OR Nail Technician Practice Test

Oregon Nail Technology Licensing Exam

OR Nail Technician overview

  • 200 practice questions
  • 32 flashcards
  • 4 study guide topics
  • 40 key terms

What you'll study

  • Infection Control, Sanitation and Safety25%
  • Nail Care Services and Procedures25%
  • Anatomy, Physiology and Nail Disorders25%
  • Oregon Laws, Rules and Salon Business Practices25%

The Oregon Nail Technology credential is issued through the Oregon Health Authority's Health Licensing Office (HLO), the state agency that regulates nail technology practitioners, salons and related businesses in Oregon. To be licensed, candidates must meet the HLO's training and application requirements and pass the nail technology written examination. The exam is designed for people who have completed an approved nail technology program - or otherwise satisfied Oregon's training requirements - and who intend to work in a salon, spa, or booth-rental setting, or eventually to own a licensed nail salon.

Testing content is organized around four practical areas: infection control, sanitation and safety; nail care services and procedures; anatomy, physiology and nail disorders; and Oregon laws, rules and salon business practices. That mix means memorizing manicure and pedicure steps is not enough - you are also expected to understand how disease transmission is prevented, how to recognize conditions that must be referred to a physician, and which Oregon Administrative Rules govern salon operation and practitioner conduct.

Preparation works best when it is active and sequenced. Build a foundation in infection control and anatomy first, since those concepts appear inside procedure questions. Then drill procedure sequences and safety checks, and finish with Oregon rules and business topics. Track weak areas and revisit them rather than re-reading notes.

This page is independent study material and is not affiliated with, endorsed by, or published by the Oregon Health Authority or the Health Licensing Office. Verify all current requirements directly with the HLO before scheduling.

Common mistakes

Spraying or wiping reusable metal implements with disinfectant, or giving them a quick dip, instead of fully immersing them for the contact time printed on the product label after cleaning.

Candidates memorize the words 'clean and disinfect' but treat the disinfectant step as a quick wipe-down; they also conflate the cleaning step (removing debris) with the disinfection step (killing pathogens) and assume one product does both in one motion.

What to do instead

Drill the two-step sequence out loud for every implement type: wash with soap and water, dry, then completely submerge in an EPA-registered hospital-grade disinfectant for the full label contact time, then remove with clean hands and store covered. Practice reading a sample label and stating the contact time and dilution before answering.

Calling a UV light cabinet, a jar of blue liquid, or a sealed bag 'sterilization' and choosing it as the correct answer when the question asks how to make an implement safe after blood contact.

Everyday salon language uses 'sterilize' loosely, so the word feels familiar and correct; candidates also assume stronger-sounding methods are always the required answer regardless of what the question actually asks.

What to do instead

Learn the ladder explicitly: cleaning removes visible debris, disinfection kills most pathogens on surfaces and implements, sterilization destroys all microbial life and requires an autoclave or licensed service. Match the answer to the exact verb in the question stem, and treat 'UV cabinet' and 'storage jar' as storage, not processing.

Reusing porous items such as files, buffers, wooden sticks, and orange-wood pushers from one client to the next, or attempting to disinfect them by spraying or soaking.

These items look clean after brushing off dust, and candidates want to avoid seeming wasteful or losing money on supplies, so they mentally reclassify them as reusable.

What to do instead

Memorize the rule by material, not by appearance: anything porous or unsealed that cannot be fully immersed and disinfected is single-use and must be discarded or given to the client. For every scenario question, first ask 'is this item porous?' and let that answer decide reuse versus discard.

Skipping hand washing or hand sanitizing between clients and between glove changes, or handling drawers, phone, towels, and product containers with gloved hands that have touched a client.

Gloves create a false sense of protection, so candidates treat gloving as a substitute for hand hygiene and do not think of the salon environment as a contaminated surface chain.

What to do instead

Build a fixed sequence: wash hands, dry, glove, serve client, remove gloves, wash hands again before touching anything shared. When reviewing a scenario, highlight every object the technician touches and check whether hands were washed at each transition, not just at the start.

Reducing natural nail plate thickness with an electric file or heavy hand filing during prep, or filing into the sidewalls and seal to 'make product stick'.

Candidates confuse 'removing shine' with 'removing surface,' and in scenario questions they pick the answer that sounds most thorough rather than the one that preserves plate integrity.

What to do instead

Anchor prep to the goal: remove shine and surface oils only, keep the plate intact, and reserve reduction for product removal at the fill line. Practice distinguishing 'light etch' from 'thinning' wording and reject any answer describing pressure, heat, or visible plate reduction on a natural nail.

Applying product over cuticle, sidewall, or skin, or skipping dehydration and proper cuticle care before an enhancement service, then blaming the product line when lifting occurs.

The exam repeatedly tests service steps in order, and candidates who learned the steps as a list rather than as a cause-and-effect sequence drop the dehydration and cuticle detail as 'minor.'

What to do instead

Study each service as a chain: sanitize hands and client, examine nails, shape, push back and remove non-living tissue, dehydrate, apply with a small margin off the skin, cure or set, finish. For lifting questions, walk the chain from the beginning and pick the answer that identifies the earliest broken link.

Labeling every discolored, thickened, or separated nail as a fungal infection, or conversely treating a clearly contraindicated condition as a routine service to be 'covered up' with product.

Discoloration is the most visually memorable sign, so it dominates recall, and candidates have not built a differential list of the non-fungal look-alikes that appear on exams.

What to do instead

Build a comparison table of common nail disorders by their distinguishing features (color, shape, location, whether the plate is attached or lifted, whether tissue is inflamed) and memorize the technician's action for each: serve, serve with care, or refer to a physician. For every disorder question, answer the action question last, after naming the distinguishing feature.

Mixing up anatomical terms and locations, for example treating cuticle and eponychium as synonyms, calling the lunula the growth area, or placing the matrix at the free edge.

The words are learned as a vocabulary list with pictures, and under exam pressure the labels shuffle; the true functional detail (where new cells are produced) gets replaced by the most visible landmark.

What to do instead

Tie each term to a function and a location in one sentence you can say without the diagram: matrix produces new plate cells, lunula is the visible part of the matrix, cuticle is the dead tissue on the plate, eponychium is the living tissue at the proximal fold, hyponychium is the seal under the free edge. Redraw a blank nail diagram from memory daily until labels and functions stay paired.

Answering pedicure sanitation questions with general cleaning habits, such as rinsing the basin, running the filter, or changing the liner, without draining and disinfecting the basin with an EPA-registered product at the label's contact time after each client.

Basin upkeep is taught as a routine rather than as a regulated procedure, so candidates substitute the step they perform most often for the step the rule actually requires.

What to do instead

Learn the pedicure equipment cycle as a fixed script: drain, clean all surfaces and jets, rinse, fill with the properly diluted disinfectant, circulate for the full label contact time, drain and dry. Pair the script with the recordkeeping requirement so answers that skip a step or skip the log are eliminated on sight.

Assuming licensing and scope questions are 'common sense,' for example believing one license covers all services, that a booth renter needs no written agreement or salon license, or that services such as blade callus removal are within a nail technician's scope.

Business and rule content feels less technical than chemistry or anatomy, so it gets the least study time; candidates then answer from how their own salon happens to operate rather than from the Board's rules.

What to do instead

Study the rules as a checklist of who, what, where, and how long: who must hold a license, what each license authorizes, where licenses and sanitation rules must be posted or available, and how long records are kept. When a scope question appears, decide whether the service involves cutting living tissue or a medical claim; if it does, it is outside the nail technician's scope and requires referral.

Exam requirements can change. Confirm current details with the exam provider.

OR Nail Technician practice

200 questions. Each one lists the choices, the correct answer, and an explanation. With JavaScript, this list opens one question at a time. The checker at the top of this page saves progress in this browser when it is available.

  1. Question 1Infection Control, Sanitation and Safety

    What should a nail technician do before beginning a manicure on a new client?

    1. Apply lotion to the client's hands to soften the cuticles
    2. Put on gloves over hands that are still soiled
    3. Wash hands with soap and water and dry with a clean towel Correct answer.
    4. Wipe the work surface once with a dry cloth

    Explanation

    Hand hygiene is the first step before any service; hands are washed with soap and water or treated with an alcohol-based hand rub and dried with a clean disposable towel. Gloves are not a substitute for washing, and a dry cloth does not clean or disinfect a surface.

  2. Question 2Infection Control, Sanitation and Safety

    Disinfection is best described as a process that

    1. Kills most pathogenic microorganisms on nonporous surfaces Correct answer.
    2. Destroys all microbial life, including bacterial spores
    3. Removes visible debris but does not affect microorganisms
    4. Sterilizes porous items so they can be reused

    Explanation

    Disinfection reduces or kills most pathogenic microorganisms on inanimate nonporous surfaces but does not destroy bacterial spores; that is sterilization. Cleaning removes visible debris, and porous items cannot be reliably disinfected for reuse.

  3. Question 3Infection Control, Sanitation and Safety

    Which item is intended for single use and must be discarded after one client?

    1. Foam-core nail file Correct answer.
    2. Autoclave tray
    3. Glass mixing dish
    4. Metal cuticle pusher

    Explanation

    Foam-core files are porous, absorb fluids, and cannot be reliably cleaned and disinfected, so they are discarded after one client. Metal pushers, glass dishes, and autoclave trays are nonporous and can be cleaned and then disinfected or sterilized.

  4. Question 4Infection Control, Sanitation and Safety

    During a service, when should a nail technician change gloves?

    1. At the end of the day only
    2. Only after they become visibly soiled with product
    3. When moving from a soiled task to a clean task Correct answer.
    4. After every 30 minutes of continuous work on one client

    Explanation

    Gloves must be changed when they are torn or visibly soiled and whenever the technician moves from a contaminated task to a clean one to prevent cross-contamination. Gloves are never washed and reused, and a time schedule alone does not replace task-based changes.

  5. Question 5Infection Control, Sanitation and Safety

    What is the main purpose of a Safety Data Sheet (SDS)?

    1. To explain hazards, safe handling, and first aid Correct answer.
    2. To certify that a product is approved by the FDA
    3. To replace the product label during storage
    4. To list the retail price and shelf life of a product

    Explanation

    An SDS summarizes a product's hazards, safe handling, and first-aid measures and must be available to workers for hazardous chemicals. It does not certify approval, set prices, or take the place of the container label.

  6. Question 6Infection Control, Sanitation and Safety

    How should acrylic monomer and other salon chemicals be stored?

    1. In an unmarked beverage bottle in a refrigerator
    2. In an open tray near the client's hands
    3. In a closed, labeled container away from heat Correct answer.
    4. In direct sunlight beside the workstation

    Explanation

    Chemicals should be kept in closed, properly labeled containers away from heat, sparks, and flames because many nail products are flammable and volatile. Unmarked beverage containers invite accidental ingestion, sunlight can degrade products, and open trays increase inhalation exposure.

  7. Question 7Infection Control, Sanitation and Safety

    If a client's skin is nicked and blood appears during a service, what should the technician do?

    1. Rinse the implement in water and keep using it
    2. Stop, put on fresh gloves, and clean the area Correct answer.
    3. Continue the service and wipe the blood with a towel
    4. Blow on the area until the blood dries

    Explanation

    Blood exposure requires stopping the service, putting on fresh gloves, cleaning the wound, and disposing of contaminated materials properly. Implements and surfaces that contacted blood must be cleaned and disinfected, and the incident should be documented according to the exposure control plan.

  8. Question 8Infection Control, Sanitation and Safety

    How should disposable sharp items, such as used razor blades, be discarded?

    1. Wrapped loosely in a paper towel and placed in the regular trash
    2. Placed loose in a drawer until the end of the day
    3. Recycled with glass bottles and cans
    4. Placed in a rigid, puncture-resistant sharps container Correct answer.

    Explanation

    Disposable sharps must go into a rigid, puncture-resistant, closable sharps container to prevent needlesticks and cuts. Paper towels, loose drawers, and recycling bins do not protect workers from injury.

  9. Question 9Infection Control, Sanitation and Safety

    A disinfectant label reads 'EPA-registered hospital disinfectant, 10-minute contact time.' What does this require?

    1. Reuse the same solution for 10 clients
    2. Leave the product on for 10 seconds only
    3. Keep the surface wet with product for 10 minutes Correct answer.
    4. Wipe the product off immediately after spraying

    Explanation

    Contact time is the period the surface must remain visibly wet with the disinfectant for the label's claims to be valid. Wiping immediately or shortening the time can leave pathogens alive; disinfectants are not sterilants, and solutions are not reused beyond label directions.

  10. Question 10Infection Control, Sanitation and Safety

    Which item is porous and therefore cannot be reliably disinfected for reuse?

    1. Terry cloth towel Correct answer.
    2. Glass mixing dish
    3. Glazed ceramic pedicure bowl
    4. Stainless steel nippers

    Explanation

    Porous materials absorb liquids and trap microorganisms, so they cannot be reliably disinfected and should be single-use or laundered. Nonporous items such as metal, glass, and glazed ceramic can be cleaned and disinfected.

  11. Question 11Infection Control, Sanitation and Safety

    After each client, how should a whirlpool foot spa be processed?

    1. Fill it with hot water and run the jets for one minute only
    2. Drain, clean, and disinfect for the labeled contact time Correct answer.
    3. Rinse with water only and leave it to air dry
    4. Wipe with a dry paper towel

    Explanation

    Foot spas must be drained, cleaned of debris, and disinfected with an EPA-registered product for the full labeled contact time after each client. Rinsing or wiping alone leaves biofilm and pathogens in the jets and tubing.

  12. Question 12Infection Control, Sanitation and Safety

    Which process achieves sterilization of metal implements?

    1. Soaking in quaternary ammonium disinfectant for 10 minutes
    2. Wiping with 70% alcohol
    3. Submerging in bleach solution for 5 minutes
    4. Cleaning, then processing in an autoclave Correct answer.

    Explanation

    Sterilization destroys all microbial life, including spores, and is achieved with an autoclave, dry heat, or chemical sterilant after cleaning. Disinfectants such as quats, alcohol, and bleach at disinfection strength do not sterilize.

  13. Question 13Infection Control, Sanitation and Safety

    What is the likely result if a quaternary ammonium disinfectant is mixed with too much water?

    1. It will become safe to drink
    2. It will no longer require any contact time
    3. It may fail to kill pathogens within the contact time Correct answer.
    4. It will sterilize implements instead of disinfecting

    Explanation

    Disinfectants must be diluted exactly as labeled; too much water lowers the active ingredient concentration so it may not kill pathogens within the contact time. Overdilution does not create a sterilant or eliminate the need for contact time.

  14. Question 14Infection Control, Sanitation and Safety

    Which infection is spread mainly through blood and can be prevented by vaccination?

    1. Hepatitis B Correct answer.
    2. Pediculosis
    3. Mycobacterium fortuitum
    4. Tinea pedis

    Explanation

    Hepatitis B is a bloodborne virus, and vaccination is the primary prevention for at-risk workers. Tinea pedis and pediculosis are not bloodborne, and Mycobacterium fortuitum is associated with contaminated water.

  15. Question 15Infection Control, Sanitation and Safety

    How should reusable nail drill bits be processed between clients?

    1. Soak in plain water overnight only
    2. Clean debris, then disinfect or sterilize as directed Correct answer.
    3. Brush off visible debris and place them in a drawer
    4. Spray them with air freshener and reuse them on the next client

    Explanation

    Reusable drill bits must be cleaned of debris and then disinfected or sterilized according to the manufacturer's instructions because debris shields microorganisms. Water alone and air freshener do not disinfect, and dirty storage recontaminates the bit.

  16. Question 16Infection Control, Sanitation and Safety

    Which is a reasonable safety practice when using a UV/LED nail lamp?

    1. Have clients press bare skin against the bulb
    2. Follow manufacturer instructions and protect sensitive skin Correct answer.
    3. Use a lamp with a cracked or frayed cord
    4. Clean the lamp with acetone while it remains plugged into the outlet

    Explanation

    Lamp use should follow manufacturer instructions, including cleaning and electrical safety, and clients with sensitive skin may be offered protection. Cracked cords, acetone near energized equipment, and direct skin contact with bulbs are hazards.

  17. Question 17Infection Control, Sanitation and Safety

    Why is local exhaust ventilation important at a nail workstation?

    1. It removes vapors and dust from the breathing zone Correct answer.
    2. It sterilizes metal implements between client services
    3. It cools the UV lamp for faster curing
    4. It replaces the need for gloves

    Explanation

    Local exhaust ventilation captures vapors and dust at the source before they reach the technician's breathing zone. It does not sterilize tools, cool lamps, or replace gloves.

  18. Question 18Infection Control, Sanitation and Safety

    A client arrives with red, swollen, oozing skin around a toenail. What should the technician do?

    1. Proceed with the service but use extra disinfectant
    2. Trim the swollen tissue with sterile nippers
    3. Apply acrylic over the area to seal it from air
    4. Postpone the service and refer to a physician Correct answer.

    Explanation

    Red, swollen, oozing skin suggests infection or inflammation, which is a contraindication for nail services. The technician should not treat it, cover it with product, or cut tissue and should refer the client to a physician.

  19. Question 19Infection Control, Sanitation and Safety

    How should soiled salon towels and linens be handled?

    1. Held in a closed container, then laundered properly Correct answer.
    2. Rinsed in the pedicure tub and hung to dry
    3. Stored in the same bin as clean towels
    4. Shaken out in the service area and reused for the next client

    Explanation

    Soiled linens should be kept separate from clean linens and laundered with detergent and hot water or bleach according to instructions to reduce contamination. Shaking them spreads microorganisms, and rinsing in a pedicure tub contaminates the equipment.

  20. Question 20Infection Control, Sanitation and Safety

    A technician develops itchy, cracked skin and a rash after working with acrylic liquid. This is most likely

    1. A bacterial skin infection caught from a client
    2. A sign of hepatitis B infection
    3. A fungal infection from a towel
    4. Allergic dermatitis from the monomer Correct answer.

    Explanation

    Acrylic monomers can cause allergic contact dermatitis, often presenting as itching, redness, and cracked skin; the technician should stop exposure and seek medical advice. It is not a bacterial or fungal infection and is not a sign of hepatitis B.

  21. Question 21Infection Control, Sanitation and Safety

    Why should a technician test a reusable disinfectant with strips or a test kit?

    1. To check whether the solution has sterilized tools
    2. To measure the hardness of the tap water
    3. To determine the pH of the client's skin
    4. To confirm the active ingredient is still effective Correct answer.

    Explanation

    Reusable disinfectants can lose strength from dilution, evaporation, or repeated use, so test strips or kits verify the active ingredient concentration. They do not measure water hardness, confirm sterilization, or test skin pH.

  22. Question 22Infection Control, Sanitation and Safety

    Why is biofilm difficult to remove from a pedicure whirlpool?

    1. It is destroyed as soon as the tub is drained
    2. It forms only on the metal parts inside the tub
    3. Microbes sit in a slime layer that shields them Correct answer.
    4. It is a mineral deposit that soap removes easily

    Explanation

    Biofilm is a slimy layer of microorganisms that adheres to surfaces and protects them from disinfectants, so tubs must be scrubbed and treated for the full contact time. Draining alone does not remove it, and it is not a mineral deposit.

  23. Question 23Infection Control, Sanitation and Safety

    Mycobacterium fortuitum infections in nail salon clients have been linked mainly to

    1. Contaminated foot spa water and poor cleaning Correct answer.
    2. Using a metal nail file on natural nails
    3. Sharing nail polish bottles between clients
    4. Inhaling acrylic monomer vapors

    Explanation

    Mycobacterium fortuitum is an environmental organism linked to whirlpool foot spas when water and tubing are not adequately cleaned and disinfected. It is not transmitted by polish bottles, vapors, or files.

  24. Question 24Infection Control, Sanitation and Safety

    What is the purpose of an exposure control plan in a salon?

    1. To document client appointments, payments, and service history
    2. To outline steps that reduce exposure to bloodborne pathogens Correct answer.
    3. To list the prices of all salon services
    4. To describe how to clean the reception area each morning

    Explanation

    An exposure control plan is a written program required to reduce occupational exposure to bloodborne pathogens and to manage exposure incidents. It does not cover pricing, appointments, or routine reception cleaning.

  25. Question 25Infection Control, Sanitation and Safety

    Why should a technician avoid mixing bleach with other cleaning products?

    1. Toxic gases may form and effectiveness may drop Correct answer.
    2. Mixing makes bleach safer for the skin
    3. Mixing removes the need for contact time
    4. Mixing turns the bleach into a chemical sterilant

    Explanation

    Bleach can react with ammonia or acids in other products to release toxic gases, and mixing can also change the concentration so disinfection fails. It does not create a sterilant, remove contact time, or make bleach safe for skin.

  26. Question 26Infection Control, Sanitation and Safety

    Before a metal implement is placed in disinfectant, why must it first be cleaned?

    1. To give the metal a protective coating
    2. To make the disinfectant work faster
    3. To remove debris that shields microbes Correct answer.
    4. To prevent the implement from rusting

    Explanation

    Cleaning removes blood, oil, and other organic debris from the surface. Disinfectants cannot penetrate organic matter well, so microbes underneath can survive. Cleaning must always come before disinfection.

  27. Question 27Infection Control, Sanitation and Safety

    How long should a nail technician lather the hands during routine hand washing?

    1. 5 seconds
    2. 10 minutes
    3. 20 seconds Correct answer.
    4. 2 minutes

    Explanation

    Routine hand washing should involve soap, friction, and water for about 20 seconds, covering the palms, backs, fingers, and under the nails. Shorter washing may not remove transient microorganisms effectively. Longer scrubbing is not required for routine salon hand hygiene.

  28. Question 28Infection Control, Sanitation and Safety

    A technician will perform a manicure on a client with intact skin. Which personal protective equipment is standard?

    1. A lead apron
    2. Clean gloves Correct answer.
    3. Steel-toed shoes
    4. A face shield

    Explanation

    Clean disposable gloves are standard for services that involve contact with skin, nails, and potential body fluids. They protect both the client and the technician. Other listed items are not routine PPE for a manicure.

  29. Question 29Infection Control, Sanitation and Safety

    What is the main purpose of a Safety Data Sheet for a salon product?

    1. To certify that the product is sterile
    2. To list the retail price of the product
    3. To describe hazards and safe handling Correct answer.
    4. To record the client's appointment times

    Explanation

    A Safety Data Sheet provides information about a product's hazards, safe handling, storage, and first-aid measures. It helps technicians use chemicals safely and respond to spills or exposures. It is not a pricing, sterility, or appointment document.

  30. Question 30Infection Control, Sanitation and Safety

    Which item is intended for single use and should be discarded after one client?

    1. A glass mixing dish
    2. A stainless steel pusher
    3. A wooden emery board Correct answer.
    4. Metal cuticle nippers

    Explanation

    Porous items such as wooden emery boards cannot be reliably cleaned and disinfected for reuse. They should be discarded after a single client. Metal and glass items can be processed for reuse when handled correctly.

  31. Question 31Infection Control, Sanitation and Safety

    What does an EPA registration number on a salon disinfectant indicate?

    1. Its labeled claims were reviewed Correct answer.
    2. It needs no dilution
    3. The product is sterile
    4. It is safe for all skin types

    Explanation

    EPA registration means the product's labeled claims and use directions have been reviewed for the stated uses. It does not mean the product is sterile, harmless to all skin, or ready to use without dilution. Technicians must still follow the label.

  32. Question 32Infection Control, Sanitation and Safety

    Why should food and drinks be kept out of the nail service area?

    1. They make the salon look untidy
    2. They attract more clients
    3. They can pick up dust and mist Correct answer.
    4. They slow down the appointment

    Explanation

    Food and drinks can become contaminated with nail dust, chemical mist, and microorganisms in the service area. Keeping them out protects both clients and staff from accidental ingestion. Appearance and speed are not the health reason.

  33. Question 33Infection Control, Sanitation and Safety

    When should a nail technician wash their hands in relation to disposable gloves?

    1. Only if the gloves look dirty
    2. Only after removing the gloves
    3. Both before and after glove use Correct answer.
    4. Only before putting on the gloves

    Explanation

    Hands should be washed before donning gloves and again after removing them. Washing before protects the client, and washing after protects the technician from contamination that may occur during removal. Gloves are not a substitute for hand hygiene.

  34. Question 34Infection Control, Sanitation and Safety

    How does disinfecting differ from sanitizing?

    1. Sanitizing is only for metal tools
    2. The two processes are identical
    3. Sanitizing kills more pathogens
    4. Disinfecting kills more pathogens Correct answer.

    Explanation

    Sanitizing reduces the number of microorganisms, while disinfecting destroys or inactivates most disease-causing organisms on surfaces. Disinfecting is therefore a higher level of microbial control than sanitizing. The terms are not interchangeable.

  35. Question 35Infection Control, Sanitation and Safety

    After each client, how should the manicure table surface be treated?

    1. Sprayed with water only
    2. Covered with a fresh towel
    3. Cleaned then disinfected Correct answer.
    4. Wiped with a dry cloth

    Explanation

    Surfaces must first be cleaned to remove soil, then treated with an EPA-registered disinfectant according to its label. The surface should be allowed to remain wet for the labeled contact time. A dry wipe or water alone does not disinfect.

  36. Question 36Infection Control, Sanitation and Safety

    A technician's glove tears midway through a service. What is the best action?

    1. Continue and change gloves at the end
    2. Wipe the glove and continue
    3. Tape the tear and keep working
    4. Stop, wash, and don new gloves Correct answer.

    Explanation

    A torn glove no longer provides a barrier, so the technician should stop, remove the glove, wash hands, and put on a new glove before continuing. Taping or wiping a torn glove does not restore protection. This prevents contact with blood or body fluids.

  37. Question 37Infection Control, Sanitation and Safety

    A metal pusher is contaminated with a client's blood. How should it be processed before reuse?

    1. Cleaned then tuberculocidal-disinfected Correct answer.
    2. Wiped with alcohol and used on the next client
    3. Rinsed in water and returned to the drawer
    4. Soaked in soapy water and dried

    Explanation

    Blood-contaminated reusable implements must be cleaned and then disinfected with an EPA-registered hospital disinfectant carrying a tuberculocidal claim, or sterilized. This level of disinfection is required for bloodborne pathogen exposure. Rinsing or alcohol wiping alone is not adequate.

  38. Question 38Infection Control, Sanitation and Safety

    A disposable towel is saturated with blood. How should it be discarded?

    1. In a labeled biohazard bag Correct answer.
    2. Flushed down the sink
    3. In the open trash can
    4. In the clean towel cabinet

    Explanation

    Items soaked with blood should be placed in a sealed, labeled biohazard bag and disposed of according to local regulations. This prevents exposure to others who handle the waste. Open trash, sinks, and clean storage areas are not appropriate.

  39. Question 39Infection Control, Sanitation and Safety

    Why should electrical equipment be kept away from pedicure bowls filled with water?

    1. Water improves the equipment's look
    2. Water voids the equipment's warranty
    3. Water raises shock risk Correct answer.
    4. Water makes equipment run faster

    Explanation

    Water conducts electricity, so electrical equipment near filled bowls increases the risk of electric shock. Equipment should be placed and used according to the manufacturer's safety instructions. Keeping cords and devices away from water is a basic electrical safety rule.

  40. Question 40Infection Control, Sanitation and Safety

    Why should a technician wear a dust mask when filing acrylic nails?

    1. To reduce inhalation of nail dust Correct answer.
    2. To improve the shine of the acrylic
    3. To keep the client's nails from drying
    4. To stop the file from slipping

    Explanation

    Filing acrylic creates fine dust that can be inhaled and irritate the respiratory tract. A dust mask, along with ventilation, helps reduce exposure. Masks do not affect nail drying, shine, or file grip.

  41. Question 41Infection Control, Sanitation and Safety

    A client's health history notes an untreated contagious skin infection on the hands. What should the technician do?

    1. Proceed but shorten the service
    2. Perform the service with extra gloves
    3. Decline and refer to a physician Correct answer.
    4. Apply disinfectant to the client's hands

    Explanation

    A contagious skin infection can spread through contact and may be worsened by nail services. The technician should decline the service and refer the client for medical evaluation. Extra gloves or disinfectant do not make the service safe.

  42. Question 42Infection Control, Sanitation and Safety

    Which label claim indicates a disinfectant is suitable for items contaminated with blood?

    1. Rust inhibiting
    2. Fungicidal
    3. Deodorizing
    4. Tuberculocidal Correct answer.

    Explanation

    A tuberculocidal claim shows the disinfectant can kill mycobacteria, which are relatively resistant and used as a benchmark for bloodborne pathogen efficacy. Salon disinfectants for blood-contaminated items should carry this claim. Fungicidal, deodorizing, and rust-inhibiting claims do not establish that level of efficacy.

  43. Question 43Infection Control, Sanitation and Safety

    How should disinfected metal implements be stored until use?

    1. In a drawer with soiled files
    2. In a cloth bag on the counter
    3. In a clean, covered container Correct answer.
    4. In a bowl of standing water

    Explanation

    Disinfected implements should be stored in a clean, dry, covered container to prevent recontamination before use. They should be kept separate from soiled items. Standing water can support microbial growth.

  44. Question 44Infection Control, Sanitation and Safety

    How should clean towels be stored in the salon?

    1. Under the pedicure bowl
    2. In a closed cabinet Correct answer.
    3. In the same bin as used towels
    4. On the floor near the sink

    Explanation

    Clean linens must be kept separate from soiled linens and protected from dust, moisture, and contamination. A closed cabinet provides appropriate storage. Mixing clean and used towels defeats the purpose of laundering.

  45. Question 45Infection Control, Sanitation and Safety

    What is the purpose of running a spore test on a sterilizer?

    1. To check the sterilizer is working Correct answer.
    2. To shorten the sterilization cycle
    3. To make instruments look shiny
    4. To scent the sterilization chamber

    Explanation

    Spore tests use highly resistant bacterial spores to verify that the sterilizer is actually achieving sterilization. If spores survive, the sterilizer needs servicing. Shine, cycle length, and scent are not the purpose.

  46. Question 46Infection Control, Sanitation and Safety

    Why can a porous item such as a wooden stick not be reliably disinfected for reuse?

    1. Wood is too soft to handle safely
    2. Wood changes color in disinfectant
    3. Disinfectant cannot reach into pores Correct answer.
    4. Wood absorbs too much water and swells

    Explanation

    Porous materials have tiny openings that disinfectant may not penetrate, allowing microorganisms to remain protected inside. Such items cannot be reliably disinfected and should be used once and discarded. Absorption, color change, and softness are not the main infection-control reason.

  47. Question 47Infection Control, Sanitation and Safety

    A technician mixes a disinfectant correctly but soaks implements for only half the labeled contact time. What is the most likely result?

    1. The implements will rust faster
    2. The disinfectant becomes stronger
    3. Some pathogens may survive Correct answer.
    4. The implements become sterile anyway

    Explanation

    Contact time is the period the item must remain wet with the disinfectant for the labeled kill claims to be met. Shortening that time can leave surviving pathogens on the implement. Correct dilution does not make up for insufficient contact time.

  48. Question 48Infection Control, Sanitation and Safety

    Which action best prevents cross-contamination between two clients?

    1. Reusing the same nail file after brushing off the dust
    2. Discarding single-use items and disinfecting tools Correct answer.
    3. Using one pair of gloves for two clients
    4. Wiping the metal nippers on a towel between clients

    Explanation

    Cross-contamination is prevented by using single-use items once and properly cleaning and disinfecting reusable implements between clients. Brushing or wiping does not remove or kill pathogens. Gloves must also be changed between clients.

  49. Question 49Infection Control, Sanitation and Safety

    A technician has a small cut on their hand before starting a service. What should they do?

    1. Ask the client to hold the file
    2. Apply lotion and continue the service
    3. Bandage it and wear gloves Correct answer.
    4. Work without gloves to keep the cut dry

    Explanation

    A cut on the technician's hand must be covered with a waterproof bandage and protected with gloves during service. This protects the technician from bloodborne pathogens and protects the client from the technician's blood. Working without gloves or with lotion does not provide a barrier.

  50. Question 50Infection Control, Sanitation and Safety

    Why should disinfected implements be completely dry before being stored?

    1. Dry implements are easier to sell
    2. Moisture makes metal stronger
    3. Moisture supports microbial growth Correct answer.
    4. Wet implements disinfect faster

    Explanation

    Residual moisture creates conditions where bacteria and fungi can multiply, potentially recontaminating disinfected implements. Drying before storage helps maintain the disinfected state. Sales appeal and metal strength are not the infection-control reasons.

  51. Question 51Nail Care Services and Procedures

    Which implement is used to gently push back the cuticle during a manicure?

    1. Orangewood stick Correct answer.
    2. Cuticle nipper
    3. Credo blade
    4. Metal nail file

    Explanation

    An orangewood stick is a soft wooden tool used to push back the cuticle without cutting living tissue. Nippers are for trimming hangnails, files shape the nail, and a credo blade is used on callus.

  52. Question 52Nail Care Services and Procedures

    When filing a natural nail, the technician should move the file:

    1. back and forth across the free edge
    2. one direction from corner to center Correct answer.
    3. from cuticle to free edge in long strokes
    4. in circles over the nail plate

    Explanation

    Filing in one direction from each corner toward the center reduces stress on the nail plate and helps prevent splitting. Back-and-forth sawing can fray the free edge.

  53. Question 53Nail Care Services and Procedures

    What is the main purpose of applying a base coat before nail polish?

    1. To prevent nail staining Correct answer.
    2. To add a matte texture
    3. To speed up polish drying
    4. To strengthen the nail plate

    Explanation

    A base coat forms a barrier between the natural nail and the pigment in colored polish. It also helps the polish adhere evenly, but its key protective role is preventing staining.

  54. Question 54Nail Care Services and Procedures

    A classic French manicure is characterized by:

    1. natural base with white free edge Correct answer.
    2. a glitter accent applied to every nail
    3. a dark polish painted on the free edge
    4. a single bright red polish on all nails

    Explanation

    A classic French manicure uses a sheer pink or nude base and a crisp white free edge. It is a natural-looking style, not a bright or glitter design.

  55. Question 55Nail Care Services and Procedures

    After use on a client, a metal cuticle pusher should be:

    1. placed in a closed drawer until the next client
    2. wiped with a towel and reused on the next client
    3. cleaned and disinfected with approved solution Correct answer.
    4. rinsed with water and stored in a drawer

    Explanation

    Reusable metal implements must be cleaned to remove debris and then disinfected with a hospital-grade product. Rinsing or wiping alone does not kill microorganisms.

  56. Question 56Nail Care Services and Procedures

    Which nail shape has straight sides with slightly rounded corners?

    1. Almond
    2. Stiletto
    3. Squoval Correct answer.
    4. Oval

    Explanation

    A squoval shape combines a square free edge with slightly rounded corners for strength and comfort. Almond and oval shapes are rounded, while stiletto tapers to a sharp point.

  57. Question 57Nail Care Services and Procedures

    The massage movement that consists of light, gliding strokes is called:

    1. effleurage Correct answer.
    2. petrissage
    3. friction
    4. tapotement

    Explanation

    Effleurage is a series of light, gliding strokes used to begin and end massage. Petrissage involves kneading, tapotement is tapping, and friction uses circular pressure.

  58. Question 58Nail Care Services and Procedures

    What is the primary function of a top coat?

    1. To seal the polish and add shine Correct answer.
    2. To remove oils from the nail plate
    3. To push back the cuticle
    4. To fill ridges in the nail

    Explanation

    A top coat seals the color layers and provides a glossy or protective finish. It helps the manicure resist chipping and adds shine.

  59. Question 59Nail Care Services and Procedures

    A cuticle nipper is appropriate for:

    1. removing callus from the heel
    2. clipping the nail plate at the sidewall
    3. trimming a small hangnail Correct answer.
    4. cutting the entire cuticle away

    Explanation

    Cuticle nippers are intended for removing a small hangnail or dead tissue tag, not for cutting the living cuticle. Aggressive cutting can cause infection and ridge damage.

  60. Question 60Nail Care Services and Procedures

    After applying a nail tip, the technician should blend the seam because:

    1. it changes the tip's color
    2. it sterilizes the tip surface
    3. it prevents a ridge and weak point Correct answer.
    4. it makes the artificial tip longer

    Explanation

    Blending the tip seam removes the ledge where the tip meets the natural nail. A smooth transition reduces lifting and prevents a weak point.

  61. Question 61Nail Care Services and Procedures

    A proper acrylic mixture is described as:

    1. smooth and creamy Correct answer.
    2. dry and crumbly
    3. wet and runny
    4. sticky and stringy

    Explanation

    Acrylic powder and monomer should be mixed to a smooth, creamy consistency that holds its shape. A dry mix is crumbly, while an overly wet mix is runny and slow to set.

  62. Question 62Nail Care Services and Procedures

    Gel nail products are hardened by:

    1. dipping in water
    2. air drying for ten minutes
    3. spraying with an activator
    4. UV or LED light exposure Correct answer.

    Explanation

    Gel products contain photoinitiators that cure when exposed to UV or LED light. Activators are used with some acrylic systems, not standard gels.

  63. Question 63Nail Care Services and Procedures

    For a client with diabetes, the nail technician should:

    1. trim cuticles with nippers
    2. soak feet in very hot water
    3. use a credo blade aggressively on calluses
    4. avoid cutting live tissue and be gentle Correct answer.

    Explanation

    Diabetics often have reduced sensation and slower healing, so aggressive cuticle or callus work can lead to infection. Gentle soaking, careful drying, and avoiding live-tissue cuts are essential.

  64. Question 64Nail Care Services and Procedures

    A nail wrap is mainly used to:

    1. remove excess cuticle tissue
    2. reinforce or repair a natural nail Correct answer.
    3. lengthen the natural nail dramatically
    4. change the color of the nail plate

    Explanation

    Nail wraps use fabric or fiberglass with resin to add strength to a natural nail. They are not a primary lengthening system like tips or forms.

  65. Question 65Nail Care Services and Procedures

    When buffing the natural nail plate, the technician should use:

    1. light strokes with a fine buffer Correct answer.
    2. heavy pressure to flatten ridges
    3. a coarse file first
    4. a credo blade

    Explanation

    Buffing should smooth surface ridges with light pressure and a fine-grit buffer. Heavy or coarse buffing thins the nail plate and can cause damage.

  66. Question 66Nail Care Services and Procedures

    Before applying paraffin wax, the technician should:

    1. heat it until it boils
    2. test the temperature on the client's wrist Correct answer.
    3. apply it directly from the warmer without testing
    4. mix it with acetone

    Explanation

    Paraffin wax should be heated to the manufacturer's safe temperature and tested on the client's wrist before application. Boiling or untested wax can burn the skin.

  67. Question 67Nail Care Services and Procedures

    To achieve an even polish finish, the technician should apply:

    1. color only at the free edge
    2. polish over wet base coat quickly
    3. two thin color coats Correct answer.
    4. one very thick color coat

    Explanation

    Two thin color coats dry more evenly and reduce bubbling or streaking than one thick coat. Thin layers also help the polish adhere and wear well.

  68. Question 68Nail Care Services and Procedures

    During the client consultation, the technician should ask about:

    1. allergies and skin conditions Correct answer.
    2. the client's favorite nail color only
    3. the client's shoe size
    4. the client's hair type

    Explanation

    A consultation must identify allergies, skin conditions, medications, and prior reactions that could affect service safety. Color preference is secondary to health screening.

  69. Question 69Nail Care Services and Procedures

    If a client has a suspected fungal nail infection, the technician should:

    1. refer to a physician and decline service Correct answer.
    2. file the infected nail thoroughly
    3. apply acrylic over the nail
    4. use the same implements on other clients

    Explanation

    Fungal infections are contagious and require medical treatment. The technician should not service the area, and implements that touched it must not be used on others.

  70. Question 70Nail Care Services and Procedures

    When using an electric file on natural nails, the technician should:

    1. use maximum speed
    2. keep the bit moving lightly Correct answer.
    3. hold the bit in one spot
    4. press hard for faster shaping

    Explanation

    An electric file must be kept moving at a controlled speed with light pressure to avoid friction burns and gouges. Holding it in one spot or pressing hard damages the nail plate.

  71. Question 71Nail Care Services and Procedures

    If the nail matrix is damaged, what is the most likely result?

    1. temporary cuticle darkening
    2. increased nail bed sensitivity
    3. faster nail growth
    4. permanent nail deformity Correct answer.

    Explanation

    The matrix contains the cells that create the nail plate, so injury there can permanently alter nail growth. The lunula is only the visible portion of the matrix.

  72. Question 72Nail Care Services and Procedures

    Acrylic enhancement lifts along the sidewalls most likely because:

    1. the monomer was too cold
    2. the client soaked hands before application
    3. the top coat was applied too thin
    4. the nail plate was not properly dehydrated Correct answer.

    Explanation

    Acrylic adhesion depends on a clean, dry, oil-free nail plate. Moisture or oils left on the nail cause lifting, especially along the sidewalls.

  73. Question 73Nail Care Services and Procedures

    Which condition is a contraindication for hand massage?

    1. dry skin on the hands and fingers
    2. short natural fingernails
    3. recent fracture or inflamed joint Correct answer.
    4. light calluses on the palms and heels

    Explanation

    Massage is contraindicated over recent fractures, inflamed joints, open wounds, or suspected infection. Dry skin, short nails, and light calluses are not contraindications.

  74. Question 74Nail Care Services and Procedures

    Which item should be discarded after a single client rather than disinfected?

    1. Metal pusher
    2. Buffer block Correct answer.
    3. Glass bowl
    4. Stainless steel file

    Explanation

    Porous items such as buffer blocks, cotton, and wooden sticks cannot be reliably disinfected and must be discarded after one client. Metal and glass implements can be cleaned and disinfected.

  75. Question 75Nail Care Services and Procedures

    A client's nails show green discoloration under the free edge. The technician should:

    1. refer the client to a physician Correct answer.
    2. soak in vinegar and continue service
    3. apply colored polish to hide the area
    4. file the green area away

    Explanation

    Green-black discoloration under the nail can indicate a bacterial or fungal infection. The technician should not cover it or continue the service, and should refer the client for medical evaluation.

  76. Question 76Nail Care Services and Procedures

    The nail plate is made up mainly of which protein?

    1. Keratin Correct answer.
    2. Elastin
    3. Melanin
    4. Collagen

    Explanation

    The nail plate is formed from layers of compacted, keratinized cells produced by the matrix, and keratin is the structural protein that gives the nail its hardness. Collagen, elastin and melanin serve other roles in skin and nail color.

  77. Question 77Nail Care Services and Procedures

    Which nail shape has straight, tapered sides that end in a flat square edge, like a ballet slipper?

    1. Oval
    2. Coffin Correct answer.
    3. Almond
    4. Round

    Explanation

    The coffin (ballerina) shape is tapered along the sides and finishes in a flat square edge. Almond and oval shapes taper to a rounded tip, and round nails have a curved, untapered edge.

  78. Question 78Nail Care Services and Procedures

    What is the main purpose of a base coat?

    1. Speeds drying of the color coats
    2. Seals the color with a high-gloss finish
    3. Improves adhesion and prevents staining Correct answer.
    4. Adds strength and thickness to the enhancement

    Explanation

    Base coat is applied directly to the bare plate; it promotes adhesion of the color and forms a barrier that keeps polish pigments from staining the nail. Sealing and glossing the finished color is the job of the top coat.

  79. Question 79Nail Care Services and Procedures

    A metal cuticle pusher is used mainly to:

    1. Push the cuticle back from the nail plate Correct answer.
    2. Thin the free edge before a tip is applied
    3. Trim hangnails along the sidewalls
    4. Remove hardened callus from the ball of the foot

    Explanation

    A cuticle pusher is a blunt implement used to ease cuticle tissue off the nail plate so the plate can be prepared for polish or product. Cutting tissue and reducing hard skin require different tools entirely.

  80. Question 80Nail Care Services and Procedures

    When filing the free edge of a natural nail with a hand file, the technician should:

    1. File one direction from corner to center Correct answer.
    2. Use the coarsest grit available for speed
    3. File only the underside of the free edge
    4. Saw back and forth quickly to shape the edge

    Explanation

    One-direction strokes from corner toward center keep the free edge smooth and prevent splitting. Sawing motions create tiny fractures, and coarse grits tear the layers of the nail plate.

  81. Question 81Nail Care Services and Procedures

    Which massage movement consists of brisk, rhythmic tapping or percussive strokes?

    1. Petrissage
    2. Effleurage
    3. Friction
    4. Tapotement Correct answer.

    Explanation

    Tapotement is the percussion family of movements: quick, alternating tapping strokes made with the fingertips or the edge of the hand. Petrissage is kneading, effleurage is gliding, and friction is rubbing.

  82. Question 82Nail Care Services and Procedures

    Which abrasive grit is appropriate for the final light buffing of a natural nail plate?

    1. 100 grit
    2. 80 grit
    3. 60 grit
    4. 240 grit Correct answer.

    Explanation

    Abrasive grit is numbered so that higher numbers are finer. Fine grits of 240 and above are used for light smoothing and buffing of the natural nail, while coarse grits such as 60 to 100 remove product.

  83. Question 83Nail Care Services and Procedures

    Before beginning a manicure service, the technician should first:

    1. Wash and dry both hands thoroughly Correct answer.
    2. Apply cuticle oil to soften the tissue
    3. File all ten nails to final shape
    4. Apply the base coat to the first hand

    Explanation

    Hand washing with soap and warm water removes transient microorganisms and surface oils, and it is the first step before touching the client or handling implements. Product application and filing come after the hands are clean and the service is set up.

  84. Question 84Nail Care Services and Procedures

    When sizing a nail tip, the technician should select a tip that:

    1. Extends past both sidewalls for extra strength
    2. Fits from sidewall to sidewall without touching skin Correct answer.
    3. Is slightly narrower than the client's free edge
    4. Covers the entire plate from cuticle to free edge

    Explanation

    A properly sized tip meets both sidewalls snugly without overlapping the skin, which prevents lifting and moisture trapping. Oversized or undersized tips leave gaps or press on tissue and shorten the wear of the enhancement.

  85. Question 85Nail Care Services and Procedures

    What is the function of nail primer in an acrylic enhancement service?

    1. It adds a pink tint to the finished enhancement
    2. It improves adhesion to the natural nail Correct answer.
    3. It cleans dust and debris from the nail plate
    4. It speeds the curing of the monomer

    Explanation

    Primer is applied to a properly prepared plate to promote bonding between the natural nail and the acrylic. It is not a cleanser, and it contains no pigment or curing accelerator.

  86. Question 86Nail Care Services and Procedures

    When applying gel polish, each coat should be:

    1. Wiped with acetone before curing
    2. Applied heavily so the color is opaque in one pass
    3. Cured only after all color coats are applied
    4. Applied thinly and cured for the specified time Correct answer.

    Explanation

    Gel polish is applied in thin, even coats, and every coat is cured for the time the manufacturer specifies. Thick coats cure unevenly and can wrinkle, shrink or lift; uncured layers trap solvent and weaken the bond.

  87. Question 87Nail Care Services and Procedures

    What is the purpose of a nail dehydrator?

    1. To add shine to the finished enhancement
    2. To remove surface oils and moisture Correct answer.
    3. To dissolve old acrylic product
    4. To soften the cuticle before pushing it back

    Explanation

    Dehydrator removes moisture and oils from the nail plate so an enhancement or gel bonds properly and does not lift. Softening tissue, adding shine and dissolving product are handled by other products.

  88. Question 88Nail Care Services and Procedures

    A nail form is used in an enhancement service to:

    1. Hold a nail tip in place while the glue dries
    2. Shape the cuticle area before product application
    3. Build a sculpted extension over a short nail Correct answer.
    4. Protect the surrounding skin from primer

    Explanation

    A form is fitted under the free edge to create a platform on which enhancement product is built into a sculpted extension, then removed once the product has set. It does not hold tips, shield skin or shape the cuticle area.

  89. Question 89Nail Care Services and Procedures

    In a French manicure, the white tip is applied:

    1. Over the whole nail first, then the pink on top
    2. Only after two coats of top coat have dried
    3. Across the entire free edge in a straight line
    4. Along the free edge, following the smile line Correct answer.

    Explanation

    The white is painted along the free edge following the natural smile line, leaving the sidewalls clear, so the crescent looks balanced. A straight line across the nail or white over the whole plate creates a different design.

  90. Question 90Nail Care Services and Procedures

    Which product is used to soak off a soft gel polish manicure?

    1. Nail dehydrator
    2. Monomer
    3. Cuticle remover
    4. Acetone Correct answer.

    Explanation

    Acetone softens and dissolves cured gel polish after the surface seal is broken, allowing the product to be gently removed. Dehydrator and cuticle remover do not affect cured gel, and monomer is a component of acrylic liquid.

  91. Question 91Nail Care Services and Procedures

    When reducing callus on a client's foot with a foot file or rasp, the technician should work on:

    1. Skin that has been oiled to lubricate the file
    2. Dry skin, using heavy pressure to remove as much as possible
    3. Damp skin, using light pressure in one direction Correct answer.
    4. Only the heel, never the ball of the foot

    Explanation

    Callus is softened by soaking and then reduced on damp skin with light, even strokes. Heavy pressure on dry skin burns and tears tissue, and oiling the skin makes the file slip and clog.

  92. Question 92Nail Care Services and Procedures

    Which client should not receive a paraffin wax treatment?

    1. An older client with thin skin
    2. A client who has just had a polish change
    3. One with an open cut on the hand Correct answer.
    4. A client whose skin is dry and flaky

    Explanation

    Paraffin is not applied over broken skin, because heat and occlusion can worsen the injury and allow contamination. Dry or thin skin can still be treated with a checked, lower wax temperature.

  93. Question 93Nail Care Services and Procedures

    Before applying an enhancement product to the natural nail, the technician should:

    1. Gently remove the surface shine with a fine buffer Correct answer.
    2. Buff the nail plate until it is completely smooth and thin
    3. Apply cuticle oil to keep the plate flexible
    4. Soak the nail in warm water to open the pores

    Explanation

    Only the surface shine needs to be removed, and gentle one-direction strokes with a fine buffer accomplish that without thinning the plate. Over-filing, oil and soaking all interfere with adhesion or damage the nail.

  94. Question 94Nail Care Services and Procedures

    A hot oil manicure differs from a basic manicure mainly because it:

    1. Eliminates the need for any massage
    2. Uses a heated metal tool to shape the nail
    3. Warms oil to condition the skin Correct answer.
    4. Requires the use of acrylic product

    Explanation

    A hot oil manicure uses warmed conditioning oil, often with a heater or prolonged massage, to hydrate and soften the skin and nails. It still includes shaping, cuticle care and massage and uses no enhancement product.

  95. Question 95Nail Care Services and Procedures

    On average, how fast do adult fingernails grow?

    1. About 1 mm per year
    2. About 1/8 inch (3 mm) per month Correct answer.
    3. About 1 inch (25 mm) per month
    4. About 1/2 inch (12 mm) per month

    Explanation

    Adult fingernails grow roughly 1/8 inch, or about 3 mm, per month, with toenails growing more slowly. Growth varies with season, age, health and circulation.

  96. Question 96Nail Care Services and Procedures

    Which structure is the living skin fold that seals and protects the base of the nail plate?

    1. Hyponychium
    2. Lunula
    3. Eponychium Correct answer.
    4. Cuticle

    Explanation

    The eponychium is the living skin fold at the base of the nail that seals the nail pocket against invasion. The cuticle is the thin layer of dead tissue on the plate itself, the lunula is the visible portion of the matrix, and the hyponychium lies under the free edge.

  97. Question 97Nail Care Services and Procedures

    Which liquid monomer is appropriate for use in professional acrylic nail services?

    1. Ethyl methacrylate (EMA) Correct answer.
    2. Acetone
    3. Isopropyl acetate
    4. Methyl methacrylate (MMA)

    Explanation

    Ethyl methacrylate is the monomer intended for salon acrylic systems and gives a flexible, serviceable enhancement. Methyl methacrylate is prohibited or restricted in many jurisdictions because it forms an excessively hard, brittle nail that is difficult to remove and can damage the natural plate.

  98. Question 98Nail Care Services and Procedures

    A client's nail plate has separated from the nail bed and shows a yellowish-white area with a distinct boundary. This condition is called:

    1. Leukonychia
    2. Onychorrhexis
    3. Onycholysis Correct answer.
    4. Paronychia

    Explanation

    Onycholysis is separation of the plate from the nail bed, leaving a whitish or yellowish pocket that grows out with the nail; trauma, aggressive cleaning under the free edge and some disorders are common causes. The other terms describe pigmentation, surrounding tissue and plate texture respectively.

  99. Question 99Nail Care Services and Procedures

    A client reports burning and tenderness after repeated buffing, and the nail plates look thin and shiny. The most likely cause is:

    1. A vitamin deficiency
    2. An allergic reaction to polish
    3. A fungal infection of the nail bed
    4. Excessive filing of the nail plate Correct answer.

    Explanation

    Each buffing pass removes layers of the plate, so repeated or aggressive work leaves it thin, glossy and sensitive. The technician should stop the service and allow the plate to recover rather than adding more product over damaged tissue.

  100. Question 100Nail Care Services and Procedures

    Which statement about LED-cured gels is accurate?

    1. They never require a lamp if applied thinly
    2. They cure faster because of their photoinitiators Correct answer.
    3. They can be cured in any lamp regardless of wavelength
    4. They cure by evaporation of the solvent

    Explanation

    LED lamps emit a narrow band of wavelengths that matches the photoinitiators in LED-curable gels, so these gels set much faster than with UV bulbs. A gel only cures in a lamp whose output matches its photoinitiators, and gel does not cure by solvent evaporation.

  101. Question 101Anatomy, Physiology and Nail Disorders

    What is the primary structural protein that makes up the nail plate?

    1. Collagen
    2. Elastin
    3. Melanin
    4. Keratin Correct answer.

    Explanation

    The nail plate is built from tightly packed, flattened cells that have keratinized, giving the plate its hardness. Keratin is the fibrous protein responsible for that hardness and flexibility.

  102. Question 102Anatomy, Physiology and Nail Disorders

    Which structure produces the nail plate?

    1. Nail groove
    2. Nail matrix Correct answer.
    3. Nail fold
    4. Nail bed

    Explanation

    The matrix is the germinative area at the base of the nail; cells formed there keratinize and are pushed forward to become the plate. Injury to it can permanently change the nail's shape.

  103. Question 103Anatomy, Physiology and Nail Disorders

    The whitish, half-moon-shaped area at the base of the nail is called the:

    1. Mantle
    2. Cuticle
    3. Free edge
    4. Lunula Correct answer.

    Explanation

    The lunula is the pale crescent seen through the plate at the proximal end, where the matrix is thickest and cells are only partly keratinized. It is most prominent on the thumbs and great toes.

  104. Question 104Anatomy, Physiology and Nail Disorders

    The portion of the nail that extends past the fingertip is known as the:

    1. Nail bed
    2. Free edge Correct answer.
    3. Nail root
    4. Nail fold

    Explanation

    The free edge is the unattached distal margin of the plate that projects beyond the fingertip. It is filed and shaped during a manicure service.

  105. Question 105Anatomy, Physiology and Nail Disorders

    The eponychium (cuticle) primarily serves to:

    1. Provide pigment to the nail plate
    2. Attach the nail plate firmly to bone
    3. Seal the nail base from infection Correct answer.
    4. Generate new nail cells continuously

    Explanation

    The eponychium is a living fold of skin that forms a watertight seal where the plate emerges from the proximal fold. That seal keeps moisture in and microbes out.

  106. Question 106Anatomy, Physiology and Nail Disorders

    The nail bed lies directly beneath the:

    1. Nail plate Correct answer.
    2. Eponychium
    3. Lunula
    4. Hyponychium

    Explanation

    The nail bed is the pinkish tissue on which the plate rests, running from the lunula to the hyponychium. It carries blood vessels that give the healthy nail its pink colour.

  107. Question 107Anatomy, Physiology and Nail Disorders

    Compared with fingernails, toenails grow:

    1. Faster
    2. Only in warm weather
    3. More slowly Correct answer.
    4. At the same rate

    Explanation

    Toenails advance roughly 1 mm per month, while fingernails grow about 3 mm per month. Slower growth means toenails retain damage and infection longer.

  108. Question 108Anatomy, Physiology and Nail Disorders

    Small white spots on the nail plate are correctly termed:

    1. Leukonychia Correct answer.
    2. Paronychia
    3. Koilonychia
    4. Onycholysis

    Explanation

    Leukonychia is the term for white discoloration of the plate and is usually caused by minor trauma to the matrix as the nail formed. The spots grow out with the nail.

  109. Question 109Anatomy, Physiology and Nail Disorders

    The hyponychium is best described as the:

    1. Tissue seal beneath the free edge Correct answer.
    2. Growth area at the nail base
    3. Pale crescent near the cuticle
    4. Skin fold along the sidewall

    Explanation

    The hyponychium is the thickened epidermal layer under the free edge that closes the space between plate and fingertip. It is a key barrier against infection and debris.

  110. Question 110Anatomy, Physiology and Nail Disorders

    Onycholysis refers to:

    1. Lengthwise ridging of the plate
    2. Plate separating from the nail bed Correct answer.
    3. Thickening of the nail plate
    4. Inflammation of the nail fold

    Explanation

    Onycholysis is the painless detachment of the plate from its bed, usually starting at the free edge and advancing proximally. Common causes include trauma, moisture and fungal infection.

  111. Question 111Anatomy, Physiology and Nail Disorders

    Transverse grooves across the nail caused by a temporary halt in growth are:

    1. Splinter lines
    2. Beau's lines Correct answer.
    3. Leukonychia
    4. Onychorrhexis

    Explanation

    Beau's lines form when matrix activity stops briefly, producing a horizontal depression that moves outward as the nail grows. Illness, fever and trauma are common triggers.

  112. Question 112Anatomy, Physiology and Nail Disorders

    Spoon-shaped nails that curve upward at the edges suggest:

    1. Nail melanoma
    2. Fungal infection
    3. Psoriasis
    4. Iron deficiency Correct answer.

    Explanation

    Koilonychia, the spoon-nail deformity, is classically linked to iron deficiency anaemia. The technician should refer the client rather than attempt cosmetic correction.

  113. Question 113Anatomy, Physiology and Nail Disorders

    Acute redness, swelling and pain around the nail fold, often with pus, is most consistent with:

    1. Onycholysis
    2. Anonychia
    3. Paronychia Correct answer.
    4. Onychauxis

    Explanation

    Paronychia is inflammation of the nail folds, frequently bacterial after cuticle damage or hangnail picking. It requires referral and should never be worked over.

  114. Question 114Anatomy, Physiology and Nail Disorders

    Green-black discoloration of the nail plate is most often caused by:

    1. Staphylococcus
    2. Candida
    3. Trichophyton
    4. Pseudomonas Correct answer.

    Explanation

    Pseudomonas bacteria thrive in the warm, dark, moist space under a lifted plate and produce green pigment. The discoloration usually stays on the ventral surface of the plate.

  115. Question 115Anatomy, Physiology and Nail Disorders

    An ingrown toenail, in which the edge of the plate presses into the sidewall, is termed:

    1. Onychocryptosis Correct answer.
    2. Onychauxis
    3. Onychorrhexis
    4. Onycholysis

    Explanation

    Onychocryptosis is the medical term for an ingrown nail, most common on the great toe after improper trimming or tight footwear. The tissue becomes painful and may be inflamed.

  116. Question 116Anatomy, Physiology and Nail Disorders

    Fingernails typically grow at a rate of about:

    1. 6 mm per month
    2. 0.5 mm per month
    3. 3 mm per month Correct answer.
    4. 1 mm per month

    Explanation

    Fingernails advance roughly 3 mm (about an eighth of an inch) per month, so a full replacement takes around six months. Toenails grow at about one third of that pace.

  117. Question 117Anatomy, Physiology and Nail Disorders

    Onychauxis describes:

    1. Complete shedding of the nail
    2. Thickening of the nail plate Correct answer.
    3. Softening of the nail plate
    4. Pitting of the nail surface

    Explanation

    Onychauxis is pronounced thickening and overgrowth of the plate, often seen in older clients, after trauma, or with poor circulation. Thick plates require careful filing and may need referral.

  118. Question 118Anatomy, Physiology and Nail Disorders

    Onychorrhexis is characterized by:

    1. White patches on the plate
    2. Horizontal ridges on the plate
    3. Lengthwise splitting of the plate Correct answer.
    4. A thickened, curved nail plate

    Explanation

    Onychorrhexis means brittleness with longitudinal ridges and splitting along the length of the nail. Age, harsh chemicals and repeated wet-dry cycles are common contributors.

  119. Question 119Anatomy, Physiology and Nail Disorders

    Permanent distortion of the growing nail is most likely after injury to the:

    1. Nail matrix Correct answer.
    2. Free edge
    3. Cuticle
    4. Hyponychium

    Explanation

    Because the matrix generates the plate, scarring there produces a lasting ridge, split or deviation. Damage to structures beyond the matrix usually resolves as the nail grows out.

  120. Question 120Anatomy, Physiology and Nail Disorders

    The nail plate is built from how many main layers?

    1. Four
    2. Five
    3. Three Correct answer.
    4. Two

    Explanation

    The plate has three layers: dorsal, intermediate and ventral. The intermediate layer is the thickest and supplies most of the plate's strength.

  121. Question 121Anatomy, Physiology and Nail Disorders

    Splinter hemorrhages appear on the nail as:

    1. White bands across the plate
    2. Rows of small shallow pits
    3. Red-brown lengthwise streaks Correct answer.
    4. Green staining near the free edge

    Explanation

    Splinter hemorrhages are tiny lengthwise bleeds from the bed's capillaries that look like wooden splinters under the plate. Trauma is the usual cause, though systemic disease can also produce them.

  122. Question 122Anatomy, Physiology and Nail Disorders

    Dark pigment spreading onto the proximal nail fold next to a pigmented nail streak (Hutchinson sign) raises concern for:

    1. Subungual melanoma Correct answer.
    2. Pressure bruising
    3. Fungal melanonychia
    4. Subungual hematoma

    Explanation

    Hutchinson sign means pigment has crossed from the plate onto the surrounding skin, suggesting invasive melanoma. Any such finding requires urgent medical referral.

  123. Question 123Anatomy, Physiology and Nail Disorders

    A central horizontal groove with a widened proximal margin, caused by repeated picking at the cuticle area, is:

    1. Habit-tic deformity Correct answer.
    2. Transverse Beau's lines
    3. Spooning koilonychia
    4. Subungual splinter hemorrhage

    Explanation

    Habit-tic deformity results from chronic rubbing or picking of the proximal fold, which intermittently injures the matrix. The result is a midline depression with a stepped cuticle line.

  124. Question 124Anatomy, Physiology and Nail Disorders

    Many small, randomly scattered pits across the nail plate are most characteristic of:

    1. Psoriasis Correct answer.
    2. Fungal infection
    3. Paronychia
    4. Iron deficiency

    Explanation

    Psoriatic nail disease produces irregular pits distributed across the plate, often with onycholysis and oil-drop discoloration. Pitting reflects faulty keratinization at the matrix.

  125. Question 125Anatomy, Physiology and Nail Disorders

    Onychomadesis is best described as:

    1. Inflammation of the lateral nail fold
    2. Thickening of the plate with yellowing
    3. Separation limited to the free edge
    4. Complete shedding after matrix arrest Correct answer.

    Explanation

    Onychomadesis is the full detachment and shedding of the plate when matrix activity stops completely for a period. It may follow severe illness, fever or drug reactions, and a new nail usually regrows.

  126. Question 126Anatomy, Physiology and Nail Disorders

    The part of the nail plate that extends past the fingertip is called the:

    1. nail root
    2. eponychium
    3. lunula
    4. free edge Correct answer.

    Explanation

    The free edge is the distal portion of the nail plate that projects beyond the fingertip. It has no attachment to the nail bed underneath.

  127. Question 127Anatomy, Physiology and Nail Disorders

    The pale half-moon area visible at the base of the nail is the:

    1. lunula Correct answer.
    2. nail bed
    3. hyponychium
    4. cuticle

    Explanation

    The lunula is the visible portion of the nail matrix at the proximal end of the nail plate. Its paler color reflects the immature, less compacted keratin in that region.

  128. Question 128Anatomy, Physiology and Nail Disorders

    Which structure produces the cells that become the nail plate?

    1. nail bed
    2. hyponychium
    3. nail matrix Correct answer.
    4. lateral fold

    Explanation

    The nail matrix contains the germinative cells that divide and keratinize to form the nail plate. The nail bed supports the plate but does not produce its main substance.

  129. Question 129Anatomy, Physiology and Nail Disorders

    The living skin fold that overlaps and seals the base of the nail plate is the:

    1. hyponychium
    2. eponychium Correct answer.
    3. lunula
    4. nail sinus

    Explanation

    The eponychium is the proximal nail fold's living edge that overlaps the base of the nail plate. It helps protect the matrix from infection and moisture loss.

  130. Question 130Anatomy, Physiology and Nail Disorders

    The skin along each side of the nail plate is called the:

    1. lateral fold Correct answer.
    2. matrix
    3. free edge
    4. cuticle

    Explanation

    The lateral folds are the skin ridges that border the sides of the nail plate. They help guide the plate as it grows forward.

  131. Question 131Anatomy, Physiology and Nail Disorders

    A collection of blood trapped under the nail plate after trauma is a subungual:

    1. abscess
    2. hematoma Correct answer.
    3. granuloma
    4. cyst

    Explanation

    A subungual hematoma forms when bleeding occurs between the nail plate and nail bed after injury. The trapped blood appears as a dark red or black area under the plate.

  132. Question 132Anatomy, Physiology and Nail Disorders

    Splitting of the free edge of the nail plate into layers is called:

    1. onychauxis
    2. onychoschizia Correct answer.
    3. onychogryphosis
    4. onycholysis

    Explanation

    Onychoschizia is lamellar splitting at the free edge, often related to repeated wetting and drying. The nail plate separates into thin horizontal layers distally.

  133. Question 133Anatomy, Physiology and Nail Disorders

    Nail biting is known as:

    1. onychophagia Correct answer.
    2. onychocryptosis
    3. onychorrhexis
    4. onychomycosis

    Explanation

    Onychophagia is the habit of biting or chewing the nails. It can damage the nail plate and increase the risk of paronychia.

  134. Question 134Anatomy, Physiology and Nail Disorders

    Nail pterygium refers to the:

    1. fold adhering to the plate Correct answer.
    2. formation of a transverse groove
    3. growth of a tumor under the nail
    4. spread of fungus into the matrix

    Explanation

    In nail pterygium, the proximal nail fold fuses with and grows over the nail plate. This can obliterate the cuticle and is often seen after lichen planus.

  135. Question 135Anatomy, Physiology and Nail Disorders

    Onychogryphosis is best characterized by:

    1. deep transverse ridges after growth arrest
    2. thickening with a curved, horn-like shape Correct answer.
    3. separation of the plate from the bed
    4. lamellar splitting at the free edge

    Explanation

    Onychogryphosis is marked hypertrophy of the nail plate with thickening and curving, often compared to a ram's horn. It is seen most often on toenails in older or neglected feet.

  136. Question 136Anatomy, Physiology and Nail Disorders

    The most common cause of toenail onychomycosis is:

    1. dermatophyte fungi Correct answer.
    2. Candida albicans
    3. Pseudomonas aeruginosa
    4. herpes simplex virus

    Explanation

    Dermatophytes, especially Trichophyton rubrum, are the most frequent cause of toenail fungal infection. Candida and non-dermatophyte molds are less common causes.

  137. Question 137Anatomy, Physiology and Nail Disorders

    Pitting in nail psoriasis results from:

    1. bleeding beneath the nail plate after trauma
    2. separation of the hyponychium from the plate
    3. thickening of the nail bed with hyperkeratosis
    4. defective proximal matrix keratinization Correct answer.

    Explanation

    Psoriatic pits form when parakeratotic cells are shed from the surface of the proximal nail matrix as the plate grows out. The result is small depressions scattered across the nail plate.

  138. Question 138Anatomy, Physiology and Nail Disorders

    Chronic paronychia is most often associated with:

    1. longitudinal melanonychia
    2. acute bacterial pus formation
    3. loss of the cuticle seal Correct answer.
    4. a subungual hematoma

    Explanation

    Chronic paronychia typically follows repeated exposure to moisture and loss of the cuticle barrier. Candida and mixed organisms may then colonize the inflamed nail fold.

  139. Question 139Anatomy, Physiology and Nail Disorders

    Terry's nails show:

    1. a single white band across the plate
    2. white proximal nail, pink distal band Correct answer.
    3. paired white transverse lines
    4. yellow slow-growing nails

    Explanation

    Terry's nails are characterized by a white or ground-glass proximal nail bed with a narrow pink-to-brown distal band. They are classically linked to liver disease.

  140. Question 140Anatomy, Physiology and Nail Disorders

    Muehrcke's lines are associated with:

    1. liver cirrhosis
    2. hypoalbuminemia Correct answer.
    3. chronic hypoxia
    4. arsenic poisoning

    Explanation

    Muehrcke's lines are paired white transverse bands that reflect decreased serum albumin. They are a systemic sign rather than a local nail disease.

  141. Question 141Anatomy, Physiology and Nail Disorders

    Mees' lines are most associated with:

    1. arsenic exposure Correct answer.
    2. iron deficiency
    3. psoriasis
    4. lichen planus

    Explanation

    Mees' lines are single transverse white bands that can follow arsenic exposure, chemotherapy, or systemic illness. They represent a temporary disruption of nail matrix keratinization.

  142. Question 142Anatomy, Physiology and Nail Disorders

    Yellow nail syndrome classically includes:

    1. white nails, liver disease and tremor
    2. spoon nails, iron deficiency and fatigue
    3. pitted nails, arthritis and eye inflammation
    4. yellow nails, lymphedema and lung disease Correct answer.

    Explanation

    Yellow nail syndrome is a triad of yellow, thickened, slow-growing nails, lymphedema, and respiratory disease. The nail changes are often accompanied by loss of the cuticle.

  143. Question 143Anatomy, Physiology and Nail Disorders

    Clubbing of the nails is most associated with:

    1. liver cirrhosis
    2. hypothyroidism
    3. iron deficiency anemia
    4. chronic hypoxia Correct answer.

    Explanation

    Clubbing involves increased nail curvature and bulbous enlargement of the fingertip. It is classically associated with chronic hypoxia from lung disease or with certain gastrointestinal disorders.

  144. Question 144Anatomy, Physiology and Nail Disorders

    A subungual wart is caused by:

    1. human papillomavirus Correct answer.
    2. a pus-forming bacterium
    3. a dermatophyte fungus
    4. a Candida yeast species

    Explanation

    Subungual warts are caused by human papillomavirus infection. They can lift the nail plate and may be mistaken for other nail dystrophies.

  145. Question 145Anatomy, Physiology and Nail Disorders

    A painful, bluish, temperature-sensitive nodule under the nail is most likely a:

    1. pyogenic granuloma
    2. subungual wart
    3. glomus tumor Correct answer.
    4. subungual hematoma

    Explanation

    A glomus tumor is a small, painful vascular lesion that can appear as a bluish spot beneath the nail. It is classically sensitive to cold and pressure.

  146. Question 146Anatomy, Physiology and Nail Disorders

    The main structural protein of the nail plate is:

    1. melanin
    2. hard keratin Correct answer.
    3. elastin
    4. collagen

    Explanation

    The nail plate is composed mainly of hard keratin, with many disulfide bonds that give it strength. Collagen and elastin are more characteristic of skin and connective tissue.

  147. Question 147Anatomy, Physiology and Nail Disorders

    The nail sinus is the:

    1. groove along the lateral fold
    2. gap under the proximal fold Correct answer.
    3. space under the free edge
    4. seal formed by the hyponychium

    Explanation

    The nail sinus is the space between the proximal nail fold and the nail plate. It is a site where debris can collect and where infection may begin.

  148. Question 148Anatomy, Physiology and Nail Disorders

    The proximal part of the nail matrix mainly produces the:

    1. hyponychium
    2. nail bed
    3. dorsal plate Correct answer.
    4. lateral folds

    Explanation

    The proximal matrix gives rise to the dorsal layer of the nail plate, while the distal matrix forms the ventral layer. Injury to the proximal matrix can therefore affect the upper plate.

  149. Question 149Anatomy, Physiology and Nail Disorders

    Nail lichen planus commonly causes:

    1. thinning with pterygium Correct answer.
    2. white spots from minor trauma
    3. thick yellow nails with slow growth
    4. painful bluish nodules under the nail

    Explanation

    Nail lichen planus often produces thinning, longitudinal ridging, and pterygium formation as the proximal fold fuses with the plate. Severe cases may lead to permanent nail loss.

  150. Question 150Anatomy, Physiology and Nail Disorders

    Which factor is associated with faster nail growth?

    1. advanced age
    2. pregnancy Correct answer.
    3. malnutrition
    4. cold weather

    Explanation

    Nail growth tends to increase during pregnancy because of hormonal and metabolic changes. Growth is generally slower in advanced age, cold weather, and poor nutritional states.

  151. Question 151Oregon Laws, Rules and Salon Business Practices

    Which Oregon agency administers the licensing of nail technicians and salons?

    1. The Oregon Department of Education
    2. The Oregon Health Licensing Office, which oversees the Board of Cosmetology Correct answer.
    3. The Oregon Board of Pharmacy
    4. The Oregon Board of Nursing

    Explanation

    Cosmetology and nail technology licensing in Oregon is administered by the Health Licensing Office, which provides staff support to the Board of Cosmetology. The Board sets policy and the Office issues and renews licenses, handles complaints, and conducts inspections.

  152. Question 152Oregon Laws, Rules and Salon Business Practices

    Which statement about performing nail services for payment in Oregon is correct?

    1. A current Oregon nail technician license is required. Correct answer.
    2. A city business license is sufficient to begin taking clients.
    3. A license is needed only when artificial nails are applied.
    4. Any person may perform manicures if the fee is under $20.

    Explanation

    Oregon requires a valid nail technology license for anyone who performs nail services for compensation, regardless of the price charged or the type of service. A general business license does not substitute for a practitioner license.

  153. Question 153Oregon Laws, Rules and Salon Business Practices

    Which item should be discarded after use on a single client?

    1. A glass mixing dish
    2. A pair of metal nippers
    3. A stainless steel cuticle pusher
    4. An emery board Correct answer.

    Explanation

    Porous items such as emery boards, buffer blocks, and wooden sticks cannot be effectively cleaned and disinfected, so they must be thrown away or given to the client after use. Non-porous metal and glass implements can be cleaned and disinfected for reuse.

  154. Question 154Oregon Laws, Rules and Salon Business Practices

    Before beginning a nail service, the technician should do which of the following?

    1. Wash the hands with soap and warm water Correct answer.
    2. Wipe the hands on a clean towel
    3. Pass the hands under a UV lamp
    4. Apply a generous layer of hand lotion

    Explanation

    Routine hand washing with soap and warm water is required before and after each client contact to reduce the spread of microorganisms. Hand sanitizer may be used in addition but is not a substitute for washing when hands are soiled.

  155. Question 155Oregon Laws, Rules and Salon Business Practices

    A client arrives with a trained service dog. How should the salon respond?

    1. Require the client to mail in certification papers first
    2. Charge an extra cleaning fee before the service
    3. Allow the dog to accompany the client into the salon Correct answer.
    4. Refuse entry because animals are never allowed in salons

    Explanation

    Service animals are permitted in public accommodations, including salons, and may not be excluded or surcharged. Pets that are not service animals are generally prohibited for sanitation reasons.

  156. Question 156Oregon Laws, Rules and Salon Business Practices

    Reusable metal implements must be disinfected using which of the following?

    1. Soap and water alone
    2. A closed ultraviolet cabinet only
    3. An EPA-registered hospital-grade disinfectant Correct answer.
    4. Rubbing alcohol swabs

    Explanation

    After cleaning with soap and water, reusable implements must be immersed in an EPA-registered hospital-grade disinfectant that carries a tuberculocidal claim. Soap and water remove debris but do not disinfect.

  157. Question 157Oregon Laws, Rules and Salon Business Practices

    Which is a proper use of an individual's Oregon nail technician license?

    1. Using it to cover for an unlicensed coworker
    2. Selling it to the new owner of the salon
    3. Loaning it to an assistant during a busy week
    4. Keeping it valid and available for inspection Correct answer.

    Explanation

    A license is issued to one individual and must be maintained in good standing and available for inspection by the Office. It may not be sold, transferred, or lent to another person.

  158. Question 158Oregon Laws, Rules and Salon Business Practices

    During a manicure a client's cuticle begins to bleed. What should the technician do?

    1. Continue the service without changing anything
    2. Put on clean gloves before continuing the service Correct answer.
    3. Apply acrylic over the area to seal it
    4. Wipe the area with a dry towel and keep working

    Explanation

    When blood is present the technician must don clean gloves before continuing and follow bloodborne pathogen precautions. Any contaminated disposable items must be discarded and the work area disinfected.

  159. Question 159Oregon Laws, Rules and Salon Business Practices

    What is the first step in reprocessing reusable metal implements after a service?

    1. Wipe them with a disinfecting wipe
    2. Wash them with soap and water and dry them Correct answer.
    3. Submerge them in disinfectant
    4. Place them in a drawer until the end of the day

    Explanation

    Cleaning with soap and water must come before disinfection because organic debris can inactivate the disinfectant. Once washed and dried, the implements are fully submerged for the label contact time.

  160. Question 160Oregon Laws, Rules and Salon Business Practices

    After each pedicure, the foot basin must be:

    1. Wiped out with a dry paper towel
    2. Cleaned once at the end of the business day
    3. Rinsed with warm water only
    4. Drained, cleaned, and disinfected with an EPA-registered disinfectant Correct answer.

    Explanation

    Pedicure basins must be drained, cleaned of debris, and disinfected after every client because the warm, wet environment supports microbial growth. Manufacturer instructions for the equipment and the disinfectant must be followed.

  161. Question 161Oregon Laws, Rules and Salon Business Practices

    Blood is spilled on the salon floor. What is the correct procedure?

    1. Sweep the area and resume work
    2. Mop with plain water and let it air dry
    3. Cover the spill with a towel and finish the client first
    4. Put on gloves, absorb the spill, and disinfect the area with an EPA-registered disinfectant Correct answer.

    Explanation

    Spills involving blood must be handled with gloves, absorbed with disposable material, and then disinfected with an appropriate product. Contaminated materials are placed in a closed container for disposal and hands are washed afterward.

  162. Question 162Oregon Laws, Rules and Salon Business Practices

    Which of these items cannot be reliably disinfected and therefore must be discarded after use?

    1. A glass mixing dish
    2. A foam buffer block Correct answer.
    3. A stainless steel pusher
    4. A pair of metal nippers

    Explanation

    Porous materials absorb moisture and products and cannot be cleaned of all debris, so disinfectant cannot reach microorganisms within them. Foam buffers, emery boards, and wooden sticks are therefore single-use items.

  163. Question 163Oregon Laws, Rules and Salon Business Practices

    A nail technician rents a booth in a salon. In general, how is she treated for business purposes?

    1. She is automatically an employee of the salon owner
    2. She is an independent contractor responsible for her own taxes and insurance Correct answer.
    3. She is exempt from holding a license because she rents space
    4. She may practice under the salon owner's license

    Explanation

    A booth renter operates as an independent contractor: she sets her own schedule, keeps her own records, and handles her own taxes and insurance. She must still hold a current individual license and work in a licensed establishment.

  164. Question 164Oregon Laws, Rules and Salon Business Practices

    In Oregon, which of the following must hold its own license?

    1. Each individual client receiving services
    2. The landlord who owns the building
    3. The salon establishment where services are performed Correct answer.
    4. The distributor that sells nail products

    Explanation

    Licensure applies at two levels: the establishment must hold a salon license and every practitioner must hold an individual license. Clients, suppliers, and property owners are not licensed by the Office.

  165. Question 165Oregon Laws, Rules and Salon Business Practices

    Safety Data Sheets for the products used in the salon should be:

    1. Kept in the salon and accessible to employees Correct answer.
    2. Mailed to the Board of Cosmetology each year
    3. Posted in the front window for clients
    4. Kept only by the supplier or manufacturer

    Explanation

    Safety Data Sheets communicate hazard, handling, and first-aid information for chemicals used in the workplace and must be readily available to workers. They should be stored where staff can reach them in an emergency.

  166. Question 166Oregon Laws, Rules and Salon Business Practices

    Which service may an Oregon nail technician legally perform?

    1. Treating an infected toenail with a medicated solution
    2. Trimming away living tissue with a nipper
    3. Filing and shaping the natural nail plate Correct answer.
    4. Cutting calluses with a credo blade

    Explanation

    Nail technology covers cleansing, shaping, polishing, and enhancing the nails and surrounding non-living tissue. Cutting living tissue, using blade tools on calluses, and treating disease are outside the scope of the license.

  167. Question 167Oregon Laws, Rules and Salon Business Practices

    A client has a red, swollen toe with pus around the nail. What should the technician do?

    1. Trim the nail deeply to relieve pressure
    2. Apply an acrylic overlay to protect the toe
    3. Soak the toe and proceed with the pedicure
    4. Decline the service and refer the client to a physician Correct answer.

    Explanation

    Signs of infection are outside the nail technician's scope of practice, so service must be declined and the client referred to a health care provider. Working on infected tissue risks spreading infection and may constitute unlicensed medical treatment.

  168. Question 168Oregon Laws, Rules and Salon Business Practices

    Which practice best prevents cross-contamination when applying nail polish?

    1. Wipe the used brush on a towel and then redip it
    2. Use one brush for all clients throughout the day
    3. Do not dip a brush that has touched a nail back into the bottle Correct answer.
    4. Thin the polish with tap water between clients

    Explanation

    Once a brush contacts a client's nail it can carry microorganisms into the bottle, so product should be dispensed onto a clean surface or palette. Brushes that touch a client must be cleaned before reuse with another client.

  169. Question 169Oregon Laws, Rules and Salon Business Practices

    Advertising for a nail salon must be:

    1. Renewed every year with the salon license
    2. Approved by the Board before it is published
    3. Printed only in English
    4. Truthful and not misleading to the public Correct answer.

    Explanation

    Advertising rules prohibit false or deceptive claims about services, credentials, or prices. Statements implying a practitioner holds a license or qualification she does not have are a violation.

  170. Question 170Oregon Laws, Rules and Salon Business Practices

    A technician's Oregon license expires and she has not yet renewed it. What is her status?

    1. She may work if the salon owner supervises her
    2. She may keep working until the end of the month
    3. She may renew later and keep working in the meantime
    4. She must stop practicing until the license is renewed Correct answer.

    Explanation

    An expired license is not a valid license, so performing services in the interim is unlicensed practice. The technician must complete renewal and hold a current license before returning to work.

  171. Question 171Oregon Laws, Rules and Salon Business Practices

    A salon owner rents space to several independent nail technicians. What responsibility does the owner have regarding licensure?

    1. The owner must make sure everyone providing services in the salon holds a current license Correct answer.
    2. The owner is responsible for paying the renters' income taxes
    3. The owner may let renters practice under the owner's license
    4. The owner has no duty to check renters because they are independent

    Explanation

    The establishment license carries an obligation to ensure that services are provided only by properly licensed individuals. Allowing an unlicensed person to work in the salon exposes both the renter and the owner to penalties.

  172. Question 172Oregon Laws, Rules and Salon Business Practices

    How long must reusable implements remain submerged in the disinfectant?

    1. Overnight, then rinsed in the morning
    2. For the full contact time stated on the product label Correct answer.
    3. Five minutes for every product
    4. Ten seconds is sufficient

    Explanation

    Disinfectants are registered for a specific contact time, and the product does not achieve its claimed kill until that time has elapsed. The label directions govern, and the solution must also be changed according to the label.

  173. Question 173Oregon Laws, Rules and Salon Business Practices

    How should reusable electric nail drill bits be handled between clients?

    1. Stored loose in a drawer with used files
    2. Cleaned and then disinfected before use on another client Correct answer.
    3. Shared among clients without processing
    4. Cleaned once at the end of each week

    Explanation

    Drill bits contact the nail and skin and are reusable, so they must be cleaned and disinfected between clients like other non-porous implements. Bits that cannot be effectively cleaned must be discarded.

  174. Question 174Oregon Laws, Rules and Salon Business Practices

    Client intake and service records should be:

    1. Kept confidential and stored securely Correct answer.
    2. Posted at the station so coworkers can consult them
    3. Shared openly with other clients as examples
    4. Thrown away immediately after each visit

    Explanation

    Client records may contain health and contact information and should be protected from casual access and disclosed only as required by law. Secure storage also preserves service history that is useful if a reaction or complaint arises.

  175. Question 175Oregon Laws, Rules and Salon Business Practices

    A technician wants to add a new service using a motorized tool with an abrasive blade for callus reduction. What is the best course of action?

    1. Offer the service and see whether clients like it
    2. Confirm the tool and procedure are permitted under Oregon rules before offering it Correct answer.
    3. Assume any tool sold to salons is automatically permitted
    4. Ask a coworker to demonstrate it first

    Explanation

    Scope of practice is defined by statute and rule, and tools that cut or abrade living tissue may fall outside nail technology. Verifying the rule first protects the technician from discipline and protects clients from injury.

  176. Question 176Oregon Laws, Rules and Salon Business Practices

    In Oregon, where should a salon keep its current salon license?

    1. Stored with the salon's tax records
    2. Posted where clients can see it Correct answer.
    3. Kept in the receptionist's desk drawer
    4. Locked in the owner's private office

    Explanation

    Oregon requires the current salon license to be displayed conspicuously in the salon so clients and inspectors can see it. Locking it away does not meet the display requirement.

  177. Question 177Oregon Laws, Rules and Salon Business Practices

    What should a nail technician do immediately before starting a client's manicure?

    1. Rinse hands in disinfectant solution
    2. Apply hand lotion and begin
    3. Wash hands with soap and water Correct answer.
    4. Wipe hands on a clean towel only

    Explanation

    Hands must be washed with soap and water before beginning a service, then dried with a clean towel. Disinfectant is for implements and surfaces, not skin.

  178. Question 178Oregon Laws, Rules and Salon Business Practices

    After a cloth towel is used on one client, what must be done before it is used on another client?

    1. Air-dry it and fold it neatly
    2. Spray it with disinfectant and reuse
    3. Launder it Correct answer.
    4. Wipe it with a dry paper towel

    Explanation

    Cloth linens are reusable only after laundering, and soiled towels must not go from one client to another. Disinfectant spray does not substitute for laundering.

  179. Question 179Oregon Laws, Rules and Salon Business Practices

    Under Oregon indoor air rules, smoking and vaping inside a nail salon are:

    1. Prohibited Correct answer.
    2. Allowed only after business hours
    3. Allowed in the break room
    4. Allowed if clients give consent

    Explanation

    Oregon's indoor air laws prohibit smoking and vaping inside workplaces, including nail salons. Break rooms and after-hours use are not exceptions.

  180. Question 180Oregon Laws, Rules and Salon Business Practices

    A metal nipper falls onto the floor during a service. What must happen before it is used again?

    1. It may be wiped with a dry paper towel
    2. It may be placed back in the drawer
    3. It must be cleaned and disinfected Correct answer.
    4. It may be rinsed under warm water only

    Explanation

    An implement that contacts the floor is contaminated and must be cleaned and then disinfected before reuse. Wiping or rinsing alone does not meet the disinfection requirement.

  181. Question 181Oregon Laws, Rules and Salon Business Practices

    How should disposable items contaminated with blood be discarded?

    1. In an open wastebasket
    2. In the regular trash can
    3. In a biohazard container Correct answer.
    4. In the client's paper towel

    Explanation

    Items contaminated with blood must be placed in a closed biohazard container for proper disposal. Regular trash and open containers expose workers and clients to bloodborne pathogens.

  182. Question 182Oregon Laws, Rules and Salon Business Practices

    How must aisles and exits in a nail salon be maintained?

    1. Clear and unobstructed Correct answer.
    2. Used for product storage
    3. Blocked only during busy hours
    4. Locked to prevent theft

    Explanation

    Aisles and exits must stay clear so clients and staff can leave quickly in an emergency. Storage or locking of exit routes creates a fire and safety hazard.

  183. Question 183Oregon Laws, Rules and Salon Business Practices

    A nail technician who is impaired by alcohol or drugs may:

    1. Not perform services on clients Correct answer.
    2. Work only with a coworker present
    3. Work only on family members
    4. Perform services if no cuts occur

    Explanation

    A technician who is impaired cannot safely provide services and must not work on clients. Impairment creates risks for both the client and the technician.

  184. Question 184Oregon Laws, Rules and Salon Business Practices

    Which disinfectant is appropriate for reusable nail implements in Oregon?

    1. A hospital-grade, EPA-registered product Correct answer.
    2. Rubbing alcohol kept in a labeled spray bottle
    3. Hydrogen peroxide from a first-aid kit
    4. Dish soap mixed with warm water

    Explanation

    Reusable implements must be treated with an EPA-registered hospital-grade disinfectant used according to its label. Alcohol, soap, and first-aid peroxide are not appropriate salon disinfectants.

  185. Question 185Oregon Laws, Rules and Salon Business Practices

    How should a technician prepare a disinfecting solution for implements?

    1. Follow the label instructions Correct answer.
    2. Use hot water to speed up the process
    3. Mix until the solution looks cloudy
    4. Double the concentrate to save time

    Explanation

    Disinfectants must be mixed and used exactly according to the manufacturer's label, including dilution and contact time. Stronger or hotter mixtures are not automatically better and can be unsafe.

  186. Question 186Oregon Laws, Rules and Salon Business Practices

    A technician pours disinfectant into an unmarked spray bottle. What is required?

    1. The bottle must be replaced after each client
    2. The bottle must be stored in a locked cabinet
    3. The bottle may remain unlabeled if used daily
    4. The bottle must be labeled Correct answer.

    Explanation

    When a product is transferred out of its original container, the secondary container must be labeled with the product name. This prevents accidental mixing and exposure.

  187. Question 187Oregon Laws, Rules and Salon Business Practices

    How should a reusable cape be handled between clients?

    1. Spray it with water and hang it up
    2. Launder it before reuse Correct answer.
    3. Turn it inside out and reuse it
    4. Brush off visible hair and reuse it

    Explanation

    A cape that touches the client must be clean for each client, either by laundering or by using a disposable cape. Brushing or spraying alone does not clean the fabric.

  188. Question 188Oregon Laws, Rules and Salon Business Practices

    Which task requires a medical license rather than a nail technician license?

    1. Applying nail polish to the nail plate
    2. Shaping the free edge with a file
    3. Cleaning under the free edge
    4. Cutting into living skin Correct answer.

    Explanation

    Nail technicians may shape, polish, and clean nails but may not cut into living skin. Cutting living tissue is a medical act outside the nail technician scope.

  189. Question 189Oregon Laws, Rules and Salon Business Practices

    A client asks whether a dark streak on the nail is melanoma. What should the technician do?

    1. Apply opaque polish to hide it
    2. Refer the client to a physician Correct answer.
    3. Diagnose it as a bruise and continue
    4. File the nail down to remove the streak

    Explanation

    A nail technician cannot diagnose skin or nail disease. A suspicious dark streak should be referred to a physician for evaluation.

  190. Question 190Oregon Laws, Rules and Salon Business Practices

    What should a technician do when an authorized licensing inspector arrives during business hours?

    1. Allow the inspection Correct answer.
    2. Ask the inspector to return after closing
    3. Hide client records in a back room
    4. Refuse entry without a police officer

    Explanation

    Licensed facilities and practitioners must allow authorized inspections during business hours and provide access to required records. Refusing or hiding records can lead to disciplinary action.

  191. Question 191Oregon Laws, Rules and Salon Business Practices

    When using a nail drill that creates dust, the technician should:

    1. Use local exhaust ventilation Correct answer.
    2. Blow the dust toward the client
    3. Rely on an open window in another room
    4. Wear a cloth mask and continue

    Explanation

    Nail dust should be captured at the source with local exhaust ventilation to protect the technician and client. Blowing dust or relying on distant ventilation spreads particles.

  192. Question 192Oregon Laws, Rules and Salon Business Practices

    How should acrylic monomer be stored?

    1. In a refrigerator with food
    2. In an open bowl near the work lamp
    3. In a plastic bag under the sink
    4. In a closed, labeled container Correct answer.

    Explanation

    Monomer is flammable and should be kept in a closed, labeled container away from heat and ignition sources. Open containers also release strong vapors.

  193. Question 193Oregon Laws, Rules and Salon Business Practices

    What is required for a salon's first-aid supplies?

    1. They may be replaced by a phone number
    2. They are needed only if a client requests them
    3. They must be locked in the owner's car
    4. They must be accessible and stocked Correct answer.

    Explanation

    A salon must keep first-aid supplies accessible and stocked so minor injuries can be addressed promptly. Locking them away or substituting a phone number does not meet the need.

  194. Question 194Oregon Laws, Rules and Salon Business Practices

    Where should technicians eat meals?

    1. Over the disinfection tray
    2. In a designated break area Correct answer.
    3. At the pedicure basin between clients
    4. At the manicure table during services

    Explanation

    Eating should occur in a designated area away from service stations to prevent contamination of food and client areas. Food and drink should not be at work surfaces.

  195. Question 195Oregon Laws, Rules and Salon Business Practices

    How should used razor blades or sharp metal bits be discarded?

    1. In the regular trash wrapped in tissue
    2. In a sharps container Correct answer.
    3. In the salon's recycling bin
    4. In a paper cup on the station

    Explanation

    Sharp items must go into a puncture-resistant sharps container to prevent injury and exposure to bloodborne pathogens. Regular trash and recycling bins are not safe for sharps.

  196. Question 196Oregon Laws, Rules and Salon Business Practices

    A salon changes ownership but keeps the same name and location. What generally happens to the salon license?

    1. The new owner may use a copy of the old license
    2. No action is needed if the name is unchanged
    3. The old license remains valid for the new owner
    4. A new license is required Correct answer.

    Explanation

    A salon license is issued to a specific owner and is not transferable. A change of ownership generally requires a new license application.

  197. Question 197Oregon Laws, Rules and Salon Business Practices

    A salon advertises that its files are 'sterilized' when they are only disinfected. This is:

    1. Prohibited as misleading Correct answer.
    2. Required to attract new clients
    3. Allowed because files are single-use
    4. Acceptable if clients do not complain

    Explanation

    Advertising must be truthful, so claiming sterilization when only disinfection occurred is misleading and prohibited. Disinfection and sterilization are not interchangeable terms.

  198. Question 198Oregon Laws, Rules and Salon Business Practices

    An independent contractor nail technician rents a chair in a salon. Who is responsible for ensuring her services meet Oregon sanitation rules?

    1. The technician herself Correct answer.
    2. Only the salon owner, because of the rental
    3. The receptionist who books appointments
    4. No one, because she is independent

    Explanation

    Each licensed practitioner is responsible for following sanitation rules for her own services, even when renting a chair. The salon owner also has duties, but the technician cannot delegate her own compliance.

  199. Question 199Oregon Laws, Rules and Salon Business Practices

    A licensed technician moves to a new address. What should she do?

    1. Tell only her salon owner
    2. Notify the licensing agency Correct answer.
    3. Wait until the next renewal to report it
    4. Write the new address on her license

    Explanation

    A licensee must keep the licensing agency informed of a current address so renewal and official notices reach her. Writing on the license or telling only the salon owner is not enough.

  200. Question 200Oregon Laws, Rules and Salon Business Practices

    A salon receives a complaint that an unlicensed person is performing manicures. Which agency has authority to investigate?

    1. The local fire department
    2. The state licensing office Correct answer.
    3. The salon's product supplier
    4. The Better Business Bureau

    Explanation

    The state licensing agency has authority to investigate complaints of unlicensed practice and enforce the cosmetology rules. Other organizations do not have that regulatory authority.

OR Nail Technician flashcards

32 cards. Read the term and the definition here. The deck at the top of this page is optional.

Pathogenic bacteria
Bacteria that cause disease in humans, such as Staphylococcus aureus and Pseudomonas aeruginosa. They spread through unclean implements, unwashed hands, and contaminated water or surfaces.
Cocci bacilli spirilla
The three bacterial shapes: cocci are round, bacilli are rod-shaped, and spirilla are spiral or corkscrew-shaped. Shape is one way organisms are identified under a microscope.
Bacterial spores
Dormant forms produced by some bacteria that resist heat and many chemicals. Ordinary salon disinfectants may not kill spores, so items contacting spores require sterilization.
Bloodborne pathogens
Disease-causing microorganisms carried in blood and body fluids, notably hepatitis B, hepatitis C, and HIV. They enter the body through broken skin, needlesticks, or mucous membranes.
Universal precautions
An infection-control rule treating all blood and body fluids as potentially infectious. Barriers such as gloves are used with every client regardless of known health status.
Handwashing time
Lather soap with running water and rub all surfaces for at least 20 seconds, then rinse and dry with a single-use towel. Perform before and after every client.
Disinfection
Use of an EPA-registered chemical to kill most microorganisms, including most bacteria and viruses, on hard nonporous surfaces and implements. It does not reliably destroy bacterial spores.
Sterilization
Complete destruction of all microorganisms including bacterial spores, usually by autoclave or steam under pressure. It is the highest level of decontamination in infection control.
EPA-registered disinfectant
A product with an EPA registration number and label claims such as hospital-grade or tuberculocidal, approved for killing pathogens on nonporous salon surfaces and implements.
Single-use porous items
Items such as emery boards, buffers, wooden sticks, cotton, and towels that absorb liquids and cannot be disinfected. They must be discarded after one client.
Blood spill procedure
Wearing gloves, absorb the spill with a disposable towel, clean with soap and water, disinfect with an EPA-registered product or 1:10 bleach solution, and seal waste in a bag.
Safety Data Sheet
An OSHA-required document for each chemical listing hazards, first aid, handling, and spill response. It must be kept in the salon and accessible to all workers.
GFCI outlet
A ground-fault circuit interrupter that cuts power when it detects current leaking to ground. Required near sinks and water sources to prevent electric shock.
Base coat function
A thin first layer that bonds to the natural nail, prevents pigment staining, and improves adhesion so polish lasts longer. It is applied before color coats.
Monomer and polymer
The liquid monomer and powder polymer that react chemically to form acrylic enhancements. Correct mixing ratio creates a workable bead that cures strong rather than brittle.
Squoval nail shape
A square nail with softened, rounded corners. It reduces corner snagging while keeping a wide, straight free edge, suiting most nail beds and active clients.
Nail dehydrator
A liquid applied to the natural nail before enhancements to remove surface oils and moisture and improve adhesion. Overuse or heavy abrasion can thin and sensitize the plate.
Acetone soak removal
The standard removal method for acrylic and soft gel: file the top layer, soak in acetone 10-15 minutes, then gently push off softened product without forcing.
Massage stroke direction
In hand and foot massage, strokes move distal to proximal toward the heart with light pressure, avoiding varicose veins, bruises, and inflamed or broken skin.
Nail file grit
A number showing abrasive coarseness: lower numbers near 100 are coarse for shortening, higher numbers of 240 and above are fine for finishing natural nails.
Nail matrix
The living tissue at the base of the nail where new nail plate cells are produced. Injury to the matrix permanently alters the nail's growth and shape.
Lunula
The whitish half-moon area at the base of the nail plate. It is the visible portion of the matrix, appearing lighter because cells are not yet fully flattened.
Hyponychium
The skin seal beneath the free edge of the nail plate where it meets the fingertip. It protects the nail bed from bacteria and debris.
Fingernail growth rate
Fingernails grow about 3 mm, or one-eighth inch, per month, faster than toenails. A complete fingernail is replaced in roughly 4 to 6 months.
Onychomycosis
A contagious fungal infection of the nail plate and bed producing thickening, yellow-brown discoloration, and crumbly edges. It is a disease and must be referred, not serviced.
Paronychia
Inflammation or infection of tissue around the nail, causing redness, swelling, and pain. It is a nail disease requiring referral to a physician.
Onycholysis
Painless separation of the nail plate from the nail bed, often from trauma, aggressive filing, or product lifting. The gap traps moisture and can invite infection.
Koilonychia
A non-contagious nail disorder in which the plate is thin and scooped upward like a spoon. It may be associated with systemic conditions.
Oregon Health Licensing Office
The state agency that issues and renews Oregon cosmetology, barbering, esthetics, and nail technology licenses and enforces the rules in OAR Chapter 817.
Booth rent
A business arrangement in which a practitioner pays a fixed weekly or monthly fee to a salon owner for space, keeping all service income and paying self-employment tax.
ORS Chapter 690
The Oregon Revised Statutes chapter governing cosmetology, barbering, esthetics, and nail technology, covering licensing requirements, sanitation standards, and prohibited practices.
Oregon sales tax
Oregon has no state or local general sales tax, so nail services and retail products sold in a salon are not subject to sales tax at the point of sale.

OR Nail Technician study guide

Infection Control, Sanitation and Safety

Infection Control

The chain of infection

Every rule you will be tested on breaks one link in the chain: infectious agent, reservoir, exit route, transmission, entry, susceptible host. Nail service risk is mostly contact transmission - contaminated implements, files, bowls, brushes, and technician hands. Bacteria, viruses, fungi, and parasites all matter, but bloodborne pathogens (HBV, HCV, HIV) drive the glove and sharps rules.

Vocabulary questions turn on

Sanitation reduces contaminants to a safe level on surfaces and tools you cannot disinfect. Disinfection destroys most pathogenic organisms on nonporous implements but not bacterial spores. Sterilization destroys all microbial life including spores and is not a routine salon process. Only an EPA-registered hospital-grade disinfectant, mixed at the label dilution and left for the full label contact time, counts as disinfection. Reusable nonporous implements get immersion; large surfaces get spray or wipe.

Standard precautions

Treat every client as potentially infectious. Wash hands before and after each client, wear gloves when blood, body fluids, or broken skin are likely, and never reuse single-use items - paper files, buffers, wooden sticks, foam separators, liners. If a cut occurs: stop, glove, clean the wound, disinfect the station, and dispose of contaminated material in a closed container.

Traps

  • "UV cabinets disinfect" - they are storage, not disinfection.
  • "Disinfect, then scrub" - organic debris shields microbes; clean and dry first.
  • "A quick dip is enough" - contact time is the rule.
  • "Disinfectant kills spores" - only sterilization does.

Rule of thumb

Clean → disinfect for the full label contact time → store covered. If you cannot state the contact time for the product on your station, you are not using it correctly.

Sanitation and Safety

Two jobs in one domain

Sanitation questions are about microbes; safety questions are about injury, fire, electricity, and chemicals. Read the stem to see which one is being asked.

Chemical safety

Keep every product in its original labeled container or a properly labeled secondary container. Never transfer product into a beverage bottle or an unlabeled spray bottle. Read the Safety Data Sheet (SDS) before first use for first aid, flammability, and required PPE. Store monomer and other flammables closed, away from heat and ignition, and ventilate the area; keep lids on to limit vapor exposure. No eating, drinking, or smoking in the service area, and never store food beside products.

Electrical and physical safety

Inspect cords, use GFCI protection near water, keep water away from electrical equipment, and unplug before cleaning. Support ergonomics: adjust chair and table height, avoid prolonged wrist flexion and pinch grips, use sharp implements so you push rather than force, and take micro-breaks between clients.

Fire, spills, waste

Know the extinguisher rating for the materials present and know the exit. Clean a spill from the outside in, ventilate, and place waste in a closed container. Sharps go into a rigid sharps container, never the trash.

Traps

"Label the spray bottle later" - that is an exposure and a violation. "A little product in a water bottle is fine" - never. "The SDS is only for the owner" - every worker must be able to access hazard information.

Rule of thumb

If a container has no label, it is either a violation or an exposure - label it or discard it before the next client sits down.

Nail Care Services and Procedures

The service sequence

Consultation → hand washing → set out disinfected implements → prepare the nail → perform the service → massage if included → client checkout → clean and disinfect the station → record. Questions love the order. Implements come out of disinfection before the client, never after.

Filing and shaping

File the natural nail in one direction, corner toward center. Sawing back and forth builds heat and splits layers. Match grit to the job: coarse for shortening artificial nails, fine for natural nail finishing. Never file deeply into the sidewalls or thin the free edge.

Cuticle work

The cuticle and eponychium are living tissue - do not cut them. Use a gentle pusher to move back dead tissue only, with client permission. Nippers are for hangnails and tags, used flat, never for digging into the fold.

Product application

Acrylic: correct monomer-to-polymer ratio, thin at cuticle and sidewalls, let it set before filing. Gel: thin base, full cure, cap the free edge. Do not mix product lines unless the manufacturer allows it. Tips and wraps must be sized and blended, not forced.

Pedicure

Use a single-use liner or a hospital-grade disinfected basin, and disinfect basin and jets per manufacturer between clients. Test water temperature. Avoid aggressive credo blades and rasps; stop for redness, cuts, or swelling.

Traps

"Cut the cuticle for a clean look" - no. "Back-and-forth filing is fine" - no. "Massage is optional, so skip the contraindication check" - massage has its own contraindications.

Rule of thumb

If it absorbs liquid, it is single-use. If it is rigid and nonporous, it is clean-then-disinfect.

Anatomy, Physiology and Nail Disorders

Structure

Nail plate (keratin, no nerves or blood vessels), nail bed, matrix (where growth is produced - injury here shows as a lasting groove), lunula (visible portion of the matrix), eponychium and cuticle (the seal at the base), hyponychium (seal at the free edge), nail folds and grooves, free edge. Beneath the plate, the bed's dermis carries blood vessels and nerves. Around the hand: phalanges, tendons, and the median, ulnar, and radial nerve and blood supply.

Growth

Fingernails grow about 0.1 mm per day, roughly 3 mm (1/8 inch) per month, so full replacement takes about four to six months. Toenails are far slower, nine to twelve months. Growth slows with age, poor circulation, illness, and cold.

Conditions versus disorders

A condition is a variation you can work around or note. A disorder requires medical referral, and you may not diagnose or treat. Refer for yellow-brown or green-black discoloration, separation (onycholysis), swelling, redness, pain, pus, dark streaks (melanonychia), pitting, or severe thickening.

Terms to recognize

Onychomycosis (fungal), paronychia (bacterial fold infection), onycholysis (separation), onychorrhexis (splitting), onychauxis (thickening), leukonychia (white spots), koilonychia (spoon nail), pterygium (forward-growing fold tissue), hematoma (blood under the plate).

Traps

"Cuticle and eponychium are the same" - the cuticle is the thin layer; the eponychium is the fold. "The matrix is the white half-moon" - that is the lunula. "You can treat fungus with antiseptic and continue" - refer.

Rule of thumb

If it hurts, is hot or swollen, oozes, or changes color and thickness, stop the service and refer.

Oregon Laws, Rules and Salon Business Practices

The legal frame

Oregon cosmetology is governed by ORS 690 and the administrative rules in OAR chapter 817, administered by the Oregon Health Licensing Office with the Board of Cosmetology. Know the difference: statutes are the law, rules are the operating detail. Both change, so verify current hour counts, fees, renewal dates, and record-retention periods in the current rule text rather than trusting a memorized number from a study sheet.

Licensure and scope

Practice only within your license. A nail technician performs nail care - not diagnosis or treatment of disease, and not cutting living tissue. Keep the license current, follow display requirements, and work only in a licensed facility or under off-site arrangements the Office specifically allows. Do not assume a private home or a client's kitchen is permissible.

Records and client care

Record the service performed, products used, and any reaction or referral. Obtain consent for minors as the rule requires, and document refusals of service.

Business practices

Know your business structure and whether you are an employee, booth renter, or independent contractor - taxes and insurance differ for each. Carry professional liability insurance, put prices, deposits, and cancellation terms in writing, keep product and service revenue records, and understand that salon policy is not law: a salon may be stricter than the rule, never looser.

Traps

Quoting a renewal date or hour requirement from an outdated rulebook; treating a house rule as legal authority; advertising a service outside your license; assuming independent-contractor status by label alone.

Rule of thumb

When a question asks what is legal, reason from public protection, sanitation, and scope of practice - then confirm any specific number in the current OAR chapter 817.

OR Nail Technician cheat sheet

Quick reference

Infection Control

  • Pathogen classes are bacteria, viruses, fungi, and parasites; only pathogens cause disease, while nonpathogens are harmless or beneficial.

  • Bacterial shapes: cocci (round), bacilli (rod), spirilla (spiral); flagella and cilia provide movement; some bacilli form spores that resist ordinary disinfectants.

  • Viruses cannot reproduce without a host cell; hepatitis B, hepatitis C, and HIV are bloodborne, while herpes simplex and HPV spread mainly by direct skin contact.

  • Fungal infections such as tinea pedis and onychomycosis thrive in warm, moist environments; parasites seen in salons include pediculosis and scabies.

  • Universal (standard) precautions decision rule: treat every client's blood and body fluids as infectious, so barriers are used for every service regardless of known health status.

  • Handwashing protocol: soap plus running water plus friction for at least 20 seconds; required before and after each client, after restroom use, and before eating; sanitizer does not replace washing when hands are visibly soiled.

  • Decontamination level rule: cleaning removes debris, sanitation reduces microorganisms, disinfection kills most microorganisms on nonporous surfaces, sterilization destroys all microorganisms including spores.

  • Implements that contact skin or the nail plate must be cleaned, rinsed, dried, then fully immersed in an EPA-registered hospital-grade disinfectant for the label's stated contact time (typically 10-20 minutes).

  • Disinfectant must be mixed to label dilution, kept covered, changed at the manufacturer's interval or when cloudy or visibly soiled, and tested with strips if the label requires it.

Quick reference

Sanitation and Safety

  • A disinfectant is acceptable for bloodborne pathogen control only if its label carries an EPA registration number and a hospital-grade or tuberculocidal claim.

  • Porous materials (wood, foam, cotton, towels, emery boards, most files and buffers) absorb liquids and cannot be disinfected, so they are single-use and discarded after one client.

  • Blood spill sequence: stop the service, don gloves, absorb with a disposable towel, clean with soap and water, disinfect with an EPA-registered product or a 1:10 bleach-to-water solution, double-bag waste, then wash hands.

  • Chemical storage rule: keep products in original labeled containers, capped, away from heat and light, never in food or beverage containers, with the Safety Data Sheet on file and accessible.

  • Ventilation rule: monomer, primer, and solvent vapors are respiratory irritants, so services are performed with local exhaust or in a well-ventilated area and containers are kept closed when not in use.

  • Electrical safety rule: ground-fault circuit interrupter outlets are required near sinks and water, cords are never run across walkways, and equipment is unplugged by the plug rather than the cord.

  • Ergonomic rule: set table and chair height so wrists stay neutral, feet are flat, and work is brought close to the body; alternate tasks to break up static postures.

  • Waste rule: single-use items and contaminated materials go into a closed, lined container; any sharp item goes into a rigid, puncture-resistant sharps container.

  • Slip-and-fall rule: spills are wiped immediately, floors kept dry, and a wet-floor sign posted while any area is being cleaned.

Quick reference

Nail Care Services and Procedures

  • Grit numbers run inverse to coarseness: about 100 grit shortens length, 180 shapes, and 240 or higher finishes and smooths the natural nail plate.

  • Filing rule for natural nails: use light pressure and file from sidewall toward the center of the free edge to reduce splitting and peeling at the corners.

  • Plate preparation rule: remove surface oils with cleanser or dehydrator and avoid over-thinning the plate, since a thinned plate causes sensitivity, lifting, and product breakdown.

  • Polish sequence is base coat, then two thin color coats, then top coat; thin layers reduce bubbling, drying time, and shrinkage.

  • Acrylic mixing rule: a properly formed medium bead uses roughly one part liquid monomer to one and a half parts powder polymer; too wet produces shrinkage and weakness, too dry produces brittleness.

  • Removal rule: file through the top surface, soak in acetone 10-15 minutes for acrylic and soft gel, then gently push off softened product; product is never forced or pried from the plate.

  • Curing rule: gel enhancements are applied in thin layers and cured under a UV or LED lamp matched to the product; thick layers cause heat spikes and under-curing.

  • Pedicure rule: soak 5-10 minutes, use single-use or disinfected bowl liners, exfoliate, and massage from the toes toward the ankle and heart, avoiding varicose veins and inflamed tissue.

  • Service decision rule: a consultation precedes every service, and any open cut, inflammation, or suspected infection stops the service and is referred to a physician.

Quick reference

Anatomy, Physiology and Nail Disorders

  • Nail structures and functions: matrix forms the plate, nail bed supports it, lunula is the visible matrix, cuticle and eponychium seal the base, hyponychium seals under the free edge, sidewalls and nail grooves frame the plate.

  • Growth formula: fingernails grow about 3 mm (1/8 inch) per month, toenails roughly one-third to one-half that rate; a fingernail is fully replaced in 4-6 months, a toenail in 9-12 months.

  • The nail plate has three layers (dorsal, intermediate, ventral), is composed mainly of keratin, and contains no nerves or blood vessels, which is why trimming and filing are painless.

  • Cuticle function is a seal: it blocks microorganisms from entering the space between plate and skin, so cutting living tissue breaks the seal and invites infection.

  • Disease versus disorder rule: nail diseases are infectious or systemic and must be referred (bacterial, fungal, viral); nail disorders are non-contagious structural changes that may be serviced with care.

  • Onychomycosis presents as thickened, yellow-brown, crumbly nail plate and is contagious; paronychia is red, swollen, painful tissue around the nail; both require referral.

  • Onychocryptosis is an ingrown nail, onycholysis is lifting of the plate from the bed, onychomadesis is complete separation, onychauxis is thickening, and onychophagy is nail biting.

  • Green-black discoloration under the plate suggests a Pseudomonas bacterial infection; leuconychia (white spots), koilonychia (spooning), and Beau's lines (horizontal depressions) are non-contagious disorders.

Quick reference

Oregon Laws, Rules and Salon Business Practices

  • Oregon cosmetology and nail technology are governed by ORS Chapter 690 and the administrative rules in OAR Chapter 817, administered by the Oregon Health Licensing Office with Board of Cosmetology oversight.

  • Dual licensing rule: the salon facility and every individual practitioner must each hold a current license, and the salon must have a licensed person designated as responsible in charge.

  • License posting rule: a current license must be posted or available for inspection at the work location, and practicing on an expired or lapsed license is a violation.

  • Sanitation rule in Oregon salons: a dedicated hand-washing sink with hot and cold running water, soap, and single-use towels is required, and reusable implements must be cleaned and disinfected between clients.

  • Independent contractor rule: a booth renter must hold their own license, is not an employee, keeps their own income records, and pays self-employment tax on earnings.

  • Business math rule: net income equals service and retail revenue minus product costs, rent or commission, insurance, and taxes; commission splits and booth rent are the two common compensation models.

  • Oregon has no state or local general sales tax, so nail services and retail products are not subject to sales tax at the point of sale.

  • Chemical safety rule: a Safety Data Sheet must be available for every product in the salon, and workers must be trained on hazards under OSHA Hazard Communication requirements.

OR Nail Technician key terms

Pathogen

Any microorganism, such as a bacterium, virus, or fungus, that can cause disease in humans. In the salon, pathogens are the reason hands and implements must be cleaned and disinfected between clients.

Related: Bloodborne pathogens, Cross-contamination
Bloodborne pathogens

Viruses and bacteria carried in blood and other body fluids that can infect another person through broken skin or mucous membranes. Examples include hepatitis B and HIV, so standard precautions are required.

Related: Standard precautions, Pathogen
Standard precautions

Infection-control practices applied to every client, whether or not they appear healthy. They include hand washing, gloves, eye protection, and proper handling and disinfection of contaminated implements and linens.

Related: Personal protective equipment (PPE), Bloodborne pathogens
Disinfection

A process that uses chemical products to destroy most harmful microorganisms on hard, nonporous surfaces and implements. It does not kill all bacterial spores, so it ranks below sterilization.

Related: Sterilization, EPA-registered hospital disinfectant
Sterilization

The complete destruction of all microbial life, including bacterial spores, on an implement. It requires heat, steam, or chemical sterilants and is used for items that cut or penetrate the skin.

Related: Autoclave, Disinfection
Cross-contamination

The transfer of bacteria, viruses, or fungi from one person, surface, or object to another. Dirty implements, shared product containers, or touching clean items with contaminated gloves cause it.

Related: Cleaning (sanitation), Pathogen
Personal protective equipment (PPE)

Gear worn to protect the technician from contact with blood, body fluids, and chemicals. In a nail salon this usually means disposable gloves, safety glasses or goggles, and a mask when dust or vapors are present.

Related: Standard precautions, Cross-contamination
Antiseptic

A product formulated for use on skin to reduce the number of microorganisms. It is applied to hands or minor cuts but is never a substitute for disinfecting implements or work surfaces.

Related: Cleaning (sanitation), Standard precautions
Cleaning (sanitation)

Using soap, water, and friction to physically remove visible dirt, oil, and debris from a surface or implement. Cleaning must come before disinfection because soil can block the disinfectant from reaching microorganisms.

Related: Disinfection, Single-use (disposable) implement
EPA-registered hospital disinfectant

A chemical product approved by the U.S. Environmental Protection Agency for health-care settings, with a label listing the organisms it kills. Nail salons must use one that is also labeled tuberculocidal.

Related: Disinfection, Safety Data Sheet (SDS)
Safety Data Sheet (SDS)

A standardized document from the manufacturer listing a product's chemical hazards, safe handling, first-aid measures, and storage requirements. Salons must keep one available for every chemical product in use.

Related: Allergic contact dermatitis, EPA-registered hospital disinfectant
Autoclave

A device that uses pressurized steam and high heat to sterilize metal implements and other heat-tolerant items. Correct loading, cycle time, and routine spore testing are needed for it to work.

Related: Sterilization
Single-use (disposable) implement

An item such as a nail file, buffer, or wooden pusher used on one client and then thrown away. It is never disinfected and reused because its porous surface cannot be reliably cleaned.

Related: Cleaning (sanitation), Cross-contamination
Ergonomics

The practice of arranging workstations, tools, and body positions to reduce physical strain. Good ergonomics helps prevent carpal tunnel symptoms, neck and shoulder pain, and long-term injury in nail technicians.

Allergic contact dermatitis

A red, itchy, sometimes blistered skin reaction that appears after repeated contact with a substance the person has become sensitized to, such as acrylic monomer. It usually requires medical care and stopping exposure.

Related: Safety Data Sheet (SDS), Standard precautions
Manicure

A cosmetic service for the hands that includes shaping the natural nails, caring for the surrounding skin, and applying polish or a treatment product. Basic manicures do not involve artificial nail enhancements.

Related: Pedicure, Base coat
Pedicure

A cosmetic service for the feet and toenails that includes soaking, exfoliating, shaping the nails, caring for the skin, and polishing. Salon footbaths must be cleaned and disinfected between clients.

Related: Manicure, Disinfection
Base coat

A thin layer of product applied to the natural nail before polish or gel color. It improves adhesion, helps prevent staining of the nail plate, and can smooth out ridges.

Related: Top coat, Manicure
Top coat

The final layer applied over polish or color to seal it, add shine, and help the manicure resist chipping. Some top coats must be cured under a UV or LED lamp.

Related: Base coat, Gel polish
Nail primer

A liquid applied to the natural nail plate before an acrylic or gel enhancement to improve adhesion. Primer is not the same as a base coat and must be used according to manufacturer instructions.

Related: Nail dehydrator, Sculpted nail (acrylic)
Nail dehydrator

A solution applied to the natural nail before an enhancement to remove surface moisture and oil so the product bonds better. It evaporates quickly and is used sparingly.

Related: Nail primer, Sculpted nail (acrylic)
Sculpted nail (acrylic)

An artificial nail built by mixing a liquid monomer with a powder polymer and shaping the resulting bead on the natural nail or a form. It is strong and can be formed to a chosen length and shape.

Related: Nail primer, Nail abrasive grit
Gel polish

A long-wearing polish containing photo-initiators that hardens only when cured under a UV or LED lamp. It is removed by soaking rather than with standard polish remover.

Related: Top coat, Base coat
Nail abrasive grit

A number describing how coarse an emery board, file, or buffer is, where lower numbers cut faster and higher numbers are finer. Grit choice affects how much natural nail is removed.

Related: Sculpted nail (acrylic)
Nail matrix

The living tissue at the base of the nail where new nail cells are produced. Damage to the matrix can cause permanent ridges, thinning, or lasting changes in the shape of the nail.

Related: Lunula, Nail bed
Nail bed

The skin layer directly beneath the nail plate that contains blood vessels and nerves. It nourishes the plate and can be injured when tools are pushed too deeply under the free edge.

Related: Nail matrix, Onycholysis
Lunula

The whitish, half-moon-shaped area at the base of the nail plate, made of cells that have not yet fully hardened. It is part of the matrix and should never be scraped or filed.

Related: Nail matrix
Eponychium

The living band of skin at the base of the nail plate that lies over the matrix. It is often mistakenly called the cuticle and should be treated gently, never cut deeply.

Related: Cuticle (true cuticle)
Hyponychium

The seal of skin between the free edge of the nail plate and the fingertip. It keeps dirt and microorganisms from getting under the nail and can be damaged by aggressive cleaning.

Related: Nail bed
Cuticle (true cuticle)

The thin, nonliving layer of skin attached to the nail plate that grows forward from the eponychium. It seals the nail base and is softened and gently pushed back, not cut away entirely.

Related: Eponychium, Paronychia
Onychomycosis

A fungal infection of the nail that causes thickening, discoloration, and crumbling of the plate. It is contagious and is treated by a physician, not through cosmetic nail services.

Related: Onycholysis, Paronychia
Paronychia

Inflammation or infection of the skin around the nail, causing redness, swelling, and sometimes pus. It often follows torn cuticles or hangnails and should be referred to a doctor.

Related: Cuticle (true cuticle), Onychomycosis
Onycholysis

The separation of the nail plate from the nail bed, leaving a whitish or hollow area usually starting at the free edge. It can result from trauma, aggressive filing, or infection.

Related: Nail bed, Onychomycosis
Pterygium (nail)

A growth of living skin that attaches to and pulls on the nail plate, often after repeated trauma or inflammation. It should never be cut or forced back during a manicure.

Related: Cuticle (true cuticle)
Oregon Health Licensing Office (HLO)

The state agency that licenses and regulates nail technicians, estheticians, barbers, and related professionals in Oregon. It enforces the administrative rules covering licensing, sanitation, and salon operation.

Related: Oregon Administrative Rules (OAR), Scope of practice
Oregon Administrative Rules (OAR)

The detailed regulations adopted by state agencies to carry out Oregon law. The chapters covering nail technology set requirements for licensing, sanitation practices, and the services a licensee may perform.

Related: Oregon Health Licensing Office (HLO)
Scope of practice

The set of services and procedures a licensed nail technician is legally permitted to perform. Working outside it, such as treating a nail disease, can lead to discipline by the licensing agency.

Related: Oregon Administrative Rules (OAR), Client record
Client record

A written or electronic note kept for each client listing services performed, products used, and any reactions or conditions observed. Good records support safety follow-up and help answer complaints.

Related: Scope of practice, Allergic contact dermatitis
Independent contractor

A self-employed professional who rents space or pays a fee to work in a salon and controls their own schedule, pricing, and clients. Tax and liability responsibilities fall on the contractor.

Related: Liability insurance
Liability insurance

A policy that helps pay for claims when a client is injured or property is damaged because of the technician's services. Many nail professionals carry it in addition to any salon coverage.

Related: Independent contractor

OR Nail Technician study plan

8 weeks · About 6 hours per week

Week 1

Infection Control, Sanitation and Safety

  • Define the classes of pathogens (bacteria, viruses, fungi, parasites) and give one salon-relevant example of each

  • Diagram and explain each link in the chain of infection and name a break point for every link

  • Differentiate cleaning, sanitizing, disinfection and sterilization, and state which level applies to implements, linens, and surfaces

  • Identify where to locate and how to interpret Safety Data Sheets and product label directions for salon chemicals

Your checkpoint

One-page hand-drawn chain-of-infection diagram with break points, plus a 40-item self-quiz scored at 90% or higher

Week 2

Infection Control, Sanitation and Safety & Anatomy, Physiology and Nail Disorders

  • Sequence the steps of a complete implement disinfection cycle, from use to storage

  • Distinguish single-use from reusable items and state the disposal rule for each

  • Label the structures of the natural nail unit and describe the function of each

  • List the bones and muscles of the lower arm, wrist and hand that affect nail service safety

Your checkpoint

A mock salon inspection checklist applied to your own workstation, corrected to 100% compliance, plus a fully labeled nail-unit and hand/arm anatomy diagram

Week 3

Anatomy, Physiology and Nail Disorders

  • Differentiate nail disorders from nail diseases and identify which require medical referral

  • Compare the signs of fungal, bacterial and viral nail infections

  • Describe common skin conditions of the hands and feet and state the service response to each

  • Explain how systemic conditions and medications can alter nail growth and appearance

Your checkpoint

A 30-condition reference table listing distinguishing features, contagious status, and whether to serve or refer, with zero referral errors

Week 4

Nail Care Services and Procedures

  • Write out the full step-by-step procedure for a basic manicure and a basic pedicure, including sanitation checkpoints

  • Describe the correct application, fill and removal process for acrylics and wraps

  • Outline hand and foot massage movements in the correct sequence and identify contraindicated areas

  • Match each service to its appropriate supplies, implements and time allotment

Your checkpoint

Timed written procedure sheets for three services with sanitation checkpoints embedded, verified against a self-graded rubric

Week 5

Nail Care Services and Procedures & Oregon Laws, Rules and Salon Business Practices

  • Conduct a client consultation script that screens for contraindications before service begins

  • Cross-reference each step of your manicure and pedicure procedures against the state sanitation rules

  • Describe the correct response to a client with a suspected infection or an open wound

  • Explain informed consent and client recordkeeping in the context of services performed

Your checkpoint

A one-page crosswalk mapping every service step to the specific rule it satisfies, with gaps flagged and fixed

Week 6

Oregon Laws, Rules and Salon Business Practices

  • Summarize licensing requirements, license renewal and continuing education obligations

  • State the scope of practice for a nail technician and identify tasks that must be referred out

  • Explain salon sanitation, inspection and recordkeeping requirements

  • Describe basic business practices relevant to a booth renter or salon owner, including record retention and tax obligations

Your checkpoint

A 60-question practice exam on laws and rules, scored at 85% or higher, with every missed item rewritten as a rule statement

Week 7

Infection Control, Sanitation and Safety & Nail Care Services and Procedures

  • Re-drill the sanitation and service topics missed on prior quizzes until each is answered correctly twice

  • Rehearse the full disinfection-to-service workflow from memory without notes

  • Compare the two most commonly confused disinfection levels and two commonly confused nail disorders

  • Build and answer flashcards for every term flagged as unfamiliar in weeks 1 through 6

Your checkpoint

A written error log of at least 25 previously missed items, each with the correct answer and reason, plus a retake of the week 1 and week 6 quizzes at 95% or higher

Week 8

Infection Control, Sanitation and Safety & Nail Care Services and Procedures & Anatomy, Physiology and Nail Disorders & Oregon Laws, Rules and Salon Business Practices

  • Complete two full-length timed practice exams covering all four domains

  • Review every missed item and classify it by domain to confirm no domain falls below 80%

  • Recite the key Oregon rule numbers and licensing facts from memory

  • Finalize a one-page summary sheet for each domain to review the morning of the exam

Your checkpoint

Two timed 100-question exams each scored at 85% or higher, plus four completed one-page domain summary sheets

Milestones

Week 2: Score 90% or higher on the infection-control quiz and pass the self-applied mock inspection checklist with zero sanitation violations

Week 4: Score 85% or higher on a 30-item anatomy and nail-disorder quiz, with all contagious conditions correctly routed to referral

Week 6: Score 85% or higher on the 60-question laws and rules exam

Week 8: Score 85% or higher on both full-length practice exams with no single domain below 80%

OR Nail Technician exam day

Your checklist

Government-issued photo ID

Bring an unexpired ID with a name that exactly matches your exam registration. If your name changed, bring the supporting document (marriage certificate, court order) and confirm the accepted ID list with the provider ahead of time.

Admission letter / appointment confirmation

Print or save the confirmation email or scheduling notice showing your test date, time, and location. Confirm with the provider whether a printed copy is required or a digital copy is acceptable.

Model or client (if required)

Some practical exams for nail technology require you to bring a live model who meets eligibility rules (age, ID, consent form, no assisting). Confirm with the provider whether a model is required, whether the model needs their own ID, and whether a model fee applies.

Full kit of implements and supplies per the provider's supply list

Pack nippers, cuticle pusher, files, buffers, nail brush, orangewood sticks, polish and polish remover, lotion, towels, and any product kit specified. Build your kit directly from the official supply list you receive at scheduling, not from memory or a classmate's list.

Sanitation and disinfection supplies

Bring disinfection container with appropriate solution, clean and dirty implement containers, hand sanitizer, gloves, disposable trash bags, and paper towels. Label containers clearly so examiners can see your sanitation sequence.

Watch or small timer

A basic timer helps you pace services without relying on a phone. Confirm with the provider whether wristwatches are permitted and whether phones must be powered off and stored.

Comfortable, professional clothing and closed-toe shoes

Wear something you can work in for several hours and that lets you move around a table and wash hands easily. Avoid loose sleeves and dangling jewelry that could interfere with sanitation or safety checks.

Water, a light snack, and any needed medication

Practical exams can run long with limited breaks. Confirm with the provider what food and drink are allowed in the testing area and where personal items must be stored.

Practice your written service sequence and sanitation steps to automaticity

Rehearse the order of each required service and the sanitation steps between them, because the practical is scored on observable steps performed in sequence, not just the finished look.

Re-read the official candidate handbook the week of the exam

Rules on timing, dress, model eligibility, prohibited items, and scoring weights change and vary by provider. The handbook and your scheduling notice are the controlling documents.

Plan the day

72 hours before the test

Re-read the official candidate handbook and supply list. Lay out every implement and supply on a table and check it against the list line by line. Replace anything broken, dull, or missing and confirm your disinfection solution is not expired.

72 hours before the test

Do at least two full timed run-throughs of every required service on a practice hand or model, including the disinfecting and setup steps before and after each one. Note where you lose time.

72 hours before the test

Confirm logistics: exact address, parking, arrival time, and how long the check-in process takes. Confirm with the provider if you have any question about model requirements or what counts as an acceptable ID.

24 hours before the test

Pack your kit completely and close it. Put your ID, confirmation notice, and any model paperwork in the same bag. Do not plan to add supplies in the morning.

24 hours before the test

Confirm your model knows the arrival time, location, and ID requirement, and has arranged transportation. Have a backup contact in case your model cancels.

24 hours before the test

Eat a normal dinner, set two alarms, and get a full night of sleep. Avoid last-minute cramming of brand-new techniques you have not practiced.

Morning of the test

Eat a real breakfast, dress in your planned clothing, and leave earlier than the map estimate allows for traffic, parking, and check-in.

Morning of the test

Re-check that your ID, confirmation notice, model paperwork, and full kit are in the car before you drive away.

At check-in

Present your ID and paperwork, listen to the orientation, and ask the examiner any clarifying question before the timer starts rather than during a service.

During the test

Set up your station and sanitation containers first, then work in the order you practiced. Narrate nothing extra; perform each step so the examiner can clearly observe it.

During the test

Watch your clock at natural transition points, not constantly. If you fall behind on one service, finish it correctly rather than rushing and skipping scored steps.

During the test

Sanitize your hands and implements at every transition, keep clean and dirty items separated, and keep your station free of clutter so nothing reads as a sanitation violation.

After the test

Follow the examiner's instructions for packing up and leaving. Do not linger in the testing area or discuss specific tasks with other candidates.

Rules to check

  • Bring an unexpired government-issued photo ID with a name matching your registration exactly; candidates without acceptable ID are typically turned away, so confirm the accepted forms with the provider in advance.

  • Arrive at the check-in time stated in your scheduling notice, not the start time of the test. Late arrivals may be denied entry; confirm the provider's late-arrival policy before test day.

  • Phones, smartwatches, and other electronic devices generally must be powered off and stored out of the work area. Confirm with the provider what, if anything, may be kept at your station.

  • Follow the examiner's directions exactly and perform only the services on the assigned task list. Do not ask examiners to evaluate technique or give feedback during the test.

  • Breaks are usually limited to what the provider specifies. Ask before the test begins how to request a restroom break and whether the clock stops; do not leave the testing area without permission.

  • Your model, if one is required, must meet the provider's eligibility rules and generally may not assist, prompt, or coach you during the test. Confirm model rules, including any restrictions on who may serve as a model.

  • Scoring is based on observable performance of required steps, including sanitation and safety, not only the appearance of the finished nails. A skipped sanitation step can cost points even when the finished work looks correct.

  • Do not record, photograph, or share exam content. Candidate conduct rules and consequences for misconduct are set by the provider; confirm them in the candidate handbook.

OR Nail Technician FAQ

How many OR Nail Technician practice questions are available?

The practice set has 200 OR Nail Technician questions. Each one includes the choices, the correct answer, and an explanation, and the set is free to read with no signup.

How many OR Nail Technician flashcards are available?

The flashcard set has 32 OR Nail Technician cards. Each card shows the term and its definition.

Which topics does the OR Nail Technician study material cover?

The OR Nail Technician study material has 4 sections, including Infection Control, Sanitation and Safety, Nail Care Services and Procedures, and Anatomy, Physiology and Nail Disorders.

What format facts does the catalog list for the OR Nail Technician exam?

The catalog lists these item types: multiple choice for the OR Nail Technician exam.