AFOQT overview

  • 199 practice questions
  • 32 flashcards
  • 3 study guide topics
  • 40 key terms

What you'll study

  • Verbal - Verbal Analogies and Word Knowledge20%
  • Quantitative - Arithmetic Reasoning and Math Knowledge20%
  • Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading36%
  • Aviation and Instrument Comprehension16%
  • Physical Science8%

The Air Force Officer Qualifying Test (AFOQT) is the standardized battery the U.S. Air Force uses as part of officer selection and commissioning. It is taken by candidates seeking officer training pathways - including those applying through ROTC, the Academy, and Officer Training School - and it is a selection instrument, not a certification you earn: each candidate's scores are read against the needs of the program they are applying to, and different career fields weigh different composites. The test is computer-administered at an official testing location and runs as a series of separately timed, fixed-order subtests, so you never manage your own clock across the whole battery. Content spans verbal analogies and word knowledge, arithmetic reasoning and math knowledge, spatial and speeded tasks such as block counting, rotated blocks, hidden figures, and table reading, plus aviation and instrument comprehension and a physical science section. A non-cognitive self-report inventory is also administered. Preparation is best treated as skill-building rather than cramming: widen your vocabulary, sharpen mental arithmetic, practice rotating and counting objects in three dimensions, drill rapid table lookup, and get familiar with basic instrument-panel reasoning and physical science fundamentals. Take full-length timed practice to build stamina for the speeded sections. The testing agency publishes current administrative details, and candidates should confirm them there before registering.

Common mistakes

Reading an analogy stem once, then choosing the option that merely 'feels related' to the first word instead of testing the exact relationship in both directions.

Under time pressure the mind grabs surface associations; options are written to tempt with topic similarity rather than the same logical link (cause/effect, part/whole, degree, function).

What to do instead

Before looking at choices, write a short sentence stating the link ('A is a type of B', 'A is the tool used by B'). Insert each option into that same sentence, and reverse the order to confirm the relationship does not break.

Choosing a vocabulary answer because the word looks or sounds like a familiar word, or because one fragment of the definition fits, without checking the whole meaning.

Recognition memory triggers on word shape and partial familiarity; near-miss distractors share roots, prefixes, or connotations with the target.

What to do instead

Define the stem word in your own words before scanning options, then eliminate any choice whose definition differs in connotation, intensity, or part of speech. Keep a running list of missed words with precise definitions and a personal example sentence for each.

Solving arithmetic reasoning by chaining mental calculations and then selecting the first answer that matches an intermediate number.

Working memory overloads when several operations are combined silently; answer choices deliberately include results of stopping halfway or performing the wrong final operation.

What to do instead

Write one equation with labelled units, identify exactly what the question asks for, and only then compute. Before marking, re-read the final question and confirm the answer's units and magnitude are plausible.

Applying a memorised formula or exponent/inequality rule outside the conditions where it is valid, such as distributing a square over a sum or flipping an inequality without multiplying by a negative.

Rules are recalled as strings of symbols without their preconditions; timed math knowledge items reward fast pattern matching over verification.

What to do instead

Maintain a one-page rule sheet that lists each formula together with its conditions, and test every rule by substituting simple numbers before using it on the actual expression.

Counting only the blocks that are visible in the drawing and ignoring the supporting blocks hidden underneath or behind them.

The eye counts what it can see; the item is designed so that upper blocks must rest on unseen lower blocks, and rapid counting feels complete before the hidden structure is considered.

What to do instead

Count by vertical columns or horizontal layers rather than by visible faces. For each column, ask what must exist underneath for the top block to be supported, and record a running tally per column so nothing is counted twice.

Mentally rotating a block figure in two dimensions, or tracking only one coloured face, and then accepting an option that is actually a mirror image.

Human mental rotation is slower and less accurate for three-dimensional objects, and mirror images preserve most surface features, so they look correct at a glance.

What to do instead

Pick the single most asymmetric feature (an L-shaped cut-out, a unique corner) and track its position and handedness through each axis of rotation. Use the rule that a true rotation preserves the clockwise order of three adjacent faces, while a reflection reverses it.

Staring at a hidden-figures item as a whole and waiting for the embedded shape to 'pop out', then spending a disproportionate share of the section on one item.

Global visual search is inefficient when the target is disguised by overlapping lines; fixation is reinforced because the shape often appears just after a long stare, which rewards persistence.

What to do instead

Search feature-by-feature: locate distinctive angles or line lengths of the target, trace candidate segments, and cover parts of the figure to break camouflage. Set a hard time limit per item (for example, 20–30 seconds) and move on, returning only if time remains.

Losing row–column alignment in a table, reading the value from an adjacent row, or using the wrong column header when the table has similar-looking entries.

Dense tables with repeated values and small fonts cause the eye to drift; speeded pacing discourages re-checking the intersection point.

What to do instead

Place a straightedge or finger under the row while moving horizontally to the correct column, read the header aloud, then lift to the cell. Verify by checking that the row label and column label both match the question before recording the answer.

Confusing pitch with bank on an attitude indicator, or interpreting the instrument as showing what the pilot sees rather than the aircraft's actual attitude.

Instrument symbology is learned visually and the horizon bar and pointer move in ways that are easy to invert mentally, especially when the aircraft is climbing or turning.

What to do instead

Memorise fixed conventions: the horizon line tilts to show bank, and the miniature aircraft's nose position relative to the horizon shows pitch. Practise by sketching the instrument for stated attitudes until the mapping is automatic, and always check which end of the pointer represents the aircraft.

Answering physical science items from everyday intuition (heavier objects fall faster, motion requires a constant force) or reporting a numerical answer without checking its units.

Lived experience suggests an Aristotelian picture of motion, and science items are worded to sound like common-sense scenarios; unit slips are easy to miss under time pressure.

What to do instead

Translate each scenario into the relevant law (Newton's second law, conservation of energy, density = mass/volume) before choosing, and carry units through every calculation using dimensional analysis. Reject any option whose units or order of magnitude cannot match the quantity asked for.

Exam requirements can change. Confirm current details with the exam provider.

AFOQT practice

199 questions. Each one lists the choices, the correct answer, and an explanation. With JavaScript, this list opens one question at a time. The checker at the top of this page saves progress in this browser when it is available.

  1. Question 1Verbal - Verbal Analogies and Word Knowledge

    HOT : COLD :: LIGHT : ______

    1. Bright
    2. Heavy
    3. Dark Correct answer.
    4. Soft

    Explanation

    The stem pair consists of opposites: cold is the direct antonym of hot. The same relationship must hold for light, whose opposite in the sense of illumination is dark.

  2. Question 2Verbal - Verbal Analogies and Word Knowledge

    The word CANDID most nearly means:

    1. Wealthy
    2. Frank Correct answer.
    3. Careful
    4. Angry

    Explanation

    Candid describes speech or behavior that is open and straightforward, so frank is the closest match. The other choices name qualities from unrelated categories such as caution, money, and emotion.

  3. Question 3Verbal - Verbal Analogies and Word Knowledge

    AUTHOR : NOVEL :: COMPOSER : ______

    1. Choir
    2. Piano
    3. Violin
    4. Opera Correct answer.

    Explanation

    The stem shows a creator paired with a type of work that person creates: an author writes a novel. A composer creates an opera in the same way.

  4. Question 4Verbal - Verbal Analogies and Word Knowledge

    The word ABUNDANT most nearly means:

    1. Rare
    2. Ample Correct answer.
    3. Hidden
    4. Fragile

    Explanation

    Abundant means existing in large quantity, and ample carries the same sense of being more than enough. The other options describe scarcity, concealment, or breakability instead of quantity.

  5. Question 5Verbal - Verbal Analogies and Word Knowledge

    CHAPTER : BOOK :: VERSE : ______

    1. Poem Correct answer.
    2. Prose
    3. Novel
    4. Page

    Explanation

    The stem is a part-to-whole relationship: a chapter is a division of a book. In the same way, a verse is a division of a poem.

  6. Question 6Verbal - Verbal Analogies and Word Knowledge

    The word BRIEF most nearly means:

    1. Short Correct answer.
    2. Loud
    3. Late
    4. Long

    Explanation

    Brief means lasting only a little time or using few words, which matches short. The remaining choices describe length in the opposite direction, volume, or timing.

  7. Question 7Verbal - Verbal Analogies and Word Knowledge

    PENCIL : WRITE :: KNIFE : ______

    1. Metal
    2. Cut Correct answer.
    3. Sharp
    4. Draw

    Explanation

    The stem pairs a tool with its characteristic function: a pencil is used to write. A knife is used to cut, so the second pair must follow the same tool-and-purpose pattern.

  8. Question 8Verbal - Verbal Analogies and Word Knowledge

    The word RAPID most nearly means:

    1. Steady
    2. Swift Correct answer.
    3. Slow
    4. Careless

    Explanation

    Rapid describes something that moves or happens quickly, and swift carries the same meaning. The other choices refer to low speed, evenness of movement, or lack of care.

  9. Question 9Verbal - Verbal Analogies and Word Knowledge

    OASIS : DESERT :: ISLAND : ______

    1. Harbor
    2. Volcano
    3. Beach
    4. Ocean Correct answer.

    Explanation

    An oasis is a small fertile spot entirely surrounded by desert, so the pair relates a thing to the larger region enclosing it. An island is land entirely surrounded by ocean, which fills the same role.

  10. Question 10Verbal - Verbal Analogies and Word Knowledge

    The word GREGARIOUS most nearly means:

    1. Sociable Correct answer.
    2. Solitary
    3. Aggressive
    4. Timid

    Explanation

    Gregarious describes a person or animal that seeks out the company of others, so sociable is the closest equivalent. The other options describe being alone, hostility, or shyness.

  11. Question 11Verbal - Verbal Analogies and Word Knowledge

    MISER : MONEY :: GLUTTON : ______

    1. Wealth
    2. Sleep
    3. Praise
    4. Food Correct answer.

    Explanation

    A miser is defined by excessive attachment to money, hoarding it far beyond need. A glutton is defined by excessive consumption of food, matching the same person-to-object-of-excess pattern.

  12. Question 12Verbal - Verbal Analogies and Word Knowledge

    The word AMBIGUOUS most nearly means:

    1. Brief
    2. Unclear Correct answer.
    3. Definite
    4. Rapid

    Explanation

    Ambiguous describes something open to more than one interpretation, which makes it unclear. The other choices describe certainty, length, or speed.

  13. Question 13Verbal - Verbal Analogies and Word Knowledge

    THERMOMETER : TEMPERATURE :: BAROMETER : ______

    1. Precipitation
    2. Pressure Correct answer.
    3. Speed
    4. Temperature

    Explanation

    The stem pairs a measuring instrument with the quantity it measures: a thermometer measures temperature. A barometer measures atmospheric pressure, so that is the matching quantity.

  14. Question 14Verbal - Verbal Analogies and Word Knowledge

    The word TENACIOUS most nearly means:

    1. Fragile
    2. Dogged Correct answer.
    3. Silent
    4. Generous

    Explanation

    Tenacious describes someone who holds firmly to a purpose and refuses to give up, which matches dogged. The remaining choices concern breakability, giving, or quietness.

  15. Question 15Verbal - Verbal Analogies and Word Knowledge

    SURGEON : HOSPITAL :: TEACHER : ______

    1. Student
    2. Textbook
    3. School Correct answer.
    4. Library

    Explanation

    The stem pairs a professional with the institution where that professional normally works. A teacher ordinarily works in a school, just as a surgeon works in a hospital.

  16. Question 16Verbal - Verbal Analogies and Word Knowledge

    The word FRUGAL most nearly means:

    1. Cheerful
    2. Rigid
    3. Wasteful
    4. Thrifty Correct answer.

    Explanation

    Frugal describes careful management of resources and avoidance of waste, so thrifty is the closest match. The other options describe extravagance, mood, or inflexibility.

  17. Question 17Verbal - Verbal Analogies and Word Knowledge

    SCULPTOR : CHISEL :: PAINTER : ______

    1. Gallery
    2. Canvas
    3. Palette
    4. Brush Correct answer.

    Explanation

    The stem pairs a craftsperson with the hand tool used to shape the work. A painter uses a brush as the corresponding tool.

  18. Question 18Verbal - Verbal Analogies and Word Knowledge

    The word CENSURE most nearly means:

    1. Praise
    2. Blame Correct answer.
    3. Delay
    4. Measure

    Explanation

    To censure is to express strong disapproval of someone or something, which matches blame. The other choices describe approval, measurement, or postponement.

  19. Question 19Verbal - Verbal Analogies and Word Knowledge

    WARM : SCORCHING :: COOL : ______

    1. Balmy
    2. Windy
    3. Mild
    4. Freezing Correct answer.

    Explanation

    The stem shows a gradation in which the second word names an extreme degree of the first. Freezing is the extreme degree of cool, matching that pattern.

  20. Question 20Verbal - Verbal Analogies and Word Knowledge

    The word EPHEMERAL most nearly means:

    1. Fleeting Correct answer.
    2. Permanent
    3. Eternal
    4. Costly

    Explanation

    Ephemeral describes something that lasts only a very short time, so fleeting is the closest equivalent. The other choices describe permanence or price.

  21. Question 21Verbal - Verbal Analogies and Word Knowledge

    ICONOCLAST : ORTHODOXY :: PACIFIST : ______

    1. Treaty
    2. War Correct answer.
    3. Soldier
    4. Peace

    Explanation

    An iconoclast is defined by attacking accepted beliefs, so the pair links a person to the established thing that person opposes. A pacifist is defined by opposition to war, matching that relationship.

  22. Question 22Verbal - Verbal Analogies and Word Knowledge

    The word LACONIC most nearly means:

    1. Terse Correct answer.
    2. Melancholy
    3. Talkative
    4. Ornate

    Explanation

    Laconic describes speech that is brief and uses very few words, which matches terse. The other choices describe excessive talking, sadness, or elaboration.

  23. Question 23Verbal - Verbal Analogies and Word Knowledge

    OBDURATE : PERSUASION :: INEVITABLE : ______

    1. Repetition
    2. Certainty
    3. Delay
    4. Avoidance Correct answer.

    Explanation

    Obdurate means incapable of being moved by persuasion, so the pair links a quality to the thing it renders impossible. Inevitable means incapable of being avoided, which fits the same pattern.

  24. Question 24Verbal - Verbal Analogies and Word Knowledge

    The word PRAGMATIC most nearly means:

    1. Hesitant
    2. Theoretical
    3. Practical Correct answer.
    4. Idealistic

    Explanation

    Pragmatic describes an approach that deals with matters according to what actually works rather than by abstract principle, so practical is the closest match. The other choices describe visionary aims, abstraction, or indecision.

  25. Question 25Verbal - Verbal Analogies and Word Knowledge

    PRODIGAL : THRIFT :: CRAVEN : ______

    1. Courage Correct answer.
    2. Strength
    3. Prudence
    4. Wealth

    Explanation

    Prodigal describes reckless wastefulness, meaning a lack of thrift, so the pair links a vice to the quality it lacks. Craven means contemptibly fearful, meaning a lack of courage, which completes the pattern.

  26. Question 26Verbal - Verbal Analogies and Word Knowledge

    BEE : HIVE :: BIRD : ______

    1. beak
    2. wing
    3. nest Correct answer.
    4. feather

    Explanation

    The first pair names a creature and the structure it lives in: a bee dwells in a hive. The matching choice must be the structure a bird lives in, which is a nest.

  27. Question 27Verbal - Verbal Analogies and Word Knowledge

    The word TIMID most nearly means:

    1. stern
    2. hasty
    3. shy Correct answer.
    4. bold

    Explanation

    Timid describes a person who lacks confidence and is easily frightened or hesitant. Shy carries the same core sense of reserve and hesitancy. The remaining options describe courage, severity, or speed instead.

  28. Question 28Verbal - Verbal Analogies and Word Knowledge

    PEN : INK :: CANDLE : ______

    1. flame
    2. wax Correct answer.
    3. wick
    4. light

    Explanation

    A pen holds and consumes ink as the substance that makes it function. The matching choice is the substance a candle holds and consumes, which is wax. Flame, light, and wick are products or components rather than the consumed material.

  29. Question 29Verbal - Verbal Analogies and Word Knowledge

    AUDACIOUS : TIMIDITY :: IMPECCABLE : ______

    1. precision
    2. fault Correct answer.
    3. doubt
    4. elegance

    Explanation

    The first pair links a quality to the defect it lacks: an audacious person is free of timidity. Likewise, impeccable means free of fault, so the missing term must be the defect that is absent.

  30. Question 30Verbal - Verbal Analogies and Word Knowledge

    The word VERBOSE most nearly means:

    1. gentle
    2. hesitant
    3. truthful
    4. wordy Correct answer.

    Explanation

    Verbose comes from a root meaning 'word' and describes speech or writing that uses more words than needed. Wordy expresses exactly that excess. The distractors concern honesty, uncertainty, or mildness.

  31. Question 31Verbal - Verbal Analogies and Word Knowledge

    The word INEPT most nearly means:

    1. eager
    2. clumsy Correct answer.
    3. stubborn
    4. sincere

    Explanation

    Inept means lacking skill or competence in doing something, and clumsy captures that awkward lack of proficiency. The other choices describe honesty, enthusiasm, or unwillingness to change, none of which involves skill level.

  32. Question 32Verbal - Verbal Analogies and Word Knowledge

    FRAGILE : SHATTER :: COMBUSTIBLE : ______

    1. glow
    2. burn Correct answer.
    3. rust
    4. melt

    Explanation

    Something fragile breaks with little force, so the pairing is an object and the damaging action it undergoes easily. A combustible material is one that catches fire readily, making 'burn' the fitting parallel.

  33. Question 33Verbal - Verbal Analogies and Word Knowledge

    The word OSTENTATIOUS most nearly means:

    1. humble
    2. generous
    3. suspicious
    4. showy Correct answer.

    Explanation

    Ostentatious describes display intended to attract attention and admiration, so showy is the closest match. The word carries a note of conspicuous display rather than of giving, doubting, or modesty.

  34. Question 34Verbal - Verbal Analogies and Word Knowledge

    DROUGHT : FAMINE :: NEGLIGENCE : ______

    1. safety
    2. delay
    3. precision
    4. accident Correct answer.

    Explanation

    The first pair sets up a cause-and-effect link: a prolonged drought brings about famine. In the same way, negligence in carrying out a duty tends to bring about an accident.

  35. Question 35Verbal - Verbal Analogies and Word Knowledge

    The word MITIGATE most nearly means:

    1. worsen
    2. lessen Correct answer.
    3. measure
    4. delay

    Explanation

    To mitigate is to make something less severe or intense, so lessen is the direct equivalent. The word concerns reduction of force or harm rather than intensification, postponement, or assessment.

  36. Question 36Verbal - Verbal Analogies and Word Knowledge

    TRICKLE : FLOOD :: WHISPER : ______

    1. speech
    2. murmur
    3. silence
    4. scream Correct answer.

    Explanation

    The first pair relates a small, weak version of a flow to an overwhelming version of the same flow. A whisper is a quiet, weak use of the voice, so the matching term is its overwhelming counterpart, a scream.

  37. Question 37Verbal - Verbal Analogies and Word Knowledge

    The word PUSILLANIMOUS most nearly means:

    1. stubborn
    2. generous
    3. cowardly Correct answer.
    4. eloquent

    Explanation

    Pusillanimous derives from roots meaning 'small spirit' and describes a person who is faint-hearted and easily discouraged by danger. Cowardly best captures that lack of courage. The other options concern giving, inflexibility, or speaking ability.

  38. Question 38Verbal - Verbal Analogies and Word Knowledge

    PHILANTHROPIST : BENEFICENCE :: RECLUSE : ______

    1. solitude Correct answer.
    2. kindness
    3. fame
    4. wealth

    Explanation

    The first pair matches a type of person with the quality that defines the type: a philanthropist is characterized by generous giving. A recluse is defined by living apart from others, so the defining quality is solitude.

  39. Question 39Verbal - Verbal Analogies and Word Knowledge

    The word ENERVATE most nearly means:

    1. weaken Correct answer.
    2. frighten
    3. energize
    4. confuse

    Explanation

    Enervate comes from a Latin root meaning 'to cut the sinew' and means to drain strength or vitality. Weaken matches that sense of depletion. Its resemblance to 'energy' misleads many test takers into choosing its opposite.

  40. Question 40Quantitative - Arithmetic Reasoning and Math Knowledge

    A jacket originally priced at $80 is on sale for 25% off. What is the sale price?

    1. $55
    2. $20
    3. $60 Correct answer.
    4. $65

    Explanation

    A 25% discount on $80 equals 0.25 × $80 = $20, and the sale price is the original price minus the discount: $80 − $20 = $60. The discount amount is subtracted from the original price rather than reported as the final price.

  41. Question 41Quantitative - Arithmetic Reasoning and Math Knowledge

    A recipe uses 3/4 cup of sugar per batch. How much sugar is needed for 6 batches?

    1. 4 1/2 cups Correct answer.
    2. 5 cups
    3. 3 3/4 cups
    4. 4 cups

    Explanation

    The amount per batch is multiplied by the number of batches: 3/4 × 6 = 18/4 = 4 1/2 cups. Multiplying, rather than adding, is what scales a per-batch quantity to several batches.

  42. Question 42Quantitative - Arithmetic Reasoning and Math Knowledge

    What is the average (arithmetic mean) of 12, 18, 20, 25, and 30?

    1. 22
    2. 21 Correct answer.
    3. 23
    4. 20

    Explanation

    The mean is the sum of the values divided by the count: 12 + 18 + 20 + 25 + 30 = 105, and 105 ÷ 5 = 21. The mean is not the same as the middle value of the ordered list.

  43. Question 43Quantitative - Arithmetic Reasoning and Math Knowledge

    Evaluate 3 + 4 × 2² − 6.

    1. 25
    2. 13 Correct answer.
    3. 5
    4. 19

    Explanation

    Order of operations requires exponents first, then multiplication, then addition and subtraction from left to right: 2² = 4, so 4 × 4 = 16, and 3 + 16 − 6 = 13.

  44. Question 44Quantitative - Arithmetic Reasoning and Math Knowledge

    A rectangle is 9 feet long and 4 feet wide. What is its perimeter?

    1. 26 feet Correct answer.
    2. 36 feet
    3. 22 feet
    4. 13 feet

    Explanation

    Perimeter is the total distance around the figure: P = 2(length + width) = 2(9 + 4) = 26 feet. Perimeter is measured in linear units, not square units.

  45. Question 45Quantitative - Arithmetic Reasoning and Math Knowledge

    How many ounces are in 3.5 pounds?

    1. 56 ounces Correct answer.
    2. 48 ounces
    3. 42 ounces
    4. 64 ounces

    Explanation

    There are 16 ounces in one pound, so converting pounds to ounces means multiplying: 16 × 3.5 = 56 ounces.

  46. Question 46Quantitative - Arithmetic Reasoning and Math Knowledge

    In a class of 30 students, the ratio of boys to girls is 2 to 3. How many girls are in the class?

    1. 18 Correct answer.
    2. 15
    3. 12
    4. 20

    Explanation

    The ratio creates 2 + 3 = 5 equal parts, so each part is 30 ÷ 5 = 6 students. Girls make up 3 parts, giving 3 × 6 = 18.

  47. Question 47Quantitative - Arithmetic Reasoning and Math Knowledge

    Solve for x: 5x − 7 = 23.

    1. 4
    2. 3.2
    3. 9
    4. 6 Correct answer.

    Explanation

    Add 7 to both sides to isolate the term containing x, giving 5x = 30, then divide both sides by 5 to get x = 6.

  48. Question 48Quantitative - Arithmetic Reasoning and Math Knowledge

    The price of a share of stock rises from $40 to $50. What is the percent increase?

    1. 80%
    2. 20%
    3. 10%
    4. 25% Correct answer.

    Explanation

    Percent change is the amount of change divided by the original value: ($50 − $40) ÷ $40 = 10 ÷ 40 = 0.25, or 25%.

  49. Question 49Quantitative - Arithmetic Reasoning and Math Knowledge

    A car travels 195 miles in 3 hours at a constant speed. At the same speed, how far will it travel in 5 hours?

    1. 390 miles
    2. 325 miles Correct answer.
    3. 300 miles
    4. 260 miles

    Explanation

    The constant speed is 195 ÷ 3 = 65 miles per hour. Multiplying the rate by 5 hours gives 65 × 5 = 325 miles.

  50. Question 50Quantitative - Arithmetic Reasoning and Math Knowledge

    What is the area of a triangle with a base of 12 inches and a height of 9 inches?

    1. 21 square inches
    2. 42 square inches
    3. 108 square inches
    4. 54 square inches Correct answer.

    Explanation

    The area of a triangle is one-half the base times the height: A = ½(12)(9) = 54 square inches.

  51. Question 51Quantitative - Arithmetic Reasoning and Math Knowledge

    Solve for x: 2(x − 3) = 4x + 8.

    1. −4
    2. 7
    3. −5.5
    4. −7 Correct answer.

    Explanation

    Distribute to get 2x − 6 = 4x + 8. Subtracting 2x and then 8 from both sides gives −14 = 2x, so x = −7, which checks since both sides equal −20.

  52. Question 52Quantitative - Arithmetic Reasoning and Math Knowledge

    Which values of x satisfy the inequality −3x + 4 > 19?

    1. x < −5 Correct answer.
    2. x > 5
    3. x > −5
    4. x < 5

    Explanation

    Subtract 4 from both sides to get −3x > 15, then divide by −3; dividing an inequality by a negative number reverses the direction, so x < −5.

  53. Question 53Quantitative - Arithmetic Reasoning and Math Knowledge

    The angles of a triangle are in the ratio 2:3:4. What is the measure of the largest angle?

    1. 40°
    2. 80° Correct answer.
    3. 60°
    4. 90°

    Explanation

    The three angles total 180° and are split into 2 + 3 + 4 = 9 equal parts, so each part is 20°. The largest angle takes 4 parts: 4 × 20° = 80°.

  54. Question 54Quantitative - Arithmetic Reasoning and Math Knowledge

    A circle has a radius of 5 centimeters. What is its circumference, in terms of π?

    1. 5π cm
    2. 20π cm
    3. 10π cm Correct answer.
    4. 25π cm

    Explanation

    Circumference equals 2π times the radius: C = 2π(5) = 10π centimeters. Area, by contrast, would be π times the square of the radius.

  55. Question 55Quantitative - Arithmetic Reasoning and Math Knowledge

    Simplify (2³ × 2⁵) ÷ 2⁴.

    1. 2⁸
    2. 2⁵
    3. 2²
    4. 2⁴ Correct answer.

    Explanation

    When multiplying powers with the same base, add the exponents to get 2⁸, then subtract the exponent of the divisor: 8 − 4 = 4, so the result is 2⁴.

  56. Question 56Quantitative - Arithmetic Reasoning and Math Knowledge

    A $250 item is subject to a 6% sales tax. What is the total cost?

    1. $310
    2. $265 Correct answer.
    3. $256
    4. $250.60

    Explanation

    The tax is 0.06 × $250 = $15, and the total cost is the price plus the tax: $250 + $15 = $265. This is equivalent to multiplying $250 by 1.06.

  57. Question 57Quantitative - Arithmetic Reasoning and Math Knowledge

    Which of these numbers is greatest?

    1. 3/5
    2. 0.605
    3. 0.6
    4. 5/8 Correct answer.

    Explanation

    Converting each value to a decimal gives 0.6, 0.6, 0.605, and 0.625. Comparing place values, 5/8 = 0.625 is the largest.

  58. Question 58Quantitative - Arithmetic Reasoning and Math Knowledge

    What is the least common multiple of 12 and 18?

    1. 36 Correct answer.
    2. 6
    3. 216
    4. 72

    Explanation

    Factoring gives 12 = 2² × 3 and 18 = 2 × 3². The least common multiple takes the highest power of each prime: 2² × 3² = 36.

  59. Question 59Quantitative - Arithmetic Reasoning and Math Knowledge

    What is the slope of the line that passes through the points (2, 3) and (6, 11)?

    1. 2 Correct answer.
    2. 8
    3. 4
    4. 1/2

    Explanation

    Slope is the change in y divided by the change in x: (11 − 3) ÷ (6 − 2) = 8 ÷ 4 = 2.

  60. Question 60Quantitative - Arithmetic Reasoning and Math Knowledge

    How many liters of a 20% acid solution must be added to 10 liters of a 50% acid solution to obtain a 30% acid solution?

    1. 20 liters Correct answer.
    2. 25 liters
    3. 15 liters
    4. 10 liters

    Explanation

    Let x be the liters added and equate the acid amounts: 0.20x + 0.50(10) = 0.30(10 + x). This simplifies to 0.20x + 5 = 3 + 0.30x, so 2 = 0.10x and x = 20 liters.

  61. Question 61Quantitative - Arithmetic Reasoning and Math Knowledge

    Machine A alone can complete a job in 4 hours, and machine B alone can complete it in 6 hours. Machine A starts alone and works for 2 hours; then machine B joins and both work until the job is done. How long does the job take in total?

    1. 3 hours
    2. 3.2 hours Correct answer.
    3. 4 hours
    4. 2.5 hours

    Explanation

    Machine A's rate is 1/4 job per hour, so in 2 hours it finishes 1/2 the job. The remaining 1/2 is done at the combined rate 1/4 + 1/6 = 5/12 job per hour, which takes (1/2) ÷ (5/12) = 1.2 hours, for a total of 3.2 hours.

  62. Question 62Quantitative - Arithmetic Reasoning and Math Knowledge

    If x + 1/x = 3, what is the value of x² + 1/x²?

    1. 11
    2. 7 Correct answer.
    3. 9
    4. 6

    Explanation

    Squaring both sides gives x² + 2 + 1/x² = 9, because the middle term is 2 · x · (1/x) = 2. Subtracting 2 from each side yields x² + 1/x² = 7.

  63. Question 63Quantitative - Arithmetic Reasoning and Math Knowledge

    A price is increased by 20% and then the resulting price is decreased by 20%. What is the net change from the original price?

    1. A 4% increase
    2. No change
    3. A 4% decrease Correct answer.
    4. A 20% decrease

    Explanation

    The two changes multiply rather than cancel: 1.20 × 0.80 = 0.96, which is 96% of the original price. The result is a 4% decrease, because the 20% decrease is taken from the larger, already-increased price.

  64. Question 64Quantitative - Arithmetic Reasoning and Math Knowledge

    Solve for x: 3/(x − 2) = 5/(x + 1).

    1. 6.5 Correct answer.
    2. 5
    3. −6.5
    4. 0.5

    Explanation

    Cross-multiplying gives 3(x + 1) = 5(x − 2), so 3x + 3 = 5x − 10. Rearranging yields 13 = 2x, and therefore x = 6.5, which makes both sides equal to 2/3.

  65. Question 65Quantitative - Arithmetic Reasoning and Math Knowledge

    Simplify: 20 − 4 × 3 + 6 ÷ 2

    1. 5
    2. 51
    3. 14
    4. 11 Correct answer.

    Explanation

    Multiplication and division are performed before addition and subtraction, so 4 × 3 = 12 and 6 ÷ 2 = 3. The expression becomes 20 − 12 + 3, and working left to right gives 11.

  66. Question 66Quantitative - Arithmetic Reasoning and Math Knowledge

    What is the arithmetic mean of 7, 12, 15, and 18?

    1. 12
    2. 52
    3. 13 Correct answer.
    4. 14

    Explanation

    The mean is the sum of the values divided by the number of values. The sum is 7 + 12 + 15 + 18 = 52, and 52 ÷ 4 = 13.

  67. Question 67Quantitative - Arithmetic Reasoning and Math Knowledge

    Expressed as a fraction in lowest terms, 0.375 is equal to which of the following?

    1. 3/4
    2. 3/5
    3. 3/8 Correct answer.
    4. 1/3

    Explanation

    Write 0.375 as 375/1000 and divide numerator and denominator by their greatest common factor, 125, to get 3/8. Checking by division confirms 3 ÷ 8 = 0.375.

  68. Question 68Quantitative - Arithmetic Reasoning and Math Knowledge

    A rectangular room measures 14 feet by 6 feet. How many feet of baseboard trim are needed to go once around the entire perimeter of the room?

    1. 40 Correct answer.
    2. 84
    3. 28
    4. 20

    Explanation

    The perimeter of a rectangle is 2(length + width). Substituting gives 2(14 + 6) = 2(20) = 40 feet.

  69. Question 69Quantitative - Arithmetic Reasoning and Math Knowledge

    A jacket priced at $80 is marked down 25%, and then an additional 10% is taken off the reduced price. What is the final price?

    1. $60
    2. $52
    3. $56
    4. $54 Correct answer.

    Explanation

    Successive discounts are applied one after the other, each to the new price. After 25% off, the price is 80 × 0.75 = $60, and 10% off that gives 60 × 0.90 = $54.

  70. Question 70Quantitative - Arithmetic Reasoning and Math Knowledge

    A bottle contains 2.4 liters of juice. How many 300-milliliter servings can be poured from the bottle?

    1. 12
    2. 6
    3. 24
    4. 8 Correct answer.

    Explanation

    Convert liters to milliliters first: 2.4 L = 2,400 mL. Dividing by the serving size gives 2,400 ÷ 300 = 8 servings.

  71. Question 71Quantitative - Arithmetic Reasoning and Math Knowledge

    A savings account earns 4% simple interest per year. If $1,500 is deposited and left untouched for 3 years, what is the total value of the account at the end of that time?

    1. $1,560
    2. $1,680 Correct answer.
    3. $1,800
    4. $1,620

    Explanation

    Simple interest is I = Prt, so the interest is 1,500 × 0.04 × 3 = $180. Adding the interest to the principal gives 1,500 + 180 = $1,680.

  72. Question 72Quantitative - Arithmetic Reasoning and Math Knowledge

    Solve for x: x/3 + x/6 = 5

    1. 15
    2. 5/3
    3. 30
    4. 10 Correct answer.

    Explanation

    The least common denominator is 6, so multiply every term by 6 to get 2x + x = 30, which is 3x = 30. Dividing both sides by 3 gives x = 10.

  73. Question 73Quantitative - Arithmetic Reasoning and Math Knowledge

    Two angles are supplementary, and the larger angle measures 34 degrees more than the smaller. What is the measure of the larger angle?

    1. 107° Correct answer.
    2. 117°
    3. 73°
    4. 143°

    Explanation

    Supplementary angles sum to 180°, so let the smaller angle be x and the larger be x + 34. Then 2x + 34 = 180, giving x = 73; the larger angle is 73 + 34 = 107°.

  74. Question 74Quantitative - Arithmetic Reasoning and Math Knowledge

    Written in simplest radical form, √50 is equal to which of the following?

    1. 10√5
    2. 5√2 Correct answer.
    3. 2√5
    4. 25√2

    Explanation

    Factor 50 as 25 × 2, the product of a perfect square and a prime. Then √50 = √25 × √2 = 5√2.

  75. Question 75Quantitative - Arithmetic Reasoning and Math Knowledge

    A bag holds 5 red marbles, 3 blue marbles, and 2 green marbles. If one marble is drawn at random, what is the probability that it is blue?

    1. 3/10 Correct answer.
    2. 1/2
    3. 1/5
    4. 3/5

    Explanation

    The bag contains 5 + 3 + 2 = 10 marbles in total, and 3 of them are blue. The probability is the number of blue marbles divided by the total, 3/10.

  76. Question 76Quantitative - Arithmetic Reasoning and Math Knowledge

    The first four terms of an arithmetic sequence are 5, 9, 13, and 17. What is the 20th term of the sequence?

    1. 80
    2. 77
    3. 85
    4. 81 Correct answer.

    Explanation

    The common difference is 9 − 5 = 4, and the nth term of an arithmetic sequence is a + (n − 1)d. Substituting gives 5 + (19)(4) = 5 + 76 = 81.

  77. Question 77Quantitative - Arithmetic Reasoning and Math Knowledge

    What are the solutions to the equation x² − 5x − 24 = 0?

    1. x = 6 and x = −4
    2. x = 4 and x = −6
    3. x = 8 and x = −3 Correct answer.
    4. x = −8 and x = 3

    Explanation

    The quadratic factors as (x − 8)(x + 3) = 0, since −8 and 3 multiply to −24 and add to −5. Setting each factor equal to zero gives x = 8 and x = −3.

  78. Question 78Quantitative - Arithmetic Reasoning and Math Knowledge

    For x ≠ 3 and x ≠ −4, the expression (x² − 9)/(x² + x − 12) is equivalent to which of the following?

    1. (x − 3)/(x + 4)
    2. (x + 3)/(x − 4)
    3. (x − 3)/(x − 4)
    4. (x + 3)/(x + 4) Correct answer.

    Explanation

    Factor both parts: the numerator is (x − 3)(x + 3) and the denominator is (x + 4)(x − 3). The common factor x − 3 cancels, leaving (x + 3)/(x + 4).

  79. Question 79Quantitative - Arithmetic Reasoning and Math Knowledge

    A right triangle has legs of length 9 and 12. What is the length of the altitude drawn from the right angle to the hypotenuse?

    1. 9.6
    2. 7.2 Correct answer.
    3. 6.0
    4. 5.4

    Explanation

    The hypotenuse is √(9² + 12²) = √225 = 15. The altitude to the hypotenuse equals the product of the legs divided by the hypotenuse, so h = (9 × 12)/15 = 108/15 = 7.2.

  80. Question 80Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A 2×2 square base supports four columns of unit cubes. Going clockwise from the front-left corner, the column heights are 3, 1, 2, and 1. How many unit cubes are in the structure?

    1. 8
    2. 7 Correct answer.
    3. 9
    4. 6

    Explanation

    The total is the sum of the four column heights, since each column is a solid stack: 3 + 1 + 2 + 1 = 7. No cube is hidden below another, because every column rests directly on the base.

  81. Question 81Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A solid rectangular prism is built from unit cubes. It measures 4 cubes long, 3 cubes wide, and 2 cubes high. How many unit cubes does it contain?

    1. 18
    2. 12
    3. 24 Correct answer.
    4. 36

    Explanation

    A rectangular block built of unit cubes contains length × width × height cubes. Here 4 × 3 × 2 = 24.

  82. Question 82Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A structure sits on a full 3×3 square base. Each of the four corner columns is 1 cube high, each of the four edge-middle columns is 2 cubes high, and the single center column is 3 cubes high. How many cubes are in the structure?

    1. 15 Correct answer.
    2. 12
    3. 17
    4. 14

    Explanation

    Add the three kinds of columns separately: 4 corners × 1 = 4, 4 edge-middles × 2 = 8, and 1 center × 3 = 3. The total is 4 + 8 + 3 = 15.

  83. Question 83Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A stepped tower has four solid layers stacked directly on one another. The bottom layer is a 4×4 slab of unit cubes, the next is a 3×3 slab, then a 2×2 slab, and the top is a single cube. How many unit cubes are used?

    1. 26
    2. 30 Correct answer.
    3. 24
    4. 32

    Explanation

    Each layer is a solid slab, so its cube count is the side length squared. Adding the layers gives 16 + 9 + 4 + 1 = 30.

  84. Question 84Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A 4×4×4 cube is built from 64 unit cubes. Every unit cube that lies on exactly one face of the large cube is then removed. How many unit cubes remain?

    1. 48
    2. 32
    3. 40 Correct answer.
    4. 24

    Explanation

    On each 4×4 face, only the interior 2×2 patch touches that face alone; the border cubes also touch a second face. So 6 × 4 = 24 cubes are removed, leaving 64 − 24 = 40.

  85. Question 85Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A structure stands on five columns arranged in a plus sign: one center column and four arm columns. The center column is 4 cubes high and each of the four arms is 2 cubes high. How many cubes does the structure contain?

    1. 14
    2. 11
    3. 10
    4. 12 Correct answer.

    Explanation

    The center contributes 4 cubes and the four arms contribute 4 × 2 = 8 cubes. Together that is 4 + 8 = 12.

  86. Question 86Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A 3×3×3 cube is assembled from unit cubes, and then the single unit cube at the very center of the large cube is taken out. How many unit cubes remain?

    1. 27
    2. 26 Correct answer.
    3. 24
    4. 25

    Explanation

    A 3×3×3 cube contains 27 unit cubes, and removing only the buried center cube leaves 27 − 1 = 26. The center cube touches no outside face, so its removal exposes no gap on the surface.

  87. Question 87Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A cube has red on top, blue on the bottom, green on the front, white on the back, yellow on the left, and black on the right. It is tipped forward one quarter turn, so the top face swings down to the front. Which color is on top now?

    1. Black
    2. White Correct answer.
    3. Green
    4. Blue

    Explanation

    A forward tip sends the top face to the front and brings the back face up to the top. The back face was white, so white is now on top.

  88. Question 88Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A standard die has opposite faces that always total 7. The die rests with 1 on top and 2 facing you. What number is on the bottom face?

    1. 3
    2. 5
    3. 6 Correct answer.
    4. 4

    Explanation

    Opposite faces on a standard die sum to 7, and the bottom is opposite the top. With 1 on top, the bottom must be 7 − 1 = 6.

  89. Question 89Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A cube with a black dot on its top face is rolled forward one quarter turn at a time, always in the same direction. After how many rolls is the dot on top again for the first time?

    1. 2
    2. 3
    3. 4 Correct answer.
    4. 6

    Explanation

    Each forward roll moves a face one position around the loop top → front → bottom → back → top. Four quarter turns complete the loop and return the dot to the top for the first time.

  90. Question 90Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A cube with a black face on top and a white face on the bottom is rolled right, then forward, then left, then backward, each roll a quarter turn. Where is the black face at the end?

    1. On the right face
    2. On the top face
    3. On the bottom face
    4. On the back face Correct answer.

    Explanation

    Track the black face roll by roll: the right roll carries it from the top to the right side, the forward roll leaves it on the right, the left roll lifts it back to the top, and the backward roll sends the top face to the back.

  91. Question 91Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A cube is turned one quarter turn about the axis that runs through the centers of its left and right faces. How many of the cube's six faces end up in a new position?

    1. 4 Correct answer.
    2. 2
    3. 0
    4. 6

    Explanation

    A turn about the left-right axis leaves the two faces on that axis fixed and cycles the remaining four faces around the cube. So four faces change position.

  92. Question 92Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A cube starts with red on top, green on the front, blue on the bottom, white on the back, yellow on the left, and black on the right. It is rolled to the right one quarter turn twice, then rolled forward one quarter turn. What color is on top?

    1. Yellow
    2. Blue
    3. Green
    4. White Correct answer.

    Explanation

    The first right roll brings the left face (yellow) to the top and the second brings the bottom face (blue) to the top; the right roll also moves the back face to no new position. The forward roll then brings the back face, white, up to the top.

  93. Question 93Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A rectangle is drawn and a single diagonal is added, joining two opposite corners. Into how many triangular regions is the rectangle divided?

    1. 4
    2. 2 Correct answer.
    3. 1
    4. 3

    Explanation

    One diagonal cuts a rectangle into exactly two parts, and each part has three straight sides, so both regions are triangles.

  94. Question 94Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A five-pointed star is drawn as one continuous outline with no internal lines. How many pointed tips does the outline have?

    1. 6
    2. 10
    3. 5 Correct answer.
    4. 4

    Explanation

    A star drawn in this way has one outward tip for each of its points, and this star has five points, so the outline shows five tips.

  95. Question 95Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A 3×3 array of equally spaced dots is drawn, three rows of three dots. How many squares of any size, with sides parallel to the rows and columns, can be formed using four of the dots as corners?

    1. 14 Correct answer.
    2. 13
    3. 9
    4. 20

    Explanation

    Count by size: 9 squares one dot apart on each side, 4 squares two dots apart, and 1 square three dots apart. The total is 9 + 4 + 1 = 14.

  96. Question 96Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A triangle has all three of its medians drawn, and the medians meet at a single interior point. Into how many small triangles is the original triangle divided?

    1. 4
    2. 6 Correct answer.
    3. 3
    4. 8

    Explanation

    Each of the three medians splits the triangle, and the three lines through the common center divide the interior into two small triangles per side. That gives 3 × 2 = 6 small triangles.

  97. Question 97Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A square has both of its diagonals drawn. Counting triangles of every size, how many triangles appear in the figure?

    1. 4
    2. 6
    3. 8 Correct answer.
    4. 12

    Explanation

    The diagonals create 4 small triangles around the center, and each diagonal also cuts the square into 2 larger triangles, giving 4 more. The total is 4 + 4 = 8.

  98. Question 98Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A rectangle 2 units wide and 4 units long is divided into unit squares by grid lines. How many squares of any size lie within it, counting only squares whose sides follow the grid lines?

    1. 12
    2. 8
    3. 10
    4. 11 Correct answer.

    Explanation

    Unit squares number 2 × 4 = 8. A 2×2 square fits in only one position across the width but in 3 positions along the length, giving 3 more. The total is 8 + 3 = 11.

  99. Question 99Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A warehouse log records boxes packed: Monday 12 small and 5 large; Tuesday 9 small and 8 large; Wednesday 15 small and 3 large; Thursday 11 small and 6 large. How many boxes were packed in total on Tuesday?

    1. 17 Correct answer.
    2. 20
    3. 23
    4. 14

    Explanation

    The Tuesday row gives 9 small and 8 large boxes. Adding the two entries in that row gives 9 + 8 = 17.

  100. Question 100Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A shop's rate table lists Machine A at 45 parts per hour, Machine B at 60 parts per hour, and Machine C at 52 parts per hour. At its listed rate, how many parts does Machine B make in a 3-hour shift?

    1. 180 Correct answer.
    2. 135
    3. 156
    4. 200

    Explanation

    Machine B's rate is 60 parts per hour, and output equals rate times time. Over 3 hours that is 60 × 3 = 180 parts.

  101. Question 101Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A timetable lists two train routes. Route 1 departs at 8:15 and arrives at 10:45. Route 2 departs at 9:05 and arrives at 11:20. How many minutes longer is Route 1's travel time than Route 2's?

    1. 5
    2. 20
    3. 15 Correct answer.
    4. 10

    Explanation

    Route 1 runs from 8:15 to 10:45, which is 2 hours 30 minutes, or 150 minutes. Route 2 runs from 9:05 to 11:20, which is 2 hours 15 minutes, or 135 minutes. The difference is 150 − 135 = 15 minutes.

  102. Question 102Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A supply order lists pens at $1.25 each with 4 ordered, notebooks at $2.50 each with 3 ordered, and folders at $0.75 each with 6 ordered. What is the total cost of the order?

    1. $20.00
    2. $12.50
    3. $17.00 Correct answer.
    4. $21.50

    Explanation

    Multiply each price by its quantity and add: pens 4 × $1.25 = $5.00, notebooks 3 × $2.50 = $7.50, folders 6 × $0.75 = $4.50. The total is $5.00 + $7.50 + $4.50 = $17.00.

  103. Question 103Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A fuel log shows Car A used 12 gallons to travel 360 miles, and Car B used 15 gallons to travel 420 miles. How much better is Car A's fuel economy than Car B's, in miles per gallon?

    1. 3
    2. 2 Correct answer.
    3. 4
    4. 1

    Explanation

    Fuel economy is miles divided by gallons. Car A gets 360 ÷ 12 = 30 mpg and Car B gets 420 ÷ 15 = 28 mpg, so Car A is 30 − 28 = 2 mpg better.

  104. Question 104Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A ticket table lists child tickets at $6, adult tickets at $11, and senior tickets at $8. A group buys 3 child tickets, 2 adult tickets, and 4 senior tickets. What is the total cost?

    1. $72 Correct answer.
    2. $84
    3. $66
    4. $64

    Explanation

    Multiply each price by the number of tickets of that type and add: 3 × $6 = $18, 2 × $11 = $22, and 4 × $8 = $32. The total is $18 + $22 + $32 = $72.

  105. Question 105Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A stack of unit cubes is built in three layers. The bottom layer is a 4-by-4 square of cubes; the next layer is a 3-by-3 square resting centered on it; the top layer is a 2-by-2 square. How many unit cubes are in the stack?

    1. 41
    2. 29 Correct answer.
    3. 25
    4. 33

    Explanation

    Multiply the cubes in each layer and add the layers: 4 x 4 = 16, 3 x 3 = 9, and 2 x 2 = 4. The total is 16 + 9 + 4 = 29.

  106. Question 106Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A structure is seen from directly above as a solid 3-by-3 square, and every one of the nine columns in that square is exactly 2 cubes tall. How many unit cubes make up the structure?

    1. 27
    2. 9
    3. 18 Correct answer.
    4. 36

    Explanation

    The top view gives the footprint, so there are 3 x 3 = 9 columns. Each column is 2 cubes tall, so the total is 9 x 2 = 18 cubes.

  107. Question 107Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A wall is built from unit cubes: it is 6 cubes long, 5 cubes high, and 1 cube thick. A rectangular doorway 2 cubes wide and 3 cubes high is then removed from the bottom edge, cutting through the full thickness. How many cubes remain in the wall?

    1. 18
    2. 24 Correct answer.
    3. 26
    4. 30

    Explanation

    Before the doorway the wall holds 6 x 5 x 1 = 30 cubes. The opening removes 2 x 3 x 1 = 6 cubes, leaving 30 - 6 = 24.

  108. Question 108Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A cube 5 units on a side is painted on all six faces and then cut into unit cubes. How many of the unit cubes have exactly two painted faces?

    1. 54
    2. 24
    3. 12
    4. 36 Correct answer.

    Explanation

    Cubes with exactly two painted faces lie on the edges but not at the corners. There are 12 edges, and each edge of a 5-unit cube has 5 - 2 = 3 such cubes, giving 12 x 3 = 36.

  109. Question 109Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A model is built on a 3-by-3 grid of columns. Each of the four corner columns is 2 cubes tall, each of the four edge-center columns is 3 cubes tall, and the center column is 5 cubes tall. How many cubes are used?

    1. 25 Correct answer.
    2. 24
    3. 20
    4. 27

    Explanation

    Add the four corner columns (4 x 2 = 8), the four edge-center columns (4 x 3 = 12), and the single center column (5). The total is 8 + 12 + 5 = 25.

  110. Question 110Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A solid rectangular block 3 cubes wide, 4 cubes deep, and 5 cubes high is painted on all outside faces and then separated into unit cubes. How many of the unit cubes have at least one painted face?

    1. 44
    2. 48
    3. 54 Correct answer.
    4. 6

    Explanation

    Count the unpainted cubes in the interior, which form a block of (3-2) by (4-2) by (5-2) = 1 x 2 x 3 = 6 cubes. The whole block holds 3 x 4 x 5 = 60 cubes, so 60 - 6 = 54 have paint on at least one face.

  111. Question 111Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A rectangular block measures 4 units long, 3 units wide, and 1 unit high. It is tipped so that it rests on a 3-unit by 1-unit face. How tall is the block now?

    1. 3
    2. 1
    3. 4 Correct answer.
    4. 12

    Explanation

    When the block rests on a 3-by-1 face, the remaining dimension, 4, must be vertical. Tipping changes which edge is vertical but never changes the edge lengths.

  112. Question 112Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A cube sits on a table. It is turned one quarter turn so that the face that was in front moves to the right side. Which face now occupies the position the front face had?

    1. The face that was on the back
    2. The face that was on the left Correct answer.
    3. The face that was on the right
    4. The face that was on the bottom

    Explanation

    A quarter turn carries each side face one position around the vertical axis in the direction of the motion of the front face. If the front face swings to the right, the left face swings into the front position.

  113. Question 113Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A cube has a different letter on each face: A on top, B in front, C on the right, D on the bottom, E on the back, and F on the left. The cube is given one quarter turn about the vertical axis so that the front face moves to the right side. Which letter is now in front?

    1. E
    2. B
    3. C
    4. F Correct answer.

    Explanation

    A quarter turn about the vertical axis slides each side face one position around: front goes to right, right to back, back to left, and left to front. The left face was F, so F is now in front.

  114. Question 114Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    Using the same cube, it is given two consecutive quarter turns about the vertical axis in the same direction, with the first turn moving the front face to the right side. Which letter is in front after the second turn?

    1. E Correct answer.
    2. C
    3. F
    4. A

    Explanation

    After the first turn the order around the axis is F in front, B on the right, C in back, E on the left. A second identical turn moves the back face to the front, so E comes to the front.

  115. Question 115Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A rectangular block is 2 units wide, 3 units deep, and 4 units high. It is rotated so that the 4-unit edge lies horizontal from left to right and the 3-unit edge becomes vertical. How long is the edge that now runs front to back?

    1. 4
    2. 6
    3. 2 Correct answer.
    4. 3

    Explanation

    The three edge lengths 2, 3, and 4 must be assigned one each to the left-right, vertical, and front-back directions. With 4 running left to right and 3 vertical, only 2 remains for front to back.

  116. Question 116Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A cube has A on top, B in front, C on the right, D on the bottom, E on the back, and F on the left. It is first given one quarter turn about the vertical axis so that the front face moves to the right side, and then tipped forward one quarter turn so that the top face moves to the front. Which letter is on the bottom after both moves?

    1. B
    2. F Correct answer.
    3. A
    4. D

    Explanation

    After the turn about the vertical axis the front is F, the right is B, the back is C, and the left is E, with A still on top. Tipping forward sends the top to the front and the front to the bottom, so the bottom now holds F.

  117. Question 117Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A triangle is drawn, and a single straight line is drawn from one vertex to a point on the opposite side. Into how many triangular regions is the original triangle divided?

    1. 2 Correct answer.
    2. 1
    3. 3
    4. 4

    Explanation

    A segment drawn from a vertex to the opposite side splits the triangle into one region on each side of the segment. That gives 2 triangular regions.

  118. Question 118Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A regular hexagon has its three long diagonals drawn, each joining a pair of opposite vertices, and all three pass through the center. Into how many triangular regions is the hexagon divided?

    1. 12
    2. 3
    3. 4
    4. 6 Correct answer.

    Explanation

    The three diagonals all meet at the center, so each of the six sides of the hexagon becomes the base of one triangular region with its apex at the center. That produces 6 triangular regions.

  119. Question 119Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    In a triangle, the midpoints of all three sides are joined, forming four small triangles inside the original one. Counting triangles of every size in the figure, how many triangles are there?

    1. 7
    2. 4
    3. 5 Correct answer.
    4. 6

    Explanation

    There are 4 small triangles inside the figure, and the original outer triangle is also present. Counting all sizes gives 4 + 1 = 5 triangles.

  120. Question 120Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A rectangle has one straight line drawn all the way across it from top to bottom and one straight line drawn all the way across it from left to right, dividing it into four smaller rectangles. Counting rectangles of every size, how many rectangles are in the figure?

    1. 9 Correct answer.
    2. 4
    3. 8
    4. 6

    Explanation

    Each rectangle is fixed by choosing 2 of the 3 vertical lines and 2 of the 3 horizontal lines, giving 3 x 3 = 9. Equivalently, there are 4 single small rectangles, 4 made of two small ones, and 1 made of all four.

  121. Question 121Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A rectangle is divided into a grid of 2 rows and 3 columns of unit squares. How many squares of every size are in the figure?

    1. 8 Correct answer.
    2. 6
    3. 11
    4. 9

    Explanation

    The unit squares give 2 x 3 = 6. A 2-by-2 square can start in either of the 2 columns, giving 2 more. The total is 6 + 2 = 8.

  122. Question 122Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A 3-by-3 grid of unit squares is drawn. How many rectangles of every size, including squares, are in the figure?

    1. 9
    2. 20
    3. 14
    4. 36 Correct answer.

    Explanation

    A rectangle is set by picking 2 of the 4 vertical grid lines and 2 of the 4 horizontal grid lines. That gives 6 x 6 = 36 rectangles in all.

  123. Question 123Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A depot log records deliveries. Monday: 14 crates and 9 barrels. Tuesday: 11 crates and 12 barrels. Wednesday: 17 crates and 7 barrels. On which day was the total number of items delivered greatest?

    1. Wednesday Correct answer.
    2. Monday
    3. Tuesday
    4. All three days were equal

    Explanation

    Add the two categories for each day: Monday 14 + 9 = 23, Tuesday 11 + 12 = 23, and Wednesday 17 + 7 = 24. The largest total is Wednesday's.

  124. Question 124Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A class record lists scores: Ana 88, Ben 76, Cara 94, Dev 81. What is the difference between the highest score and the lowest score?

    1. 24
    2. 18 Correct answer.
    3. 6
    4. 13

    Explanation

    The highest score is 94 and the lowest is 76. Subtracting gives 94 - 76 = 18.

  125. Question 125Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A workshop log records hours worked: Week 1: 6, Week 2: 9, Week 3: 4, Week 4: 5. What is the mean number of hours per week?

    1. 4
    2. 6 Correct answer.
    3. 8
    4. 24

    Explanation

    The total is 6 + 9 + 4 + 5 = 24 hours over 4 weeks. Dividing gives a mean of 24 / 4 = 6 hours per week.

  126. Question 126Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A results table lists two lap times for each runner. Runner P: 62 s and 58 s. Runner Q: 59 s and 64 s. Runner R: 61 s and 61 s. Whose total time for the two laps is lowest?

    1. Runner R
    2. Runner Q
    3. Runner P Correct answer.
    4. Runners Q and R are tied

    Explanation

    Add each pair: P totals 62 + 58 = 120 s, Q totals 59 + 64 = 123 s, and R totals 61 + 61 = 122 s. The smallest total belongs to P.

  127. Question 127Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A sale table lists original and sale prices: Coat $80 to $64; Boots $50 to $45; Scarf $20 to $14. Which item has the largest percent discount?

    1. Scarf Correct answer.
    2. Coat
    3. The coat and boots are tied
    4. Boots

    Explanation

    Percent discount equals the price drop divided by the original price, times 100: coat 16/80 = 20 percent, boots 5/50 = 10 percent, scarf 6/20 = 30 percent. The scarf has the largest percent discount.

  128. Question 128Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A production table lists run times and rates: Machine X runs 5 hours at 24 units per hour; Machine Y runs 3 hours at 30 units per hour; Machine Z runs 6 hours at 18 units per hour. What is the total number of units produced?

    1. 378
    2. 318 Correct answer.
    3. 342
    4. 258

    Explanation

    Multiply hours by rate for each machine: X gives 5 x 24 = 120, Y gives 3 x 30 = 90, and Z gives 6 x 18 = 108. Adding gives 120 + 90 + 108 = 318 units.

  129. Question 129Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A trip table lists distance and time: Trip 1 is 150 miles in 3 hours; Trip 2 is 220 miles in 4 hours; Trip 3 is 90 miles in 1.5 hours. What is the highest average speed among the three trips?

    1. 50 miles per hour
    2. 70 miles per hour
    3. 55 miles per hour
    4. 60 miles per hour Correct answer.

    Explanation

    Divide distance by time for each trip: 150/3 = 50, 220/4 = 55, and 90/1.5 = 60 miles per hour. The greatest of these is 60 miles per hour.

  130. Question 130Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A stack is built from unit cubes. The bottom layer is a solid rectangle 3 cubes wide and 2 cubes deep. On top of it, a solid rectangle 2 cubes wide and 1 cube deep is placed. How many cubes are in the stack?

    1. 7
    2. 5
    3. 8 Correct answer.
    4. 10

    Explanation

    The bottom layer is a full 3-by-2 rectangle, which holds 3 × 2 = 6 cubes. The upper layer is a 2-by-1 rectangle, which holds 2 cubes. Adding the layers gives 6 + 2 = 8 cubes.

  131. Question 131Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    Three separate columns of unit cubes stand on a table. One column is 4 cubes high, one is 2 cubes high, and one is 3 cubes high. How many cubes are used in all?

    1. 10
    2. 11
    3. 8
    4. 9 Correct answer.

    Explanation

    Separate columns share no cubes, so the totals simply add. The sum is 4 + 2 + 3 = 9 cubes.

  132. Question 132Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A block structure has three layers. The bottom layer is a solid rectangle 4 cubes by 3 cubes. The middle layer is a solid rectangle 3 cubes by 2 cubes resting fully on the bottom layer. The top layer is a single row of 2 cubes. How many cubes are in the structure?

    1. 20 Correct answer.
    2. 18
    3. 22
    4. 24

    Explanation

    Count each layer as a rectangle of cubes: bottom 4 × 3 = 12, middle 3 × 2 = 6, top 2. Adding the three layers gives 12 + 6 + 2 = 20.

  133. Question 133Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A structure is made of columns of unit cubes standing on a 3-by-3 grid of positions. Reading the columns row by row, the heights are: first row 3, 2, 1; second row 2, 1, 1; third row 1, 1, 1. How many cubes are in the structure?

    1. 13 Correct answer.
    2. 9
    3. 11
    4. 10

    Explanation

    Each position contributes exactly as many cubes as its listed height, even where columns are hidden behind taller ones. Summing all nine heights gives 3 + 2 + 1 + 2 + 1 + 1 + 1 + 1 + 1 = 13.

  134. Question 134Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A tower is built in layers. The bottom layer is a solid square 5 cubes by 5 cubes. Each layer above it is a solid square one cube shorter on each side than the layer below, so the layers are 5 by 5, 4 by 4, 3 by 3, 2 by 2, and 1 by 1. How many cubes are in the tower?

    1. 45
    2. 55 Correct answer.
    3. 50
    4. 60

    Explanation

    Each square layer holds the square of its side length. Adding them gives 25 + 16 + 9 + 4 + 1 = 55 cubes.

  135. Question 135Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A rectangular block measures 2 units high, 3 units wide, and 5 units long. It is turned so that it stands on a 2-unit by 3-unit face. What is the height of the block now?

    1. 3 units
    2. 10 units
    3. 5 units Correct answer.
    4. 2 units

    Explanation

    Standing on the 2-by-3 face makes the remaining edge the vertical one. That remaining edge is the 5-unit edge, so the height becomes 5 units.

  136. Question 136Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A cube has red on top, blue on the bottom, green in front, gray at the back, black on the right, and white on the left. The cube is tipped forward one quarter turn, so the top face moves to the front. Which color is on top after the tip?

    1. Green
    2. Gray Correct answer.
    3. Red
    4. Blue

    Explanation

    Tipping forward sends top to front, front to bottom, bottom to back, and back to top. The back face is gray, so gray rises to the top.

  137. Question 137Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A cube has a mark on its top face. It is rolled one quarter turn to the right, and then rolled one quarter turn forward, away from you. On which face does the mark end up?

    1. Right face Correct answer.
    2. Front face
    3. Back face
    4. Top face

    Explanation

    Rolling right turns the top face onto the right side. A forward roll spins the cube about a left-right axis, so the right face rotates in place and stays on the right.

  138. Question 138Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A block measures 3 units left to right, 2 units front to back, and 1 unit high. It is rotated one quarter turn about a vertical axis. What are its left-to-right and front-to-back measurements after the turn?

    1. 3 wide by 2 deep
    2. 2 wide by 3 deep Correct answer.
    3. 3 wide by 1 deep
    4. 1 wide by 2 deep

    Explanation

    A quarter turn about a vertical axis swaps the two horizontal measurements while leaving the height unchanged. The 3-unit and 2-unit edges exchange roles, giving 2 units left to right and 3 units front to back.

  139. Question 139Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A cube has 1 on top, 2 in front, and 3 on the right. On this cube every pair of opposite faces adds to 7. The cube is tipped forward one quarter turn. Which number is on top now?

    1. 3
    2. 6
    3. 2
    4. 5 Correct answer.

    Explanation

    Since opposite faces add to 7, the face opposite the front 2 is 5, and that face is at the back. Tipping forward brings the back face up to the top, so 5 is on top.

  140. Question 140Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A cube has faces labeled so that A is opposite D, B is opposite E, and C is opposite F. It sits with A on top and B in front. It is rolled one quarter turn to the right, then tipped forward one quarter turn. Which letter is on top after both moves?

    1. E Correct answer.
    2. C
    3. A
    4. B

    Explanation

    Rolling right puts F on top and A on the right, leaving B in front and E at the back. Tipping forward then sends the back face to the top, so E ends up on top.

  141. Question 141Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A square has both of its diagonals drawn. Into how many regions do the diagonals divide the square?

    1. 8
    2. 6
    3. 4 Correct answer.
    4. 2

    Explanation

    The two diagonals cross at the center of the square, and each half-diagonal borders one separate piece. The four pieces are the four triangular regions meeting at the center.

  142. Question 142Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    Three straight radii are drawn from the center of a circle to its rim, and no two of them lie on the same straight line. Into how many regions is the circle divided?

    1. 3 Correct answer.
    2. 4
    3. 2
    4. 6

    Explanation

    Each radius runs from the shared center out to the rim, so the radii act like spokes. Three spokes create one wedge-shaped region per spoke, for a total of 3 regions.

  143. Question 143Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A triangle has a straight line drawn parallel to its base, cutting the other two sides. How many triangles of any size are in the figure?

    1. 4
    2. 1
    3. 3
    4. 2 Correct answer.

    Explanation

    The parallel line cuts off a small triangle at the top that is similar to the original. Together with the original triangle itself, that makes 2 triangles; the region below the line is a trapezoid.

  144. Question 144Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A large square is divided by one straight line joining the midpoints of its top and bottom sides and one straight line joining the midpoints of its left and right sides. How many rectangles of any size, including squares, are in the figure?

    1. 6
    2. 4
    3. 9 Correct answer.
    4. 5

    Explanation

    The two midlines create 4 small squares. Rectangles also come from combining side-by-side pairs (2), stacked pairs (2), and the outer square itself (1), giving 4 + 2 + 2 + 1 = 9.

  145. Question 145Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    In a triangle, a straight line is drawn from each vertex to the midpoint of the opposite side, and all three lines pass through one interior point. Into how many small triangles is the original triangle divided?

    1. 4
    2. 3
    3. 8
    4. 6 Correct answer.

    Explanation

    These three lines are the medians, and they meet at a single interior point. Each side of the triangle becomes the base of two small triangles, one on either side of the median to that side, giving 6 in all.

  146. Question 146Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    Three straight lines are drawn across a circle. Each line crosses the other two, and the three lines do not all pass through one point. Into how many regions is the circle divided?

    1. 6
    2. 8
    3. 9
    4. 7 Correct answer.

    Explanation

    The first line makes 2 regions and the second line, crossing it, makes 4. The third line meets both earlier lines at two distinct interior points, so it passes through 3 regions and splits each, adding 3 more for a total of 7.

  147. Question 147Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A ticket table reads: Monday 45, Tuesday 52, Wednesday 38, Thursday 61. On which day were the fewest tickets sold?

    1. Thursday
    2. Monday
    3. Wednesday Correct answer.
    4. Tuesday

    Explanation

    Compare the four entries directly: 45, 52, 38, and 61. The smallest value is 38, which belongs to Wednesday.

  148. Question 148Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A shelf chart lists heights: shelf A 12 cm, shelf B 15 cm, shelf C 9 cm, shelf D 14 cm. Which shelf is the tallest?

    1. Shelf B Correct answer.
    2. Shelf D
    3. Shelf C
    4. Shelf A

    Explanation

    Compare the listed heights 12, 15, 9, and 14 cm. The greatest value is 15 cm, which belongs to shelf B.

  149. Question 149Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A packing table lists the boxes packed in four consecutive hours: 8, 12, 10, and 14. What is the total number of boxes packed in the four hours?

    1. 40
    2. 42
    3. 44 Correct answer.
    4. 46

    Explanation

    A total is found by adding every entry in the row. The sum is 8 + 12 + 10 + 14 = 44 boxes.

  150. Question 150Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    A price table lists a pen at $2, a notebook at $5, and a folder at $3. A student buys 2 pens, 1 notebook, and 3 folders. What is the total cost?

    1. $20
    2. $18 Correct answer.
    3. $16
    4. $22

    Explanation

    Multiply each unit price by the quantity bought, then add: 2 pens cost 2 × $2 = $4, 1 notebook costs $5, and 3 folders cost 3 × $3 = $9. The total is $4 + $5 + $9 = $18.

  151. Question 151Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

    Two stores list prices for three items. Store P: gloves $12, hat $9, scarf $7. Store Q: gloves $10, hat $11, scarf $8. A shopper buys one of each item. Which store costs less in total, and by how much?

    1. Store Q, by $2
    2. Store P, by $1 Correct answer.
    3. Store Q, by $1
    4. Store P, by $2

    Explanation

    Add the row for each store: store P totals $12 + $9 + $7 = $28, and store Q totals $10 + $11 + $8 = $29. Store P is cheaper by $29 − $28 = $1.

  152. Question 152Aviation and Instrument Comprehension

    The blue-and-brown portion of an attitude indicator represents the relationship between the aircraft and the:

    1. the natural horizon Correct answer.
    2. the aircraft's center of gravity
    3. the magnetic meridian
    4. the rate of turn

    Explanation

    The attitude indicator uses a gyro-stabilized horizon bar that stays aligned with the true horizon, with blue above representing sky and brown below representing ground. Bank is read from the angle between the miniature aircraft's wings and that bar, and pitch from the position of the nose relative to it.

  153. Question 153Aviation and Instrument Comprehension

    Before takeoff, an altimeter reads the published field elevation when the Kollsman window is set to:

    1. 29.92 in Hg
    2. the field elevation in feet
    3. the local setting Correct answer.
    4. zero

    Explanation

    Setting the Kollsman window to the current reported altimeter setting makes the instrument read field elevation while the aircraft is on the ground, which verifies that the altimeter is working and gives correct altitude indications in flight. Standard pressure, 29.92 in Hg, is used only when computing pressure altitude.

  154. Question 154Aviation and Instrument Comprehension

    The white arc on an airspeed indicator defines the:

    1. caution range
    2. normal operating range
    3. never-exceed speed range
    4. flap operating range Correct answer.

    Explanation

    The white arc runs from the full-flap stall speed at its lower limit to the maximum speed allowed with flaps extended at its upper limit, marking the flap operating range. The green arc shows the normal operating range, the yellow arc the caution range, and the red line the never-exceed speed.

  155. Question 155Aviation and Instrument Comprehension

    A standard-rate turn is one that completes:

    1. 360° in 2 minutes Correct answer.
    2. 360° in 4 minutes
    3. 180° in 1 minute
    4. 360° in 1 minute

    Explanation

    A standard-rate turn progresses at 3° per second, which turns the aircraft 180° in one minute and a full 360° in two minutes. Instrument pilots use this rate to time turns and to roll out on a desired heading.

  156. Question 156Aviation and Instrument Comprehension

    A heading indicator must be periodically reset to match the magnetic compass mainly because:

    1. it only works in level flight
    2. gyroscopic precession causes it to drift Correct answer.
    3. the earth's magnetic field changes rapidly
    4. it is driven by the static system

    Explanation

    The heading indicator is a gyroscopic instrument that precesses and drifts over time due to friction and the earth's rotation, so it must be realigned with the magnetic compass during straight-and-level flight. The magnetic compass remains the only instrument that directly senses magnetic north.

  157. Question 157Aviation and Instrument Comprehension

    A vertical speed indicator displays:

    1. the rate of climb or descent Correct answer.
    2. the altitude above mean sea level
    3. the airspeed trend
    4. the pitch attitude

    Explanation

    The VSI senses the rate at which static pressure changes and converts it into feet per minute of climb or descent. Because of a calibrated leak in its case, it lags slightly behind the aircraft's actual vertical speed.

  158. Question 158Aviation and Instrument Comprehension

    An aircraft's wing stalls when the:

    1. airspeed drops below the speed shown by the white arc
    2. critical angle of attack is exceeded Correct answer.
    3. aircraft's weight exceeds the design limit
    4. engine stops producing thrust

    Explanation

    A wing stalls at its critical angle of attack, the angle at which air can no longer flow smoothly over the upper surface and lift begins to decrease. Because that angle is a fixed property of the wing, a stall can occur at any airspeed, weight, or attitude if the angle is reached.

  159. Question 159Aviation and Instrument Comprehension

    To roll an aircraft to the right, the pilot moves the control wheel so that the:

    1. both ailerons deflect downward
    2. the elevator deflects upward
    3. left aileron up and the right aileron down Correct answer.
    4. left aileron down and the right aileron up

    Explanation

    Raising the left aileron spoils lift on the left wing while lowering the right aileron increases lift on the right wing, producing a rolling moment to the right. The elevator controls pitch about the lateral axis and plays no part in roll.

  160. Question 160Aviation and Instrument Comprehension

    On an attitude indicator, the miniature aircraft's left wing is lower than the right wing and its nose is above the horizon bar. The aircraft is:

    1. banked to the right with the nose up
    2. banked to the left with the nose down
    3. banked to the left with the nose up Correct answer.
    4. in a level turn to the left

    Explanation

    Bank angle is read from the angle between the miniature aircraft's wings and the horizon bar, and pitch is read from where the nose sits relative to the bar. A low left wing with the nose above the bar therefore means left bank with the nose above the horizon.

  161. Question 161Aviation and Instrument Comprehension

    Which flight instrument requires both pitot pressure and static pressure to operate?

    1. altimeter
    2. attitude indicator
    3. vertical speed indicator
    4. airspeed indicator Correct answer.

    Explanation

    The airspeed indicator compares ram (pitot) pressure with static pressure, so it needs both sources to compute the pressure difference that becomes indicated airspeed. The altimeter and VSI use static pressure alone, and the attitude indicator uses neither.

  162. Question 162Aviation and Instrument Comprehension

    An aircraft on the ground at a field elevation of 1,000 ft has its altimeter set to 30.02 in Hg. If the setting is changed to 29.92 in Hg without the aircraft moving, the altimeter will read approximately:

    1. 1,100 ft
    2. 900 ft Correct answer.
    3. 800 ft
    4. 1,000 ft

    Explanation

    Each 0.01 in Hg of altimeter setting corresponds to about 10 ft, so a 0.10 in Hg decrease lowers the indicated altitude by about 100 ft. Since the aircraft stays on the ground, the display falls from 1,000 ft to roughly 900 ft.

  163. Question 163Aviation and Instrument Comprehension

    An aircraft flying from an area of high pressure into an area of low pressure without resetting the altimeter will be:

    1. lower than the altimeter indicates Correct answer.
    2. at exactly the indicated altitude
    3. unaffected by the pressure change
    4. higher than the altimeter indicates

    Explanation

    The altimeter is calibrated to a standard pressure lapse, so when the aircraft flies into lower pressure the pressure surface corresponding to a given altitude descends and the aircraft is actually lower than the instrument shows. The familiar rule is 'high to low, look out below.'

  164. Question 164Aviation and Instrument Comprehension

    In a level, coordinated turn at a bank angle of 60°, the load factor is approximately:

    1. 1.4 G
    2. 2.0 G Correct answer.
    3. 3.0 G
    4. 1.0 G

    Explanation

    In a level turn the load factor equals 1 divided by the cosine of the bank angle, and the cosine of 60° is 0.5, giving 2.0 G. Load factor rises sharply as bank angle increases beyond that point.

  165. Question 165Aviation and Instrument Comprehension

    VY, the speed for best rate of climb, provides:

    1. the best glide ratio
    2. the lowest fuel flow per hour
    3. the greatest gain in altitude per unit of time Correct answer.
    4. the greatest altitude gain for a given horizontal distance

    Explanation

    VY is the speed at which the aircraft gains the most altitude in the least time, so it is used to reach a given altitude quickly. VX is the best angle of climb and yields the greatest altitude gain over a given horizontal distance.

  166. Question 166Aviation and Instrument Comprehension

    Adverse yaw during a roll into a turn is caused by:

    1. gyroscopic precession of the propeller
    2. greater induced drag on the down-going aileron Correct answer.
    3. increased parasite drag on the up-going wing
    4. the rudder being applied in the wrong direction

    Explanation

    The aileron deflected downward increases both lift and induced drag on its wing, dragging that wing aft and yawing the nose away from the intended direction of turn. Pilots counteract this with coordinated rudder pressure.

  167. Question 167Aviation and Instrument Comprehension

    Dihedral in an aircraft's wings contributes primarily to:

    1. longitudinal stability
    2. lateral stability Correct answer.
    3. reducing induced drag
    4. directional stability

    Explanation

    Dihedral is the upward angle of the wings from root to tip; when one wing drops, that wing meets the airflow at a higher effective angle and produces more lift, rolling the aircraft back toward level. This gives positive lateral (roll) stability.

  168. Question 168Aviation and Instrument Comprehension

    An aircraft's magnetic heading is 090° and the magnetic variation is 10° west. The true heading is:

    1. 090°
    2. 080°
    3. 100° Correct answer.
    4. 110°

    Explanation

    Variation is the angle between true north and magnetic north; westerly variation is added when converting magnetic heading to true heading and subtracted when converting the other way. With 10° west variation, true heading equals 090° + 10° = 100°.

  169. Question 169Aviation and Instrument Comprehension

    Which of the following speeds is the recommended speed for penetrating turbulent air?

    1. VFE
    2. VNE
    3. VY
    4. VA Correct answer.

    Explanation

    VA is the design maneuvering speed, the highest speed at which a full control deflection or a strong gust will stall the wing before overstressing the structure. Flying at or below VA in rough air protects the airframe.

  170. Question 170Aviation and Instrument Comprehension

    In most light aircraft, the attitude indicator and heading indicator are powered by:

    1. an engine-driven vacuum system Correct answer.
    2. the hydraulic system
    3. the aircraft's electrical system alone
    4. the pitot-static system

    Explanation

    These gyros are typically spun by air drawn through an engine-driven vacuum pump, which is why a pump failure makes both instruments unreliable. That failure is the reason partial-panel practice relies on the electric turn coordinator and the static-pressure instruments.

  171. Question 171Aviation and Instrument Comprehension

    In the standard atmosphere, temperature decreases with altitude at approximately:

    1. 1°C per 1,000 ft
    2. 2°C per 1,000 ft Correct answer.
    3. 5°C per 1,000 ft
    4. 3.5°C per 1,000 ft

    Explanation

    The standard atmosphere assumes a lapse rate of about 2°C per 1,000 ft of altitude gained up to the tropopause. Pilots use this rate to estimate standard temperature at an altitude and to judge how much conditions deviate from standard.

  172. Question 172Aviation and Instrument Comprehension

    While climbing with the pitot tube blocked and its drain hole also blocked, but with the static port clear, the airspeed indicator will:

    1. indicate an airspeed lower than actual
    2. remain accurate since the static port is clear
    3. indicate an airspeed higher than actual Correct answer.
    4. read zero once the climb begins

    Explanation

    With the pitot system sealed, ram pressure in the line stays roughly constant while the static port senses steadily decreasing outside pressure during the climb. The growing difference between the two makes the instrument read an ever-higher airspeed even though the aircraft may be slowing.

  173. Question 173Aviation and Instrument Comprehension

    An aircraft stalls at 50 knots in unaccelerated flight. In a level turn at 60° bank, its stall speed will be approximately:

    1. 71 knots Correct answer.
    2. 60 knots
    3. 50 knots
    4. 100 knots

    Explanation

    Stall speed increases with the square root of the load factor, and a 60° level bank produces a load factor of 2. Multiplying 50 knots by about 1.41 gives roughly 71 knots.

  174. Question 174Aviation and Instrument Comprehension

    An aircraft in a standard-rate turn begins on a heading of 270°. After 45 seconds, its heading will be approximately:

    1. 045° Correct answer.
    2. 360°
    3. 315°
    4. 090°

    Explanation

    A standard-rate turn changes heading at 3° per second, so 45 seconds produces 135° of change. Adding 135° to 270° gives 405°, which wraps around the compass to 045°.

  175. Question 175Aviation and Instrument Comprehension

    True course is 180°, magnetic variation is 12° east, and compass deviation is 3° west. With no wind, the magnetic heading to fly is:

    1. 192°
    2. 168° Correct answer.
    3. 195°
    4. 165°

    Explanation

    When converting from true course to magnetic heading, easterly variation is subtracted and westerly variation is added. Subtracting the 12° east variation from the 180° true course gives a magnetic heading of 168°; deviation would then be applied to obtain the compass heading.

  176. Question 176Aviation and Instrument Comprehension

    An aircraft's altimeter is set to 29.92 in Hg and reads 9,500 ft in air that is warmer than the standard atmosphere. Its true altitude is:

    1. exactly 9,500 ft
    2. higher than 9,500 ft Correct answer.
    3. lower than 9,500 ft
    4. unaffected by temperature because the setting is standard

    Explanation

    In air warmer than standard, pressure levels are spaced farther apart, so the aircraft is higher above a given pressure surface than the standard calibration assumes. With a standard setting and a warm day, true altitude exceeds the indicated altitude.

  177. Question 177Aviation and Instrument Comprehension

    Which primary flight control surface changes the aircraft's pitch attitude?

    1. Rudder
    2. Ailerons
    3. Flaps
    4. Elevator Correct answer.

    Explanation

    The elevator is hinged to the horizontal stabilizer and, when deflected, changes the tail-down or tail-up force that rotates the aircraft about its lateral axis, which is pitch. Fore and aft movement of the yoke or stick commands the elevator.

  178. Question 178Aviation and Instrument Comprehension

    On a typical light-airplane airspeed indicator, the white arc marks the:

    1. Never-exceed speed range
    2. Normal operating speed range
    3. Flap operating speed range Correct answer.
    4. Caution speed range

    Explanation

    The white arc spans the speed range in which flaps may be extended, from the power-off stall speed with flaps down at the bottom to the maximum flap-extended speed (VFE) at the top. The green arc marks the normal operating range and the yellow arc the caution range.

  179. Question 179Aviation and Instrument Comprehension

    Best glide speed is the speed that provides the:

    1. Slowest speed at which the airplane can fly without stalling
    2. Steepest climb over a nearby obstacle
    3. Greatest distance traveled per unit of altitude lost Correct answer.
    4. Greatest altitude gain per unit of time

    Explanation

    Best glide speed corresponds to the maximum lift-to-drag ratio, so the airplane travels the greatest horizontal distance for each foot of altitude sacrificed. It is the speed used for maximum range after an engine failure.

  180. Question 180Aviation and Instrument Comprehension

    As an airplane is slowed in level flight while maintaining altitude, induced drag:

    1. Increases as airspeed decreases Correct answer.
    2. Decreases as airspeed decreases
    3. Remains constant at all airspeeds
    4. Falls to zero at the stall speed

    Explanation

    Lift must equal weight in level flight, so as airspeed drops the angle of attack must rise, which strengthens the wingtip vortices and increases induced drag. Induced drag therefore varies inversely with the square of airspeed and is highest near the stall.

  181. Question 181Aviation and Instrument Comprehension

    In the Northern Hemisphere, an airplane turning from 350° through north to 010° will cause the magnetic compass to:

    1. Lead the actual heading by about 30°
    2. Remain frozen on 010° until the turn ends
    3. Accurately track the heading through the turn
    4. Lag, briefly showing a turn the other way Correct answer.

    Explanation

    Magnetic dip pulls the compass card downward in the Northern Hemisphere, and this turning error is largest on northerly headings. While turning through north the compass lags the actual heading and may momentarily appear to show a turn in the opposite direction; the error reverses on southerly headings.

  182. Question 182Aviation and Instrument Comprehension

    During a level turn, the inclinometer ball of the turn coordinator is deflected toward the outside of the turn. The proper correction is to:

    1. Increase the bank and add rudder into the turn
    2. Lower the nose and increase airspeed
    3. Reduce rudder pressure in the direction of the turn Correct answer.
    4. Raise the nose to increase the rate of turn

    Explanation

    A ball displaced to the outside of the turn means the tail is swinging outward, a skid caused by too much rudder in the direction of the turn. The pilot centers the ball by reducing rudder pressure into the turn, and reducing bank if needed, so the airplane returns to coordinated flight.

  183. Question 183Aviation and Instrument Comprehension

    An airplane sits on an airport whose field elevation is 2,000 ft. With the altimeter indicating 2,000 ft and set to 29.62 in Hg, the pressure altitude is:

    1. 1,700 ft
    2. 2,600 ft
    3. 2,300 ft Correct answer.
    4. 2,000 ft

    Explanation

    Pressure altitude is the altitude the altimeter would show with 29.92 in Hg set in the window. The setting is 0.30 in Hg below standard, and since about 1 in Hg corresponds to 1,000 ft, the pressure altitude is roughly 300 ft higher than the field elevation, or 2,300 ft.

  184. Question 184Physical Science

    A hockey puck slides across a frozen pond at a steady 5 m/s. Ignoring air resistance, what is the net force acting on the puck?

    1. Zero Correct answer.
    2. A constant force in the direction of motion
    3. A steadily decreasing force in the direction of motion
    4. Equal to the puck's weight

    Explanation

    Newton's first law states that an object continues at constant velocity unless a net external force acts on it. Constant velocity means zero acceleration, so by F = ma the net force must be zero. The puck's weight is balanced by the upward normal force from the ice.

  185. Question 185Physical Science

    Which quantity is measured in joules per second?

    1. Acceleration
    2. Force
    3. Power Correct answer.
    4. Momentum

    Explanation

    A joule per second is a watt, the SI unit of power, which expresses the rate at which energy is transferred or work is done. Force is measured in newtons, momentum in kilogram-meters per second, and acceleration in meters per second squared.

  186. Question 186Physical Science

    A solid sample has a mass of 200 g and a volume of 50 cm³. What is its density?

    1. 250 g/cm³
    2. 0.25 g/cm³
    3. 2 g/cm³
    4. 4 g/cm³ Correct answer.

    Explanation

    Density is mass divided by volume, so 200 g ÷ 50 cm³ = 4 g/cm³. Dividing in the reverse order or combining the numbers some other way gives one of the incorrect choices.

  187. Question 187Physical Science

    Sound travels fastest through which of the following media?

    1. Steel Correct answer.
    2. Warm air
    3. Cold air
    4. A vacuum

    Explanation

    Sound is a mechanical wave that propagates by compressing and expanding its medium, so it moves fastest through stiff, closely packed materials such as steel. It cannot travel through a vacuum at all because there are no particles to compress.

  188. Question 188Physical Science

    The atomic number of an element equals the number of

    1. electrons in the outermost shell
    2. protons plus neutrons
    3. protons in the nucleus Correct answer.
    4. neutrons in the nucleus

    Explanation

    The atomic number is defined as the number of protons, which fixes the element's identity and its place on the periodic table. In a neutral atom it also equals the total number of electrons, but not the number of valence electrons alone.

  189. Question 189Physical Science

    A cart starts from rest and accelerates uniformly at 3 m/s² for 5 s. What is its speed at the end of that time?

    1. 15 m/s Correct answer.
    2. 8 m/s
    3. 30 m/s
    4. 75 m/s

    Explanation

    For constant acceleration from rest, speed equals acceleration multiplied by time: v = at = 3 m/s² × 5 s = 15 m/s. The distance covered would be ½at² = 37.5 m, which is a different quantity.

  190. Question 190Physical Science

    A 2 kg block moving at 5 m/s slides on frictionless ice and collides with a stationary 3 kg block. The blocks stick together. What is their speed immediately after the collision?

    1. 5 m/s
    2. 1 m/s
    3. 1.7 m/s
    4. 2 m/s Correct answer.

    Explanation

    With no net external horizontal force, total momentum is conserved: (2 kg)(5 m/s) = 10 kg·m/s before the collision, and the combined 5 kg mass must carry that same momentum afterward. Dividing 10 kg·m/s by 5 kg gives 2 m/s.

  191. Question 191Physical Science

    A 12 V battery is connected across a 4 Ω resistor. What current flows through the resistor?

    1. 48 A
    2. 0.33 A
    3. 3 A Correct answer.
    4. 16 A

    Explanation

    Ohm's law gives I = V/R, so 12 V ÷ 4 Ω = 3 A. The power dissipated in the resistor would be V²/R = 36 W, a different quantity.

  192. Question 192Physical Science

    At its boiling point, a pure liquid absorbs heat while its temperature stays constant because the energy is used mainly to

    1. overcome intermolecular attractions Correct answer.
    2. increase the vapor pressure of the liquid
    3. raise the average molecular speed
    4. split the molecules into separate atoms

    Explanation

    During a phase change, added energy increases the potential energy of the molecules by overcoming the attractions between them, so the temperature, which reflects average kinetic energy, does not rise. The temperature climbs again only after the liquid has fully vaporized.

  193. Question 193Physical Science

    A fixed amount of gas is held at constant temperature while its pressure is doubled. What happens to its volume?

    1. It stays the same
    2. It halves Correct answer.
    3. It doubles
    4. It becomes four times as large

    Explanation

    Boyle's law states that for a fixed mass of gas at constant temperature, pressure and volume are inversely proportional, so PV is constant. Doubling the pressure therefore halves the volume.

  194. Question 194Physical Science

    A ray of light passes from air into a block of glass at an angle. Which statement describes what happens to the ray?

    1. It slows down and bends toward the normal Correct answer.
    2. It speeds up and continues in the same direction
    3. It slows down and bends away from the normal
    4. It speeds up and bends away from the normal

    Explanation

    Glass is optically denser than air, so light travels more slowly in it. When a ray enters a medium in which it moves more slowly, it bends toward the normal, the line perpendicular to the surface.

  195. Question 195Physical Science

    How does the hydrogen ion concentration of a solution at pH 4 compare with that of a solution at pH 6?

    1. 100 times more acidic Correct answer.
    2. 10 times more acidic
    3. 2 times more acidic
    4. 1000 times more acidic

    Explanation

    pH is a logarithmic scale on which each unit represents a tenfold change in hydrogen ion concentration. A difference of two pH units therefore means 10² = 100 times the concentration.

  196. Question 196Physical Science

    Two identical bullets are released from the same height at the same instant. One is dropped from rest and the other is fired horizontally from a gun. Neglecting air resistance, which statement is true?

    1. Both bullets strike the ground at the same time Correct answer.
    2. The dropped bullet lands first
    3. The fired bullet lands first
    4. The heavier bullet lands first

    Explanation

    Horizontal and vertical motions are independent. Both bullets begin with zero vertical velocity and fall the same vertical distance under gravity, so their flight times are equal; the fired bullet simply covers horizontal distance as well.

  197. Question 197Physical Science

    A car travels around a curve of constant radius at twice its original speed. The centripetal force required is

    1. twice as large
    2. four times as large Correct answer.
    3. half as large
    4. unchanged

    Explanation

    Centripetal force equals mv²/r, so it depends on the square of the speed. Doubling the speed at the same radius multiplies the required force by 2² = 4.

  198. Question 198Physical Science

    In the balanced equation CH₄ + __O₂ → CO₂ + 2H₂O, what coefficient belongs in front of O₂?

    1. 1
    2. 1.5
    3. 3
    4. 2 Correct answer.

    Explanation

    Balancing requires equal numbers of each kind of atom on both sides of the equation. The products contain 4 oxygen atoms, 2 in CO₂ and 2 in the two water molecules, so 2 O₂ molecules supply them; carbon and hydrogen are already balanced.

  199. Question 199Physical Science

    A 6 Ω resistor and a 3 Ω resistor are connected in parallel. What is the equivalent resistance of the combination?

    1. 4.5 Ω
    2. 2.0 Ω Correct answer.
    3. 9.0 Ω
    4. 1.0 Ω

    Explanation

    For two resistors in parallel, 1/R = 1/6 + 1/3 = 1/2, so R = 2 Ω. An equivalent resistance for a parallel network is always smaller than the smallest individual resistor.

AFOQT flashcards

32 cards. Read the term and the definition here. The deck at the top of this page is optional.

Synonym analogy
Two word pairs in which both members of each pair mean nearly the same thing, as in happy:joyful :: begin:start; the linking bridge is 'means the same as.'
Antonym analogy
Pairs whose members have opposite meanings, such as hot:cold :: ancient:modern; the correct answer must reverse in the same direction as the stem pair.
Part-to-whole analogy
The first term is a component of the second, as in wheel:car :: page:book; the answer must keep the smaller part before the larger whole.
Cause-and-effect analogy
The first term produces the second, as in rain:flood :: spark:fire; the answer must keep the direction from cause to result.
Function analogy
The first term is an object and the second is its purpose, as in knife:cut :: pen:write; the answer must express a use rather than a description.
Degree analogy
The two terms differ only in intensity along one scale, as in warm:hot :: cool:cold; the answer must move the same direction by a similar step.
Abstruse
Adjective meaning difficult to understand or obscure; an abstruse explanation is one that most listeners cannot follow without extra background.
Laconic
Adjective describing speech that is very brief and sparing in words, sometimes to the point of bluntness; a laconic answer is a short one.
Garrulous
Adjective for a person who talks a great deal, often at length about trivial matters; it is the opposite of taciturn and of laconic.
Frugal
Adjective meaning economical and careful with money or resources; a frugal buyer purchases only what is necessary and avoids waste.
Percent change formula
Percent change equals the new value minus the old value, divided by the old value, then multiplied by 100; a negative result is a decrease.
Average speed
Average speed for an entire trip equals total distance traveled divided by total time taken, not the average of the separate leg speeds.
Combined work rate
If one worker completes a job in a hours and another in b hours, working together they finish in ab divided by (a + b) hours.
Simple interest formula
Interest equals principal times annual rate times time in years, I = Prt; for six months use t = 0.5, then add interest to principal for the total.
Trapezoid area formula
Area equals one-half the sum of the two parallel bases multiplied by the height between them: A = ½(b₁ + b₂)h.
Cylinder volume formula
Volume equals the area of the circular base times the height: V = πr²h, where r is the base radius and h the height.
3-4-5 right triangle
A right triangle with legs 3 and 4 has hypotenuse 5; any whole-number multiple such as 6-8-10 or 9-12-15 is also a right triangle.
30-60-90 triangle
The sides are in ratio x, x√3, and 2x; the shortest side faces the 30° angle and the hypotenuse is twice the shortest side.
Median versus mean
The median is the middle value of an ordered list and ignores extremes; the mean is the sum divided by the count and is pulled by outliers.
Independent event probability
The probability that two independent events both occur equals the product of their separate probabilities; two coin flips both heads is ½ × ½ = ¼.
Block counting total
The total number of blocks equals the sum of the heights of every column, since each column rests on the ground and contains no hidden gaps.
Cube faces and edges
A cube has 6 square faces, 12 edges, and 8 vertices; each face touches four other faces and is parallel to exactly one opposite face.
Hidden figures
The target shape is embedded at the same size and orientation as shown; trace straight line segments through the drawing to find its outline.
Table reading procedure
Find the row label and the column label, then read the cell where they intersect; check the units stated in the header before choosing an answer.
Altimeter reading
On the altimeter the short hand indicates thousands of feet and the long hand hundreds; one full sweep of the long hand equals 1,000 feet.
Airspeed indicator
The airspeed dial is marked in knots; the white arc is the flap-operating range, the green arc the normal range, and the red line maximum speed.
Attitude indicator
The attitude indicator shows pitch and bank: the horizon bar stays level with the real horizon while the miniature aircraft tilts with the airplane.
Vertical speed indicator
The VSI shows rate of climb or descent in feet per minute; a needle above the zero mark means climbing, below it means descending.
Bernoulli lift
Air moving faster over the curved upper surface of a wing has lower pressure than slower air below, so the pressure difference pushes the wing upward.
Newton's second law
Net force equals mass times acceleration, F = ma; at constant mass, doubling the net force doubles the acceleration produced.
Density formula
Density equals mass divided by volume; an object of 100 grams occupying 20 cubic centimeters has a density of 5 grams per cubic centimeter.
Ohm's law
Voltage equals current times resistance, V = IR; at a fixed voltage, doubling the resistance halves the current through the circuit.

AFOQT study guide

Verbal - Verbal Analogies and Word Knowledge

Relationship first, vocabulary second

Verbal analogies reward naming the exact bridge between the first pair before looking at the choices. Common relationships include synonym/antonym, category-member, part-whole, function, cause-effect, worker-tool, degree, and order. Keep the bridge directional: 'A ___ is a type of ' is not the same as ' includes ___.' Check grammatical consistency (noun:noun, adjective:noun), and beware choices that are merely associated with the topic rather than matching the relation. Near-synonyms often differ in intensity or connotation, so choose the pair with the same shade of meaning. For word knowledge, use context and word parts-prefixes, roots, suffixes-and eliminate choices that are too broad, too narrow, or wrong in tone.

Worked example: CARPENTER : SAW :: surgeon : ___. Bridge: a carpenter uses a saw as a characteristic tool. Among scalpel, hospital, patient, operation, the match is scalpel. Hospital is a workplace, patient is an object of care, and operation is a procedure-each changes the relationship.

Trap: reversed order. If the stem is tool : user, an answer of user : tool is wrong even if the words are related. Another trap is choosing a synonym for one stem word instead of completing the analogy.

Rule of thumb: write a short sentence for the stem pair, then test every choice in the same sentence. If more than one fits, tighten the sentence with a more specific relationship.

Quantitative - Arithmetic Reasoning and Math Knowledge

Translate, then compute

Arithmetic reasoning tests translation from words to equations; math knowledge tests recall and manipulation. For word problems, identify the unknown, assign a variable, and write units beside every number. Watch for rate problems (distance = rate × time, work rates add), proportions, percent change, weighted averages, and mixtures. Percent change uses the original amount as the base: an increase from 80 to 100 is 20/80 = 25%, not 20%. Average is total ÷ count, so if a problem gives an average and count, multiply to recover the total. In geometry, distinguish perimeter from area and radius from diameter; in algebra, apply order of operations and check inequality direction when multiplying or dividing by a negative. No calculator is allowed, so estimate and backsolve from answer choices when exact computation is slow.

Worked example: A shirt costs $80 and is marked up to $100. What is the percent increase? Increase = 20; base = original 80; 20/80 = 0.25 = 25%. Choosing 20% uses the new price as the base-a classic trap.

Another trap is extraneous information and unit mismatches (minutes vs hours, cents vs dollars). Convert before calculating.

Rule of thumb: label every quantity, and if two answer choices differ only by a unit or a base, re-read the question before selecting.

Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading, Aviation and Instrument Comprehension, Physical Science

Speed with accuracy

This domain mixes spatial visualization and rapid data/instrument reading. Block Counting: count visible cubes, then add hidden cubes needed to support cubes above them; a stack cannot float. Rotated Blocks: track one distinctive feature through the rotation; a mirror image is not a rotation. Hidden Figures: scan for the exact target shape, including embedded lines and shared edges, not just the overall outline. Table Reading: read row and column headers first, locate the intersection, and watch for units, negative values, and rows that shift by one. Instrument Comprehension: relate attitude indicator (pitch/bank), heading indicator, altimeter, airspeed, turn coordinator, and vertical speed; avoid reversing bank or pitch. Physical Science: focus on units, Newton's laws, simple machines, energy conservation, density/pressure, and basic circuits.

Worked example: A block stack shows a cube on the second level with nothing directly beneath it in the drawing. Count one hidden cube under it, because the upper cube must be supported; do not count empty space. Rule of thumb: in block counting, count by columns and add hidden supports; in table reading, point to the row and column with a mental marker before reading the cell.

Trap: time pressure encourages skipping the header or assuming a shape is present because its outline is similar. Answer every item-there is no penalty for guessing-but mark uncertain ones and return only if time remains.

AFOQT cheat sheet

Quick reference

Verbal - Verbal Analogies and Word Knowledge

  • Analogies are written A : B :: C : D; build a precise sentence linking A to B, then apply that same sentence to C and select the choice for D.

  • Standard bridges: synonym, antonym, part-to-whole, whole-to-part, cause-to-effect, object-to-function, degree of intensity, worker-to-tool, category-to-member.

  • The grammatical class and word order of A:B must match C:D; if the bridge sentence requires a different part of speech for the answer pair, the choice is wrong.

  • Degree analogies keep direction: warm : hot :: cool : cold both move toward greater intensity; a choice that reverses direction is incorrect.

  • Prefixes: bene- good, mal- bad, ambi- both, circum- around, e-/ex- out, in-/im- not, pre- before, post- after, sub- under, super- above, anti- against.

  • Suffixes: -ous full of, -ity state of, -ify to make, -ism doctrine, -cide killing, -logy study of, -phobia fear, -able capable of.

  • High-frequency opposite pairs: garrulous/taciturn, frugal/profligate, ephemeral/perpetual, zealous/indifferent, abstruse/obvious, candid/evasive.

  • Word-knowledge distractors often share a root with the stem but differ in connotation; the correct choice matches the exact sense used in the sentence or stem.

  • When two choices both fit, prefer the one with the same relationship type, the same degree of intensity, and the same word order as the stem pair.

Quick reference

Quantitative - Arithmetic Reasoning and Math Knowledge

  • Percent change = (new value − old value) ÷ old value × 100; percent of a number = rate × base.

  • Distance = rate × time; average speed for a whole trip = total distance ÷ total time, never the average of the separate speeds.

  • Combined work time for individual times a and b is ab ÷ (a + b) hours, because the rates add as 1/a + 1/b.

  • Simple interest I = Prt, with t in years (6 months = 0.5); total amount A = P + I.

  • Area: rectangle lw, triangle ½bh, circle πr², trapezoid ½(b₁ + b₂)h, parallelogram bh.

  • Volume: box lwh, cylinder πr²h, cone ⅓πr²h, sphere (4/3)πr³.

  • Right triangles: a² + b² = c²; common triples 3-4-5, 5-12-13, 8-15-17; 45-45-90 sides are x, x, x√2; 30-60-90 sides are x, x√3, 2x.

  • Mean = sum ÷ count; median = middle value of an ordered list; mode = most frequent value; range = maximum − minimum.

  • Probability of independent events both occurring = product of their probabilities; of mutually exclusive events = sum.

Quick reference

Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading, Aviation and Instrument Comprehension, Physical Science

  • Block counting: total blocks = sum of the heights of every visible column, because each column rests on the ground and contains no internal gaps.

  • Cube facts: 6 square faces, 12 edges, 8 vertices; each face touches four neighbors and is parallel to exactly one opposite face, so opposite faces are never adjacent.

  • Rotated blocks: a 90° turn moves a marked face to an adjacent position, a 180° turn moves it to the opposite face, and a 270° turn mirrors the 90° result in the other direction.

  • Hidden figures: the target shape appears at the same size and orientation as displayed; follow straight line segments through the clutter instead of judging the overall outline.

  • Table reading: identify the row label and column label first, then read the cell at their intersection; confirm the units given in the header before answering.

  • Altimeter: short hand = thousands of feet, long hand = hundreds of feet; one full sweep of the long hand equals 1,000 feet.

  • Airspeed indicator reads in knots (white arc = flap range, green arc = normal range, red line = maximum); the VSI reads feet per minute, needle above zero = climb, below zero = descent.

  • Bernoulli principle: faster-moving air exerts lower pressure, so lower pressure over the curved upper wing surface versus higher pressure below produces lift.

  • Physical science constants and formulas: F = ma, density = mass ÷ volume, V = IR, work = force × distance, speed of sound ≈ 343 m/s, speed of light ≈ 3 × 10⁸ m/s.

AFOQT key terms

Synonym

A word that carries the same or nearly the same meaning as another word, such as 'brief' and 'short'. Analogy and word-knowledge items often turn on matching words with closely similar meanings.

Related: Antonym, Connotation
Antonym

A word whose meaning is opposite to that of another word, such as 'expand' and 'contract'. Spotting opposites helps you eliminate choices that reverse the intended relationship.

Related: Synonym, Degree relationship
Analogy

A pair of words linked by a specific logical relationship, presented so that the same relationship can be found in a second pair. The task is to identify the rule the first pair shares.

Related: Bridge sentence
Bridge sentence

A short sentence you write to state the link between the first two words of an analogy, then test on each answer choice. It makes a hidden relationship explicit and easy to compare.

Related: Analogy
Part-to-whole relationship

A link in which one item is a component of the other, as a wheel is part of a car. Direction matters, since reversing a part-to-whole pair produces a wrong answer.

Related: Cause-and-effect relationship
Cause-and-effect relationship

A link in which one thing produces or brings about the other, as a virus produces an illness. Check that the direction of influence matches the original word pair.

Related: Part-to-whole relationship
Degree relationship

A link based on intensity, where one word is a weaker or stronger version of the other, like 'warm' and 'hot'. The two words share meaning but differ in strength.

Related: Synonym, Antonym
Connotation

The emotional or evaluative shading a word carries beyond its literal meaning, such as the difference between 'thrifty' and 'stingy'. Positive, negative, or neutral tone can decide an answer.

Related: Synonym
Ratio

A comparison of two quantities by division, often written as a fraction or with a colon. It states how many units of one amount exist for each unit of another.

Related: Proportion, Rate
Proportion

An equation stating that two ratios are equal. Solving one usually means cross-multiplying to find an unknown quantity in a comparison problem.

Related: Ratio
Percentage

A number expressed as a fraction of one hundred, used to describe parts of a total. Converting among decimals, fractions, and percents is a frequent arithmetic-reasoning step.

Related: Ratio
Arithmetic mean

The sum of a set of values divided by the number of values. Word problems often supply the mean and ask you to recover a missing value or the overall total.

Related: Rate
Rate

A ratio comparing quantities with different units, such as miles per hour or dollars per pound. Units must be made consistent before multiplying or dividing.

Related: Ratio, Arithmetic mean
Prime number

A whole number greater than one whose only positive divisors are one and itself, such as seven or thirteen. Factorization questions depend on recognizing primes quickly.

Related: Least common multiple
Least common multiple

The smallest positive number that is a multiple of two or more given numbers. It is used to build a common denominator or to find when repeating events coincide.

Related: Prime number
Order of operations

The agreed sequence for evaluating an expression: parentheses, then exponents, then multiplication and division left to right, then addition and subtraction left to right. Ignoring it changes the result.

Related: Exponent
Exponent

A raised number showing how many times a base is used as a factor, so three to the fourth means three multiplied by itself four times. Rules for combining exponents appear in math-knowledge items.

Related: Order of operations
Pythagorean theorem

The rule that in a right triangle the square of the hypotenuse equals the sum of the squares of the two shorter sides. It is used to find an unknown side length.

Related: Slope
Slope

A measure of how steep a line is, computed as the vertical change divided by the horizontal change between two points. On a graph it represents the rate of change.

Related: Rate, Pythagorean theorem
Block counting

A spatial task in which you determine how many identical cubes make up a stack, including cubes hidden behind or beneath visible ones. Every stack must rest on the floor or on another cube.

Related: Isometric drawing, Occluded block
Isometric drawing

A pictorial view showing three faces of a stack at once, typically with vertical edges and slanted depth lines. It lets you read height, width, and depth from a single picture.

Related: Block counting, Occluded block
Occluded block

A cube that is fully or partly hidden from the viewing angle but must exist to support blocks above it or to fill an unseen column. Miscounting these is the standard trap.

Related: Block counting, Isometric drawing
Mental rotation

The act of imagining how a shape would appear after being turned a stated number of degrees, without changing its size or proportions. A mirrored shape is not the same as a rotated one.

Related: Angle of rotation
Angle of rotation

The amount a figure is turned about a point, usually given in degrees such as ninety or one hundred eighty, with direction noted as clockwise or counterclockwise. It defines the orientation you should expect.

Related: Mental rotation
Hidden figure

A puzzle in which a simple geometric shape is concealed inside a more complex drawing of overlapping lines. The target shape appears at the same size and orientation, never resized.

Related: Figure-ground perception
Figure-ground perception

The ability to separate a target shape from surrounding background lines that pull the eye away. Tracing outlines deliberately improves accuracy under time pressure.

Related: Hidden figure
Table reading

A speeded task requiring you to locate the value at a specified row and column in a data table and report it accurately. Consistent scanning habits matter more than raw speed.

Related: Row-column intersection, Interpolation
Row-column intersection

The single cell where a named row and a named column cross, holding the value requested by a table item. Misreading the row or column label is the most common error.

Related: Table reading
Interpolation

Estimating a value that falls between two printed entries in a table by assuming the change across the gap is steady. It is used when the exact figure is not listed.

Related: Table reading
Attitude indicator

A gyroscopic instrument that displays the aircraft's pitch and bank relative to the horizon, using a fixed miniature aircraft and a moving horizon bar. It shows climb, dive, and angle of bank.

Related: Heading indicator
Heading indicator

A gyroscopic instrument showing the direction the nose of the aircraft points, read in degrees from zero to three hundred fifty-nine. It must be reset periodically to agree with the magnetic compass.

Related: Magnetic heading, Attitude indicator
Altimeter

An instrument that displays height above a chosen reference level, normally sea level, in feet. On a basic dial the short hand reads thousands and the long hand reads hundreds.

Related: Vertical speed indicator
Airspeed indicator

An instrument showing the aircraft's speed through the air in knots, marked with colored arcs for safe operating ranges. It does not measure speed over the ground.

Related: Altimeter
Turn coordinator

An instrument with a small aircraft symbol that shows the rate and quality of a turn and whether the turn is coordinated. Centering the inclinometer ball indicates a balanced turn.

Related: Attitude indicator
Vertical speed indicator

An instrument that shows whether the aircraft is climbing, descending, or holding level, and how fast, in feet per minute. A zero reading means altitude is not changing.

Related: Altimeter
Magnetic heading

The direction the aircraft is pointed, measured in degrees clockwise from magnetic north. It differs from true heading by the local magnetic variation.

Related: Heading indicator
Density

The mass of a substance per unit of volume, often stated in grams per cubic centimeter. An object floats in a fluid when its density is less than the fluid's density.

Related: Newton's second law
Newton's second law

The principle that force equals mass times acceleration, so a fixed force produces less acceleration as mass grows. It also explains why weight changes with gravitational strength.

Related: Kinetic energy
Mechanical advantage

The factor by which a simple machine multiplies an applied force, found by dividing output force by input force. Longer lever arms and extra supporting rope segments generally raise it.

Related: Newton's second law
Kinetic energy

The energy an object possesses because of its motion, increasing with the square of its speed. Doubling the speed of an object quadruples its kinetic energy if mass is unchanged.

Related: Newton's second law

AFOQT study plan

8 weeks · About 8 hours per week

Week 1

Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

  • Map the four spatial/speeded subtests and rank them by your current error rate

  • Practice block counting on stacked-cube figures until you can count a 15-cube stack in under 45 seconds

  • Drill rotated blocks in matched pairs, rotating one block mentally and matching it to its rotated twin

  • Time yourself on a 10-minute table-reading set and record your raw score

Your checkpoint

A one-page baseline sheet listing your score, time, and top error pattern for each of the four spatial/speeded subtests

Week 2

Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading & Quantitative - Arithmetic Reasoning and Math Knowledge

  • Increase hidden-figures speed by scanning a 5x5 grid for the target shape before reading answer choices

  • Complete 60 arithmetic reasoning word problems covering rate, ratio, and percent

  • Rehearse math knowledge formulas for area, volume, exponents, and averages from memory

  • Log every spatial miss with a one-line cause note

Your checkpoint

A 40-question spatial/speeded timed set scored above your week-1 baseline, plus a written error log of at least 15 entries

Week 3

Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading & Verbal - Verbal Analogies and Word Knowledge

  • Run two full-length timed spatial/speeded sets back to back to build pacing stamina

  • Build a 100-word vocabulary list from missed word-knowledge items and quiz yourself twice

  • Practice verbal analogies by labeling each pair's relationship type before choosing an answer

  • Cut table-reading time per item to under 20 seconds without losing accuracy

Your checkpoint

A timed spatial/speeded set at or above target accuracy with a written list of all relation types used in 30 analogy items

Week 4

Verbal - Verbal Analogies and Word Knowledge & Quantitative - Arithmetic Reasoning and Math Knowledge

  • Complete 50 word-knowledge items and re-test every missed word to 100 percent recall

  • Solve 40 arithmetic reasoning problems under a 25-minute clock

  • Review math knowledge weak spots in fractions, decimals, and basic algebra

  • Write out analogy-solving steps you will use on test day

Your checkpoint

A 30-item mixed verbal/quantitative quiz scored at or above 80 percent, with a printed review sheet of every missed item

Week 5

Verbal - Verbal Analogies and Word Knowledge & Quantitative - Arithmetic Reasoning and Math Knowledge & Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

  • Cycle through one short timed set in each of the three heavy domains on the same day

  • Add 50 new vocabulary words and review the prior 100

  • Re-drill the two spatial subtests with your highest error rates

  • Track per-domain accuracy to find the weakest remaining area

Your checkpoint

A three-domain scorecard showing accuracy and average time per item for verbal, quantitative, and spatial/speeded

Week 6

Aviation and Instrument Comprehension & Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading

  • Memorize aircraft attitude and instrument indications for pitch, bank, and heading

  • Practice reading instrument panels and translating them into a written flight condition

  • Learn basic aviation vocabulary for control surfaces and flight instruments

  • Keep spatial skills warm with two short block-counting and rotated-block sets

Your checkpoint

A labeled diagram of six instrument conditions drawn from memory and checked against your study notes, scored for accuracy

Week 7

Physical Science & Aviation and Instrument Comprehension

  • Review physical science fundamentals in mechanics, electricity, and fluids

  • Solve 40 physical science practice items and log the concept behind each miss

  • Re-test aviation and instrument comprehension with a timed set

  • Revisit any heavy-domain item you missed in weeks 1 through 6

Your checkpoint

A concept list of 20 physical science topics with a one-sentence rule or formula for each, plus a scored timed aviation set

Week 8

Verbal - Verbal Analogies and Word Knowledge & Quantitative - Arithmetic Reasoning and Math Knowledge & Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading & Aviation and Instrument Comprehension & Physical Science

  • Take two full-length timed practice tests under test-day conditions

  • Review every missed item across all five domains and rank them by frequency

  • Drill only the three highest-frequency error types until they clear

  • Finalize a pacing plan with per-section time targets

Your checkpoint

Two completed full-length practice tests with a written final review sheet listing remaining weak areas and your test-day pacing targets

Milestones

Week 2: Spatial/speeded timed score exceeds the week-1 baseline, and you can state your average seconds per table-reading item

Week 4: Mixed verbal/quantitative quiz at or above 80 percent, with all missed vocabulary re-tested to full recall

Week 6: You can reproduce the six instrument-condition diagram from memory with no reference, while spatial accuracy holds steady

Week 8: Both full-length practice tests completed within time limits, and no domain shows accuracy below your week-1 baseline

AFOQT exam day

Your checklist

Government-issued photo ID

Bring an unexpired, physical photo ID (driver's license, passport, or military ID). Accepted forms and whether a photocopy is permitted vary by testing site - confirm with the provider before test day. Also confirm whether your name on the ID must match your registration exactly.

Test authorization or scheduling confirmation

Bring whatever paperwork your testing office requires (registration/ticket, orders, or a letter of authorization from your commander or ROTC detachment). Ask your test control officer what they need to see at check-in.

Directions, parking, and reporting time

Look up the exact building and room in advance (on-base locations often require a gate pass or sponsor). Confirm your report time with the provider and plan to arrive with a buffer - late arrivals are commonly turned away.

No. 2 pencils and a good eraser

If you are taking the paper version, bring several sharpened pencils. Many sites provide materials and some prohibit outside items, so confirm what is supplied versus what you must bring.

Leave electronics behind or secured

Phones, smartwatches, fitness trackers, earbuds, and calculators are not permitted in the testing room. Plan where they will stay (car or locker) before you check in.

Skip the calculator and reference notes

Do not bring a calculator, formula sheet, or study notes; arithmetic and math items are designed to be done without them. Use whatever scratch paper the administrator issues.

Eyeglasses or contacts, if you use them

Several subtests involve fine visual detail (block counting, rotated blocks, hidden figures, instrument reading). Bring your corrective lenses and any permitted medical items; ask about medication or accommodation procedures in advance.

Water and a snack for breaks

The session is long - typically several hours of timed subtests plus breaks. Confirm whether food and drink are allowed in or near the testing room.

Know the subtest order and time limits

Memorize the sequence and per-subtest time limits from an official source so no section surprises you. Each timed section typically starts and stops on the administrator's call, with no carry-over time.

Plan your pacing targets

Before test day, decide your per-question time budget for the fast sections (table reading, block counting, verbal analogies, word knowledge) and practice hitting it on timed drills.

Decide which composites matter to you

Score reports include percentile ranks and composite scores (e.g., pilot, navigator/CSO, ABM, academic aptitude). Know the minimums for your target career field before you test, since retest opportunities are limited.

Rest and fuel the night before

Prioritize 7–9 hours of sleep, avoid alcohol, and eat a normal breakfast. Cramming new material in the last 24 hours has poor return compared with being alert.

Plan the day

72 hours out

Take one or two full-length, strictly timed practice runs under test-like conditions (no phone, no calculator). Then stop taking new practice tests and spend remaining study time only on your two or three weakest subtests.

72 hours out

Lock in logistics: confirm the address, building, room, report time, ID requirements, gate access, and what the site supplies. Call or email the testing office now if anything is unclear.

72 hours out

Shift your sleep schedule so you are wakeful at your report time, and taper caffeine to your normal baseline.

24 hours out

Do a light review only - formulas you keep forgetting, the subtest order and time limits, and a few short drills. No full practice tests; protect your confidence and energy.

24 hours out

Pack your bag: ID, authorization paperwork, pencils, glasses, snack, and directions. Lay out clothes. Put the phone charger in the car, not the testing room.

24 hours out

Eat a normal dinner, avoid alcohol and heavy late meals, and go to bed at a reasonable hour. Set two alarms.

Morning of

Eat breakfast with protein and moderate caffeine (no more than usual). Hydrate, but not so much that you need extra restroom trips during timed sections.

Morning of

Arrive early - aim for 30 minutes before your report time unless your letter says otherwise. Leave your phone and smartwatch secured outside the testing room.

Morning of

Use the restroom right before you are seated, take a few slow breaths, and remind yourself that unanswered items cannot help you - every item gets an answer.

During the test

Read the administrator's instructions for each subtest carefully; confirm the time limit and item count on each section before you start.

During the test

Work at a steady, pre-planned pace. If an item resists in a few seconds, mark your best answer and move on - nothing is gained by donating time to one question.

During the test

Answer every item. Leave no blanks; if time is nearly gone, fill in remaining answers in the final seconds.

During the test

Use restroom and stretch breaks when offered, and do not attempt to work through a break - the timed sections will not restart for you.

During the test

On the self-description inventory, answer honestly and consistently rather than trying to guess a preferred profile; answer quickly and move on.

Rules to check

  • Bring valid, unexpired government-issued photo identification. The exact list of accepted documents varies by site - confirm with the provider before test day.

  • Do not bring phones, smartwatches, fitness trackers, earbuds, calculators, or notes into the testing room. If you are unsure whether an item is permitted, ask the administrator before you are seated rather than risk being dismissed.

  • Follow the administrator's timing exactly. Each subtest has a fixed limit, you generally may not return to a section once it closes, and you must stop writing or keying the moment time is called.

  • Answer every question. AFOQT scoring is based on items answered correctly, so an unanswered item can never help your score - but confirm the current policy with your test administrator if anything about scoring is unclear.

  • Maintain test security: do not copy, photograph, reconstruct, or discuss specific test content with others. You will likely sign a nondisclosure agreement at check-in.

  • Remain in your seat and in the room during timed sections; leaving mid-section is not permitted. Raise your hand if you need the administrator.

  • Retesting is limited and subject to waiting periods and approval. Confirm eligibility, the number of attempts available to you, and how a prior attempt affects your record with your testing office - do not assume you can simply retake it.

  • Scores are reported as percentile ranks plus composite scores, and score validity periods and how results are released differ by program. Confirm how and when you will receive your results with your test control officer.

AFOQT FAQ

How many AFOQT practice questions are available?

The practice set has 199 AFOQT questions. Each one includes the choices, the correct answer, and an explanation, and the set is free to read with no signup.

How many AFOQT flashcards are available?

The flashcard set has 32 AFOQT cards. Each card shows the term and its definition.

Which topics does the AFOQT study material cover?

The AFOQT study material covers Verbal - Verbal Analogies and Word Knowledge, Quantitative - Arithmetic Reasoning and Math Knowledge, and Spatial and Speeded Processing - Block Counting, Rotated Blocks, Hidden Figures, Table Reading, Aviation and Instrument Comprehension, Physical Science.

What format facts does the catalog list for the AFOQT exam?

The catalog lists these item types: multiple choice, computer-administered at an official testing location, fixed-order subtests with individually timed sections, and one self-report/interest inventory subtest (non-cognitive) for the AFOQT exam.