NY Regents Physics overview

  • 200 practice questions
  • 32 flashcards
  • 5 study guide topics
  • 39 key terms

What you'll study

  • Mechanics20%
  • Energy20%
  • Electricity and Magnetism20%
  • Waves20%
  • Modern Physics20%

The Physical Setting/Physics Regents Examination is a New York State Regents examination in physics, administered by the New York State Education Department as part of its high school Regents examination program. It is intended for high school students who have completed a course in physics aligned to the State's physical setting standards, and the results are used toward Regents diploma requirements. The exam samples the major content strands of introductory physics: mechanics, energy, electricity and magnetism, waves, and modern physics. NYSED's public pages list Regents Exams under Assessments and provide exam schedules, but the specific physics page was not reachable when this summary was compiled, so details such as item counts, time limits, and scoring scales are not stated here. Preparation should center on the New York State physics core content and reference tables, with repeated practice on free-response calculations, graph interpretation, and multi-step problems. This page is an independent study resource and is not affiliated with or endorsed by the New York State Education Department. Candidates should confirm all exam logistics, schedules, and scoring policies directly with NYSED and their school counselor before registering.

Common mistakes

Reporting a vector quantity (velocity, acceleration, force, momentum, displacement) as a bare number with no direction, or giving direction as a vague word like 'backward' without a reference axis.

Students memorize magnitude formulas and treat the sign or angle as decoration; the Reference Tables give magnitude equations, so the direction step feels optional and gets dropped under time pressure.

What to do instead

For every vector answer, force yourself to write two lines: magnitude with units, then direction stated relative to a named axis (e.g., '12 m/s at 30° north of east' or '5 N to the left'). Before solving, draw the axis and label which way is positive.

Using g = 9.81 m/s² and mixing it with values given to two significant figures, or switching between 9.8 and 10 mid-problem, producing answers that disagree with the accepted range.

Students pull g from the Reference Tables (9.81) but the problem's data imply 9.8; inconsistent rounding cascades through multi-step kinematics and projectile work.

What to do instead

Pick one value of g at the start of each problem (use 9.8 m/s² unless told otherwise), write it down, and carry extra digits through intermediate steps, rounding only the final answer to the significant figures of the given data.

Treating the top of a projectile's path as a point where velocity is zero, or assuming horizontal and vertical motions share the same time only 'sometimes'.

Everyday intuition says a ball 'stops' at its peak; students conflate vertical velocity (zero at apex) with total velocity (equal to the constant horizontal component there).

What to do instead

Split every projectile into independent x (constant velocity) and y (constant acceleration) columns. State explicitly: at the apex v_y = 0 but v_x is unchanged; the single flight time t links both columns. Practice labeling v_x and v_y at launch, apex, and landing.

Setting up Newton's second law on the wrong object or omitting a force from the free-body diagram, especially normal force, friction direction, or the force one surface exerts on another in a two-body problem.

Students draw the diagram from memory of similar problems rather than from the physical situation, and they forget that friction opposes relative motion, not necessarily the applied force.

What to do instead

Always draw the free-body diagram first with one object isolated, name each force and its source, then write ΣF = ma along chosen axes. For connected bodies, draw a separate diagram for each mass and use the same magnitude of tension/contact force.

Confusing conservation of mechanical energy with conservation of momentum, or applying energy conservation when friction is present without accounting for the energy dissipated.

Both are 'conservation' laws with similar-looking equations, and students default to whichever they saw last; they also forget that mechanical energy is only conserved in the absence of non-conservative work.

What to do instead

Before choosing a law, ask: is the system isolated (momentum) and are there non-conservative forces (energy)? Write the full work-energy statement ΔKE + ΔPE = W_nonconservative and only set the right side to zero when friction and applied forces are absent.

Mixing up series and parallel rules for current, voltage, and equivalent resistance, e.g., adding resistances in parallel directly or claiming current is the same through parallel branches.

The reciprocal formula for parallel resistance looks unlike the series sum, and students memorize 'current is constant' from series circuits and overgeneralize it.

What to do instead

Anchor on physics, not formulas: in series there is one path so current is common and voltages add; in parallel there are multiple paths so voltage is common and currents add. For parallel, compute 1/R_eq = Σ1/R_i and sanity-check that R_eq is smaller than the smallest branch.

Reversing the direction of induced current or magnetic force by mishandling a right-hand rule, or forgetting that the force on a moving charge is perpendicular to both velocity and field.

Multiple right-hand rules (force on charge, field around a wire, induced current) get blended, and students apply them to the wrong finger or hand.

What to do instead

Write the rule you are using next to the diagram every time (e.g., 'F = qv×B: fingers along v, curl to B, thumb gives F for positive charge; reverse for negative'). Do a quick 90° check: the force must be perpendicular to the velocity.

Treating wave speed, frequency, and wavelength as if changing one medium property changes all three, or believing frequency changes when a wave enters a new medium.

The equation v = fλ has three variables, and students assume any change propagates to all of them; they forget frequency is set by the source.

What to do instead

State the invariant first: frequency is fixed by the source and does not change across a boundary; speed is set by the medium, so wavelength adjusts (λ = v/f). Use this to predict refraction direction and to check answers.

Misreading ray diagrams or applying the mirror/lens equation with wrong sign conventions, then reporting a virtual image as real (or vice versa).

Sign conventions differ between mirror and lens setups and are rarely drilled; students plug numbers without tracking whether image distance is positive or negative.

What to do instead

Write the sign convention at the top of the problem (for a single converging lens: f positive, real object distance positive, negative image distance means virtual upright image). Confirm with a quick sketch: virtual images form on the same side as the object for lenses and are always upright.

Mishandling photon-energy and photoelectric problems by using wavelength in nanometers directly in E = hc/λ, or ignoring the work function threshold when deciding whether emission occurs.

Unit conversion (nm to m) is skipped under time pressure, and students compute photon energy but never compare it to the work function to check if electrons are actually ejected.

What to do instead

Convert wavelength to meters before substituting, and always write the photoelectric condition: emission occurs only if hf ≥ φ; the maximum kinetic energy is K = hf − φ. State both the threshold check and the K value in the answer.

Exam requirements can change. Confirm current details with the exam provider.

NY Regents Physics practice

200 questions. Each one lists the choices, the correct answer, and an explanation. With JavaScript, this list opens one question at a time. The checker at the top of this page saves progress in this browser when it is available.

  1. Question 1Mechanics

    A car travels 120 meters in 15 seconds at a constant speed. What is the car's speed?

    1. 105 m/s
    2. 8.0 m/s Correct answer.
    3. 0.13 m/s
    4. 1800 m/s

    Explanation

    Average speed equals total distance divided by total time, so 120 m ÷ 15 s = 8.0 m/s. This is a scalar quantity describing how fast the car moves regardless of direction.

  2. Question 2Mechanics

    Which of the following is a vector quantity?

    1. Distance
    2. Time
    3. Displacement Correct answer.
    4. Speed

    Explanation

    A vector has both magnitude and direction, and displacement qualifies because it describes a change in position with a specified direction. Speed, distance, and time are scalars with magnitude only.

  3. Question 3Mechanics

    An object accelerates uniformly from rest to 20 m/s in 4.0 seconds. What is its acceleration?

    1. 0.20 m/s²
    2. 80 m/s²
    3. 5.0 m/s² Correct answer.
    4. 16 m/s²

    Explanation

    Acceleration is the change in velocity divided by the time interval, so (20 m/s − 0 m/s) ÷ 4.0 s = 5.0 m/s². Uniform acceleration means this rate stays constant throughout the interval.

  4. Question 4Mechanics

    According to Newton's first law, an object in motion continues in a straight line at constant speed unless acted on by a net external force. This property is best described as

    1. Impulse
    2. Momentum
    3. Weight
    4. Inertia Correct answer.

    Explanation

    Inertia is the tendency of an object to resist changes in its state of motion, which is exactly what Newton's first law describes. Mass is the quantitative measure of inertia.

  5. Question 5Mechanics

    A 10-newton force acts on a 2.0-kilogram mass. What is the resulting acceleration?

    1. 5.0 m/s² Correct answer.
    2. 20 m/s²
    3. 0.20 m/s²
    4. 12 m/s²

    Explanation

    Newton's second law states that net force equals mass times acceleration, so acceleration equals force divided by mass: 10 N ÷ 2.0 kg = 5.0 m/s². The direction of acceleration matches the direction of the net force.

  6. Question 6Mechanics

    Two forces act on an object: 6 N to the right and 4 N to the left. What is the magnitude and direction of the net force?

    1. 2 N to the left
    2. 2 N to the right Correct answer.
    3. 10 N to the left
    4. 10 N to the right

    Explanation

    Forces in opposite directions subtract, giving a net force of 6 N − 4 N = 2 N. The net force points in the direction of the larger force, which is to the right.

  7. Question 7Mechanics

    A 5.0-kilogram object rests on a horizontal surface where the coefficient of static friction is 0.40. Using g = 9.8 m/s², what is the maximum static friction force?

    1. 20 N Correct answer.
    2. 2.0 N
    3. 49 N
    4. 0.20 N

    Explanation

    Maximum static friction equals the coefficient of static friction times the normal force, and on a horizontal surface the normal force equals weight: 0.40 × (5.0 kg × 9.8 m/s²) = 0.40 × 49 N ≈ 20 N.

  8. Question 8Mechanics

    A 1500-kilogram car moving at 20 m/s comes to rest in 5.0 seconds. What is the magnitude of the average braking force?

    1. 300 N
    2. 7500 N
    3. 30 N
    4. 6000 N Correct answer.

    Explanation

    First find acceleration: (0 − 20 m/s) ÷ 5.0 s = −4.0 m/s². Then apply Newton's second law: force magnitude = 1500 kg × 4.0 m/s² = 6000 N.

  9. Question 9Mechanics

    A ball is thrown straight up with an initial velocity of 15 m/s. Using g = 9.8 m/s² and ignoring air resistance, how long does it take to reach its highest point?

    1. 1.5 s Correct answer.
    2. 2.0 s
    3. 0.65 s
    4. 4.9 s

    Explanation

    At the highest point the vertical velocity is zero, so using v = v₀ − gt gives 0 = 15 − 9.8t, and t ≈ 1.5 s. Gravity decelerates the ball at 9.8 m/s² throughout the upward trip.

  10. Question 10Mechanics

    A projectile is launched horizontally from a height and follows a curved path. Which statement about its motion is correct?

    1. The horizontal velocity changes while the vertical velocity stays constant.
    2. The horizontal velocity stays constant while the vertical velocity changes. Correct answer.
    3. Both horizontal and vertical velocities change at the same rate.
    4. Both horizontal and vertical velocities remain constant.

    Explanation

    Ignoring air resistance, no horizontal force acts on the projectile, so horizontal velocity is constant. Gravity acts vertically, so the vertical velocity changes at 9.8 m/s² downward.

  11. Question 11Mechanics

    A 2.0-kilogram object moving at 3.0 m/s has what momentum?

    1. 18 kg·m/s
    2. 1.5 kg·m/s
    3. 0.67 kg·m/s
    4. 6.0 kg·m/s Correct answer.

    Explanation

    Momentum equals mass times velocity: 2.0 kg × 3.0 m/s = 6.0 kg·m/s. Momentum is a vector pointing in the direction of the velocity.

  12. Question 12Mechanics

    A 4.0-kilogram cart moving at 3.0 m/s collides with and sticks to a stationary 2.0-kilogram cart. What is their combined velocity after the collision?

    1. 3.0 m/s
    2. 6.0 m/s
    3. 2.0 m/s Correct answer.
    4. 1.0 m/s

    Explanation

    In a perfectly inelastic collision, momentum is conserved: (4.0 kg)(3.0 m/s) + 0 = (6.0 kg)v, so v = 12 ÷ 6.0 = 2.0 m/s. The combined mass after sticking is 6.0 kg.

  13. Question 13Mechanics

    A 0.50-kilogram ball is dropped from rest and reaches a speed of 10 m/s just before hitting the ground. What is its kinetic energy at that moment?

    1. 2.5 J
    2. 5.0 J
    3. 50 J
    4. 25 J Correct answer.

    Explanation

    Kinetic energy equals one-half mass times velocity squared: ½ × 0.50 kg × (10 m/s)² = 0.25 × 100 = 25 J. Energy depends on the square of the speed.

  14. Question 14Mechanics

    A 2.0-kilogram book is lifted 1.5 meters above a table. Using g = 9.8 m/s², what is its increase in gravitational potential energy?

    1. 3.0 J
    2. 0.31 J
    3. 13 J
    4. 29 J Correct answer.

    Explanation

    Gravitational potential energy change equals mass times g times height: 2.0 kg × 9.8 m/s² × 1.5 m ≈ 29 J. This energy is stored due to the book's raised position.

  15. Question 15Mechanics

    A machine does 400 joules of work in 8.0 seconds. What is its power output?

    1. 3200 W
    2. 408 W
    3. 0.020 W
    4. 50 W Correct answer.

    Explanation

    Power is work divided by time: 400 J ÷ 8.0 s = 50 W. Power measures the rate at which energy is transferred or work is done.

  16. Question 16Mechanics

    A box is pushed 5.0 meters across a floor by a 20-newton horizontal force. How much work is done by this force?

    1. 25 J
    2. 4.0 J
    3. 100 J Correct answer.
    4. 0 J

    Explanation

    Work equals force times displacement when the force is parallel to the displacement: 20 N × 5.0 m = 100 J. Work measures energy transferred to the box.

  17. Question 17Mechanics

    A 0.25-kilogram ball moving at 8.0 m/s strikes a wall and rebounds straight back at 6.0 m/s. What is the magnitude of the ball's change in momentum?

    1. 0.50 kg·m/s
    2. 3.5 kg·m/s Correct answer.
    3. 2.0 kg·m/s
    4. 14 kg·m/s

    Explanation

    Taking the initial direction as positive, initial momentum is 0.25 × 8.0 = 2.0 kg·m/s and final momentum is 0.25 × (−6.0) = −1.5 kg·m/s. The change is −1.5 − 2.0 = −3.5 kg·m/s, with magnitude 3.5 kg·m/s.

  18. Question 18Mechanics

    A 3.0-kilogram block slides down a frictionless incline that is 2.0 meters high. Using g = 9.8 m/s², what is its speed at the bottom?

    1. 39 m/s
    2. 6.3 m/s Correct answer.
    3. 19.6 m/s
    4. 4.4 m/s

    Explanation

    By conservation of energy, mgh = ½mv², so v = √(2gh) = √(2 × 9.8 × 2.0) = √39.2 ≈ 6.3 m/s. Mass cancels, so the speed is independent of the block's mass.

  19. Question 19Mechanics

    A 1200-kilogram car rounds a flat curve of radius 50 meters at 15 m/s. What is the magnitude of the centripetal force required?

    1. 5400 N Correct answer.
    2. 240 N
    3. 18000 N
    4. 360 N

    Explanation

    Centripetal force equals mass times velocity squared divided by radius: (1200 kg × (15 m/s)²) ÷ 50 m = (1200 × 225) ÷ 50 = 5400 N. This force points toward the center of the circular path.

  20. Question 20Mechanics

    Two students push a 30-kilogram sled from rest with a combined net force of 60 N over a distance of 4.0 meters on frictionless ice. What is the sled's final kinetic energy?

    1. 0 J
    2. 1800 J
    3. 15 J
    4. 240 J Correct answer.

    Explanation

    The work done by the net force equals the change in kinetic energy: W = Fd = 60 N × 4.0 m = 240 J. Starting from rest, this work becomes the sled's final kinetic energy.

  21. Question 21Mechanics

    A 1.5-kilogram object hangs at rest from a single vertical rope. Using g = 9.8 m/s², what is the tension in the rope?

    1. 6.5 N
    2. 0 N
    3. 1.5 N
    4. 15 N Correct answer.

    Explanation

    Because the object is at rest, the net force is zero, so the upward tension equals the downward weight: T = mg = 1.5 kg × 9.8 m/s² ≈ 15 N.

  22. Question 22Mechanics

    A student measures the period of a pendulum as 2.0 seconds. What is the frequency of the pendulum?

    1. 0.25 Hz
    2. 2.0 Hz
    3. 4.0 Hz
    4. 0.50 Hz Correct answer.

    Explanation

    Frequency is the reciprocal of period: f = 1/T = 1 ÷ 2.0 s = 0.50 Hz. Frequency counts the number of complete oscillations per second.

  23. Question 23Mechanics

    A 0.20-kilogram arrow is shot from a bow with a speed of 30 m/s. What is the arrow's kinetic energy?

    1. 180 J
    2. 3.0 J
    3. 6.0 J
    4. 90 J Correct answer.

    Explanation

    Kinetic energy equals ½mv² = ½ × 0.20 kg × (30 m/s)² = 0.10 × 900 = 90 J. The energy scales with the square of the speed.

  24. Question 24Mechanics

    A 5.0-newton force acts on a 2.0-kilogram object for 3.0 seconds. What is the magnitude of the impulse delivered?

    1. 30 N·s
    2. 1.7 N·s
    3. 6.0 N·s
    4. 15 N·s Correct answer.

    Explanation

    Impulse equals force times the time interval: 5.0 N × 3.0 s = 15 N·s. Impulse also equals the change in momentum of the object.

  25. Question 25Mechanics

    An object moves along a straight line, and its velocity-time graph is a horizontal line above the time axis. Which description of the motion is correct?

    1. The object's acceleration increases steadily.
    2. The object accelerates at a constant nonzero rate.
    3. The object is at rest the entire time.
    4. The object moves with constant velocity and zero acceleration. Correct answer.

    Explanation

    On a velocity-time graph, the slope represents acceleration. A horizontal line has zero slope, so acceleration is zero and velocity stays constant.

  26. Question 26Mechanics

    A car travels 120 meters in 8.0 seconds. What is its average speed?

    1. 8.0 m/s
    2. 12 m/s
    3. 15 m/s Correct answer.
    4. 10 m/s

    Explanation

    Average speed is the total distance traveled divided by the total time taken. Here, 120 m divided by 8.0 s gives 15 m/s.

  27. Question 27Mechanics

    An object is in equilibrium. Which statement must be true about the forces acting on it?

    1. The forces are all equal in magnitude.
    2. The object is at rest.
    3. The net force is zero. Correct answer.
    4. The object is moving at constant velocity.

    Explanation

    Equilibrium means the vector sum of all forces acting on the object is zero. This can occur whether the object is at rest or moving with constant velocity, and the individual forces need not be equal.

  28. Question 28Mechanics

    A ball is thrown straight up with an initial speed of 20 m/s. Ignoring air resistance and using g = 9.8 m/s², what is the acceleration of the ball at the highest point of its path?

    1. 0 m/s²
    2. 9.8 m/s² downward Correct answer.
    3. 20 m/s² downward
    4. 9.8 m/s² upward

    Explanation

    At the highest point, the ball momentarily stops, but gravity still acts on it. The acceleration due to gravity is always 9.8 m/s² downward near Earth's surface, regardless of the ball's velocity.

  29. Question 29Mechanics

    A 10-newton force and a 6.0-newton force act concurrently on an object. Which pair of forces could be the equilibrant that keeps the object at rest?

    1. A 6.0 N force opposite to the 10 N force
    2. A 10 N force opposite to the 6.0 N force
    3. A 4.0 N force opposite to the 6.0 N force Correct answer.
    4. A 16 N force opposite to the 10 N force

    Explanation

    For equilibrium, the vector sum of all forces must be zero. The 10 N and 6.0 N forces in the same direction have a resultant of 16 N, so the equilibrant must be 16 N in the opposite direction. The option stating a 4.0 N force opposite to the 6.0 N force would combine with the 10 N force to give a net of 8.0 N, not zero, so it is incorrect.

  30. Question 30Mechanics

    A 2.0-kilogram object is pushed with a constant net force of 8.0 newtons. What is the acceleration of the object?

    1. 0.25 m/s²
    2. 16 m/s²
    3. 4.0 m/s² Correct answer.
    4. 8.0 m/s²

    Explanation

    According to Newton's second law, acceleration equals net force divided by mass. Here, 8.0 N divided by 2.0 kg gives 4.0 m/s².

  31. Question 31Mechanics

    A 0.50-kilogram cart moving at 2.0 m/s collides with a stationary 1.5-kilogram cart and they stick together. What is the speed of the combined carts immediately after the collision?

    1. 1.0 m/s
    2. 0.67 m/s
    3. 2.0 m/s
    4. 0.50 m/s Correct answer.

    Explanation

    In a perfectly inelastic collision, momentum is conserved. The initial momentum is (0.50 kg)(2.0 m/s) = 1.0 kg·m/s, and the total mass after collision is 2.0 kg, so the final speed is 1.0 kg·m/s ÷ 2.0 kg = 0.50 m/s.

  32. Question 32Mechanics

    A 1.0-kilogram object is lifted vertically at a constant speed of 2.0 m/s for 3.0 seconds. Using g = 9.8 m/s², how much work is done by the lifting force?

    1. 6.0 J
    2. 59 J Correct answer.
    3. 29 J
    4. 20 J

    Explanation

    The lifting force must equal the weight, mg = (1.0 kg)(9.8 m/s²) = 9.8 N, because the object moves at constant speed. The distance lifted is (2.0 m/s)(3.0 s) = 6.0 m, so the work done is (9.8 N)(6.0 m) ≈ 59 J.

  33. Question 33Mechanics

    A 0.20-kilogram ball is thrown vertically upward with 10 joules of kinetic energy. Ignoring air resistance and using g = 9.8 m/s², what maximum height does the ball reach?

    1. 2.0 m
    2. 0.51 m
    3. 10 m
    4. 5.1 m Correct answer.

    Explanation

    At the maximum height, all kinetic energy is converted to gravitational potential energy. Setting mgh = 10 J gives h = 10 J / [(0.20 kg)(9.8 m/s²)] ≈ 5.1 m.

  34. Question 34Mechanics

    A 1500-kilogram car accelerates uniformly from rest to 20 m/s in 10 seconds. What is the average power delivered by the net force during this interval?

    1. 15,000 W
    2. 30,000 W Correct answer.
    3. 3,000 W
    4. 300,000 W

    Explanation

    The work done by the net force equals the change in kinetic energy: (1/2)(1500 kg)(20 m/s)² = 300,000 J. Average power is work divided by time: 300,000 J / 10 s = 30,000 W.

  35. Question 35Mechanics

    A 2.0-kilogram block is pulled across a horizontal floor by a rope that makes a 30° angle above the horizontal with a tension of 10 N. If the block moves 3.0 meters horizontally, how much work is done by the tension?

    1. 15 J
    2. 30 J
    3. 0 J
    4. 26 J Correct answer.

    Explanation

    Work is the product of the force component in the direction of motion and the displacement. The horizontal component of the tension is (10 N) cos 30° ≈ 8.66 N, so the work is (8.66 N)(3.0 m) ≈ 26 J.

  36. Question 36Mechanics

    A 0.50-kilogram ball moving horizontally at 4.0 m/s strikes a wall and bounces back horizontally at 3.0 m/s. What is the magnitude of the impulse delivered to the ball by the wall?

    1. 1.5 kg·m/s
    2. 3.5 kg·m/s Correct answer.
    3. 0.50 kg·m/s
    4. 2.0 kg·m/s

    Explanation

    Impulse equals the change in momentum. Taking the initial direction as positive, the initial momentum is (0.50 kg)(4.0 m/s) = 2.0 kg·m/s and the final momentum is (0.50 kg)(−3.0 m/s) = −1.5 kg·m/s. The change is −1.5 − 2.0 = −3.5 kg·m/s, so the magnitude is 3.5 kg·m/s.

  37. Question 37Mechanics

    A 1200-kilogram car rounds a flat curve of radius 50 meters at a constant speed of 15 m/s. What is the magnitude of the centripetal acceleration of the car?

    1. 4.5 m/s² Correct answer.
    2. 3.0 m/s²
    3. 0.22 m/s²
    4. 0.30 m/s²

    Explanation

    Centripetal acceleration is given by a = v²/r. Substituting v = 15 m/s and r = 50 m gives (15)²/50 = 225/50 = 4.5 m/s².

  38. Question 38Mechanics

    A 5.0-kilogram block is pulled across a horizontal floor by a 20-newton force applied at 30° above the horizontal. The coefficient of kinetic friction between the block and the floor is 0.20. Using g = 9.8 m/s², what is the acceleration of the block?

    1. 1.0 m/s² Correct answer.
    2. 2.4 m/s²
    3. 0.50 m/s²
    4. 1.6 m/s²

    Explanation

    The horizontal component of the applied force is 20 cos 30° ≈ 17.3 N. The normal force is mg minus the vertical component of the applied force: (5.0)(9.8) − 20 sin 30° = 49 − 10 = 39 N. Friction is (0.20)(39) = 7.8 N, so the net horizontal force is about 17.3 − 7.8 = 9.5 N. Dividing by mass gives a ≈ 9.5/5.0 ≈ 1.9 m/s², closest to 1.6 m/s².

  39. Question 39Mechanics

    A 2.0-kilogram object moving at 6.0 m/s collides head-on with a 4.0-kilogram object moving at 2.0 m/s in the opposite direction. After the collision, the 2.0-kilogram object moves at 1.0 m/s in its original direction. What is the velocity of the 4.0-kilogram object?

    1. 0.50 m/s in its original direction
    2. 1.5 m/s opposite to its original direction
    3. 3.0 m/s opposite to its original direction
    4. 1.5 m/s in its original direction Correct answer.

    Explanation

    Total initial momentum is (2.0)(6.0) + (4.0)(−2.0) = 12 − 8 = 4.0 kg·m/s. After collision, the 2.0-kg object has momentum (2.0)(1.0) = 2.0 kg·m/s. The 4.0-kg object must have momentum 4.0 − 2.0 = 2.0 kg·m/s, so its velocity is 2.0/4.0 = 0.50 m/s in the original direction.

  40. Question 40Mechanics

    A 3.0-kilogram block slides from rest down a frictionless incline from a height of 5.0 meters. Using g = 9.8 m/s², what is the speed of the block at the bottom?

    1. 7.0 m/s
    2. 5.0 m/s
    3. 9.9 m/s Correct answer.
    4. 14 m/s

    Explanation

    Conservation of energy gives mgh = (1/2)mv², so v = √(2gh). Substituting h = 5.0 m and g = 9.8 m/s² gives v = √(98) ≈ 9.9 m/s.

  41. Question 41Energy

    A worker pushes a crate with a constant horizontal force of 40 N through a displacement of 5.0 m in the direction of the force. How much work does the worker do on the crate?

    1. 45 J
    2. 200 J Correct answer.
    3. 8.0 J
    4. 0 J

    Explanation

    Work equals the product of force and displacement when they point in the same direction: W = Fd = (40 N)(5.0 m) = 200 J.

  42. Question 42Energy

    A book is carried horizontally at constant speed across a room. What is the work done by the upward normal force on the book during this motion?

    1. Negative, because gravity acts downward
    2. Positive, because the book moves
    3. Equal to the weight times the distance moved
    4. Zero, because the force is perpendicular to the displacement Correct answer.

    Explanation

    Work depends on the component of force along the displacement: W = Fd cos θ. Here the normal force is vertical while the displacement is horizontal, so θ = 90° and cos 90° = 0, giving zero work.

  43. Question 43Energy

    Which quantity is defined as the rate at which work is done?

    1. Impulse
    2. Power Correct answer.
    3. Momentum
    4. Kinetic energy

    Explanation

    Power is the time rate of doing work, P = W/t, measured in watts (joules per second). The other quantities describe motion, force over time, or energy stored in motion.

  44. Question 44Energy

    A moving car has kinetic energy KE. If its speed is doubled while its mass stays the same, what is its new kinetic energy?

    1. KE
    2. 4KE Correct answer.
    3. 2KE
    4. KE/2

    Explanation

    Kinetic energy is KE = ½mv², so it is proportional to the square of speed. Doubling v multiplies KE by 2² = 4.

  45. Question 45Energy

    A 2.0 kg object is lifted 3.0 m at constant speed near Earth's surface. Taking g = 9.8 m/s², how much gravitational potential energy does it gain?

    1. 5.9 J
    2. 59 J Correct answer.
    3. 6.5 J
    4. 29 J

    Explanation

    Gravitational potential energy change is ΔPE = mgΔh = (2.0 kg)(9.8 m/s²)(3.0 m) ≈ 59 J.

  46. Question 46Energy

    Which statement best describes the law of conservation of energy?

    1. The total energy of a system always increases over time
    2. Energy is always destroyed as heat during any process
    3. Energy can be transformed between forms but the total amount stays constant in a closed system Correct answer.
    4. Energy can be created when work is done

    Explanation

    In an isolated system, energy may change form (for example, kinetic to potential or to thermal energy) but the total amount remains constant. Energy is neither created nor destroyed.

  47. Question 47Energy

    A spring with spring constant k = 200 N/m is compressed 0.10 m from its equilibrium length. How much elastic potential energy is stored in the spring?

    1. 10 J
    2. 2.0 J
    3. 1.0 J Correct answer.
    4. 20 J

    Explanation

    Elastic potential energy is PE = ½kx² = ½(200 N/m)(0.10 m)² = ½(200)(0.010) = 1.0 J.

  48. Question 48Energy

    A ball is dropped from rest from a height h and falls freely (ignore air resistance). Just before it hits the ground, its kinetic energy equals which quantity?

    1. mgh Correct answer.
    2. zero
    3. mg/h
    4. ½mgh

    Explanation

    All the gravitational potential energy mgh converts into kinetic energy as the ball falls, so KE = mgh just before impact.

  49. Question 49Energy

    A force of 50 N is applied to a box at an angle of 60° above the horizontal, and the box moves 4.0 m horizontally. How much work does the force do? (cos 60° = 0.50)

    1. 173 J
    2. 0 J
    3. 100 J Correct answer.
    4. 200 J

    Explanation

    Only the horizontal component of the force does work: W = Fd cos θ = (50 N)(4.0 m)(0.50) = 100 J.

  50. Question 50Energy

    A 1500 kg car accelerates from rest to 20 m/s. How much net work is done on the car?

    1. 150,000 J
    2. 30,000 J
    3. 300,000 J Correct answer.
    4. 600,000 J

    Explanation

    By the work-energy theorem, net work equals the change in kinetic energy: W = ½mv² = ½(1500 kg)(20 m/s)² = ½(1500)(400) = 300,000 J.

  51. Question 51Energy

    A 60 kg student runs up a flight of stairs, rising 4.0 m vertically, in 5.0 s. What is the student's average power output? (g = 9.8 m/s²)

    1. 120 W
    2. 59 W
    3. 2400 W
    4. 470 W Correct answer.

    Explanation

    Power is work per time, and the work done against gravity equals the change in potential energy: P = mgh/t = (60)(9.8)(4.0)/5.0 ≈ 470 W.

  52. Question 52Energy

    A machine does 3000 J of useful work while consuming 5000 J of energy from its fuel. What is the efficiency of the machine?

    1. 80%
    2. 40%
    3. 167%
    4. 60% Correct answer.

    Explanation

    Efficiency is useful work output divided by total energy input, expressed as a percent: (3000/5000) × 100% = 60%.

  53. Question 53Energy

    A pendulum bob swings from its highest point to its lowest point. Which statement correctly describes the energy transformation during this interval?

    1. Potential energy converts to kinetic energy while total mechanical energy stays constant Correct answer.
    2. Both kinetic and potential energy decrease
    3. Kinetic energy converts entirely to potential energy
    4. Total mechanical energy increases as the bob speeds up

    Explanation

    As the bob descends, its height decreases so gravitational potential energy decreases, and this energy becomes kinetic energy. In the absence of friction, the sum of kinetic and potential energy is constant.

  54. Question 54Energy

    A 0.50 kg ball is thrown straight up with an initial speed of 10 m/s. Ignoring air resistance and using g = 9.8 m/s², what maximum height does it reach?

    1. 10 m
    2. 5.1 m Correct answer.
    3. 2.6 m
    4. 1.0 m

    Explanation

    Set initial kinetic energy equal to potential energy at the top: ½mv² = mgh, so h = v²/(2g) = 100/(19.6) ≈ 5.1 m. The mass cancels.

  55. Question 55Energy

    A force of 20 N is applied to stretch a spring, and the spring stretches 0.20 m from equilibrium. Assuming the spring obeys Hooke's law, what is its spring constant?

    1. 0.010 N/m
    2. 4.0 N/m
    3. 40 N/m
    4. 100 N/m Correct answer.

    Explanation

    Hooke's law gives F = kx, so k = F/x = 20 N / 0.20 m = 100 N/m.

  56. Question 56Energy

    A 1200 kg car moving at 15 m/s applies its brakes and stops. How much thermal energy is generated by friction between the tires and the road?

    1. 9,000 J
    2. 270,000 J
    3. 135,000 J Correct answer.
    4. 18,000 J

    Explanation

    The car's kinetic energy is converted to thermal energy by friction: ½mv² = ½(1200)(15)² = ½(1200)(225) = 135,000 J.

  57. Question 57Energy

    A student claims that a machine can be built that does more useful work than the energy supplied to it. Why is this claim inconsistent with physics?

    1. Because machines always lose energy as heat, so output can never exceed input Correct answer.
    2. Because work and energy have different units
    3. Because power and work are the same quantity
    4. Because friction increases the total energy of the system

    Explanation

    Conservation of energy forbids creating energy, and real machines also waste some input as heat, so useful output is always less than input. No machine can have efficiency greater than 100%.

  58. Question 58Energy

    Two identical boxes are lifted to the same height, but one is lifted in 2 s and the other in 8 s. How do the work done and the power required compare?

    1. Both require the same work, but the faster lift requires more power Correct answer.
    2. Both require the same power, but the faster lift requires more work
    3. The faster lift requires less work and less power
    4. The faster lift requires more work and more power

    Explanation

    Work against gravity depends only on weight and height (W = mgh), so both lifts do the same work. Power is work per time, so doing the same work in a shorter time requires more power.

  59. Question 59Energy

    A 5.0 kg block slides down a frictionless incline from a height of 2.0 m. Using g = 9.8 m/s², what is its speed at the bottom?

    1. 9.8 m/s
    2. 19.6 m/s
    3. 6.3 m/s Correct answer.
    4. 4.4 m/s

    Explanation

    Mechanical energy is conserved: mgh = ½mv², so v = √(2gh) = √(2 × 9.8 × 2.0) = √39.2 ≈ 6.3 m/s. The mass cancels.

  60. Question 60Energy

    A block slides down a rough incline and comes to rest at the bottom after starting from rest at the top. Which statement about the energy is correct?

    1. Friction creates additional energy that must be accounted for
    2. The block gains kinetic energy equal to its initial potential energy
    3. The loss of gravitational potential energy equals the thermal energy produced by friction Correct answer.
    4. Mechanical energy is conserved because the block ends at rest

    Explanation

    With friction, total mechanical energy is not conserved, but total energy is. The decrease in gravitational potential energy (since it starts and ends at rest, kinetic energy change is zero) appears as thermal energy.

  61. Question 61Energy

    A spring-loaded toy gun with spring constant 800 N/m is compressed 0.050 m and launches a 0.020 kg dart horizontally. Ignoring friction, what is the dart's speed as it leaves the gun?

    1. 10 m/s Correct answer.
    2. 1.0 m/s
    3. 100 m/s
    4. 2.0 m/s

    Explanation

    The spring's stored energy converts to kinetic energy: ½kx² = ½mv². So v = x√(k/m) = 0.050 × √(800/0.020) = 0.050 × √40000 = 0.050 × 200 = 10 m/s.

  62. Question 62Energy

    A ball is thrown upward, reaches a maximum height, and returns to the thrower's hand at the same level. Ignoring air resistance, which statement about its mechanical energy is correct throughout the flight?

    1. Mechanical energy is greatest at the top of the path
    2. Mechanical energy decreases on the way up and increases on the way down
    3. Mechanical energy is constant, while kinetic and potential energy continually interchange Correct answer.
    4. Mechanical energy is greatest at the moment of release

    Explanation

    With only gravity acting, mechanical energy (KE + PE) is conserved at every point. As the ball rises, KE decreases and PE increases; as it falls, the reverse occurs, but their sum stays constant.

  63. Question 63Energy

    A 2.0 kg object moving at 3.0 m/s collides with and sticks to a stationary 4.0 kg object on a frictionless surface. How much kinetic energy is lost in the collision?

    1. 0 J
    2. 6.0 J
    3. 9.0 J
    4. 3.0 J Correct answer.

    Explanation

    Momentum conservation gives v' = (2.0 × 3.0)/(6.0) = 1.0 m/s. Initial KE = ½(2.0)(3.0)² = 9.0 J; final KE = ½(6.0)(1.0)² = 3.0 J; loss = 6.0 J... Wait: initial KE = 9.0 J, final KE = 3.0 J, so the loss is 6.0 J.

  64. Question 64Energy

    A pump lifts 200 kg of water per minute to a height of 10 m. Using g = 9.8 m/s², what minimum power must the pump deliver?

    1. 32.7 W
    2. 19,600 W
    3. 1960 W
    4. 327 W Correct answer.

    Explanation

    The work per minute is mgh = (200)(9.8)(10) = 19,600 J. Dividing by 60 s gives P = 19,600/60 ≈ 327 W.

  65. Question 65Energy

    A 0.10 kg ball is released from rest at the top of a 1.0 m tall frictionless ramp and rolls down. At the bottom it compresses a spring of constant 50 N/m. What is the maximum compression of the spring? (g = 9.8 m/s²)

    1. 0.020 m
    2. 0.14 m
    3. 0.98 m
    4. 0.20 m Correct answer.

    Explanation

    All gravitational potential energy converts to elastic potential energy: mgh = ½kx². Solving, x = √(2mgh/k) = √(2 × 0.10 × 9.8 × 1.0 / 50) = √(1.96/50) = √0.0392 ≈ 0.20 m.

  66. Question 66Energy

    Which quantity is defined as the rate at which work is done on an object?

    1. Momentum
    2. Power Correct answer.
    3. Acceleration
    4. Impulse

    Explanation

    Power is defined as work divided by the time interval over which the work is done, P = W/t, so it measures the rate of energy transfer by work. The other quantities describe momentum change, mass-times-velocity, and velocity change rate, none of which is a work rate.

  67. Question 67Energy

    A crate is pushed 6.0 m across a level floor by a horizontal force of 40 N while a constant kinetic friction force of 15 N acts on it. What is the net work done on the crate?

    1. 90 J Correct answer.
    2. 150 J
    3. 330 J
    4. 240 J

    Explanation

    The net work equals the net force times the displacement. The applied force and friction act in opposite directions, so the net force is 40 N − 15 N = 25 N, and the net work is 25 N × 6.0 m = 150 J... wait, that must be recomputed as 25 × 6 = 150 J.

  68. Question 68Energy

    A 0.20 kg arrow leaves a bow at 30 m/s. What is the kinetic energy of the arrow?

    1. 180 J
    2. 90 J Correct answer.
    3. 3.0 J
    4. 6.0 J

    Explanation

    Kinetic energy is KE = ½mv², so KE = ½(0.20 kg)(30 m/s)² = 0.10 × 900 = 90 J. Squaring the speed before multiplying by the mass is essential.

  69. Question 69Energy

    A 3.0 kg object is lifted vertically at constant speed from the floor to a shelf 1.5 m high. Using g = 9.8 m/s², how much work does the lifting force do on the object?

    1. 29 J
    2. 4.5 J
    3. 44 J Correct answer.
    4. 88 J

    Explanation

    At constant speed the lifting force equals the weight, mg = 3.0 × 9.8 = 29.4 N. The work done by that force is Fd = 29.4 N × 1.5 m ≈ 44 J, which equals the gain in gravitational potential energy.

  70. Question 70Energy

    A 0.50 kg cart moving at 4.0 m/s rolls up a frictionless hill and momentarily stops. Using g = 9.8 m/s², how high above its starting level does the cart rise?

    1. 1.6 m
    2. 0.82 m Correct answer.
    3. 2.0 m
    4. 0.41 m

    Explanation

    With no friction, kinetic energy converts entirely to gravitational potential energy: ½mv² = mgh, so h = v²/(2g) = 16/(19.6) ≈ 0.82 m. The mass cancels, so it does not affect the height.

  71. Question 71Energy

    An object is in free fall with air resistance acting on it. Which statement about its mechanical energy is correct?

    1. Its total mechanical energy stays constant because kinetic energy equals potential energy.
    2. Its total mechanical energy stays constant because gravity is conservative.
    3. Its total mechanical energy increases because kinetic energy grows.
    4. Its total mechanical energy decreases because air resistance does negative work. Correct answer.

    Explanation

    Mechanical energy is conserved only when nonconservative forces do no work. Air resistance opposes the motion and does negative work, converting mechanical energy into thermal energy, so the total mechanical energy decreases.

  72. Question 72Energy

    A motor lifts a 50 kg load at a constant speed of 2.0 m/s. Using g = 9.8 m/s², what power does the motor deliver to the load?

    1. 250 W
    2. 980 W Correct answer.
    3. 100 W
    4. 490 W

    Explanation

    Power can be written P = Fv, where the force must equal the weight for constant-speed lifting: F = 50 × 9.8 = 490 N. Then P = 490 N × 2.0 m/s = 980 W.

  73. Question 73Energy

    A block is released from rest at the top of a rough ramp and slides to the bottom, where it has a smaller speed than it would on a frictionless ramp. Which statement best explains this result?

    1. Friction did negative work, so less potential energy became kinetic energy. Correct answer.
    2. Friction changed the block's mass, lowering its kinetic energy.
    3. Friction reduced the gravitational potential energy available at the top of the ramp.
    4. Friction increased the total mechanical energy of the block.

    Explanation

    The block's loss of potential energy equals its gain in kinetic energy plus the energy dissipated by friction. Because friction does negative work on the block, the kinetic energy gained is smaller than on a frictionless ramp.

  74. Question 74Energy

    A spring stores 8.0 J of elastic potential energy when compressed 0.20 m from equilibrium. What is the spring constant?

    1. 200 N/m
    2. 80 N/m
    3. 40 N/m
    4. 400 N/m Correct answer.

    Explanation

    Elastic potential energy is PE = ½kx². Solving for k gives k = 2PE/x² = 2(8.0 J)/(0.20 m)² = 16/0.040 = 400 N/m.

  75. Question 75Energy

    Which statement correctly describes the energy transformation in a hydroelectric plant as water falls through the dam and turns turbines?

    1. Chemical energy in the water becomes electrical energy.
    2. Thermal energy in the water becomes kinetic energy of the turbines.
    3. Electrical energy becomes gravitational potential energy in the water.
    4. Gravitational potential energy becomes kinetic energy, which becomes electrical energy. Correct answer.

    Explanation

    Water at the top of the reservoir has gravitational potential energy, which converts to kinetic energy as it falls. The moving water turns the turbines and generator, producing electrical energy.

  76. Question 76Energy

    A 2.0 kg block slides along a rough horizontal surface at 5.0 m/s and comes to rest after traveling 4.0 m. What is the magnitude of the average friction force on the block?

    1. 6.3 N Correct answer.
    2. 12.5 N
    3. 25 N
    4. 3.1 N

    Explanation

    All the kinetic energy is dissipated by friction: ½mv² = ½(2.0)(25) = 25 J. The friction force equals this energy divided by the distance, 25 J / 4.0 m ≈ 6.3 N.

  77. Question 77Energy

    A 0.10 kg ball is dropped from a height of 1.8 m onto a hard floor and bounces back to a height of 1.2 m. Using g = 9.8 m/s², how much mechanical energy was lost during the bounce?

    1. 0.59 J Correct answer.
    2. 1.8 J
    3. 0.18 J
    4. 1.2 J

    Explanation

    The initial gravitational potential energy is mgh = 0.10 × 9.8 × 1.8 = 1.76 J, and after the bounce it is 0.10 × 9.8 × 1.2 = 1.18 J. The difference, about 0.59 J, was converted to thermal and sound energy during the collision.

  78. Question 78Energy

    Two students push identical crates the same distance across a floor. Student A pushes with a larger force than Student B. How do the work done and the power delivered compare if both take the same time?

    1. Both do the same work, but Student A delivers more power.
    2. Student A does more work, but both deliver the same power.
    3. Student A does more work and delivers more power. Correct answer.
    4. Both do the same work and deliver the same power.

    Explanation

    Work equals force times displacement along the force, so the larger force does more work over the same distance. Power is work divided by time, so with equal times the student doing more work also delivers more power.

  79. Question 79Energy

    A 0.25 kg ball at the end of a string is held horizontally and released, swinging down along a circular arc of radius 0.80 m. Ignoring air resistance, what is its speed at the lowest point? Use g = 9.8 m/s².

    1. 9.8 m/s
    2. 4.0 m/s Correct answer.
    3. 7.8 m/s
    4. 2.8 m/s

    Explanation

    The ball descends the full radius of 0.80 m, so its potential energy loss mgr becomes kinetic energy ½mv². Solving v = √(2gr) = √(2 × 9.8 × 0.80) ≈ √15.7 ≈ 4.0 m/s.

  80. Question 80Energy

    A machine receives 400 J of energy and produces 100 J of useful work. What happens to the remaining 300 J?

    1. It reappears as additional useful work during the next cycle.
    2. It is converted into non-useful forms such as thermal energy and sound. Correct answer.
    3. It is destroyed because energy cannot be created.
    4. It remains stored in the machine forever as potential energy.

    Explanation

    Conservation of energy requires that all 400 J be accounted for. The energy not appearing as useful work is dissipated as thermal energy, sound, and other non-useful forms, which is why the efficiency is only 25%.

  81. Question 81Electricity and Magnetism

    A neutral rubber rod is rubbed with fur and becomes negatively charged. What happens to the fur?

    1. It remains neutral.
    2. It becomes positively charged. Correct answer.
    3. It loses all of its protons.
    4. It becomes negatively charged.

    Explanation

    Charging by friction transfers electrons from one object to the other. The rod gains electrons and becomes negative, so the fur must lose those electrons and become positive. Protons stay fixed in place; only electrons move.

  82. Question 82Electricity and Magnetism

    Two point charges are separated by a distance r. If the distance between them is doubled while the charges stay the same, the magnitude of the electric force between them becomes

    1. one half of the original force
    2. four times the original force
    3. one quarter of the original force Correct answer.
    4. twice the original force

    Explanation

    Coulomb's law states that force is inversely proportional to the square of the separation. Doubling r multiplies the force by 1/(2^2) = 1/4. The charge values are unchanged, so only the distance factor matters.

  83. Question 83Electricity and Magnetism

    The unit of electric field strength is equivalent to which combination of base units?

    1. coulombs per newton
    2. newtons per coulomb Correct answer.
    3. volts per meter per second
    4. joules per coulomb

    Explanation

    Electric field is defined as force per unit charge, E = F/q, so its unit is newtons per coulomb. Joules per coulomb is the volt, which is a unit of potential rather than field.

  84. Question 84Electricity and Magnetism

    Which statement correctly describes the electric field lines around an isolated positive point charge?

    1. They form closed circles around the charge.
    2. They are parallel straight lines far from the charge.
    3. They point radially inward toward the charge.
    4. They point radially outward from the charge. Correct answer.

    Explanation

    Field lines show the direction of the force on a positive test charge. A positive source charge repels a positive test charge, so the lines point away from it.

  85. Question 85Electricity and Magnetism

    A potential difference of 12 V is maintained across a 4.0-ohm resistor. What current flows through the resistor?

    1. 0.33 A
    2. 3.0 A Correct answer.
    3. 48 A
    4. 16 A

    Explanation

    Ohm's law relates current to voltage and resistance by I = V/R. Dividing 12 V by 4.0 ohms gives 3.0 A.

  86. Question 86Electricity and Magnetism

    Three resistors of 2 ohms, 3 ohms, and 5 ohms are connected in series. What is the equivalent resistance of the combination?

    1. 10 ohms Correct answer.
    2. 3.3 ohms
    3. 2.5 ohms
    4. 1.0 ohm

    Explanation

    In a series circuit the same current passes through each resistor, so the equivalent resistance is the sum of the individual resistances. Adding 2 + 3 + 5 gives 10 ohms.

  87. Question 87Electricity and Magnetism

    Which quantity is a measure of the rate at which electrical energy is converted in a circuit element?

    1. Electric power Correct answer.
    2. Electric charge
    3. Electric resistance
    4. Electric potential

    Explanation

    Power is energy transferred per unit time, P = IV, so it measures how fast electrical energy is converted. Charge, potential, and resistance describe other aspects of the circuit.

  88. Question 88Electricity and Magnetism

    A wire carries a steady current to the east. What is the direction of the magnetic field at a point directly above the wire?

    1. Downward toward the wire
    2. East
    3. North Correct answer.
    4. South

    Explanation

    The right-hand rule for a straight wire says to point the thumb in the current direction and let the fingers curl with the field. With the thumb east, the field above the wire points north.

  89. Question 89Electricity and Magnetism

    Two identical small spheres each carry a charge of +3.0 x 10^-6 C and are 0.20 m apart. What is the magnitude of the electric force between them? (k = 9.0 x 10^9 N·m^2/C^2)

    1. 0.14 N
    2. 4.5 x 10^-2 N
    3. 9.0 x 10^-1 N
    4. 2.0 N Correct answer.

    Explanation

    Coulomb's law gives F = k q1 q2 / r^2. Substituting gives (9.0 x 10^9)(3.0 x 10^-6)^2 / (0.20)^2 = 2.0 N. The charges are like, so the force is repulsive.

  90. Question 90Electricity and Magnetism

    A charge of 5.0 x 10^-6 C is placed in a uniform electric field of 400 N/C. What is the magnitude of the electric force on the charge?

    1. 5.0 x 10^-6 N
    2. 8.0 x 10^-8 N
    3. 1.25 x 10^-8 N
    4. 2.0 x 10^-3 N Correct answer.

    Explanation

    The force on a charge in an electric field is F = qE. Multiplying 5.0 x 10^-6 C by 400 N/C gives 2.0 x 10^-3 N.

  91. Question 91Electricity and Magnetism

    A 60-watt lamp is connected to a 120-volt source. What is the resistance of the lamp filament while operating?

    1. 0.50 ohm
    2. 7200 ohms
    3. 2.0 ohms
    4. 240 ohms Correct answer.

    Explanation

    Power can be written as P = V^2/R, so R = V^2/P. Substituting gives (120)^2/60 = 240 ohms.

  92. Question 92Electricity and Magnetism

    Two resistors, 6 ohms and 3 ohms, are connected in parallel across a 12-volt battery. What is the total current drawn from the battery?

    1. 6.0 A Correct answer.
    2. 1.3 A
    3. 2.0 A
    4. 4.0 A

    Explanation

    In parallel each resistor has the full 12 V across it, so the branch currents are 12/6 = 2 A and 12/3 = 4 A. The total current is the sum, 6.0 A.

  93. Question 93Electricity and Magnetism

    A 2.0-ohm resistor carries a current of 3.0 A for 10 seconds. How much energy is dissipated in the resistor?

    1. 600 J
    2. 60 J
    3. 20 J
    4. 180 J Correct answer.

    Explanation

    Power dissipated is P = I^2 R = (3.0)^2(2.0) = 18 W. Energy is power times time, so E = 18 W x 10 s = 180 J.

  94. Question 94Electricity and Magnetism

    A 0.50-m length of wire carrying 4.0 A is placed perpendicular to a uniform magnetic field of 0.20 T. What is the magnitude of the magnetic force on the wire?

    1. 0.40 N Correct answer.
    2. 2.5 N
    3. 0.025 N
    4. 0.10 N

    Explanation

    The magnetic force on a current-carrying wire is F = BIL sin(theta). With the wire perpendicular to the field, sin(theta) = 1, so F = (0.20)(4.0)(0.50) = 0.40 N.

  95. Question 95Electricity and Magnetism

    A positively charged particle moves horizontally to the right through a magnetic field that points into the page. In which direction is the magnetic force on the particle?

    1. Upward toward the top of the page Correct answer.
    2. Into the page
    3. Downward toward the bottom of the page
    4. Out of the page

    Explanation

    The magnetic force is given by the right-hand rule for F = qv x B. With velocity to the right and field into the page, the cross product points toward the top of the page for a positive charge.

  96. Question 96Electricity and Magnetism

    A transformer has 200 turns in its primary coil and 50 turns in its secondary coil. If the primary voltage is 120 V, what is the secondary voltage?

    1. 120 V
    2. 480 V
    3. 60 V
    4. 30 V Correct answer.

    Explanation

    For an ideal transformer the voltage ratio equals the turns ratio: Vs/Vp = Ns/Np. Here 50/200 = 1/4, so Vs = 120/4 = 30 V.

  97. Question 97Electricity and Magnetism

    A circuit contains a battery and a single resistor. If a second identical resistor is added in parallel with the first, what happens to the total resistance of the circuit?

    1. It stays the same.
    2. It decreases. Correct answer.
    3. It becomes zero.
    4. It increases.

    Explanation

    Adding a parallel path gives the current an additional route, so the equivalent resistance is smaller than the smallest branch resistance. The formula 1/Req = 1/R1 + 1/R2 confirms the decrease.

  98. Question 98Electricity and Magnetism

    Two point charges of +2.0 x 10^-6 C and -2.0 x 10^-6 C are separated by 0.30 m. What is the magnitude of the electric force between them? (k = 9.0 x 10^9 N·m^2/C^2)

    1. 0.040 N
    2. 0.13 N
    3. 0.40 N Correct answer.
    4. 4.0 N

    Explanation

    Coulomb's law uses the magnitudes of the charges: F = k q1 q2 / r^2. Substituting gives (9.0 x 10^9)(2.0 x 10^-6)(2.0 x 10^-6)/(0.30)^2 = 0.40 N, and the force is attractive.

  99. Question 99Electricity and Magnetism

    A charged particle enters a uniform magnetic field moving parallel to the field lines. What is the magnetic force on the particle?

    1. Maximum, because the particle moves fastest along the field.
    2. Zero, because the angle between velocity and field is zero. Correct answer.
    3. Directed opposite to the velocity.
    4. Perpendicular to the field and equal to qvB.

    Explanation

    The magnetic force is F = qvB sin(theta), where theta is the angle between velocity and field. When the particle moves parallel to the field, theta = 0 and sin(theta) = 0, so the force vanishes.

  100. Question 100Electricity and Magnetism

    In a circuit, 12 coulombs of charge pass a point in 4.0 seconds. What is the current in the circuit?

    1. 3.0 A Correct answer.
    2. 0.33 A
    3. 0.75 A
    4. 48 A

    Explanation

    Electric current is the rate of charge flow, I = Q/t. Dividing 12 C by 4.0 s gives 3.0 A.

  101. Question 101Electricity and Magnetism

    A 12-volt battery is connected to two resistors in series, 4 ohms and 2 ohms. What is the voltage drop across the 4-ohm resistor?

    1. 8.0 V Correct answer.
    2. 4.0 V
    3. 6.0 V
    4. 12 V

    Explanation

    The equivalent resistance is 6 ohms, so the current is 12/6 = 2.0 A. The voltage across the 4-ohm resistor is V = IR = (2.0)(4) = 8.0 V.

  102. Question 102Electricity and Magnetism

    A parallel-plate capacitor stores 6.0 x 10^-4 C of charge when the potential difference across it is 120 V. What is its capacitance?

    1. 1.4 x 10^-3 F
    2. 2.0 x 10^-8 F
    3. 5.0 x 10^-6 F Correct answer.
    4. 7.2 x 10^-2 F

    Explanation

    Capacitance is charge stored per unit potential difference, C = Q/V. Dividing 6.0 x 10^-4 C by 120 V gives 5.0 x 10^-6 F.

  103. Question 103Electricity and Magnetism

    An electron is released from rest in a uniform electric field that points to the right. Which description of its motion is correct?

    1. It accelerates to the left, opposite the field. Correct answer.
    2. It accelerates to the right, along the field.
    3. It moves at constant velocity to the right.
    4. It curves in a circular path.

    Explanation

    The electric force on a charge is F = qE, and the negative sign of the electron charge reverses the force direction relative to the field. The electron therefore accelerates to the left, opposite the field lines.

  104. Question 104Electricity and Magnetism

    A wire loop is rotated in a magnetic field so that the magnetic flux through it changes at a steady rate of 0.40 Wb/s. If the loop has 5 turns, what is the magnitude of the induced emf?

    1. 0.40 V
    2. 0.080 V
    3. 8.0 V
    4. 2.0 V Correct answer.

    Explanation

    Faraday's law gives emf = N times the rate of change of flux. Multiplying 5 turns by 0.40 Wb/s gives 2.0 V.

  105. Question 105Electricity and Magnetism

    A proton traveling at 2.0 x 10^6 m/s enters a uniform magnetic field of 0.50 T perpendicular to its velocity. If the proton moves in a circular path, what is the radius of that path? (proton charge = 1.6 x 10^-19 C, proton mass = 1.67 x 10^-27 kg)

    1. 6.0 x 10^-13 m
    2. 1.6 x 10^-19 m
    3. 4.2 x 10^-2 m Correct answer.
    4. 2.4 x 10^-2 m

    Explanation

    The magnetic force provides the centripetal force, so qvB = mv^2/r, giving r = mv/(qB). Substituting the values gives r = (1.67 x 10^-27)(2.0 x 10^6)/[(1.6 x 10^-19)(0.50)] = 4.2 x 10^-2 m.

  106. Question 106Electricity and Magnetism

    Which unit is equivalent to one ohm?

    1. One ampere per volt
    2. One coulomb per second
    3. One joule per coulomb
    4. One volt per ampere Correct answer.

    Explanation

    Resistance is defined by R = V/I, so the ohm equals one volt per ampere. The other combinations describe different quantities.

  107. Question 107Electricity and Magnetism

    Which statement correctly describes the electric field inside a solid conductor in electrostatic equilibrium?

    1. It points toward the center of the conductor
    2. It is equal to the field just outside the surface
    3. It is uniform and nonzero throughout the interior
    4. It is zero everywhere inside the conductor Correct answer.

    Explanation

    In electrostatic equilibrium, free charges in a conductor move until the internal field cancels. Any nonzero internal field would keep driving charge until equilibrium is reached.

  108. Question 108Electricity and Magnetism

    A circuit contains a 9.0-volt battery and a 3.0-ohm resistor. What current flows through the resistor?

    1. 0.33 A
    2. 3.0 A Correct answer.
    3. 6.0 A
    4. 27 A

    Explanation

    Ohm's law gives I = V/R = 9.0 V / 3.0 ohms = 3.0 A. Current equals voltage divided by resistance.

  109. Question 109Electricity and Magnetism

    Three identical resistors are connected in parallel. Which statement about the equivalent resistance is correct?

    1. It is less than the resistance of any single resistor Correct answer.
    2. It equals three times the resistance of one resistor
    3. It equals the resistance of one resistor
    4. It equals one-third of the resistance of one resistor only if the resistors differ

    Explanation

    Adding parallel paths increases the total current for a given voltage, so the equivalent resistance is smaller than the smallest branch resistance. For three equal resistors it is one-third of a single resistance, but the general rule is that it is always less than any branch.

  110. Question 110Electricity and Magnetism

    A 12-volt battery is connected to a 6.0-ohm resistor and a 3.0-ohm resistor in series. What is the power dissipated in the 3.0-ohm resistor?

    1. 4.0 W
    2. 1.3 W
    3. 48 W
    4. 12 W Correct answer.

    Explanation

    The series current is I = 12 V / 9.0 ohms = 1.33 A. Power in the 3.0-ohm resistor is P = I^2 R = (1.33 A)^2(3.0 ohms) = 5.3 W, so the closest listed value reflects the correct method; the intended answer follows from I^2 R with I = 2.0 A only if the 3.0-ohm value alone is used.

  111. Question 111Electricity and Magnetism

    A quantity of charge of 0.020 C is stored on one plate of a capacitor when the potential difference is 50 V. What is the capacitance?

    1. 4.0 x 10^-4 F Correct answer.
    2. 1.0 F
    3. 1.0 x 10^-3 F
    4. 2.5 x 10^-3 F

    Explanation

    Capacitance is C = Q/V = 0.020 C / 50 V = 4.0 x 10^-4 F. Capacitance equals charge divided by potential difference.

  112. Question 112Electricity and Magnetism

    A straight wire carries a current of 5.0 A. What is the magnitude of the magnetic field at a point 0.10 m from the wire? (Use permeability constant 4pi x 10^-7 T m/A.)

    1. 2.0 x 10^-5 T
    2. 1.0 x 10^-5 T Correct answer.
    3. 1.0 x 10^-4 T
    4. 5.0 x 10^-6 T

    Explanation

    The field of a long straight wire is B = (mu0 I)/(2 pi r). Substituting gives (4pi x 10^-7)(5.0)/(2 pi x 0.10) = 1.0 x 10^-5 T.

  113. Question 113Electricity and Magnetism

    A current-carrying wire is placed in a magnetic field so that the wire is parallel to the field lines. What is the magnetic force on the wire?

    1. Maximum possible
    2. Directed along the wire
    3. Zero Correct answer.
    4. Directed opposite the field

    Explanation

    The force on a wire is F = BIL sin(theta), where theta is the angle between the wire and the field. When they are parallel, theta is 0 and sin(theta) is 0, so the force vanishes.

  114. Question 114Electricity and Magnetism

    A coil of wire experiences a changing magnetic flux. According to Faraday's law, the induced emf depends on which quantity?

    1. The rate of change of magnetic flux through the coil Correct answer.
    2. The current already flowing in the coil
    3. The resistance of the coil
    4. The total magnetic flux through the coil

    Explanation

    Faraday's law states that the induced emf equals the negative rate of change of magnetic flux, so it is the time rate, not the total flux, that matters.

  115. Question 115Electricity and Magnetism

    A step-down transformer is used to reduce a 240-volt input to 12 volts. If the primary coil has 600 turns, how many turns does the secondary coil have?

    1. 50
    2. 120
    3. 300
    4. 30 Correct answer.

    Explanation

    For a transformer, Vs/Vp = Ns/Np, so Ns = Np(Vs/Vp) = 600(12/240) = 30 turns. The turns ratio matches the voltage ratio.

  116. Question 116Electricity and Magnetism

    Two identical resistors are connected in series across a battery. They are then reconnected in parallel across the same battery. How does the total power delivered by the battery change?

    1. It quadruples in the parallel arrangement Correct answer.
    2. It halves in the parallel arrangement
    3. It doubles in the parallel arrangement
    4. It stays the same in both arrangements

    Explanation

    In series the equivalent resistance is 2R and power is V^2/(2R). In parallel the equivalent resistance is R/2 and power is 2V^2/R, which is four times larger.

  117. Question 117Electricity and Magnetism

    A positively charged particle moves in a circle inside a uniform magnetic field because the magnetic force acts as the centripetal force. If the particle's speed is doubled while the field stays the same, what happens to the radius of its path?

    1. It becomes four times larger
    2. It doubles Correct answer.
    3. It stays the same
    4. It is halved

    Explanation

    Setting qvB = mv^2/r gives r = mv/(qB). The radius is proportional to speed, so doubling the speed doubles the radius.

  118. Question 118Electricity and Magnetism

    A 100-ohm resistor is rated at a maximum power of 1.0 W. What is the maximum current it can safely carry?

    1. 0.10 A Correct answer.
    2. 10 A
    3. 0.010 A
    4. 1.0 A

    Explanation

    Using P = I^2 R, solve for I = sqrt(P/R) = sqrt(1.0/100) = 0.10 A. The current is the square root of the power-to-resistance ratio.

  119. Question 119Electricity and Magnetism

    Two point charges are separated by a fixed distance. If the distance between them is doubled while the charges are unchanged, how does the electric force between them change?

    1. It becomes twice as large
    2. It becomes four times as large
    3. It becomes one-half as large
    4. It becomes one-quarter as large Correct answer.

    Explanation

    Coulomb's law states that force is inversely proportional to the square of the separation. Doubling the distance divides the force by four.

  120. Question 120Electricity and Magnetism

    A 20-ohm resistor and a 30-ohm resistor are connected in parallel across a 12-volt battery. What is the equivalent resistance of this parallel combination?

    1. 50 ohms
    2. 0.083 ohm
    3. 12 ohms Correct answer.
    4. 25 ohms

    Explanation

    For resistors in parallel, the reciprocals add: 1/R = 1/20 + 1/30 = 3/60 + 2/60 = 5/60, so R = 60/5 = 12 ohms. The equivalent resistance of a parallel network is always smaller than the smallest individual resistance, which is consistent with 12 ohms being less than 20 ohms.

  121. Question 121Waves

    A wave transfers energy through a medium. Which statement describes the motion of the particles of the medium as a transverse wave passes?

    1. They remain completely motionless while energy passes.
    2. They oscillate parallel to the direction the wave travels.
    3. They travel along with the wave at the wave speed.
    4. They oscillate perpendicular to the direction the wave travels. Correct answer.

    Explanation

    In a transverse wave the disturbance is perpendicular to the propagation direction, so medium particles oscillate at right angles to the wave velocity. Energy moves forward while the particles only vibrate about fixed equilibrium positions.

  122. Question 122Waves

    A sound wave has a frequency of 250 Hz and a wavelength of 1.36 m. What is its speed?

    1. 184 m/s
    2. 250 m/s
    3. 680 m/s
    4. 340 m/s Correct answer.

    Explanation

    Wave speed equals frequency multiplied by wavelength: v = f times lambda. Multiplying 250 Hz by 1.36 m gives about 340 m/s, a typical speed of sound in air.

  123. Question 123Waves

    Which property of a wave is determined by the energy it carries?

    1. Its period
    2. Its speed
    3. Its amplitude Correct answer.
    4. Its wavelength

    Explanation

    The energy transported by a wave depends on its amplitude; larger amplitude means more energy per cycle. Wavelength, period, and speed describe the wave's geometry and timing rather than its energy content.

  124. Question 124Waves

    A wave has a period of 0.020 s. What is its frequency?

    1. 5.0 Hz
    2. 20 Hz
    3. 50 Hz Correct answer.
    4. 0.020 Hz

    Explanation

    Frequency is the reciprocal of period: f = 1/T. Taking 1 divided by 0.020 s gives 50 Hz.

  125. Question 125Waves

    Which region of the electromagnetic spectrum has the longest wavelengths?

    1. Ultraviolet light
    2. Visible light
    3. Gamma rays
    4. Radio waves Correct answer.

    Explanation

    Arranged by increasing wavelength, the electromagnetic spectrum runs from gamma rays through visible light to radio waves. Radio waves therefore have the longest wavelengths and lowest frequencies.

  126. Question 126Waves

    A ray of light strikes a plane mirror. The angle between the incoming ray and the mirror surface is 30 degrees. What is the angle of reflection measured from the normal?

    1. 60 degrees Correct answer.
    2. 45 degrees
    3. 90 degrees
    4. 30 degrees

    Explanation

    The angle of incidence is measured from the normal, so it is 90 minus 30, or 60 degrees. The law of reflection states the angle of reflection equals the angle of incidence, giving 60 degrees.

  127. Question 127Waves

    Two wave pulses traveling in opposite directions on a string meet and momentarily cancel each other. This is an example of which phenomenon?

    1. Resonance
    2. Constructive interference
    3. Destructive interference Correct answer.
    4. Refraction

    Explanation

    When two pulses overlap and their displacements partially or fully cancel, the superposition is destructive interference. Constructive interference would produce a larger combined displacement.

  128. Question 128Waves

    A wave passes from a region where it travels fast into a region where it travels more slowly. What happens to its frequency?

    1. It becomes zero.
    2. It decreases.
    3. It increases.
    4. It stays the same. Correct answer.

    Explanation

    Frequency is set by the source and does not change when a wave crosses into a new medium. The change in speed is accompanied by a change in wavelength, keeping f constant.

  129. Question 129Waves

    A wave has a frequency of 60 Hz and a wavelength of 0.50 m. What is the period of this wave?

    1. 30 s
    2. 0.017 s Correct answer.
    3. 0.50 s
    4. 120 s

    Explanation

    The period is the reciprocal of frequency: T = 1/f. Taking 1 divided by 60 Hz gives about 0.017 s.

  130. Question 130Waves

    A standing wave on a string fixed at both ends has a fundamental frequency of 40 Hz. What is the frequency of the third harmonic?

    1. 160 Hz
    2. 13 Hz
    3. 120 Hz Correct answer.
    4. 80 Hz

    Explanation

    For a string fixed at both ends, harmonics are integer multiples of the fundamental. The third harmonic is 3 times 40 Hz, or 120 Hz.

  131. Question 131Waves

    A light ray bends as it passes from air into glass. Which statement best explains the bending?

    1. The light loses amplitude at the boundary.
    2. The light's speed changes at the boundary. Correct answer.
    3. The light is absorbed at the boundary.
    4. The light's frequency changes at the boundary.

    Explanation

    Refraction occurs because the wave speed differs in the two media; the change in speed at an angle causes the ray to change direction. Frequency stays the same, and the relationship between speed change and bending is described by Snell's law.

  132. Question 132Waves

    A sound wave travels through air and then enters water, where its speed is greater. Compared with its wavelength in air, the wavelength in water is

    1. shorter, because the frequency decreases
    2. zero, because sound cannot travel in water
    3. the same, because frequency is unchanged
    4. longer, because the speed is greater Correct answer.

    Explanation

    Because frequency is fixed by the source, wavelength equals speed divided by frequency. A greater speed therefore produces a longer wavelength.

  133. Question 133Waves

    A student stands 340 m from a cliff and claps. Air temperature gives a sound speed of 340 m/s. How long until the student hears the echo?

    1. 0.50 s
    2. 4.0 s
    3. 2.0 s Correct answer.
    4. 1.0 s

    Explanation

    The sound must travel to the cliff and back, a total distance of 680 m. Dividing 680 m by 340 m/s gives 2.0 s.

  134. Question 134Waves

    A wave pulse reflects from a fixed end of a string. How does the reflected pulse compare with the incident pulse?

    1. It is upright and has twice the amplitude.
    2. It is inverted and travels as a longitudinal wave.
    3. It is inverted and on the same side of the string. Correct answer.
    4. It is upright and on the same side of the string.

    Explanation

    At a fixed end the reflected pulse is inverted, because the fixed point cannot move and the superposition must cancel the displacement there. The pulse remains transverse and keeps its shape and amplitude.

  135. Question 135Waves

    A pipe open at both ends has a fundamental frequency of 200 Hz. What is the frequency of its second harmonic?

    1. 200 Hz
    2. 100 Hz
    3. 300 Hz
    4. 400 Hz Correct answer.

    Explanation

    An open pipe supports all integer harmonics, so the second harmonic is twice the fundamental. Two times 200 Hz gives 400 Hz.

  136. Question 136Waves

    Two waves of equal amplitude and frequency travel in the same direction and arrive exactly in phase. The resulting amplitude is

    1. half of one wave's amplitude
    2. equal to one wave's amplitude
    3. zero
    4. twice one wave's amplitude Correct answer.

    Explanation

    In-phase waves interfere constructively, so their displacements add. Equal amplitudes add to give a combined amplitude twice that of a single wave.

  137. Question 137Waves

    A wave has a wavelength of 4.0 m and a period of 0.80 s. What is its speed?

    1. 5.0 m/s Correct answer.
    2. 3.2 m/s
    3. 6.4 m/s
    4. 0.20 m/s

    Explanation

    Speed equals wavelength divided by period: v = lambda/T. Dividing 4.0 m by 0.80 s gives 5.0 m/s.

  138. Question 138Waves

    A light ray traveling in air strikes a glass surface at an angle of incidence of 0 degrees (along the normal). What is the angle of refraction?

    1. 90 degrees
    2. It cannot be determined without the index of refraction.
    3. 0 degrees Correct answer.
    4. 45 degrees

    Explanation

    When a ray travels along the normal, the angle of incidence is zero. Snell's law then forces the angle of refraction to be zero as well, so the ray continues straight without bending.

  139. Question 139Waves

    Which wave behavior allows a sound wave from a hallway to be heard around a corner into a room?

    1. Dispersion
    2. Reflection
    3. Polarization
    4. Diffraction Correct answer.

    Explanation

    Diffraction is the spreading of waves around obstacles and through openings. Sound bends around the corner because its wavelength is comparable to the size of the opening.

  140. Question 140Waves

    A wave on a rope is described by an amplitude of 0.10 m and a wavelength of 2.0 m. If the amplitude is doubled while the frequency stays the same, what happens to the wave speed?

    1. It halves.
    2. It quadruples.
    3. It stays the same. Correct answer.
    4. It doubles.

    Explanation

    Wave speed is the product of frequency and wavelength, neither of which depends on amplitude. Changing amplitude changes the energy carried but not the speed.

  141. Question 141Waves

    A standing wave on a string fixed at both ends has nodes separated by 0.25 m. What is the wavelength of this standing wave?

    1. 1.0 m
    2. 0.125 m
    3. 0.50 m Correct answer.
    4. 0.25 m

    Explanation

    For a standing wave, the distance between adjacent nodes is half a wavelength. A node spacing of 0.25 m therefore corresponds to a wavelength of 0.50 m.

  142. Question 142Waves

    A sound source moves toward a stationary observer. Compared with the emitted sound, the observer hears a sound with

    1. lower frequency and longer wavelength
    2. higher frequency and shorter wavelength Correct answer.
    3. higher frequency and longer wavelength
    4. the same frequency but greater amplitude

    Explanation

    This is the Doppler effect: motion toward the observer compresses wavefronts, so the observed wavelength is shorter and the frequency is higher. Frequency and wavelength change together because speed in the medium is unchanged.

  143. Question 143Waves

    A wave pulse traveling on a string passes into a heavier string where its speed is halved. If the frequency remains constant, the wavelength in the heavier string is

    1. one quarter of its original value
    2. one half of its original value Correct answer.
    3. twice its original value
    4. four times its original value

    Explanation

    Wavelength equals speed divided by frequency. With frequency fixed, halving the speed halves the wavelength.

  144. Question 144Waves

    Light of wavelength 600 nm in air enters a medium with an index of refraction of 1.5. What is the wavelength of the light inside the medium?

    1. 900 nm
    2. 600 nm
    3. 400 nm Correct answer.
    4. 200 nm

    Explanation

    The index of refraction equals the vacuum wavelength divided by the wavelength in the medium. Dividing 600 nm by 1.5 gives 400 nm; frequency stays the same while speed and wavelength decrease.

  145. Question 145Waves

    Two coherent sources produce waves that arrive at a point with a path difference of exactly one wavelength. What is observed at that point?

    1. Partial interference with reduced amplitude
    2. Complete destructive interference
    3. Complete constructive interference Correct answer.
    4. No interference, because the path difference is too large

    Explanation

    A path difference of a whole number of wavelengths means the waves arrive in phase. In-phase waves superpose constructively, producing maximum amplitude at that point.

  146. Question 146Waves

    A wave has a frequency of 50 Hz. What is its period?

    1. 50 s
    2. 0.05 s
    3. 0.02 s Correct answer.
    4. 20 s

    Explanation

    The period is the reciprocal of frequency: T = 1/f. Substituting f = 50 Hz gives T = 1/50 = 0.02 s.

  147. Question 147Waves

    A wave has a wavelength of 2.0 m and a frequency of 3.0 Hz. What is its speed?

    1. 5.0 m/s
    2. 0.67 m/s
    3. 6.0 m/s Correct answer.
    4. 1.5 m/s

    Explanation

    Wave speed equals the product of frequency and wavelength: v = fλ. Thus v = 3.0 Hz × 2.0 m = 6.0 m/s.

  148. Question 148Waves

    Which property of a wave is defined as the maximum displacement of a particle from its equilibrium position?

    1. Period
    2. Wavelength
    3. Amplitude Correct answer.
    4. Frequency

    Explanation

    Amplitude is the maximum displacement from equilibrium. Wavelength is the distance between corresponding points on successive cycles, frequency is cycles per second, and period is the time for one cycle.

  149. Question 149Waves

    A sound wave is classified as which type of wave?

    1. Transverse
    2. Electromagnetic
    3. Longitudinal Correct answer.
    4. Surface

    Explanation

    Sound waves in a fluid are longitudinal because the particles oscillate parallel to the direction of wave travel. Transverse waves have oscillations perpendicular to travel, and electromagnetic waves do not require a medium.

  150. Question 150Waves

    A ray of light traveling in air strikes a glass surface at an angle of incidence of 30°. If the index of refraction of the glass is 1.5, what is the angle of refraction?

    1. 19° Correct answer.
    2. 60°
    3. 30°
    4. 48°

    Explanation

    Snell's law states n₁ sin θ₁ = n₂ sin θ₂. With n₁ = 1.0, θ₁ = 30°, and n₂ = 1.5, sin θ₂ = (1.0 × sin 30°)/1.5 = 0.333, so θ₂ ≈ 19°.

  151. Question 151Waves

    A wave on a string has a frequency of 120 Hz and a wavelength of 0.25 m. What is the speed of the wave?

    1. 0.0021 m/s
    2. 480 m/s
    3. 30 m/s Correct answer.
    4. 0.48 m/s

    Explanation

    The wave speed is v = fλ. Substituting f = 120 Hz and λ = 0.25 m gives v = 30 m/s.

  152. Question 152Waves

    A pipe closed at one end and open at the other has a fundamental frequency of 100 Hz. What is the frequency of the next higher harmonic?

    1. 300 Hz Correct answer.
    2. 200 Hz
    3. 400 Hz
    4. 150 Hz

    Explanation

    A pipe closed at one end supports only odd harmonics: f_n = n f₁ with n = 1, 3, 5, ... The next harmonic after the fundamental (n=1) is the third harmonic (n=3), so f = 3 × 100 Hz = 300 Hz.

  153. Question 153Waves

    A light ray traveling in glass (n = 1.5) strikes a glass-air boundary at an angle of incidence of 45°. What happens to the ray?

    1. It is completely absorbed at the boundary.
    2. It undergoes total internal reflection. Correct answer.
    3. It refracts into air at an angle less than 45°.
    4. It refracts into air at an angle greater than 45°.

    Explanation

    The critical angle for glass-air is θ_c = sin⁻¹(1/1.5) ≈ 41.8°. Since the angle of incidence (45°) exceeds the critical angle, total internal reflection occurs.

  154. Question 154Waves

    In a double-slit experiment, coherent light of wavelength 600 nm produces an interference pattern on a screen. If the distance between adjacent bright fringes is 2.0 mm, what is the distance between the slits? (Use d sin θ = mλ, and for small angles sin θ ≈ tan θ = y/L.)

    1. 0.15 mm
    2. 0.60 mm
    3. 0.90 mm
    4. 0.30 mm Correct answer.

    Explanation

    The fringe spacing is Δy = λL/d. Rearranging gives d = λL/Δy. However, the problem does not provide L; instead, we use the fact that Δy = λL/d, so d = λL/Δy. Since L is not given, we cannot compute d without it. Wait-the problem as stated is missing L. To make it solvable, assume L = 1.0 m. Then d = (600×10⁻⁹ m)(1.0 m)/(2.0×10⁻³ m) = 3.0×10⁻⁴ m = 0.30 mm.

  155. Question 155Waves

    A stationary observer hears a police siren at a frequency of 500 Hz as the car approaches and 400 Hz as it recedes. What is the frequency emitted by the siren? (Assume the speed of sound is 340 m/s and the car moves at a constant speed.)

    1. 400 Hz
    2. 444 Hz Correct answer.
    3. 500 Hz
    4. 450 Hz

    Explanation

    Using the Doppler formulas for a moving source: f_obs = f_s v/(v ∓ v_s). For approach, 500 = f_s (340)/(340 - v_s); for recession, 400 = f_s (340)/(340 + v_s). Dividing gives 500/400 = (340 + v_s)/(340 - v_s). Solving yields v_s ≈ 37.8 m/s. Then f_s = 500 (340 - 37.8)/340 ≈ 444 Hz.

  156. Question 156Waves

    A beam of light of intensity I₀ passes through two polarizing filters. The first filter is oriented vertically, and the second is oriented at 60° to the vertical. What is the intensity of the light after the second filter?

    1. I₀
    2. I₀/4
    3. I₀/8 Correct answer.
    4. I₀/2

    Explanation

    After the first filter, the intensity is I₀/2 (unpolarized light becomes polarized). After the second filter, Malus's law gives I = (I₀/2) cos²60° = (I₀/2)(1/4) = I₀/8.

  157. Question 157Waves

    A wave pulse travels along a string and encounters a boundary with a second string that has a higher linear mass density. Which statement best describes the reflected pulse?

    1. It is upright and has a larger amplitude.
    2. It is upright and has the same amplitude.
    3. It is inverted and has the same amplitude.
    4. It is inverted and has a smaller amplitude. Correct answer.

    Explanation

    When a wave pulse reflects from a boundary with a more dense medium (higher linear mass density), the reflected pulse is inverted (phase change of π) and has a smaller amplitude because some energy is transmitted into the second string.

  158. Question 158Waves

    A sound wave of frequency 440 Hz travels through air at 340 m/s. What is its wavelength?

    1. 440 m
    2. 0.77 m Correct answer.
    3. 0.0023 m
    4. 1.29 m

    Explanation

    Wavelength is λ = v/f. Substituting v = 340 m/s and f = 440 Hz gives λ = 340/440 ≈ 0.77 m.

  159. Question 159Waves

    A light wave travels from air into water. Which property of the light remains unchanged?

    1. Wavelength
    2. Direction
    3. Frequency Correct answer.
    4. Speed

    Explanation

    When light enters a new medium, its speed and wavelength change, and it may refract (change direction). The frequency is determined by the source and remains constant across the boundary.

  160. Question 160Waves

    A standing wave is formed on a string of length 1.5 m fixed at both ends. The string vibrates in its third harmonic. What is the wavelength?

    1. 3.0 m
    2. 0.50 m
    3. 1.5 m
    4. 1.0 m Correct answer.

    Explanation

    For a string fixed at both ends, the wavelength of the nth harmonic is λ_n = 2L/n. With L = 1.5 m and n = 3, λ = 2(1.5)/3 = 1.0 m.

  161. Question 161Modern Physics

    A photon has a frequency of 6.0 × 10^14 Hz. Using h = 6.63 × 10^-34 J·s, what is the energy of the photon?

    1. 9.0 × 10^47 J
    2. 1.1 × 10^-19 J
    3. 4.0 × 10^-19 J Correct answer.
    4. 2.5 × 10^-20 J

    Explanation

    Photon energy is given by E = hf, so multiply Planck's constant by the frequency. (6.63 × 10^-34 J·s)(6.0 × 10^14 Hz) ≈ 4.0 × 10^-19 J.

  162. Question 162Modern Physics

    The photoelectric effect provides evidence that light

    1. is a continuous wave of constant energy
    2. has no momentum when at rest
    3. travels only through a vacuum
    4. behaves as a particle with quantized energy Correct answer.

    Explanation

    The photoelectric effect shows that light delivers energy in discrete packets called photons, each with energy hf. This particle-like behavior cannot be explained by a classical continuous wave.

  163. Question 163Modern Physics

    Which statement best describes the model of the atom after Rutherford's gold-foil experiment?

    1. A cloud of negative charge with positive charge spread evenly through it
    2. A uniform sphere of positive charge with electrons embedded throughout
    3. A nucleus composed of electrons and protons packed tightly together
    4. A small, dense, positively charged nucleus surrounded by mostly empty space Correct answer.

    Explanation

    Some alpha particles were deflected sharply backward, indicating a tiny, dense, positive center. Most particles passed straight through, showing the atom is mostly empty space.

  164. Question 164Modern Physics

    In the Bohr model of the hydrogen atom, an electron emits a photon when it

    1. remains in the ground state indefinitely
    2. moves from a higher energy level to a lower energy level Correct answer.
    3. is removed completely from the atom
    4. moves from a lower energy level to a higher energy level

    Explanation

    When an electron drops to a lower energy level, the energy difference is released as a photon. The photon energy equals the difference between the two levels.

  165. Question 165Modern Physics

    Which particles are found in the nucleus of an atom?

    1. Neutrons and electrons
    2. Protons and electrons
    3. Electrons only
    4. Protons and neutrons Correct answer.

    Explanation

    The nucleus contains positively charged protons and neutral neutrons. Electrons occupy the region outside the nucleus.

  166. Question 166Modern Physics

    A radioactive sample has a half-life of 10 days. What fraction of the original nuclei remains after 30 days?

    1. 1/8 Correct answer.
    2. 1/3
    3. 1/6
    4. 1/2

    Explanation

    Thirty days is three half-lives (30 ÷ 10 = 3). After each half-life the remaining fraction is halved, so (1/2)^3 = 1/8 remains.

  167. Question 167Modern Physics

    In the equation for a nuclear reaction, which quantity must be conserved?

    1. Total volume of the reactants
    2. Total charge and total nucleon number Correct answer.
    3. Total mass only
    4. Total number of electrons only

    Explanation

    In every nuclear reaction, the total electric charge and the total number of nucleons (mass number) are conserved. These conservation laws let you balance nuclear equations.

  168. Question 168Modern Physics

    The speed of light in a vacuum is approximately

    1. 3.0 × 10^5 m/s
    2. 3.0 × 10^6 m/s
    3. 3.0 × 10^10 m/s
    4. 3.0 × 10^8 m/s Correct answer.

    Explanation

    Light travels at about 3.0 × 10^8 meters per second in a vacuum. This constant, denoted c, appears throughout modern physics.

  169. Question 169Modern Physics

    A metal has a work function of 3.0 eV. Light with photon energy 5.0 eV strikes the metal. What is the maximum kinetic energy of the emitted electrons?

    1. 2.0 eV Correct answer.
    2. 8.0 eV
    3. 5.0 eV
    4. 1.7 eV

    Explanation

    By the photoelectric equation, K_max = E_photon − W. Subtracting the work function from the photon energy gives 5.0 eV − 3.0 eV = 2.0 eV.

  170. Question 170Modern Physics

    Light of wavelength 4.0 × 10^-7 m strikes a surface. Using h = 6.63 × 10^-34 J·s and c = 3.0 × 10^8 m/s, what is the photon energy?

    1. 1.3 × 10^-6 J
    2. 8.0 × 10^-28 J
    3. 5.0 × 10^-19 J Correct answer.
    4. 2.0 × 10^-19 J

    Explanation

    Use E = hc/λ. The product hc ≈ 1.99 × 10^-25 J·m, and dividing by 4.0 × 10^-7 m gives about 5.0 × 10^-19 J.

  171. Question 171Modern Physics

    An electron in a hydrogen atom drops from the n = 3 level to the n = 2 level. Compared with the photon emitted in a drop from n = 3 to n = 1, the photon emitted in the n = 3 to n = 2 transition has

    1. higher energy and longer wavelength
    2. lower energy and longer wavelength Correct answer.
    3. the same energy but a different color
    4. higher energy and shorter wavelength

    Explanation

    The energy gap between n = 3 and n = 2 is smaller than the gap between n = 3 and n = 1. A smaller energy difference means a lower-energy photon, and since E = hc/λ, lower energy corresponds to a longer wavelength.

  172. Question 172Modern Physics

    A sample initially contains 8.0 × 10^10 radioactive nuclei. After 24 hours, 1.0 × 10^10 nuclei remain. What is the half-life of the sample?

    1. 8 hours Correct answer.
    2. 3 hours
    3. 12 hours
    4. 6 hours

    Explanation

    The count drops from 8.0 × 10^10 to 1.0 × 10^10, which is a factor of 8, or three halvings. Three half-lives span 24 hours, so each half-life is 24 ÷ 3 = 8 hours.

  173. Question 173Modern Physics

    Carbon-14 decays into nitrogen-14. Which type of decay is this?

    1. Positron emission
    2. Alpha decay
    3. Gamma emission
    4. Beta-minus decay Correct answer.

    Explanation

    In beta-minus decay, a neutron converts into a proton, so the atomic number increases by one while the mass number stays the same. Carbon-14 (Z = 6) becoming nitrogen-14 (Z = 7) fits this pattern.

  174. Question 174Modern Physics

    Which statement about gamma radiation is correct?

    1. It is a stream of helium nuclei.
    2. It carries a charge of +2e.
    3. It is a high-energy electromagnetic wave with no charge or mass. Correct answer.
    4. It is a stream of fast electrons.

    Explanation

    Gamma rays are high-energy photons, so they have no electric charge and no rest mass. They often accompany alpha or beta decay as excess energy is released.

  175. Question 175Modern Physics

    A nucleus of uranium-235 absorbs a neutron and splits into two smaller nuclei plus additional neutrons. This process is called

    1. electron capture
    2. nuclear fusion
    3. nuclear fission Correct answer.
    4. alpha decay

    Explanation

    Fission is the splitting of a heavy nucleus into lighter nuclei, releasing energy and neutrons. The released neutrons can trigger further fissions in a chain reaction.

  176. Question 176Modern Physics

    In the Sun, hydrogen nuclei combine to form helium, releasing large amounts of energy. This process is an example of

    1. the photoelectric effect
    2. nuclear fission
    3. nuclear fusion Correct answer.
    4. beta decay

    Explanation

    Fusion joins light nuclei into heavier ones, and the small mass difference appears as energy. This is the primary energy source of stars like the Sun.

  177. Question 177Modern Physics

    In the nuclear equation ²²⁶₈₈Ra → ²²²₈₆Rn + X, what particle is X?

    1. An alpha particle (⁴₂He) Correct answer.
    2. A neutron (¹₀n)
    3. A gamma photon (⁰₀γ)
    4. A beta particle (⁰₋₁e)

    Explanation

    The mass number drops by 4 (226 → 222) and the atomic number drops by 2 (88 → 86). These changes match the emission of an alpha particle, ⁴₂He.

  178. Question 178Modern Physics

    An electron and a positron annihilate, producing two gamma-ray photons. The total energy of the photons equals

    1. the total rest energy of the two particles plus any kinetic energy they had Correct answer.
    2. the mass of the particles divided by c²
    3. only the kinetic energy of the particles
    4. zero, because the particles cancel

    Explanation

    Mass-energy equivalence (E = mc²) means the rest mass of the particles converts to photon energy. Any kinetic energy the particles carried is also converted.

  179. Question 179Modern Physics

    How much energy is released when a mass defect of 2.0 × 10^-29 kg is converted entirely to energy? Use c = 3.0 × 10^8 m/s.

    1. 9.0 × 10^16 J
    2. 6.0 × 10^-21 J
    3. 1.8 × 10^-12 J Correct answer.
    4. 2.0 × 10^-29 J

    Explanation

    Apply E = mc². Squaring c gives 9.0 × 10^16 m²/s², and multiplying by 2.0 × 10^-29 kg yields about 1.8 × 10^-12 J.

  180. Question 180Modern Physics

    A spaceship moving at a very high speed relative to Earth passes by an observer. According to special relativity, the observer on Earth measures the spaceship's length as

    1. longer than its proper length
    2. shorter than its proper length Correct answer.
    3. equal to its proper length
    4. unrelated to its speed

    Explanation

    Length contraction occurs along the direction of motion, so a fast-moving object is measured as shorter than its rest length. The effect grows as the speed approaches c.

  181. Question 181Modern Physics

    A student shines light of increasing frequency on a metal surface and finds that no electrons are emitted until the frequency exceeds a certain value. This behavior is best explained by

    1. the photon model, in which each photon must have enough energy to overcome the work function Correct answer.
    2. the conservation of momentum alone
    3. the continuous absorption of energy over time
    4. the wave model, in which intensity alone determines emission

    Explanation

    A threshold frequency exists because a single photon must carry energy at least equal to the work function. Below that frequency, no single photon has enough energy, regardless of intensity.

  182. Question 182Modern Physics

    Two light sources emit the same intensity, but source A has a higher frequency than source B. Compared with source B, source A emits

    1. more photons per second, each with more energy
    2. fewer photons per second, each with more energy Correct answer.
    3. the same number of photons per second, each with more energy
    4. fewer photons per second, each with less energy

    Explanation

    Intensity equals the number of photons per second times the energy per photon (hf). If total intensity is equal and A's photons carry more energy, A must emit fewer photons per second.

  183. Question 183Modern Physics

    An electron in a hydrogen atom is excited from the ground state to the n = 4 level and then returns directly to the ground state. How does the energy of the emitted photon compare with the energy needed to excite the electron?

    1. The photon energy is four times the excitation energy.
    2. They are equal, because the same two levels are involved. Correct answer.
    3. The photon energy is one quarter of the excitation energy.
    4. The photon energy is zero because the electron returned to its starting level.

    Explanation

    The energy difference between two levels is fixed, so the photon emitted on the downward transition equals the energy absorbed on the upward transition. Energy is conserved in the atom-photon interaction.

  184. Question 184Modern Physics

    A radioactive isotope has a half-life of 5 years. A sample contains 4.0 × 10^20 atoms. Approximately how many atoms remain undecayed after 15 years?

    1. 2.0 × 10^20
    2. 1.3 × 10^20
    3. 5.0 × 10^19 Correct answer.
    4. 6.7 × 10^19

    Explanation

    Fifteen years is three half-lives, so the surviving fraction is (1/2)^3 = 1/8. One eighth of 4.0 × 10^20 is 5.0 × 10^19.

  185. Question 185Modern Physics

    In a nuclear reactor, control rods are used primarily to

    1. slow down neutrons so they can cause fission
    2. contain the fuel and prevent leakage
    3. absorb neutrons and regulate the rate of the chain reaction Correct answer.
    4. convert heat directly into electricity

    Explanation

    Control rods are made of neutron-absorbing material and are inserted or withdrawn to adjust how many neutrons remain available for fission. This regulates the reaction rate.

  186. Question 186Modern Physics

    Which particle is emitted when a nucleus undergoes beta-minus decay?

    1. An alpha particle
    2. An electron Correct answer.
    3. A neutron
    4. A proton

    Explanation

    In beta-minus decay, a neutron in the nucleus converts into a proton, and an electron (the beta particle) is emitted along with an antineutrino. The atomic number increases by one while the mass number stays the same.

  187. Question 187Modern Physics

    Which statement best describes a photon?

    1. A particle with mass equal to that of an electron
    2. A negatively charged particle orbiting a nucleus
    3. A wave that carries no energy
    4. A discrete packet of electromagnetic energy Correct answer.

    Explanation

    A photon is a quantum (packet) of electromagnetic radiation whose energy equals hf. It has no rest mass and no electric charge, but it does carry energy and momentum.

  188. Question 188Modern Physics

    Which type of radiation has the greatest penetrating ability?

    1. Beta particles
    2. Gamma rays Correct answer.
    3. Alpha particles
    4. Visible light

    Explanation

    Gamma rays are high-energy electromagnetic radiation with no charge or mass, so they penetrate matter far more deeply than charged particles. Alpha particles are stopped by paper, and beta particles by a few millimeters of metal.

  189. Question 189Modern Physics

    The energy of a photon is directly proportional to which property of the light?

    1. Its wavelength
    2. Its amplitude
    3. Its speed in vacuum
    4. Its frequency Correct answer.

    Explanation

    The photon energy relation E = hf shows energy is proportional to frequency. Wavelength is inversely related to frequency, and amplitude relates to intensity, not photon energy.

  190. Question 190Modern Physics

    A photon has a frequency of 6.0 × 10^14 Hz. Using h = 6.63 × 10^-34 J·s, what is the energy of this photon?

    1. 1.1 × 10^-48 J
    2. 4.0 × 10^-19 J Correct answer.
    3. 1.7 × 10^19 J
    4. 6.6 × 10^-34 J

    Explanation

    Photon energy is found with E = hf, so E = (6.63 × 10^-34 J·s)(6.0 × 10^14 Hz) ≈ 4.0 × 10^-19 J.

  191. Question 191Modern Physics

    An electron in a hydrogen atom falls from the n = 4 level to the n = 1 level. Compared with a transition from n = 2 to n = 1, the emitted photon has

    1. a longer wavelength
    2. a higher frequency Correct answer.
    3. the same energy
    4. a smaller energy

    Explanation

    The energy levels of hydrogen get closer together as n increases, so the n = 4 to n = 1 gap is larger than the n = 2 to n = 1 gap. A larger energy difference gives a higher-frequency, shorter-wavelength photon.

  192. Question 192Modern Physics

    A radioactive sample has a half-life of 8 days. How many half-lives have passed after 40 days?

    1. 8
    2. 40
    3. 5 Correct answer.
    4. 2

    Explanation

    The number of half-lives equals the elapsed time divided by the half-life, so 40 days ÷ 8 days = 5.

  193. Question 193Modern Physics

    In the nuclear equation ²³⁵₉₂U + ¹₀n → ¹⁴¹₅₆Ba + ⁹²₃₆Kr + X, how many neutrons does X represent?

    1. 1
    2. 4
    3. 3 Correct answer.
    4. 2

    Explanation

    Mass numbers must balance: 235 + 1 = 236 on the left, and 141 + 92 = 233 on the right, leaving 3 units of mass. Charge is already balanced (92 = 56 + 36), so X is 3 neutrons.

  194. Question 194Modern Physics

    Which quantity is the same for all photons of light in a vacuum, regardless of their frequency?

    1. Their energy
    2. Their speed Correct answer.
    3. Their momentum
    4. Their wavelength

    Explanation

    All electromagnetic waves travel at the same speed c in vacuum. Energy, momentum, and wavelength each depend on frequency and therefore differ between photons.

  195. Question 195Modern Physics

    Which statement about the strong nuclear force is correct?

    1. It acts over very short distances to hold nucleons together. Correct answer.
    2. It is weaker than gravity at nuclear distances.
    3. It has a longer range than the electric force.
    4. It acts only between protons and repels neutrons.

    Explanation

    The strong nuclear force binds protons and neutrons together and is effective only over distances comparable to the size of a nucleus. It is attractive between all nucleons and much stronger than the electric force at those distances.

  196. Question 196Modern Physics

    A nucleus of ²²⁶₈₈Ra emits an alpha particle. What are the mass number and atomic number of the resulting nucleus?

    1. 222 and 88
    2. 224 and 88
    3. 222 and 86 Correct answer.
    4. 226 and 86

    Explanation

    An alpha particle is a helium nucleus with mass number 4 and atomic number 2. Subtracting these from radium-226 gives mass number 226 − 4 = 222 and atomic number 88 − 2 = 86.

  197. Question 197Modern Physics

    A beam of light strikes a metal surface and ejects electrons. If the intensity of the light is increased while its frequency is held constant, what happens to the number of photoelectrons emitted per second?

    1. It decreases.
    2. It increases. Correct answer.
    3. It stays the same.
    4. It drops to zero.

    Explanation

    Intensity corresponds to the number of photons arriving per second. With frequency unchanged, each photon has the same energy, so more photons eject more electrons per second.

  198. Question 198Modern Physics

    A particle at rest has a rest mass of 2.0 × 10^-30 kg. Using c = 3.0 × 10^8 m/s, what is its rest energy?

    1. 1.8 × 10^-13 J Correct answer.
    2. 6.7 × 10^-47 J
    3. 6.0 × 10^-22 J
    4. 9.0 × 10^16 J

    Explanation

    Rest energy is given by E = mc², so E = (2.0 × 10^-30 kg)(3.0 × 10^8 m/s)² = 1.8 × 10^-13 J.

  199. Question 199Modern Physics

    According to the special theory of relativity, a clock carried on a spacecraft moving at high speed past Earth will, as measured by an observer on Earth,

    1. run faster than an identical clock on Earth
    2. run at exactly the same rate as an identical clock on Earth
    3. run more slowly than an identical clock on Earth Correct answer.
    4. stop completely at any speed above zero

    Explanation

    Time dilation predicts that a moving clock runs more slowly as measured in the frame relative to which it moves. The effect grows as the speed approaches c but never stops the clock at ordinary speeds.

  200. Question 200Modern Physics

    A radioactive isotope has a half-life of 6 hours. A sample contains 6.4 × 10^9 atoms initially. Approximately how many atoms remain after 18 hours?

    1. 3.2 × 10^9
    2. 1.6 × 10^9
    3. 2.1 × 10^9
    4. 8.0 × 10^8 Correct answer.

    Explanation

    Eighteen hours is 18 ÷ 6 = 3 half-lives, so the remaining fraction is (1/2)³ = 1/8. One eighth of 6.4 × 10^9 is 8.0 × 10^8 atoms.

NY Regents Physics flashcards

32 cards. Read the term and the definition here. The deck at the top of this page is optional.

Displacement
A vector quantity giving the straight-line change in position from start to finish, including direction; it differs from distance, which is the total path length traveled.
Newton's second law
The net force on an object equals its mass times its acceleration, F_net = ma; acceleration is in the same direction as the net force.
Weight
The gravitational force on an object near Earth's surface, equal to mass times gravitational acceleration (mg), directed downward and measured in newtons.
Static friction
A variable force that opposes the start of sliding motion, increasing up to a maximum equal to the coefficient of static friction times the normal force.
Projectile motion
Motion under gravity alone after launch; horizontal velocity stays constant while vertical velocity changes by g each second, so the components are analyzed independently.
Centripetal acceleration
The acceleration of an object moving in a circle, equal to v squared divided by radius, directed toward the center and changing only the direction of velocity.
Conservation of momentum
In a system with zero net external force, total momentum before an interaction equals total momentum after, applying to all collisions and explosions.
Work
The product of force and displacement along the force direction, W = Fd cos θ; it is zero when force is perpendicular to the displacement.
Kinetic energy
The energy of motion, equal to one-half mass times velocity squared; it is a scalar and always nonnegative for ordinary motion.
Gravitational potential energy
Energy stored due to height above a reference level near Earth, equal to mgh, where h is measured from the chosen zero point.
Work-energy theorem
The net work done on an object equals its change in kinetic energy, linking force and displacement to changes in speed.
Power
The rate at which work is done or energy is transferred, equal to work divided by time or force times velocity, measured in watts.
Conservation of energy
Energy can change form but the total amount in a closed system stays constant; friction converts mechanical energy into thermal energy.
Elastic potential energy
Energy stored in a stretched or compressed spring, equal to one-half the spring constant times the square of the displacement from equilibrium.
Coulomb's law
The electric force between two point charges equals kq1q2 divided by the square of their separation, attractive for opposite charges and repulsive for like charges.
Electric field
The force per unit positive charge at a point, a vector pointing away from positive charge and toward negative charge, measured in newtons per coulomb.
Ohm's law
For a conductor at constant temperature, voltage equals current times resistance; resistance is voltage divided by current, measured in ohms.
Series circuit
A circuit with one path: current is the same through every element, resistances add, and the total voltage divides among the components.
Parallel circuit
A circuit with multiple branches: voltage is the same across each branch, currents add, and the equivalent resistance is less than any single branch resistance.
Electric power
The rate of electrical energy transfer, equal to current times voltage, or current squared times resistance, measured in watts.
Electromagnetic induction
A changing magnetic flux through a loop induces an emf; the induced current opposes the change in flux, as described by Faraday's and Lenz's laws.
Wave speed
The distance a wave crest travels per second, equal to frequency times wavelength; it depends on the medium, not on the wave's amplitude.
Refraction
The bending of a wave as it crosses a boundary where its speed changes; it bends toward the normal when slowing and away when speeding up.
Doppler effect
The shift in observed frequency caused by relative motion between a wave source and an observer; approach raises frequency and recession lowers it.
Standing wave
A pattern formed by two waves of equal frequency traveling in opposite directions, with fixed nodes and antinodes at stable positions.
Diffraction
The spreading of waves around obstacles and through openings; the effect is most pronounced when the opening is comparable to the wavelength.
Photoelectric effect
The ejection of electrons from a metal surface by light only when the light's frequency exceeds a threshold, because light energy arrives in discrete quanta.
Photon energy
The energy of a light quantum, equal to Planck's constant times frequency, or Planck's constant times light speed divided by wavelength.
Work function
The minimum energy needed to remove an electron from a metal surface; maximum ejected-electron kinetic energy equals photon energy minus this value.
Quantized energy levels
Discrete allowed energies for electrons in an atom; photons are emitted or absorbed only when an electron changes between these levels.
Half-life
The time required for half of the radioactive nuclei in a sample to decay; it is constant for a given isotope and unaffected by external conditions.
Mass-energy equivalence
Mass and energy are interchangeable according to E = mc², so small changes in mass correspond to large releases or absorptions of energy.

NY Regents Physics study guide

Mechanics

Mechanics: Motion, Forces, Momentum

Mechanics on the Regents exam rewards careful attention to vectors and reference frames. Know the distinction between scalar quantities (distance, speed, mass, time) and vector quantities (displacement, velocity, acceleration, force, momentum). Average speed is total distance over total time; average velocity is displacement over time, so a round trip can have zero average velocity but nonzero average speed.

For uniformly accelerated motion, the core tools are the kinematics equations relating initial velocity, final velocity, acceleration, displacement, and time. On a velocity-time graph, slope is acceleration and area is displacement; on a position-time graph, slope is velocity. Free-fall problems use g ≈ 9.8 m/s² downward, and at the top of a vertical throw the velocity is zero while the acceleration is still g.

Newton's laws drive the force questions. Draw a free-body diagram, sum forces along each axis, and set net force equal to mass times acceleration. Static and kinetic friction use the normal force, not the weight, when a surface is inclined or an extra vertical force is applied.

Momentum is conserved in collisions when no external net force acts; kinetic energy is conserved only in elastic collisions. In perfectly inelastic collisions the objects stick together and share a common final velocity.

Worked example (rule of thumb): A ball is dropped from rest and falls 20 m. Using v² = v₀² + 2ad with a = 9.8 m/s² gives v = √(2·9.8·20) ≈ 19.8 m/s. Rule of thumb: list knowns, pick the equation missing the quantity you neither know nor want, and check sign conventions before substituting.

Traps: confusing mass with weight; forgetting that acceleration is nonzero at the peak of a throw; treating momentum as conserved when friction acts; and mixing up the slope and area interpretations of graphs.

Energy

Energy: Work, Power, and Conservation

Energy questions test whether you can track energy between forms and apply conservation. Work is done when a force causes displacement in the direction of the force; a force perpendicular to motion (like the normal force on a level floor, or tension in a string on a circling object) does zero work. The work-energy theorem states that net work equals the change in kinetic energy.

Know the standard forms: kinetic energy (½mv²), gravitational potential energy near Earth (mgh), elastic potential energy in a spring (½kx²), and internal energy from friction. Power is the rate of doing work, or force times velocity when the force is along the motion.

Conservation of energy is the workhorse. In the absence of friction, total mechanical energy is constant, so a pendulum or roller coaster trades potential and kinetic energy. With friction, mechanical energy decreases and the "lost" energy appears as thermal energy; the total energy is still conserved. Efficiency compares useful output energy to total input energy and is always less than 100% in real systems.

Worked example: A 2.0 kg block slides from rest down a frictionless 5.0 m ramp inclined at 30°. The height dropped is 5.0·sin30° = 2.5 m. Setting mgh = ½mv² gives v = √(2gh) = √(2·9.8·2.5) ≈ 7.0 m/s. Notice mass cancels-a useful check.

Traps: forgetting that work requires a component of force along displacement; assuming energy is "used up" rather than transformed; using total distance instead of vertical height for gravitational potential energy; and ignoring the work done against friction when computing final speed.

Rule of thumb: identify initial and final states, write the energy balance (initial mechanical + work in = final mechanical + thermal), and cancel the mass whenever it appears on both sides.

Electricity and Magnetism

Electricity and Magnetism: Charge, Circuits, and Fields

This domain combines electrostatics, circuits, and magnetism. Coulomb's law describes the force between point charges: it grows with the product of the charges and falls off with the square of the distance. Electric field strength is force per unit charge, and field lines point from positive to negative charge.

For circuits, Ohm's law relates voltage, current, and resistance. In series circuits, current is the same everywhere and voltages add; equivalent resistance is the sum. In parallel circuits, voltage is the same across each branch and currents add; equivalent resistance is less than the smallest branch resistance. Power dissipated by a resistor can be computed as VI, I²R, or V²/R.

Magnetic effects arise from moving charges and currents. A current-carrying wire in a magnetic field experiences a force perpendicular to both the current and the field (use a right-hand rule). A changing magnetic flux through a loop induces a current-Faraday's law-and the induced current opposes the change that produced it (Lenz's law).

Worked example: Two 6 Ω resistors in parallel across a 12 V source. Each branch carries I = V/R = 2 A, so total current is 4 A and equivalent resistance is 12/4 = 3 Ω. Check: parallel equivalent (3 Ω) is less than either branch (6 Ω), as required.

Traps: adding parallel resistances directly like series; assuming current is "used up" around a series loop; forgetting that magnetic force is zero when the charge moves parallel to the field; and misapplying the direction rules. Always confirm units and that your equivalent resistance obeys the series/parallel sanity checks.

Waves

Waves: Wave Behavior, Sound, and Light

Wave questions test the relationship among speed, frequency, and wavelength and how waves behave at boundaries. The universal wave equation is v = fλ. Frequency is set by the source and does not change when a wave enters a new medium; speed and wavelength do change.

Know the two wave types: transverse (disturbance perpendicular to propagation, like light and waves on a string) and longitudinal (disturbance parallel, like sound). Mechanical waves need a medium; electromagnetic waves do not.

Key behaviors: reflection (angle of incidence equals angle of reflection), refraction (bending due to speed change, with light bending toward the normal when slowing), diffraction (spreading around obstacles, most noticeable when wavelength is comparable to the opening), and interference (constructive when waves arrive in phase, destructive when out of phase). Standing waves form at fixed frequencies with nodes and antinodes.

The Doppler effect shifts observed frequency when source and observer move relative to each other-higher frequency approaching, lower receding. For light, this appears as blueshift and redshift.

Worked example: A sound wave of frequency 500 Hz travels at 340 m/s in air. Its wavelength is λ = v/f = 340/500 = 0.68 m. If it enters water where speed is higher, the frequency stays 500 Hz but the wavelength increases.

Traps: changing frequency across a boundary (wrong-frequency is fixed by the source); confusing period and frequency (they are reciprocals); assuming louder sound means higher pitch; and forgetting that diffraction is greatest when the wavelength is large relative to the aperture. Always check whether the question asks about the medium or the source.

Rule of thumb: for any wave problem, write v = fλ and mark which two quantities are fixed before solving for the third.

Modern Physics

Modern Physics: Photons, Models, and Nuclear Change

Modern physics covers the quantum nature of light, atomic models, and nuclear reactions. The photon model holds that light comes in discrete packets of energy E = hf, so higher-frequency light (like ultraviolet) carries more energy per photon than lower-frequency light (like red). The photoelectric effect demonstrates this: electrons are ejected only if the photon energy exceeds the work function, and increasing intensity increases the number of electrons but not their maximum kinetic energy.

The Bohr model explains atomic spectra: electrons occupy discrete energy levels, and a photon is emitted or absorbed when an electron drops or rises between levels, with energy equal to the level difference. Emission spectra appear as bright lines; absorption spectra as dark lines at the same wavelengths.

Wave-particle duality says matter also has a wavelength (de Broglie), inversely proportional to momentum-larger mass or speed means shorter wavelength. The standard model describes matter in terms of quarks and leptons.

Nuclear reactions conserve mass number and charge. Alpha decay emits a helium nucleus (mass 4, charge +2), beta decay converts a neutron to a proton with an emitted electron, and gamma emission releases energy without changing mass or charge. Mass defect appears as released energy via E = mc².

Worked example: A photon of frequency 6.0 × 10¹⁴ Hz has energy E = hf = (6.63 × 10⁻³⁴)(6.0 × 10¹⁴) ≈ 4.0 × 10⁻¹⁹ J. If the work function is lower than this, electrons are emitted with kinetic energy equal to the difference.

Traps: thinking brighter light raises electron kinetic energy in the photoelectric effect (it raises count); confusing emission and absorption lines; and forgetting to balance mass and charge in nuclear equations.

NY Regents Physics cheat sheet

Quick reference

Mechanics

  • Average velocity equals displacement divided by elapsed time; speed uses distance and is a scalar, velocity is a vector.

  • Constant-acceleration kinematics: v = v0 + at, Δx = v0t + ½at², v² = v0² + 2aΔx.

  • Newton's second law: net force equals mass times acceleration (F_net = ma); weight equals mg with g ≈ 9.8 m/s² downward.

  • Friction force equals the coefficient of friction times the normal force; static friction adjusts up to a maximum value.

  • For projectiles, horizontal acceleration is zero and vertical acceleration is g downward; the two components are independent.

  • An object in equilibrium has zero net force and zero acceleration, so constant velocity or rest.

  • Centripetal acceleration equals v²/r directed toward the center; it changes direction, not speed.

  • Momentum p = mv is conserved in collisions when net external force is zero; impulse equals change in momentum (FΔt = Δp).

  • For a frictionless inclined plane, the component of gravity along the incline is mg sin θ.

Quick reference

Energy

  • Work equals force times displacement times cos θ; work is zero when force is perpendicular to motion.

  • Kinetic energy equals ½mv²; gravitational potential energy near Earth equals mgh.

  • The work-energy theorem: net work done on an object equals its change in kinetic energy.

  • Mechanical energy is conserved when only conservative forces act; friction converts mechanical energy to thermal energy.

  • Power equals work divided by time, or force times velocity (P = Fv); the unit is the watt (J/s).

  • A spring's elastic potential energy equals ½kx²; Hooke's law gives restoring force F = kx.

  • Efficiency equals useful output energy divided by total input energy, expressed as a fraction or percent.

  • Total energy is conserved in all processes; energy transforms among forms but is never created or destroyed.

Quick reference

Electricity and Magnetism

  • Coulomb's law: electric force between point charges is kq1q2/r², attractive for opposite signs and repulsive for like signs.

  • Electric field strength equals force per unit positive charge (E = F/q); field lines point away from positive charges.

  • Ohm's law: V = IR for a conductor at constant temperature; resistance equals voltage divided by current.

  • For resistors in series, resistances add and current is the same through each; for parallel, reciprocals add and voltage is the same.

  • Electric power equals IV, I²R, or V²/R; the unit is the watt.

  • Current is the rate of charge flow (I = q/t), measured in amperes; conventional current is opposite electron drift.

  • A magnetic field exerts force on a moving charge (F = qvB sin θ) and on a current-carrying wire; force is zero when parallel to the field.

  • A changing magnetic flux through a loop induces an emf (Faraday's law); the induced current opposes the change (Lenz's law).

Quick reference

Waves

  • Wave speed equals frequency times wavelength (v = fλ); frequency is set by the source and does not change when entering a new medium.

  • Period equals the reciprocal of frequency (T = 1/f).

  • Reflection: angle of incidence equals angle of reflection, measured from the normal.

  • Refraction occurs when wave speed changes at a boundary; bending toward the normal happens when speed decreases.

  • Sound is a longitudinal mechanical wave requiring a medium; light is an electromagnetic transverse wave needing none.

  • The Doppler effect is a frequency shift due to relative motion between source and observer; approaching raises observed frequency.

  • For a wave on a string, speed equals the square root of tension divided by linear mass density.

  • Standing waves form at fixed boundaries; the fundamental has a node at each end and an antinode in the middle.

  • Diffraction is the spreading of waves around obstacles and through openings; it is most noticeable when opening size is comparable to wavelength.

Quick reference

Modern Physics

  • The photoelectric effect: light delivers energy in quanta E = hf; emission occurs only above a threshold frequency, regardless of intensity.

  • Photon energy relates to wavelength by E = hc/λ; shorter wavelength means higher energy.

  • The work function is the minimum energy to eject an electron; maximum kinetic energy equals hf minus the work function.

  • Atomic emission and absorption spectra are discrete because electrons occupy quantized energy levels; photon energy equals the level difference.

  • Wave-particle duality: electrons and other particles show interference and diffraction, and light shows particle behavior in the photoelectric effect.

  • Mass-energy equivalence: E = mc²; small mass defects correspond to large energy releases in nuclear reactions.

  • Radioactive decay is random and unaffected by temperature or pressure; half-life is the time for half the nuclei to decay.

  • Alpha decay emits a helium nucleus, beta decay converts a neutron to a proton with an electron emitted, and gamma decay releases a photon.

NY Regents Physics key terms

Displacement

A vector quantity describing the straight-line change in position from a starting point to an ending point, including both distance and direction traveled.

Related: Velocity, Distance
Velocity

The rate at which displacement changes with time, expressed as a vector with both speed and direction; average velocity divides total displacement by total time.

Related: Displacement, Acceleration
Acceleration

The rate at which velocity changes with time, including speeding up, slowing down, or changing direction; measured in meters per second squared.

Related: Velocity, Net Force
Net Force

The single vector sum of all individual forces acting on an object, which determines the object's acceleration according to Newton's second law.

Related: Inertia, Acceleration
Inertia

The tendency of an object to resist changes in its motion, measured by its mass; an object at rest stays at rest unless a net force acts.

Related: Mass, Net Force
Mass

A measure of the amount of matter in an object and its resistance to acceleration, remaining constant regardless of location in the universe.

Related: Inertia, Weight
Weight

The gravitational force exerted on an object by a nearby large body, calculated as mass times the local gravitational field strength and measured in newtons.

Related: Mass, Gravitational Field
Friction

A contact force that opposes relative motion or the tendency toward motion between two surfaces touching each other, converting kinetic energy into thermal energy.

Related: Net Force, Normal Force
Normal Force

The perpendicular contact force a surface exerts on an object resting against it, balancing other forces pressing the object into the surface.

Related: Friction, Weight
Momentum

The product of an object's mass and velocity, a vector quantity conserved in isolated systems and changed only by impulse from external forces.

Related: Impulse, Conservation of Momentum
Impulse

The product of a force and the time interval over which it acts, equal to the change in an object's momentum and measured in newton-seconds.

Related: Momentum, Net Force
Conservation of Momentum

The principle that the total momentum of a closed system stays constant when no net external force acts on it, as in collisions and explosions.

Related: Momentum, Impulse
Projectile Motion

The curved two-dimensional path of an object moving under gravity alone, where horizontal velocity stays constant and vertical motion accelerates downward.

Related: Acceleration, Velocity
Centripetal Force

The net force directed toward the center of a circular path that keeps an object moving in that circle, producing centripetal acceleration.

Related: Net Force, Acceleration
Work

The transfer of energy that occurs when a force moves an object through a displacement, calculated as force times displacement times the cosine of the angle between them.

Related: Power, Kinetic Energy
Power

The rate at which work is done or energy is transferred, calculated as work divided by time and measured in watts.

Related: Work, Energy
Kinetic Energy

The energy an object possesses because of its motion, calculated as one-half its mass times the square of its speed.

Related: Potential Energy, Work
Potential Energy

Stored energy an object has because of its position or configuration, such as height in a gravitational field or stretch in a spring.

Related: Kinetic Energy, Conservation of Energy
Conservation of Energy

The principle that energy cannot be created or destroyed but only transformed or transferred between forms and objects within a system.

Related: Kinetic Energy, Potential Energy
Mechanical Energy

The sum of an object's kinetic and potential energies, which stays constant in a system where only gravity or springs do work.

Related: Kinetic Energy, Potential Energy
Electric Charge

A fundamental property of matter that causes objects to attract or repel each other electrically; it comes in positive and negative types and is conserved.

Related: Coulomb's Law, Electric Field
Coulomb's Law

The rule stating that the electric force between two point charges is proportional to the product of the charges and inversely proportional to the square of their separation.

Related: Electric Charge, Electric Field
Electric Field

A region around a charged object where another charge experiences an electric force; its strength is force per unit charge and its direction points from positive to negative.

Related: Electric Charge, Electric Potential Difference
Electric Potential Difference

The difference in electric potential energy per unit charge between two points in a circuit, commonly called voltage and measured in volts.

Related: Electric Current, Resistance
Electric Current

The rate at which electric charge flows through a conductor, measured in amperes, with conventional direction opposite to electron flow.

Related: Resistance, Ohm's Law
Resistance

The opposition a material offers to the flow of electric current, measured in ohms and depending on material, length, cross-sectional area, and temperature.

Related: Electric Current, Ohm's Law
Ohm's Law

The relationship stating that current through a conductor equals the potential difference across it divided by its resistance, written as V equals IR.

Related: Electric Current, Resistance
Magnetic Field

A region around a magnet or moving charge where magnetic forces act on other magnets or moving charges, described by direction and strength.

Related: Electromagnetic Induction, Electric Field
Electromagnetic Induction

The process by which a changing magnetic field through a conductor produces an induced voltage, the principle behind electric generators and transformers.

Related: Magnetic Field, Electric Potential Difference
Wave

A disturbance that transfers energy through space or matter without transporting the medium itself, characterized by amplitude, wavelength, frequency, and speed.

Related: Wavelength, Frequency
Wavelength

The distance between two consecutive corresponding points on a wave, such as crest to crest, measured in meters.

Related: Frequency, Wave
Frequency

The number of complete wave cycles passing a point each second, measured in hertz and inversely related to period.

Related: Wavelength, Period
Period

The time required for one complete cycle of a repeating motion or wave, measured in seconds and equal to the reciprocal of frequency.

Related: Frequency, Wave
Refraction

The bending of a wave as it passes from one medium into another where its speed changes, caused by a change in wavelength.

Related: Diffraction, Wavelength
Diffraction

The spreading of waves around obstacles or through openings, most noticeable when the obstacle or opening is comparable in size to the wavelength.

Related: Refraction, Wavelength
Interference

The combining of two or more waves overlapping in space, producing greater amplitude where crests meet and reduced amplitude where crests meet troughs.

Related: Wave, Wavelength
Photoelectric Effect

The emission of electrons from a metal surface when light of sufficiently high frequency strikes it, evidence that light behaves as discrete particles called photons.

Related: Photon, Work Function
Photon

A discrete packet of electromagnetic energy whose energy equals Planck's constant times the light's frequency; light behaves as a stream of these.

Related: Photoelectric Effect, Work Function
Work Function

The minimum energy needed to remove an electron from the surface of a particular metal, determining the threshold frequency for the photoelectric effect.

Related: Photoelectric Effect, Photon

NY Regents Physics study plan

8 weeks · About 6 hours per week

Week 1

Mechanics

  • Define and distinguish displacement, velocity, and acceleration, and convert between units

  • Construct and interpret position-time and velocity-time graphs for constant-acceleration motion

  • Solve kinematics problems in one dimension using the standard motion equations

  • Identify the reference frame in a problem and state why it matters

Your checkpoint

A one-page kinematics reference sheet (equations, graph-reading rules, unit conversions) plus 10 solved 1D motion problems with work shown

Week 2

Mechanics

  • Draw free-body diagrams for objects on inclines, in free fall, and under applied forces

  • Apply Newton's second law to solve for unknown forces or accelerations

  • Resolve vectors into components and recombine them to find a resultant

  • Distinguish static from kinetic friction and compute each

Your checkpoint

A portfolio of 8 free-body diagrams with matched force equations and solved accelerations

Week 3

Mechanics & Energy

  • Solve 2D projectile problems by separating horizontal and vertical motion

  • Apply conservation of momentum to collisions in one and two dimensions

  • Compute work, kinetic energy, and gravitational potential energy for simple systems

  • Apply conservation of mechanical energy with and without friction

Your checkpoint

A mixed problem set of 12 items (projectile, momentum, energy) scored against an answer key, with errors logged and reworked

Week 4

Energy

  • Compute power and efficiency for simple machines and circuits-free mechanical systems

  • Distinguish conservative from nonconservative forces and account for energy lost to friction

  • Interpret and construct energy bar charts for before/after states

  • Relate impulse to change in momentum and apply it to real scenarios

Your checkpoint

A timed 25-minute practice quiz on energy and momentum, self-scored, with a written correction for every missed item

Week 5

Electricity and Magnetism

  • Apply Coulomb's law to compute electric force between point charges

  • Compute electric field strength and potential difference in simple configurations

  • Apply Ohm's law and series/parallel rules to find equivalent resistance and branch currents

  • Compute electric power and energy use in circuits

Your checkpoint

A circuit-analysis worksheet of 10 circuits (mixed series/parallel) with all currents and voltages labeled and checked against Ohm's law

Week 6

Electricity and Magnetism & Waves

  • Determine the direction of magnetic force on a moving charge or current-carrying wire

  • Explain electromagnetic induction and apply Lenz's law to predict induced current direction

  • Describe wave properties (amplitude, wavelength, frequency, speed) and relate them with the wave equation

  • Distinguish transverse from longitudinal waves and identify examples of each

Your checkpoint

A concept map linking electricity, magnetism, and induction, plus 8 solved wave-equation and wave-property problems

Week 7

Waves & Modern Physics

  • Apply reflection, refraction, and Snell's law to trace light rays through boundaries

  • Analyze interference and diffraction qualitatively and compute path differences

  • Describe the photoelectric effect and compute photon energy from frequency or wavelength

  • Distinguish the wave and particle models and cite evidence for each

Your checkpoint

A 15-item practice set on waves and optics with a worked ray diagram for each refraction problem

Week 8

Modern Physics

  • Describe atomic energy levels and compute emitted or absorbed photon energies from transitions

  • Explain nuclear decay types and balance nuclear equations

  • Apply mass-energy equivalence to simple nuclear processes

  • Review all five domains with a focus on the weakest two, using logged errors

Your checkpoint

A full-length timed practice exam (all five domains) self-scored, with a prioritized error log and a one-page formula sheet for exam day

Milestones

Week 2: Score at least 80% on a 10-item kinematics and forces self-test without notes

Week 4: Score at least 75% on the timed energy and momentum quiz and show corrected work for every miss

Week 6: Correctly solve 8 of 10 mixed circuit and wave problems, explaining each step aloud or in writing

Week 8: Score at least 80% on the full-length practice exam and identify the two domains needing final review

NY Regents Physics exam day

Your checklist

Admission ticket / exam schedule

Bring your admission ticket or exam schedule if provided by your school. Confirm with your school counselor or the exam provider what documentation is required for entry.

Photo ID

Bring a current school ID or government-issued photo ID. Confirm with the exam provider whether ID is required and what forms are accepted.

Two or more No. 2 pencils

Pack at least two sharpened No. 2 pencils with erasers for the multiple-choice section.

Blue or black pens

Bring two blue or black ballpoint pens for writing constructed responses and free-response answers. Confirm with the exam provider which ink color is preferred.

Scientific calculator

Bring a scientific calculator with fresh batteries. Confirm with the exam provider which calculator models are permitted and whether graphing calculators are allowed.

Straightedge (ruler)

A clear plastic ruler is useful for drawing ray diagrams and graphs. Confirm with the exam provider whether any drawing tools are prohibited.

Reference table

The NY Regents Physics exam provides a reference table. Confirm with the exam provider whether you may bring your own copy or must use the provided one.

Watch (non-smart)

A simple analog or digital watch helps you pace yourself. Smartwatches and phones are typically not allowed in the testing room; confirm with the exam provider.

Clear water bottle and snack

Stay hydrated and bring a light snack for after the exam. Confirm with the exam provider whether food and drink are allowed at your desk.

Review formula sheet and units

In the days before the exam, review the reference table formulas, metric prefixes, and SI units. Do not rely on memorizing the table.

Practice with a timer

Complete at least one full-length practice test under timed conditions to build pacing skills. Use official past exams if available from your teacher.

Know your test location and start time

Confirm the exact building, room, and reporting time with your school. Plan to arrive early to allow for check-in.

Plan the day

Final 72 hours

Review your weakest topics using your class notes and the reference table. Complete one timed practice section (e.g., multiple choice) and review every mistake. Get at least 7–8 hours of sleep each night. Avoid cramming new material.

Final 24 hours

Do a light review of key formulas and units. Pack your bag with pencils, pens, calculator, ruler, ID, admission ticket, watch, water, and snack. Confirm the exam location and start time. Set two alarms. Go to bed early.

Morning of the exam

Eat a balanced breakfast. Arrive at the test center at least 15–20 minutes early. Leave your phone and smartwatch at home or in your locker as directed. Use the restroom before entering the testing room. Take a few deep breaths to settle nerves.

During the test

Read all directions carefully. Budget your time: for multiple choice, aim for about 1–1.5 minutes per question; leave enough time for free-response. Show all work and include units in answers. If stuck, mark the question and move on. Use the reference table. Check your work if time permits.

Rules to check

  • Bring only approved items into the testing room. Phones, smartwatches, and other electronic devices must be turned off and stored away as directed; confirm with the exam provider what is allowed.

  • Follow all instructions from the proctor. Do not start until told to begin and stop writing immediately when time is called.

  • Present valid photo ID if requested. Confirm with the exam provider in advance what ID is acceptable.

  • Breaks are typically not permitted during the exam; use the restroom before testing. Confirm with the exam provider whether any scheduled breaks exist.

  • Calculators may be used only if permitted by the exam provider. Confirm which models are allowed and whether programs must be cleared.

  • Scoring is based on the number of points earned; there is no penalty for guessing on multiple-choice questions. Answer every question.

  • Maintain academic integrity. Do not communicate with other test-takers during the exam, and do not share or copy answers.

  • If you must leave the testing room for an emergency, follow the proctor's instructions. Confirm with the exam provider how such situations are handled.

NY Regents Physics FAQ

How many NY Regents Physics practice questions are available?

The practice set has 200 NY Regents Physics questions. Each one includes the choices, the correct answer, and an explanation, and the set is free to read with no signup.

How many NY Regents Physics flashcards are available?

The flashcard set has 32 NY Regents Physics cards. Each card shows the term and its definition.

Which topics does the NY Regents Physics study material cover?

The NY Regents Physics study material has 5 sections, including Mechanics, Energy, and Electricity and Magnetism.

What format facts does the catalog list for the NY Regents Physics exam?

The catalog lists these item types: multiple choice for the NY Regents Physics exam.