CCHT Practice Test

Certified Clinical Hemodialysis Technician (CCHT)

CCHT overview

  • 200 practice questions
  • 32 flashcards
  • 5 study guide topics
  • 40 key terms

What you'll study

  • Patient Care and Assessment20%
  • Dialysis Procedures and Equipment20%
  • Water Treatment and Dialysate Preparation20%
  • Infection Control and Patient Safety20%
  • Professional Practice, Education, and Role Responsibilities20%

The Certified Clinical Hemodialysis Technician (CCHT) credential is a nephrology-specific certification from the Nephrology Nursing Certification Commission (NNCC), designed for practicing dialysis technicians who hold a high school diploma or a GED. It signals that a technician has met a national practice standard in hemodialysis care, and NNCC frames its certification programs around patient safety and quality of care rather than generalist testing. Technicians with substantial experience - at least 5,000 hours and 5 years - may instead qualify for the advanced CCHT-A credential. The CCHT exam is a multiple-choice, English-language exam delivered through NNCC's testing partner, C-NET, and it samples five areas of practice: patient care and assessment, dialysis procedures and equipment, water treatment and dialysate preparation, infection control and patient safety, and professional practice, education, and role responsibilities. To prepare, build a study plan that covers all five domains rather than only the tasks you perform daily, and use the reference list found under the Practice/Prepare tab for your credential. NNCC states plainly that books and flash cards marketed as exam preparation are not created or endorsed by NNCC and are not recommended. Candidates who need ADA accommodations can arrange them through C-NET; English as a second language is not treated as a disability under the ADA.

Common mistakes

When a patient becomes symptomatic during treatment, the candidate reaches for a single reflex action (giving saline, slowing the pump) before establishing what the event actually is, so hypotensive episodes, cramping, and dialysis disequilibrium syndrome get treated identically.

All three present with overlapping 'I don't feel well' complaints during the same window of treatment, and candidates memorise 'saline and slow the pump' as a universal answer because it appears in so many practice scenarios. Under time pressure, the distinguishing cues (blood pressure trend, relationship to UF rate, presence of headache/restlessness/confusion rather than diaphoresis) get skipped.

What to do instead

Before responding, run a fixed 4-point check out loud in practice: blood pressure versus baseline, current UF rate and total volume removed, ultrafiltration-to-weight ratio, and mental status/neuro complaints. Low BP with diaphoresis and a large UF volume points to hypotension; a sharply negative or falling BP with an abrupt UF goal change points to a UF-driven event; headache, nausea, restlessness or confusion in a patient with a high BUN treated with a fast blood flow points to disequilibrium, which requires slowing the blood flow and not simply volume loading. Drill 10 of these vignettes until the discrimination, not the reflex, is automatic.

The candidate accepts a numeric alarm limit as the answer about 'safe dialysate' rather than the machine's own measured value, and therefore cannot say what to do when the conductivity alarm sounds mid-treatment.

Study material for alarms is usually learned as machine-button sequences (silence, reset, resume) without the physiological reason behind the alarm. Because the alarm clears when the button is pressed, candidates learn that the alarm is a nuisance signal rather than a statement that the fluid bathing the patient's blood is wrong.

What to do instead

Anchor the alarm to its consequence: abnormal dialysate conductivity means the osmotic and electrolyte composition reaching the dialysate side of the membrane is wrong, so treatment must not be resumed and the patient must not be reconnected until the machine is corrected and the condition re-verified. In practice, state the normal dialysate conductivity range you were taught (typically about 13.5-14.5 mS/cm, machine-specific) and rehearse the sequence: stop/reset the alarm, do not override to continue, check the concentrate supply, lines and proportioning, then confirm with an independent meter before resuming. Practise explaining this to a patient in one sentence.

The candidate blames the patient or the needle for a venous pressure alarm and answers 'reposition the arm', missing that a steadily rising venous pressure with a rising TMP and falling clearance indicates clotting in the dialyzer or venous chamber.

Venous pressure and TMP are taught as two separate pieces of equipment trivia, and low-frequency alarm causes (arm position, kink) are easier to remember than the trending pattern. Candidates read a single snapshot number instead of the trend, so any high reading defaults to 'positioning'.

What to do instead

Learn the trend signature as a unit: rising venous pressure plus rising TMP plus dark or layered blood in the venous chamber and falling adequacy markers equals clot, and the response is to assess and replace rather than reposition. Practise interpreting a short trend (three readings over 20 minutes) instead of one number, and pair each alarm with the compartment it measures: pre-pump arterial pressure reflects access and arterial needle problems, venous pressure reflects the post-dialyzer return path including the venous chamber and needle, and TMP reflects the membrane itself.

The candidate treats water treatment components as a list to memorise and cannot match a component to the contaminant it removes, then answers questions about chloramine breakthrough, hardness, or RO rejection by guessing which tank is which.

The components (softener, carbon, RO, DI) are taught as a linear flow diagram, and candidates learn the order without learning the hazard each stage exists to prevent. When a question presents a failure (a positive chlorine test, a hardness breakthrough, a conductivity rise) there is no mapping from symptom back to stage.

What to do instead

Build a one-line hazard map and memorise it as cause and effect: softener removes calcium and magnesium hardness that would scale the RO; carbon removes chlorine and chloramine that would otherwise cross the membrane and cause hemolysis in the patient; RO removes dissolved ions and most remaining contaminants; DI polishes ions where used. Then learn the associated test for each: hardness testing after the softener, chlorine/chloramine testing after carbon at the frequency your facility requires and always after carbon backwash or replacement, conductivity and percent rejection for the RO. Rehearse the response to a failed chlorine test as an immediate patient safety action, not a maintenance note.

The candidate answers water and dialysate quality questions using the drinking-water standard or an infection-control intuition, rather than the separate, stricter limits that apply to dialysis water and dialysate.

Municipal drinking-water limits are widely known and sound authoritative, so they feel like a safe answer. The distinction between water used for dialysate versus water used for reprocessing versus municipal supply is rarely rehearsed, so candidates collapse them into one number.

What to do instead

Learn the categories rather than a single figure: dialysis water and dialysate are held to far tighter microbiological limits than drinking water because a patient's blood is exposed to hundreds of litres per week across a non-intact membrane barrier. Memorise the current AAMI/ANSI targets approximately as bacterial counts under 100 CFU/mL in water and under 200 CFU/mL in dialysate, with endotoxin under 0.25 EU/mL in water and under 2 EU/mL in dialysate, and confirm the exact values your program uses. When a question describes a rise in bacteria or endotoxin, answer with the response chain: culture and disinfection of the system, review of the disinfection schedule and stagnation, and notification before patient treatment resumes.

The candidate applies alcohol-based hand rub in every situation, including when hands are visibly soiled or after caring for a patient with a spore-forming organism such as Clostridioides difficile, and describes a single 'wash your hands' step instead of the specific moments.

Training distills hand hygiene into one action, and the exceptions feel like trivia rather than the point. Candidates also memorise five 'moments' as a slogan without mapping them onto the dialysis routine where cannulation, connection and disconnection are the high-risk transitions.

What to do instead

Learn the two exceptions explicitly: visible soiling or exposure to spore-formers requires soap and water with friction, because alcohol does not reliably kill spores; otherwise alcohol-based rub is acceptable and faster. Then anchor the moments to actual tasks in the shift: before touching the patient or the access, before an aseptic task such as cannulation or catheter dressing, after body fluid exposure risk, after touching the patient, and after touching the machine or the immediate surroundings. Practise narrating the moments during a mock connection so the sequence is habitual rather than recalled.

The candidate manages a catheter as though it were a fistula, cleaning the exit site and hub with the same casual technique and letting the catheter remain uncapped or open to air while switching connections.

Catheters look robust and the visible dressing makes the task feel like routine wound care, so the aseptic barrier concept is underapplied. Candidates also learn 'clean the site' without learning that the hub is the entry point for bloodstream infection and therefore requires a separate, sequenced antisepsis step.

What to do instead

Treat every catheter task as a sterile-barrier procedure: mask for patient and staff, sterile gloves, full drape, and a scrub of the hub with friction and the full dry time stated by the antiseptic manufacturer before accessing. Keep the catheter clamped and capped whenever it is disconnected, and never let an open lumen sit exposed while you reach for something. Rehearse the sequence with a timer for the dry time, because shortening the dry time is the most common silent break in technique.

The candidate answers scope-of-practice items by choosing the most clinically helpful action rather than the action permitted to the technician role, for example independently adjusting a prescription, changing a UF goal, or deciding to terminate treatment without notifying the nurse.

Exam items reward the 'best patient outcome', and candidates carry over a helpfulness instinct from the unit floor where an experienced technician may anticipate the nurse's decision. The technician role is delegated and task-specific, so the correct answer is often 'assess, act within protocol, and report' rather than 'solve'.

What to do instead

Learn the boundary as a two-part rule: technician actions are those delegated and permitted by state law and facility policy, with the nurse retaining assessment, planning and evaluation of the plan of care. For any scenario involving a change to the prescription (UF goal, sodium, dialysate composition, treatment time), a new symptom requiring clinical judgement, or a decision to stop treatment, the answer is to act within standing protocol for immediate safety and notify the registered nurse. Practise rewriting free-text vignettes into 'what can I do now' versus 'what must I report', and always include the report step in your answer.

The candidate documents by memory after the fact, records only the abnormal values, or omits the intervention-response pair, so the record shows a change but not what was done and whether it worked.

Documentation feels administrative next to hands-on skills, and during a busy shift charting is deferred and reconstructed later. Candidates also mistake brevity for professionalism and therefore strip out the very elements that show clinical reasoning.

What to do instead

Use a fixed documentation skeleton for every event: what was observed with the value and time, what was done, what the response was, and whom it was reported to. Chart in real time at the machine wherever the system allows rather than at the end of the shift, and treat machine data (pressures, UF removed, alarm history) as part of the record, not as optional detail. Practise writing three mock entries, one each for hypotension, a venous pressure alarm, and a catheter dressing change, and check each against the skeleton.

The candidate calculates ultrafiltration goal and expected fluid removal without accounting for the fluids given and returned during the treatment (prime, rinseback, saline boluses), and reports a 'goal met' that does not match the patient's actual weight change.

The arithmetic is taught once as a formula and then done mentally under time pressure. Saline given during a hypotension episode and rinseback at the end are treated as separate housekeeping rather than as volume that must be subtracted from the net removal, so the numbers look right on the machine but wrong on the scale.

What to do instead

Work every calculation through a written four-line ledger: total fluid goal, minus prime and rinseback volume, minus saline and other intake given during treatment, equals net volume the machine should remove; then verify against the pre- and post-treatment weights. Redo the ledger after any bolus, because a hypotensive event changes the plan. Practice ten calculations including one with a mid-treatment 200 mL bolus and one where the prescribed goal exceeds the patient's estimated dry weight tolerance, and always sanity-check the arithmetic against a plausible weight change in kilograms.

Exam requirements can change. Confirm current details with the exam provider.

CCHT practice

200 questions. Each one lists the choices, the correct answer, and an explanation. With JavaScript, this list opens one question at a time. The checker at the top of this page saves progress in this browser when it is available.

  1. Question 1Patient Care and Assessment

    Which information does the pre-dialysis weight mainly provide for the care team?

    1. Whether the patient needs a blood transfusion
    2. How well the patient has been eating and sleeping
    3. The patient's lean body mass in kilograms
    4. The fluid to remove to reach target weight Correct answer.

    Explanation

    The pre-dialysis weight is compared with the patient's target (dry) weight to set the ultrafiltration goal for the treatment. It is a fluid measure, not a nutritional or hematologic assessment.

  2. Question 2Patient Care and Assessment

    A thrill at a dialysis access is best described as which of the following?

    1. A vibration felt with the fingertips Correct answer.
    2. A blowing sound heard through a stethoscope
    3. A reddish streak along the skin
    4. A sharp pain reported by the patient

    Explanation

    A thrill is the palpable vibration created by turbulent flow through the access and is assessed by light palpation. The corresponding sound heard with a stethoscope is the bruit.

  3. Question 3Patient Care and Assessment

    Which pre-dialysis heart rate should be reported to the nurse before treatment begins?

    1. 88 beats/min
    2. 62 beats/min
    3. 118 beats/min Correct answer.
    4. 78 beats/min

    Explanation

    The usual resting adult heart rate is about 60 to 100 beats per minute. A rate of 118 beats/min is above that range and warrants evaluation before treatment starts.

  4. Question 4Patient Care and Assessment

    Muscle cramps during hemodialysis are most often related to which cause?

    1. Too much sodium removed during treatment
    2. An allergic response to the dialyzer membrane
    3. A sudden drop in blood potassium
    4. Rapid or excessive fluid removal Correct answer.

    Explanation

    Cramping is most commonly linked to a high ultrafiltration rate or removal of fluid below the patient's target weight. Slowing fluid removal and reassessing the target usually relieves it.

  5. Question 5Patient Care and Assessment

    Which symptom cluster is typical of a hypotensive episode during treatment?

    1. Itching, rash, and hives
    2. Yawning, nausea, and cold sweats Correct answer.
    3. Fever, chills, and a productive cough
    4. Numbness and tingling of the fingers

    Explanation

    Falling blood pressure during dialysis commonly presents with yawning, nausea, diaphoresis, restlessness, and dizziness. Recognizing these early signs allows prompt intervention.

  6. Question 6Patient Care and Assessment

    Which finding at the needle site most suggests a local infection?

    1. Warmth, redness, and purulent drainage Correct answer.
    2. A small bruise from the previous treatment
    3. Slight induration from today's cannulation
    4. A faint pulse felt over the site

    Explanation

    Warmth, erythema, purulent drainage, and tenderness at a cannulation site are classic signs of access-related infection. These findings require prompt reporting.

  7. Question 7Patient Care and Assessment

    Which food should a patient on hemodialysis be taught to limit because of its high potassium content?

    1. White bread
    2. Apple slices
    3. Bananas Correct answer.
    4. Cooked rice

    Explanation

    Bananas are a well-known high-potassium fruit and are commonly restricted in the renal diet. Bread, rice, and apples are comparatively lower in potassium.

  8. Question 8Patient Care and Assessment

    Hand hygiene is required at which point in the patient care sequence?

    1. Only at the end of the shift
    2. Only after removing gloves
    3. Before and after every patient contact Correct answer.
    4. Only when the hands look soiled

    Explanation

    Hand hygiene is performed before and after every patient contact, and also after glove removal. Gloves do not replace hand washing.

  9. Question 9Patient Care and Assessment

    A patient becomes diaphoretic and nauseated with a blood pressure of 84/48 mmHg. Which action should the technician take first?

    1. Give the patient a potassium supplement
    2. Stop ultrafiltration and lay the patient flat Correct answer.
    3. Increase the blood flow rate to finish sooner
    4. Send the patient home to rest

    Explanation

    Symptomatic hypotension during treatment is managed by halting fluid removal and positioning the patient supine or in Trendelenburg to support perfusion. Further measures such as saline per protocol follow.

  10. Question 10Patient Care and Assessment

    If the venous needle is pulled out during treatment, which action comes first?

    1. Restart the treatment at a lower blood flow
    2. Document the event after treatment ends
    3. Apply a warm compress to the site
    4. Stop the blood pump and clamp the lines Correct answer.

    Explanation

    Stopping the pump and clamping the lines halts blood loss and prevents air from entering the circuit. Direct pressure at the site and assessment of the patient follow immediately.

  11. Question 11Patient Care and Assessment

    Which finding indicates that a needle has infiltrated?

    1. Bright red blood flowing briskly into the arterial line
    2. A continuous bruit over the access
    3. Swelling and pain around the needle with poor flow Correct answer.
    4. A palpable thrill along the whole fistula

    Explanation

    Infiltration occurs when the needle tip leaves the vessel, so blood leaks into surrounding tissue, producing swelling, pain, and reduced flow. The needle should be stopped and the area assessed.

  12. Question 12Patient Care and Assessment

    A patient suddenly develops dyspnea and chest pain after air enters the extracorporeal circuit. How should the patient be positioned?

    1. Right side down with the head elevated
    2. Flat on the back with legs raised
    3. Head down and turned onto the left side Correct answer.
    4. Sitting upright leaning forward

    Explanation

    Trendelenburg position with the patient on the left side traps air in the right ventricular apex and limits its movement into the pulmonary circulation. The nurse or provider must be summoned at once.

  13. Question 13Patient Care and Assessment

    Which symptoms suggest dialysis disequilibrium syndrome?

    1. Tremor and hunger with a low glucose
    2. Hives and wheezing after treatment starts
    3. Fever and chills during the first hour
    4. Headache, nausea, and confusion Correct answer.

    Explanation

    Disequilibrium results from a rapid osmolar shift, producing headache, nausea, restlessness, confusion, and in severe cases seizures. Slowing the treatment helps prevent it.

  14. Question 14Patient Care and Assessment

    Cherry-red blood in the venous line accompanied by back pain and shortness of breath suggests which problem?

    1. An air embolism in the venous line
    2. Hemolysis of the patient's red cells Correct answer.
    3. A mild allergic reaction to heparin
    4. A hypotensive reaction to treatment

    Explanation

    Dark red plasma and cherry-red blood, together with back pain and dyspnea, are hallmarks of hemolysis. The pump should be stopped and the nurse notified immediately.

  15. Question 15Patient Care and Assessment

    To be effective, phosphate binders must be taken at which time?

    1. Only when the phosphorus level is elevated
    2. With meals or snacks Correct answer.
    3. Only at bedtime with a full glass of water
    4. On an empty stomach one hour before meals

    Explanation

    Binders work by binding phosphorus in the gut lumen, so they must be present when food is eaten. They are taken with meals and snacks consistently, not just when levels are high.

  16. Question 16Patient Care and Assessment

    Which statement by a patient shows correct understanding of a fluid restriction?

    1. I can drink all I want if I avoid salt.
    2. Thirst is a sign I should drink more.
    3. Ice chips and gelatin count toward my fluid limit. Correct answer.
    4. Soup and ice count as food, not fluid.

    Explanation

    All foods that are liquid at room temperature, including ice, gelatin, soup, and popsicles, count toward the daily fluid allowance. Limiting sodium helps reduce thirst but does not remove the fluid limit.

  17. Question 17Patient Care and Assessment

    After the needles are removed, the patient's access site keeps oozing. Which action is appropriate?

    1. Apply a tourniquet above the access
    2. Send the patient home with extra gauze
    3. Loosen the dressing to let it drain
    4. Hold firm pressure until bleeding stops Correct answer.

    Explanation

    Direct, firm pressure over the puncture sites stops bleeding without occluding the access. A tourniquet or an early discharge is unsafe when bleeding persists.

  18. Question 18Patient Care and Assessment

    During treatment a patient reports crushing chest pain. What should the technician do?

    1. Stop ultrafiltration and monitor vital signs Correct answer.
    2. Increase the ultrafiltration rate to finish early
    3. Assume it is heartburn and continue treatment
    4. Give the patient a large glass of water

    Explanation

    Chest pain during dialysis may signal ischemia related to fluid removal or a cardiac event, so ultrafiltration is stopped and vital signs are checked while the nurse is notified. Treatment resumes only on direction of the care team.

  19. Question 19Patient Care and Assessment

    A patient begins to seize during treatment. Which action is correct?

    1. Restrain the arms and legs firmly
    2. Disconnect the blood lines immediately
    3. Place a tongue blade between the teeth
    4. Protect the patient from injury and summon help Correct answer.

    Explanation

    During a seizure the priority is protecting the patient from injury by padding and clearing the area while calling for assistance. Restraints and objects in the mouth risk harm.

  20. Question 20Patient Care and Assessment

    A patient's weight is 4 kg above target since the last treatment. What is the most appropriate action?

    1. Report the gain and review fluid limits Correct answer.
    2. Restrict all fluids for the next 24 hours
    3. Skip the treatment and recheck weight next time
    4. Remove the extra fluid as fast as the machine allows

    Explanation

    A large interdialytic gain is reported to the care team and addressed with fluid-removal planning and reinforcement of the fluid and sodium plan. Rapid removal increases the risk of hypotension and cramping.

  21. Question 21Patient Care and Assessment

    A patient must lose 2.8 kg over a 3.5-hour treatment. What average ultrafiltration rate is required?

    1. 600 mL/hr
    2. 1200 mL/hr
    3. 800 mL/hr Correct answer.
    4. 1000 mL/hr

    Explanation

    Convert the fluid goal to milliliters and divide by treatment hours: 2800 mL divided by 3.5 hours equals 800 mL/hr. This average rate is compared with the patient's tolerance and maximum allowed rate.

  22. Question 22Patient Care and Assessment

    At the start of treatment, the technician can neither palpate a thrill nor hear a bruit in the fistula. What should be done?

    1. Do not cannulate and notify the team Correct answer.
    2. Apply warm compresses and try again in one hour
    3. Cannulate the access anyway and watch the flows
    4. Use the access but lower the blood flow rate

    Explanation

    Absent thrill and bruit suggest loss of flow, such as clotting, and the access must not be cannulated. The nurse or provider is notified so the access can be evaluated and other vascular access arranged.

  23. Question 23Patient Care and Assessment

    A firm, pulsating mass has developed over a fistula, with shiny skin overlying it. What does this most likely represent?

    1. A pseudoaneurysm Correct answer.
    2. An infected needle site
    3. A normal mature fistula
    4. A simple hematoma

    Explanation

    A pulsatile, firm swelling with taut, shiny skin over an access reflects a pseudoaneurysm from repeated needle injury to the vessel wall. It should not be cannulated and must be reported for evaluation.

  24. Question 24Patient Care and Assessment

    A patient with a target weight of 70 kg arrives 3.5 kg above target. What is the percent weight gain?

    1. 5 percent Correct answer.
    2. 7 percent
    3. 10 percent
    4. 2 percent

    Explanation

    Percent gain is the gain divided by target weight times 100: 3.5 divided by 70 equals 0.05, or 5 percent. Gains above the program's threshold are reported and addressed with the patient.

  25. Question 25Patient Care and Assessment

    A patient with diabetes becomes tremulous, sweaty, and confused during treatment while blood pressure stays stable. Which cause should be suspected first?

    1. Dialysis disequilibrium
    2. Access infection
    3. Air embolism
    4. Low blood glucose Correct answer.

    Explanation

    Dialysis removes glucose, so diabetic patients can become hypoglycemic, producing diaphoresis, tremor, and confusion with a stable blood pressure. A glucose check should be done and the nurse notified.

  26. Question 26Patient Care and Assessment

    Which measurement best helps determine a hemodialysis patient's target weight?

    1. Weight at home before breakfast
    2. Weight at the end of each treatment
    3. Weight without edema at normal blood pressure Correct answer.
    4. Weight after a saline bolus during treatment

    Explanation

    Target weight is the weight at which the patient is free of edema and has a normal or near-normal blood pressure without extra fluid removal. It is reassessed over time and is not simply the weight at the end of a treatment.

  27. Question 27Patient Care and Assessment

    Where should the technician place the blood pressure cuff for a patient with a left forearm arteriovenous fistula?

    1. On the right arm Correct answer.
    2. Over the fistula site on the left arm
    3. On the left wrist below the fistula
    4. On the left upper arm above the fistula

    Explanation

    Blood pressure should be measured in the arm without the vascular access to avoid compressing the fistula or graft. The access arm is avoided for cuffs, venipuncture, and intravenous lines.

  28. Question 28Patient Care and Assessment

    Which finding in a hemodialysis patient most suggests fluid overload between treatments?

    1. Flat neck veins when sitting
    2. Dry, flaky skin
    3. Shortness of breath when lying flat Correct answer.
    4. Weight lower than target

    Explanation

    Orthopnea and new shortness of breath are signs of fluid overload, often accompanied by weight gain and edema. A falling weight, flat neck veins, and dry skin do not suggest excess fluid.

  29. Question 29Patient Care and Assessment

    Which symptom is most associated with a high serum potassium level in a dialysis patient?

    1. Muscle weakness Correct answer.
    2. Ringing in the ears
    3. Frequent hiccups
    4. Increased thirst

    Explanation

    Hyperkalemia can cause muscle weakness, fatigue, and cardiac arrhythmias; peaked T waves may be seen on an electrocardiogram. The other symptoms are not typical of high potassium.

  30. Question 30Patient Care and Assessment

    A patient develops painful muscle cramps near the end of treatment while fluid is being removed rapidly. What is the most appropriate first action?

    1. Give an oral potassium binder
    2. Raise the ultrafiltration rate
    3. Lower the ultrafiltration rate Correct answer.
    4. Stop the treatment immediately

    Explanation

    Muscle cramps during treatment often result from rapid fluid removal, so the initial response is to slow the ultrafiltration rate and, per protocol, give saline. Raising the rate would worsen cramping, and stopping treatment is not the first step.

  31. Question 31Patient Care and Assessment

    Which laboratory result is most useful for assessing a patient's protein nutrition over several weeks?

    1. Pre-dialysis blood urea nitrogen
    2. Serum albumin Correct answer.
    3. Hematocrit
    4. Serum potassium

    Explanation

    Serum albumin reflects protein stores and nutrition over weeks and is a standard nutrition marker in dialysis patients. BUN, potassium, and hematocrit are affected by other factors and do not assess protein nutrition over time.

  32. Question 32Patient Care and Assessment

    Which set of findings best indicates that a new arteriovenous fistula is mature enough for cannulation?

    1. Flow 900 mL/min, diameter 4 mm, depth 9 mm
    2. Flow 300 mL/min, diameter 3 mm, depth 8 mm
    3. Flow 650 mL/min, diameter 7 mm, depth 5 mm Correct answer.
    4. Flow 500 mL/min, diameter 5 mm, depth 7 mm

    Explanation

    The rule of 6s is commonly used: flow greater than 600 mL/min, diameter at least 6 mm, depth no more than 6 mm, and at least 6 weeks after creation. Only the set with flow 650 mL/min, diameter 7 mm, and depth 5 mm meets these criteria.

  33. Question 33Patient Care and Assessment

    During treatment, the venous pressure alarm sounds repeatedly and the reading is rising. Which action should the technician take first?

    1. Ignore the alarm if the patient feels well
    2. Flush the arterial line with saline
    3. Increase the blood flow rate
    4. Check the venous needle and tubing Correct answer.

    Explanation

    A rising venous pressure alarm suggests resistance after the venous needle, such as a kink, clot, or needle malposition. The technician should inspect the venous needle and tubing first.

  34. Question 34Patient Care and Assessment

    Which statement by a patient shows correct understanding of sodium restriction?

    1. I will check labels and limit canned soup Correct answer.
    2. I should add salt to food for taste
    3. I can use salt substitutes freely
    4. Sodium only matters on dialysis days

    Explanation

    Canned soups and processed foods are high in sodium, so label reading and limiting them helps control thirst and fluid gain. Salt substitutes are often high in potassium, sodium restriction applies daily, and adding salt worsens thirst.

  35. Question 35Patient Care and Assessment

    A patient with an arteriovenous fistula reports numbness, tingling, and weakness in the hand on the access side. What does this most likely indicate?

    1. Access infection
    2. Venous stenosis
    3. Steal syndrome Correct answer.
    4. Pseudoaneurysm

    Explanation

    Steal syndrome occurs when the fistula diverts blood away from the hand, causing numbness, tingling, weakness, or coolness. Infection, stenosis, and pseudoaneurysm cause different findings.

  36. Question 36Patient Care and Assessment

    A patient with a central venous catheter develops fever and chills at the start of treatment. What should the technician do?

    1. Apply a warm compress to the exit site
    2. Flush the catheter with a larger syringe
    3. Begin dialysis as ordered and recheck temperature later
    4. Stop and notify the nurse or physician Correct answer.

    Explanation

    Fever and chills with a central catheter suggest a catheter-related bloodstream infection, so treatment should be stopped and the nurse or physician notified. Starting dialysis or manipulating the catheter can worsen the situation.

  37. Question 37Patient Care and Assessment

    During treatment, the arterial pressure reading becomes more negative than usual. Which cause is most likely?

    1. Low dialysate sodium
    2. Excess fluid removal
    3. Clotting at the arterial needle or line Correct answer.
    4. Infiltration at the venous needle

    Explanation

    More negative arterial pressure indicates increased resistance before the pump, commonly from clotting or kinking at the arterial needle or line. Venous infiltration, fluid removal, and dialysate sodium affect other pressures or symptoms.

  38. Question 38Patient Care and Assessment

    A patient's pre-dialysis BUN is 80 mg/dL and post-dialysis BUN is 24 mg/dL. What is the urea reduction ratio?

    1. 70% Correct answer.
    2. 60%
    3. 75%
    4. 66%

    Explanation

    URR is calculated as (pre-dialysis BUN minus post-dialysis BUN) divided by pre-dialysis BUN, multiplied by 100. Here (80 minus 24) divided by 80 times 100 equals 70%.

  39. Question 39Patient Care and Assessment

    Which patient is at greatest risk for dialysis disequilibrium syndrome?

    1. A patient with a BUN of 60 mg/dL after missing one treatment
    2. A patient starting dialysis with a BUN of 180 mg/dL Correct answer.
    3. A patient with a BUN of 30 mg/dL on peritoneal dialysis
    4. A patient on chronic dialysis with a BUN of 40 mg/dL

    Explanation

    Disequilibrium is most likely when dialysis is started in a patient with a very high BUN because urea is removed faster from blood than from brain. A first treatment with BUN 180 mg/dL is the highest-risk scenario listed.

  40. Question 40Patient Care and Assessment

    A patient's target weight is 68 kg. After treatment the patient weighs 66.5 kg and reports dizziness when standing. What is the best interpretation?

    1. The patient's target weight should be increased by 1.5 kg
    2. The patient has gained fluid and needs more ultrafiltration
    3. The patient is at target and needs no further action
    4. The patient is below target and should be assessed for hypovolemia Correct answer.

    Explanation

    A post-treatment weight below target with dizziness on standing suggests excessive fluid removal or hypovolemia. The technician should notify the nurse and reassess rather than assume the patient is at target.

  41. Question 41Dialysis Procedures and Equipment

    Which component of the extracorporeal circuit detects air before blood is returned to the patient?

    1. The dialysate conductivity meter
    2. The arterial pressure monitor
    3. The blood leak detector
    4. The air detector on the venous line Correct answer.

    Explanation

    The air detector uses an ultrasonic sensor on the venous blood line to identify air bubbles before blood reaches the patient. When air is detected, the blood pump stops and the venous clamp closes to prevent air embolism.

  42. Question 42Dialysis Procedures and Equipment

    What is the purpose of the blood leak detector on a hemodialysis machine?

    1. It detects blood in the dialysate Correct answer.
    2. It monitors the conductivity of the dialysate
    3. It measures the delivered dialysate flow rate
    4. It detects air in the arterial blood line

    Explanation

    The blood leak detector is an optical sensor on the dialysate outlet that senses blood that has crossed a ruptured membrane. A positive alarm stops the blood pump and places dialysate in bypass to prevent further blood loss.

  43. Question 43Dialysis Procedures and Equipment

    Transmembrane pressure (TMP) is best described as which of the following?

    1. The pressure gradient across the dialyzer membrane Correct answer.
    2. The pressure difference between the arterial and venous lines
    3. The pressure inside the venous drip chamber
    4. The pressure of the dialysate entering the dialyzer

    Explanation

    TMP is the difference between the average blood compartment pressure and the dialysate compartment pressure across the membrane. It is the driving force for ultrafiltration, so higher TMP removes more fluid when the membrane coefficient is constant.

  44. Question 44Dialysis Procedures and Equipment

    Which water treatment component removes chlorine and chloramine from the water used for dialysis?

    1. The water softener
    2. The reverse osmosis membrane
    3. The ultraviolet lamp
    4. The carbon filtration tanks Correct answer.

    Explanation

    Granular activated carbon adsorbs chlorine and chloramine, which must be removed because they cause hemolysis and are not reliably removed by reverse osmosis. Chlorine testing is required before each shift and after carbon tank changes.

  45. Question 45Dialysis Procedures and Equipment

    A hardness test on the water treatment system is performed to evaluate which component?

    1. The ultrafilter
    2. The carbon tanks
    3. The ultraviolet lamp
    4. The water softener Correct answer.

    Explanation

    Hardness testing measures calcium and magnesium, which the softener exchanges for sodium. A rising hardness result indicates the softener is exhausted or failing and needs regeneration or service.

  46. Question 46Dialysis Procedures and Equipment

    During a treatment the conductivity alarm sounds and the display reads 11.5 mS/cm. What is the most appropriate first action?

    1. Place the machine in bypass and check the concentrate supply Correct answer.
    2. Increase the blood flow rate to dilute the dialysate
    3. Decrease the dialysate flow to 300 mL/min
    4. Continue the treatment and recheck the conductivity in 30 minutes

    Explanation

    Conductivity reflects the total ion concentration of dialysate, so an out-of-range reading means the prescribed dialysate composition is not being delivered. The machine must be placed in bypass so the patient is not exposed to incorrectly proportioned dialysate while the concentrate containers, connections, and proportioning system are checked.

  47. Question 47Dialysis Procedures and Equipment

    Which statement describes sodium modeling during hemodialysis?

    1. Dialysate sodium is adjusted according to the ultrafiltration goal only
    2. Dialysate sodium is held at 140 mEq/L throughout
    3. Dialysate sodium starts higher and is gradually lowered during treatment Correct answer.
    4. Dialysate sodium starts low and is increased toward the end

    Explanation

    Sodium modeling uses a higher dialysate sodium early in treatment and a lower value later to support plasma refilling and reduce cramps and hypotension. The total sodium load must still be considered, and the prescription is set by the physician.

  48. Question 48Dialysis Procedures and Equipment

    Which condition most likely causes a high venous pressure alarm?

    1. Clotting within the venous drip chamber Correct answer.
    2. A blood flow rate set too low
    3. Disconnection of the arterial needle from the access
    4. A kink in the arterial blood line

    Explanation

    Venous pressure rises when resistance downstream of the sensor increases, as with clotting, kinking of the venous line, infiltration, or a poorly positioned needle. Arterial-side problems produce low or negative arterial pressure alarms instead.

  49. Question 49Dialysis Procedures and Equipment

    A decreasing (more negative) arterial pressure reading during treatment is most consistent with which problem?

    1. An air bubble at the air detector
    2. A kink in the arterial line Correct answer.
    3. Excessive ultrafiltration
    4. A clot in the venous drip chamber

    Explanation

    Arterial pressure is measured between the access and the blood pump, so a more negative value means the pump is pulling against increased resistance or reduced supply. Needle malposition, arterial line kinking, and access stenosis are common causes.

  50. Question 50Dialysis Procedures and Equipment

    What is the AAMI maximum allowable level of total chlorine in water used to prepare dialysate?

    1. 0.01 mg/L
    2. 1.0 mg/L
    3. 0.1 mg/L Correct answer.
    4. 0.5 mg/L

    Explanation

    AAMI standards set the maximum total chlorine level at 0.1 mg/L in product water for dialysis. Testing is required before each patient shift and after carbon bed replacement because chlorine can cause hemolysis.

  51. Question 51Dialysis Procedures and Equipment

    A patient's pre-dialysis BUN is 80 mg/dL and the post-dialysis BUN is 24 mg/dL. What is the urea reduction ratio (URR)?

    1. 75%
    2. 60%
    3. 65%
    4. 70% Correct answer.

    Explanation

    URR is calculated as (pre-dialysis BUN minus post-dialysis BUN) divided by pre-dialysis BUN, multiplied by 100. (80 - 24) / 80 = 0.70, or 70%, which meets the commonly used adequacy threshold of 65%.

  52. Question 52Dialysis Procedures and Equipment

    What is the recommended immediate management of a suspected air embolism during dialysis?

    1. Flush the venous line with saline to move the air forward
    2. Aspirate air from the arterial line and continue treatment
    3. Place the patient in Trendelenburg on the left side with 100% oxygen Correct answer.
    4. Place the patient supine with the head and chest elevated and give oxygen

    Explanation

    Trendelenburg positioning on the left side helps trap air in the right ventricular apex away from the pulmonary outflow tract, and 100% oxygen supports oxygenation. The blood pump must be stopped, the venous line clamped, and emergency help summoned.

  53. Question 53Dialysis Procedures and Equipment

    For a dialyzer to be acceptable for reuse, total cell volume (TCV) should generally remain above what percentage of the baseline value?

    1. 80% Correct answer.
    2. 95%
    3. 50%
    4. 60%

    Explanation

    TCV measures the fiber bundle volume and reflects how much membrane surface remains patent after reprocessing. A value below 80% of the original indicates loss of surface area and the dialyzer is discarded.

  54. Question 54Dialysis Procedures and Equipment

    Which practice prevents precipitation of calcium carbonate in bicarbonate dialysate?

    1. Adding chlorine to the bicarbonate concentrate
    2. Mixing calcium and bicarbonate together in a single concentrate container
    3. Heating the bicarbonate concentrate before use
    4. Storing calcium and bicarbonate in separate concentrates until proportioning Correct answer.

    Explanation

    Calcium and magnesium precipitate as insoluble carbonates when combined with bicarbonate, so they are supplied in the acid concentrate while bicarbonate is supplied separately. Proportioning occurs at the machine just before use.

  55. Question 55Dialysis Procedures and Equipment

    What is the typical acceptable pH range for bicarbonate dialysate delivered to the dialyzer?

    1. 7.8 to 8.2
    2. 6.5 to 6.9
    3. 7.1 to 7.3 Correct answer.
    4. 6.0 to 6.4

    Explanation

    Bicarbonate dialysate is normally slightly alkaline, about pH 7.1 to 7.3, which is physiologic and minimizes precipitation. A low pH may indicate inadequate bicarbonate, and a high pH may cause calcium carbonate precipitation.

  56. Question 56Dialysis Procedures and Equipment

    A patient is prescribed a blood flow rate of 400 mL/min. Which dialysate flow rate is typically used with this prescription?

    1. 200 to 300 mL/min
    2. 300 to 400 mL/min
    3. 500 to 800 mL/min Correct answer.
    4. 100 to 200 mL/min

    Explanation

    Standard dialysate flow rates are 500 to 800 mL/min, generally set at about 1.5 to 2 times the blood flow rate. Higher dialysate flow improves clearance of small solutes up to a point limited by blood flow.

  57. Question 57Dialysis Procedures and Equipment

    What is the primary function of the reverse osmosis membrane in a dialysis water treatment system?

    1. Removing calcium and magnesium by ion exchange
    2. Removing chlorine and chloramine from the water
    3. Removing dissolved ions and bacteria Correct answer.
    4. Sterilizing the water with ultraviolet light

    Explanation

    Reverse osmosis forces water through a semipermeable membrane that rejects dissolved salts, bacteria, and endotoxins. Chlorine must be removed upstream by carbon because it degrades the RO membrane.

  58. Question 58Dialysis Procedures and Equipment

    During treatment a patient reports chest pain and dyspnea, and the blood in the arterial line appears dark red or port-wine colored. What is the most appropriate immediate action?

    1. Increase the blood flow rate to improve oxygenation
    2. Give a saline bolus and continue treatment
    3. Stop the blood pump and do not return the blood Correct answer.
    4. Continue treatment and document the finding at the end

    Explanation

    These findings suggest hemolysis, which may result from a dialysate problem such as hypotonic dialysate, overheating, or contamination. The extracorporeal blood is not returned because it may contain free hemoglobin and potassium, and the machine and water system must be investigated.

  59. Question 59Dialysis Procedures and Equipment

    Which situation most increases the risk of air entry into the vascular access during hemodialysis?

    1. A high venous pressure alarm reading
    2. A loose central catheter connection Correct answer.
    3. A high ultrafiltration rate
    4. A low dialysate flow rate

    Explanation

    Central venous catheters are exposed to negative intrathoracic pressure, so a loose cap or disconnection can draw air into the circulation. Needles in a fistula are less prone to air entry because the access is under positive pressure.

  60. Question 60Dialysis Procedures and Equipment

    Access recirculation occurs when which of the following happens?

    1. Ultrafiltrate is returned to the blood compartment
    2. Treated blood re-enters the arterial needle Correct answer.
    3. Blood circulates repeatedly through the blood pump tubing
    4. Dialysate flows backward through the dialyzer

    Explanation

    Recirculation is the reentry of dialyzed blood into the arterial needle, which reduces effective clearance and can make adequacy results look falsely low. It is caused by access outflow stenosis, needle placement too close together, or access flow less than the prescribed pump speed.

  61. Question 61Dialysis Procedures and Equipment

    A urea reduction ratio of 65% corresponds most closely to which single-pool Kt/V?

    1. 1.2 Correct answer.
    2. 2.0
    3. 1.6
    4. 0.8

    Explanation

    A URR of about 65% corresponds to a single-pool Kt/V of approximately 1.2, the commonly used minimum adequacy target. Kt/V rises nonlinearly with URR, so higher URR values reflect progressively larger Kt/V.

  62. Question 62Dialysis Procedures and Equipment

    Before a reprocessed dialyzer is used for treatment, which test is required?

    1. A hardness test of the feed water
    2. A chlorine test of the product water
    3. A conductivity check of the acid concentrate container
    4. A test for residual disinfectant in the dialyzer Correct answer.

    Explanation

    Reprocessed dialyzers retain disinfectant, so the residual must be tested and documented as absent or below the allowable limit before the dialyzer is used. Chlorine, hardness, and conductivity testing relate to the water and dialysate systems rather than the individual reused dialyzer.

  63. Question 63Dialysis Procedures and Equipment

    Which needle gauge is typically selected for a mature arteriovenous fistula when the prescribed blood flow is 400 mL/min?

    1. 16 gauge
    2. 12 gauge
    3. 15 gauge Correct answer.
    4. 17 gauge

    Explanation

    A 15-gauge needle is standard for adult fistula cannulation and supports blood flows around 350 to 450 mL/min. Larger gauges (smaller numbers) allow higher flows but increase the risk of access injury, while smaller gauges limit achievable flow.

  64. Question 64Dialysis Procedures and Equipment

    What is the purpose of priming the extracorporeal circuit with saline before dialysis?

    1. To verify dialysate conductivity
    2. To cool the dialysate to body temperature
    3. To disinfect the dialyzer before use
    4. To remove air and rinse manufacturing residue Correct answer.

    Explanation

    Priming fills the blood compartment and removes air so that the air detector and pressures function correctly and air is not infused. It also rinses residuals from the manufacturing process and allows a visual check for leaks.

  65. Question 65Dialysis Procedures and Equipment

    Which machine alarm is triggered when the dialysate heater fails and the dialysate temperature rises above the set limit?

    1. The blood leak alarm
    2. The temperature alarm Correct answer.
    3. The air detector alarm
    4. The conductivity alarm

    Explanation

    The temperature alarm activates when dialysate temperature leaves the acceptable range, and the machine diverts dialysate to bypass. Overheated dialysate can cause hemolysis, so treatment should not continue until the temperature is corrected.

  66. Question 66Dialysis Procedures and Equipment

    Why is dialysate flow directed countercurrent to blood flow in a dialyzer?

    1. To warm the dialysate before it reaches the dialyzer membrane
    2. To prevent clotting within the hollow fibers of the dialyzer
    3. To maintain a concentration gradient along the membrane Correct answer.
    4. To increase the patient's blood flow rate through the circuit

    Explanation

    Countercurrent flow keeps the concentration difference between blood and dialysate relatively constant along the length of the membrane, which maximizes diffusive clearance. Blood flow and dialysate temperature are controlled separately and are not the reason for countercurrent flow.

  67. Question 67Dialysis Procedures and Equipment

    Which pressure is measured in the tubing segment between the patient's vascular access and the blood pump?

    1. Transmembrane pressure
    2. Pre-pump arterial pressure Correct answer.
    3. Post-pump arterial pressure
    4. Venous pressure

    Explanation

    The pre-pump arterial pressure sensor monitors the suction side of the blood pump, between the access and the pump. Post-pump arterial pressure is measured after the pump, venous pressure near the return line, and transmembrane pressure across the dialyzer membrane.

  68. Question 68Dialysis Procedures and Equipment

    What is the primary function of the venous chamber in the extracorporeal circuit?

    1. To measure dialysate conductivity
    2. To regulate the ultrafiltration rate
    3. To trap air so it is not infused into the patient Correct answer.
    4. To add heparin to the returning blood

    Explanation

    The venous chamber allows air to separate from blood and rise to the top of the chamber, reducing the risk of air reaching the patient. Heparin is usually delivered on the arterial side, and ultrafiltration is controlled by the machine's UF system.

  69. Question 69Dialysis Procedures and Equipment

    What is the main purpose of the water softener in a dialysis water treatment system?

    1. To remove chlorine and chloramine
    2. To adjust the pH of the product water
    3. To remove calcium and magnesium Correct answer.
    4. To remove bacteria and endotoxin

    Explanation

    A water softener uses ion exchange to replace calcium and magnesium with sodium, reducing hardness that can damage the reverse osmosis membrane. Chlorine and chloramine are removed by carbon tanks, while bacteria and endotoxin are controlled by filtration and disinfection.

  70. Question 70Dialysis Procedures and Equipment

    During hemodialysis, the pre-dialyzer blood pressure is 150 mmHg, the post-dialyzer blood pressure is 50 mmHg, and the dialysate pressure is -50 mmHg. What is the transmembrane pressure (TMP)?

    1. 200 mmHg
    2. 150 mmHg Correct answer.
    3. 100 mmHg
    4. 250 mmHg

    Explanation

    TMP equals the mean blood compartment pressure minus the dialysate pressure. The mean blood pressure is (150 + 50) / 2 = 100 mmHg, and subtracting -50 mmHg gives 150 mmHg.

  71. Question 71Dialysis Procedures and Equipment

    The blood leak detector on a hemodialysis machine identifies a leak by sensing a change in which property of the dialysate?

    1. Temperature
    2. pH
    3. Light transmission Correct answer.
    4. Conductivity

    Explanation

    A photometric blood leak detector measures light passing through dialysate; blood cells or hemoglobin reduce light transmission and trigger the alarm. Conductivity, temperature, and pH are monitored by other sensors and are not used to detect blood leaks.

  72. Question 72Dialysis Procedures and Equipment

    What is the primary role of carbon filtration in a dialysis water treatment system?

    1. Removing bacteria and endotoxin
    2. Removing calcium and magnesium
    3. Adding bicarbonate to the treated water supply
    4. Removing chlorine, chloramine, and organics Correct answer.

    Explanation

    Carbon tanks adsorb chlorine, chloramine, and dissolved organic contaminants that could otherwise cross the dialyzer membrane and harm the patient. Calcium and magnesium are removed by softening, and bicarbonate is added later during dialysate proportioning.

  73. Question 73Dialysis Procedures and Equipment

    A patient is prescribed 3 liters of ultrafiltration over a 4-hour treatment. What average ultrafiltration rate does this require?

    1. 10 mL/min
    2. 7.5 mL/min
    3. 15 mL/min
    4. 12.5 mL/min Correct answer.

    Explanation

    Convert 3 liters to 3000 mL and divide by the treatment time in minutes: 3000 mL / 240 min = 12.5 mL/min. This is the average rate needed to remove the prescribed fluid volume.

  74. Question 74Dialysis Procedures and Equipment

    Which chemical is commonly used to disinfect the dialysate pathway and also helps dissolve carbonate scale?

    1. Citric acid Correct answer.
    2. Formaldehyde
    3. Sodium hypochlorite
    4. Saline

    Explanation

    Citric acid is used both as a disinfectant and as a descaling agent because it dissolves calcium carbonate deposits in the dialysate pathway. Bleach and formaldehyde disinfect but are not relied on for scale removal, and saline is not a disinfectant.

  75. Question 75Dialysis Procedures and Equipment

    The conductivity reading of dialysate is most closely related to the concentration of which solute?

    1. Calcium
    2. Sodium Correct answer.
    3. Glucose
    4. Potassium

    Explanation

    Sodium is the most abundant ion in dialysate and contributes most to its electrical conductivity. Conductivity therefore provides an indirect check that the dialysate is proportioned correctly.

  76. Question 76Dialysis Procedures and Equipment

    Where is the air detector typically located on the extracorporeal circuit?

    1. On the arterial chamber
    2. On the arterial line before the blood pump
    3. On the dialysate line entering the dialyzer
    4. On the venous line after the chamber Correct answer.

    Explanation

    The air detector is placed on the venous return line after the venous chamber so it can detect air before blood re-enters the patient. The arterial side is under negative pressure and is not the final safety checkpoint for air.

  77. Question 77Dialysis Procedures and Equipment

    A dialyzer with a higher KoA value has which characteristic?

    1. Greater urea clearance capacity at set flows Correct answer.
    2. A larger physical surface area only
    3. A thicker membrane with lower biocompatibility
    4. Greater resistance to water ultrafiltration

    Explanation

    KoA is the mass transfer-area coefficient for urea and reflects how efficiently the dialyzer clears urea at given blood and dialysate flow rates. A higher KoA indicates greater clearance capacity, not simply a larger surface area or lower water permeability.

  78. Question 78Dialysis Procedures and Equipment

    A patient requires 4 liters of ultrafiltration over a 3-hour treatment using a dialyzer with a Kuf of 25 mL/h/mmHg. Ignoring oncotic pressure, what TMP is required?

    1. 40 mmHg
    2. 48 mmHg
    3. 60 mmHg
    4. 53 mmHg Correct answer.

    Explanation

    The required UF rate is 4000 mL / 3 h = 1333 mL/h. Dividing by Kuf gives 1333 / 25 = 53.3 mmHg, which rounds to 53 mmHg.

  79. Question 79Dialysis Procedures and Equipment

    Why is ultrapure dialysate particularly important when a high-flux dialyzer is used?

    1. High-flux dialyzers cannot be disinfected between treatments
    2. Larger membrane pores can allow backfiltration of dialysate Correct answer.
    3. High-flux membranes eliminate the need for anticoagulation
    4. High-flux dialyzers require a lower blood flow rate

    Explanation

    High-flux membranes are more permeable, and pressure gradients can drive dialysate backward into the blood compartment. Ultrapure dialysate reduces the risk of pyrogenic reactions and bacteremia from that backfiltration.

  80. Question 80Dialysis Procedures and Equipment

    A hemodialysis machine uses volumetric ultrafiltration control. What does this mean?

    1. Ultrafiltration is controlled by the patient's pre-treatment weight
    2. By balancing dialysate flow into and out of the dialyzer Correct answer.
    3. Ultrafiltration is controlled by the blood pump speed alone
    4. Ultrafiltration is controlled by adjusting only the TMP setpoint

    Explanation

    Volumetric control uses flow meters or balance chambers to measure dialysate entering and leaving the dialyzer, so the net difference equals the fluid removed. This makes ultrafiltration relatively independent of changes in TMP and membrane permeability.

  81. Question 81Water Treatment and Dialysate Preparation

    When should the total chlorine level of water used for hemodialysis be checked?

    1. Monthly at a sample port located before the carbon tanks
    2. Only when a new carbon tank is installed
    3. Once a week at the start of the first shift
    4. Before each shift and after any carbon tank backwash or replacement Correct answer.

    Explanation

    Total chlorine must be checked before each shift and after any carbon tank backwash or replacement, using a sample taken after the carbon tanks. This confirms that chlorine and chloramine are being removed before water reaches the dialysate circuit.

  82. Question 82Water Treatment and Dialysate Preparation

    What is the primary purpose of granular activated carbon in a dialysis water treatment system?

    1. Removing dissolved salts by reverse osmosis
    2. Removing bacteria and endotoxin
    3. Removing calcium and magnesium ions
    4. Removing chlorine and chloramine Correct answer.

    Explanation

    Granular activated carbon adsorbs chlorine and chloramine, which can otherwise cause hemolysis in dialysis patients. It does not remove significant amounts of dissolved ions or serve as the main barrier for bacteria and endotoxin.

  83. Question 83Water Treatment and Dialysate Preparation

    A water softener in a dialysis water system removes primarily which substances?

    1. Calcium and magnesium Correct answer.
    2. Sodium and potassium
    3. Bacteria and viruses
    4. Chlorine and chloramine

    Explanation

    A water softener uses ion exchange resin to exchange calcium and magnesium for sodium. This reduces water hardness and helps prevent scaling of the reverse osmosis membrane and dialysate circuit.

  84. Question 84Water Treatment and Dialysate Preparation

    Which component removes the largest proportion of dissolved ions from dialysis water?

    1. Water softener
    2. Carbon tank
    3. Sediment filter
    4. Reverse osmosis membrane Correct answer.

    Explanation

    The reverse osmosis membrane rejects most dissolved ions, along with bacteria and endotoxin, producing product water with low conductivity. The other components provide pretreatment or limited removal.

  85. Question 85Water Treatment and Dialysate Preparation

    What does the conductivity reading of dialysate primarily reflect?

    1. Chlorine concentration
    2. Acidity or alkalinity of the solution
    3. Bacterial contamination level
    4. Total concentration of dissolved ions Correct answer.

    Explanation

    Conductivity measures the ability of the solution to carry electrical current, which is proportional to the total concentration of dissolved ions. It does not identify which ions are present or measure bacteria, chlorine, or pH directly.

  86. Question 86Water Treatment and Dialysate Preparation

    The pH of freshly prepared bicarbonate dialysate is typically in which range?

    1. 5.0 to 5.5
    2. 8.5 to 9.0
    3. 9.5 to 10.0
    4. 7.0 to 7.4 Correct answer.

    Explanation

    Final bicarbonate dialysate is formulated to have a pH near the physiologic range, typically about 7.0 to 7.4. The acid concentrate is acidic before dilution, but the proportioned final dialysate is near neutral.

  87. Question 87Water Treatment and Dialysate Preparation

    Why must liquid bicarbonate concentrate be handled carefully and not stored for prolonged periods after opening?

    1. It supports bacterial growth and can form precipitates Correct answer.
    2. It evaporates quickly at room temperature
    3. It is highly corrosive to plastic containers
    4. It loses sodium through the concentrate filter

    Explanation

    Bicarbonate concentrate provides a favorable environment for bacterial growth and can precipitate, especially if exposed to air or stored too long. Standard practice is to use opened bicarbonate within a limited time, generally 24 hours, and to keep it covered.

  88. Question 88Water Treatment and Dialysate Preparation

    After chemical disinfection of a dialysis water system, what must be verified before the system is used for patient treatment?

    1. That disinfectant residual has been rinsed to a safe level Correct answer.
    2. That the reverse osmosis reject rate is exactly 50%
    3. That the disinfectant pH is alkaline
    4. That the carbon tank is completely full

    Explanation

    Chemical disinfectants must be thoroughly rinsed from the water system, and testing must confirm that residual disinfectant is below the safe limit before patient use. Residual disinfectant can be toxic to patients and can damage the dialyzer.

  89. Question 89Water Treatment and Dialysate Preparation

    What is the maximum allowable total chlorine level in water used to prepare dialysate?

    1. 2.0 mg/L
    2. 1.0 mg/L
    3. 0.1 mg/L Correct answer.
    4. 0.5 mg/L

    Explanation

    The AAMI standard sets the maximum total chlorine level at 0.1 mg/L in water used for dialysate. If the level exceeds this limit, dialysis should be stopped and the carbon tanks evaluated.

  90. Question 90Water Treatment and Dialysate Preparation

    After regeneration of a water softener, which test confirms that it is working properly?

    1. Water hardness test Correct answer.
    2. Resistivity test
    3. Endotoxin assay
    4. Total chlorine test

    Explanation

    A hardness test measures calcium and magnesium leakage from the softener. After proper regeneration, hardness should be very low, generally less than 1 grain per gallon.

  91. Question 91Water Treatment and Dialysate Preparation

    Chloramine that breaks through a carbon tank can cause which patient problem?

    1. Hypocalcemia
    2. Hyperkalemia
    3. Metabolic alkalosis
    4. Hemolysis and anemia Correct answer.

    Explanation

    Chloramine is an oxidant that can damage red blood cells, leading to hemolysis and anemia. This is why total chlorine testing after the carbon tanks is required before each shift.

  92. Question 92Water Treatment and Dialysate Preparation

    Long-term exposure to aluminum in dialysis water is associated with which complication?

    1. Osteomalacia and encephalopathy Correct answer.
    2. Hypernatremia
    3. Hemolysis
    4. Metabolic acidosis

    Explanation

    Aluminum accumulates in bone and brain tissue and has been associated with osteomalacia and dialysis encephalopathy. Reverse osmosis and deionization are important for reducing aluminum in dialysis water.

  93. Question 93Water Treatment and Dialysate Preparation

    What minimum empty bed contact time is recommended for carbon tanks in a dialysis water system?

    1. 30 seconds total
    2. 60 minutes total
    3. 2 minutes total
    4. 10 minutes total Correct answer.

    Explanation

    AAMI recommends a minimum total empty bed contact time of about 10 minutes through the carbon tanks, often achieved with two tanks in series. Adequate contact time allows carbon to adsorb chlorine and chloramine effectively.

  94. Question 94Water Treatment and Dialysate Preparation

    An RO membrane receives feed water with a conductivity of 400 microsiemens/cm and produces product water with a conductivity of 20 microsiemens/cm. What is the percent rejection?

    1. 95% Correct answer.
    2. 5%
    3. 20%
    4. 80%

    Explanation

    Percent rejection is calculated as (feed conductivity minus product conductivity) divided by feed conductivity, multiplied by 100. Here, (400 minus 20) divided by 400 equals 0.95, or 95% rejection.

  95. Question 95Water Treatment and Dialysate Preparation

    In a two-tank carbon system, water for chlorine testing should be sampled from which location?

    1. After the second carbon tank Correct answer.
    2. Between the two carbon tanks
    3. From the reverse osmosis reject line
    4. Before the first carbon tank

    Explanation

    The sample should be taken after the final carbon tank, at maximal water flow, because this represents the treated water that will reach the dialysate circuit. Testing after the last tank detects breakthrough from the entire carbon system.

  96. Question 96Water Treatment and Dialysate Preparation

    How often should the product water of a dialysis water treatment system be cultured for bacteria?

    1. Every week
    2. Every six months
    3. Monthly Correct answer.
    4. Every shift

    Explanation

    AAMI standards recommend monthly bacterial culture of product water, with more frequent testing when problems are identified. Monthly surveillance helps detect biofilm or contamination trends before they affect patients.

  97. Question 97Water Treatment and Dialysate Preparation

    What is the AAMI maximum allowable endotoxin concentration in standard dialysate?

    1. 10 EU/mL
    2. 0.1 EU/mL
    3. 2 EU/mL Correct answer.
    4. 0.03 EU/mL

    Explanation

    Standard dialysate must contain no more than 2 EU/mL of endotoxin. Ultrapure dialysate has a stricter limit, typically 0.03 EU/mL.

  98. Question 98Water Treatment and Dialysate Preparation

    A dialysate conductivity reading that is higher than prescribed may be caused by which of the following?

    1. An over-concentrated acid concentrate Correct answer.
    2. A water leak into the dialysate circuit
    3. A clogged bicarbonate filter
    4. A depleted bicarbonate concentrate

    Explanation

    Conductivity rises when the concentration of dissolved ions rises. An over-concentrated acid concentrate adds more ions than prescribed and can produce a high conductivity alarm.

  99. Question 99Water Treatment and Dialysate Preparation

    Which situation would most likely produce a dialysate conductivity reading below the prescribed range?

    1. The acid concentrate is over-proportioned
    2. The acid concentrate is depleted Correct answer.
    3. The bicarbonate concentrate is too concentrated
    4. The conductivity meter is reading falsely high

    Explanation

    A depleted acid concentrate means fewer dissolved ions are delivered to the dialysate, so conductivity falls below the prescribed range. The machine should alarm and treatment should not proceed until the cause is corrected.

  100. Question 100Water Treatment and Dialysate Preparation

    What is the purpose of an air gap or backflow preventer in a dialysis water system?

    1. To prevent contaminated water from flowing back into the potable water supply Correct answer.
    2. To increase water pressure to the reverse osmosis unit
    3. To cool the water before it reaches the reverse osmosis membrane
    4. To remove chlorine from the incoming water

    Explanation

    An air gap or backflow preventer protects the public potable water supply from contamination by preventing reverse flow from the dialysis water system. This is a required plumbing safety feature.

  101. Question 101Water Treatment and Dialysate Preparation

    What is the usual temperature at which dialysate is delivered to the dialyzer?

    1. 25 °C
    2. 37 °C Correct answer.
    3. 42 °C
    4. 30 °C

    Explanation

    Dialysate is typically warmed to about 37 °C, close to normal body temperature. Machines have temperature alarms to prevent dangerous overheating or excessive cooling.

  102. Question 102Water Treatment and Dialysate Preparation

    Once a container of liquid bicarbonate concentrate is opened, how long can it generally be used?

    1. 72 hours
    2. 30 days
    3. 24 hours Correct answer.
    4. 7 days

    Explanation

    Opened liquid bicarbonate concentrate is generally used within 24 hours because it supports bacterial growth and can deteriorate over time. Facilities should also follow the manufacturer's specific directions.

  103. Question 103Water Treatment and Dialysate Preparation

    What is the role of ultraviolet light in a dialysis water system?

    1. Softening hard water
    2. Removing dissolved ions
    3. Reducing bacterial counts Correct answer.
    4. Removing chlorine

    Explanation

    Ultraviolet light at a germicidal wavelength damages microbial DNA and helps reduce bacterial counts in the water. It does not remove dissolved ions, chlorine, or water hardness.

  104. Question 104Water Treatment and Dialysate Preparation

    An ultrafilter placed in the dialysate circuit is used primarily to do what?

    1. Adjust dialysate pH
    2. Retain bacteria and endotoxin Correct answer.
    3. Add calcium to the dialysate
    4. Remove bicarbonate

    Explanation

    An ultrafilter has pores small enough to retain bacteria and endotoxin while allowing water and small solutes to pass. It does not intentionally alter the electrolyte composition or pH of dialysate.

  105. Question 105Water Treatment and Dialysate Preparation

    For a bacterial culture of a dialysis water system, where should the sample be collected?

    1. From the disinfectant container
    2. At a sample port at the end of the distribution loop Correct answer.
    3. From the brine tank
    4. From the reverse osmosis feed water line

    Explanation

    Samples for bacterial culture should be collected at a sample port at the end of the distribution loop, representing the water delivered to the dialysis machines. Sampling at the distal point helps detect contamination that could reach patients.

  106. Question 106Water Treatment and Dialysate Preparation

    What is the main purpose of a water softener in a dialysis water treatment system?

    1. Remove hardness minerals Correct answer.
    2. Remove chlorine and chloramine
    3. Remove bacteria and endotoxin
    4. Remove dissolved gases

    Explanation

    A water softener uses cation exchange resin to replace calcium and magnesium with sodium. This reduces hardness that could scale downstream RO membranes.

  107. Question 107Water Treatment and Dialysate Preparation

    A sediment prefilter placed before the RO membrane is designed primarily to do what?

    1. Add sodium to the water
    2. Adjust water pH
    3. Trap particulate matter Correct answer.
    4. Remove dissolved ions

    Explanation

    Sediment prefilters capture suspended particles before they reach the RO membrane. This protects the membrane and downstream components from fouling.

  108. Question 108Water Treatment and Dialysate Preparation

    What do deionization (DI) tanks primarily remove from water?

    1. Dissolved ions Correct answer.
    2. Chlorine and chloramine
    3. Bacteria and endotoxin
    4. Suspended sediment

    Explanation

    Deionization uses ion exchange resins to remove dissolved ionic contaminants from water. It does not reliably remove particles, bacteria, or dissolved organic chlorine compounds.

  109. Question 109Water Treatment and Dialysate Preparation

    Dialysate used in hemodialysis is best described as which of the following?

    1. Sterile normal saline for infusion
    2. Untreated municipal drinking water
    3. Treated water plus concentrates Correct answer.
    4. RO product water used by itself

    Explanation

    Dialysate is prepared by proportioning treated water with acid and bicarbonate concentrates. RO product water alone is not dialysate.

  110. Question 110Water Treatment and Dialysate Preparation

    Why are the acid and bicarbonate components of dialysate kept separate until they are mixed at the machine?

    1. To prevent carbonate salt precipitation Correct answer.
    2. To maintain neutral pH in both concentrates
    3. To keep the bicarbonate from freezing
    4. To prevent bacterial growth in the acid

    Explanation

    Calcium and magnesium in the acid concentrate can form insoluble carbonate salts when combined with bicarbonate at a higher pH. Keeping the components separate until proportioning prevents precipitation.

  111. Question 111Water Treatment and Dialysate Preparation

    What role does acetic acid play in the acid concentrate of a bicarbonate dialysate system?

    1. It lowers pH to prevent scaling Correct answer.
    2. It raises dialysate conductivity
    3. It acts as the main buffer for the patient
    4. It disinfects the dialysate circuit

    Explanation

    Acetic acid acidifies the concentrate so calcium and magnesium remain soluble and do not precipitate as carbonates. This helps keep the dialysate circuit clear.

  112. Question 112Water Treatment and Dialysate Preparation

    A water softener has exhausted its exchange capacity. What is the most likely consequence for the RO system?

    1. Chlorine breakthrough
    2. Membrane scaling by hardness Correct answer.
    3. Increased product water flow
    4. Lower feed water pressure

    Explanation

    When softener resin is exhausted, calcium and magnesium pass through and can precipitate on the RO membrane. This scaling reduces performance and can damage the membrane.

  113. Question 113Water Treatment and Dialysate Preparation

    How is a water softener restored to service after its resin becomes saturated?

    1. Treated with a chlorine solution
    2. Rinsed with sodium chloride brine Correct answer.
    3. Heated to 80 degrees Celsius overnight
    4. Flushed with RO product water for an hour

    Explanation

    Regeneration passes concentrated sodium chloride brine through the resin. Sodium replaces the bound calcium and magnesium, restoring softening capacity.

  114. Question 114Water Treatment and Dialysate Preparation

    Why is water that has passed through a softener not acceptable as the sole water treatment for dialysis?

    1. Softening removes all minerals, making water too pure
    2. Softening removes bicarbonate
    3. Softening increases bacterial contamination
    4. Softening adds sodium and leaves other contaminants Correct answer.

    Explanation

    Softening exchanges hardness ions for sodium and does not remove most other dissolved contaminants. Dialysis water therefore requires additional treatment such as RO and carbon filtration.

  115. Question 115Water Treatment and Dialysate Preparation

    Which test is used to confirm that a carbon tank is removing chlorine and chloramine?

    1. Total chlorine by DPD method Correct answer.
    2. pH measurement of the product water
    3. Hardness titration of the softener effluent
    4. Conductivity measurement of the feed water

    Explanation

    Total chlorine testing detects both free chlorine and combined chloramines after carbon treatment. It is the appropriate check for carbon tank breakthrough.

  116. Question 116Water Treatment and Dialysate Preparation

    What is the difference between free chlorine and total chlorine in water testing?

    1. Total chlorine measures only chlorine gas
    2. Free chlorine includes chloramines
    3. Total chlorine includes free chlorine plus chloramines Correct answer.
    4. Free chlorine is always higher than total chlorine

    Explanation

    Total chlorine is the sum of free chlorine and combined chlorine compounds such as chloramines. Free chlorine measures only the uncombined active form.

  117. Question 117Water Treatment and Dialysate Preparation

    What is the purpose of the reject (waste) stream from an RO membrane?

    1. It carries product water to the storage tank
    2. It sends impurities to drain Correct answer.
    3. It supplies water to the softener
    4. It provides water for dialysate mixing

    Explanation

    The reject stream carries water containing concentrated dissolved and suspended impurities away from the membrane. Product water is the stream that passes through the membrane.

  118. Question 118Water Treatment and Dialysate Preparation

    A carbon tank shows an unexpectedly early chlorine breakthrough after several months of service. Which condition most likely explains this finding?

    1. Low water temperature
    2. A carbon bed replaced last week
    3. Excessive backwash flow rate
    4. Channeling within the bed Correct answer.

    Explanation

    Channeling creates preferential paths through the carbon bed, so water bypasses much of the carbon and contact time is reduced. This can cause premature chlorine breakthrough.

  119. Question 119Water Treatment and Dialysate Preparation

    A dialysis machine's proportioning system alarms for low water pressure. What is the most direct effect on dialysate preparation?

    1. The bicarbonate concentrate becomes too concentrated
    2. The machine may not achieve the correct mixing ratio Correct answer.
    3. The RO membrane will rupture
    4. The conductivity cell will read falsely low only

    Explanation

    Proportioning systems require adequate water pressure and flow to combine water and concentrates in the correct ratio. Low pressure can prevent accurate proportioning and trigger an alarm.

  120. Question 120Water Treatment and Dialysate Preparation

    The product water conductivity from an RO system rises sharply while feed conductivity is unchanged. Which action is most appropriate before using the water for dialysis?

    1. Increase the dialysate sodium setting
    2. Continue treatment if the water looks clear
    3. Divert the water to drain and investigate the RO system Correct answer.
    4. Recalibrate the dialysis machine's conductivity meter only

    Explanation

    A rising product conductivity with stable feed conductivity suggests loss of membrane rejection or another RO fault. The water should be diverted and not used for dialysis until the problem is corrected and verified.

  121. Question 121Infection Control and Patient Safety

    A technician is about to begin a patient's hemodialysis treatment. What is the most appropriate hand hygiene action immediately before touching the patient?

    1. Put on clean gloves without performing hand hygiene
    2. Wipe the hands with a paper towel
    3. Rinse the hands briefly with water only
    4. Perform hand hygiene with soap and water or an alcohol-based rub Correct answer.

    Explanation

    Hand hygiene is required before and after every patient contact. Gloves do not replace hand hygiene, and water alone or a dry towel does not remove pathogens effectively.

  122. Question 122Infection Control and Patient Safety

    Which personal protective equipment is appropriate when initiating a hemodialysis treatment and blood splash is likely?

    1. A surgical mask only
    2. Gloves only
    3. Shoe covers only
    4. Gloves, gown, and eye or face protection Correct answer.

    Explanation

    Standard precautions require PPE selected according to the anticipated exposure. When blood splash is likely, gloves, a gown, and eye or face protection are needed.

  123. Question 123Infection Control and Patient Safety

    Where should used fistula needles be placed after cannulation?

    1. In a puncture-resistant sharps container near the point of use Correct answer.
    2. On top of the dialysis machine
    3. In the regular trash
    4. Recapped using both hands and then discarded

    Explanation

    Used needles must be discarded immediately in a puncture-resistant sharps container located close to the point of use. Recapping by hand increases the risk of needlestick injury.

  124. Question 124Infection Control and Patient Safety

    Which infection is preventable by a vaccine recommended for susceptible hemodialysis patients and staff?

    1. Human immunodeficiency virus
    2. Hepatitis C
    3. Hepatitis B Correct answer.
    4. Methicillin-resistant Staphylococcus aureus

    Explanation

    Hepatitis B vaccination is recommended for susceptible dialysis patients and staff. There is no routine vaccine for hepatitis C, HIV, or MRSA.

  125. Question 125Infection Control and Patient Safety

    After removing gloves following patient care, what should the technician do?

    1. Put on a new pair of gloves without hand hygiene
    2. Wipe the hands on the gown
    3. Apply hand lotion before touching the next patient
    4. Perform hand hygiene Correct answer.

    Explanation

    Hand hygiene is performed immediately after glove removal because gloves may have defects or may contaminate the hands during removal. Lotion or gowns are not substitutes for hand hygiene.

  126. Question 126Infection Control and Patient Safety

    A patient with a tunneled hemodialysis catheter is being connected. What should the patient and technician wear during the connection?

    1. Gloves only
    2. No mask is needed if the catheter dressing is clean
    3. Surgical masks covering the nose and mouth Correct answer.
    4. N95 respirators only

    Explanation

    Both the patient and the technician should wear surgical masks during catheter connection to reduce contamination of the catheter hub and bloodstream. N95 respirators are not required for this routine precaution.

  127. Question 127Infection Control and Patient Safety

    When should a technician change gloves during patient care?

    1. At the end of the shift
    2. Between patients and whenever gloves are torn or heavily contaminated Correct answer.
    3. After each hour of treatment
    4. Only when the gloves are visibly bloody

    Explanation

    Gloves must be changed between patients and whenever they are torn, punctured, or heavily contaminated. Time-based or shift-based changing does not meet infection control standards.

  128. Question 128Infection Control and Patient Safety

    What is the correct way to clean a blood spill on the dialysis floor?

    1. Apply alcohol and wipe once
    2. Sweep the spill with a broom
    3. Rinse the area with water only
    4. Wear PPE, absorb the spill, clean with detergent, and disinfect with an EPA-registered disinfectant Correct answer.

    Explanation

    Blood spills require PPE and removal of visible material before cleaning and disinfection. An EPA-registered disinfectant with the appropriate contact time is used after cleaning.

  129. Question 129Infection Control and Patient Safety

    A dialysis patient has active pulmonary tuberculosis. Which precautions are required?

    1. Contact precautions with gown and gloves only
    2. Droplet precautions with a surgical mask only
    3. Standard precautions only
    4. Airborne precautions with an N95 respirator and a negative-pressure room when available Correct answer.

    Explanation

    Active pulmonary tuberculosis is transmitted by airborne route, so airborne precautions are required. An N95 respirator and negative-pressure ventilation reduce exposure.

  130. Question 130Infection Control and Patient Safety

    Which patient should be dialyzed in a separate room with a dedicated machine?

    1. A patient with hepatitis B surface antigen Correct answer.
    2. A patient with HIV
    3. A patient with hepatitis C
    4. A patient with nasal MRSA colonization

    Explanation

    Hepatitis B surface antigen-positive patients require separation and dedicated equipment to prevent transmission in dialysis units. Hepatitis C, HIV, and MRSA are managed with standard or contact precautions as indicated.

  131. Question 131Infection Control and Patient Safety

    During a tunneled catheter dressing change, which action is correct?

    1. Apply antibiotic ointment to the catheter hub
    2. Clean from the soiled area toward the exit site
    3. Cleanse the exit site with an antiseptic and let it dry before applying a sterile dressing Correct answer.
    4. Reuse the old dressing if it appears dry

    Explanation

    The exit site should be cleansed with an appropriate antiseptic and allowed to dry before a sterile dressing is applied. Cleaning should move from clean to dirty areas, and dressings should not be reused.

  132. Question 132Infection Control and Patient Safety

    Why are dialysis machine surfaces cleaned and disinfected between patients?

    1. To remove visible dust only
    2. To sterilize the internal fluid pathways
    3. To improve the machine's alarm function
    4. To reduce the risk of transmitting bloodborne pathogens and environmental organisms Correct answer.

    Explanation

    Surface cleaning and disinfection reduce contamination that could transmit bloodborne pathogens or environmental organisms between patients. Internal fluid pathways require a separate disinfection process.

  133. Question 133Infection Control and Patient Safety

    A technician sustains a needlestick from a needle used on a patient with hepatitis C. What should the technician do first?

    1. Wait for symptoms before seeking care
    2. Squeeze the wound and apply bleach
    3. Wash the site with soap and water and report the exposure immediately Correct answer.
    4. Ignore the exposure if no blood is visible

    Explanation

    After a needlestick, wash the site with soap and water and report the exposure promptly so post-exposure evaluation can occur. Bleach and squeezing are not recommended, and symptoms may not appear for a long time.

  134. Question 134Infection Control and Patient Safety

    Which practice is correct when preparing a fistula for cannulation?

    1. Palpate the site after cleansing without re-cleansing
    2. Use alcohol only and insert the needle immediately
    3. Cleanse the site with an antiseptic and allow it to dry before insertion Correct answer.
    4. Shave the site with a razor before cleansing

    Explanation

    The cannulation site should be cleansed with an antiseptic and allowed to dry to maximize antimicrobial effect. Palpating after cleansing requires re-cleansing because it contaminates the site.

  135. Question 135Infection Control and Patient Safety

    Which action is appropriate for a patient with Clostridioides difficile diarrhea?

    1. Use soap and water for hand hygiene and wear gown and gloves Correct answer.
    2. Place the patient in airborne isolation
    3. Alcohol-based hand rub is preferred over soap and water
    4. Standard precautions alone are sufficient

    Explanation

    C. difficile requires contact precautions, including gown and gloves. Soap and water are preferred for hand hygiene because alcohol does not reliably kill C. difficile spores.

  136. Question 136Infection Control and Patient Safety

    A blood pressure cuff is used on multiple dialysis patients. What is the correct practice?

    1. Clean and disinfect it between patients or use a dedicated cuff Correct answer.
    2. Turn it inside out between patients
    3. Spray it with water between uses
    4. Use it only on patients with intact skin

    Explanation

    Reusable patient care equipment such as blood pressure cuffs must be cleaned and disinfected between patients or dedicated to one patient. Intact skin does not eliminate the risk of contamination.

  137. Question 137Infection Control and Patient Safety

    What is the correct sequence for removing PPE after a treatment with splash risk?

    1. Gown, mask, gloves, eye protection, then hand hygiene
    2. Gloves, gown, eye protection, mask, then hand hygiene Correct answer.
    3. Mask, gloves, gown, eye protection, then hand hygiene
    4. Eye protection, mask, gloves, gown, then hand hygiene

    Explanation

    PPE is removed from the most contaminated items first, with the mask removed last to avoid contaminating the face. Hand hygiene is performed after all PPE is removed.

  138. Question 138Infection Control and Patient Safety

    A dialysis machine surface has visible blood on it. What is the correct first step?

    1. Spray disinfectant directly on the blood and wipe after 10 minutes
    2. Wear PPE and remove visible blood with an absorbent towel before cleaning and disinfecting Correct answer.
    3. Use a disinfectant wipe only, without removing the blood
    4. Rinse the surface with water and continue treatment

    Explanation

    Visible organic material must be removed before disinfection because blood can reduce disinfectant effectiveness. PPE is worn, the spill is absorbed, and then the surface is cleaned and disinfected.

  139. Question 139Infection Control and Patient Safety

    A dialysate culture grows 250 CFU/mL. What action is required?

    1. Repeat the culture in 3 months
    2. Continue using the system because the result is below 500 CFU/mL
    3. Stop using the system and investigate and remediate because the result exceeds the limit Correct answer.
    4. Increase the disinfectant dose without further testing

    Explanation

    The AAMI dialysate bacterial limit is less than 200 CFU/mL, so 250 CFU/mL exceeds the acceptable level. The system should be investigated and remediated before further use.

  140. Question 140Infection Control and Patient Safety

    Which practice is required when using a multiple-dose medication vial for hemodialysis patients?

    1. Store the vial at the bedside for use by all patients in the bay
    2. Reuse the syringe if the needle is changed
    3. Dedicate the vial to a single patient when possible and never reuse a needle or syringe to access it Correct answer.
    4. Wipe the stopper with alcohol once per shift

    Explanation

    Multiple-dose vials can become contaminated and transmit pathogens if accessed unsafely. Whenever possible, medications should be dedicated to one patient, and needles and syringes must never be reused.

  141. Question 141Infection Control and Patient Safety

    How should a catheter hub be treated before connecting a dialysis line?

    1. Wipe the hub once with alcohol and connect immediately
    2. Blow on the hub to speed drying
    3. Scrub the hub with an antiseptic for the recommended contact time and allow it to dry Correct answer.
    4. Rinse the hub with tap water

    Explanation

    Catheter hubs must be scrubbed with an appropriate antiseptic and allowed to dry for the recommended contact time before connection. Connecting immediately or using tap water undermines antisepsis.

  142. Question 142Infection Control and Patient Safety

    Which practice helps prevent air embolism during use of a hemodialysis catheter?

    1. Secure connections with tape only
    2. Keep the catheter clamped when not in use and use luer-lock connections Correct answer.
    3. Flush the catheter with air before use
    4. Leave the catheter uncapped between uses

    Explanation

    Air embolism is prevented by keeping catheter lumens clamped when not in use and using secure luer-lock connections. Leaving the catheter open or flushing with air can allow air entry.

  143. Question 143Infection Control and Patient Safety

    An unvaccinated technician sustains a needlestick from a source patient who is hepatitis B surface antigen positive. What should happen?

    1. Take oral antibiotics for one week
    2. No action is needed if the needle was not visibly bloody
    3. Report immediately and receive post-exposure prophylaxis, including hepatitis B immune globulin and vaccine as indicated Correct answer.
    4. Check liver enzymes in one year

    Explanation

    Hepatitis B exposure in an unvaccinated person requires prompt reporting and post-exposure prophylaxis, which may include hepatitis B immune globulin and vaccination. Delaying evaluation increases the risk of infection.

  144. Question 144Infection Control and Patient Safety

    A patient's arteriovenous graft has redness and purulence at a cannulation site. What should the technician do?

    1. Cannulate through the purulent area to drain it
    2. Notify the care team, avoid cannulating the infected area, and use appropriate precautions Correct answer.
    3. Ignore the finding if the patient has no fever
    4. Apply a tight bandage and proceed with treatment

    Explanation

    Redness and purulence at an access site suggest infection and must be reported. The infected area should not be cannulated, and appropriate precautions should be used while the care team evaluates the patient.

  145. Question 145Infection Control and Patient Safety

    How should linens contaminated with blood be handled?

    1. Shake them out before bagging
    2. Place them in a leak-resistant bag and handle them as contaminated laundry Correct answer.
    3. Discard them in the regular trash
    4. Rinse them in the handwashing sink

    Explanation

    Contaminated linens are placed in a leak-resistant bag and handled as contaminated laundry to prevent exposure. Shaking, discarding in regular trash, or rinsing in a handwashing sink creates contamination hazards.

  146. Question 146Infection Control and Patient Safety

    A technician's hands are visibly soiled with blood after disconnecting a patient. What is the correct hand hygiene action?

    1. Use alcohol rub and then gloves
    2. Wash with soap and water Correct answer.
    3. Use alcohol-based hand rub only
    4. Wipe with a dry paper towel

    Explanation

    Visibly soiled hands must be washed with soap and water because alcohol-based hand rubs are not effective when organic material such as blood is present. Hand hygiene should be performed immediately after contact with blood or body fluids.

  147. Question 147Infection Control and Patient Safety

    Which practice is recommended for an unvaccinated patient who is starting maintenance hemodialysis and has no evidence of hepatitis B immunity?

    1. Test dialysate for hepatitis B monthly
    2. Complete the hepatitis B vaccine series Correct answer.
    3. Dialyze only with a dedicated machine
    4. Isolate in a separate room permanently

    Explanation

    Susceptible dialysis patients should receive and complete the hepatitis B vaccine series to reduce the risk of transmission in the dialysis setting. Vaccination is recommended for patients without evidence of immunity.

  148. Question 148Infection Control and Patient Safety

    After giving a dialysis treatment, a technician has a used needle and syringe. What should be done with them?

    1. Recap the needle and place it in trash
    2. Place it in a sharps container Correct answer.
    3. Place it in a red biohazard bag
    4. Break the needle off and discard it

    Explanation

    Used needles and syringes should be placed directly into a puncture-resistant sharps container immediately after use. Recapping, breaking, or placing sharps in bags increases the risk of needlestick injury.

  149. Question 149Infection Control and Patient Safety

    Standard precautions should be applied to which dialysis patients?

    1. Only patients with known bloodborne infection
    2. Only patients new to the unit
    3. Only patients with visible bleeding
    4. All patients regardless of diagnosis Correct answer.

    Explanation

    Standard precautions are based on treating all blood and body fluids as potentially infectious and apply to every patient regardless of diagnosis. Infection status should not determine whether routine barriers and hand hygiene are used.

  150. Question 150Infection Control and Patient Safety

    A technician who provides direct patient care has long artificial fingernails. Why is this a concern?

    1. They cause gloves to fit too tightly
    2. They interfere with the machine's alarm buttons
    3. They harbor pathogens and are prohibited Correct answer.
    4. They are allowed if the polish is clear

    Explanation

    Artificial nails and nail extenders can harbor pathogens and are not permitted for healthcare personnel who have direct patient contact. Natural nails should be kept short and clean to support effective hand hygiene.

  151. Question 151Infection Control and Patient Safety

    A dialyzer is reprocessed for a specific patient. How should it be stored before its next use?

    1. Stored unlabeled in the clean utility room
    2. Placed in a shared bin with other dialyzers
    3. Kept uncapped and filled with bleach
    4. Labeled and stored separately for that patient Correct answer.

    Explanation

    A reprocessed dialyzer must be labeled for the individual patient and stored separately to prevent cross-contamination. Shared or unlabeled storage can lead to a dialyzer being used on the wrong patient.

  152. Question 152Infection Control and Patient Safety

    The water treatment system's chlorine/chloramine test shows a breakthrough above the limit. What is the correct immediate action?

    1. Flush dialysate lines with bleach during treatment
    2. Stop dialysis until the water system is corrected Correct answer.
    3. Continue dialysis and retest after the shift
    4. Increase dialysate sodium concentration

    Explanation

    Chlorine or chloramine breakthrough can cause hemolysis and other serious patient harm, so dialysis must stop and the water system must be corrected before treatment resumes. Retesting must show acceptable results before the water is used.

  153. Question 153Infection Control and Patient Safety

    A patient admitted to the dialysis unit is colonized with vancomycin-resistant Enterococcus (VRE). Which precaution is appropriate?

    1. Droplet precautions and a surgical mask
    2. Contact precautions and dedicated equipment Correct answer.
    3. Airborne precautions and an N95 respirator
    4. No precautions if there is no diarrhea

    Explanation

    VRE is spread mainly by contact, so gown and gloves are used and dedicated equipment is preferred to limit transmission. Standard precautions are also maintained.

  154. Question 154Infection Control and Patient Safety

    A dialysis patient has suspected influenza with cough and fever. Which precaution should the technician use?

    1. Standard precautions only
    2. Droplet precautions Correct answer.
    3. Airborne precautions
    4. Contact precautions

    Explanation

    Influenza is spread primarily by respiratory droplets, so droplet precautions are added to standard precautions. A surgical mask and eye protection are used when close contact is likely.

  155. Question 155Infection Control and Patient Safety

    A technician has a weeping, draining lesion on the hand. What should the technician do?

    1. Refrain from direct patient care until healed Correct answer.
    2. Wear sterile gloves over the lesion
    3. Cover with one adhesive bandage and cannulate
    4. Apply alcohol gel to the lesion

    Explanation

    Healthcare personnel with exudative lesions or weeping dermatitis should not provide direct patient care because the lesion can be a source of transmission. The condition should be evaluated and resolved before resuming patient contact.

  156. Question 156Infection Control and Patient Safety

    A technician sustains a needlestick from a patient with HIV. Post-exposure prophylaxis should be started how soon?

    1. As soon as possible, ideally within hours Correct answer.
    2. After the next dialysis shift
    3. Only after HIV test results are positive
    4. Within 2 weeks of exposure

    Explanation

    HIV post-exposure prophylaxis should be started as soon as possible after exposure, ideally within hours, because earlier treatment is more effective. The exposure should also be reported and evaluated promptly.

  157. Question 157Infection Control and Patient Safety

    A dialysis patient has localized herpes zoster (shingles) with lesions that can be covered. Which precaution is appropriate?

    1. Droplet precautions and a surgical mask
    2. Standard precautions without extra precautions
    3. Contact precautions with lesions covered Correct answer.
    4. Airborne precautions and an N95 respirator

    Explanation

    Localized herpes zoster is managed with contact precautions plus standard precautions, and the lesions should be covered. Airborne precautions are required for disseminated zoster.

  158. Question 158Infection Control and Patient Safety

    Before performing a catheter dressing change, which hand hygiene action is required?

    1. Hand hygiene before the task Correct answer.
    2. Use hand rub after opening the tray
    3. Wear gloves without hand hygiene
    4. Wash hands only if visibly soiled

    Explanation

    Hand hygiene must be performed immediately before any aseptic task, including a catheter dressing change. Gloves are worn after hand hygiene but do not replace it.

  159. Question 159Infection Control and Patient Safety

    A technician is preparing supplies for the next patient. Which practice prevents contamination?

    1. Place clean needles on the machine top
    2. Store clean supplies next to used tubing
    3. Reuse gloves from the previous patient
    4. Keep clean supplies in a clean area Correct answer.

    Explanation

    Clean supplies should be kept in a designated clean area separated from contaminated items and used equipment. Mixing clean and dirty items promotes cross-contamination.

  160. Question 160Infection Control and Patient Safety

    During a hemodialysis treatment through a central venous catheter, a patient develops sudden fever, chills, and hypotension. What is the most appropriate initial action?

    1. Flush catheter with heparin and continue
    2. Give acetaminophen and continue treatment
    3. Stop treatment and notify the care team Correct answer.
    4. Slow blood flow and continue treatment

    Explanation

    Sudden fever, chills, and hypotension during catheter use suggest a catheter-related bloodstream infection or another serious reaction, so treatment should stop and the care team should be notified for emergency assessment. Continuing dialysis delays needed evaluation and treatment.

  161. Question 161Professional Practice, Education, and Role Responsibilities

    The primary purpose of certification for a clinical hemodialysis technician is to:

    1. guarantee that the technician will be promoted to a supervisory role
    2. replace the employer's obligation to provide on-the-job training
    3. verify that the technician meets a minimum standard of competence Correct answer.
    4. grant the technician authority to practice independently of a registered nurse

    Explanation

    Certification confirms that a technician has met a nationally recognized minimum standard of knowledge and skill, as demonstrated by passing an examination and meeting eligibility requirements. It does not confer independent practice authority, replace employer-provided orientation, or promise advancement. Facilities rely on certification as one element of competency assurance alongside ongoing validation.

  162. Question 162Professional Practice, Education, and Role Responsibilities

    Which activity falls within the scope of practice of a certified clinical hemodialysis technician?

    1. Adjusting the prescribed ultrafiltration goal when a patient's blood pressure drops
    2. Administering a prescribed intravenous push antihypertensive medication
    3. Changing the dialysate potassium concentration in response to a laboratory result
    4. Cannulating a mature arteriovenous fistula after training and competency validation Correct answer.

    Explanation

    Technician scope includes direct dialysis care tasks for which the individual has been trained and competency-validated, such as cannulation of a mature access. Modifying the treatment prescription, including ultrafiltration goals and dialysate composition, is a nursing or medical function. Intravenous push medications are also outside technician scope in most jurisdictions.

  163. Question 163Professional Practice, Education, and Role Responsibilities

    A technician overhears coworkers discussing a patient's name and diagnosis loudly in a public elevator. This conversation:

    1. breaches policy only if the patient files a written complaint
    2. breaches patient confidentiality and should be reported Correct answer.
    3. is acceptable if the coworkers are off duty at the time
    4. is acceptable if no visitors are present in the elevator

    Explanation

    Protected health information may be shared only with those who need it to provide care, and never in public areas where it can be overheard. Off-duty status and the absence of visitors do not remove the obligation to protect privacy. The technician should report the breach through the facility's privacy process.

  164. Question 164Professional Practice, Education, and Role Responsibilities

    A technician suspects a coworker is working while impaired by alcohol. The technician should:

    1. say nothing unless directly asked by a supervisor
    2. confront the coworker in front of patients to gather details
    3. wait to see whether the coworker makes a clinical error
    4. report the concern immediately to the supervisor in charge Correct answer.

    Explanation

    Impaired practice creates an immediate risk to patient safety and must be reported promptly to a supervisor so the coworker can be removed from patient care. Technicians are not expected to investigate or confront. Delay based on waiting for an error to occur is unacceptable.

  165. Question 165Professional Practice, Education, and Role Responsibilities

    A patient offers a technician an expensive watch as thanks for care. The best response is to:

    1. accept it only if the patient insists a second time
    2. accept it and share it with the dialysis team
    3. accept it but keep the gift a secret from other staff
    4. decline politely and explain the facility's gift policy Correct answer.

    Explanation

    Accepting valuable gifts can create a real or perceived conflict of interest and may violate facility policy or state rules. The professional response is a courteous refusal with an explanation. Secrecy or sharing the item does not remove the ethical problem.

  166. Question 166Professional Practice, Education, and Role Responsibilities

    An advance directive is a document that:

    1. certifies that a patient has completed dialysis education
    2. authorizes the technician to consent to treatment for the patient
    3. records a patient's wishes for care if the patient cannot decide Correct answer.
    4. lists the medications a patient must receive during dialysis

    Explanation

    An advance directive allows a person to state preferences for future medical care, such as a living will or a health care proxy, and takes effect when the person loses decision-making capacity. It is not a medication list, an education record, or a delegation of consent to technicians. Staff should know whether one exists and follow facility policy for honoring it.

  167. Question 167Professional Practice, Education, and Role Responsibilities

    A competent adult patient tells the technician, "I want to stop treatment early today." The technician should:

    1. respect the decision and inform the registered nurse Correct answer.
    2. persuade the patient to complete the full prescribed time
    3. ask another patient to convince the patient to stay
    4. end the treatment without notifying anyone

    Explanation

    A patient with decision-making capacity may refuse or withdraw from treatment, and the technician must honor that choice while ensuring the nurse is informed so the discontinuation is managed safely and documented. Coercion or involving other patients is inappropriate. The nurse and physician can then discuss risks with the patient.

  168. Question 168Professional Practice, Education, and Role Responsibilities

    Continuing education is required for certified technicians mainly because it:

    1. keeps knowledge and skills current as practice changes Correct answer.
    2. guarantees a higher hourly wage in most states
    3. is a way for facilities to advertise their staff
    4. replaces the need for annual competency validation

    Explanation

    Continuing education maintains and updates clinical knowledge so practice reflects current evidence, technology, and standards. It supplements but does not replace employer competency validation. It is not a marketing tool and does not by itself determine pay.

  169. Question 169Professional Practice, Education, and Role Responsibilities

    Under CMS Conditions for Coverage, a patient care technician hired without prior certification must become certified within:

    1. 30 days of hire
    2. 6 months of hire
    3. 18 months of hire Correct answer.
    4. 3 years of hire

    Explanation

    The Conditions for Coverage require that patient care technicians who are not certified at hire obtain certification by a nationally recognized certifying organization within 18 months of their hire date. Technicians must also meet applicable state requirements. Facilities must track deadlines so uncertified staff do not exceed the allowed period.

  170. Question 170Professional Practice, Education, and Role Responsibilities

    A technician is asked by a coworker to perform a task the technician has never been trained to do. The best action is to:

    1. perform the task slowly while following the written procedure manual step by step
    2. refuse and then leave the unit without telling anyone
    3. decline until trained and validated, and notify the supervisor Correct answer.
    4. ask an unlicensed coworker to demonstrate the task once

    Explanation

    Technicians may perform only tasks for which they have documented training and competency validation. Reading a manual or watching a single demonstration does not establish competence. The technician should decline, inform the supervisor, and arrange proper training.

  171. Question 171Professional Practice, Education, and Role Responsibilities

    A technician believes a nurse's instruction is unsafe for the patient. The technician should first:

    1. follow the instruction as given and document the concern at the end of the shift
    2. ask the other technicians on the floor what they would do in the same situation
    3. refuse to provide any care for that patient until the next shift begins
    4. raise the concern with the nurse and escalate if unresolved Correct answer.

    Explanation

    The chain of command begins with direct, respectful communication with the person who gave the instruction, followed by escalation to the charge nurse or manager if the concern is not resolved. Delaying action or abandoning the patient is unsafe. Coworkers can offer support but are not the decision-makers.

  172. Question 172Professional Practice, Education, and Role Responsibilities

    Which approach best confirms that a patient understands fluid restrictions?

    1. reviewing the limit once in front of the family
    2. asking the patient to explain the limit in their own words Correct answer.
    3. giving the patient a printed handout at discharge
    4. asking, "Do you understand the fluid limit?"

    Explanation

    Teach-back asks the patient to restate information in their own words, which reveals actual understanding better than a yes-or-no question. Handouts and family presence support learning but do not confirm comprehension. This technique is a core health-literacy strategy.

  173. Question 173Professional Practice, Education, and Role Responsibilities

    A technician wants to post a photo taken in the dialysis unit. The technician should:

    1. post it only in a private group for dialysis staff
    2. post it if no patient faces are visible in the photo
    3. avoid posting any image that could identify a patient Correct answer.
    4. post it after deleting the location tag from the image

    Explanation

    Images from care areas can reveal protected health information through faces, wrists with access sites, charts, or room identifiers, so identifiable images must never be posted. Removing a location tag or limiting the audience does not make the post acceptable. Facility social media policy governs all such postings.

  174. Question 174Professional Practice, Education, and Role Responsibilities

    A technician sustains a needlestick while cannulating a patient. After washing the site and seeking care, the technician must:

    1. report it at the end of the month during staff meeting
    2. report the exposure promptly and complete an incident report Correct answer.
    3. wait to see whether any symptoms develop before reporting
    4. document the event only in the patient's medical record

    Explanation

    Exposure incidents require prompt reporting so post-exposure evaluation, prophylaxis, and source testing can occur within recommended timeframes. An incident report documents the event through the facility's safety system and is separate from the patient's record. Delay compromises both the technician's health and the facility's ability to correct hazards.

  175. Question 175Professional Practice, Education, and Role Responsibilities

    A technician realizes after leaving the unit that a treatment note was not charted. The technician should:

    1. add a late entry noting the actual date and time Correct answer.
    2. ask a coworker to write the note from memory
    3. leave the note blank because the treatment is over
    4. write the note as if it had been charted during treatment

    Explanation

    Late entries are acceptable when they are clearly labeled as late and show the actual date and time of documentation, along with the time of the event if known. Backdating or having another person chart from memory falsifies the record. Accurate, honest documentation protects the patient and the technician.

  176. Question 176Professional Practice, Education, and Role Responsibilities

    A patient who observes religious fasting asks to change treatment times during a holy month. The technician should:

    1. ask the patient to skip treatments until the fast ends
    2. notify the care team so the schedule can be reviewed Correct answer.
    3. tell the patient fasting is not allowed on dialysis
    4. schedule the change without informing the care team

    Explanation

    Religious and cultural practices should be respected and accommodated when clinically possible, but treatment timing and prescription changes require team review. The technician's role is to communicate the request, not to make unilateral scheduling or clinical decisions. Skipping treatments is dangerous and is never advised by a technician.

  177. Question 177Professional Practice, Education, and Role Responsibilities

    During treatment a patient reports new chest pain. The technician's first action is to:

    1. document the complaint in the record for the nurse to read later
    2. notify the registered nurse and remain with the patient Correct answer.
    3. finish the current rinseback before reporting
    4. lower the blood flow and continue monitoring

    Explanation

    New chest pain during dialysis is a potentially life-threatening change that requires immediate nursing assessment. The technician alerts the nurse at once and stays with the patient for safety. Documenting first or adjusting the machine without direction delays needed care.

  178. Question 178Professional Practice, Education, and Role Responsibilities

    A technician has an ongoing disagreement with a coworker about unit workflow. The best first step is to:

    1. ask the supervisor to move the coworker to another shift
    2. ignore the issue and hope it resolves on its own
    3. discuss the concern privately with the coworker Correct answer.
    4. complain about the coworker to other staff members

    Explanation

    Professional conflict resolution starts with a direct, private conversation focused on the problem rather than the person. Involving other staff or immediately seeking schedule changes escalates the situation unnecessarily. If the discussion does not resolve the issue, the technician escalates through the chain of command.

  179. Question 179Professional Practice, Education, and Role Responsibilities

    Regarding informed consent for dialysis, the technician's role is to:

    1. decide whether the patient is capable of giving consent
    2. confirm that consent was obtained and documented per policy Correct answer.
    3. explain the risks and benefits of the procedure to the patient
    4. obtain consent in place of the physician when the unit is busy

    Explanation

    Explaining risks, benefits, and alternatives and determining decision-making capacity are responsibilities of the treating provider. Technicians support the process by verifying that consent is present and documented and by reporting questions to the nurse. They do not obtain substitute consent.

  180. Question 180Professional Practice, Education, and Role Responsibilities

    Which activity best reflects a technician's participation in quality improvement?

    1. auditing staff breaks to reduce overtime costs
    2. rewriting the unit's policies without approval
    3. collecting data on missed cannulation attempts for review Correct answer.
    4. deciding alone to change a catheter dressing protocol

    Explanation

    Technicians contribute to quality improvement by gathering accurate data and participating in unit-based review of outcomes such as access complications. Policy and protocol changes require formal team and leadership approval. Data collection is a defined, appropriate technician role.

  181. Question 181Professional Practice, Education, and Role Responsibilities

    A physician gives a technician a verbal order to lower the dialysate potassium for a patient with a high potassium level. The technician should:

    1. follow the facility protocol for verbal orders and route the order to the registered nurse Correct answer.
    2. make the change because the physician gave the order directly
    3. refuse to speak with the physician and end the conversation
    4. make the change and inform the nurse after treatment begins

    Explanation

    Dialysate composition is part of the treatment prescription and cannot be changed by a technician, even on a physician's direct request. Verbal orders must be handled through the facility's order process, typically received and verified by a registered nurse. This protects the patient and keeps accountability clear.

  182. Question 182Professional Practice, Education, and Role Responsibilities

    A patient asks the technician not to tell anyone that several treatments were missed. The technician should:

    1. agree, because the patient has a right to privacy
    2. document nothing and let the next shift discover it
    3. tell only the other technicians on the shift
    4. explain that the care team must know and share the concern appropriately Correct answer.

    Explanation

    Confidentiality does not permit withholding information that is essential to safe care; missed treatments carry serious clinical risk and must reach the care team. The technician acknowledges the patient's concern and explains that information is shared only with those involved in care. Sharing only with other technicians or remaining silent is inappropriate.

  183. Question 183Professional Practice, Education, and Role Responsibilities

    A technician realizes that certification expired last month. The correct action is to:

    1. continue working until the renewal application is approved
    2. wait for the facility to notice the lapse at the next survey
    3. ask a coworker to sign the technician's documentation
    4. stop performing technician duties and notify the supervisor immediately Correct answer.

    Explanation

    Certification is a condition of practice; once it lapses, the technician must not perform technician duties until it is reinstated or the facility confirms that state and federal requirements permit continued work. Self-reporting allows the employer to protect patients and address the situation. Continuing to work or hiding the lapse can result in disciplinary action and survey deficiency.

  184. Question 184Professional Practice, Education, and Role Responsibilities

    A patient's adult child asks the technician on a date. The technician should:

    1. decline and explain that a personal relationship could compromise care Correct answer.
    2. accept but ask the child not to tell the patient
    3. accept only after the patient is discharged from the unit
    4. accept, because the child is not the patient

    Explanation

    Personal relationships with patients' family members can create conflicts of interest, perceptions of favoritism, and blurred boundaries that affect the care of the patient. Professionals avoid such relationships while the care relationship exists. A respectful refusal preserves trust and objectivity.

  185. Question 185Professional Practice, Education, and Role Responsibilities

    A patient on hemodialysis asks whether a kidney transplant would be possible. The technician should:

    1. provide general information and refer the patient to the transplant team Correct answer.
    2. advise the patient to stop dialysis before pursuing transplant
    3. tell the patient that transplant is not an option on dialysis
    4. review the patient's chart and estimate the patient's eligibility

    Explanation

    Technicians may offer general education and connect patients with the appropriate resources, such as the transplant team or social worker, who can evaluate eligibility. Determining candidacy is a specialized clinical function. Advising a patient to stop dialysis would be dangerous and outside scope.

  186. Question 186Professional Practice, Education, and Role Responsibilities

    Which task is within the usual scope of practice of a certified clinical hemodialysis technician?

    1. Prescribing a phosphate binder for a patient with high phosphorus
    2. Changing the dialysate sodium concentration ordered for a patient
    3. Adjusting a patient's estimated dry weight
    4. Cannulating an arteriovenous fistula using the unit's procedure Correct answer.

    Explanation

    Cannulation is a core hemodialysis skill that certified technicians perform under facility protocol and state rules. Dialysate composition, dry weight, and medication orders are prescriber responsibilities.

  187. Question 187Professional Practice, Education, and Role Responsibilities

    Which organization awards the Certified Clinical Hemodialysis Technician (CCHT) credential?

    1. American Nephrology Nurses Association (ANNA), a professional nursing society
    2. National Kidney Foundation (NKF), a patient advocacy group
    3. Nephrology Nursing Certification Commission (NNCC) Correct answer.
    4. Centers for Medicare & Medicaid Services (CMS), a federal agency

    Explanation

    The Nephrology Nursing Certification Commission administers the CCHT examination and maintains the credential. The other organizations have different roles in nephrology care and policy.

  188. Question 188Professional Practice, Education, and Role Responsibilities

    A technician needs to discuss a patient's treatment schedule with another staff member. Where is it appropriate to hold this conversation?

    1. In the hospital cafeteria during a break
    2. In the unit's public waiting area
    3. In a private area away from other patients and visitors Correct answer.
    4. At the front desk while the patient's family listens

    Explanation

    Patient information may only be discussed where others cannot overhear it. Waiting areas, cafeterias, and open desks are public spaces where protected health information can be disclosed incidentally.

  189. Question 189Professional Practice, Education, and Role Responsibilities

    In the dialysis care team, which responsibility belongs to the registered nurse rather than the technician?

    1. Cannulating the vascular access
    2. Obtaining pre-treatment vital signs
    3. Performing the initial comprehensive patient assessment Correct answer.
    4. Monitoring the extracorporeal circuit during treatment

    Explanation

    Initial assessment, care planning, and evaluation of outcomes are nursing responsibilities, while technicians collect data and report findings. Vital signs, cannulation, and circuit monitoring fall within technician practice with nurse oversight.

  190. Question 190Professional Practice, Education, and Role Responsibilities

    A technician notices a patient's adult son repeatedly pressuring the patient for money, and the patient appears frightened and has unexplained bruising. What should the technician do?

    1. Confront the son about his behavior in the waiting room
    2. Report the concern to the charge nurse and follow facility abuse policy Correct answer.
    3. Document the concern for discussion at the next care plan meeting
    4. Wait until the patient brings up the problem before taking action

    Explanation

    Suspected abuse, neglect, or exploitation must be reported promptly through facility channels and, in most states, to the designated state agency. Investigating or confronting the suspected abuser is not the technician's role.

  191. Question 191Professional Practice, Education, and Role Responsibilities

    A patient who speaks little English arrives for treatment with an adult neighbor who offers to interpret. The technician should:

    1. Ask the patient's young grandchild to interpret the key points
    2. Use a qualified medical interpreter for the discussion Correct answer.
    3. Use gestures and simple pictures instead of an interpreter
    4. Accept the offer because the neighbor knows the patient well

    Explanation

    Patients with limited English proficiency are entitled to a qualified medical interpreter at no cost. Untrained interpreters, and especially children, risk miscommunication and privacy breaches.

  192. Question 192Professional Practice, Education, and Role Responsibilities

    While setting up machines at 5 a.m., a technician notices a coworker's breath smells of alcohol and the coworker is unsteady on her feet. What is the technician's best action?

    1. Wait until the end of the shift and discuss it privately
    2. Quietly take over the coworker's patient assignments for the shift
    3. Say nothing unless the coworker makes an error
    4. Report the observation to the supervisor immediately Correct answer.

    Explanation

    A coworker who may be impaired is an immediate patient safety risk and must be reported to a supervisor right away. Covering for the coworker conceals the problem and leaves patients exposed.

  193. Question 193Professional Practice, Education, and Role Responsibilities

    A technician sees a nurse administer the wrong dose of a medication to a patient. The technician should first:

    1. Write a note in the chart describing the nurse's error
    2. Notify the nurse and the charge nurse right away Correct answer.
    3. Complete an incident report and say nothing to anyone else
    4. Wait to see whether the patient has any reaction

    Explanation

    Patient safety comes first, so the nurse who gave the drug and the charge nurse must be told immediately so the patient can be assessed. Incident reporting is completed afterward and never replaces prompt notification.

  194. Question 194Professional Practice, Education, and Role Responsibilities

    Which action best reflects the technician's role on the interdisciplinary care team?

    1. Counseling the patient about Medicare coverage options
    2. Revising the patient's dry weight between rounds
    3. Deciding whether the patient needs a transplant referral
    4. Reporting observed changes in appetite and energy to the team Correct answer.

    Explanation

    Technicians contribute observational data about the patient that the team uses in care planning. Prescription changes, coverage counseling, and referral decisions belong to other team members.

  195. Question 195Professional Practice, Education, and Role Responsibilities

    Which approach best supports learning for a patient with limited health literacy?

    1. Speaking quickly so the information is given only once
    2. Explaining every detail of how the dialysis machine works
    3. Providing a dense handout written at a college reading level
    4. Focusing on two or three key points in plain language Correct answer.

    Explanation

    Plain language and a small number of key messages match the needs of patients with limited health literacy. Dense handouts, technical detail, and rapid one-time teaching reduce comprehension.

  196. Question 196Professional Practice, Education, and Role Responsibilities

    What is a sound reason for a dialysis technician to join a national nephrology professional organization?

    1. It guarantees a higher hourly wage
    2. It provides continuing education and practice resources Correct answer.
    3. It transfers legal responsibility for errors to the association
    4. It replaces the need for state licensure

    Explanation

    Professional organizations offer education, standards, networking, and advocacy that support career growth. Membership does not set wages, substitute for licensure, or shift legal accountability.

  197. Question 197Professional Practice, Education, and Role Responsibilities

    A patient tells the technician that a new medication makes him dizzy but that he does not want to bother the nephrologist. What is the technician's best response?

    1. Agree to keep the comment confidential as requested
    2. Advise the patient to stop taking the medication
    3. Tell the patient dizziness is expected and needs no follow-up
    4. Encourage the patient to report it and tell the nurse Correct answer.

    Explanation

    The technician acts as a patient advocate by making sure concerns reach the care team, since a new symptom may be medication-related. Advising a patient to stop a drug or promising secrecy is outside technician scope.

  198. Question 198Professional Practice, Education, and Role Responsibilities

    Which elements must be proven for a malpractice claim against a health care worker to succeed?

    1. Duty, breach of duty, causation, and damages Correct answer.
    2. Negligence, apology, and settlement
    3. Consent, documentation, and certification
    4. Intent, malice, and financial loss

    Explanation

    Negligence requires four elements: a duty owed to the patient, a breach of that duty, harm caused by the breach, and actual damages. All four must be established.

  199. Question 199Professional Practice, Education, and Role Responsibilities

    A technician is unsure whether a particular task is legally permitted for a dialysis technician. Which source most directly defines the technician's legal scope of practice?

    1. The certification examination content outline
    2. The unit's monthly staff meeting minutes
    3. The state's nurse practice act and related regulations Correct answer.
    4. The manufacturer's instructions for the dialysis machine

    Explanation

    State nurse practice acts and related regulations define which tasks unlicensed personnel such as dialysis technicians may perform. Facility policy and exam outlines must be consistent with that law but cannot expand it.

  200. Question 200Professional Practice, Education, and Role Responsibilities

    A technician receives a telephone call from an attorney asking for information about a patient's recent treatments. The technician should:

    1. Provide the dates of treatment as a courtesy
    2. Confirm the caller is the patient's lawyer, then answer
    3. Refer the caller to the facility's medical records or legal department Correct answer.
    4. Read the treatment flowsheets aloud to the caller

    Explanation

    Requests for patient information from attorneys or other outsiders must go through the facility's release-of-information or legal process. Technicians should not confirm or disclose any patient information to unknown callers.

CCHT flashcards

32 cards. Read the term and the definition here. The deck at the top of this page is optional.

Normal adult heart rate
A resting heart rate for adults is typically 60 to 100 beats per minute; report rates outside this range or a significant change from the patient's baseline.
Intradialytic hypotension signs
Symptoms include dizziness, nausea, sweating, cramps, yawning, and a systolic blood pressure drop of more than 20 mm Hg or below 90 mm Hg.
Dry weight
The target weight after dialysis that reflects the patient's estimated fluid-removed state; it is used to calculate ultrafiltration goal and is reassessed for symptoms and blood pressure.
Thrill and bruit
A palpable vibration (thrill) and audible whoosh (bruit) over an arteriovenous access indicate blood flow; their absence requires immediate notification and access evaluation.
Access arm precautions
The arm with a hemodialysis access should not be used for blood pressure measurement, venipuncture, or intravenous lines because compression or needle injury can damage the access.
Muscle cramps during dialysis
Common causes include rapid ultrafiltration, low dialysate sodium, and hypovolemia; treatment may include reducing ultrafiltration, saline, or hypertonic saline per protocol.
Post-dialysis assessment
After treatment, check weight, blood pressure, access bleeding, dizziness, cramping, and mental status; compare findings with pre-dialysis values and report abnormal changes.
Air detector function
The air detector alarms and stops the blood pump when air is detected in the extracorporeal circuit; alarms must never be bypassed or ignored.
Venous pressure alarm low
A low venous pressure alarm may indicate a disconnected venous line, needle dislodgement, or reduced blood flow; stop treatment and assess the circuit and access.
Conductivity check
Bicarbonate dialysate conductivity is typically about 13 to 15 mS/cm; verify within facility limits before connecting the patient and investigate alarms.
Transmembrane pressure
TMP is the pressure difference across the dialyzer membrane; it influences ultrafiltration and is monitored to avoid excessive pressure or membrane damage.
Ultrafiltration rate calculation
Divide the ultrafiltration goal in milliliters by the treatment time in hours to get the hourly ultrafiltration rate; compare with the prescribed and safe range.
Blood leak detector
The blood leak detector monitors dialysate for blood; it alarms and should stop or divert flow to prevent contaminated dialysate from reaching the patient.
Machine disinfection residual
After chemical disinfection, test for residual disinfectant before use according to policy; residual chemical in the dialysate pathway can cause patient injury.
Chloramine testing
Carbon tanks remove chlorine and chloramine from feed water; test treated water before each shift and after carbon backwash because chloramine can cause hemolysis.
Reverse osmosis rejection
RO membranes remove dissolved ions and contaminants; percent rejection is calculated from feed and permeate conductivity and monitored to confirm membrane performance.
Water hardness testing
A water softener removes calcium and magnesium; test hardness daily or per policy because hardness breakthrough can damage RO membranes and affect dialysate.
Dialysate bicarbonate mixing
Bicarbonate dialysate must be mixed according to manufacturer instructions, checked for conductivity and pH, and used within the facility's time limit.
Dialysate temperature alarm
Dialysate is typically warmed to about 37°C; high temperature can cause hemolysis and low temperature can cause chills, so alarms must be investigated.
Deionization tank exhaustion
Deionization tanks exchange ions but can release previously captured ions when exhausted; monitor resistivity and replace or regenerate tanks per policy.
Hand hygiene indications
Perform hand hygiene before and after patient contact, after glove removal, and after contact with blood, body fluids, or contaminated equipment.
Access site antisepsis
Clean the dialysis access site or catheter hub with an approved antiseptic and allow it to dry completely before cannulation or connection to reduce bloodstream infection.
Hepatitis B isolation
Patients positive for hepatitis B surface antigen generally require a separate room and dedicated machine in hemodialysis units; follow facility policy and vaccination recommendations.
Needlestick response
Wash the needlestick site with soap and water, report immediately, and follow post-exposure evaluation and prophylaxis protocols; do not squeeze or scrub the wound.
Blood spill cleanup
Use gloves and absorbent material, remove visible blood, then disinfect with an approved agent such as 1:10 bleach at the required contact time.
Standard precautions
Standard precautions require gloves for contact with blood or body fluids and masks, eye protection, or gowns when splashes are likely.
CCHT scope of practice
The certified clinical hemodialysis technician performs dialysis tasks under registered nurse or physician supervision and does not independently diagnose, prescribe, or change prescriptions.
Teach-back method
Teach-back asks patients to explain information in their own words; it confirms understanding of access care, diet, fluids, and medications before discharge or treatment end.
Dialysis documentation
Document pre- and post-dialysis weights, vital signs, medications, access assessment, alarms, interventions, and patient response accurately and in a timely manner.
HIPAA privacy rule
Protected health information may be shared only with authorized persons who need it for care, payment, or operations; avoid discussing patient details in public areas.
Adverse event reporting
Errors, injuries, and near misses are reported through the facility's incident reporting system promptly so risks can be evaluated and patient safety improved.
Continuing certification requirements
CCHT certification requires renewal through continuing education and adherence to certification body requirements; technicians also maintain current CPR/BLS per employer policy.

CCHT study guide

Patient Care and Assessment

Pre-treatment assessment

Every treatment begins with a focused assessment you perform and document before the blood pump starts. Establish identity, obtain the pre-weight on the same scale each time, and record pre-dialysis vital signs (blood pressure with the patient seated, ideally in the same arm), temperature, pulse, and respirations. Assess the vascular access: palpate for a thrill, auscultate for a bruit, look for redness, swelling, drainage, or bruising, and ask about pain. Review the plan-target weight, ultrafiltration goal, dialysate prescription, medications due, and any recent symptoms such as dizziness, cramping, or missed treatments.

During and after treatment

Monitor vital signs at set intervals and whenever symptoms appear. Intradialytic hypotension is the most common complication-suspect it when a patient yawns, feels nauseated, becomes diaphoretic, or reports dizziness. Cramping often reflects excessive ultrafiltration or a high sodium gradient. Disequilibrium syndrome (headache, confusion, seizures) is more likely with a first treatment or very high urea clearance. Post-treatment: recheck weight and vital signs, hold the access site until hemostasis, inspect the access, and give clear instructions about when to call.

Traps and a rule of thumb

Questions like to blur assessment (observation, palpation, auscultation) with intervention, and to ask what the technician reports versus what the RN decides. Remember that the technician collects and reports data; the RN interprets and revises the plan of care. Rule of thumb: a symptomatic fall in systolic pressure of about 20 mmHg (or a systolic under 90) during treatment is a hypotension event-stop or slow ultrafiltration, reposition the patient, and follow the protocol for fluid replacement.

Dialysis Procedures and Equipment

The extracorporeal circuit

Blood leaves the access through the arterial needle, reaches the arterial pressure monitor (which reads the negative pressure created by the blood pump), passes through the blood pump, enters the dialyzer, then moves past the venous pressure monitor, through the air detector and clamp, and returns via the venous needle. Dialysate flows countercurrent to blood-opposite direction-to maximize the concentration gradient. Ultrafiltration is the volume of plasma water removed as prescribed; on volumetric machines the UF goal, not transmembrane pressure alone, determines removal, although TMP is the pressure that drives it.

Alarms and checks

Separate alarms by location. A pre-pump arterial alarm often signals an access problem (infiltration, stenosis, needle against the vessel wall, kinked line). A high venous pressure alarm suggests a clot, a kink, or a poorly positioned venous needle. The air detector protects against air embolism and will clamp the line and stop the pump; never bypass it. Blood leak detectors on the dialysate side guard against membrane rupture. A conductivity alarm means the proportioning system is producing dialysate outside the safe range-do not reconnect the patient until it is corrected and verified.

Traps and a rule of thumb

Trap questions mix up TMP with the UF goal, or ask which alarm a kinked arterial line triggers. Another common trap is "troubleshooting" by silencing an alarm without assessing the patient. Rule of thumb: for any alarm, look at the patient first, then the circuit, then the machine-and never return blood after an air detector alarm until the cause has been found and corrected.

Water Treatment and Dialysate Preparation

The treatment train

Municipal water passes through a sediment filter, a water softener (which exchanges calcium and magnesium for sodium and protects the RO membrane from scale), carbon tanks (which remove chlorine, chloramine, and organic material), reverse osmosis (which removes most dissolved ions, bacteria, and endotoxin), and usually an ultraviolet lamp or ultrafilter before reaching the proportioning system. Two carbon tanks in series provide backup; test total chlorine after each tank, at minimum before each shift and after any carbon change.

Dialysate

Dialysate is made by proportioning concentrate with treated water-typically an acid concentrate containing sodium, potassium, calcium, magnesium, chloride, and dextrose, plus a bicarbonate concentrate. Conductivity reflects total ionic concentration and must fall within the prescribed range before the patient is connected. Bicarbonate concentrate supports bacterial growth and can lose potency, so it is used within the manufacturer's time limit.

Traps and a rule of thumb

Questions confuse the roles of the softener and the carbon tanks, or ask what happens if chloramine breaks through-hemolysis, worsening anemia, methemoglobinemia, and sometimes a chlorine taste. Another trap: the technician may test and record water quality but cannot redesign, repair, or override the treatment system-report out-of-range results and stop using the water per policy.

Rule of thumb: total chlorine after each carbon tank should be essentially undetectable (commonly less than 0.1 mg/L); if it is not, hold treatments and notify the person responsible for the water system.

Infection Control and Patient Safety

Standard precautions

Treat every patient's blood and body fluids as infectious. Hand hygiene is the single most effective measure: perform it before and after every patient contact and after glove removal-gloves do not replace hand washing. Wear gloves for access care and any potential blood exposure, plus gown, mask, and eye protection when splash is likely. Use new needles and new supplies for each treatment, never recap needles by hand, and dispose of sharps immediately at the point of use. Clean and disinfect the station, chair, and machine surfaces between patients.

Patient safety and special situations

Verify identity with two identifiers before treatment and before any medication. Keep side rails up and brakes locked, keep floors dry, and answer call lights promptly. Report any needlestick or splash immediately so post-exposure evaluation can begin. Hepatitis B is the most transmissible bloodborne virus in the dialysis unit and the only one with a vaccine; patients who are HBsAg positive are typically dialyzed in a separate area with dedicated equipment, whereas patients with hepatitis C or HIV are managed under standard precautions. Follow the immunization schedule and monitor response.

Traps and a rule of thumb

Trap items ask which virus requires isolation (hepatitis B surface antigen positive), whether gloves alone suffice (they do not), or what to do first after a needlestick (wash the site and report immediately). Rule of thumb: if you would not want it on your skin, it goes in the biohazard container-and if it splashed, you report it during the same shift.

Professional Practice, Education, and Role Responsibilities

Your scope and responsibilities

The certified clinical hemodialysis technician performs dialysis under the direction of a registered nurse or physician: preparing the machine and supplies, cannulating the access, initiating and monitoring treatment, documenting observations, and reinforcing the teaching plan. The RN performs the initial and ongoing patient assessment, develops and revises the plan of care, and decides clinical interventions; the technician reports changes rather than making independent clinical decisions. Know your state's rules, since scope varies. Certification requires passing an approved examination and maintaining it through continuing education and recertification-keep your records current.

Education and communication

Patient education is continuous. Teach in short, concrete terms and check understanding by asking the patient to explain it back. Reinforce fluid limits, sodium and potassium restriction, phosphorus binders taken with meals, access care (check the thrill daily; no blood pressures or draws in the access arm), and the reason for each medication. Protect privacy: discuss care only with those involved and follow HIPAA rules for any disclosure. Document objectively and promptly-what you saw, what you did, and whom you told.

Traps and a rule of thumb

Test items probe boundaries: who develops the plan of care (the RN), who may act on a new prescription (the prescriber's order as verified by the RN, not the technician's own judgment), and what belongs in the record (facts, not opinions). Another trap is confusing patient education with obtaining informed consent.

Rule of thumb: if it is a clinical judgment, escalate it; if it is a fact you observed, document it and report it.

CCHT cheat sheet

Quick reference

Patient Care and Assessment

  • Pre-dialysis assessment includes weight, blood pressure, pulse, respirations, temperature, access thrill/bruit, bleeding, edema, lung sounds, and symptom review.

  • Estimated dry weight is the target post-dialysis weight; ultrafiltration goal is commonly pre-dialysis weight minus target weight, adjusted for saline/prime per facility policy.

  • Intradialytic hypotension: systolic below 90 mm Hg or a drop greater than 20 mm Hg with symptoms; reduce or stop ultrafiltration, reposition, and give saline per order.

  • Muscle cramps often relate to rapid ultrafiltration or low dialysate sodium; interventions include slowing ultrafiltration and saline or hypertonic saline per protocol.

  • An arteriovenous access should have a palpable thrill and audible bruit; absence is an urgent finding requiring immediate notification.

  • The access arm is not used for blood pressure measurement, venipuncture, or intravenous access because compression or needle injury can damage the access.

  • Signs of access infection include redness, warmth, swelling, drainage, and fever; these require prompt reporting and evaluation.

  • Post-dialysis assessment includes weight, blood pressure, access hemostasis, dizziness, cramping, and mental status compared with baseline.

Quick reference

Dialysis Procedures and Equipment

  • Before patient connection, verify dialysate conductivity, pH, temperature, and absence of residual disinfectant per facility limits.

  • Bicarbonate dialysate conductivity is typically about 13 to 15 mS/cm; values outside the facility range require investigation before treatment.

  • The air detector must alarm and stop the blood pump when air is detected; bypassing or ignoring air alarms is prohibited.

  • Low venous pressure may indicate line separation, needle dislodgement, or low blood flow; high venous pressure may indicate occlusion or infiltration.

  • Ultrafiltration rate equals ultrafiltration goal in milliliters divided by treatment time in hours; compare calculated rate with the prescribed goal.

  • Transmembrane pressure is the pressure gradient across the dialyzer membrane and reflects ultrafiltration and membrane fouling.

  • The blood leak detector alarms when blood is detected in dialysate; treatment should stop or flow divert per machine protocol.

  • After chemical disinfection, test for residual disinfectant before use; residual chemical can cause hemolysis or patient injury.

Quick reference

Water Treatment and Dialysate Preparation

  • Carbon tanks remove chlorine and chloramine; test treated water before each shift and after carbon tank backwash because chloramine can cause hemolysis.

  • AAMI hemodialysis water limits include chlorine and chloramine below 0.1 mg/L; facility policy may be stricter.

  • Reverse osmosis removes dissolved ions and contaminants; monitor feed and permeate conductivity and percent rejection.

  • Water softeners remove calcium and magnesium; test hardness per policy because hardness breakthrough can damage RO membranes.

  • Deionization tanks exchange ions but may release captured ions when exhausted; monitor resistivity and replace or regenerate per policy.

  • Bicarbonate dialysate must be mixed per manufacturer instructions; verify conductivity, pH, and use within the facility's time limit.

  • Dialysate is typically warmed to about 37°C; high temperature can cause hemolysis and low temperature can cause chills.

  • Water distribution loops are kept in continuous flow to reduce stagnation and biofilm; disinfect per facility policy.

Quick reference

Infection Control and Patient Safety

  • Hand hygiene is performed before and after patient contact, after glove removal, and after contact with blood, body fluids, or contaminated equipment.

  • Standard precautions require gloves for blood/body fluid contact and mask, eye protection, or gown when splashes are likely.

  • Clean the access site or catheter hub with an approved antiseptic and allow it to dry before cannulation or connection.

  • Hepatitis B surface antigen-positive patients generally require a separate room and dedicated machine in hemodialysis; follow facility policy.

  • Needlestick: wash with soap and water, report immediately, and follow post-exposure evaluation and prophylaxis; do not squeeze the wound.

  • Blood spills: wear gloves, absorb visible blood, then disinfect with an approved agent such as 1:10 bleach at the required contact time.

  • Single-use supplies are not shared between patients; shared equipment is cleaned and disinfected between uses.

  • Fever, chills, or access site drainage may indicate bloodstream infection and require prompt reporting.

Quick reference

Professional Practice, Education, and Role Responsibilities

  • CCHT scope includes performing hemodialysis tasks under RN or physician supervision; technicians do not independently diagnose, prescribe, or alter prescriptions.

  • Document pre- and post-dialysis weights, vital signs, medications, access assessment, alarms, interventions, and patient response.

  • Use teach-back to confirm patient understanding of fluid limits, sodium/potassium/phosphorus diet, medications, and access care.

  • HIPAA protects health information; share only with authorized persons who need it for care, payment, or operations.

  • Report errors, injuries, and near misses promptly through the facility incident reporting system.

  • CCHT certification renewal requires continuing education and adherence to certification body requirements; maintain CPR/BLS per employer policy.

  • Patient rights include privacy, informed consent, dignity, and the right to ask questions about care.

  • Professional boundaries include avoiding personal relationships or financial transactions that could exploit patients.

CCHT key terms

Hemodialysis

A treatment that removes waste products, extra fluid, and electrolytes from the blood by pumping it through an artificial filter outside the body and returning the cleaned blood to the patient.

Related: Dialyzer, Ultrafiltration
Ultrafiltration

The removal of excess fluid from the blood, achieved by creating a pressure difference across the dialyzer membrane that pushes plasma water into the dialysate compartment.

Related: Transmembrane pressure (TMP), Target weight
Transmembrane pressure (TMP)

The average pressure difference between the blood side and the dialysate side of the dialyzer membrane; it drives fluid removal, so raising TMP increases ultrafiltration.

Related: Ultrafiltration, Blood flow rate
Dialyzer

A cartridge holding thousands of hollow fibers that act as a semipermeable membrane, letting wastes and fluid pass from blood into dialysate while keeping cells and proteins in the blood.

Related: Hemodialysis, Blood leak detector
Dialysate

A fluid made from purified water plus electrolyte concentrates that flows past the dialyzer membrane, drawing wastes out of the blood and replacing needed minerals.

Related: Conductivity, Reverse osmosis
Conductivity

A measurement of how well dialysate carries an electrical current, used to confirm that water and concentrate are mixed in the correct proportion before treatment begins.

Related: Dialysate
Reverse osmosis

A water purification step that forces water under pressure through a special membrane, removing dissolved salts, bacteria, and most other contaminants from the water supply.

Related: AAMI standards, Hardness test
Hardness test

A check measuring calcium and magnesium levels in treated water; a high result warns that the water softener needs recharging and that the reverse osmosis membrane may be at risk.

Related: Reverse osmosis
Total chlorine test

A test run before each patient shift to confirm carbon tanks have removed chlorine and chloramine from the water supply, since these chemicals can destroy red blood cells during dialysis.

Related: Hemolysis, Reverse osmosis
Limulus amebocyte lysate (LAL) test

A laboratory test using horseshoe crab blood extract to detect bacterial endotoxin in water or dialysate, which can cause fever, chills, and shock in dialysis patients.

Related: AAMI standards, Dialysate
AAMI standards

Widely adopted guidelines from the Association for the Advancement of Medical Instrumentation that set chemical, microbial, and endotoxin limits for dialysis water and dialysate.

Related: Limulus amebocyte lysate (LAL) test, Reverse osmosis
Arteriovenous fistula (AVF)

A surgically created connection between an artery and a nearby vein, usually in the forearm, that enlarges the vein so it can carry the high blood flow dialysis needs.

Related: Bruit, Thrill
Arteriovenous graft (AVG)

A synthetic tube tunneled under the skin to join an artery and a vein when the patient's own vessels cannot support a fistula; it can be used sooner but clots more easily.

Related: Arteriovenous fistula (AVF), Bruit
Central venous catheter (CVC)

A tube placed in a large vein of the neck, chest, or groin to provide dialysis access; it carries the highest risk of bloodstream infection and clot formation.

Related: Standard precautions, Disinfection
Bruit

The whooshing sound heard through a stethoscope placed over a vascular access; its presence and pitch help confirm that blood is flowing through the fistula or graft.

Related: Thrill, Arteriovenous fistula (AVF)
Thrill

The buzzing or vibrating sensation felt when fingertips rest over a working vascular access, produced by blood moving through the fistula or graft.

Related: Bruit, Arteriovenous graft (AVG)
Target weight

The body weight at which a patient is believed to have no excess fluid, used to calculate how much fluid should be removed during each treatment.

Related: Ultrafiltration, Intradialytic hypotension
Intradialytic hypotension

A drop in blood pressure during treatment that may cause dizziness, nausea, sweating, cramping, or fainting; care includes slowing or stopping fluid removal and repositioning the patient.

Related: Muscle cramps, Target weight
Muscle cramps

Painful involuntary contractions that often occur during dialysis, commonly triggered by rapid fluid removal or electrolyte shifts and relieved by slowing ultrafiltration or giving saline.

Related: Intradialytic hypotension
Disequilibrium syndrome

A rare complication of dialysis marked by headache, nausea, confusion, or seizures, caused by urea leaving the blood faster than the brain can adjust.

Related: Hemodialysis
Hemolysis

The breakdown of red blood cells, which during dialysis can result from kinked lines, wrong pump settings, or contaminated dialysate and appears as dark red blood in the lines.

Related: Total chlorine test, Blood leak detector
Blood leak detector

A sensor on the dialysate line that alarms and stops the blood pump if blood crosses a ruptured dialyzer membrane and leaks into the dialysate.

Related: Dialyzer, Hemolysis
Heparin

An anticoagulant given during dialysis to keep blood from clotting in the tubing and dialyzer; the dose is adjusted to each patient's bleeding risk.

Related: Saline rinseback
Saline rinseback

Returning blood left in the tubing and dialyzer to the patient at the end of treatment using sterile saline, which reduces blood loss and keeps the treatment safe.

Related: Heparin
Kt/V

A formula describing dialysis adequacy, where K is clearance, t is treatment time, and V is urea distribution volume; higher values mean more urea was removed.

Related: Urea reduction ratio (URR), Blood flow rate
Urea reduction ratio (URR)

The percentage drop in blood urea nitrogen between the start and end of a treatment, used along with Kt/V to judge how well dialysis is cleaning the blood.

Related: Kt/V
Blood flow rate

The speed at which blood is pumped through the tubing and dialyzer, typically 200 to 500 mL per minute, which affects clearance and pressure alarms.

Related: Transmembrane pressure (TMP), Kt/V
Air embolism

Air entering the bloodstream through a loose connection or emptied line, which can block blood flow to the lungs or brain and is a life-threatening emergency.

Related: Central venous catheter (CVC), Standard precautions
Standard precautions

Infection control practices applied to every patient, including hand hygiene, gloves, gowns, masks, and eye protection whenever contact with blood or body fluids is possible.

Related: Hand hygiene, Personal protective equipment (PPE)
Hand hygiene

Cleaning hands with soap and water or an alcohol-based rub before and after patient contact and after removing gloves; it is the single most effective way to prevent infection.

Related: Standard precautions, Personal protective equipment (PPE)
Personal protective equipment (PPE)

Gloves, gown, mask, and eye protection worn to create a barrier between the caregiver and blood, body fluids, or splashes during patient care tasks.

Related: Standard precautions, Hand hygiene
Hepatitis B surface antigen (HBsAg)

A blood marker showing active hepatitis B infection; patients who test positive are dialyzed in a separate area with dedicated machines and supplies to prevent spread.

Related: Standard precautions, Disinfection
Sharps injury

An accidental needlestick or cut from a contaminated needle or blade, which must be reported immediately and evaluated for post-exposure testing and treatment.

Related: Personal protective equipment (PPE), Standard precautions
Disinfection

Using chemical agents to destroy most disease-causing organisms on surfaces and equipment; dialysis machines are disinfected between treatments and dialyzers may be reprocessed.

Related: Standard precautions, Central venous catheter (CVC)
Scope of practice

The range of duties a technician is legally and professionally allowed to perform, defined by state law, certification requirements, and employer policy.

Related: Chain of command
Chain of command

The defined order in which a technician reports problems or concerns, typically the charge nurse first, then the facility manager, then the medical director.

Related: Scope of practice
Informed consent

A patient's voluntary agreement to treatment after being told the risks, benefits, and alternatives; the technician's role is to confirm that consent is properly documented.

Related: Care plan, HIPAA
Care plan

An individualized written plan created by the interdisciplinary team listing the patient's goals, prescribed treatments, and interventions; technicians follow it and report changes.

Related: Target weight, Continuous quality improvement (CQI)
Continuous quality improvement (CQI)

An ongoing team process of collecting data, identifying problems, and testing changes in order to improve patient outcomes, safety, and facility performance.

Related: Care plan
HIPAA

A federal law that protects the privacy and security of patient health information, limiting who may access, discuss, or share it.

Related: Informed consent

CCHT study plan

8 weeks · About 7 hours per week

Week 1

Patient Care and Assessment

  • Map the normal range, clinical meaning, and one nursing action for each abnormal value of BUN, creatinine, potassium, calcium, phosphorus, albumin, and hematocrit

  • Explain the mechanism and first-line response for intradialytic hypotension, muscle cramps, nausea/vomiting, headache, and disequilibrium syndrome

  • Calculate ultrafiltration goal, ultrafiltration rate, and estimated dry weight adjustment from supplied patient data

  • Sequence the pre-treatment, intradialytic, and post-treatment assessments, including access assessment and orthostatic vital signs

Your checkpoint

One-page patient assessment reference sheet plus 10 self-written case vignettes with answer rationales

Week 2

Dialysis Procedures and Equipment

  • Trace blood and dialysate flow through the extracorporeal circuit and state the function of each component

  • Compare arteriovenous fistula, arteriovenous graft, and central venous catheter care, including cannulation technique, needle gauge, and site rotation

  • Explain the cause and correct response for at least eight common machine alarms, including air detector, arterial pressure, venous pressure, transmembrane pressure, conductivity, and blood leak

  • Rehearse machine setup, pre-treatment safety checks, and rinse/recirculation steps aloud or on a trainer

Your checkpoint

Annotated circuit diagram plus an alarm-response table listing alarm, cause, immediate action, and prevention

Week 3

Water Treatment and Dialysate Preparation

  • Sequence the water treatment train, including backwash, carbon adsorption, softening, reverse osmosis, deionization, and distribution loop, and name the contaminant each step removes

  • State the accepted limit and the test method for chlorine/chloramine, hardness, conductivity, and bacterial/endotoxin counts

  • Describe how dialysate is proportioned and monitored for conductivity, pH, temperature, and sodium variation

  • Outline disinfection schedules and culture/monitoring frequency for water systems and dialysate

Your checkpoint

Water treatment flow diagram with a companion table of test method, limit, and testing frequency

Week 4

Infection Control and Patient Safety

  • Apply standard and transmission-based precautions to dialysis-specific scenarios, including hepatitis B surface antigen positivity and multidrug-resistant organism colonization

  • Describe catheter care bundles, exit-site assessment, and vascular access infection prevention practices

  • Differentiate single-use from reused dialyzers and explain disinfection and reprocessing requirements for machines and supplies

  • Explain cohorting, isolation, and healthcare-associated infection reporting expectations in a dialysis unit

  • List vaccination and screening recommendations for dialysis patients, including hepatitis B, influenza, pneumococcal, and tuberculosis screening

Your checkpoint

Infection control worksheet covering 12 clinical scenarios, each answered with the correct precaution level and rationale

Week 5

Professional Practice, Education, and Role Responsibilities

  • Distinguish the scope of practice, delegation boundaries, and reporting lines of the technician, registered nurse, and physician

  • Explain informed consent, patient rights, confidentiality, and the appropriate response when a patient refuses treatment

  • Write objective documentation entries for a treatment, an incident, and an adverse event

  • Identify certification renewal, continuing education, and professional development requirements

Your checkpoint

Written responses to 8 legal, ethical, and professional scenarios, each with a short justification grounded in scope-of-practice principles

Week 6

Patient Care and Assessment & Dialysis Procedures and Equipment & Infection Control and Patient Safety

  • Work through 15 integrated scenarios that combine assessment findings, machine data, and infection control decisions

  • Reconstruct the complete treatment timeline from pre-assessment through post-treatment documentation without notes

  • Apply the SBAR format to escalate a deteriorating patient and identify the correct handoff recipient

Your checkpoint

Timed 40-question self-written mixed quiz, scored at 80 percent or higher

Week 7

Patient Care and Assessment & Dialysis Procedures and Equipment & Water Treatment and Dialysate Preparation & Infection Control and Patient Safety & Professional Practice, Education, and Role Responsibilities

  • Re-teach the two lowest-scoring domains from the week 6 quiz using the reference sheets

  • Rebuild flashcards for every missed item and rehearse them until two consecutive passes reach full recall

  • Solve 30 calculation problems covering ultrafiltration, dialysate mixing ratios, and weight-based dosing

Your checkpoint

Revised study sheets plus a calculation worksheet completed at 90 percent accuracy or higher

Week 8

Patient Care and Assessment & Dialysis Procedures and Equipment & Water Treatment and Dialysate Preparation & Infection Control and Patient Safety & Professional Practice, Education, and Role Responsibilities

  • Complete two full-length timed practice exams and review every missed item to the underlying concept

  • Recite the 50 highest-yield facts from memory, organized by domain

  • Confirm test-day logistics, timing strategy, and a rest plan for the final 48 hours

Your checkpoint

Final practice exam scored at 85 percent or higher with a written error log of every missed item

Milestones

Week 2: Explain the full extracorporeal circuit and respond correctly to 8 alarm scenarios without notes

Week 4: Score at least 75 percent on a 25-question self-made quiz covering domains 1 through 4

Week 6: Score at least 80 percent on the timed 40-question integrated quiz and complete the SBAR handoff unaided

Week 8: Score at least 85 percent on two consecutive full-length practice exams with all errors logged and reviewed

CCHT exam day

Your checklist

Government-issued photo ID

Bring the original, unexpired ID you registered with. The name on it must match your registration record exactly; if your legal name differs from your registration, resolve it with the certifying body before test day rather than at the counter. Confirm the specific accepted ID types with the provider - policies on expired IDs, photocopies, and secondary ID vary.

Appointment confirmation / authorization to test

Have your confirmation email or admission notice available, with your candidate/eligibility number. Confirm with the provider whether a printed copy is required or a phone screen is accepted.

Test center address and travel plan

Look up the exact testing location the night before, check for construction or transit disruptions, and plan to arrive well before your appointment time. Ask the provider how early they recommend arriving and what happens if you are late.

Leave prohibited items behind

Phones, smartwatches, fitness trackers, notes, textbooks, and study cards are not allowed in the testing room. Plan to leave them at home or secured as the center directs; most centers provide a locker, but confirm.

Know the reschedule and no-show policy

Check the provider's rules on rescheduling, cancellation fees, and forfeiture of fees for missed appointments before the final 72 hours, in case something goes wrong.

Comfortable layered clothing

Testing rooms are often cool and you may be seated for a long stretch. Dress in layers and avoid clothing with large pockets or logos that a proctor may ask you to remove.

Light meal, water, and any needed medication

Eat a normal meal beforehand and bring water for before and after the exam. Expect food and drink to be barred from the testing room. Take routine medication on schedule; if you need to bring medication or supplies into the center, confirm the accommodation procedure in advance.

Your own one-page summary sheet to review, then put away

Limit last-minute review to a single page of your own notes - key terminology, normal lab ranges, and safety sequences you have already studied. Do not try to learn new material in the final hours.

Confirm the appointment is still valid

Re-check your confirmation email and the test center's status the day before. If you do not receive a reminder, contact the provider to verify the appointment.

A plan for after the test

Avoid scheduling anything demanding immediately afterward. Know how you will get home and whether you want someone to check in with you.

Plan the day

Final 72 hours

Stop adding new material. Run through practice questions on your weakest domains, review your own summary sheet, and re-read the provider's candidate handbook for ID, conduct, break, and scoring rules. Confirm your appointment time, location, and what to bring. Protect sleep - do not trade sleep for extra cramming.

Final 24 hours

Pack your ID and confirmation in one place. Lay out clothing. Do a short review of high-yield safety content only (infection control, dialyzer and machine setup checks, monitoring and abnormal-value response). Set two alarms. Check the provider's site for any last-minute notice about the center. Go to bed at your normal time.

Morning of

Eat a normal meal, take routine medications, and arrive early. Leave your phone and watch secured as directed. Use the restroom right before check-in. At the desk, present your ID, complete check-in, and follow the proctor's instructions for storing belongings, emptying pockets, and any security screening.

During the test

Read the instructions screen before the clock matters to you. Work at a steady pace and answer every item if the format allows it. Flag items you want to revisit and return to them rather than stalling. Use the allotted break only if you need it, and remember the clock generally keeps running - confirm this with the provider. If equipment fails or a distraction occurs, raise your hand and ask the proctor to note it rather than trying to fix it yourself.

After the test

Follow the provider's process for receiving your result; do not assume an unofficial score shown on screen is final. If you did not pass, review the score report's domain breakdown before scheduling a retake, and check the retake waiting period and fees.

Rules to check

  • Bring valid, unexpired government-issued photo ID. The name must match your registration exactly; name mismatches are a common reason candidates are turned away, so correct discrepancies with the provider in advance.

  • Personal items are not permitted in the testing room. Expect to store belongings in a provided locker and to be subject to security screening; confirm the specifics with the provider before test day.

  • Follow all proctor instructions. Talking, using unauthorized materials, or attempting to remove or photograph exam content is grounds for dismissal and may void your result. You will likely be asked to accept a confidentiality agreement - read it.

  • Break policies vary by certifying body and test center. Ask in advance how many breaks are allowed, whether the clock runs during them, and whether you must be escorted. Do not assume a scheduled break exists.

  • Scoring is done by the certifying body, not the test center staff. Pass points are typically set on a scaled score rather than a raw percentage, so do not try to guess your result from the number of items you answered. Confirm the scoring method and reporting timeline with the provider.

  • Whether unanswered items or guessing are penalized is provider-specific. Confirm this before the exam; on most computer-delivered certification exams only correct answers count, so leaving items blank usually offers no advantage.

  • If you require testing accommodations, you generally must request and be approved for them well before test day. Contact the provider early - accommodations are rarely granted on the day of the exam.

  • Verify the retake policy, waiting period, and fee schedule with the provider rather than relying on secondhand information.

CCHT FAQ

How many CCHT practice questions are available?

The practice set has 200 CCHT questions. Each one includes the choices, the correct answer, and an explanation, and the set is free to read with no signup.

How many CCHT flashcards are available?

The flashcard set has 32 CCHT cards. Each card shows the term and its definition.

Which topics does the CCHT study material cover?

The CCHT study material has 5 sections, including Patient Care and Assessment, Dialysis Procedures and Equipment, and Water Treatment and Dialysate Preparation.

What format facts does the catalog list for the CCHT exam?

The catalog lists these item types: multiple choice for the CCHT exam.