Explanation

    Baseline provides the pre-intervention level of the behavior against which later performance is compared when judging intervention effects. Without it, changes in behavior cannot be attributed to the intervention rather than to other factors.

  26. Question 26Measurement

    A teacher places a worksheet in front of a student and records the number of seconds that pass before the student writes the first answer. This is a measure of:

    1. rate
    2. latency Correct answer.
    3. duration
    4. interresponse time

    Explanation

    Latency is the elapsed time between the onset of a stimulus (here, the worksheet or instruction) and the onset of the response. It captures how long the learner takes to begin, not how long the behavior lasts or how often it occurs.

  27. Question 27Measurement

    Which of the following is an example of measuring behavior through a permanent product?

    1. Scanning the room every 2 minutes to count students who are working
    2. Tallying each time a student shouts out during a lesson as it happens
    3. Counting the completed homework pages left in a basket after class Correct answer.
    4. Using a stopwatch to time how long a student stays on task

    Explanation

    Permanent product measurement examines the tangible outcome the behavior leaves behind, so the behavior itself does not need to be observed while it occurs. Counting completed worksheets after class is a product measure; the other options all require watching behavior in real time.

  28. Question 28Measurement

    A therapist records how many teaching sessions are needed before a learner performs a skill correctly on 90% of trials in three consecutive sessions. This measure is best described as:

    1. percent of opportunities with a correct response
    2. interresponse time
    3. duration per session
    4. trials to criterion Correct answer.

    Explanation

    Trials to criterion counts how many trials, sessions, or teaching opportunities are required before the learner reaches a predetermined performance criterion. It summarizes how quickly a skill is acquired rather than the level of performance within any single session.

  29. Question 29Measurement

    A teacher wants a quick estimate of how many of the 25 students in her class are actively engaged in seatwork. At the end of each 10-minute interval she looks up and counts how many students are working. This procedure is:

    1. partial-interval recording for one target student
    2. a planned activity check (PLACHECK) Correct answer.
    3. duration recording of group engagement
    4. event recording of group behavior

    Explanation

    A PLACHECK is a momentary time-sampling procedure used with groups: at the end of each interval the observer counts how many members of the group are engaged in the target activity. It yields a group-level index of engagement rather than a measure of any one individual.

  30. Question 30Measurement

    Two observers independently tally the number of talk-outs in each of 10 intervals. Their counts are identical in 7 of the 10 intervals. Exact count-per-interval IOA is:

    1. 30%
    2. 100%
    3. 70% Correct answer.
    4. 43%

    Explanation

    Exact count-per-interval IOA divides the number of intervals in which the two observers recorded exactly the same count by the total number of intervals, then multiplies by 100 (7 ÷ 10 = 70%). The counts must match exactly; merely agreeing that a behavior occurred is not enough.

  31. Question 31Measurement

    An observer's recordings of a client's stereotypy gradually drop over several weeks even though the client's behavior and the observation procedures have not changed and the observer has grown more comfortable with the definition. This is best described as:

    1. reactivity
    2. poor treatment integrity
    3. observer bias
    4. observer drift Correct answer.

    Explanation

    Observer drift is a gradual, unintended change in how an observer applies a definition over time, which shifts the data even when the behavior and procedures stay the same. Periodic retraining and ongoing IOA checks are the standard safeguards against it.

  32. Question 32Measurement

    On a line graph, the value around which the data points in a phase cluster, often summarized as the mean or median of that phase, is called the:

    1. trend
    2. variability
    3. level Correct answer.
    4. range

    Explanation

    Level describes the overall magnitude of the data within a phase and is often summarized with the mean or median of the points in that phase. Trend concerns the direction of the data path, and variability concerns how spread out the points are.

  33. Question 33Measurement

    A behavior analyst uses the split-middle method to draw a line of progress through a phase of baseline data. The resulting line is best interpreted as:

    1. a summary of the interobserver agreement checks conducted across the phase
    2. a prediction of future performance under unchanged conditions Correct answer.
    3. the precise scores the client will earn in the next phase
    4. the single highest data point recorded during the phase

    Explanation

    The split-middle method fits a line through a set of data points and extends it, so the line of progress represents the predicted trend and rate of responding if current conditions continue. It is used to forecast performance, for example when judging whether a phase has stabilized before changing conditions.

  34. Question 34Measurement

    Two observers score a low-rate behavior using 20 intervals. They agree in 19 intervals, but the behavior occurred in only one interval and both observers missed it. The high agreement percentage is misleading because:

    1. the percentage was computed incorrectly for this type of IOA
    2. IOA should be calculated only for sessions longer than 30 minutes
    3. the observers should have used a permanent product measure instead
    4. agreement is inflated by the many intervals in which both observers recorded no behavior Correct answer.

    Explanation

    Interval-by-interval IOA credits agreement on nonoccurrence as agreement, so when a behavior is rare, observers who both score 'no' most of the time can show a high percentage even though they never agree that the behavior occurred. Occurrence and nonoccurrence IOA, or scored-interval IOA, are used to correct for this problem.

  35. Question 35Assessment

    A behavior technician records every instance of a client raising a hand during a 30-minute session. Which measurement procedure is being used?

    1. Permanent product recording
    2. Event recording Correct answer.
    3. Momentary time sampling
    4. Whole-interval recording

    Explanation

    Event recording counts each occurrence of a discrete response as it happens, producing a tally or rate for the session. Interval methods divide the session into time blocks, and permanent product measurement scores the tangible outcome of behavior rather than the behavior itself.

  36. Question 36Assessment

    In whole-interval recording, an interval is scored as an occurrence only when the behavior:

    1. is occurring when the interval ends
    2. occurs at least three times in the interval
    3. lasts for the entire interval Correct answer.
    4. occurs at any point during the interval

    Explanation

    Whole-interval recording requires the behavior to be present throughout the whole interval before the interval is scored. Because it demands sustained behavior, it typically underestimates how often a behavior occurs.

  37. Question 37Assessment

    Which measurement method is most likely to overestimate how long a behavior lasts?

    1. Inter-response time recording
    2. Partial-interval recording Correct answer.
    3. Duration recording
    4. Latency recording

    Explanation

    Partial-interval recording scores an entire interval as containing behavior even when only a brief instance occurred. This inflates estimates of how much time the behavior occupied.

  38. Question 38Assessment

    A teacher measures a student's completion of math work by counting finished worksheets left in the student's folder at the end of each day. This is an example of:

    1. Momentary time sampling
    2. Event recording during observation
    3. Whole-interval recording
    4. Permanent product recording Correct answer.

    Explanation

    Permanent product recording measures behavior through the tangible items or effects it leaves behind, allowing data collection after the behavior has ended. Counting completed worksheets is a classic permanent product.

  39. Question 39Assessment

    A technician starts a stopwatch when an instruction is delivered and stops it when the client begins to respond. Which measure is being recorded?

    1. Latency Correct answer.
    2. Rate
    3. Inter-response time
    4. Duration

    Explanation

    Latency is the elapsed time between the presentation of a stimulus or instruction and the start of the response. Duration would measure from the start of the response to its end.

  40. Question 40Assessment

    A teacher places two items in front of a student, asks the student to pick one, and then repeats this with each possible pair of items. Which preference assessment is this?

    1. Multiple stimulus without replacement
    2. Free operant
    3. Paired-choice Correct answer.
    4. Single stimulus

    Explanation

    A paired-choice assessment presents two items per trial and asks the client to select one, with every item eventually paired with every other item. The resulting data yield a rank ordering of preference.

  41. Question 41Assessment

    On an ABC data sheet, the antecedent column should contain:

    1. the client's response to the instruction
    2. how staff responded to the behavior
    3. the number of times the behavior occurred
    4. what was happening just before the behavior occurred Correct answer.

    Explanation

    ABC recording documents the Antecedent (events immediately preceding the behavior), the Behavior itself, and the Consequence that follows. The antecedent column captures the conditions or triggers present right before the behavior.

  42. Question 42Assessment

    A technician collects data on a target behavior under the current classroom conditions before any intervention begins. These data are called:

    1. baseline Correct answer.
    2. maintenance data
    3. probe data
    4. generalization data

    Explanation

    Baseline data describe the level of behavior under existing conditions before treatment is introduced. Baseline serves as the comparison against which intervention effects are judged.

  43. Question 43Assessment

    A technician watches a client for two hours and, every 10 minutes, records whether the client is on task at that exact moment. Which procedure is this?

    1. Whole-interval recording
    2. Partial-interval recording
    3. Duration recording
    4. Momentary time sampling Correct answer.

    Explanation

    Momentary time sampling requires the observer to check the client only at the instant each interval ends and record whether the behavior is occurring at that moment. No observation is required during the rest of the interval.

  44. Question 44Assessment

    A client engaged in 24 responses during a 6-minute session. What is the rate per minute?

    1. 4 Correct answer.
    2. 144
    3. 6
    4. 2

    Explanation

    Rate is calculated by dividing the number of responses by the number of minutes in the observation period. Here 24 responses divided by 6 minutes equals 4 responses per minute.

  45. Question 45Assessment

    Two observers record the same session independently. One records 18 responses and the other records 20. Using the smaller count divided by the larger count, what is the interobserver agreement?

    1. 80%
    2. 95%
    3. 85%
    4. 90% Correct answer.

    Explanation

    The smaller/larger method divides the lower total by the higher total and multiplies by 100. Here 18 divided by 20 equals 0.90, or 90% agreement.

  46. Question 46Assessment

    On a standard line graph, the horizontal axis (x-axis) is used to display:

    1. the measure of the behavior
    2. the sessions or units of time Correct answer.
    3. the percentage of intervals scored
    4. phase change lines

    Explanation

    The x-axis of a line graph represents the passage of time, typically successive sessions or days. The y-axis represents the behavioral measure itself.

  47. Question 47Assessment

    A technician places several toys in a room, lets the client move freely among them for 10 minutes, and records how long the client plays with each toy. This is:

    1. a free operant preference assessment Correct answer.
    2. a multiple stimulus without replacement assessment
    3. a single-stimulus preference assessment
    4. a paired-choice preference assessment

    Explanation

    In a free operant assessment the client has unrestricted access to multiple items, and preference is inferred from the duration of engagement with each item. No items are presented or removed on discrete trials.

  48. Question 48Assessment

    In a multiple stimulus without replacement (MSWO) preference assessment:

    1. the chosen item is removed before the next trial Correct answer.
    2. each item is presented alone
    3. the array stays the same across trials
    4. only two items are presented per trial

    Explanation

    MSWO presents an array of items, the client selects one, and that item is removed before the next trial so remaining items are re-ranked. This produces a hierarchy of preference across the array.

  49. Question 49Assessment

    A technician starts a timer when crying begins and stops it when crying has stopped for 30 seconds. Which measure is being recorded?

    1. Frequency
    2. Duration Correct answer.
    3. Inter-response time
    4. Latency

    Explanation

    Duration measures the total elapsed time a behavior occurs from onset to offset. Using a criterion such as 30 seconds of no crying defines when the episode has ended.

  50. Question 50Assessment

    In a functional analysis, a condition in which the therapist gives attention only after the target behavior occurs is designed to test whether the behavior is maintained by:

    1. access to tangible items
    2. attention Correct answer.
    3. automatic reinforcement
    4. escape from demands

    Explanation

    In the attention condition, attention is delivered contingently on problem behavior while other consequences are withheld. Elevated responding in that condition relative to control conditions suggests an attention function.

  51. Question 51Assessment

    Which of the following best describes a descriptive functional behavior assessment?

    1. Observing the behavior in natural settings without manipulating variables Correct answer.
    2. Asking caregivers to complete a rating scale
    3. Systematically manipulating antecedents and consequences
    4. Running a brief experimental analysis in a clinic

    Explanation

    Descriptive assessment involves observing and recording behavior and its surrounding events as they naturally occur, without arranging or controlling conditions. It yields correlations that suggest possible functions rather than demonstrating them.

  52. Question 52Assessment

    A trial-based functional analysis differs from a standard functional analysis because in a trial-based analysis:

    1. only attention can be tested
    2. test conditions are embedded in classroom routines Correct answer.
    3. a behavior analyst must be present for every trial
    4. no data are collected during the trials

    Explanation

    Trial-based functional analysis embeds brief test and control trials into ongoing activities such as classroom routines, making it practical in natural settings. Data are still collected on responding during each trial.

  53. Question 53Assessment

    A scatterplot is most useful for:

    1. comparing the records of two observers
    2. showing the rate of behavior within a single session
    3. identifying times of day when behavior is most likely Correct answer.
    4. determining the function of behavior experimentally

    Explanation

    A scatterplot displays the occurrence of behavior across time periods, such as hours of the school day, so that patterns in when behavior occurs become visible. It is a descriptive tool and does not identify function experimentally.

  54. Question 54Assessment

    A technician interviews a parent about when and how often the target behavior occurs at home. This is best described as:

    1. permanent product recording
    2. a functional analysis
    3. an indirect assessment Correct answer.
    4. direct observation

    Explanation

    Indirect assessment methods gather information through interviews, questionnaires, and rating scales rather than by observing the behavior. They are useful for generating hypotheses but depend on the reporter's memory and accuracy.

  55. Question 55Assessment

    Two observers collect partial-interval data across 9 intervals and agree on 8 of them. Using interval-by-interval agreement, what is the interobserver agreement?

    1. 17%
    2. 90%
    3. 72%
    4. 89% Correct answer.

    Explanation

    Interval-by-interval agreement divides the number of intervals with agreement by the total number of intervals and multiplies by 100. Eight divided by nine equals 0.889, which rounds to 89%.

  56. Question 56Assessment

    During a functional analysis, problem behavior occurs at high rates in the escape condition and rarely in the play condition. The most likely function is:

    1. escape from task demands Correct answer.
    2. access to attention
    3. access to tangible items
    4. automatic reinforcement

    Explanation

    Differential responding that is elevated only when demands are present and removed contingent on behavior indicates that the behavior is maintained by escape from demands. The low play condition serves as a control comparison.

  57. Question 57Assessment

    A technician's graph shows the target behavior has decreased steadily and stably across the last six sessions of intervention. What should the technician do?

    1. Stop collecting data because the behavior has improved
    2. Continue the current intervention and keep monitoring Correct answer.
    3. Return to baseline conditions to confirm the effect
    4. Change the intervention because it is not working

    Explanation

    A stable, steadily decreasing trend indicates the intervention is producing the intended effect, so the plan should continue while data collection monitors for further change or loss of effect. Changing or withdrawing an effective intervention without clinical justification is not warranted.

  58. Question 58Assessment

    A technician selects reinforcers using a preference assessment that was completed three months ago. What is the main problem with this practice?

    1. Preferences change over time, so the results may be outdated Correct answer.
    2. Preference assessments cannot identify edible items
    3. Items identified earlier always become aversive over time
    4. Preference assessments may only be conducted once per year

    Explanation

    Preferences are not static and can shift with exposure, satiation, and developmental change, so assessments must be repeated periodically. Using stale results risks selecting items that no longer function as reinforcers.

  59. Question 59Assessment

    Which statement about single-stimulus preference assessments is accurate?

    1. They eliminate the influence of the therapist's prompts
    2. They are the only method that produces a preference hierarchy
    3. They require choosing between two items on every trial
    4. They may produce false positives because the client consumes most items presented Correct answer.

    Explanation

    In a single-stimulus assessment each item is presented alone, and clients often approach or consume nearly every item, which can make low-preference items appear preferred. This tendency toward false positives is a recognized limitation of the method.

  60. Question 60Assessment

    A client is given the instruction "put on your shoes." The technician starts a stopwatch the moment the instruction is delivered and stops it when the client picks up the first shoe. Which measure is being recorded?

    1. Latency of the response Correct answer.
    2. Duration of the response
    3. Interresponse time
    4. Rate of the response

    Explanation

    Latency is the elapsed time between the onset of a stimulus or instruction and the beginning of the response. Because the stopwatch runs from the instruction to the start of the behavior, the recorded measure is latency.

  61. Question 61Assessment

    At the end of a session, a technician counts the number of completed math worksheets left in a folder to measure the client's work completion. This measurement approach is best described as:

    1. Momentary time sampling
    2. Permanent product recording Correct answer.
    3. Event recording in vivo
    4. Partial-interval recording

    Explanation

    Permanent product recording measures behavior through the tangible outcomes it leaves behind, so the behavior does not have to be observed while it occurs. Counting finished worksheets after the session is a permanent product measure.

  62. Question 62Assessment

    What is the primary purpose of conducting a preference assessment?

    1. To identify the function of a problem behavior
    2. To identify stimuli that are likely to serve as reinforcers Correct answer.
    3. To measure the reliability of a behavior checklist
    4. To determine the client's current level of academic skills

    Explanation

    Preference assessments rank stimuli by the client's relative approach or selection so that the technician can select items likely to function as reinforcers. They identify potential reinforcers rather than behavioral function or skill level.

  63. Question 63Assessment

    A technician divides a 10-minute session into 30-second intervals and records the behavior only if it occurred throughout the entire interval. Which recording method is being used?

    1. Momentary time sampling
    2. Event recording
    3. Whole-interval recording Correct answer.
    4. Partial-interval recording

    Explanation

    Whole-interval recording scores an interval only when the behavior is present for the full interval. This method tends to underestimate how often behavior occurs because brief or intermittent instances are not counted.

  64. Question 64Assessment

    In a paired-stimulus (forced-choice) preference assessment, the technician:

    1. Presents one item at a time and records the client's approach to it
    2. Records how long the client plays with each item left in the room
    3. Presents all items at once and removes each item after it is chosen
    4. Presents two items together and records which one the client selects Correct answer.

    Explanation

    A paired-stimulus assessment presents items in pairs, and every item is paired with every other item across trials so a preference hierarchy can be built from selection counts. Each trial offers a forced choice between exactly two items.

  65. Question 65Assessment

    A supervisor wants to know whether technicians are implementing a behavior plan exactly as written. Which data should the technician collect?

    1. Baseline data for the target behavior
    2. Social validity questionnaire results
    3. Treatment integrity data Correct answer.
    4. Interobserver agreement data for the target behavior

    Explanation

    Treatment integrity, also called procedural fidelity, measures the extent to which a plan is delivered as written, such as whether each step is completed correctly on each opportunity. It answers the question of whether staff are following the protocol.

  66. Question 66Assessment

    Two observers record the duration of a client's tantrums during the same 20-minute session. Observer A records a total of 200 seconds and Observer B records a total of 160 seconds. Using total duration IOA (smaller total divided by larger total, multiplied by 100), what is the IOA percentage?

    1. 90%
    2. 75%
    3. 70%
    4. 80% Correct answer.

    Explanation

    Total duration IOA is calculated by dividing the smaller recorded total duration by the larger total duration and multiplying by 100. Here, 160 seconds divided by 200 seconds equals 0.80, which is 80% IOA.

  67. Question 67Assessment

    During a functional analysis, the client is left in a room with no toys, no attention, and no tasks, and problem behavior occurs at high, sustained rates in that condition. Which function is most supported?

    1. Access to tangible items
    2. Escape from task demands
    3. Automatic reinforcement Correct answer.
    4. Access to attention

    Explanation

    In the alone condition, no social consequences are available, so high rates of behavior there suggest the behavior produces its own reinforcement. This pattern supports an automatic reinforcement function rather than a socially mediated one.

  68. Question 68Assessment

    A technician helps administer an assessment in which the client reads passages of increasing difficulty so the team can determine the level at which instruction should begin. This is best described as:

    1. A curriculum-based assessment Correct answer.
    2. A paired-stimulus preference assessment
    3. A functional analysis of behavior
    4. An ABC narrative recording

    Explanation

    Curriculum-based assessments sample skills in a sequence of increasing difficulty to identify the client's current instructional level and where teaching should start. They describe skill performance rather than behavioral function or preference.

  69. Question 69Skill Acquisition

    In a discrete trial teaching sequence, which component comes immediately after the learner's response?

    1. The prompt delivered before the response
    2. The next discriminative stimulus
    3. The consequence for the response Correct answer.
    4. The intertrial interval at the end of the trial

    Explanation

    A discrete trial has a clear three-part structure: the discriminative stimulus (instruction), the learner's response, and the consequence that follows it. The consequence may be reinforcement for a correct response or an error correction for an incorrect one. The intertrial interval and the next instruction come later in the sequence.

  70. Question 70Skill Acquisition

    A therapist teaches a student to wash hands by training the first step to mastery, then the first two steps, and so on until the whole routine is taught. Which procedure is this?

    1. Total task presentation
    2. Forward chaining Correct answer.
    3. Backward chaining
    4. Shaping

    Explanation

    Forward chaining teaches the chain in its natural order, adding one step at a time as the learner masters the steps already introduced. The learner always performs the chain from the beginning and receives help only with steps not yet mastered.

  71. Question 71Skill Acquisition

    In backward chaining, which step of the task analysis does the learner perform independently first?

    1. The middle step
    2. The first step
    3. A step chosen at random
    4. The last step Correct answer.

    Explanation

    Backward chaining teaches the chain from the end, so the therapist completes all steps except the final one, which the learner performs. Because the last step is followed by the natural reinforcer, the learner contacts reinforcement on every trial. Earlier steps are added in reverse order over time.

  72. Question 72Skill Acquisition

    A least-to-most prompting hierarchy begins a trial with which prompt level?

    1. Full physical guidance of the response
    2. An independent opportunity Correct answer.
    3. A model prompt
    4. A verbal prompt

    Explanation

    Least-to-most prompting gives the learner a chance to respond with the least amount of help, which means no prompt at all on the first attempt. Prompt intrusiveness increases only if the learner does not respond correctly. This preserves the opportunity for unprompted, independent responding.

  73. Question 73Skill Acquisition

    Which prompting strategy is designed to keep learner errors to a minimum during initial instruction?

    1. Time delay
    2. Least-to-most prompting
    3. Most-to-least prompting Correct answer.
    4. Trial and error

    Explanation

    Most-to-least prompting starts with the most intrusive prompt that ensures a correct response and fades to less help across trials. Because the learner responds correctly from the outset, the procedure is considered errorless. Least-to-most and time delay both allow errors as part of the learning process.

  74. Question 74Skill Acquisition

    In a constant time delay procedure, what happens during the delay interval?

    1. The therapist repeats the instruction every second
    2. The trial ends with no prompt given
    3. The prompt is delivered at the same moment as the instruction
    4. The therapist waits a set number of seconds before prompting Correct answer.

    Explanation

    In constant time delay, a fixed interval of zero seconds is used for several trials, then a fixed delay (for example, four seconds) is used on all remaining trials. During the delay the learner has a chance to respond independently before the prompt is delivered. The delay length stays the same across trials.

  75. Question 75Skill Acquisition

    A task analysis is best described as which of the following?

    1. A list of reinforcers ranked by preference
    2. A written record of every learner response during baseline sessions
    3. A schedule for thinning reinforcement over time
    4. A breakdown of a complex skill into smaller teachable steps Correct answer.

    Explanation

    A task analysis identifies the component steps of a complex, chained skill so each step can be taught and prompted. The steps are then sequenced in the order the learner must perform them. It is the foundation for forward chaining, backward chaining, and total task presentation.

  76. Question 76Skill Acquisition

    Shaping involves reinforcing which of the following?

    1. Only the final target behavior
    2. Behaviors that occur after the prompt is faded
    3. Successive approximations toward the target behavior Correct answer.
    4. Any behavior that is topographically identical to the target

    Explanation

    Shaping builds a new behavior by reinforcing responses that come closer and closer to the target, while no longer reinforcing earlier approximations. It is used when the terminal response rarely or never occurs on its own. Each step is a closer approximation than the one before.

  77. Question 77Skill Acquisition

    A student correctly says "dog" to pictures of dogs and does not say "dog" to pictures of cats. This outcome is evidence of which of the following?

    1. Adventitious reinforcement of correct answers
    2. Stimulus control by the relevant features of dogs Correct answer.
    3. Response generalization across all animals and pictures
    4. A mand for pictures of animals

    Explanation

    The response occurs in the presence of the discriminative stimulus (dog pictures) and does not occur in the presence of the S-delta (cat pictures). That differential responding shows the behavior has come under the control of the relevant features of the pictures. This is the outcome that discrimination training is designed to produce.

  78. Question 78Skill Acquisition

    A teacher begins by providing full hand-over-hand guidance for a student to pick up a spoon, then gradually reduces the guidance to a light touch at the wrist. This is an example of which of the following?

    1. Time delay
    2. Stimulus fading
    3. Response prompt fading Correct answer.
    4. Discrimination training

    Explanation

    Reducing the intensity of a physical prompt across trials is response prompt fading, because the prompt itself is being changed. Stimulus fading instead changes a dimension of the antecedent stimulus. The goal is transfer of control to the natural instruction.

  79. Question 79Skill Acquisition

    A learner consistently waits for the therapist's verbal prompt before responding, even after many sessions of least-to-most prompting. Which change is most likely to address this?

    1. Using a shorter intertrial interval
    2. Fading the prompt and reinforcing unprompted responses Correct answer.
    3. Adding an extra model prompt immediately before the verbal prompt
    4. Increasing the number of trials per session

    Explanation

    The learner's behavior is under the control of the prompt rather than the natural instruction, a pattern known as prompt dependence. The remedy is to fade prompts systematically and arrange reinforcement for unprompted responses so the natural instruction acquires control. Adding prompts or more trials would strengthen the prompt dependence.

  80. Question 80Skill Acquisition

    A teacher says "touch red" and immediately points to the red card for several trials, then inserts a one-second pause before pointing, later a two-second pause, and so on. Which procedure is being used?

    1. Progressive time delay Correct answer.
    2. Behavioral momentum
    3. Most-to-least prompting
    4. Constant time delay

    Explanation

    Progressive time delay increases the delay between the instruction and the prompt across trials, giving the learner increasing opportunity to respond independently. Constant time delay would hold the delay at one fixed length. Both are used to shift control from the prompt to the instruction.

  81. Question 81Skill Acquisition

    In discrimination training, what is the role of the S-delta?

    1. It signals that reinforcement is available for the response
    2. It serves as an establishing operation for the response
    3. It is a conditioned punisher for the response
    4. It signals that reinforcement is unavailable for the response Correct answer.

    Explanation

    An S-delta is the stimulus in whose presence the target response is not reinforced. Responding to the S-delta goes unreinforced while responding to the SD is reinforced, which produces differential responding. The S-delta is not itself a punisher.

  82. Question 82Skill Acquisition

    A student learns to use a greetings card in the classroom and then uses it with new staff in the cafeteria without additional training. This is an example of which of the following?

    1. Chaining
    2. Response differentiation
    3. Response maintenance
    4. Stimulus generalization Correct answer.

    Explanation

    Stimulus generalization occurs when a response taught in the presence of one stimulus also occurs in the presence of similar but untrained stimuli, such as new people and settings. The response itself did not change; the range of stimuli that evoke it widened. Maintenance would refer to the skill persisting over time.

  83. Question 83Skill Acquisition

    A learner can sort pictures of dogs but does not sort real dogs. Which teaching approach best promotes generalization to the real animals?

    1. Increasing reinforcement for sorting pictures
    2. Repeating the picture-sorting program to mastery
    3. Training with multiple exemplars Correct answer.
    4. Using a time delay before presenting pictures

    Explanation

    Teaching with multiple exemplars presents many varied examples of the concept, including real dogs, so the response comes under the control of the defining features rather than the incidental features of photographs. This is a standard generalization programming tactic. Extra practice with pictures alone would sharpen stimulus control to pictures.

  84. Question 84Skill Acquisition

    Maintenance of a skill is best assessed by which of the following?

    1. Measuring latency to respond during training sessions
    2. Probing the skill immediately after the last training trial
    3. Comparing prompted and unprompted responses during acquisition
    4. Probing the skill after training has ended Correct answer.

    Explanation

    Maintenance refers to the persistence of a learned skill after teaching stops and reinforcement conditions change. It is therefore measured with follow-up probes conducted after training has concluded. Measurement during training describes acquisition, not maintenance.

  85. Question 85Skill Acquisition

    A therapist starts a session with several easy instructions the child usually follows, then presents a difficult new instruction. Which procedure is this?

    1. High-probability request sequence Correct answer.
    2. Progressive time delay
    3. Backward chaining
    4. Errorless discrimination training

    Explanation

    A high-probability request sequence, also called behavioral momentum, delivers several requests with a high history of compliance before a low-probability request. The run of reinforced responses increases the likelihood that the learner will comply with the harder request. It is not a chaining or prompting procedure.

  86. Question 86Skill Acquisition

    A student is taught an entire grooming routine, receiving prompting only for the steps he cannot complete independently. Which procedure is being used?

    1. Total task presentation Correct answer.
    2. Forward chaining
    3. Backward chaining
    4. Shaping

    Explanation

    In total task presentation the learner attempts every step of the task analysis on every trial, with prompting applied only where needed. All steps are taught together rather than one at a time from the beginning or the end. This differs from forward and backward chaining, which introduce steps sequentially.

  87. Question 87Skill Acquisition

    A therapist says "do this" while tapping the table and reinforces the learner for tapping the table. This targets which skill?

    1. An intraverbal
    2. A tact
    3. Motor imitation Correct answer.
    4. A mand

    Explanation

    Motor imitation is a response that topographically matches a model's nonverbal action and is reinforced for that correspondence. The therapist's action serves as the model, and the learner's matching movement is the target. Vocal behavior is not involved.

  88. Question 88Skill Acquisition

    A response that is vocal, matches the therapist's vocal model, and is reinforced by that correspondence is which verbal operant?

    1. Intraverbal
    2. Echoic Correct answer.
    3. Mand
    4. Tact

    Explanation

    An echoic is a vocal response that repeats a vocal model and is reinforced for its similarity to that model. It is the building block for other vocal repertoires and is not controlled by a motivating operation or by a nonverbal stimulus.

  89. Question 89Skill Acquisition

    During shaping, a therapist stops reinforcing a previously reinforced approximation once a closer approximation appears. Which principle does this illustrate?

    1. Differential reinforcement of approximations Correct answer.
    2. Response maintenance across sessions
    3. Negative reinforcement of the terminal response
    4. Stimulus generalization across responses

    Explanation

    Shaping works through differential reinforcement: responses that meet the current criterion are reinforced and responses that no longer meet it are placed on extinction. Withdrawing reinforcement from the earlier approximation is what pushes the response toward the next criterion. The process continues until the terminal response occurs.

  90. Question 90Skill Acquisition

    Transfer of stimulus control from a prompt to the naturally occurring SD is accomplished primarily by which of the following?

    1. Extinction of the target response
    2. Shortening the intertrial interval
    3. Increasing the magnitude of the reinforcer delivered after each correct response
    4. Fading the prompt while the SD stays in place Correct answer.

    Explanation

    Prompt fading gradually removes the supplementary stimulus while the natural SD continues to precede the response. Reinforcement then comes to depend on the SD alone, so control transfers to it. Simply boosting reinforcement or changing pacing does not remove the prompt.

  91. Question 91Skill Acquisition

    In a backward chain, why is the last step of the task analysis typically taught first?

    1. It ensures the learner is reinforced only once per session
    2. It is usually the easiest step in the chain
    3. It removes the need for a written task analysis
    4. The learner contacts the terminal reinforcer each trial Correct answer.

    Explanation

    When the learner performs the final step, the chain is complete and the natural consequence follows immediately. That means every trial ends in reinforcement of a completed chain from the earliest stages of teaching. The step is chosen for its position in the sequence, not because it is easiest.

  92. Question 92Skill Acquisition

    A therapist wants to teach a discrimination with the fewest possible errors. Which approach fits best?

    1. Beginning with a prompted SD and then fading the prompt Correct answer.
    2. Reinforcement of all responses regardless of the stimulus
    3. Alternating SD and S-delta trials with no prompting at all
    4. Trial-and-error presentation of the S-delta and the SD

    Explanation

    Errorless discrimination training presents the SD with a prompt that ensures the correct response and fades that prompt across trials, while the S-delta is never followed by reinforcement. This prevents the learner from contacting reinforcement for responding to the S-delta. Trial-and-error arrangements allow many errors before the discrimination forms.

  93. Question 93Skill Acquisition

    A child is taught to request "juice" during snack time, when access to juice is the natural consequence. Which teaching arrangement is this?

    1. Stimulus fading
    2. Natural environment teaching Correct answer.
    3. Discrete trial teaching in a massed format
    4. Backward chaining

    Explanation

    Natural environment teaching embeds instruction in ongoing routines and uses consequences that are naturally related to the response. Requesting juice during snack and receiving juice is a typical example. Massed discrete trial teaching would use repeated table-top trials with arbitrary reinforcers.

  94. Question 94Skill Acquisition

    A discrete trial typically contains which sequence of components?

    1. A preference assessment, the target response, and a maintenance check
    2. Instruction, learner response, consequence, and a brief intertrial interval Correct answer.
    3. A task analysis, a prompt hierarchy, and a mastery probe
    4. Instruction alone, with reinforcement delivered once at the end of the session

    Explanation

    A discrete trial is a teaching unit with a clear antecedent (instruction plus any prompt), a learner response, a consequence delivered immediately, and a short pause before the next trial. Each trial carries its own consequence rather than sharing one at session's end.

  95. Question 95Skill Acquisition

    During a picture-naming session, the therapist silently points to the correct picture card. This prompt is best described as which type?

    1. A model prompt
    2. A physical prompt
    3. A gestural prompt Correct answer.
    4. A vocal prompt

    Explanation

    Prompts are classified by the form of the added antecedent cue. Pointing is a gesture that cues the response without the therapist speaking or physically guiding the learner.

  96. Question 96Skill Acquisition

    A teacher is teaching a four-step handwashing routine using forward chaining. What does the teacher do on the first day of instruction?

    1. Teach the first step to mastery while the teacher completes the remaining steps Correct answer.
    2. Have the student perform the last step first while the teacher completes the earlier steps
    3. Have the student perform all four steps with prompting only for steps he cannot do
    4. Wait until the student performs the entire routine independently before beginning to teach

    Explanation

    Forward chaining begins with the first step of the task analysis and reinforces it to mastery while the instructor completes the rest of the chain. Steps are then added in the order they occur in the routine.

  97. Question 97Skill Acquisition

    Which statement best characterizes a fluent response?

    1. The response is emitted without any prior instruction or prompt
    2. The response is performed slowly but with perfect form on every trial
    3. The response occurs only under one specific set of stimulus conditions
    4. The response is accurate and occurs at a rapid, smooth rate Correct answer.

    Explanation

    Fluency combines accuracy with speed and smoothness of performance. Fluent skills are more likely to be retained, maintained over time, and applied to new situations.

  98. Question 98Skill Acquisition

    A supervisor describes how to deliver behavior-specific praise, demonstrates it, has the new therapist role-play with her, and then provides corrective feedback on the rehearsal. This is an example of which procedure?

    1. Behavioral skills training Correct answer.
    2. Total task presentation
    3. Incidental teaching
    4. Stimulus fading

    Explanation

    Behavioral skills training packages instruction, modeling, rehearsal, and feedback so the trainee practices the skill with support before using it independently.

  99. Question 99Skill Acquisition

    A learner says "ball" after the teacher asks, "What do you bounce?" This response is best classified as which verbal operant?

    1. A mand
    2. A tact
    3. An echoic
    4. An intraverbal Correct answer.

    Explanation

    An intraverbal is verbal behavior evoked by another person's verbal behavior, without point-to-point correspondence with that verbal stimulus. Answering a question fits this definition.

  100. Question 100Skill Acquisition

    A teacher wants a student's newly learned "raise hand" skill to occur with different adults, in different rooms, and with different wording of the instruction. Which approach best supports this outcome?

    1. Vary the adults, settings, and instruction wording during teaching Correct answer.
    2. Deliver every instruction using the identical words and materials each time
    3. Teach the skill only in the room where the final assessment will occur
    4. Reinforce the skill only during the first session of each week

    Explanation

    Teaching loosely means deliberately varying noncritical features such as the person, place, and phrasing so the response comes under the control of the essential stimulus. This programming makes generalized performance more likely.

  101. Question 101Skill Acquisition

    A therapist teaches a learner to name a picture by presenting the picture with the printed word written across it, then gradually making the word smaller and lighter until only the picture remains. This procedure is best described as which of the following?

    1. Graduated guidance
    2. Forward chaining
    3. Stimulus fading Correct answer.
    4. Time delay

    Explanation

    Stimulus fading changes a physical dimension of the antecedent stimulus while the required response stays the same, shifting control to the target feature. Here the added word is systematically reduced until the picture alone evokes the response.

  102. Question 102Skill Acquisition

    A learner says "cookie" when hungry and receives a cookie, and later says "cookie" when shown a picture of a cookie and receives praise. The first instance is best classified as which of the following?

    1. An echoic controlled by a matching vocal model
    2. A mand controlled by a motivating operation Correct answer.
    3. A tact controlled by a motivating operation
    4. An intraverbal controlled by a verbal stimulus

    Explanation

    A mand is verbal behavior under the control of a motivating operation and is reinforced by the specific consequence it names. The tact, by contrast, is controlled by a nonverbal stimulus such as the picture.

  103. Question 103Behavior Reduction

    ABC data show that a learner's screaming occurs mostly when staff are on the phone and stops as soon as a staff member looks at the learner. Which function of the behavior is most likely?

    1. Escape from a demanding task
    2. Attention from staff Correct answer.
    3. Access to a preferred tangible
    4. Automatic reinforcement

    Explanation

    When a behavior reliably produces a social reaction and stops once that reaction is delivered, attention is the likely maintaining reinforcer. The pattern shows the consequence is adult attention, not task removal.

  104. Question 104Behavior Reduction

    In a behavior reduction plan, the socially acceptable response that is taught to produce the same reinforcer as the problem behavior is called:

    1. A setting event
    2. A punisher
    3. An establishing operation
    4. A replacement behavior Correct answer.

    Explanation

    A replacement behavior is taught so the learner can meet the same need with a more appropriate, efficient response. It is matched to the function of the problem behavior.

  105. Question 105Behavior Reduction

    Which best describes an extinction burst?

    1. The return of a behavior after it had been eliminated
    2. The spread of treatment effects to untrained settings
    3. A permanent worsening of the behavior after treatment ends
    4. A temporary increase in the behavior after extinction begins Correct answer.

    Explanation

    An extinction burst is a temporary increase in rate, intensity, or variability of the response just after reinforcement is discontinued. It typically subsides if the procedure is applied consistently.

  106. Question 106Behavior Reduction

    A plan delivers a token after every 5-minute period in which a learner does not hit, and any hit cancels the token for that period. Which schedule is this?

    1. Differential reinforcement of alternative behavior (DRA)
    2. Differential reinforcement of other behavior (DRO) Correct answer.
    3. Differential reinforcement of low rates (DRL)
    4. Differential reinforcement of incompatible behavior (DRI)

    Explanation

    DRO reinforces the absence of the target behavior: reinforcement follows an interval in which the behavior did not occur. Because no specific alternative response is required, DRO is the correct label.

  107. Question 107Behavior Reduction

    A learner drops to the floor whenever math worksheets are presented, and the behavior is maintained by escape. Which procedure is escape extinction?

    1. Continuing the demand until the learner completes it Correct answer.
    2. Removing the demand when the learner drops to the floor
    3. Sending the learner to a quiet area to calm down
    4. Waiting quietly until the learner stands up on their own

    Explanation

    Escape extinction means the problem behavior no longer produces removal of the demand. The task stays in place until the learner completes it, so escape is no longer available for the behavior.

  108. Question 108Behavior Reduction

    A team reinforces a learner with a short break each time the learner says "break" instead of flopping, and the break serves the same function the flopping did. Which procedure is this?

    1. Response cost
    2. DRA Correct answer.
    3. DRL
    4. DRO

    Explanation

    DRA reinforces a specific alternative response that produces the same reinforcer as the problem behavior, while the problem behavior is no longer reinforced. Function matching is what makes the alternative effective.

  109. Question 109Behavior Reduction

    Staff hand a learner a preferred toy every 2 minutes no matter what the learner is doing. Which procedure is being used?

    1. Response cost
    2. A token economy
    3. Differential reinforcement of incompatible behavior
    4. Noncontingent reinforcement Correct answer.

    Explanation

    Noncontingent reinforcement delivers a preferred stimulus on a time-based schedule that is independent of the learner's behavior. This reduces the motivating operation for problem behavior.

  110. Question 110Behavior Reduction

    Which is an example of response cost?

    1. Praise delivered after 10 minutes without cursing
    2. Brief time-out in a chair after cursing
    3. Extra chores assigned after cursing
    4. Loss of a token for each instance of cursing Correct answer.

    Explanation

    Response cost is a punishment procedure in which a specified amount of an already-earned reinforcer, such as a token, is removed contingent on the behavior. The learner loses something they already possessed.

  111. Question 111Behavior Reduction

    Which statement describes a key limitation of a descriptive (ABC) assessment compared with a functional analysis?

    1. It cannot be conducted in natural settings
    2. It requires controlled manipulation of antecedents and consequences
    3. It identifies correlations rather than a functional relation Correct answer.
    4. It is only useful for behaviors maintained by attention

    Explanation

    Descriptive methods document what happens around the behavior but manipulate nothing, so they cannot show that events cause the behavior. A functional analysis experimentally manipulates conditions to demonstrate a functional relation.

  112. Question 112Behavior Reduction

    Extinction eliminated a learner's spitting for two weeks. On the first day back from a two-week break, spitting briefly reappears and then stops again. This is best described as:

    1. An extinction burst
    2. Spontaneous recovery Correct answer.
    3. Satiation
    4. Resurgence

    Explanation

    Spontaneous recovery is the reappearance of a previously extinguished response after a break in the procedure or a change in context. It is usually brief and does not mean the procedure failed.

  113. Question 113Behavior Reduction

    Which of these is an antecedent intervention?

    1. A choice of tasks before work Correct answer.
    2. A time-out after hitting
    3. A token loss for hitting
    4. Praise after a calm minute

    Explanation

    Antecedent interventions arrange conditions before the behavior occurs, such as offering choices, to reduce the likelihood of problem behavior. The other options are consequences delivered after behavior.

  114. Question 114Behavior Reduction

    Time-out from positive reinforcement is most likely to be effective when:

    1. the time-out period lasts at least 30 minutes
    2. the learner prefers time-out to the classroom
    3. time-in has no preferred activities
    4. time-in offers reinforcers the learner can lose Correct answer.

    Explanation

    Time-out works by briefly removing access to reinforcement, so the time-in setting must contain reinforcers the learner values. If time-in is not reinforcing, time-out has little effect.

  115. Question 115Behavior Reduction

    Functional communication training reduces problem behavior mainly because:

    1. the learner gains the same reinforcer through a new response Correct answer.
    2. the demand that triggered the behavior is removed for good
    3. the learner is given the reinforcer on a fixed-time schedule
    4. the problem behavior is punished each time it occurs

    Explanation

    FCT teaches a communicative response that produces the same reinforcer as the problem behavior, giving the learner a more efficient way to meet the need. The problem behavior is placed on extinction while communication is reinforced.

  116. Question 116Behavior Reduction

    By definition, a punisher is a consequence that:

    1. increases the behavior it follows
    2. has no effect on the behavior it follows
    3. signals that reinforcement is available
    4. decreases the behavior it follows Correct answer.

    Explanation

    A punisher is defined by its effect: it decreases the future frequency of the behavior it follows. Whether a consequence is punishing depends on observed change, not on how unpleasant it appears.

  117. Question 117Behavior Reduction

    A learner blurts out about 10 times per class. The teacher reinforces the learner at the end of class when blurting occurred 3 or fewer times. Which schedule is this?

    1. DRI
    2. DRL Correct answer.
    3. DRO
    4. DRA

    Explanation

    Differential reinforcement of low rates delivers reinforcement when the behavior occurs at or below a specified rate during a period. Here the criterion is a maximum number of responses per class.

  118. Question 118Behavior Reduction

    After a learner throws food, staff require the learner to pick up the food, wipe the table, and then clean the whole table area thoroughly. This procedure is:

    1. Extinction
    2. Response cost
    3. Overcorrection Correct answer.
    4. Time-out

    Explanation

    Overcorrection requires the learner to repair the effects of the behavior and then practice an exaggerated, appropriate form of the behavior. The effort involved makes the problem behavior less likely.

  119. Question 119Behavior Reduction

    Self-injury occurs at low rates in the clinic, where reinforcement is rich, but rises sharply at home, where reinforcement is lean. This pattern is best described as:

    1. Spontaneous recovery
    2. Behavioral contrast Correct answer.
    3. Resurgence
    4. Satiation

    Explanation

    Behavioral contrast occurs when a change in reinforcement in one setting or component produces an opposite change in another. A decrease in the rich setting paired with an increase in the lean setting fits this pattern.

  120. Question 120Behavior Reduction

    Which reinforcement history makes a behavior most resistant to extinction?

    1. Punishment of the behavior
    2. Intermittent reinforcement of the behavior Correct answer.
    3. No reinforcement history for the behavior
    4. Continuous reinforcement of the behavior

    Explanation

    Behaviors maintained on intermittent schedules are more resistant to extinction than those on dense, continuous schedules, because the learner has a history of responding through periods without reinforcement.

  121. Question 121Behavior Reduction

    Planned ignoring is most appropriate for behavior maintained by:

    1. attention from adults Correct answer.
    2. escape from instructions
    3. access to food items
    4. automatic reinforcement

    Explanation

    Planned ignoring withholds the attention that follows a behavior, so it fits behavior maintained by attention. It is used only when the behavior is not dangerous to the learner or others.

  122. Question 122Behavior Reduction

    Tokens function as conditioned reinforcers only after:

    1. they are delivered on a fixed-interval schedule
    2. the learner chooses them over other items
    3. the learner has earned at least 100 of them
    4. they are paired with backup reinforcers Correct answer.

    Explanation

    Tokens are conditioned reinforcers: they acquire value through repeated pairing with backup reinforcers the learner already wants. Without that pairing they are neutral objects.

  123. Question 123Behavior Reduction

    Immediately after a large lunch, food items stop working as reinforcers for a learner and food-related behavior drops. This change is best described as:

    1. A discriminative stimulus
    2. An establishing operation
    3. A setting event
    4. An abolishing operation Correct answer.

    Explanation

    An abolishing operation decreases the effectiveness of a reinforcer and reduces the behavior that has produced it. Being full reduces the value of food, so food-seeking behavior decreases.

  124. Question 124Behavior Reduction

    Baseline data are collected before a behavior reduction plan begins in order to:

    1. satisfy insurance documentation requirements
    2. prove that the target behavior is dangerous to others
    3. determine the learner's cognitive ability level
    4. serve as a comparison for judging treatment effects Correct answer.

    Explanation

    Baseline data describe the behavior before intervention and provide the comparison against which treatment effects are judged. Without baseline, change cannot be interpreted.

  125. Question 125Behavior Reduction

    Each time a learner tries to chew on a nonfood item, staff physically guide the learner's hand away from the mouth. This procedure is called:

    1. Response blocking Correct answer.
    2. Extinction
    3. Overcorrection
    4. Response cost

    Explanation

    Response blocking physically prevents the learner from completing the response. It is often used when the behavior is dangerous or when withholding reinforcement alone would be unsafe.

  126. Question 126Behavior Reduction

    A plan is written correctly, but staff carry out the procedures as written in only about half of sessions. The most likely result is:

    1. The data will show a clear functional relation
    2. Effects cannot be evaluated and progress may stall Correct answer.
    3. Reinforcers will lose their effectiveness
    4. The behavior will decrease faster than expected

    Explanation

    Treatment integrity, or fidelity, is the extent to which procedures are implemented as written. Low integrity means the plan's effects cannot be evaluated and behavior change is unlikely.

  127. Question 127Behavior Reduction

    A DRO plan reinforces a learner for every 10 minutes without aggression, but baseline shows aggression about every 2 minutes. Aggression continues at high rates. What is the most likely problem?

    1. The team should switch to response cost instead
    2. The plan is actually a DRL schedule
    3. The DRO interval is too long to be earned Correct answer.
    4. The backup reinforcer is not preferred by the learner at all

    Explanation

    DRO intervals are set from baseline, usually starting shorter than the typical time between responses so the learner can contact reinforcement. An interval far longer than the learner's current rate means the criterion is almost never met.

  128. Question 128Behavior Reduction

    A behavior reduction plan discontinues the consequence that previously maintained a learner's screaming. In the first few sessions screaming becomes more frequent and louder than at baseline, then gradually decreases over the following week. Which term best describes the temporary increase?

    1. Spontaneous recovery
    2. Habituation
    3. Response generalization
    4. Extinction burst Correct answer.

    Explanation

    When reinforcement for a previously reinforced response is discontinued, the response often increases briefly in rate, intensity, or duration before it declines; this temporary worsening is called an extinction burst. Staff should anticipate it, keep procedures consistent, and plan for safety rather than abandoning the plan.

  129. Question 129Behavior Reduction

    A team must write a behavioral definition of a target behavior before starting a reduction plan. Which option is the best behavioral definition?

    1. Disruption, defined as the learner not being focused on the assigned work.
    2. Self-injury, defined as the learner trying to hurt themselves on purpose.
    3. Hitting, defined as open-hand contact with another person's body. Correct answer.
    4. Aggression, defined as the learner becoming angry or upset with a staff member.

    Explanation

    A behavioral definition must describe what the behavior looks like in observable, measurable terms so two observers can agree on when it occurred. Contact between an open hand and another person's body can be seen and counted, while internal states and intent cannot.

  130. Question 130Behavior Reduction

    A team delivers reinforcement every time a learner engages in a response that physically cannot occur at the same time as the target behavior. Which differential reinforcement procedure are they using?

    1. Differential reinforcement of low rates, in which the target behavior is reinforced when it occurs less often
    2. Differential reinforcement of other behavior, in which any response except the target is reinforced
    3. Differential reinforcement of incompatible behavior Correct answer.
    4. Differential reinforcement of alternative behavior, in which a functionally equivalent replacement is reinforced

    Explanation

    DRI schedules reinforcement for a response that is topographically incompatible with the problem behavior, so engaging in the desired response prevents the problem behavior from occurring. The defining feature is physical incompatibility, not merely a lower rate or the absence of the target.

  131. Question 131Behavior Reduction

    A learner's screaming occurs mainly during instruction and has been reinforced by removal of the task. Staff now keep the task in place, continue the lesson, prompt completion, and praise compliance, and screaming no longer ends the task. Which procedure is being implemented?

    1. Positive practice
    2. Noncontingent reinforcement
    3. Response cost
    4. Escape extinction Correct answer.

    Explanation

    When a behavior is maintained by escape, extinction requires that escape no longer follow the behavior, so instructions stay in place and demands are not withdrawn. Teams typically add prompts and reinforcement for compliance so the learner can still contact escape appropriately.

  132. Question 132Behavior Reduction

    In a functional analysis, a learner's aggression is near zero in the play and alone conditions, rises sharply when the therapist turns away and works on paperwork, and stays near zero when instructions are presented. Which function is most likely?

    1. Access to tangibles
    2. Automatic reinforcement
    3. Escape from demands
    4. Access to attention Correct answer.

    Explanation

    The condition that produces the behavior identifies the maintaining reinforcer, so elevated aggression only when attention is withheld implicates attention. The demand condition functions as a comparison and helps rule out escape as the function.

  133. Question 133Behavior Reduction

    A staff phrase such as a quiet 'not right now' has no effect at first. After it is repeatedly paired with token loss and with the end of preferred activities, the phrase alone reduces the learner's behavior. The phrase is best described as a:

    1. Discriminative stimulus for reinforcement availability
    2. Primary punisher
    3. Conditioned punisher Correct answer.
    4. Negative reinforcer

    Explanation

    A neutral stimulus that acquires punishing properties through pairing with established punishers is a conditioned punisher, and pairing with several different punishers makes it a generalized conditioned punisher. Its effect depends on that learning history rather than on biological preparedness.

  134. Question 134Behavior Reduction

    Staff present two items at a time and record which item the learner selects, repeating the pairs until every item has been paired with every other item, then rank the items by how often they were selected. What is being conducted?

    1. Task analysis
    2. Functional analysis
    3. Preference assessment Correct answer.
    4. Reinforcer assessment

    Explanation

    This is a paired-stimulus (forced-choice) format, a type of preference assessment that ranks items by how often the learner approaches them. Preference assessments identify likely reinforcers, but only a reinforcer assessment shows that an item will actually increase a response.

  135. Question 135Behavior Reduction

    A learner's hand mouthing occurs at similar rates when the learner is alone, with staff, and in a group, and it does not change when attention or toys are delivered. Which approach is most appropriate?

    1. Extinction alone, because no social consequence maintains the behavior
    2. Providing competing sensory input and interrupting the response Correct answer.
    3. Delivering attention on a fixed-time schedule
    4. Removing the learner to time-out each time the behavior occurs

    Explanation

    Behavior that persists across conditions and without social consequences is likely maintained by automatic reinforcement, and social extinction cannot remove the sensory product of the behavior. Treatment typically adds matched competing stimulation and response interruption to reduce the behavior's sensory effectiveness.

  136. Question 136Behavior Reduction

    Under what circumstance is a punishment procedure most defensible within a behavior reduction plan?

    1. When the learner can already describe the punishment contingency in words
    2. When staff want the behavior to stop quickly, regardless of other options
    3. When the behavior occurs at high rates during baseline data collection
    4. When less restrictive options have failed or behavior is dangerous Correct answer.

    Explanation

    Punishment is generally an adjunct used when less intrusive, reinforcement-based procedures have been documented as insufficient or when the behavior poses a risk of harm. It still requires informed consent, objective data, monitoring for side effects, and reinforcement of appropriate alternatives.

  137. Question 137Documentation and Reporting

    Which statement is written in objective, observable terms for a session note?

    1. Client seemed tired and unmotivated today.
    2. Client had a rough day overall.
    3. Client threw the puzzle pieces off the table four times. Correct answer.
    4. Client was angry for most of the session.

    Explanation

    Objective documentation describes observable actions that a second person could see and record, including countable events. Reporting that materials were thrown four times gives verifiable information that does not depend on interpreting the client's mood or motives.

  138. Question 138Documentation and Reporting

    When should an RBT complete the session note for a client session?

    1. At the end of each month, in one batch
    2. Before the session starts, as a planning document
    3. As soon as possible after the session ends Correct answer.
    4. Only when the supervisor requests it

    Explanation

    Session notes should be completed promptly after the session, while the details are still accurate in memory. Delayed or batched notes increase errors and omissions and may violate agency or payer requirements.

  139. Question 139Documentation and Reporting

    An RBT tells a friend the client's first name and diagnosis while at a restaurant. This is best described as:

    1. A breach of client confidentiality Correct answer.
    2. Acceptable, because no records were shared
    3. A minor issue that requires no action
    4. Acceptable, because only a first name was used

    Explanation

    Confidentiality covers identifying information and clinical details, not just written records. Sharing a client's name and diagnosis with someone who is not authorized to receive that information is a breach regardless of where it happens.

  140. Question 140Documentation and Reporting

    During a session, an RBT should record data:

    1. As each instance of the target behavior occurs Correct answer.
    2. After the session ends, in the car
    3. Only if the behavior seems important that day
    4. At the end of the week from memory

    Explanation

    Data are most accurate when recorded as the behavior occurs, because memory-based recording introduces error and bias. Consistent recording across every session also keeps the data comparable over time.

  141. Question 141Documentation and Reporting

    A teacher asks the RBT for information about a client. Consistent with privacy rules, the RBT should:

    1. Email the client's full evaluation report
    2. Share only what the teacher needs to know. Correct answer.
    3. Describe the client's diagnosis and home situation
    4. Decline to speak with the teacher at any time

    Explanation

    Privacy standards require disclosing only the minimum information necessary for the stated purpose, and only when a valid authorization or release is in place. The RBT should share the relevant classroom information and follow agency procedures for confirming consent.

  142. Question 142Documentation and Reporting

    Which content belongs in an incident report?

    1. A summary of the client's progress over the past month
    2. The RBT's opinion about who caused the incident
    3. A factual account of what happened, when, and what was done Correct answer.
    4. A recommendation for a change in the client's diagnosis

    Explanation

    Incident reports are objective records describing what occurred, when and where it occurred, who was involved, and the actions taken afterward. They should be completed promptly and contain only observable facts.

  143. Question 143Documentation and Reporting

    Which word should an RBT avoid in a session note because it is subjective?

    1. Frustrated Correct answer.
    2. Hit
    3. Cried
    4. Yelled

    Explanation

    Words such as frustrated describe an inferred internal state that an observer cannot directly verify. Observable terms like cried, yelled, and hit can be defined and counted by any trained observer.

  144. Question 144Documentation and Reporting

    On an ABC data sheet, the "A" section is used to record:

    1. The consequence that followed the behavior
    2. What happened immediately before the behavior Correct answer.
    3. The date and time of the session
    4. The behavior itself

    Explanation

    ABC stands for antecedent, behavior, and consequence. The antecedent column captures the events or conditions that occurred immediately before the behavior of interest.

  145. Question 145Documentation and Reporting

    An RBT writes the wrong frequency (3 instead of 8) in a paper session note. The correct way to fix it is to:

    1. Recopy the entire note onto a new page and discard the original
    2. Use correction fluid and rewrite the number
    3. Strike one line through it, correct it, and initial Correct answer.
    4. Write over the number so it reads correctly

    Explanation

    Corrections should leave the original entry legible so the record shows what was changed and by whom. A single line through the error, the corrected entry, and the RBT's initials and date accomplish this.

  146. Question 146Documentation and Reporting

    A client arrives with bruises and reports that an adult in the home hit them. The RBT should:

    1. Ask the client's parent to explain the bruises first
    2. Wait to see whether the bruises fade before acting
    3. Report it to the supervisor and follow mandated reporting steps Correct answer.
    4. Record the bruising in the session note and monitor next week

    Explanation

    RBTs are mandated reporters and must report suspected abuse promptly according to state law and agency policy. The RBT reports the concern and does not investigate or confront the family.

  147. Question 147Documentation and Reporting

    A parent tells the RBT that the client had a tantrum at the store. In the session note, the RBT should:

    1. Leave it out, because it was not observed
    2. Describe the tantrum in detail as if it were seen
    3. Note that the parent reported the tantrum Correct answer.
    4. Write it as an observed behavior of the session

    Explanation

    Secondhand information should be attributed to its source so the record distinguishes direct observation from caregiver report. This keeps the note accurate and lets readers weigh the information appropriately.

  148. Question 148Documentation and Reporting

    An RBT collects frequency data during a session. When should the data be added to the client's graph?

    1. Whenever the supervisor asks for it
    2. Once a month, when the graph is reviewed
    3. At the end of the session, after data are totaled Correct answer.
    4. Only when the behavior improves

    Explanation

    Data are typically totaled and plotted at the end of each session so the graph stays current and reflects the most recent performance. A current graph allows timely clinical decisions by the supervising behavior analyst.

  149. Question 149Documentation and Reporting

    An RBT finishes a session in which the target behavior did not occur. The data sheet should show:

    1. A recorded zero for the session Correct answer.
    2. An "N/A" entry for the whole sheet
    3. A blank space next to the behavior
    4. A note saying "no data today"

    Explanation

    A recorded zero documents that the behavior was observed for the whole session and did not occur. A blank or vague entry cannot be distinguished from missing data, which changes how the data are interpreted.

  150. Question 150Documentation and Reporting

    A school counselor calls and asks the RBT to summarize the client's progress. The RBT should first:

    1. Ask the counselor to email a list of questions
    2. Provide a verbal summary since the call is brief
    3. Verify that a signed release authorizes the disclosure Correct answer.
    4. Read the session notes aloud over the phone

    Explanation

    Disclosure of protected health information to a third party requires verification that a valid authorization or release is on file. Once that is confirmed, the RBT shares only the information covered by the release, following agency procedure.

  151. Question 151Documentation and Reporting

    Between sessions, paper data sheets containing client names should be:

    1. Left on the desk at the clinic
    2. Recycled once the graph is updated
    3. Stored in a locked cabinet or secure location Correct answer.
    4. Kept in the RBT's bag for easy access

    Explanation

    Records that contain protected health information must be secured so that only authorized people can access them. Locked storage or approved secure locations satisfy this requirement.

  152. Question 152Documentation and Reporting

    A parent texts the RBT on the RBT's personal phone asking about session data. The best response is to:

    1. Reply with the data, since the parent has a right to it
    2. Ignore the message and say nothing
    3. Reply using initials only to protect privacy
    4. Use agency-approved channels and inform the supervisor Correct answer.

    Explanation

    Protected health information should be transmitted only through systems the agency has approved as secure. Personal devices and standard texting are generally not secure, so the RBT redirects the parent and informs the supervisor.

  153. Question 153Documentation and Reporting

    Treatment integrity (procedural fidelity) data document:

    1. How often the client engaged in the target behavior
    2. The degree to which staff implemented the plan as written Correct answer.
    3. The client's satisfaction with the program
    4. The amount of time the RBT spent on paperwork

    Explanation

    Treatment integrity data measure whether the intervention steps were delivered as described in the plan. Without these data, changes in client behavior cannot be clearly attributed to the intervention.

  154. Question 154Documentation and Reporting

    An RBT wants to measure how many math problems a client completes correctly. The best permanent product to review is:

    1. A caregiver's verbal report of the session
    2. A tally of the client's off-task glances
    3. The RBT's memory of the session
    4. The completed worksheet with the client's answers Correct answer.

    Explanation

    A permanent product is a tangible outcome that remains after the behavior and can be measured later. The completed worksheet allows the RBT to count correct answers after the session ends.

  155. Question 155Documentation and Reporting

    Session start and end times in documentation should reflect:

    1. The scheduled times on the calendar
    2. Rounded times to the nearest half hour
    3. The times the RBT arrived at and left the building
    4. The actual times the RBT was with the client Correct answer.

    Explanation

    Documented times should accurately represent when the service was delivered, because the record supports billing and clinical accountability. Recording scheduled or rounded times misrepresents the service provided.

  156. Question 156Documentation and Reporting

    At the end of a session, the RBT gives the caregiver a brief summary. The summary should:

    1. Use technical terms so the caregiver can learn the language
    2. Predict how quickly the client will meet goals
    3. Describe what the client did and what the team is working on Correct answer.
    4. Explain the likely cause of the client's behavior

    Explanation

    Caregiver summaries should be objective, jargon-free descriptions of the session and the current treatment targets. Explaining causes or predicting timelines goes beyond the RBT's role and the data.

  157. Question 157Documentation and Reporting

    An RBT realizes the session's data sheet was left at the client's home and cannot be retrieved before the note is due. The RBT should:

    1. Ask a coworker to write down approximate values
    2. Estimate the numbers and record them as collected data
    3. Leave the data blank and note nothing
    4. Tell the supervisor and document that the data were lost Correct answer.

    Explanation

    Documentation must be accurate, so estimated or invented values cannot be entered as collected data. The RBT reports the loss to the supervisor and records that the data are unavailable, following agency procedures for missing data.

  158. Question 158Documentation and Reporting

    A parent asks the RBT to change a session note so it shows more progress than occurred. The RBT should:

    1. Add the parent's version to the note without comment
    2. Change the note slightly to keep the parent satisfied
    3. Decline and report the request to the supervisor Correct answer.
    4. Agree, since the parent has the right to review records

    Explanation

    Session notes must accurately reflect what was observed and measured, and altering them to show false progress is falsification. The RBT declines, informs the supervisor, and may help the parent raise concerns through appropriate channels.

  159. Question 159Documentation and Reporting

    An RBT is asked to sign a note for a session that a colleague delivered, stating the RBT provided the service. The RBT should:

    1. Ask the colleague to sign it too
    2. Sign and add a small note in the margin
    3. Sign, because the client did receive the service
    4. Refuse and report the request to a supervisor Correct answer.

    Explanation

    Signing a note for a service the RBT did not provide is falsification of records and can constitute billing fraud. The RBT must refuse and report the request through the agency's compliance channels.

  160. Question 160Documentation and Reporting

    Two RBTs independently record the same client's behavior during a session and later compare their records. This procedure produces:

    1. A permanent product sample
    2. An interobserver agreement measure Correct answer.
    3. A social validity rating
    4. A treatment integrity check

    Explanation

    Interobserver agreement is calculated when two observers independently record the same behavior during the same observation period and their records are compared. High agreement supports the believability of the data.

  161. Question 161Documentation and Reporting

    A person who says they are the client's aunt calls the clinic and asks the RBT to send the client's records. The RBT should:

    1. Refer the request to the supervisor or records staff for verification Correct answer.
    2. Send the records, because the caller is a relative
    3. Read a summary over the phone instead of sending records
    4. Ask the caller to pick up copies at the front desk

    Explanation

    Requests for records require verification of the requester's identity and legal authority to receive the information. The RBT does not release records independently and forwards the request to those responsible for authorization.

  162. Question 162Documentation and Reporting

    An RBT finishes a session at 4:00 p.m. and has no further client contact that day. Standard documentation practice requires the session note to be completed:

    1. by the end of the workday, while details are fresh Correct answer.
    2. the following week, after progress has been reviewed with the caregiver
    3. only when the supervising behavior analyst requests it
    4. at the end of the pay period, once all sessions have been summarized

    Explanation

    Session notes should be written as soon as possible after the session, before details fade or get blended with later sessions. Timely completion also keeps the record available for the supervisor's review and for billing or audit purposes. Waiting for a request, a pay period, or a later week allows memories to become inaccurate.

  163. Question 163Documentation and Reporting

    During a session, an RBT tallies 12 instances of a client leaving the assigned work area. To report this as a rate rather than a simple count, the RBT's documentation must also include:

    1. the number of staff present in the room
    2. the length of the observation period Correct answer.
    3. the percentage of intervals containing the behavior
    4. the client's mood at the start of the session

    Explanation

    Rate expresses the number of responses per unit of time, so a count alone cannot produce a rate. The RBT must record how long the behavior was observed so the count can be divided by that time period. Mood ratings, staffing, and interval percentages do not supply the time dimension a rate requires.

  164. Question 164Documentation and Reporting

    An RBT discovers that a behavior count entered into the agency's electronic data system is wrong. The most appropriate action is to:

    1. leave the entry as written and mention the error verbally at the next team meeting
    2. delete the incorrect entry and re-enter the correct count
    3. start a new data series in the system so the old error is no longer shown
    4. submit a dated correction that keeps the original entry visible Correct answer.

    Explanation

    Electronic records must preserve an auditable trail, so errors are corrected through a dated amendment that leaves the original entry intact and explains the change. Simply deleting or hiding the entry destroys the record's integrity. Verbal mention does not correct the written record.

  165. Question 165Documentation and Reporting

    An RBT wants to post on a personal social media account about a client's first successful trip to a community store. The most appropriate action is for the RBT to:

    1. post the story only if the caregiver gives verbal approval
    2. post the story without using the client's name
    3. post the story only in a private group for coworkers
    4. refrain from posting any information about the client Correct answer.

    Explanation

    Client information may not be disclosed on personal social media in any form, including stories that omit a name but describe identifying details. Verbal caregiver approval is not the same as formal written consent, and a closed coworker group is still an unsecured disclosure. The safest and required course is not to post at all.

  166. Question 166Documentation and Reporting

    Midway through a session, an RBT is unsure whether a client's response counts as an instance of the target behavior defined in the behavior plan. The RBT should:

    1. record the response as an occurrence so that no possible instance of the behavior is missed
    2. follow the written definition closely and note the ambiguity for the supervisor Correct answer.
    3. stop collecting data on that behavior for the remainder of the session
    4. ask the caregiver to decide whether the response should be counted

    Explanation

    Data are only comparable across sessions when the written operational definition is applied consistently, so the RBT follows the definition as written and flags the ambiguity for the supervisor. Recording guesses, stopping data collection, or delegating the decision to a caregiver all introduce error into the record.

  167. Question 167Documentation and Reporting

    An RBT implemented a token system and differential reinforcement of alternative behavior during a session. For the session note to fully document the procedures used, the RBT should:

    1. summarize only the procedures that appeared to work
    2. list the procedures by name without describing what was actually done during the session
    3. describe the procedures in the next monthly progress report instead
    4. describe each procedure as implemented and the client's response with data Correct answer.

    Explanation

    A complete note documents the behavior-analytic procedures actually delivered and the client's response, supported by the objective data collected. Naming procedures without describing implementation does not show what the client received. Reporting only successful procedures or deferring the description to a later report leaves the current session record incomplete.

  168. Question 168Documentation and Reporting

    An RBT's data sheet shows that a client's aggression occurred 9 times in the first 30 minutes of a 2-hour session and once in the remaining 90 minutes. The most accurate way to document this session is to:

    1. report only the second half of the session, since it reflects the client's typical performance
    2. hold the data until the pattern is confirmed in the next session
    3. report a single session rate of 5 responses per hour
    4. report the total count and note how the responses were distributed across the session Correct answer.

    Explanation

    Documentation should convey the data as recorded, and a strong within-session pattern is clinically important information. A single averaged rate of 5 per hour hides the fact that nearly all responses occurred early in the session, which is exactly the detail the supervisor needs. Selecting one portion of the session or delaying the report would misrepresent or omit collected data.

  169. Question 169Professional Conduct and Ethics

    A client's neighbor stops an RBT in the hallway and asks how the client is progressing in services. What is the most appropriate response?

    1. The client is doing well and making progress.
    2. I can only tell you what the client's records show.
    3. I can't share information about clients; please contact the office. Correct answer.
    4. You should ask the client's parents for details.

    Explanation

    Client information may be shared only with authorized people. When an unauthorized person asks, the RBT should not confirm or deny anything and should redirect the request to the agency.

  170. Question 170Professional Conduct and Ethics

    An RBT observes unexplained bruises on a client and suspects abuse. What should the RBT do?

    1. Watch the bruises for a week before acting.
    2. Ask the client what happened and document it.
    3. Report to authorities and inform the supervisor. Correct answer.
    4. Wait until the next team meeting to report it.

    Explanation

    Suspected abuse or neglect must be reported promptly to the appropriate authorities, and the supervisor should be informed. RBTs do not investigate allegations themselves.

  171. Question 171Professional Conduct and Ethics

    Which task is within an RBT's role when supervised?

    1. Implementing a supervisor-written teaching procedure. Correct answer.
    2. Designing a behavior intervention plan independently.
    3. Diagnosing a new disorder.
    4. Changing the behavior plan without telling the supervisor.

    Explanation

    RBTs implement procedures designed and approved by the supervising behavior analyst. They do not independently design or alter behavior plans.

  172. Question 172Professional Conduct and Ethics

    An RBT finishes a session and realizes data were not recorded in real time. What is the ethical action?

    1. Leave the data blank and say nothing.
    2. Estimate the data and record as if collected live.
    3. Ask another RBT to enter data for the session.
    4. Record the data promptly and document the delayed entry. Correct answer.

    Explanation

    Documentation should be accurate and timely. If data entry is delayed, the RBT records the data as soon as possible and notes the delay rather than estimating or hiding it.

  173. Question 173Professional Conduct and Ethics

    A client's family offers an RBT a $200 gift card after a good week. What should the RBT do?

    1. Accept it because the family chose to give it.
    2. Accept it but share it with the team.
    3. Accept it and hide it from the supervisor.
    4. Decline the gift and explain agency policy. Correct answer.

    Explanation

    Accepting valuable gifts can create a conflict of interest or appear to influence services. Agency policy typically requires declining or following an approval process.

  174. Question 174Professional Conduct and Ethics

    The RBT is unsure how to run a procedure. What should the RBT do?

    1. Ask the supervising analyst for guidance. Correct answer.
    2. Ask the client's teacher what to do.
    3. Skip the procedure until next month.
    4. Try a different procedure from memory.

    Explanation

    RBTs practice within their competence and under supervision. When unsure, they seek guidance from the supervising behavior analyst rather than improvising.

  175. Question 175Professional Conduct and Ethics

    An RBT wants to post about a breakthrough at work. Which post is ethical?

    1. A description of the client's diagnosis and progress.
    2. A video of the session with the client's face blurred.
    3. A photo of the client with the caption 'Huge win today!'
    4. A post about early intervention with no client details. Correct answer.

    Explanation

    Confidentiality applies online. Posts must not include identifying details, images, or videos of clients, even blurred ones.

  176. Question 176Professional Conduct and Ethics

    A client's parent invites the RBT to a family birthday party. What is the best response?

    1. Attend because it will strengthen the therapeutic rapport.
    2. Politely decline and explain professional boundaries. Correct answer.
    3. Attend but avoid discussing any therapy topics.
    4. Attend only if at least two other staff members come too.

    Explanation

    RBTs maintain professional boundaries and avoid social relationships with clients and families. Attending a personal event can blur boundaries.

  177. Question 177Professional Conduct and Ethics

    Before starting a new skill program, the supervisor says consent was obtained last year. What should the RBT confirm?

    1. That consent is verbal only.
    2. That consent is current and covers these procedures. Correct answer.
    3. That the signed consent form is kept in the RBT's car.
    4. That the client can repeat the treatment plan from memory.

    Explanation

    Services require informed consent that is current and covers the procedures being implemented. The RBT should confirm this with the supervisor before proceeding.

  178. Question 178Professional Conduct and Ethics

    An RBT learns that a new client is the child of a close friend. What should the RBT do?

    1. Ask the friend to keep the relationship secret.
    2. Provide services but avoid talking about the friendship.
    3. Continue because the friendship is not a professional issue.
    4. Tell the supervisor about the relationship before starting. Correct answer.

    Explanation

    A pre-existing personal relationship with a client's family creates a potential multiple relationship. The RBT should disclose it before services begin so the supervisor can decide how to proceed.

  179. Question 179Professional Conduct and Ethics

    A family's cultural practices conflict with a planned procedure. What should the RBT do?

    1. Raise the concern with the supervisor and team. Correct answer.
    2. Tell the family their practices are wrong.
    3. Stop services without telling anyone.
    4. Ignore the family's views and follow the plan exactly.

    Explanation

    Culturally responsive services require discussing family practices and preferences with the supervisor and team. The plan may need adjustment to respect the family's values.

  180. Question 180Professional Conduct and Ethics

    An RBT is assigned a procedure they have never been trained to implement. What should the RBT do?

    1. Practice on the client and learn as they go.
    2. Tell the supervisor and request training first. Correct answer.
    3. Ask the client's sibling to help.
    4. Watch a video and proceed without telling anyone.

    Explanation

    RBTs must be trained and competent before implementing procedures. They should inform the supervisor and request training.

  181. Question 181Professional Conduct and Ethics

    A supervisor asks the RBT to change recorded data to show better progress. What should the RBT do?

    1. Refuse and quietly tell other RBTs.
    2. Change the data because the supervisor is in charge.
    3. Change only a few numbers to avoid conflict.
    4. Refuse and report the request through proper channels. Correct answer.

    Explanation

    Falsifying data is unethical. The RBT must refuse and report the request through the appropriate channels.

  182. Question 182Professional Conduct and Ethics

    A client's family decides to stop services. What is the RBT's ethical responsibility?

    1. Stop all communication with the family immediately.
    2. Convince the family to continue services for at least a month.
    3. Keep the client's file at home for future reference.
    4. Follow the supervisor's transition plan for ending services. Correct answer.

    Explanation

    When services end, the RBT follows the supervisor's transition plan and ensures the client is not abruptly abandoned. Communication and records remain governed by agency policy.

  183. Question 183Professional Conduct and Ethics

    An RBT is providing services in a home. The supervisor has not observed or met with the RBT for several weeks. What should the RBT do?

    1. Document that supervision occurred.
    2. Ask the parent to serve as supervisor.
    3. Continue without saying anything because the supervisor is busy.
    4. Contact the supervisor to arrange required supervision. Correct answer.

    Explanation

    RBTs are responsible for ensuring they receive the required supervision. If supervision is not occurring, they should contact the supervisor to arrange it.

  184. Question 184Professional Conduct and Ethics

    A parent asks the RBT for advice about a suspected speech delay. What should the RBT do?

    1. Say the delay is unrelated to behavior analysis.
    2. Recommend a specific speech therapist you know.
    3. Give the parent a diagnosis based on your observations.
    4. Suggest the parent talk with the supervisor or pediatrician. Correct answer.

    Explanation

    RBTs do not diagnose or recommend specific providers outside their role. They should direct the parent to the supervisor or an appropriate medical professional.

  185. Question 185Professional Conduct and Ethics

    A client is engaging in dangerous behavior. The RBT has no training in restraint. What should the RBT do?

    1. Hold the client until the behavior stops.
    2. Leave the client alone without assistance.
    3. Follow the safety plan and summon trained help. Correct answer.
    4. Use a restraint technique seen online.

    Explanation

    Safety procedures must follow the approved plan and the RBT's training. If not trained in restraint, the RBT should use approved safety steps and summon trained help.

  186. Question 186Professional Conduct and Ethics

    An RBT makes an error in a session note. What is the ethical way to correct it?

    1. Delete the entire note and start over from scratch.
    2. Follow policy for a dated correction that keeps the original. Correct answer.
    3. Erase the error so the note looks clean and professional.
    4. Write over the error with a darker pen until it is unreadable.

    Explanation

    Corrections to records must preserve the original entry and follow agency policy. A dated correction maintains accuracy and transparency.

  187. Question 187Professional Conduct and Ethics

    The RBT is asked to bill for a session that was canceled. What should the RBT do?

    1. Bill it because the slot was reserved.
    2. Bill for half the session.
    3. Bill it and note 'makeup' later.
    4. Refuse and report the request to compliance. Correct answer.

    Explanation

    Billing for services not delivered is fraud. The RBT should refuse and report the request through compliance or supervisory channels.

  188. Question 188Professional Conduct and Ethics

    An RBT is offered money by a family to work extra hours without agency approval. What should the RBT do?

    1. Negotiate a lower private hourly rate with the family.
    2. Accept the money and work privately on weekends.
    3. Decline and explain that services go through the agency. Correct answer.
    4. Accept the money and tell the supervisor later.

    Explanation

    Private arrangements outside the agency can create dual relationships and bypass supervision and billing rules. The RBT should decline and direct the family through the agency.

  189. Question 189Professional Conduct and Ethics

    An RBT faces an ethical dilemma not covered by policy. What is the best first step?

    1. Identify the issue, then consult the supervisor and policy. Correct answer.
    2. Ask the client's family to make the ethical decision.
    3. Make the decision alone so the session is not delayed.
    4. Wait until the dilemma resolves itself without action.

    Explanation

    Ethical decision-making starts with clarifying the issue and consulting the supervisor, code, and policy. Deciding alone or delaying can increase risk.

  190. Question 190Professional Conduct and Ethics

    An RBT is subpoenaed to testify about a client. What should the RBT do?

    1. Bring the client's full record to court without notifying anyone.
    2. Notify the supervisor and get legal guidance before disclosing. Correct answer.
    3. Discuss the case with the opposing lawyer before notifying anyone.
    4. Refuse to appear in court and ignore the subpoena.

    Explanation

    A subpoena requires legal guidance. The RBT should notify the supervisor and follow agency and legal direction before releasing any client information.

  191. Question 191Professional Conduct and Ethics

    An RBT's friend asks to hire the RBT privately for behavior support, outside the agency. What is the ethical concern?

    1. It is fine if the RBT charges a discounted fee.
    2. It creates a dual relationship and may violate supervision rules. Correct answer.
    3. No concern, because the friend personally requested the service.
    4. It is fine if the RBT uses the agency's materials.

    Explanation

    Providing private services to a friend creates a dual relationship and may exceed the RBT's scope and supervision requirements. Such arrangements should go through the agency.

  192. Question 192Professional Conduct and Ethics

    A supervisor directs an RBT to use a punishment procedure not in the client's plan. What should the RBT do?

    1. Do not implement it and report the concern. Correct answer.
    2. Ask the family to approve it first.
    3. Implement it because a supervisor ordered it.
    4. Modify the plan to include it quietly.

    Explanation

    RBTs implement only procedures in the approved plan and within their training. They should not carry out an unauthorized punishment procedure and should report the concern.

  193. Question 193Professional Conduct and Ethics

    An RBT reads an online claim about a miracle cure and wants to use it. What is the ethical response?

    1. Post about the cure on social media.
    2. Discuss it with the supervisor before using it. Correct answer.
    3. Recommend it to families immediately.
    4. Try it on one client and collect data.

    Explanation

    RBTs use evidence-based procedures approved by the supervisor. They should discuss questionable claims with the supervisor rather than trying or promoting them.

  194. Question 194Professional Conduct and Ethics

    An RBT is at a coffee shop with a coworker and begins describing a client's tantrums, including the client's full name and school. What is the ethical problem with this conversation?

    1. Identifying client information is being shared in a public place Correct answer.
    2. Tantrum data may only be shared with the client's extended family
    3. Coworkers on the same case may never discuss a client together
    4. The RBT should have waited until the client was present to talk

    Explanation

    Confidentiality requires that client information be discussed only with authorized people, in a private setting, and only when there is a legitimate clinical need. A coffee shop is not a private setting, and naming the client and school makes the person identifiable to bystanders. Even coworkers should limit case discussion to appropriate, secure contexts.

  195. Question 195Professional Conduct and Ethics

    When should an RBT complete documentation of a session?

    1. As soon as possible after the session, consistent with agency policy Correct answer.
    2. At the end of the month, once all sessions have been delivered
    3. Before the session begins, using the data the RBT expects to collect
    4. Only when the supervisor asks to review the notes before a meeting

    Explanation

    Documentation should be completed promptly after the session so the record is accurate and reflects what actually occurred. Agencies typically set a specific timeline, and the RBT follows that policy. Delayed or pre-written notes risk errors and misrepresentation of services.

  196. Question 196Professional Conduct and Ethics

    A family whose child has made strong progress gives the RBT a $100 gift card and says it is a personal thank-you. What should the RBT do?

    1. Accept it and then split the value with the other technicians on the case
    2. Decline the gift and explain the agency's policy on gifts Correct answer.
    3. Accept it, because the family offered it freely and no one pressured the RBT
    4. Accept it without telling the supervisor or the agency

    Explanation

    Gifts of significant value create a dual relationship and can influence clinical objectivity, so the RBT declines and explains the applicable policy. Thanking the family warmly while redirecting to other ways of showing appreciation keeps the relationship professional. Agency policy governs small token gifts and must be consulted.

  197. Question 197Professional Conduct and Ethics

    During a home session, an RBT notices unexplained bruises on the client and sees the client flinch when a parent approaches. What should the RBT do?

    1. Ask the parent to explain the bruises and accept the answer if plausible
    2. Note the observation in the session record and monitor it next week
    3. Report the suspicion to the authorities as required by law Correct answer.
    4. Wait to see whether the bruises fade before deciding to say anything

    Explanation

    RBTs are mandated reporters in most jurisdictions and must report suspected abuse or neglect to the designated authority promptly. The RBT does not investigate, verify, or resolve the suspicion personally. Agency policy and law specify who is contacted and in what timeframe.

  198. Question 198Professional Conduct and Ethics

    A parent asks the RBT to write a behavior intervention plan because the supervising behavior analyst is busy. What should the RBT do?

    1. Ask the family to sign a release and then write the plan
    2. Decline and tell the parent the request will go to the supervising behavior analyst Correct answer.
    3. Write the plan because the RBT has collected most of the client's session data
    4. Write the plan and have another technician review it before the family uses it

    Explanation

    Designing intervention plans requires the training and credentials of the supervising behavior analyst and falls outside the RBT's defined role. The RBT implements plans under supervision rather than authoring them. Redirecting the request protects the client and keeps practice within the RBT's scope.

  199. Question 199Professional Conduct and Ethics

    An agency policy instructs RBTs to keep restraint use undocumented to avoid regulatory scrutiny. The certifying board's ethics code requires accurate documentation of all interventions. How should the RBT resolve this conflict?

    1. Suspend all services until the agency and the board settle the conflict
    2. Follow the agency policy, because employers set the enforceable practice standards
    3. Follow whichever course the client's family prefers after being informed of both
    4. Follow the ethics code, because it takes precedence over conflicting agency policy Correct answer.

    Explanation

    When agency policy conflicts with the ethics code, the code governs, and the RBT is expected to comply with it and to avoid participating in the policy. The RBT should also raise the conflict through appropriate channels rather than conceal it. Documenting accurately protects the client and the RBT.

  200. Question 200Professional Conduct and Ethics

    A supervisor asks an RBT to initial a supervision log for two months of meetings that never took place, saying the paperwork is just a formality. What is the RBT's most appropriate action?

    1. Initial the log but keep a private note stating the meetings never occurred
    2. Initial only the months in which the RBT had some contact with the supervisor
    3. Initial the log, since the supervisor is responsible for the accuracy of supervision records
    4. Refuse to initial the log and report the request through appropriate channels Correct answer.

    Explanation

    Signing a supervision log attests that supervision occurred, so initialing false entries is falsification regardless of who requests it. The RBT refuses and reports the request to the agency and, as appropriate, the certifying board. A private note does not undo the misrepresentation created by the signature.

RBT flashcards

32 cards. Read the term and the definition here. The deck at the top of this page is optional.

Rate
A ratio of response count to a standard unit of time, such as responses per minute. Rate is preferred over frequency when observation time varies across sessions.
Latency
The elapsed time from the onset of a stimulus or instruction to the beginning of the target response, typically reported as an average across the opportunities in a session.
Interresponse time (IRT)
The time that elapses between two consecutive occurrences of the same behavior. IRT data describe the pacing of behavior, such as rapid repetitive movements.
Partial interval recording
A discontinuous method marking each interval in which the behavior occurs at any point. It tends to overestimate behavior because one response scores an entire interval.
Whole interval recording
Marking an interval only if the behavior continues for the entire interval. This method tends to underestimate the true occurrence of the behavior being observed.
Momentary time sampling
Recording whether the behavior is occurring exactly at the end of each interval. It yields an estimate with less observation burden and does not require continuous attention.
Permanent product measurement
Measuring behavior through the tangible environmental effects it produces, such as completed worksheets or a cleaned room, recorded after the behavior has already occurred.
Paired stimulus assessment
A preference assessment presenting two items at a time across repeated trials and recording which item is chosen, producing a ranked order of presumed reinforcers.
Multiple stimulus without replacement (MSWO)
Presenting an array of items, allowing one choice, and removing the chosen item before the next trial. Repeated trials produce a ranked preference hierarchy.
Functional analysis
An experimental assessment that systematically manipulates antecedents and consequences across conditions such as attention, escape, tangible, and alone to identify the function of behavior.
ABC data collection
A descriptive recording method noting the antecedent, behavior, and consequence for each occurrence. It suggests possible functions but does not demonstrate cause and effect.
Scatterplot
A grid display marking the times or activities during which a behavior occurs, used to identify temporal patterns and generate hypotheses during descriptive assessment.
Discriminative stimulus
A stimulus in the presence of which a specific response has previously been reinforced. Its presence signals that reinforcement is currently available for the target behavior.
Most-to-least prompting
A prompt hierarchy that begins with the most intrusive prompt and fades to less intrusive prompts across trials, supporting errorless learning of a new skill.
Time delay prompting
Waiting a set number of seconds after the instruction before delivering a prompt, giving the learner a chance to respond independently and fading prompts gradually.
Backward chaining
A chaining procedure in which the trainer completes all steps except the last, then teaches steps in reverse order until the learner performs the entire chain.
Shaping
Reinforcing successive approximations of a target behavior while withholding reinforcement for earlier approximations, used to build behaviors not yet in the learner's repertoire.
Variable ratio schedule
A reinforcement schedule delivering reinforcement after an unpredictable number of responses, producing high and steady response rates that resist extinction.
Extinction
Discontinuing the reinforcement that previously maintained a behavior. The behavior typically decreases gradually and may temporarily increase before it begins to improve.
Extinction burst
A temporary increase in the frequency, intensity, or variability of a behavior at the start of extinction. It is expected and does not mean the procedure is failing.
Differential reinforcement of alternative
Reinforcing a functionally equivalent replacement behavior while withholding reinforcement for the problem behavior, reducing the problem behavior by strengthening an alternative response.
Differential reinforcement of other
Delivering reinforcement after an interval in which the problem behavior did not occur, regardless of what other behavior the learner engaged in during that interval.
Response cost
A punishment procedure in which a specified amount of reinforcement is removed contingent on the problem behavior, such as loss of tokens, points, or privileges.
Noncontingent reinforcement
Delivering the reinforcer that maintains problem behavior on a time-based schedule regardless of behavior, reducing the motivation to engage in the problem behavior.
SOAP notes
A note format organized into subjective, objective, assessment, and plan sections, where the objective section documents observable, measurable facts rather than opinions or interpretation.
Objective documentation
Recording only directly observable, measurable facts including dates, times, and counts, without opinions, labels, or speculation about the client's internal states.
Line graph
A graph with time or sessions on the x-axis and the behavior measure on the y-axis, used to show trends in continuous data across successive sessions.
Bar graph
A graph using separate bars to display and compare discrete sets of data, such as performance across different conditions, settings, or individuals.
RBT supervision requirements
The RBT must receive supervision for at least five percent of hours worked each month, including at least two meetings, one of them individual and face-to-face.
Scope of practice
The range of activities an RBT may perform, which includes implementing behavior plans under close supervision but excludes independently designing assessments or interventions.
Dual relationship
Holding a second role with a client or family, such as friend or business partner, that could impair professional judgment and create a conflict of interest.
Informed consent
Obtaining voluntary agreement from the client or legally authorized representative after explaining procedures, risks, benefits, and alternatives before services or changes begin.

RBT study guide

Measurement

Measurement foundations

Measurement begins with an operational definition: observable, measurable, and complete enough that two observers could agree. Continuous methods capture every response: frequency/event count, rate (count divided by time), duration, latency (time from instruction or SD to response onset), and inter-response time. Discontinuous methods sample: whole-interval recording scores an interval only if behavior occurs throughout, so it usually underestimates; partial-interval scores any occurrence, so it usually overestimates; momentary time sampling checks whether behavior is occurring at the instant of each interval. Permanent products record tangible outcomes. Graph data to inspect level, trend, and variability, and compare baseline with intervention. Interobserver agreement (IOA) supports believability: total-count, mean-count-per-interval, exact-interval, and trial-by-trial formulas. Treatment integrity data show whether procedures were run as planned. Traps: choosing duration when the question asks how long until behavior starts (latency); reporting frequency when session lengths differ (use rate); assuming partial-interval equals true duration; and treating IOA as a measure of the client. Also watch for undefined response classes and missed recording opportunities. Worked example: In a 10-minute session a learner emits 20 hand raises. Rate = 20 ÷ 10 = 2 per minute. If a 20-interval partial-interval record shows 12 intervals with any hand raise, report 12/20 = 60% of intervals, not 20 responses. Rule of thumb: define the behavior and its dimension first, then select the measurement system that captures that dimension with the least bias.

Assessment

Assessment essentials

Assessment answers two questions: what is happening, and why. Indirect methods-interviews, questionnaires, rating scales-gather history and caregiver report quickly but are subjective. Direct methods-ABC narrative or checklist recording, scatterplots, and direct observation-link antecedents, behavior, and consequences as they occur. Functional analysis experimentally manipulates conditions (for example, attention, escape, access to tangibles, alone) to identify function; descriptive assessment suggests correlations but cannot prove cause. Preference assessments identify potential reinforcers: free operant (watch what the learner chooses), paired stimulus (two choices), multiple stimulus with replacement, and multiple stimulus without replacement (MSWO). A preference is not automatically a reinforcer; reinforcer effectiveness must be demonstrated by behavior change. Baseline data establish comparison before intervention. Traps: calling an interview a functional analysis; confusing preference with reinforcer; ranking a stimulus as preferred when it was never selected; ignoring medical, sensory, or safety issues that need referral; and failing to obtain consent or assent. Also distinguish skill deficits from performance deficits. Worked example: An MSWO presents five items; the learner selects puzzle, then ball, then bubbles. The ranking is puzzle > ball > bubbles, but the team then tests puzzle versus ball as consequences and finds only puzzle increases responding. Puzzle is the reinforcer; ball remains a preferred item. Rule of thumb: assess first, then verify with data.

Skill Acquisition

Skill acquisition

Begin with a measurable target definition and a task analysis when the skill has multiple steps. Chaining teaches step sequences: forward chaining teaches the first step to criterion before adding the next; backward chaining teaches the last step first and adds earlier steps; total-task presentation runs the whole sequence each trial. Prompting supports correct responding: verbal, gestural, model, physical, and visual prompts, arranged from least-to-most or most-to-least depending on the plan. Fade prompts systematically (time delay, prompt hierarchy) to avoid prompt dependence. Shaping reinforces successive approximations; discrimination training teaches when a response is reinforced under a specific SD and not others. Reinforcement should be contingent, timely, and paired with praise; thin schedules gradually. DTT offers structured massed trials, while NET teaches in natural routines. Plan generalization across people, settings, materials, and time, and maintenance checks after mastery. Data on response accuracy, prompt level, and independence guide decisions. Traps: reinforcing the prompt instead of the response; advancing before mastery criteria are met; mixing target and mastered items without a plan; and assuming a skill generalized because it occurred once. Also watch for error correction that inadvertently reinforces errors. Worked example: Handwashing is taught backward. The therapist completes all steps except drying hands, prompts drying, and reinforces. After drying is independent, the learner is prompted to turn off water, then dry. Rule of thumb: prompt only as much as needed, reinforce the terminal behavior, and fade deliberately.

Behavior Reduction

Behavior reduction

Behavior reduction starts with assessment of function: attention, escape or avoidance, access to tangibles or activities, or automatic/sensory consequences. Build a competing-behavior plan: antecedent modifications (environment, scheduling, offering choices, priming), teaching a functionally equivalent replacement behavior, and consequence strategies. Extinction withholds the maintaining reinforcer; expect an extinction burst, variability, and spontaneous recovery, and plan safety. Differential reinforcement includes DRA (reinforce alternative behavior), DRI (reinforce incompatible behavior), DRO (reinforce absence of behavior during an interval), and DRL (reinforce lower rates). Response cost and time-out are restrictive; use only when authorized, monitored, and paired with reinforcement. Punishment may suppress behavior but does not teach replacement skills and can have side effects. Crisis procedures prioritize safety, least restrictive intervention, and documentation. Collect data on target and replacement behaviors to evaluate effects. Traps: using DRO when the goal is to teach a specific alternative; calling any reduction extinction when the reinforcer was not identified; ignoring the function; and implementing restrictive procedures without consent or oversight. Also distinguish DRI from DRA. Worked example: A learner screams to escape difficult work. The team reduces task difficulty briefly, teaches ‘break, please,’ and reinforces that request with a short break while screaming no longer produces escape. This is DRA with extinction of screaming. Rule of thumb: replace the function, not just the behavior.

Documentation and Reporting

Documentation and reporting

Documentation creates a factual, contemporaneous record. Write objective descriptions of observable events: what happened, when, where, who was present, what was said or done, and the response. Avoid labels, opinions, and speculation (‘angry,’ ‘manipulative,’ ‘wanted attention’). Use quotes when exact wording matters. Session notes should link to goals, data, interventions, and response to intervention. Incident reports describe injuries, aggression, restraint, or unusual events without blame and are completed promptly per policy. Graphs and data sheets must be accurate, dated, and attributable; correct errors according to agency procedure rather than covering them up. Confidentiality is required: share only with authorized persons, secure records, and follow HIPAA/FERPA and organizational rules. Mandated reporting duties override confidentiality when abuse or neglect is suspected. Report to supervisors promptly and within required timelines. Traps: subjective language, missing times, late entries, altering another person’s record, discussing clients in public, and including unnecessary identifying details in emails. Also distinguish observation from interpretation. Worked example: Instead of ‘Client was defiant and lazy,’ write: ‘At 10:15 a.m. in the classroom, after being asked to start math, client said No twice, pushed the worksheet away, and put his head on the desk for 4 minutes.’ Rule of thumb: if you did not see or hear it, do not document it as fact.

Professional Conduct and Ethics

Professional conduct and ethics

RBTs follow the BACB ethics requirements and employer policies: prioritize client welfare and dignity, practice within scope and competence, obtain informed consent (and client assent where applicable), and maintain confidentiality. Supervision is required; seek help when a situation exceeds your training. Avoid dual relationships, bartering, and gifts that could exploit or impair objectivity; follow clear boundaries in social media and community contacts. Be culturally responsive and use least restrictive, evidence-based procedures. Data and billing must be truthful; never fabricate, falsify, or backdate records. Report suspected abuse, neglect, or unethical conduct through proper channels. Traps: accepting a client’s expensive gift, becoming friends with a client’s family, giving advice outside your role, discussing cases publicly, or continuing a procedure you are not trained to run. Also watch for conflicts between caregiver requests and client welfare, and for pressure to bill services not delivered. Worked example: A parent offers a $100 gift card after services. Thank the parent, decline politely, explain agency policy, and suggest a card or note instead if allowed. Document the offer and your response per policy. Rule of thumb: when uncertain, ask your supervisor and choose the option that protects the client’s welfare, dignity, and confidentiality.

RBT cheat sheet

Quick reference

Measurement

  • Continuous measurement methods: frequency (count), rate (count ÷ time), duration (total duration or duration per occurrence), latency (stimulus onset to response onset), and interresponse time (time between consecutive responses).

  • Rate formula: count ÷ observation time; use rate instead of frequency whenever session or observation lengths differ across sessions.

  • Percentage of opportunities formula: (occurrences ÷ total opportunities) × 100; trials-to-criterion counts the number of trials needed to reach a preset performance level.

  • Total count IOA formula: (smaller count ÷ larger count) × 100; trial-by-trial IOA formula: (agreements ÷ total trials) × 100; interval-by-interval IOA: (agreements ÷ intervals) × 100.

  • Acceptable IOA is generally 80% or higher, with 90% or higher preferred for discrete, easily counted behaviors; IOA is calculated by a second observer recording independently.

  • Partial interval recording overestimates behavior, whole interval recording underestimates behavior, and momentary time sampling records only whether behavior is occurring at the end of each interval.

  • Permanent product measurement records the tangible environmental effect of a behavior after it occurs, such as completed worksheets, folded laundry, or a clean table.

  • Graph conventions: x-axis shows time or sessions, y-axis shows the behavior measure, data points are connected within a condition but not across phase change lines.

Quick reference

Assessment

  • Preference assessment methods in order of increasing structure: free operant, single stimulus, paired stimulus (forced choice), multiple stimulus with replacement (MSW), multiple stimulus without replacement (MSWO).

  • Paired stimulus and MSWO assessments produce a ranked hierarchy of preferred items; MSW does not produce a rank order because each chosen item is returned to the array.

  • Indirect assessments (interviews, FAST, MAS, QABF) rely on caregiver or client report and do not involve direct observation of the behavior.

  • Descriptive assessment (ABC recording, scatterplot) documents behavior as it naturally occurs, suggests possible functions, but does not demonstrate a causal or functional relation.

  • Functional analysis is an experimental assessment that manipulates antecedents and consequences to identify the function of behavior; it is the only standard method that demonstrates function.

  • Standard functional analysis conditions: alone (automatic), attention (social positive), demand/escape (social negative), tangible, and play/control for comparison.

  • Behavioral definitions must be observable, measurable, objective, clear, and complete, including examples and non-examples of the target response.

  • Baseline data are collected before intervention begins so that later performance can be compared and treatment effects evaluated.

Quick reference

Skill Acquisition

  • Discrete trial teaching sequence: antecedent (SD) → learner response → consequence → brief intertrial interval, with massed trials in a structured setting.

  • Prompt types: verbal, gestural, model, visual, positional, and physical (full or partial); physical prompts are the most intrusive.

  • Prompt hierarchies: most-to-least prompting supports errorless learning of new skills; least-to-most prompting allows independent responding for skills already in the repertoire.

  • Prompt fading and time delay: insert a progressively longer delay between the SD and the prompt so stimulus control transfers from the prompt to the SD.

  • Chaining methods: forward chaining teaches step 1 first, backward chaining teaches the last step first, and total task chaining teaches the whole chain each session.

  • Schedule effects: fixed ratio produces a high rate with a post-reinforcement pause, variable ratio produces high steady rates resistant to extinction, fixed interval produces a scalloped pattern, variable interval produces a steady moderate rate.

  • Discrimination training: reinforce the response in the presence of the SD and withhold reinforcement in the presence of the S-delta; stimulus control is shown when the response occurs mainly to the SD.

  • Generalization tactics: train across settings, people, and stimuli, use natural reinforcers, program common stimuli, and teach loosely rather than under one narrow set of conditions.

Quick reference

Behavior Reduction

  • Four common functions: attention (social positive), escape or avoidance (social negative), access to tangibles (social positive), and automatic or sensory (nonsocial).

  • Function-based treatment matches the intervention to the identified function; a replacement behavior must produce the same reinforcer as the problem behavior.

  • Differential reinforcement variants: DRA reinforces an alternative behavior, DRI reinforces an incompatible behavior, DRO reinforces the absence of the problem behavior, DRL reinforces lower rates, DRH reinforces higher rates.

  • DRO intervals deliver reinforcement when the problem behavior does not occur during the whole interval; interval length is set from baseline data on the behavior.

  • Extinction variants: attention extinction withholds attention, escape extinction continues the demand, tangible extinction withholds the item; an extinction burst is expected at the start.

  • Antecedent interventions include noncontingent reinforcement, functional communication training, high-probability request sequences, priming, offering choices, and environmental modification.

  • Response cost removes a specified amount of reinforcement contingent on behavior, and time-out removes access to reinforcement; both are punishment-based and require plan authorization.

  • Reinforcement increases behavior and punishment decreases behavior; the label depends on the observed effect on the response, not on whether the consequence is pleasant or aversive.

Quick reference

Documentation and Reporting

  • SOAP note format: Subjective, Objective, Assessment, Plan; the objective section contains only directly observed, measurable facts.

  • Session notes include date, time, duration, target behaviors with data, interventions implemented, learner response, and the recorder's signature and credentials.

  • Data are recorded at the time the behavior occurs or as soon as possible afterward; reconstructed or estimated data are not acceptable.

  • Correct documentation errors with a single line through the error, the correction, initials, and date; never erase, scribble out, or use correction fluid.

  • Line graph: x-axis is time or sessions, y-axis is the behavior measure, and vertical phase change lines separate conditions.

  • Report to the supervisor immediately: injuries, suspected abuse or neglect, medication changes, illness, and sudden or significant changes in behavior.

  • Confidentiality: store data in secured locations, use client identifiers rather than full names where possible, and do not discuss clients in public spaces or on social media.

Quick reference

Professional Conduct and Ethics

  • RBTs practice under the supervision of a qualified BCBA, implement programs designed by the supervisor, and do not independently design or modify assessments or interventions.

  • Supervision standard: at least 5% of hours worked per month, at least two face-to-face supervision meetings per month, at least one of which is individual.

  • Mandated reporting: suspected abuse, neglect, or harm is reported to the supervisor and to the appropriate authorities as required by law.

  • Informed consent is obtained before assessment, intervention, or changes in services, from the client or legally authorized representative.

  • Avoid multiple or dual relationships with clients and families; do not accept gifts of more than trivial value or enter into business or social relationships.

  • RBTs may not falsify data, claim competencies they do not hold, or perform procedures outside their training and scope of practice.

  • Ethical decision steps: identify the issue, consult the Ethics Code and supervisor, consider all stakeholders, act, and document the resolution.

  • Confidentiality limits: information is shared only with the treatment team or when legally required, disclosing the minimum necessary information.

RBT key terms

Continuous measurement

Recording every instance of a target behavior during the observation, including when it starts and stops, so the data show the true count and timing instead of an estimate.

Related: Frequency, Duration
Frequency

The total number of times a target behavior occurs during a defined observation period, recorded as a tally and reported without reference to how long the behavior lasted.

Related: Rate, Continuous measurement
Rate

The number of responses divided by a unit of time, such as responses per minute, which lets a technician compare sessions or observation periods of different lengths.

Related: Frequency, Inter-response time (IRT)
Duration

The total time a behavior lasts, measured from its start to its finish with a stopwatch or timer; best for behaviors that continue for more than a moment.

Related: Latency, Continuous measurement
Latency

The time that passes between an instruction or other stimulus and the start of the learner's response, showing how quickly the learner begins after a cue.

Related: Duration, Inter-response time (IRT)
Inter-response time (IRT)

The time from the end of one response to the start of the next response, used when the spacing between behaviors matters more than the total number.

Related: Rate, Latency
Partial interval recording

A discontinuous recording method in which the observer marks an interval if the behavior happens at any point during it; it tends to overestimate how much behavior occurred.

Related: Whole interval recording, Momentary time sampling
Whole interval recording

A discontinuous recording method in which the observer marks an interval only when the behavior continues for the entire interval; it usually underestimates how often behavior occurs.

Related: Partial interval recording, Momentary time sampling
Momentary time sampling

A discontinuous recording method in which the observer notes whether the behavior is happening at the exact instant each interval ends, giving an estimate without continuous watching.

Related: Partial interval recording, Whole interval recording
Percent of occurrence

The number of correct or target responses divided by the total number of opportunities, multiplied by one hundred; common when a teaching program has a set number of trials.

Related: Frequency, Discrete trial teaching (DTT)
Permanent product

Measurement of behavior by examining the physical or digital result it leaves behind, such as a completed worksheet or a tidy room, so recording can happen after the fact.

Related: Continuous measurement, Task analysis
Interobserver agreement (IOA)

The extent to which two observers independently record the same behavior in the same way, calculated by comparing their records to show the measurement can be trusted.

Related: Continuous measurement, Baseline
Baseline

Data collected on a behavior before any intervention begins; it shows the current level of performance and is the comparison point for judging whether treatment worked.

Related: Interobserver agreement (IOA), Functional behavior assessment (FBA)
Preference assessment

A structured procedure for finding out which items or activities a learner is likely to work for, done by presenting options singly or in pairs and watching what the learner chooses.

Related: Reinforcement, Functional behavior assessment (FBA)
Functional behavior assessment (FBA)

A process of gathering information about the events that reliably come before and after a problem behavior in order to identify the function, or purpose, that behavior serves.

Related: ABC data, Functional analysis
ABC data

Anecdotal recording of what happened right before a behavior, what the behavior looked like, and what happened right after, used to spot patterns about why it keeps occurring.

Related: Functional behavior assessment (FBA), Antecedent intervention
Functional analysis

An experimental assessment that arranges and compares conditions such as attention, escape from demands, access to tangibles, and being alone to identify which consequence maintains a behavior.

Related: Functional behavior assessment (FBA), ABC data
Discrete trial teaching (DTT)

A structured teaching format in which the instructor gives a brief instruction, provides a prompt if needed, the learner responds, and a consequence follows; trials are repeated in a planned order.

Related: Prompt, Reinforcement
Natural environment teaching (NET)

Teaching within everyday routines and play, using materials and activities the learner is currently motivated for, so skills are practiced in realistic settings as they naturally come up.

Related: Generalization, Preference assessment
Task analysis

Breaking a complex skill into smaller, sequenced steps that can each be taught, prompted, and measured, and that together make up the whole behavior.

Related: Chaining, Permanent product
Chaining

Teaching a task analysis one step at a time, either beginning with the first step, beginning with the last step, or teaching all steps with assistance that is gradually removed.

Related: Task analysis, Prompt fading
Shaping

Reinforcing closer and closer versions of a target behavior, starting with something the learner can already do and gradually requiring more before the reinforcer is given.

Related: Reinforcement, Prompt
Prompt

An extra cue or bit of help, such as a gesture, a model, or physical guidance, added so the learner produces the correct response and that response can be reinforced.

Related: Prompt fading, Stimulus control
Prompt fading

Gradually removing prompts, or waiting longer and longer before giving one, so the learner responds to the natural instruction instead of relying on the added help.

Related: Prompt, Stimulus control
Stimulus control

The condition in which a behavior occurs reliably when a particular instruction or stimulus is present and does not occur without it, showing the learner discriminates what is expected.

Related: Prompt fading, Generalization
Generalization

The appearance of a learned skill in new settings, with different people, or with different materials than were used in teaching; it must be planned for and checked.

Related: Maintenance, Natural environment teaching (NET)
Maintenance

The continued performance of a learned skill after direct teaching ends, checked with occasional probe sessions to confirm the skill has held up over time.

Related: Generalization, Baseline
Reinforcement

A consequence delivered after a behavior that makes that behavior more likely to happen again; it can involve adding something preferred or removing something unpleasant.

Related: Preference assessment, Extinction
Extinction

Discontinuing the reinforcer that has been keeping a behavior going; the behavior usually gets worse for a while before it gradually decreases.

Related: Extinction burst, Reinforcement
Extinction burst

A temporary and predictable worsening of a behavior when extinction starts, such as more frequent, more intense, or different-looking responses; the plan should be followed consistently.

Related: Extinction, Objective session note
Differential reinforcement of alternative behavior (DRA)

Reinforcing an acceptable alternative behavior while withholding reinforcement for the problem behavior, so the learner can still get the same outcome in a better way.

Related: Functional communication training (FCT), Extinction
Functional communication training (FCT)

Teaching a learner an easy, appropriate way to ask for what the problem behavior used to obtain, such as requesting a break, and honoring that request every time.

Related: Differential reinforcement of alternative behavior (DRA), Functional behavior assessment (FBA)
Antecedent intervention

Changing conditions before the behavior happens, for example by offering choices, simplifying instructions, or scheduling breaks, to make the problem behavior less likely.

Related: ABC data, Functional behavior assessment (FBA)
Objective session note

A written summary of a session in plain, factual language that states the target behaviors observed, the data collected, the procedures used, and how the learner responded, without opinions or guesses.

Related: Incident report, Confidentiality
Incident report

A factual, promptly written account of an unusual event such as an injury, restraint, or property damage, describing what happened, who was involved, and what was done, following agency policy.

Related: Objective session note, Supervision
Informed consent

Voluntary permission from a client or legal representative to receive services, given after they are told the purpose, procedures, risks, benefits, and alternatives, and documented appropriately.

Related: Confidentiality, Scope of practice
Confidentiality

Protecting client information by sharing it only with authorized people for legitimate reasons and by storing records, data, and conversations securely.

Related: Informed consent, Objective session note
Dual relationship

Having a second role with a client or family, such as friend, employee, or business partner, beyond the professional one; this can cloud judgment and should be avoided or disclosed.

Related: Confidentiality, Supervision
Supervision

The required oversight of a technician's work by a qualified behavior analyst, including observation, regular meetings, feedback on performance, and guidance on cases.

Related: Scope of practice, Incident report
Scope of practice

The set of duties a behavior technician is trained and allowed to carry out; tasks beyond it, such as designing behavior programs, must be handed to the supervisor.

Related: Supervision, Informed consent

RBT study plan

8 weeks · About 6 hours per week

Week 1

Measurement

  • Define and distinguish continuous versus discontinuous measurement procedures (frequency, rate, duration, latency, inter-response time, partial- and whole-interval recording, momentary time sampling).

  • Calculate frequency, rate, duration, latency, and percentage of occurrence from raw session data without a calculator error.

  • Construct and label a line graph from a set of session data, including axis labels, phase change lines, and a data path.

  • Compute interobserver agreement using total count, interval-by-interval, and trial-by-trial methods given two observers' records.

Your checkpoint

Completed 25-item measurement calculation and graphing worksheet, scored at 85% or higher, with a written correction note for every missed item.

Week 2

Measurement & Assessment

  • Evaluate the accuracy and reliability of a measurement system by identifying threats such as observer drift, poorly defined behavior, and reactivity.

  • Write three operational definitions of target behaviors that pass a dead-man test and include examples and non-examples.

  • Describe the purpose and basic steps of preference assessments (free operant, paired stimulus, multiple stimulus without replacement) and select an appropriate one for a given client description.

  • Record ABC data for a provided narrative scenario and label antecedents, behaviors, and consequences.

Your checkpoint

A mock data collection packet containing three operational definitions, one ABC recording form, and one completed ABC narrative scored against a rubric.

Week 3

Assessment & Skill Acquisition

  • Compare descriptive assessment, functional analysis conditions (alone, attention, demand, tangible, play), and indirect assessment, and match each to an appropriate referral question.

  • Identify skill strengths and deficits using a provided assessment summary and state two programming implications.

  • Differentiate discrete trial teaching from natural environment teaching and describe when each is indicated.

  • Write task analyses for three everyday skills using forward, backward, and total-task chaining formats.

  • Sequence a prompting hierarchy and describe prompt fading and errorless learning procedures.

Your checkpoint

Three complete written task analyses plus a one-page prompting hierarchy and fading plan, reviewed against a 10-point accuracy checklist.

Week 4

Skill Acquisition

  • Describe stimulus control, discrimination training, and the process of transferring stimulus control from a prompt to a natural cue.

  • Explain shaping, differential reinforcement of successive approximations, and reinforcer selection during skill acquisition.

  • Plan generalization and maintenance strategies, including multiple exemplars, naturally occurring reinforcers, and intermittent schedules.

  • Design a token economy that specifies target behaviors, token delivery, exchange rate, and backup reinforcers.

Your checkpoint

A written skill-acquisition program for one target skill that includes teaching procedure, prompting and fading plan, reinforcement schedule, generalization plan, and a mastery criterion.

Week 5

Behavior Reduction

  • State the four common functions of behavior and match a behavioral description to the most likely function.

  • Differentiate positive and negative reinforcement and identify which is operating in a given scenario.

  • Compare differential reinforcement procedures (DRA, DRO, DRI, DRL) and select the appropriate one for a stated case.

  • Describe extinction, extinction bursts, and spontaneous recovery, and identify procedural variations of extinction by function.

  • List antecedent-based interventions and explain how they reduce the likelihood of problem behavior.

Your checkpoint

A written functional hypothesis and behavior intervention outline for one scenario, including function statement, antecedent strategies, replacement behavior, and reinforcement-based consequence strategy.

Week 6

Behavior Reduction & Documentation and Reporting

  • Explain the intended effects, risks, and ethical constraints of punishment procedures, including the requirement for less restrictive alternatives first.

  • Describe crisis and safety procedures, including when restraint may be used and what must be documented afterward.

  • Write objective session notes that separate observable description from opinion or interpretation.

  • Convert raw session data into a graph and a brief summary statement suitable for a progress report.

  • Identify documentation requirements including timeliness, accuracy, confidentiality, and storage of protected health information.

Your checkpoint

A complete session documentation packet: one objective session note, one updated graph, and one short progress summary, checked against a documentation accuracy rubric.

Week 7

Documentation and Reporting & Professional Conduct and Ethics

  • Identify reporting obligations, including mandated reporting, incident reporting, and the boundaries of client confidentiality.

  • Apply core ethical principles such as client dignity, informed consent, and least restrictive procedures to written vignettes.

  • Distinguish scope of competence from scope of practice and identify when to seek supervision or refer out.

  • Describe appropriate boundaries with clients and families, including dual relationships and social media contact.

  • Explain the role of supervision, feedback seeking, and self-monitoring in maintaining professional competence.

Your checkpoint

Written responses to 10 ethics and documentation vignettes, each citing the relevant principle and a justified course of action, scored at 80% or higher.

Week 8

Measurement & Assessment & Skill Acquisition & Behavior Reduction & Documentation and Reporting & Professional Conduct and Ethics

  • Complete two full-length timed practice exams under test-day conditions.

  • Analyze every missed item and tag the error by domain, content gap, or misread question.

  • Re-study the two lowest-scoring domains using the error log rather than re-reading all material.

  • Rehearse the calculation and graphing items from Week 1 to confirm retention.

Your checkpoint

Two completed practice exams at 80% or higher, accompanied by a categorized error log and a one-page remediation summary listing remaining weak areas.

Milestones

Week 2: Score 85% or higher on the measurement worksheet and produce three operational definitions that a second reader can apply without asking clarifying questions.

Week 4: Score 80% or higher on a 30-item self-made quiz covering domains A, B, and C, and submit the written skill-acquisition program for review.

Week 6: Produce a behavior intervention outline and a session documentation packet that both pass a rubric review with no more than one correction needed.

Week 8: Achieve 80% or higher on two full-length practice exams and show that every missed item on the second exam maps to a logged category and a completed remediation action.

RBT exam day

Your checklist

Unexpired government-issued photo ID with your signature

A driver's license, passport, or state-issued ID card. The name must match the name on your exam authorization exactly. Check the expiry date and the spelling now, not at the test center door.

A second form of identification

Some test centers ask for two IDs. Bring a second document (for example a signed credit card or a student ID) as a backup, and confirm the exact ID requirement with Pearson VUE/BACB before exam day.

Appointment confirmation and exam authorization

Have the appointment number and the test center address saved or printed. Your phone will go into a locker, so write the confirmation number on paper if you want it in hand during check-in.

Verify you are inside your exam authorization window

Authorizations are time-limited, so confirm the deadline in your BACB/Pearson VUE account well before the appointment. If the date is close, contact the provider immediately.

A plan to arrive about 30 minutes early

Pearson VUE test centers generally ask candidates to arrive at least 30 minutes before the appointment for check-in. Build in buffer for traffic, parking, and a security screening.

Route, parking, and building details

Know which entrance, floor, and suite the testing center is in. Office-building test centers are easy to miss; scouting the location the day before removes a common source of lateness.

Leave prohibited items at home or in the car

Phones, smartwatches, fitness trackers, notes, textbooks, bags, and study materials are not allowed in the testing room. Centers provide a locker, but fewer items means faster check-in.

Any assistive or medical items you need

Glasses, hearing aids, inhalers, or required medication. Ask the provider in advance about accommodations or approval for items that would otherwise be restricted in the testing room.

Ask the proctor about a note board

Many Pearson VUE centers supply an erasable note board and marker on request instead of scratch paper. Confirm what is available at your center rather than bringing your own paper.

Water and a snack for after the exam

You cannot take food or drink into the testing room. Leave something in the car or locker for after the 90-minute session.

A light, calm pre-exam routine

Eat a normal meal, sleep a full night, and avoid last-minute cramming in the parking lot. The exam is 85 multiple-choice questions in 90 minutes, so alertness matters more than one more flashcard.

Plan the day

72 hours before

Confirm the appointment time, test center address, and ID requirements in your Pearson VUE account. Check that your name matches your BACB record. If anything is wrong, contact the provider now while there is time to fix it.

72 hours before

Do a structured review rather than a topic binge. Walk the RBT Task List domains (measurement, assessment, skill acquisition, behavior reduction, documentation and reporting, professional conduct), note the two or three areas where you are weakest, and review only those.

72 hours before

Stop heavy new study by the evening before the last full day. Sleep debt is the single most fixable thing that hurts performance on a timed multiple-choice exam.

24 hours before

Do a dry run of the route or confirm transit times. Lay out your ID, second ID, and confirmation in one place. Pack nothing you cannot carry in a pocket.

24 hours before

Light review only: skim definitions and key terms for an hour at most, then stop. No new material, no practice tests that could rattle your confidence the night before.

Morning of

Eat a normal breakfast, hydrate, and leave earlier than the map says. Aim to walk into the building 30 minutes before your appointment. Do not study in the waiting area; it raises anxiety and gains little.

At check-in

Give the proctor your ID and confirmation, store everything else in the locker, and ask about the note board. Read any rules sheet you are given and ask the proctor to clarify anything unclear before the clock starts.

During the test

Budget roughly one minute per question. Answer every question on the first pass, since there is no penalty for guessing, and mark uncertain ones if the platform allows flagging for review.

Final 15 minutes

Return to flagged items, re-read the stem for key words like 'first,' 'best,' 'least likely,' and 'should,' and make sure no question is left blank. Submit with time to spare rather than in the last 30 seconds.

After the exam

You will typically receive preliminary pass/fail information at the center; confirm how and when official results are reported with BACB/Pearson VUE. Do not post question content online under any circumstances.

Rules to check

  • Bring valid, unexpired identification and make sure the name matches your exam authorization exactly. If there is a mismatch or a name change, resolve it with the provider before exam day - test centers cannot admit you with conflicting documents.

  • Nothing except approved items goes into the testing room: no phone, smartwatch, notes, books, or study materials. Store personal items in the provided locker and expect to be asked to empty your pockets.

  • The exam content is confidential and copyrighted. Do not photograph, record, transcribe, or discuss specific questions with anyone - doing so is a conduct violation as well as a testing-integrity issue.

  • If you leave the testing room for any reason, the exam clock generally keeps running and re-entry may be limited. Confirm the break and re-entry policy with the test center before you start.

  • There is no penalty for wrong answers, so never submit with unanswered questions. If you are running short on time, fill in remaining items quickly rather than leaving them blank.

  • Report any technical problem - a frozen screen, a lost timer, a broken marker - to the proctor immediately rather than trying to work around it. Problems reported after the exam are much harder to resolve.

  • Results are reported as pass or fail against a criterion-referenced standard, not as a percentage score. Do not expect or interpret a numeric score.

  • Retake eligibility, waiting periods, and any limits on attempts are set by the BACB. Confirm those terms directly with the BACB before assuming a timeline for a second attempt.

  • Follow all proctor instructions, including seating, room conduct, and signing out. Arguing with or ignoring test center staff can end your session regardless of your answers.

RBT FAQ

How many RBT practice questions are available?

The practice set has 200 RBT questions. Each one includes the choices, the correct answer, and an explanation, and the set is free to read with no signup.

How many RBT flashcards are available?

The flashcard set has 32 RBT cards. Each card shows the term and its definition.

Which topics does the RBT study material cover?

The RBT study material has 6 sections, including Measurement, Assessment, and Skill Acquisition.

What format facts does the catalog list for the RBT exam?

The catalog lists these item types: multiple choice for the RBT exam.