NFPA Firefighter I Practice Test

NFPA 1001 - Standard for Fire Fighter Professional Qualifications

NFPA Firefighter I overview

  • 199 practice questions
  • 32 flashcards
  • 2 study guide topics
  • 37 key terms

What you'll study

  • Fire Fighter I50%
  • Fire Fighter II50%

NFPA 1001, Standard for Fire Fighter Professional Qualifications, is the National Fire Protection Association document that identifies the minimum job performance requirements (JPRs) for career and volunteer fire fighters whose duties are primarily structural in nature. Its current edition is 2019, and the standard is listed by NFPA as Active. Candidates who study to this credential are typically entry-level career or volunteer fire fighters, recruit academy students, and the instructors and training officers who build recruit curricula around it. Because the standard is organized around job performance requirements, the material pairs a knowledge component with a demonstrated skill component: a candidate is expected not only to explain concepts but to perform the tasks under the conditions and to the standards the requirements describe. Preparation therefore usually combines reading the requirement language closely, working through the corresponding knowledge objectives, and repeated hands-on practice with an evaluator. Two practical points deserve attention. First, NFPA has combined this standard into the consolidated Standard NFPA 1010 under the Emergency Response and Responder Safety Document Consolidation Plan approved by the NFPA Standards Council, so the 2019 text is the last published edition of the content as a stand-alone standard, and the current consolidated text is located at NFPA 1010. Second, NFPA does not publish exam length, time limit, or passing score on the standard's development page; those details come from the authority that issues your certification.

Common mistakes

Reciting the fire triangle (fuel, oxygen, heat) as the complete model of combustion and stopping there - on questions about extinguishment, the candidate never accounts for the chemical chain reaction.

The triangle is taught first in school and in basic orientations, so it sticks as the 'right answer' and is recited reflexively even when the question is about breaking the combustion process.

What to do instead

Build the tetrahedron as a four-slot mental checklist (fuel, oxygen, heat, chain reaction) and practise matching extinguishment methods to each slot - cooling removes heat, smothering removes oxygen, separating removes fuel, chemical agents interrupt the chain reaction. Before answering, name which slot the question is describing.

Treating flashover and backdraft as interchangeable 'sudden fire events', or placing both in the growth stage, so answers about smoke indicators and control measures come out reversed.

Both are described as rapid, violent changes in fire behaviour, and candidates memorise the dramatic description without attaching it to a stage of fire development or to the controlling variable.

What to do instead

Anchor each event to two facts. Flashover: growth into fully developed, fuel/heat-controlled, rapid simultaneous ignition of contents, driven by heat buildup. Backdraft: decay stage of a ventilation-limited fire, oxygen-controlled, driven by air being admitted into an oxygen-starved space. Test yourself by asking 'which variable does adding air change?' - if the answer is 'nothing, it is already heat-driven', it is flashover.

Donning SCBA and entering without performing the facepiece seal check and without activating the PASS device before entering the hazard area.

Under time pressure - especially in timed practical evaluations - candidates rush the point where the facepiece goes on and treat the checks as paperwork rather than as a step with a pass/fail consequence.

What to do instead

Fixed donning sequence with the seal check built in and spoken aloud: facepiece on, negative-pressure check (inlet covered, inhale, facepiece collapses and holds), positive-pressure check (exhale valve blocked, gentle exhale holds), then PASS device confirmed on and operating. Say each step out loud during practice so it survives the stress of the evaluation.

Setting a ground ladder by eye instead of applying the quarter working-length rule, and raising it without looking up for overhead conductors and obstructions first.

Ladder placement looks self-evidently simple, so candidates skip the arithmetic and forget that the pre-raise scan is a checkable step in the skill sheet.

What to do instead

Walk the placement off explicitly: base out one-quarter of the working length, climb and check the angle looks near vertical (about 75 degrees) before heel/tie. Immediately before raising, physically look up the full length of the path and state aloud that the area is clear of wires and obstructions.

Advancing a charged hoseline through a doorway and opening the nozzle without first bleeding air from the line, or opening it while the nozzle is pointed into the structure.

The line is already charged and the nozzle pressure feels right, so the candidate assumes the line is fully ready and forgets that trapped air in the hose bed causes an erratic, dangerous reaction at the tip.

What to do instead

Adopt a spoken checkpoint - 'charged, bled, controlled' - at the pump before moving. Bleed the line with the nozzle directed to a safe open area, confirm a solid stream and correct pattern, then enter. During the practical, make the bleed visible and deliberate rather than a quick partial crack.

Using salvage and overhaul as synonyms, or describing overhaul as 'protecting property from water damage' and salvage as 'checking for hidden fire'.

Both tasks happen at the same point in the incident and are performed by the same crews, so the words get attached to the event rather than to the purpose.

What to do instead

Bind each term to its purpose and its timing: salvage happens early and during the fire, protecting property from smoke, water and damage; overhaul happens after knockdown, opening up and searching for hidden fire and extension. If the answer protects belongings, it is salvage; if it finds fire, it is overhaul.

Swinging the pick head of an axe or the wrong end of a halligan bar to pry, or striking metal assemblies with a tool that burrs the surface and then using that damaged tool again.

The flat cutting edge and the pick are visually similar in the heat of the moment, and candidates grab the tool before deciding which function - striking, cutting, prying - the task actually requires.

What to do instead

Name the function before gripping the tool: strike with the head or the fork, pry with the adze or the multi-purpose side, cut with the blade. Practise a short set of specific tasks - forcing an outward-opening door, forcing an inward-opening door, pulling locks - and state the correct end aloud each time until it is automatic.

Remaining silent or waiting to be sure before declaring a MAYDAY, or transmitting the declaration as routine radio traffic without the information a rapid intervention crew needs to find the firefighter.

Firefighters are conditioned to avoid unnecessary transmissions and to assume they can solve the problem themselves, so the decision threshold feels much higher than it actually is; lacking facts, candidates also freeze instead of transmitting what they do know.

What to do instead

Treat the threshold as 'I am in trouble and cannot fix it now' rather than 'I am certain I will die'. Drill a fixed transmission order and deliver it before the situation is fully clear: mayday declared twice with the unit, then location, unit, name, assignment and air remaining, then resources needed. Use your department's exact acronym and exact wording in practice so it needs no thought under stress.

Working at an incident without a stated assumption of command, or failing to announce a command transfer, leaving two people issuing orders or nobody clearly in charge.

Arriving crews want to help immediately, and first-arriving officers are often already engaged in a task, so command is assumed silently rather than declared. Candidates then answer questions about who is responsible as if role and declaration were the same thing.

What to do instead

Make command a spoken act, not an assumption. On arrival, transmit that you are assuming command and give the incident name and the mode you are operating in; on transfer, both parties state it on the radio so no ambiguity remains. In practice, say the sentence every time you take or hand over command, even in a two-person drill.

Beginning overhaul and debris removal in the area of origin before the fire cause and origin area has been examined, documented and protected, destroying the evidence the investigator needs.

Once the fire is out, overhaul is the obvious next task and crews are eager to clear the scene, so the investigative obligation is treated as somebody else's job that happens later.

What to do instead

Insert an explicit hold point between knockdown and overhaul: identify and mark the area of origin, record conditions and observations before disturbing anything, and do not disturb that area until the cause determination process or investigator allows it. In scenarios, state the hold point out loud before you pick up a tool.

Exam requirements can change. Confirm current details with the exam provider.

NFPA Firefighter I practice

199 questions. Each one lists the choices, the correct answer, and an explanation. With JavaScript, this list opens one question at a time. The checker at the top of this page saves progress in this browser when it is available.

  1. Question 1Fire Fighter I

    Which element completes the fire tetrahedron in addition to fuel, oxygen, and heat?

    1. Water vapor
    2. Chemical chain reaction Correct answer.
    3. Carbon monoxide
    4. Nitrogen

    Explanation

    The fire tetrahedron describes the four things needed for combustion: fuel, oxygen, heat, and an uninhibited chemical chain reaction. Removing any one of the four stops the combustion process. Nitrogen, carbon monoxide, and water vapor are products or inert components of the fire environment, not required elements of the tetrahedron.

  2. Question 2Fire Fighter I

    The acronym PASS is used to remember the steps for which action?

    1. Using a portable fire extinguisher Correct answer.
    2. Advancing a charged attack hoseline to the seat of the fire
    3. Donning a self-contained breathing apparatus facepiece
    4. Completing a primary search of the fire floor

    Explanation

    PASS stands for Pull the pin, Aim at the base of the fire, Squeeze the handle, and Sweep the nozzle side to side. It is a memory aid for operating a portable fire extinguisher. No other fireground skill uses this acronym.

  3. Question 3Fire Fighter I

    Which NFPA standard specifies requirements for structural fire fighting protective clothing?

    1. NFPA 1961
    2. NFPA 1971 Correct answer.
    3. NFPA 1977
    4. NFPA 1981

    Explanation

    NFPA 1971 covers the structural fire fighting protective ensemble, including coats, trousers, helmets, gloves, and hoods. NFPA 1981 covers open-circuit SCBA, and NFPA 1961 covers fire hose. Knowing which standard governs each item helps firefighters verify that equipment is compliant.

  4. Question 4Fire Fighter I

    What is the purpose of the bypass valve on an SCBA regulator?

    1. It locks the facepiece securely to the regulator assembly
    2. It supplies air continuously if the regulator fails Correct answer.
    3. It sounds an audible alarm when air pressure is low
    4. It purges accumulated moisture from the air cylinder

    Explanation

    The bypass valve allows air to flow directly from the cylinder to the facepiece, bypassing the regulator's demand mechanism. It is used when the regulator malfunctions or the user cannot draw air normally. The low-air alarm and the facepiece attachment perform different functions.

  5. Question 5Fire Fighter I

    Which knot is used to join two ropes together, particularly when the ropes are of different diameters?

    1. Becket bend Correct answer.
    2. Clove hitch
    3. Bowline
    4. Figure eight on a bight

    Explanation

    The becket bend, also called a sheet bend, joins two ropes and works well when the ropes differ in size or material. A bowline and a figure eight on a bight both create loops rather than joining two ropes. A clove hitch ties a rope to an object.

  6. Question 6Fire Fighter I

    Ground ladders should be set at an angle of approximately:

    1. 90 degrees
    2. 60 degrees
    3. 75 degrees Correct answer.
    4. 45 degrees

    Explanation

    The correct climbing angle for a ground ladder is about 75 degrees from horizontal, roughly one quarter of the ladder's working length out from the wall. This angle balances stability with ease of climbing. Angles that are too steep or too shallow increase the risk of the ladder slipping or tipping.

  7. Question 7Fire Fighter I

    Which type of fire stream has the greatest reach and penetration?

    1. Fog stream
    2. Straight fog stream
    3. Solid stream Correct answer.
    4. Broken stream

    Explanation

    A solid stream is discharged as a compact column of water, which gives it the longest reach and the most penetrating power. Fog and broken streams break the water into droplets, which absorb heat well but lose reach. Stream selection depends on the fire conditions and ventilation.

  8. Question 8Fire Fighter I

    A firefighter who becomes lost or trapped inside a structure should immediately:

    1. Transmit a MAYDAY on the radio Correct answer.
    2. Wait for the incident commander to call roll
    3. Continue searching until the low-air alarm sounds
    4. Exit through the nearest window without notifying anyone

    Explanation

    A MAYDAY declares to command and all companies that a firefighter is in distress and triggers the rapid intervention response. It should be transmitted as soon as the firefighter recognizes the emergency, not after air runs low. Delaying the call reduces the chance of a successful rescue.

  9. Question 9Fire Fighter I

    Which term describes the transition in which all combustible contents of a compartment ignite nearly simultaneously?

    1. Decay
    2. Rollover
    3. Backdraft
    4. Flashover Correct answer.

    Explanation

    Flashover is the change from a growth-stage fire to a fully developed fire, when heat feedback ignites all exposed fuel in the compartment at once. It is marked by very high heat release and temperatures that make the space untenable. Rollover and backdraft are different phenomena with different causes.

  10. Question 10Fire Fighter I

    A building with exterior walls of noncombustible masonry and interior structural members of wood is classified as which type of construction?

    1. Type III Correct answer.
    2. Type I
    3. Type IV
    4. Type V

    Explanation

    Type III, or ordinary construction, has noncombustible exterior walls with interior structural members that are wholly or partly combustible. This combination is a common fireground concern because the wood interior can burn while the masonry shell contains the heat. Type V is wood frame throughout, and Types I and IV have noncombustible interior structure.

  11. Question 11Fire Fighter I

    During a hydrant flow test, the pressure reading taken while water is discharging from the hydrant is called the:

    1. Atmospheric pressure
    2. Static pressure
    3. Residual pressure Correct answer.
    4. Elevation pressure

    Explanation

    Residual pressure is the pressure remaining in the water system while water is flowing. It is compared with the static pressure to judge how much more water the system can supply. Static pressure is read before any water flows.

  12. Question 12Fire Fighter I

    Which forcible entry method uses a key tool or lock cylinder removal to open a door while causing the least damage?

    1. Ramming
    2. Breaching
    3. Through-the-lock Correct answer.
    4. Conventional forcible entry

    Explanation

    Through-the-lock entry defeats the lock itself, typically by removing the cylinder or actuating the lock mechanism, so the door and frame are left largely intact. It is preferred when the door must be secured afterward. Conventional entry and ramming damage the door, frame, or wall.

  13. Question 13Fire Fighter I

    The primary search is intended to:

    1. Document property damage before overhaul begins
    2. Confirm that the fire has been fully extinguished
    3. Account for all firefighting personnel on the scene
    4. Quickly locate victims in likely occupied areas Correct answer.

    Explanation

    A primary search is a rapid, systematic sweep of the areas where victims are most likely to be, done early in the incident while conditions permit. It is fast and covers the most probable locations first. A secondary search is more thorough and occurs after the fire is controlled.

  14. Question 14Fire Fighter I

    Aqueous film-forming foam is most effective on which type of fire?

    1. Class D combustible metal fires
    2. Class C energized electrical fires
    3. Class B hydrocarbon fuel fires Correct answer.
    4. Class A wood and paper fires

    Explanation

    AFFF is designed for Class B flammable and combustible liquid fires, where it forms a film that seals the fuel surface from oxygen. It is not intended for ordinary combustibles, energized electrical equipment, or combustible metals. Using the wrong agent can allow the fire to reignite or can create a hazard.

  15. Question 15Fire Fighter I

    A fire involving vegetable oil in a commercial deep fryer is classified as:

    1. Class D
    2. Class K Correct answer.
    3. Class A
    4. Class B

    Explanation

    Class K covers fires in cooking appliances that involve combustible cooking media such as vegetable or animal oils and fats. These fires react violently to water because the water turns to steam and expels burning oil. A wet chemical agent is used to saponify the fuel.

  16. Question 16Fire Fighter I

    Composite SCBA cylinders must undergo hydrostatic testing every:

    1. 2 years
    2. 1 year
    3. 3 years
    4. 5 years Correct answer.

    Explanation

    Fully wrapped composite cylinders must be requalified hydrostatically at intervals set by the U.S. Department of Transportation, which is every five years for these cylinders. Cylinders also have a limited service life. A unit or department that skips requalification is using an unserviceable cylinder.

  17. Question 17Fire Fighter I

    In an incident command system, the optimal span of control is:

    1. Five subordinates Correct answer.
    2. One subordinate
    3. Ten subordinates
    4. Two subordinates

    Explanation

    The span of control is the number of subordinates one supervisor can effectively direct; the recommended range is roughly three to seven, with five considered optimal. Exceeding that range overloads the supervisor and reduces safety. Smaller spans are acceptable for complex or hazardous functions.

  18. Question 18Fire Fighter I

    The primary purpose of overhaul is to:

    1. Restore the building to a safe, habitable condition
    2. Find and extinguish hidden fire to prevent rekindle Correct answer.
    3. Ventilate the structure of remaining smoke
    4. Determine the cause of the fire for the report

    Explanation

    Overhaul is the systematic search for and extinguishment of hidden or smoldering fire after the main body of fire is knocked down. Its goal is to prevent rekindle before the company leaves the scene. Origin and cause work and smoke removal may occur during this phase but are not its primary purpose.

  19. Question 19Fire Fighter I

    In a building protected by automatic sprinklers, a fire typically causes:

    1. No sprinklers to operate until manually activated
    2. All sprinklers in the building to operate simultaneously
    3. All sprinklers on the fire floor to operate
    4. Only the sprinklers near the fire to operate Correct answer.

    Explanation

    Each sprinkler head has its own heat-sensitive element and operates independently when the rated temperature is reached. As a result, only the heads over the fire flow water, which limits damage. This is also why a closed sprinkler head on the fire floor does not protect the rest of the floor.

  20. Question 20Fire Fighter I

    Which action should take place before ventilation is performed during a fire attack?

    1. Completing overhaul of the room of origin
    2. Opening every window on the fire floor at the same time
    3. Locating the fire and coordinating with the attack team Correct answer.
    4. Shutting down the sprinkler system to improve visibility

    Explanation

    Ventilation must be coordinated with fire attack and based on a known fire location, or it can draw fire toward uninvolved areas and endanger crews. Ventilating before the attack line is ready can intensify the fire. The release of heat and smoke should be timed to support the advance of the hoseline.

  21. Question 21Fire Fighter I

    Which condition at a closed compartment most strongly suggests that a backdraft may occur when it is opened?

    1. Dense smoke under pressure and no visible flame Correct answer.
    2. A well-ventilated compartment with a steady burn
    3. Light-colored smoke drifting slowly from the eaves
    4. Flames visible inside at ceiling level

    Explanation

    A backdraft occurs when a fuel-rich, oxygen-starved fire receives a sudden inrush of air. Warning signs include heavy, pressurized smoke (often puffing or pulsing from openings), windows stained or discolored, and no visible flame. Ventilation must be controlled and coordinated in these conditions.

  22. Question 22Fire Fighter I

    Which type of foam is designed to extinguish fires involving polar solvents such as alcohols?

    1. Alcohol-resistant foam Correct answer.
    2. Compressed air foam
    3. High-expansion foam
    4. Fluoroprotein foam

    Explanation

    Polar solvents break down ordinary foam blankets, so alcohol-resistant foam is formulated to form a protective polymeric membrane over the fuel. Standard foams fail on these fuels. Matching the foam type to the fuel is essential for extinguishment.

  23. Question 23Fire Fighter I

    During an interior attack, the rapid intervention team should be:

    1. Assigned to the attack line as a backup crew
    2. Positioned at the command post to track personnel
    3. Working overhaul in the fire room to reduce fatigue
    4. Staged near the entry point with tools ready Correct answer.

    Explanation

    The rapid intervention team is a dedicated rescue crew for firefighters; it must be fully equipped and staged close enough to the entry point to deploy immediately. It is not given other fireground tasks. Using the crew for fire attack or overhaul eliminates the rescue capability when it is needed.

  24. Question 24Fire Fighter I

    The practical maximum vertical lift for a fire pump drafting from a static source is about:

    1. 10 to 15 feet
    2. 35 to 40 feet
    3. 20 to 25 feet Correct answer.
    4. 5 to 10 feet

    Explanation

    Although atmospheric pressure could theoretically support a column of water about 33.9 feet high, friction loss, imperfect vacuum, and water turbulence reduce the practical lift to roughly 20 to 25 feet. Attempting a greater lift causes cavitation and loss of capacity. Keeping the lift short protects pump performance.

  25. Question 25Fire Fighter I

    When ventilating a window from a ground ladder, a firefighter should:

    1. Work from the windward side, staying below the sill Correct answer.
    2. Stand directly in front of the window at sill height
    3. Break the lowest pane first to let smoke out
    4. Break the window from the leeward side with a pike pole

    Explanation

    Working from the windward side keeps smoke and heat moving away from the firefighter, and staying below the sill puts the ladder and the firefighter out of the path of the venting fire gases. Glass should be taken from the top of the window so it falls away from the ladder. Positioning in front of or beneath the opening exposes the firefighter to the discharge.

  26. Question 26Fire Fighter I

    The chin strap on a firefighter's helmet is intended primarily to:

    1. Secure the SCBA facepiece to the head
    2. Cushion the jaw against impact
    3. Hold the helmet in place Correct answer.
    4. Protect the neck from radiant heat

    Explanation

    The chin strap secures the helmet to the head so it does not shift or fall off during crawling, climbing, or sudden movements. It is not designed to protect the neck, hold the SCBA facepiece, or cushion the jaw.

  27. Question 27Fire Fighter I

    The bypass valve on an SCBA regulator is used to:

    1. Extend the low-air alarm time
    2. Supply air if regulator fails Correct answer.
    3. Purge water from the facepiece
    4. Increase the cylinder pressure

    Explanation

    The bypass valve supplies air directly from the cylinder to the facepiece if the regulator fails or becomes blocked. It is an emergency feature, not a way to increase pressure or purge water.

  28. Question 28Fire Fighter I

    A fire involving energized electrical equipment is classified as:

    1. Class A
    2. Class C Correct answer.
    3. Class D
    4. Class B

    Explanation

    Class C applies to fires involving energized electrical equipment, where the primary hazard is the electrical energy. Once power is removed, the fuel may be reclassified based on the burning material.

  29. Question 29Fire Fighter I

    The PASS acronym for portable extinguisher use stands for:

    1. Pull, Aim, Stand, Sweep
    2. Point, Aim, Squeeze, Stop
    3. Pull, Aim, Squeeze, Sweep Correct answer.
    4. Pull, Alert, Spray, Secure

    Explanation

    PASS stands for Pull the pin, Aim at the base of the fire, Squeeze the handle, and Sweep the nozzle. This sequence keeps the extinguisher operating and directs agent to the burning fuel.

  30. Question 30Fire Fighter I

    The main advantage of a preconnected attack line is that it:

    1. Requires less water pressure
    2. Can be deployed quickly Correct answer.
    3. Lasts longer in service
    4. Produces a wider stream

    Explanation

    A preconnected attack line is already attached to the pump and laid in a bed for immediate deployment, saving time at the fireground. It does not inherently change stream width, pressure requirements, or hose service life.

  31. Question 31Fire Fighter I

    A dry-barrel hydrant is designed so that the barrel is normally:

    1. Empty and drained Correct answer.
    2. Sealed by a clapper
    3. Filled with water
    4. Pressurized with foam

    Explanation

    A dry-barrel hydrant has a main valve below the frost line, so the barrel remains empty and drains after use. This prevents freezing in cold weather.

  32. Question 32Fire Fighter I

    The primary purpose of vertical ventilation is to:

    1. Improve visibility outside
    2. Cool the exterior walls
    3. Release hot smoke and gases upward Correct answer.
    4. Increase water pressure at the nozzle

    Explanation

    Vertical ventilation opens the roof or upper level to let hot smoke and gases escape upward. This improves interior visibility and reduces heat accumulation.

  33. Question 33Fire Fighter I

    Salvage covers are primarily used to:

    1. Protect property from water Correct answer.
    2. Mark the fire perimeter
    3. Absorb flammable liquids
    4. Support collapsed walls

    Explanation

    Salvage covers are placed over furniture, equipment, and stock to divert water and prevent water damage. They are not structural supports, absorbents, or perimeter markers.

  34. Question 34Fire Fighter I

    A rollover differs from a flashover in that a rollover involves:

    1. Collapse of the ceiling assembly
    2. Ignition of all room contents
    3. Flaming in the smoke layer Correct answer.
    4. A sudden increase in oxygen

    Explanation

    A rollover is the ignition of flammable gases in the smoke layer, producing flames that travel through the upper layer. A flashover involves simultaneous ignition of all combustible contents in the compartment.

  35. Question 35Fire Fighter I

    A bowstring truss roof is especially dangerous to interior firefighters because it:

    1. Resists collapse for hours
    2. Is limited to one-story buildings
    3. May fail with little warning Correct answer.
    4. Requires no roof ventilation

    Explanation

    Bowstring trusses concentrate large loads and can fail suddenly when fire attacks the chords or connections. Their large open spaces also hide fire and make roof operations hazardous.

  36. Question 36Fire Fighter I

    When an SCBA low-air alarm activates during interior operations, the firefighter should:

    1. Increase the breathing rate
    2. Notify command and exit immediately Correct answer.
    3. Remove the regulator to save air
    4. Reset the alarm and continue

    Explanation

    When the low-air alarm sounds, the firefighter must immediately notify the team or command and exit the hazard area. Continuing interior work risks running out of air.

  37. Question 37Fire Fighter I

    A hose clamp is used during a hose operation to:

    1. Increase nozzle pressure
    2. Couple mismatched threads
    3. Mark the hose for salvage
    4. Stop flow temporarily for repairs Correct answer.

    Explanation

    A hose clamp pinches the hose to stop water flow temporarily so a damaged section or appliance can be replaced. It does not increase pressure, adapt threads, or mark hose.

  38. Question 38Fire Fighter I

    Which nozzle setting is most effective for hydraulic ventilation?

    1. Wide fog pattern Correct answer.
    2. Straight stream
    3. Solid stream
    4. Narrow fog pattern

    Explanation

    A wide fog pattern placed near an opening moves a large volume of air and pulls smoke out through the opening. A straight or solid stream provides reach but little air movement.

  39. Question 39Fire Fighter I

    A centrifugal fire pump must be primed before drafting because it:

    1. Requires pressure to open the valve
    2. Cannot lift water without a prime Correct answer.
    3. Prevents water hammer
    4. Cools the pump bearings

    Explanation

    A centrifugal pump cannot create enough vacuum to lift water from a static source until it is primed and filled with water. Priming removes air from the pump and suction hose.

  40. Question 40Fire Fighter I

    A Halligan bar is most commonly paired with which tool for forcible entry?

    1. Flathead axe Correct answer.
    2. Pike pole
    3. Sledge hammer
    4. Bolt cutter

    Explanation

    The Halligan bar is commonly paired with a flathead axe; the axe can strike the bar and the two tools can be used together for forcing. This combination is often called the irons.

  41. Question 41Fire Fighter I

    In a right-hand search pattern, the firefighter begins by:

    1. Following the left wall
    2. Crawling straight ahead from the door
    3. Turning right and following the wall Correct answer.
    4. Searching the room center first

    Explanation

    In a right-hand search, the firefighter turns right at the entry and follows the wall to maintain orientation. The wall stay keeps the searcher from becoming disoriented in smoke.

  42. Question 42Fire Fighter I

    Unity of command on the fireground means that each firefighter:

    1. Carries one radio
    2. Reports to one supervisor Correct answer.
    3. Works in one division
    4. Has one assigned task

    Explanation

    Unity of command means each firefighter has only one supervisor, preventing conflicting orders. It does not limit radio use, division assignment, or task count.

  43. Question 43Fire Fighter I

    The fireground acronym PAR refers to:

    1. Personnel accountability report Correct answer.
    2. Pump and relay
    3. Post-arrival rescue
    4. Primary attack report

    Explanation

    PAR stands for personnel accountability report, a check that confirms the status of assigned personnel. It is used to account for firefighters during an incident.

  44. Question 44Fire Fighter I

    During overhaul, a thermal imaging camera is used mainly to:

    1. Find fire in voids Correct answer.
    2. Measure water flow
    3. Record radio traffic
    4. Detect gas leaks

    Explanation

    A thermal imaging camera shows temperature differences, helping firefighters find hidden fire in walls, ceilings, and voids during overhaul. It does not measure water flow, record radio traffic, or detect gas leaks.

  45. Question 45Fire Fighter I

    Water hammer in a fire hose is caused by:

    1. Sudden valve or nozzle closure Correct answer.
    2. Excessive hose length
    3. Air trapped in the hose
    4. A clogged nozzle tip

    Explanation

    Water hammer is a pressure surge caused by a sudden stop in water flow, such as closing a nozzle or valve quickly. It can damage hose and piping, so valves should be operated slowly.

  46. Question 46Fire Fighter I

    Finished foam is produced when foam concentrate is mixed with:

    1. Water and air Correct answer.
    2. Water and powder
    3. Air and carbon dioxide
    4. Powder and air

    Explanation

    Finished foam is made by mixing foam concentrate with water and then aerating the solution with air. The resulting blanket separates the fuel from oxygen and helps cool it.

  47. Question 47Fire Fighter I

    Carbon dioxide extinguishers are preferred for energized electrical fires because they:

    1. Blanket the fuel with a foam layer
    2. Cool the fire rapidly with water
    3. Are nonconductive and leave no residue Correct answer.
    4. Absorb oxygen chemically

    Explanation

    Carbon dioxide is nonconductive and leaves no residue, making it suitable for energized electrical equipment. It displaces oxygen and cools somewhat but is not a water or foam agent.

  48. Question 48Fire Fighter I

    The two-in/two-out rule requires that:

    1. Two outside for each two inside Correct answer.
    2. Two enter while two pump
    3. Two officers command and report
    4. Two hose lines at each entry

    Explanation

    The two-in/two-out rule requires at least two firefighters outside to support each two firefighters inside an immediately dangerous area. The outside team can rescue or assist the interior team.

  49. Question 49Fire Fighter I

    The butt of a ground ladder is the end that:

    1. Carries the halyard
    2. Rests on the ground Correct answer.
    3. Extends above the roof
    4. Holds the tip

    Explanation

    The butt is the lower end of a ground ladder that rests on the ground. The tip is the upper end that contacts the building.

  50. Question 50Fire Fighter I

    A transitional fire attack involves:

    1. Ventilating the roof before entry
    2. Advancing a line through the front door
    3. Using foam instead of water
    4. Applying water from outside before entry Correct answer.

    Explanation

    A transitional attack applies water from outside into the fire compartment to cool the fire before firefighters enter. It can reduce flashover potential and improve conditions for an interior attack.

  51. Question 51Fire Fighter I

    The fire tetrahedron consists of which four components?

    1. Heat, water, oxygen, and chemical chain reaction
    2. Heat, fuel, smoke, and chemical chain reaction
    3. Heat, fuel, oxygen, and atmospheric pressure
    4. Heat, fuel, oxygen, and chemical chain reaction Correct answer.

    Explanation

    Combustion requires fuel, oxygen, heat, and an uninhibited chemical chain reaction; removing any one leg stops the fire. Extinguishment methods work by attacking one or more of these components.

  52. Question 52Fire Fighter I

    SCBA cylinders must be hydrostatically tested at which interval?

    1. Every 1 year
    2. Every 15 years
    3. Every 5 years Correct answer.
    4. Every 10 years

    Explanation

    Compressed-air cylinders used in SCBA require hydrostatic testing every five years to verify the cylinder can still safely contain rated pressure. Visual inspections are performed more frequently between tests.

  53. Question 53Fire Fighter I

    What is the function of a PASS device worn by a firefighter?

    1. Filters toxic gases from the facepiece
    2. Measures the air remaining in the cylinder
    3. Sends the wearer's location to the incident commander
    4. Alerts others if the wearer becomes motionless Correct answer.

    Explanation

    A personal alert safety system sounds a loud alarm if the wearer stops moving for a set period or activates it manually, helping rescuers locate a downed firefighter. It is separate from the SCBA's air monitoring.

  54. Question 54Fire Fighter I

    What is the correct sequence for using a portable fire extinguisher?

    1. Pull, aim at the smoke, squeeze, and sweep
    2. Pull, aim at the top, squeeze, and sweep
    3. Pull, aim at the base, hold, and spray
    4. Pull, aim at the base, squeeze, and sweep Correct answer.

    Explanation

    The accepted sequence is to pull the pin, aim at the base of the fire, squeeze the lever, and sweep the nozzle side to side. Applying agent to the base of the flames cuts off the fuel and interrupts combustion.

  55. Question 55Fire Fighter I

    A Class B fire involves which type of material?

    1. Combustible metals such as magnesium
    2. Flammable and combustible liquids Correct answer.
    3. Ordinary combustibles such as wood and paper
    4. Energized electrical equipment

    Explanation

    Class B fires burn flammable and combustible liquids and gases. Ordinary combustibles are Class A, energized electrical equipment is Class C, and combustible metals are Class D.

  56. Question 56Fire Fighter I

    What does a bowline knot accomplish?

    1. Attaches a rope to an object and tightens under load
    2. Shortens a rope without cutting it
    3. Ties a fixed loop at the end of a rope Correct answer.
    4. Joins two ropes of different diameters

    Explanation

    The bowline forms a fixed loop that will not tighten or slip under load, making it useful for hoisting and rescue work. It is commonly backed up with a safety knot to prevent accidental capsizing.

  57. Question 57Fire Fighter I

    A roof ladder is carried to the roof primarily to do what?

    1. Provide a stable foothold on a pitched roof Correct answer.
    2. Reach a window above a ground ladder
    3. Serve as a stretcher for a downed victim
    4. Bridge a narrow trench or opening

    Explanation

    A roof ladder has hooks that lay over the ridge so the ladder lies flat on the pitched surface, giving firefighters a secure platform for ventilation work. Without the hooks the ladder would slide or hang free of the roof.

  58. Question 58Fire Fighter I

    A firefighter who becomes lost or trapped inside a burning building should do what?

    1. Radio a Mayday and turn on the PASS device Correct answer.
    2. Enter a closet and close the door
    3. Wait in place without using the radio
    4. Continue searching quietly until an exit is found

    Explanation

    A lost or trapped firefighter must immediately transmit a Mayday with name, location, and problem while activating the PASS device so rescuers can find them. Continuing alone without notifying anyone wastes critical rescue time.

  59. Question 59Fire Fighter I

    A ground ladder should be placed so that its base sits at roughly what angle and distance from the wall?

    1. 75 degrees, with the base one-quarter of the working length out Correct answer.
    2. About 45 degrees, with the base one-fifth of the working length out
    3. About 80 degrees, with the base one-third of the working length out
    4. About 60 degrees, with the base one-half of the working length out

    Explanation

    The standard rule places the ladder at about 75 degrees from horizontal, with the base one-quarter of the working length away from the building. This gives a stable climbing angle and enough room to raise the ladder.

  60. Question 60Fire Fighter I

    In a forward lay, how is hose deployed?

    1. The pumper stops at the hydrant and lays toward the fire Correct answer.
    2. The pumper stops at the fire and lays hose back to the hydrant
    3. Hose is laid dry and charged later at the fireground
    4. Two pumpers lay hose toward each other from both ends

    Explanation

    A forward lay runs from the water source to the fireground, so the pumper stops at the hydrant or other supply point and the driver lays hose as the apparatus proceeds. The pumper then either supplies the fire directly or feeds another engine at the scene.

  61. Question 61Fire Fighter I

    Where should a positive pressure ventilation fan be placed?

    1. On the roof, aimed down through the scuttle
    2. Inside the doorway, blowing toward the fire room
    3. At the window, blowing inward from the exterior
    4. Outside a doorway, with the air cone covering the opening Correct answer.

    Explanation

    A PPV fan works by pressurizing the structure from outside, so it is positioned at a doorway with its cone covering the opening while a matching exhaust opening is created downwind. Placement inside the opening disrupts the pressure differential the fan depends on.

  62. Question 62Fire Fighter I

    What primarily determines the flow rate from a smooth-bore nozzle?

    1. The tip size and the nozzle pressure Correct answer.
    2. The pump discharge pressure alone
    3. The length of the attack line
    4. The diameter of the hose and the fog pattern

    Explanation

    For a smooth-bore nozzle, flow depends on the nozzle tip diameter and the pressure at the nozzle, following a fixed hydraulic formula. Hose diameter and pump pressure matter only as they affect the pressure actually delivered to the tip.

  63. Question 63Fire Fighter I

    What should a firefighter do before forcing a door?

    1. Try the door to see if it is already unlocked Correct answer.
    2. Force the door immediately to save time
    3. Ventilate the window beside the door first
    4. Sound the floor ahead with an axe

    Explanation

    The principle of try before you pry means checking whether the door is already open or unlocked before damaging it. Unnecessary forcible entry wastes time and destroys a door that could have controlled the spread of fire and smoke.

  64. Question 64Fire Fighter I

    Why should a firefighter close the door behind the attack team as they advance?

    1. To improve visibility for the search team
    2. To reduce water damage to the room
    3. To keep smoke from entering the stairwell above
    4. To limit fire spread and heat into the area behind them Correct answer.

    Explanation

    Closing doors behind an advancing hoseline confines fire, heat, and smoke to the compartment of origin and protects the stairs and exit path. Control of the door is a basic part of fire confinement during interior operations.

  65. Question 65Fire Fighter I

    What is the main job of a rapid intervention team on the fireground?

    1. Operate the pump at the attack pumper
    2. Stand by to rescue firefighters who become trapped Correct answer.
    3. Provide medical care at the rehab sector
    4. Advance the initial attack line into the structure

    Explanation

    A rapid intervention team is staged fully equipped and ready to enter immediately if a firefighter becomes trapped or lost. Members perform no other task so they are never committed elsewhere when a rescue is needed.

  66. Question 66Fire Fighter I

    What is the purpose of the moisture barrier in structural firefighting turnout gear?

    1. Provide the primary thermal insulation layer
    2. Reflect radiant heat back toward the fire
    3. Keep water and steam away from the wearer Correct answer.
    4. Support the weight of the SCBA harness

    Explanation

    The moisture barrier prevents water and steam from penetrating to the skin and clothing underneath, which would otherwise cause scalds and destroy thermal protection. It works with the outer shell and thermal liner as a layered system.

  67. Question 67Fire Fighter I

    What symptom indicates that a centrifugal pump is cavitating?

    1. A rattling sound and fluctuating discharge pressure Correct answer.
    2. A rise in engine temperature only
    3. Clear water with no visible air
    4. A steady increase in discharge pressure

    Explanation

    Cavitation occurs when the pump cannot get enough water and vapor pockets collapse against the impeller, producing a rattling or gravel-like sound and unstable pressure. The correct response is to reduce discharge and improve the water supply.

  68. Question 68Fire Fighter I

    How should firefighters treat a vehicle touching a downed electrical line?

    1. Approach and move the line with a dry wooden tool
    2. Assume the line is dead if no sparks are visible
    3. Treat the area as energized until the utility de-energizes it Correct answer.
    4. Spray the line with a fog stream to ground it

    Explanation

    Downed lines are treated as energized until the utility confirms they are de-energized, and a safe distance is maintained around the vehicle and the wire. Electricity may still be present with no visible arcing or sparks.

  69. Question 69Fire Fighter I

    What is the standard evacuation signal used to clear firefighters from a structure?

    1. Two short blasts repeated three times
    2. One long blast followed by three short blasts
    3. Three long air horn blasts repeated Correct answer.
    4. A continuous siren for 30 seconds

    Explanation

    The emergency evacuation signal is three long blasts on an apparatus air horn or siren, repeated, and all personnel exit the structure. Radio traffic also announces the evacuation so everyone hears the order.

  70. Question 70Fire Fighter I

    A firefighter who is confused with hot, dry skin after firefighting should be treated how?

    1. Kept in rehab and monitored for 30 minutes
    2. Given a rest period and then reassigned
    3. Removed from the scene, cooled, and evaluated for heat stroke Correct answer.
    4. Returned to firefighting after drinking water

    Explanation

    Altered mental status with hot, dry skin suggests heat stroke, a medical emergency that requires immediate cooling and transport. Reassignment or observation alone allows a life-threatening condition to progress.

  71. Question 71Fire Fighter I

    In a compartment fire, what does the neutral plane describe?

    1. The layer of smoke found at floor level
    2. The level at which the fire is extinguished
    3. The boundary between the hot upper layer and cooler lower air Correct answer.
    4. The point where flames first reach the ceiling

    Explanation

    The neutral plane is the interface where the hot, pressurized upper gas layer meets the cooler, denser air below it. Its height indicates how far the fire has developed and where firefighters can work with better visibility and lower heat.

  72. Question 72Fire Fighter I

    What is the purpose of a four-way hydrant valve?

    1. Letting a second pumper connect to a hydrant that is already flowing Correct answer.
    2. Reducing excessive pressure delivered from the hydrant
    3. Splitting one intake into two separate discharge lines
    4. Preventing water from flowing backward into the main

    Explanation

    A four-way valve allows a second engine to connect to a hydrant already in use by the first, so supply can be upgraded without shutting down the attack line. The clapper inside redirects flow when the second pumper charges in.

  73. Question 73Fire Fighter I

    Why does a lightweight steel bar joist roof fail sooner than a solid wood joist roof under fire conditions?

    1. The roof deck is usually heavier than a comparable wood deck
    2. Steel members lose strength quickly as they are heated Correct answer.
    3. Steel expands and pushes the exterior walls outward
    4. Steel joists burn and add fuel to the fire

    Explanation

    Unprotected steel loses a large share of its strength at temperatures reached early in a fire, and bar joists are slender with little mass to absorb heat. Collapse can therefore occur within minutes of flame impingement on the roof assembly.

  74. Question 74Fire Fighter I

    What is a key limitation of using a fog stream for interior fire attack?

    1. It produces a stream with insufficient reach
    2. It must be operated only from outside the building
    3. It can entrain air and push heat and fire ahead of it Correct answer.
    4. It cannot be used to protect the firefighter

    Explanation

    A wide fog pattern draws air into the stream and can drive heat, smoke, and fire toward other areas of the structure. Firefighters therefore use straight or narrow streams for interior attack unless conditions call for a specific fog application.

  75. Question 75Fire Fighter I

    Which condition most increases the likelihood of a backdraft?

    1. A heated, smoke-filled compartment with little ventilation Correct answer.
    2. A fire that has cooled below its ignition temperature
    3. A compartment with open windows and free-burning fire
    4. A fire confined to the attic of a wood-frame house

    Explanation

    A backdraft occurs when a ventilation-limited fire in a closed compartment is suddenly supplied with air, igniting accumulated fuel gases. Dense, pressurized smoke and windows stained or pulsing are warning signs of this condition.

  76. Question 76Fire Fighter I

    Which function does a personal alert safety system (PASS) device perform for a firefighter?

    1. It sounds an alarm if the wearer stops moving for a set period Correct answer.
    2. It reports the wearer's location to the incident commander
    3. It warns the wearer when the air cylinder is nearly empty
    4. It removes toxic gases from the air the wearer breathes

    Explanation

    A PASS device is motion-activated; if the wearer remains still for roughly 20 to 30 seconds it emits a pre-alert, then a loud alarm to help rescuers locate the firefighter. It does not sense air pressure or purify air.

  77. Question 77Fire Fighter I

    A fire involving an energized electrical motor is classified as which class of fire?

    1. Class C Correct answer.
    2. Class B
    3. Class D
    4. Class A

    Explanation

    Class C covers fires in energized electrical equipment, where the shock hazard governs extinguisher selection. Once the power is shut off, the burning material is classified by what is actually burning.

  78. Question 78Fire Fighter I

    On a section of fire hose, which coupling has the exposed threads?

    1. Both couplings on a hose section
    2. The female coupling
    3. The male coupling Correct answer.
    4. Neither; hose threads are molded into the rubber jacket

    Explanation

    The male coupling carries external threads that screw into the swivel of the female coupling on the next section. Each hose section has one male and one female end so sections can be joined in either direction.

  79. Question 79Fire Fighter I

    Which knot forms a fixed loop in the middle of a rope without using the rope ends?

    1. Clove hitch
    2. Sheet bend
    3. Half hitch
    4. Figure-eight on a bight Correct answer.

    Explanation

    A figure-eight on a bight is tied by doubling a section of rope and tying a figure-eight, producing a secure loop that will not slip or jam. It can be placed anywhere along the rope because the ends are not needed.

  80. Question 80Fire Fighter I

    Which fuel is a Class K extinguisher designed to extinguish?

    1. Cooking oils and fats in commercial fryers Correct answer.
    2. Combustible metals such as magnesium
    3. Gasoline and other flammable liquids
    4. Energized electrical equipment

    Explanation

    Class K extinguishers use a wet chemical agent that saponifies hot cooking oils, forming a soap-like blanket that smothers the fire and prevents reignition. Water-based agents can cause violent eruption of hot grease.

  81. Question 81Fire Fighter I

    For which task is a pick-head axe preferred over a flat-head axe?

    1. Striking another tool to force a door
    2. Driving a wooden wedge into a door frame
    3. Cutting through a hardened steel padlock
    4. Penetrating and pulling roof or wall materials Correct answer.

    Explanation

    The pick end concentrates force for breaking through roof decks, walls, and ceilings, and the curved pick gives leverage for pulling material away. The flat head is designed as a striking surface rather than a penetrating tool.

  82. Question 82Fire Fighter I

    Which appliance is used to stop the flow in a charged hose line so a damaged section can be replaced?

    1. Hose clamp Correct answer.
    2. Siamese
    3. Water thief
    4. Reducer

    Explanation

    A hose clamp squeezes the hose flat to stop flow, allowing a damaged length to be removed and replaced without shutting down the pump. The other appliances change how lines are combined, divided, or connected by size.

  83. Question 83Fire Fighter I

    When the low-air alarm on an SCBA activates, what should the firefighter do?

    1. Stay in place and wait for the rapid intervention team
    2. Notify the crew and exit by the nearest safe route Correct answer.
    3. Open the bypass valve and continue working
    4. Continue searching until the assigned area is clear

    Explanation

    The low-air alarm signals that only the reserve needed to escape remains, so the firefighter must alert the crew and incident commander and leave immediately. Delaying the exit consumes the reserve that was set aside for escape.

  84. Question 84Fire Fighter I

    On a peaked roof, where should the primary ventilation opening be cut?

    1. On the downwind side, far from the fire
    2. At the lowest edge of the roof, near the gutters
    3. Directly over the stairwell to protect the stairs
    4. As close as possible to directly over the fire, near the peak Correct answer.

    Explanation

    Hot smoke and fire gases collect at the highest point of the compartment, so an opening placed over the fire near the peak lets them escape with the least horizontal travel. Cutting away from the fire allows the products of combustion to spread through the attic or cockloft.

  85. Question 85Fire Fighter I

    Which change will increase nozzle reaction on a handline?

    1. Moving the nozzle to a lower elevation
    2. Increasing the flow rate through the nozzle Correct answer.
    3. Reducing the nozzle pressure
    4. Adding another length of the same hose without adjusting the pump

    Explanation

    Nozzle reaction is the backward force created by water leaving the nozzle at velocity; greater flow or pressure means greater reaction. Crews must plan for added reaction whenever a larger tip or higher flow is selected.

  86. Question 86Fire Fighter I

    What is supplied through a building's fire department connection?

    1. Foam concentrate for a fixed extinguishing system
    2. Compressed air to charge a dry standpipe
    3. Water from a pumper into the standpipe or sprinkler system Correct answer.
    4. Domestic water for the building's plumbing fixtures

    Explanation

    The fire department connection lets a pumper supplement the building's standpipe or sprinkler system, adding pressure and volume the building supply may not provide. It is a one-way connection into the system, not a domestic water line.

  87. Question 87Fire Fighter I

    How does a typical automatic sprinkler head activate?

    1. A firefighter manually pulls a handle on each head
    2. The entire system opens when the fire alarm sounds
    3. A heat-sensitive element in the head fails at its rated temperature Correct answer.
    4. A smoke detector signals the control valve to open

    Explanation

    Each sprinkler head operates independently when the fusible link or glass bulb reaches its design temperature, so only heads near the fire flow. This local action limits water damage and preserves the rest of the system.

  88. Question 88Fire Fighter I

    In balloon-frame construction, why can fire spread rapidly from the basement to the attic?

    1. Continuous vertical wall voids run from the foundation to the roof Correct answer.
    2. The building has no interior partitions to slow the fire
    3. The exterior walls are built of unprotected steel studs
    4. The roof deck is made of lightweight insulating concrete

    Explanation

    Balloon framing uses studs that run the full height of the building, creating unobstructed channels inside the walls that act like chimneys. Firefighters must check the attic and basement early because fire can appear far from where it started.

  89. Question 89Fire Fighter I

    During a primary search, which areas should be searched first?

    1. Areas most threatened by fire and most likely to contain victims Correct answer.
    2. The attic and basement before the fire floor
    3. Only rooms the occupants identify on arrival
    4. The rooms farthest from the fire, working back toward the door

    Explanation

    A primary search is a rapid, systematic sweep of the areas where victims are most likely to be and least able to escape. Proximity to the fire and known occupant locations guide the search order.

  90. Question 90Fire Fighter I

    How does a finished foam blanket extinguish a flammable liquid fire?

    1. It cools the fuel below its ignition temperature by absorbing heat
    2. It chemically interrupts the combustion chain reaction
    3. It separates the fuel surface from the air and suppresses vapor Correct answer.
    4. It floods the room and displaces all available oxygen

    Explanation

    Foam forms a cohesive blanket that seals the liquid surface, cutting off oxygen and preventing the release of flammable vapors. Cooling is a secondary benefit, and reignition is prevented only while the blanket remains intact.

  91. Question 91Fire Fighter I

    What is the purpose of a sprinkler stop during overhaul?

    1. Testing the water flow alarm
    2. Draining water from the system after use
    3. Shutting off the main riser control valve
    4. Wedging an opened sprinkler head to stop the flow Correct answer.

    Explanation

    A sprinkler stop is driven into an open head to control water from that single head while the rest of the system remains ready to operate. Closing the main valve instead would leave the entire area unprotected.

  92. Question 92Fire Fighter I

    In a hose line of fixed size and length, friction loss increases in direct proportion to which value?

    1. The square root of the flow rate
    2. The pressure at the nozzle tip
    3. The flow rate itself
    4. The square of the flow rate Correct answer.

    Explanation

    Friction loss is calculated as a coefficient times the square of the flow times the length, so doubling the flow roughly quadruples the loss. This is why small increases in flow require large increases in pump pressure.

  93. Question 93Fire Fighter I

    What is the purpose of a pressure relief valve on a fire pump?

    1. To release excess pressure when discharges are closed or throttled Correct answer.
    2. To raise pressure to the highest handline demand
    3. To prevent water from flowing back into the hydrant
    4. To measure residual pressure in the supply main

    Explanation

    When nozzles are shut down, the pump can build pressure that stresses hose and injures crews, so the relief valve bypasses excess water. It protects the system rather than increasing output.

  94. Question 94Fire Fighter I

    When should a firefighter be assigned to rehabilitation at an incident?

    1. Only after the fire has been declared under control by the incident commander
    2. After two SCBA cylinders or about 45 minutes of heavy work Correct answer.
    3. Only when the firefighter reports dizziness or muscle cramps to a supervisor
    4. After four hours of continuous work at the incident scene without a break

    Explanation

    Rehabilitation is scheduled by workload rather than by waiting for symptoms, with commonly used triggers of two cylinders or roughly 45 minutes of strenuous effort. Early rotation restores hydration, cooling, and rest before performance and judgment degrade.

  95. Question 95Fire Fighter I

    Which hand tool is normally paired with a Halligan bar to make up a set of irons?

    1. Bolt cutters
    2. Pike pole
    3. Pick-head axe
    4. Flat-head axe Correct answer.

    Explanation

    The flat-head axe provides a striking surface that drives the Halligan's adz or fork into a gap, while the Halligan supplies the prying force. The two tools complement each other for forcible entry.

  96. Question 96Fire Fighter I

    A pumper supplies 200 feet of 1¾-inch hose flowing 150 gpm. Friction loss is 30 psi per 100 feet, the fog nozzle needs 100 psi at the tip, and the nozzle is 20 feet above the pump. Allowing 0.5 psi per foot of elevation gain, what pump discharge pressure is required?

    1. 170 psi Correct answer.
    2. 130 psi
    3. 190 psi
    4. 230 psi

    Explanation

    Required pressure is nozzle pressure plus friction loss plus elevation gain: 100 psi plus (30 psi × 2 lengths) plus (20 ft × 0.5 psi) equals 100 + 60 + 10, or 170 psi.

  97. Question 97Fire Fighter I

    On the fireground radio channel, when is the term emergency traffic used?

    1. Whenever a message is urgent enough to take priority over routine radio traffic Correct answer.
    2. When a company changes to a different tactical channel
    3. When a unit needs a routine progress check from command
    4. Only when a firefighter is lost or trapped inside the structure

    Explanation

    Emergency traffic clears the channel so that an urgent message can be transmitted without interruption; the message may be a Mayday or another serious safety concern such as a collapse or a burst line. A Mayday is reserved for a firefighter who is lost, trapped, or out of air.

  98. Question 98Fire Fighter I

    For which situation is a cellar nozzle most appropriate?

    1. Supplying water to a standpipe in a high-rise building
    2. Applying water into a basement through a small hole cut above Correct answer.
    3. Ventilating a cockloft before the ceiling is opened
    4. Cooling the rim of a flammable liquid storage tank

    Explanation

    A cellar nozzle is lowered through a small opening and spins to distribute water across a concealed space such as a basement or cockloft, so crews avoid entering an area that may be unsafe. It delivers water, not ventilation or supply.

  99. Question 99Fire Fighter I

    The rated duration marked on an SCBA cylinder is based on which condition?

    1. A firefighter exiting from the highest floor of a building
    2. A moderate breathing rate measured under test conditions Correct answer.
    3. A cylinder filled to half of its service pressure
    4. A firefighter working at maximum physical exertion

    Explanation

    Cylinder ratings come from laboratory testing at a moderate breathing rate, so real working time is always shorter than the number on the cylinder. Heavy exertion, stress, and cold increase air consumption and cut usable time further.

  100. Question 100Fire Fighter I

    During a hydrant flow test, static pressure reads 60 psi and residual pressure falls to 30 psi while a large flow is taken. What does this drop most likely indicate?

    1. The water main supplying the hydrant has limited capacity Correct answer.
    2. The pumper taking the flow is cavitating
    3. The static pressure reading was recorded incorrectly
    4. The hydrant drain valve is stuck open

    Explanation

    A large percentage drop between static and residual pressure shows that the supply main cannot sustain the flow without a steep pressure loss, so additional lines will be limited. A minor drop would indicate a strong main.

  101. Question 101Fire Fighter II

    At 0300, the first-arriving engine company finds a two-story dwelling with fire showing from a second-floor window. Under the incident command system, the company officer should:

    1. establish command and give a brief initial radio report Correct answer.
    2. enter the structure with the crew before announcing arrival
    3. request the next greater alarm before doing anything else
    4. wait for the chief officer to arrive before taking any action

    Explanation

    Command must be established by the first-arriving officer so the incident has one clearly accountable leader from the outset. A brief arrival report establishes command, describes conditions, and announces the initial strategy. Command can be transferred to a chief later, but it is not left vacant in the meantime.

  102. Question 102Fire Fighter II

    In the incident command system, the recommended span of control for one supervisor is:

    1. eight to twelve subordinates, with ten preferred
    2. two to five subordinates, with four preferred
    3. one to three subordinates, with two preferred
    4. three to seven subordinates, with five preferred Correct answer.

    Explanation

    ICS guidance holds that an effective span of control is three to seven subordinates, with five being the preferred number. When the span grows beyond that range, the supervisor should delegate through additional divisions, groups, or branches.

  103. Question 103Fire Fighter II

    Which building construction type is characterized by exterior walls of wood or other combustible material and is common in older residential neighborhoods?

    1. Type I, fire-resistive
    2. Type III, ordinary
    3. Type V, wood frame Correct answer.
    4. Type IV, heavy timber

    Explanation

    Type V construction has combustible exterior walls and structural members, typically wood frame, and is the most common construction type in North American residential occupancies. Its combustible structural elements make rapid fire spread and early collapse a real concern.

  104. Question 104Fire Fighter II

    In a systematic fire investigation, the first task is to:

    1. determine the area of origin Correct answer.
    2. collect samples of burned debris
    3. interview the owner about insurance coverage
    4. classify the fire as incendiary

    Explanation

    Cause determination begins with locating the area of origin, because the cause can only be established by examining the materials and conditions at that location. Interviews, classification, and sampling come later in the process.

  105. Question 105Fire Fighter II

    Which practice produces the clearest fireground radio messages?

    1. transmitting long, detailed reports whenever possible
    2. speaking in plain language at a moderate rate Correct answer.
    3. holding the microphone close and shouting into it
    4. using department-specific ten codes for every message

    Explanation

    Plain language at a moderate speaking rate keeps transmissions intelligible across agencies and reduces misunderstanding. Shouting distorts audio, codes may not be understood by mutual-aid companies, and long reports tie up the channel.

  106. Question 106Fire Fighter II

    Which sprinkler system keeps water in the piping at all times and discharges immediately when a head operates?

    1. wet-pipe system Correct answer.
    2. pre-action system
    3. dry-pipe system
    4. deluge system

    Explanation

    A wet-pipe system is charged with water under pressure at all times, so water discharges as soon as a sprinkler head fuses. The other systems either delay water entry or open all heads at once by design.

  107. Question 107Fire Fighter II

    At sea level, the practical maximum vertical lift for a pumper drafting from a static water source is about:

    1. 40 feet
    2. 25 feet Correct answer.
    3. 10 feet
    4. 50 feet

    Explanation

    Atmospheric pressure limits a practical drafting lift to about 25 feet at sea level, and the limit is lower at higher elevations or with a worn pump. Exceeding the limit causes cavitation and loss of prime.

  108. Question 108Fire Fighter II

    Before firefighters begin extricating a patient trapped in a car that is resting upright on its wheels, they should first:

    1. remove the doors with a hydraulic spreader
    2. drain the fuel tank completely
    3. begin packaging the patient inside the vehicle
    4. stabilize the vehicle with chocks and cribbing Correct answer.

    Explanation

    Vehicle stabilization comes before any cutting, spreading, or patient contact so the vehicle cannot shift and injure the patient or rescuers. Cribbing and chocks, and often a winch or strut, secure the vehicle against movement.

  109. Question 109Fire Fighter II

    Which item should be included in the briefing when command is transferred from one officer to another?

    1. the current situation, objectives, and safety concerns Correct answer.
    2. the estimated cost of the resources committed
    3. the names of media representatives on scene
    4. the incoming officer's rank and assignment history

    Explanation

    A transfer-of-command briefing must pass along the current incident situation, the objectives being pursued, and known safety concerns so the new commander can continue operations without interruption. Administrative details are not part of that briefing.

  110. Question 110Fire Fighter II

    Which task is assigned to the rapid intervention crew at a working fire?

    1. advancing a backup hoseline to the fire floor with the attack crew
    2. controlling traffic and spectators at the perimeter of the scene
    3. staying outside, equipped, ready to rescue trapped members Correct answer.
    4. performing overhaul in the seat of the fire with hand tools

    Explanation

    The rapid intervention crew stages outside the hazard area, fully equipped and with tools laid out, so it can deploy immediately to rescue a trapped or distressed firefighter. It is kept intact and is not assigned other fireground tasks.

  111. Question 111Fire Fighter II

    A firefighter inside a structure becomes disoriented, entangled, and low on air. The firefighter should:

    1. continue searching for the exit without notifying anyone
    2. transmit a MAYDAY with location and situation Correct answer.
    3. remove the SCBA facepiece to conserve air
    4. wait quietly in place for the RIT to find them

    Explanation

    A firefighter who is lost, trapped, or out of air must transmit a MAYDAY immediately, giving location, unit, name, and the nature of the problem. Early notification gives command time to deploy the RIT while the firefighter has air and consciousness remaining.

  112. Question 112Fire Fighter II

    Which tactic is appropriate for a fire in a below-grade basement served by a single interior stair?

    1. wait outside until the fire burns through the floor above the basement
    2. advance down the stairs quickly before the fire can spread upward
    3. open the basement windows from the inside before the attack begins
    4. control the stairs with a charged line while ventilation is coordinated Correct answer.

    Explanation

    The interior stair is the only way in and out, and it acts as a chimney for heat and smoke. A charged line is placed at the top of the stairs to protect the escape route, and ventilation is coordinated so the stair is not turned into a flow path before the attack team is ready.

  113. Question 113Fire Fighter II

    Which property of liquefied petroleum gas makes it likely to accumulate in low areas such as basements and utility vaults?

    1. its vapor is lighter than air
    2. it has no odor in its natural state
    3. its vapor is heavier than air Correct answer.
    4. it dissolves readily in water

    Explanation

    LP gas vapor is roughly 1.5 times as heavy as air, so it settles into low-lying spaces where it can reach flammable concentrations and find ignition sources. This is why gas detection is done at low levels and why structures are not entered for leaks.

  114. Question 114Fire Fighter II

    When applying foam to a burning pool of gasoline, the stream should be:

    1. directed straight down onto the fuel surface at close range
    2. swept rapidly back and forth across the surface of the fuel
    3. applied only after the fire has been knocked down with water
    4. deflected off an object so it blankets the surface gently Correct answer.

    Explanation

    Foam must float on the fuel surface to separate the fuel vapor from the air, so it is banked off a backboard, the ground, or the fire wall and allowed to spread. Plunging the stream directly into the fuel destroys the bubbles and submerges the blanket.

  115. Question 115Fire Fighter II

    Before a pumper supplies a building's fire department connection, the operator should:

    1. charge the connection at the pump's maximum rated pressure
    2. verify which system it serves and that it is not already charged Correct answer.
    3. close the building's main control valve to protect the system
    4. open the pumper's tank fill and dump valve fully

    Explanation

    The operator confirms which system the connection serves, that it is the correct connection, and that no other pumper is already supplying it. Supplying an FDC that is already charged or that serves a system with closed control valves can cause hose failure or leave the system without water.

  116. Question 116Fire Fighter II

    A pre-incident plan for a large commercial occupancy should include:

    1. the names of employees scheduled on each shift
    2. a list of tenants' telephone numbers
    3. the owner's insurance policy details
    4. access points, hydrant locations, and special hazards Correct answer.

    Explanation

    Pre-incident plans capture the tactical information needed at an incident, such as access routes, water supply, occupancy layout, and hazardous processes or materials. Personnel and administrative records do not support fireground decision making.

  117. Question 117Fire Fighter II

    Under the standard cause classifications, a fire whose cause cannot be established after a complete investigation is classified as:

    1. natural
    2. incendiary
    3. accidental
    4. undetermined Correct answer.

    Explanation

    The four classifications are accidental, natural, incendiary, and undetermined. When a thorough investigation fails to establish a cause, the fire is classified as undetermined rather than assigned a cause that the evidence does not support.

  118. Question 118Fire Fighter II

    During overhaul, the greatest concern to firefighters is:

    1. damage to contents from salvage covers
    2. water damage to the building contents
    3. loss of evidence from freeing trapped heat
    4. concealed fire extending into voids and concealed spaces Correct answer.

    Explanation

    Overhaul exists to find and extinguish hidden fire so it cannot reignite after crews leave. Wall cavities, ceilings, attics, and soffits must be opened and checked because fire can travel in these concealed spaces out of sight.

  119. Question 119Fire Fighter II

    The main purpose of salvage operations is to:

    1. remove smoke and heat from the structure
    2. reduce damage to property from water, smoke, and heat Correct answer.
    3. locate the area of origin of the fire
    4. provide a safe working area for investigators

    Explanation

    Salvage work protects property by covering contents, catching water, and controlling where runoff goes so damage from suppression efforts is minimized. Ventilation removes smoke and heat, and origin determination is an investigative function.

  120. Question 120Fire Fighter II

    At a trench collapse, the first priority is to:

    1. start removing spoil from the edge of the trench
    2. send rescuers into the trench to dig out the victim
    3. stabilize the scene and prevent a secondary collapse Correct answer.
    4. place a ladder into the trench for the victim

    Explanation

    Unstable soil can collapse again without warning and bury both rescuers and the victim. Fire Fighter II personnel at the operational level secure the scene, isolate the area, and call technician-level teams; entry and shoring require trench rescue technician training.

  121. Question 121Fire Fighter II

    A Fire Fighter II operating at the awareness level at a spill of an unknown liquid should:

    1. use a chlorine test kit to determine the product class
    2. recognize the hazard, isolate the area, and notify trained responders Correct answer.
    3. enter the hot zone to identify the product from its placard
    4. apply foam to any liquid spill to prevent ignition

    Explanation

    Awareness-level responders are limited to recognizing that a hazardous material is present, isolating the area, and notifying the proper authorities or trained hazmat personnel. They do not take offensive action, identify products by direct contact, or use field test kits.

  122. Question 122Fire Fighter II

    Which foam should be selected for a fire involving a polar solvent such as methyl alcohol?

    1. high-expansion foam
    2. alcohol-resistant aqueous film-forming foam Correct answer.
    3. regular protein foam
    4. standard aqueous film-forming foam

    Explanation

    Polar solvents destroy ordinary foam blankets, so an alcohol-resistant foam that forms a protective polymeric membrane is required. Standard AFFF, protein, and high-expansion foams break down when they contact alcohols and other water-miscible fuels.

  123. Question 123Fire Fighter II

    A Class III standpipe system provides:

    1. a dry system intended for unheated buildings only
    2. both occupant first-aid outlets and fire department outlets Correct answer.
    3. 2 1/2-inch connections for fire department use only
    4. 1 1/2-inch connections for occupant use only

    Explanation

    Class III systems combine the 1 1/2-inch occupant first-aid outlets of a Class II system with the 2 1/2-inch heavy-stream outlets of a Class I system. Class I is for fire department use only, and Class II is for occupant use only.

  124. Question 124Fire Fighter II

    Which construction type relies on unprotected steel columns and beams and can fail suddenly when heated by fire?

    1. Type III, ordinary
    2. Type V, wood frame
    3. Type II, noncombustible Correct answer.
    4. Type IV, heavy timber

    Explanation

    In Type II noncombustible construction the steel is often unprotected and can elongate and fail at temperatures reached in an ordinary contents fire. This produces local or total collapse with little or no warning, so crews must watch for sagging, cracking, and steel elongation.

  125. Question 125Fire Fighter II

    How does an outside stem and yoke (OS&Y) valve indicate its open or closed position?

    1. a colored plate that rotates with the handwheel
    2. a pressure gauge mounted on the valve body
    3. a fusible link that melts at a set temperature
    4. the position of the threaded stem relative to the yoke Correct answer.

    Explanation

    On an OS&Y valve the threaded stem moves outward as the valve opens, so the amount of stem visible above the yoke shows the valve position at a glance. This makes it the preferred indicating valve for sprinkler and standpipe control.

  126. Question 126Fire Fighter II

    In Type IV heavy-timber construction, fire resistance is provided mainly by:

    1. gypsum board applied to all surfaces
    2. steel columns protected by concrete
    3. large dimensions of wood members Correct answer.
    4. sprayed-on cementitious fireproofing

    Explanation

    Heavy-timber construction relies on the mass and large cross section of wood members to resist fire and retain strength. It does not depend on surface coatings or steel protection for its fire resistance.

  127. Question 127Fire Fighter II

    A Class I standpipe system provides:

    1. a combined system for occupants and sprinklers
    2. a dry system only for outdoor use
    3. 2½-inch connections for fire department use Correct answer.
    4. 1½-inch hose stations for occupant use

    Explanation

    Class I standpipes are intended for fire department use and have 2½-inch connections for heavy hose lines. Class II systems serve occupants, and Class III systems combine both features.

  128. Question 128Fire Fighter II

    In a dry pipe sprinkler system, the piping normally contains:

    1. nothing but a vacuum
    2. water under pressure
    3. pressurized air or nitrogen Correct answer.
    4. a pre-mixed foam solution

    Explanation

    A dry pipe system keeps water out of the piping by maintaining pressurized air or nitrogen behind a dry pipe valve. When a sprinkler operates, the air escapes, the valve opens, and water enters the piping.

  129. Question 129Fire Fighter II

    To identify an unknown hazardous material from its four-digit UN number, a firefighter should consult the:

    1. Emergency Response Guidebook Correct answer.
    2. material safety data sheet on file
    3. building occupancy permit
    4. NFPA 704 hazard diamond

    Explanation

    The Emergency Response Guidebook contains a numerical index that matches four-digit UN identification numbers to guide pages. The guide then provides initial isolation distances and protective actions.

  130. Question 130Fire Fighter II

    When opening a fire hydrant, the valve should be opened slowly to:

    1. prevent water hammer in the main Correct answer.
    2. allow the steamer cap to be removed safely
    3. increase the pressure at the nozzle
    4. flush sediment from the barrel

    Explanation

    Opening a hydrant slowly allows the water main to adjust gradually and prevents a pressure surge known as water hammer. Rapid opening can damage the main or the hydrant.

  131. Question 131Fire Fighter II

    The most effective location for a vertical ventilation opening is:

    1. on the windward side at ground level
    2. the lowest floor of the structure
    3. directly over the fire area Correct answer.
    4. in an attached garage

    Explanation

    Vertical ventilation works best when the opening is made as directly over the fire as possible. Hot fire gases rise and can then escape through the opening.

  132. Question 132Fire Fighter II

    When using a radio at an emergency scene, a firefighter should:

    1. use codes that only the department understands
    2. hold the microphone against the speaker
    3. use clear text and speak slowly Correct answer.
    4. speak rapidly to save air time

    Explanation

    Effective radio communication uses clear text and a slow, controlled speaking rate so the message is understood. Department-specific codes can confuse personnel from other agencies.

  133. Question 133Fire Fighter II

    Downed electrical wires at a fire scene should be treated as:

    1. de-energized after dark
    2. safe if they are not sparking
    3. energized Correct answer.
    4. grounded if touching pavement

    Explanation

    Downed wires must be considered energized until the utility company confirms they are de-energized. Firefighters should establish a safe perimeter and keep all personnel away.

  134. Question 134Fire Fighter II

    The recommended span of control for an incident commander at a structural fire is:

    1. as many as can be supervised by radio
    2. three to seven, with five preferred Correct answer.
    3. one subordinate only
    4. ten to fifteen subordinates

    Explanation

    Incident command systems use a span of control of roughly three to seven subordinates, with five considered optimal. This range allows effective supervision and communication.

  135. Question 135Fire Fighter II

    Before cutting near an undeployed airbag, firefighters should:

    1. puncture the inflator to release pressure
    2. disconnect the battery and wait Correct answer.
    3. spray the airbag module with water
    4. remove the steering wheel first

    Explanation

    Supplemental restraint systems store energy in capacitors, so the battery should be disconnected and the manufacturer-recommended wait time observed. This reduces the chance of accidental deployment during extrication.

  136. Question 136Fire Fighter II

    The attendant at a confined-space entry is responsible for:

    1. entering the space to rescue a worker
    2. operating the ventilation equipment only
    3. track entrants and call for rescue Correct answer.
    4. supervising the fire attack

    Explanation

    The attendant remains outside the space, tracks each entrant, maintains communication, and summons rescue if conditions change. The attendant does not enter the space to perform the rescue.

  137. Question 137Fire Fighter II

    A fire with multiple separate origins and no accidental ignition source is most likely classified as:

    1. natural
    2. undetermined
    3. incendiary Correct answer.
    4. accidental

    Explanation

    Multiple independent points of origin strongly suggest intentional setting, which supports an incendiary classification. A single accidental source would not normally produce separate origins.

  138. Question 138Fire Fighter II

    During overhaul, a pike pole is most often used to:

    1. spray water into hidden voids
    2. cut through metal roof decking
    3. pull ceilings and open walls Correct answer.
    4. ventilate with positive pressure

    Explanation

    A pike pole is designed for pulling and reaching, making it useful for opening ceilings and walls to expose hidden fire. Metal cutting and water application require other tools.

  139. Question 139Fire Fighter II

    In a reverse hose lay, the pumper is positioned at the:

    1. hydrant and uses only a deck gun
    2. fire and lays hose to the water source Correct answer.
    3. midpoint and lays hose in both directions
    4. water source and lays hose toward the fire

    Explanation

    A reverse lay places the pumper at the fire scene and lays hose from the fire toward the water source. A forward lay places the pumper at the water source and lays hose toward the fire.

  140. Question 140Fire Fighter II

    A combination nozzle is designed to:

    1. produce only a fog pattern
    2. adjust from straight to fog Correct answer.
    3. produce only a straight stream
    4. supply foam concentrate directly

    Explanation

    A combination nozzle can be adjusted by the operator to produce patterns ranging from a straight stream to fog. This versatility allows it to be matched to the fire conditions.

  141. Question 141Fire Fighter II

    For maximum protection, smoke alarms should be installed:

    1. in the basement only, near the furnace
    2. in hall closets only, behind the door
    3. in the kitchen only, above the stove
    4. each level and near bedrooms Correct answer.

    Explanation

    Smoke alarms should be placed on every level of the home and outside sleeping areas to provide early warning. Proper placement gives occupants time to escape regardless of where a fire starts.

  142. Question 142Fire Fighter II

    A critical fire protection feature in a commercial cooking operation is:

    1. a sump pump
    2. a hood suppression system Correct answer.
    3. a carbon monoxide detector
    4. a grease trap alarm

    Explanation

    Commercial cooking creates hot grease-laden vapors that can ignite in the hood and duct system. A hood suppression system is designed to protect this specific hazard.

  143. Question 143Fire Fighter II

    After a fire is knocked down, evidence of the fire's origin should be:

    1. watered down to prevent rekindle
    2. moved to the apparatus for safekeeping
    3. protected and left for the investigator Correct answer.
    4. cleaned up immediately

    Explanation

    Origin evidence must be preserved so that a cause investigator can examine it in place. Moving or destroying evidence can make the cause impossible to determine.

  144. Question 144Fire Fighter II

    Which set of conditions most suggests a potential backdraft?

    1. cool interior with sprinkler discharge
    2. high heat with a visible flame
    3. heavy smoke, high heat, and puffing Correct answer.
    4. light smoke and an open door

    Explanation

    A backdraft is likely when a fire is oxygen-starved, producing heavy smoke and high heat with smoke puffing or being drawn back at openings. Introducing air suddenly can cause an explosive ignition.

  145. Question 145Fire Fighter II

    A 30-minute-rated SCBA cylinder will usually provide less than 30 minutes of air because:

    1. the regulator wastes air
    2. the mask leaks
    3. exertion increases breathing rate Correct answer.
    4. the cylinder is only partly filled

    Explanation

    The rated duration assumes a moderate breathing rate, but firefighting exertion increases oxygen demand and breathing rate. Therefore, the actual usable time is often shorter than the cylinder rating.

  146. Question 146Fire Fighter II

    A major collapse concern in a lightweight wood-frame building during a fire is:

    1. melting of gypsum wallboard on the ceilings
    2. rusting of steel studs behind the walls
    3. spalling of the brick veneer on the façade
    4. unprotected floor joists and trusses fail Correct answer.

    Explanation

    Lightweight wood joists and trusses can fail quickly when exposed to fire because they have little mass and are often unprotected. Firefighters should avoid operating over or under these members when fire involvement is suspected.

  147. Question 147Fire Fighter II

    The incident safety officer's primary function is to:

    1. operate the pump
    2. direct the fire attack
    3. conduct the cause investigation
    4. monitor conditions and advise command Correct answer.

    Explanation

    The incident safety officer watches conditions, identifies hazards, and advises the incident commander on safety matters. The role is advisory and does not take over fire attack or cause investigation.

  148. Question 148Fire Fighter II

    A foam with an expansion ratio greater than 200:1 is classified as:

    1. medium-expansion foam
    2. protein foam
    3. low-expansion foam
    4. high-expansion foam Correct answer.

    Explanation

    Foam expansion ratios are grouped as low, medium, and high. High-expansion foam has an expansion ratio greater than 200:1 and is used for total flooding of enclosed spaces.

  149. Question 149Fire Fighter II

    A fire department connection on a building supplies water to:

    1. the sanitary sewer
    2. the irrigation system
    3. the building's domestic water system
    4. standpipe or sprinkler system Correct answer.

    Explanation

    A fire department connection allows a pumper to supplement the building's fire protection system, typically the standpipe or sprinkler piping. It is not connected to plumbing fixtures or drainage.

  150. Question 150Fire Fighter II

    During a fire safety inspection, blocked exit doors are a concern because they:

    1. delay evacuation in an emergency Correct answer.
    2. increase the amount of water damage
    3. cause false alarms in detection systems
    4. reduce the pressure in sprinkler systems

    Explanation

    Exit doors must remain unobstructed so occupants can leave quickly during a fire or other emergency. Blocked exits can cause crowding, delay, and injury during evacuation.

  151. Question 151Fire Fighter II

    At a structure fire, the first-arriving company officer establishes command. Command should be transferred to a later-arriving officer only after:

    1. a formal briefing that includes incident conditions, actions taken, and assigned units Correct answer.
    2. the first officer's company is reassigned to fire attack
    3. the later-arriving officer announces arrival on the radio
    4. the incident has been declared under control

    Explanation

    Command transfer is a formal process; the incoming officer must receive a briefing covering conditions, actions taken, and units assigned before assuming command. Rank alone does not transfer command, and command continues until the incident is terminated.

  152. Question 152Fire Fighter II

    An SCBA PASS device is intended to:

    1. sound an alarm if the wearer becomes motionless Correct answer.
    2. provide voice amplification through the facepiece
    3. filter carbon monoxide from the cylinder air
    4. regulate the pressure delivered to the facepiece

    Explanation

    The PASS device is a personal alert safety system that sounds a loud alarm when the wearer remains motionless for a set period, helping rescuers locate a downed firefighter. It does not filter air, regulate pressure, or amplify voice.

  153. Question 153Fire Fighter II

    When using a portable fire extinguisher, the correct sequence for the PASS technique is:

    1. Prepare, Approach, Sweep, Stop
    2. Pull, Aim, Squeeze, Sweep Correct answer.
    3. Press, Assess, Spray, Standby
    4. Point, Alert, Spray, Secure

    Explanation

    PASS stands for Pull the pin, Aim at the base of the fire, Squeeze the handle, and Sweep the nozzle side to side. The other sequences are not recognized extinguisher techniques.

  154. Question 154Fire Fighter II

    For a window rescue, the tip of a ground ladder should be placed:

    1. at or slightly above the sill and into the window opening Correct answer.
    2. level with the bottom of the window frame
    3. against the wall below the window
    4. just below the window sill

    Explanation

    For a window rescue, the ladder tip should be at or slightly above the sill and extend into the opening so a firefighter can step off safely and have a handhold. Placing it below the sill makes entry difficult and unstable.

  155. Question 155Fire Fighter II

    A 1¾-inch hose line is most commonly used as:

    1. a master stream appliance line
    2. a supply line from a hydrant to a pumper
    3. an attack line for interior structural firefighting Correct answer.
    4. a standpipe system supply line

    Explanation

    A 1¾-inch hose is the common attack line for interior structural firefighting because it balances maneuverability with adequate flow. Supply lines and master stream lines are generally larger.

  156. Question 156Fire Fighter II

    A life-safety rope that has been subjected to a shock load should be:

    1. used only for hoisting tools
    2. inspected and returned to service if no visible damage is found
    3. shortened by cutting off the damaged end
    4. removed from service for life-safety use Correct answer.

    Explanation

    A shock load can damage rope fibers internally even when no visible damage is apparent, so the rope must be removed from life-safety use. It should not be returned to service, downgraded for hoisting, or repaired by cutting.

  157. Question 157Fire Fighter II

    The primary purpose of salvage operations at a fire scene is to:

    1. reduce property damage from water, smoke, and debris Correct answer.
    2. provide emergency lighting for overhaul
    3. locate and preserve evidence of fire cause
    4. improve ventilation of the fire building

    Explanation

    Salvage protects property by limiting water, smoke, and debris damage after the fire is controlled. It is separate from cause investigation, ventilation, and lighting.

  158. Question 158Fire Fighter II

    In fire cause classification, a fire that is intentionally set is classified as:

    1. accidental
    2. incendiary Correct answer.
    3. undetermined
    4. natural

    Explanation

    In fire cause classification, an intentionally set fire is classified as incendiary. Accidental, natural, and undetermined are different cause classifications.

  159. Question 159Fire Fighter II

    A preincident plan for a commercial building should include:

    1. the fire department's annual budget
    2. the names of all employees on each shift
    3. the owner's insurance policy number
    4. access points, water supply, and building layout Correct answer.

    Explanation

    Preincident plans give responders tactical information such as access, water supply, building layout, and hazards. Employee names, insurance numbers, and budgets are not part of the tactical plan.

  160. Question 160Fire Fighter II

    The primary responsibility of a rapid intervention team at a working fire is to:

    1. stand by with equipment to rescue trapped or lost firefighters Correct answer.
    2. operate the pumper at the water supply
    3. conduct the primary search of the fire floor
    4. assist with fire attack on the upper floors

    Explanation

    The rapid intervention team is a dedicated rescue crew standing by to locate and remove trapped or lost firefighters. It does not perform fire attack, pump operations, or primary search.

  161. Question 161Fire Fighter II

    When applying foam to a polar solvent such as alcohol, firefighters should use:

    1. alcohol-resistant foam Correct answer.
    2. ordinary Class A foam
    3. protein foam
    4. fluoroprotein foam

    Explanation

    Polar solvents such as alcohol break down ordinary foams, so alcohol-resistant foam is required. Protein, fluoroprotein, and Class A foams are not designed for polar solvents.

  162. Question 162Fire Fighter II

    A propane cylinder is involved in fire and is venting flame. Firefighters should first:

    1. cool the cylinder from a protected position and evacuate the area Correct answer.
    2. extinguish the flame with a fog stream
    3. plug the relief valve to stop the leak
    4. move the cylinder by hand to an open area

    Explanation

    A propane cylinder venting flame can BLEVE; firefighters should cool it from a protected position and evacuate the area. They should not extinguish the flame unless the leak can be stopped, move a hot cylinder, or plug the relief valve.

  163. Question 163Fire Fighter II

    Before using hydraulic extrication tools on a crashed vehicle, firefighters should:

    1. raise the vehicle with a jack
    2. remove the windshield glass first
    3. stabilize the vehicle with cribbing and chocks Correct answer.
    4. cut the battery cable before cribbing

    Explanation

    Stabilizing the vehicle with cribbing and chocks prevents movement while tools are used and protects both victims and rescuers. Other actions may be necessary later but do not replace stabilization.

  164. Question 164Fire Fighter II

    When forcing an inward-opening door, the firefighter should:

    1. control the door and force it near the latch with a prying tool Correct answer.
    2. cut a hole through the center of the door
    3. pull the door outward with a hook
    4. strike the hinges to remove the door

    Explanation

    For an inward-opening door, the hinges are not accessible from the exterior, so firefighters pry near the latch. Controlling the door prevents a sudden inrush of air that could intensify the fire.

  165. Question 165Fire Fighter II

    Horizontal ventilation should be coordinated with fire attack so that:

    1. the ventilation opening is made before the hose line is charged
    2. the building is sealed to starve the fire
    3. all windows on all floors are opened at once
    4. the fire is vented away from trapped occupants and toward the exterior Correct answer.

    Explanation

    Horizontal ventilation must be coordinated with fire attack so heat and smoke are channeled away from occupants and toward the exterior. Premature or indiscriminate opening can intensify the fire and spread products of combustion.

  166. Question 166Fire Fighter II

    In a relay pumping operation, the primary reason for using a large-diameter hose between pumpers is to:

    1. reduce friction loss and increase flow capacity Correct answer.
    2. reduce the need for a water source
    3. increase nozzle reaction
    4. allow the use of lower pump pressures at the nozzle

    Explanation

    Large-diameter hose has lower friction loss, so relay pumpers can move more water with less pressure loss. It does not increase nozzle reaction or eliminate the need for a water source.

  167. Question 167Fire Fighter II

    A firefighter who becomes trapped inside a burning building should transmit a MAYDAY and then:

    1. remove the SCBA facepiece to call for help
    2. activate the PASS device and provide location and situation Correct answer.
    3. remain silent to conserve radio traffic
    4. continue fire attack alone

    Explanation

    A trapped firefighter should transmit a MAYDAY with location, situation, and air supply, and activate the PASS device. Staying silent, continuing alone, or removing the facepiece worsens the emergency.

  168. Question 168Fire Fighter II

    A bowstring truss roof is especially dangerous to firefighters because:

    1. it is only found in high-rise buildings
    2. it is required to be fire-resistive
    3. it can collapse suddenly without visible warning Correct answer.
    4. it cannot support a ventilation opening

    Explanation

    Bowstring trusses can fail suddenly with little visible warning, creating a large collapse zone. Firefighters should avoid operating beneath them when fire involvement is suspected.

  169. Question 169Fire Fighter II

    When preparing to use a high-rise standpipe system, firefighters should:

    1. verify the standpipe valves are open and bleed air from the line Correct answer.
    2. connect the attack line before opening any valves
    3. remove the standpipe hose valves to increase flow
    4. assume the system is already charged and flow water immediately

    Explanation

    Before flowing water, firefighters should confirm standpipe valves are open and bleed air from the line to prevent pressure surges and water hammer. The system should not be assumed charged.

  170. Question 170Fire Fighter II

    In the Emergency Response Guidebook, the orange-bordered pages are used to:

    1. list emergency contact phone numbers
    2. identify the chemical by name
    3. provide isolation distances for all chemicals
    4. find initial response guides by guide number Correct answer.

    Explanation

    The orange-bordered pages of the ERG contain the initial response guides, organized by guide number. Chemical names are in the blue pages and identification numbers in the yellow pages.

  171. Question 171Fire Fighter II

    During overhaul, a thermal imager shows a bright hotspot on a wall. Before opening the wall, the firefighter should consider that:

    1. the hotspot always indicates active fire behind the wall
    2. a bright image may be a reflection from a hot surface and should be verified Correct answer.
    3. thermal imagers cannot detect hidden fire
    4. the imager confirms the wall is safe to touch

    Explanation

    Thermal imagers can show reflected heat as well as actual hot surfaces, so a bright spot should be verified before opening. The imager does not confirm a wall is safe to touch or always prove active fire.

  172. Question 172Fire Fighter II

    At a fire involving a roof-mounted solar photovoltaic system, the primary electrical hazard is that:

    1. the panels are safe to touch because they are grounded
    2. the panels stop producing power once the utility service is disconnected
    3. conductors on the array side may remain energized after the utility disconnect Correct answer.
    4. the array automatically shuts down when smoke is detected

    Explanation

    Photovoltaic modules generate electricity whenever light strikes them, so array-side conductors may remain energized after the utility service is disconnected. Grounding does not make touching them safe, and smoke does not automatically shut them down.

  173. Question 173Fire Fighter II

    Using the National Fire Academy fire flow formula, what is the approximate required fire flow for a single-story building measuring 30 feet by 60 feet?

    1. 1,800 gpm
    2. 300 gpm
    3. 450 gpm
    4. 600 gpm Correct answer.

    Explanation

    The National Fire Academy fire flow formula is length times width divided by three, times the number of floors. For 30 by 60 feet, 1,800 divided by 3 equals 600 gpm for one story.

  174. Question 174Fire Fighter II

    When searching a collapsed building, a void space is best described as:

    1. the open area outside the collapse zone
    2. a space filled with smoke but no structural damage
    3. a pocket of survivable space created by collapsed structural members Correct answer.
    4. an area that has been cleared of all debris

    Explanation

    A void is a pocket of survivable space formed by collapsed structural members, and it is a priority search area. It is not simply cleared debris, open outside area, or smoke-filled undamaged space.

  175. Question 175Fire Fighter II

    For a foam eductor to pick up concentrate properly, the hose between the eductor and the nozzle should be:

    1. looped to create back pressure
    2. the same diameter as the supply line
    3. at least 200 feet long
    4. kept as short and straight as possible Correct answer.

    Explanation

    Foam eductors rely on a pressure difference to draw concentrate, so the discharge hose should be kept short and straight. Back pressure from loops, long lines, or elevation reduces pickup.

  176. Question 176Fire Fighter II

    Under the Incident Command System, the recommended span of control for a supervisor is generally:

    1. three to seven subordinates, with five being optimal Correct answer.
    2. as many subordinates as the supervisor can personally name
    3. one to two subordinates, with one being optimal
    4. eight to twelve subordinates, with ten being optimal

    Explanation

    Span of control is the number of subordinates who report directly to one supervisor. A range of three to seven, with five as the working optimum, keeps supervision effective without overloading the supervisor.

  177. Question 177Fire Fighter II

    When the first-arriving company officer arrives at a working fire, that officer should:

    1. begin fire attack without establishing command
    2. assign command to the driver/operator
    3. wait for the battalion chief before establishing command
    4. assume command and announce it over the radio Correct answer.

    Explanation

    Command must be established by the first-arriving officer and communicated so all units know who is in charge. Command may be transferred later, but the initial announcement prevents freelancing and confusion.

  178. Question 178Fire Fighter II

    A firefighter trained to the operations level at a hazardous materials incident is expected to:

    1. enter the hot zone without chemical protective clothing
    2. conduct offensive operations to stop the release
    3. take defensive actions to contain the release from a safe distance Correct answer.
    4. identify the material and predict its behavior without reference sources

    Explanation

    Operations-level responders perform defensive actions such as containment, confinement, and diking from outside the hot zone. Offensive actions to stop a release require technician-level training and equipment.

  179. Question 179Fire Fighter II

    Smoke alarms in a residence should be tested:

    1. only when the battery is replaced
    2. at least once a month Correct answer.
    3. whenever the occupant smells smoke
    4. once every five years

    Explanation

    Manufacturers and fire safety educators recommend testing smoke alarms monthly to verify that the alarm and battery are functioning. Testing only after a problem is noticed defeats the purpose of early warning.

  180. Question 180Fire Fighter II

    When stabilizing a vehicle on its wheels before extrication, firefighters should first:

    1. place cribbing under the bumpers only
    2. deflate all four tires
    3. chock the wheels and set the parking brake Correct answer.
    4. remove the steering wheel

    Explanation

    A vehicle on its wheels is stabilized by preventing movement, beginning with wheel chocks and the parking brake. Cribbing is then added as needed to prevent suspension movement and shifting.

  181. Question 181Fire Fighter II

    In a forward hose lay, the pumper stops at the water source and:

    1. connects directly to the fire department connection
    2. lays hose from the fire back to the source
    3. uses only booster hose
    4. lays hose from the water source toward the fire Correct answer.

    Explanation

    A forward lay begins at the water source and proceeds toward the fire, with the pumper stopping at the hydrant or other source. This layout allows the attack pumper to connect to the hydrant and supply the fireground.

  182. Question 182Fire Fighter II

    The V-shaped char pattern on a wall most commonly indicates that:

    1. an accelerant was poured along the floor
    2. the fire was intentionally set
    3. fire spread upward from a point near the wall base Correct answer.
    4. the wall was protected by a sprinkler system operating correctly

    Explanation

    A V pattern results from fire spreading upward and outward from a lower point of origin, leaving heavier char near the base. Investigators use the pattern with other evidence rather than as proof of cause.

  183. Question 183Fire Fighter II

    A fire department connection on a building's sprinkler system is used to:

    1. test the system's alarm bell
    2. provide domestic water to the building
    3. supplement the system's water supply from a pumper Correct answer.
    4. drain the system after a fire

    Explanation

    The fire department connection allows a pumper to add water to the sprinkler or standpipe system when the building supply is inadequate. It is a supplemental supply point, not a drain or domestic water connection.

  184. Question 184Fire Fighter II

    In emergency radio communications, the use of plain language (clear text) is preferred because it:

    1. keeps transmissions shorter than codes
    2. prevents the public from hearing sensitive information
    3. reduces confusion among agencies using different codes Correct answer.
    4. is required only for fireground tactical channels

    Explanation

    Plain language is understood across agencies and jurisdictions, while codes may mean different things to different responders. Clear text supports common understanding during multi-agency incidents.

  185. Question 185Fire Fighter II

    An accountability system at an incident is intended primarily to:

    1. track the cost of apparatus and personnel
    2. document the fire cause for investigators
    3. record the time each unit arrives
    4. account for the identity and location of personnel Correct answer.

    Explanation

    Accountability systems track who is on the incident and where they are assigned so that personnel can be accounted for during emergencies. Cost tracking, cause documentation, and arrival times are separate functions.

  186. Question 186Fire Fighter II

    When performing vertical ventilation on a pitched roof, the opening should be made:

    1. near the highest point, ideally over the fire area Correct answer.
    2. on the windward side of the structure
    3. at the lowest point of the roof
    4. directly over the front door

    Explanation

    Vertical ventilation is most effective when the opening is at the highest point so hot gases and smoke can escape upward. Placing it over the fire area helps channel the products of combustion out of the structure.

  187. Question 187Fire Fighter II

    A ground ladder is being placed for a second-floor rescue. The tip of the ladder should normally extend:

    1. one rung above the ground
    2. three rungs below the windowsill
    3. a few rungs above the windowsill or roof edge Correct answer.
    4. exactly level with the windowsill

    Explanation

    The ladder tip should extend above the sill or roof edge so firefighters have a handhold when entering or exiting. This also gives a safer transition from the ladder to the building.

  188. Question 188Fire Fighter II

    Friction loss in a hose line is affected by the:

    1. diameter and length of the hose, and the flow rate Correct answer.
    2. age of the nozzle operator
    3. number of couplings on the apparatus
    4. color of the hose jacket

    Explanation

    Friction loss increases with longer hose, smaller hose diameter, and higher flow rates. These are the primary physical factors used in pump pressure calculations.

  189. Question 189Fire Fighter II

    When using a foam eductor, the correct operating principle is that the:

    1. eductor works best with the nozzle above the eductor
    2. water stream creates a Venturi that draws concentrate in Correct answer.
    3. nozzle must be a fog nozzle set to wide fog
    4. foam concentrate is pumped directly into the pump intake

    Explanation

    An eductor uses a Venturi effect: water flowing through a narrow section creates a low-pressure area that draws foam concentrate into the stream. The concentrate is then mixed with water to form the foam solution.

  190. Question 190Fire Fighter II

    A building with a lightweight engineered wood I-joist floor system is especially dangerous during fire operations because the joists:

    1. are protected by a noncombustible coating
    2. resist fire better than solid lumber
    3. fail only after the floor covering burns through
    4. can lose structural strength quickly when exposed to fire Correct answer.

    Explanation

    Lightweight engineered wood members can lose strength rapidly under fire exposure and may fail with little warning. Firefighters should avoid operating over or under such floor systems when fire is suspected.

  191. Question 191Fire Fighter II

    During overhaul, the greatest risk from concealed fire in a void space is that it may:

    1. reduce water damage to the structure
    2. improve ventilation for the building
    3. set off the building's fire alarm
    4. rekindle after crews leave the scene Correct answer.

    Explanation

    Concealed fire can remain in hidden spaces and rekindle after suppression crews believe the fire is out. Overhaul must expose void spaces and check for heat so the fire is fully extinguished.

  192. Question 192Fire Fighter II

    A fire inspector conducting a routine inspection of a business should first:

    1. require the owner to close the business
    2. issue a citation for every violation found
    3. turn off the building's fire alarm system
    4. identify the occupancy and applicable fire code requirements Correct answer.

    Explanation

    The inspector must first determine the occupancy type and the fire code requirements that apply to it. Violations are then evaluated against those requirements, and enforcement action follows established procedures.

  193. Question 193Fire Fighter II

    In a high-rise building, a pressure-reducing valve on a standpipe outlet is installed to:

    1. prevent water from entering the system
    2. automatically start the building fire pump when flow begins
    3. limit outlet pressure to a safe level for crews Correct answer.
    4. increase the water pressure at the top floor

    Explanation

    Pressure-reducing valves control the pressure at standpipe outlets so firefighters can handle handlines safely. Without them, lower-floor outlets can have excessive pressure in a tall building.

  194. Question 194Fire Fighter II

    A firefighter operating a handline in a compartment with deteriorating conditions should:

    1. exit if conditions worsen and report it Correct answer.
    2. ignore changes in heat and smoke
    3. open the nozzle fully and leave it flowing
    4. remain in the compartment until the fire is out

    Explanation

    Firefighters must monitor heat, smoke, and structural conditions and withdraw when conditions become unsafe. Reporting the change allows command to adjust tactics and account for personnel.

  195. Question 195Fire Fighter II

    When a fire involves a roof-mounted solar photovoltaic array, the safest approach for firefighters is to:

    1. cut the array cables to de-energize the roof
    2. spray water directly on the panels to cool them
    3. treat all wiring as energized and avoid touching it Correct answer.
    4. assume the system is off after the main switch is opened

    Explanation

    Photovoltaic modules generate electricity whenever they are exposed to light, so wiring may remain energized even after the main switch is opened. Firefighters should avoid contact and use established electrical safety practices.

  196. Question 196Fire Fighter II

    The purpose of a rapid intervention team's outside-in survey is to:

    1. extinguish the fire from the exterior
    2. identify entry points, windows, and possible rescue routes Correct answer.
    3. remove salvageable contents
    4. operate the aerial ladder

    Explanation

    The outside-in survey gives the rapid intervention team a picture of the building before an emergency, including access points and rescue routes. This information supports a fast rescue if a firefighter becomes trapped.

  197. Question 197Fire Fighter II

    A collapsed building search marking system uses a single slash to indicate that:

    1. a hazardous material is present
    2. a search has been completed and no victims were found
    3. search operations are in progress at that location Correct answer.
    4. the building is safe to enter

    Explanation

    In the common search marking system, a single slash means a search is in progress. A completed search is typically marked with an X or additional information.

  198. Question 198Fire Fighter II

    When a sprinkler head has activated and the fire is out, firefighters should:

    1. leave the system flowing until the building is reoccupied
    2. open all other sprinkler heads to drain the system
    3. turn off the main drain and leave the system
    4. shut down the system after the fire is confirmed out Correct answer.

    Explanation

    Sprinkler systems should remain in service during firefighting and be shut down only after the fire is confirmed out. The responsible party should then be notified so the system can be restored.

  199. Question 199Fire Fighter II

    A firefighter who finds a closed door with a hot door handle during a search should:

    1. open the door immediately and enter upright
    2. stay low, check for heat, and open the door cautiously Correct answer.
    3. force the door with a sledgehammer from a standing position
    4. ignore the door and continue past it

    Explanation

    A hot door indicates fire on the other side, so firefighters should stay low, check for heat, and use a controlled opening procedure. This prevents an uncontrolled fire influx and allows the crew to assess conditions before entering.

NFPA Firefighter I flashcards

32 cards. Read the term and the definition here. The deck at the top of this page is optional.

Fire tetrahedron
The four components needed for combustion are fuel, oxygen, heat, and an uninhibited chemical chain reaction; removing any one stops the fire.
Flash point
Lowest temperature at which a liquid releases enough vapor to form an ignitable mixture near its surface, but combustion does not continue.
Fire point
Temperature at which a liquid releases vapors fast enough to sustain continuous combustion after ignition; it is slightly higher than the flash point.
Class A fire
Fire involving ordinary combustibles such as wood, paper, cloth, and plastics; water and ABC dry chemical are effective extinguishing agents.
Class B fire
Fire involving flammable or combustible liquids and gases; foam, carbon dioxide, and dry chemical can smother or inhibit combustion.
Class C fire
Fire involving energized electrical equipment; de-energize the circuit when possible, then use a nonconductive extinguishing agent such as carbon dioxide.
Class D fire
Fire involving combustible metals such as magnesium or sodium; use a compatible dry powder and avoid water, which can react violently.
Class K fire
Fire involving cooking oils or fats in commercial cooking equipment; wet chemical agent saponifies the fat and cools the surface.
PASS technique
Extinguisher operation sequence: Pull the pin, Aim at the base of the fire, Squeeze the handle, and Sweep the nozzle side to side.
Four-to-one ladder rule
Place the base of a ground ladder one foot from the building for every four feet of vertical height, producing about a 75-degree angle.
Roof ladder extension
For roof access, extend a ground ladder three to five rungs above the roof edge so firefighters can step safely onto the roof.
Primary search
Rapid, systematic search for victims in the immediate fire area and likely exit paths, often conducted before fire control is complete.
Thermal layering
Hot combustion gases collect at the ceiling while cooler air remains near the floor; firefighters stay low to avoid high heat and smoke.
Backdraft
Explosive ignition of heated, fuel-rich gases when oxygen suddenly enters a confined space; indicators include heavy smoke and inward air movement.
Vertical ventilation
Opening the highest point of a structure while providing a lower inlet; hot smoke and gases escape upward and conditions improve inside.
Water-to-steam expansion
One gallon of water converted to steam expands to about 1,700 gallons, absorbing large amounts of heat from the fire.
Two-in/two-out rule
At least two firefighters enter an IDLH atmosphere together while two trained and equipped firefighters remain outside ready to rescue them.
Incident command system
Standardized management framework using command, operations, planning, logistics, and finance sections to coordinate emergency incidents and resources.
Transfer of command
Formal process in which the incoming incident commander receives a briefing on conditions, actions, resources, and safety before assuming command.
Needed fire flow
Iowa formula estimates required flow as length times width times number of floors, divided by three, in gallons per minute.
Type I construction
Fire-resistive construction with structural members protected from fire, usually providing the highest collapse resistance and longest fire resistance.
Type V construction
Wood-frame construction with combustible walls, floors, and roof; common in residential buildings and prone to rapid fire spread.
Wet-pipe sprinkler system
Automatic sprinkler system with water under pressure in the pipes; each head opens individually when its heat-sensitive element activates.
Dry-pipe sprinkler system
Automatic sprinkler system holding compressed air in the pipes; when a head opens, air escapes and water enters the system.
Deluge sprinkler system
System with open sprinkler heads; activation of the control valve discharges water simultaneously from all heads over the protected area.
Preaction sprinkler system
System using closed heads and a separate detection circuit; water fills the pipes only after detection and then a head opens.
Photoelectric smoke detector
Detector that responds to visible smoke particles by light scattering; it is generally more sensitive to smoldering fires.
Ionization smoke detector
Detector that responds to invisible combustion products using a small radioactive source; it is generally more responsive to flaming fires.
Aqueous film-forming foam
Class B foam that forms a thin aqueous film on hydrocarbon fuels, suppressing vapor and excluding oxygen from the fuel surface.
Positive pressure ventilation
Ventilation method using a blower to force fresh air into a structure while an opposite opening allows smoke and heat to exit.
Rapid intervention team
Standby crew of at least two firefighters with rescue tools, air supply, and search equipment, deployed specifically to rescue trapped firefighters.
Mayday LUNAR report
Distress radio report giving Location, Unit, Name, Assignment, and Resources or air status so rescuers can locate and assist the firefighter.

NFPA Firefighter I study guide

Fire Fighter I: Fire Behavior, PPE, Hose Hydraulics, and Fire Classes

Fire behavior

Fire Fighter I items range widely, but most cluster around a few core ideas: the fire tetrahedron (fuel, oxygen, heat, chemical chain reaction), how ventilation changes it, and how to read smoke. Know the difference between flashover - everything in the compartment ignites at once from radiant heat feedback - and backdraft - an oxygen-starved fire admits air and burns explosively. Flashover is heat-driven; backdraft is oxygen-driven. Question writers swap these definitions deliberately.

Standards and equipment

NFPA 1001 is the qualifications standard you are testing against; NFPA 1971 covers structural protective clothing; NFPA 1981 covers SCBA. Know SCBA limits: most units are rated 30 or 45 minutes, but that rating assumes a low work rate, so actual working time is much shorter.

Ladders and hose hydraulics

An extension ladder reaches higher than its bedded length suggests: a 24-ft ladder reaches the second floor. Set the tip even with or just above the sill and the butt about one-quarter of the working length from the wall.

Friction loss climbs with the square of the flow. Worked example: 200 ft of 1¾-in. hose flowing 150 gpm into a 100-psi nozzle. Q = 150/100 = 1.5. FL = C Q² L with C = 15.5 → 15.5 × 2.25 × 2 = 70 psi. Pump discharge = nozzle pressure + friction loss + appliance loss + elevation = 100 + 70 = 170 psi.

Fire classes and agents

A: ordinary combustibles (water); B: flammable liquids (foam, CO2); C: energized electrical (de-energize first); D: combustible metals (dry powder); K: cooking oils (wet chemical).

Fire Fighter II: Command, Accountability, Fire Flow, and Suppression Systems

Command and accountability

Fire Fighter II questions assume you can work inside a system, not just pull a line. Expect incident command content: a single command, span of control of three to seven (five is ideal), transfer of command through a face-to-face briefing, and a personnel accountability system that tracks every company on the fireground.

Two-in/two-out and RIT

Two members enter, two remain outside, and the outside pair must be able to don and perform rescue. A rapid intervention team is a separate requirement: at least two dedicated members, staged with tools, assigned nothing else. Traps: the outside pair may be given other duties only if they can drop them instantly; RIT members do not fight fire.

Fire flow and streams

The NFA formula estimates needed flow: NFF = (length × width) / 3, multiplied by the number of floors involved. Worked example: a 40-ft by 60-ft one-story building. 40 × 60 = 2,400; 2,400 / 3 = 800 gpm.

Suppression systems and foam

Wet pipe is the most common sprinkler system; dry pipe serves unheated spaces; deluge opens all heads at once; preaction requires detection plus a fused head. Close a sprinkler only after fire control and with IC approval, and replace the head with the same temperature rating. For Class B fires, AFFF is typically proportioned at 3% or 6%; polar solvents such as alcohol require alcohol-resistant foam. Apply gently - a fog stream can break the blanket.

After the fire

Cause determination begins during overhaul: preserve burn patterns, protect the area of origin, and avoid overhaul damage that destroys evidence.

NFPA Firefighter I cheat sheet

Quick reference

Fire Fighter I

  • Fire tetrahedron components are fuel, oxygen, heat, and chemical chain reaction; extinguishment removes at least one component.

  • Fire classes: A ordinary combustibles; B flammable/combustible liquids and gases; C energized electrical equipment; D combustible metals; K cooking oils and fats.

  • PASS extinguisher sequence: Pull the pin, Aim at the base, Squeeze the handle, Sweep side to side.

  • Ground ladder placement: base one foot from the building for every four feet of vertical height, about a 75-degree angle.

  • For roof access, extend a ground ladder three to five rungs above the roof edge.

  • One gallon of water converted to steam expands to roughly 1,700 gallons and absorbs substantial heat.

  • Primary search is rapid and systematic, covering the immediate fire area and common exit paths while staying below the thermal layer.

  • Vertical ventilation opens the highest point first and provides a lower inlet so hot gases and smoke escape upward.

  • Backdraft indicators include a confined fire, heavy smoke, little visible flame, and inward smoke movement; oxygen introduction can cause explosive ignition.

Quick reference

Fire Fighter II

  • Two-in/two-out rule: at least two firefighters enter an IDLH atmosphere together while two trained and equipped firefighters remain outside ready for rescue.

  • Incident command establishes a single IC, maintains accountability, and uses formal transfer-of-command briefings.

  • Needed fire flow (Iowa formula): length times width times number of floors, divided by three, in gallons per minute.

  • Type I construction is fire-resistive with protected structural members; Type V is wood-frame combustible construction.

  • Wet-pipe sprinkler systems hold water under pressure and each head opens individually when heated.

  • Dry-pipe sprinkler systems hold compressed air; when a head opens, air escapes and water enters the piping.

  • Photoelectric detectors respond to visible smoke from smoldering fires; ionization detectors respond to invisible products from flaming fires.

  • AFFF is a Class B foam for hydrocarbon fuels; it forms a film that suppresses vapor and excludes oxygen.

  • Positive pressure ventilation uses a blower at the inlet and an opposite exhaust opening to push smoke and heat out.

NFPA Firefighter I key terms

Fire Tetrahedron

Model showing the four components required for flaming combustion: fuel, oxygen, heat, and the self-sustaining chemical chain reaction. Removing any one of the four components stops the fire.

Related: Pyrolysis, Flashover
Pyrolysis

The chemical breakdown of a solid material caused by heat, which releases combustible gases and vapors before the material actually ignites. It explains why solid fuels burn as gases.

Related: Fire Tetrahedron, Autoignition Temperature
Autoignition Temperature

The lowest temperature at which a material will begin to burn on its own without a spark, flame, or other external ignition source, given sufficient time and oxygen.

Related: Pyrolysis, Flash Point
Flash Point

The lowest temperature at which a liquid releases enough vapor to form a flammable mixture with air near its surface, allowing a brief flash when an ignition source is applied.

Related: Lower Explosive Limit, Fire Tetrahedron
Lower Explosive Limit

The minimum concentration of a flammable vapor or gas in air, usually expressed as a percentage, that will ignite. Below this level the mixture is too lean to burn.

Related: Flash Point, IDLH
Flashover

A transition in a compartment fire in which heat feedback ignites all exposed combustible surfaces almost at once, causing full-room involvement and a sudden, steep rise in temperature.

Related: Rollover, Pyrolysis, Backdraft
Rollover

The ignition of hot, accumulated fire gases at ceiling level as they mix with air, producing flames that spread rapidly overhead ahead of the main body of fire.

Related: Flashover, Backdraft
Backdraft

A sudden explosion of fire gases that occurs when air is admitted to an overheated, oxygen-starved compartment, igniting the accumulated fuel-rich smoke and pushing fire outward.

Related: Flashover, Rollover
BLEVE

Boiling liquid expanding vapor explosion. A pressure vessel containing liquid fails from flame impingement, releasing vapor that ignites into a fireball with fragments thrown long distances.

IDLH

Immediately dangerous to life or health. An atmosphere that poses an immediate threat of severe exposure, death, or irreversible health effects, or that impairs a person's ability to escape.

Related: SCBA, Lower Explosive Limit
SCBA

Self-contained breathing apparatus. A portable backpack unit that supplies filtered compressed air from a cylinder through a regulator so the wearer can breathe safely in contaminated atmospheres.

Related: IDLH, PASS Device, Rapid Intervention Crew
PASS Device

Personal alert safety system. A motion-sensing alarm worn by firefighters that sounds a loud signal if the wearer stops moving for a set period, helping rescuers locate a downed member.

Related: SCBA, Mayday
Mayday

The radio term used to declare that a firefighter is lost, trapped, out of air, or otherwise in immediate life-threatening danger, which triggers emergency rescue procedures on the fireground.

Related: Rapid Intervention Crew, PASS Device
Rapid Intervention Crew

A team of at least two firefighters, staged with full equipment, whose only job is to rescue trapped or injured personnel. Required at structure fires under two-in/two-out rules.

Related: Mayday, Two-In/Two-Out Rule
Two-In/Two-Out Rule

An OSHA requirement that at least two firefighters remain outside a hazardous atmosphere, ready to rescue, whenever two enter, until a second crew arrives and a rescue capability exists.

Related: Rapid Intervention Crew, SCBA
Structural Firefighting Protective Clothing

The ensemble of coat, trousers, helmet, hood, gloves, and boots designed to shield firefighters from heat, flame, and water. It does not protect against every hazard by itself.

Related: NFPA 1971, SCBA
NFPA 1971

The National Fire Protection Association standard that sets minimum design, performance, and testing requirements for protective ensembles used in structural firefighting and proximity firefighting.

Related: Structural Firefighting Protective Clothing
Incident Command System

A standardized, modular management system that assigns clear roles, span of control, and communications so multiple agencies can work together safely and efficiently at an emergency scene.

Related: Size-Up, Mayday
Size-Up

The ongoing process of gathering and evaluating information about an incident, such as construction, occupancy, fire location, and resources, to form an action plan before and during operations.

Related: Incident Command System, Ventilation
Ventilation

The planned and systematic release of heat, smoke, and fire gases from a structure with replacement by fresher air, which improves visibility, tenability, and the effectiveness of fire attack.

Related: Vertical Ventilation, Flashover
Vertical Ventilation

Opening the roof or upper level directly above the fire so hot gases and smoke vent upward. It improves interior conditions but must be coordinated with fire attack.

Related: Ventilation, Flashover
Primary Search

A fast, systematic sweep of the fire area and likely occupied spaces, done early and often under poor visibility, to find and remove victims who are still alive.

Related: Ventilation, Size-Up
Overhaul

The stage after fire control in which crews open concealed spaces, remove smoldering debris, and check for hidden fire to prevent rekindle before leaving the scene.

Related: Salvage, Area of Origin
Salvage

Protecting property from water, smoke, and damage during and after a fire by covering contents, catching runoff, and moving valuables to a safe location.

Related: Overhaul
Friction Loss

The pressure lost as water moves through hose, pipes, and fittings because of turbulence and contact with the walls. It increases with flow rate, hose length, and smaller hose diameter.

Related: Pump Discharge Pressure, Drafting
Pump Discharge Pressure

The pressure the pump must produce so the nozzle receives the desired pressure after friction loss and elevation changes are taken into account by the operator.

Related: Friction Loss, Standpipe System
Ground Gradient

The voltage difference across the surface of the ground around an energized conductor, greatest near the contact point. Firefighters use a shuffle step or hop to avoid step potential.

Confined Space

A space large enough to enter, with limited entry or exit, and not designed for continuous occupancy. Many require permits, atmospheric testing, attendants, and retrieval systems before entry.

Related: IDLH, SCBA
Cribbing

Stacked wooden or composite blocks used to support, stabilize, and hold lifted objects such as vehicles or collapsed structures so rescuers can work safely beneath them.

Related: Vehicle Stabilization
Vehicle Stabilization

The process of preventing a vehicle from moving or shifting during extrication by chocking wheels, setting the parking brake, and placing cribbing or struts at key contact points.

Related: Cribbing
Area of Origin

The location inside a structure or vehicle where a fire began, identified through burn patterns, damage analysis, and witness information. It is the starting point of a cause determination.

Related: Incendiary Fire
Incendiary Fire

A fire that was intentionally set under circumstances in which the person knew it should not be ignited. It is one of the cause classifications used in fire investigation.

Related: Area of Origin
Class B Foam

A foam concentrate designed for flammable liquid fires. It forms a blanket over the fuel surface that smothers vapor, separates fuel from oxygen, and helps prevent reignition.

Related: Foam Proportioning
Foam Proportioning

The process of mixing foam concentrate with water at the correct percentage, such as 1, 3, or 6 percent, before the solution reaches the nozzle or the air-aspirating device.

Related: Class B Foam
Drafting

Drawing water from a static source such as a pond, pool, or portable tank by using a pump to create a partial vacuum, since the water source itself is not pressurized.

Related: Water Shuttle, Friction Loss
Water Shuttle

A tanker-based supply operation in which apparatus carry water from a fill site to a portable tank at the fire scene and then return for more, moving water where hydrants are unavailable.

Related: Drafting, Pump Discharge Pressure
Standpipe System

Piping built into a building that provides firefighters with a hose connection at each floor, letting them attach hose and obtain water without stretching lines from the street.

Related: Friction Loss, Pump Discharge Pressure

NFPA Firefighter I study plan

8 weeks · About 6 hours per week

Week 1

Fire Fighter I

  • Sketch and label the four stages of fire development and state at least two tactical indicators for each stage.

  • Classify the five common building construction types and list the collapse or failure warning signs associated with each.

  • Complete a timed donning and doffing drill of full structural PPE including SCBA, meeting the standard three times in a row.

  • Identify each SCBA component by name and explain two limitations of the unit during interior operations.

  • Match the four classes of fire to the extinguishing agents and extinguisher ratings that apply to each.

Your checkpoint

One-page fire-behavior and building-construction reference sheet plus a logged record of three timed PPE/SCBA drills.

Week 2

Fire Fighter I

  • Tie the bowline, figure-eight on a bight, clove hitch, and safety knot from memory with no reference card.

  • Raise, extend, and lower a ground ladder while calling the correct commands and hand signals.

  • Demonstrate one inward-swinging and one outward-swinging forcible entry technique and name the tool used for each.

  • Describe the steps to set up horizontal and vertical ventilation and state the conditions that make each unsafe.

  • Explain the load limits, placement rules, and grounding concerns for ladders used at a structure fire.

Your checkpoint

Checklist of 10 knots and ladder evolutions scored pass/fail, with all items passing before week 3.

Week 3

Fire Fighter I

  • Trace the path of water from a static source through pumper, hose, and nozzle and label each component on a diagram.

  • Compute required pump discharge pressure for three given hose layouts using friction loss and nozzle pressure values.

  • Identify the parts and operating features of a fog nozzle and a smooth-bore nozzle and state the flow characteristics of each.

  • Describe the correct hose loads, carries, and advances for a 1-3/4 inch attack line and a 2-1/2 inch line.

  • Explain the three fire stream patterns and the situation each is best suited for.

Your checkpoint

Worked solution set for five pump-pressure calculations, with at least four of five correct and errors corrected in writing.

Week 4

Fire Fighter I

  • Sequence the primary and secondary search techniques for a room-and-hall layout and state the search markers used.

  • Describe the coordination of fire attack, ventilation, and search on a single-family dwelling fire in the correct order.

  • List the overhaul steps that preserve evidence and the steps that protect the structure from further damage.

  • Identify the salvage covers, folds, and deployments used for contents protection in two room configurations.

  • Answer 40 mixed Domain 1 practice questions and log every missed item by topic.

Your checkpoint

Closed-book 100-question Domain 1 practice test scored at 80 percent or higher, with a written list of remaining weak topics.

Week 5

Fire Fighter II & Fire Fighter I

  • Draw the incident command structure for a working house fire and assign each function to a named role.

  • Explain the difference between the strategic, tactical, and task levels of the fireground and give one example of each.

  • Describe the radio procedures and clear-text terminology used for mayday, emergency traffic, and evacuation signals.

  • Re-drill the three weakest Domain 1 topics identified in your week 4 test until each is answered correctly twice in a row.

Your checkpoint

Hand-drawn ICS organization chart plus a written mayday and evacuation radio script rehearsed aloud.

Week 6

Fire Fighter II

  • Identify the components of a sprinkler system, standpipe system, and fire alarm system and state what each does at a fire.

  • Compare the five sprinkler types by activation characteristic and typical installation location.

  • Complete a pre-incident plan for a building you can actually walk, including access, water supply, and hazards.

  • Explain the firefighter's role in fire cause determination and list the observations that must be reported before overhaul.

Your checkpoint

A completed one-page pre-incident plan for a real local building, reviewed against a checklist of required elements.

Week 7

Fire Fighter II

  • Describe how to preserve, document, and hand off evidence at a fire scene without disturbing the area of origin.

  • Outline a fire-safety education message for a community group and match it to the audience's reading level.

  • Sequence the safe operations for a vehicle fire, including zone placement, PPE, and extinguishing approach.

  • Explain size-up factors for a commercial occupancy, including occupancy type, resources, and special hazards.

Your checkpoint

A 5-minute written fire-safety education outline plus a one-page evidence-preservation checklist ready for field use.

Week 8

Fire Fighter I & Fire Fighter II

  • Complete two full-length timed practice exams covering both domains and record the score for each attempt.

  • Review every missed question from weeks 4 through 8 and write a one-sentence rule for each recurring error.

  • Recite the key safety, accountability, and mayday procedures from memory without notes.

  • Confirm readiness on the three lowest-scoring topics until each reaches a repeatable correct answer.

Your checkpoint

Two scored full-length practice exams, both at or above 80 percent, with a corrected error log.

Milestones

Week 4: Domain 1 practice test closed-book at 80 percent or higher, with weak topics written down for week 5 review.

Week 6: ICS chart and pre-incident plan both completed and self-scored against a required-elements checklist with no missing items.

Week 8: Two full-length timed practice exams at or above 80 percent, with every repeated miss converted into a written rule.

NFPA Firefighter I exam day

Your checklist

Government-issued photo ID

Most providers require a valid driver's license, passport, or state ID at check-in. Name on the ID should match your registration exactly.

Admission/authorization paperwork

Bring your test authorization, confirmation email, or registration receipt plus any signed waivers or release forms the provider sent you. Confirm the exact document list with the provider before test day.

Complete structural firefighting PPE

Helmet, hood, turnout coat and pants, boots, and gloves that meet your program's requirements and fit you. Some providers supply PPE, some require you to bring your own - confirm with the provider and confirm whether your gear must be NFPA-compliant or department-issued.

SCBA with facepiece and charged cylinder

Confirm whether the test site supplies SCBA or you must bring your own, what cylinder pressure is required, and whether the harness must be fitted to you. Bring your own mask if the provider allows it, since fit affects seal checks.

Corrective lenses or mask insert

If your medical clearance or department policy requires vision correction, bring glasses or a facepiece spectacle insert. Do not wear contact lenses under a facepiece unless your provider permits it.

Medical clearance / physical documentation

Many programs require a current medical clearance or signed physical-fitness statement before you can participate. Verify what is on file and bring a copy if the provider asks.

Water, food, and sun/weather protection

Practical days are long and physically demanding. Bring more water than you think you need, plus a lunch and snacks. Dress for the weather between evolutions - the site may be outdoors or unheated.

Pen or pencil and a small notepad

Useful for writing down station assignments, retest times, and evaluator feedback. Confirm whether any written materials are allowed in the testing area.

Change of clothes and a towel

You will likely be wet and dirty. Dry clothes for the ride home matter more than most candidates expect.

Personal medications and any allowed support items

Bring prescriptions you may need (for example, an inhaler if medically cleared and permitted). Tell the provider in advance about any medical condition or accommodation need.

Your program's skill sheets / JPR list

Study from the performance requirements your course uses for each skill. Confirm which edition of the standard and which skill list your provider tests against so you practice the right criteria.

Directions, arrival time, and parking/gate details

Confirm the check-in time, the exact building or gate, and whether you need an escort or badge. Plan to arrive well before your report time.

Plan the day

72 hours before

Confirm your test date, report time, location, and what the provider supplies versus what you must bring. Get the pass/fail criteria and the retest policy in writing if possible.

72 hours before

Read the skill sheets for every station on your list. Highlight the critical steps that cause automatic failure at each station - those are what evaluators watch closest.

72 hours before

Do at least one full dress rehearsal in complete PPE, including a timed SCBA donning and a mask seal check. Fix gear that does not fit or fastens poorly now, not on test day.

72 hours before

Protect your body: hydrate, sleep on schedule, and avoid heavy or unfamiliar workouts that could leave you sore or injured. Do not start any new physical training this close to the test.

24 hours before

Pack your bag from the checklist and stage PPE by the door. Verify cylinder pressure, that all PPE components are present and serviceable, and that nothing is torn or missing.

24 hours before

Review critical-failure criteria and practice verbalizing your actions out loud. Many stations score what you say as well as what you do.

24 hours before

Confirm your travel plan, alarm, and a backup ride. Eat a normal dinner, avoid alcohol, and go to bed early.

Morning of

Eat a real breakfast and start hydrating. Arrive early - aim well ahead of your report time to absorb check-in, parking, and staging delays.

Morning of

Check in, present your ID and paperwork, and get your station assignment or rotation order. Lay out your PPE and SCBA so you can don them without searching.

Morning of

Warm up lightly - mobility and a short walk - and do a final gear check: helmet, hood, coat closure, pants, boots, gloves, and regulator.

During the test

Listen to the full instructions before touching equipment. If a direction is unclear, ask one clarifying question before the clock starts; asking is not penalized, guessing usually is.

During the test

Work at a controlled pace, verbalize key actions and safety checks, and self-monitor - evaluators generally must stop a candidate for unsafe acts, so slow down at the points where safety matters most.

During the test

Between stations, reset your gear, take water, and review the next skill sheet briefly. Do not discuss or 'coach' other candidates about station content.

After the test

Get your results and, if you did not pass a station, ask the provider about the retest window, fees, and what documentation you need. Record your scores before you leave.

Rules to check

  • Bring and present a valid photo ID at check-in; without acceptable identification you may be turned away. Confirm the accepted ID forms with the provider.

  • Follow all safety direction from evaluators immediately. Unsafe acts, or failing to wear required PPE properly, can end your participation in a station or the entire test - confirm the provider's specific safety-stop policy.

  • No coaching, prompting, or assistance from spectators, classmates, or instructors once you are at a station. Testing areas are usually restricted to candidates and evaluators; confirm whether observers are permitted at all.

  • Phones and recording devices are typically prohibited or restricted in testing areas. Confirm the provider's device policy and secure your phone before you report.

  • Scoring is generally pass/fail per station against published performance criteria, with certain steps treated as automatic failures. Get the exact criteria and critical-failure list from your provider rather than relying on what other candidates tell you.

  • Know the retest policy before you start: how many stations you may retest, the time window, the fee, and any required remediation. Policies vary by provider and jurisdiction - confirm with the provider.

  • Breaks, lunch, and restroom procedures are set by the test site. Ask at check-in when breaks occur and whether you may leave the staging area; do not leave without notifying an evaluator.

  • Be professional with evaluators and other candidates. If you believe a scoring error occurred, finish the evolution, then raise it through the provider's stated appeal or review process - arguing at the station generally works against you.

NFPA Firefighter I FAQ

How many NFPA Firefighter I practice questions are available?

The practice set has 199 NFPA Firefighter I questions. Each one includes the choices, the correct answer, and an explanation, and the set is free to read with no signup.

How many NFPA Firefighter I flashcards are available?

The flashcard set has 32 NFPA Firefighter I cards. Each card shows the term and its definition.

Which topics does the NFPA Firefighter I study material cover?

The NFPA Firefighter I study material covers Fire Fighter I: Fire Behavior, PPE, Hose Hydraulics, and Fire Classes and Fire Fighter II: Command, Accountability, Fire Flow, and Suppression Systems.