CQI IRCA QMS LA Practice Test

CQI IRCA QMS Lead Auditor (ISO 9001)

CQI IRCA QMS LA overview

  • 200 practice questions
  • 32 flashcards
  • 8 study guide topics
  • 40 key terms

What you'll study

  • Quality management fundamentals and ISO 9001 requirements20%
  • Audit principles, audit types and the audit programme (ISO 19011)10%
  • Auditor competence, personal attributes and ethical conduct8%
  • Audit planning and preparation (documentation review, audit plan, working documents)15%
  • Conducting the audit: opening meeting, interviewing, sampling and evidence gathering17%
  • Identifying findings, grading nonconformities and evaluating objective evidence12%
  • Audit reporting, closing meeting, follow-up and corrective action verification10%
  • Third-party certification, accreditation oversight and the role of the lead auditor8%

The CQI IRCA QMS Lead Auditor qualification is the recognised credential for auditors who lead quality management system audits against ISO 9001, whether for a certification body, a registrar's subcontractor, or an organisation's internal audit programme. It confirms that a candidate can plan an audit, gather and weigh objective evidence, grade nonconformities defensibly, run an opening and closing meeting, and report so that corrective action is possible. Most candidates come from quality, engineering or operations roles, and many already hold internal auditor or second-party audit experience. The assessment is competence-based rather than purely knowledge-based: a written examination tests ISO 9001 requirements, ISO 19011 guidance and audit judgement, while the course provider also assesses practical audit skills through simulated audits, interviews and continual evaluation across the course. Preparation therefore means knowing the standard's clauses well enough to audit against them, not reciting them. Read ISO 9001 and ISO 19011 directly, practise writing clear nonconformity statements with evidence and clause references, and rehearse the audit lifecycle in sequence, from programme planning to follow-up. Question counts, timings, pass marks and fees are set by the awarding and certification bodies and change periodically; check the current CQI IRCA documentation and your training provider for the figures that apply to your booking.

Common mistakes

Writing a nonconformity as a bare conclusion - e.g. 'Document control is not effective' or 'The procedure was not followed' - with no document ID, date, sample, record reference or quoted requirement.

Candidates think in conclusions and want the finding to sound authoritative; under time pressure they write the summary they would say verbally instead of the evidence chain.

What to do instead

Use a fixed three-part structure for every nonconformity: (1) the requirement - quote the 'shall' from ISO 9001 or the organisation's own document with its ID and clause; (2) the objective evidence - record/document ID, revision, date, sample size, what was actually seen; (3) the failure - one sentence stating how the evidence fails the requirement. Read it back and ask: could an auditee who disagrees challenge any word? If yes, add evidence.

Embedding the correction or corrective action inside the nonconformity - writing 'the calibration label was missing and the lab should re-label all equipment and retrain staff'.

Candidates want to be helpful and fear the finding looks incomplete without a solution; it also feels faster than separating the two clauses.

What to do instead

Write the nonconformity only as requirement-versus-evidence. Put any action in a clearly separate 'correction/corrective action proposed by auditee' field, or leave it for the auditee to complete. In third-party audits, never propose the action at all - that is consultancy and a breach of impartiality.

Grading inconsistently: raising a major for a single missing signature in one file, then raising a minor for a whole process with no evidence of monitoring across three departments.

No explicit grading criteria are held in mind, so severity drifts with the auditee's reaction, the auditor's fatigue, or how early in the audit the issue appears.

What to do instead

Apply a stated test before assigning severity: major = a required element of the QMS is absent, entirely not implemented, or a systemic breakdown that would likely prevent the QMS from assuring conforming product; minor = an isolated lapse in an otherwise implemented and effective control. Check whether the same issue recurs elsewhere (sample across areas) before calling it major or minor, and record the rationale in one line next to the grading.

Auditing clause by clause against a checklist of ISO 9001 requirements, or reading procedures at a desk instead of walking the process, so the report never addresses process interaction, process performance or process interfaces.

The standard's numbering is easy to follow and feels like a safe, complete coverage plan; candidates worry about missing a clause and default to clause coverage over process coverage.

What to do instead

Build the audit plan around processes and their sequence and interaction. For each process, trace a real product or service from input to output, sampling records at each step, and test the process against the relevant clauses rather than testing clauses against the process. Use a process (turtle) diagram to prompt inputs, outputs, resources, controls, performance indicators and interfaces.

Asking leading or closed questions ('You do calibrate all gauges, don't you?') and recording the auditee's verbal assurance as evidence without corroborating records or observing the activity.

Candidates want confirmation of what they already expect, are nervous about silence, and verbal answers are faster than sampling evidence.

What to do instead

Use open questions ('Walk me through what happens when an instrument is found out of calibration'), then follow with 'show me' - ask for the last three instances and inspect the records. Record the evidence source, not the assertion. If an auditee says 'we always do that', ask for the last time it happened and verify it.

Verifying corrective action by checking that a corrective action form was completed and signed, without testing the root cause analysis or whether the problem has actually recurred.

The evidence of activity (form, signature, revised procedure) is easy to find and looks like closure; testing effectiveness takes extra sampling time the candidate has not planned.

What to do instead

Verify three things separately and record each: the root cause is credible and addresses the cause rather than the symptom; the action was implemented (evidence of implementation, not just a plan); and it is effective (sample post-implementation records, trend data or audit results showing no recurrence). If effectiveness cannot yet be judged, record it as not verified rather than closed.

Over-running the first process or department, then rushing or skipping remaining planned areas; sampling only the first available records (for example, only this month's file) and not recording what was sampled.

The first area yields plenty of findings and feels productive, so time control slips; sampling feels arbitrary and the candidate lacks a defensible sampling rationale.

What to do instead

Allocate plan time by risk and process size, and keep a running time check against the plan. Use a stated sampling basis (e.g. all records from a period plus all exceptions, or a random spread across shifts/sites), and log the sample - what, how many, which period - in the working documents. If time runs out, record the planned area as not audited rather than implying coverage.

Citing the wrong ISO 9001 clause or a general clause for a specific failure - for example citing 8.5.1 for a missing incoming inspection record, or 7.5 for an unavailable work instruction that is really a control-of-production issue - or citing a clause that contains no requirement the evidence breaches.

Clause numbers are memorised as a list rather than as requirements with specific intent, so candidates match the topic word rather than the actual requirement that failed.

What to do instead

Before writing the clause, read the requirement text and check that the evidence breaches that specific 'shall'. Ask: what did the organisation fail to do, and which requirement demands it? Cite the most specific applicable clause, and where ownership of a control is genuinely shared, cite the primary requirement and note the secondary one in the detail rather than listing several clauses to cover uncertainty.

Drifting into consultancy - suggesting solutions ('you should introduce a kanban board', 'I'd recommend weekly toolbox talks') in the closing meeting or report, or accepting hospitality/gifts and continuing to audit, or auditing an area the auditor previously managed.

The auditee asks 'so what do you suggest?' and the candidate wants to appear expert and helpful; conflicts of interest are not always obvious until they arise.

What to do instead

State the finding and stop: describe what is wrong and against which requirement, and let the auditee design the action. Where a solution is proposed by the auditee, test it against the requirement rather than improving it. Declare any prior employment, consultancy or personal relationship before the audit, decline gifts and hospitality, and record the declaration.

Confusing audit types and their purpose - running a certification audit exactly like an internal audit with no Stage 1/Stage 2 distinction, not confirming scope, criteria and objectives at the opening meeting, and treating the audit criteria as the organisation's documents alone.

Candidates prepare for one generic 'audit' and do not differentiate internal, second-party and third-party audits, or the readiness/effectiveness split between Stage 1 and Stage 2.

What to do instead

Before planning, state explicitly: audit type, objective, scope (boundaries, sites, exclusions), criteria (ISO 9001 plus the organisation's own documents plus applicable statutory/regulatory requirements) and the stage. For certification, use Stage 1 to confirm readiness - documented system, scope, internal audit and management review completed, resources - and reserve Stage 2 for evidence of implementation and effectiveness. Open the audit by confirming these five items with the auditee and record agreement.

Exam requirements can change. Confirm current details with the exam provider.

CQI IRCA QMS LA practice

200 questions. Each one lists the choices, the correct answer, and an explanation. With JavaScript, this list opens one question at a time. The checker at the top of this page saves progress in this browser when it is available.

  1. Question 1Quality management fundamentals and ISO 9001 requirements

    ISO 9001:2015 requires an organization to determine the external and internal issues that are relevant to its purpose and strategic direction and that affect its ability to achieve the intended results of the quality management system. Which clause contains this requirement?

    1. 5.1 Leadership and commitment
    2. 4.2 Understanding the needs and expectations of interested parties
    3. 6.2 Quality objectives and planning
    4. 4.1 Understanding the organization and its context Correct answer.

    Explanation

    Clause 4.1 requires the organization to determine external and internal issues relevant to its purpose and strategic direction. Clause 4.2 deals with interested parties, clause 5 with leadership and clause 6.2 with quality objectives.

  2. Question 2Quality management fundamentals and ISO 9001 requirements

    ISO 9001:2015 does not prescribe a formal risk management process, but it does require the organization to do which of the following?

    1. Appoint a risk manager who reports directly to the certification body on a monthly basis
    2. Quantify all risks using a recognized scoring method and record the scores in the quality manual
    3. Plan actions to address risks and opportunities and evaluate their effectiveness Correct answer.
    4. Maintain a documented risk register that covers every process and is reviewed by top management each quarter

    Explanation

    Clause 6.1 requires the organization to determine risks and opportunities, plan actions to address them, integrate the actions into QMS processes and evaluate their effectiveness. The standard deliberately leaves the method and any documentation to the organization.

  3. Question 3Quality management fundamentals and ISO 9001 requirements

    In ISO 9001:2015, the term 'documented information' refers to which of the following?

    1. Electronic files exclusively, since paper documents are no longer recognized by the standard
    2. Information to be controlled and maintained, and the medium holding it Correct answer.
    3. Only the records that are generated during product realization and after delivery
    4. Only documents that bear a revision number, an approval signature and a controlled distribution list

    Explanation

    Documented information is information required to be controlled and maintained by the organization and the medium on which it is contained. It covers both documents and records, in any format or medium, so neither paper nor electronic media are excluded.

  4. Question 4Quality management fundamentals and ISO 9001 requirements

    Which statement correctly distinguishes design and development verification from validation in ISO 9001:2015?

    1. Verification is carried out by the customer, whereas validation is carried out by the organization before delivery
    2. Verification is a laboratory activity, whereas validation is a documented management review of the design
    3. Verification and validation are two names for the same activity, and either one satisfies the clause
    4. Verification confirms outputs meet inputs; validation confirms fitness for intended use Correct answer.

    Explanation

    Verification confirms that design and development outputs meet the input requirements, while validation confirms that the resulting product or service meets the requirements for its intended use or application. They are separate activities and both must be planned and their results retained.

  5. Question 5Quality management fundamentals and ISO 9001 requirements

    Which of the following is one of the seven quality management principles on which ISO 9001:2015 is based?

    1. Statistical process control
    2. Supplier price reduction
    3. Engagement of people Correct answer.
    4. Zero defect production

    Explanation

    The seven principles are customer focus, leadership, engagement of people, process approach, improvement, evidence-based decision making and relationship management. Zero defect targets, statistical techniques and price reduction are not principles of the standard.

  6. Question 6Quality management fundamentals and ISO 9001 requirements

    Which statement best describes the process approach required by ISO 9001:2015?

    1. It requires every process to be documented in a written procedure before the process is first performed
    2. It means managing activities as interrelated processes to achieve planned results Correct answer.
    3. It requires the organization to outsource any process whose output cannot be measured
    4. It applies only to manufacturing processes that have clearly measurable outputs and defined tolerances

    Explanation

    The process approach means understanding and managing interrelated processes as a system in order to achieve consistent and predictable results. ISO 9001:2015 does not require documented procedures for every process, and it applies to all types and sizes of organization, including service providers.

  7. Question 7Quality management fundamentals and ISO 9001 requirements

    ISO 9001:2015 requires the organization to monitor customers' perceptions of the degree to which their needs and expectations have been fulfilled. What does the standard say about how this should be done?

    1. It prescribes a written customer survey as the only acceptable method of collecting the data
    2. It requires a target of 100 % customer satisfaction to be set and reported annually
    3. It leaves the methods for obtaining and using this information to the organization Correct answer.
    4. It requires satisfaction data to be reported only to the certification body at each audit

    Explanation

    Clause 9.1.2 requires the monitoring of customer perceptions but deliberately leaves the methods to the organization, which may use surveys, feedback, complaints analysis or market data. No method, target or external reporting channel is prescribed.

  8. Question 8Quality management fundamentals and ISO 9001 requirements

    Under ISO 9001:2015, internal audits must be conducted at which frequency?

    1. At planned intervals Correct answer.
    2. Only when a nonconformity is found by a customer
    3. At least once every twelve months
    4. Whenever the certification body requests it

    Explanation

    Clause 9.2 requires internal audits at planned intervals, with the frequency set by the organization taking into account the importance of processes, changes affecting the organization and the results of previous audits. A fixed annual cycle is not mandated.

  9. Question 9Quality management fundamentals and ISO 9001 requirements

    Which of the following is an input that ISO 9001:2015 specifically requires to be considered in management review?

    1. The status of actions from previous management reviews Correct answer.
    2. The number of employees holding engineering degrees
    3. The results of competitor benchmarking studies
    4. The organization's sales forecast for the next period

    Explanation

    Clause 9.3.2 lists the status of actions from previous management reviews as a required input, together with audit results, customer feedback, process performance, nonconformities, monitoring results, external provider performance and resource adequacy.

  10. Question 10Quality management fundamentals and ISO 9001 requirements

    Clause 8.5.6 on control of changes requires the organization to review and control changes to production and service provision to the extent necessary to ensure continuing conformity with requirements. What else does it require?

    1. That all changes are approved in writing by the customer before they are implemented
    2. That every change is recorded in the quality manual and approved by top management
    3. That the review results, authorizing persons and required actions are recorded Correct answer.
    4. That every change is validated by an external laboratory before implementation

    Explanation

    Clause 8.5.6 requires retention of documented information describing the results of the review of changes, the person(s) authorizing the change and any necessary actions. Customer approval or external validation is needed only where separately required by contract or regulation.

  11. Question 11Quality management fundamentals and ISO 9001 requirements

    When a nonconformity occurs, what is the first thing ISO 9001:2015 requires the organization to do?

    1. Issue a new revision of the quality manual and inform all process owners
    2. React to it, control and correct it, and deal with the consequences Correct answer.
    3. Retrain every employee in the affected department before work resumes
    4. Notify the certification body in writing within 24 hours of its detection

    Explanation

    Clause 10.2.1 requires the organization to react to the nonconformity and, as applicable, take action to control and correct it and deal with the consequences, before evaluating the need to eliminate the cause. Informing the certification body is not a general requirement.

  12. Question 12Quality management fundamentals and ISO 9001 requirements

    Which of the following does ISO 9001:2015 require in relation to competence?

    1. A documented training plan must exist for each individual employee
    2. Every person doing work under the organization's control must hold a formal qualification recognized by a national body
    3. Necessary competence must be determined and evidence of it retained Correct answer.
    4. Competence must be verified each year by an external training provider

    Explanation

    Clause 7.2 requires the organization to determine the necessary competence of persons doing work under its control, ensure they are competent and retain appropriate documented information as evidence of competence. It does not prescribe how competence is obtained or verified.

  13. Question 13Quality management fundamentals and ISO 9001 requirements

    When determining the scope of its quality management system, what must an organization take into account under ISO 9001:2015?

    1. The external and internal issues and the relevant interested parties' requirements Correct answer.
    2. Only the requirements of its largest customer and the contracts it has signed with them
    3. Only the processes it chooses to outsource to external providers and their locations
    4. Only the statutory and regulatory requirements of the country in which it manufactures

    Explanation

    Clause 4.3 requires the scope to take into account the issues identified under 4.1 and the requirements of relevant interested parties identified under 4.2, together with the organization's products and services. The scope must be maintained as documented information.

  14. Question 14Quality management fundamentals and ISO 9001 requirements

    ISO 9001:2015 requires the organization to determine the knowledge necessary for the operation of its processes and to do what with it?

    1. Patent it before it can be used in any production or service process
    2. Restrict access to it to members of top management and their assistants
    3. Publish it in a publicly accessible database maintained by the organization
    4. Maintain it and make it available as needed Correct answer.

    Explanation

    Clause 7.1.6 requires the organization to determine the knowledge necessary for the operation of its processes and to achieve conformity of products and services, then maintain it and make it available to the extent necessary.

  15. Question 15Quality management fundamentals and ISO 9001 requirements

    A company buys a machined component from an external provider, incorporates it into an assembly and sells the assembly to its customer. Under ISO 9001:2015, who is responsible for ensuring the component conforms to requirements?

    1. The organization Correct answer.
    2. The external provider alone
    3. The certification body
    4. The customer

    Explanation

    Clause 8.4.1 makes the organization responsible for ensuring that externally provided processes, products and services conform to requirements. Outsourcing transfers activity to a provider but not the organization's responsibility for conformity.

  16. Question 16Quality management fundamentals and ISO 9001 requirements

    Which of the following is required by ISO 9001:2015 in relation to external providers?

    1. Selection and re-evaluation criteria must be applied and the results retained Correct answer.
    2. External providers must be audited on site by the organization at least once every twelve months
    3. A documented supplier scorecard containing at least five performance indicators must be maintained for each provider
    4. Every external provider must hold a third-party certified quality management system before the first order is placed

    Explanation

    Clause 8.4.1 requires the organization to determine and apply criteria for the evaluation, selection, monitoring of performance and re-evaluation of external providers, and to retain documented information of these activities and of any necessary actions. The specific controls chosen are left to the organization.

  17. Question 17Quality management fundamentals and ISO 9001 requirements

    ISO 9001:2015 requires the organization to analyse and evaluate appropriate data and information arising from monitoring and measurement. What is this analysis used for?

    1. Evaluating product conformity, customer satisfaction and supplier performance Correct answer.
    2. Setting the selling price of each product and service offered to customers
    3. Ranking employees for the annual bonus scheme and for promotion decisions
    4. Determining the market share of each product line and of each sales region

    Explanation

    Clause 9.1.3 requires analysis and evaluation of data to assess conformity of products and services, customer satisfaction, the performance and effectiveness of the QMS, the effectiveness of planning, risks and opportunities, and the performance of external providers.

  18. Question 18Quality management fundamentals and ISO 9001 requirements

    Quality objectives established under ISO 9001:2015 must be which of the following?

    1. Confidential and restricted to the management review meeting
    2. Identical for every process and reviewed once each year
    3. Approved in advance by the customer or the certification body
    4. Measurable and consistent with the quality policy Correct answer.

    Explanation

    Clause 6.2.1 requires quality objectives to be consistent with the quality policy, measurable, monitored, communicated, updated as appropriate, and relevant to conformity of products and services and to the enhancement of customer satisfaction.

  19. Question 19Quality management fundamentals and ISO 9001 requirements

    When an output does not conform to requirements, what does ISO 9001:2015 require the organization to do?

    1. Scrap the output regardless of whether the nonconformity can be corrected
    2. Deliver it whenever the measured deviation is below a 5 % threshold
    3. Obtain a written concession from the certification body before releasing it
    4. Take action to correct it and keep documented information describing it Correct answer.

    Explanation

    Clause 8.7 requires appropriate action based on the nature of the nonconformity and its effect on conformity, and retention of documented information describing the nonconformity, the actions taken, any concessions obtained and the authority deciding the action.

  20. Question 20Quality management fundamentals and ISO 9001 requirements

    Under ISO 9001:2015, when measurement traceability is a requirement or is considered by the organization to be essential, measuring equipment must be which of the following?

    1. Calibrated only by the original equipment manufacturer or its agent
    2. Calibrated against standards traceable to national or international standards Correct answer.
    3. Replaced at fixed intervals regardless of its condition and its record of use
    4. Verified by the user before each use with no reference standard

    Explanation

    Clause 7.1.5.2 requires measuring equipment to be calibrated or verified, or both, at specified intervals or prior to use, against measurement standards traceable to international or national standards. Where no such standards exist, the basis used for calibration must be retained as documented information.

  21. Question 21Quality management fundamentals and ISO 9001 requirements

    ISO 9001:2015 requires the organization to review its ability to meet the requirements for products and services before committing to supply. What must be retained as a result of this review?

    1. Signed minutes of every meeting held with the customer during contract negotiation
    2. A detailed cost breakdown for each order that is accepted
    3. The customer's internal quality manual and its process maps
    4. Documented information of the review results and any new requirements Correct answer.

    Explanation

    Clause 8.2.3 requires the review to be conducted before commitment to supply and documented information to be retained on the results of the review and on any new or changed requirements for the products and services.

  22. Question 22Quality management fundamentals and ISO 9001 requirements

    Continual improvement under ISO 9001:2015 requires the organization to do which of the following?

    1. Hold a monthly improvement meeting with all process owners
    2. Improve the characteristics of its products and services only
    3. Improve the suitability, adequacy and effectiveness of the QMS Correct answer.
    4. Apply corrective action whenever a nonconformity is identified by an auditor

    Explanation

    Clause 10.3 requires the organization to continually improve the suitability, adequacy and effectiveness of the quality management system, taking into account the results of analysis and evaluation and the outputs of management review.

  23. Question 23Quality management fundamentals and ISO 9001 requirements

    ISO 9001:2015 requires persons doing work under the organization's control to be aware of which of the following?

    1. The names and audit histories of all external providers currently in use
    2. The organization's financial results and its annual sales targets
    3. The quality policy and their own contribution to the effectiveness of the QMS Correct answer.
    4. The personal objectives of the chief executive officer and the board

    Explanation

    Clause 7.3 requires awareness of the quality policy, relevant quality objectives, each person's contribution to the effectiveness of the QMS including the benefits of improved performance, and the implications of not conforming with QMS requirements.

  24. Question 24Quality management fundamentals and ISO 9001 requirements

    A process output cannot be verified by subsequent monitoring or measurement. What does ISO 9001:2015 require the organization to do in this situation?

    1. Validate and periodically revalidate the process to achieve planned results Correct answer.
    2. Obtain written customer approval for every batch that is produced
    3. Increase the frequency of final inspection to compensate for the risk
    4. Outsource the process to an external provider that holds a certified QMS

    Explanation

    Clause 8.5.1 f) requires validation and periodic revalidation of the ability to achieve planned results for processes where the resulting output cannot be verified by subsequent monitoring or measurement. Additional inspection cannot compensate, because the characteristic cannot be measured later.

  25. Question 25Quality management fundamentals and ISO 9001 requirements

    The outputs of management review under ISO 9001:2015 must include decisions and actions related to which of the following?

    1. Feedback from customers and other relevant interested parties
    2. The results of internal audits and the status of corrective actions
    3. The extent to which quality objectives have been met
    4. Opportunities for improvement and any need for QMS changes Correct answer.

    Explanation

    Clause 9.3.3 requires the outputs of management review to include decisions and actions related to opportunities for improvement and any need for changes to the quality management system. The other items listed are required inputs under clause 9.3.2.

  26. Question 26Quality management fundamentals and ISO 9001 requirements

    ISO 9001:2015 is built on a set of quality management principles. Which of the following is one of those principles?

    1. Supplier dominance
    2. Regulatory compliance
    3. Cost optimisation
    4. Engagement of people Correct answer.

    Explanation

    The standard's requirements are founded on quality management principles including customer focus, leadership, engagement of people, process approach, improvement, evidence-based decision making and relationship management. Engagement of people is one of these principles; the other listed items are management goals or obligations rather than principles.

  27. Question 27Quality management fundamentals and ISO 9001 requirements

    What does ISO 9001:2015 require in relation to the quality policy?

    1. It must be kept confidential to top management only
    2. It must be reviewed and approved by an external certification body before it is released
    3. It must be available to relevant interested parties, as appropriate Correct answer.
    4. It must be displayed at every workstation in the organization

    Explanation

    The quality policy must be maintained as documented information, communicated within the organization and made available to relevant interested parties as appropriate. Internal communication and external availability are both specified; external approval is not.

  28. Question 28Quality management fundamentals and ISO 9001 requirements

    Clause 7.1.3 requires the organization to determine, provide and maintain the infrastructure necessary for the operation of its processes. Which of the following is an example of infrastructure?

    1. The measurement traceability of test equipment
    2. The competence of machine operators
    3. Transport and communication resources Correct answer.
    4. The temperature of the storage area

    Explanation

    Infrastructure covers buildings, associated utilities, equipment including hardware and software, transportation resources, and information and communication technology. Competence, ambient conditions and measurement traceability are addressed by other clauses.

  29. Question 29Quality management fundamentals and ISO 9001 requirements

    Clause 7.4 requires the organization to determine the internal and external communications relevant to the quality management system. Which of the following must be determined?

    1. Only the communication channels used by top management
    2. The languages in which documents must be written
    3. Only the content of communications with customers
    4. What, when, with whom, how and who communicates Correct answer.

    Explanation

    Clause 7.4 specifies that the organization determines what it will communicate, when, with whom, how and who communicates. The scope is all relevant internal and external communications, not only customer or top-management communications.

  30. Question 30Quality management fundamentals and ISO 9001 requirements

    An organization is deciding which interested parties to monitor and review for its quality management system. According to ISO 9001:2015, what makes an interested party relevant?

    1. Whether they are named in the organization's quality manual or in the scope statement of the QMS
    2. Whether they have a signed contract with the organization
    3. Whether they can affect the organization's ability to provide conforming outputs Correct answer.
    4. Whether they are regulators with statutory authority over the organization's activities

    Explanation

    Clause 4.2 requires the organization to determine the interested parties that are relevant to the quality management system and the requirements of those parties that are relevant. Relevance is judged by the party's potential effect on the organization's ability to consistently provide conforming products and services and on customer satisfaction.

  31. Question 31Quality management fundamentals and ISO 9001 requirements

    When planning its quality management system, the organization must address risks and opportunities. What is the purpose of doing so?

    1. To give assurance that the QMS can achieve its intended results Correct answer.
    2. To satisfy only the specific risk requirements imposed by the organization's customers
    3. To replace the need for corrective action whenever a nonconformity is detected in a process
    4. To eliminate the need to maintain a documented risk register and a risk owner for each process

    Explanation

    Clause 6.1 requires the organization to address risks and opportunities in order to give assurance that the QMS can achieve its intended results, enhance desirable effects, prevent or reduce undesired effects, and achieve improvement. It is a planning obligation, and the standard prescribes neither a risk register nor a prescribed method.

  32. Question 32Quality management fundamentals and ISO 9001 requirements

    Clause 6.3 addresses the planning of changes to the quality management system. What must the organization consider when carrying out such changes?

    1. Whether the proposed change has been reviewed and endorsed by the organization's certification body before implementation
    2. The purpose of the change, its consequences and the integrity of the QMS Correct answer.
    3. Whether the change reduces the number of documented procedures and work instructions in the QMS
    4. Only the cost of implementing the change and whether the budget for it has been approved by top management

    Explanation

    Changes must be carried out in a planned manner, considering the purpose of the change and its potential consequences, the integrity of the quality management system, the availability of resources, and the allocation or reallocation of responsibilities and authorities. Cost and auditor endorsement are not the criteria in the clause.

  33. Question 33Quality management fundamentals and ISO 9001 requirements

    Clause 7.5.3 requires the organization to control documented information. Which activity does that control include?

    1. Translating all documented information into every language used by the workforce
    2. Approving every document at each level of the organization before use
    3. Retaining all obsolete documents indefinitely so that past decisions can be traced
    4. Preventing the unintended use of obsolete documented information Correct answer.

    Explanation

    Control of documented information includes ensuring it is available and suitable for use where and when needed, and protecting it from loss of integrity, improper access and unintended alteration. Obsolete information retained for any purpose must be prevented from unintended use.

  34. Question 34Quality management fundamentals and ISO 9001 requirements

    Clause 8.5.2 requires the organization to use suitable means to identify outputs. When is documented information enabling traceability required?

    1. Whenever the product is intended for export
    2. Whenever the organization employs more than ten people
    3. Where traceability is a requirement Correct answer.
    4. Whenever a nonconformity has been identified in a previous audit

    Explanation

    Under clause 8.5.2 the organization must retain documented information necessary to enable traceability when traceability is a requirement. That requirement may arise from customers, statutory or regulatory obligations, or the organization's own decision.

  35. Question 35Quality management fundamentals and ISO 9001 requirements

    A food manufacturer holds ingredients in store before production. Which of the following is the best example of preservation under clause 8.5.4?

    1. Training operators in the correct mixing time and recording their competence
    2. Using temperature-controlled storage and protective packaging until delivery Correct answer.
    3. Calibrating the weighing scale used in the mixing process at defined intervals
    4. Recording the batch number of each ingredient on the process sheet and in the product record

    Explanation

    Preservation requires the organization to preserve the outputs during production and service provision to the extent necessary to maintain conformity, and includes identification, handling, contamination control, packaging, storage, transmission or transportation and protection. Temperature-controlled storage and protective packaging are preservation activities.

  36. Question 36Quality management fundamentals and ISO 9001 requirements

    Clause 8.6 requires documented information on the release of products and services. What must that documented information include?

    1. The names of all external providers involved and the dates on which they were approved
    2. The cost of the verification activities performed and the time taken to complete them at each stage
    3. A copy of the customer's purchase order together with the signed delivery note
    4. Evidence of conformity with acceptance criteria and traceability to the authorising person Correct answer.

    Explanation

    The documented information on release must include evidence of conformity with acceptance criteria and traceability to the person or persons authorising the release. Planned verification arrangements must be satisfactorily completed before release unless approved by a relevant authority and, where applicable, by the customer.

  37. Question 37Quality management fundamentals and ISO 9001 requirements

    A tooling company uses a mould supplied by its customer and accidentally damages it during production. What does ISO 9001:2015 require of the organization?

    1. Record the damage in the internal audit report and discuss it at the next management review
    2. Report the damage to the customer and retain documented information about it Correct answer.
    3. Nothing, because the mould remains the property of the customer and is not covered by the QMS
    4. Replace the mould with an equivalent item before the customer becomes aware of the damage

    Explanation

    Clause 8.5.3 requires the organization to exercise care with property belonging to customers or external providers while it is under the organization's control or being used. If such property is lost, damaged or otherwise found to be unsuitable for use, the organization must report this to the customer or external provider and retain documented information on what has occurred.

  38. Question 38Quality management fundamentals and ISO 9001 requirements

    Clause 8.3.3 requires the organization to determine the requirements essential for the specific type of products and services to be designed and developed. Which of the following is an input the clause explicitly lists?

    1. The marketing budget allocated to the product launch and the expected sales volume
    2. The availability of second-source suppliers for each purchased component
    3. The cost of the design and development process and the budget available for it
    4. The potential consequences of failure Correct answer.

    Explanation

    Design and development inputs include functional and performance requirements, information from previous similar activities, statutory and regulatory requirements, standards or codes of practice the organization has committed to, and the potential consequences of failure due to the nature of the products and services. Inputs must be adequate, complete and unambiguous.

  39. Question 39Quality management fundamentals and ISO 9001 requirements

    A prototype is tested in the laboratory against the design specifications; later the product is trialled by end users in its intended application. Which clause requirement does each activity satisfy?

    1. Both activities satisfy design and development validation, because both demonstrate the product works
    2. Both activities satisfy design and development verification, because both compare results against criteria
    3. The laboratory testing satisfies validation; the user trial satisfies verification
    4. The laboratory testing satisfies verification; the user trial satisfies validation Correct answer.

    Explanation

    Verification confirms that design and development outputs meet the input requirements, while validation confirms that the resulting products and services meet the requirements for the specified application or intended use. Laboratory testing against specifications is therefore verification, and use in the intended application is validation.

  40. Question 40Quality management fundamentals and ISO 9001 requirements

    Clause 8.5.5 requires the organization to meet requirements for post-delivery activities. When determining their extent, what must the organization consider?

    1. Statutory requirements, potential undesired consequences, intended lifetime and customer feedback Correct answer.
    2. Only the terms explicitly agreed in the sales contract, plus any discount offered at the time of the sale
    3. Only the organization's internal audit schedule and the findings raised in the previous certification audit
    4. Only the profitability of the after-sales service line and the cost of providing spare parts to distributors

    Explanation

    When determining the extent of post-delivery activities, the organization must consider statutory and regulatory requirements, the potential undesired consequences associated with the products and services, their nature, use and intended lifetime, customer requirements, and customer feedback. The list is broader than the contract alone.

  41. Question 41Audit principles, audit types and the audit programme (ISO 19011)

    Which audit principle creates the obligation to report audit findings truthfully, accurately and in a timely manner?

    1. Due professional care
    2. Integrity
    3. Fair presentation Correct answer.
    4. Evidence-based approach

    Explanation

    ISO 19011 defines fair presentation as the obligation to report truthfully and accurately, including reporting significant obstacles encountered and unresolved divergences of opinion. It governs how findings, conclusions and reports are communicated to the auditee and other interested parties.

  42. Question 42Audit principles, audit types and the audit programme (ISO 19011)

    An organisation audits its own quality management system using its own staff. This is best described as:

    1. A third-party audit
    2. A certification audit
    3. An internal audit Correct answer.
    4. A second-party audit

    Explanation

    Audits are classified by the relationship between the auditor and the auditee. When an organisation audits its own management system, the audit is a first-party, or internal, audit.

  43. Question 43Audit principles, audit types and the audit programme (ISO 19011)

    Which situation describes a second-party audit?

    1. An organisation auditing one of its suppliers against contractual requirements Correct answer.
    2. An organisation auditing its own departments against its procedures
    3. An independent certification body auditing an organisation's management system
    4. A regulator inspecting an organisation within its legal jurisdiction

    Explanation

    A second-party audit is carried out by a party that has an interest in the auditee, typically a customer auditing a supplier or a purchaser auditing a contractor. The auditor is external to the auditee but is not an independent third party.

  44. Question 44Audit principles, audit types and the audit programme (ISO 19011)

    In ISO 19011 terminology, an audit programme is best described as:

    1. A set of one or more audits planned for a specific time frame Correct answer.
    2. The agenda of meetings held during a single audit
    3. The scope, criteria and timetable of one individual audit
    4. A checklist used by the audit team during fieldwork

    Explanation

    The audit programme covers the arrangements for a set of audits planned for a specific time frame and directed at a specific purpose. A single audit within that set is covered by an audit plan.

  45. Question 45Audit principles, audit types and the audit programme (ISO 19011)

    What is the purpose of an audit plan?

    1. To list the corrective actions the auditee must take after the audit
    2. To record the findings and conclusions reached by the audit team
    3. To define the objectives of the audit programme for the coming year
    4. To describe the activities and arrangements for an individual audit Correct answer.

    Explanation

    An audit plan provides the basis for agreement among the audit client, audit team and auditee on how a specific audit will be conducted. It covers objectives, scope, criteria, dates, team roles and methods for that single audit.

  46. Question 46Audit principles, audit types and the audit programme (ISO 19011)

    Two or more management systems of the same auditee are audited together in one audit. This is called:

    1. A combined audit Correct answer.
    2. A joint audit
    3. A surveillance audit
    4. A follow-up audit

    Explanation

    ISO 19011 defines a combined audit as an audit carried out together on two or more management systems of the same auditee. It should not be confused with a joint audit, where two or more auditing organisations cooperate.

  47. Question 47Audit principles, audit types and the audit programme (ISO 19011)

    Which audit principle requires that conclusions be reached only from verifiable information obtained through a rational and systematic process?

    1. Integrity
    2. Due professional care
    3. Risk-based approach
    4. Evidence-based approach Correct answer.

    Explanation

    The evidence-based approach requires auditors to use systematic processes to obtain and verify information, and to base findings and conclusions solely on that evidence. Sampling is used because an audit is conducted within a limited time and with limited resources.

  48. Question 48Audit principles, audit types and the audit programme (ISO 19011)

    Why does ISO 19011 require risks and opportunities to be considered when establishing an audit programme?

    1. To satisfy the documentation requirements of a certification body
    2. To guarantee that no nonconformity escapes detection
    3. To reduce the number of auditors needed for each audit
    4. To focus audit effort where it matters and improve programme effectiveness Correct answer.

    Explanation

    A risk-based audit programme directs attention and resources towards areas of higher risk to the auditee's objectives and to the programme's own effectiveness. Risks to the programme itself, such as resource or competence shortfalls, are also identified so that they can be addressed.

  49. Question 49Audit principles, audit types and the audit programme (ISO 19011)

    Which of the following is an example of a remote audit method?

    1. Walking through the warehouse with the auditee's staff
    2. Interviewing process owners by video conference Correct answer.
    3. Inspecting physical records in the auditee's archive
    4. Observing a production line while it is running

    Explanation

    ISO 19011 distinguishes on-site and remote methods, where remote means the audit activities are performed at a distance from the auditee using electronic means. Interviews conducted by video conference are remote, whereas physical observation and inspection are on-site.

  50. Question 50Audit principles, audit types and the audit programme (ISO 19011)

    According to ISO 19011, the competence of auditors comprises which two elements?

    1. Personal behaviour and the ability to apply knowledge and skills Correct answer.
    2. Technical knowledge of the standard and speed of report writing
    3. Formal qualifications and total years of work experience
    4. Number of training hours completed and number of audits performed

    Explanation

    Competence is defined as the ability to apply knowledge and skills to achieve intended results, and ISO 19011 treats personal behaviour as equally important. The standard therefore addresses both the behavioural attributes of auditors and their knowledge and skills.

  51. Question 51Audit principles, audit types and the audit programme (ISO 19011)

    Which activity falls within the implementation of an audit programme rather than its establishment?

    1. Coordinating and scheduling the audits and audit activities Correct answer.
    2. Evaluating the risks and opportunities associated with the programme
    3. Defining the objectives of the audit programme
    4. Determining the resources needed to deliver the programme

    Explanation

    Establishing the programme covers its objectives, risks and opportunities, extent, responsibilities and resources. Implementing it means putting those arrangements into practice, for example by scheduling audits, selecting teams, defining each audit's scope and criteria and managing records.

  52. Question 52Audit principles, audit types and the audit programme (ISO 19011)

    What does the time needed to conduct an audit depend on, according to ISO 19011?

    1. Only the number of auditors in the team
    2. Only the number of nonconformities raised in previous audits
    3. The scope and complexity of the audit and the methods used Correct answer.
    4. The fee agreed between the auditor and the audit client

    Explanation

    Audit duration is determined by factors such as the scope of the audit, the complexity of the processes and the audit methods chosen, including sampling. Commercial considerations such as fees play no part in determining the time required.

  53. Question 53Audit principles, audit types and the audit programme (ISO 19011)

    In ISO 19011 terminology, 'audit criteria' means:

    1. The evidence gathered and verified during the audit
    2. The competence requirements applied to the audit team
    3. The findings and conclusions presented in the audit report
    4. The set of requirements used as a reference against which evidence is compared Correct answer.

    Explanation

    Audit criteria are the set of policies, procedures, standards, legal requirements or other requirements against which audit evidence is compared. Findings arise from comparing evidence with these criteria.

  54. Question 54Audit principles, audit types and the audit programme (ISO 19011)

    Which of the following is a suitable performance indicator for monitoring an audit programme?

    1. The percentage of audits completed as scheduled Correct answer.
    2. The number of documents held in the auditee's document system
    3. The total number of employees in the auditee organisation
    4. The daily fee charged for each auditor

    Explanation

    ISO 19011 requires the audit programme to be monitored so that progress against its objectives can be assessed. Indicators therefore relate to programme performance, such as whether audits are completed as planned or whether findings are being closed in a timely way.

  55. Question 55Audit principles, audit types and the audit programme (ISO 19011)

    Which responsibility belongs to the audit team leader?

    1. Setting the audit criteria for the entire audit programme
    2. Deciding whether the auditee's certification will be granted
    3. Preparing the audit plan and representing the audit team in dealings with the auditee Correct answer.
    4. Approving the budget allocated to the audit programme

    Explanation

    The team leader manages the audit itself, including preparing the audit plan, allocating work, leading the team and communicating with the auditee and client. Programme-level decisions remain with the person managing the audit programme.

  56. Question 56Audit principles, audit types and the audit programme (ISO 19011)

    What should trigger a review of the audit programme?

    1. Only the appointment of a new quality manager
    2. Only the expiry of the organisation's certificates
    3. Monitoring results showing that the programme is not meeting its objectives Correct answer.
    4. Only a request from the certification body

    Explanation

    ISO 19011 requires the audit programme to be reviewed so that improvements can be identified and implemented. Reviews are triggered by monitoring and measurement results, changes in the auditee's context or feedback from interested parties.

  57. Question 57Audit principles, audit types and the audit programme (ISO 19011)

    ISO 19011 states that records of the audit programme should be:

    1. created only when a nonconformity has been raised
    2. kept for exactly five years in every organisation
    3. destroyed once the closing meeting has taken place
    4. retained as evidence of the programme's implementation, in line with the organisation's requirements Correct answer.

    Explanation

    Records demonstrate that the audit programme has been implemented as planned and provide traceability for audit results. The standard leaves retention periods to the organisation's own requirements and applicable obligations.

  58. Question 58Audit principles, audit types and the audit programme (ISO 19011)

    An auditor has, until recently, been the manager responsible for the process now being audited. What is the appropriate position?

    1. The auditor may proceed, because objectivity is only expected in third-party audits
    2. The auditor may proceed provided another auditor reviews the findings
    3. The auditor should not audit that process, because their objectivity could be compromised Correct answer.
    4. The auditor may proceed provided the audit is conducted unannounced

    Explanation

    The principle of independence requires auditors to be free from bias and conflict of interest, and to remain objective throughout the audit. A recent operational responsibility for the process being audited is a threat to that objectivity that should be avoided rather than mitigated after the fact.

  59. Question 59Audit principles, audit types and the audit programme (ISO 19011)

    What does a risk-based approach to sampling mean in the conduct of an audit?

    1. Auditors examine every record within the audit scope
    2. Auditors use professional judgement to sample where the risk of an incorrect conclusion is highest Correct answer.
    3. Auditors select samples purely at random so that no process is favoured
    4. Sample sizes are fixed by the certification body for each standard

    Explanation

    Because an audit is conducted within a limited time and with limited resources, ISO 19011 expects sampling to be planned so that the audit team obtains sufficient and appropriate evidence. Samples are therefore drawn where the risk of reaching an incorrect conclusion is greatest.

  60. Question 60Audit principles, audit types and the audit programme (ISO 19011)

    Which factors most directly determine the extent of an audit programme?

    1. Only the number of employees at each site
    2. Only the number of auditors available within the organisation
    3. Only the findings raised during the previous certification cycle
    4. The size and complexity of the auditee and the number, significance and frequency of audits Correct answer.

    Explanation

    ISO 19011 links the extent of the audit programme to the size, nature and complexity of the auditee and to the number, importance, frequency, duration and location of the audits to be performed. Programme extent is therefore a judgement based on several interacting factors.

  61. Question 61Auditor competence, personal attributes and ethical conduct

    Which guiding principle requires that audit findings, conclusions and reports reflect truthfully and accurately the audit activities?

    1. Independence
    2. Evidence-based approach
    3. Confidentiality
    4. Fair presentation Correct answer.

    Explanation

    Fair presentation obliges the audit team to report what was actually found, including significant obstacles encountered and unresolved diverging opinions. Accuracy and completeness of the audit report are the core of this principle.

  62. Question 62Auditor competence, personal attributes and ethical conduct

    Which personal attribute describes an auditor who persists in pursuing audit objectives despite setbacks and resistance?

    1. Observant
    2. Diplomatic
    3. Tenacious Correct answer.
    4. Decisive

    Explanation

    Tenacity is the attribute of being persistent and focused on achieving objectives, allowing an auditor to stay on course when evidence is hard to obtain or when the auditee is uncooperative.

  63. Question 63Auditor competence, personal attributes and ethical conduct

    Which action best demonstrates the guiding principle of confidentiality?

    1. Securing audit records from unauthorised access Correct answer.
    2. Posting the audit report on a public website
    3. Discussing findings with a friend at the auditee
    4. Sharing findings with other clients for comparison

    Explanation

    Confidentiality requires auditors to exercise discretion and to keep audit information secure, using it only for the purpose for which it was obtained. Records must be protected from disclosure to anyone not authorised to receive them.

  64. Question 64Auditor competence, personal attributes and ethical conduct

    During an audit, an auditee explains a process in a way that contradicts the auditor's initial assumption and supports the explanation with records. Which personal attribute should the auditor demonstrate?

    1. Tenacity in defending the original assumption
    2. Diplomacy in avoiding further questions
    3. Decisiveness by closing the issue at once
    4. Open-mindedness in reconsidering the evidence Correct answer.

    Explanation

    Open-mindedness is the willingness to consider alternative ideas and to change a view when the evidence warrants it. Auditors must weigh the auditee's explanation on its merits rather than defend a preconception.

  65. Question 65Auditor competence, personal attributes and ethical conduct

    What is the main purpose of continuing professional development for auditors?

    1. To qualify for higher daily fee rates
    2. To reduce the number of audits required
    3. To maintain and improve competence Correct answer.
    4. To replace the need for audit records

    Explanation

    Auditors are expected to maintain and improve the knowledge and skills needed for their auditing assignments through ongoing professional development. This keeps competence current as technology, standards and sector practices change.

  66. Question 66Auditor competence, personal attributes and ethical conduct

    An auditor is offered an assignment to audit an organisation where, until six months ago, they were the quality manager. What is the most appropriate response?

    1. Accept if the auditee confirms in writing that it has no objection
    2. Accept, but avoid auditing the processes they managed
    3. Accept and disclose the previous role in the audit report
    4. Decline, because of the conflict of interest Correct answer.

    Explanation

    Auditors must remain independent of the activity being audited and must not audit their own work. A recent organisation-wide QMS role creates a self-review conflict that cannot be cured by partial scope exclusions or auditee consent.

  67. Question 67Auditor competence, personal attributes and ethical conduct

    Which statement about the role of a technical expert on an audit team is correct?

    1. The expert counts as an auditor when sizing the team
    2. The expert provides advice but does not audit Correct answer.
    3. The expert may lead the audit if the lead auditor is absent
    4. The expert may report findings directly to top management

    Explanation

    A technical expert contributes specific knowledge or expertise to the audit team but does not act as an auditor and does not audit on their own. Their input supports the team's work under the direction of the audit team leader.

  68. Question 68Auditor competence, personal attributes and ethical conduct

    Which of the following is a valid method for evaluating an auditor's performance?

    1. Reviewing the auditor's own travel expense claims
    2. Counting the auditor's years of service
    3. Checking the number of audits the auditor has invoiced
    4. Observing the auditor during an audit Correct answer.

    Explanation

    Auditor performance should be evaluated using evidence of how the auditor actually works, such as observation of audits, review of audit reports and records, and feedback from auditees and team members.

  69. Question 69Auditor competence, personal attributes and ethical conduct

    An auditor observes a practice that appears unsafe and hears conflicting explanations. Which action best reflects the evidence-based approach?

    1. Disregard it because no documented information was produced
    2. Raise a major nonconformity immediately
    3. Accept the senior manager's explanation as fact
    4. Corroborate the facts before drawing a conclusion Correct answer.

    Explanation

    The evidence-based approach requires conclusions to rest on verifiable information, so conflicting accounts must be checked against records, observations and interviews. Seniority of the person speaking does not make a statement evidence.

  70. Question 70Auditor competence, personal attributes and ethical conduct

    How should unresolved diverging opinions between the audit team and the auditee be handled?

    1. Excluded from the report to avoid dispute
    2. Recorded and reported together with the findings Correct answer.
    3. Referred to the accreditation body immediately
    4. Resolved by the auditee's top management before reporting

    Explanation

    Under fair presentation, significant obstacles and unresolved disagreements between the audit team and the auditee are recorded and reported along with the audit findings. Suppressing them would misrepresent the audit.

  71. Question 71Auditor competence, personal attributes and ethical conduct

    Applying a risk-based approach means the audit team should:

    1. Audit only processes with the highest risk scores
    2. Focus effort on matters significant to the objectives Correct answer.
    3. Focus on past nonconformities and ignore emerging risks
    4. Use the same checklist for every audit regardless of risk

    Explanation

    A risk-based approach directs audit time and attention to those matters that are most significant to achieving the audit objectives. It is a way of prioritising effort, not a rule for excluding processes.

  72. Question 72Auditor competence, personal attributes and ethical conduct

    Which responsibility belongs to the audit team leader rather than to an individual team member?

    1. Assigning tasks and guiding team members Correct answer.
    2. Carrying out assigned audit tasks
    3. Documenting their own observations
    4. Preparing checklists for an assigned area

    Explanation

    The audit team leader plans the audit, assigns work to team members, guides the team and is responsible for the overall conduct and reporting of the audit. Individual members are responsible for their assigned tasks.

  73. Question 73Auditor competence, personal attributes and ethical conduct

    An auditor has audited the same organisation for eight consecutive years and has developed close personal relationships with its managers. Which type of threat to impartiality does this illustrate?

    1. Advocacy
    2. Self-review
    3. Intimidation
    4. Familiarity Correct answer.

    Explanation

    Familiarity arises when an auditor becomes too close to the auditee over time, so that friendship or long association erodes objectivity. Rotation of auditors and evaluation of threats are the usual controls.

  74. Question 74Auditor competence, personal attributes and ethical conduct

    After the closing meeting, an auditee's top management disputes a nonconformity. What is the most appropriate action for the lead auditor?

    1. Keep it if the evidence is verifiable and record the disagreement Correct answer.
    2. Withdraw the finding so as to preserve the client relationship
    3. Ask the auditee's quality manager to decide the outcome
    4. Refer the matter to the certification body's commercial team immediately

    Explanation

    Findings supported by verifiable evidence must stand, and any unresolved disagreement is recorded and reported under fair presentation. Commercial considerations cannot override the integrity of audit conclusions.

  75. Question 75Auditor competence, personal attributes and ethical conduct

    Which of the following best demonstrates that an audit team as a whole is competent for a specific audit?

    1. Every member holds a current auditor certificate from a recognised scheme
    2. The team has audited the same organisation before
    3. The team collectively covers the scope and objectives Correct answer.
    4. Every member has at least ten years of experience in auditing

    Explanation

    Competence is assessed against the needs of the particular audit, so the team's combined knowledge and skills must cover the audit scope, objectives and the processes to be audited. Individual qualifications and experience only count insofar as they fill those needs.

  76. Question 76Auditor competence, personal attributes and ethical conduct

    During an audit, the auditee's manager offers an auditor a valuable gift as a gesture of goodwill. What is the most appropriate response?

    1. Accept it, since local custom should always be respected
    2. Accept it discreetly so as not to cause embarrassment
    3. Accept it, but record it in the audit report as a courtesy
    4. Decline it, as it could compromise impartiality Correct answer.

    Explanation

    Ethical conduct requires auditors to avoid gifts or hospitality that could influence, or be seen to influence, their judgement and conclusions. Local custom does not override the obligation to remain impartial and to be seen to be impartial.

  77. Question 77Audit planning and preparation (documentation review, audit plan, working documents)

    What is the primary purpose of an audit plan?

    1. To set out the organisation's quality objectives for the coming year
    2. To list the qualifications and audit history of each team member
    3. To record the nonconformities identified during the audit
    4. To describe the activities and arrangements for conducting a specific audit Correct answer.

    Explanation

    An audit plan is the description of the activities and arrangements for an audit, prepared by the audit team leader with input from the team and agreed with the audit client. It is a planning tool that sets out how the audit will be conducted, not a record of results.

  78. Question 78Audit planning and preparation (documentation review, audit plan, working documents)

    In a two-stage certification audit, what is the main purpose of the stage 1 audit?

    1. To verify that all corrective actions from earlier audits have been closed
    2. To sample records and interview process owners in depth
    3. To evaluate the documented information and the organisation's readiness for stage 2 Correct answer.
    4. To determine overall conformity and recommend certification

    Explanation

    Stage 1 is a readiness review that examines documented information, the organisation's understanding of the standard, scope and site conditions, so that stage 2 can focus on implementation and effectiveness. Certification decisions are not taken at stage 1.

  79. Question 79Audit planning and preparation (documentation review, audit plan, working documents)

    Which term describes the set of policies, procedures and requirements against which audit evidence is compared?

    1. Audit criteria Correct answer.
    2. Audit trail
    3. Audit programme
    4. Audit scope

    Explanation

    Audit criteria are the requirements used as a reference against which objective evidence is compared. The standard, the organisation's own procedures and applicable customer or regulatory requirements can all form part of the criteria.

  80. Question 80Audit planning and preparation (documentation review, audit plan, working documents)

    How does an audit programme differ from an audit plan?

    1. The programme lists audit criteria, while the plan lists audit findings
    2. The programme is prepared by the auditee, while the plan is prepared by the auditor
    3. The programme applies only to certification audits, while the plan applies to internal audits
    4. The programme covers a set of audits over a time frame, while the plan covers a single audit Correct answer.

    Explanation

    An audit programme is the arrangements for a set of audits planned over a defined period, while an audit plan describes the activities and arrangements for one individual audit within that programme. Confusing the two level of documents is a common planning error.

  81. Question 81Audit planning and preparation (documentation review, audit plan, working documents)

    Which element of the audit plan defines the extent and boundaries of the audit, including sites, processes and the period covered?

    1. The audit schedule
    2. The audit criteria
    3. The audit objectives
    4. The audit scope Correct answer.

    Explanation

    The scope establishes the boundaries of the audit, such as the locations, functions, processes and time period to be examined. Objectives state what the audit is to achieve, and criteria state the requirements used for comparison.

  82. Question 82Audit planning and preparation (documentation review, audit plan, working documents)

    When should the audit plan normally be communicated to the auditee?

    1. In advance of the audit, after agreement with the audit client Correct answer.
    2. After the audit report has been issued
    3. Only at the closing meeting
    4. Only if the auditee requests it

    Explanation

    The plan is agreed with the audit client and provided to the auditee sufficiently in advance so that resources, personnel and information can be arranged. Late or withheld plans undermine the cooperation needed for an effective audit.

  83. Question 83Audit planning and preparation (documentation review, audit plan, working documents)

    Why does an auditor review the auditee's documented information before the audit?

    1. To rewrite the organisation's procedures before the audit begins
    2. To gain an understanding of the organisation's processes and prepare lines of enquiry Correct answer.
    3. To confirm the certification decision without visiting the site
    4. To determine the audit findings so that on-site time can be shortened

    Explanation

    Documentation review is preparation: it builds understanding of the system, processes and interfaces, and helps the auditor target areas to examine and questions to ask. Findings must still be based on objective evidence gathered during the audit.

  84. Question 84Audit planning and preparation (documentation review, audit plan, working documents)

    Which of the following are examples of audit working documents?

    1. The organisation's quality manual and quality policy
    2. Checklists, sampling plans and forms for recording evidence Correct answer.
    3. The certification certificate and the audit report
    4. The audit client's contract and quotation

    Explanation

    Working documents are the materials an auditor prepares or uses to conduct and record the audit, such as checklists, sampling plans and evidence-recording forms. They support the audit and provide a traceable record of what was examined.

  85. Question 85Audit planning and preparation (documentation review, audit plan, working documents)

    When deciding which records and process instances to sample during an audit, an auditor should base the selection on:

    1. Whichever records are quickest to retrieve from the system
    2. The significance of the activity, associated risks and the reliability of the controls Correct answer.
    3. A fixed sample of exactly three records for every clause
    4. The records the auditee has specially prepared for the audit visit

    Explanation

    Sampling in an audit should be purposeful and representative: the auditor weighs the importance of the activity, the risks of failure and the strength of existing controls. Convenience or auditee-prepared samples undermine the credibility of conclusions.

  86. Question 86Audit planning and preparation (documentation review, audit plan, working documents)

    When allocating audit time across processes in the audit plan, the greatest weight should normally be given to:

    1. Processes with the largest number of documented procedures
    2. Departments whose managers have requested the longest meetings
    3. Departments located nearest to the meeting room
    4. Processes most significant to the QMS and to meeting requirements, together with results of previous audits Correct answer.

    Explanation

    Time allocation should follow significance and risk: processes critical to product and service conformity, customer requirements and QMS performance need proportionally more time. Prior audit results also signal where more attention is warranted.

  87. Question 87Audit planning and preparation (documentation review, audit plan, working documents)

    Shortly before the audit, the auditee objects that one of the assigned auditors previously worked as their production manager. The auditor should:

    1. Refer the matter to the audit team leader and audit client so that the assignment can be reviewed Correct answer.
    2. Withdraw from the audit team without informing anyone
    3. Ignore the objection and proceed with the assignment as planned
    4. Ask the auditee to provide written evidence of the past employment

    Explanation

    Independence and freedom from bias are fundamental to audit credibility. Where a potential conflict is raised, it must be assessed by those responsible for the audit so that a decision on reassignment or safeguards can be taken and recorded.

  88. Question 88Audit planning and preparation (documentation review, audit plan, working documents)

    Under what circumstances should an audit plan be revised during the audit?

    1. Never; the plan agreed at the opening meeting must be followed exactly
    2. Only when the auditee asks for a shorter audit
    3. When audit progress or emerging evidence shows the planned arrangements are no longer appropriate Correct answer.
    4. Only when a nonconformity has already been recorded

    Explanation

    The plan is a tool, not a constraint; if the audit reveals unexpected risk or time is overrunning, the plan should be adjusted and the change agreed with those affected. Changes should be recorded so that the audit remains traceable.

  89. Question 89Audit planning and preparation (documentation review, audit plan, working documents)

    During the documentation review, the auditor notes that the organisation has no documented procedure for a process where ISO 9001 does not require one. The auditor should:

    1. Plan to verify through interviews and observation whether the process is effective and its outputs meet requirements Correct answer.
    2. Ask the organisation to write the procedure before the opening meeting
    3. Cancel the audit because the documented information is incomplete
    4. Immediately record a nonconformity for a missing documented procedure

    Explanation

    ISO 9001 requires documented information only where the standard specifies it or where the organisation determines it is necessary for process effectiveness. Absence of an optional procedure is therefore not a nonconformity; effectiveness is verified through evidence of how the process operates.

  90. Question 90Audit planning and preparation (documentation review, audit plan, working documents)

    When planning an audit that covers several sites, the auditor should take into account:

    1. Only the number of employees at each site
    2. The activities performed at each site, their complexity and the results of previous audits Correct answer.
    3. Only the distance between sites so that travel can be minimised
    4. The preference of site managers about whether to be audited

    Explanation

    Multi-site planning must reflect what each site actually does, how complex and risky those activities are, and how the site has performed previously. Headcount alone does not indicate the audit effort needed.

  91. Question 91Audit planning and preparation (documentation review, audit plan, working documents)

    Which statement best describes the correct use of an audit checklist?

    1. The checklist replaces the need to collect objective evidence
    2. The auditor must ask every question on the checklist in the order written
    3. The checklist should be kept confidential from the rest of the audit team
    4. The checklist guides the auditor but should be adapted to follow audit trails and evidence found Correct answer.

    Explanation

    A checklist is an aide-memoire that helps ensure coverage; it should not prevent the auditor from pursuing leads, sampling further or following process interfaces. Rigid adherence can cause significant evidence to be missed.

  92. Question 92Audit planning and preparation (documentation review, audit plan, working documents)

    Which set of items belongs in an audit plan?

    1. Audit objectives, scope and criteria, dates, locations, team and schedule Correct answer.
    2. The auditor's employment history and fee rates
    3. The auditee's quality objectives, KPIs and satisfaction scores
    4. Audit findings, nonconformities and recommendations

    Explanation

    The plan sets out what is to be audited, against what, by whom, where and when. This allows the auditee to arrange access and personnel and gives the team a shared basis for conducting the audit.

  93. Question 93Audit planning and preparation (documentation review, audit plan, working documents)

    When part of an audit is to be conducted remotely, the auditor should plan to:

    1. Let the auditee choose the platform on the day of the audit
    2. Record fewer findings because evidence obtained remotely is not valid evidence
    3. Reduce the audit criteria so that fewer records need to be viewed online
    4. Confirm the ICT platforms, access to information, and arrangements for confidentiality and security with the auditee beforehand Correct answer.

    Explanation

    Remote auditing requires the same rigour as on-site work, so connectivity, access to records and information security must be arranged and tested in advance. The audit criteria are unaffected by the method used.

  94. Question 94Audit planning and preparation (documentation review, audit plan, working documents)

    The documentation review reveals that a stated procedure does not appear to address a requirement of ISO 9001. Before the audit, the auditor should:

    1. Record a nonconformity against the procedure and close the audit early
    2. Remove the requirement from the audit criteria
    3. Rewrite the procedure so that it complies with the standard
    4. Note the apparent gap as an area to investigate and verify how the process actually operates Correct answer.

    Explanation

    A document gap seen on paper is a lead, not a conclusion. The auditor should plan to test whether the requirement is met in practice through interviews, observation and records before deciding whether a nonconformity exists.

  95. Question 95Audit planning and preparation (documentation review, audit plan, working documents)

    How should time for the opening meeting, closing meeting and team meetings be treated in the audit plan?

    1. It should be left out, since meetings are not part of the audit
    2. It should be included in the total audit time planned Correct answer.
    3. It should be added on top of the audit days and not counted
    4. It should be counted only if a representative of the client attends

    Explanation

    Audit duration covers all audit activities, including meetings, document review and reporting, so meeting time must be built into the plan. Excluding it distorts the time available for examining processes.

  96. Question 96Audit planning and preparation (documentation review, audit plan, working documents)

    Two days before the audit, the auditee sends a substantially revised quality manual. The auditor should:

    1. Refuse to accept the revision because the plan is already fixed
    2. Carry out the audit against the superseded version to ensure consistency
    3. Postpone the audit until the next surveillance visit
    4. Review the revision, assess the implications, and adjust the areas of focus or plan as necessary Correct answer.

    Explanation

    Preparation must reflect the system as it actually is at the time of the audit. A late revision should be reviewed and its implications for the plan assessed, since processes and responsibilities may have changed.

  97. Question 97Audit planning and preparation (documentation review, audit plan, working documents)

    An audit plan allocated only 30 minutes to a process judged low risk, but early in the audit the auditor finds indicators of a significant failure in that process. The auditor should:

    1. Keep strictly to the plan so that the audit remains consistent with the agreed scope
    2. Expand the audit into unrelated processes without informing anyone
    3. Adjust the remaining audit time and plan to investigate further, informing the auditee and team leader of the change Correct answer.
    4. Record the observations and leave them for the next scheduled audit

    Explanation

    Evidence of significant failure raises the risk attached to that process and justifies reallocating effort within the plan. Changes should be agreed with those affected and recorded so the audit remains controlled and traceable.

  98. Question 98Audit planning and preparation (documentation review, audit plan, working documents)

    An auditor prepares for a new audit by reusing a checklist from a previous client, including that client's process names, findings and examples. Why is this inappropriate?

    1. Because checklists must always be written by the auditee
    2. Because checklists from other organisations are not permitted to contain questions
    3. Because the previous checklist would be too long for the new audit
    4. Because it risks disclosing a previous client's confidential information, and working documents should be prepared for the audit in hand Correct answer.

    Explanation

    Auditors must exercise discretion with information acquired during an audit and protect client confidentiality. Working documents should be prepared afresh for the organisation being audited, addressing its own processes and risks.

  99. Question 99Audit planning and preparation (documentation review, audit plan, working documents)

    Which describes good practice when documenting sampling decisions in audit working documents?

    1. Recording what was sampled and why, so that the basis for conclusions can be traced and defended Correct answer.
    2. Recording samples only when a nonconformity is found
    3. Recording nothing, so that the auditee cannot challenge the sample
    4. Recording only the number of the clause that was sampled

    Explanation

    Working documents should allow another person to understand what evidence was examined and how conclusions were reached, which supports the audit trail. Recording the rationale for a sample also helps in any later review of the audit.

  100. Question 100Audit planning and preparation (documentation review, audit plan, working documents)

    During preparation, the auditor finds that the quality manual describes a scope of activities broader than the scope agreed with the audit client. The auditor should:

    1. Ignore the difference because the manual is a controlled document
    2. Audit the broader scope described in the manual
    3. Clarify the discrepancy with the audit client and confirm the scope before proceeding Correct answer.
    4. Record a nonconformity in the scope clause of the standard

    Explanation

    The audit scope is agreed with the audit client and governs what is examined; documented information cannot silently extend it. Any mismatch should be resolved with those who set the scope before audit activity begins.

  101. Question 101Audit planning and preparation (documentation review, audit plan, working documents)

    In a process-based audit, which consideration should most influence the sequence of processes in the audit plan?

    1. The alphabetical order of the departments involved
    2. The interaction and sequence of the processes, including how outputs of one feed others, and the associated risks Correct answer.
    3. The availability of the meeting room booked for interviews
    4. The seniority of the managers who are to be interviewed

    Explanation

    Planning the sequence along the process flow allows the auditor to follow outputs from one process into the next and to test interfaces, which is central to a process approach. Risk helps determine where to start and how much time to allow.

  102. Question 102Audit planning and preparation (documentation review, audit plan, working documents)

    An auditor has completed an audit and written the report. How should the audit working documents now be handled?

    1. They should be retained and protected as agreed in the audit programme and confidentiality arrangements. Correct answer.
    2. They should be passed to the certification body only if the auditee gives written consent for this.
    3. They should be left with the auditee at the closing meeting so that both parties hold an identical record.
    4. They should be destroyed immediately after the closing meeting to protect the auditee's confidential information.

    Explanation

    Working documents are the property of the auditor and are retained at least until audit completion, or for longer where the audit programme or contractual arrangements require it. Throughout their retention they are protected and kept confidential in line with agreed arrangements. The auditee receives the audit report, not the auditor's working papers.

  103. Question 103Audit planning and preparation (documentation review, audit plan, working documents)

    An organisation's internal audit programme schedules several audits across the year. The arrangements for one specific audit, including its dates, team members and processes to be covered, are set out in the:

    1. audit report from the previous audit
    2. organisation's quality manual
    3. audit plan for that audit Correct answer.
    4. audit programme for the year

    Explanation

    The audit programme is the set of arrangements for the audits to be carried out over a period, while the audit plan describes the activities and arrangements for one individual audit. Dates, team assignments and processes to be covered for a single audit therefore belong in the audit plan. The plan is normally agreed with the auditee before the audit.

  104. Question 104Audit planning and preparation (documentation review, audit plan, working documents)

    During preparation, an auditor finds that a work instruction specifies a different inspection frequency from the quality procedure. What is the most appropriate action?

    1. Ask the auditee to amend both documents before the audit begins, and then audit only against the amended versions once they have been reissued.
    2. Record the conflict and verify during the audit which practice is followed and whether the documents are controlled. Correct answer.
    3. Exclude the process from the audit, because the documentation does not provide a clear audit trail.
    4. Treat the more recently dated document as authoritative and disregard the other one during the audit.

    Explanation

    A mismatch found at the desk review stage is a lead rather than a confirmed finding; the auditor must gather evidence of actual practice before concluding. The conflict may indicate a document control weakness, so it is recorded and followed up during the audit, when the auditor can also check which instruction staff actually use.

  105. Question 105Audit planning and preparation (documentation review, audit plan, working documents)

    When allocating processes to audit team members in the audit plan, the lead auditor should give greatest weight to:

    1. Letting each team member choose the processes they are most interested in auditing.
    2. Assigning each process to the most senior team member available on the team.
    3. The competence of each member for the process and the need to avoid conflicts of interest. Correct answer.
    4. Spreading the processes equally so that every team member audits the same number.

    Explanation

    Audit tasks are assigned according to the competence needed for each process and to the requirement that auditors remain objective and impartial. An equal workload split or personal preference does not by itself produce reliable evidence. Where a member lacks the needed competence or has a conflict, the allocation must be changed.

  106. Question 106Audit planning and preparation (documentation review, audit plan, working documents)

    An auditee supplies a very large volume of documented information, much of it unrelated to the agreed audit scope and criteria. What is the most appropriate preparation approach?

    1. Review the complete set of documents so that no relevant item is missed during the audit.
    2. Select the documents relevant to the audit scope and criteria, and record the basis for that selection. Correct answer.
    3. Defer the documentation review to the opening meeting and examine documents only as each process is audited.
    4. Ask the auditee to reduce the documentation to only what the auditor intends to examine during the audit.

    Explanation

    Preparation should be proportionate: the auditor reviews the documented information needed to plan the audit against the agreed scope, objectives and criteria. Selecting relevant documents and recording why they were chosen supports the audit trail and later sampling decisions. Reviewing everything or deferring the review to the audit itself undermines planning.

  107. Question 107Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    What is the primary purpose of an opening meeting in a QMS audit?

    1. To issue nonconformities that were already identified in the document review
    2. To decide the audit scope and criteria, which are still open at this stage of the audit
    3. To determine whether the organization's quality objectives are measurable and tracked
    4. To confirm the audit plan and agree how the audit will be conducted Correct answer.

    Explanation

    ISO 19011 describes the opening meeting as the point where the audit plan, audit criteria, scope and the way the audit will be conducted are confirmed with the auditee. Scope and criteria are agreed earlier, at the audit programme and planning stage. Nonconformities are only determined after evidence has been gathered, not at the opening meeting.

  108. Question 108Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    Who normally opens the audit on behalf of the audit team?

    1. The audit client's senior representative, because the client pays for the audit
    2. The organization's quality manager, because they own the quality management system
    3. The lead auditor, supported by the audit team Correct answer.
    4. Any member of the audit team who happens to be available at the scheduled time

    Explanation

    The opening meeting is chaired by the lead auditor, who may introduce the other team members. The auditee's management is present to receive the team and confirm arrangements, not to run the meeting. The client's representative has no operational role in conducting the audit itself.

  109. Question 109Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    Which questioning technique is most useful at the start of an interview with a process owner?

    1. An open question about what the person does and how the process works Correct answer.
    2. A series of rapid closed questions to cover as many clauses as possible
    3. A leading question that suggests to the interviewee the answer that is expected
    4. A closed question that confirms a yes or no answer about a specific record

    Explanation

    Open questions invite the interviewee to describe their work in their own words and reveal how the process is actually run. Closed questions are useful later to confirm specific points once the overall picture is understood. Leading questions should be avoided because they push the interviewee toward the answer the auditor expects.

  110. Question 110Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    Which of the following is a valid source of objective evidence in a QMS audit?

    1. Records and documents reviewed and verified by the auditor Correct answer.
    2. An auditor's general impression of the organization's quality culture
    3. Opinions expressed informally by employees in the canteen
    4. The audit team's prior experience with similar organizations

    Explanation

    Objective evidence is information that can be verified and is based on facts, such as records, documents, observations and statements confirmed against other sources. Impressions and informal opinions may prompt further investigation but are not evidence on their own. Prior experience of other organizations is irrelevant to this organization's conformity.

  111. Question 111Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    When an auditor samples records, what should the sample be?

    1. Selected by the auditee as the records they consider to be the best examples
    2. Large enough to prove statistically that no nonconformity exists
    3. Representative of the population being examined Correct answer.
    4. Limited to the most recent month so that the audit can be completed on time

    Explanation

    Sampling must give the audit team a fair picture of the whole population, so the sample should be representative and its selection should be explained. Allowing the auditee to choose the sample biases the evidence. No sample can prove the absence of all nonconformities.

  112. Question 112Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    During interviews, what is the best practice for recording information?

    1. Take notes as you go and confirm key points with the interviewee Correct answer.
    2. Rely on memory and write up the findings after the audit is closed
    3. Record the interview in full on video without telling the interviewee
    4. Ask the interviewee to write a summary statement and sign it

    Explanation

    Notes taken during the interview preserve accuracy, and confirming key points with the interviewee reduces the risk of misunderstanding. Covert recording is unethical and undermines trust. Findings should be recorded as the audit progresses, not reconstructed from memory afterwards.

  113. Question 113Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    Which item is typically covered in the opening meeting?

    1. A detailed presentation of every clause of ISO 9001 that will be audited
    2. Confirmation of the audit criteria, scope and schedule Correct answer.
    3. The audit team's evaluation of the effectiveness of the audited processes
    4. A decision on which nonconformities will be raised during the audit

    Explanation

    The opening meeting confirms practical arrangements: the audit plan and schedule, the criteria and scope, the methods to be used and the communication channels. Clause-by-clause teaching is not part of the meeting. Findings and evaluations can only emerge once evidence has been examined.

  114. Question 114Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    At the end of an interview, the auditor should:

    1. leave quickly so that the next interview can start on schedule
    2. summarize the information obtained and thank the interviewee Correct answer.
    3. ask the interviewee to sign a statement agreeing with the auditor's findings
    4. promise the interviewee that no findings will be raised against their area

    Explanation

    Summarizing what has been understood allows the interviewee to correct any misunderstanding before the auditor moves on, and courtesy maintains cooperation. Promising outcomes is not possible at that stage. Findings are determined by the audit team against criteria, not agreed by signature with the interviewee.

  115. Question 115Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    During sampling of 20 purchase orders you find one with no approval. What is the most appropriate next step?

    1. Record the single case and continue with the planned sample size unchanged
    2. Extend the sample to see whether the issue is isolated or systemic Correct answer.
    3. Conclude immediately that the whole process is ineffective and stop the audit
    4. Ask the auditee to remove the affected order from the population

    Explanation

    When a sample reveals a possible nonconformity, the auditor investigates further to judge whether it is an isolated lapse or indicates a breakdown in the process. Extending the sample is the standard way to obtain that assurance. Concluding immediately or removing records would distort the evidence.

  116. Question 116Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    Why might an auditor use judgemental rather than random sampling?

    1. To target higher-risk areas, such as new staff or recently changed processes Correct answer.
    2. Because random sampling is not permitted when records are stored electronically
    3. Judgemental sampling removes the need to record which items were examined
    4. Because judgemental samples give statistical confidence about the whole population

    Explanation

    Judgemental sampling lets the auditor concentrate on areas of higher risk or greater change, which is often more informative than pure random selection. It does not provide statistical confidence, so its limitations must be acknowledged. Whatever method is used, the items examined must still be recorded.

  117. Question 117Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    An interviewee states that all suppliers are evaluated annually. How should the auditor treat this statement?

    1. Reject it, because statements from auditees are never objective evidence
    2. Accept it, because the interviewee is the process owner and knows the process
    3. Treat it as a lead and verify it against records or other objective evidence Correct answer.
    4. Record it as a nonconformity until the auditee can prove otherwise

    Explanation

    Interview statements are a valuable source of information but must be corroborated against records, observations or other independent evidence. Accepting them uncritically or rejecting them outright are both wrong. A nonconformity can only be raised when the evidence shows a requirement is not met.

  118. Question 118Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    Which behaviour is appropriate for an auditor during an interview?

    1. Arguing with the interviewee when an answer appears to be incorrect
    2. Discussing the interviewee's individual performance problems
    3. Listening actively and avoiding leading the interviewee Correct answer.
    4. Asking two or three questions at once to save time

    Explanation

    Active listening and neutral, non-leading questions keep the evidence reliable and the interview productive. Arguing puts the interviewee on the defensive and discourages openness. Bundling questions together makes it impossible to know which one was answered.

  119. Question 119Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    An auditor observes a calibration label but the calibration record cannot be found. What does this represent?

    1. Sufficient evidence to close the audit without further sampling
    2. A matter for the next surveillance audit rather than this one
    3. A finding that has to be classified as a major nonconformity straight away
    4. A discrepancy between observation and records, requiring investigation Correct answer.

    Explanation

    An inconsistency between what is observed and what is documented is a signal that needs to be investigated before any conclusion is drawn. The record may exist elsewhere or the label may be out of date. Classification as a nonconformity, and its grade, follows only after the facts are established.

  120. Question 120Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    At the opening meeting the auditee raises a concern that a scheduled interview clashes with a customer visit. How should the lead auditor respond?

    1. Insist the plan is followed exactly, since changes would invalidate the audit
    2. Cancel the affected interview and rely on document review instead
    3. Ask the auditee to move their customer visit to another day
    4. Adjust the schedule where possible while still meeting audit objectives Correct answer.

    Explanation

    The audit plan is a tool for achieving the audit objectives, and it may be adjusted during the audit if necessary, provided the objectives remain achievable. Rigid adherence helps no one, and dropping an interview may leave objectives unmet. The organization's business activities take precedence over audit convenience.

  121. Question 121Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    What is the main purpose of reviewing documents before and during the audit?

    1. To count how many documented procedures the organization has produced
    2. To rewrite the organization's documented information where it is unclear
    3. To confirm the organization holds a certified copy of ISO 9001
    4. To check that documented information supports the processes being audited Correct answer.

    Explanation

    Document review prepares the auditor by showing how processes are intended to work and where to probe for evidence, and it is checked against what actually happens. The volume of procedures is not a measure of conformity. Auditors do not rewrite the auditee's documentation.

  122. Question 122Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    An auditor wants to understand how a shop-floor operator controls a process. Who is the best first interviewee?

    1. The sales manager, because they know customer requirements
    2. The operator who actually performs the process Correct answer.
    3. The chief executive, because they own the quality management system
    4. A former employee who left the organization last year

    Explanation

    The person who performs the process can describe and demonstrate how it really operates, including any workarounds. Senior managers give a strategic view but may not know operational detail. Former employees are not part of the auditee's current workforce and cannot demonstrate current practice.

  123. Question 123Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    Which of the following should be recorded as audit evidence?

    1. Only the documents that the organization provided in advance
    2. The records sampled, the people interviewed and what was observed Correct answer.
    3. Only the nonconformities that are eventually raised in the audit report
    4. Only the opinions the audit team formed during the closing meeting

    Explanation

    Audit records should show what was examined, who was spoken to and what was seen, so the audit trail can be followed later. Recording only nonconformities loses the evidence of conformity. Pre-supplied documents and closing-meeting opinions are not a record of the evidence gathering itself.

  124. Question 124Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    What is the appropriate role of a technical expert during an interview?

    1. To record the auditee's answers and sign the audit findings
    2. To independently decide whether a nonconformity should be raised
    3. To advise the auditor, who still leads the interview and the findings Correct answer.
    4. To take over the interview and ask most of the technical questions to the auditee

    Explanation

    Technical experts provide specialist knowledge and advice but do not audit; the auditor remains responsible for conducting interviews and for the audit findings. Delegating findings to the expert would compromise the auditor's accountability. Recording answers is part of the auditor's evidence gathering.

  125. Question 125Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    When sampling across several sites of the same organization, the auditor should consider:

    1. Selecting sites alphabetically to avoid any appearance of bias
    2. Visiting only the largest site, since it represents the whole system
    3. Letting the organization choose which sites are included in the sample
    4. Differences in processes, shifts, products and past audit results Correct answer.

    Explanation

    A multi-site sample should reflect the factors that create risk and variation across the organization, such as different processes, shift patterns, product lines and previous performance. Visiting only one site or letting the auditee choose undermines the representativeness of the sample. Alphabetical selection is arbitrary and ignores risk.

  126. Question 126Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    What is the typical role of an auditee guide during the audit?

    1. To arrange access to locations, people and records Correct answer.
    2. To review and approve the audit findings before they are reported
    3. To answer questions on behalf of process owners when they are busy
    4. To decide the order in which processes are audited

    Explanation

    Guides help the audit run smoothly by arranging access, introductions and logistics, and may witness the audit on the auditee's behalf. They do not answer for process owners or influence the audit plan. Findings are not subject to the guide's approval.

  127. Question 127Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    An auditor samples 15 of 400 inspection records and finds no errors. Which conclusion is justified?

    1. The remaining 385 records must also be free of error
    2. It gives limited assurance; the process is not proven error-free Correct answer.
    3. No further records need to be examined for this requirement
    4. The process is fully conforming because no errors were found in the sample

    Explanation

    A small sample can support reasonable assurance but cannot demonstrate that every record in the population is correct. Audit sampling is not designed to prove the absence of nonconformity. The auditor should weigh the sample size, the population and the risk when drawing conclusions.

  128. Question 128Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    Two interviewees give conflicting accounts of how a nonconforming product is handled. What should the auditor do?

    1. Raise a nonconformity against both interviewees for inconsistency
    2. Average the two accounts and report the common elements only
    3. Examine records and observe the process to establish what actually happens Correct answer.
    4. Accept the account given by whichever of the two interviewees is more senior

    Explanation

    Conflicting statements are resolved by gathering independent evidence, such as records and direct observation, rather than by rank or by blending the accounts. The auditor's task is to establish what the process actually does. Inconsistency in interviews alone is not proof of a nonconformity.

  129. Question 129Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    An auditor chooses a sample by tracing three delivered orders back through production, inspection and dispatch records. This approach is best described as:

    1. Attribute sampling based on a statistical table
    2. Random sampling of the record population
    3. Tracing a trail to test whether the process links end to end Correct answer.
    4. Sampling only the records that are easiest to retrieve

    Explanation

    Following a small number of items through the whole sequence of stages is a form of trail or vertical sampling, used to check interfaces between processes. It is not random or statistical in character, and it intentionally avoids selecting only convenient records. The approach is valuable for detecting gaps at handover points.

  130. Question 130Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    Which source of evidence generally provides the most reliable information about whether a process is operating as described?

    1. Direct observation of the process being carried out Correct answer.
    2. The documented procedure displayed at the workstation
    3. A description of the process given by the quality manager
    4. A presentation prepared by the process owner for the audit

    Explanation

    Observing the process in operation shows what actually happens rather than what is intended or described. Descriptions, documented procedures and presentations all reflect intent and may not match practice. Observation is normally corroborated with interviews and records to complete the picture.

  131. Question 131Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    An interviewee becomes defensive when asked about a missed calibration. What is the most effective auditor response?

    1. Repeat the same question more firmly until an answer is given
    2. Escalate the matter to the auditee's top management at once and stop the interview
    3. End the interview and raise a nonconformity for lack of cooperation
    4. Rephrase the question in neutral terms and continue fact-finding Correct answer.

    Explanation

    Defensiveness is usually reduced by neutral, non-accusatory phrasing that keeps the interview focused on facts rather than blame. Escalation or ending the interview is disproportionate to a single tense exchange. Repeating the question more firmly tends to increase resistance and yields poorer evidence.

  132. Question 132Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    In a third-party certification audit, who normally conducts the opening meeting?

    1. The audit team leader Correct answer.
    2. The certification body's technical reviewer
    3. The auditee's quality manager
    4. The guide assigned to the audit team

    Explanation

    The opening meeting is conducted by the audit team leader, who is responsible for introducing the team, confirming the plan and explaining how the audit will be conducted. The auditee's representatives attend to receive information and confirm arrangements, not to chair the meeting.

  133. Question 133Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    Which of the following is an open question?

    1. How do you decide when a complaint needs escalation? Correct answer.
    2. Is this complaint form the current version?
    3. You close complaints within five days, don't you?
    4. Do you record every complaint?

    Explanation

    An open question invites the interviewee to explain or describe, so it cannot be answered with a simple yes or no and does not suggest a preferred response. Questions beginning with how, what or why are typically open.

  134. Question 134Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    In audit sampling, what is meant by sampling risk?

    1. The risk that audit files are lost after the audit
    2. The possibility that the sample is not representative of the population examined Correct answer.
    3. The risk that the auditee challenges the audit findings
    4. The risk that the audit overruns its agreed duration

    Explanation

    Sampling risk arises because only part of a population is examined, so conclusions drawn from the sample may not reflect the population as a whole. Auditors manage it by choosing appropriate sample sizes and selection methods.

  135. Question 135Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    What does the appropriateness of audit evidence describe?

    1. The time taken to collect evidence during the audit
    2. The quantity of records examined against the audit criteria
    3. The relevance and reliability of the evidence for the audit criteria Correct answer.
    4. The extent to which evidence is agreed with the auditee

    Explanation

    Sufficiency relates to quantity of evidence, while appropriateness relates to its quality, meaning relevance to the criteria and reliability of the source. Audit conclusions rest on evidence that is both sufficient and appropriate.

  136. Question 136Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    Why should an auditor avoid leading questions when interviewing?

    1. They take too long to answer within a scheduled interview slot
    2. They oblige the interviewee to produce documentary evidence
    3. They cannot be interpreted for interviewees who speak another language
    4. They suggest the expected answer and reduce the reliability of the information Correct answer.

    Explanation

    A leading question signals the reply the auditor expects, so the interviewee may simply confirm it, and the resulting information becomes weak evidence. Neutral, open questions produce more dependable accounts of how the process operates.

  137. Question 137Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    An auditor is deciding how large a sample of despatch records to examine. Which factor justifies a larger sample?

    1. Controls over despatch records appear weak or inconsistent Correct answer.
    2. The records are held electronically rather than on paper
    3. The auditee has provided a comfortable meeting room
    4. The audit is scheduled to finish ahead of time

    Explanation

    Sample size increases with the risk attached to the process and the likelihood of error; where controls look weak, more records must be examined before a conclusion is sound. Where other evidence gives confidence, the sample may be reduced.

  138. Question 138Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    The auditor wants to take copies of personnel training records as evidence. What is the appropriate approach?

    1. Decline to take copies and rely on memory of what was seen
    2. Copy all the records in full so that later analysis can be done off site
    3. Ask the auditee to post the original records to the auditor
    4. Take only copies that are needed and protect their confidentiality Correct answer.

    Explanation

    Evidence gathering should be limited to what is relevant to the audit objectives, and the auditor must treat the information as confidential, particularly where it contains personal data. Taking only the necessary extracts reflects both principles.

  139. Question 139Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    At the opening meeting the auditee states that the warehouse is outside the agreed audit scope and refuses access. What should the audit team leader do?

    1. Record the disagreement and resolve it with the audit client Correct answer.
    2. Continue without the warehouse and note the omission in the audit report
    3. Suspend the audit and leave the site immediately
    4. Insist on access because the audit plan was issued to the auditee in advance

    Explanation

    The scope is agreed with the audit client, who commissions the audit; where a disagreement arises at the opening meeting, the team leader records it and refers the matter to the client for resolution. The audit team cannot unilaterally change the scope.

  140. Question 140Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

    An auditor must sample despatch records held at three depots that differ greatly in volume and process. Which approach gives the most useful coverage?

    1. Take one simple random sample from the combined population of all three depots
    2. Stratify the population by depot and sample from each stratum Correct answer.
    3. Ask each depot manager to select one file for the auditor to review
    4. Sample only the depot that handles the highest number of dispatches

    Explanation

    Stratification splits a heterogeneous population into more uniform groups and samples from each, so every depot's process is represented in the evidence. A single combined sample could be dominated by the largest depot and leave smaller ones untested.

  141. Question 141Identifying findings, grading nonconformities and evaluating objective evidence

    Which of the following best describes objective evidence in a management system audit?

    1. A summary of the impressions the auditors formed during the opening meeting
    2. The auditee's written assurance that the process concerned is fully under control
    3. The audit team's collective professional opinion of how well the management system is performing
    4. Verifiable information based on facts obtained through observation, measurement or test Correct answer.

    Explanation

    Objective evidence must be verifiable, meaning another competent person examining the same records, observations or measurements would reach the same conclusion. It is derived from facts, not from belief, assurance or impression. Opinions and unverified statements become findings only when supported by such evidence.

  142. Question 142Identifying findings, grading nonconformities and evaluating objective evidence

    In audit terminology, a nonconformity is best defined as:

    1. A failure to fulfil a requirement Correct answer.
    2. A departure from the agreed audit timetable
    3. A suggestion for improving the efficiency of a process
    4. A weakness that has not yet caused a problem but may do so in future

    Explanation

    A nonconformity is the non-fulfilment of a requirement, where the requirement comes from the audit criteria such as ISO 9001, the organisation's own procedures or customer and regulatory requirements. It must be tied to a specific requirement, not merely to a perceived weakness.

  143. Question 143Identifying findings, grading nonconformities and evaluating objective evidence

    An auditor notes that a process conforms to requirements but depends entirely on one trained operator, creating risk if that person leaves. How should this be recorded?

    1. A major nonconformity, because the process is not robust
    2. A minor nonconformity, because a risk has been identified
    3. No comment, because staffing matters fall outside the audit scope
    4. An observation, because the applicable requirement is currently being met Correct answer.

    Explanation

    A nonconformity requires a failure to fulfil a requirement; here no requirement is breached, so the condition cannot be graded as a nonconformity. A statement of fact that highlights risk or potential improvement is recorded as an observation. Observations help the auditee improve without implying nonconformity.

  144. Question 144Identifying findings, grading nonconformities and evaluating objective evidence

    Which of the following is an acceptable source of audit criteria for a QMS audit?

    1. The auditee's log of customer complaints
    2. ISO 9001 together with the organisation's own documented procedures Correct answer.
    3. The auditor's own experience of industry best practice
    4. The organisation's rolling sales forecast

    Explanation

    Audit criteria are the set of requirements against which conformity is judged, typically the standard, applicable regulations and the organisation's own documented information. Findings must be written against one of those requirements. Complaints, forecasts and personal practice may be evidence or context, but they are not criteria.

  145. Question 145Identifying findings, grading nonconformities and evaluating objective evidence

    A complete nonconformity statement must contain which three elements?

    1. The audit plan reference, the audit duration and the auditor's name
    2. The root cause, the correction taken and the responsible person
    3. The requirement, the objective evidence and the deficiency found Correct answer.
    4. The proposed corrective action and its planned completion date

    Explanation

    A defensible nonconformity states the requirement that applies, the objective evidence the auditor actually examined, and the specific deficiency that shows the requirement was not met. Root cause, correction and corrective action belong to the auditee's response, not to the finding itself.

  146. Question 146Identifying findings, grading nonconformities and evaluating objective evidence

    Who determines whether a nonconformity is graded as major or minor?

    1. The certification body's technical reviewer, after the report is submitted
    2. The client who commissioned the audit
    3. The auditee's management representative, in consultation with the process owner
    4. The auditor or audit team, applying defined grading criteria Correct answer.

    Explanation

    Grading is an audit judgement made by the auditor or audit team against criteria defined in the certification body's procedures. The auditee may challenge the finding and the reviewer may check consistency, but neither decides the grade in the first instance.

  147. Question 147Identifying findings, grading nonconformities and evaluating objective evidence

    A minor nonconformity is best described as one that:

    1. Always requires an additional on-site audit before certification can proceed
    2. Has no effect on the management system and may be left unrecorded
    3. Indicates a total breakdown of a required system or process
    4. Represents an isolated lapse that does not indicate a systemic failure Correct answer.

    Explanation

    A minor nonconformity is a single or isolated lapse against a requirement that does not indicate a systemic breakdown and does not by itself undermine the effectiveness of the management system. It must still be recorded and corrected. Whether follow-up is on-site or off-site depends on the certification body's procedures.

  148. Question 148Identifying findings, grading nonconformities and evaluating objective evidence

    When writing a nonconformity, the auditor should ensure the statement is:

    1. Written in general terms so that it cannot be contested by the auditee
    2. Factual, specific and traceable to the objective evidence gathered Correct answer.
    3. Combined with a recommended solution to the problem
    4. Attributed to the named employee who made the error

    Explanation

    Findings must be precise enough for the auditee to investigate and act, and specific enough for a third party to re-check against the same evidence. Vague wording and personal blame are both inappropriate. Solutions remain the auditee's responsibility.

  149. Question 149Identifying findings, grading nonconformities and evaluating objective evidence

    An auditor finds that no internal audits have been carried out anywhere in the organisation for the last 18 months. How should this be graded?

    1. No finding, because ISO 9001 does not prescribe how often internal audits must occur
    2. Major nonconformity, because an entire requirement of the management system has not been implemented Correct answer.
    3. Observation, because the audit schedule may be resourced at a later date
    4. Minor nonconformity, because no customer complaint has resulted from the omission

    Explanation

    ISO 9001 requires internal audits at planned intervals, with the interval set by the organisation itself. A complete absence of internal audits across the system means a whole requirement has not been implemented, which is the classic basis for a major nonconformity. Absence of complaints does not mitigate the failure.

  150. Question 150Identifying findings, grading nonconformities and evaluating objective evidence

    Which of the following is the best-written nonconformity statement?

    1. Clause 8.4.1 requires defined supplier evaluation criteria; the approved supplier list dated 3 March contains four suppliers added with no recorded evaluation. Correct answer.
    2. The purchasing process is weak and needs to be improved.
    3. Suppliers should be evaluated periodically, and this was not adequately demonstrated during the audit.
    4. Purchase orders 123 and 124 were unsigned, and the buyer responsible should be retrained.

    Explanation

    A sound statement names the requirement, cites the specific objective evidence and identifies the precise deficiency. Option 1 does all three with traceable detail. It also avoids blame and avoids prescribing the fix.

  151. Question 151Identifying findings, grading nonconformities and evaluating objective evidence

    During the audit the auditee immediately replaces a missing calibration label after the auditor points it out. How should this be recorded?

    1. Close the matter with no record, since the issue was corrected on the spot
    2. Record the nonconformity as identified, noting the containment taken during the audit, and require corrective action Correct answer.
    3. Record an opportunity for improvement, because the instrument was found to be within calibration
    4. Raise a major nonconformity, because calibration control has failed

    Explanation

    Correcting the immediate condition is containment, not corrective action, and does not remove the finding. The auditor records the nonconformity and notes the action taken during the audit so the history is accurate. The auditee must still investigate cause and act to prevent recurrence.

  152. Question 152Identifying findings, grading nonconformities and evaluating objective evidence

    An auditee states that all operators are trained, but no training records can be produced. What should the auditor do first?

    1. Abandon that audit trail and move on to the next process
    2. Accept the statement, because the respondent is the process owner
    3. Raise a nonconformity immediately, because records are evidently missing
    4. Seek further evidence, such as other records or observing the work, before concluding Correct answer.

    Explanation

    An assertion from an interviewee is a lead, not a conclusion. The auditor should corroborate it before deciding whether a requirement has actually failed. Only when the evidence shows the requirement is unmet should a nonconformity be written.

  153. Question 153Identifying findings, grading nonconformities and evaluating objective evidence

    Which situation is most appropriately recorded as an improvement opportunity rather than a nonconformity?

    1. Calibration records for a device used in final inspection cannot be located
    2. A required management review was not held during the past year
    3. The organisation has no documented criteria for supplier evaluation, contrary to clause 8.4.1
    4. A procedure meets all requirements but duplicates data entry, adding avoidable delay Correct answer.

    Explanation

    An improvement opportunity addresses effectiveness or efficiency where the requirement is already satisfied. No requirement is breached in the duplicated data entry case. The other situations each involve a specific requirement that has not been met.

  154. Question 154Identifying findings, grading nonconformities and evaluating objective evidence

    An auditor's working note reads: 'The production manager said the process was under control.' What is the principal weakness of this as objective evidence?

    1. It was not countersigned by the auditee
    2. It does not cite a clause number of ISO 9001
    3. It states an unverified assertion rather than a fact the auditor confirmed Correct answer.
    4. It is not written in the past tense

    Explanation

    Objective evidence must be verifiable fact, and a verbal assurance is an assertion until it is corroborated by records, observation or measurement. The auditor should record what was seen, read or measured, and note what was said only as supporting context.

  155. Question 155Identifying findings, grading nonconformities and evaluating objective evidence

    The same minor lapse is found in three of five departments sampled, and all instances trace to a single uncontrolled form. How should this be graded?

    1. Observation, because the form is still being used successfully
    2. Minor, because each individual instance is small in itself
    3. Major, because the findings indicate a systemic breakdown of document control Correct answer.
    4. Minor, but recorded separately in each department so the pattern is visible

    Explanation

    Grading reflects significance and pattern, not the size of individual instances. When multiple occurrences share one systemic cause, the requirement is not being effectively controlled across the system. Recording the instances separately obscures the systemic nature of the failure.

  156. Question 156Identifying findings, grading nonconformities and evaluating objective evidence

    Why must a nonconformity statement cite the specific requirement that was not met?

    1. Because the auditee otherwise cannot appeal against the finding
    2. Because clause references make the audit report appear more thorough
    3. Because the auditee cannot otherwise know what has to be corrected and corrective action cannot be targeted Correct answer.
    4. Because ISO 19011 prohibits quoting clause numbers in findings

    Explanation

    The requirement is the yardstick against which the deficiency is judged and it defines what the auditee must put right. Without it the finding is a matter of opinion and cannot be effectively investigated. Citing the requirement also makes the finding auditable by a third party.

  157. Question 157Identifying findings, grading nonconformities and evaluating objective evidence

    For every nonconformity raised, the auditor's records should include:

    1. The estimated financial cost of the failure
    2. The auditor's suggested corrective action
    3. The names of the individuals who made the errors
    4. The evidence examined and where it can be located Correct answer.

    Explanation

    The audit trail must allow the finding to be reconstructed and re-verified, so the evidence and its location are essential. This supports consistency, technical review and any later dispute. Attributing blame, costing the failure or designing the fix is outside the auditor's role.

  158. Question 158Identifying findings, grading nonconformities and evaluating objective evidence

    The auditee disputes a nonconformity during the closing meeting. What should the audit team leader do?

    1. Re-explain the evidence and criterion, record the disagreement, and retain the finding if the evidence stands Correct answer.
    2. Escalate the grade from minor to major in order to settle the dispute
    3. Withdraw the finding in order to preserve a constructive relationship
    4. Immediately refer the matter to the certification body's complaints procedure

    Explanation

    Disagreement is resolved by reference to evidence and criteria, not by concession or escalation. The finding is retained where the evidence supports it, and the auditee's view is recorded so the reviewer and certification decision-maker see both positions. Formal complaints processes are for unresolved disputes after the audit.

  159. Question 159Identifying findings, grading nonconformities and evaluating objective evidence

    From 400 purchase orders the auditor samples 20 and finds two without the required approval. What is the correct approach?

    1. Keep enlarging the sample until a set with no exceptions is obtained
    2. Extrapolate that 10 per cent of all orders are unapproved and grade the finding as major
    3. Ignore the two exceptions because the sample is not statistically valid
    4. Investigate whether an approval system exists and grade according to the significance and pattern of what was found Correct answer.

    Explanation

    Sampling results are a starting point for judging whether the control operates as required. The auditor follows up to establish whether the exceptions reflect an isolated lapse or a systemic weakness, then grades accordingly. Simple extrapolation and selective resampling both misrepresent the evidence.

  160. Question 160Identifying findings, grading nonconformities and evaluating objective evidence

    Which statement is a valid, objectively evidenced audit finding?

    1. Three of the twelve inspection records sampled lacked the inspector's signature, contrary to procedure QP-07 clause 4.2. Correct answer.
    2. The auditor believes the process could be leaner.
    3. The quality culture in the warehouse is poor.
    4. Staff appear demotivated about the new system.

    Explanation

    A valid finding states a requirement, the evidence examined and the specific deficiency, all of which can be re-checked by another person. Culture, motivation and leanness are impressions that are not verifiable against criteria in this form. They may be recorded as observations if relevant.

  161. Question 161Identifying findings, grading nonconformities and evaluating objective evidence

    The process owner says all lots are inspected, the inspection records show gaps, and the auditor observes inspection taking place during the audit. Which conclusion is best supported?

    1. The process owner's statement outweighs the records because that person owns the process
    2. The observation of inspection proves the process conforms, so no finding should be raised
    3. The records are incomplete, which is a nonconformity against the requirement for documented information evidencing conformity of the process Correct answer.
    4. The conflict should be left to the auditee to resolve before any finding is recorded

    Explanation

    Where sources conflict, the auditor weighs them against the requirement rather than choosing the most convenient one. Observing inspection confirms the activity happens but does not evidence that every lot was inspected, so the missing records are the finding. The requirement to retain documented information as evidence is breached, irrespective of the verbal assurance.

  162. Question 162Identifying findings, grading nonconformities and evaluating objective evidence

    Which circumstance most strongly justifies grading a nonconformity as major rather than minor?

    1. The nonconformity was raised late on the final day of the audit
    2. The nonconformity was identified by a technical expert rather than the lead auditor
    3. The failure affects a requirement whose absence would render the management system ineffective for the scope of certification Correct answer.
    4. The auditee has not previously been audited by this certification body

    Explanation

    Major grading turns on the significance of the failure: whether a required process or the system as a whole fails to operate, or whether the failure creates serious doubt about the system's effectiveness for the scope concerned. Timing, audit history and the identity of the auditor have no bearing on significance.

  163. Question 163Identifying findings, grading nonconformities and evaluating objective evidence

    An auditor writes: 'The calibration register was not updated; the calibration clerk must be retrained and a new software module installed.' What is the principal defect in this statement?

    1. It fails to identify the department concerned
    2. It combines findings relating to two different clauses of ISO 9001
    3. It does not state the date on which the audit took place
    4. It prescribes correction and corrective action, which are the auditee's responsibility, and it does not state the requirement breached Correct answer.

    Explanation

    A finding must state the requirement and the deficiency; deciding on training or software is the auditee's corrective action, reached through its own cause analysis. Prescribing solutions pre-empts that analysis and may not address the true cause. The auditor reports the nonconformity and leaves the response to the organisation.

  164. Question 164Identifying findings, grading nonconformities and evaluating objective evidence

    A minor nonconformity from the previous audit is found again, unchanged, after the auditee's corrective action was accepted as complete. How should the audit team treat it?

    1. Raise it again as minor, because the condition itself is unchanged in nature
    2. Consider grading it as major, because the corrective action process has failed to eliminate the cause Correct answer.
    3. Raise it only if the auditee's corrective action plan has been formally closed by the client
    4. Record it as an observation, since it has already been reported once

    Explanation

    Grading reflects the significance of what the evidence shows. If the same condition persists after corrective action was accepted, the failure lies with the corrective action process, which undermines the system's ability to improve, and major grading may be justified. Repeating the finding as minor or as an observation would leave the systemic failure unaddressed.

  165. Question 165Audit reporting, closing meeting, follow-up and corrective action verification

    What is the primary purpose of the closing meeting in a QMS audit?

    1. To collect additional objective evidence from those attending
    2. To finalize the audit team's competence requirements
    3. To present the audit findings and conclusions to the auditee Correct answer.
    4. To negotiate the audit criteria with the auditee

    Explanation

    The closing meeting exists so that findings and conclusions are presented and understood by the auditee, and so that time frames for corrective action and any follow-up are agreed. Audit criteria and team competence are settled before the audit itself begins.

  166. Question 166Audit reporting, closing meeting, follow-up and corrective action verification

    Who is responsible for chairing the closing meeting?

    1. The certification decision maker
    2. The auditee's senior manager
    3. The client's quality manager
    4. The audit team leader Correct answer.

    Explanation

    ISO 19011 gives the audit team leader responsibility for presenting findings and conclusions, which normally includes chairing the closing meeting. Other attendees participate but do not run the meeting.

  167. Question 167Audit reporting, closing meeting, follow-up and corrective action verification

    How should the audit report and the information it contains be treated?

    1. They belong to the client and remain confidential Correct answer.
    2. They may be published freely by the auditor for training
    3. They must be sent to the accreditation body
    4. They become the property of the audit team

    Explanation

    The audit report remains the property of the client and is treated as confidential by the audit team and programme. Disclosure to third parties requires the client's permission or a legal obligation.

  168. Question 168Audit reporting, closing meeting, follow-up and corrective action verification

    When should the audit report be issued?

    1. Only after all corrective actions have been verified
    2. At the discretion of the audit team leader
    3. Before the closing meeting so attendees can read it
    4. Within the time period agreed with the client Correct answer.

    Explanation

    ISO 19011 expects the report to be issued within a time period agreed with the client. Verification of corrective action is a separate follow-up activity and does not normally delay the report itself.

  169. Question 169Audit reporting, closing meeting, follow-up and corrective action verification

    In audit reporting, what does the term 'nonconformity' mean?

    1. The non-fulfilment of a requirement Correct answer.
    2. Any finding that the auditor considers important
    3. A deviation from the audit plan only
    4. A suggestion for improving the process

    Explanation

    A nonconformity is defined as the non-fulfilment of a requirement, whether that requirement comes from the standard, the organisation's own documentation or a customer. Suggestions and observations do not meet that definition.

  170. Question 170Audit reporting, closing meeting, follow-up and corrective action verification

    Why is a follow-up audit carried out after nonconformities have been reported?

    1. To repeat the whole audit so that the findings can be confirmed
    2. To re-score the auditee's supplier performance
    3. To identify new opportunities for improvement
    4. To verify that corrective actions were taken and are effective Correct answer.

    Explanation

    Follow-up focuses on the corrective actions arising from reported nonconformities: whether they were implemented and whether the underlying problem has been resolved. It is targeted at those findings rather than a repeat of the entire audit.

  171. Question 171Audit reporting, closing meeting, follow-up and corrective action verification

    Which item is a required element of an audit report?

    1. The audit objectives, scope and criteria Correct answer.
    2. The commercial terms of the audit contract
    3. Every document reviewed during the audit
    4. The personal contact details of each interviewee

    Explanation

    A report must allow the reader to understand what was audited and against what rules, so objectives, scope and criteria are essential contents along with dates, team, findings and conclusions. It summarises rather than reproducing every record seen.

  172. Question 172Audit reporting, closing meeting, follow-up and corrective action verification

    A planned site visit has to be cancelled part-way through an audit. What should the audit team leader do?

    1. Remove the affected clause from the audit scope
    2. Record the deviation and its effect on audit conclusions Correct answer.
    3. Conclude that the process is conforming
    4. Extend the audit by one day without informing the client

    Explanation

    Any significant deviation from the audit plan, and its impact on the reliability of the conclusions, must be reported. This lets the client judge how much confidence to place in the outcome.

  173. Question 173Audit reporting, closing meeting, follow-up and corrective action verification

    The auditee quarantines a batch of nonconforming parts and then investigates why they were produced. What term describes the quarantine?

    1. A follow-up audit
    2. A corrective action
    3. A correction Correct answer.
    4. A preventive action

    Explanation

    A correction eliminates or contains a detected nonconformity, as with segregation or rework. Investigating and removing the cause is the corrective action that follows it.

  174. Question 174Audit reporting, closing meeting, follow-up and corrective action verification

    An auditee proposes only to retrain an operator after a nonconformity caused by an unclear work instruction. What is the main weakness of this response?

    1. It treats the symptom rather than the root cause Correct answer.
    2. It requires a follow-up audit before implementation
    3. It should have been agreed at the opening meeting
    4. It is too expensive for the process involved

    Explanation

    Corrective action must deal with the cause. If the instruction itself is ambiguous, retraining leaves the defective instruction in place and the problem will recur.

  175. Question 175Audit reporting, closing meeting, follow-up and corrective action verification

    When may corrective action be verified without carrying out an on-site visit?

    1. When the auditee requests it in order to save costs
    2. When documentary evidence is enough to confirm implementation Correct answer.
    3. Never; verification must always be carried out on site
    4. Only when the nonconformity was originally raised as an observation

    Explanation

    Verification can be done by desk review where objective evidence, such as revised documents, records or photographs, is sufficient to confirm that the action was taken and works. Where the evidence cannot demonstrate effectiveness, an on-site check is needed.

  176. Question 176Audit reporting, closing meeting, follow-up and corrective action verification

    The auditee disagrees with a nonconformity during the closing meeting. What should the audit team leader do?

    1. Close the meeting and refuse to issue a report
    2. Delete the finding in order to keep the meeting constructive
    3. Record the disagreement as a new nonconformity
    4. Record the disagreement and the views of both parties Correct answer.

    Explanation

    Divergent opinions on findings or conclusions are recorded alongside the audit results, so the report reflects both positions. The finding is only changed if the auditee presents evidence that it is not valid.

  177. Question 177Audit reporting, closing meeting, follow-up and corrective action verification

    Which elements make a well-written nonconformity statement?

    1. The root cause, the correction, and the cost
    2. The requirement, the evidence and the failure Correct answer.
    3. The auditor's name, the auditee's name, and the date of the audit
    4. The clause, the risk score, and the owner

    Explanation

    A sound statement identifies the requirement that applies, the objective evidence found, and how that evidence fails to meet the requirement. Root cause and correction are the auditee's subsequent analysis, not part of the finding.

  178. Question 178Audit reporting, closing meeting, follow-up and corrective action verification

    Which statement best describes the 'audit conclusions' section of a report?

    1. It summarises how findings affect the audit objectives Correct answer.
    2. It repeats the nonconformities word for word
    3. It lists every piece of objective evidence collected during the audit
    4. It states the auditee's improvement targets

    Explanation

    Conclusions address the audit objectives, for example whether the management system is effective, and take account of the significance of the findings. They are a judgement, not a restatement of evidence or a list of findings.

  179. Question 179Audit reporting, closing meeting, follow-up and corrective action verification

    After the audit, how should working documents and reports be handled?

    1. Leave all copies and working papers with the auditee
    2. Retain or dispose of them as agreed, in confidence Correct answer.
    3. Publish them on the organisation's internal intranet site
    4. Destroy them before the closing meeting

    Explanation

    Retention and disposal follow the agreement with the client and the audit programme's rules, and confidentiality is maintained throughout. Working papers often contain sensitive information that should not be left with, or circulated within, the auditee.

  180. Question 180Audit reporting, closing meeting, follow-up and corrective action verification

    After the closing meeting, the audit team leader notices an additional nonconformity in the notes. What is the correct practice?

    1. Hold the report until the next scheduled audit
    2. Add it straight to the report without informing the auditee
    3. Discuss it with the auditee before deciding to include it Correct answer.
    4. Include it anonymously in the report

    Explanation

    Findings should be presented to the auditee so that the evidence can be confirmed or challenged. A late finding is therefore raised with the auditee before being included in the report.

  181. Question 181Audit reporting, closing meeting, follow-up and corrective action verification

    An auditee has revised a procedure and retrained staff after a nonconformity. What does verification of effectiveness require?

    1. Confirmation that the revised procedure has been formally approved
    2. Confirmation that training records exist for all staff
    3. A signed statement from the process owner
    4. Evidence that the process now meets the requirement consistently Correct answer.

    Explanation

    Effectiveness means the corrective action actually prevents recurrence, which is shown by the process consistently meeting the requirement over time. Documents, signatures and training records are inputs that may support verification but do not by themselves prove the outcome.

  182. Question 182Audit reporting, closing meeting, follow-up and corrective action verification

    A follow-up audit shows that corrective action was implemented but the nonconformity has recurred. What should happen next?

    1. The finding is closed because action was taken
    2. The finding is downgraded to an observation
    3. The case is escalated and further action is required Correct answer.
    4. The follow-up audit is repeated unchanged later

    Explanation

    Recurrence shows the action did not address the cause, so the corrective action is not effective and the finding stays open. The situation is escalated within the audit programme so that further analysis and action are required.

  183. Question 183Audit reporting, closing meeting, follow-up and corrective action verification

    A third-party certification audit identifies a major nonconformity. What is the appropriate reporting outcome?

    1. Certification is granted straight away with the nonconformity noted
    2. The nonconformity is reported only verbally to senior management
    3. The report is withheld until the nonconformity has been fixed
    4. It is reported, and the decision awaits action verification Correct answer.

    Explanation

    The nonconformity is recorded in the report and the certification decision is deferred until correction and corrective action have been verified as acceptable. Withholding the report or granting certification immediately would break the link between evidence and decision.

  184. Question 184Audit reporting, closing meeting, follow-up and corrective action verification

    What is the audit team's role in relation to a certification decision?

    1. The team leader signs the certificate on behalf of the certification body
    2. The team may decide when the auditee is a long-standing client
    3. The team votes on the decision at the closing meeting
    4. The team provides conclusions that support a decision made by others Correct answer.

    Explanation

    The audit team reports findings and conclusions, but the certification decision is taken by a competent, impartial function that reviews the audit inputs. Separating these roles protects impartiality.

  185. Question 185Third-party certification, accreditation oversight and the role of the lead auditor

    Which body is responsible for granting accreditation to a certification body that audits quality management systems?

    1. A long-established certified client organisation
    2. The International Accreditation Forum's central secretariat
    3. The certification body's internal technical review panel
    4. A national accreditation body assessed against ISO/IEC 17011 Correct answer.

    Explanation

    Accreditation is third-party attestation that a certification body is competent, consistent and impartial, and it is granted by an accreditation body that itself operates to ISO/IEC 17011. IAF coordinates accreditation bodies and runs peer evaluation, but it does not accredit certification bodies directly.

  186. Question 186Third-party certification, accreditation oversight and the role of the lead auditor

    Under conventional third-party QMS certification arrangements, for how long does the certification cycle granted by a certification decision normally run before recertification is required?

    1. It continues indefinitely provided surveillance findings are satisfactory
    2. Five years
    3. One year
    4. Three years Correct answer.

    Explanation

    Certification is granted for a defined cycle, normally three years, and recertification is required at the end of it. Surveillance audits within the cycle do not extend the cycle length.

  187. Question 187Third-party certification, accreditation oversight and the role of the lead auditor

    Which arrangement best satisfies ISO/IEC 17021-1 for making the certification decision?

    1. The commercial manager confirms that the contract is still viable
    2. Personnel independent of the audit review the audit inputs and decide Correct answer.
    3. The client's management representative confirms that the findings are accurate
    4. The audit team leader decides alone immediately after the closing meeting

    Explanation

    The certification decision must be taken by competent person(s) who were not part of the audit team, using the audit report and related inputs. This separation of auditing from deciding protects impartiality and ensures the evidence is independently reviewed.

  188. Question 188Third-party certification, accreditation oversight and the role of the lead auditor

    What is the primary role of the International Accreditation Forum (IAF) in relation to QMS certification?

    1. It audits certification bodies on behalf of national governments
    2. It settles individual disputes between certified clients and their customers
    3. It issues ISO 9001 certificates to multinational organisations
    4. It operates multilateral recognition arrangements among accreditation bodies Correct answer.

    Explanation

    IAF is a worldwide association of accreditation bodies that operates multilateral recognition arrangements and peer evaluation, so certificates accredited in one economy are accepted in others. It also publishes mandatory documents that harmonise certification practice.

  189. Question 189Third-party certification, accreditation oversight and the role of the lead auditor

    A certification body operates a three-year certification cycle. What is the minimum expected frequency of surveillance audits?

    1. At least once a calendar year, except in the recertification year Correct answer.
    2. Once every three years, in place of the recertification audit
    3. Twice per year for every certified organisation, without any exception
    4. Only when a complaint is received from a customer

    Explanation

    ISO/IEC 17021-1 requires surveillance audits at least once a calendar year, with the recertification audit replacing surveillance in the final year of the cycle. The first surveillance after initial certification is due within 12 months of the certification decision date.

  190. Question 190Third-party certification, accreditation oversight and the role of the lead auditor

    An audit team includes a technical expert who is not qualified as an auditor. What correctly describes the technical expert's role?

    1. To replace an auditor when the team's competence is insufficient
    2. To conduct the closing meeting and report nonconformities alone
    3. To make the certification decision on technical matters
    4. To advise the audit team without auditing or taking over audit responsibilities Correct answer.

    Explanation

    Technical experts contribute specialist knowledge to the audit team but do not audit and do not carry audit responsibilities. The audit team must still contain sufficient auditor competence to cover the scope, and experts operate under the lead auditor's direction.

  191. Question 191Third-party certification, accreditation oversight and the role of the lead auditor

    A certification body delivered internal auditor training and rewrote the client's process documentation eight months ago. What does ISO/IEC 17021-1 require in this situation?

    1. Certification may proceed if a technical expert reviews the audit report
    2. Certification shall be delayed until two years after the consultancy ended Correct answer.
    3. Certification may proceed provided the consultant is not a member of the audit team
    4. Certification may proceed if the client signs a written waiver accepting the risk

    Explanation

    A certification body shall not certify a management system on which it provided management system consultancy; the restriction lasts at least two years after the consultancy ended. Using different personnel does not remove the threat to impartiality created by the relationship itself.

  192. Question 192Third-party certification, accreditation oversight and the role of the lead auditor

    During a stage 2 audit the team raises a major nonconformity. What must normally happen before certification can be granted?

    1. Correction and corrective action are implemented and verified as effective Correct answer.
    2. The client submits a written promise to address the issue at the next surveillance audit
    3. The certification body issues the certificate with a restriction noted in the scope
    4. The lead auditor downgrades it to a minor nonconformity if the impact is limited

    Explanation

    Where a major nonconformity is identified, certification cannot be granted until the client has implemented correction and corrective action and the certification body has verified their effectiveness. Verification is normally carried out through a follow-up activity such as a special or partial audit.

  193. Question 193Third-party certification, accreditation oversight and the role of the lead auditor

    IAF mandatory documents on audit time permit a reduction from the calculated audit duration. What is the maximum reduction normally allowed?

    1. 30 per cent Correct answer.
    2. 70 per cent
    3. 50 per cent
    4. 10 per cent

    Explanation

    The permitted reduction from the calculated audit time is normally capped at 30 per cent, and any reduction must be justified and recorded. Reductions cannot be combined in a way that takes the total below the cap.

  194. Question 194Third-party certification, accreditation oversight and the role of the lead auditor

    A certified client wants to move its QMS certificate to a different certification body. What is normally required before the receiving body may issue a certificate?

    1. A full recertification audit completed before any transfer is discussed
    2. The accreditation body must approve each individual transfer in writing
    3. A pre-transfer review of the existing certificate and audit records Correct answer.
    4. The client must first withdraw its certificate publicly for six months

    Explanation

    Transfer follows a defined process in which the receiving certification body reviews the existing certificate, the latest audit reports and the status of open nonconformities before planning any activity. A complete recertification is not automatically required, but outstanding issues must be resolved.

  195. Question 195Third-party certification, accreditation oversight and the role of the lead auditor

    A certified client disputes a certification decision made about its organisation. How should the objection be handled?

    1. As a nonconformity, because the client disagrees with the audit evidence
    2. As a withdrawal request, because the decision can no longer be reviewed
    3. As a complaint, because it concerns the certification body's service quality
    4. As an appeal, through a formal process free of discriminatory action Correct answer.

    Explanation

    An objection to a certification decision is an appeal, and the certification body must have a formal appeal process that does not result in discriminatory action against the appellant. Complaints, by contrast, concern the certification body's activities and are handled through a separate process.

  196. Question 196Third-party certification, accreditation oversight and the role of the lead auditor

    Under what circumstance may a certification body conduct a short-notice audit of a certified client?

    1. When the client asks to bring its surveillance audit forward for convenience
    2. When the client's marketing team plans a new product launch
    3. When the certification body wishes to reduce its own travel costs
    4. When a complaint or a significant change indicates the system may be ineffective Correct answer.

    Explanation

    Short-notice audits are justified by events that put confidence in the certification at risk, such as complaints, significant changes or evidence of serious system failure. Certification bodies should inform clients in advance that such audits may occur.

  197. Question 197Third-party certification, accreditation oversight and the role of the lead auditor

    Which condition must normally be met before a certification body may sample sites in a multi-site QMS certification?

    1. All sites carry out similar activities under a common management system Correct answer.
    2. Each site maintains its own separate quality manual
    3. All sites are located within the same country
    4. Each site employs fewer than fifty people

    Explanation

    Multi-site sampling depends on the sites performing similar activities under a central function and a common management system, so that the sample can provide confidence in the whole. Where activities differ substantially, sampling is not appropriate for those sites.

  198. Question 198Third-party certification, accreditation oversight and the role of the lead auditor

    A certification body plans to outsource part of its certification activity. Which activity cannot be outsourced under ISO/IEC 17021-1?

    1. The certification decision Correct answer.
    2. The administration of auditor competence records
    3. The provision of specialist technical advice to audit teams
    4. The conduct of stage 1 readiness reviews

    Explanation

    ISO/IEC 17021-1 prohibits outsourcing of the certification decision, which must remain with the certification body itself. Other activities may be outsourced provided the certification body retains responsibility and controls the arrangements.

  199. Question 199Third-party certification, accreditation oversight and the role of the lead auditor

    When determining audit time, how are part-time and seasonal workers who perform work within the scope of the QMS treated?

    1. They are counted as one person per site regardless of hours worked
    2. They are counted only if they work more than six months per year
    3. They are converted to an equivalent number of full-time personnel Correct answer.
    4. They are excluded because they are not on permanent contracts

    Explanation

    The effective number of personnel includes all personnel involved in the scope, including part-time, temporary, seasonal and subcontracted workers, converted to an equivalent full-time figure on the basis of hours worked. This ensures audit time reflects the real size of the activity.

  200. Question 200Third-party certification, accreditation oversight and the role of the lead auditor

    A client's certificate expires on 30 June. What is required if certification is to continue without a gap?

    1. The certificate is automatically extended by three months
    2. The recertification audit may take place at any time in the following year
    3. The audit is done after expiry and the new certificate is backdated
    4. The recertification audit and decision are completed before the expiry date Correct answer.

    Explanation

    Recertification activities must be planned and completed so that the new certification decision is taken before the current certificate expires. If this is missed, the certificate cannot simply be extended and recertification would need to be treated as an initial certification.

CQI IRCA QMS LA flashcards

32 cards. Read the term and the definition here. The deck at the top of this page is optional.

Seven quality management principles
Customer focus, leadership, engagement of people, process approach, improvement, evidence-based decision making and relationship management - the foundation of ISO 9001:2015.
Documented information
Information required to be controlled and maintained by the organization and the medium on which it is contained; ISO 9001:2015 replaces 'documents' and 'records' with this term.
Clause 6.1 risks and opportunities
Requires the organization to determine risks and opportunities that need to be addressed, plan actions, integrate them into QMS processes and evaluate their effectiveness.
Non-applicable clause 8 requirements
Only requirements of clause 8 may be deemed not applicable; justification must be maintained as documented information and the scope statement must explain it.
Audit definition ISO 19011
A systematic, independent and documented process for obtaining objective evidence and evaluating it objectively to determine the extent to which audit criteria are fulfilled.
Audit programme
Set of arrangements for a set of audits planned for a specific time frame and directed at a specific purpose; managed through establish, implement, monitor, review and improve.
Second-party audit
An external audit performed by or on behalf of a party having an interest in the organization, typically a customer auditing a supplier or a purchasing organization auditing a provider.
Audit criteria
Set of requirements used as a reference against which objective evidence is compared; may include standards, procedures, regulations, contracts and management system requirements.
Auditor competence
Demonstrated ability to apply knowledge and skills; it comprises education, training, experience, audit knowledge and skills, and personal attributes.
Independence in auditing
Auditors must be free from bias and conflict of interest and, wherever practicable, independent of the activity being audited; internal auditors cannot audit their own work.
Lead auditor competence
Additional ability to manage an audit, lead the team, plan and prioritize, communicate with client and auditee, resolve conflict and reach audit conclusions.
Due professional care
Audit principle requiring auditors to exercise care and judgment in accordance with the importance of the task and the confidence placed in them by clients and interested parties.
Audit plan contents
Includes objectives, scope, criteria, dates and locations, expected time, roles, resources, audit methods and sampling; agreed with the client and communicated to the auditee.
Working documents
Checklists, sampling plans, forms and the audit plan used by the audit team; retained until no longer needed and protected for confidentiality.
Documentation review purpose
To determine whether the auditee's documented information conforms to the audit criteria and to identify areas requiring attention and sampling during the audit.
Audit scope
The extent and boundaries of an audit, including locations, organizational units, activities, processes and time period covered, as stated in the audit plan.
Objective evidence
Verifiable data, records or statements of fact pertaining to the audit criteria; evidence is gathered through interviews, observation and review of documents.
Open questions
Questions beginning with what, how, when, where or why that invite explanation and yield richer information than closed questions, which can be leading or narrow.
Opening meeting purpose
To confirm the audit plan, scope and criteria, introduce the team, explain methods, confirm communication, confidentiality and safety arrangements, and agree the closing meeting.
Audit sampling
Examining less than the total population of available information; the sample should be representative and based on risk, and findings may indicate a systemic issue.
Nonconformity definition
Non-fulfilment of a requirement; graded as major or minor by the audit team according to the audit programme's classification rules and the assessed risk.
Major nonconformity
A significant failure such as absence of a required system element, a systemic breakdown, or a lapse that would likely cause the QMS to fail to deliver conforming product.
Minor nonconformity
An isolated lapse or single observed departure from a requirement that is not systemic and does not by itself indicate a breakdown of the management system.
Nonconformity statement content
States the requirement not fulfilled (criterion), the objective evidence observed, and where and when it was found, so the auditee can investigate the cause.
Audit report content
Objectives, scope and criteria, dates and locations, audit team, findings, conclusions and any statement of conformity; issued within the agreed time frame and owned by the client.
Corrective action
Action to eliminate the cause of a nonconformity and prevent recurrence; it is distinct from correction, which only fixes the immediate nonconformity.
Follow-up audit
Verification of the implementation and effectiveness of corrective action, carried out by desk review or on site and sometimes deferred to the next scheduled audit.
Closing meeting purpose
To present findings and conclusions, explain nonconformity grading, agree correction and corrective action timescales, and confirm follow-up arrangements with the auditee.
Stage 1 certification audit
Assesses readiness for stage 2, including documented information, scope, completion of internal audit and management review, and identification of areas of concern.
Surveillance audit frequency
At least once a calendar year after initial certification, except in the recertification year; the certification cycle is typically three years.
Impartiality in certification
Certification bodies shall not provide consultancy and shall manage conflicts of interest; auditors cannot audit organizations they have consulted for within the defined period.
Lead auditor role
Plans and leads the audit, assigns tasks, communicates with the client, controls the audit, determines findings and conclusions, and signs the audit report.

CQI IRCA QMS LA study guide

Quality management fundamentals and ISO 9001 requirements

What ISO 9001:2015 actually demands

ISO 9001:2015 follows the Annex SL high-level structure - clauses 4 to 10: context of the organization, leadership, planning, support, operation, performance evaluation, improvement. It rests on the seven quality management principles: customer focus, leadership, engagement of people, process approach, improvement, evidence-based decision making and relationship management.

Concepts a candidate must hold securely: the standard distinguishes requirements ("shall") from notes and guidance; documented information covers both documents and records; and clause 4.3 allows a requirement to be declared not applicable only when it does not affect the ability to provide conforming products and services - never for convenience.

Traps that appear in questions

  • ISO 9001:2015 does not require a quality manual, a management representative, a written procedure for every clause, or a formal risk register.
  • Risk-based thinking sits in clause 6.1; there is no "preventive action" clause - 10.2 addresses corrective action only.
  • "Process approach" means managing inputs, outputs and interactions, not merely owning procedure documents.
  • Outsourced processes remain the organization's responsibility (8.4).
  • Audit criteria for a certification audit are the standard's requirements plus the organization's own requirements and applicable statutory/regulatory requirements.

Rule of thumb

When a clause says "as applicable" or "as appropriate", the requirement still applies; the phrase relaxes only the form and extent of what is done or documented, never the obligation itself. So "we don't calibrate because we are a service company" fails 7.1.5.2 whenever a measuring resource is used to verify conformity - for example a torque wrench used to confirm a service meets specification.

Audit principles, audit types and the audit programme (ISO 19011)

Definitions and principles

An audit is a systematic, independent and documented process for obtaining objective evidence and evaluating it objectively to determine the extent to which audit criteria are fulfilled. Learn the trio: audit criteria (the requirements used as a reference), audit evidence (records, statements of fact, observations) and audit findings (the result of evaluating evidence against criteria).

ISO 19011:2018 sets out seven principles: integrity, fair presentation, due professional care, confidentiality, independence, evidence-based approach and risk-based approach. Nearly every scenario question can be resolved by testing the answer against one of these.

Types

The classic distinction is by party: first-party (internal), second-party (performed by an interested party, such as a customer or its agent auditing a supplier) and third-party (certification and accreditation). Audits are also classified by object - system, process or product - and may be combined (one audit covering two or more management systems) or joint (two or more auditing organizations auditing one auditee).

The audit programme (ISO 19011 clause 5) is the set of arrangements for a group of audits over a period: objectives, extent, resources, procedures, schedule and monitoring, managed with PDCA and prioritised by risk.

Traps

An internal audit outsourced to a contracted external auditor is still first-party; programme is not the same as an individual audit plan; and independence means freedom from bias and from auditing one's own work, not working outside the organization.

Rule of thumb: ask "who commissioned the audit and who receives the result?" - the answer fixes the party type every time.

Auditor competence, personal attributes and ethical conduct

What competence means

ISO 19011 clause 7 defines competence as the ability to apply knowledge and skills to achieve intended results. It has three strands: personal attributes, knowledge and skills (generic, discipline-specific and sector-specific) and the evaluation that demonstrates them.

Personal attributes expected of an auditor include being ethical, open-minded, diplomatic, observant, perceptive, versatile, tenacious, decisive, self-reliant, acting with fortitude, open to improvement, culturally sensitive and collaborative. Generic knowledge covers audit principles, methods and management system standards; discipline knowledge covers QMS requirements, the process approach, sector practice and applicable legal requirements; skills include interviewing, note-taking, report writing, sampling, planning and using technology.

Competence is developed through a cycle: identify needs, plan, provide (training, coaching, shadowing), evaluate (examination, observation, report review, feedback from the team) and maintain through continuing professional development.

Ethical traps

  • Offering or accepting gifts and hospitality that could influence judgement - decline politely and record the offer.
  • An auditee pressing to soften or withdraw a finding - integrity and fair presentation require the finding to stand on its evidence; escalate to the team leader or client.
  • Disclosing client information, or using audit knowledge for personal advantage - confidentiality.
  • Accepting an assignment to audit your own work or a process you advised on - self-review threat.

Rule of thumb (three-way independence test): do not audit your own work, do not audit work you advised on, and do not take on any interest you would not be comfortable disclosing in the audit report.

Audit planning and preparation (documentation review, audit plan, working documents)

Building the plan

Preparation starts with the audit objectives, scope and criteria agreed with the audit client, followed by risk-based selection of the team and a review of the auditee's documented information to understand processes, interfaces and previous findings. Document review is a preparation activity: it tells the auditor where to look, not what to conclude.

The audit plan (ISO 19011 clause 6.3) typically states objectives, criteria, scope, dates, locations, times and duration, expected participants, audit methods and sampling approach, team roles and resources, reporting and closing arrangements, confidentiality and health and safety arrangements. It is agreed with the client and communicated to the auditee in advance.

Working documents

Checklists, forms, sampling plans and audit-trail notes are aids, not scripts. They are retained and controlled for confidentiality, but they must never limit the audit: where evidence leads somewhere the checklist does not cover, follow the trail. Working documents are not normally distributed beyond the audit team.

Traps

  • Skipping document review and drifting into a clause-by-clause checklist march.
  • Planning without reference to process risk, interfaces, previous nonconformities or complaints.
  • Treating the audit plan as unchangeable - it may be revised if the audit reveals different priorities, with the client and auditee informed.
  • Assuming internal audits should be unannounced; an audit normally requires the auditee's cooperation and notice.

Rule of thumb: allocate time by process risk, not by clause count - more time where there are high-risk processes, many interfaces, legal exposure or repeated past findings.

Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

Opening meeting

The opening meeting confirms the plan, scope, criteria and schedule, introduces the team, explains methods and sampling, sets communication channels, covers confidentiality, health and safety, and makes clear that findings are reviewed as the audit proceeds and confirmed at the closing meeting. It is a short, professional exchange - not a place to begin auditing in detail.

Evidence gathering

Collect evidence by interview, observation and examination of records, then verify it by triangulation: if the same fact is supported by what people say, what you see and what the records show, it is solid. If the three disagree, keep digging.

Interviewing technique: open questions to open a topic (what happens, how do you know), closed questions to confirm, no leading questions. Listen actively, take dated notes of who said what and where the record was seen, and always confirm your understanding of an apparent issue with the process owner before writing it up.

Sampling is unavoidable: choose representative, risk-based samples, explain the sampling approach, and state clearly that an audit samples rather than exhaustively verifies.

Traps

  • Prescribing solutions - that is consultancy and a threat to impartiality; describing an observation is acceptable.
  • Accepting hearsay or "we always do it that way" without verification.
  • Arguing with the auditee; or hiding findings until the closing meeting.
  • Mechanically working through every clause instead of following the trail.

Rule of thumb: never record a finding you cannot trace to evidence you personally verified, and never let a checklist stop you following a trail.

Identifying findings, grading nonconformities and evaluating objective evidence

From evidence to finding

A finding is the result of evaluating objective evidence against audit criteria. It may show conformity, nonconformity or an opportunity for improvement/good practice. A nonconformity is non-fulfilment of a requirement (ISO 9000). Write it in three parts: the requirement (quoted or precisely referenced), the evidence (what was seen, where, when, by whom, which record), and the gap. No opinions, no blame, no solution.

Grading

ISO 9001 and ISO 19011 do not themselves require grading; certification bodies and scheme rules commonly classify as major or minor.

  • Major: a systemic failure, the absence of an effective required process, or a nonconformity likely to result in the management system failing to achieve its intended results or in nonconforming output; a legal breach is typically major.
  • Minor: an isolated lapse that does not indicate a systemic failure.

Traps

  • The myth that "one example means minor" - a single instance can be major where the requirement is entirely unaddressed.
  • Reporting an opportunity for improvement as a nonconformity, or a minor as an observation to keep the peace.
  • Grading on the auditee's reaction or seniority rather than on evidence and risk.
  • Vague findings ("document control is weak") that cannot be verified or closed out.

Rule of thumb: ask two questions - "is the requirement addressed at all?" (no = major) and "if this were repeated, would conforming output still be delivered?" (no = major).

Audit reporting, closing meeting, follow-up and corrective action verification

Closing meeting

The closing meeting presents findings and conclusions to the auditee and client, explains the basis for grading, allows the auditee to ask questions or record disagreement, agrees timescales for corrective action and explains reporting, complaints and appeals routes. It is a presentation of results, not a negotiation - disputed findings stay in the report, with the auditee's view noted where appropriate.

The report

The audit report (ISO 19011 clause 6.5) covers objectives, scope, identification of client, auditee and team, dates and locations, criteria, findings and the evidence supporting them, conclusions on conformity and, where in scope, effectiveness, plus a statement that the audit used sampling and therefore carries uncertainty. Issue it within the agreed timeframe and control its distribution.

Follow-up

Follow-up verifies that the auditee has made the correction (fixing the immediate problem) and implemented corrective action (eliminating the cause) and that the action was effective. ISO 9001 clause 10.2 requires reacting to the nonconformity, evaluating the need to eliminate the cause, implementing action, reviewing effectiveness and updating risks. Verification may be desk-based or on-site; the auditor verifies, the auditee acts.

Traps

  • Confusing correction with corrective action.
  • Closing a nonconformity on a promise ("we will brief the team").
  • The auditor proposing or writing the corrective action.

Rule of thumb: correction fixes the thing, corrective action fixes the cause, verification confirms both worked - and effectiveness needs a record dated after implementation.

Third-party certification, accreditation oversight and the role of the lead auditor

The chain of oversight

International Accreditation Forum (IAF) multilateral arrangements sit above accreditation bodies (ISO/IEC 17011), which assess and accredit certification bodies (ISO/IEC 17021-1), which certify client management systems. Accreditation recognises the competence and impartiality of the certification body; it is not a certificate of the client's products.

Initial certification is two-stage: Stage 1 reviews readiness, documented information, scope and resources; Stage 2 evaluates implementation and effectiveness. Certification runs on a three-year cycle with surveillance audits at least annually and a recertification audit before expiry. Special (short-notice) audits, suspension and withdrawal exist for serious or persistent issues.

Impartiality and the decision

Certification bodies must analyse threats to impartiality - self-interest, self-review, familiarity, intimidation - and must not certify a management system on which they provided consultancy, with a two-year cooling-off period. The certification decision is taken by a competent person or committee not involved in the audit. The lead auditor does not grant certification.

Lead auditor role

Leads and manages the team, allocates tasks, safeguards the plan and schedule, represents the team to client and auditee, chairs opening and closing meetings, ensures findings are agreed within the team (reporting divergent views if consensus fails), and ensures the report is issued.

Traps

"The auditor decides certification" (false); "accreditation certifies the client" (false); "certification guarantees product quality" (false).

Rule of thumb: when a question asks who decides, the answer is the certification body's independent decision-maker - never the lead auditor.

CQI IRCA QMS LA cheat sheet

Quick reference

Quality management fundamentals and ISO 9001 requirements

  • ISO 9001:2015 clause structure: 4 Context of the organization, 5 Leadership, 6 Planning, 7 Support, 8 Operation, 9 Performance evaluation, 10 Improvement.

  • The seven quality management principles are customer focus, leadership, engagement of people, process approach, improvement, evidence-based decision making and relationship management.

  • Clause 6.1 requires the organization to determine risks and opportunities, plan actions to address them, integrate the actions into QMS processes and evaluate their effectiveness; risk-based thinking is not a separate clause.

  • Only requirements in clause 8 may be determined not applicable; the justification must be maintained as documented information and reflected in the scope statement (clause 4.3).

  • 'Documented information' replaces 'documents' and 'records': it is information the organization must control and maintain, and it is required only where the standard specifies it (clause 7.5).

  • Clause 9.2 requires internal audits at planned intervals; clause 9.3 requires management review at planned intervals, with defined inputs and outputs.

  • PDCA maps onto the clause structure: Plan (4, 5, 6, 7), Do (8), Check (9), Act (10); the process approach requires identifying process inputs, outputs, sequence, interaction, controls and performance indicators.

  • There is no mandatory quality manual and no fixed set of documented procedures; the mandatory documented information is limited to what clauses 4.3, 4.4, 5.2, 6.1, 7.5, 8.1, 8.5.1, 9.2 and 9.3 specify.

Quick reference

Audit principles, audit types and the audit programme (ISO 19011)

  • An audit is a systematic, independent and documented process for obtaining objective evidence and evaluating it objectively to determine the extent to which audit criteria are fulfilled.

  • ISO 19011:2018 sets out seven audit principles: integrity, fair presentation, due professional care, confidentiality, independence, evidence-based approach and risk-based approach.

  • Audit types by party: first-party (internal audit by or for the organization itself), second-party (audit by a party with an interest, e.g. customer auditing a supplier) and third-party (independent certification or accreditation audit).

  • An audit programme is a set of arrangements for a set of audits planned for a specific time frame and directed at a specific purpose; it is managed by establishing, implementing, monitoring, reviewing and improving.

  • Audit objectives state what the audit is to achieve; audit scope defines the boundaries (locations, units, activities, time period); audit criteria are the requirements used as the reference.

  • Combined audit = one audit against two or more management system standards; joint audit = one audit carried out by two or more auditing organizations.

  • ISO 19011 is guidance only and is not a certification standard; it applies to all organizations and to audits of management systems of any type and size.

  • An audit programme may cover internal audits, supplier audits and certification audits, and its scope and extent should be based on the size, nature and risk of the auditee's activities.

Quick reference

Auditor competence, personal attributes and ethical conduct

  • Auditor competence is the demonstrated ability to apply knowledge and skills; it comprises education, training, experience, audit knowledge and skills, and personal attributes.

  • ISO 19011 personal attributes of an auditor include ethical, open-minded, diplomatic, observant, perceptive, versatile, tenacious, decisive, self-reliant, acting with fortitude, open to improvement, culturally sensitive and collaborative.

  • Lead auditor competence adds the ability to manage an audit and lead a team, plan and prioritize, communicate with client and auditee, prevent and resolve conflict and reach conclusions.

  • Auditors must be independent of the activity being audited wherever practicable, free from bias and conflict of interest, and internal auditors must not audit their own work.

  • Ethical conduct requires integrity, fair presentation, confidentiality and impartiality, and refusal of gifts, hospitality or benefits that could influence audit judgment.

  • Competence is evaluated against defined criteria using methods such as record review, feedback from auditees and peers, interviews, observation and testing of knowledge.

  • Auditors maintain and improve competence through continuing professional development, participation in audits, and reassessment against the competence criteria.

Quick reference

Audit planning and preparation (documentation review, audit plan, working documents)

  • Audit plan content per ISO 19011: audit objectives, scope and criteria, dates and places, expected time and duration, roles and responsibilities, resources, audit methods and sampling.

  • A pre-audit review of documented information determines whether the auditee's documentation meets the audit criteria and identifies areas that need attention and sampling.

  • Working documents include checklists, sampling plans, forms and the audit plan itself; they are retained until no longer needed and handled under confidentiality requirements.

  • Audit criteria are the set of requirements used as a reference against which objective evidence is compared, and may include standards, procedures, regulations and contracts.

  • The audit plan is agreed with the client and communicated to the auditee; the auditee may object to a specific team member on grounds of conflict of interest, and the objection is resolved by the lead auditor and client.

  • Audit sampling is based on a sample of the available information; the sampling plan should be representative and weighted by risk, importance and previous findings.

  • A feasibility review confirms that the audit can be conducted: sufficient information, adequate resources and time, and cooperation from the auditee.

  • The audit plan is a working document and may be adjusted as the audit progresses if the evidence indicates a need.

Quick reference

Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

  • The opening meeting confirms the audit plan, scope and criteria, introduces the audit team, explains the methods, and confirms communication channels, confidentiality, safety arrangements and the closing meeting.

  • Open questions beginning with what, how, when, where or why yield explanation; leading, closed or multiple questions bias or narrow the response.

  • Objective evidence is verifiable data, records or statements of fact relevant to the audit criteria, and evidence sources are interviews, observation of activities and conditions, and review of documents and records.

  • Auditors examine a sample of the available information; a finding based on a sample may indicate a systemic issue and can be escalated in grading.

  • Tracing a process end-to-end (audit trail) verifies the process approach by linking inputs, outputs, controls, responsibilities and performance indicators.

  • Evidence should be corroborated from more than one source before a finding is raised, and unverified statements are recorded as such rather than presented as findings.

  • Evidence records should state what was seen or heard, who was involved, where and when, so that the finding can be substantiated and later verified.

Quick reference

Identifying findings, grading nonconformities and evaluating objective evidence

  • Nonconformity is the non-fulfilment of a requirement; findings are raised against the audit criteria, not against personal preference or general best practice.

  • A major nonconformity typically involves absence of a required system element, a systemic breakdown, or a failure that would likely cause the QMS to fail to deliver conforming product.

  • A minor nonconformity is an isolated or single observed departure from a requirement that is not systemic and does not by itself indicate a breakdown of the management system.

  • Grading rules are set by the audit programme or certification body; the lead auditor determines the final grade with input from the audit team and based on risk.

  • Each nonconformity statement should contain the requirement not fulfilled (criterion), the objective evidence observed, and the location, process and date where it was found.

  • An opportunity for improvement is not a nonconformity and does not require corrective action, although the auditee may choose to act on it.

  • Findings are reviewed with the auditee to confirm factual accuracy; disagreements are recorded and resolved by the lead auditor, not by withdrawing a supported finding.

  • The audit conclusion summarizes conformity and effectiveness of the management system against the audit criteria and is stated in the report.

Quick reference

Audit reporting, closing meeting, follow-up and corrective action verification

  • The audit report covers objectives, scope and criteria, dates and locations, audit team and participants, findings, conclusions and any statement of conformity; it is issued within the agreed time frame.

  • The report is the property of the client and is confidential; distribution is controlled by the client unless the audit programme or certification rules require otherwise.

  • The closing meeting presents findings and conclusions, explains the grading of nonconformities, agrees correction and corrective action timescales and confirms follow-up arrangements.

  • Correction fixes the immediate nonconformity; corrective action eliminates the cause and prevents recurrence, and requires root cause analysis before action is planned.

  • Follow-up verifies both implementation and effectiveness of corrective action and may be by desk review or on-site, or deferred to the next scheduled audit.

  • Verification of effectiveness asks whether the nonconformity has recurred and whether the affected process is now controlled and capable of meeting the requirement.

  • A nonconformity is closed only when objective evidence shows the corrective action was implemented and is effective, not merely when a document has been revised.

  • The report should be factual, clear and complete, and should not attribute blame to individuals; it describes evidence against criteria.

Quick reference

Third-party certification, accreditation oversight and the role of the lead auditor

  • ISO/IEC 17021-1 specifies requirements for bodies providing audit and certification of management systems; ISO 19011 provides guidance on auditing management systems.

  • An accreditation body (for example ANAB, UKAS, CNAS or JAS-ANZ) assesses and accredits certification bodies, and IAF arrangements provide international recognition of accredited certificates.

  • Certification consists of a stage 1 audit (readiness: documented information, scope, internal audit and management review completed) and a stage 2 audit (implementation and effectiveness).

  • Surveillance audits take place at least once a calendar year after initial certification, except in the recertification year; the certification cycle is typically three years.

  • Impartiality rules prohibit a certification body from providing management system consultancy, and an auditor cannot audit an organization they have consulted for within the defined period.

  • The certification decision is made by the certification body on the basis of the audit report; the lead auditor recommends but does not grant, maintain or withdraw certification.

  • Lead auditor responsibilities include planning and leading the audit, assigning tasks, communicating with the client, controlling the audit, determining findings and conclusions and signing the report.

  • Special audits include short-notice and unannounced audits triggered by complaints, significant changes, or consideration of suspension, withdrawal or scope reduction.

CQI IRCA QMS LA key terms

Quality management system (QMS)

A set of interrelated or interacting processes and resources an organization uses to direct and control quality, aimed at meeting customer and applicable requirements and enhancing satisfaction.

Related: Process approach, Documented information
Process approach

Managing activities as interrelated processes that together transform inputs into outputs, so the system's results are understood and controlled as a whole rather than as isolated tasks.

Related: Quality management system (QMS), Risk-based thinking
Risk-based thinking

Considering uncertainty and its potential effects when planning and running the quality management system, so risks and opportunities are identified and addressed rather than reacted to after the event.

Related: Process approach, Context of the organization
Context of the organization

The combination of internal and external issues, and interested parties and their relevant requirements, that can affect how an organization's quality management system is designed and operated.

Related: Risk-based thinking, Quality management system (QMS)
Documented information

Information an organization must control and maintain, including documents needed to support operation of its processes and records that provide evidence that planned results were achieved.

Related: Quality management system (QMS), Document review
Audit

A systematic, independent and documented process for obtaining objective evidence and evaluating it objectively to determine the extent to which audit criteria are fulfilled.

Related: Audit criteria, Audit evidence
Audit criteria

The set of requirements, policies, procedures or standards against which audit evidence is compared to decide whether the audited activity conforms and performs as intended.

Related: Audit, Audit scope
Audit programme

Arrangements for one or more audits planned for a specific period, covering schedule, resources and activities, and typically managed to improve the organization's audit performance over time.

Related: Audit plan, Audit
Audit objectives

The stated purpose of a single audit, such as determining conformity, evaluating effectiveness or identifying improvement opportunities, which drives the audit scope, criteria and evidence needed.

Related: Audit scope, Audit plan
Audit scope

The extent and boundaries of an audit, including the organizational units, locations, processes, functions and period of time covered, agreed with the auditee before the audit begins.

Related: Audit objectives, Audit plan
Third-party audit

An audit performed by an external organization that is independent of both the auditee and its customer, typically to certify conformity with a standard such as ISO 9001.

Related: Certification body, Accreditation body
Competence

The ability to apply knowledge, skills and demonstrated behaviour to achieve intended results, including the education, training and experience needed to perform audit tasks effectively.

Related: Personal attributes, Lead auditor
Objectivity and impartiality

Basing judgements only on the evidence found and being free from bias, conflict of interest or pressure that could influence audit conclusions; auditors must remain independent of the activity being audited.

Related: Due professional care, Confidentiality
Confidentiality

The duty to keep information obtained during an audit secure and disclose it only with the auditee's permission or as required by law, protecting both audit evidence and personal or commercial data.

Related: Objectivity and impartiality, Personal attributes
Due professional care

Applying the skill, judgement and diligence that a reasonable auditor would exercise, taking care in evidence gathering and reporting to produce credible, fair and defensible audit conclusions.

Related: Competence, Objectivity and impartiality
Personal attributes

The behavioural qualities expected of an auditor, such as being ethical, open-minded, diplomatic, observant, perceptive, adaptable and tenacious, which support effective communication and sound judgement during audits.

Related: Competence, Confidentiality
Audit plan

A description of the activities, timing, locations, team assignments and resources for a specific audit, prepared to keep the audit focused and achievable within agreed time and scope.

Related: Audit scope, Working documents
Document review

A preparatory examination of the auditee's system documentation, such as policies, process descriptions and records, to understand the system and identify areas needing attention during the audit.

Related: Documented information, Working documents
Working documents

Materials the audit team prepares and uses during the audit, such as checklists, sampling plans, forms and audit notes, which help structure evidence gathering and support findings.

Related: Audit plan, Audit evidence
Opening meeting

A formal meeting at the start of an audit to confirm the audit plan, scope, criteria, methods, communications and confidentiality, and to give the auditee an opportunity to ask questions.

Related: Closing meeting, Audit plan
Audit evidence

Records, statements of fact or other information relevant to the audit criteria that the auditor collects and evaluates; it must be verifiable and sufficient to support findings and conclusions.

Related: Audit criteria, Audit finding
Audit sampling

Selecting a portion of the available information or items and examining it as a basis for drawing conclusions about the whole, used when examining all evidence would be impractical.

Related: Audit evidence, Audit interview
Audit interview

A planned conversation with auditee personnel to gather information and verify evidence; the auditor should ask open questions, listen carefully and confirm understanding of the answers received.

Related: Audit sampling, Audit evidence
Audit finding

The result of evaluating audit evidence against audit criteria, which may indicate conformity or nonconformity, and which is recorded and communicated to the auditee for action.

Related: Major nonconformity, Minor nonconformity
Major nonconformity

A nonconformity that seriously affects the quality management system's ability to achieve intended results or that indicates a systemic failure, typically requiring immediate correction and prompt verification.

Related: Minor nonconformity, Corrective action
Minor nonconformity

A nonconformity that is isolated or does not seriously undermine the effectiveness of the system, but which still requires correction and investigation of cause to prevent recurrence.

Related: Major nonconformity, Corrective action
Opportunity for improvement

An observation on a possible enhancement to the system or its processes that is not a nonconformity; it may be recorded and communicated, but is not binding in the same way as a finding.

Related: Audit finding, Audit report
Closing meeting

A formal meeting at the end of an audit where the audit team presents findings, conclusions and recommendations, explains the basis of grading, and agrees follow-up actions and reporting timelines with the auditee.

Related: Opening meeting, Audit report
Audit report

A documented record of the audit that provides the audit scope, criteria, findings, conclusions including grading of nonconformities, and, where applicable, recommendations and agreed follow-up actions.

Related: Closing meeting, Corrective action
Correction

An action taken to remove a detected nonconformity, such as repair, rework or replacement; it fixes the immediate problem but does not by itself address the underlying cause.

Related: Corrective action, Root cause analysis
Corrective action

Action taken to eliminate the cause of a nonconformity and prevent it from recurring, typically following analysis of root cause and followed by checks that the action was effective.

Related: Correction, Root cause analysis
Root cause analysis

A structured investigation to identify the underlying reason a nonconformity occurred, rather than just its symptoms, so corrective action can target the true cause and prevent recurrence.

Related: Corrective action, Verification of corrective action
Verification of corrective action

The follow-up activity in which the auditor checks that corrective action has been implemented as planned and is effective in preventing recurrence, and records the result for closure of the finding.

Related: Corrective action, Audit report
Lead auditor

The auditor who is responsible for managing the audit, including planning, team direction, communication with the auditee, resolving differences and approving the audit report and its conclusions.

Related: Competence, Certification body
Certification body

An independent organization that audits and certifies management systems against standards such as ISO 9001, operating under accreditation and issuing certificates with a defined scope and validity.

Related: Accreditation body, Third-party audit
Accreditation body

A national or international organization that formally recognizes a certification body as competent to perform specific certification activities, providing oversight through assessment and ongoing surveillance.

Related: Certification body, Third-party audit
Stage 1 audit

The initial phase of a certification audit that reviews the client's documentation and readiness, confirms scope and criteria, and identifies areas of concern to be addressed before stage 2.

Related: Stage 2 audit, Certification body
Stage 2 audit

The main certification audit phase that evaluates implementation and effectiveness of the management system on site, gathering evidence to decide whether certification can be recommended.

Related: Stage 1 audit, Certification body
Surveillance audit

A periodic audit after certification, usually annual, to confirm the certified management system continues to conform and remains effective, and to check that changes are properly managed.

Related: Recertification audit, Certification body
Recertification audit

A full audit carried out before a certificate expires, typically every three years, to decide whether certification should be renewed for a further cycle.

Related: Surveillance audit, Certification body

CQI IRCA QMS LA study plan

8 weeks · About 7 hours per week

Week 1

Quality management fundamentals and ISO 9001 requirements

  • Map every requirement of ISO 9001 clauses 4, 5 and 6 to a one-line plain-language explanation in your own words

  • Explain the seven quality management principles and give one concrete audit-observable example for each

  • Trace the process approach and risk-based thinking through clauses 4.4, 6.1 and 9.1, and describe how an auditor would test each

  • Distinguish documented information that is 'required' from that which is merely useful, using clause 7.5

Your checkpoint

A personal clause-map of clauses 4-6 (approx. 40 entries) with a plain-language paraphrase and one audit evidence idea per requirement

Week 2

Quality management fundamentals and ISO 9001 requirements & Audit principles, audit types and the audit programme (ISO 19011)

  • Map ISO 9001 clauses 7, 8, 9 and 10 to audit evidence sources, including competence records, design and change control, monitoring, internal audit and management review

  • Define the seven audit principles of ISO 19011 and describe how each one changes auditor behaviour in practice

  • Distinguish first-, second- and third-party audits and identify who owns the audit programme in each case

  • Outline how an audit programme is established, monitored and improved (objectives, risks, scheduling, performance evaluation)

Your checkpoint

A completed clause 7-10 evidence matrix plus a one-page summary contrasting audit types and programme responsibilities

Week 3

Audit planning and preparation (documentation review, audit plan, working documents)

  • Convert an audit scope, criteria and objectives into a defensible audit plan covering duration, sampling sites, shifts and resource needs

  • Perform a staged documentation review and record what to verify versus what to accept at face value

  • Build a process-based audit trail that follows inputs, activities, outputs and interfaces rather than clause order

  • Draft working documents: audit checklist questions, sampling notes, evidence log and nonconformity record template

Your checkpoint

A full audit plan plus checklist and evidence-log templates for a realistic 2-day QMS audit of a chosen organisation

Week 4

Conducting the audit: opening meeting, interviewing, sampling and evidence gathering

  • Draft and rehearse an opening meeting agenda that confirms scope, criteria, schedule, confidentiality and escalation routes

  • Practise questioning techniques (open, probing, closed) and demonstrate how to convert a vague answer into verifiable evidence

  • Design a risk-based sampling approach across sites, shifts, processes and records, and justify sample sizes

  • Classify evidence as conforming, nonconforming or inconclusive at the point of collection, citing the exact requirement

Your checkpoint

A recorded 20-minute mock opening meeting plus a role-played interview transcript with four evidence records graded against clause references

Week 5

Identifying findings, grading nonconformities and evaluating objective evidence & Auditor competence, personal attributes and ethical conduct

  • Apply a written nonconformity definition to ten short scenarios and reject findings that rest on opinion rather than objective evidence

  • Write nonconformity statements that separate the requirement, the evidence and the gap, with a correct clause reference

  • Grade findings as major or minor using stated criteria and defend each grading against a challenge

  • Identify the personal attributes and ethical behaviours required of auditors, including independence, confidentiality and handling pressure or gifts

Your checkpoint

A graded nonconformity pack of ten scenarios with clause references, justifications and a written ethical-dilemma response for three cases

Week 6

Audit reporting, closing meeting, follow-up and corrective action verification & Auditor competence, personal attributes and ethical conduct

  • Compile audit conclusions and report content that answers the audit objectives without introducing new findings

  • Plan and lead a closing meeting, including presenting findings, explaining grading rationale and managing disagreement

  • Design a corrective action follow-up process that tests root cause, correction, effectiveness and the agreed verification date

  • Evaluate where auditor judgement could be compromised and state the disclosure or withdrawal action required

Your checkpoint

A complete audit report for the week 4 mock audit plus a closing meeting script and a corrective action verification checklist

Week 7

Third-party certification, accreditation oversight and the role of the lead auditor

  • Describe the third-party certification process from application through stage 1, stage 2, surveillance and recertification

  • Explain the roles of the certification body, accreditation body and the IAF, and how impartiality and competence are safeguarded

  • Distinguish the responsibilities of a lead auditor from those of team members, technical experts, observers and auditees

  • Outline certification decision-making, suspension, withdrawal and transfer processes and the auditor's role in each

Your checkpoint

A process flow of the certification lifecycle annotated with lead auditor responsibilities and a 15-item self-check on accreditation oversight

Week 8

Quality management fundamentals and ISO 9001 requirements & Conducting the audit: opening meeting, interviewing, sampling and evidence gathering & Identifying findings, grading nonconformities and evaluating objective evidence

  • Re-run a timed 90-question mixed-domain practice set and record a score for each domain

  • Re-study only the two lowest-scoring domains and rewrite the associated flashcard sets

  • Deliver a full simulated audit from plan to report within a strict time budget

  • Consolidate all nonconformity-writing and grading errors from weeks 1-7 into a single corrected reference sheet

Your checkpoint

A timed mock exam result sheet by domain plus a final consolidated one-page cheat sheet of clause references, grading criteria and audit process steps

Milestones

Week 2: Can explain any ISO 9001 clause from 4 to 10 and name at least one evidence source for it without notes

Week 4: Can produce a defensible audit plan and conduct a simulated opening meeting and interview with correct evidence capture

Week 6: Can write and correctly grade a nonconformity and explain the full corrective action verification route

Week 8: Score at least 80% on the timed mixed-domain mock exam, with no domain below 70%

CQI IRCA QMS LA exam day

Your checklist

Valid photo ID

Bring a current passport or government-issued photo ID with your signature. The name on the ID must match the name on your course/exam registration exactly - flag any discrepancy (married name, shortened first name) to the provider before exam day.

Joining instructions / admission confirmation

Bring the provider's exam confirmation (printed or on your phone, stored offline). It should state venue address and room, reporting time, exam start time, and whether the exam is paper-based or remotely proctored. [needs_review - venue, format and timings vary by course provider; confirm with the provider].

Two black or blue ballpoint pens, plus pencil, eraser and sharpener

Have a spare pen that you have already test-written with. Some providers require answers in ink and supply their own answer booklets. [needs_review - confirm permitted stationery with the provider, including whether pencil or correction fluid is allowed].

Simple non-smart wristwatch

A plain analogue or digital watch (no smartwatch, no phone) lets you pace yourself against mark allocation. Confirm whether a clock or countdown timer is visible in the room or on the exam platform. [needs_review].

Clarification on reference material

IRCA-certified lead auditor written exams are normally closed-book, so do not assume you may bring ISO 9001:2015, ISO 19011:2018 or your course notes to the desk. [needs_review - ask the provider in writing what, if anything, is permitted: standard text, course workbook, or nothing].

Water bottle and a light snack for afterwards

Hydration and a snack help over a multi-hour sitting. [needs_review - confirm whether drinks/snacks are allowed at the desk or must stay outside the exam room].

Remote-exam kit (only if sitting online)

Laptop with charged battery and charger, working webcam and microphone, stable primary internet plus a backup (mobile hotspot), a quiet private room with a clear desk, and any ID-verification documents the platform requires. Complete the provider's system/identity check and platform rehearsal in advance if offered. [needs_review - platform, room-scan and ID rules are provider-specific].

One-page personal revision sheet (for pre-exam review only)

Distil the ISO 9001:2015 clause structure (4–10), audit principles, auditor competence, audit programme and audit trail, nonconformity grading, and corrective-action follow-up onto a single page. Use it in the final hours, then put it away unless the provider confirms reference material is allowed.

Pre-prepared nonconformity-writing template in your head

Be able to write a nonconformity statement that states the objective evidence observed, the specific requirement not met (with document and clause reference), and the resulting gap. Practise this on 5–10 short scenarios before exam day - it is the highest-yield exam skill.

Accommodations request already submitted

If you need extra time, a separate room, enlarged print, or other adjustments, raise it with the provider well before the exam - typically at booking, not on the day. [needs_review - deadlines and evidence requirements are provider-specific; confirm with the provider].

Travel and backup plan

Confirm journey time, parking or public transport, and build in at least 30 minutes' buffer. For morning exams, check for known road or rail disruption the night before. [needs_review - late-arrival and admission cut-off rules must be confirmed with the provider].

Plan the day

72 hours before

Do one full timed mock paper under exam conditions (no notes, no phone, same time of day as the real exam). Mark it against the model answers and list your three weakest topics - for most candidates these are audit-trail logic, nonconformity wording, or corrective-action follow-up.

72 hours before

Rehearse the core content you are most likely to be asked on: the process approach and PDCA, context of the organisation and interested parties, risk-based thinking, audit objectives/scope/criteria, sampling and evidence, audit programme management, opening and closing meetings, and the audit report structure.

72 hours before

Confirm exam logistics in writing with your provider: venue or platform, start time, ID type accepted, permitted items, break policy, and the pass mark and any section minimums. [needs_review - confirm these with the provider rather than relying on what other candidates tell you].

48 hours before

Write out 10 nonconformity statements from scratch against ISO 9001 clauses 4–10 and check you can name the requirement and the clause without the standard open. Aim for concise, objective, evidence-based wording with no speculation about intent.

24 hours before

Light review only - reread your one-page summary and your mock-paper error list. Do not start a new topic or try to memorise clause text overnight; consolidation beats cramming at this stage.

24 hours before

Pack the bag: ID, confirmation, pens, pencil, eraser, watch, water. For remote exams, run a final platform and hardware check and clear your desk. Set two alarms and confirm your journey or room set-up.

24 hours before

Sleep. Avoid heavy alcohol and late-night revision; a two-hour written paper with long scenario answers rewards a rested working memory more than an extra chapter.

Morning of the exam

Eat a proper meal, arrive at least 30 minutes early (or log in early for a remote exam), have your ID out, and switch your phone off and stow it before entering the room or starting the proctoring session.

First 5 minutes of the paper

Read the instructions and the mark allocation carefully, skim all questions before writing, and budget your time per mark. Note the total marks and divide the available minutes accordingly, holding back 10 minutes at the end for review.

During the exam

Answer every question - a partially correct answer scores more than a blank. Use headed, numbered answers and short paragraphs rather than one dense block; for nonconformities give evidence, requirement and clause; for audit-trail questions, work through policy → procedure → record → interview.

During the exam

Keep an eye on the clock at the halfway point and mid-way through the largest question. If you are stuck, leave space and move on; return only after the rest of the paper is answered.

Final 10 minutes

Check that every question number has an answer, that clause references are plausible, that your handwriting or typed answers are legible, and that your name/registration details are on the paper or answer file. Fix the cheapest errors first (misspelled/misnumbered answers), not the hardest.

Rules to check

  • Bring photo ID that matches your registration name and present it when asked. Refusal or inability to prove identity may result in you not being admitted. [needs_review - confirm the exact ID requirements and failure procedure with your provider].

  • Unless the provider confirms otherwise in writing, treat the paper as closed-book: no notes, textbooks, ISO 9001 text, mobile phones, smartwatches, earpieces or other electronic devices at the desk. Phones must be powered off and stored, not merely silenced. [needs_review - confirm the permitted-items list with your provider].

  • Follow the invigilator's or proctor's instructions exactly, including any room scan, desk-clear, screen-share or identity re-check in a remote sitting. Any detected misconduct (looking at another candidate's paper, signalling, unauthorised material, pasting answers) is handled under the certification body's malpractice procedure. [needs_review - confirm the malpractice policy and consequences with your provider].

  • Breaks are normally restricted once the paper has started, and leaving and re-entering the room may be supervised. Do not assume you can step out freely. [needs_review - confirm the break and comfort-stop policy with your provider].

  • Grades are set against the pass mark determined by the certification scheme, and some providers apply minimum thresholds to individual sections or to the continuous-assessment element as well as to the written paper. Do not assume a strong written paper alone offsets weak continuous assessment. [needs_review - confirm the pass criteria, marking scheme and any section minimums with your provider].

  • Keep the content of the exam confidential. Do not copy, photograph, reconstruct or share exam questions, scenarios or model answers afterwards; doing so is a breach of the certification body's code of conduct and can affect your certificate.

  • Results, certificates and any resit or appeal route are administered by the course provider and certification body, not settled on the day. If you think something went wrong (illness, a defective paper, a technical failure), report it to the invigilator or proctor before you leave and follow it up in writing. [needs_review - confirm the results timeline, resit eligibility and appeal process with your provider].

CQI IRCA QMS LA FAQ

How many CQI IRCA QMS LA practice questions are available?

The practice set has 200 CQI IRCA QMS LA questions. Each one includes the choices, the correct answer, and an explanation, and the set is free to read with no signup.

How many CQI IRCA QMS LA flashcards are available?

The flashcard set has 32 CQI IRCA QMS LA cards. Each card shows the term and its definition.

Which topics does the CQI IRCA QMS LA study material cover?

The CQI IRCA QMS LA study material has 8 sections, including Quality management fundamentals and ISO 9001 requirements, Audit principles, audit types and the audit programme (ISO 19011), and Auditor competence, personal attributes and ethical conduct.

What format facts does the catalog list for the CQI IRCA QMS LA exam?

The catalog lists these item types: multiple choice, short answer / written response, closed book written examination, continuous assessment by the course provider, and practical audit skills assessment for the CQI IRCA QMS LA exam.