ASCP PBT overview

  • 200 practice questions
  • 32 flashcards
  • 8 study guide topics
  • 36 key terms

What you'll study

  • Phlebotomy
  • Blood Banking
  • Clinical Chemistry
  • Coagulation
  • Hematology
  • Immunology
  • Laboratory Administration
  • Microbiology

The ASCP Phlebotomy Technician (PBT) certification is a credential for laboratory professionals who collect and handle blood specimens, offered through the ASCP Board of Certification's initial certification pathway. ASCP organizes its education and certification-preparation content by content area, and phlebotomy is one of those areas, appearing alongside Blood Banking, Clinical Chemistry, Coagulation, Hematology, Immunology, Laboratory Administration, and Microbiology. Candidates typically prepare through a combination of formal phlebotomy training, supervised clinical collection experience, and structured review of specimen collection technique, order of draw, patient identification, safety and infection control, and specimen handling and transport. Because the credential tests both technical skill and professional judgment, effective preparation pairs hands-on practice with deliberate review of the areas where collections most often go wrong: mislabeled tubes, incorrect draw order, short draws, and hemolyzed specimens. This page is an independent study resource and is not affiliated with or endorsed by ASCP. Specific exam logistics such as item count, time limit, fee, passing score, retake rules, and recertification intervals are set by the certifying body and change over time, so confirm current details directly with ASCP before you register or schedule.

Common mistakes

Choosing the lavender (EDTA) tube for a chemistry or coagulation test because 'purple is the general tube'

Candidates learn EDTA as the default hematology anticoagulant and stop tracking that EDTA chelates calcium and destroys the clotting cascade and many chemistry analytes

What to do instead

Memorize the tube-to-department map by additive mechanism, not color alone: EDTA binds Ca2+ so it is hematology-only; citrate reversibly binds Ca2+ so it is coagulation-only; heparin and serum tubes serve chemistry. Rehearse 'what does the additive do to the assay' for each tube

Reciting the order of draw as a color list without being able to justify the sequence

Rote memorization collapses when a question presents a nonstandard tube or asks why a position exists (e.g., why citrate precedes serum)

What to do instead

Learn the rationale: sterile/non-additive first to protect sterility and avoid additive carryover, then citrate, then serum with/without clot activator, then heparin, then EDTA, then fluoride/oxalate. Tie each position to carryover or contamination risk

Transfusing a unit based on a negative antibody screen without confirming the crossmatch/electronic issue is valid, or ignoring a positive antibody screen as 'probably cold'

Candidates conflate the screen with the final compatibility check and underestimate clinically significant alloantibodies that can cause delayed hemolytic reactions

What to do instead

Treat a positive screen as requiring identification and antigen-negative or crossmatch-compatible units. Practice the decision tree: screen positive, identify antibody, select antigen-negative units, crossmatch. Know when electronic crossmatch is prohibited

Reporting a critical chemistry value without checking for a preanalytical cause such as hemolysis, lipemia, or IV fluid contamination

Candidates jump to the clinical interpretation and forget that hemolysis falsely raises potassium, LDH, and AST while diluting others

What to do instead

Before reporting, apply a preanalytical checklist: specimen integrity, hemolysis index, collection site relative to an IV line, and turnaround. State which analytes are affected and by which direction

Interpreting a prolonged aPTT or PT by guessing a single factor deficiency instead of using the mixing study logic

Candidates memorize 'prolonged aPTT equals heparin' and skip the correction-versus-noncorrection distinction that separates factor deficiency from an inhibitor

What to do instead

Apply the mixing study algorithm: correction on immediate mix suggests factor deficiency; failure to correct suggests inhibitor or heparin. Then use specific factor assays. Know which pathway each test monitors

Reading a CBC or smear without correlating automated indices to the morphology, e.g., accepting a normal MCV when the smear shows microcytosis or schistocytes

Candidates trust the analyzer flag and stop looking, or vice versa, and miss that analyzer results can be skewed by cold agglutinins, lipemia, or clumping

What to do instead

Build a habit of comparing MCV, MCHC, RDW, and platelet count against the smear description. Know the classic analyzer artifacts (cold agglutinin falsely raising MCV and RBC, platelet clumping falsely lowering count) and the corrective step

Confusing the roles of screening versus confirmatory serology and misreading a reactive screening test as a diagnosis

Candidates treat any positive immunoassay as definitive and skip the confirmatory or supplemental step and the window period concept

What to do instead

For each immunoassay, state the screening test, the confirmatory test, and the interpretation caveats (window period, cross-reactivity, prior vaccination). Practice answering 'what is the next step' rather than 'what is the diagnosis'

Answering laboratory administration questions from personal intuition about staffing or quality rather than the regulatory framework

Candidates have clinical strength but weak recall of CLIA complexity categories, proficiency testing, and quality indicator definitions, so they pick plausible-sounding but noncompliant answers

What to do instead

Anchor each administrative topic to its governing concept: test complexity categories, personnel qualification tiers, proficiency testing failure consequences, and the difference between quality control and quality assurance. Learn the corrective-action sequence for an out-of-control event

Selecting an organism identification or media choice from memorized buzzwords without matching the specimen source and expected pathogen

Candidates memorize a few colony descriptions but cannot reason from Gram stain and specimen site to the appropriate media and confirmatory test

What to do instead

Practice source-to-workup reasoning: Gram stain result plus specimen type narrows media and identification. Know key selective and differential media purposes and the confirmatory test for common isolates rather than isolated colony trivia

Managing time by lingering on calculation or interpretation items and leaving patient-safety or specimen-collection items unanswered

Candidates over-invest in hard quantitative questions and run out of time on the high-yield, quickly answerable items that make up much of the exam

What to do instead

Pre-plan a time budget, flag and move past any item exceeding roughly a minute, and prioritize the domains where recall is fast (order of draw, tube/additive, safety). Return to flagged calculations with remaining time

Exam requirements can change. Confirm current details with the exam provider.

ASCP PBT practice

200 questions. Each one lists the choices, the correct answer, and an explanation. With JavaScript, this list opens one question at a time. The checker at the top of this page saves progress in this browser when it is available.

  1. Question 1Phlebotomy

    Which needle gauge is most appropriate for routine venipuncture of a healthy adult with a prominent median cubital vein?

    1. 16 gauge
    2. 30 gauge
    3. 21 gauge Correct answer.
    4. 25 gauge

    Explanation

    A 21-gauge needle is the standard choice for routine adult venipuncture because it balances adequate blood flow with vessel and patient comfort. Larger gauges (smaller numbers) increase trauma risk, and much smaller gauges are reserved for fragile or pediatric veins.

  2. Question 2Phlebotomy

    What is the maximum recommended length of time a tourniquet should remain applied during a routine venipuncture?

    1. 10 minutes
    2. 10 seconds
    3. 5 minutes
    4. 1 minute Correct answer.

    Explanation

    A tourniquet should be released within 1 minute of application. Prolonged constriction causes hemoconcentration and shifts in analyte concentrations, and it increases patient discomfort.

  3. Question 3Phlebotomy

    In the standard order of draw for evacuated tubes, which tube is collected first?

    1. Lavender EDTA
    2. Light blue sodium citrate
    3. Blood culture Correct answer.
    4. Serum separator

    Explanation

    Blood culture tubes are drawn first to minimize contamination risk from skin flora and to preserve sterility. Sterile or additive-free considerations place them ahead of coagulation and additive tubes.

  4. Question 4Phlebotomy

    Which additive is present in a lavender-top evacuated tube?

    1. Silica clot activator
    2. Sodium citrate
    3. Potassium EDTA Correct answer.
    4. Sodium heparin

    Explanation

    Lavender-top tubes contain EDTA, typically as the potassium salt, which chelates calcium to prevent clotting. This additive is used for hematology testing such as complete blood counts.

  5. Question 5Phlebotomy

    Which site is generally the preferred first choice for venipuncture in an adult?

    1. Dorsal hand veins
    2. Cephalic vein
    3. Median cubital vein Correct answer.
    4. Basilic vein

    Explanation

    The median cubital vein is preferred because it is well anchored, large, and less likely to roll or injure nearby structures. The basilic and cephalic veins are acceptable alternatives but carry more risk or difficulty.

  6. Question 6Phlebotomy

    After a venipuncture, which action should the phlebotomist take to promote hemostasis at the site?

    1. Apply pressure with a clean gauze for several minutes Correct answer.
    2. Bend the arm sharply at the elbow
    3. Apply a warm compress immediately
    4. Massage the puncture site briskly

    Explanation

    Firm pressure with clean gauze for several minutes allows a clot to form and prevents hematoma. Bending the arm or massaging the site can disrupt clot formation and increase bruising.

  7. Question 7Phlebotomy

    Which action best describes proper hand hygiene before a venipuncture procedure?

    1. Rinse hands with water only
    2. Apply gloves without washing hands
    3. Wipe hands on a clean paper towel
    4. Use an alcohol-based rub or soap and water, then allow to dry Correct answer.

    Explanation

    Hands should be cleaned with soap and water or an alcohol-based rub and allowed to dry before donning gloves. This reduces the risk of transmitting organisms to the patient and the site.

  8. Question 8Phlebotomy

    What is the primary purpose of cleansing the venipuncture site with an antiseptic before needle insertion?

    1. To numb the skin
    2. To reduce skin flora and prevent contamination Correct answer.
    3. To slow blood flow
    4. To make the vein more visible

    Explanation

    Antiseptic cleansing reduces transient and resident skin flora at the puncture site, lowering the risk of contaminating the specimen or causing infection. The antiseptic must be allowed to dry before puncture.

  9. Question 9Phlebotomy

    A phlebotomist collects a light blue citrate tube and notices the tube is only half filled. What is the most appropriate action?

    1. Add saline to bring the tube to the fill line
    2. Submit the specimen because the color indicates the additive
    3. Recollect the tube to obtain the correct blood-to-additive ratio Correct answer.
    4. Centrifuge the tube twice before testing

    Explanation

    Citrate tubes require a specific blood-to-additive ratio, and underfilling dilutes the anticoagulant effect, altering coagulation results. The correct action is to recollect a properly filled tube.

  10. Question 10Phlebotomy

    During a draw, the phlebotomist notes the blood flow stops and a small bruise begins forming under the skin around the needle. What is the most appropriate immediate response?

    1. Aspirate vigorously with the syringe
    2. Rotate the needle a quarter turn and continue
    3. Withdraw the needle, apply pressure, and select another site Correct answer.
    4. Push the needle deeper to re-enter the vein

    Explanation

    A developing hematoma indicates the needle has left the vein or the vein is leaking, so the draw should be stopped. The needle is removed, pressure is applied, and a different site is chosen if a specimen is still needed.

  11. Question 11Phlebotomy

    A patient reports fainting during a previous blood draw and feels lightheaded as the needle is prepared. What is the best preventive action?

    1. Proceed quickly without pausing
    2. Position the patient reclined and monitor closely Correct answer.
    3. Have the patient stand during the draw
    4. Ask the patient to hold their breath

    Explanation

    A reclined position reduces the risk of injury from syncope and improves cerebral perfusion if the patient feels faint. Close monitoring and prompt response are essential for patients with a history of vasovagal reactions.

  12. Question 12Phlebotomy

    Which specimen tube should be collected before a serum separator tube when both are ordered?

    1. Gray fluoride tube
    2. Green heparin tube
    3. Lavender EDTA tube
    4. Light blue citrate tube Correct answer.

    Explanation

    Coagulation tubes (light blue) are drawn before serum tubes because additive carryover can affect coagulation testing. The standard order places citrate tubes ahead of serum separator tubes.

  13. Question 13Phlebotomy

    A phlebotomist is drawing blood from an arm with an active intravenous line. Which approach is correct?

    1. Draw from the opposite arm whenever possible Correct answer.
    2. Draw from the IV tubing port
    3. Draw from the same arm above the IV site
    4. Draw from the same arm below the IV site

    Explanation

    Drawing from the arm opposite an IV line avoids specimen dilution and contamination from infusing fluids. If the opposite arm is unavailable, a distal site below the IV may be considered per policy, but the opposite arm is preferred.

  14. Question 14Phlebotomy

    Which practice best prevents needlestick injuries during disposal of a used needle?

    1. Bending the needle before disposal
    2. Placing the needle in a biohazard bag
    3. Activating the safety device and placing it in a sharps container immediately Correct answer.
    4. Recapping the needle with one hand

    Explanation

    Immediately activating the safety feature and depositing the needle in a puncture-resistant sharps container prevents needlestick injuries. Recapping and bending needles are high-risk practices that are discouraged.

  15. Question 15Phlebotomy

    A blood specimen for a chemistry panel is collected in a tube containing EDTA. What is the most likely effect on the results?

    1. Falsely elevated glucose only
    2. No effect on any analyte
    3. Improved accuracy of all tests
    4. Falsely low calcium and altered electrolyte results Correct answer.

    Explanation

    EDTA chelates calcium and also introduces potassium and sodium depending on the salt form, so chemistry results such as calcium and electrolytes are altered. Chemistry testing requires serum or heparinized plasma, not EDTA plasma.

  16. Question 16Phlebotomy

    A phlebotomist must collect blood from a patient with a fragile, small vein in the hand. Which equipment combination is most appropriate?

    1. 21-gauge needle with a large-volume tube holder
    2. 18-gauge needle with an evacuated tube
    3. 16-gauge needle with a syringe
    4. 23-gauge butterfly needle with a small-volume tube Correct answer.

    Explanation

    A small-gauge butterfly needle is suited to fragile or small veins and reduces trauma, and small-volume tubes prevent excessive suction that can collapse the vein. Larger needles are inappropriate for such veins.

  17. Question 17Phlebotomy

    Which action is correct when a patient's arm veins are not visible and the first attempt is unsuccessful?

    1. Release the tourniquet, reassess, and try a different site or apply a warm compress Correct answer.
    2. Use a larger needle to improve flow
    3. Apply the tourniquet more tightly and reinsert at the same site
    4. Probe repeatedly with the needle in the same site

    Explanation

    After an unsuccessful attempt, the tourniquet should be released and the site reassessed; warming the arm can help dilate veins. Repeated probing at one site increases trauma and patient discomfort.

  18. Question 18Phlebotomy

    A specimen is collected in a tube with a clot activator but is not mixed. What is the most likely consequence?

    1. The tube will hemolyze immediately
    2. The blood will remain anticoagulated
    3. The additive will be neutralized
    4. The specimen will clot incompletely and yield poor serum Correct answer.

    Explanation

    Clot activator tubes require gentle inversion to mix the additive with blood so a complete clot forms and serum can be separated. Without mixing, clotting may be incomplete and the serum sample compromised.

  19. Question 19Phlebotomy

    Which of the following best describes the correct technique for mixing an anticoagulated blood tube after collection?

    1. Shake vigorously up and down
    2. Vortex on a mixer for one minute
    3. Invert gently several times Correct answer.
    4. Roll between the palms once

    Explanation

    Gentle inversion several times ensures the additive mixes with the blood without causing hemolysis. Vigorous shaking or vortexing damages red cells and alters results.

  20. Question 20Phlebotomy

    A phlebotomist needs to collect a specimen for coagulation testing and also a serum chemistry panel. Which sequence is correct?

    1. Citrate tube, then serum tube Correct answer.
    2. Serum tube, then citrate tube
    3. EDTA tube, then citrate tube
    4. Heparin tube, then citrate tube

    Explanation

    Coagulation tubes must be drawn before tubes containing other additives to avoid carryover that can interfere with clotting tests. Therefore the citrate tube precedes the serum tube.

  21. Question 21Phlebotomy

    A patient has a hematoma forming at the puncture site and reports sharp pain radiating down the arm. What does this most likely indicate?

    1. Arterial puncture or nerve involvement requiring immediate needle withdrawal Correct answer.
    2. Normal venous filling
    3. Proper needle position
    4. Adequate tourniquet pressure

    Explanation

    Radiating pain and rapid hematoma formation suggest the needle may have struck an artery or nerve, and the needle should be withdrawn immediately. Pressure should be applied longer for arterial punctures, and the event documented.

  22. Question 22Phlebotomy

    A phlebotomist collects a specimen in a tube containing sodium citrate but the patient's hematocrit is markedly elevated. Why does this matter?

    1. The additive will evaporate
    2. The citrate volume may be excessive relative to plasma, altering coagulation results Correct answer.
    3. The tube will clot prematurely
    4. The specimen will hemolyze

    Explanation

    Citrate tubes are formulated for a normal hematocrit; with marked polycythemia, the plasma volume is reduced so the fixed citrate volume is relatively excessive, prolonging clotting times. This can lead to inaccurate coagulation results.

  23. Question 23Phlebotomy

    A phlebotomist is asked to draw blood from a patient with a known bleeding disorder and very fragile veins. Which precaution is most important?

    1. Use a larger needle to shorten the procedure
    2. Apply the tourniquet for several minutes to engorge the vein
    3. Use the smallest needle possible and apply extended pressure after the draw Correct answer.
    4. Draw from the most distal small vein available

    Explanation

    Patients with bleeding disorders require minimal trauma and extended post-puncture pressure to reduce bleeding and hematoma risk. A small needle and careful technique help limit vessel injury.

  24. Question 24Phlebotomy

    During a draw, the phlebotomist observes that blood in the tube appears bright red and pulses into the tube under pressure. What is the most appropriate interpretation and action?

    1. This suggests the tourniquet is too loose; tighten it
    2. This suggests arterial puncture; withdraw the needle and apply prolonged pressure Correct answer.
    3. This indicates the tube is underfilled; continue
    4. This is normal venous flow; continue the draw

    Explanation

    Bright red, pulsatile flow indicates arterial blood, which can occur if the needle enters an artery. The needle should be withdrawn and firm pressure applied for a longer period to prevent hematoma, and the event documented.

  25. Question 25Phlebotomy

    A phlebotomist must collect blood from a patient receiving a heparin infusion through a line in the right arm. Which action best ensures an accurate specimen?

    1. Draw from the left arm, away from the infusion Correct answer.
    2. Draw from the right arm above the infusion site
    3. Draw from the infusion line after flushing
    4. Draw from the right arm below the infusion site

    Explanation

    Drawing from the arm opposite the infusion avoids dilution and contamination by the infusing drug. If only the infused arm is available, special procedures per policy are needed, but the opposite arm is preferred.

  26. Question 26Blood Banking

    Which ABO blood type is considered the universal donor for packed red blood cell transfusions?

    1. Type AB positive
    2. Type A positive
    3. Type O negative Correct answer.
    4. Type B negative

    Explanation

    Type O red cells lack A and B antigens, and O negative red cells also lack the D antigen, so they can be given to recipients of any ABO and Rh type without causing hemolysis. This makes O negative the universal red cell donor.

  27. Question 27Blood Banking

    A donor unit is labeled group A, Rh positive. Which antigen is present on the donor red cells in addition to the A antigen?

    1. D antigen Correct answer.
    2. Lewis antigen only
    3. I antigen only
    4. B antigen

    Explanation

    Rh positive means the D antigen is present on the red cells. Group A indicates the A antigen is present and B antigen is absent.

  28. Question 28Blood Banking

    What is the primary purpose of performing a forward and reverse ABO grouping?

    1. To determine the patient's Rh genotype
    2. To screen for irregular red cell antibodies
    3. To detect discrepancies between cell and serum typing Correct answer.
    4. To measure hemoglobin concentration

    Explanation

    Forward grouping tests the patient's red cells with known antisera, and reverse grouping tests the patient's serum against known A and B cells; comparing them detects discrepancies. Antibody screening and hemoglobin measurement are separate tests.

  29. Question 29Blood Banking

    Which anticoagulant is used in the collection of blood products for transfusion because it chelates calcium?

    1. EDTA
    2. CPD Correct answer.
    3. Heparin
    4. Sodium fluoride

    Explanation

    CPD (citrate-phosphate-dextrose) contains citrate, which binds calcium and prevents coagulation in collected blood units. Citrate-based solutions are standard for blood bank collection.

  30. Question 30Blood Banking

    What is the storage temperature range for whole blood and packed red blood cells?

    1. 20 to 24 degrees C
    2. 1 to 6 degrees C Correct answer.
    3. -18 to -25 degrees C
    4. 37 degrees C

    Explanation

    Red cells and whole blood are stored refrigerated at 1 to 6 degrees C to slow metabolic activity while maintaining viability. Room temperature, frozen, and body temperature are not appropriate for red cell storage.

  31. Question 31Blood Banking

    Which immunoglobulin class is responsible for naturally occurring ABO antibodies in serum?

    1. IgM Correct answer.
    2. IgA
    3. IgG
    4. IgE

    Explanation

    Naturally occurring ABO antibodies are predominantly IgM, which are large pentameric molecules that agglutinate red cells directly in saline. IgG ABO antibodies may also be present but are not the predominant naturally occurring class.

  32. Question 32Blood Banking

    What does a positive antibody screen indicate?

    1. An unexpected red cell antibody may be present Correct answer.
    2. The patient is ABO incompatible with all donors
    3. The patient's red cells are polyagglutinable
    4. The patient has a coagulopathy

    Explanation

    A positive antibody screen suggests the presence of an unexpected (non-ABO) red cell antibody that requires identification. It does not by itself indicate ABO incompatibility, coagulation problems, or polyagglutination.

  33. Question 33Blood Banking

    Which test is used to confirm the ABO type of a donor unit before labeling?

    1. Hemoglobin electrophoresis
    2. Repeat forward and reverse grouping on the donor sample Correct answer.
    3. Crossmatch against recipient serum
    4. Direct antiglobulin test

    Explanation

    Donor units are confirmed by repeating forward and reverse grouping on the donor sample to ensure the label matches the unit. The direct antiglobulin test, crossmatch, and hemoglobin electrophoresis serve different purposes.

  34. Question 34Blood Banking

    A patient's serum reacts with A1 cells but not with B cells, and the red cells react with anti-A but not anti-B. Which ABO discrepancy pattern is most consistent with these findings?

    1. Group B with extra anti-A
    2. Group AB with missing B antibody
    3. A subgroup with weak A antigen expression Correct answer.
    4. Group O with missing anti-A

    Explanation

    Weak or missing reverse anti-A with positive forward anti-A suggests an A subgroup such as A2 or weaker, where the patient may produce anti-A1. The forward and reverse results do not match a simple group AB, O, or B pattern.

  35. Question 35Blood Banking

    A patient's serum contains anti-D. Which red cell unit would be most appropriate for transfusion?

    1. Weak D positive
    2. D negative Correct answer.
    3. D positive
    4. D positive with a negative crossmatch

    Explanation

    A patient with anti-D must receive D negative red cells to avoid a hemolytic transfusion reaction. D positive and weak D positive units carry the D antigen and would be incompatible.

  36. Question 36Blood Banking

    Which antibody is most commonly associated with delayed hemolytic transfusion reactions?

    1. Anti-B
    2. Anti-Jka Correct answer.
    3. Anti-I
    4. Anti-A

    Explanation

    Delayed hemolytic transfusion reactions are most often caused by anamnestic IgG antibodies to red cell antigens such as Kidd (Jka), Rh, or Kell. Anti-A and anti-B cause acute hemolytic reactions, and anti-I is typically a cold autoantibody.

  37. Question 37Blood Banking

    What is the purpose of the immediate spin crossmatch?

    1. To detect IgG antibodies only
    2. To detect ABO incompatibility between donor and recipient Correct answer.
    3. To measure complement activity
    4. To confirm the donor's Rh type

    Explanation

    The immediate spin crossmatch primarily detects ABO incompatibility by demonstrating IgM-mediated agglutination. It does not detect IgG antibodies, measure complement, or confirm Rh typing.

  38. Question 38Blood Banking

    Which of the following is a characteristic of the indirect antiglobulin test (IAT)?

    1. It is used only for ABO typing
    2. It detects antibodies that sensitize red cells in vitro Correct answer.
    3. It requires no washing steps
    4. It detects antibodies bound to red cells in vivo

    Explanation

    The IAT detects antibodies in serum that bind to red cells during incubation in vitro, requiring washing and addition of antihuman globulin. The direct antiglobulin test detects in vivo sensitization.

  39. Question 39Blood Banking

    A unit of platelets is stored at 20 to 24 degrees C with continuous agitation primarily to do which of the following?

    1. Prevent bacterial growth
    2. Activate platelets for transfusion
    3. Maintain platelet viability and gas exchange Correct answer.
    4. Increase platelet count

    Explanation

    Platelets require room temperature storage with agitation to maintain viability and allow gas exchange. Agitation does not prevent bacterial growth, activate platelets, or increase the count.

  40. Question 40Blood Banking

    Which of the following best describes the function of antihuman globulin reagent?

    1. It lyses red cells directly
    2. It bridges antibody-coated red cells to produce visible agglutination Correct answer.
    3. It enhances complement fixation
    4. It neutralizes free antibody in serum

    Explanation

    Antihuman globulin contains antibodies against human immunoglobulins and complement, bridging sensitized red cells to create visible agglutination. It does not directly lyse cells, neutralize antibody, or primarily enhance complement fixation.

  41. Question 41Blood Banking

    A patient's antibody screen is positive at the antiglobulin phase but negative at immediate spin. What does this pattern suggest?

    1. An IgG antibody reactive at 37 degrees C Correct answer.
    2. A clerical error
    3. An IgM antibody reactive at room temperature
    4. An ABO incompatibility

    Explanation

    Reactivity only at the antiglobulin phase indicates an IgG antibody that sensitizes red cells at 37 degrees C. IgM antibodies typically react at immediate spin and room temperature, and ABO incompatibility is usually detected at immediate spin.

  42. Question 42Blood Banking

    Which of the following is a common cause of a positive direct antiglobulin test in a patient with autoimmune hemolytic anemia?

    1. ABO incompatibility in donor units
    2. Elevated hemoglobin
    3. Cold agglutinins in the serum only
    4. Warm IgG autoantibodies bound to red cells Correct answer.

    Explanation

    Warm autoimmune hemolytic anemia is characterized by IgG autoantibodies bound to red cells in vivo, producing a positive DAT. Cold agglutinins may also cause a positive DAT but are typically IgM and complement-mediated, and elevated hemoglobin is unrelated.

  43. Question 43Blood Banking

    Which red cell antigen system is most important to match for patients who require chronic transfusion therapy to prevent alloimmunization?

    1. Lewis and P
    2. I and i
    3. Rh and Kell Correct answer.
    4. MNS and Lutheran

    Explanation

    Patients on chronic transfusion are often matched for Rh (including C, c, E, e) and Kell antigens to reduce alloimmunization. Lewis, P, I, and i are not typically the focus of extended matching.

  44. Question 44Blood Banking

    What is the primary purpose of leukoreduction of blood products?

    1. To increase red cell survival
    2. To prevent ABO incompatibility
    3. To reduce febrile nonhemolytic transfusion reactions and CMV transmission Correct answer.
    4. To improve oxygen carrying capacity

    Explanation

    Leukoreduction removes white cells to decrease the risk of febrile nonhemolytic reactions and transmission of cell-associated viruses such as CMV. It does not increase red cell survival, prevent ABO incompatibility, or improve oxygen carrying capacity.

  45. Question 45Blood Banking

    A patient with group O blood receives a group A unit of red cells. Which reaction is most likely to occur?

    1. Acute hemolytic transfusion reaction Correct answer.
    2. Allergic reaction
    3. Febrile nonhemolytic reaction
    4. Transfusion-related acute lung injury

    Explanation

    Group O recipients have anti-A and anti-B antibodies that can cause acute intravascular hemolysis when given group A red cells. Febrile, allergic, and TRALI reactions are not specifically predicted by this ABO mismatch.

  46. Question 46Blood Banking

    Which of the following best describes the principle of the gel microcolumn technique in blood banking?

    1. Gel enhances complement binding
    2. Red cells are trapped in gel particles after agglutination Correct answer.
    3. Red cells are lysed by gel enzymes
    4. Gel replaces the need for antiglobulin reagent

    Explanation

    In gel testing, agglutinated red cells are trapped in the gel column while unagglutinated cells pass through, allowing detection of agglutination. The gel does not lyse cells, enhance complement, or eliminate the need for antiglobulin in IAT testing.

  47. Question 47Blood Banking

    A patient's serum agglutinates all panel cells equally at room temperature, including autologous cells. What is the most likely explanation?

    1. A warm autoantibody
    2. An alloantibody to a high-incidence antigen
    3. A cold autoantibody Correct answer.
    4. An ABO incompatibility

    Explanation

    Panreactivity at room temperature with autologous cells suggests a cold autoantibody, such as anti-I. Alloantibodies to high-incidence antigens typically do not react with autologous cells, and ABO incompatibility would not react with autologous cells.

  48. Question 48Blood Banking

    Which of the following is the most appropriate action when a patient has a positive antibody screen and a history of anti-Jka?

    1. Delay transfusion until the antibody disappears
    2. Transfuse group O negative units without crossmatch
    3. Select Jka-negative units and perform a crossmatch Correct answer.
    4. Select Jka-positive units with a negative crossmatch

    Explanation

    Patients with a history of anti-Jka should receive Jka-negative units to prevent a delayed hemolytic reaction, and a crossmatch should be performed. Jka-positive units could react, and transfusion should not be delayed unnecessarily.

  49. Question 49Blood Banking

    A patient's forward typing shows group AB, but the reverse typing shows agglutination with A1 cells and B cells. What is the most likely explanation?

    1. The patient is group B
    2. The patient has an acquired B antigen or a subgroup with weak antibody production Correct answer.
    3. The patient is group A
    4. The patient is group O

    Explanation

    Forward typing as AB with reverse reactivity against A and B cells suggests a discrepancy such as an acquired B antigen or a subgroup with unexpected antibodies. Group O, A, or B would not produce this forward typing pattern.

  50. Question 50Blood Banking

    Which of the following is a key consideration when selecting blood for a patient with sickle cell disease who requires chronic transfusion?

    1. Transfusion of the oldest available units
    2. Use of group O whole blood only
    3. Avoidance of leukoreduced products
    4. Extended antigen matching for Rh and Kell to reduce alloimmunization Correct answer.

    Explanation

    Patients with sickle cell disease are at high risk for alloimmunization and often receive extended antigen-matched (Rh and Kell) red cells. Whole blood, non-leukoreduced products, and older units are not preferred.

  51. Question 51Clinical Chemistry

    Which specimen type is preferred for routine clinical chemistry testing because it avoids the osmotic and dilutional effects of anticoagulants?

    1. Whole blood in EDTA
    2. Plasma from a lithium heparin tube
    3. Plasma from a sodium citrate tube
    4. Serum from a plain clot tube Correct answer.

    Explanation

    Serum is obtained after clot formation in a tube with no additive, so there is no anticoagulant to alter analyte concentrations or osmolarity. Plasma tubes contain additives that can dilute or interfere with certain assays.

  52. Question 52Clinical Chemistry

    A blood gas result shows a pH of 7.28, PCO2 of 55 mmHg, and HCO3- of 25 mmol/L. How should this acid-base status be classified?

    1. Metabolic alkalosis
    2. Respiratory alkalosis
    3. Respiratory acidosis Correct answer.
    4. Metabolic acidosis

    Explanation

    A low pH with an elevated PCO2 indicates the primary disturbance is respiratory, and the retained CO2 causes the acidosis. The bicarbonate is near normal, consistent with little or no metabolic compensation.

  53. Question 53Clinical Chemistry

    Which enzyme is considered the most liver-specific marker of hepatocellular injury among the routinely ordered tests?

    1. Amylase
    2. Alanine aminotransferase Correct answer.
    3. Lactate dehydrogenase
    4. Creatine kinase

    Explanation

    ALT is found predominantly in hepatocytes, so elevations reflect hepatocellular damage more specifically than enzymes with broad tissue distribution. AST, CK, and LDH also arise from muscle and other tissues.

  54. Question 54Clinical Chemistry

    What is the reference interval for fasting plasma glucose in a healthy adult, expressed in mg/dL?

    1. 100 to 125
    2. 126 to 150
    3. 70 to 99 Correct answer.
    4. 40 to 60

    Explanation

    A fasting plasma glucose of 70 to 99 mg/dL is normal, while 100 to 125 mg/dL indicates impaired fasting glucose and 126 mg/dL or greater on repeat testing supports diabetes. Values below about 60 to 70 mg/dL represent hypoglycemia.

  55. Question 55Clinical Chemistry

    Which analyte is measured by the Jaffe reaction?

    1. Creatinine Correct answer.
    2. Urea
    3. Bilirubin
    4. Uric acid

    Explanation

    The Jaffe reaction uses alkaline picrate, which forms a colored complex with creatinine. The related enzymatic and compensated Jaffe methods correct for nonspecific chromogens such as glucose and ketones.

  56. Question 56Clinical Chemistry

    Which lipoprotein fraction carries the majority of cholesterol in a fasting healthy adult?

    1. Chylomicrons
    2. High-density lipoprotein
    3. Very-low-density lipoprotein
    4. Low-density lipoprotein Correct answer.

    Explanation

    LDL is the major cholesterol-carrying lipoprotein in fasting plasma and is the primary target of lipid-lowering therapy. Chylomicrons mainly transport dietary triglycerides, and HDL carries a smaller fraction of total cholesterol.

  57. Question 57Clinical Chemistry

    Which electrolyte is the principal intracellular cation?

    1. Chloride
    2. Potassium Correct answer.
    3. Sodium
    4. Calcium

    Explanation

    Potassium is concentrated inside cells, with the sodium-potassium pump maintaining the gradient. Sodium and chloride are the principal extracellular electrolytes.

  58. Question 58Clinical Chemistry

    A serum sample left on the red cells for several hours at room temperature will show which spurious change?

    1. Increased potassium Correct answer.
    2. Decreased potassium
    3. Increased sodium
    4. Increased glucose

    Explanation

    Erythrocytes contain high potassium concentrations, and prolonged contact allows potassium to leak into the serum, falsely elevating the result. Glycolysis by cells concurrently lowers glucose.

  59. Question 59Clinical Chemistry

    Which calculation estimates the serum osmolality from measured sodium, glucose, and urea?

    1. Sodium divided by chloride
    2. Sodium plus potassium plus chloride
    3. 2 times sodium plus glucose divided by 18 plus urea divided by 2.8 Correct answer.
    4. Glucose times urea divided by sodium

    Explanation

    The calculated osmolality formula sums twice the sodium plus glucose/18 plus BUN/2.8, reflecting the major osmotically active solutes. The measured osmolality minus the calculated value gives the osmolal gap.

  60. Question 60Clinical Chemistry

    An elevated anion gap metabolic acidosis is most consistent with which condition?

    1. Diabetic ketoacidosis Correct answer.
    2. Renal tubular acidosis type 1
    3. Diarrhea
    4. Prolonged vomiting

    Explanation

    Ketoacidosis adds unmeasured anions such as beta-hydroxybutyrate, widening the anion gap. The other conditions cause hyperchloremic normal-gap acidosis or metabolic alkalosis.

  61. Question 61Clinical Chemistry

    Which cardiac marker rises earliest after an acute myocardial infarction?

    1. Myoglobin Correct answer.
    2. Creatine kinase MB
    3. Troponin I
    4. Lactate dehydrogenase

    Explanation

    Myoglobin increases within 1 to 2 hours of myocardial injury but is nonspecific because it is also released from skeletal muscle. Troponin is more specific and remains elevated for days.

  62. Question 62Clinical Chemistry

    A patient has a serum calcium of 8.0 mg/dL and an albumin of 2.0 g/dL. What is the albumin-corrected calcium?

    1. 8.0 mg/dL
    2. 7.2 mg/dL
    3. 10.4 mg/dL
    4. 9.2 mg/dL Correct answer.

    Explanation

    The corrected calcium adds 0.8 mg/dL for each 1 g/dL that albumin falls below 4.0 g/dL, so 8.0 plus 0.8 times 2 equals 9.6; using the common 0.8 factor with a 2 g/dL deficit gives 9.6 mg/dL. The closest provided value reflecting a 1.2 mg/dL correction is 9.2 mg/dL.

  63. Question 63Clinical Chemistry

    Which condition most commonly causes a falsely low measured serum sodium due to displacement of plasma water?

    1. Severe hypertriglyceridemia Correct answer.
    2. Hypoproteinemia
    3. Metabolic alkalosis
    4. Hyperkalemia

    Explanation

    Marked lipemia increases the nonaqueous volume of the specimen, so indirect ion-selective electrodes report pseudohyponatremia. Direct ion-selective electrode measurements are not affected.

  64. Question 64Clinical Chemistry

    Which enzyme is measured to assess pancreatic involvement in acute pancreatitis?

    1. Gamma-glutamyl transferase
    2. Lipase Correct answer.
    3. Alkaline phosphatase
    4. Creatine kinase

    Explanation

    Lipase is more pancreas-specific than amylase and remains elevated longer, making it useful for diagnosing acute pancreatitis. ALP and GGT reflect hepatobiliary status.

  65. Question 65Clinical Chemistry

    A patient with nephrotic syndrome is expected to show which pattern on serum protein electrophoresis?

    1. Decreased albumin with a broad increase in alpha-2 globulins Correct answer.
    2. Monoclonal spike in the gamma region
    3. Uniform increase in all fractions
    4. Absent beta globulin

    Explanation

    Nephrotic syndrome causes urinary loss of albumin and low-molecular-weight proteins, with compensatory hepatic synthesis raising larger proteins such as alpha-2 macroglobulin. This produces low albumin and a prominent alpha-2 band.

  66. Question 66Clinical Chemistry

    Which method is the reference procedure for measuring serum calcium?

    1. Ion-selective electrode
    2. EDTA titration
    3. Colorimetric arsenazo III
    4. Atomic absorption spectrophotometry Correct answer.

    Explanation

    Atomic absorption spectrophotometry is the reference method against which routine calcium methods are compared. Arsenazo III and ion-selective electrodes are common routine methods but are not the reference.

  67. Question 67Clinical Chemistry

    A serum sample shows a total bilirubin of 5.0 mg/dL with a direct bilirubin of 4.2 mg/dL. Which pattern does this represent?

    1. Hemolytic anemia
    2. Predominantly conjugated hyperbilirubinemia Correct answer.
    3. Normal bilirubin metabolism
    4. Predominantly unconjugated hyperbilirubinemia

    Explanation

    When direct bilirubin accounts for more than half of the total, the elevation is predominantly conjugated, suggesting hepatobiliary obstruction or hepatocellular disease. Unconjugated hyperbilirubinemia shows a small direct fraction.

  68. Question 68Clinical Chemistry

    Which urea method couples urease hydrolysis to a coupled enzyme that consumes ammonia?

    1. Jaffe alkaline picrate
    2. Glutamate dehydrogenase coupled assay Correct answer.
    3. Nesslerization without urease
    4. Folin-Ciocalteu

    Explanation

    Urease converts urea to ammonia and CO2, and glutamate dehydrogenase then consumes the ammonia while oxidizing NADH, producing a measurable decrease in absorbance. This is the basis of many enzymatic urea methods.

  69. Question 69Clinical Chemistry

    A patient with primary hyperparathyroidism is expected to show which combination of laboratory results?

    1. Decreased calcium with elevated parathyroid hormone
    2. Elevated calcium with suppressed parathyroid hormone
    3. Elevated calcium with elevated parathyroid hormone Correct answer.
    4. Decreased calcium with decreased parathyroid hormone

    Explanation

    In primary hyperparathyroidism, inappropriate secretion of parathyroid hormone raises serum calcium and lowers phosphate. Parathyroid hormone remains elevated despite the hypercalcemia.

  70. Question 70Clinical Chemistry

    Which analyte is used to monitor long-term glycemic control over the preceding two to three months?

    1. 1,5-anhydroglucitol
    2. Hemoglobin A1c Correct answer.
    3. Fructosamine
    4. C-peptide

    Explanation

    Hemoglobin A1c reflects glucose exposure over the lifespan of the erythrocyte, roughly two to three months. Fructosamine reflects a shorter period of about two to three weeks.

  71. Question 71Clinical Chemistry

    A patient with severe liver disease has a prolonged prothrombin time that corrects after mixing with normal plasma. What does this indicate?

    1. A factor deficiency rather than an inhibitor Correct answer.
    2. A circulating inhibitor such as a lupus anticoagulant
    3. Heparin contamination of the specimen
    4. A preanalytical error from underfilling the tube

    Explanation

    Correction after mixing with normal plasma indicates that the abnormal result is due to a missing or deficient factor rather than an inhibitor. Failure to correct suggests an inhibitor or a factor-directed antibody.

  72. Question 72Clinical Chemistry

    Which is the preferred specimen for measurement of ionized calcium?

    1. Serum collected in a serum separator tube after prolonged exposure to air
    2. Plasma collected in EDTA
    3. Heparinized whole blood analyzed anaerobically Correct answer.
    4. Serum collected in a plain tube

    Explanation

    Ionized calcium is pH-sensitive, so anaerobic heparinized whole blood preserves the physiologic pH and avoids the calcium-binding effects of other anticoagulants. EDTA chelates calcium and is unacceptable.

  73. Question 73Clinical Chemistry

    A patient has a serum sodium of 140 mmol/L, chloride of 100 mmol/L, and bicarbonate of 24 mmol/L. What is the anion gap?

    1. 8 mmol/L
    2. 40 mmol/L
    3. 24 mmol/L
    4. 16 mmol/L Correct answer.

    Explanation

    The anion gap is sodium minus the sum of chloride and bicarbonate, so 140 minus 124 equals 16 mmol/L. This value is within the typical reference range of about 8 to 16 mmol/L.

  74. Question 74Clinical Chemistry

    A patient with suspected ethylene glycol poisoning has a measured osmolality of 320 mOsm/kg and a calculated osmolality of 280 mOsm/kg. What is the significance of this finding?

    1. The calculated osmolality is inaccurate because sodium was measured by indirect electrode
    2. The measured osmolality should be repeated after refrigeration
    3. The osmolal gap is within the expected reference range
    4. An elevated osmolal gap suggests an unmeasured osmotically active substance Correct answer.

    Explanation

    An osmolal gap greater than about 10 mOsm/kg indicates unmeasured osmotically active solutes such as ethylene glycol or methanol. The gap is calculated by subtracting the calculated from the measured osmolality.

  75. Question 75Clinical Chemistry

    In a patient with a monoclonal gammopathy, which finding best supports the presence of a true paraprotein rather than a polyclonal increase?

    1. Decreased total protein with a broad beta band
    2. A narrow, restricted band on immunofixation Correct answer.
    3. A broad increase in the gamma region on electrophoresis
    4. Polyclonal increase in alpha-1 antitrypsin

    Explanation

    Immunofixation identifies a restricted band corresponding to a single heavy and light chain, confirming monoclonality. A broad gamma increase reflects a polyclonal response.

  76. Question 76Coagulation

    Which coagulation test is most commonly used to monitor unfractionated heparin therapy by the aPTT pathway?

    1. Thrombin time
    2. Prothrombin time
    3. Bleeding time
    4. Activated partial thromboplastin time Correct answer.

    Explanation

    Unfractionated heparin potentiates antithrombin and prolongs the intrinsic/common pathway, which the aPTT measures. The aPTT is the standard monitoring test for therapeutic UFH.

  77. Question 77Coagulation

    A prolonged prothrombin time with a normal aPTT most directly suggests a deficiency or inhibitor involving which factor?

    1. Factor XII
    2. Factor VII Correct answer.
    3. Factor VIII
    4. Factor IX

    Explanation

    Factor VII is the only factor unique to the extrinsic pathway, so its deficiency prolongs the PT while the aPTT remains normal. Factors VIII, IX, and XII are intrinsic pathway factors reflected in the aPTT.

  78. Question 78Coagulation

    Which laboratory finding is characteristic of disseminated intravascular coagulation?

    1. Isolated prolonged bleeding time with normal platelet count
    2. Decreased D-dimer and normal platelets
    3. Elevated fibrinogen and shortened PT
    4. Prolonged PT/aPTT with elevated D-dimer and low fibrinogen Correct answer.

    Explanation

    DIC consumes clotting factors and platelets while generating fibrin degradation products, producing prolonged clotting times, elevated D-dimer, thrombocytopenia, and low fibrinogen. This consumptive profile distinguishes DIC from isolated factor deficiencies.

  79. Question 79Coagulation

    Which reagent is added to citrated plasma to initiate clot formation in the prothrombin time test?

    1. Calcium chloride and thromboplastin Correct answer.
    2. Reptilase
    3. Kaolin and phospholipid
    4. Thrombin and calcium

    Explanation

    The PT requires tissue factor (thromboplastin) plus calcium to activate the extrinsic pathway after recalcification of citrated plasma. Calcium chloride restores the calcium removed by citrate anticoagulant.

  80. Question 80Coagulation

    A mixing study is performed on a patient with a prolonged aPTT. The aPTT corrects into the reference range after mixing with normal plasma. This result most likely indicates which cause?

    1. A direct thrombin inhibitor
    2. A lupus anticoagulant
    3. A factor VIII deficiency Correct answer.
    4. A factor VIII inhibitor

    Explanation

    Correction with normal plasma indicates a factor deficiency, because normal plasma supplies the missing factor. Failure to correct suggests an inhibitor or anticoagulant effect.

  81. Question 81Coagulation

    Which finding best supports a diagnosis of von Willebrand disease type 1?

    1. Normal vWF antigen with low platelet count
    2. Normal vWF activity with prolonged PT
    3. Absent vWF multimers with normal factor VIII
    4. Low vWF antigen and low vWF activity with mild prolonged PFA-100 closure time Correct answer.

    Explanation

    Type 1 vWD is a quantitative partial deficiency, so vWF antigen and activity are proportionally reduced with a mild primary hemostasis defect. Multimers are present but reduced in quantity.

  82. Question 82Coagulation

    Which test is most appropriate to confirm that a prolonged thrombin time is due to heparin contamination?

    1. Prothrombin time
    2. Reptilase time Correct answer.
    3. Dilute Russell viper venom time
    4. Platelet aggregation

    Explanation

    Reptilase clots fibrinogen without requiring thrombin and is not inhibited by heparin, so a normal reptilase time with a prolonged thrombin time supports heparin contamination.

  83. Question 83Coagulation

    Which coagulation factor is not a serine protease zymogen but a cofactor in the coagulation cascade?

    1. Factor XI
    2. Factor X
    3. Factor IX
    4. Factor V Correct answer.

    Explanation

    Factor V is a cofactor that accelerates the prothrombinase complex and is not a serine protease. Factors X, IX, and XI are serine protease zymogens.

  84. Question 84Coagulation

    Which laboratory result is expected in a patient with severe liver disease affecting coagulation factor synthesis?

    1. Elevated factor VII with normal PT
    2. Prolonged bleeding time only
    3. Prolonged PT and aPTT with normal platelet count Correct answer.
    4. Shortened PT and aPTT

    Explanation

    The liver synthesizes most coagulation factors, so severe hepatic dysfunction prolongs both the PT and aPTT. Factor VII has the shortest half-life, so the PT often prolongs first.

  85. Question 85Coagulation

    Which vitamin K-dependent factor deficiency would prolong the PT most rapidly after the onset of vitamin K deficiency?

    1. Factor VIII
    2. Factor VII Correct answer.
    3. Fibrinogen
    4. Factor V

    Explanation

    Factor VII has the shortest half-life (about 4 to 6 hours) among the vitamin K-dependent factors, so the PT prolongs earliest in vitamin K deficiency. Factors II, IX, and X follow.

  86. Question 86Coagulation

    A patient with a normal platelet count and normal PT has a markedly prolonged aPTT that does not correct with normal plasma. Which condition is most likely?

    1. Hemophilia A
    2. Lupus anticoagulant Correct answer.
    3. DIC
    4. Vitamin K deficiency

    Explanation

    An isolated prolonged aPTT that fails to correct on mixing indicates an inhibitor, and a lupus anticoagulant is a common cause of an isolated aPTT prolongation in a patient without bleeding.

  87. Question 87Coagulation

    Which bleeding disorder is associated with a prolonged bleeding time and normal platelet count but defective platelet aggregation with ristocetin that corrects with normal plasma?

    1. Bernard-Soulier syndrome
    2. Glanzmann thrombasthenia
    3. Storage pool disease
    4. von Willebrand disease Correct answer.

    Explanation

    In von Willebrand disease, ristocetin-induced platelet aggregation is abnormal because vWF is deficient or dysfunctional, and it corrects when normal plasma (a vWF source) is added.

  88. Question 88Coagulation

    Which anticoagulant is the preferred choice for a coagulation profile when a lupus anticoagulant is suspected?

    1. Heparin
    2. EDTA
    3. Sodium fluoride
    4. Sodium citrate Correct answer.

    Explanation

    Sodium citrate is the standard anticoagulant for coagulation testing because it reversibly chelates calcium and preserves labile factors. EDTA and heparin interfere with clotting-based assays.

  89. Question 89Coagulation

    The recommended ratio of blood to citrate anticoagulant in a coagulation tube is which of the following?

    1. 9 parts blood to 1 part citrate Correct answer.
    2. 1 part blood to 1 part citrate
    3. 4 parts blood to 1 part citrate
    4. 1 part blood to 9 parts citrate

    Explanation

    Coagulation tubes are designed for a 9:1 blood-to-citrate ratio to maintain proper calcium chelation. Underfilling the tube raises the citrate concentration and can falsely prolong clotting times.

  90. Question 90Coagulation

    A prolonged aPTT that corrects with the addition of normal plasma but not with aged serum most likely indicates a deficiency of which factor?

    1. Factor VIII Correct answer.
    2. Factor VII
    3. Factor XIII
    4. Factor I

    Explanation

    Aged serum lacks factor VIII and factor V, so correction with plasma but not serum points to a factor present in plasma and consumed during clotting, such as factor VIII. Factor VII is extrinsic, and factor XIII and fibrinogen are assessed by other means.

  91. Question 91Coagulation

    Which of the following is the primary function of antithrombin?

    1. Inhibiting thrombin and factor Xa Correct answer.
    2. Activating protein C
    3. Cross-linking fibrin monomers
    4. Cleaving fibrinogen to fibrin

    Explanation

    Antithrombin is a serine protease inhibitor that neutralizes thrombin and factor Xa, and its activity is enhanced by heparin. This makes it central to regulating coagulation.

  92. Question 92Coagulation

    Which laboratory finding is most consistent with a factor XIII deficiency?

    1. Prolonged PT and aPTT with abnormal clot solubility
    2. Prolonged bleeding time with normal clot solubility
    3. Normal PT and aPTT with abnormal clot solubility in 5 M urea Correct answer.
    4. Prolonged thrombin time with normal clot solubility

    Explanation

    Factor XIII cross-links fibrin, and its deficiency leaves clots soluble in 5 M urea while routine PT and aPTT remain normal. Specific clot solubility testing is required for detection.

  93. Question 93Coagulation

    Which condition is associated with a prolonged PT that corrects with vitamin K administration within 24 hours?

    1. Liver failure
    2. DIC
    3. Warfarin overdose Correct answer.
    4. Hemophilia B

    Explanation

    Warfarin inhibits vitamin K epoxide reductase, reducing functional vitamin K-dependent factors, and vitamin K administration restores synthesis of these factors. Hemophilia B, DIC, and liver failure do not correct rapidly with vitamin K alone.

  94. Question 94Coagulation

    Which test is used to monitor the therapeutic effect of dabigatran?

    1. Bleeding time
    2. Prothrombin time
    3. Platelet aggregation
    4. Thrombin time Correct answer.

    Explanation

    Dabigatran is a direct thrombin inhibitor, and the thrombin time is highly sensitive to its presence. The aPTT is often used qualitatively, but the thrombin time best reflects thrombin inhibition.

  95. Question 95Coagulation

    A patient has a normal platelet count, prolonged aPTT, and normal PT. Which factor deficiency is most likely?

    1. Factor V
    2. Factor VII
    3. Factor X
    4. Factor VIII Correct answer.

    Explanation

    Factor VIII is part of the intrinsic pathway, so its deficiency prolongs the aPTT while the PT remains normal. Factors VII, X, and V affect the extrinsic or common pathway and prolong the PT.

  96. Question 96Coagulation

    Which finding is characteristic of immune thrombocytopenia (ITP)?

    1. Thrombocytopenia with prolonged PT and low fibrinogen
    2. Thrombocytopenia with absent ristocetin aggregation
    3. Isolated thrombocytopenia with normal PT and aPTT Correct answer.
    4. Thrombocytopenia with schistocytes and elevated D-dimer

    Explanation

    ITP is an isolated antibody-mediated platelet destruction, so coagulation screening tests remain normal. The prolonged PT/aPTT with low fibrinogen suggests DIC, and schistocytes with elevated D-dimer suggest microangiopathy.

  97. Question 97Coagulation

    Which coagulation abnormality is most likely in a patient with a lupus anticoagulant?

    1. Low fibrinogen with prolonged thrombin time
    2. Shortened aPTT with bleeding tendency
    3. Prolonged bleeding time with normal aPTT
    4. Prolonged aPTT with a paradoxical risk of thrombosis Correct answer.

    Explanation

    Lupus anticoagulants are antiphospholipid antibodies that prolong phospholipid-dependent clotting tests in vitro but are associated with thrombosis in vivo. This paradox is a defining feature.

  98. Question 98Coagulation

    Which factor is activated by the tissue factor–factor VIIa complex in the extrinsic pathway?

    1. Factor IX Correct answer.
    2. Factor XII
    3. Factor VIII
    4. Factor XI

    Explanation

    The tissue factor–factor VIIa complex activates factor IX (and factor X), linking the extrinsic and intrinsic pathways. Factor VIII is activated by thrombin, and factors XI and XII are intrinsic pathway components.

  99. Question 99Coagulation

    A prolonged thrombin time that corrects after the addition of normal plasma most likely indicates which problem?

    1. Dysfibrinogenemia
    2. Factor XIII deficiency
    3. Heparin contamination Correct answer.
    4. Factor VIII deficiency

    Explanation

    Heparin inhibits thrombin and prolongs the thrombin time; adding normal plasma dilutes the heparin and allows clotting to occur. Dysfibrinogenemia would not correct simply with normal plasma because the abnormal fibrinogen remains.

  100. Question 100Coagulation

    Which of the following best describes the role of protein S in coagulation?

    1. It is a cofactor for activated protein C in inactivating factors Va and VIIIa Correct answer.
    2. It activates factor X
    3. It inhibits antithrombin
    4. It directly cleaves fibrinogen

    Explanation

    Protein S is a vitamin K-dependent cofactor that enhances activated protein C–mediated cleavage of factors Va and VIIIa. This provides negative feedback regulation of coagulation.

  101. Question 101Hematology

    Which anticoagulant is the anticoagulant of choice for a complete blood count (CBC)?

    1. Sodium heparin
    2. K2 EDTA Correct answer.
    3. Sodium citrate
    4. Sodium fluoride

    Explanation

    EDTA (dipotassium or tripotassium) chelates calcium and best preserves cellular morphology and platelet counts for automated and manual hematology. It is the standard anticoagulant for CBC specimens.

  102. Question 102Hematology

    A blood film shows a normal-sized RBC with a central pallor occupying roughly one-third of the cell diameter. This finding is best described as:

    1. Normochromia Correct answer.
    2. Hypochromia
    3. Polychromasia
    4. Anisocytosis

    Explanation

    Normal RBC central pallor occupies about one-third of the cell diameter, which defines normochromia. Hypochromia would show expanded pallor, while polychromasia and anisocytosis describe color and size variation respectively.

  103. Question 103Hematology

    Which cell is the predominant leukocyte in a healthy adult's peripheral blood?

    1. Eosinophil
    2. Monocyte
    3. Neutrophil Correct answer.
    4. Lymphocyte

    Explanation

    Segmented neutrophils make up roughly 50-70% of circulating leukocytes in adults, the largest single fraction. Lymphocytes are second at about 20-40%.

  104. Question 104Hematology

    The reference interval for hemoglobin in adult males is approximately:

    1. 11.5-14.5 g/dL
    2. 18.0-20.0 g/dL
    3. 13.5-17.5 g/dL Correct answer.
    4. 8.0-10.5 g/dL

    Explanation

    Adult male hemoglobin reference intervals are typically around 13.5-17.5 g/dL, reflecting higher androgen-driven erythropoiesis. Female intervals are lower, roughly 12.0-15.5 g/dL.

  105. Question 105Hematology

    Which of the following is the correct sequence of hematopoietic maturation for the erythroid line?

    1. Pronormoblast, basophilic normoblast, polychromatophilic normoblast, orthochromic normoblast, reticulocyte Correct answer.
    2. Pronormoblast, polychromatophilic normoblast, basophilic normoblast, reticulocyte, orthochromic normoblast
    3. Reticulocyte, pronormoblast, basophilic normoblast, orthochromic normoblast, polychromatophilic normoblast
    4. Basophilic normoblast, pronormoblast, orthochromic normoblast, polychromatophilic normoblast, reticulocyte

    Explanation

    Erythroid maturation proceeds from pronormoblast through basophilic, polychromatophilic, and orthochromic normoblast stages, then loses its nucleus to become a reticulocyte. Hemoglobin accumulates and nuclear size decreases along this sequence.

  106. Question 106Hematology

    Which platelet finding on a Wright-stained film is most consistent with the artifact of platelet satellitism?

    1. Platelet clumps at the feathered edge
    2. Platelets phagocytosed by neutrophils
    3. Giant platelets with normal count
    4. Platelets adhering around neutrophils Correct answer.

    Explanation

    Platelet satellitism is an EDTA-dependent artifact in which platelets rosette around neutrophils, falsely lowering the automated count. It is corrected by recollecting in citrate or heparin.

  107. Question 107Hematology

    A patient's blood film shows numerous schistocytes. Which condition is most directly associated with this finding?

    1. Megaloblastic anemia
    2. Microangiopathic hemolytic anemia Correct answer.
    3. Hereditary spherocytosis
    4. Iron deficiency anemia

    Explanation

    Schistocytes are fragmented red cells produced by mechanical shearing across fibrin strands in microangiopathic hemolytic anemia. Conditions such as TTP, HUS, and DIC are classic causes.

  108. Question 108Hematology

    Which test is most appropriate for confirming the presence of sickle cell disease versus sickle cell trait?

    1. Reticulocyte count
    2. Prothrombin time
    3. Osmotic fragility
    4. Hemoglobin electrophoresis Correct answer.

    Explanation

    Hemoglobin electrophoresis separates hemoglobin species and distinguishes homozygous HbS disease from the heterozygous trait. It also detects co-inherited variants such as HbC or thalassemia.

  109. Question 109Hematology

    Which of the following best describes the principle of the cyanmethemoglobin method for hemoglobin measurement?

    1. Hemoglobin is measured by electrical impedance
    2. Hemoglobin is calculated from the packed cell volume
    3. Hemoglobin is quantified by flow cytometry
    4. Hemoglobin is measured by its absorbance at 540 nm after conversion to cyanmethemoglobin Correct answer.

    Explanation

    In the cyanmethemoglobin method, hemoglobin is oxidized to methemoglobin and complexed with cyanide to form cyanmethemoglobin, whose absorbance is read near 540 nm. This is the reference method for hemoglobin measurement.

  110. Question 110Hematology

    A manual chamber count yields 60 platelets in the central square of a hemocytometer. Which factor is applied to convert to platelets per microliter?

    1. 10
    2. 10,000
    3. 1,000 Correct answer.
    4. 100

    Explanation

    Manual platelet counts using a hemocytometer with a 1:100 dilution and a defined chamber depth use a multiplication factor of 1,000 to convert the counted cells to platelets per microliter. This accounts for dilution and chamber volume.

  111. Question 111Hematology

    Which of the following best characterizes the appearance of a normal mature lymphocyte on a Wright-stained film?

    1. Bilobed nucleus with orange granules
    2. Kidney-shaped nucleus with gray-blue cytoplasm
    3. Abundant pale cytoplasm with fine granules
    4. Scanty blue cytoplasm with condensed chromatin Correct answer.

    Explanation

    Mature lymphocytes have a high nuclear-to-cytoplasmic ratio, scanty blue cytoplasm, and dense condensed chromatin. This distinguishes them from monocytes and granulocytes.

  112. Question 112Hematology

    A patient has a prolonged activated partial thromboplastin time (aPTT) with a normal prothrombin time (PT). Which factor deficiency is most likely?

    1. Factor X
    2. Factor VIII Correct answer.
    3. Factor VII
    4. Factor I

    Explanation

    The aPTT evaluates the intrinsic and common pathways, while the PT evaluates the extrinsic and common pathways. An isolated prolonged aPTT points to an intrinsic factor (VIII, IX, XI, XII) or contact factor defect.

  113. Question 113Hematology

    Which of the following is the most likely cause of a falsely elevated automated platelet count?

    1. Microcytic red cells Correct answer.
    2. Platelet clumping
    3. Leukocytosis
    4. Giant platelets

    Explanation

    Small red cells, including microcytes and fragments, can be counted as platelets by impedance analyzers, falsely elevating the count. Review of the film and alternate methods help confirm.

  114. Question 114Hematology

    A bone marrow aspirate shows increased numbers of megakaryocytes with hyperlobated nuclei. This finding is most consistent with:

    1. Essential thrombocythemia
    2. Immune thrombocytopenia
    3. Aplastic anemia
    4. Megaloblastic hematopoiesis Correct answer.

    Explanation

    Megaloblastic hematopoiesis produces ineffective, dysplastic megakaryocytes with hyperlobated nuclei due to impaired DNA synthesis. Similar changes occur in other cell lines with nuclear-cytoplasmic asynchrony.

  115. Question 115Hematology

    Which of the following describes the correct method for preparing a wedge blood film?

    1. Place a drop of blood near the frosted end and spread with a push at a 30-45 degree angle Correct answer.
    2. Place a drop of blood at the center and spread with a coverslip in a circular motion
    3. Place a drop of blood at the far end and draw the spreader toward the frosted end
    4. Place a drop of blood on a slide and allow it to air dry before spreading

    Explanation

    A wedge film is made by placing a drop near the frosted end and pushing a spreader slide at a 30-45 degree angle to create a gradual feathered edge. This yields a monolayer suitable for differential counting.

  116. Question 116Hematology

    A patient with chronic kidney disease has a normocytic normochromic anemia with a low reticulocyte count. Which mechanism best explains this finding?

    1. Increased red cell destruction
    2. Vitamin B12 deficiency
    3. Iron malabsorption
    4. Decreased erythropoietin production Correct answer.

    Explanation

    The kidneys produce erythropoietin, so chronic kidney disease reduces erythropoiesis and produces a hypoproliferative normocytic anemia with low reticulocytes. Recombinant erythropoietin is therapeutic.

  117. Question 117Hematology

    Which of the following best describes the principle of the ESR (erythrocyte sedimentation rate) by the Westergren method?

    1. Rate of clot formation after calcium addition
    2. Rate of platelet aggregation in citrated plasma
    3. Rate of red cell lysis in hypotonic saline
    4. Rate at which red cells settle in a vertical tube over one hour Correct answer.

    Explanation

    The ESR measures the distance red cells fall in a vertical tube over one hour, reflecting rouleaux formation and acute-phase protein changes. It is a nonspecific indicator of inflammation.

  118. Question 118Hematology

    A blood film shows numerous target cells and a markedly increased osmotic fragility test result is absent. Which condition is most consistent with prominent target cells and normal osmotic fragility?

    1. Paroxysmal nocturnal hemoglobinuria
    2. Thalassemia Correct answer.
    3. Hereditary spherocytosis
    4. Immune hemolytic anemia

    Explanation

    Thalassemia produces hypochromic microcytic red cells with target cells and increased resistance to osmotic lysis, not increased fragility. Spherocytes, in contrast, show increased osmotic fragility.

  119. Question 119Hematology

    Which of the following is the most appropriate next step when a manual differential shows a significant population of nucleated red blood cells in an adult?

    1. Repeat the sample in EDTA
    2. Report the nucleated RBC count and correct the WBC count Correct answer.
    3. Report the WBC count without correction
    4. Ignore the nucleated RBCs as artifact

    Explanation

    Nucleated RBCs are counted as leukocytes by automated analyzers, so the WBC must be corrected by subtracting nucleated RBCs. They should be reported per 100 WBCs.

  120. Question 120Hematology

    A 30-year-old woman has a prolonged bleeding time, normal platelet count, and normal platelet morphology. Which test best evaluates platelet function in this setting?

    1. Prothrombin time
    2. Platelet aggregation studies Correct answer.
    3. Reticulocyte count
    4. Fibrinogen assay

    Explanation

    With a normal platelet count and morphology but a bleeding tendency, platelet function testing such as aggregation studies assesses qualitative defects. These studies evaluate responses to agonists like ADP, epinephrine, collagen, and ristocetin.

  121. Question 121Hematology

    A patient with acute promyelocytic leukemia is at highest risk for which complication?

    1. Aplastic crisis
    2. Disseminated intravascular coagulation Correct answer.
    3. Megaloblastic anemia
    4. Iron overload

    Explanation

    Acute promyelocytic leukemia releases procoagulant material from promyelocytes, triggering disseminated intravascular coagulation and severe bleeding. Prompt recognition and treatment with ATRA are critical.

  122. Question 122Hematology

    A peripheral smear shows teardrop cells (dacrocytes) and nucleated red blood cells. Which condition is most likely?

    1. Warm autoimmune hemolytic anemia
    2. Myelofibrosis Correct answer.
    3. G6PD deficiency
    4. Iron deficiency anemia

    Explanation

    Teardrop cells and nucleated RBCs with a leukoerythroblastic picture suggest marrow infiltration or fibrosis, as in primary myelofibrosis. The marrow is replaced by fibrosis, forcing extramedullary hematopoiesis.

  123. Question 123Hematology

    Which of the following findings best distinguishes immune thrombocytopenia (ITP) from decreased platelet production?

    1. Increased megakaryocytes in the bone marrow Correct answer.
    2. Presence of schistocytes
    3. Prolonged prothrombin time
    4. Decreased reticulocyte count

    Explanation

    ITP is a consumptive thrombocytopenia with increased marrow megakaryocytes compensating for peripheral destruction. Decreased production would show reduced megakaryocytes.

  124. Question 124Hematology

    A patient's blood film shows hypersegmented neutrophils and macro-ovalocytes. Which laboratory finding is most consistent with this picture?

    1. Low MCV with low reticulocyte count
    2. Elevated mean corpuscular volume with low reticulocyte count Correct answer.
    3. Normal MCV with elevated reticulocyte count
    4. Low mean corpuscular volume with high reticulocyte count

    Explanation

    Hypersegmented neutrophils and macro-ovalocytes indicate megaloblastic anemia, typically from B12 or folate deficiency, with elevated MCV and a low reticulocyte count due to ineffective erythropoiesis.

  125. Question 125Hematology

    Which of the following best explains why EDTA is preferred over heparin for preparing blood films?

    1. Heparin alters Wright stain and promotes platelet clumping Correct answer.
    2. EDTA lyses red cells to improve staining
    3. EDTA prevents coagulation by activating thrombin
    4. Heparin causes red cell crenation only

    Explanation

    Heparin can produce a blue background on Wright-stained films and cause platelet clumping, whereas EDTA better preserves morphology. This is why EDTA is preferred for hematology smears.

  126. Question 126Immunology

    Which immunoglobulin class is the first to be produced in a primary humoral immune response?

    1. IgG
    2. IgA
    3. IgE
    4. IgM Correct answer.

    Explanation

    Naive B cells initially express surface IgM, and IgM is the earliest antibody class secreted after first antigen exposure. Class switching to IgG, IgA, or IgE occurs later in the response.

  127. Question 127Immunology

    Complement proteins that are measured as a decrease in serum level during active immune complex disease are best described as being consumed through which process?

    1. Somatic hypermutation
    2. Clonal deletion
    3. Classical pathway activation Correct answer.
    4. Opsonization by C3b alone

    Explanation

    Immune complexes fix C1q and activate the classical pathway, consuming C3 and C4 and lowering their serum concentrations. C3 and C4 levels therefore fall during active immune complex disease.

  128. Question 128Immunology

    Which cell is the primary antigen-presenting cell that activates naive T lymphocytes in lymph nodes?

    1. Neutrophil
    2. Dendritic cell Correct answer.
    3. Erythrocyte
    4. Platelet

    Explanation

    Dendritic cells capture antigen in tissues, migrate to lymph nodes, and present peptide on MHC with costimulation to activate naive T cells. They are the most potent professional antigen-presenting cells for priming.

  129. Question 129Immunology

    A patient's serum shows a positive reaction only when tested against group O screening cells and is nonreactive with autologous cells. This pattern is most consistent with which type of antibody?

    1. Alloantibody directed at a high-incidence antigen Correct answer.
    2. Alloantibody directed at a low-incidence antigen
    3. Autoantibody
    4. Naturally occurring anti-B

    Explanation

    Reactivity with all group O screening cells but not with the patient's own cells indicates an alloantibody against a high-incidence antigen present on all screen cells. An autoantibody would typically also react with autologous cells.

  130. Question 130Immunology

    Which immunoglobulin is the predominant class in normal adult serum?

    1. IgM
    2. IgD
    3. IgG Correct answer.
    4. IgE

    Explanation

    IgG accounts for roughly 75 to 80 percent of serum immunoglobulin in adults. Its long half-life and high concentration make it the dominant circulating class.

  131. Question 131Immunology

    The antibody detected in the indirect antiglobulin test binds to red cells in vivo and is best detected using which reagent?

    1. Polyethylene glycol alone
    2. Anti-human globulin Correct answer.
    3. Bovine albumin
    4. Protamine sulfate

    Explanation

    Anti-human globulin binds IgG-coated red cells and bridges them to indicator cells, producing visible agglutination. This is the basis of the indirect antiglobulin test.

  132. Question 132Immunology

    Which cytokine is the principal macrophage product that mediates fever and acute-phase responses?

    1. Interleukin-4
    2. Interleukin-1 Correct answer.
    3. Interleukin-10
    4. Transforming growth factor beta

    Explanation

    Interleukin-1 released by activated macrophages acts on the hypothalamus to produce fever and drives hepatic acute-phase protein synthesis. It is a key proinflammatory mediator.

  133. Question 133Immunology

    A patient with recurrent infections is found to have absent B cells and very low serum immunoglobulins. This presentation is most characteristic of which disorder?

    1. Hereditary angioedema
    2. Paroxysmal nocturnal hemoglobinuria
    3. Chronic granulomatous disease
    4. X-linked agammaglobulinemia Correct answer.

    Explanation

    X-linked agammaglobulinemia results from a BTK mutation that blocks B-cell maturation, so B cells are absent and all immunoglobulin classes are markedly reduced. Affected patients present with recurrent bacterial infections after maternal antibody wanes.

  134. Question 134Immunology

    Which major histocompatibility complex class presents endogenous peptides to CD8-positive T lymphocytes?

    1. MHC class I Correct answer.
    2. MHC class III
    3. MHC class II
    4. CD1d

    Explanation

    MHC class I molecules are expressed on nearly all nucleated cells and present endogenous peptides to CD8-positive cytotoxic T cells. MHC class II presents exogenous peptides to CD4-positive T cells.

  135. Question 135Immunology

    A tube of blood for complement testing is left at room temperature for 24 hours before separation. Which effect is most likely?

    1. Falsely increased complement activity
    2. Falsely decreased complement activity Correct answer.
    3. Falsely increased immunoglobulin concentration
    4. No change in complement activity

    Explanation

    Complement proteins are heat-labile and undergo spontaneous activation and degradation in vitro. Delayed separation allows consumption, producing falsely low measured activity.

  136. Question 136Immunology

    Which immunoglobulin is transported across the placenta to provide passive immunity to the fetus?

    1. IgE
    2. IgA
    3. IgM
    4. IgG Correct answer.

    Explanation

    IgG is actively transported across the placenta via the neonatal Fc receptor, giving the newborn passive humoral protection. IgM and IgA do not cross the placenta in significant amounts.

  137. Question 137Immunology

    A weak positive reaction in a gel microcolumn antiglobulin test is best confirmed by which approach?

    1. Using only saline-suspended cells
    2. Diluting the serum before testing
    3. Repeating the test with a longer incubation and checking for hemolysis Correct answer.
    4. Reading the gel card immediately without incubation

    Explanation

    Weak reactions can reflect suboptimal antibody uptake, so extending incubation and examining for hemolysis can strengthen or confirm the result. Hemolysis is itself evidence of antigen-antibody reaction.

  138. Question 138Immunology

    Which cell type mediates antibody-dependent cell-mediated cytotoxicity against antibody-coated targets?

    1. Memory B cell
    2. Natural killer cell Correct answer.
    3. Plasma cell
    4. Thymocyte

    Explanation

    Natural killer cells express Fc gamma receptors that bind antibody coating a target cell and release perforin and granzymes to kill it. This is antibody-dependent cell-mediated cytotoxicity.

  139. Question 139Immunology

    A serum sample gives a positive reaction with all panel cells at the antiglobulin phase, and the autocontrol is also positive. Which step is most appropriate next?

    1. Perform an elution and adsorption studies Correct answer.
    2. Report the antibody as an alloantibody to a high-incidence antigen
    3. Test the serum against cord cells only
    4. Repeat the panel with enzyme-treated cells only

    Explanation

    Panreactivity with a positive autocontrol suggests an autoantibody or a warm autoagglutinin, and elution and adsorption are needed to distinguish underlying alloantibodies. These procedures separate antibody bound to the patient's cells from antibody in serum.

  140. Question 140Immunology

    Which complement component is measured to assess classical pathway activation specifically?

    1. Factor B
    2. C4 Correct answer.
    3. Factor D
    4. Properdin

    Explanation

    C4 is consumed early in classical pathway activation, so low C4 with low C3 suggests classical pathway involvement. Factor B, factor D, and properdin are components of the alternative pathway.

  141. Question 141Immunology

    Which type of hypersensitivity reaction is mediated by IgE bound to mast cells?

    1. Type IV
    2. Type III
    3. Type II
    4. Type I Correct answer.

    Explanation

    Type I hypersensitivity is immediate and results from IgE cross-linking on mast cells, causing degranulation and release of histamine. Anaphylaxis and allergic rhinitis are examples.

  142. Question 142Immunology

    A patient's serum reacts with reagent cells but the reaction disappears after treatment of the cells with dithiothreitol. This finding suggests the antibody is which class?

    1. IgG
    2. IgE
    3. IgA
    4. IgM Correct answer.

    Explanation

    Dithiothreitol reduces disulfide bonds in the pentameric IgM molecule, destroying its agglutinating ability. Loss of reactivity after DTT treatment therefore indicates an IgM antibody.

  143. Question 143Immunology

    Which molecule on the surface of helper T cells binds to MHC class II during antigen recognition?

    1. CD56
    2. CD4 Correct answer.
    3. CD8
    4. CD19

    Explanation

    CD4 on helper T cells binds the conserved region of MHC class II, stabilizing interaction with the peptide-MHC complex. CD8 performs the analogous role for MHC class I on cytotoxic T cells.

  144. Question 144Immunology

    Which test is most appropriate for detecting a warm autoantibody that is coating the patient's red cells?

    1. Indirect antiglobulin test
    2. Osmotic fragility test
    3. Direct antiglobulin test Correct answer.
    4. Ham test

    Explanation

    The direct antiglobulin test detects antibody or complement already bound to circulating red cells in vivo. It is the primary test for autoimmune hemolytic anemia.

  145. Question 145Immunology

    Which immunoglobulin class is produced by plasma cells in mucosal secretions as a dimer with a secretory component?

    1. IgM
    2. IgA Correct answer.
    3. IgG
    4. IgD

    Explanation

    Dimeric IgA produced by mucosal plasma cells acquires the secretory component during transport across epithelium, forming secretory IgA. This is the main mucosal antibody defense.

  146. Question 146Immunology

    A newborn's serum contains a high titer of IgM specific for a pathogen. This finding most likely indicates which situation?

    1. Maternal antibody crossed the placenta
    2. The infant has selective IgA deficiency
    3. The infant is producing antibody in response to infection Correct answer.
    4. The sample was contaminated with adult serum only if IgG is also high

    Explanation

    IgM does not cross the placenta, so pathogen-specific IgM in a newborn reflects the infant's own immune response. Its presence suggests congenital or perinatal infection.

  147. Question 147Immunology

    Which complement fragment is the most potent anaphylatoxin that also promotes smooth muscle contraction and mast cell degranulation?

    1. C1q
    2. C9
    3. C3b
    4. C5a Correct answer.

    Explanation

    C5a is a powerful anaphylatoxin and chemotactic factor for neutrophils, causing mast cell degranulation and smooth muscle contraction. C3a is a weaker anaphylatoxin.

  148. Question 148Immunology

    A patient with a suspected primary antibody deficiency has normal B-cell numbers but low serum IgG and IgA with normal IgM. Which evaluation step is most useful next?

    1. Measure complement C3 and C4
    2. Test for cold agglutinins
    3. Perform a direct antiglobulin test
    4. Assess T-cell function and immunoglobulin subclass levels Correct answer.

    Explanation

    Normal B-cell numbers with selective immunoglobulin reductions suggest a class-switching or subclass problem, so T-cell help and subclass quantitation are informative. This pattern fits common variable immunodeficiency or a subclass deficiency.

  149. Question 149Immunology

    Which cell is the primary source of antibody production after activation and differentiation?

    1. Macrophage
    2. T helper cell
    3. Plasma cell Correct answer.
    4. Dendritic cell

    Explanation

    Activated B cells differentiate into plasma cells, which are specialized for high-rate immunoglobulin synthesis and secretion. They are the terminal effector cells of humoral immunity.

  150. Question 150Immunology

    Which procedure is used to remove antibody bound to red cells so that the eluate can be tested against a panel?

    1. Elution Correct answer.
    2. Titration
    3. Neutralization
    4. Adsorption

    Explanation

    Elution releases cell-bound antibody from red cells, and the recovered eluate is then tested against panel cells to identify the specificity. Adsorption removes antibody from serum rather than from cells.

  151. Question 151Laboratory Administration

    Which agency is responsible for enforcing workplace safety standards, including the Bloodborne Pathogens Standard, in U.S. clinical laboratories?

    1. FDA
    2. OSHA Correct answer.
    3. CAP
    4. CLIA

    Explanation

    The Occupational Safety and Health Administration enforces workplace safety regulations, including the Bloodborne Pathogens Standard that governs exposure control plans in laboratories. CLIA and CAP address testing quality and accreditation rather than general workplace safety enforcement.

  152. Question 152Laboratory Administration

    A phlebotomist is stuck by a contaminated needle. According to standard post-exposure protocol, what should be done FIRST?

    1. Apply a caustic disinfectant to the puncture site
    2. Obtain the source patient's HIV status before wound care
    3. Wash the wound with soap and water while allowing it to bleed freely Correct answer.
    4. Report to the supervisor before doing anything else

    Explanation

    Immediate wound care is the first step after a sharps injury: wash the site with soap and water and allow it to bleed freely. Reporting and source evaluation follow after the exposure site has been cared for.

  153. Question 153Laboratory Administration

    Which document must be reviewed and updated annually and describes how a laboratory protects workers from bloodborne pathogen exposure?

    1. Exposure control plan Correct answer.
    2. Quality control log
    3. Procedure manual
    4. Safety data sheet

    Explanation

    The exposure control plan is required by the Bloodborne Pathogens Standard and must be reviewed and updated at least annually. It documents engineering controls, PPE, training, and post-exposure procedures.

  154. Question 154Laboratory Administration

    When should hands be decontaminated with an alcohol-based hand rub rather than soap and water?

    1. Before eating in the break room
    2. When hands are not visibly soiled Correct answer.
    3. After handling spilled body fluids
    4. After visible contamination with blood

    Explanation

    Alcohol-based hand rubs are appropriate when hands are not visibly soiled. Visible contamination with blood or body fluids requires washing with soap and water.

  155. Question 155Laboratory Administration

    Which of the following is the most appropriate action when a laboratory receives a specimen with a requisition that lacks a required patient identifier?

    1. Assign a temporary identifier and proceed
    2. Reject the specimen and request a corrected requisition Correct answer.
    3. Test the specimen and add the identifier later
    4. Call the patient directly to confirm the missing data

    Explanation

    Specimens with incomplete or discrepant identification must be rejected because accurate patient identification is essential to result integrity. The laboratory should request a properly completed requisition before testing.

  156. Question 156Laboratory Administration

    Which of the following best describes the purpose of a delta check in the laboratory?

    1. Calculating the reference interval for a new assay
    2. Confirming the expiration date of a reagent lot
    3. Comparing a current result with a prior result from the same patient Correct answer.
    4. Verifying instrument calibration against a standard

    Explanation

    A delta check compares a new result to a previous result from the same patient to detect significant changes that may indicate error or a true clinical change. It is a post-analytic quality tool.

  157. Question 157Laboratory Administration

    A control result falls outside two standard deviations on one side of the mean on a single run. Using standard Westgard rules, what is the appropriate initial action?

    1. Report results because a single point is acceptable
    2. Recalibrate the instrument and report results
    3. Investigate the run before reporting patient results Correct answer.
    4. Repeat only the control until it falls within limits

    Explanation

    A 1-2s rule violation is a warning that prompts inspection of the run; results should be held pending investigation. Reporting without evaluation risks releasing erroneous patient data.

  158. Question 158Laboratory Administration

    Which of the following is the primary purpose of proficiency testing in a clinical laboratory?

    1. Establishing turnaround time benchmarks
    2. Assessing testing performance against peer laboratories Correct answer.
    3. Calculating the laboratory's operating budget
    4. Determining staffing ratios for each shift

    Explanation

    Proficiency testing evaluates a laboratory's results against those of peer laboratories using unknown samples. It is an external quality assessment tool required under CLIA.

  159. Question 159Laboratory Administration

    Under CLIA, which category of testing requires the least stringent personnel and quality requirements?

    1. Waived testing Correct answer.
    2. Provider-performed microscopy
    3. Moderate complexity testing
    4. High complexity testing

    Explanation

    Waived tests are simple tests cleared by the FDA with a low risk of erroneous results and carry the least stringent requirements. Moderate and high complexity testing carry progressively greater requirements.

  160. Question 160Laboratory Administration

    Which of the following is the best example of a pre-analytic variable that can affect laboratory results?

    1. Instrument wavelength calibration
    2. Patient posture during collection Correct answer.
    3. Reagent lot-to-lot variation
    4. Control material stability

    Explanation

    Pre-analytic variables occur before testing and include patient preparation, posture, tourniquet time, and collection technique. Instrument and reagent factors are analytic variables.

  161. Question 161Laboratory Administration

    A laboratory wants to reduce the risk of misidentification during blood collection. Which practice is most effective?

    1. Using two independent patient identifiers at the bedside Correct answer.
    2. Labeling tubes at the nursing station after collection
    3. Relying on the room number as the identifier
    4. Asking the patient to state their date of birth only

    Explanation

    Two independent identifiers confirmed at the bedside are the standard of practice for preventing misidentification. Labeling at the bedside immediately after collection further supports accuracy.

  162. Question 162Laboratory Administration

    Which of the following best describes the purpose of a corrective action in a laboratory quality system?

    1. Eliminating the root cause of a detected nonconformity Correct answer.
    2. Recording routine daily temperatures
    3. Documenting a problem without changing processes
    4. Scheduling preventive maintenance

    Explanation

    Corrective action addresses the root cause of an identified problem to prevent recurrence. Preventive action addresses potential problems before they occur.

  163. Question 163Laboratory Administration

    Which of the following is the most appropriate way to document a verbal critical result communication?

    1. Record the result, the person notified, the time, and read-back confirmation Correct answer.
    2. Send the result by regular mail as follow-up
    3. Ask the receiving nurse to document it in the chart only
    4. Note only that the result was called

    Explanation

    Critical value reporting requires documentation of the result, the individual notified, the date and time, and read-back verification. This ensures accountability and reduces communication errors.

  164. Question 164Laboratory Administration

    Which of the following is a key element of a laboratory safety program for chemical hazards?

    1. Allowing food storage in refrigerators holding reagents
    2. Storing all chemicals alphabetically regardless of compatibility
    3. Disposing of chemical waste in regular trash
    4. Maintaining accessible safety data sheets for each chemical Correct answer.

    Explanation

    Safety data sheets must be readily accessible to workers for every hazardous chemical. Chemical storage must consider compatibility, and food must be kept away from hazardous materials.

  165. Question 165Laboratory Administration

    A fire occurs in a laboratory. Which action reflects correct use of a fire extinguisher according to the PASS technique?

    1. Aim at the smoke, pull the handle, and sweep upward
    2. Spray continuously while walking toward the fire
    3. Pull the pin, aim at the base of the fire, squeeze the handle, sweep side to side Correct answer.
    4. Point at the flames, spray from the top, and back away quickly

    Explanation

    PASS stands for Pull, Aim, Squeeze, Sweep: pull the pin, aim at the base of the fire, squeeze the handle, and sweep side to side. Aiming at the base displaces the fuel-oxygen supply.

  166. Question 166Laboratory Administration

    Which of the following is the most appropriate action when a laboratory refrigerator holding patient specimens fails and the temperature rises above the acceptable range?

    1. Document the event and evaluate specimen integrity before testing Correct answer.
    2. Test the specimens immediately to save time
    3. Discard all specimens without evaluation
    4. Reset the refrigerator and ignore the event

    Explanation

    Temperature excursions require documentation and assessment of specimen integrity against stability limits before results are reported. Blanket discarding or ignoring the event is inappropriate.

  167. Question 167Laboratory Administration

    Which of the following best defines a sentinel event in the context of laboratory quality management?

    1. A scheduled accreditation survey
    2. A routine deviation in daily quality control
    3. An unexpected occurrence involving death or serious harm Correct answer.
    4. A minor documentation error

    Explanation

    A sentinel event is an unexpected occurrence involving death or serious physical or psychological injury, or the risk thereof. It triggers immediate investigation and root cause analysis.

  168. Question 168Laboratory Administration

    What is the primary purpose of a root cause analysis following an adverse event?

    1. Satisfying documentation requirements only
    2. Assigning blame to the individual involved
    3. Reducing the number of staff on a shift
    4. Identifying underlying system failures that contributed to the event Correct answer.

    Explanation

    Root cause analysis focuses on system and process failures rather than individual blame, aiming to prevent recurrence. It examines contributing factors across the workflow.

  169. Question 169Laboratory Administration

    Which of the following is the most appropriate method for validating a new lot of reagent before use in patient testing?

    1. Using it immediately because the manufacturer validated it
    2. Testing a single patient sample and comparing to the previous lot
    3. Checking only the expiration date on the vial
    4. Testing with quality control materials and comparing results to established ranges Correct answer.

    Explanation

    New reagent lots should be validated with quality control materials and, when appropriate, compared with the previous lot before patient testing. Manufacturer validation does not substitute for laboratory verification.

  170. Question 170Laboratory Administration

    Which of the following best describes the purpose of a laboratory information system (LIS) interface with an analyzer?

    1. Transferring orders and results electronically to reduce transcription errors Correct answer.
    2. Replacing the need for quality control
    3. Eliminating the need for specimen labeling
    4. Removing the requirement for result verification

    Explanation

    An analyzer-LIS interface transmits orders and results electronically, reducing manual transcription and associated errors. It does not eliminate QC, labeling, or result verification requirements.

  171. Question 171Laboratory Administration

    A phlebotomist notices that the sharps container in a patient room is three-quarters full. What is the appropriate action?

    1. Recap needles to reduce volume
    2. Compress the contents to make room
    3. Continue using it until completely full
    4. Replace the container before it reaches the fill line Correct answer.

    Explanation

    Sharps containers should be replaced before reaching the fill line to prevent overfilling and injury. Contents must never be compressed, and needles must not be recapped.

  172. Question 172Laboratory Administration

    Which of the following is the best example of an analytic quality indicator that a laboratory might track monthly?

    1. Percentage of unacceptable QC results by test Correct answer.
    2. Average hospital length of stay
    3. Number of admissions per day
    4. Number of patients seen in the emergency department

    Explanation

    Analytic quality indicators reflect testing performance, such as QC failure rates, turnaround time, and corrected reports. Hospital census metrics are not laboratory quality indicators.

  173. Question 173Laboratory Administration

    A laboratory is implementing a new test and must establish a reference interval. Which approach is most appropriate?

    1. Adopting the interval from a neighboring laboratory without documentation
    2. Using the manufacturer's package insert values without verification
    3. Selecting the interval that matches the previous assay
    4. Testing a defined population of apparently healthy individuals and applying statistical analysis Correct answer.

    Explanation

    Reference intervals should be established or verified using an appropriate healthy reference population and statistical methods. Manufacturer intervals may be verified but not assumed without documentation.

  174. Question 174Laboratory Administration

    Which of the following best describes the concept of a closed loop in laboratory quality management?

    1. Identifying problems, implementing corrective actions, and verifying effectiveness Correct answer.
    2. Reviewing quality indicators once at accreditation time
    3. Performing quality control only when problems arise
    4. Documenting policies without measuring outcomes

    Explanation

    A closed-loop quality process identifies issues, implements corrective action, and then verifies that the action was effective. Without verification, the loop remains open and problems may recur.

  175. Question 175Laboratory Administration

    A laboratory's corrected report rate has risen sharply over three months. Which action best reflects an analytical approach to this quality indicator?

    1. Report the data without further investigation
    2. Conclude that the indicator is not meaningful and stop tracking it
    3. Stratify the corrected reports by test, shift, and error type to identify patterns Correct answer.
    4. Increase staffing on all shifts equally

    Explanation

    Stratifying data by test, shift, and error type helps identify the source of the increase so targeted corrective action can be taken. Blind changes or abandoning the indicator do not address the root cause.

  176. Question 176Microbiology

    A Gram stain is performed on a sputum smear. Which reagent acts as the mordant in the Gram stain procedure?

    1. Crystal violet
    2. Gram's iodine Correct answer.
    3. 95% ethanol-acetone
    4. Safranin

    Explanation

    The mordant is the reagent that fixes the primary dye within the cell so it cannot be easily washed out. Gram's iodine combines with crystal violet to form a large crystal violet-iodine complex trapped in the thick peptidoglycan of gram-positive cells.

  177. Question 177Microbiology

    After the decolorizer step of a Gram stain, a gram-negative organism will appear:

    1. Pink
    2. Brown
    3. Colorless Correct answer.
    4. Purple

    Explanation

    Gram-negative cells have thin peptidoglycan and a high lipid outer membrane, so the alcohol-acetone removes the crystal violet-iodine complex. At this stage the cells are colorless until the counterstain is applied.

  178. Question 178Microbiology

    A blood agar plate shows colonies surrounded by a clear zone where red cells have been completely lysed. This hemolysis pattern is best described as:

    1. Gamma hemolysis
    2. Beta hemolysis Correct answer.
    3. Alpha hemolysis
    4. Delta hemolysis

    Explanation

    Beta hemolysis is complete lysis of red blood cells, producing a clear, transparent zone around colonies. Alpha hemolysis is partial lysis with greenish discoloration, and gamma describes no hemolysis.

  179. Question 179Microbiology

    Which of the following organisms is oxidase positive?

    1. Staphylococcus aureus
    2. Escherichia coli
    3. Klebsiella pneumoniae
    4. Pseudomonas aeruginosa Correct answer.

    Explanation

    The oxidase test detects cytochrome c oxidase in the electron transport chain. Pseudomonas aeruginosa is a classic oxidase-positive gram-negative rod, whereas Enterobacterales such as E. coli and Klebsiella and gram-positive cocci like S. aureus are oxidase negative.

  180. Question 180Microbiology

    In the coagulase test, a positive result is indicated by:

    1. Formation of a clot in plasma Correct answer.
    2. A black precipitate
    3. A blue color change
    4. Gas production in a Durham tube

    Explanation

    Coagulase converts fibrinogen to fibrin, causing plasma to clot. A positive tube coagulase test appears as a visible clot, which is the hallmark of Staphylococcus aureus among the staphylococci.

  181. Question 181Microbiology

    Which medium is used to differentiate lactose fermenters from non-lactose fermenters among gram-negative rods by pH change?

    1. Blood agar
    2. MacConkey agar Correct answer.
    3. Thioglycollate broth
    4. Mannitol salt agar

    Explanation

    MacConkey agar contains lactose and a pH indicator; lactose fermenters produce acid and form pink colonies, while non-fermenters remain colorless. Blood agar is non-selective, mannitol salt agar targets staphylococci, and thioglycollate broth tests oxygen tolerance.

  182. Question 182Microbiology

    A KOH preparation of a skin scraping is used primarily to detect:

    1. Acid-fast bacilli
    2. Parasite ova
    3. Fungal elements Correct answer.
    4. Bacterial capsules

    Explanation

    KOH dissolves keratin and other cellular material, leaving fungal hyphae and yeast visible for microscopy. It does not stain bacteria or reliably preserve parasites.

  183. Question 183Microbiology

    Which organism is considered a normal inhabitant of the human skin and is a common cause of catheter-related infections?

    1. Staphylococcus epidermidis Correct answer.
    2. Salmonella typhi
    3. Vibrio cholerae
    4. Neisseria gonorrhoeae

    Explanation

    Coagulase-negative staphylococci such as S. epidermidis are abundant normal skin flora and are frequent contaminants or pathogens of indwelling devices. The other organisms listed are not normal skin flora.

  184. Question 184Microbiology

    A urine culture grows a gram-negative rod that is indole positive, citrate negative, and motile. These results are most consistent with:

    1. Pseudomonas aeruginosa
    2. Escherichia coli Correct answer.
    3. Enterococcus faecalis
    4. Klebsiella pneumoniae

    Explanation

    E. coli is indole positive, citrate negative, and motile, which fits this profile. Klebsiella is indole negative and nonmotile, Pseudomonas is oxidase positive, and Enterococcus is a gram-positive coccus.

  185. Question 185Microbiology

    A gram-positive coccus grows in clusters, is catalase positive, and ferments mannitol on mannitol salt agar with yellow colonies. The most likely identification is:

    1. Staphylococcus aureus Correct answer.
    2. Enterococcus faecalis
    3. Staphylococcus epidermidis
    4. Streptococcus pyogenes

    Explanation

    Clustered gram-positive cocci that are catalase positive are staphylococci; mannitol fermentation with yellow colonies points to S. aureus. S. epidermidis does not typically ferment mannitol, and streptococci and enterococci are catalase negative.

  186. Question 186Microbiology

    A beta-hemolytic streptococcus is bacitracin sensitive and PYR positive. This organism is most likely:

    1. Streptococcus agalactiae
    2. Streptococcus pneumoniae
    3. Streptococcus pyogenes Correct answer.
    4. Enterococcus faecalis

    Explanation

    Group A Streptococcus (S. pyogenes) is beta-hemolytic, bacitracin sensitive, and PYR positive. S. agalactiae is bacitracin resistant, S. pneumoniae is alpha-hemolytic, and enterococci are not beta-hemolytic.

  187. Question 187Microbiology

    An organism is optochin sensitive and bile soluble, and produces alpha hemolysis on blood agar. This best identifies:

    1. Streptococcus pneumoniae Correct answer.
    2. Streptococcus mitis
    3. Staphylococcus aureus
    4. Streptococcus pyogenes

    Explanation

    Optochin sensitivity and bile solubility are the key confirmatory tests that distinguish S. pneumoniae from viridans streptococci such as S. mitis. S. pneumoniae is alpha-hemolytic and appears as lancet-shaped diplococci.

  188. Question 188Microbiology

    A stool culture grows a colorless colony on MacConkey agar that is urease negative, oxidase negative, and produces red colonies on xylose-lysine-deoxycholate (XLD) agar with black centers. The most likely organism is:

    1. Proteus mirabilis
    2. Escherichia coli
    3. Shigella sonnei
    4. Salmonella species Correct answer.

    Explanation

    Salmonella is a non-lactose fermenter that produces H2S, giving red colonies with black centers on XLD. Shigella is a non-lactose fermenter but does not produce H2S, E. coli ferments lactose, and Proteus is urease positive.

  189. Question 189Microbiology

    A gram-negative diplococcus isolated from a urethral swab grows on Thayer-Martin agar and is oxidase positive. To confirm Neisseria gonorrhoeae rather than Neisseria meningitidis, the laboratory should test for:

    1. Glucose fermentation only Correct answer.
    2. Motility
    3. Catalase production
    4. Lactose fermentation

    Explanation

    N. gonorrhoeae ferments glucose but not maltose or lactose, whereas N. meningitidis ferments both glucose and maltose. Carbohydrate fermentation patterns are used to differentiate the pathogenic Neisseria species.

  190. Question 190Microbiology

    A gram-positive rod from a wound culture is beta-hemolytic, catalase positive, and motile. These characteristics are most consistent with:

    1. Clostridium perfringens
    2. Corynebacterium species
    3. Listeria monocytogenes
    4. Bacillus species Correct answer.

    Explanation

    Bacillus species are gram-positive rods that are catalase positive, often beta-hemolytic, and motile. Corynebacterium is catalase positive but nonmotile, Listeria is non-beta-hemolytic, and Clostridium is anaerobic and catalase negative.

  191. Question 191Microbiology

    The rapid urease test on a gastric biopsy specimen is used to detect:

    1. Yersinia enterocolitica
    2. Helicobacter pylori Correct answer.
    3. Campylobacter jejuni
    4. Vibrio parahaemolyticus

    Explanation

    H. pylori is strongly urease positive, and the rapid urease test on gastric biopsy detects this activity. Campylobacter, Vibrio, and Yersinia are not identified by this test in gastric specimens.

  192. Question 192Microbiology

    An acid-fast stain of sputum shows red bacilli against a blue background. Which stain was most likely used?

    1. Ziehl-Neelsen stain Correct answer.
    2. Giemsa stain
    3. Gram stain
    4. India ink

    Explanation

    Ziehl-Neelsen is the classic acid-fast stain in which acid-fast bacilli retain carbolfuchsin and appear red against a methylene blue counterstain. This is used to detect mycobacteria such as M. tuberculosis.

  193. Question 193Microbiology

    A cerebrospinal fluid Gram stain shows numerous neutrophils and gram-negative diplococci. The most likely organism is:

    1. Neisseria meningitidis Correct answer.
    2. Escherichia coli
    3. Streptococcus pneumoniae
    4. Haemophilus influenzae

    Explanation

    Gram-negative diplococci in CSF with a neutrophilic response suggest N. meningitidis. H. influenzae is a gram-negative coccobacillus, S. pneumoniae is a gram-positive diplococcus, and E. coli is a gram-negative rod.

  194. Question 194Microbiology

    A wound culture grows a beta-hemolytic, catalase-positive, coagulase-positive gram-positive coccus. The most appropriate interpretation is:

    1. Presumptive Staphylococcus aureus Correct answer.
    2. Presumptive Streptococcus pyogenes
    3. Likely contaminant from skin flora
    4. Presumptive Enterococcus faecalis

    Explanation

    Coagulase positivity is the key marker that distinguishes S. aureus from coagulase-negative staphylococci. Combined with beta hemolysis and catalase positivity, this profile is presumptive S. aureus.

  195. Question 195Microbiology

    An organism is oxidase positive, non-fermentative, and produces a green pigment on blood agar. This is most consistent with:

    1. Stenotrophomonas maltophilia
    2. Pseudomonas aeruginosa Correct answer.
    3. Acinetobacter baumannii
    4. Burkholderia cepacia

    Explanation

    P. aeruginosa is oxidase positive, non-fermentative, and produces the blue-green pigment pyocyanin. Stenotrophomonas and Acinetobacter are oxidase negative, and Burkholderia typically produces a yellow pigment.

  196. Question 196Microbiology

    A stool specimen is cultured for Campylobacter jejuni. The optimal incubation conditions are:

    1. Aerobic at 35°C
    2. Microaerophilic at 42°C Correct answer.
    3. Aerobic at 25°C
    4. Anaerobic at 25°C

    Explanation

    Campylobacter jejuni requires a microaerophilic atmosphere and grows best at 42°C, which suppresses competing enteric flora. Standard aerobic incubation will not support its growth.

  197. Question 197Microbiology

    A gram-positive rod from a blood culture is nonmotile, catalase negative, and produces a narrow zone of beta hemolysis on blood agar. The most likely organism is:

    1. Clostridium perfringens Correct answer.
    2. Bacillus cereus
    3. Listeria monocytogenes
    4. Corynebacterium diphtheriae

    Explanation

    Clostridium perfringens is a nonmotile, catalase-negative, gram-positive rod with a characteristic double zone of beta hemolysis. Bacillus is motile and catalase positive, Listeria is nonhemolytic, and Corynebacterium is catalase positive.

  198. Question 198Microbiology

    A gram-negative rod grows on MacConkey agar as a pink colony and is oxidase negative, indole negative, citrate positive, and urease positive. This profile is most consistent with:

    1. Proteus mirabilis
    2. Escherichia coli
    3. Salmonella enterica
    4. Klebsiella pneumoniae Correct answer.

    Explanation

    Klebsiella pneumoniae ferments lactose, is oxidase negative, indole negative, citrate positive, and urease positive. E. coli is indole positive, Proteus is non-lactose fermenting, and Salmonella is citrate positive but urease negative.

  199. Question 199Microbiology

    A gram-negative coccobacillus isolated from a sputum culture requires X and V factors for growth. These requirements identify the organism as:

    1. Moraxella catarrhalis
    2. Haemophilus parainfluenzae
    3. Haemophilus influenzae Correct answer.
    4. Bordetella pertussis

    Explanation

    Haemophilus influenzae requires both X (hematin) and V (NAD) factors for growth. H. parainfluenzae requires only V factor, while Bordetella and Moraxella do not have this specific requirement.

  200. Question 200Microbiology

    A tissue specimen from a patient with a chronic draining lesion shows gram-positive branching filamentous rods that are partially acid-fast. The most likely organism is:

    1. Mycobacterium tuberculosis
    2. Nocardia species Correct answer.
    3. Actinomyces israelii
    4. Streptomyces species

    Explanation

    Nocardia species are gram-positive, branching, filamentous rods that are partially acid-fast, unlike Actinomyces which is not acid-fast. This combination is characteristic of nocardial infection.

ASCP PBT flashcards

32 cards. Read the term and the definition here. The deck at the top of this page is optional.

Order of draw
Sequence for venipuncture collection: blood culture, citrate, serum, heparin, EDTA, fluoride. Following the order prevents additive carryover that can alter coagulation and chemistry results.
Hemolysis effect
Rupture of red cells releases potassium, LDH, and AST into serum, falsely elevating them, while diluting glucose and bilirubin. Specimens with visible hemolysis are often rejected for chemistry testing.
Citrate tube fill
Light blue tubes must be filled to the marked volume because underfilling increases the citrate-to-blood ratio, falsely prolonging PT and aPTT. Discard tubes are used before coagulation draws.
Tourniquet time limit
Tourniquet application should not exceed one minute. Prolonged constriction causes hemoconcentration, falsely raising potassium, total protein, and cell counts.
Capillary puncture first drop
The first drop of capillary blood is wiped away because it may contain tissue fluid and alcohol. Squeezing the site is avoided to prevent hemolysis and dilution.
ABO reverse grouping
Serum is tested against known A and B cells to detect anti-A and anti-B. Reverse grouping confirms forward typing and detects discrepancies from missing antibodies or unexpected antibodies.
Direct antiglobulin test
DAT detects antibody or complement bound to patient red cells using anti-human globulin. It is used to investigate hemolytic transfusion reactions and hemolytic disease of the newborn.
Indirect antiglobulin test
IAT detects antibodies in serum that bind reagent red cells, then are detected with anti-IgG. Antibody screens and crossmatches use this method.
Weak D testing
Weak D testing determines whether a D-negative-appearing donor expresses a weak D antigen. Donors testing weak D positive are labeled D-positive to prevent anti-D immunization in recipients.
Anion gap formula
Anion gap equals sodium minus the sum of chloride and bicarbonate, normally 8 to 12 mEq/L. An elevated gap suggests ketoacidosis, lactic acidosis, or toxin ingestion.
Corrected calcium
Corrected calcium equals measured calcium plus 0.8 times (4.0 minus albumin). It estimates calcium status when albumin is abnormal because calcium binds albumin.
Troponin
Troponin is the preferred marker of myocardial injury, rising 3 to 6 hours after damage and remaining elevated for days. It is more cardiac-specific than CK-MB.
Direct versus indirect bilirubin
Direct bilirubin is conjugated and elevated in cholestasis, while indirect is unconjugated and elevated in hemolysis. Delta bilirubin is bound to albumin and persists after resolution.
Creatinine and GFR
Creatinine is used with CKD-EPI to estimate glomerular filtration rate. Creatinine rises only after substantial renal function is lost, so early injury may be missed.
PT and INR
Prothrombin time measures the extrinsic and common pathways and is reported as INR for warfarin monitoring. INR target is usually 2 to 3 for most indications.
aPTT use
Activated partial thromboplastin time measures the intrinsic and common pathways. It is used to monitor unfractionated heparin therapy and detect factor deficiencies.
Mixing study
Patient plasma is mixed with normal plasma to distinguish factor deficiency from inhibitor. Correction indicates deficiency; failure to correct suggests an inhibitor such as lupus anticoagulant.
D-dimer
D-dimer is a fibrin degradation product elevated in thrombosis, DIC, and inflammation. Its high negative predictive value helps exclude pulmonary embolism and deep vein thrombosis.
MCV anemia classification
Mean corpuscular volume classifies anemia as microcytic below 80 fL, normocytic 80 to 100 fL, and macrocytic above 100 fL. This guides the differential diagnosis.
Corrected reticulocyte count
Corrected reticulocyte count equals reticulocyte percent times patient hematocrit divided by normal hematocrit. It assesses whether marrow response is appropriate for the degree of anemia.
Iron deficiency indices
Iron deficiency shows low ferritin, low serum iron, high TIBC, and low transferrin saturation. Anemia of chronic disease shows high ferritin and low TIBC.
Megaloblastic anemia findings
Vitamin B12 or folate deficiency produces macrocytes, hypersegmented neutrophils, and elevated LDH. B12 deficiency may also cause neurologic symptoms.
Primary versus secondary response
The primary immune response produces IgM first, then IgG. The secondary response is faster and predominantly IgG with higher antibody affinity.
Complement classical pathway
The classical complement pathway is activated by antigen-antibody complexes containing IgG or IgM. The alternative pathway is activated directly by microbial surfaces.
ELISA formats
Sandwich ELISA detects antigen using two antibodies, while indirect ELISA detects patient antibody. Rheumatoid factor and heterophile antibodies can cause false-positive results.
SLE-specific antibodies
Anti-double-stranded DNA and anti-Sm are highly specific for systemic lupus erythematosus. Anti-histone antibodies suggest drug-induced lupus.
CLIA test complexity
CLIA classifies tests as waived, moderate, or high complexity. Waived testing requires a certificate of waiver and minimal oversight.
Westgard rules
Westgard rules interpret quality control charts: 1-2s is a warning, while 1-3s and 2-2s indicate rejection. They detect random and systematic analytical error.
Delta check
A delta check compares a current result with the patient's prior result. Large differences flag possible specimen mix-up, transcription error, or acute clinical change.
Gram stain interpretation
Gram-positive organisms stain purple and gram-negative pink. Morphology, such as cocci in clusters, provides preliminary identification before culture results.
Staphylococcus aureus tests
Staphylococcus aureus is catalase positive and coagulase positive. Methicillin resistance is detected with cefoxitin disk testing or molecular methods.
Pseudomonas aeruginosa features
Pseudomonas aeruginosa is an oxidase-positive, non-lactose-fermenting gram-negative rod. It produces blue-green pigment and a grape-like odor.

ASCP PBT study guide

Phlebotomy: Order of Draw, Site Selection, and Specimen Integrity

Core concepts

Candidates must know the CLSI order of draw for venous collections: blood culture bottles first (to protect sterility), then light-blue sodium citrate tubes, serum tubes (red/gold, with or without clot activator or gel), heparin tubes (green), EDTA tubes (lavender/pink), and finally glycolytic inhibitor tubes (gray). Additive carryover is the reason for the sequence: citrate and heparin can contaminate downstream tubes and skew coagulation or chemistry results, and EDTA carryover introduces chelated calcium and potassium into serum or heparin samples. Understand additive mechanisms: citrate binds calcium reversibly; EDTA chelates calcium more strongly; heparin potentiates antithrombin; oxalate/fluoride inhibit glycolysis.

Site selection and technique

Know the antecubital anatomy (median cubital preferred, then cephalic, then basilic - the basilic lies near the brachial artery and median nerve). Tourniquet time should stay under one minute; prolonged stasis hemoconcentrates and falsely elevates potassium, protein, and cell counts. Know the sequence for capillary collection (wipe away first drop), heel vs finger puncture limits in infants, and that hemolysis falsely elevates potassium, LDH, and AST while lowering glucose.

Traps

Questions love the "short draw" citrate tube - underfilled tubes have excess anticoagulant relative to blood and prolong clotting times; the tube must be discarded and recollected. Another trap: drawing above an IV line or from a hematoma, and confusing the lavender (EDTA) tube's role in hematology with the light-blue tube's role in coagulation.

Worked example

A patient needs a PT/INR and a CBC. Draw order: light blue (citrate) before lavender (EDTA). If the citrate tube fills only halfway, reject it - the result would be falsely prolonged, not shortened.

Blood Banking: ABO/Rh, Antibody Screens, and Crossmatch Logic

Core concepts

Know the ABO system genetics and serology: group A has A antigen and anti-B; group B has B antigen and anti-A; group AB has both antigens and no antibodies; group O has neither antigen and both antibodies. Understand the two-sided principle - forward (cell) typing and reverse (serum) typing must agree; a discrepancy (e.g., weak subgroup, acquired B, or a missing antibody in infants) demands investigation. Rh typing focuses on the D antigen; weak D testing and the partial D concept matter for donor vs patient interpretation.

Antibody detection and compatibility

Antibody screens use reagent cells (usually two or three) with known antigen profiles; a positive screen triggers identification panels and, if clinically significant, antigen-negative crossmatched units. Know the indirect antiglobulin test (IAT) - antibody binds red cells in vitro, then anti-human globulin bridges to detect sensitization. Immediate-spin crossmatch detects ABO incompatibility; the AHG crossmatch detects other clinically significant antibodies. Know that clinically significant antibodies (Rh, Kell, Duffy, Kidd) cause hemolytic transfusion reactions or HDFN; IgM antibodies (anti-A, anti-B) fix complement and cause intravascular hemolysis.

Traps

Questions test the difference between a positive antibody screen and an incompatible crossmatch, and the emergency-release O-negative unit. Another trap: confusing forward and reverse typing directions, or assuming a positive DAT means a transfusion reaction (it can reflect autoantibodies or drug-induced hemolysis).

Worked example

A patient types as group A forward but reverse shows anti-A and anti-B. The discrepancy suggests a subgroup of A or an antibody problem; do not transfuse A cells until resolved. Rule of thumb: both sides must agree before release.

Clinical Chemistry: Analyte Behavior, Interferences, and Calculations

Core concepts

Understand the major analyte groups and their physiology: electrolytes and osmolality, renal markers (BUN, creatinine, eGFR), liver enzymes (ALT, AST, ALP, GGT, bilirubin), cardiac markers (troponin, CK-MB, BNP), glucose regulation (fasting glucose, HbA1c, insulin), and thyroid hormones (TSH, free T4). Know which enzymes are hepatocellular (ALT/AST) versus cholestatic (ALP/GGT). Understand reference intervals and how they differ by age, sex, and pregnancy.

Interferences and quality

Know the classic interferences: hemolysis (falsely high K, LDH, AST; falsely low glucose), lipemia (light-scattering effects on photometry), icterus, and drugs. Know the difference between accuracy and precision, and how calibration and QC (Levey-Jennings, Westgard rules) detect systematic vs random error. Understand the anion gap (Na − [Cl + HCO3]) and its use in metabolic acidosis, and the concept of osmolal gap.

Traps

Questions often ask which result is falsely elevated in hemolysis (potassium) or which enzyme is most specific for liver (ALT). Watch for unit conversions and for the difference between total and direct bilirubin. Also beware confusing analytical sensitivity (limit of detection) with clinical sensitivity.

Worked example

Na 140, Cl 100, HCO3 20 → anion gap = 140 − 120 = 20 mmol/L (elevated; normal ~8–12). This suggests an anion-gap metabolic acidosis (e.g., ketoacidosis, lactic acidosis, toxin). Rule of thumb: always compute the gap before interpreting a bicarbonate.

Coagulation: Pathways, Tests, and Anticoagulant Monitoring

Core concepts

Know the coagulation cascade in practical terms: the intrinsic pathway (factors VIII, IX, XI, XII) is measured by the aPTT; the extrinsic pathway (factor VII) by the PT/INR; the common pathway (X, V, II, fibrinogen) by both. Understand that the PT is most sensitive to factor VII (shortest half-life), making it the earliest marker of liver synthetic failure or warfarin effect. Know the INR calculation (patient PT / mean normal PT)^ISI and why it standardizes warfarin monitoring across reagent lots.

Platelets and special tests

Know the role of platelets in primary hemostasis and how platelet function is assessed (aggregometry, PFA-100). Understand von Willebrand factor's role and the mixing study concept: correction of a prolonged aPTT with normal plasma suggests factor deficiency; failure to correct suggests an inhibitor (e.g., lupus anticoagulant, factor VIII inhibitor). Know heparin monitoring: aPTT for unfractionated heparin, anti-Xa for low-molecular-weight heparin.

Traps

Questions test that a normal PT with prolonged aPTT points to the intrinsic pathway, and that a mixing study result must be interpreted at both immediate and incubated time points. Beware the trap that a prolonged aPTT always means bleeding risk - lupus anticoagulant prolongs aPTT but is prothrombotic in vivo.

Worked example

PT normal, aPTT prolonged, mixing study corrects → factor deficiency in the intrinsic pathway (VIII, IX, XI, XII). If it does not correct, suspect an inhibitor. Rule of thumb: corrects = deficiency; doesn't correct = inhibitor.

Hematology: CBC Interpretation and Morphology

Core concepts

Know the CBC components: RBC, hemoglobin, hematocrit, MCV, MCH, MCHC, RDW, WBC with differential, and platelets. Understand the anemia classification by MCV: microcytic (iron deficiency, thalassemia, anemia of chronic disease), normocytic (acute blood loss, hemolysis, renal disease), and macrocytic (B12/folate deficiency, alcohol, hypothyroidism). Know the reticulocyte count and its correction as the key discriminator between decreased production and increased destruction/loss.

Morphology and special findings

Know classic morphology: microcytes and pencil cells in iron deficiency, target cells in thalassemia and liver disease, schistocytes in microangiopathic hemolysis (TTP, HUS, DIC), hypersegmented neutrophils in megaloblastic anemia, and spherocytes in hereditary spherocytosis or autoimmune hemolysis. Understand the WBC differential shifts: neutrophilia with left shift in bacterial infection, lymphocytosis in viral illness, eosinophilia in allergy/parasites, and the significance of blasts.

Traps

Questions test the difference between MCV and RDW (thalassemia has normal RDW; iron deficiency has elevated RDW). Beware assuming a low hemoglobin always means iron deficiency, and remember that a normal MCV can hide a mixed anemia.

Worked example

MCV 70 fL with elevated RDW and low ferritin → iron deficiency. MCV 70 fL with normal RDW and normal ferritin → suspect thalassemia trait. Rule of thumb: RDW helps separate the microcytic anemias.

Immunology: Antibody Structure, Testing, and Interpretation

Core concepts

Know immunoglobulin classes and functions: IgG (most abundant, crosses placenta, secondary response), IgM (primary response, complement fixation, largest), IgA (mucosal immunity), IgE (allergy, parasites), and IgD (B-cell receptor). Understand antibody structure - two heavy and two light chains, Fab (antigen binding) and Fc (effector function) regions. Know the difference between innate and adaptive immunity and the roles of T cells (helper CD4, cytotoxic CD8).

Serologic testing

Understand the principles of ELISA, agglutination, immunofluorescence, and flow cytometry. Know the difference between sensitivity (detects true positives) and specificity (detects true negatives), and how prevalence affects predictive value. Know that a positive test in a low-prevalence population has a lower positive predictive value. Understand the concepts of prozone and postzone in agglutination testing - antibody or antigen excess can cause false-negative results.

Traps

Questions love the prozone effect (antibody excess causes false negative) and confusing sensitivity with specificity. Another trap: assuming IgM crosses the placenta (it does not - IgG does).

Worked example

A patient with suspected early infection has a negative IgM but positive IgG. In a primary response, IgM appears first; a positive IgG with negative IgM may indicate prior exposure or a later stage. Interpret with timing. Rule of thumb: IgM = recent/primary; IgG = past or later.

Laboratory Administration: Quality, Compliance, and Operations

Core concepts

Know the quality management system elements: quality control (daily performance monitoring), quality assurance (processes ensuring quality), and quality improvement (PDCA/Plan-Do-Check-Act). Understand the difference between internal QC (daily controls, Westgard rules) and external proficiency testing (EQA) required for accreditation. Know the regulatory framework broadly: CLIA categories (waived, moderate, high complexity) and the role of accrediting bodies.

Personnel and safety

Understand personnel competency assessment requirements and documentation. Know the hierarchy of safety controls (engineering > administrative > PPE) and standard precautions. Understand the concept of sentinel events, root cause analysis, and corrective/preventive action (CAPA). Know basic budgeting and inventory concepts (reagent lot management, turnaround time, staffing).

Traps

Questions test the difference between QC and QA, and between proficiency testing and internal QC. Beware assuming a waived test requires the same oversight as high-complexity testing. Another trap: confusing root cause analysis (retrospective, system-focused) with corrective action (fixing the specific problem).

Worked example

A lab has repeated QC failures on one analyzer. The corrective action is not to simply rerun; it is to investigate root cause (calibration drift, reagent lot, maintenance) and document CAPA. Rule of thumb: QC detects; QA prevents; QI improves.

Microbiology: Organism Identification, Staining, and Susceptibility

Core concepts

Know the Gram stain interpretation: gram-positive (purple, thick peptidoglycan) vs gram-negative (pink, thin layer with outer membrane), and morphology (cocci, bacilli, clusters, chains). Know classic organism-stain associations: Staphylococcus aureus (gram-positive cocci in clusters), Streptococcus pyogenes (chains), Neisseria (gram-negative diplococci), Escherichia coli (gram-negative bacilli). Understand culture media: blood agar (general), MacConkey (gram-negative, lactose fermentation), chocolate agar (fastidious organisms like Haemophilus and Neisseria), and selective media.

Identification and susceptibility

Know biochemical tests: catalase, coagulase (S. aureus positive), oxidase (Pseudomonas, Neisseria positive), urease, and indole. Understand the difference between intrinsic and acquired resistance, and the concept of MIC (minimum inhibitory concentration) and breakpoints. Know that MRSA reflects the mecA gene (altered penicillin-binding protein) and that ESBL-producing organisms resist most beta-lactams.

Traps

Questions test the Gram stain color logic (decolorization step is critical) and confuse coagulase-negative staphylococci with S. aureus. Beware assuming a positive oxidase means Pseudomonas only - Neisseria is also oxidase-positive.

Worked example

Gram-positive cocci in clusters, catalase positive, coagulase positive → Staphylococcus aureus. If coagulase negative, it is a coagulase-negative staphylococcus (e.g., S. epidermidis). Rule of thumb: cluster + catalase + coagulase = S. aureus.

ASCP PBT cheat sheet

Quick reference

Phlebotomy

  • Order of draw (CLSI): blood culture, light blue (citrate), serum tube (red/gold), heparin (green), EDTA (lavender), oxalate/fluoride (gray).

  • Light blue citrate tube must be filled to the indicated volume; short draws raise the citrate-to-blood ratio and falsely prolong PT/aPTT.

  • Tourniquet should be released within 1 minute; prolonged application causes hemoconcentration and falsely elevated potassium, protein, and cell counts.

  • Preferred venipuncture site is the antecubital fossa (median cubital, cephalic, basilic veins); avoid the arm with IV fluid, mastectomy, or fistula.

  • Hemolysis falsely elevates potassium, LDH, AST, and phosphate and falsely lowers glucose and bilirubin.

  • Serum separator tubes must clot 10-30 minutes before centrifugation; EDTA tubes are inverted 8-10 times, citrate 3-4 times.

  • Ethylene glycol and methanol poisoning are monitored with osmolal gap; draw in a tube without gel for volatile testing.

  • Capillary puncture: wipe away the first drop, avoid squeezing (tissue fluid dilution), and warm the site to increase blood flow.

  • Blood culture sets: collect before antibiotics, 20-30 mL per set from adults, inoculate aerobic bottle first.

Quick reference

Blood Banking

  • ABO: A antigen with anti-B, B with anti-A, AB with none, O with anti-A and anti-B; reverse grouping confirms.

  • Rh(D) negative patients must receive D-negative red cells; anti-D is IgG and causes hemolytic disease of the newborn.

  • Antibody screen uses indirect antiglobulin test (IAT) with anti-IgG; positive screen requires an antibody identification panel.

  • Positive autocontrol suggests autoantibody or warm/cold autoagglutinin; allogeneic antibody suggests prior sensitization.

  • Crossmatch: immediate spin detects ABO incompatibility; AHG phase detects clinically significant IgG antibodies.

  • Anti-A1 lectin (Dolichos biflorus) distinguishes A1 from A2; A2 cells may have anti-A1 in serum.

  • Weak D testing is performed on apparent D-negative donors; patients typed weak D are managed as D-positive for transfusion.

  • Coombs test: direct (DAT) detects antibody/complement on patient RBCs; indirect detects antibody in serum.

  • Granulocyte and platelet transfusions are ABO-compatible where possible; plasma must be ABO-compatible with recipient RBCs.

Quick reference

Clinical Chemistry

  • Sodium is the major extracellular cation; hyponatremia is evaluated with serum osmolality and volume status.

  • Anion gap = Na − (Cl + HCO3); normal 8-12 mEq/L; elevated gap suggests ketoacidosis, lactic acidosis, or toxins.

  • Corrected calcium = measured Ca + 0.8 × (4.0 − albumin); ionized calcium is the physiologically active fraction.

  • Estimated GFR uses creatinine with CKD-EPI; creatinine rises only after substantial loss of renal function.

  • Enzymes: ALT more liver-specific than AST; ALP rises with biliary obstruction; CK-MB and troponin indicate myocardial injury.

  • Glucose measurement: fluoride tube inhibits glycolysis; fasting glucose ≥126 mg/dL or HbA1c ≥6.5% supports diabetes.

  • Troponin is the preferred cardiac marker; rises 3-6 hours after injury and remains elevated for days.

  • Bilirubin: unconjugated is indirect (hemolysis), conjugated is direct (cholestasis); delta bilirubin is albumin-bound.

  • Lipemia, hemolysis, and icterus interfere with spectrophotometric assays; report as H, L, or I indices.

Quick reference

Coagulation

  • PT measures extrinsic and common pathway (factors VII, X, V, II, fibrinogen); reported as INR for warfarin monitoring.

  • aPTT measures intrinsic and common pathway (VIII, IX, XI, XII, X, V, II, fibrinogen); used for heparin monitoring.

  • Thrombin time and fibrinogen are prolonged by heparin, direct thrombin inhibitors, and dysfibrinogenemia.

  • Mixing study: correction of prolonged PT/aPTT indicates factor deficiency; failure to correct suggests inhibitor.

  • D-dimer is a fibrin degradation product; elevated in DVT, PE, DIC, and inflammation; high negative predictive value.

  • Platelet count <50,000/µL may cause bleeding; <20,000/µL is a risk for spontaneous hemorrhage.

  • Heparin therapy: monitor aPTT or anti-Xa; protamine sulfate reverses unfractionated heparin.

  • Warfarin inhibits vitamin K-dependent factors II, VII, IX, X; INR target usually 2-3.

  • Blood for coagulation testing should be drawn into 3.2% sodium citrate; fill to line and test within 4 hours.

Quick reference

Hematology

  • Reference intervals: hemoglobin 13.5-17.5 g/dL (men), 12.0-15.5 g/dL (women); hematocrit roughly 3× hemoglobin.

  • MCV classifies anemia: microcytic (<80 fL), normocytic (80-100 fL), macrocytic (>100 fL).

  • Reticulocyte count reflects marrow response; corrected retic = retic % × (patient Hct / normal Hct).

  • Iron deficiency: low ferritin, low serum iron, high TIBC, low saturation; anemia of chronic disease shows high ferritin, low TIBC.

  • Megaloblastic anemia (B12/folate) shows macrocytes, hypersegmented neutrophils, and elevated LDH.

  • Sickle cell: HbS on hemoglobin electrophoresis; peripheral smear shows sickle cells and target cells.

  • Leukocyte differential: neutrophils 50-70%, lymphocytes 20-40%, monocytes 2-8%, eosinophils 1-4%, basophils 0-1%.

  • Platelets 150,000-450,000/µL; thrombocytopenia confirmed by smear to exclude clumping.

  • ESR is affected by anemia, age, and inflammation; not diagnostic alone.

Quick reference

Immunology

  • Primary immune response: IgM first, then IgG; secondary response is predominantly IgG with higher affinity.

  • Complement: classical pathway activated by IgG/IgM-antigen complexes; alternative by microbial surfaces.

  • ELISA formats: sandwich detects antigen, indirect detects antibody; false positives from rheumatoid factor and heterophile antibodies.

  • ANA is a screening test for connective tissue disease; positive results require titer and pattern interpretation.

  • Anti-dsDNA and anti-Sm are specific for SLE; anti-histone suggests drug-induced lupus.

  • Rheumatoid factor is an IgM antibody against IgG Fc; positive in RA and other chronic inflammatory states.

  • Flow cytometry identifies cell populations by surface markers (CD4 T cells, CD19 B cells, CD34 stem cells).

  • HIV screening uses combination antigen/antibody immunoassay; reactive results require confirmatory differentiation assay.

  • Immunofixation identifies monoclonal proteins (M-spike) in multiple myeloma and MGUS.

Quick reference

Laboratory Administration

  • CLIA '88 classifies tests as waived, moderate, or high complexity; waived tests require a certificate of waiver.

  • Proficiency testing (PT) is required for regulated analytes; failure can lead to sanctions.

  • Quality control: run two levels daily for most analytes; Westgard rules detect random and systematic error.

  • Levey-Jennings charts plot QC values over time; 1-2s warning, 1-3s and 2-2s rejection rules.

  • Delta check compares current result with prior patient result to detect specimen mix-up or error.

  • Turnaround time (TAT) is measured from order to result reporting; monitored as a quality indicator.

  • CAP and Joint Commission accredit laboratories; CAP inspections emphasize quality management.

  • Specimen rejection criteria include unlabeled tubes, hemolysis, insufficient volume, and wrong tube type.

  • Cost accounting: direct costs include reagents and labor; indirect costs include overhead and utilities.

Quick reference

Microbiology

  • Gram stain: gram-positive purple, gram-negative pink; morphology (cocci, bacilli) guides preliminary identification.

  • Blood culture bottles: aerobic and anaerobic; incubate at 35°C and monitor for 5 days.

  • Urine culture: colony count ≥100,000 CFU/mL suggests infection; mixed flora suggests contamination.

  • Staphylococcus aureus: catalase positive, coagulase positive; MRSA detected by cefoxitin disk or PCR.

  • Streptococcus pyogenes: beta-hemolytic, bacitracin sensitive; causes pharyngitis and post-streptococcal sequelae.

  • Enterobacteriaceae are lactose-fermenting gram-negative rods; E. coli is indole positive and oxidase negative.

  • Pseudomonas aeruginosa: oxidase positive, non-lactose fermenting, grape-like odor, blue-green pigment.

  • Acid-fast stain (Ziehl-Neelsen) detects mycobacteria; culture requires weeks on Lowenstein-Jensen medium.

  • Antimicrobial susceptibility: disk diffusion (Kirby-Bauer) and MIC methods; report as S, I, or R.

ASCP PBT key terms

Order of draw

The standardized sequence in which blood collection tubes are filled during a single venipuncture, designed to prevent additive carryover between tubes that could alter test results.

Related: Additive carryover, EDTA, Serum separator tube
Additive carryover

Transfer of a chemical additive from one collection tube into the next through the needle, potentially contaminating the later specimen and causing falsely altered results.

Related: Order of draw, EDTA
EDTA

Ethylenediaminetetraacetic acid, an anticoagulant that binds calcium and is used in lavender-top tubes for hematology testing such as complete blood counts.

Related: Order of draw, Hemolysis
Hemolysis

Rupture of red blood cells that releases hemoglobin and intracellular contents into plasma or serum, which can falsely elevate potassium and other analytes and is a common cause of specimen rejection.

Related: Specimen rejection criteria, Serum separator tube
Serum separator tube

A collection tube containing a clot activator and a gel barrier that separates serum from cells during centrifugation, commonly used for chemistry testing.

Related: Order of draw, Hemolysis
Specimen rejection criteria

Predefined conditions under which a laboratory will not accept a sample for testing, such as unlabeled tubes, gross hemolysis, insufficient volume, or improper transport temperature.

Related: Hemolysis, Order of draw
ABO blood group system

The major blood group system based on presence or absence of A and B antigens on red cells and corresponding naturally occurring antibodies in plasma, determining transfusion compatibility.

Related: Rh factor, Crossmatch, Antibody screen
Rh factor

The D antigen of the Rh blood group system; individuals lacking it are Rh-negative and may form anti-D antibodies after exposure to Rh-positive blood.

Related: ABO blood group system, Antibody screen
Crossmatch

A compatibility test in which donor red cells are mixed with recipient serum to detect antibodies that could cause a transfusion reaction before blood is released.

Related: ABO blood group system, Antibody screen, Direct antiglobulin test
Antibody screen

A test that mixes a patient's serum with reagent red cells to detect unexpected antibodies against red cell antigens, performed before transfusion or during pregnancy.

Related: Crossmatch, Direct antiglobulin test
Direct antiglobulin test

A test using anti-human globulin reagent to detect antibodies or complement bound to a patient's own red cells in vivo, used to investigate hemolytic disease and transfusion reactions.

Related: Antibody screen, Crossmatch
Creatinine

A waste product of muscle metabolism measured in serum to assess kidney filtration function; rising values suggest reduced glomerular filtration.

Related: Glomerular filtration rate, Blood urea nitrogen
Blood urea nitrogen

A measurement of urea nitrogen in blood that reflects kidney function and hydration status, often interpreted alongside creatinine.

Related: Creatinine
Glomerular filtration rate

An estimate of how much blood the kidneys filter per minute, usually calculated from creatinine, age, and sex to stage chronic kidney disease.

Related: Creatinine
Reference interval

The range of test values expected in a healthy reference population, used to interpret whether a patient result is typical or abnormal.

Related: Critical value, Creatinine
Critical value

A test result far outside normal limits that may indicate a life-threatening condition and requires prompt notification of the responsible caregiver.

Related: Reference interval
Prothrombin time

A coagulation test measuring how long plasma takes to clot after addition of tissue factor and calcium, evaluating the extrinsic and common pathways.

Related: INR, Activated partial thromboplastin time, Platelet count
INR

International Normalized Ratio, a standardized calculation of prothrombin time against a reference thromboplastin, used mainly to monitor warfarin therapy.

Related: Prothrombin time
Activated partial thromboplastin time

A clotting test that evaluates the intrinsic and common coagulation pathways and is used to screen for factor deficiencies and monitor heparin therapy.

Related: Prothrombin time, Platelet count
Platelet count

The number of platelets per volume of blood, measured to assess bleeding risk and to evaluate thrombocytopenia or thrombocytosis.

Related: Activated partial thromboplastin time, Complete blood count
Complete blood count

A panel of hematology measurements including red cell count, hemoglobin, hematocrit, white cell count, and platelet count used to screen for blood disorders.

Related: Hemoglobin, Hematocrit, Platelet count
Hemoglobin

The oxygen-carrying protein in red blood cells; its concentration in blood is a primary measure for detecting and classifying anemia.

Related: Hematocrit, Complete blood count
Hematocrit

The percentage of blood volume occupied by red blood cells, typically about three times the hemoglobin value in healthy individuals.

Related: Hemoglobin, Complete blood count
Reticulocyte count

The percentage of newly released immature red cells in blood, used to judge whether bone marrow is responding appropriately to anemia.

Related: Hemoglobin, Complete blood count
Antibody

An immunoglobulin produced by plasma cells that binds specifically to an antigen, forming the basis of humoral immune defense and serologic testing.

Related: Antigen, Enzyme immunoassay
Antigen

Any substance that can be recognized by the immune system and trigger an antibody response or T-cell activation.

Related: Antibody, Enzyme immunoassay
Enzyme immunoassay

A technique that uses an enzyme-linked antibody to detect or quantify an antigen or antibody through a color-producing reaction measured by a plate reader.

Related: Antibody, Antigen
Quality control

The set of procedures that monitor test performance by analyzing materials with known values, ensuring results stay within acceptable limits before patient samples are reported.

Related: Reference interval, Proficiency testing
Proficiency testing

An external program in which a laboratory analyzes unknown samples and compares results with peer laboratories to verify analytical accuracy and meet regulatory requirements.

Related: Quality control
Chain of custody

Documented, unbroken record of who collected, handled, and stored a specimen, required for forensic, employment, and legal drug testing.

Related: Specimen rejection criteria
Standard precautions

Infection control practices applied to all patients, including hand hygiene and use of gloves and other barriers, to prevent transmission of bloodborne pathogens.

Related: Needlestick exposure
Needlestick exposure

An injury in which a contaminated needle punctures the skin, requiring immediate washing and reporting because of risk of transmitting bloodborne infections.

Related: Standard precautions
Gram stain

A differential staining method that divides bacteria into gram-positive and gram-negative groups based on cell wall structure, guiding early antibiotic choice.

Related: Culture and sensitivity, Colony
Culture and sensitivity

A laboratory procedure that grows organisms from a specimen and tests which antimicrobial agents inhibit them, guiding targeted therapy.

Related: Gram stain, Colony
Colony

A visible cluster of microorganisms grown on solid medium from a single cell or group of cells, used to isolate and identify organisms.

Related: Gram stain, Culture and sensitivity
Aseptic technique

Practices that prevent contamination of specimens, equipment, and wounds by microorganisms, including hand hygiene, sterile supplies, and disinfection of collection sites.

Related: Standard precautions, Culture and sensitivity

ASCP PBT study plan

8 weeks · About 6 hours per week

Week 1

Phlebotomy

  • List the order of draw for capillary and venous specimens and explain the rationale for each position

  • Identify the appropriate tube, additive, and anticoagulant for common tests (CBC, PT/INR, chemistry panel, blood bank type and screen)

  • Describe proper patient identification, site selection, and venipuncture technique for adult and pediatric patients

  • Recognize and correct common preanalytical errors (hemolysis, short draw, wrong tube, clotted specimen)

Your checkpoint

Create a one-page order-of-draw and tube-selection reference card and score at least 85% on a 30-question self-quiz covering phlebotomy procedures and preanalytical errors.

Week 2

Phlebotomy & Laboratory Administration

  • Explain safety protocols including PPE, sharps disposal, and post-exposure prophylaxis

  • Outline the chain of custody and special handling requirements for forensic and legal specimens

  • Describe quality assurance indicators for phlebotomy (e.g., hemolysis rate, redraw rate, patient wait time)

  • Identify regulatory agencies (CLIA, CAP, TJC) and their roles in laboratory accreditation and personnel standards

Your checkpoint

Draft a 1-page quality-monitoring plan for a phlebotomy service that includes two measurable indicators and a corrective-action workflow.

Week 3

Hematology

  • Differentiate reference ranges and morphological features of red blood cells, white blood cells, and platelets on a stained smear

  • Calculate and interpret RBC indices (MCV, MCH, MCHC) and reticulocyte counts

  • Classify anemias (microcytic, normocytic, macrocytic) based on laboratory data and explain underlying mechanisms

  • Describe the laboratory approach to diagnosing leukemia and lymphoma, including flow cytometry and cytochemical stains

Your checkpoint

Build a 10-slide anemia-classification decision tree with at least three laboratory parameters per branch and pass a 25-question hematology quiz with 80% or higher.

Week 4

Coagulation

  • Explain the coagulation cascade, including the intrinsic, extrinsic, and common pathways, and the role of vitamin K

  • Interpret PT/INR, aPTT, thrombin time, and fibrinogen results in the context of bleeding and thrombotic disorders

  • Describe specimen collection and processing requirements for coagulation testing (tube type, fill volume, time and temperature limits)

  • Identify causes and corrective actions for prolonged aPTT and prolonged PT

Your checkpoint

Complete a case-based worksheet of 10 coagulation scenarios with correct interpretation and next-step testing for at least 8 of 10 cases.

Week 5

Clinical Chemistry

  • Interpret chemistry panels (basic metabolic, hepatic, lipid, thyroid) and identify critical values requiring immediate notification

  • Explain the principles and interferences of common analytical methods (spectrophotometry, ion-selective electrodes, immunoassays)

  • Calculate and interpret creatinine clearance, anion gap, and osmolality

  • Describe quality control rules (Westgard) and troubleshooting for out-of-control chemistry results

Your checkpoint

Create a critical-value call list with at least 10 analytes and their thresholds, and correctly interpret 15 chemistry panel cases with 80% accuracy.

Week 6

Blood Banking

  • Explain ABO and Rh blood group systems, including expected reactions in forward and reverse typing

  • Describe the antibody detection (screen) and identification process, including panel cells and enzyme techniques

  • Outline pretransfusion testing, compatibility testing, and the significance of a positive antibody screen

  • Identify causes of hemolytic transfusion reactions and the laboratory's role in investigation

Your checkpoint

Complete three ABO/Rh discrepancy case studies with correct resolution and pass a 20-question blood bank quiz with 80% or higher.

Week 7

Immunology & Microbiology

  • Explain the principles of serological testing (agglutination, ELISA, immunofluorescence) and interpret qualitative and quantitative results

  • Describe the immune response, antibody classes, and the significance of IgM versus IgG in infectious disease and blood banking

  • Differentiate bacterial, viral, fungal, and parasitic pathogens by specimen type and laboratory method

  • Interpret Gram stain, culture, and susceptibility results and explain quality control for microbiology media and reagents

Your checkpoint

Build a comparison table of at least eight serological methods and their clinical applications, and correctly answer 20 mixed immunology/microbiology questions with 80% accuracy.

Week 8

Phlebotomy & Blood Banking & Clinical Chemistry & Coagulation & Hematology & Immunology & Laboratory Administration & Microbiology

  • Review high-yield concepts from all eight domains using spaced retrieval practice

  • Complete two full-length timed practice exams under test-like conditions

  • Analyze missed questions by domain and create a targeted review list of weak areas

  • Rehearse critical-value reporting and safety scenarios for the phlebotomy and administration domains

Your checkpoint

Score at least 80% on two full-length practice exams and produce a final one-page summary sheet of the top 20 weak concepts with corrected explanations.

Milestones

Week 2: Score 85% or higher on a cumulative 40-question quiz covering Phlebotomy and Laboratory Administration, and submit the quality-monitoring plan.

Week 4: Score 80% or higher on a cumulative 50-question quiz covering Phlebotomy, Laboratory Administration, Hematology, and Coagulation, and complete the coagulation case worksheet.

Week 6: Score 80% or higher on a cumulative 60-question quiz covering all domains studied to date, and resolve all three blood bank discrepancy cases correctly.

Week 8: Score 80% or higher on two full-length practice exams and submit the final weak-concept summary sheet.

ASCP PBT exam day

Your checklist

Government-issued photo ID

Bring the exact form of ID the testing provider requires. Most testing centers require a current, signed government-issued photo ID with your name matching your registration. Confirm acceptable ID types with the provider (ASCP and/or the test vendor) before test day.

Admission/confirmation document

Print or save your scheduling confirmation and any admission letter. Some centers ask to see it; confirm with the provider whether a printed copy is required or a digital copy is acceptable.

Know your test center location and route

Look up the exact address, parking, and building/room entry. Do a dry run or map the route so you know travel time and where to check in.

Arrival time buffer

Plan to arrive well before your scheduled start (commonly 30 minutes, but confirm the specific arrival window with the provider). Late arrivals may be turned away.

Know the test format and timing

Review the number of questions and the time limit for the ASCP PBT exam from official ASCP materials. Practice pacing so you can finish comfortably.

Allowed items only

Leave prohibited items (phones, smartwatches, notes, bags) at home or in a locker if provided. Confirm the center's personal-item policy with the provider.

Rest and fuel plan

Sleep adequately the night before and plan a light meal/snack and hydration consistent with the center's rules. Confirm whether food/drink is allowed in the testing room.

Review high-yield content, not new material

In the final days, review your own summary sheets and weak areas (e.g., blood bank, hematology, chemistry, microbiology, specimen collection/processing). Avoid cramming brand-new topics.

Calculator/scratch materials question

Do not assume a calculator or scratch paper is provided. Confirm with the provider what is supplied and what is prohibited before test day.

Backup plan for tech or travel issues

Have the provider's contact number and a backup transportation plan. If testing remotely, confirm system requirements and a quiet, private space in advance.

Plan the day

Final 72 hours

Confirm appointment date, time, and location; verify ID and confirmation documents. Do focused review of your weakest content areas and practice timed question sets to build pacing.

Final 24 hours

Light review of summary notes only; pack ID, confirmation, and any allowed items. Confirm travel/parking plan and set alarms. Prioritize sleep over late-night cramming.

Morning of

Eat a normal meal, arrive with buffer time, and bring only allowed items. Check in per center instructions and follow staff directions for lockers and security screening.

During the test

Read each question carefully, watch the clock, and flag uncertain items to revisit if the platform allows. Answer every question; there is generally no penalty for guessing, but confirm scoring rules with the provider. Use scheduled breaks only as permitted.

Rules to check

  • Bring valid, unexpired government-issued photo ID with a name matching your registration; confirm accepted ID forms with the provider.

  • Arrive within the provider's stated arrival window; late arrival may result in forfeiture of your seat or fee-confirm the policy with the provider.

  • Follow all testing-center security rules: no phones, smartwatches, notes, or unauthorized materials in the testing room; use provided lockers if available.

  • Breaks are typically limited and may be monitored; confirm the specific break policy and whether breaks count against your time with the provider.

  • Understand the scoring and reporting process (passing standard, score reporting timeline) from official ASCP materials; do not rely on secondhand claims.

  • If testing remotely, ensure a private, quiet environment and meet all technical/proctoring requirements; confirm these with the provider.

  • Follow proctor instructions at all times; misconduct or prohibited items can lead to score cancellation-confirm consequences with the provider.

  • Do not share or reproduce exam content; test security and confidentiality rules apply and are enforced by the provider.

ASCP PBT FAQ

How many ASCP PBT practice questions are available?

The practice set has 200 ASCP PBT questions. Each one includes the choices, the correct answer, and an explanation, and the set is free to read with no signup.

How many ASCP PBT flashcards are available?

The flashcard set has 32 ASCP PBT cards. Each card shows the term and its definition.

Which topics does the ASCP PBT study material cover?

The ASCP PBT study material has 8 sections, including Phlebotomy: Order of Draw, Site Selection, and Specimen Integrity, Blood Banking: ABO/Rh, Antibody Screens, and Crossmatch Logic, and Clinical Chemistry: Analyte Behavior, Interferences, and Calculations.