Certified Arborist Practice Test

ISA Certified Arborist

Certified Arborist overview

  • 199 practice questions
  • 32 flashcards
  • 8 study guide topics
  • 39 key terms

What you'll study

  • Tree Biology and Identification12.5%
  • Soil and Water Management12.5%
  • Tree Nutrition and Fertilization12.5%
  • Tree Installation and Establishment12.5%
  • Pruning and Tree Support Systems12.5%
  • Diagnosis and Plant Health Care12.5%
  • Tree Risk Assessment and Management12.5%
  • Safe Work Practices and Urban Forestry12.5%

The ISA Certified Arborist credential is a professional certification administered by the International Society of Arboriculture. ISA describes its credentials as a way to help consumers identify qualified, knowledgeable tree care professionals - which is why the designation is commonly referenced in hiring, contracting, and municipal tree care specifications. Candidates are typically working arborists, climbers, plant health care technicians, municipal foresters, and consultants who want an externally recognized benchmark of knowledge rather than an employer-specific title.

The exam is multiple choice and samples the breadth of arboriculture practice: tree biology and identification, soil and water management, tree nutrition and fertilization, installation and establishment, pruning and tree support systems, diagnosis and plant health care, tree risk assessment and management, and safe work practices including urban forestry. ISA offers two delivery routes for its certification exams: paper-based exams offered by a chapter or affiliated organization, or computer-based exams administered at a Pearson VUE testing facility.

Preparation works best as a combination of structured review and field application - reading a broad arboriculture reference, working systematically through each domain, and practicing diagnosis, pruning, and risk evaluation on real trees. Once certified, holders maintain the credential by earning Continuing Education Units, which ISA notes can be earned through a variety of continuing education and training opportunities.

This page is independent study material and is not affiliated with or endorsed by ISA. Always confirm current exam logistics directly with ISA before scheduling.

Common mistakes

Answering identification items by matching a familiar common name to a vague visual memory, instead of narrowing the plant by structural characters (leaf arrangement, simple vs. compound, bud and twig features, bark, fruit).

Study time gets spent memorizing regional 'top 50 species' lists and photo galleries; the exam instead describes morphology in words and expects you to eliminate candidates by opposite vs. alternate leaves, naked vs. scaled buds, and so on.

What to do instead

Build a one-page matrix for the ~40 genera you are likely to see (leaf arrangement, leaf type, margin, bud type, fruit, bark) and practice by keying fresh twigs and winter twigs from names you do not already know.

Selecting answers that say a tree 'heals' a wound or that a wound dressing/sealant prevents decay.

Everyday language ('the tree healed over the cut') directly contradicts the compartmentalization model that the exam tests, and the intuitive appeal of paint/Sealant is strong.

What to do instead

Learn CODIT explicitly: the four walls, boundary and barrier zones, and the fact that trees compartmentalize rather than heal; commit to memory that wound dressings do not prevent decay and can interfere with normal wound responses.

Treating soil texture and soil structure as interchangeable, and picking 'structure' when the stem describes particle-size proportions (percent sand, silt, clay).

Both are introduced in the same chapter and both get described loosely as 'how the soil is put together,' so the terms blur under exam pressure.

What to do instead

Fix the definitions: texture = proportions of sand/silt/clay and is essentially fixed on a management timescale; structure = arrangement of particles into aggregates/peds and is altered by compaction, tillage, organic matter, and root activity. Drill with short soil descriptions and classify each as texture or structure.

Recommending shallow, frequent irrigation for established trees, or assuming a newly transplanted tree will draw water from the surrounding native soil.

Turf and nursery watering habits carry over, and the root-ball/backfill interface (texture difference restricting water movement) is counterintuitive.

What to do instead

Learn that established tree roots are concentrated in the upper ~12-18 in but extend far beyond the dripline, so deep infrequent soakings beat daily sprinkling; and that new transplants must be watered at the root ball itself, with the root ball checked for moisture even when surrounding soil is wet.

Prescribing nitrogen fertilizer as a default response to any stress symptom, and choosing soil-applied iron sulfate to correct chlorosis on a high-pH soil.

Nitrogen is the familiar 'plant food,' and iron chlorosis looks exactly like a nutrient deficiency, so the cheapest soil-applied iron product feels correct.

What to do instead

Learn the pH-availability interaction: at high pH, Fe, Mn, and Zn are insoluble, so chelated iron (EDDHA) or foliar/trunk-applied material is used and the pH itself is addressed. Also internalize that fertilization does not correct compaction, drought, poor planting depth, or root injury.

Choosing 'amend the backfill with compost' or 'plant slightly deep to reach moisture' on installation items.

Long-standing horticultural folklore plus the instinct that deeper and richer must be safer and better for a young tree.

What to do instead

Learn the current standard as a checklist: native soil backfill (no amendment in the backfill), root flare at or slightly above grade, wide shallow planting hole, remove container/wire/burlap and any circling roots, and 2-4 in of mulch pulled back from the trunk. Rehearse the checklist until it is automatic.

Selecting answers that remove 30-50% of the live crown in one season, that call for flush cuts, or that accept topping as a crown-reduction method.

'Percent of crown' gets confused between height removed and live tissue removed, flush cuts look tidy, and topping is still common in the field.

What to do instead

Learn the numeric standards and the anatomy: no more than about 25% of live crown in a single season on mature trees; cuts made outside the branch bark ridge and collar; reduction cuts to laterals at least one-third the diameter of the removed limb; topping unacceptable and explained by the resulting sprout regrowth and decay.

Naming a pathogen or insect from a single leaf spot or dieback symptom without first checking distribution pattern, host range, and whether the organism is a primary or a secondary agent.

Symptom lists invite one-to-one matching, and biotic causes are more memorable than abiotic ones, so the abiotic/biotic split gets skipped entirely.

What to do instead

Force the sequence on every diagnosis item: uniform vs. random distribution, one species vs. many, pattern following site/roots/wounds/one side of the plant, signs vs. symptoms, and the disease triangle. Eliminate abiotic causes before naming an organism.

Labeling a tree a 'hazard' and stopping there, or assigning a risk rating without identifying a specific target and without separating likelihood of failure from overall risk.

'Hazard tree' is common field shorthand, and matrix-style answers reward picking a strong-sounding word like 'high' without doing the two-part reasoning.

What to do instead

Practice the full expression every time: likelihood of failure x likelihood of impact x consequence, with the target named. A defect with no target is not a risk. Also keep the assessment level (limited visual, basic, advanced) matched to what the question describes.

Guessing ANSI Z133 electrical clearance distances, fall-protection triggers, and PPE requirements instead of recalling the specific thresholds by voltage class and task.

The numbers are numerous, voltage-dependent, and rarely used day to day by arborists who are not doing line-clearance work, so they get approximated from memory.

What to do instead

Memorize the structure of the minimum-approach-distance table by voltage class, the rule that all lines are treated as energized, and the triggers for fall protection, chain-saw use aloft, aerial-lift operation, and required PPE; drill these with flashcards until the values are exact rather than approximate.

Exam requirements can change. Confirm current details with the exam provider.

Certified Arborist practice

199 questions. Each one lists the choices, the correct answer, and an explanation. With JavaScript, this list opens one question at a time. The checker at the top of this page saves progress in this browser when it is available.

  1. Question 1Tree Biology and Identification

    In which organelle of a leaf cell does photosynthesis take place?

    1. Nucleus
    2. Ribosome
    3. Mitochondrion
    4. Chloroplast Correct answer.

    Explanation

    Photosynthesis occurs in chloroplasts, which contain chlorophyll and the enzymes needed to fix carbon dioxide into sugars. Other organelles carry out different, equally essential jobs in the cell.

  2. Question 2Tree Biology and Identification

    Most of the water absorbed by a tree returns to the atmosphere through which process?

    1. Translocation
    2. Respiration
    3. Guttation
    4. Transpiration Correct answer.

    Explanation

    Transpiration is the evaporation of water from leaf surfaces, chiefly through stomata, and accounts for the great majority of a tree's water loss. It also generates the pull that lifts water through the xylem.

  3. Question 3Tree Biology and Identification

    Which tissue conducts water and dissolved minerals from the roots toward the leaves?

    1. Xylem Correct answer.
    2. Phloem
    3. Cortex
    4. Pith

    Explanation

    Xylem is the water-conducting tissue; its tracheids and vessel elements form continuous tubes running from the roots to the leaves. The other tissues listed serve transport of sugars, storage, or packing.

  4. Question 4Tree Biology and Identification

    A twig bears two leaves at each node, attached on directly opposite sides of the stem. This arrangement is called:

    1. Whorled
    2. Alternate
    3. Fascicled
    4. Opposite Correct answer.

    Explanation

    Leaf arrangement is named by how many leaves attach at each node: one is alternate, two facing each other is opposite, and three or more is whorled. Fascicled leaves are clustered in bundles rather than paired across the stem.

  5. Question 5Tree Biology and Identification

    Which of these trees is a gymnosperm?

    1. Red maple
    2. American basswood
    3. Eastern white pine Correct answer.
    4. Northern red oak

    Explanation

    Gymnosperms are seed plants whose seeds sit on the scales of cones rather than inside an ovary; pines are typical examples. Maples, oaks and basswoods are angiosperms that flower and enclose their seeds in fruit.

  6. Question 6Tree Biology and Identification

    Where are most of a tree's water-absorbing fine roots located?

    1. Below the permanent water table
    2. In the upper soil layers Correct answer.
    3. In the deepest subsoil
    4. Inside the heartwood

    Explanation

    Fine roots concentrate in the shallow, well-aerated upper soil where oxygen, water and nutrients are plentiful, and they often extend far beyond the drip line. Deep or saturated soil holds too little oxygen to support much root activity.

  7. Question 7Tree Biology and Identification

    The vascular cambium produces which two tissues?

    1. Xylem to the inside and phloem to the outside Correct answer.
    2. Cork to the inside and pith to the outside
    3. Phloem to the inside and xylem to the outside
    4. Pith to the inside and bark to the outside

    Explanation

    The vascular cambium is a lateral meristem that produces secondary xylem on its inner face and secondary phloem on its outer face. Because far more xylem is made, the woody cylinder builds up inward year after year.

  8. Question 8Tree Biology and Identification

    In a climate with one distinct growing season per year, how many growth rings does a tree normally add each year?

    1. Three
    2. Four
    3. Two
    4. One Correct answer.

    Explanation

    Each year of secondary growth typically consists of one band of earlywood and one band of latewood, which together count as a single annual ring. Extra rings can appear after drought or defoliation, but one per year is the rule.

  9. Question 9Tree Biology and Identification

    When a tree is under severe water stress, its guard cells generally:

    1. Close the stomata and cut water loss Correct answer.
    2. Expand so that the stomatal pores widen
    3. Secrete additional wax over the leaf surface
    4. Open the stomata to increase cooling

    Explanation

    Guard cells lose turgor as water stress develops, which closes the stomatal pore and sharply reduces transpirational loss. The trade-off is reduced carbon dioxide uptake, so photosynthesis declines at the same time.

  10. Question 10Tree Biology and Identification

    Auxin produced in a shoot's terminal bud generally:

    1. Promotes the growth of lateral buds below it
    2. Kills the cambium in the internodes
    3. Suppresses the growth of lateral buds below it Correct answer.
    4. Causes the shoot to bend toward gravity

    Explanation

    Auxin moving down from the terminal bud inhibits lateral buds, concentrating growth in the leader; this is apical dominance. Removing the terminal bud lowers the auxin supply below it and releases lateral shoots, which is why heading cuts stimulate branching.

  11. Question 11Tree Biology and Identification

    In the CODIT model, the tree's first wall of defense against decay is formed by:

    1. Plugging of existing xylem vessels Correct answer.
    2. A new barrier zone of cork cambium
    3. Shedding of the outer bark
    4. Wood laid down after wounding

    Explanation

    Wall 1 forms fastest and is the weakest: existing xylem elements are plugged with tyloses and gums, slowing decay organisms moving up and down the stem. Later walls involve changes in living cells, denser latewood, and finally a new barrier zone.

  12. Question 12Tree Biology and Identification

    What is a primary function of rays in wood?

    1. Radial transport and storage Correct answer.
    2. Yearly production of new periderm
    3. Upward conduction of sap in spring
    4. Structural anchorage of the trunk

    Explanation

    Rays are ribbons of parenchyma cells running radially, moving water, minerals and carbohydrates between xylem and phloem and storing starch. They also take part in compartmentalizing wounds.

  13. Question 13Tree Biology and Identification

    Which feature is characteristic of monocotyledonous plants?

    1. Two cotyledons in the seed
    2. Vascular bundles scattered through the stem Correct answer.
    3. Net-like venation in the leaves
    4. Annual rings produced by a vascular cambium

    Explanation

    Monocots have one cotyledon, parallel leaf veins, and vascular bundles scattered across the stem rather than arranged in a ring, so they normally lack true secondary growth. Nearly all trees are dicots, which show net venation and a vascular cambium.

  14. Question 14Tree Biology and Identification

    Mycorrhizal fungi benefit a tree mainly by:

    1. Extending the roots' absorbing surface Correct answer.
    2. Preventing the formation of heartwood
    3. Fixing atmospheric nitrogen in the canopy
    4. Producing auxin that drives apical dominance

    Explanation

    Fungal hyphae reach far beyond the root surface, greatly enlarging the absorbing area for water and nutrients, especially phosphorus. The tree repays the fungus with sugars from photosynthesis.

  15. Question 15Tree Biology and Identification

    Compared with water movement in the xylem, translocation in the phloem:

    1. Always moves toward the root system
    2. Occurs only at night
    3. Occurs only in conifers
    4. Can move up or down toward sinks Correct answer.

    Explanation

    Phloem sap moves from sources such as mature leaves to sinks such as growing shoots, roots or developing fruit, so its direction changes with the location of the sink and the season. Xylem flow is essentially one-way from roots to leaves.

  16. Question 16Tree Biology and Identification

    A leaf whose blade is divided into separate leaflets arranged along a central rachis is:

    1. Pinnately compound Correct answer.
    2. Palmately lobed
    3. Whorled
    4. Simple

    Explanation

    A pinnately compound leaf has leaflets attached along both sides of the rachis, while a palmately compound leaf has leaflets meeting at one point. Terms such as alternate, opposite and whorled describe how whole leaves attach to the stem.

  17. Question 17Tree Biology and Identification

    A tree whose single dominant leader persists to the top of the crown has which form?

    1. Excurrent Correct answer.
    2. Vase-shaped
    3. Weeping
    4. Decurrent

    Explanation

    An excurrent crown keeps a strong central leader running through the tree, giving a conical outline as in many conifers. In a decurrent crown the leader is overtopped and the crown spreads into several large scaffold limbs.

  18. Question 18Tree Biology and Identification

    In a broadleaf, most photosynthesis takes place in which tissue?

    1. The palisade mesophyll Correct answer.
    2. The spongy mesophyll
    3. The vascular cambium
    4. The lower epidermis

    Explanation

    Palisade mesophyll cells are packed with chloroplasts and stand in columns near the upper surface, where light reaches them with least interference. The spongy mesophyll below is specialized mainly for gas movement.

  19. Question 19Tree Biology and Identification

    Compared with sun leaves of the same species, shade leaves tend to be:

    1. Thinner and larger in area Correct answer.
    2. Covered with a thicker cuticle
    3. Free of chlorophyll
    4. Thicker and smaller in area

    Explanation

    Shade leaves maximize light capture with a broad, thin blade and fewer palisade layers, while sun leaves are smaller, thicker and more heavily cutinized to limit water loss and tolerate high light. Both types are fully green and photosynthetic.

  20. Question 20Tree Biology and Identification

    What is the main function of lenticels on the bark of a young stem?

    1. Gas exchange through the bark Correct answer.
    2. Wound sealing against decay
    3. Sap conduction to the leaves
    4. Reserve starch storage

    Explanation

    Lenticels are loose masses of cells in the periderm that allow oxygen and carbon dioxide to diffuse in and out, since corky bark is otherwise nearly impermeable. They appear as raised dots or slits on young twigs and branches.

  21. Question 21Tree Biology and Identification

    The Casparian strip, a waxy band that forces water to pass through living membranes before entering the vascular cylinder, is found in the:

    1. Pith
    2. Epidermis
    3. Pericycle
    4. Endodermis Correct answer.

    Explanation

    The endodermis is the innermost layer of the root cortex, and its Casparian strip blocks movement through cell walls, forcing water and minerals through membranes where selective uptake can occur. This lets the root regulate what reaches the xylem.

  22. Question 22Tree Biology and Identification

    In a leaning hardwood stem, reaction wood forms on which side, and what is it called?

    1. On the lower side; tension wood
    2. On the lower side; compression wood
    3. On the upper side; tension wood Correct answer.
    4. Evenly around the stem; normal wood

    Explanation

    Hardwoods form tension wood on the upper side of a leaning stem, and its gelatinous fibers contract to pull the stem upward. Conifers respond differently, forming compression wood on the lower side that pushes the stem upright.

  23. Question 23Tree Biology and Identification

    Wood in which large earlywood vessels form a distinct ring, as in oaks and ashes, is described as:

    1. Compression wood
    2. Diffuse-porous
    3. Ring-porous Correct answer.
    4. Non-porous

    Explanation

    Ring-porous woods concentrate wide vessels in the earlywood, creating a visible band each year. Diffuse-porous woods such as maple and birch have vessels of similar size spread through the ring, and non-porous woods such as pines conduct through tracheids and lack vessels altogether.

  24. Question 24Tree Biology and Identification

    Chlorophyll absorbs light most strongly in which parts of the spectrum?

    1. Green and yellow
    2. Red and blue Correct answer.
    3. Infrared only
    4. Ultraviolet only

    Explanation

    Chlorophyll a and b absorb mainly red and blue-violet wavelengths and reflect green, which is why healthy foliage looks green. Green light is therefore used relatively poorly in photosynthesis.

  25. Question 25Tree Biology and Identification

    Which cell type conducts water in conifers and also provides structural support?

    1. Companion cell
    2. Vessel element
    3. Tracheid Correct answer.
    4. Sieve tube

    Explanation

    Conifer wood consists almost entirely of tracheids, elongated cells with tapered ends that conduct water through pits and also bear mechanical load. Vessel elements are the wider conducting cells of hardwoods, while sieve tubes and companion cells belong to the phloem.

  26. Question 26Soil and Water Management

    Which soil separate has the largest particles and drains most rapidly?

    1. Silt
    2. Peat
    3. Clay
    4. Sand Correct answer.

    Explanation

    Soil separates are ranked by particle size: sand is the largest, followed by silt, then clay. Large particles create large pore spaces, so water moves through sand quickly and it holds little water. Clay particles are tiny and pack tightly, giving slow drainage and high water retention.

  27. Question 27Soil and Water Management

    Most landscape trees grow best within which soil pH range?

    1. 8.5 to 9.5
    2. 7.5 to 8.5
    3. 5.5 to 7.0 Correct answer.
    4. 3.0 to 4.5

    Explanation

    The majority of landscape trees perform well in slightly acid to neutral soil, roughly pH 5.5 to 7.0. In this range most essential nutrients remain soluble and available while toxic elements such as aluminum stay insoluble. Strongly acid or strongly alkaline soils commonly produce deficiencies.

  28. Question 28Soil and Water Management

    Which soil component contributes most to cation exchange capacity?

    1. Silt particles
    2. Sand particles
    3. Humus and clay Correct answer.
    4. Gravel fragments

    Explanation

    Cation exchange capacity comes from negatively charged surfaces that hold nutrient cations. Clay minerals and humus have very large surface areas and abundant charge sites, so they supply nearly all of the exchange capacity. Sand, silt and gravel have little surface charge.

  29. Question 29Soil and Water Management

    Which field observation most directly indicates soil compaction in a tree's root zone?

    1. High bulk density reading Correct answer.
    2. Thick dark organic layer
    3. Abundant earthworm activity
    4. Loose crumbly surface soil

    Explanation

    Compaction squeezes soil particles together, reducing pore space and raising bulk density. High bulk density, together with slow infiltration and hard resistance to a penetrometer, is the standard field indicator. Earthworms, crumb structure and deep litter indicate well-aerated, uncompacted soil.

  30. Question 30Soil and Water Management

    Why does prolonged flooding injure the roots of most upland trees?

    1. Carbon dioxide disappears
    2. Clay particles dissolve away
    3. Pore spaces lose oxygen Correct answer.
    4. Soil temperature falls sharply

    Explanation

    Roots need oxygen for respiration, and gas exchange in saturated soil is extremely slow because diffusion through water is about ten thousand times slower than through air. Oxygen is consumed faster than it is replaced, so roots suffocate and die. Anaerobic microbes also produce toxic compounds such as hydrogen sulfide.

  31. Question 31Soil and Water Management

    Which soil texture generally supplies the greatest amount of plant-available water?

    1. Silt loam Correct answer.
    2. Coarse gravel
    3. Coarse sand
    4. Gravelly sand

    Explanation

    Plant-available water is the water held between field capacity and permanent wilting point. Medium-textured soils such as silt loam retain a large share of their water at tensions roots can overcome. Sands drain too freely, while clays hold much water so tightly that roots cannot extract it.

  32. Question 32Soil and Water Management

    A compacted lawn on a slope drains toward a street. Which practice best increases infiltration and reduces runoff?

    1. Watering lightly several times daily
    2. Aerating and topdressing with compost Correct answer.
    3. Removing the turf to bare soil
    4. Applying soluble nitrogen fertilizer

    Explanation

    Core aeration creates macropores that let water enter the profile, and compost improves aggregation and pore continuity. Together they raise infiltration capacity so rainfall soaks in rather than running off. Bare soil and frequent light watering do not restore structure.

  33. Question 33Soil and Water Management

    How deep should organic mulch normally be spread over a tree's root zone?

    1. 2 to 4 inches (5 to 10 cm) Correct answer.
    2. 10 to 12 inches (25 to 30 cm)
    3. 6 to 8 inches (15 to 20 cm)
    4. 0.5 inch (1 cm)

    Explanation

    A 2 to 4 inch layer conserves moisture, moderates temperature and suppresses weeds while still allowing oxygen to diffuse into the soil. Deeper layers can restrict gas exchange and keep the root zone too wet. Mulch should also be pulled back from direct contact with the trunk.

  34. Question 34Soil and Water Management

    A fertilizer label reads 20-5-10. What does the 20 represent?

    1. Percent nitrogen by weight Correct answer.
    2. Percent phosphorus by weight
    3. Percent organic matter by weight
    4. Percent potassium by weight

    Explanation

    Fertilizer grades are always stated in the order nitrogen, available phosphate and soluble potash, expressed as percentages by weight. The first number is therefore the nitrogen content, here 20 percent. The second number refers to phosphate (P2O5), not elemental phosphorus.

  35. Question 35Soil and Water Management

    How does incorporating compost change a sandy soil?

    1. It boosts water and nutrient holding Correct answer.
    2. It raises bulk density sharply
    3. It lowers the cation exchange capacity
    4. It removes the need for irrigation

    Explanation

    Organic matter acts like a sponge and carries negative charge sites, so it increases both water retention and cation exchange capacity in coarse soils. It also binds sand grains into aggregates, improving structure. It does not eliminate the need for irrigation, but it reduces how often water must be applied.

  36. Question 36Soil and Water Management

    Which soil horizon is typically darkest and richest in organic matter?

    1. A horizon Correct answer.
    2. C horizon
    3. E horizon
    4. R horizon

    Explanation

    The A horizon is the surface mineral layer where litter accumulates and decomposes, giving it the darkest color and highest organic matter content. The E horizon is a pale leached layer, the C horizon is weathered parent material, and the R horizon is unweathered bedrock.

  37. Question 37Soil and Water Management

    Which statement about mycorrhizal fungi and tree roots is accurate?

    1. They enlarge the absorptive surface Correct answer.
    2. They fix atmospheric nitrogen in leaves
    3. They cause most root rot diseases
    4. They grow only in waterlogged soil

    Explanation

    Mycorrhizal fungi form associations with fine roots and spread hyphae far beyond the root surface, greatly extending the volume of soil explored for water and nutrients, especially phosphorus. They are beneficial symbionts, not pathogens, and they require well-aerated soil. Nitrogen fixation in woody plants is performed by bacteria in root nodules, not by mycorrhizae.

  38. Question 38Soil and Water Management

    A container-grown tree stands on a solid pavement. Water collects above the drainage holes and forms a saturated layer. What does this mean for the lower root zone?

    1. The lower root zone stays wet Correct answer.
    2. The mix loses all its structure
    3. The whole root ball dries evenly
    4. Water drains faster below the pot

    Explanation

    Gravity cannot pull water out of the bottom of a container, so a saturated zone always sits above the drainage holes. Its height depends on the pore size of the mix: finer mixes hold a taller saturated layer. Frequent watering therefore keeps the lower root ball wet regardless of what drains out.

  39. Question 39Soil and Water Management

    Where is most of a mature tree's fine-root biomass found?

    1. In the top 12 to 18 inches of soil Correct answer.
    2. At depths greater than 6 feet
    3. Below the trunk beneath the dripline
    4. Only under the canopy edge

    Explanation

    Fine roots concentrate in the shallow, well-aerated, organic-rich surface soil, usually within the upper foot or two. Roots also spread well beyond the dripline, often two to three times the canopy radius. Deep rooting occurs but represents a small fraction of the total.

  40. Question 40Soil and Water Management

    Which irrigation approach best encourages deep, drought-tolerant root growth?

    1. Continuous drip at low volume
    2. Frequent light misting at midday
    3. Deep, infrequent soaking Correct answer.
    4. Brief daily sprinklings

    Explanation

    Deep, infrequent irrigation wets the full root zone and then allows the upper soil to dry, which favors roots growing deeper where moisture persists. Shallow or very frequent applications keep water near the surface and promote shallow rooting. Wetting depth is what determines rooting depth.

  41. Question 41Soil and Water Management

    How should a newly planted tree be watered during its first growing season?

    1. Once a week regardless of rain
    2. Never; nursery soil holds enough
    3. Deep soakings of the root ball Correct answer.
    4. Brief daily sprinklings at midday

    Explanation

    The original root ball dries faster than the surrounding backfill soil and must be soaked directly until roots grow outward. Water should be applied slowly to the root ball, and frequency adjusted to rainfall and soil type. Daily light sprinkling wets only the surface.

  42. Question 42Soil and Water Management

    Which treatment relieves compaction in a tree's root zone with the least root damage?

    1. Rototilling the entire root zone
    2. Spreading a thick layer of heavy fill
    3. Tilling the soil to 12 inches
    4. Radial trenching with an air spade Correct answer.

    Explanation

    Air excavation loosens compacted soil while separating it from roots, so the operator can see and avoid tearing them. Radial trenches also create channels for air, water and new roots. Mechanical tillage indiscriminately cuts roots and often recompacts the soil.

  43. Question 43Soil and Water Management

    Injury from saline irrigation water typically produces which symptom pattern on woody plants?

    1. Yellowing between veins on older leaves
    2. Purple stems on new growth
    3. Marginal leaf necrosis on older leaves Correct answer.
    4. White fungal growth on roots

    Explanation

    Salts accumulate at the leaf margins, where water evaporates, and chloride or sodium reaches toxic levels there first. The result is tip and marginal scorch that appears on older leaves before younger ones. Interveinal yellowing on new growth is more typical of iron deficiency.

  44. Question 44Soil and Water Management

    Which practice is most effective at keeping sediment on a bare sloping construction site?

    1. Planting grass after backfilling
    2. Deep tilling of the slope surface
    3. Silt fence at the toe of the slope Correct answer.
    4. Watering the slope daily

    Explanation

    A silt fence placed along the downslope perimeter slows sheet flow and traps sediment before it leaves the site. It should be installed before grading and keyed into the soil. Watering or tilling loose soil does not stop sediment transport.

  45. Question 45Soil and Water Management

    What is the proper way to collect a soil sample from a yard with several trees?

    1. Scrapings from the wettest spot
    2. One core from beneath each tree
    3. A single large sample from the center
    4. Several cores mixed together Correct answer.

    Explanation

    A representative sample is built from many small cores taken randomly across the area to the same depth, then mixed in a clean bucket. A subsample of that mixture is submitted to the laboratory. Single spot samples reflect only local conditions and give misleading results.

  46. Question 46Soil and Water Management

    Why does a clay soil drain slowly after heavy rain?

    1. Clay particles repel water
    2. Pore spaces are very small Correct answer.
    3. Clay holds almost no water
    4. Pore spaces are very large

    Explanation

    Clay particles are microscopic and pack closely, so the resulting pores are tiny and conduct water very slowly. Capillary forces also hold water tightly in those small pores. As a result, clay soils can be saturated for long periods even though they store a lot of water.

  47. Question 47Soil and Water Management

    Which symptom pattern most likely indicates iron deficiency in a tree?

    1. Uniform yellowing of oldest leaves
    2. Yellow between veins on new leaves Correct answer.
    3. Midday wilting of new shoots
    4. Brown margins on all leaves

    Explanation

    Iron is immobile in the plant, so deficiency appears first on the youngest leaves as interveinal chlorosis while the veins remain green. It is common in alkaline or poorly drained soils where iron becomes insoluble. Uniform yellowing of older leaves suggests a mobile nutrient such as nitrogen.

  48. Question 48Soil and Water Management

    How does de-icing salt applied to a paved surface most directly injure nearby trees?

    1. It binds tightly to soil phosphorus
    2. It raises soil pH sharply
    3. It raises soil oxygen levels
    4. Osmosis draws water from roots Correct answer.

    Explanation

    Sodium chloride raises the osmotic potential of the soil solution, so roots must work against a steeper gradient and can lose water to the soil. The result is drought-like stress, marginal scorch and sometimes outright root death. Sodium also degrades soil structure and displaces other cations from exchange sites.

  49. Question 49Soil and Water Management

    When planting a tree in heavy clay soil, which backfill practice is recommended?

    1. Use the excavated soil, unamended Correct answer.
    2. Fill with 100% compost
    3. Fill with gravel for drainage
    4. Line the planting hole with plastic

    Explanation

    The backfill should be the soil removed from the hole, loosened but otherwise unamended, so that water moves uniformly between the root ball and surrounding soil. Radically different backfill textures create a bathtub effect that traps water. Compost is better used as mulch on the surface.

  50. Question 50Soil and Water Management

    A newly planted tree on a poorly drained site wilts at midday even though the soil is wet. What is the most likely cause?

    1. Herbicide drift on the foliage
    2. Drought stress from dry soil
    3. Excess phosphorus in the soil
    4. Fine roots have suffocated Correct answer.

    Explanation

    Saturated soil lacks oxygen, so fine roots die and living roots cannot absorb water efficiently. The plant then shows drought symptoms even though water is abundant. A percolation test or drainage check should be done before further irrigation is added.

  51. Question 51Tree Nutrition and Fertilization

    Which of these is classified as a primary macronutrient in tree nutrition?

    1. Iron
    2. Boron
    3. Calcium
    4. Nitrogen Correct answer.

    Explanation

    Nitrogen, phosphorus, and potassium are the three primary macronutrients because trees need them in the largest amounts. Calcium is a secondary macronutrient, while iron and boron are micronutrients required only in trace quantities.

  52. Question 52Tree Nutrition and Fertilization

    A fertilizer labeled 10-6-4 contains what percentage of nitrogen by weight?

    1. 6 percent
    2. 20 percent
    3. 4 percent
    4. 10 percent Correct answer.

    Explanation

    Fertilizer grades are always given in the order nitrogen, available phosphate, and soluble potash. The first number is the percentage of nitrogen, so a 10-6-4 product is 10 percent nitrogen.

  53. Question 53Tree Nutrition and Fertilization

    Iron deficiency in trees commonly appears as which symptom?

    1. Dark green puckered foliage
    2. Water-soaked spots on fruit
    3. Interveinal yellowing of new leaves Correct answer.
    4. Marginal browning on older leaves

    Explanation

    Iron is relatively immobile in the tree, so deficiency symptoms appear first on the youngest leaves. The classic pattern is yellowing between green veins, often on high-pH soils where iron is less available.

  54. Question 54Tree Nutrition and Fertilization

    In most landscape and urban soils, which nutrient most often limits tree growth?

    1. Calcium
    2. Potassium
    3. Nitrogen Correct answer.
    4. Phosphorus

    Explanation

    Nitrogen is the nutrient most frequently deficient in managed landscapes because it is mobile and is removed with clippings, leaves, and runoff. Phosphorus and potassium are usually adequate in native soils, and calcium is rarely limiting.

  55. Question 55Tree Nutrition and Fertilization

    The goal of deep-root fertilization is to do which of the following?

    1. Raise the soil pH
    2. Coat the trunk and branches with nutrients
    3. Sterilize the soil surface
    4. Place nutrients into the absorbing root zone Correct answer.

    Explanation

    Deep-root fertilization uses injections or probes to deliver nutrients below the turf and thatch into the soil volume where absorbing roots are active. Surface application alone may be intercepted by grass or runoff before reaching tree roots.

  56. Question 56Tree Nutrition and Fertilization

    A ring of organic mulch around a tree primarily improves nutrition by doing what?

    1. Releasing nutrients slowly as it decomposes Correct answer.
    2. Blocking root respiration
    3. Increasing soil compaction
    4. Raising soil pH sharply

    Explanation

    As organic mulch breaks down, it adds organic matter and releases nutrients gradually into the soil. It also improves moisture retention and soil structure, which support nutrient uptake.

  57. Question 57Tree Nutrition and Fertilization

    Soil pH affects tree nutrition mainly by doing which of the following?

    1. Changing the tree's need for carbon
    2. Controlling the solubility and availability of nutrients Correct answer.
    3. Determining the soil's texture class
    4. Regulating the tree's transpiration rate

    Explanation

    Soil pH governs the chemical forms and solubility of many nutrients, so it strongly influences whether elements such as iron, phosphorus, and manganese are available to roots. Most nutrients are most available in a near-neutral range.

  58. Question 58Tree Nutrition and Fertilization

    A deficiency of a mobile nutrient such as nitrogen first shows on which part of the tree?

    1. The older leaves lower on the shoot Correct answer.
    2. The trunk bark
    3. The newest leaves at the branch tips
    4. The buds and flowers

    Explanation

    Mobile nutrients can be retranslocated from older tissues to support new growth, so deficiency symptoms appear first on older leaves. Nitrogen deficiency typically causes overall yellowing and reduced growth on lower, older foliage.

  59. Question 59Tree Nutrition and Fertilization

    Because phosphorus moves very little in soil, trees take it up most effectively through what?

    1. Volatilization from the soil surface
    2. Mass flow in draining water
    3. Leaching from the subsoil
    4. Mycorrhizal fungi that extend beyond the roots Correct answer.

    Explanation

    Phosphorus is relatively immobile in soil and is depleted in a narrow zone around roots. Mycorrhizal fungi extend hyphae beyond this zone and greatly improve phosphorus uptake.

  60. Question 60Tree Nutrition and Fertilization

    Potassium is important to trees primarily because it does what?

    1. Is needed for nitrogen fixation
    2. Regulates water movement and stomatal function Correct answer.
    3. Forms the backbone of proteins
    4. Is a component of chlorophyll

    Explanation

    Potassium helps regulate stomatal opening, water balance, and enzyme activity, which supports drought tolerance and cold hardiness. It is not a structural component of chlorophyll or proteins.

  61. Question 61Tree Nutrition and Fertilization

    A soil with a high cation exchange capacity does which of the following?

    1. Retains more positively charged nutrients Correct answer.
    2. Has a very low clay content
    3. Drains too fast to hold water
    4. Releases only anions to roots

    Explanation

    Cation exchange capacity is the soil's ability to hold positively charged ions such as calcium, magnesium, and potassium on clay and organic matter surfaces. Higher capacity means more nutrients are retained against leaching.

  62. Question 62Tree Nutrition and Fertilization

    Leaf tissue analysis is most useful for which purpose?

    1. Confirming nutrient status and guiding fertilizer decisions Correct answer.
    2. Measuring soil texture
    3. Predicting the tree's age
    4. Replacing a soil test entirely

    Explanation

    Tissue analysis shows what the tree has actually taken up and can confirm a suspected deficiency before fertilizer is applied. It complements soil testing rather than replacing it, because soil tests show what is available.

  63. Question 63Tree Nutrition and Fertilization

    Incorporating fresh wood chips with a high carbon-to-nitrogen ratio into soil can temporarily do what?

    1. Tie up available nitrogen as microbes decompose them Correct answer.
    2. Raise the soil pH above 8
    3. Release large amounts of nitrate
    4. Permanently kill mycorrhizal fungi

    Explanation

    Microbes decomposing high-carbon material consume soil nitrogen, temporarily immobilizing it and reducing availability to roots. This effect is temporary and is more pronounced when chips are mixed into soil than when used as surface mulch.

  64. Question 64Tree Nutrition and Fertilization

    A main advantage of controlled-release nitrogen fertilizer over soluble nitrate is what?

    1. It raises soil pH immediately
    2. It reduces leaching and burn risk Correct answer.
    3. It is absorbed through bark
    4. It supplies phosphorus instead

    Explanation

    Controlled-release fertilizers release nitrogen gradually, matching uptake more closely and reducing losses to leaching. Gradual release also lowers the risk of salt injury compared with a large dose of soluble fertilizer.

  65. Question 65Tree Nutrition and Fertilization

    Foliar fertilization is best used for which purpose?

    1. Replacing soil organic matter
    2. Supplying the tree's entire nitrogen needs
    3. Correcting micronutrient deficiencies quickly Correct answer.
    4. Raising soil pH

    Explanation

    Leaves can absorb small amounts of dissolved nutrients, making foliar sprays useful for rapid correction of micronutrient problems such as iron or zinc deficiency. Foliar feeding cannot supply the bulk of a tree's nitrogen requirement.

  66. Question 66Tree Nutrition and Fertilization

    Why should high-nitrogen fertilizer be avoided in late summer in cold climates?

    1. It prevents root growth
    2. It has no effect on the tree
    3. It can stimulate succulent growth vulnerable to cold injury Correct answer.
    4. It causes immediate leaf drop

    Explanation

    Late-season nitrogen can push new succulent shoots that do not have time to harden off before freezing weather. Fertilization timing should support root and storage growth rather than late shoot extension.

  67. Question 67Tree Nutrition and Fertilization

    For iron chlorosis on a tree growing in alkaline soil, an effective treatment is what?

    1. Soil application of chelated iron Correct answer.
    2. Adding lime to raise pH
    3. Withholding all water
    4. Applying high-phosphorus fertilizer

    Explanation

    Chelated iron keeps iron in a plant-available form even at high pH, and EDDHA chelates are especially effective in alkaline soils. Raising pH further would worsen the deficiency.

  68. Question 68Tree Nutrition and Fertilization

    The most active water- and nutrient-absorbing roots of a mature tree are typically found where?

    1. Deep below 6 feet
    2. Only directly beneath the trunk
    3. In the bark of large roots
    4. In the upper soil layers, often beyond the dripline Correct answer.

    Explanation

    Fine absorbing roots are concentrated in the upper soil horizons where oxygen, water, and organic matter are plentiful. On mature trees they commonly extend well beyond the dripline rather than being confined under the canopy.

  69. Question 69Tree Nutrition and Fertilization

    Magnesium deficiency in trees usually appears as which symptom?

    1. Black lesions on the trunk
    2. Curled, dry leaf margins on young shoots
    3. Yellowing between veins on the newest leaves
    4. Yellowing between veins on older leaves Correct answer.

    Explanation

    Magnesium is mobile and is a central component of chlorophyll, so the tree moves it from older leaves to support new growth. Deficiency therefore shows as interveinal chlorosis on older foliage first.

  70. Question 70Tree Nutrition and Fertilization

    Soil organic matter supports tree nutrition mainly by doing what?

    1. Reducing microbial activity
    2. Locking up all nitrogen permanently
    3. Increasing cation exchange capacity and nutrient cycling Correct answer.
    4. Increasing soil bulk density

    Explanation

    Organic matter provides exchange sites that hold nutrient cations and supports the soil microbes that cycle nitrogen, phosphorus, and other nutrients. It also improves structure and water retention.

  71. Question 71Tree Nutrition and Fertilization

    Liebig's law of the minimum states that tree growth is limited by what?

    1. The nutrient most abundant in the soil
    2. The tree's age regardless of nutrients
    3. The total amount of fertilizer applied
    4. The nutrient in shortest supply relative to need Correct answer.

    Explanation

    Growth is controlled by the scarcest essential resource, even when other nutrients are abundant. Adding nutrients that are already sufficient will not increase growth until the limiting factor is relieved.

  72. Question 72Tree Nutrition and Fertilization

    A 50-pound bag of 20-5-10 fertilizer contains how many pounds of nitrogen?

    1. 5 pounds
    2. 10 pounds Correct answer.
    3. 2.5 pounds
    4. 20 pounds

    Explanation

    The first number in the grade is the percentage of nitrogen, so 20 percent of 50 pounds is 10 pounds of nitrogen. The remaining weight consists of other nutrients and carrier materials.

  73. Question 73Tree Nutrition and Fertilization

    Which statement about nitrogen forms in soil is correct?

    1. Nitrate is mobile and readily leaches below the root zone Correct answer.
    2. Nitrate is held strongly on cation exchange sites
    3. Organic nitrogen is taken up directly by roots in large amounts
    4. Ammonium leaches as readily as nitrate

    Explanation

    Nitrate is an anion and is not retained by negatively charged exchange sites, so it moves with soil water and can leach below the root zone. Ammonium is a cation and is held more strongly until it is converted to nitrate.

  74. Question 74Tree Nutrition and Fertilization

    Applying large amounts of potassium fertilizer can induce a deficiency of which nutrient?

    1. Phosphorus
    2. Magnesium Correct answer.
    3. Iron
    4. Nitrogen

    Explanation

    Potassium and magnesium compete for uptake, so excessive potassium can suppress magnesium absorption and produce deficiency symptoms. This antagonism is a reason to base fertilizer rates on soil and tissue tests.

  75. Question 75Tree Nutrition and Fertilization

    In a calcareous soil with high lime content, phosphorus availability is usually low because phosphorus does what?

    1. Volatilizes into the atmosphere
    2. Is fixed as calcium phosphate compounds Correct answer.
    3. Becomes a cation held on exchange sites
    4. Is leached rapidly downward

    Explanation

    In high-pH, calcium-rich soils, phosphate reacts with calcium to form relatively insoluble calcium phosphate compounds. This fixation reduces the amount of phosphorus available to roots even when total soil phosphorus is adequate.

  76. Question 76Tree Installation and Establishment

    How wide should the planting hole be for a balled-and-burlapped tree?

    1. Exactly the width of the root ball
    2. Two to three times the width of the root ball Correct answer.
    3. About one and a half times the width of the root ball
    4. At least six times the width of the root ball

    Explanation

    A hole dug two to three times as wide as the root ball loosens enough soil for rapid lateral root growth. A hole only as wide as the ball leaves new roots pressing against compacted soil, which slows establishment.

  77. Question 77Tree Installation and Establishment

    At what depth should a tree be set in the planting hole?

    1. Root flare at or slightly above the surrounding grade Correct answer.
    2. Root flare about 2 inches below grade
    3. Deep enough that the first major roots are covered by 4 inches of soil
    4. Top of the root ball 3 inches below grade

    Explanation

    The root flare, where the trunk widens into the root system, must stay exposed at or slightly above grade. Burying it reduces oxygen to the roots and keeps trunk tissue chronically wet, leading to decay and girdling roots.

  78. Question 78Tree Installation and Establishment

    What is the recommended depth for mulch around a newly planted tree?

    1. Eight to ten inches
    2. One-half inch
    3. Two to four inches Correct answer.
    4. Six to eight inches

    Explanation

    A two- to four-inch layer conserves moisture and moderates soil temperature while still allowing oxygen to reach the roots. Deeper layers restrict gas exchange and can keep the lower trunk too wet.

  79. Question 79Tree Installation and Establishment

    What should be done immediately after a tree is planted and backfilled?

    1. Apply a high-nitrogen fertilizer
    2. Prune one third of the canopy
    3. Tamp the soil with heavy equipment
    4. Water thoroughly to settle the soil Correct answer.

    Explanation

    Thorough watering settles the backfill around the root ball and closes the air pockets that would otherwise dry roots out. The water also rehydrates a root ball that may have dried in storage or transit.

  80. Question 80Tree Installation and Establishment

    How should the wire basket of a balled-and-burlapped tree be handled at planting?

    1. Cut away the top portion after positioning the tree Correct answer.
    2. Remove the entire basket before lifting the tree
    3. Cut only the bottom and leave the rest
    4. Leave the basket completely intact

    Explanation

    Wire and burlap left around the upper part of the ball can girdle the trunk and wick moisture away from the root ball. The lower portion is usually left in place because it holds the ball together while the tree is being positioned.

  81. Question 81Tree Installation and Establishment

    When should stakes and ties normally be removed from a newly planted tree?

    1. After one growing season Correct answer.
    2. After two weeks
    3. After five years
    4. Never; stakes should remain permanently

    Explanation

    Staking is a temporary aid; ties are typically removed after about one growing season, once new roots have begun anchoring the tree. Leaving support in place longer produces a thinner trunk with less taper and can cause girdling at the tie.

  82. Question 82Tree Installation and Establishment

    A container-grown tree has a dense mat of roots circling the outside of the root ball. What should be done at planting?

    1. Cut the ball back to bare roots
    2. Trim the canopy to match the root loss
    3. Plant it as is; circling roots will straighten out
    4. Loosen and spread the circling roots Correct answer.

    Explanation

    Circling roots that are not redirected will continue to grow in a circle and eventually girdle the trunk. Teasing the roots apart, making vertical cuts, or severing the circling roots encourages them to grow outward into the surrounding soil.

  83. Question 83Tree Installation and Establishment

    What is the main advantage of planting in autumn in regions with mild winters?

    1. The tree needs no water until spring
    2. Roots grow in warm soil while shoot demand is low Correct answer.
    3. Foliage grows faster in cool weather
    4. Wounds from pruning seal more quickly

    Explanation

    With shoots dormant but soil still warm, autumn planting lets roots establish without the water loss imposed by an active canopy. The root system is better developed before the demands of the following spring.

  84. Question 84Tree Installation and Establishment

    A percolation test shows water draining from the planting hole at less than one inch per hour. What is the most appropriate response?

    1. Amend the backfill heavily with sand
    2. Plant deeper so roots reach moist soil
    3. Add a layer of gravel to the bottom of the hole
    4. Plant on a raised mound or choose a wet-tolerant species Correct answer.

    Explanation

    Very slow drainage means the root zone will stay saturated and short of oxygen. Raising the root ball above grade in a mound, or matching the species to a wet site, addresses the site limitation instead of fighting it.

  85. Question 85Tree Installation and Establishment

    What is the correct way to lift and move a balled-and-burlapped tree?

    1. By the trunk just above the root ball
    2. By the root ball itself Correct answer.
    3. By the branches near the leader
    4. By a strap on the trunk with the ball hanging

    Explanation

    The root ball is heavy and must be supported from beneath or cradled so that it does not crack or separate from the trunk. Lifting by the trunk can loosen the ball and tear the cambium that connects trunk and roots.

  86. Question 86Tree Installation and Establishment

    What material should be used to backfill the planting hole around a new tree?

    1. Commercial potting soil
    2. The native soil dug from the hole Correct answer.
    3. A mix of peat moss and sand
    4. A blend of compost, topsoil and fertilizer

    Explanation

    Research consistently shows that amending the backfill gives little benefit and can create a textural boundary that impedes water movement between the hole and surrounding soil. Native soil encourages roots to grow out into the site soil.

  87. Question 87Tree Installation and Establishment

    Which statement best reflects current recommendations for wrapping the trunk of a newly planted tree?

    1. Wrapping prevents sunscald and should be applied to all species
    2. Wrapping should be maintained for at least three years
    3. Routine wrapping is not recommended for most trees Correct answer.
    4. Wrapping increases trunk caliper growth

    Explanation

    Trunk wraps generally trap moisture, shelter insects and provide cover for rodents, and they hide developing problems. If a wrap is used for winter sunscald protection on thin-barked species, it should be removed after the dormant season.

  88. Question 88Tree Installation and Establishment

    How much live canopy should normally be removed at the time of planting?

    1. About one third of the live branches
    2. About one half of the live branches
    3. None, except dead, broken or conflicting branches Correct answer.
    4. All branches below the first main scaffold

    Explanation

    Leaves produce the carbohydrates that fuel root regeneration, so removing live branches at planting slows establishment. Only dead, broken, diseased or structurally conflicting branches should be removed, along with any necessary corrective pruning.

  89. Question 89Tree Installation and Establishment

    A tree planted two years ago with its root ball four inches below grade is declining, with sparse, stunted growth. What is the most likely cause?

    1. Roots are drying out because the soil is too shallow
    2. The root ball has lifted as the soil froze
    3. The tree is receiving too much sunlight at the root zone
    4. Oxygen is cut off from the roots and the buried trunk decays Correct answer.

    Explanation

    Roots need oxygen, and a root ball sunk below grade sits in a zone where gas exchange is poor. Trunk tissue that should be dry is also held moist, so the bark and cambium begin to decay, which shows up as sparse, stunted growth.

  90. Question 90Tree Installation and Establishment

    For a balled-and-burlapped tree, the root ball diameter should be roughly how large relative to trunk caliper?

    1. Two inches of ball per inch of trunk caliper
    2. Five inches of ball per inch of trunk caliper
    3. Ten to twelve inches of ball per inch of trunk caliper Correct answer.
    4. Twenty inches of ball per inch of trunk caliper

    Explanation

    Nursery standards set minimum root ball diameters at roughly ten to twelve inches of ball for each inch of trunk caliper. A ball that is too small carries too few roots to support the canopy after transplanting.

  91. Question 91Tree Installation and Establishment

    What is the recommended fertilization practice at the time of planting?

    1. Apply nitrogen to stimulate root growth
    2. Apply high-phosphorus fertilizer to encourage rooting
    3. None; wait until the tree is established Correct answer.
    4. Place slow-release fertilizer in the bottom of the hole

    Explanation

    Fertilizer applied at planting is not taken up efficiently by a root system that is still regenerating and can injure new roots. Nutrient needs are better assessed once the tree is established and a soil test indicates a deficiency.

  92. Question 92Tree Installation and Establishment

    Which staking method best promotes a strong trunk on a newly planted tree?

    1. Stakes driven through the root ball
    2. Flexible ties with slack allowing limited trunk movement Correct answer.
    3. Two stakes with rigid ties holding the trunk immobile
    4. A single stake tied tightly at the top of the leader

    Explanation

    Some trunk movement stimulates caliper growth, taper and root development. Rigid support produces a thinner, weaker trunk, and driving stakes through the ball destroys roots.

  93. Question 93Tree Installation and Establishment

    Leaf scorch, premature fall color and reduced growth in the first year after transplanting are primarily caused by what?

    1. Excess carbohydrates stored in the nursery
    2. Competition from weeds for light and moisture
    3. A surplus of soil nitrogen
    4. Root loss reducing water uptake below canopy demand Correct answer.

    Explanation

    Transplanting removes much of the absorbing root system while the canopy remains, so water lost through the leaves can exceed what the roots can replace. The resulting water stress shows up as scorch, early color and slowed growth.

  94. Question 94Tree Installation and Establishment

    What is essential when handling bare-root nursery stock before planting?

    1. Keeping the roots moist and covered at all times Correct answer.
    2. Soaking the roots in fertilizer solution
    3. Drying the roots to prevent rot
    4. Removing all fine roots

    Explanation

    Bare-root roots have no soil to protect them and desiccate very quickly, so they must be kept moist and shaded from the moment they are unpacked until they are in the ground. Desiccated fine roots die and cannot be revived by later watering.

  95. Question 95Tree Installation and Establishment

    Which practice best protects the trunk of a newly planted tree in a lawn?

    1. Packing soil into a mound around the base
    2. Piling grass clippings against the trunk
    3. Wrapping the trunk in plastic
    4. Maintaining a mulch ring around the base Correct answer.

    Explanation

    A mulch ring keeps mowers and string trimmers away from the bark and eliminates the competition of turfgrass near the trunk. It also conserves moisture over the root ball without burying the flare.

  96. Question 96Tree Installation and Establishment

    Compared with a large caliper balled-and-burlapped tree of the same species, a small nursery tree planted on the same site generally does what?

    1. Establishes faster and usually catches up in size Correct answer.
    2. Grows the same but needs more first-year fertilizer
    3. Dies more often because it cannot compete with weeds
    4. Requires permanent staking

    Explanation

    Smaller trees have a proportionally larger root system relative to their canopy, so they re-establish quickly and often match a larger transplant within a few years. Large transplants spend longer overcoming transplant shock.

  97. Question 97Tree Installation and Establishment

    When building a soil berm to form a watering basin around a newly planted tree, where should the berm be placed?

    1. At the outer edge of the root ball or slightly beyond Correct answer.
    2. About two feet inside the edge of the root ball
    3. Directly against the trunk
    4. Far outside the root ball, at least six feet away

    Explanation

    Water applied inside a berm placed at the edge of the ball soaks into the root ball where the roots actually are. A berm beyond the ball sheds water into surrounding soil the roots have not yet reached, and a berm against the trunk keeps the bark wet.

  98. Question 98Tree Installation and Establishment

    How long does a transplanted tree typically take to become established?

    1. About one month
    2. Ten years for all trees
    3. One growing season, regardless of size
    4. Roughly one year per inch of trunk diameter Correct answer.

    Explanation

    A common rule of thumb is one year of establishment for each inch of trunk diameter, because the root system must regenerate and extend before the tree is self-sufficient. Larger transplants therefore need longer care than small ones.

  99. Question 99Tree Installation and Establishment

    A planting hole is dug with an auger in moist clay soil. Why should the sides and bottom of the hole be roughened before planting?

    1. Auger walls are smeared and compacted, restricting roots Correct answer.
    2. A rough surface keeps the root ball from tipping
    3. Roughening releases nutrients from clay particles
    4. Roughening increases drainage into the subsoil

    Explanation

    An auger polishes and compacts the walls of the hole in clay, creating a boundary that roots and water cross with difficulty. Scarifying the sides and loosening the bottom restores pores so roots can grow out of the backfill.

  100. Question 100Pruning and Tree Support Systems

    When removing a live branch from a tree, where should the final cut be positioned?

    1. Flush with the parent stem so the wound can seal quickly
    2. Just outside the branch collar, leaving the collar intact Correct answer.
    3. Leaving a stub about twice the width of the branch
    4. At the top of the branch bark ridge and flush at the bottom

    Explanation

    The branch collar contains the branch protection zone, a region of chemically altered wood that resists decay. A cut made just outside the collar preserves this tissue and allows woundwood to form a closing seal over the wound.

  101. Question 101Pruning and Tree Support Systems

    Why is the three-cut method used when removing a branch too large to support by hand?

    1. To reduce the amount of woundwood the tree must produce
    2. To sterilize the saw blade before the final cut is made
    3. To prevent a strip of bark from tearing down the parent stem Correct answer.
    4. To stimulate new shoots to grow below the cut

    Explanation

    The first undercut severs the bark on the underside of the branch, so when the branch falls it breaks away cleanly instead of peeling a long strip of bark and cambium down the stem. The final cut is then made at the branch collar.

  102. Question 102Pruning and Tree Support Systems

    What is the current recommendation for applying wound dressing to pruning cuts?

    1. Apply it only to conifers, which cannot compartmentalize wounds
    2. Apply it to every cut larger than two inches in diameter
    3. Do not apply it; it does not prevent decay and may interfere with closure Correct answer.
    4. Apply it in summer to keep insects from laying eggs on the wound

    Explanation

    Research has shown that pruning paints and wound dressings do not prevent wood decay and can trap moisture behind the coating. The tree's own compartmentalization process is its primary defense, so dressings are generally not recommended.

  103. Question 103Pruning and Tree Support Systems

    Removing the lowest branches of a tree so that people and vehicles can pass beneath it is called:

    1. Crown reduction
    2. Crown cleaning
    3. Crown thinning
    4. Crown raising Correct answer.

    Explanation

    Crown raising is the removal of lower branches to provide vertical clearance above sidewalks, streets, or structures. It differs from thinning, which removes interior live branches throughout the crown.

  104. Question 104Pruning and Tree Support Systems

    Which pruning practice removes dead, dying, diseased, and broken branches from a tree crown?

    1. Crown thinning
    2. Crown cleaning Correct answer.
    3. Crown raising
    4. Crown reduction

    Explanation

    Crown cleaning is defined as the removal of dead, dying, diseased, broken, and weakly attached branches. It is the most common routine pruning operation on mature trees.

  105. Question 105Pruning and Tree Support Systems

    When a tree is planted, what pruning is appropriate at that time?

    1. Head back all scaffold branches to force new shoots lower on the trunk
    2. Remove only broken, dead, or diseased branches and those that conflict with the leader Correct answer.
    3. Cut back the top by one-third to balance the loss of roots during digging
    4. Thin the interior crown heavily to reduce transpiration until roots establish

    Explanation

    At planting the tree needs its leaves to produce carbohydrates for root establishment, and root loss at digging does not require a matching reduction of the top. Only damaged branches and those competing with the leader should be removed.

  106. Question 106Pruning and Tree Support Systems

    What does lion tailing describe?

    1. Removing most interior lateral branches so foliage remains only at the limb ends Correct answer.
    2. Removing dead wood from the upper crown only
    3. Cutting back the main leaders to stubs to force a dense, bushy crown
    4. Removing the lowest limbs to raise the crown above a street or sidewalk

    Explanation

    Lion tailing leaves foliage concentrated at the tips of long, bare limbs, which shifts weight outward and exposes the inner bark to sunscald. It also triggers vigorous epicormic sprouting along the exposed limbs.

  107. Question 107Pruning and Tree Support Systems

    Which statement about hand pruning tools is accurate?

    1. Anvil pruners produce the cleanest cuts on small living twigs and young shoots
    2. Anvil pruners are preferred for live green wood because the flat anvil seals the cut
    3. Bypass pruners cut with a scissor action and are preferred for live wood Correct answer.
    4. Bypass pruners crush the stem between two flat surfaces and damage the cambium

    Explanation

    Bypass pruners have a curved blade that passes beside a hook, slicing cleanly through living tissue. Anvil pruners press the stem against a flat surface and tend to crush tissue, so they are better suited to dead wood.

  108. Question 108Pruning and Tree Support Systems

    What is the maximum amount of live crown that should normally be removed in a single pruning season from a mature tree?

    1. About 75 percent
    2. About 25 percent Correct answer.
    3. About 10 percent
    4. About 50 percent

    Explanation

    Removing more than roughly one-quarter of the live crown in one season sharply reduces carbohydrate production and stored reserves. Guidelines commonly cap live crown removal at 25 percent per season, with less on stressed or declining trees.

  109. Question 109Pruning and Tree Support Systems

    When making a reduction cut, the lateral branch left to assume dominance should be at least what size relative to the branch being removed?

    1. Twice the diameter
    2. One-tenth the diameter
    3. Exactly the same diameter
    4. One-third the diameter Correct answer.

    Explanation

    A lateral at least one-third the diameter of the removed branch is large enough to assume apical dominance and suppress sprouting at the cut. Smaller laterals are often outgrown or trigger vigorous epicormic shoots.

  110. Question 110Pruning and Tree Support Systems

    A young tree has two co-dominant stems with a narrow union. What is the recommended structural pruning approach?

    1. Remove one of the two stems entirely with a single cut at planting time
    2. Over several years, make reduction cuts on the less desirable stem to slow its growth Correct answer.
    3. Shorten both stems equally every year so that they stay balanced
    4. Leave both stems in place and install a static cable immediately

    Explanation

    Subordination gradually slows the competing stem so the tree can strengthen the union and develop a single leader without a large wound. Repeated moderate reduction cuts are preferred to removing a large stem all at once.

  111. Question 111Pruning and Tree Support Systems

    Why are temporary branches retained on the lower trunk of a young tree during structural pruning?

    1. They keep the lower trunk warm through winter and prevent frost cracks
    2. They shade and thicken the trunk and are removed gradually over several years Correct answer.
    3. They prevent the tree from flowering before it reaches mature size
    4. They are required by pruning standards to remain on the trunk permanently

    Explanation

    Temporary branches produce carbohydrates that increase trunk caliper and shade young bark from sunscald. They are shortened over time and eventually removed as the permanent canopy develops.

  112. Question 112Pruning and Tree Support Systems

    How long should guying or staking of a newly planted tree normally remain in place?

    1. One or two growing seasons at most Correct answer.
    2. For the life of the tree
    3. Five years, to ensure the roots are firmly anchored
    4. Until the tree reaches at least six inches in caliper

    Explanation

    Support should be removed after one or two growing seasons, once roots have anchored the tree, so the trunk can move and develop reaction wood. Prolonged staking produces a weaker trunk with poor taper.

  113. Question 113Pruning and Tree Support Systems

    What type of hardware is commonly specified for a static steel cable in a tree support system?

    1. A chain fitted with a shock absorber
    2. A single-strand aluminum wire
    3. Extra-high-strength seven-strand galvanized steel cable Correct answer.
    4. Nylon rope rated for outdoor use

    Explanation

    Static systems commonly use extra-high-strength seven-strand galvanized cable with thimbles, clamps, and through-bolts or lag eyes. The stranded construction resists fatigue while providing high tensile strength.

  114. Question 114Pruning and Tree Support Systems

    What is the main purpose of a dynamic tree support system?

    1. To allow some movement so the tree can build reaction wood and share loads Correct answer.
    2. To replace the need for any structural pruning in the crown
    3. To hold a weak union rigidly so that it cannot move at all
    4. To lift a leaning tree upright and keep it permanently vertical

    Explanation

    Dynamic systems use rope or webbing that limits extreme movement while still permitting normal sway, encouraging the tree to strengthen the union. Static systems, by contrast, restrict movement.

  115. Question 115Pruning and Tree Support Systems

    When pruning a tree infected with fire blight, what tool practice is recommended between cuts?

    1. Rinse the blades in clean water only
    2. Use the same blades without cleaning to save time in the field
    3. Wipe the blades with oil to keep them moving freely between cuts
    4. Disinfect the blades with 70 percent alcohol or a freshly mixed bleach solution Correct answer.

    Explanation

    Fire blight bacteria are spread on contaminated blades, so disinfecting between cuts reduces transmission to healthy tissue. Alcohol or dilute bleach are common disinfectants, and debris should be cleaned from the tools first.

  116. Question 116Pruning and Tree Support Systems

    To reduce the risk of oak wilt transmission, when should fresh pruning wounds on oaks be avoided in areas where the disease occurs?

    1. During spring, when sap-feeding beetles are active Correct answer.
    2. During dry summer weather
    3. In late autumn after leaf fall
    4. In mid-winter, when the tree is fully dormant

    Explanation

    Sap beetles that carry oak wilt spores are attracted to fresh wounds in spring and can infect the tree. Pruning is therefore scheduled for the dormant season, and wounds that must be made in spring can be painted.

  117. Question 117Pruning and Tree Support Systems

    What is the recommended practice for pruning a palm tree?

    1. Cut the terminal bud to control the height of the palm
    2. Remove all fronds except the newest three or four
    3. Shear the crown into a rounded shape each year
    4. Remove only dead, dying, or damaged fronds, leaving green fronds attached Correct answer.

    Explanation

    Green fronds are the palm's photosynthetic factory and should be retained; removing them starves the palm and can produce a constricted pencil-top trunk. Only dead or damaged fronds and, as needed, fruit and flower stalks should be removed.

  118. Question 118Pruning and Tree Support Systems

    Which description best matches crown thinning as defined in pruning standards?

    1. Removing the lowest branches to provide clearance above a walkway or street
    2. Removing only dead, diseased, and broken branches from throughout the crown
    3. Cutting back the entire top of the tree to reduce its overall height
    4. Removing selected live branches to improve light and air flow while keeping the crown's shape Correct answer.

    Explanation

    Thinning removes a limited portion of live interior branches to improve light and air penetration without changing the tree's overall form. Cleaning removes dead or diseased wood, and reducing height is crown reduction.

  119. Question 119Pruning and Tree Support Systems

    Which statement best reflects recommended pruning timing for most trees?

    1. Light pruning can be done most times of year; heavier pruning is best done in late dormant season Correct answer.
    2. Trees should never be pruned during the dormant season, only when they are in full leaf
    3. All pruning should be done in mid-winter, when temperatures are reliably below freezing and pests are absent
    4. Pruning should be done only in late summer, to prevent sap from bleeding from the cuts

    Explanation

    Late dormant pruning is followed by vigorous growth and rapid wound closure, and stored reserves are at their seasonal peak. Light corrective pruning can be done whenever needed, though some species have specific disease-risk windows that override the general rule.

  120. Question 120Pruning and Tree Support Systems

    What is the function of the branch protection zone at the base of a live branch?

    1. It is the swollen ridge of tissue found only along the underside of the branch union
    2. It develops only after the branch dies, when decay fungi begin to colonize the stub
    3. It is chemically altered wood that resists the spread of decay into the parent stem Correct answer.
    4. It carries most of the water and dissolved minerals from the parent stem into the branch

    Explanation

    The branch protection zone is a region of chemically altered wood and specialized tissue at the branch base that limits the spread of decay into the parent stem. Preserving it is the reason for cutting just outside the branch collar.

  121. Question 121Pruning and Tree Support Systems

    In the CODIT model of tree defense, which barrier forms first at a wound?

    1. A wall of dense latewood formed in the current growth ring
    2. A barrier formed by the rays running radially outward from the wound
    3. Vessels plugged with tyloses and gums above and below the wound Correct answer.
    4. A layer of woundwood produced by the cambium around the wound

    Explanation

    The first wall is formed by plugging of xylem vessels above and below the wound, which limits vertical spread of pathogens. Later walls form in the inward wood, in the rays, and finally as new woundwood from the cambium.

  122. Question 122Pruning and Tree Support Systems

    How does a heading cut differ from a reduction cut?

    1. A heading cut is made without a lateral large enough to take over, so it usually triggers many vigorous sprouts Correct answer.
    2. A heading cut removes the branch collar, while a reduction cut leaves the collar intact and undamaged
    3. A heading cut is made only on dead wood, while a reduction cut is used on living branches of any size
    4. A heading cut removes only the current year's terminal bud, while a reduction cut removes a whole scaffold limb

    Explanation

    A reduction cut is made to a lateral branch large enough to assume apical dominance, so the cut end stays in proportion and few sprouts form. A heading cut ignores laterals and cuts through the stem, releasing latent buds and producing a cluster of vigorous shoots.

  123. Question 123Pruning and Tree Support Systems

    A co-dominant union with included bark is structurally weak primarily because:

    1. Bark trapped between the stems prevents wood from forming a continuous connection Correct answer.
    2. Included bark unions always contain decay fungi from the moment the union forms
    3. The union angle is so wide that the two stems cannot brace against each other under load
    4. Included bark develops only on branches smaller than one inch in diameter, which are too weak to support

    Explanation

    When bark is trapped between two stems, no continuous wood fibers connect them, so the union depends on a weak bark-to-bark attachment. Such unions often fail under snow or wind loads, and cabling or removal may be needed.

  124. Question 124Pruning and Tree Support Systems

    After a storm breaks branches in a tree's crown, what is the best approach to restoration pruning?

    1. Top every remaining leader to the same height so the crown regrows as a symmetrical dome of even branching
    2. Apply wound dressing to all broken ends and leave the stubs in place so they can sprout new shoots
    3. Remove every branch that shows any wound, even when the branch is structurally sound and well attached
    4. Make clean reduction cuts back to suitable laterals, removing torn stubs, and spread the work over several years if needed Correct answer.

    Explanation

    Restoration pruning removes broken and torn stubs with clean reduction cuts to laterals large enough to assume dominance, and it may be spread over several years so the tree is not over-pruned. Topping and stub leaving produce weak, sprouty regrowth.

  125. Question 125Diagnosis and Plant Health Care

    When diagnosing a tree problem, what should an arborist establish first?

    1. The replacement cost of the tree
    2. Host identity and symptom pattern Correct answer.
    3. The specific pesticide product to apply
    4. The age of nearby buildings

    Explanation

    Diagnosis starts with accurate host identification and a map of where symptoms occur, because host susceptibility and distribution narrow the possible causes. Treatment choices should follow identification of the cause.

  126. Question 126Diagnosis and Plant Health Care

    A symptom pattern that appears uniformly on all leaves exposed to a recent heat wave is most characteristic of:

    1. an abiotic disorder Correct answer.
    2. an insect pest with a trailing edge
    3. an infectious disease spreading from a point source
    4. a soil-borne root pathogen

    Explanation

    Abiotic disorders commonly affect tissues uniformly according to exposure, whereas biotic agents often produce irregular patterns, signs, or spread from a source. Heat injury follows the exposed side of the plant.

  127. Question 127Diagnosis and Plant Health Care

    The disease triangle requires a susceptible host, a pathogen, and:

    1. a pollinating insect population
    2. a favorable environment Correct answer.
    3. a pesticide application schedule
    4. a soil pH above neutral

    Explanation

    Disease develops only when a susceptible host, a pathogen, and favorable environmental conditions coincide. Time is sometimes added as a fourth factor.

  128. Question 128Diagnosis and Plant Health Care

    In integrated pest management, the pest population level at which action should be taken to prevent unacceptable damage is called the:

    1. action threshold Correct answer.
    2. host resistance
    3. biotic potential
    4. carrying capacity

    Explanation

    The action threshold is the pest density at which control is warranted to prevent unacceptable damage. It is a decision point in IPM, not a measure of reproductive capacity or host trait.

  129. Question 129Diagnosis and Plant Health Care

    Interveinal chlorosis on older leaves with green veins is most characteristic of which deficiency?

    1. iron deficiency
    2. calcium deficiency
    3. boron deficiency
    4. magnesium Correct answer.

    Explanation

    Magnesium is mobile in the plant, so deficiency symptoms appear first on older leaves as interveinal chlorosis. Iron, calcium, and boron are relatively immobile and typically show symptoms on new growth.

  130. Question 130Diagnosis and Plant Health Care

    Which soil condition most directly limits root respiration and water infiltration in urban soils?

    1. compaction Correct answer.
    2. high organic matter
    3. neutral pH
    4. coarse texture

    Explanation

    Compaction collapses soil pores, reducing oxygen movement and water infiltration into the root zone. High organic matter and coarse texture generally improve aeration and drainage.

  131. Question 131Diagnosis and Plant Health Care

    Typical symptoms of herbicide injury from a growth-regulator herbicide include:

    1. leaf curling and twisting Correct answer.
    2. small holes in leaves
    3. uniform necrosis of older leaves
    4. white powdery coating

    Explanation

    Growth-regulator herbicides disrupt cell growth and produce epinasty, curling, twisting, and distorted leaves. Uniform necrosis, shot holes, or powdery coatings point to other causes.

  132. Question 132Diagnosis and Plant Health Care

    The primary purpose of regular scouting in a plant health care program is to:

    1. replace soil testing
    2. eliminate the need for pruning
    3. guarantee pest-free trees
    4. detect problems early Correct answer.

    Explanation

    Scouting detects changes in pest or disease populations early enough to make targeted management decisions. It supplements other practices rather than replacing soil tests or pruning.

  133. Question 133Diagnosis and Plant Health Care

    Girdling roots are most likely to be diagnosed by:

    1. excavating the root flare Correct answer.
    2. measuring annual ring width
    3. counting branch whorls
    4. testing leaf color in autumn

    Explanation

    Girdling roots often cross the root flare and compress trunk tissue, so root collar excavation is needed to see them. Leaf color, branch whorls, and ring width do not reveal circling roots at the trunk.

  134. Question 134Diagnosis and Plant Health Care

    Bacterial leaf scorch is best confirmed by:

    1. a count of fallen leaves
    2. petiole tissue testing Correct answer.
    3. a soil pH test
    4. observation of powdery growth

    Explanation

    Bacterial leaf scorch mimics abiotic scorch, so laboratory testing of petiole tissue for the bacterium is used for confirmation. Soil pH and leaf counts do not confirm the pathogen.

  135. Question 135Diagnosis and Plant Health Care

    Anthracnose on shade trees typically causes:

    1. white powdery spots on new growth
    2. orange pustules on bark
    3. root rot and wilting
    4. vein lesions and twig cankers Correct answer.

    Explanation

    Anthracnose fungi cause irregular necrotic lesions, often along leaf veins, and may produce twig cankers. Powdery spots, rust pustules, and root rot indicate other pathogens.

  136. Question 136Diagnosis and Plant Health Care

    Powdery mildew is favored by:

    1. waterlogged soil
    2. freezing temperatures
    3. high humidity, dry leaves Correct answer.
    4. free water on leaves for 24 hours

    Explanation

    Powdery mildew fungi germinate under high humidity but generally do not require free water on leaf surfaces. Prolonged leaf wetness and waterlogged soil favor other diseases.

  137. Question 137Diagnosis and Plant Health Care

    Which symptom is characteristic of emerald ash borer infestation?

    1. D-shaped exit holes on ash trunks Correct answer.
    2. leaf galls on oaks
    3. large round exit holes on conifers
    4. white fluffy wax on twigs

    Explanation

    Emerald ash borer larvae feed in the cambium of ash, and adults leave D-shaped exit holes when they emerge. Large round holes, white wax, and oak galls indicate other organisms.

  138. Question 138Diagnosis and Plant Health Care

    Spider mite damage on evergreens often appears as:

    1. distorted new growth
    2. stippling and webbing Correct answer.
    3. slimy black patches on bark
    4. large, irregular chewed holes

    Explanation

    Spider mites pierce plant cells and remove contents, creating stippling, and heavy infestations produce fine webbing. Chewed holes and slimy patches indicate other pests or disorders.

  139. Question 139Diagnosis and Plant Health Care

    A reliable sign of armored scale infestation is:

    1. waxy covers on stems Correct answer.
    2. cottony wax masses
    3. ragged leaf edges
    4. honeydew and sooty mold

    Explanation

    Armored scales produce small, immobile waxy covers on stems or leaves. Honeydew and sooty mold are more typical of soft scales and aphids, while ragged edges indicate chewing damage.

  140. Question 140Diagnosis and Plant Health Care

    Raising soil pH is usually accomplished by applying:

    1. gypsum
    2. aluminum sulfate
    3. ground limestone Correct answer.
    4. elemental sulfur

    Explanation

    Ground limestone neutralizes soil acidity and raises pH. Elemental sulfur and aluminum sulfate lower pH, while gypsum generally does not change pH substantially.

  141. Question 141Diagnosis and Plant Health Care

    The most reliable basis for a tree fertilization recommendation is:

    1. the color of the bark
    2. soil and foliar tests Correct answer.
    3. the tree's height alone
    4. the number of branches

    Explanation

    Fertilization should be based on diagnosed nutrient deficiency from soil and foliar tests. Tree height, branch number, and bark color do not reveal nutrient status.

  142. Question 142Diagnosis and Plant Health Care

    A tree with vascular wilt caused by Verticillium typically shows:

    1. uniform new growth on all branches
    2. round leaf spots
    3. white powdery leaves
    4. one-sided wilting Correct answer.

    Explanation

    Verticillium plugs xylem vessels and often causes flagging, one-sided wilting, or scattered branch death. Uniform growth, powdery leaves, and round leaf spots point to other problems.

  143. Question 143Diagnosis and Plant Health Care

    A canker is best described as:

    1. a leaf spot disease
    2. a type of insect gall
    3. a root disease only
    4. localized bark death Correct answer.

    Explanation

    A canker is a localized necrotic lesion of bark and cambium, often sunken or discolored. It is not defined as a root disease, leaf spot, or insect gall.

  144. Question 144Diagnosis and Plant Health Care

    The presence of conks or mushrooms on a tree trunk most directly indicates:

    1. internal decay Correct answer.
    2. a nutrient deficiency
    3. herbicide injury
    4. active root grafting

    Explanation

    Conks and mushrooms are fruiting bodies of wood-decay fungi and indicate internal decay. Nutrient deficiency, root grafting, and herbicide injury do not produce these structures.

  145. Question 145Diagnosis and Plant Health Care

    Repeated use of the same mode-of-action insecticide is most likely to:

    1. increase pest genetic diversity rapidly
    2. prevent all future pest outbreaks
    3. select for resistant pest populations Correct answer.
    4. eliminate all natural enemies permanently

    Explanation

    Repeated exposure to one mode of action imposes selection pressure, allowing resistant individuals to survive and reproduce. Resistance management rotates modes of action and integrates nonchemical controls.

  146. Question 146Diagnosis and Plant Health Care

    Classical biological control of an invasive pest typically involves:

    1. increasing fertilizer applications
    2. applying a broad-spectrum insecticide
    3. releasing a host-specific enemy Correct answer.
    4. planting resistant cultivars only

    Explanation

    Classical biological control introduces and establishes a specialized natural enemy from the pest's native range. It is not a broad-spectrum spray, a cultivar-only strategy, or a fertilizer practice.

  147. Question 147Diagnosis and Plant Health Care

    Which combination best distinguishes Phytophthora root rot from drought stress?

    1. yellowing only on new leaves
    2. dark, rotted roots in moist soil Correct answer.
    3. leaf drop after frost
    4. wilting that improves after watering

    Explanation

    Phytophthora attacks roots and the crown, producing dark, necrotic tissue even when soil moisture is adequate. Drought-stressed roots may be dry and brittle but are not rotted.

  148. Question 148Diagnosis and Plant Health Care

    Symptoms of virus infection in trees most often include:

    1. uniform wilting at midday
    2. mosaic and distortion Correct answer.
    3. white powdery growth
    4. large cankers on the trunk

    Explanation

    Viruses are systemic and often cause mosaic, ring spots, stunting, and distorted growth. Powdery growth and trunk cankers point to fungal or other agents.

  149. Question 149Diagnosis and Plant Health Care

    A tree showing dieback, small leaves, and poor growth over several years is best evaluated by:

    1. testing only for one leaf disease
    2. applying a pesticide immediately
    3. removing all dead branches at once
    4. assessing site and root factors Correct answer.

    Explanation

    Decline is usually the result of interacting predisposing, inciting, and contributing factors. A broad evaluation of site, roots, and management history is needed before treatment.

  150. Question 150Tree Risk Assessment and Management

    In tree risk assessment, risk is best described as which of the following?

    1. The probability that the tree will be scheduled for removal within one year
    2. The number of visible defects divided by the tree's remaining useful life
    3. The product of likelihood of failure, likelihood of impact, and consequence Correct answer.
    4. The total cost of repairs if the tree or its parts were to be damaged

    Explanation

    Risk combines three elements: how likely a part is to fail, how likely it is to strike a target, and how severe the outcome would be. A defect by itself is not a risk; it only becomes one when the other elements are present.

  151. Question 151Tree Risk Assessment and Management

    Which of the following best defines a target in tree risk assessment?

    1. The specific tree part judged most likely to break away first
    2. A person, property, or activity that could be struck by a falling tree part Correct answer.
    3. Any tree on a property that is scheduled for pruning work
    4. The minimum distance a tree must be planted from a building

    Explanation

    A target is anything of value that occupies the area where a tree part could land, such as people, vehicles, structures, or utility lines. Without a target in the fall zone, the likelihood of impact is negligible.

  152. Question 152Tree Risk Assessment and Management

    A Level 1 (limited visual) tree assessment is best described as which of the following?

    1. A complete inventory that assigns a numeric risk rating to every tree
    2. A rapid walk-by or drive-by inspection looking for obvious defects and targets Correct answer.
    3. A climbing inspection of every major branch union in the crown
    4. An inspection in which the lower trunk is drilled to measure decay

    Explanation

    Level 1 assessment is a fast visual scan from a distance, intended to flag trees that need a closer look. It uses no tools and does not produce detailed risk ratings for individual trees.

  153. Question 153Tree Risk Assessment and Management

    What does included bark at a codominant union indicate?

    1. Bark is trapped between the stems, creating a weak attachment that may split Correct answer.
    2. The union formed because the tree was pruned incorrectly
    3. The union is unusually strong because the bark adds thickness
    4. The tree has already compartmentalized decay within the union

    Explanation

    When codominant stems grow too close together, bark becomes trapped in the crotch and no woody connection forms between them. The union is structurally weak and prone to splitting under wind or snow load.

  154. Question 154Tree Risk Assessment and Management

    The presence of a fungal conk on the trunk of a living tree most directly indicates which of the following?

    1. The tree is suffering from a nutrient deficiency
    2. Decay is present in the wood behind the conk Correct answer.
    3. The tree has been struck by lightning in the past
    4. The outer bark is growing faster than the inner wood

    Explanation

    A conk is the fruiting body of a wood-decay fungus, and it emerges where the fungus has colonized and degraded wood. Its presence confirms decay even when the bark surface still looks intact.

  155. Question 155Tree Risk Assessment and Management

    A large dead limb overhangs a public sidewalk. Which action most directly reduces the risk it poses?

    1. Wrapping the limb with a steel cable
    2. Removing the dead limb Correct answer.
    3. Applying wound dressing to the pruning stub
    4. Fertilizing the tree to stimulate new growth

    Explanation

    Dead wood loses strength and flexibility, so removing the limb eliminates the defective part entirely. Removal is the most reliable mitigation when the wood is already dead.

  156. Question 156Tree Risk Assessment and Management

    A tree has a large cavity, but it stands in an unvisited woodland far from any trail or structure. How does this affect the risk rating?

    1. The risk cannot be rated without drilling the trunk
    2. The risk stays high because the cavity is large
    3. The risk is high because cavities always cause immediate failure
    4. The risk is low because there is no target to be struck Correct answer.

    Explanation

    Risk requires a target as well as a defective tree. With nothing in the fall zone, the likelihood of impact is negligible, so the overall risk rating is low even though the defect is real.

  157. Question 157Tree Risk Assessment and Management

    In tree risk terminology, failure refers to which of the following?

    1. A tree declining in vigor over several growing seasons
    2. The death of the cambium on one side of the trunk
    3. The breaking or detachment of a tree part so it can no longer support itself Correct answer.
    4. A tree's inability to close a pruning wound with woundwood

    Explanation

    Failure means a structural break: a branch, stem, or root giving way and the part falling or hanging. Decline, wounds, and localized cambial death are conditions that may raise the likelihood of failure but are not failures themselves.

  158. Question 158Tree Risk Assessment and Management

    A bench is moved out from under a defective tree and relocated beyond the fall zone; the tree itself is not altered. Which risk component is most directly reduced?

    1. Likelihood of impact Correct answer.
    2. Rate of wood decay
    3. Likelihood of failure
    4. Tree vigor

    Explanation

    Removing the target from the fall zone reduces the chance that a failing part would strike something. The tree's structural condition, vigor, and decay rate are unaffected by where the bench sits.

  159. Question 159Tree Risk Assessment and Management

    A Level 2 (basic) assessment typically includes which of the following?

    1. An aerial inspection of the upper crown from a bucket truck
    2. Pull testing to measure the anchorage of the root plate
    3. A full visual inspection from the ground, including the root collar Correct answer.
    4. Resistance drilling of every major scaffold limb

    Explanation

    A basic assessment is a complete visual walk-around from the ground, with close attention to the root flare, trunk, scaffold limbs, and crown. It relies on visual observation rather than specialized diagnostic equipment.

  160. Question 160Tree Risk Assessment and Management

    Which device uses stress waves to build a two-dimensional image of internal decay in a standing tree?

    1. Mallet and sounding rod
    2. Increment borer
    3. Sonic tomograph Correct answer.
    4. Resistograph

    Explanation

    A sonic tomograph sends stress waves between sensors around the trunk and reconstructs a cross-sectional image from the travel times. Decayed wood transmits the waves more slowly, revealing zones of degraded wood.

  161. Question 161Tree Risk Assessment and Management

    Which combination of conditions most increases the likelihood of windthrow in a mature tree?

    1. A history of light annual removal of deadwood
    2. Saturated soil, recent root severance on the windward side, and a dense crown Correct answer.
    3. Deep, well-drained soil with a well-developed taproot
    4. A narrow crown carried on a short, thick trunk

    Explanation

    Windthrow occurs when wind load exceeds anchorage. Wet soil weakens root-soil cohesion, severed roots remove holding power, and a dense crown increases the sail area catching the wind.

  162. Question 162Tree Risk Assessment and Management

    Which field sign most suggests that a stem-girdling root is present?

    1. A flattened or missing root flare on one side, with a root crossing the buttress Correct answer.
    2. Epicormic shoots sprouting on the lower trunk
    3. Sap flowing from an old pruning wound
    4. A cavity on the north side of the trunk

    Explanation

    Girdling roots encircle or press against the trunk below the soil line, often leaving one side of the flare sunken or absent. Exposing the flare and tracing the root confirms the diagnosis.

  163. Question 163Tree Risk Assessment and Management

    The critical root zone of a tree is commonly estimated using which radius?

    1. A fixed radius of 1 m for every tree regardless of size
    2. About 30 cm of radius per 2.5 cm of trunk diameter Correct answer.
    3. A radius equal to the total height of the tree
    4. A radius equal to twice the crown spread

    Explanation

    A widely used field guide sets the critical root zone at roughly 1 foot of radius per inch of trunk diameter, which is about 30 cm per 2.5 cm of DBH. Larger trees therefore require proportionally larger protection areas.

  164. Question 164Tree Risk Assessment and Management

    A codominant union with included bark has been cabled. What is the most appropriate additional treatment?

    1. Fill the crotch with concrete to support the union
    2. Do nothing further, because the cable removes the need for pruning
    3. Thin the outer crown heavily to reduce weight
    4. Reduce or remove one stem so the remaining stem can dominate Correct answer.

    Explanation

    Cables limit how far stems can spread apart but do not strengthen the weak union itself. Reduction or removal of one stem changes the architecture so the tree can form a stronger single leader.

  165. Question 165Tree Risk Assessment and Management

    A tree is rated high risk and its target is occupied every day. What reinspection interval is most appropriate?

    1. Within a year or less, with interim mitigation considered Correct answer.
    2. Once every ten years
    3. No further inspection is needed once a rating has been assigned
    4. Once every five years

    Explanation

    High risk paired with frequent occupancy calls for the shortest reinspection interval, and interim measures should be considered while the tree remains in place. Risk ratings describe a moment in time and change as the tree and site change.

  166. Question 166Tree Risk Assessment and Management

    A tree forms a roll of woundwood around the margins of an injury. What does this indicate?

    1. The tree will fail at the wound within a few years
    2. The decay behind the wound has been permanently sealed off
    3. The tree is actively compartmentalizing the injury and growth continues Correct answer.
    4. The wound has healed completely and decay can no longer occur

    Explanation

    Woundwood shows that the cambium is alive and producing new tissue around the injury, a sign of an active response. It closes the wound over time but does not restore the original wood or guarantee that decay has stopped.

  167. Question 167Tree Risk Assessment and Management

    A long horizontal limb extends over a street. Which pruning approach best reduces the load at its union with the trunk?

    1. Removing all epicormic shoots along the limb
    2. Heading cuts at the tip to encourage dense regrowth
    3. Crown reduction that shortens the limb back to a suitable lateral branch Correct answer.
    4. Thinning interior branches along the length of the limb

    Explanation

    Reducing the length of the limb decreases the lever arm and the bending moment at the union. Cuts made back to a lateral branch that can assume the terminal role leave the limb shorter and lighter at its far end.

  168. Question 168Tree Risk Assessment and Management

    Roots are severed on one side of a tree to install a trench within the critical root zone. What is the most likely consequence?

    1. No effect, provided the trench is shallower than 1 m
    2. Increased resistance to windthrow on the cut side
    3. Rapid replacement of structural roots within one season
    4. Reduced anchorage and greater likelihood of failure toward the cut side Correct answer.

    Explanation

    Structural roots on the cut side lose their hold on the soil, so the tree's anchorage is weakened in that direction. The effect is greatest when the cut is close to the trunk and removes a large share of the root plate.

  169. Question 169Tree Risk Assessment and Management

    When a trunk is struck with a mallet, a distinctly hollow or dull sound most likely indicates which of the following?

    1. A fungal conk on the opposite side of the trunk
    2. Sound wood that is strongly compartmentalized
    3. Internal decay or a cavity behind the bark Correct answer.
    4. Treatment with a growth regulator

    Explanation

    Sound travels differently through degraded or empty wood, producing a dull or hollow tone. The test is only a rough screening tool, so a suspicious result should be confirmed with an advanced diagnostic method.

  170. Question 170Tree Risk Assessment and Management

    A defect makes failure likely within the next year, and the tree stands over a road used by school buses twice each day. Using a standard risk matrix, how should this be rated?

    1. Negligible, because buses pass the tree only twice a day
    2. High, because both likelihood of failure and consequence are high Correct answer.
    3. Low, because the defect can still be monitored
    4. Moderate, because failure has not yet occurred

    Explanation

    A matrix combines likelihood of failure with the severity of the consequence to produce a rating. When failure is likely and the target involves occupied vehicles carrying children, the resulting rating falls in the high category.

  171. Question 171Tree Risk Assessment and Management

    When assessing a trunk cavity, the t/R ratio compares remaining wall thickness to stem radius. Which statement about this ratio is correct?

    1. The ratio applies only to coniferous species
    2. A low t/R means the wall is thick and the stem is strong
    3. A t/R of 0.3 or less suggests significant strength loss Correct answer.
    4. A t/R above 1.0 shows that the stem is hollow

    Explanation

    The ratio expresses how much sound wall remains relative to stem size, and values at or below roughly 0.3 flag a potentially serious loss of strength. Such trees warrant advanced assessment and careful consideration of mitigation.

  172. Question 172Tree Risk Assessment and Management

    Which statement about compartmentalization in trees is correct?

    1. Trees heal wounds by regenerating wood identical to the original tissue
    2. Compartmentalization takes place only in the outer bark layers
    3. It slows the spread of decay but does not eliminate it, and varies by species Correct answer.
    4. Compartmentalization always eliminates decay fungi from the tree

    Explanation

    Trees respond to injury by forming boundaries that restrict the movement of decay organisms and water. The process slows deterioration rather than reversing it, and its effectiveness differs markedly among species and individual trees.

  173. Question 173Tree Risk Assessment and Management

    An arborist inspects a tree, documents a serious defect, and recommends removal, but the client refuses. What is the most appropriate professional action?

    1. Record the finding and advice in writing and retain the record Correct answer.
    2. Report the client to the local authority and take no other action
    3. Consider the matter closed because the decision belongs to the client
    4. Remove the tree without consent because public safety overrides ownership

    Explanation

    The arborist's duty is to identify and communicate risk clearly and to keep a defensible record of the inspection, recommendation, and client response. Acting without consent or abandoning the record leaves both the arborist and the public exposed.

  174. Question 174Tree Risk Assessment and Management

    A mature tree now leans about 15 degrees. Which observation best indicates the lean is recent and the tree may be unstable?

    1. The trunk has grown vertical wood above the lean to correct its form
    2. The crown is evenly distributed around the circumference of the trunk
    3. A gentle basal sweep covered by normal, unbroken bark
    4. Cracked, heaved soil at the root plate with no reaction wood Correct answer.

    Explanation

    Recent movement of a root plate disturbs the soil surface, producing cracks, mounds, or heaving on one side. A tree that has leaned for years typically shows reaction wood and straightened growth above the lean instead.

  175. Question 175Safe Work Practices and Urban Forestry

    Which standards designation on a climbing helmet indicates that it has been tested and rated for industrial head protection?

    1. NFPA 1977
    2. ANSI Z87.1
    3. ASTM F2413
    4. ANSI Z89.1 Correct answer.

    Explanation

    Industrial head protection in the United States is covered by ANSI Z89.1, which assigns Type and Class ratings for impact and electrical performance. Arborists working aloft should wear a helmet marked to that standard, with a chin strap secured. ANSI Z87.1 addresses eye and face protection, not helmets.

  176. Question 176Safe Work Practices and Urban Forestry

    Material bridges in the feed chute of a disc chipper and the engine is still running. What is the correct procedure?

    1. Rock the material loose with a boot while feeding continues
    2. Reach into the chute with a short stick while the disc is turning
    3. Shut the machine down and wait for the disc to stop before clearing Correct answer.
    4. Have a second worker reverse the feed rollers while you reach in

    Explanation

    The feed chute and disc area of a chipper must never be entered or reached into while any part is moving, because a rotating disc or drum can draw a hand or clothing in faster than a person can react. The accepted practice is to stop the engine, wait for all motion to cease, and only then clear the jam with a suitable tool. A push paddle or stick may be used to guide material only while feeding, never to clear a blockage.

  177. Question 177Safe Work Practices and Urban Forestry

    A felling crew clears a retreat path before making the back cut. At what angle from the intended line of fall should that path run?

    1. Straight back, directly opposite the direction of fall
    2. Diagonally backward at 135 degrees from the line of fall
    3. About 90 degrees from the line of fall
    4. About 45 degrees from the line of fall Correct answer.

    Explanation

    The escape path is cleared diagonally away from the stump at roughly 45 degrees to the intended direction of fall, giving the sawyer distance and lateral offset. Walking directly backward keeps the sawyer in the butt-swing and kickback zone. The path must be cleared of brush and tripping hazards before any cuts are made.

  178. Question 178Safe Work Practices and Urban Forestry

    Before stump grinding or planting pits are excavated in a municipal right-of-way, the crew should take which step first?

    1. Notify adjacent property owners in writing and post the notice on site
    2. Call the one-call notification service to have buried lines marked Correct answer.
    3. Schedule the work for a period of at least three consecutive dry days
    4. Photograph the entire work area to document pre-existing conditions

    Explanation

    Excavation in a right-of-way can strike gas, electric, water, or communications lines that are often shallower than expected. The one-call notification service must be contacted within the timeframe required by state law so utilities can mark their facilities before digging begins. Hand-digging near marks and respecting the tolerance zone around them follows marking.

  179. Question 179Safe Work Practices and Urban Forestry

    A four-foot-wide planting strip between the curb and sidewalk is to receive a street tree. Which choice best fits the site?

    1. A weeping willow for quick screening of the street
    2. A columnar cultivar with a mature crown about 10 feet wide Correct answer.
    3. A bur oak to maximize the canopy the block receives
    4. A silver maple selected for its fast growth rate

    Explanation

    Matching mature crown spread and root volume to the available space prevents sidewalk lifting, utility conflicts, and repeated heavy pruning later. A narrow-crowned cultivar whose mature width stays well inside the strip is the appropriate selection for this constrained site. Large-spreading and surface-rooting species need far more soil volume and clearance than four feet allows.

  180. Question 180Safe Work Practices and Urban Forestry

    For tree protection during construction, the critical root zone is commonly estimated as extending outward from the trunk to a radius equal to which measure?

    1. One-half the total height of the tree
    2. The height to the lowest permanent branch
    3. One foot of radius per inch of trunk diameter Correct answer.
    4. Twice the radius of the live crown

    Explanation

    The widely used field rule sets the critical root zone radius at about one foot for every inch of trunk diameter measured at breast height. This defines the area within which excavation, grade change, and compaction should be avoided or mitigated. Other formulas exist, but the diameter-based rule is the most common basis for protection zones on plans.

  181. Question 181Safe Work Practices and Urban Forestry

    An extension ladder is used to reach a work level 16 feet above the ground. How far should the ladder base be set out from the tree or structure?

    1. About one foot out for every four feet of working height Correct answer.
    2. About one foot out for every two feet of working height
    3. About four feet out for every four feet of working height
    4. About two feet out for every four feet of working height

    Explanation

    The setup rule sets the base one-quarter of the working length away from the top support, so a 16-foot reach calls for roughly four feet of setback. The ladder should also extend about three feet above the landing point and be secured against movement. Arborists should treat a ladder as access only, not as a work platform for chain saw use.

  182. Question 182Safe Work Practices and Urban Forestry

    A crew is exposed to high noise levels from a chipper and chain saws all day. Which control should be considered first in a hearing conservation hierarchy?

    1. Shorten the workday during high-volume chipping jobs
    2. Purchase or enclose equipment to reduce noise at the source Correct answer.
    3. Issue hearing protectors to everyone on the crew
    4. Rotate operators so no one is exposed for a full shift

    Explanation

    Hazard control follows a hierarchy that favors eliminating or reducing the hazard at its source before relying on worker-level measures. Engineering controls such as quieter equipment, enclosures, and improved mufflers reduce exposure for everyone without depending on individual behavior. Hearing protection and administrative limits are fallback layers used when source reduction cannot bring exposure below the limit.

  183. Question 183Safe Work Practices and Urban Forestry

    An arborist working aloft with a chain saw uses both a climbing line and a work-positioning lanyard. What attachment practice is required?

    1. Tie in above the cut only when the limb is larger than six inches
    2. Attach the climbing line and the lanyard to the same single anchor point
    3. Use whichever of the two is more comfortable for the cut at hand
    4. Maintain two points of attachment to the tree while the saw is running Correct answer.

    Explanation

    Two-point work positioning keeps the climber supported and oriented if one attachment fails or is momentarily released during a cut. The climbing line and the lanyard should be anchored independently so a single failure cannot drop the operator. This is a fundamental requirement whenever a chain saw is operated aloft.

  184. Question 184Safe Work Practices and Urban Forestry

    A storm has brought a limb down across an energized conductor, and one end rests on the ground. What should the crew do?

    1. Pull the limb clear with a rope from a safe distance
    2. Cut the limb free with a fiberglass pole saw
    3. Test the limb for voltage with a non-contact tester before approaching
    4. Keep everyone clear, guard the area, and call the utility Correct answer.

    Explanation

    Anything in contact with an energized conductor, including the ground around it, must be treated as energized, and voltage gradients in the soil can injure someone several feet away. Only the utility or qualified line-clearance personnel may work on the conductor or objects contacting it. The crew's role is to establish a safe perimeter and request the utility.

  185. Question 185Safe Work Practices and Urban Forestry

    What is the purpose of the chain brake on a chain saw?

    1. Stop the chain during kickback or when the hand hits the guard Correct answer.
    2. Reduce the vibration transmitted through the handles to the operator's hands
    3. Keep the bar and chain properly lubricated during long bucking cuts
    4. Lock the chain in place while the saw is being carried between cutting jobs

    Explanation

    The inertial or manual chain brake stops chain rotation almost instantly when kickback occurs or the operator's hand is driven against the front hand guard. Stopping the chain in that moment is the main defense against a kickback injury to the face or arm. The brake must be tested before each use and kept functional.

  186. Question 186Safe Work Practices and Urban Forestry

    A climber is rigging down a large limb while a ground worker tends the lowering line. Where should the ground worker stand?

    1. Against the trunk, so the piece can be pushed away on landing
    2. Outside the drop zone with a planned escape route Correct answer.
    3. Directly beneath the piece, guiding it by hand into the landing zone
    4. Inside the drop zone, holding the tail of the rigging line clear

    Explanation

    The ground worker must stay clear of the drop zone, with an identified escape route in case the piece swings, the rigging fails, or the load shifts. Communication between climber and ground worker should be established before the cut so the piece can be controlled from a safe position. Working under a suspended load is never acceptable.

  187. Question 187Safe Work Practices and Urban Forestry

    What should be done with a rigging sling before each use?

    1. Inspect it for damage and remove it from service if defective Correct answer.
    2. Retire it after twelve months regardless of its condition
    3. Proof-load it to twice its working load limit
    4. Load it at its breaking strength rather than its working load limit

    Explanation

    Slings must be inspected before each use for cuts, glazing, abrasion, broken fibers, heat damage, and legible identification tags. Any sling showing damage that could reduce strength must be taken out of service and destroyed or tagged out. Inspection is condition based; calendar retirement alone is not the criterion.

  188. Question 188Safe Work Practices and Urban Forestry

    A crew member on a hot day becomes confused, stops sweating, and has hot, dry skin. What is the correct response?

    1. Give cold water and let the worker drive home alone
    2. Call emergency services and begin active cooling at once Correct answer.
    3. Have the worker rest for ten minutes, then resume lighter work
    4. Give salt tablets and have the worker sit in the truck

    Explanation

    Confusion with hot, dry skin indicates heat stroke, a medical emergency in which the body's cooling system has failed. Emergency services must be summoned immediately while the worker is moved to shade and cooled with water, ice packs, and fans. Delay or self-transport increases the risk of permanent injury or death.

  189. Question 189Safe Work Practices and Urban Forestry

    What is the purpose of a job hazard analysis conducted before a tree care task?

    1. Set the production rate expected for the day's work
    2. Confirm that the client has signed the work contract
    3. Document the crew's hours for the payroll record
    4. Identify the hazards in each task step and the controls to be used Correct answer.

    Explanation

    A job hazard analysis breaks the work into steps and, for each step, names the hazards and the controls that will be applied before the job starts. It is a planning and communication tool, typically reviewed with the whole crew on site. It does not replace permits, contracts, or production planning.

  190. Question 190Safe Work Practices and Urban Forestry

    A property owner asks the crew to remove a large, healthy street tree that stands in the public right-of-way. Under a typical municipal tree ordinance, what is the appropriate action?

    1. Apply to the municipality; approval may require mitigation Correct answer.
    2. The adjacent owner may remove it, because they own the tree
    3. Remove it after a storm, when permit requirements are suspended
    4. No permit is needed, because the tree is on public land

    Explanation

    Public trees are held in trust by the municipality, and removal generally requires a permit or approval from the urban forestry authority. Approval is often conditioned on replacement planting or payment into a tree fund based on the size removed. A crew that removes a protected tree without authorization exposes itself and the client to penalties.

  191. Question 191Safe Work Practices and Urban Forestry

    Which method is most commonly used to estimate a community's urban tree canopy cover?

    1. Counting stumps and planting records for the whole city
    2. Point sampling high-resolution aerial or satellite imagery Correct answer.
    3. Testing soils in a random sample of residential lots
    4. Totaling the diameter at breast height of every street tree

    Explanation

    Canopy cover is a two-dimensional measure best estimated by classifying points on high-resolution imagery, a method used in tools such as i-Tree Canopy. This approach covers all land, including private property where most canopy usually sits. Stem counts and diameter tallies describe the population of inventoried trees, not the proportion of the surface shaded.

  192. Question 192Safe Work Practices and Urban Forestry

    A tree is to be planted in a paved plaza where the surface must support foot traffic. Which approach best provides root space?

    1. A raised planter box with a sealed concrete floor
    2. A deeper planting hole backfilled with amended topsoil
    3. A layer of washed gravel beneath the pavement base
    4. A structural soil or suspended pavement that resists compaction Correct answer.

    Explanation

    Structural soils and suspended pavement systems carry the load of paving while leaving uncompacted voids that roots can colonize and that support air and water movement. Simply digging deeper or using gravel layers does not provide usable rooting volume under a sealed surface. Root growth is limited by oxygen and compaction, not by depth alone.

  193. Question 193Safe Work Practices and Urban Forestry

    Two trees have an equal likelihood of failure. One leans over a playground, the other over a fenced storage yard used a few times a year. How does a standard risk assessment treat them?

    1. The playground tree carries higher risk, because the consequence is greater Correct answer.
    2. Both should be assigned risk only after the trees are removed
    3. They carry the same risk, because the likelihood of failure is equal
    4. The playground tree has lower risk, because children are lighter than adults

    Explanation

    Risk combines the likelihood of failure with the severity of the consequence, and the consequence depends on what the tree could strike and how often that target is occupied. A playground is a frequented target, so the same likelihood of failure yields a higher risk rating than an occasional-use yard. This is why target assessment is central to tree risk evaluation.

  194. Question 194Safe Work Practices and Urban Forestry

    How are the ANSI A300 tree care standards best characterized?

    1. Manufacturer specifications for pruning tools and saws
    2. Federal statutes that carry fines for noncompliance
    3. Performance standards describing accepted tree care practices Correct answer.
    4. Laboratory protocols for soil and tissue testing

    Explanation

    The A300 series sets out performance standards for practices such as pruning, fertilization, cabling, and transplanting, and it requires that work be specified by a qualified person. It describes what the outcome should be rather than prescribing a recipe for every tree. Enforcement comes through contracts, ordinances, and professional duty, not directly from the standard itself.

  195. Question 195Safe Work Practices and Urban Forestry

    A utility trench is planned 16 feet from the trunk of a 24-inch DBH tree that is to be retained. Applying the guideline of one foot of critical root zone radius per inch of trunk diameter, what should the arborist recommend?

    1. Reroute the trench outside the critical root zone or mitigate Correct answer.
    2. Proceed as planned, because the trench exceeds 12 feet from the trunk
    3. Proceed only if the tree is heavily fertilized before excavation
    4. Proceed if the trench is hand-dug to a depth of less than 24 inches

    Explanation

    The critical root zone for a 24-inch tree extends about 24 feet from the trunk, so a trench at 16 feet severs roots well inside the protected area. Trenching close to a trunk can also destabilize the tree and open it to decay. Rerouting outside the zone, or using tunneling or root-pruning mitigation under arborist supervision, is the appropriate recommendation.

  196. Question 196Safe Work Practices and Urban Forestry

    An arborist works a tree from the bucket of an aerial lift. What fall protection arrangement is appropriate?

    1. Use a full-body harness attached to the manufacturer's anchor point Correct answer.
    2. Tie off with a lanyard to the largest limb available above the bucket
    3. Use a body belt looped around the boom for added stability
    4. Rely on the bucket's guardrail as the primary fall protection

    Explanation

    Aerial lift occupants must wear a full-body harness connected to the anchor point designated by the lift manufacturer for that purpose. Tying off to the tree or to an unapproved location can load the platform in unintended directions or leave the operator unrestrained if the bucket is displaced. Guardrails alone do not protect against ejection during a boom bounce or tip-over.

  197. Question 197Safe Work Practices and Urban Forestry

    A 1,000-pound limb is lowered on a two-leg bridle where each leg makes a 30-degree angle with the horizontal and shares the load equally. What is the approximate tension in each leg?

    1. 1,000 pounds Correct answer.
    2. 577 pounds
    3. 500 pounds
    4. 2,000 pounds

    Explanation

    Each leg must carry half the vertical load, so T times the sine of 30 degrees equals 500 pounds. Because the sine of 30 degrees is 0.5, the tension in each leg is about 1,000 pounds, double the vertical share. Flatter sling angles multiply tension sharply, which is why sling angle must be considered, not just the weight of the piece.

  198. Question 198Safe Work Practices and Urban Forestry

    A municipal ordinance requires replacement at two caliper inches for every inch of trunk diameter removed. A 16-inch DBH tree is approved for removal. How many caliper inches of replacement trees are required?

    1. 8 caliper inches
    2. 32 caliper inches Correct answer.
    3. 16 caliper inches
    4. 24 caliper inches

    Explanation

    The mitigation ratio is applied to the diameter removed, so 16 inches multiplied by two equals 32 caliper inches of replacement planting. Mitigation ratios shift lost canopy replacement onto the project and are commonly scaled by the size of the tree removed. The figure is a planting requirement, not a dollar value.

  199. Question 199Safe Work Practices and Urban Forestry

    A residential street has a history of repeated conflicts between tree crowns and overhead conductors. Which strategy best reduces that conflict over time?

    1. Plant tall-growing species and prune them on a short cycle
    2. Top the trees annually to hold them at the desired height
    3. Remove the street trees and leave the block unplanted
    4. Select species whose mature height stays below the conductor zone Correct answer.

    Explanation

    Lasting reduction of conductor conflict comes from species selection at planting, choosing trees whose mature height and spread fit the available space below and beside the lines. Repeated pruning of tall species is costly, creates wounds, and must continue for the life of the tree. Topping is not an accepted practice and produces weak, hazardous regrowth.

Certified Arborist flashcards

32 cards. Read the term and the definition here. The deck at the top of this page is optional.

Vascular cambium function
The vascular cambium produces secondary xylem inward and secondary phloem outward, increasing trunk diameter; seasonal growth increments form the annual rings used to estimate tree age.
CODIT four walls
Compartmentalization of decay in trees proceeds through four walls: wall one plugs vessels, wall two forms tyloses and chemical boundaries, wall three limits radial spread, and wall four forms a barrier zone.
Opposite leaf arrangement
Opposite arrangement means leaves are paired at each node along the twig; maples, ashes, dogwoods, and buckeyes show this pattern, while most other trees are alternate.
Tension wood versus compression wood
In leaning angiosperms, tension wood forms on the upper side and pulls the stem upright; in leaning conifers, compression wood forms on the lower side and pushes the stem upward.
Field capacity definition
Field capacity is the water remaining in soil after free drainage from macropores, typically reached about two days after saturation, and it marks the upper limit of readily available water.
Soil bulk density limits
When mineral soil bulk density exceeds roughly 1.4 to 1.6 grams per cubic centimeter, pore space is reduced enough to restrict root growth, water infiltration, and gas exchange.
Soil pH and nutrient availability
Most trees take up nutrients best near pH 5.5 to 6.5; above pH 7, iron, manganese, zinc, and boron become less available, often causing interveinal chlorosis on new growth.
One inch irrigation volume
Applying one inch of water over one square foot requires about 0.62 gallons, so a 100 square foot root zone needs roughly 62 gallons to wet the soil to that depth.
Mobile versus immobile nutrients
Nitrogen, potassium, and magnesium are mobile in the plant, so deficiency appears first on older leaves; iron, calcium, and boron are immobile and show symptoms on new growth.
Fertilizer analysis N-P-K
Fertilizer analysis states the percentage by weight of nitrogen, available phosphate expressed as P2O5, and soluble potash expressed as K2O, always reported in that order.
Liebig's law of the minimum
Liebig's law states that plant growth is limited not by total resources but by whichever essential resource is in shortest supply relative to the plant's need.
Essential micronutrients for trees
The essential micronutrients are iron, manganese, zinc, copper, boron, molybdenum, chlorine, and nickel; they are required in very small amounts but can still limit growth.
Planting hole dimensions
A planting hole should be two to three times the width of the root ball but no deeper than the root ball, so the root flare sits at or slightly above grade.
Root flare placement
The root flare, where the first major roots diverge from the trunk, must sit at or slightly above the soil surface; burying it reduces oxygen and encourages girdling roots and decay.
Transplant establishment rate
A transplanted tree generally requires about one year per inch of trunk diameter to re-establish enough root growth for normal shoot extension, so aftercare continues for several years.
Bare-root planting timing
Bare-root nursery stock is planted during dormancy, when roots are fully moist and undisturbed; roots must be kept damp, shaded, and covered until planting.
Branch collar cut
A proper pruning cut is made just outside the branch bark ridge and branch collar, leaving the collar intact rather than cutting flush against the parent stem.
Three-cut pruning method
For large limbs, first make an undercut, then a top cut further out to leave a stub, then the final cut outside the branch collar to prevent bark tearing.
Live crown removal limit
Removing no more than about 25 percent of the live crown in a single season limits stress; heavier removal reduces carbohydrate production and can cause sprouting and decline.
Codominant stem risk
Codominant stems with a narrow angle and included bark form weak unions prone to splitting, because bark trapped between the stems prevents a strong shared connection.
Sign versus symptom
A sign is the visible structure of a pathogen or pest itself, such as conks, mycelium, or frass; a symptom is the plant's response, such as yellowing or wilting.
Biotic versus abiotic injury pattern
Abiotic injury usually appears uniformly on one species across a site and is symmetric on the plant; biotic injury is often random, progressive, and spreads from an epicenter.
Girdling root symptoms
Girdling roots often produce a declining, thin crown with no obvious aboveground cause, because roots encircle and compress the trunk, restricting water and carbohydrate movement.
IPM action threshold
Integrated pest management applies treatment only when a pest population is expected to exceed the level of injury that can be tolerated, rather than treating on a fixed calendar schedule.
Tree risk formula
Tree risk is calculated as the likelihood of failure multiplied by the likelihood of impacting a target, then multiplied by the consequences of that impact.
Critical root zone radius
For tree protection, the critical root zone is commonly defined as one to one and a half feet of radius per inch of trunk diameter, with a minimum radius of about ten feet.
Decay detection tools
Decay detection combines visual assessment with resistograph drilling, sonic tomography, and similar instruments; these estimate internal defect location but require trained interpretation.
Tree failure modes
The common failure modes of trees are uprooting with root plate lifting, stem or root failure at a defect, and branch failure at an included union or crack.
ANSI Z133 scope
ANSI Z133 sets the recognized safety requirements for arboricultural operations, including personal protective equipment, climbing, rigging, chippers, and electrical hazard approach distances.
Electrical minimum approach distance
Minimum approach distance from energized lines is 10 feet for lines up to 50 kilovolts, increasing with voltage; only qualified line-clearance arborists work within that distance.
Chipper infeed safety
Never place hands or feet in a chipper infeed; feed material from the side of the chute and keep the feed area clear so operators cannot be drawn into the rollers.
Drop zone requirement
A drop zone is the area beneath aerial work kept clear of all personnel except the climber, protecting ground workers from falling limbs, tools, and debris.

Certified Arborist study guide

Tree Biology and Identification

Meristems and transport

All woody growth comes from meristems. Apical meristems extend shoots and roots; the vascular cambium produces xylem inward and phloem outward; the cork cambium makes periderm. Xylem carries water and dissolved minerals upward. Phloem carries sugars from sources to sinks and can move either direction seasonally. Distinguish heartwood from sapwood, earlywood from latewood, and reaction wood (compression wood in conifers, tension wood in hardwoods).

Injury response

Compartmentalization (CODIT) describes boundary-setting after wounding: wall 1 plugs vessels, wall 2 forms a barrier ring, wall 3 is the ray barrier, and wall 4 is the new cambium that closes over the wound. Trap: trees do not heal or repair damaged tissue; they isolate it. A flush cut removes the branch collar and defeats wall 4, which is why the final cut belongs just outside the collar and branch bark ridge.

Identification

Work from arrangement, then leaf type, then twig and bud detail. Leaf arrangement is alternate, opposite, or whorled. Only a small set of common landscape genera are opposite: maples, ashes, dogwoods, horsechestnut and buckeye, catalpa, and viburnum. Then check simple versus compound leaves, leaf scars and bundle scars, terminal bud presence, bark, fruit, and form. Use a dichotomous key and correct nomenclature: genus capitalized, specific epithet lowercase, cultivar in single quotes, italicized genus and species.

Worked example

A twig with opposite leaves, a true terminal bud, and U-shaped leaf scars containing three bundle scars is an ash (Fraxinus). The same opposite arrangement with no terminal bud and V-shaped scars points to maple (Acer). Rule of thumb: opposite arrangement alone eliminates most of the woody landscape, so confirm it first before keying further.

Soil and Water Management

Physical soil

Know texture (sand, silt, clay proportions), structure (aggregation), and pore space. A productive soil is roughly half solid and half pore space, with macropores for air movement and drainage and micropores for water retention. Bulk density above roughly 1.4–1.6 g/cm³ in loam-textured soils begins to restrict root growth, and compaction collapses macropores first, so roots lose oxygen before they lose water.

Chemistry and biology

Cation exchange capacity, pH, organic matter, and the biological community (including mycorrhizae) govern nutrient supply. Organic matter improves structure, infiltration, and water-holding capacity simultaneously, which is why it is the most reliable amendment in a planting bed.

Water

Separate infiltration, percolation, field capacity, and permanent wilting point. Clay stores the most total water, but much of it is tightly held and unavailable. Irrigation should be deep and infrequent to encourage deep rooting; frequency is set by evapotranspiration and soil, not by a fixed calendar.

Traps

Light daily watering produces shallow, drought-fragile roots. Runoff does not equal infiltration; hydrophobic or compacted soils may shed water applied too fast. Wilting that recovers by evening is often midday heat stress, not drought. Mulch belongs 2–4 inches deep and pulled back from the trunk.

Worked example

One inch of water over one square foot is about 0.62 gallons. A 10 ft × 10 ft root zone (100 ft²) therefore needs roughly 62 gallons to deliver one inch. Apply that slowly enough to infiltrate, then wait until the soil dries before repeating.

Tree Nutrition and Fertilization

Elements and mobility

Know the macronutrients (N, P, K, Ca, Mg, S) and micronutrients (Fe, Mn, Zn, Cu, B, Mo, Cl, Ni). Mobility inside the plant drives symptom location: nitrogen, phosphorus, potassium, and magnesium are mobile, so deficiency appears first on older leaves; iron, calcium, boron, manganese, zinc, and copper are relatively immobile, so deficiency shows on new growth.

Availability

Soil pH controls availability more than total soil content does. Iron, manganese, and zinc become less available as pH rises; phosphorus and molybdenum become less available at low pH. Diagnose with soil test, tissue analysis, and site history together, not with a guess from leaf color alone.

Decisions

Fertilize only when a deficiency is confirmed or growth targets justify it. Do not fertilize a newly planted tree, a drought-stressed tree, or one compromised by root loss. Nitrogen drives shoot growth, not root growth, and excess nitrogen can increase succulent growth and pest susceptibility. Match the ratio to the deficiency; do not simply choose the highest analysis on the shelf.

Traps

"Deep root feeding" is a delivery method, not proof of superiority. Applying iron to a high-pH soil without acidifying or chelating may not correct chlorosis. Phosphorus applied unnecessarily risks runoff and water quality problems.

Worked example

A silver maple with interveinal chlorosis on the newest leaves while soil pH is 7.8 is showing an iron availability problem, not an iron shortage. The fix is acidification and/or chelated iron applied where roots can absorb it, then verifying with tissue testing the following season.

Tree Installation and Establishment

Stock and handling

Recognize bareroot, container, and balled-and-burlapped stock, and the handling each requires. Root ball diameter generally scales with trunk caliper (roughly 10–12 inches of ball per inch of caliper for B&B stock). Keep roots moist, shaded, and out of the wind; bareroot stock must stay dormant and never dry out.

Planting

The hole should be two to three times the root ball width but no deeper than the root ball, so the root flare sits at or slightly above grade. Backfill with the native soil; research does not support amending the backfill to improve establishment. Remove twine, cut away the top of the burlap, remove synthetic burlap entirely, and take off the top of the wire basket. Cut or straighten circling roots before backfilling.

Aftercare

Water to settle soil, mulch 2–4 inches deep and clear of the trunk, and stake only when necessary, removing support after one growing season. The establishment period is commonly estimated at about one year of attentive irrigation per inch of trunk caliper.

Traps

Planting too deep is the most common installation failure. Gravel in the bottom of a hole creates a perched water table rather than drainage. Fertilizing at planting is not recommended. Permanent staking and guying produce weak trunks. "Root-bound" container stock with girdling roots may fail years later.

Worked example

A 2-inch caliper balled-and-burlapped tree needs a hole roughly 5–6 feet wide, a setted depth that leaves the flare visible, and about two years of scheduled irrigation before it is treated as established.

Pruning and Tree Support Systems

Objectives and cuts

Pruning serves structure, clearance, health, safety, and aesthetics. Learn the cut types - removal, thinning, reduction, and heading - and the anatomy that governs them. Identify the branch bark ridge and branch collar; the final cut passes just outside the collar. For limbs too heavy to support, use the three-cut method to prevent tearing.

Standards and limits

Work is governed by the ANSI A300 pruning standard: no topping, no lion-tailing, no stub cuts, no flush cuts. Remove no more than about 25% of live crown in a single season, and less on mature or stressed trees. Young trees benefit most from structural pruning, especially where codominant stems with included bark are developing. Time pruning to avoid known pest windows - notably oaks in oak wilt regions during spring.

Support systems

ANSI A300 Part 3 covers support. Cabling and bracing (static or dynamic) reduce the chance of failure in weak unions but are not substitutes for removal. Guying is a temporary transplant aid and should come off within about one growing season.

Traps

Wound dressings and pruning paint do not prevent decay and may interfere with the tree's own defenses. Topping does not make a tree safer or shorter in the long term; it produces weak regrowth. Heading cuts and stub cuts invite decay.

Worked example

A young oak with two stems of near-equal size and included bark: subordinate one stem with a reduction cut rather than waiting. Rule of thumb: a branch less than half the trunk diameter at the union is far less likely to fail.

Diagnosis and Plant Health Care

A repeatable process

Diagnose in order: identify the plant, define what is abnormal, take a site and management history, then map the pattern of damage. Distribution matters - one tree, one species, one side, one soil type, or one irrigation zone all point to different causes. Only then examine signs and symptoms.

Signs versus symptoms

A sign is the organism itself (fruiting bodies, mycelium, insect stages, frass, honeydew); a symptom is the plant's response (chlorosis, necrosis, wilt, galls, cankers, dieback). Confusing the two is a classic exam trap.

Abiotic first

Most landscape problems are abiotic: drought, flooding, compaction, planted too deep, girdling roots, frost, sunscald, salt, herbicide drift, and mechanical injury. Insects and diseases often follow stress as secondary organisms, so treating the visible pest may not address the cause. Think in terms of the decline spiral: predisposing, inciting, and contributing factors.

Plant health care

PHC is proactive and integrated: monitoring, action thresholds, cultural and mechanical controls first, biological control where appropriate, and pesticides only when warranted and labeled. Understand modes of action and rotate among them to limit resistance.

Worked example

Three different species along one street decline together while nearby trees on another street are fine. That pattern is unlikely to be a host-specific pathogen; suspect a site factor such as deicing salt, changed drainage, or root disturbance. Rule of thumb: when unrelated species fail together, investigate the site before the pest.

Tree Risk Assessment and Management

The risk model

Risk combines three factors: likelihood of failure, likelihood of impact on a target, and consequences of that impact. A target is a person or property that would be struck. A defect with no target carries little risk regardless of how alarming it looks. Keep tree health, tree value, and tree risk as separate judgments.

Assessment levels

Expect three levels: a limited visual assessment for a population, a basic assessment with a 360-degree walk-around and simple tools, and an advanced assessment using resistograph, sonic tomography, or pulling tests. Each produces a mitigation recommendation, a residual risk, and a re-inspection interval.

Defects to recognize

Codominant stems with included bark, cracks and splits, decay detected by conks or cavities, root plate and root severance issues, soil heave, lean that has increased, dead or broken limbs, cankers, and poor taper.

Mitigation

Reduce the target whenever possible - move a bench, reroute a path, restrict parking. Then consider pruning, cabling or bracing, monitoring, or removal. Removing the tree is not the only answer and is not automatically the safest one.

Traps

Risk is not binary and does not equal hazard. A large, healthy tree may be low risk; a hollow tree with a thick sound shell may also be low risk. Do not confuse a defect's visual severity with the probability of impact.

Worked example

A cracked limb over an empty lawn versus the same limb over a playground: the defect is identical, but the risk differs because the target differs. Fix the target first.

Safe Work Practices and Urban Forestry

Regulations and PPE

Arboricultural operations follow ANSI Z133 and applicable OSHA rules. Personal protective equipment includes a helmet with chin strap, eye and hearing protection, chainsaw chaps, and sturdy boots. Inspect the tree and the work zone before climbing, and identify electrical hazards first.

Working aloft

Use a climbing line plus a work-positioning lanyard so you have two attachment points when operating a chainsaw aloft. Tie in to sound wood, above the work, and keep the system inspected. Aerial lifts require trained operators, harness attachment, and a controlled drop zone.

Electrical hazards

Respect minimum approach distances. The usual baseline is 10 feet for conductors rated up to 50 kV, increasing with voltage; only qualified line-clearance arborists may work within those distances, and the limit applies to every part of the tree, tool, or load - not just the climber's body.

Ground operations

Control the drop zone, use proper rigging, and rig within the capacity of the gear. Keep chippers fed from the side, never reach in, and keep loose clothing away from the feed.

Urban forestry

Know inventories, canopy-cover goals, tree ordinances, appraisals, and the 10-20-30 diversity rule: no more than 10% of one species, 20% of one genus, 30% of one family. "Right tree, right place" prevents most future conflicts.

Worked example

A climber must limb a branch that overhangs a 12 kV distribution line. The 10-foot minimum approach distance applies to the branch, saw, and rope, so the work requires a qualified line-clearance arborist or de-energization - not just care.

Certified Arborist cheat sheet

Quick reference

Tree Biology and Identification

  • Apical meristems at shoot and root tips produce primary growth (extension in length); the vascular cambium produces secondary xylem inward and phloem outward, adding diameter.

  • Xylem transports water and dissolved minerals upward from the roots; phloem translocates photosynthate from sources to sinks, with direction varying by season and demand.

  • CODIT walls: wall 1 = vessel plugging, wall 2 = tyloses and chemical boundaries, wall 3 = ray parenchyma restricting radial spread, wall 4 = a new suberized barrier zone.

  • Compression wood forms on the underside of leaning conifers and pushes the stem upward; tension wood forms on the upper side of leaning broadleaf trees and pulls it upright.

  • Opposite leaf arrangement occurs in maples (Acer), ashes (Fraxinus), dogwoods (Cornus), and buckeyes (Aesculus); alternate arrangement is the most common condition.

  • On a compound leaf, axillary buds occur at the base of the entire leaf, not at the base of individual leaflets; this distinguishes leaflets from twigs.

  • Monocots such as palms have scattered vascular bundles and no vascular cambium, so they do not produce annual rings or true secondary growth.

  • Roughly 60-80% of fine absorbing roots occupy the top 30 cm (12 in) of soil, and roots commonly extend 2-3 times the canopy radius.

Quick reference

Soil and Water Management

  • Soil texture is classified by percent sand, silt, and clay; a loam is approximately 40% sand, 40% silt, and 20% clay.

  • Available water capacity lies between field capacity and permanent wilting point; micropores retain this water while macropores drain freely by gravity.

  • Cation exchange capacity rises with clay content and organic matter, increasing the soil's ability to hold nutrients such as calcium, magnesium, and potassium.

  • Most trees grow best between pH 5.5 and 6.5; above pH 7, iron, manganese, zinc, and boron availability declines sharply.

  • Mineral soil bulk density above about 1.4-1.6 g/cm3 reduces pore space enough to restrict root penetration, drainage, and gas exchange.

  • Root respiration requires oxygen; below roughly 10% soil oxygen, or under prolonged saturation, water and nutrient uptake decline and fine roots die.

  • One inch of irrigation over 1 sq ft equals about 0.62 gallons, so a 100 sq ft root zone needs roughly 62 gallons to receive one inch.

  • Apply mulch 2-4 inches deep and pull it a few inches back from the trunk; deeper layers reduce oxygen diffusion into the root zone.

Quick reference

Tree Nutrition and Fertilization

  • Seventeen elements are essential: C, H, O from air and water; N, P, K, Ca, Mg, S from soil in larger amounts; Fe, Mn, Zn, Cu, B, Mo, Cl, Ni in trace amounts.

  • Liebig's law of the minimum: growth is governed by whichever essential resource is in shortest supply relative to need, not by total resource abundance.

  • Mobile nutrients (N, P, K, Mg) show deficiency symptoms on older leaves first; immobile nutrients (Fe, Ca, B, Mn) show symptoms on new growth first.

  • Fertilizer analysis N-P-K reports percent nitrogen, percent available phosphate as P2O5, and percent soluble potash as K2O, always in that order.

  • A common landscape nitrogen rate is 1-3 lb of actual N per 1,000 sq ft per year, applied within the root zone rather than near the trunk.

  • Iron chlorosis at high soil pH is addressed by acidifying soil, applying chelated iron, or using trunk/foliar treatments; adding phosphate worsens it.

  • Avoid high-nitrogen fertilization of newly planted trees during the first growing season, because it pushes shoot growth ahead of root establishment.

  • Foliar feeding corrects a deficiency quickly but temporarily; it supplements, and does not replace, correction of the underlying soil problem.

  • Mycorrhizal fungi improve phosphorus and water uptake; high soil phosphorus levels can suppress colonization.

Quick reference

Tree Installation and Establishment

  • Dig the planting hole 2-3 times the width of the root ball but no deeper than the root ball; set the root flare at or slightly above grade.

  • Remove twine, burlap, and wire basket from the top half of the root ball, and remove any material encircling the trunk entirely.

  • On container-grown stock, cut or straighten circling and kinked roots at the top and sides of the root mass before backfilling.

  • Deep planting buries the root flare and leads to girdling roots, stem decay, and chronic decline; verify flare depth after settling and irrigation.

  • Backfill with the soil removed from the hole; if soil amendment is warranted, amend the entire planting area rather than the hole alone.

  • Water immediately after planting to settle soil, then supply about 1 inch per week through the first 2-3 growing seasons when rainfall is inadequate.

  • Establishment takes roughly one year per inch of trunk diameter, during which irrigation and weed control determine survival and growth.

  • Stake only when the root ball or stem requires stabilization, use flexible ties with slack, and remove supports after one to two growing seasons.

  • Bare-root stock must be planted during dormancy with roots kept moist, shaded, and never allowed to desiccate.

Quick reference

Pruning and Tree Support Systems

  • Final cuts are made just outside the branch collar and branch bark ridge; flush cuts and stub cuts both remove or damage the tree's defense zone.

  • Use the three-cut method on limbs too large to support: an undercut, a top cut leaving a stub, then the final cut outside the collar to avoid bark tearing.

  • Remove no more than about 25% of the live crown in a single season to limit carbohydrate loss and stress.

  • When reducing a limb, cut back to a lateral at least one-third the diameter of the removed portion; heading cuts to arbitrary points trigger prolific sprouting.

  • Topping, lion's tailing, and tipping are disallowed practices under ANSI A300, the standard for tree pruning.

  • Dead, diseased, and broken wood may be removed at any time; live pruning is best scheduled in late dormant season for most species.

  • Avoid wounding oaks during spring where oak wilt occurs, because sap-feeding beetles carry the fungus to fresh wounds.

  • Static support systems limit movement at weak unions; dynamic systems allow motion. Both are designed and installed per ANSI A300 Part 3.

  • Wound dressings are not recommended; they do not prevent decay or accelerate wound closure and may trap moisture.

Quick reference

Diagnosis and Plant Health Care

  • Diagnostic order: identify the plant, examine the site and soil, gather management history, characterize the pattern and distribution of injury, then look for signs.

  • Signs are the pest or pathogen itself (conks, mycelium, frass, egg masses); symptoms are the plant's response (chlorosis, wilting, cankers, dieback).

  • Abiotic injury tends to be uniform across one species on a site and symmetric on the plant; biotic injury is often patchy, progressive, and spreads from an epicenter.

  • Root and vascular problems appear as crown dieback, reduced leaf size, and thin foliage, typically without lesions on the main stem.

  • Growth-regulator herbicide injury such as 2,4-D produces leaf cupping, strapping, and twisted, epinastic growth on broadleaf trees.

  • Koch's postulates confirm a pathogen: isolate it, culture it, inoculate a healthy host, and recover the same organism from the resulting symptoms.

  • Soil tests report pH and extractable nutrients; tissue tests compare foliar nutrient concentrations against established sufficiency ranges.

  • Integrated pest management combines monitoring, action thresholds, and cultural, biological, and chemical controls in that order of preference.

Quick reference

Tree Risk Assessment and Management

  • Risk = likelihood of failure × likelihood of impact on a target × consequences of that impact; removing any factor removes the risk.

  • Tree risk assessment levels: limited (ground-based visual), basic (360-degree inspection with simple tools), and advanced (aerial inspection, decay detection).

  • A hazard exists only when a defective tree can reach a target; with no target there is no risk, only a maintenance concern.

  • Visual tree assessment looks for cracks, conks, cavities, included bark, root plate lifting, soil mounding, and recent changes in lean.

  • Common failure modes are uprooting, stem or root failure at a defect, and branch failure at an occluded union or crack.

  • A resistograph and sonic tomography estimate the location and extent of internal decay, but results must be interpreted with species and site context.

  • Mitigation options include moving or removing the target, pruning, installing support systems, reducing load, removing the tree, or monitoring.

  • Document findings and set a re-inspection interval based on defect severity, target value, and the rate of change expected.

Quick reference

Safe Work Practices and Urban Forestry

  • ANSI Z133 establishes safety requirements for arboricultural operations, covering personal protective equipment, climbing, rigging, chippers, and electrical hazards.

  • Minimum approach distance to energized lines is 10 ft for lines up to 50 kV, increasing with voltage; only qualified line-clearance arborists work closer.

  • Required PPE includes a helmet with chin strap, eye protection, hearing protection, gloves, and chainsaw-protective chaps.

  • Climbers maintain two points of attachment, and the tie-in point must be in sound wood capable of supporting the intended load.

  • Chainsaw kickback is managed with the chain brake, a firm two-handed grip, and by avoiding the upper tip quadrant of the bar.

  • Never place hands or feet in a chipper infeed; feed from the side of the chute and keep the feed area clear of bystanders.

  • Life-support rigging components are rated with a safety factor, commonly about 10:1 for climbing systems.

  • The critical root zone for construction protection is usually 1 to 1.5 ft of radius per inch of DBH, with a 10 ft minimum, enclosed by fencing.

  • Urban forest inventories support canopy-cover goals and management plans; tools such as i-Tree quantify stormwater, energy, and air-quality benefits.

Certified Arborist key terms

CODIT

A tree's internal defense process that uses four walls of wood to slow the spread of decay fungi after wounding. It limits damage but does not heal or remove infected wood.

Related: Branch collar, Reaction wood
Branch collar

A swollen ring of tissue at the base of a branch where it joins the trunk. Proper cuts leave it intact because it contains chemicals and wood that help the tree seal the wound.

Related: Branch bark ridge, CODIT
Branch bark ridge

A raised ridge of bark running along the top of a branch union. It marks the boundary between branch and trunk wood and guides where a pruning cut should be made.

Related: Branch collar, Included bark
Included bark

Bark trapped inside a narrow branch union where two stems press together. It creates a weak attachment because wood fibers are not connected across the union, making failure more likely.

Related: Branch bark ridge, Likelihood of failure
Reaction wood

Wood formed to support leaning or unbalanced stems. In conifers it is compression wood on the lower side; in broadleaf trees it is tension wood on the upper side, and it behaves differently when cut.

Related: Structural pruning
Vessel

A water-conducting cell in the xylem of broadleaf trees. Vessels are stacked end to end to form tubes that move water and dissolved minerals from roots to leaves.

Related: Phloem
Phloem

The inner bark tissue that transports sugars made in leaves to roots, stems, and storage tissues. Damage to phloem can starve roots even when xylem water flow remains intact.

Related: Vessel, Girdling root
Cultivar

A plant variety selected and propagated by humans for desirable traits such as form, pest resistance, or fall color. Cultivar names are written in single quotes and are not the same as species.

Related: Right tree right place
Soil texture

The proportion of sand, silt, and clay particles in soil. Texture strongly affects water holding, drainage, aeration, and how easily roots can grow through the soil.

Related: Soil structure, Bulk density
Soil structure

The arrangement of soil particles into aggregates and pores. Good structure allows air, water, and roots to move through soil; compaction and tilling can break aggregates apart.

Related: Soil texture, Bulk density
Bulk density

The dry weight of soil divided by its volume, including pore space. High bulk density usually means compaction, which reduces root growth, aeration, and water movement.

Related: Soil structure, Infiltration rate
Field capacity

The amount of water soil holds after excess water has drained away by gravity. It represents the upper limit of water available to roots between irrigation or rainfall events.

Related: Infiltration rate, Soil texture
Infiltration rate

The speed at which water enters the soil surface. Slow infiltration increases runoff, erosion, and ponding, while fast infiltration may reduce water available to roots.

Related: Bulk density, Field capacity
Soil pH

A measure of soil acidity or alkalinity on a scale from 0 to 14. It affects nutrient availability and root health, with most trees growing best in slightly acidic to neutral soil.

Related: Essential nutrient, Chlorosis
Cation exchange capacity

The ability of soil particles to hold positively charged nutrient ions such as calcium, magnesium, and potassium. Higher capacity generally means soil can store more nutrients for roots.

Related: Soil texture, Essential nutrient
Essential nutrient

An element that a tree needs to complete its life cycle. Essential nutrients include macronutrients such as nitrogen, phosphorus, and potassium, and micronutrients needed in very small amounts.

Related: Fertilizer analysis, Chlorosis
Fertilizer analysis

The percentage by weight of nitrogen, available phosphate, and soluble potash in a fertilizer, shown as three numbers such as 10-10-10. It does not list other nutrients or filler.

Related: Essential nutrient
Chlorosis

Yellowing of leaves caused by insufficient chlorophyll. It often signals nutrient deficiency, poor soil drainage, root damage, or unsuitable soil pH rather than a pest problem.

Related: Soil pH, Essential nutrient
Root flare

The widened base of a tree trunk where major roots begin. It should be visible above ground after planting; burying it can lead to girdling roots, decay, and decline.

Related: Girdling root, Transplant shock
Girdling root

A root that grows around the trunk or another root and presses into the bark. It can restrict water and sugar movement, causing slow decline, dieback, and instability over time.

Related: Root flare, Phloem
Transplant shock

Stress after planting that may include wilting, leaf drop, slow growth, or dieback. It results from root loss, poor handling, improper planting depth, or inadequate water after transplanting.

Related: Root flare, Backfill
Backfill

Soil used to fill the planting hole around a new tree. The preferred practice is to use the native soil and avoid amendments that create a distinct, root-confining texture difference.

Related: Transplant shock, Soil texture
Structural pruning

Pruning young or medium-aged trees to develop a strong central leader and well-spaced, well-attached branches. It focuses on future form and strength rather than immediate clearance or size reduction.

Related: Branch collar, Included bark
Crown reduction

Pruning to reduce the height or spread of a tree canopy by cutting branches back to lateral limbs large enough to assume the terminal role. It is not the same as topping.

Related: Topping, Lion tailing
Lion tailing

Removing most small inner branches along a limb and leaving foliage only at the ends. It can cause sunscald, poor taper, excessive sprouting, and weak branch structure.

Related: Crown reduction, Structural pruning
Topping

Cutting a tree's main stem or large branches back to stubs without regard for branch structure. It causes decay, weak regrowth, and stress and is not accepted arboricultural practice.

Related: Crown reduction, Lion tailing
Cabling

Installing a flexible steel cable between limbs to limit movement and reduce stress on a weak union. It is a support system, not a repair, and requires inspection and maintenance.

Related: Included bark, Likelihood of failure
Disease triangle

A model showing that disease occurs only when a susceptible host, a virulent pathogen, and favorable environmental conditions occur together. Removing any one factor can prevent or reduce disease.

Related: Abiotic disorder, Plant health care
Abiotic disorder

Tree damage or decline caused by nonliving factors such as drought, heat, frost, flooding, salt, compaction, or herbicide. It is not contagious and often appears in patterns related to site conditions.

Related: Disease triangle, Plant health care
Plant health care

A preventive, integrated approach to managing tree health using monitoring, cultural practices, resistant plants, and targeted treatments. It emphasizes diagnosing causes and treating only when justified by a threshold.

Related: Action threshold, Abiotic disorder
Action threshold

The pest population or damage level at which treatment is justified to prevent unacceptable harm. It helps avoid unnecessary pesticide use and guides monitoring-based decisions.

Related: Plant health care
Tree risk assessment

A systematic process for estimating the likelihood of a tree or tree part failing and the consequences to a target. It combines inspection, site evaluation, and sometimes advanced testing.

Related: Likelihood of failure, Target
Likelihood of failure

The probability that a tree or tree part will fail within a stated time period. It considers defects, species, site conditions, weather exposure, and load on the tree.

Related: Tree risk assessment, Target
Target

A person, vehicle, building, or other object that could be injured or damaged if a tree part fails. Risk assessment considers both the likelihood of failure and the value of the target.

Related: Tree risk assessment, Likelihood of failure
ANSI Z133

The American national safety standard for arboricultural operations. It covers chainsaw use, climbing, electrical hazards, traffic control, and personal protective equipment for tree work.

Related: Kickback, Drop zone
Kickback

The sudden backward or upward movement of a chainsaw when the nose of the guide bar contacts an object or the chain pinches. It is a major cause of chainsaw injuries.

Related: ANSI Z133, Drop zone
Drop zone

The area beneath a tree where limbs and debris are expected to fall during removal or pruning. Only trained workers should enter, and the area must be controlled for safety.

Related: ANSI Z133, Kickback
Tree ordinance

A local law regulating trees on public or private property. It may require permits for removal, protect heritage trees, set planting standards, or require replacement planting.

Related: Right tree right place
Right tree right place

Selecting a species and cultivar whose mature size, root needs, soil tolerances, and pest resistance match the planting site. This reduces future maintenance, conflicts, and risk.

Related: Cultivar, Tree ordinance

Certified Arborist study plan

8 weeks · About 7 hours per week

Week 1

Tree Biology and Identification

  • Diagram the cross-section of a woody stem from pith to periderm and label xylem, phloem, vascular cambium, and cork cambium

  • Explain in writing how photosynthate allocation, CODIT compartmentalization, and ray parenchyma affect wound response

  • Distinguish monocot vs. dicot vascular arrangement, and identify ring-porous vs. diffuse-porous wood from described features

  • Build a 30-term flashcard set covering leaf arrangement, bud type, bark texture, and twig characters used in winter identification

Your checkpoint

A hand-drawn, fully labeled stem cross-section plus a 30-card identification deck, self-quizzed to 90% accuracy

Week 2

Tree Biology and Identification & Soil and Water Management

  • Identify 20 common urban tree species from written diagnostic descriptions of leaf, bud, bark, and form alone (no images)

  • Describe how soil texture, structure, porosity, and bulk density interact to limit root respiration

  • Calculate plant-available water holding capacity given a texture class and rooting depth

  • Summarize the relationship between soil pH, cation exchange capacity, and nutrient availability

Your checkpoint

A 20-species ID key written from memory, scored against notes, with a passing threshold of 17/20

Week 3

Soil and Water Management & Tree Nutrition and Fertilization

  • Diagnose eight written soil scenarios (compaction, waterlogging, drought, wrong pH, buried root flare, grade change) and prescribe a mitigation for each

  • Explain the 16 essential nutrients by function, mobility in the plant, and typical deficiency symptom

  • Compare fertilization methods (surface, subsurface, injection, foliar) by placement, uptake rate, and risk

  • Interpret a soil test report: pH, CEC, organic matter, P, K, and micronutrients

Your checkpoint

An eight-scenario soil diagnosis worksheet with a defensible prescription for each case

Week 4

Tree Nutrition and Fertilization & Tree Installation and Establishment

  • Calculate a nitrogen application rate for a given tree size using a labeled product and check it against recommended lbs N per inch of trunk diameter

  • Sequence the steps of planting a containerized, B&B, and bare-root tree, including pit width, root flare depth, and staking decision

  • List establishment-care tasks for years 1 through 3 and explain why each matters

  • Explain transplant shock physiology and the role of root:shoot ratio at installation

Your checkpoint

A one-page planting specification sheet covering three stock types, timed against the exam clock in under 10 minutes

Week 5

Tree Installation and Establishment & Pruning and Tree Support Systems

  • Identify the branch collar, branch bark ridge, and codominant union on described stem geometry and state the correct cut for each

  • Differentiate thinning, heading, reduction, removal, and structural pruning by objective and by the growth response each induces

  • Apply the 3-cut method and the 25%/33% live-crown removal limits to five written pruning prescriptions

  • Select and specify a support system (static vs. dynamic, cabling vs. bracing) for three described defect scenarios

Your checkpoint

Five written pruning prescriptions with cut locations justified and the ANSI A300 limits cited for each

Week 6

Pruning and Tree Support Systems & Diagnosis and Plant Health Care

  • Perform a systematic diagnostic walk-through (site, soil, water, history, biotic, abiotic) on ten written case vignettes

  • Distinguish signs from symptoms and separate abiotic from biotic causal factors in each case

  • Match ten common pests/pathogens to host, symptom, and integrated management tactic

  • Explain the PHC monitoring cycle and how to set an action threshold for a given pest

Your checkpoint

A 10-case diagnostic log with a ranked differential diagnosis and a first action for each case

Week 7

Diagnosis and Plant Health Care & Tree Risk Assessment and Management

  • Define likelihood of failure, likelihood of impact, and consequence of failure, and combine them into a risk rating

  • Walk a described tree through the ISA Tree Risk Assessment matrix and defend the resulting rating verbally

  • Produce mitigation options ranked by risk reduction per dollar for three defect scenarios

  • Explain the arborist's duty of care, standard of care, and documentation requirements for a risk inspection

Your checkpoint

Three completed mock risk assessment forms with a written mitigation recommendation and rationale for each

Week 8

Tree Risk Assessment and Management & Safe Work Practices and Urban Forestry

  • Apply ANSI Z133 aerial and ground safety requirements to fifteen described field scenarios and flag each violation

  • State the employer's and employee's responsibilities under the OSHA general duty clause and the Z133 standard

  • Explain tree ordinance, tree protection zone, and preservation-plan concepts in urban forestry practice

  • Complete a timed 100-question cumulative review and remediate every missed item back to its source domain

Your checkpoint

A timed 100-question practice exam scored 85% or better, with a written remediation note for every miss

Milestones

Week 2: Score 17/20 or better on the from-memory species ID key and explain CODIT unaided in 3 minutes

Week 4: Complete the planting specification sheet in under 10 minutes with no factual errors on root flare depth or staking criteria

Week 6: Rank the correct primary cause in at least 8 of the 10 diagnostic vignettes

Week 8: Score 85% or better on the timed cumulative exam and close out all remediation notes

Certified Arborist exam day

Your checklist

Government-issued photo ID

Bring the original (not a photocopy) and make sure the name matches your registration exactly. Confirm with the provider which ID forms are accepted before test day.

Appointment confirmation / authorization to test

Print or save the confirmation email or authorization document if your provider requires one at check-in. Confirm with the provider whether a printed copy is needed or a digital version is acceptable.

Verified test-center location and route

Do a dry run or map the route in advance. Note parking, transit stops, building entrance, and floor or suite number. If testing remotely, confirm the platform, browser check, and room requirements ahead of time.

Calculator and reference-material policy

Know before you arrive whether an on-screen calculator is provided, whether a basic calculator is permitted, and whether any reference sheets are supplied. Most credentialing exams are closed book; confirm with the provider rather than assuming.

Scratch paper and writing instrument

Many testing centers supply these and prohibit bringing your own. Confirm the provider's policy so you are not surprised at the door.

Timekeeping plan

Confirm whether a watch is allowed in the testing room or whether a clock on the screen is the only time reference. If watches are barred, plan your pacing around the on-screen timer.

Water and a light snack

Bring something small in case a scheduled break is offered; items typically must stay in a locker. Confirm the break policy and locker availability with the provider.

Backup transport plan

Identify a second route or a rideshare fallback so a delay does not cost you the seat. Arriving early is safer than arriving exactly on time.

One-page summary sheet for last-minute review

Limit yourself to a single page of high-value material: key formulas, unit conversions, pruning-cut terminology, soil and fertilization thresholds, and tree-risk vocabulary. Review it before entering the building, then put it away.

Logistics for the rest of the day

Clear your calendar after the exam. A long, focused testing block is tiring, and you do not want to drive straight into a demanding commitment.

Plan the day

72 hours out

Re-confirm your appointment date, time, and location, and verify the name on your registration matches your ID. Resolve any discrepancy now, since fixes at the door are usually impossible.

72 hours out

Stop introducing new topics. Spend remaining study time on your two or three weakest domains, using short focused sessions rather than marathon reviews.

48 hours out

Take one timed practice set under realistic conditions: no notes, no phone, single sitting. Use it to calibrate pace, not to learn new content.

48 hours out

Review the practice set only for error patterns: misread questions, rushed calculations, second-guessing correct answers. Write down two or three habits to correct on test day.

24 hours out

Pack your bag: ID, confirmation document, directions, and any provider-approved items. Lay everything by the door.

24 hours out

Do a light pass over your one-page summary, then stop. Protect sleep; fatigue costs more points than one extra hour of review gains.

Night before

Set two alarms, check for any test-center closure or weather notice, and confirm your departure time leaves a buffer of at least 30 minutes.

Morning of

Eat a normal meal, hydrate moderately, and avoid heavy caffeine if you are caffeine-sensitive. Arrive at the center early rather than on the minute.

At check-in

Have your ID out, store phone and any smartwatch in the locker, and read the on-screen instructions and tutorial rather than clicking through them.

During the test: first pass

Work steadily and answer the questions you know immediately. Budget roughly a minute per question so you finish the first pass with time left; adjust once you see the actual item count and time limit.

During the test: hard items

Flag anything requiring long calculation or a guess between two close options and move on. Return to flagged items after the first pass when you are calmer and time-boxed.

During the test: final minutes

Confirm no question is left blank, revisit flagged items, and change an answer only when you can articulate a specific reason. Then submit deliberately.

After the test

Note how and when results are released, save any score report you receive, and record which domains felt weak in case you need to retest.

Rules to check

  • Bring valid, unexpired government-issued photo ID; the name must match your registration. Confirm acceptable ID forms and any secondary ID requirement with the provider in advance.

  • The exam is closed book. Phones, smartwatches, notes, and study materials stay in the locker or outside the testing room; a device found in the room can lead to score cancellation.

  • Arrive early. Policies on late arrivals vary, and a candidate who arrives after the cutoff may be turned away and charged. Confirm the provider's late-arrival rule before test day.

  • Confirm the break policy in advance, including whether unscheduled breaks are permitted and whether the exam clock keeps running during them. Do not assume either way.

  • Answer every question. Most credentialing exams do not penalize incorrect answers, so an educated guess beats a blank. Confirm whether the exam uses a penalty-free scoring model.

  • The passing standard is set by the certifying body, not by a fixed percentage you can derive from the raw score. Confirm the current passing score and any scaled-score reporting with the provider.

  • Expect to sign a confidentiality agreement. Do not discuss, reproduce, or share specific exam content with anyone afterward.

  • Confirm the rescheduling and cancellation deadlines and fees before the final 72 hours; these windows are typically tight and often involve a fee.

Certified Arborist FAQ

How many Certified Arborist practice questions are available?

The practice set has 199 Certified Arborist questions. Each one includes the choices, the correct answer, and an explanation, and the set is free to read with no signup.

How many Certified Arborist flashcards are available?

The flashcard set has 32 Certified Arborist cards. Each card shows the term and its definition.

Which topics does the Certified Arborist study material cover?

The Certified Arborist study material has 8 sections, including Tree Biology and Identification, Soil and Water Management, and Tree Nutrition and Fertilization.

What format facts does the catalog list for the Certified Arborist exam?

The catalog lists these item types: multiple choice for the Certified Arborist exam.